Recent developments in visible-light photocatalytic degradation of antibiotics

Application of catalytic technology based on the piezoelectric effect in wastewater purification

The demands of human life and industrial activities result in a significant influx of toxic contaminants into aquatic ecosystems. In particular, organic pollutants such as antibiotics and dye molecules, bacteria, and heavy metal ions are represented, posing a severe risk to the health and continued existence of living organisms. The method of removing pollutants from water bodies by utilizing the principle of the piezoelectric effect in combination with chemical catalytic processes is superior to other wastewater purification technologies because it can collect water energy, mechanical energy, etc. to achieve cleanliness and high removal efficiency. Herein, we briefly introduced the piezoelectric mechanisms and then reviewed the latest advances in the design and synthesis of piezoelectric materials, followed by a summary of applications based on the principle of piezoelectric effect to degrade pollutants in water for wastewater purification. Moreover, water purification technologies incorporating the piezoelectric effect, including piezoelectric effect-assisted membrane filtration, activation of persulfate, and battery electrocatalysis are elaborated. Finally, future challenges and research directions for the piezoelectric effect are proposed.

How can heteroatoms boost the performance of photoactive nanomaterials for wastewater purification?

Photocatalysis, as an alternative for treating persistent water pollutants, holds immense promise. However, limitations hinder sustained treatment and recycling under varying light conditions. This comprehensive review delves into the novel paradigm of metal and non-metal doping to overcome these challenges. It begins by discussing the fundamental principles of photocatalysis and its inherent limitations. Understanding these constraints is crucial for developing effective strategies. Band gap narrowing by metal and non-metal doping modifies the band gap, enabling visible-light absorption. Impurity energy levels and oxygen vacancies influenced the doping energy levels and surface defects. Interfacial electron transfer and charge carrier recombination are the most important factors that impact overall efficiency. The comparative analysis of nanomaterials are reviewed on various, including nanometal oxides, nanocarbon materials, and advanced two-dimensional structures. The synthesis process are narratively presented, emphasizing production yields, selectivity, and efficiency. The review has potential applications in the environment for efficient pollutant removal and water purification, economic cost-effective and scalable production and technological advancement catalyst design, in spite of its challenges in material stability, synthesis methods and optimizing band gaps. The novelty of the review paper is on the proposal of a new paradigm of heterojunctions of doped metal and non-metal photocatalysts to promise highly efficient water treatment. This review bridges the gap between fundamental research and practical applications, offering insights into tailored nano photocatalysts.

Defect Engineering of Bi2WO6 for Enhanced Photocatalytic Degradation of Antibiotic Pollutants

Infiltration of excessive antibiotics into aquatic ecosystems plays a significant role in antibiotic resistance, a major global health challenge. It is therefore critical to develop effective technologies for their removal. Herein, defect-rich Bi2WO6 nanoparticles are solvothermally prepared via epitaxial growth on pristine Bi2WO6 seed nanocrystals, and the efficiency of the photocatalytic degradation of ciprofloxacin, a common antibiotic, is found to increase markedly from 62.51% to 98.27% under visible photoirradiation for 60 min. This is due to the formation of a large number of structural defects, where the synergistic interactions between grain boundaries and adjacent dislocations and oxygen vacancies lead to an improved separation and migration efficiency of photogenerated carriers and facilitate the adsorption and degradation of ciprofloxacin, as confirmed in experimental and theoretical studies. Results from this work demonstrate the unique potential of defect engineering for enhanced photocatalytic performance, a critical step in removing antibiotic contaminants in aquatic ecosystems.

Enhanced solar light-driven photocatalysis of norfloxacin using Fe-doped TiO2: RSM optimization, DFT simulations, and toxicity study

This study investigates the photocatalytic degradation of norfloxacin (NFX) utilizing Fe-doped TiO2 nanocomposite under natural sunlight. TiO2-based photocatalysts were synthesized using chemical precipitation varying Fe-dopant concentration and characterized in detail. Theoretical modelling, centred on density functional theory (DFT), elucidated that Fe ions within the TiO2 lattice are effectively confined, thereby narrowing the wide band gap of TiO2. The findings strongly support that Fe3+ ions augmented the photocatalytic activity of TiO2 by facilitating an intermediate interfacial route for electron and hole transfer, particularly up to an optimal dopant concentration of 1.5 M%. Subsequently, a three-level Box-Behnken design (BBD) was developed to determine the initial pH, optimal catalyst concentration, and drug dosage. High-performance liquid chromatography-mass spectrometry (HPLC-MS) was employed to identify reaction intermediates, thereby establishing a potential degradation pathway. Notably, sustained recyclability was achieved, with 82% degradation efficiency maintained over five cycles. Additionally, the toxicity of degradation intermediates was evaluated through bacterial and phytotoxicity tests, affirming the environmental safety of treated water. In vitro toxicity of the nanomaterial was also examined, emphasizing its environmental implications. Scavenger experiments revealed that hole and hydroxyl radicals were the primary active species in Fe-TiO2-based photocatalysis. Furthermore, the antibacterial potential of the synthesized catalyst was assessed using Escherichia coli and Staphylococcus aureus to observe their respective antibacterial responses.

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Recent progress in mineralization of emerging contaminants by advanced oxidation process: A review

Emerging contaminants are chemicals generated due to the usage of pesticide, endocrine disrupting compounds, pharmaceuticals, and personal care products and are liberated into the environment in trace quantities. The emerging contaminants eventually become a greater menace to living beings owing to their wide range and inhibitory action. To diminish these emerging contaminants from the environment, an Advanced Oxidation Process was considered as an efficient option. The Advanced Oxidation Process is an efficient method for mineralizing fractional or generous contaminants due to the generation of reactive species. The primary aim of this review paper is to provide a thorough knowledge on different Advanced Oxidation Process methods and to assess their mineralization efficacy of emerging contaminants. This study indicates the need for an integrated process for enhancing the treatment efficiency and overcoming the drawbacks of the individual Advanced Oxidation Process. Further, its application concerning technical and economic aspects is reviewed. Until now, most of the studies have been based on lab or pilot scale and do not represent the actual scenario of the emerging contaminant mineralization. Thus, the scaling up of the process was discussed, and the major challenges in large scale implementation were pointed out.

Defect engineering for enhanced optical and photocatalytic properties of ZnS nanoparticles synthesized by hydrothermal method

Defect engineering is a promising method for improving light harvesting in photocatalytic materials like Zinc sulphide (ZnS). By altering the S/Zn molar ratio during hydrothermal processes, Zn and S defects are successfully introduced into the ZnS crystal. The band structures can be modified by adding defects to the crystal structure of ZnS samples. During the treatment process, defects are formed on the surface. XRD and Raman studies are used for the confirmation of the crystallinity and phase formation of the samples. Using an X-ray peak pattern assessment based on the Debye Scherer model, the Williamson-Hall model, and the size strain plot, it was possible to study the influence of crystal defect on the structural characteristics of ZnS nanoparticles. The band gap (Eg) values were estimated using UV-Vis diffuse spectroscopy (UV-Vis DRS) and found that the Eg is reduced from 3.28 to 3.49 eV by altering the S/Zn molar ratio. Photoluminescence study (PL) shows these ZnS nanoparticles emit violet and blue radiations. In keeping with the results of XRD, TEM demonstrated the nanoscale of the prepared samples and exhibited a small agglomeration of homogenous nanoparticles. Scanning electron microscopy (SEM) was used to examine the surface morphology of the ZnS particles. Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and X-ray photoelectron spectroscopy (XPS) were used to evaluate and validate the elemental composition. XPS results indicate the presence of defects on the prepared ZnS nanoparticles. For the investigation of vacancy-dependent catalytic activity under exposure to visible light, defective ZnS with different quantities of Zn and S voids are used as catalysts. The lowest S/Zn sample, ZnS0.67 and the highest S/Zn sample, ZnS3, show superior photocatalytic activity.

Enhanced hydroxyl radical generation for micropollutant degradation in the In2O3/Vis-LED process through the addition of periodate

Periodate (PI) as an oxidant has been extensively studied for organic foulants removal in advanced oxidation processes. Here PI was introduced into In2O3/Vis-LED process to enhance the formation of ·OH for promoting the degradation of organic foulants. Results showed that the addition of PI would significantly promote the removal of sulfamethoxazole (SMX) in the In2O3/Vis-LED process (from 9.26% to 100%), and ·OH was proved to be the dominant species in the system. Besides, the process exhibited non-selectivity in the removal of different organic foulants. Comparatively, various oxidants (e.g., peroxymonosulfate, peroxydisulfate, and hydrogen peroxide) did not markedly promote the removal of SMX in the In2O3/Vis-LED process. Electrochemical analyses demonstrated that PI could effectively receive photoelectrons, thus inhibiting the recombination of photogenerated electron-hole (e-/h+) pairs. The holes then oxidized the adsorbed H2O to generate ·OH, and the PI converted to iodate at the same time. Additionally, the removal rate of SMX reduced from 100% to 17.2% as Vis-LED wavelengths increased from 440 to 560 nm, because of the low energy of photons produced at longer wavelengths. Notably, the species of PI do not affect its ability to accept electrons, resulting in the degradation efficiency of SMX irrespective of pH (4.0-10.0). The coexistence of inorganic cations and anions (such as Cl-, CO32-/HCO3-, SO42-, Ca2+, and Mg2+) also had an insignificant effect on SMX degradation. Furthermore, the process also showed excellent degradation potential in real water. The proposed strategy provides a new insight for visible light-catalyzed activation of PI and guidance to explore green catalytic processes for high-efficiency removal of various organic foulants.

Photocatalytic degradation of a typical macrolide antibiotic roxithromycin using polypropylene fibre sheet supported N-TiO2/graphene oxide composite materials

The post-treatment of recycling the fine photocatalyst nanoparticles restricts their application. In this study, a new photocatalytic material was synthesized by immobilizing the N-doped TiO2 and graphene oxide (GO) composite on polypropylene (PP) (N-TiO2/GO/PP) fibre sheet, and characterized based on X-ray diffraction spectroscopy (XRD), Raman spectroscopy and Scanning Electron Microscope (SEM). The photocatalytic activity was evaluated using roxithromycin (ROX) as a typical antibiotic pollutant. XRD, Raman spectra and SEM images proved that N-TiO2/GO/PP fibre sheet was successfully synthesized. The photocatalytic degradation of 10 mg L-1 ROX can reach up to 90% and the degradation rate constant was 0.2299 h-1 in surface water with the application amount of TiO2/GO/PP fibre sheet of 24.6 cm × 2.7 cm and reaction time of 9 h under the irradiation of simulated sunlight. The application amount of TiO2/GO/PP fibre sheet, initial concentration of ROX and water matrix significantly affect the degradation of ROX. A low concentration of natural organic matter (NOM) slightly promoted the degradation of ROX, while a high concentration of NOM significantly inhibited the degradation of ROX. Alkaline condition (pH 8-9) is favourable for the photocatalytic degradation of ROX by TiO2/GO/PP fibre sheet. The photocatalytic reactivity of the TiO2/GO/PP fibre sheet showed no significant decrease after three runs. Two primary degradation products of ROX were identified and they showed lower ecotoxicity than ROX. The results demonstrate that the new synthesized TiO2/GO/PP fibre sheet shows promising application prospects in the treatment of antibiotics in wastewater and surface waters.

2D/2D Biochar/Bi2WO6 Hybrid Nanosheets with Enhanced Visible-Light-Driven Photocatalytic Activities for Organic Pollutants Degradation

In this work, a novel two-dimensional/two-dimensional (2D/2D) hybrid photocatalyst consisting of Bi2WO6 (BWO) nanosheets and cotton fibers biochar (CFB) nanosheets was successfully prepared via a facile hydrothermal process. The as-prepared photocatalysts were characterized by a variety of techniques, including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectroscopy. It was revealed that amorphous CFB nanosheets were uniformly immobilized on the surface of crystalline BWO nanosheets, and an intimate contact between CFB and BWO was constructed. The photocatalytic activities of the prepared BWO and CFB-BWO photocatalysts were evaluated by photocatalytic degradation of rhodamine B (RhB) and tetracycline hydrochloride (TC-HCl) in aqueous solutions under visible-light irradiation. Compared to the pristine BWO, the CFB-BWO composite photocatalysts exhibited significant enhancement in photocatalytic activities. Among all CFB-BWO samples, the 9CFB-BWO sample with the CFB mass ratio of 9% exhibited optimal photocatalytic activities for RhB or TC-HCl degradation, which was ca. 1.8 times or 2.4 times that of the pristine BWO, respectively. The improvement in photocatalytic activities of the CFB-BWO photocatalysts could be ascribed to the enhanced migration and separation of photogenerated charge carriers due to the formation of a 2D/2D interfacial heterostructure between CFB and BWO. Meanwhile, the possible mechanism of CFB-BWO for enhanced photocatalytic performance was also discussed. This work may provide a new approach to designing and developing novel BWO-based photocatalysts for the highly efficient removal of organic pollutants.

Bi2O3-Doped WO3 Nanoparticles Decorated on rGO Sheets: Simple Synthesis, Characterization, Photocatalytic Performance, and Selective Cytotoxicity toward Human Cancer Cells

Graphene derivatives and metal oxide-based nanocomposites (NCs) are being studied for their diverse applications including gas sensing, environmental remediation, and biomedicine. The aim of the present work was to evaluate the effect of rGO and Bi₂O₃ integration on photocatalytic and anticancer efficacy. A novel Bi₂O₃-WO₃/rGO NCs was successfully prepared via the precipitation method. X-ray crystallography (XRD) data confirmed the crystallographic structure and the phase composition of the prepared samples. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis confirmed the loading of Bi₂O₃-doped WO₃ NPs on rGO sheets. Energy-dispersive X-ray (EDX) results confirmed that all elements of carbon (C), oxygen (O), tungsten (W), and bismuth (Bi) were present in Bi₂O₃-WO₃/rGO NCs. The oxidation state and presence of elemental compositions in Bi₂O₃-WO₃/rGO NCs were verified by the X-ray photoelectron spectroscopy (XPS) study. Raman spectra indicate a reduction in carbon-oxygen functional groups and an increase in the graphitic carbon percentage of the Bi₂O₃-WO₃/rGO NCs. The functional group present in the prepared samples was examined by Fourier transform infrared (FTIR) spectroscopy. UV analysis showed that the band gap energy of the synthesized samples was slightly decreased with Bi₂O₃ and rGO doping. Photoluminescence (PL) spectra showed that the recombination rate of the electron-hole pair decreased with the dopants. Degradation of RhB dye under UV light was employed to evaluate photocatalytic performance. The results showed that the Bi₂O₃-WO₃/rGO NCs have high photocatalytic activity with a degradation rate of up to 91%. Cytotoxicity studies showed that Bi₂O₃ and rGO addition enhance the anticancer activity of WO₃ against human lung cancer cells (A549) and colorectal cancer cells (HCT116). Moreover, Bi₂O₃-WO₃/rGO NCs showed improved biocompatibility in human umbilical vein endothelial cells (HUVECs) than pure WO₃ NPs. The results of this work showed that Bi₂O₃-doped WO₃ particles decorated on rGO sheets display improved photocatalytic and anticancer activity. The preliminary data warrants further research on such NCs for their applications in the environment and medicine.

Construction of 2D/2D Mesoporous WO3/CeO2 Laminated Heterojunctions for Optimized Photocatalytic Performance

Photocatalytic elimination of antibiotics from the environment and drinking water is of great significance for human health. However, the efficiency of photoremoval of antibiotics such as tetracycline is severely limited by the prompt recombination of electron holes and slow charge migration efficacy. Fabrication of low-dimensional heterojunction composites is an efficient method for shortening charge carrier migration distance and enhancing charge transfer efficiency. Herein, 2D/2D mesoporous WO₃/CeO₂ laminated Z-scheme heterojunctions were successfully prepared using a two-step hydrothermal process. The mesoporous structure of the composites was proved by nitrogen sorption isotherms, in which sorption-desorption hysteresis was observed. The intimate contact and charge transfer mechanism between WO₃ nanoplates and CeO₂ nanosheets was investigated using high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy measurements, respectively. Photocatalytic tetracycline degradation efficiency was noticeably promoted by the formation of 2D/2D laminated heterojunctions. The improved photocatalytic activity could be attributed to the formation of Z-scheme laminated heterostructure and 2D morphology favoring spatial charge separation, confirmed by various characterizations. The optimized 5WO₃/CeO₂ (5 wt.% WO₃) composites can degrade more than 99% of tetracycline in 80 min, achieving a peak TC photodegradation efficiency of 0.0482 min^-1, which is approximately 3.4 times that of pristine CeO₂. A Z-scheme mechanism is proposed for photocatalytic tetracycline by from WO₃/CeO₂ Z-scheme laminated heterojunctions based on the experimental results.

Construction of SrTiO3-BiOCl composite catalyst via facial microwave hydrothermal for highly efficient photocatalytic activity towards organic compounds degradation

This work mainly focuses on the preparation and performance study of SrTiO₃-BiOCl composite photocatalysis. The SrTiO₃-BiOCl photocatalysts are prepared via the facial microwave hydrothermal method. XRD, UV-vis DRS, SEM, TEM, XPS, N₂ adsorption and desorption isothermal experiment, FT-IR, and PL are applied to characterize the prepared samples. The spherical particles of SrTiO₃ grow on the flaky BiOCl, and the crystal size is uniform and evenly disperses on the BiOCl. The catalytic performance of the samples was evaluated over the degradation rates of methylene blue(MB). Typically, the clearance rates of MB reached to 99.65% over SrTiO₃-BiOCl-50% under visible light, which was much higher than that of SrTiO₃ and BiOCl (55.86%, 79.79%, respectively). The active species capturing experiments and ESR showed that the holes (h⁺) and ·OH are playing the main roles in the degradation process.

Direct Z-scheme P-TiO2/g-C3N4 heterojunction for the photocatalytic degradation of sulfa antibiotics

The construction of direct Z-scheme heterojunctions with high photocatalytic degradation ability is important for wastewater treatment, but there are still many unsolved challenges. In this article, we report the fabrication of a Z-scheme P-TiO₂/g-C₃N₄ (CNPT-X) heterostructure by the calcination method. Under simulated sunlight, CNPT-X composites are found to show excellent degradation performance against sulfonamide antibiotics sulfadiazine (SD), sulfamethazine (SM2), sulfamonomethoxine (SMM), and sulfamethoxazole (SMZ). CNPT-3 (400 mg L^-1) can be used to degrade four sulfa antibiotics within 90 min, with a degradation rate as high as 99%, which is higher than that for P-TiO₂ and g-C₃N₄ alone. The internal electron transfer paths and mechanisms for the composites are revealed by ESR radical detection experiments, XPS energy spectrum shifts, valence band positions and active material quenching experiments. Furthermore, the degradation products are analyzed by GC-MS, and four possible degradation pathways for sulfonamide pollutants are proposed. This photocatalyst provides new insights into the fundamental aspects of the photocatalytic degradation mechanism for composite pollutants, as well as new ideas for practical environmental applications.

Recent Advances in Carbon-Based Materials for Adsorptive and Photocatalytic Antibiotic Removal

Antibiotics have been a primary environmental concern due to their widespread dispersion, harmful bioaccumulation, and resistance to mineralization. Unfortunately, typical processes in wastewater treatment plants are insufficient for complete antibiotic removal, and their derivatives in effluent can pose a threat to human health and aquatic communities. Adsorption and photocatalysis are proven to be the most commonly used and promising tertiary treatment methods. Carbon-based materials, especially those based on graphene, carbon nanotube, biochar, and hierarchical porous carbon, have attracted much attention in antibiotic removal as green adsorbents and photocatalysts because of their availability, unique pore structures, and superior physicochemical properties. This review provides an overview of the characteristics of the four most commonly used carbonaceous materials and their applications in antibiotic removal via adsorption and photodegradation, and the preparation of carbonaceous materials and remediation properties regarding target contaminants are clarified. Meanwhile, the fundamental adsorption and photodegradation mechanisms and influencing factors are summarized. Finally, existing problems and future research needs are put forward. This work is expected to inspire subsequent research in carbon-based adsorbent and photocatalyst design, particularly for antibiotics removal.

Photocatalytic Degradation of Some Typical Antibiotics: Recent Advances and Future Outlooks

The existence of antibiotics in the environment can trigger a number of issues by fostering the widespread development of antimicrobial resistance. Currently, the most popular techniques for removing antibiotic pollutants from water include physical adsorption, flocculation, and chemical oxidation, however, these processes usually leave a significant quantity of chemical reagents and polymer electrolytes in the water, which can lead to difficulty post-treating unmanageable deposits. Furthermore, though cost-effectiveness, efficiency, reaction conditions, and nontoxicity during the degradation of antibiotics are hurdles to overcome, a variety of photocatalysts can be used to degrade pollutant residuals, allowing for a number of potential solutions to these issues. Thus, the urgent need for effective and rapid processes for photocatalytic degradation leads to an increased interest in finding more sustainable catalysts for antibiotic degradation. In this review, we provide an overview of the removal of pharmaceutical antibiotics through photocatalysis, and detail recent progress using different nanostructure-based photocatalysts. We also review the possible sources of antibiotic pollutants released through the ecological chain and the consequences and damages caused by antibiotics in wastewater on the environment and human health. The fundamental dynamic processes of nanomaterials and the degradation mechanisms of antibiotics are then discussed, and recent studies regarding different photocatalytic materials for the degradation of some typical and commonly used antibiotics are comprehensively summarized. Finally, major challenges and future opportunities for the photocatalytic degradation of commonly used antibiotics are highlighted.

Impact of Antibiotics as Waste, Physical, Chemical, and Enzymatical Degradation: Use of Laccases

The first traces of Tetracycline (TE) were detected in human skeletons from Sudan and Egypt, finding that it may be related to the diet of the time, the use of some dyes, and the use of soils loaded with microorganisms, such as Streptomyces spp., among other microorganisms capable of producing antibiotics. However, most people only recognise authors dating between 1904 and 1940, such as Ehrlich, Domagk, and Fleming. Antibiotics are the therapeutic option for countless infections treatment; unfortunately, they are the second most common group of drugs in wastewaters worldwide due to failures in industrial waste treatments (pharmaceutics, hospitals, senior residences) and their irrational use in humans and animals. The main antibiotics problem lies in delivered and non-prescribed human use, use in livestock as growth promoters, and crop cultivation as biocides (regulated activities that have not complied in some places). This practice has led to the toxicity of the environment as antibiotics generate eutrophication, water pollution, nutrient imbalance, and press antibiotic resistance. In addition, the removal of antibiotics is not a required process in global wastewater treatment standards. This review aims to raise awareness of the negative impact of antibiotics as residues and physical, chemical, and biological treatments for their degradation. We discuss the high cost of physical and chemical treatments, the risk of using chemicals that worsen the situation, and the fact that each antibiotic class can be transformed differently with each of these treatments and generate new compounds that could be more toxic than the original ones; also, we discuss the use of enzymes for antibiotic degradation, with emphasis on laccases.

Elimination of amoxicillin using zeolite Y-sea salt as a good catalyst for activation of hydrogen peroxide: Investigating degradation pathway and the effect of wastewater chemistry

The sea contains elements that can play a useful role in catalyzing reactions. Therefore, this research was done to focus on eliminating amoxicillin (AMX) from wastewater utilizing zeolite Y- sea salt catalyst in the presence of H₂O₂. The influences of furnace temperature (200-500 °C) and time duration in the furnace (1-4 h) were optimized during catalyst generation. Also, the effects of different parameters on AMX removal, such as pH (5.0-9.0), catalyst dose (0-10 g.L^-1), AMX concentration (50-300 mg.L^-1), contact time (10-130 min), and H₂O₂ concentration (0-6 mL/100 mL distilled water) were investigated. Different analyses like Brunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were conducted to reveal catalyst properties. The BET-specific surface area of the catalyst (12.69 m²g^-1) insignificantly (p-value > 0.05) changed after AMX removal (13.04 m²g^-1), indicating the strength of the prepared catalyst. The active groups of N-H, O-H-O, O-Si-O, C-H, Si-O-Si, and Si-O-Al were determined in the catalyst structure. The highest removal of AMX (93%) was achieved in the zeolite-sea salt/H₂O₂ system at a pH level of 6.0 and an H₂O₂ concentration of 0.1 mL/100 mL. Elimination of the AMX followed pseudo-first-order kinetics. The catalyst was reclaimed up to 7 times and the removal efficiency was suitable up to the fifth stage. The by-products and reaction pathways were investigated by gas chromatography-mass spectrometry (GC-MS). The results showed that zeolite-sea salt can be utilized as an H₂O₂ activator for the effective degradation of AMX from wastewater.

High-pressure Bandgap Engineering and Amorphization in TiNb2O7 Single Crystals

Titanium niobate (TiNb2O7) possesses excellent photocatalytic, dielectric properties, and lithium-insertion capacity. And high-pressure (HP) is a powerful tool for bandgap engineering aiming at widening their applications. Herein, we report the...

One-pot hydrothermal synthesis of CuBi2O4/BiOCl p–n heterojunction with enhanced photocatalytic performance for the degradation of tetracycline hydrochloride under visible light irradiation

The formation of a CuBi2O4/BiOCl p–n heterojunction enhances visible light absorption and promotes the separation of photogenerated electron–hole pairs.

Graphene-based materials for metronidazole degradation: A comprehensive review

Due to its cytotoxic effect, metronidazole (MNZ) is a drug commonly used to treat bacterial, protozoal, and microaerophilic bacterial infections. After consumption, it undergoes a series of metamorphic reactions that lead to the degradation of oxidized, acetylated, and hydrolyzed metabolites in the environment. To eliminate such pollutants, due to their high potential, adsorption and photocatalysis extensive processes are used in which graphene can be used to improve efficiency. This review analyses the use of graphene as an absorbent and catalyst with a focus on absorption and photocatalytic degradation of MNZ by graphene-based materials (GBMs). The parameters affecting the adsorption, and photocatalytic degradation of MNZ are investigated and discussed. Besides, the basic mechanisms occurring in these processes are summarized and analyzed. This work provides a theoretical framework that can direct future research in the field of MNZ removal from aqueous solutions.

Facile synthesis of magnetic framework composite MgFe2O4@UiO-66(Zr) and its applications in the adsorption-photocatalytic degradation of tetracycline

Recently, metal-organic framework (MOF)-based hybrid composites have attracted significant attention in photocatalytic applications. In this work, MgFe₂O₄@UiO-66(Zr) (MFeO@UiO) composites with varying compositions were successfully synthesized via facile in situ assemblies. Depositing the UiO-66(Zr) framework onto ferrite nanoparticles yielded a composite structure having a lower bandgap energy (2.28-2.60 eV) than that of the parent UiO-66(Zr) (~3.8 eV). Moreover, the MFeO@UiO composite exhibited magnetic separation property and improved porosity. The removal experiment for tetracycline (TC) in aqueous media revealed that the MFeO@UiO composite exhibited a high total TC removal efficiency of ca. ~94% within 45-min preadsorption and 120-min visible-light illumination, which is higher than that of pristine ferrite and UiO-66(Zr). The enhanced photodegradation efficiency of MFeO@UiO is attributed to efficient interfacial charge transfer at the heterojunction and the synergistic effect between the semiconductors. Radical scavenging experiments revealed that photogenerated holes (h⁺) and hydroxyl radicals (·OH) were the major reactive species involved in TC photodegradation. Moreover, the prepared MFeO@UiO nanocomposite showed good recyclability and renewability, making it a potential material for wastewater treatments.

Reusable Ag@TiO2-Based Photocatalytic Nanocomposite Membranes for Solar Degradation of Contaminants of Emerging Concern

Two significant limitations of using TiO2 nanoparticles for water treatment applications are reduced photocatalytic activity under visible radiation and difficulty recovering the particles after use. In this study, round-shaped Ag@TiO2 nanocomposites with a ≈21 nm diameter and a bandgap energy of 2.8 eV were synthesised by a deposition-precipitation method. These nanocomposites were immobilised into a porous poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) matrix and well-distributed within the pores. The photocatalytic activity of Ag@TiO2/PVDF-HFP against metronidazole (MNZ) under solar radiation was evaluated. Further, an adaptive neuro-fuzzy inference system (ANFIS) was applied to predict the effect of four independent variables, including initial pollutant concentration, pH, light irradiation intensity, and reaction time, on the photocatalytic performance of the composite membrane on MNZ degradation. The 10% Ag@TiO2/PVDF-HFP composite membrane showed a maximum removal efficiency of 100% after 5 h under solar radiation. After three use cycles, this efficiency remained practically constant, demonstrating the membranes' reusability and suitability for water remediation applications.

Enhanced photocatalytic degradation activity of Z-scheme heterojunction BiVO4 /Cu/g-C3 N4 under visible light irradiation

A novel BiVO₄ /Cu/g-C₃ N₄ heterostructure photocatalyst was synthesized by thermal condensation, hydrothermal, and in situ precipitation method. The microscopic morphology and chemical composition of the synthesized samples were analyzed by XRD, SEM, FT-IR, XPS, and other characterizations. BiVO₄ /Cu/g-C₃ N₄ (BiVO₄ /Cu:g-C₃ N₄ mass ratio was 1:1) photocatalyst had the optimal photocatalytic degradation activity for tetracycline (TC) wastewater under visible light irradiation (120 min, 74.8%). The introduction of Cu and Z-scheme heterojunction was further confirmed by UV-vis, PL, EIS, and capture mechanism analysis, which effectively accelerated the separation and transfer rate of photogenerated electron holes and enhanced the strong oxidation of h⁺ and •O₂ ^- active species. BiVO₄ /Cu/g-C₃ N₄ heterojunction photocatalytic material has potential application value in the removal of refractory pollutants in wastewater. PRACTITIONER POINTS: A novel Z-scheme BiVO₄ /Cu/g-C₃ N₄ photocatalyst with excellent photocatalytic activities and stability was prepared to treat tetracycline (TC) wastewater. 1:1 CBCN (BiVO₄ /Cu:g-C₃ N₄ mass ratio was 1:1) photocatalyst exhibited the highest photocatalytic performance for TC wastewater. The Z-scheme heterojunction and Cu act as the interfacial charge transfer medium accelerated the transfer and separation of carriers.

Flower-Like Dual-Defective Z-Scheme Heterojunction g-C3N4/ZnIn2S4 High-Efficiency Photocatalytic Hydrogen Evolution and Degradation of Mixed Pollutants

Graphitic carbon nitride (g-C₃N₄) with a porous nano-structure, nitrogen vacancies, and oxygen-doping was prepared by the calcination method. Then, it was combined with ZnIn₂S₄ nanosheets containing zinc vacancies to construct a three-dimensional (3D) flower-like Z-scheme heterojunction (pCN-N/ZIS-Z), which was used for photocatalytic hydrogen evolution and the degradation of mixed pollutants. The constructed Z-scheme heterojunction improved the efficiency of photogenerated charges separation and migration, and the large surface area and porous characteristics provided more active sites. Doping and defect engineering can change the bandgap structure to improve the utilization of visible light, and can also capture photogenerated electrons to inhibit recombination, so as to promote the use of photogenerated electron-hole pairs in the photocatalytic redox process. Heterojunction and defect engineering synergized to form a continuous and efficient conductive operation framework, which achieves the hydrogen production of pCN-N/ZIS-Z (9189.8 µmol·h^-1·g^-1) at 58.9 times that of g-C₃N₄ (155.9 µmol·h^-1·g^-1), and the degradation rates of methyl orange and metronidazole in the mixed solution were 98.7% and 92.5%, respectively. Our research provides potential ideas for constructing a green and environmentally friendly Z-scheme heterojunction catalyst based on defect engineering to address the energy crisis and environmental restoration.

Efficient degradation of tetracycline by RGO@black titanium dioxide nanofluid via enhanced catalysis and photothermal conversion

The applications of photocatalytic pollutant degradation have remained limited due to the low efficiency of solar energy utilization. In this study, a photothermal catalyst consisting of reduced graphene oxide @ black TiO₂ (RGO@BT) nanofluid with effective full-spectrum (from ultraviolet to infrared light) absorption was synthesized by a typical two-step method of high temperature calcination and hydrothermal method. Moreover, the photothermal catalytic performance of the RGO@BT nanofluid on tetracycline was verified. Compared with individual processes (i.e, photocatalysis and thermocatalysis), the photothermal catalytic process significantly enhanced tetracycline degradation under simulated global standard spectrum sunlight (AM 1.5G, 1000 W m^-2). The maximum photothermal conversion efficiency reached 91.8%, which resulted in 94.7% tetracycline degradation (40 mg L^-1) after 120 min of treatment with 200 mg L^-1 RGO@BT nanofluid. Holes, OH, and O₂^- were found to be the main active species during the photothermal catalytic process. Moreover, heat was spontaneously converted from light energy without the use of any external energy source. The elevated system temperature facilitated the tetracycline degradation based on the Arrhenius behavior. These findings provide insights into the improvement of photocatalytic efficiency in organic contaminant degradation via solar energy-efficient photothermal conversion materials.

In-situ responses of phytoplankton to graphene photocatalysis in the eutrophic lake Xingyun, southwestern China

Graphene photocatalysis is receiving increased attention for its potential to be used as a novel green technology for mitigating harmful algae in highly eutrophic waters. However, graphene is seldom applied to in situ aquatic ecosystems for environmental applications. Here, the impacts of graphene photocatalysis on phytoplankton and environmental conditions were evaluated through an in situ macrocosm experiment in the eutrophic Lake Xingyun, southwestern China. The graphene photocatalysis treated area had significantly reduced conductivity, total nitrogen (TN), total phosphorus (TP) and dissolved phosphorus concentrations, as well as increased dissolved oxygen (DO) concentrations. The abundances of all species of the genus Microcystis were significantly reduced in the graphene photocatalysis-treated area; in contrast, the abundances of all species of the diazotrophic genera, including Anabaena and Aphanizomenon, greatly increased after treatment with graphene photocatalysis. Eukaryotic algae, especially Chlorophyta, Euglenophyta and Pyrrophyta, as well as Cryptophyta, had significantly higher abundances in the graphene photocatalysis-treated area, whereas most of the eutrophic diatom species had lower abundances in the treated area. These observed differences in eukaryotic algae between the two groups might be related to their sensitivity to graphene photocatalysis and their tolerance of nutrients. Generally, graphene photocatalysis can make a great contribution to the improvement of eutrophic water, as evidenced by the reduction in cyanobacteria abundance and phosphorus concentration, as well as the increase in species richness and the dissolved oxygen concentration in the treated area. However, the mechanisms underlying these differences in phytoplankton community structure and environmental conditions require further study.

Fabrication, functionalization and advanced applications of magnetic hollow materials in confined catalysis and environmental remediation

Magnetic hollow-structured functional hybrid materials with unique architectures and preeminent properties have always been an area of extensive research. They represent a subtle collaboration of hollow architecture, mesoporous nanostructure and magnetic character. Owing to the merits of a large void space, low density, high specific surface area, well-defined active sites and facile magnetic recovery, these materials present promising application projections in numerous fields, such as drug delivery, adsorption, storage, catalysis and many others. In this review, recent progress in the design, synthesis, functionalization and applications of magnetic hollow-meso/nanostructured materials are discussed. The first part of the review has been dedicated to the preparation and functionalization of the materials. The synthetic protocols have been broadly classified into template-assisted and template-free methods and major trends in their synthesis have been elaborated in detail. Furthermore, the benefits and drawbacks of each method are compared. The later part summarizes the application aspects of confined catalysis in organic transformations and environmental remediation such as degradation of organic pollutants, dyes and antibiotics and adsorption of heavy metal ions. Finally, an outlook of future directions in this research field is highlighted.

Removal of amoxicillin from wastewater in the presence of H2O2 using modified zeolite Y- MgO catalyst: An optimization study

In this paper, Zeolite-MgO was generated using alkali-thermal method and was utilized as a catalyst to decrease amoxicillin (AMX) concentration in the presence of H₂O₂ from wastewater. Different tests like Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy-energy dispersive X-ray analysis (FESEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were done to determine catalyst properties. Active groups of C-S-C, CO, CC, C-N, C-O, N-O, and N-H were identified in catalyst frame. According to XRD results, lower crystallinity of nanoparticles after modification of zeolite by MgO can lead to improvement of AMX removal. Active surface of zeolite (2.32 m²/g) was increased after optimization by MgO to 2.96 m²/g, indicating an increase in the catalyst capacity for activation of H₂O₂. In addition, furnace temperature (200-500 °C), residence time in the furnace (1-4 h), and Mg(NO₃)₂: zeolite ratio (0.25: 2, 0.5:2, 1:2 w/w) were studied to achieve the optimized catalyst for AMX removal. Different parameters like pH (5-9), H₂O₂ concentration (0-6 mL/100 mL), dose of catalyst (0-10 g/L), AMX concentration (50-300 mg/L), and reaction time (10-130 min) were also studied. The best efficiency (97.9%) of AMX removal was achieved at acidic pH with the lowest amount of H₂O₂ (0.1 mL/100 mL) and 7 g/L of catalyst. AMX removal using the developed process followed pseudo-first-order kinetics. Reclaimable Zeolite-MgO catalyst can be effectively utilized in wastewater works.

Efficient removal of levofloxacin from different water matrices via simultaneous adsorption and photocatalysis using a magnetic Ag3PO4/rGO/CoFe2O4 catalyst

A magnetic Ag₃PO₄/rGO/CoFe₂O₄ ternary catalyst was firstly prepared and used for removing levofloxacin (LVF) from different water matrices via simultaneous adsorption and photocatalysis. Compared with Ag₃PO₄ and Ag₃PO₄/CoFe₂O₄, Ag₃PO₄/rGO/CoFe₂O₄ shows a superior adsorption-photocatalysis performance for LVF elimination since rGO component not only improves the adsorption ability but also enhances the charge separation efficiency of the catalyst. About 90.7% of LVF in distilled water (10 mg/L) was removed by the ternary catalyst after adsorption for 0.5 h and photocatalysis for 1.0 h, and the removal of LVF performed well in the pH range of 3.51-9.47. Singlet oxygen (¹O₂) was the major reactive oxygen species for LVF degradation in Ag₃PO₄/rGO/CoFe₂O₄ system under visible light, as confirmed by the quenching experiments and ESR study. Based on the detected intermediates in the photocatalytic process, the possible LVF degradation pathways were well-established. As-synthesized Ag₃PO₄/rGO/CoFe₂O₄ can also efficiently remove LVF from the different real water matrices (river water, lake water and secondary effluent) via simultaneous adsorption and photocatalysis. Moreover, magnetic Ag₃PO₄/rGO/CoFe₂O₄ can be easily recovered and effectively reused for the removal of LVF in actual water bodies.

Review on the Visible Light Photocatalysis for the Decomposition of Ciprofloxacin, Norfloxacin, Tetracyclines, and Sulfonamides Antibiotics in Wastewater

Antibiotics are chemical compounds that are used to kill or prevent bacterial growth. They are used in different fields, such as the medical field, agriculture, and veterinary. Antibiotics end up in wastewater, which causes the threat of developing antibacterial resistance; therefore, antibiotics must be eliminated from wastewater. Different conventional elimination methods are limited due to their high cost and effort, or incomplete elimination. Semiconductor-assisted photocatalysis arises as an effective elimination method for different organic wastes including antibiotics. A variety of semiconducting materials were tested to eliminate antibiotics from wastewater; nevertheless, research is still ongoing due to some limitations. This review summarizes the recent studies regarding semiconducting material modifications for antibiotic degradation using visible light irradiation.

Hydrothermal Cobalt Doping of Titanium Dioxide Nanotubes towards Photoanode Activity Enhancement

Doping and modification of TiO2 nanotubes were carried out using the hydrothermal method. The introduction of small amounts of cobalt (0.1 at %) into the structure of anatase caused an increase in the absorption of light in the visible spectrum, changes in the position of the flat band potential, a decrease in the threshold potential of water oxidation in the dark, and a significant increase in the anode photocurrent. The material was characterized by the SEM, EDX, and XRD methods, Raman spectroscopy, XPS, and UV-Vis reflectance measurements. Electrochemical measurement was used along with a number of electrochemical methods: chronoamperometry, electrochemical impedance spectroscopy, cyclic voltammetry, and linear sweep voltammetry in dark conditions and under solar light illumination. Improved photoelectrocatalytic activity of cobalt-doped TiO2 nanotubes is achieved mainly due to its regular nanostructure and real surface area increase, as well as improved visible light absorption for an appropriate dopant concentration.

MOF-derived core/shell C-TiO2/CoTiO3 type II heterojunction for efficient photocatalytic removal of antibiotics

A novel core/shell C-TiO₂/CoTiO₃ type II heterojunction was successfully synthesized via a direct calcination method by using MIL-125/Co core-shell nanocakes as a sacrificial template and precursor. In the calcination process, the organic ligand in MIL-125 acts as an in-situ carbon doping source to form a carbon-doped TiO₂ core (C-TiO₂). At the same time, CoTiO₃ nanoparticles are formed on the surface of C-TiO₂ by an in-situ solid-state reaction between the C-TiO₂ and Co²⁺ shell of MIL-125/Co. Due to such delicate core/shell structural features, carbon doping and type II heterojunctions, C-TiO₂/CoTiO₃ core/shell composites can effectively harvest visible light, facilitate the interfacial separation and suppress the recombination of photogenerated electron-hole pairs, leading to the remarkable photocatalytic activity for removal of ciprofloxacin (CIP). In particular, C-TiO₂/CoTiO₃-3 exhibits the best photocatalytic degradation activity of CIP with a degradation efficiency of 99.6% and a total carbon content removal percentage of 76% under visible-light illumination for 120 min. In addition, the proposed photocatalytic mechanism study illustrated that the main radical species in the photocatalytic degradation of CIP using C-TiO₂/CoTiO₃ as the photocatalyst is •OH. This work provides a new approach and insight for synthesizing core/shell heterojunction-based photocatalysts for various applications.

Bi/SnO2/TiO2-graphene nanocomposite photocatalyst for solar visible light-induced photodegradation of pentachlorophenol

In this study, for the first time, a TiO₂/graphene (G) heterostructure was synthesized and doped by Bi and SnO₂ nanoparticles through a hydrothermal treatment. The as-synthesized nanocomposite was employed for photocatalytic degradation of pentachlorophenol (PCP) under visible light irradiation. Structural characterizations such as X-ray photoelectron spectroscopy (XPS) and X-ray diffraction spectroscopy (XRD) proved the valence band alignment at Bi/SnO₂/TiO₂-G interfaces and crystallinity of the nanocomposite, respectively. The as-developed nanocomposite photocatalyst was able to decompose 84% PCP, thanks to the generation of a large number of active OH^•- and O₂^•- radicals. To achieve this optimum photodegradation efficiency, various parameters such as pH, catalyst dosage, and PCP concentration were optimized. The results showed that the PCP photodegradation process followed the first-order kinetic model and the reaction rate constant rose from 0.007 min^-1 (Bi) to 0.0149 min^-1 (Bi/SnO₂/TiO₂-G). The PCP photodegradation efficiency did not decrease significantly after 5 cycles, and the nanocomposite photocatalyst still showed a high efficiency of 68% in the last cycle. The excellent photocatalytic activity of Bi/SnO₂/TiO₂-G is ascribed as well as the heterostructure of the nanocomposite photocatalyst.

Electrospun Functional Nanofiber Membrane for Antibiotic Removal in Water: Review

As a new kind of water pollutant, antibiotics have encouraged researchers to develop new treatment technologies. Electrospun fiber membrane shows excellent benefits in antibiotic removal in water due to its advantages of large specific surface area, high porosity, good connectivity, easy surface modification and new functions. This review introduces the four aspects of electrospinning technology, namely, initial development history, working principle, influencing factors and process types. The preparation technologies of electrospun functional fiber membranes are then summarized. Finally, recent studies about antibiotic removal by electrospun functional fiber membrane are reviewed from three aspects, namely, adsorption, photocatalysis and biodegradation. Future research demand is also recommended.

Theoretical study on the adsorption and catalytic degradation mechanism of sulfacetamide on anatase TiO2(001) and (101) surfaces

In this paper, the adsorption of sulfacetamide on anatase titanium dioxide (001) and (101) was studied. The mechanism of six degradation pathways of sulfacetamide was discussed.

Unravelling the visible light-assisted catalytic prowess of an n–n type In2S3/CeO2 Z-scheme heterojunction towards organic and inorganic water pollution mitigation

The exploitation of visible light active photocatalysts for the removal of various pollutants has been given tremendous consideration in water and wastewater treatment.

Amine-functionalized metal–organic framework integrated bismuth tungstate (Bi2WO6/NH2-UiO-66) composite for the enhanced solar-driven photocatalytic degradation of ciprofloxacin molecules

The Bi2WO6/NH2-UiO-66 composite with Z-Scheme heterojunction formation offered efficient charge separation and strong redox property towards ciprofloxacin degradation under solar light irradiation.