Stabilization of Silver and Gold Nanoparticles: Preservation and Improvement of Plasmonic Functionalities

Atomically precise surface chemistry of zirconium and hafnium metal oxo clusters beyond carboxylate ligands

The effectiveness of nanocrystals in many applications depends on their surface chemistry. Here, we leverage the atomically precise nature of zirconium and hafnium oxo clusters to gain fundamental insight into the thermodynamics of ligand binding. Through a combination of theoretical calculations and experimental spectroscopic techniques, we determine the interaction between the M6O8 8+ (M = Zr, Hf) cluster surface and various ligands: carboxylates, phosphonates, dialkylphosphinates, and monosubstituted phosphinates. We refute the common assumption that the adsorption energy of an adsorbate remains unaffected by the surrounding adsorbates. For example, dialkylphosphinic acids are too sterically hindered to yield complete ligand exchange, even though a single dialkylphosphinate has a high binding affinity. Monoalkyl or monoaryl phosphinic acids do replace carboxylates quantitatively and we obtained the crystal structure of M6O8H4(O2P(H)Ph)12 (M = Zr, Hf), giving insight into the binding mode of monosubstituted phosphinates. Phosphonic acids cause a partial structural reorganization of the metal oxo cluster into amorphous metal phosphonate as indicated by pair distribution function analysis. These results rationalize the absence of phosphonate-capped M6O8 clusters and the challenge in preparing Zr phosphonate metal-organic frameworks. We thus further reinforce the notion that monoalkylphosphinates are carboxylate mimics with superior binding affinity.

Enhanced antibacterial efficacy: rapid analysis of silver-decorated azithromycin-infused Soluplus® nanoparticles against E. coli and S. epidermidis biofilms

The escalating threat of antibiotic-resistant bacterial biofilms necessitates innovative antimicrobial strategies. This study introduces silver-decorated azithromycin-infused Soluplus® nanoparticles (Ag-AZI-Sol NPs) synthesized via a controlled emulsion diffusion method to ensure sustained release of antimicrobial silver ions for over six hours-a critical factor for continuous antibacterial efficacy. The efficacy of these nanoparticles was evaluated against biofilms formed by Escherichia coli (E. coli) and Staphylococcus epidermidis (S. epidermidis), pathogens that cause hospital-acquired infections. Concentrations of 5 and 10 μg mL-1 of Ag-AZI-Sol NPs induced significant morphological changes within the biofilms, disrupting the bacterial extracellular matrix as observed using scanning electron microscopy (SEM). This disruption peaked between two and six hours, coinciding with damage to bacterial cells by the silver ions. Antibacterial assay measurements confirmed a significant reduction in the growth rate among the Ag-AZI-Sol NP-treated bacteria compared with controls. Electrochemical analysis using laser-induced graphene (LIG) and chronoamperometry revealed a decline in current, indicating an effective antibacterial effect. This innovative biosensing technique makes use of the high conductivity and surface area of LIG to detect changes in bacterial activity quickly and sensitively. Our findings highlight the potent microbicidal properties of Ag-AZI-Sol NPs and suggest diverse applications from food processing to medical device coatings.

Flexible Ti3C2Tx-Polyurethane Electrodes for Versatile Wearable Applications

With the development of science and technology, wearable electronics are increasingly widely used in medical, environmental monitoring, and other fields. Thus, the demand for flexible electrodes is increasing. The two-dimensional material Ti3C2Tx has attracted much attention in the manufacture of flexible electrodes due to its excellent mechanical and electrical properties. However, the brittleness of pure Ti3C2Tx films has become a major obstacle for their use as flexible electrodes in wearable devices. Therefore, solving the brittleness problem of flexible electrodes based on Ti3C2Tx while maintaining the excellent performance of Ti3C2Tx has become an urgent problem. To solve this problem, Ti3C2Tx was compounded with waterborne polyurethane (WPU), and a Ti3C2Tx-WPU composite film with a hierarchical structure was constructed by evaporation-assisted self-assembly. The Ti3C2Tx-WPU composite film not only retains the excellent electrical conductivity of Ti3C2Tx (100 S m-1) but also has flexibility (20 MJ m-3). Furthermore, the Ti3C2Tx-WPU composite film is applied to functional devices such as contact pressure sensors and non-contact proximity sensors. Finally, the Ti3C2Tx-WPU composite film wearable device demonstrates its practical application potential in the field of wearable devices.

A system for efficient and sustainable cogeneration of water and electricity: Temperature difference induced by photothermal conversion and evaporative cooling

Solar energy, with its sustainable properties, has garnered considerable attention for its potential to produce green electricity and clean water. This paper proposes a multistage energy transfer co-generation system (MWCNTs-covered thermoelectric module with aerogel and cooler, AC-CTEM) combining power generation and evaporative cooling. On the light-absorbing surface, the hot side of a thermoelectric module is covered with a hydrophobic coating made of PDMS and MWCNT. The cold side transfers heat to the evaporation zone using a heat sink. Aerogel evaporators are cross-linked with chitosan and polyurethane, which reduces the enthalpy of evaporation and facilitates efficient interfacial evaporation to remove heat and return it to refrigeration. Additionally, with the addition of Fresnel lenses and wind energy to the enhancement device, the system achieved an evaporation rate of 3.445 kg m-2 h-1 and an open-circuit voltage of 201.12 mV under 1 kW m-2 solar irradiation. The AC-CTEM system also demonstrated long-term stability and effectiveness in treating various types of non-potable water. Furthermore, we demonstrated the practical utility of the system by successfully cultivating grass seeds and powering electronic equipment. The AC-CTEM system exemplifies a practical energy-saving approach for the development of highly efficient co-generation systems.

Opportunities and Challenges in the Synthesis of Noble Metal Nanoparticles via the Chemical Route in Microreactor Systems

The process of noble metal nanoparticle synthesis is complex and consists of at least two steps: slow nucleation and fast autocatalytic growth. The kinetics of these two processes depends on the reductant "power" and the addition of stabilizers, as well as other factors (e.g., temperature, pH, ionic strength). Knowing these parameters, it is possible to synthesize materials with appropriate physicochemical properties, which can be simply adjusted by the type of the used metal, particle morphology and surface property. This, in turn, affects the possibility of their applications in various areas of life, including medicine, catalysis, engineering, fuel cells, etc. However, in some cases, the standard route, i.e., the chemical reduction of a metal precursor carried out in the batch reactor, is not sufficient due to problems with temperature control, properties of reagents, unstable or dangerous intermediates and products, etc. Therefore, in this review, we focused on an alternative approach to their chemical synthesis provided by microreactor systems. The use of microreactors for the synthesis of noble metal nanomaterials (e.g., Ag, Au, Pt, Pd), obtained by chemical reduction, is analyzed, taking into account investigations carried out in recent years. A particular emphasis is placed on the processes in which the use of microreactors removed the limitations associated with synthesis in a batch reactor. Moreover, the opportunities and challenges related to the synthesis of noble nanomaterials in the microreactor system are underlined. This review discusses the advantages as well as the problems of nanoparticle synthesis in microreactors.

Combined Liposome-Gold Nanoparticles from Honey: The Catalytic Effect of Cassyopea® Gold on the Thermal Isomerization of a Resonance-Activated Azobenzene

Gold nanoparticles (AuNPs) have been synthesized directly inside liposomes using honey as a reducing agent. The obtained aggregates, named Cassyopea® Gold due to the method used for their preparation, show remarkable properties as reactors and carriers of the investigated AuNPs. A mean size of about 150 nm and negative surface charge of -46 mV were measured for Cassyopea® Gold through dynamic light scattering and zeta potential measurements, respectively. The formation of the investigated gold nanoparticles into Cassyopea® liposomes was spectroscopically confirmed by the presence of their typical absorption band at 516 nm. The catalytic activity of the combined liposome-AuNP nanocomposites was tested via the thermal cis-trans isomerization of resonance-activated 4-methoxyazobenzene (MeO-AB). The kinetic rate constants (kobs) determined at 25 °C in the AuNP aqueous solution and in the Cassyopea® Gold samples were one thousand times higher than the values obtained when performing MeO-AB cis-trans conversion in the presence of pure Cassyopea®. The results reported herein are unprecedented and point to the high versatility of Cassyopea® as a reactor and carrier of metal nanoparticles in chemical, biological, and technological applications.

Stability and SERS signal strength of laser-generated gold, silver, and bimetallic nanoparticles at different KCl concentrations

Noble metal nanoparticles, specifically gold and silver, are extensively utilized in sensors, catalysts, surface-enhanced Raman scattering (SERS), and optical-electronic components due to their unique localized surface plasmon resonance (LSPR) properties. The production of these nanoparticles involves various methods, but among the environmentally friendly approaches, laser ablation stands out as it eliminates the need for toxic chemicals during purification. However, nanoparticle aggregation poses a challenge in laser ablation, necessitating the addition of extra materials that contaminate the otherwise clean process. In this study, we investigate the effectiveness of a biocompatible material, potassium chloride (KCl), in preventing particle aggregation. Although salt is known to trigger aggregation, we observed that certain concentrations of KCl can slow down this process. Over an eight-week period, we examined the aggregation rate, extinction behavior, and stability of gold, silver, and hybrid nanoparticles generated in different KCl concentrations. Extinction spectra, SEM images, SERS signal strength, and zeta potential were analyzed. Our results demonstrate that laser ablation in water and salt solutions yields nanoparticles with a spherical shape and a negative zeta potential. Importantly, we identified the optimal concentration of potassium chloride salt that maintains solution stability and SERS signal strength. Adsorbed chloride ions on silver nanoparticles were evidenced by low-frequency SERS band near 242 cm-1. A better understanding of the effect of KCl concentration on the properties of noble metal nanoparticles can lead to improved generation protocols and the development of tailored nanoparticle systems with enhanced stability and SERS activity.

Designing SERS nanotags for profiling overexpressed surface markers on single cancer cells: A review

This review focuses on the chemical design and the use of Surface-Enhanced Raman Scattering (SERS)-active nanotags for measuring surface markers that can be overexpressed at the surface of single cancer cells. Indeed, providing analytical tools with true single-cell measurements capabilities is capital, especially since cancer research is increasingly leaning toward single-cell analysis, either to guide treatment decisions or to understand complex tumor behaviour including the single-cell heterogeneity and the appearance of treatment resistance. Over the past two decades, SERS nanotags have triggered significant interest in the scientific community owing their advantages over fluorescent tags, mainly because SERS nanotags resist photobleaching and exhibit sharper signal bands, which reduces possible spectral overlap and enables the discrimination between the SERS signals and the autofluorescence background from the sample itself. The extensive efforts invested in harnessing SERS nanotags for biomedical purposes, particularly in cancer research, highlight their potential as the next generation of optical labels for single-cell studies. The review unfolds in two main parts. The first part focuses on the structure of SERS nanotags, detailing their chemical composition and the role of each building block of the tags. The second part explores applications in measuring overexpressed surface markers on single-cells. The latter encompasses studies using single nanotags, multiplexed measurements, quantitative information extraction, monitoring treatment responses, and integrating phenotype measurements with SERS nanotags on single cells isolated from complex biological matrices. This comprehensive review anticipates SERS nanotags to persist as a pivotal technology in advancing single-cell analytical methods, particularly in the context of cancer research and personalized medicine.

Synthesis, Structural Analysis, and Peroxidase-Mimicking Activity of AuPt Branched Nanoparticles

Bimetallic nanomaterials have generated significant interest across diverse scientific disciplines, due to their unique and tunable properties arising from the synergistic combination of two distinct metallic elements. This study presents a novel approach for synthesizing branched gold-platinum nanoparticles by utilizing poly(allylamine hydrochloride) (PAH)-stabilized branched gold nanoparticles, with a localized surface plasmon resonance (LSPR) response of around 1000 nm, as a template for platinum deposition. This approach allows precise control over nanoparticle size, the LSPR band, and the branching degree at an ambient temperature, without the need for high temperatures or organic solvents. The resulting AuPt branched nanoparticles not only demonstrate optical activity but also enhanced catalytic properties. To evaluate their catalytic potential, we compared the enzymatic capabilities of gold and gold-platinum nanoparticles by examining their peroxidase-like activity in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Our findings revealed that the incorporation of platinum onto the gold surface substantially enhanced the catalytic efficiency, highlighting the potential of these bimetallic nanoparticles in catalytic applications.

Multidentate polyoxometalate modification of metal nanoparticles with tunable electronic states

To respond to the increasing demands for practical applications, stabilization and property modulation of metal nanoparticles have emerged as a key research subject. Herein, we present a viable protocol for preparing small metal nanoparticles (<5 nm; Ag, Pd, Pt, and Ru) via multidentate polyoxometalate (POM, [SiW9O34]10-) modification. In addition to enhancing stability, the POMs can modulate the electronic states of metal nanoparticles. Moreover, immobilization of the POM-modified metal nanoparticles on solid supports enables further tuning of the electronic states via a cooperative effect between the POMs and the supports without altering the particle size. Notably, POM-modified Pd nanoparticles on carbon support exhibited superior catalytic activity and selectivity in hydrogenation reactions in comparison with the catalyst without the POM modification.

Surface-mediated fluorescent sensor array for identification of gut microbiota and monitoring of colorectal cancer

The development of efficient, accurate, and high-throughput technology for gut microbiota sensing holds great promise in the maintenance of health and the treatment of diseases. Herein, we developed a rapid fluorescent sensor array based on surface-engineered silver nanoparticles (AgNPs) and vancomycin-modified gold nanoclusters (AuNCs@Van) for gut microbiota sensing. By controlling the surface of AgNPs, the recognition ability of the sensor can be effectively improved. The sensor array was used to successfully discriminate six gut-derived bacteria, including probiotics, neutral, and pathogenic bacteria and even their mixtures. Significantly, the sensing system has also been successfully applied to classify healthy individuals and colorectal cancer (CRC) patients rapidly and accurately within 30 min, demonstrating its clinically relevant specificity.

Enhancing Sensitivity and Selectivity in Pesticide Detection: A Review of Cutting-Edge Techniques

The primary goal of our review was to systematically explore and compare the state-of-the-art methodologies employed in the detection of pesticides, a critical component of global food safety initiatives. New approach methods in the fields of luminescent nanosensors, chromatography, terahertz spectroscopy, and Raman spectroscopy are discussed as precise, rapid, and versatile strategies for pesticide detection in food items and agroecological samples. Luminescent nanosensors emerge as powerful tools, noted for their portability and unparalleled sensitivity and real-time monitoring capabilities. Liquid and gas chromatography coupled to spectroscopic detectors, stalwarts in the analytical chemistry field, are lauded for their precision, wide applicability, and validation in diverse regulatory environments. Terahertz spectroscopy offers unique advantages such as noninvasive testing, profound penetration depth, and bulk sample handling. Meanwhile, Raman spectroscopy stands out with its nondestructive nature, its ability to detect even trace amounts of pesticides, and its minimal requirement for sample preparation. While acknowledging the maturity and robustness of these techniques, our review underscores the importance of persistent innovation. These methodologies' significance extends beyond their present functions, highlighting their adaptability to meet ever-evolving challenges. Environ Toxicol Chem 2024;43:1468-1484. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Advances in Drug Delivery Systems for the Treatment of Acute Myeloid Leukemia

Acute myeloid leukemia (AML) is a common and catastrophic hematological neoplasm with high mortality rates. Conventional therapies, including chemotherapy, hematopoietic stem cell transplantation (HSCT), immune therapy, and targeted agents, have unsatisfactory outcomes for AML patients due to drug toxicity, off-target effects, drug resistance, drug side effects, and AML relapse and refractoriness. These intrinsic limitations of current treatments have promoted the development and application of nanomedicine for more effective and safer leukemia therapy. In this review, the classification of nanoparticles applied in AML therapy, including liposomes, polymersomes, micelles, dendrimers, and inorganic nanoparticles, is reviewed. In addition, various strategies for enhancing therapeutic targetability in nanomedicine, including the use of conjugating ligands, biomimetic-nanotechnology, and bone marrow targeting, which indicates the potential to reverse drug resistance, are discussed. The application of nanomedicine for assisting immunotherapy is also involved. Finally, the advantages and possible challenges of nanomedicine for the transition from the preclinical phase to the clinical phase are discussed.

SERS-based microdevices for use as in vitro diagnostic biosensors

Advances in surface-enhanced Raman scattering (SERS) detection have helped to overcome the limitations of traditional in vitro diagnostic methods, such as fluorescence and chemiluminescence, owing to its high sensitivity and multiplex detection capability. However, for the implementation of SERS detection technology in disease diagnosis, a SERS-based assay platform capable of analyzing clinical samples is essential. Moreover, infectious diseases like COVID-19 require the development of point-of-care (POC) diagnostic technologies that can rapidly and accurately determine infection status. As an effective assay platform, SERS-based bioassays utilize SERS nanotags labeled with protein or DNA receptors on Au or Ag nanoparticles, serving as highly sensitive optical probes. Additionally, a microdevice is necessary as an interface between the target biomolecules and SERS nanotags. This review aims to introduce various microdevices developed for SERS detection, available for POC diagnostics, including LFA strips, microfluidic chips, and microarray chips. Furthermore, the article presents research findings reported in the last 20 years for the SERS-based bioassay of various diseases, such as cancer, cardiovascular diseases, and infectious diseases. Finally, the prospects of SERS bioassays are discussed concerning the integration of SERS-based microdevices and portable Raman readers into POC systems, along with the utilization of artificial intelligence technology.

Tackling breast cancer with gold nanoparticles: twinning synthesis and particle engineering with efficacy

The World Health Organization identifies breast cancer as the most prevalent cancer despite predominantly affecting women. Surgery, hormonal therapy, chemotherapy, and radiation therapy are the current treatment modalities. Site-directed nanotherapeutics, engineered with multidimensional functionality are now the frontrunners in breast cancer diagnosis and treatment. Gold nanoparticles with their unique colloidal, optical, quantum, magnetic, mechanical, and electrical properties have become the most valuable weapon in this arsenal. Their advantages include facile modulation of shape and size, a high degree of reproducibility and stability, biocompatibility, and ease of particle engineering to induce multifunctionality. Additionally, the surface plasmon oscillation and high atomic number of gold provide distinct advantages for tailor-made diagnosis, therapy or theranostic applications in breast cancer such as photothermal therapy, radiotherapy, molecular labeling, imaging, and sensing. Although pre-clinical and clinical data are promising for nano-dimensional gold, their clinical translation is hampered by toxicity signs in major organs like the liver, kidneys and spleen. This has instigated global scientific brainstorming to explore feasible particle synthesis and engineering techniques to simultaneously improve the efficacy and versatility and widen the safety window of gold nanoparticles. The present work marks the first study on gold nanoparticle design and maneuvering techniques, elucidating their impact on the pharmacodynamics character and providing a clear-cut scientific roadmap for their fast-track entry into clinical practice.

Recent advances in molecular mechanisms of skin wound healing and its treatments

The skin, being a multifaceted organ, performs a pivotal function in the complicated wound-healing procedure, which encompasses the triggering of several cellular entities and signaling cascades. Aberrations in the typical healing process of wounds may result in atypical scar development and the establishment of a persistent condition, rendering patients more vulnerable to infections. Chronic burns and wounds have a detrimental effect on the overall quality of life of patients, resulting in higher levels of physical discomfort and socio-economic complexities. The occurrence and frequency of prolonged wounds are on the rise as a result of aging people, hence contributing to escalated expenditures within the healthcare system. The clinical evaluation and treatment of chronic wounds continue to pose challenges despite the advancement of different therapeutic approaches. This is mainly owing to the prolonged treatment duration and intricate processes involved in wound healing. Many conventional methods, such as the administration of growth factors, the use of wound dressings, and the application of skin grafts, are used to ease the process of wound healing across diverse wound types. Nevertheless, these therapeutic approaches may only be practical for some wounds, highlighting the need to advance alternative treatment modalities. Novel wound care technologies, such as nanotherapeutics, stem cell treatment, and 3D bioprinting, aim to improve therapeutic efficacy, prioritize skin regeneration, and minimize adverse effects. This review provides an updated overview of recent advancements in chronic wound healing and therapeutic management using innovative approaches.

High-performance grating-like SERS substrate based on machine learning for ultrasensitive detection of Zexie-Baizhu decoction

Rapid, universal and accurate identification of chemical composition changes in multi-component traditional Chinese medicine (TCM) decoction is a necessary condition for elucidating the effectiveness and mechanism of pharmacodynamic substances in TCM. In this paper, SERS technology, combined with grating-like SERS substrate and machine learning method, was used to establish an efficient and sensitive method for the detection of TCM decoction. Firstly, the grating-like substrate prepared by magnetron sputtering technology was served as a reliable SERS sensor for the identification of TCM decoction. The enhancement factor (EF) of 4-ATP probe molecules was as high as 1.90 × 107 and the limit of detection (LOD) was as low as 1 × 10-10 M. Then, SERS technology combined with support vector machine (SVM), decision tree (DT), Naive Bayes (NB) and other machine learning algorithms were used to classify and identify the three TCM decoctions, and the classification accuracy rate was as high as 97.78 %. In summary, it is expected that the proposed method combining SERS and machine learning method will have a high development in the practical application of multi-component analytes in TCM.

Functional nanomaterials as photosensitizers or delivery systems for antibacterial photodynamic therapy

Bacterial infection is a global health problem that closely related to various diseases threatening human life. Although antibiotic therapy has been the mainstream treatment method for various bacterial infectious diseases for decades, the increasing emergence of bacterial drug resistance has brought enormous challenges to the application of antibiotics. Therefore, developing novel antibacterial strategies is of great importance. By producing reactive oxygen species (ROS) with photosensitizers (PSs) under light irradiation, antibacterial photodynamic therapy (aPDT) has emerged as a non-invasive and promising approach for treating bacterial infections without causing drug resistance. However, the insufficient therapeutic penetration, poor hydrophilicity, and poor biocompatibility of traditional PSs greatly limit the efficacy of aPDT. Recently, studies have found that nanomaterials with characteristics of favorable photocatalytic activity, surface plasmonic resonance, easy modification, and high drug loading capacity can improve the therapeutic efficacy of aPDT. In this review, we aim to provide a comprehensive understanding of the mechanism of nanomaterials-mediated aPDT and summarize the representative nanomaterials in aPDT, either as PSs or carriers for PSs. In addition, the combination of advanced nanomaterials-mediated aPDT with other therapies, including targeted therapy, gas therapy, and multidrug resistance (MDR) therapy, is reviewed. Also, the concerns and possible solutions of nanomaterials-based aPDT are discussed. Overall, this review may provide theoretical basis and inspiration for the development of nanomaterials-based aPDT.

Silver Nanoparticles: Multifunctional Tool in Environmental Water Remediation

Water pollution is a worldwide environmental and health problem that requires the development of sustainable, efficient, and accessible technologies. Nanotechnology is a very attractive alternative in environmental remediation processes due to the multiple properties that are conferred on a material when it is at the nanometric scale. This present review focuses on the understanding of the structure-physicochemical properties-performance relationships of silver nanoparticles, with the objective of guiding the selection of physicochemical properties that promote greater performance and are key factors in their use as antibacterial agents, surface modifiers, colorimetric sensors, signal amplifiers, and plasmonic photocatalysts. Silver nanoparticles with a size of less than 10 nm, morphology with a high percentage of reactive facets {111}, and positive surface charge improve the interaction of the nanoparticles with bacterial cells and induce a greater antibacterial effect. Adsorbent materials functionalized with an optimal concentration of silver nanoparticles increase their contact area and enhance adsorbent capacity. The use of stabilizing agents in silver nanoparticles promotes selective adsorption of contaminants by modifying the surface charge and type of active sites in an adsorbent material, in addition to inducing selective complexation and providing stability in their use as colorimetric sensors. Silver nanoparticles with complex morphologies allow the formation of hot spots or chemical or electromagnetic bonds between substrate and analyte, promoting a greater amplification factor. Controlled doping with nanoparticles in photocatalytic materials produces improvements in their electronic structural properties, promotes changes in charge transfer and bandgap, and improves and expands their photocatalytic properties. Silver nanoparticles have potential use as a tool in water remediation, where by selecting appropriate physicochemical properties for each application, their performance and efficiency are improved.

Silver nanoparticles-based localized surface plasmon resonance biosensor for Escherichia coli detection

Escherichia coli (E. coli) bacteria with varying solution concentrations have been successfully detected using silver nanoparticles (Ag NPs)-based localized surface plasmon resonance (LSPR) biosensors. The Ag NPs were effectively synthesized by a chemical method using trisodium citrate with L-Histidine (L-His) and deposited on the surface of Au thin film-coated half-cylinder BK-7 prisms. He-Ne laser with a wavelength of 632.8 nm was used to generate LSPR phenomena in Kretschmann configuration with prism/Au thin film/His-Ag NPs/E. coli bacteria/air structure arrangements. The variation of E. coli bacteria concentration was carried out to determine the effect of E. coli bacteria concentration on the LSPR curve characteristics. The characterization results showed that the size of Ag NPs was 18.7 nm, and that of His-Ag NPs was 17.9 nm. Selected area electron diffraction results indicated the formation of diffraction rings with the presence of lattice planes (111), (200), (220), and (311), proving the face-centered cubic crystal structure of silver. The absorbance peak of Ag NPs shifted from a wavelength of 421-414 nm with an increase in band gap energy from 2.94 eV to 2.99 eV, along with a decreased average particle size. The functional groups observed in His-Ag NPs showed wavenumbers at 3320 to 3318 cm-1, 2106 to 2129 cm-1, and 1635 cm-1, showing the OH, CH, and C CO bonds, respectively. The SPR angle of the prism/Au thin film/air structure is 44.80°. Meanwhile, the LSPR angle for the prism/Au thin film/His-Ag NPs/air structure is 44.92°. There is an increase in the LSPR angle by 0.12°. Moreover, the minimum reflectance increases by 0.02. After detecting E. coli bacteria, the LSPR angle shifted by 0.26°, 0.38°, and 0.49° for concentrations of 6.0 × 108 CFU/mL, 6.0 × 107 CFU/mL and 6.0 × 106 CFU/mL respectively. However, the minimum reflectance rose from 0.09° to 0.14°, 0.20°, and 0.22°. Moreover, SPR testing with the structure of the prism/Au thin film/E. coli bacteria/air was carried out to determine the contribution of His-Ag NPs for detecting E. coli bacteria. The results showed that no angular shift occurs. These results indicate that using Ag NPs encapsulated with L-His is essential in amplifying the SPR signal and detecting E. coli bacteria. There was a notable alteration in both the LSPR angle and minimum reflectance indicating that adding His-Ag NPs facilitated the interaction between the E. coli and the sensor surface, thereby enhancing the performance of LSPR-based sensors for E. coli detection for low limit of detection value at 0.47 CFU/mL.

Gold Nanoparticles (AuNPs)-Toxicity, Safety and Green Synthesis: A Critical Review

In recent years, the extensive exploration of Gold Nanoparticles (AuNPs) has captivated the scientific community due to their versatile applications across various industries. With sizes typically ranging from 1 to 100 nm, AuNPs have emerged as promising entities for innovative technologies. This article comprehensively reviews recent advancements in AuNPs research, encompassing synthesis methodologies, diverse applications, and crucial insights into their toxicological profiles. Synthesis techniques for AuNPs span physical, chemical, and biological routes, focusing on eco-friendly "green synthesis" approaches. A critical examination of physical and chemical methods reveals their limitations, including high costs and the potential toxicity associated with using chemicals. Moreover, this article investigates the biosafety implications of AuNPs, shedding light on their potential toxic effects on cellular, tissue, and organ levels. By synthesizing key findings, this review underscores the pressing need for a thorough understanding of AuNPs toxicities, providing essential insights for safety assessment and advancing green toxicology principles.

Conductivity-Based Gas Sensors Using Tamarindus indica Polysaccharide-Capped Gold Nanoparticles for the Detection of Volatile Gases

Gold nanoparticles (nAu) were synthesized by a sustainable approach utilizing tamarind seed polysaccharide (TSP). Polysaccharides are naturally occurring polymers derived from tamarind seeds, which function both as capping and reducing agents. Polyaniline (PANI) was subsequently capped over the as-prepared gold nanoparticles in order to facilitate the sensor property. The TSP-nAu-PANI film was fabricated by Methods I and II and utilized in the investigation of active sensor devices for the detection of organic pollutants such as benzene, toluene, and chloroform. The synthesized gold nanoparticles and the TSP-nAu-PANI films were analyzed using several analytical and spectral tools. Among the two methods, the Method II (TSP-nAu-PANI) film has a high sensing response toward benzene (105.69%), toluene (96.99%), and chloroform (74.98%). TSP is also a proton-conducting biopolymer, which enhances the conductivity of the material. The combination with the PANI layer of the film adsorbs the vapors easily and the prepared film material is more effective and ideal for sensing toxic gases.

The Interaction of Amines with Gold Nanoparticles

Understanding the interactions between amines and the surface of gold nanoparticles is important because of their role in the stabilization of the nanosystems, in the formation of the protein corona, and in the preparation of semisynthetic nanozymes. By using fluorescence spectroscopy, electrochemistry, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and molecular simulation, a detailed picture of these interactions is obtained. Herein, it is shown that amines interact with surface Au(0) atoms of the nanoparticles with their lone electron pair with a strength linearly correlating with their basicity corrected for steric hindrance. The kinetics of binding depends on the position of the gold atoms (flat surfaces or edges) while the mode of binding involves a single Au(0) with nitrogen sitting on top of it. A small fraction of surface Au(I) atoms, still present, is reduced by the amines yielding a much stronger Au(0)-RN.+ (RN. , after the loss of a proton) interaction. In this case, the mode of binding involves two Au(0) atoms with a bridging nitrogen placed between them. Stable Au nanoparticles, as those required for robust semisynthetic nanozymes preparation, are better obtained when the protein is involved (at least in part) in the reduction of the gold ions.

Nanotechnology's frontier in combatting infectious and inflammatory diseases: prevention and treatment

Inflammation-associated diseases encompass a range of infectious diseases and non-infectious inflammatory diseases, which continuously pose one of the most serious threats to human health, attributed to factors such as the emergence of new pathogens, increasing drug resistance, changes in living environments and lifestyles, and the aging population. Despite rapid advancements in mechanistic research and drug development for these diseases, current treatments often have limited efficacy and notable side effects, necessitating the development of more effective and targeted anti-inflammatory therapies. In recent years, the rapid development of nanotechnology has provided crucial technological support for the prevention, treatment, and detection of inflammation-associated diseases. Various types of nanoparticles (NPs) play significant roles, serving as vaccine vehicles to enhance immunogenicity and as drug carriers to improve targeting and bioavailability. NPs can also directly combat pathogens and inflammation. In addition, nanotechnology has facilitated the development of biosensors for pathogen detection and imaging techniques for inflammatory diseases. This review categorizes and characterizes different types of NPs, summarizes their applications in the prevention, treatment, and detection of infectious and inflammatory diseases. It also discusses the challenges associated with clinical translation in this field and explores the latest developments and prospects. In conclusion, nanotechnology opens up new possibilities for the comprehensive management of infectious and inflammatory diseases.

Rapid Fabrication of High-Resolution Flexible Electronics via Nanoparticle Self-Assembly and Transfer Printing

Printed electronic technology serves as a key component in flexible electronics and wearable devices, yet achieving compatibility with both high resolution and high efficiency remains a significant challenge. Here, we propose a rapid fabrication method of high-resolution nanoparticle microelectronics via self-assembly and transfer printing. The tension gradient-electrostatic attraction composite-induced nanoparticle self-assembly strategy is constructed, which can significantly enhance the self-assembly efficiency, stability, and coverage by leveraging the meniscus Marangoni effect and the electric double-layer effect. The close-packed nanoparticle self-assembly layer can be rapidly formed on microstructure surfaces over a large area. Inspired by ink printing, a transfer printing strategy is further proposed to transform the self-assembly layer into conformal micropatterns. Large-area, high-resolution (2 μm), and ultrathin (1 μm) nanoparticle microelectronics can be stably fabricated, yielding a significant improvement over fluid printing methods. The unique deformability, recoverability, and scalability of nanoparticle microelectronics are revealed, providing promising opportunities for various academic and real applications.

Carbon dots@noble metal nanoparticle composites: research progress report

Carbon dots@noble metal nanoparticle composites are formed by combining carbon dots and metal nanoparticles using various strategies. Carbon dots exhibit a reducing ability and function as stabilisers; consequently, metal-ion solutions can be directly reduced by them to synthesise gold, silver, and gold-silver alloy particles. Carbon dots@gold/silver/gold-silver particle composites have demonstrated the potential for several practical applications owing to their superior properties and simple preparation process. Until now, several review articles have been published to summarise fluorescent carbon dots or noble metal nanomaterials. Compared with metal-free carbon dots, carbon dots@noble metal nanoparticles have a unique morphology and structure, resulting in new physicochemical properties, which allow for sensing, bioimaging, and bacteriostasis applications. Therefore, to promote the effective development of carbon dots@noble metal nanoparticle composites, this paper primarily reviews carbon dots@gold/silver/gold-silver alloy nanoparticle composites for the first time in terms of the following aspects. (1) The synthesis strategies of carbon dots@noble metal nanoparticle composites are outlined. The principle and function of carbon dots in the synthesis strategies are examined. The advantages and disadvantages of these methods and composites are analysed. (2) The characteristics and properties of such composites are described. (3) The applications of these composite materials are summarised. Finally, the potentials and limitations of carbon dots@noble metal nanoparticle composites are discussed, thus laying the foundation for their further development.

Materials-Driven Soft Wearable Bioelectronics for Connected Healthcare

In the era of Internet-of-things, many things can stay connected; however, biological systems, including those necessary for human health, remain unable to stay connected to the global Internet due to the lack of soft conformal biosensors. The fundamental challenge lies in the fact that electronics and biology are distinct and incompatible, as they are based on different materials via different functioning principles. In particular, the human body is soft and curvilinear, yet electronics are typically rigid and planar. Recent advances in materials and materials design have generated tremendous opportunities to design soft wearable bioelectronics, which may bridge the gap, enabling the ultimate dream of connected healthcare for anyone, anytime, and anywhere. We begin with a review of the historical development of healthcare, indicating the significant trend of connected healthcare. This is followed by the focal point of discussion about new materials and materials design, particularly low-dimensional nanomaterials. We summarize material types and their attributes for designing soft bioelectronic sensors; we also cover their synthesis and fabrication methods, including top-down, bottom-up, and their combined approaches. Next, we discuss the wearable energy challenges and progress made to date. In addition to front-end wearable devices, we also describe back-end machine learning algorithms, artificial intelligence, telecommunication, and software. Afterward, we describe the integration of soft wearable bioelectronic systems which have been applied in various testbeds in real-world settings, including laboratories that are preclinical and clinical environments. Finally, we narrate the remaining challenges and opportunities in conjunction with our perspectives.

Multijet Gold Nanoparticle Inks for Additive Manufacturing of Printed and Wearable Electronics

Conductive and biofriendly gold nanomaterial inks are highly desirable for printed electronics, biosensors, wearable electronics, and electrochemical sensor applications. Here, we demonstrate the scalable synthesis of stable gold nanoparticle inks with low-temperature sintering using simple chemical processing steps. Multiprinter compatible aqueous gold nanomaterial inks were formulated, achieving resistivity as low as ∼10-6 Ω m for 400 nm thick films sintered at 250 °C. Printed lines with a resolution of <20 μm and minimal overspray were obtained using an aerosol jet printer. The resistivity of the printed patterns reached ∼9.59 ± 1.2 × 10-8 Ω m after sintering at 400 °C for 45 min. Our aqueous-formulated gold nanomaterial inks are also compatible with inkjet printing, extending the design space and manufacturability of printed and flexible electronics where metal work functions and chemically inert films are important for device applications.

Monocyte (THP-1) Response to Silver Nanoparticles Synthesized with Rumex hymenosepalus Root Extract

The study, synthesis, and application of nanomaterials in medicine have grown exponentially in recent years. An example of this is the understanding of how nanomaterials activate or regulate the immune system, particularly macrophages. In this work, nanoparticles were synthesized using Rumex hymenosepalus as a reducing agent (AgRhNPs). According to thermogravimetric analysis, the metal content of nanoparticles is 55.5% by weight. The size of the particles ranges from 5-26 nm, with an average of 11 nm, and they possess an fcc crystalline structure. The presence of extract molecules on the nanomaterial was confirmed by UV-Vis and FTIR. It was found by UPLC-qTOF that the most abundant compounds in Rh extract are flavonols, flavones, isoflavones, chalcones, and anthocyanidins. The viability and apoptosis of the THP-1 cell line were evaluated for AgRhNPs, commercial nanoparticles (AgCNPs), and Rh extract. The results indicate a minimal cytotoxic and apoptotic effect at a concentration of 12.5 μg/mL for both nanoparticles and 25 μg/mL for Rh extract. The interaction of the THP-1 cell line and treatments was used to evaluate the polarization of monocyte subsets in conjunction with an evaluation of CCR2, Tie-2, and Arg-1 expression. The AgRhNPs nanoparticles and Rh extract neither exhibited cytotoxicity in the THP-1 monocyte cell line. Additionally, the treatments mentioned above exhibited anti-inflammatory effects by maintaining the classical monocyte phenotype CD14++CD16, reducing pro-inflammatory interleukin IL-6 production, and increasing IL-4 production.

Influence of Carboxymethyl Cellulose on the Green Synthesis of Gold Nanoparticles Using Gliricidia sepium and Petiveria alliacea Extracts: Surface-Enhanced Raman Scattering Effect Evaluation

Gold nanoparticles (AuNPs) were synthesized and stabilized using ecological strategies: the extracts of the leaves of the plants Gliricidia sepium (GS) and Petiveria alliacea (PA) reduced the metallic Au ions to AuNPs. The AuNPs were analyzed as surface-enhanced Raman scattering (SERS) substrates for pyridoxine detection (vitamin B6). UV-vis spectroscopy was carried out to assess the stability of the AuNPs. As a result, absorption bands around 530 and 540 nm were obtained for AuNPs-PA and AuNPs-GS, respectively. Both cases associated it with localized surface plasmon resonance (LSPR). In the final stage of the synthesis, to stabilize the AuNPs, carboxymethyl cellulose (CMC) was added; however, LSPR bands do not exhibit bathochromic or hypsochromic shifts with the addition of CMC. Transmission electron microscopy (TEM) micrographs show relatively spherical morphologies; the particle diameters were detected around 7.7 and 12.7 nm for AuNPs-PA and AuNPs-GS, respectively. The nanomaterials were evaluated as SERS substrates on pyridoxine, revealing an intensification in the vibrational mode centered at 688 cm-1 associated with the pyridinic ring. Complementarily, different density functional theory functionals were included to obtain molecular descriptors on the Aun-cluster-pyridoxine interaction to study the SERS behavior.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Migration of spent grain-modified colloidal ferrihydrite: Implications for the in situ stabilization of arsenic, lead, and cadmium in co-contaminated soil

The increase of metal mining, processing, and smelting activities has precipitated a substantial escalation in the contamination of soil by heavy metals. Ferrihydrite (FH) has been commonly used as an amendment for the immobilization of heavy metals in contaminated soil. However, FH suffers from drawbacks such as agglomeration and nonmigratory characteristics, which limit its practical application in soil remediation. Herein, a novel spent grain-modified ferrihydrite (FH-SG) colloidal system was developed, and the FH-SG transport mechanisms in the soil medium were fully studied, focusing in particular on the simultaneous in situ stabilization of arsenic (As), lead (Pb), and cadmium (Cd) in co-contaminated soil. The results showed that the stabilization rates of the FH-SG material reached 94.66%, 96.12%, and 95.52% for water-soluble As, Pb, and Cd, respectively, and 72.22%, 49.39%, and 25.30% for bioavailable As, Pb, and Cd, respectively. The FH-SG material demonstrates notable migration properties in porous media. Theoretical calculation results of a single collector show that the migration deposition of FH-SG material in media is primarily governed by its inherent diffusion characteristics with minimal influence by gravitational forces and media interception. It is noteworthy that the maximum migration distance in quartz sand and soil media with different particle sizes can reach 2.07-2.92 m and 0.78-1.08 m, respectively. Altogether, our findings clearly demonstrate that FH-SG exhibits better stabilization and migration than those of FH alone and most proposed FH colloidal systems. The FH-SG colloidal system holds significant promise for the remediation of various kinds of complex polluted soil.

Nanotechnology in coronary heart disease

Coronary heart disease (CHD) is one of the major causes of death and disability worldwide, especially in low- and middle-income countries and among older populations. Conventional diagnostic and therapeutic approaches have limitations such as low sensitivity, high cost and side effects. Nanotechnology offers promising alternative strategies for the diagnosis and treatment of CHD by exploiting the unique properties of nanomaterials. In this review, we use bibliometric analysis to identify research hotspots in the application of nanotechnology in CHD and provide a comprehensive overview of the current state of the art. Nanomaterials with enhanced imaging and biosensing capabilities can improve the early detection of CHD through advanced contrast agents and high-resolution imaging techniques. Moreover, nanomaterials can facilitate targeted drug delivery, tissue engineering and modulation of inflammation and oxidative stress, thus addressing multiple aspects of CHD pathophysiology. We discuss the application of nanotechnology in CHD diagnosis (imaging and sensors) and treatment (regulation of macrophages, cardiac repair, anti-oxidative stress), and provide insights into future research directions and clinical translation. This review serves as a valuable resource for researchers and clinicians seeking to harness the potential of nanotechnology in the management of CHD. STATEMENT OF SIGNIFICANCE: Coronary heart disease (CHD) is the one of leading cause of death and disability worldwide. Nanotechnology offers new strategies for diagnosing and treating CHD by exploiting the unique properties of nanomaterials. This review uses bibliometric analysis to uncover research trends in the use of nanotechnology for CHD. We discuss the potential of nanomaterials for early CHD detection through advanced imaging and biosensing, targeted drug delivery, tissue engineering, and modulation of inflammation and oxidative stress. We also offer insights into future research directions and potential clinical applications. This work aims to guide researchers and clinicians in leveraging nanotechnology to improve CHD patient outcomes and quality of life.

Nanocomposites of Cu2O with plasmonic metals (Au, Ag): design, synthesis, and photocatalytic applications

Metal-semiconductor nanocomposites have been utilized in a multitude of applications in a wide array of fields, prompting substantial interest from different scientific sectors. Of particular interest are semiconductors paired with plasmonic metals due to the unique optical properties that arise from the individual interactions of these materials with light and the intercomponent movement of charge carriers in their heterostructure. This review focuses on the pairing of Cu2O semiconductor with strongly plasmonic metals, particularly Au and Ag. The design and synthesis of Au-Cu2O and Ag-Cu2O nanostructures, along with ternary nanostructures composed of the three components, are described, with in-depth discussion on the synthesis techniques and tunable parameters. The effects of compositing on the optical and electronic properties of the nanocomposites in the context of photocatalysis are discussed as well. Concluding remarks and potential areas for exploration are presented in the last section.

Three-dimensional building of anisotropic gold nanoparticles under confinement in submicron capsules

The low collision rate and contact time of gold nanoparticles (NPs) in solution afford a low welding probability, which hinders their welding structure, orientation, and dimension. Encapsulated anisotropic NPs, gold nanotriangles (AuNTs), were successfully assembled into a three-dimensional structure inside a permeable silica nanocapsule under light illumination to generate localized surface plasmon resonance (LSPR). AuNTs were trapped in the permeable silica nanocapsules and diffused in the nanospace because of copolymer release, which increased the contact probability of AuNTs and promoted the three-dimensional building of AuNTs. Electron energy loss mapping simulations revealed that the obtained three-dimensional AuNT structure exhibited spatially separated multiple LSPR modes with different energies of incident light, which are photophysically attractive beyond the facet-selective chemical growth of NPs, and postmodification for anchoring substances with site-selective attachment to the obtained structure will be applicable to expand the sensing design and class of substances for sensing.

Tunable random laser based on hybrid plasmonic enhancement

This research investigates the hybridized plasmonic response of silver film combined with dispersed silver (Ag) nanowires (NWs) to random laser emission. The mixture of Rhodamine B (RhB) dye and polyvinyl alcohol (PVA) matrix is taken as the gain medium for random lasing, and the silver combination provides feedback mechanisms for light trapping. Importantly, film roughness and the coupling between localized and extended (delocalized) surface plasmons play a vital role in RL performance evaluation. The laser threshold is strongly influenced by film thickness attributed to surface roughness. Furthermore, the variation in film thickness also supports the wavelength modulation of 9 nm (597 nm to 606 nm), which results from the reabsorption of RhB. Additionally, the intriguing capability of emission wavelength tuning under the variation of temperature facilitates exciting prospects for precise wavelength control in plasmonic devices.

First-principles study of mercaptoundecanoic acid molecule adsorption and gas molecule penetration onto silver surface: an insight for corrosion protection

Recently, 11-mercaptoundecanoic acid (MUA) molecule has attracted attention as a promising passivation agent of Ag nanowire (NW) network electrode for corrosion inhibition, but the underneath mechanism has not been elaborated. In this work, we investigate adsorption of MUA molecule on Ag(1 0 0) and Ag(1 1 1) surface, adsorption of air gas molecules of H2O, H2S and O2 on MUA molecular end surface, and their penetrations into the Ag surface using the first-principles calculations. Our calculations reveal that the MUA molecule is strongly bound to the Ag surface with the binding energies ranging from -0.47 to -2.06 eV and the Ag-S bond lengths of 2.68-2.97 Å by Lewis acid-base reaction. Furthermore, we find attractive interactions between the gas molecules and the MUA@Ag complexes upon their adsorptions and calculate activation barriers for their migrations from the outermost end of the complexes to the top of Ag surface. It is found that the penetrations of H2O and H2S are more difficult than the O2 penetration due to their higher activation barriers, while the O2 penetration is still difficult, confirming the corrosion protection of Ag NW network by adsorbing the uniform monolayer of MUA. With these findings, this work can contribute to finding a better passivation agent in the strategy of corrosion protection of Ag NW network electrode.

Motif-to-Core Nucleation in a Decahedral Evolution Pattern

The atomic precision of ultrasmall metal nanoclusters has opened the door to elucidating the structural evolution principles of metal nanomaterials at the molecular level. Here, we report a novel set of super-atomic Ag clusters, including [Ag19(TBBT)16(DPPP)4]+ (Ag19), [Ag22(DMAT)8(DPPM)4Cl8]2+ (Ag22), Ag26(SPh3,5-CF3)15(DPPF)4Cl5 (Ag26), and [Ag30(DMAT)12(DPPP)4Cl8]2+ (Ag30). The core structures of these clusters correspond to one decahedral Ag7, perpendicular bi-decahedrons, three-dimensional penta-decahedrons, and hexa-decahedrons, respectively. The Ag atoms in AgS2 blocks show a strong correlation with the decahedral cores: the five equatorial Ag atoms in the decahedral Ag7 core of Ag19 all adopt the AgS2 coordination, while the Ag atoms in AgS2 blocks of Ag22, Ag26, and Ag30 unexceptionally constitute additional decahedral structures with the core Ag atoms. Specifically, two and four core Ag atoms of Ag26 and Ag30 clusters occupy positions that highly resemble that of Ag (in AgS2 motifs) of Ag22. The strong structural correlation demonstrates the motif-to-core evolution of the surface Ag (on AgS2) to build extra-decahedral blocks. Density functional theory calculations indicate that the 2e, 4e, 6e, and 8e clusters (from Ag19 to Ag30) adopt 1S2, 1S21P2, 1S21P4, and 1S21P6 electron configurations, all of which feature excellent super-atomic characters.

Tumor-derived covalent organic framework nanozymes for targeted chemo-photothermal combination therapy

Covalent organic frameworks (COFs) have garnered enormous attention in anti-cancer therapy recently. However, the intrinsic drawbacks such as poor biocompatibility and low target-specificity greatly restrain the full clinical implementation of COF. Herein, we report a biomimetic multifunctional COF nanozyme, which consists of AIEgen-based COF (TPE-s COF) with encapsulated gold nanoparticles (Au NPs). The nanozyme was co-cultured with HepG2 cells until the cell membrane was fused with lipophilic TPE-s COF-Au@Cisplatin. By using the cryo-shocking method, we fabricated an inactivated form of the TPE-s COF-Au@Cisplatin nanozyme endocytosed in the HepG2 cell membrane (M@TPE-s COF-Au@Cisplatin), which lost their proliferative ability and pathogenicity. Upon laser irradiation, the M@TPE-s COF-Au@Cisplatin nanozymes cleaved, thereby releasing the TPE-s COF-Au nanozyme and Cisplatin to exert their photothermal and drug therapeutic effect. This work opens a new avenue to the synthesis of tumor-derived fluorescent TPE-s COF-Au nanozymes for highly efficient, synergetic, and targeted chemo-photothermal combination therapy of liver cancer.

Multimorphological Remoldable Silver Nanomaterials from Multimode and Multianalyte Colorimetric Sensing to Molecular Information Technology

Inspired by life's interaction networks, ongoing efforts are to increase complexity and responsiveness of multicomponent interactions in the system for sensing, programmable control, or information processing. Although exquisite preparation of single uniform-morphology nanomaterials has been extremely explored, the potential value of facile and one-pot preparation of multimorphology nanomaterials has been seriously ignored. Here, multimorphological silver nanomaterials (M-AgN) prepared by one pot can form interaction networks with various analytes, which can be successfully realized from multimode and multianalyte colorimetric sensing to molecular information technology (logic computing and security). The interaction of M-AgN with multianalytes not only induces multisignal responses (including color, absorbance, and wavelength shift) for sensing metal ions (Cr3+, Hg2+, and Ni2+) but also can controllably reshape its four morphologies (nanodots, nanoparticles, nanorods, and nanotriangles). By abstracting binary relationships between analytes and response signals, multicoding parallel logic operations (including simple logic gates and cascaded circuits) can be performed. In addition, taking advantage of natural concealment and molecular response characteristics of M-AgN nanosystems can also realize molecular information encoding, encryption, and hiding. This research not only promotes the construction and application of multinano interaction systems based on multimorphology and multicomponent nanoset but also provides a new imagination for the integration of sensing, logic, and informatization.

Effects of citrate-stabilized gold and silver nanoparticles on some safety parameters of Porphyridium cruentum biomass

Introduction: Our research raises the question of how realistic and safe it is to use gold and silver nanoparticles in biotechnologies to grow microalgae, which will later be used to obtain valuable products. To this purpose, it was necessary to assess the influence of 10 and 20 nm Au and Ag nanoparticles stabilized in citrate on the growth of microalga Porphyridium cruentum in a closed cultivation system, as well as some safety parameters of biomass quality obtained under experimental conditions. Methods: Two types of experiments were conducted with the addition of nanoparticles on the first day and the fifth day of the cultivation cycle. Changes in productivity, lipid content, malondialdehyde (MDA), as well as antioxidant activity of microalgae biomass have been monitored in dynamics during the life cycle in a closed culture system. Results: The impact of nanoparticles on the growth curve of microalgae culture was marked by delaying the onset of the exponential growth phase. A significant increase in the content of lipids and MDA in biomass was noted. Excessive accumulation of lipid oxidation products within the first 24 h of cultivation resulted in altered antioxidant activity of red algae extracts. Discussion: Citrate-stabilized gold and silver nanoparticles proved to be a stress factor for red microalga Porphyridium cruentum, causing significant changes in both biotechnological and biomass safety parameters. Addition of Au and Ag nanoparticles during the exponential growth phase of porphyridium culture led to an enhanced lipid accumulation and reduced MDA values in biomass.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Polythiophene as a Double-Electrostatic Template for Zinc Oxide and Gold: Multicomponent Nano-Objects for Enhanced Photocatalysis

Using electrostatic self-assembly and electrostatic nanotemplating, a quaternary nanostructured system consisting of zinc oxide nanoparticles, gold nanoparticles, poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (PT), and methyltrioctylammonium chloride (MTOA) (PT-MTOA-ZnO-Au) was designed for aqueous photocatalysis. The PT-MTOA hollow sphere aggregates served as an electrostatic template for both individual inorganic nanoparticles controlling their morphology, stabilizing the nanoparticles, and acting as a photosensitizer. The hybrid structures included spherical ZnO nanoparticles with a diameter of d = 2.6 nm and spherical Au nanoparticles with d = 6.0 nm embedded in PT-MTOA hollow spheres with a hydrodynamic radius of R_H = 100 nm. The ZnO nanoparticles acted as the main catalyst, while the Au nanoparticles acted as the cocatalyst. As a photocatalytic model reaction, the dye degradation of methylene blue in aqueous solution using the full spectral range from UV to visible light was tested. The photocatalytic activity was optimized by varying the Zn and Au loading ratios and was substantially enhanced regarding the components; for example, it was increased by about 61% using PT-MTOA-ZnO-Au compared to the composite without gold particles. A photocatalytic mechanism of the methylene blue degradation was proposed when catalyzed by these multicomponent nano-objects. Thus, a simple procedure of templating two different nanoparticle species within the same cocatalytically active template has been demonstrated, which can be extended to other inorganic particles, making a variety of task-specific catalysts accessible.

Magnetite nanoparticle coating chemistry regulates root uptake pathways and iron chlorosis in plants

Understanding the fundamental interaction of nanoparticles at plant interfaces is critical for reaching field-scale applications of nanotechnology-enabled plant agriculture, as the processes between nanoparticles and root interfaces such as root compartments and root exudates remain largely unclear. Here, using iron deficiency-induced plant chlorosis as an indicator phenotype, we evaluated the iron transport capacity of Fe3O4 nanoparticles coated with citrate (CA) or polyacrylic acid (PAA) in the plant rhizosphere. Both nanoparticles can be used as a regulator of plant hormones to promote root elongation, but they regulate iron deficiency in plant in distinctive ways. In acidic root exudates secreted by iron-deficient Arabidopsis thaliana, CA-coated particles released fivefold more soluble iron by binding to acidic exudates mainly through hydrogen bonds and van der Waals forces and thus, prevented iron chlorosis more effectively than PAA-coated particles. We demonstrate through roots of mutants and visualization of pH changes that acidification of root exudates primarily originates from root tips and the synergistic mode of nanoparticle uptake and transformation in different root compartments. The nanoparticles entered the roots mainly through the epidermis but were not affected by lateral roots or root hairs. Our results show that magnetic nanoparticles can be a sustainable source of iron for preventing leaf chlorosis and that nanoparticle surface coating regulates this process in distinctive ways. This information also serves as an urgently needed theoretical basis for guiding the application of nanomaterials in agriculture.

Design of competition nanoreactor with shell-isolated colloidal plasmonic nanomaterials for quantitative sensor platform

Shell-isolated colloid plasmonic nanomaterials-based nanoreactor is a well-established platform widely applied in catalyst or Surface Enhanced Raman Scattering (SERS) sensors. The potentials versatility of nanoreactor platform is mainly implemented by the well-defined and tailorable structure of colloid plasmonic nanomaterials. Currently, a competitive conjugative-mediated nanoreactor is introduced to determine glucose with SERS. Glucose-conjugating nanoreactor, as convertors of the sensors, are constructed by coordinated deposition colloidal gold nanoparticles with sodium nitroprusside framework (Au@SNF) and covalently bonded 4-mercaptopyridine (4-Mpy) with self-assembly strategy. The nanoreactor contained the signal-amplifier Au@SNF NPs, conjugative-mediated signal receiver 4-Mpy, and signal internal standard molecular CN^-. In addition to well-defined morphology and functionality, conjugative-mediated and internal standards method are also employed to benefit the nanoreactor. The two-parameter strategy significantly improves the signal indication and correction. Using this proposed platform, the competitive-mediated nanoreactor provides a quantitative SERS detection of glucose, and extends the applicability of SERS in more complicated and reproducibility analysis. Meanwhile, the nanoreactor based sensors also exhibited better properties to detect glucose in various food samples and bio-samples which provided strongly appliance for glucose sensors.

Double-ring-disk hybrid nanostructures with slits for electric field enhancement

Although noble metal nanoantennas have distinctive optical properties and local electric field enhancement, considerable non-radiative ohmic losses occur at the optical frequencies, consequently creating significant absorption and unwanted heating. Combining the plasmon mode of metal nanoantennas with the anapole mode of high refractive index dielectric materials offers a promising alternative to increase the electric field strength with minimal loss. Herein, a silicon disk with slots and two Au rings with a coupling mechanism are described. To elucidate the field enhancement mechanism, the near-field enhancement features and near-field electric field distributions are explored by a numerical simulation and multipole decomposition analysis. By opening the slit to generate high-intensity hot spots inside the disk, the electric field can be enhanced significantly, and nearby molecules can directly contact these hot spots. The resulting large field enhancement suggests significant applications to strong photon-exciton coupling and nonlinear photonics.

Chemical background of silver nanoparticles interfering with mammalian copper metabolism

The rapidly increasing application of silver nanoparticles (AgNPs) boosts their release into the environment, which raises a reasonable alarm for ecologists and health specialists. This is manifested as increased research devoted to the influence of AgNPs on physiological and cellular processes in various model systems, including mammals. The topic of the present paper is the ability of silver to interfere with copper metabolism, the potential health effects of this interference, and the danger of low silver concentrations to humans. The chemical properties of ionic and nanoparticle silver, supporting the possibility of silver release by AgNPs in extracellular and intracellular compartments of mammals, are discussed. The possibility of justified use of silver for the treatment of some severe diseases, including tumors and viral infections, based on the specific molecular mechanisms of the decrease in copper status by silver ions released from AgNPs is also discussed.

Effect of Physiological Fluid on the Photothermal Properties of Gold Nanostructured

Colloidal gold particles have been extensively studied for their potential in hyperthermia treatment due to their ability to become excited in the presence of an external laser. However, their light-to-heat efficiency is affected by the physiologic environment. In this study, we aimed to evaluate the ability of gold sphere, rod, and star-shaped colloids to elevate the temperature of blood plasma and breast cancer-simulated fluid under laser stimulation. Additionally, the dependence of optical properties and colloid stability of gold nanostructures with physiological medium, particle shape, and coating was determined. The light-to-heat efficiency of the gold particle is shape-dependent. The light-to-heat conversion efficiency of a star-shaped colloid is 36% higher than that of sphere-shaped colloids. However, the raised temperature of the surrounding medium is the lowest in the star-shaped colloid. When gold nanostructures are exited with a laser stimulation in a physiological fluid, the ions/cations attach to the surface of the gold particles, resulting in colloidal instability, which limits electron oscillation and diminishes the energy generated by the plasmonic excitation. Fluorescein (Fl) and polyethylene glycol (PEG) attached to gold spheres enhances their colloidal stability and light-to-heat efficiency; post-treatment, they remand their optical properties.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Pegylated Gold Nanoparticles Conjugated with siRNA: Complexes Formation and Cytotoxicity

Drug delivery systems such as dendrimers, liposomes, polymers or gold/silver nanoparticles could be used to advance modern medicine. One significant pharmacological problem is crossing biological barriers by commonly used drugs, e.g., in the treatment of neurodegenerative diseases, which have a problem of the blood-brain barrier (BBB) restricting drug delivery. Numerous studies have been conducted to find appropriate drug carriers that are safe, biocompatible and efficient. In this work, we evaluate pegylated gold nanoparticles AuNP14a and AuNP14b after their conjugation with therapeutic siRNA directed against APOE4. This genetic risk factor remains the strongest predictor for late-onset Alzheimer’s disease. The study aimed to assess the biophysical properties of AuNPs/siAPOE complexes and to check their biological safety on healthy cells using human brain endothelial cells (HBEC-5i). Techniques such as fluorescence polarization, circular dichroism, dynamic light scattering, ζ-potential measurements and gel retardation assay showed that AuNPs form stable complexes with siRNA. Subsequently, cytotoxicity assays proved the biological safety of formed conjugates. Obtained results enabled us to find effective concentrations of AuNPs when complexes are formed and non-toxic for healthy cells. One of the studied nanoparticles, AuNP14b complexed with siRNA, displayed lower cytotoxicity (MTT assay, cells viability −74.8 ± 3.1%) than free nanoparticles (44.7 ± 3.6%). This may be promising for further investigations in nucleic acid delivery and could have practical use in treating neurodegenerative diseases.