A Facile One-Pot Synthesis of Copper Sulfide-Decorated Reduced Graphene Oxide Composites for Enhanced Detecting of H2O2 in Biological Environments

Monodispersed Molecular Phthalocyanine with Sulfur-Driven Electron Delocalization for Enhanced Electrochemical Biosensing

Heterogenizing the molecular catalysts on conductive scaffolds to achieve the isolated molecular dispersion and expected coordination structures is significant yet still challenging. Herein, a sulfur-driving strategy to anchor monodispersed cobalt phthalocyanine on nitrogen and sulfur co-doped graphene (NSG-CoPc) is demonstrated. Experimental and theoretical analysis prove that the incorporation of S dramatically improves the adsorption capability of NSG and evokes the monodispersion of the CoPc molecule, promoting the axial Co─N coordination and the electron delocalization of the Co catalytic center. Benefiting from the reduced activation energy barrier and boosted electron transfer, as well as the maximized active site utilization, NSG-CoPc exhibits outstanding H2O2 oxidization and sensing performance (used as a representative reaction). Moreover, the usage of NSG as a substrate can be readily extended to other metal (Ni, Cu, and Fe) phthalocyanine molecules with molecular-level dispersion. This work clarifies the mechanism of heteroatoms decoration and provides a new paradigm in devising monodispersed molecular catalysts with modulated chemical surroundings for broad applications.

Potential Biomedical Applications of Terbium-Based Nanoparticles (TbNPs): A Review on Recent Advancement

The scientific world is increasingly focusing on rare earth metal oxide nanomaterials due to their consequential biological prospects, navigated by breakthroughs in biomedical applications. Terbium belongs to rare earth elements (lanthanide series) and possesses remarkably strong luminescence at lower energy emission and signal transduction properties, ushering in wide applications for diagnostic measurements (i.e., bioimaging, biosensors, fluorescence imaging, etc.) in the biomedical sectors. In addition, the theranostic applications of terbium-based nanoparticles further permit the targeted delivery of drugs to the specific site of the disease. Furthermore, the antimicrobial properties of terbium nanoparticles induced via reactive oxygen species (ROS) cause oxidative damage to the cell membrane and nuclei of living organisms, ion release, and surface charge interaction, thus further creating or exhibiting excellent antioxidant characteristics. Moreover, the recent applications of terbium nanoparticles in tissue engineering, wound healing, anticancer activity, etc., due to angiogenesis, cell proliferation, promotion of growth factors, biocompatibility, cytotoxicity mitigation, and anti-inflammatory potentials, make this nanoparticle anticipate a future epoch of nanomaterials. Terbium nanoparticles stand as a game changer in the realm of biomedical research, proffering a wide array of possibilities, from revolutionary imaging techniques to advanced drug delivery systems. Their unique properties, including luminescence, magnetic characteristics, and biocompatibility, have redefined the boundaries of what can be achieved in biomedicine. This review primarily delves into various mechanisms involved in biomedical applications via terbium-based nanoparticles due to their physicochemical characteristics. This review article further explains the potential biomedical applications of terbium nanoparticles with in-depth significant mechanisms from the individual literature. This review additionally stands as the first instance to furnish a "single-platted" comprehensive acquaintance of terbium nanoparticles in shaping the future of healthcare as well as potential limitations and overcoming strategies that require exploration before being trialed in clinical settings.

Near-Infrared Fluorescence Probe for Indication of the Pathological Stages of Wound Healing Process and Its Clinical Application

Chronic wound healing is one of the most complicated biological processes in human life, which is also a serious challenge for human health. During the healing process, multiple biological pathways are activated, and various kinds of reactive oxygen species participate in this process. Hydrogen peroxide (H2O2) involves in chronic wounds and its concentration is fluctuated in different pathological stages during the wound healing process. Therefore, H2O2 may be recognized as a powerful biomarker to indicate the wound healing process. However, the pathological roles of H2O2 cannot be fully understood yet. Herein, we proposed a near-infrared fluorescent probe DCM-H2O2 for highly sensitive and rapid detection of H2O2 in living cells and scald and incision wound mice models. DCM-H2O2 exhibited a low detection limit and high specificity with low cytotoxicity for H2O2, which had great potential for its application in vivo. The probe was successfully utilized to monitor the fluctuation of endogenous H2O2 in the proliferation process of human immortalized epidermal (HACAT) cells, which confirmed that H2O2 participated in the cells' proliferation activity through a growth factor signaling pathway. In the scald and incision wound mice models, H2O2 concentration fluctuations at different pathological stages during the wound healing process could be obtained by in vivo fluorescence imaging. Finally, H2O2 concentrations in different stages of human diabetic foot tissues were also confirmed by the proposed probe. We expect that H2O2 could be a sensitive biomarker to indicate the wound healing process.

Fabrication of Yolk-Shell Structure with Multifarious Nanoparticles via Double-Layered Encapsulation Strategy

The post-encapsulation method (such as single-layered encapsulation) is a promising strategy to synthesize yolk-shell structures that protect functional nanoparticles by the molecular sieving effect. However, this method exhibited limited loading capacity and nonuniform encapsulation during the co-encapsulation of various nanoparticles owing to the insufficient surface area for nanoparticle attachment. To address these limitations, we proposed a double-layered encapsulation method comprising an increased number of silica template layers and separate attachment of multifarious nanoparticles to different layers. Compared with conventional methods, this strategy can precisely adjust the ratio of encapsulated nanoparticles and increase the loading amount, which improves the functionality of yolk-shell structures, such as the photothermal properties of gold nanoparticle-encapsulated yolk-shell structures (∼69%). We describe, for the first time, the precise control of the ratio of encapsulated nanoparticles and the loading of numerous nanoparticles. Consequently, this strategy has significant potential for various applications of yolk-shell structures.

Fluorescent sensor based on PtS2-PEG nanosheets with peroxidase-like activity for intracellular hydrogen peroxide detection and imaging

Hydrogen peroxide (H₂O₂) is produced in living organisms and is involved in a variety of redox-regulated processes. Therefore, the detection of H₂O₂ is important for tracing the molecular mechanisms of some biological events. Here, we demonstrated for the first time the peroxidase activity of PtS₂-PEG NSs under the physiological conditions. PtS₂ NSs were synthesized by mechanical exfoliation followed by functionalization with polyethylene glycol amines (PEG-NH₂) to improve their biocompatibility and physiological stability. Fluorescence was generated by catalyzing the oxidation of o-phenylenediamine (OPD) by H₂O₂ in the presence of the PtS₂ NSs. The proposed sensor had a limit of detection (LOD) of 248 nM and a detection range of 0.5-50 μM in the solution state, which was better than or comparable to previous reports in the literature. The developed sensor was further applied for the detection of H₂O₂ released from cells as well as for imaging studies. The results show that the sensor is promising for future applications in clinical analysis and pathophysiology.

In Situ Release of Ulvan from Crosslinked Ulvan/Chitosan Complex Films and Their Evaluation as Wound Dressings

When a wound forms due to any injuries, it should be covered with a functional wound dressing for accelerating wound healing and reducing infection. In this study, crosslinked ulvan/chitosan complex films were prepared with or without the addition of glycerol and chlorophyll, and their wound healing properties were evaluated for potential application in wound dressing. The results showed that the tensile strength and elongation at break of the prepared ulvan/chitosan complex films were 2.23-2.48 MPa and 83.8-108.5%, respectively. Moreover, their water vapor transmission rates (WVTRs) were in the range of 1791-2029 g/m²-day, providing suitable environment for wound healing. Particularly, these complex films could release ulvan in situ in a short time, and the film with chlorophyll added had the highest release rate, reaching 62.8% after 20 min of releasing. In vitro studies showed that they were biocompatible toward NIH 3T3 and HaCaT cells, and promoted the migration of NIH 3T3 cells. These complex films could protect HaCaT cells from oxidative damage and reduce the production of reactive oxygen species (ROS); the addition of chlorophyll also effectively reduced the inflammatory response induced by LPS as found in the reduction in both NO and IL-6. Animal models showed that the complex films added with glycerol and chlorophyll could promote wound healing in the early stage, while accelerating the regeneration of dermal glands and collagen production. Briefly, these ulvan/chitosan complex films had good physiochemical properties and biological activity, and could accelerate wound healing both in vitro and in vivo.

Potential Environmental and Health Implications from the Scaled-Up Production and Disposal of Nanomaterials Used in Biosensors

Biosensors often combine biological recognition elements with nanomaterials of varying compositions and dimensions to facilitate or enhance the operating mechanism of the device. While incorporating nanomaterials is beneficial to developing high-performance biosensors, at the stages of scale-up and disposal, it may lead to the unmanaged release of toxic nanomaterials. Here we attempt to foster connections between the domains of biosensors development and human and environmental toxicology to encourage a holistic approach to the development and scale-up of biosensors. We begin by exploring the toxicity of nanomaterials commonly used in biosensor design. From our analysis, we introduce five factors with a role in nanotoxicity that should be considered at the biosensor development stages to better manage toxicity. Finally, we contextualize the discussion by presenting the relevant stages and routes of exposure in the biosensor life cycle. Our review found little consensus on how the factors presented govern nanomaterial toxicity, especially in composite and alloyed nanomaterials. To bridge the current gap in understanding and mitigate the risks of uncontrolled nanomaterial release, we advocate for greater collaboration through a precautionary One Health approach to future development and a movement towards a circular approach to biosensor use and disposal.

A Core–Shell Au@TiO2 and Multi-Walled Carbon Nanotube-Based Sensor for the Electroanalytical Determination of H2O2 in Human Blood Serum and Saliva

A hydrogen peroxide (H₂O₂) sensor was developed based on core–shell gold@titanium dioxide nanoparticles and multi-walled carbon nanotubes modified glassy carbon electrode (Au@TiO₂/MWCNTs/GCE). Core–shell Au@TiO₂ material was prepared and characterized using a scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, X-ray diffraction (XRD) and Zeta-potential analyzer. The proposed sensor (Au@TiO₂/MWCNTs/GCE) was investigated electrochemically using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The analytical performance of the sensor was evaluated towards H₂O₂ using differential pulse voltammetry (DPV). The proposed sensor exhibited excellent stability and sensitivity with a linear concentration range from 5 to 200 µM (R² = 0.9973) and 200 to 6000 µM (R² = 0.9994), and a limit of detection (LOD) of 1.4 µM achieved under physiological pH conditions. The practicality of the proposed sensor was further tested by measuring H₂O₂ in human serum and saliva samples. The observed response and recovery results demonstrate its potential for real-world H₂O₂ monitoring. Additionally, the proposed sensor and detection strategy can offer potential prospects in electrochemical sensors development, indicative oxidative stress monitoring, clinical diagnostics, general cancer biomarker measurements, paper bleaching, etc.

Etching process enhanced H2O2 sensing performance of SnO2/Zn2SnO4 with reliable anti-humidity ability

In this work, sol-gel and chemical etching methods are adopted to synthesize zinc hydroxystannate materials. Cubic tin dioxide and zinc stannate composite materials with a definite structure are successfully prepared at varied annealing temperatures and times by using the synthesized zinc hydroxystannate as a sacrificial template. After a gas sensing test, tin dioxide and zinc stannate composite samples etched at 650 °C and annealed for 4 h exhibit a strong response and outstanding selectivity to hydrogen peroxide. Furthermore, the samples prepared under such conditions demonstrate long-term stability, and also a specified level of tolerance after the humidity stability test. Moreover, because of the simple preparation method and rapid detection of hydrogen peroxide, it is worth noting that samples prepared following the etching process at the 650 °C annealing temperature for 4 h exhibit the significant benefits of tin dioxide and zinc stannate composites. In this modern era, this research emphasizes the sample's potential for the rapid identification and detection of hydrogen peroxide.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Nitrogenated Graphene Oxide-Decorated Metal Sulfides for Better Antifouling and Dye Removal

Nitrogenated graphene oxide-decorated copper sulfide nanocomposites (Cu _x S-NrGO, where x = 1 and 2) are designed to be incorporated in polysulfone (PSF) membranes for effective fouling resistance of PSF membranes and their dye removal capacity. The developed membranes possess more hydrophilicity and an enhancement in pure water flux (PWF). Also, the highest bovine serum albumin (BSA) rejection of 89% was observed when compared to membranes with pristine PSF (5 L/m² h PWF and 88% BSA rejection) and CuS-incorporated PSF membranes (14 L/m² h PWF and 83% BSA rejection) because of N doping and enhanced permeability. It is also found that the Cu _x S-NrGO-incorporated PSF membranes exhibited a significantly higher fouling resistance, a larger permeate flux recovery ratio (FRR) of nearly 82%, and a congo red dye rejection of 93%. Cu _x S-NrGO nanoparticles thus demonstrate the potential efficacy of enhancing the hydrophilicity, leading to a better flux, dye removal capacity, and antifouling capacity with a very high FRR value of 82% because of a strong interaction between the N-active sites of the NrGO, Cu _x S, and polysulfone matrix, and negligible leaching of nanoparticles is observed.

Wearable Electrochemical Sensors in Parkinson's Disease

Parkinson’s disease (PD) is a neurodegenerative disorder associated with widespread aggregation of α-synuclein and dopaminergic neuronal loss in the substantia nigra pars compacta. As a result, striatal dopaminergic denervation leads to functional changes in the cortico-basal-ganglia-thalamo-cortical loop, which in turn cause most of the parkinsonian signs and symptoms. Despite tremendous advances in the field in the last two decades, the overall management (i.e., diagnosis and follow-up) of patients with PD remains largely based on clinical procedures. Accordingly, a relevant advance in the field would require the development of innovative biomarkers for PD. Recently, the development of miniaturized electrochemical sensors has opened new opportunities in the clinical management of PD thanks to wearable devices able to detect specific biological molecules from various body fluids. We here first summarize the main wearable electrochemical technologies currently available and their possible use as medical devices. Then, we critically discuss the possible strengths and weaknesses of wearable electrochemical devices in the management of chronic diseases including PD. Finally, we speculate about possible future applications of wearable electrochemical sensors in PD, such as the attractive opportunity for personalized closed-loop therapeutic approaches.

Technological advances in electrochemical biosensors for the detection of disease biomarkers

With an increasing focus on health in contemporary society, interest in the diagnosis, treatment, and prevention of diseases has grown rapidly. Accordingly, the demand for biosensors for the early diagnosis of disease is increasing. However, the measurement range of existing electrochemical sensors is relatively high, which is not suitable for early disease diagnosis, requiring the detection of small amounts of biocomponents. Various attempts have been made to overcome this and amplify the signal, including binding with various labeling molecules, such as DNA, enzymes, nanoparticles, and carbon materials. Efforts are also being made to increase the sensitivity of electrochemical sensors, and the combination of nanomaterials, materials, and biotechnology offers the potential to increase sensitivity in a variety of ways. Recent studies suggest that electrochemical sensors can be a powerful tool in providing comprehensive insights into the targeting and detection of disease-associated biomarkers. Significant advances in nanomaterial and biomolecule approaches for improved sensitivity have resulted in the development of electrochemical biosensors capable of detecting multiple biomarkers in real time in clinically relevant samples. In this review, we have discussed the recent studies on electrochemical sensors for detection of diseases such as diabetes, degenerative diseases, and cancer. Further, we have highlighted new technologies to improve sensitivity using various materials, including DNA, enzymes, nanoparticles, and carbon materials.

Study of the Lithium Storage Mechanism of N-Doped Carbon-Modified Cu2 S Electrodes for Lithium-Ion Batteries

Owing to their high specific capacity and abundant reserve, Cu_xS compounds are promising electrode materials for lithium‐ion batteries (LIBs). Carbon compositing could stabilize the Cu_xS structure and repress capacity fading during the electrochemical cycling, but the corresponding Li⁺ storage mechanism and stabilization effect should be further clarified. In this study, nanoscale Cu₂S was synthesized by CuS co‐precipitation and thermal reduction with polyelectrolytes. High‐temperature synchrotron radiation diffraction was used to monitor the thermal reduction process. During the first cycle, the conversion mechanism upon lithium storage in the Cu₂S/carbon was elucidated by operando synchrotron radiation diffraction and in situ X‐ray absorption spectroscopy. The N‐doped carbon‐composited Cu₂S (Cu₂S/C) exhibits an initial discharge capacity of 425 mAh g⁻¹ at 0.1 A g⁻¹, with a higher, long‐term capacity of 523 mAh g⁻¹ at 0.1 A g⁻¹ after 200 cycles; in contrast, the bare CuS electrode exhibits 123 mAh g⁻¹ after 200 cycles. Multiple‐scan cyclic voltammetry proves that extra Li⁺ storage can mainly be ascribed to the contribution of the capacitive storage.

Structural Engineering of Hollow Microflower-like CuS@C Hybrids as Versatile Electrochemical Sensing Platform for Highly Sensitive Hydrogen Peroxide and Hydrazine Detection

Designing metal sulfides with unique configurations and exploring their electrochemical activities for hydrogen peroxide (H₂O₂) and hydrazine (N₂H₄) is challenging and desirable for various fields. Herein, hollow microflower-like CuS@C hybrids were successfully assembled and further exploited as a versatile electrochemical sensing platform for H₂O₂ reduction and N₂H₄ oxidation, of which the elaborate strategies make the perfect formation of hollow architecture, providing considerable electrocatalytic sites and fast charge transfer rate, while the appropriate introduction polydopamine-derived carbon skeleton facilitates the electronic conductivity and boosts structural robustness, thus generating wide linear range (0.05-14 and 0.01-10 mM), low detection limit (0.22 μM and 0.07 μM), and a rather low overpotential (-0.15 and -0.05 V) toward H₂O₂ and N₂H₄, as well as good selectivity, excellent reproducibility, and admirable long-term stability. It should be highlighted that the operating potentials can compare favorably with those of some reported H₂O₂ and N₂H₄ sensors based on noble metals. In addition, good recoveries and acceptable relative standard deviations (RSDs) attained in serum and water samples fully verify the accuracy and anti-interference capability of our proposed sensor systems. These results not only elucidate an effective structural nanoengineering strategy for electroanalytical science but also advance the rational utilization of H₂O₂ and N₂H₄ in practicability.

High-selective room-temperature NO2 sensors based on a coumarin-substituted tris(phthalocyaninato) europium

A novel coumarin-substituted phthalocyaninato triple-decker complex, Eu2[Pc(Cou)4]3 is designed and synthesized successfully. Introduction of the coumarin substituents onto the periphery of a phthalocyanine ring in the sandwich-type phthalocyaninato triple-decker not only increased the solubility and improved the film-forming ability, but also importantly ensured the suitable HOMO and LUMO energy levels. The solution-processed thin film of the Eu2[Pc(Cou)4]3 was prepared by a simple and low-cost quasi–Langmuir–Shäfer (QLS) method and applied as the gas sensor for the detection of NO2. Importantly, within the dynamic exposure period of 1 min, balanced, stable, a reproducible [Formula: see text]-type response to electron-accepting gas NO2 in the range of 4–35 ppm, was revealed, based on the QLS film of Eu2[Pc(Cou)4]3 complex at room temperature, dependant on the optimized molecular packing in [Formula: see text]-aggregation mode with a large specific surface area and good film conductivity.

Iron-Imprinted Single-Atomic Site Catalyst-Based Nanoprobe for Detection of Hydrogen Peroxide in Living Cells

Fe-based single-atomic site catalysts (SASCs), with the natural metalloproteases-like active site structure, have attracted widespread attention in biocatalysis and biosensing. Precisely, controlling the isolated single-atom Fe-N-C active site structure is crucial to improve the SASCs' performance. In this work, we use a facile ion-imprinting method (IIM) to synthesize isolated Fe-N-C single-atomic site catalysts (IIM-Fe-SASC). With this method, the ion-imprinting process can precisely control ion at the atomic level and form numerous well-defined single-atomic Fe-N-C sites. The IIM-Fe-SASC shows better peroxidase-like activities than that of non-imprinted references. Due to its excellent properties, IIM-Fe-SASC is an ideal nanoprobe used in the colorimetric biosensing of hydrogen peroxide (H₂O₂). Using IIM-Fe-SASC as the nanoprobe, in situ detection of H₂O₂ generated from MDA-MB-231 cells has been successfully demonstrated with satisfactory sensitivity and specificity. This work opens a novel and easy route in designing advanced SASC and provides a sensitive tool for intracellular H₂O₂ detection.

Singlet-oxygen generated by a metal-organic framework for electrochemical biosensing

Enzyme-based electrochemical biosensors have been widely employed for analyte detection for several years. However, for wide application, there are many challenges to overcome, such as the sensitivity of the catalytic activity, and the reproducibility and stability of enzymes. In this work, an enzyme-free sensing strategy based on two-dimensional (2D) metal-organic frameworks (MOFs) as photosensitizers and singlet-oxygen (1O2) as the oxidant has been designed via photocatalysis and electrochemical analysis. To be specific, MOF sheets (Zn-ZnMOF) were prepared with Zn as the node and zinc(ii)tetraphenylporphyrin (TCPP(Zn)) as the ligand, which could generate 1O2 from air under light illumination, and sequentially the generated 1O2 could oxidize analytes to form their oxidation state which could be detected and reduced on the electrode, completing a redox cycle and amplifying electrochemical signals. Thanks to the morphology and superior quantum yield of 1O2 of the Zn-ZnMOF, this method could overcome the limitation of enzymes and afford selective detection, such as of hydroquinone with a detection limit of 0.8 μM in 0.1 M PBS (pH = 7.4). Furthermore, the method does not require additional reactive reagents but only with air and on/off light switching. Thirdly, the method detects the target without washing and enzyme-labelled. With these merits, this work provides a new platform for MOFs as photosensitizers for electrochemical sensors and further development of sensitive, selective, and stable electroanalytical devices for bio-application.

Catalytic amplification based on hierarchical heterogeneity bimetal-organic nanostructures with peroxidase-like activity

In this paper, integrating heterometallic units and nanostructures into metal-organic frameworks (MOFs) were applied to improve the sensitivity of detecting hydrogen peroxide (H₂O₂) in neutral solution. The bimetal-MOFs (CuCo-BDC) and GO composite (CuCo-BDC/GO) were first synthesized via an ordinary one-step solvothermal synthesis. The CuCo-BDC/GO with admirable peroxidase-like catalytic activity could be applied to detect H₂O₂. The results have low detection limit of 69 nM (S/N = 3) and a wide linear detection range, from 100 nM to 3.5 mM. This is superior to recently published biosensors based on noble metal nanomaterials, which confirms CuCo-BDC/GO as the MOF electrocatalysts with high performance. The remarkable electroanalytical performance of CuCo-BDC/GO is due to the presence of numerous open metal active sites, the synergistic effect of Cu²⁺ and Co²⁺, hierarchical structure with high-specific surface areas and the marvelous electrochemical properties of GO. Therefore, CuCo-BDC/GO is a powerful candidate for detecting H₂O₂ in electrochemical biosensing fields. Moreover, H₂O₂ detection in real samples can be done with the CuCo-BDC/GO, including human serum samples. Therefore, the novel CuCo-BDC/GO is a promising catalyst that can be applied in biotechnological and environmental applications.

Cuprous or cupric? How substrate polarity can select for different phases of copper sulfide films in chemical bath deposition

Copper sulfides have many applications from thermoelectrics to biotechnology. While the properties of different copper sulfide phases are well understood, controlling the deposited copper sulfide stoichiometry remains a significant challenge, especially in solution-phase synthesis techniques. In this work, we investigate the chemical bath deposition of Cu_xS on functionalized self-assembled monolayers (SAMs). Time-of-flight mass spectrometry, Raman spectroscopy, and x-ray photoelectron spectroscopy are employed to analyze the deposited films. We show that the use of thiourea as a sulfur source leads to the deposition of different copper sulfide phases and is controlled by the interaction of sulfur-containing ions in solution with the functionalized SAMs. For -COOH terminated SAMs, copper sulfide deposition is controlled by the surface polarity of the substrate. At the bath pH used in these experiments, the -COOH terminal groups are deprotonated. The resulting -COO^- terminated SAM surface repels negatively charged sulfur-containing ions, leading to the deposition of Cu₂S. For -CH₃ terminated SAMs, which are non-polar, there is no specific interaction between the SAM terminal group and sulfur-containing ions and CuS is deposited. For -OH terminated SAMs, which have a polar terminal group, there are two competing effects: the repulsion of S-containing ions by the small negative charge of the terminal -OH group and the increase in the concentration of sulfur-containing ions in solution as the bath pH increases. This competition leads to the deposit stoichiometry changing from Cu₂S at pH 9 to CuS at pH 12.

Cobalt and nitrogen co-doped mesoporous carbon for electrochemical hydrogen peroxide sensing: the effect of graphitization

In this study, a facile strategy for the scalable synthesis of cobalt and nitrogen co-doped mesoporous carbon (Co-N/C) is reported. Structural characterization demonstrated that Co and N were successfully co-doped in the highly porous carbon. Graphitization of porous carbon was achieved by the introduction of cobalt species. The degree of graphitization of Co-N/C could be further promoted by increasing the calcination temperature. By taking advantage of the excellent mass and electron transfer kinetics attributed to the high specific surface area, high porosity and high graphitization, the obtained Co-N/C exhibited good electrochemical activity towards H₂O₂ reduction and excellent sensing performance for the electrochemical detection of H₂O₂. The Co-N/C-950 catalyst obtained at 950 °C showed good electrochemical sensing performance with a detection limit of 2 μM and a wide linear response over the concentration range from 0.03 mM to 13 mM. Meanwhile, Co-N/C exhibited high selectivity toward the detection of H₂O₂ in the presence of possible interferences during the applications such as NaCl, glucose, ascorbic acid and so on. The results confirm that Co-N/C could be used as an efficient electrocatalyst to fabricate electrochemical sensing devices.

Recent advances in nanomaterials for therapy and diagnosis for atherosclerosis

Atherosclerosis is a chronic inflammatory disease driven by lipid accumulation in arteries, leading to narrowing and thrombosis. It affects the heart, brain, and peripheral vessels and is the leading cause of mortality in the United States. Researchers have strived to design nanomaterials of various functions, ranging from non-invasive imaging contrast agents, targeted therapeutic delivery systems to multifunctional nanoagents able to target, diagnose, and treat atherosclerosis. Therefore, this review aims to summarize recent progress (2017-now) in the development of nanomaterials and their applications to improve atherosclerosis diagnosis and therapy during the preclinical and clinical stages of the disease.

Photothermal effect and cytotoxicity of CuS nanoflowers deposited over folic acid conjugated nanographene oxide

Herein, we present the rational synthesis of a multimode photothermal agent, NGO-FA-CuS, for the advancement of photothermal therapy of cancer. The hierarchical architecture created in NGO-FA-CuS was attained by the covalent conjugation of folic acid (FA) to nanographene oxide (NGO) through amide bonding, followed by the hydrothermal deposition of CuS nanoflowers. In this approach, instead of mere mixing or deposition, FA was covalently bonded to NGO, which helped in retaining their intrinsic properties after binding and allowed to access them in the resulting hybrid nanostructure. In this specifically designed photothermal agent, NGO-FA-CuS, each component has an explicit task, i.e., NGO, FA and CuS act as the quencher, cancer cell-targeting moiety and photothermal transduction agent, respectively. Prior to the grafting of FA molecules and the deposition of CuS nanoflowers, sulfonic acid groups were introduced into NGO to provide stability under physiological conditions. Under irradiation using a 980 nm laser, NGO-FA-CuS was able to attain a temperature of 63.1 °C within 5 min, which is far beyond the survival temperature for cancer cells. Therefore, the resulting temperature recorded for NGO-FA-CuS was sufficient to induce hyperthermia in cancer cells to cause their death. When coming into contact with cancer cells, NGO-FA-CuS can cause a rapid increase in the temperature of their nucleus, destroy the genetic substances, and ultimately lead to exhaustive apoptosis under illumination using a near-infrared (NIR) laser. An excellent photothermal efficiency of 46.2% under illumination using a 980 nm laser and outstanding cytotoxicity against HeLa, SKOV3 and KB cells were attained with NGO-FA-CuS. Moreover, NGO-FA-CuS displays exceptional persistent photo-stability without photo-corrosiveness. The photothermal effect of NGO-FA-CuS was found to be dependent on its concentration and the power density of the laser source. It was found that its cytotoxicity toward cancer cells was enhanced with an increase in the concentration of NGO-FA-CuS and the incubation period.

Low-intensity focused ultrasound-augmented Cascade chemodynamic therapy via boosting ROS generation

Fenton reaction-mediated chemodynamic therapy (CDT), which destroys tumor cells by converting H₂O₂ into cytotoxic hydroxyl radical (OH) and singlet oxygen (¹O₂) species, is a promising field. However, Fenton-based CDT is severely impaired by the inappropriate tumor environment associated with undesirable intratumoral acidity and insufficient H₂O₂ supply in tumor microenvironment (TME). Therefore, a strategy that can address these concerns is highly desired and beneficial for boosting such treatment. Herein, a magnetic nanoreactor system (denoted as poly (lactic-co-glycolic acid) (PLGA)-superparamagnetic iron oxide (SPIO)&vitamin C (Vc) was constructed with Vc in the core, SPIO on the shell, and PLGA as the building carrier. Upon low-intensity focused ultrasound irradiation, on-demand Vc release can locally decompose into H₂O₂, which can generate a favorable condition for facilitating SPIO-based Fenton-like reaction and result in continuous O₂ and OH/¹O₂ generation. The TME modulation-augmented CDT by this nanoreactor based on the reinforced Fenton reaction tremendously improved the antitumor outcomes, especially under increased accumulation contributed by magnetic targeting combined with enhanced permeability and retention effect. Moreover, the explosive production of oxygen can be monitored by real-time photoacoustic imaging, offering a noninvasive means to forecast the treatment efficacy. Therefore, this established microenvironment modulation strategy for augmenting Fenton reaction-based CDT paves a new avenue to realize highly efficient cancer theranostics.

Synthesis of a CuNP/chitosan/black phosphorus nanocomposite for non-enzymatic hydrogen peroxide sensing

A copper-chitosan-black phosphorus nanocomposite (CuNPs-Chit-BP) was fabricated by electrochemically depositing copper nanoparticles onto a black phosphorus-modified glassy carbon electrode in chitosan solution. CuNPs demonstrated a uniform distribution on the Chit-BP modified GCE with an average size of 20 nm. Electrochemical methods were used to study the catalytic activity of the CuNPs-Chit-BP nanocomposite toward hydrogen peroxide. The results showed that the synthesized nanocomposite exhibited excellent electrical conductivity, good biocompatibility and highly efficient electrocatalytic activity toward hydrogen peroxide reduction in the range of 10 μM-10.3 mM with a detection limit of 0.390 μM. The present work proposed a new strategy to explore novel BP-based non-enzymatic biosensing platforms.

Cu2O-mediated assembly of electrodeposition of Au nanoparticles onto 2D metal-organic framework nanosheets for real-time monitoring of hydrogen peroxide released from living cells

The development of metal nanoparticles (MNP) combined with a metal-organic framework (MOF) has received more and more attention due to its excellent synergistic catalytic ability, which can effectively broaden the scope of catalytic reactions and enhance the catalytic ability. In this work, we developed a novel ternary nanocomposite named Cu₂O-mediated Au nanoparticle (Au NP) grown on MIL-53(Fe) for real-time monitoring of hydrogen peroxide (H₂O₂) released from living cells. First, Cu₂O-MIL-53(Fe) was prepared by redox assembly technology, which provided the growth template, and active sites for AuCl^4-. Au@Cu₂O-MIL-53(Fe)/GCE biosensor was prepared by further loading nano-Au uniformly on the surface of Cu₂O by electrochemical deposition. Compared to individual components, the hybrid nanocomposite showed superior electrochemical properties as electrode materials due to the synergistic effect between AuNPs, Cu₂O, and MIL-53(Fe). Electrochemical measurement showed that the Au@Cu₂O-MIL-53(Fe)/GCE biosensor presented a satisfactory catalytic activity towards H₂O₂ with a low detection limit of 1.01 μM and sensitivity of 351.57 μA mM^-1 cm^-2 in the linear range of 10-1520 μM. Furthermore, this biosensor was successfully used for the real-time monitoring of dynamic H₂O₂ activated by PMA released from living cells. And the great results of confocal fluorescence microscopy of the co-culture cells with PMA and Au@Cu₂O-MIL-53(Fe) verified the reliability of the biosensor, suggesting its potential application to the monitoring of critical pathological processes at the cellular level.

Design of Stretchable Holey Gold Biosensing Electrode for Real-Time Cell Monitoring

In bioelectronics, gold thin films have been widely used as sensing electrodes for probing biological events due to their high conductivity, chemical inertness, biocompatibility, wide electrochemical window, and facile surface modification. However, they are intrinsically not stretchable, which limits their applications in detecting biological reactions when a soft biological system is mechanically deformed. Here, we report on a nanosphere lithography-based strategy to generate ordered microhole gold thin-film electrodes supported by elastomeric substrates. Both experimental and theoretical studies show that the presence of microholes substantially suppresses the catastrophic crack propagation-the main reason for electrical failure for a continuous gold film. As a result, the holey gold film achieves a ∼94% stretchable limit, after which the conductivity is lost, in contrast to ∼4% for the nonstructured counterpart. Furthermore, the pinhole gold electrode is successfully used to monitor the H₂O₂ released from living cells under dynamic stretching conditions.

Co-Cr mixed spinel oxide nanodots anchored on nitrogen-doped carbon nanotubes as catalytic electrode for hydrogen peroxide sensing

Hydrogen peroxide (H₂O₂) is a significant biomarker in physiological processes. Abnormal levels of H₂O₂ are considered to be closely related to some acute diseases. Therefore, it is important to monitor the H₂O₂ levels in bio-samples. Herein, we present a novel non-enzymatic electrochemical H₂O₂ sensor based on the excellent electrocatalytic performance of a composite comprising Zn-Cr-Co ternary spinel metal oxide nanodots (ZnCrCoO₄) anchored on the surface of nitrogen-doped carbon nanotubes (NCNTs), denoted as ZnCrCoO₄/NCNTs, toward H₂O₂ reduction. ZnCrCoO₄/NCNTs were synthesized using a facile one-pot hydrothermal strategy. The enhanced electrocatalytic performance of ZnCrCoO₄ is resulted from the partial substitution of Co in spinel zinc cobaltate (ZnCo₂O₄) with Cr, which modifies the CoO electronic structure and enhances electroconductivity. The ZnCrCoO₄/NCNTs-based H₂O₂ sensor exhibited a wide quantitative detection range from 1 to 7330 μM with a detection limit of 1 μM. The sensor showed excellent reproducibility and selectivity for H₂O₂ sensing. In addition, remarkable recoveries were obtained for H₂O₂-spiked fish serum samples. These results demonstrated that the as-developed sensor has a great potential in monitoring H₂O₂ levels in practical applications.

Engineering Inorganic Nanoflares with Elaborate Enzymatic Specificity and Efficiency for Versatile Biofilm Eradication

Nanozyme has emerged as a versatile nanocatalyst yet is constrained with limited catalytic efficiency and specificity for various biomedical applications. Herein, by elaborately integrating the recognition/transduction carbon dots (CDs) with platinum nanoparticles (PtNPs), an exquisite CDs@PtNPs (CPP) nanoflare is engineered as an efficient and substrate-specific peroxidase-mimicking nanozyme for high-performance biosensing and antibacterial applications. The intelligent CPP-catalyzed hydrogen peroxide (H₂ O₂ )-generated reactive oxygen species realize the sensitive diagnosis-guided enhanced disinfection of pathogens. Significantly, the CPP nanozyme shows the prominent biofilm eradication and wound healing in vivo by virtue of endogenous H₂ O₂ in acidic infection tissues, which can substantially preclude the annoying antibiotics resistance. A fundamental understanding on the present CPP nanoflare would not only facilitate the advancement of various prospective biocatalysts, but also establish a multifunctional means for versatile biosensing and smart diagnostic applications.

Electrochemical Biosensors Based on Nanomaterials for Early Detection of Alzheimer's Disease

Alzheimer's disease (AD) is an untreatable neurodegenerative disease that initially manifests as difficulty to remember recent events and gradually progresses to cognitive impairment. The incidence of AD is growing yearly as life expectancy increases, thus early detection is essential to ensure a better quality of life for diagnosed patients. To reach that purpose, electrochemical biosensing has emerged as a cost-effective alternative to traditional diagnostic techniques, due to its high sensitivity and selectivity. Of special relevance is the incorporation of nanomaterials in biosensors, as they contribute to enhance electron transfer while promoting the immobilization of biological recognition elements. Moreover, nanomaterials have also been employed as labels, due to their unique electroactive and electrocatalytic properties. The aim of this review is to add value in the advances achieved in the detection of AD biomarkers, the strategies followed for the incorporation of nanomaterials and its effect in biosensors performance.

2D materials in electrochemical sensors for in vitro or in vivo use

Individual cells and cell populations are at the present time investigated with a myriad of analytical tools. While most of them are commercially available, some of these analytical tools are just emerging from research laboratories and are in the developmental phase. Electrochemical sensors which allow the monitoring of low molecular weight compounds released (and / or uptaken) by cells are among these emerging tools. Such sensors are increasingly built using 2D materials (e.g. graphene-based materials, transition metal dichalcogenides, etc.) with the aim of conferring better analytical performances to these devices. The present work critically reviews studies published during the last 10 years describing electrochemical sensors made with 2D materials and exploited to monitor small compounds (e.g. H₂O₂, ·NO, glucose, etc.) in living biological systems. It also discusses the very few 2D material-based electrochemical sensors which are wearable or usable in vivo. Finally, the present work includes a specific section about 2D material biocompatibility, a fundamental requirement for 2D material-based sensor applications in vitro and in vivo. As such, the review provides a critical view on the state of the art of electrochemical sensors made with 2D materials and used at cellular level and it evaluates the possibility that such sensors will be used on / in the human body on a wider scale.

Recent Advances in Metal Decorated Nanomaterials and Their Various Biological Applications: A Review

Nanoparticles (nanoparticles) have received much attention in biological application because of their unique physicochemical properties. The metal- and metal oxide-supported nanomaterials have shown significant therapeutic effect in medical science. The mechanisms related to the interaction of nanoparticles with animal and plant cells can be used to establish its significant role and to improve their activity in health and medical applications. Various attempts have been made to discuss the antibiotic resistance and antimicrobial activity of metal-supported nanoparticles. Despite all these developments, there is still a need to investigate their performance to overcome modern challenges. In this regard, the present review examines the role of various types of metal-supported nanomaterials in different areas such as antibacterial, antifungal, anticancer, and so on. Based on the significant ongoing research and applications, it is expected that metal-supported nanomaterials play an outstanding role not only in medical but also in other important areas.

Amperometric determination of Myo-inositol using a glassy carbon electrode modified with nanostructured copper sulfide

A method for the amperometric determination of Myo-inositol is presented. Nanostructured copper sulfide material was synthesized by solvothermal method and utilized as sensor matrix. The physico-chemical analysis using XRD, Raman, FE-SEM, TEM, and XPS confirmed the formation of CuS material. The voltammetric response of CuS-modified glassy carbon electrode for a successive Myo-inositol (0.5 μM) addition confirmed that the reaction takes place at the surface of the electrode. The modified electrode resulted in signal enhancement for a linear response ranging from 0.5-8.5 μM at an applied overpotential of 0.65 V with a correlation coefficient value (R²) of 0.99. The sensitivity and limit of detection of the modified electrode were 7.87 μA μM^-1 cm^-2 and 0.24 μM, respectively. The interfering effect of various compounds present in real samples was examined. Graphical abstract Schematic representation of synthetic protocol of nanostructured CuS and Myo-inositol oxidation on CuS-modified glassy carbon electrode in basic medium.

Expanded mesoporous silica-encapsulated ultrasmall Pt nanoclusters as artificial enzymes for tracking hydrogen peroxide secretion from live cells

Design of synthetic structures that possess the similar functions to natural enzymes held great promise in environmental detection and biomedical application. Herein, a new concept for the fabrication of solid-supported catalysts as peroxidase mimic have been proposed to realize high-catalytic activity and stability by utilizing expanded mesoporous silica (EMSN)-encapsulated Pt nanoclusters. Compared with PtNCs, the introduction of amino group modified EMSN would enrich H₂O₂ on the surface of PtNCs and increase the catalytic sites for H₂O₂ decomposition, which gave rise to the higher catalytic activity of EMSN-PtNCs over a broad pH range, especially in weakly acidic and neural solutions. This would facilitate their applications for real-time monitoring the secretion of H₂O₂ from living cancer cells stimulated by various anticancer drugs. Our findings not only pave the way to use porous matrix as the structural component for the design of the biomimetic catalysts, but also provide a simple and reliable platform to monitor H₂O₂ released from living cells in real time, which holds great potential for elucidating the biological roles of H₂O₂ and underlying molecular mechanisms of drug cytotoxicity as well as drug therapeutic effects.

Chemical Bath Deposition of Copper Sulfide on Functionalized SAMs: An Unusual Selectivity Mechanism

We have investigated the chemical bath deposition (CBD) of CuS using thioacetamide on functionalized self-assembled monolayers (SAMs) using scanning electron and optical microscopies, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry. For all SAMs studied, the amount of CuS deposited is strongly dependent on the bath pH and can be attributed to the interaction of the SAM terminal groups with the chalcogenide ions present in solution. For -CH₃-terminated SAMs, there is a steady increase in the amount of CuS deposited with an increase in the bath pH because there is an increase in the concentration of chalcogenide ion. However, for -OH- and -COOH-terminated SAMs, we observe that the maximum amount of CuS is deposited at pH 10. We attribute this behavior to a competition between the repulsion of the chalcogenide ions by the negatively charged SAM terminal groups and an increase in the chalcogenide ion concentration with an increase in the bath pH. Using the interaction of the chalcogenide ions with the different SAM terminal functional groups, we demonstrate that CuS can be selectively deposited on the -CH₃-terminated areas of patterned -OH/-CH₃- and -COOH/-CH₃-terminated SAMs.

New Reusable Solid Biosensor with Covalent Immobilization of the Horseradish Peroxidase Enzyme: In Situ Liberation Studies of Hydrogen Peroxide by Portable Chemiluminescent Determination

Herein, we reported a chemiluminescent biosensor based on the covalent immobilization of the horseradish peroxidase (HRP) enzyme on a polydimethylsiloxane (PDMS) support to quantify in situ hydrogen peroxide (H₂O₂). The chemiluminescent reaction based on the use of luminol as an oxidizable substrate, with HRP as the catalyst, has been used in order to quantify H₂O₂ as the oxidizing agent. The performance of the proposed biosensor has been demonstrated to determine H₂O₂ liberated by cells in a culture medium and for evaluating the delivery of H₂O₂ from denture cleaner tablets, as examples of application. For both analyses, the results indicated that the biosensor is cost-effective, sensitive, and selective with a detection limit of 0.02 μM and good linearity over the range 0.06-10 μM. Precision was also satisfactory (relative standard deviation, % RSD < 6). The strength of this biosensing system is the simplicity, portability, and reusability of the devices; it can be applied up to 60 times with 90% of its activity maintained.

Superior trichloroethylene removal from water by sulfide-modified nanoscale zero-valent iron/graphene aerogel composite

Sulfide-modified nanoscale zero-valent iron (S-nZVI) is a promising material for removal of organic pollutants from water, but S-nZVI nanoparticles (NPs) easily agglomerate and have poor contact with organic contaminants. Herein, we propose a new S-nZVI/graphene aerogel (S-nZVI/GA) composite which exhibits superior removal capability for trichloroethylene (TCE) from water. Three-dimensional porous graphene aerogel (GA) can improve the efficiency of electron transport, enhance the adsorption of organic pollutants and restrain the agglomeration of the core-shell S-nZVI NPs. The TCE removal rates of FeS, nZVI, GA and S-nZVI were 27.8%, 42%, 63% and 75% in 2 hr, respectively. Furthermore, TCE was completely removed within 50 min by S-nZVI/GA. The TCE removal rate increased with increasing pH and temperature, and TCE removal followed the pseudo-first-order kinetic model. The results demonstrate the great potential of S-nZVI/GA composite as a low-cost, easily separated and superior monolithic adsorbent for removal of organic pollutants.