Fingerprinting Plastic-Associated Inorganic and Organic Matter on Plastic Aged in the Marine Environment for a Decade

Dynamics and functions of microbial communities in the plastisphere in temperate coastal environments

Microbial attachment and biofilm formation on microplastics (MPs <5 mm in size) in the environment have received growing attention. However, there is limited knowledge of microbial function and their effect on the properties and behavior of MPs in the environment. In this study, microbial communities in the plastisphere were explored to understand microbial ecology as well as their impact on aquatic ecosystems. Using the amplicon sequencing of 16S and internal transcribed spacer (ITS) genes, we uncovered the composition and diversity of bacterial and fungal communities in samples of MPs (fiber, film, foam, and fragment), surface water, bottom sediment, and coastal sand in two contrasting coastal areas of Japan. Differences in microbial diversity and taxonomic composition were detected depending on sample type (MPs, water, sediment, and sand) and the research site. Although relatively higher bacterial and fungal gene counts were determined in MP fragments and foams from the research sites, there were no significant differences in microbial community composition depending on the morphotypes of MPs. Given the colonization by hydrocarbon-degrading communities and the presence of pathogens on MPs, the complex processes of microbial taxa influence the characteristics of MP-associated biofilms, and thus, the properties of MPs. This study highlights the metabolic functions of microbes in MP-associated biofilms, which could be key to uncovering the true impact of plastic debris on the global ecosystem.

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Landscape fire smoke airway exposure impairs respiratory and cardiac function and worsens experimental asthma

BACKGROUND

Millions of people are exposed to landscape fire smoke (LFS) globally, and inhalation of LFS particulate matter (PM) is associated with poor respiratory and cardiovascular outcomes. However, how LFS affects respiratory and cardiovascular function is less well understood.

OBJECTIVE

We aimed to characterize the pathophysiologic effects of representative LFS airway exposure on respiratory and cardiac function and on asthma outcomes.

METHODS

LFS was generated using a customized combustion chamber. In 8-week-old female BALB/c mice, low (25 μg/m3, 24-hour equivalent) or moderate (100 μg/m3, 24-hour equivalent) concentrations of LFS PM (10 μm and below [PM10]) were administered daily for 3 (short-term) and 14 (long-term) days in the presence and absence of experimental asthma. Lung inflammation, gene expression, structural changes, and lung function were assessed. In 8-week-old male C57BL/6 mice, low concentrations of LFS PM10 were administered for 3 days. Cardiac function and gene expression were assessed.

RESULTS

Short- and long-term LFS PM10 airway exposure increased airway hyperresponsiveness and induced steroid insensitivity in experimental asthma, independent of significant changes in airway inflammation. Long-term LFS PM10 airway exposure also decreased gas diffusion. Short-term LFS PM10 airway exposure decreased cardiac function and expression of gene changes relating to oxidative stress and cardiovascular pathologies.

CONCLUSIONS

We characterized significant detrimental effects of physiologically relevant concentrations and durations of LFS PM10 airway exposure on lung and heart function. Our study provides a platform for assessment of mechanisms that underpin LFS PM10 airway exposure on respiratory and cardiovascular disease outcomes.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Trophic transfer and interfacial impacts of micro(nano)plastics and per-and polyfluoroalkyl substances in the environment

Both micro(nano)plastics (MNPs) and per-and polyfluoroalkyl substances (PFAS) possessed excellent properties and diverse applications, albeit gained worldwide attention due to their anthropogenic, ubiquitous, degradation resistant nature and a wide variety of ecological and human health impacts. MNPs and PFAS discharged from discrete sources and extensively bioaccumulated in the food chain through trophic transfer and their long-distance transport potential assist in their dispersal to pristine but vulnerable ecosystems such as Antarctica. They inevitably interacted with each other in the environment through polarized N-H bond, hydrogen bond, hydrophobic interaction, and weak bond energies such as Van der Waals, electrostatic, and intramolecular forces. During co-exposure, they significantly impact the uptake and bioaccumulation of each other in exposed organisms, which may increase or decrease their bioavailable concentration. Hence, this review compiles the studies on the co-occurrence and adsorption of PFAS and MNPs in the environment, their trophic transfer, combined in vivo and in vitro impacts, and factors influencing the MNP-PFAS interface. A significant proportion of studies were conducted in China, Europe, and the US, while studies are rare from other parts of the world. Freshwater and marine food chains were more prominently investigated for trophic transfers compared to terrestrial food chains. The most notable in vivo effects were growth and reproductive impairment, oxidative stress, neurotoxicity and apoptosis, DNA damage, genotoxicity and immunological responses, behavioral and gut microbiota modifications, and histopathological alterations. Cellular uptake of PFAS and MNPs can impact cell survival and proliferation, photosynthesis and membrane integrity, ROS generation and antioxidant responses, and extracellular polymeric substances (EPS) release in vitro. MNP characteristics, PFAS properties, tissue and species-dependent distribution, and environmental medium properties were the main factors influencing the PFAS and MNP nexus and associated impacts. Last but not least, gaps and future research directions were highlighted to better understand the interplay between these critical persistent chemicals.

Organic pollutants adsorbed on microplastics: Potential indicators for source appointment of microplastics

Pollution by microplastics (MPs) has caused potential threats to the environment. Understanding the sources of MPs in the environment can help control their emissions and reduce environmental risks. Source apportionment of MPs has been conducted according to the characteristics of MPs themselves (such as types of polymers and morphological characteristics). However, the specificity and resolution of the appointments of sources need to be improved. Organic pollutants adsorbed on MPs can be used as a novel and reliable indicator to identify the source of MPs in the environment. In the present work, the analytical methods of MPs and organic pollutants adsorbed on MPs were critically reviewed, and the occurrence of organic pollutants and factors influencing their adsorption on MPs were discussed. Furthermore, the potential applications of organic pollutants adsorbed on MPs as indicators for determining the sources of MPs were highlighted. The study would help recognize the sources of MPs, which will support efforts aimed at reducing their emissions and further pollution of the ecosystem.

Adsorption of copper by naturally and artificially aged polystyrene microplastics and subsequent release in simulated gastrointestinal fluid

Microplastics, especially aged microplastics can become vectors of metals from environment to organisms with potential negative effects on food chain. However, a few studies focused on the bioavailability of adsorbed metals and most studies related to aged microplastics used artificial method that cannot entirely reflect actual aging processes. In this study, virgin polystyrene was aged by ozone (PS-O3), solar simulator (PS-SS) and lake (PS-lake) to investigate adsorption of Cu by virgin, artificially and naturally aged microplastics and subsequent release in simulated gastrointestinal fluids (SGF). Characterization results show carbonyl was formed in PS-O3 and PS-SS, and the oxidation degree was PS-O3 > PS-SS > PS-lake. However, Cu adsorption capacity followed this order PS-lake (158 μg g-1) > PS-SS (117 μg g-1) > PS-O3 (65 μg g-1) > PS-virgin (0). PS-O3 showed highest Cu adsorption capacity at 0.5 h (71 μg g-1), but it dropped dramatically later (10 μg g-1, 120 h), because PS-O3 could break up and the adsorbed Cu released in solutions subsequently. For PS-lake, precipitation of metallic oxides contributes to the accumulation of Cu. The addition of dissolved organic matter (DOM) could occupy adsorption sites on PS and compete with Cu, but also can attach PS and adsorb Cu due to its rich functional groups. The simultaneous ingestion of microplastics with food suggested that adsorbed Cu is solubilized mostly from aged PS to SGF.

Characteristics of microplastic-derived dissolved organic matter and its binding with pharmaceuticals unveiled by fluorescence spectroscopy and two-dimensional correlation spectroscopy

Microplastics were an extensively detected pollutant in the environment, but microplastic-derived dissolved organic matter (MP-DOM) has received less attention, much less its impact on the binding behavior of pollutants (e.g., pharmaceuticals). In this study, DOM derived from two typical MPs, i.e., polyethylene terephthalate (PET) and polystyrene (PS) was generated by UV irradiation (a widely used way for MPs' aging treatment) and characterized by multiple spectroscopic techniques and methods. Chloramphenicol (CAP) and carbamazepine (CBZ) were selected to investigate the binding mechanism between MP-DOM and pharmaceuticals. After UV irradiation, the concentration of the dissolved organic carbon, colored DOM, and carboxyl/carbonyl groups of MP-DOM increased. Moreover, the humic-like substance released preceding and more under UV irradiation. Furthermore, the protein-like substances on PET-DOM and the humic-like substances on PS-DOM were positively correlated to the binding capacity to the pharmaceuticals, respectively. 2D-COS results revealed that the fluorescent materials having more oxygen-containing functional groups for MP-DOM preferentially interacted with the pharmaceuticals. Overall, the higher fluorescence quenching was related to the protein-like substance, CBZ, and PET-DOM as compared to the humic-like substance, CAP, and PS-DOM. It was verified by the relatively high binding ability (logKM) for them (the protein-like substance: 5.15; CBZ: 4.61; PET: 4.48). This study first proved the environmental reactivity of MP-DOM to the pharmaceuticals highlighting the significance of the spectral properties for the binding behavior of MP-DOM with pharmaceuticals and the competitive sorption role of MP-DOM to the pollutants in the natural environment.

Aging in soil increases the disturbance of microplastics to the gut microbiota of soil fauna

Microplastics (MPs) in the soil environment inevitably experience aging processes. However, how aging in soil affects MP toxicity to soil fauna remains poorly understood. In this study, two types of widely distributed MPs (polypropylene and tire wear particles) were aged in different soils, and their surface properties, morphology, leaching features of additives, biofilm colonization and toxicity to the typical soil fauna Enchytraeus crypticus were investigated. Results showed that aging in soil slightly changed the surface properties and morphology for both types of MPs, but significantly affected the release of additives, especially for those MPs aged in soil amended with manure. Moreover, a distinct and less diverse microbial community than the surrounding soils was formed on the surface of MPs, and MP type was a determinant of the biofilm microbial community. Exposure experiments indicated that aged MPs, especially those aged in soil with manure significantly affected the reproduction of soil worms with a more obvious disturbance to their gut microbiota, and biofilm features and changes in the leaching properties of MPs during aging were the main factors for these shifts. This study is the first attempt to reveal the role of aging in soil in MP toxicity to soil fauna.

Short-term plastisphere colonization dynamics across six plastic types

Marine plastic pollution is a major concern worldwide, but the understanding of plastisphere dynamics remains limited in the southern hemisphere. To address this knowledge gap, we conducted a study in South Australia to investigate the prokaryotic community of the plastisphere and its temporal changes over 4 weeks. We submerged six plastic types (i.e., High-Density Polyethylene [HDPE], Polyvinyl chloride [PVC], Low-Density Polyethylene [LDPE], Polypropylene [PP], Polystyrene [PS] and the understudied textile, polyester [PET]) and wood in seawater and sampled them weekly to characterize the prokaryotic community using 16S rRNA gene metabarcoding. Our results showed that the plastisphere composition shifted significantly over short time scales (i.e., 4 weeks), and each plastic type had distinct groups of unique genera. In particular, the PVC plastisphere was dominated by Cellvibrionaceae taxa, distinguishing it from other plastics. Additionally, the textile polyester, which is rarely studied in plastisphere research, supported the growth of a unique group of 25 prokaryotic genera (which included the potential pathogenic Legionella genus). Overall, this study provides valuable insights into the colonization dynamics of the plastisphere over short time scales and contributes to narrowing the research gap on the southern hemisphere plastisphere.

Effects of phthalate and bisphenol plasticizers on the activity of glycolytic enzymes of the moth Spodoptera littoralis

Environmental plastic pollution has significantly increased in the recent decades, and severely impacts economies, human and biodiversity health. Plastics are made of several chemical additives, including bisphenol and phthalate plasticizers such as bisphenol A (BPA) and Di(2-ethylhexyl)phthalate (DEHP). In some animal species, both BPA and DEHP are known as endocrine disruptor compounds, and can alter physiological and metabolic homeostasis, reproduction, development and/or behavior. To date, the impacts of BPA and DEHP have mainly focused on vertebrates, and to a lesser extent, on aquatic invertebrates. Yet, the few studies which examined the effects of DEHP on terrestrial insects also revealed the impacts this pollutant can have on development, hormone titrations, and metabolic profiles. In particular, it has been hypothesized in the Egyptian cotton leafworm Spodoptera littoralis that the observed metabolic alterations could result from the energetic costs necessary for DEHP detoxification or to the dysregulation of hormonally-controlled enzymatic activities. To get additional insights into the physiological effects of bisphenol and phthalate plasticizers on the moth S. littoralis, larvae were fed with food contaminated by BPA, DEHP, or the mixture of both compounds. Then, activities of four glycolytic enzymes, hexokinase, phosphoglucose isomerase, phosphofructokinase, and pyruvate kinase were measured. BPA and/or DEHP had no effects on the activities of phosphofructokinase and pyruvate kinase. Conversely, BPA-contaminated larvae were characterized by a 1.9-fold increase in phosphoglucose isomerase activity, and BPA + DEHP-fed larvae had highly variable hexokinase activity. Overall, since no disruption of glycolytic enzyme was observed in DEHP-contaminated larvae, our work tended to demonstrate that exposure to bisphenol and DEHP increased the amount of oxidative stress experienced.

Exploring into a light-avoided environment: Mechanical-thermal coupled conditions responsible for the aging behavior of plastic waste in landfills

Plastics in landfills undergo a unique micronization process due to multi-factor and light-avoided conditions, but their aging process in such a typical environment remains unexplored. This study investigated the aging behavior of polyethylene plastics, representative of landfills, under simulated dynamic mechanical forces and high temperature-two prevalent environmental factors in landfills. The study explored the individual and combined contributions of these factors to the aging process. Results indicated that high temperature played a primary role in aging plastics by depolymerization and degradation through ·OH production, while mechanical forces contributed mainly to surface structure breakdown. The combined effect leads to more serious surface damage, creating holes, cracks, and scratches that provide access for free radical reactions to plastic bulk, thereby accelerating the aging and micronization process. The resulting microplastics were found to be 14.25 ± 0.53 μg L-1. Aged plastics exhibit a rapid aging rate of depolymerization and oxidation compared to virgin plastics due to their weak properties, suggesting a higher potential risk of microplastic generation. This study fills a knowledge gap regarding the aging behavior of plastics under complex and light-avoided landfill conditions, emphasizing the need for increased attention to the evolution process of microplastics from aged plastic waste in landfills.

Environmental occurrence and ecotoxicity of aquaculture-derived plastic leachates

Plastic products such as fishing nets and foam buoys have been widely used in aquaculture. To enhance the desirable characteristics of the final equipment, plastic gear for aquaculture is mixed with a wide range of additives. Recent studies have shown that additives could be leached out to the environment with a long-term use of aquaculture plastics, forming aquaculture-derived plastic leachates. It should be emphasized that some leachates such as phthalic acid esters (PAEs) and organophosphate esters (OPEs) are endocrine disruptors, which could increase the exposure risk of aquatic products and subsequently display potential threats to human health via food chain. However, systematic studies on the release, occurrence, bioaccumulation, and toxic effects of aquaculture-derived plastic leachates are missing, overlooking their potential sources and ecotoxicological risks in aquatic environments. We have reviewed and compared the concentrations of major plastic leachates in the water environment and organisms of global aquaculture and non-farmed areas, confirming that aquaculture leachate is an important source of contaminants in the environment. Moreover, the toxic effects of aquaculture-derived plastic additives and the related mechanisms are summarized with fish as a representative, revealing their potential health risk. In addition, we proposed current challenges and future research needs, which provides scientific guidance for the use and management of plastic products in aquaculture industries.

The unheeded inherent connections and overlap between microplastics and poly- and perfluoroalkyl substances: A comprehensive review

Microplastics (MPs) and poly- and perfluoroalkyl substances (PFASs) are receiving global attention due to their widespread presences and considerable level in the environment. Although the occurrence and fate of MPs and PFASs alone have been extensively studied, little was known about their unheeded connection and overlap between the two. Therefore, this review attempts to reveal it for the purpose of providing a new view from joint consideration of the two in the future studies. Initially, the critically examined data on the co-sources and existence of MPs and PFASs are summarized. Surprisingly, some products could be co-source of MPs and PFASs which are general in daily life while the distribution of the two is primary influenced by the human activity. Then, their interactions are reviewed based on the fact that PFASs can be sorbed onto MPs which are regarded as a vector of contaminations. The electrostatic interaction and hydrophobic contact are the predominant sorption mechanisms and could be influenced by environmental factors and properties of MPs and PFASs. The effects of MPs on the transport of PFASs in the environments, especially in aquatic environments are then discussed. Additionally, the current state of knowledge on the combined toxicity of MPs and PFASs are presented. Finally, the existing problems and future perspectives are outlined at the end of the review. This review provides an advanced understanding of the overlap, interaction and toxic effects of MPs and PFASs co-existing in the environment.

Heterogeneity of plastic residue was determined by both mulch film and external plastic pollutants in the farmland of Northeast China

Plastic pollution in farmland ecosystems has been widely concerned. However, the heterogeneity and driving mechanisms of plastic residue (PR) remain unclear in the farmland surrounded by complex pollution points. In this study, the abundance, mass, and accumulation areas of PR of mulch film (MF) and non-MF (NMF) were investigated in a large area of the vegetable field covered by plastic mulching in a long-term in Northeast China. Geostatistics combined with classical statistics were used to clarify how pollution source and migration factors change the PR heterogeneity in the farmlands. Results indicated that the MF type was only polyethylene (PE) (79.1 % of total PR), while NMF accounted for 20.9 % of total PR. As well, NMF-polypropylene (PP) and NMF-PE accounted for 45.3 % and 39.7 % of total NMF respectively, followed by polystyrene accounting for 7.5 %. In the 0-20 cm soil layer, the spatial autocorrelation of mass and accumulation areas of MF were significantly (p < 0.05) positive, and their spatial pattern tended to cluster. The accumulation areas of MF was predoniment in northwest and southeast near the roadside in all soil layers, while the accumulation areas of NMF was higher near the landfill in the 0-20 cm soil layer. Landfill and residential areas were critical sources of PR for the farmland. Southwest wind and southeast wind were the main driving force of PR migration and their annual migration rates were 23.7 and 19.8 m·year^-1. The functional groups on the surface of plastics were different after degradation (including different types and different utilization methods), and PR was oxidized could release or adsorb toxic substances from the soils. Generally, in order to reduce PR pollution, in addition to source control and recycling, farmland tillage should be avoided in the weather when the wind speed is strong, especially near the PR pollution source.

Field management changes the distribution of mesoplastic and macroplastic in Mollisols of Northeast China

Mesoplastic (MaP) and macroplastic (MeP) coming from plastic mulching tend to cause negative effects on biota in ecosystems. However, it is still not clear how field management influences the distribution of MeP/MaP in soils. In this study, MeP/MaP was investigated in 0-20 and 20-30 cm soil layers of three vegetable fields (3.4-6.5 ha) after 13 years plastic-mulching in Mollisols of Northeast China under different management methods (MM) of fertilization and tillage frequency. The tillage frequency was MM2 > MM1 > MM3, while the fertilization was MM1 > MM2 > MM3. The results showed that polyethylene (PE), polypropylene (PP), polystyrene, polyvinyl chloride, polyethylene terephthalate (PET), polyamide, melamine-formaldehyde resin and polyether urethane were found in soil, and PE (>83.76%, from plastic mulching) was the predominant type of MeP/MaP. MeP abundance was significantly (p < 0.05) higher in MM1 and MM2 than that in MM3 in the 0-20 cm soil layer. MM1 and MM2 had the highest abundance of MeP/MaP of size <4 cm² and 4-16 cm², while MM3 had the highest abundance at the size >16 cm². The broken index of MeP/MaP was significantly (p < 0.05) lower in MM2 compared with MM1 and MM3 in the 20-30 cm soil layer. Both tillage frequency and fertilization accelerate the breaking of plastics, especially since the influence was stronger from fertilization. Compared with original plastics, the PE, PP and PET's carbonyl index was significantly (p < 0.05) higher in the three MMs. Generally, fertilization and frequent tillage can reduce the physical effects of large-sized plastic debris on crop growth and increases the negative effects of small-sized plastic and new pollutants formed on biota in the agroecosystems. MeP/MaP recycling should be strengthened, and the irrigation and rotation of farmland should be carried out when the wind speed is weak to avoid plastic invasion.

Roles of microplastic-derived dissolved organic matter on the photodegradation of organic micropollutants

Microplastic-derived dissolved organic matter (MP-DOM) is ubiquitous in water environment and exhibits photosensitivity. However, little is known about the effects of MP-DOM on the photodegradation of organic micropollutants in natural water. In this study, we investigated the effect of MP-DOM derived from two typical plastics, i.e., polystyrene (PS), and polyethylene (PE), on the photodegradation of a typical organic micropollutants sulfamethoxazole (SMX) in a simulative natural water system. MP-DOM exerted a significant inhibition on the SMX photodegradation, mainly attributed to the direct photolysis inhibition of SMX caused by the inner filter effect and the complexation effect. Despite the enhanced reactive oxygen species (ROS) generation with the increase of their steady-state concentration by 41.1 - 160.7 %, PS-DOM exhibited high oxidation resistance, causing an inhibition on the photodegradation of SMX probably through transferring electrons to the SMX intermediates. This study helps to deepen the understanding of microplastic photochemical behavior in natural water.

Degradation and adsorption behavior of biodegradable plastic PLA under conventional weathering conditions

With the increasing pollution of plastics and the widespread use of polylactic acid (PLA), its weathering process in the natural environment needs to be studied. Hence, we investigated the characteristics of PLA under conventional weathering conditions and the adsorption behavior between PLA and tetracycline (TC). The results showed cracks and holes in the weathered PLA surface, an increase in oxygen-containing functional groups, and a 77.94 % decrease in contact angle, causing more amount of TC to be adsorbed. The maximum adsorption capacity of PLA for TC is approximately 3.5 times higher than before weathering due to multilayer physical adsorption. Nevertheless, the surface of the microplastics weathered by seawater did not change significantly. This work elucidates the weathering mechanism of biodegradable microplastics under abiotic conditions, thus correctly assessing the difference in natural and conventional degradability of biodegradable plastics.

The potential of saltmarsh halophytes for phytoremediation of metals and persistent organic pollutants: An Australian perspective

Persistent organic and inorganic pollutants are among the most concerning pollutants in Australian estuaries due to their persistent, ubiquitous, and potentially toxic nature. Traditional methods of soil remediation often fall short of practical implementation due to high monetary investment, environmental disturbance, and potential for re-contamination. Phytoremediation is gaining traction as an alternative, or synergistic mechanism of contaminated soil remediation. Phytoremediation utilises plants and associated rhizospheric microorganisms to stabilise, degrade, transform, or remove xenobiotics from contaminated mediums. Due to their apparent cross-tolerance to salt, metals, and organic contaminants, halophytes have shown promise as phytoremediation species. This review examines the potential of 93 species of Australian saltmarsh halophytes for xenobiotic phytoremediation. Considerations for the practical application of phytoremediation in Australia are discussed, including mechanisms of enhancement, and methods of harvesting and disposal. Knowledge gaps for the implementation of phytoremediation in Australian saline environments are identified, and areas for future research are suggested.

Microplastics benefit bacteria colonization and induce microcystin degradation

Microplastics (MPs) can sorb toxic substances and be colonized by microorganisms. However, the interactions between the adsorbed toxic substances and the MPs biofilm remains inadequately understood. Here, a 37-days microcosm experiment was conducted to investigate the influence of polystyrene microplastics (PS-MPs) on microcystin (MC-LR) behavior in turbulent scenarios. The results revealed that adsorption by PS-MPs was the primary process that led to a quick reduction of aquatic MC-LR concentrations. With the colonization of microorganisms on the PS-MPs, the attached biofilm altered the surface properties of PS-MPs, which enhanced the bio-adsorption of MC-LR. Meanwhile, microcystins degrading bacteria, such as Sphingomonadaceae and Methylophilaceae, inhabited in the biofilm, which facilitated the MC-LR biodegradation; this was also demonstrated by the identified MC-LR degradation products. Thus, the MC-LR concentration in water was constantly decreased, with a maximum removal capability of 35.8% in PS-MPs added groups. In addition, a 25% reduction of MC-LR was recorded in PS-MPs added static water. This suggested that the interaction between PS-MPs, biofilm, and MC-LR may be prevalent in natural waters. Our results indicate MPs as vectors for toxic substances could be a double-edged sword (adsorption and biodegradation), which provides new insights for understanding the ecological risks of microplastics.

Key knowledge gaps for One Health approach to mitigate nanoplastic risks

There are increasing concerns over the threat of nanoplastics to environmental and human health. However, multidisciplinary barriers persist between the communities assessing the risks to environmental and human health. As a result, the hazards and risks of nanoplastics remain uncertain. Here, we identify key knowledge gaps by evaluating the exposure of nanoplastics in the environment, assessing their bio-nano interactions, and examining their potential risks to humans and the environment. We suggest considering nanoplastics a complex and dynamic mixture of polymers, additives, and contaminants, with interconnected risks to environmental and human health. We call for comprehensive integration of One Health approach to produce robust multidisciplinary evidence to nanoplastics threats at the planetary level. Although there are many challenges, this holistic approach incorporates the relevance of environmental exposure and multi-sectoral responses, which provide the opportunity to identify the risk mitigation strategies of nanoplastics to build resilient health systems.

Biofilms Enhance the Adsorption of Toxic Contaminants on Plastic Microfibers under Environmentally Relevant Conditions

Microplastics (MPs) exposed to the natural environment provide an ideal surface for biofilm formation, which potentially acts as a reactive phase facilitating the sorption of hazardous contaminants. Until now, changes in the contaminant sorption capacity of MPs due to biofilm formation have not been quantified. This is the first study that compared the capacity of naturally aged, biofilm-covered microplastic fibers (BMFs) to adsorb perfluorooctane sulfonate (PFOS) and lead (Pb) at environmentally relevant concentrations. Changes in the surface properties and morphology of aged microplastic fibers (MF) were studied by surface area analysis, infrared spectroscopy, and scanning electron microscopy. Results revealed that aged MFs exhibited higher surface areas because of biomass accumulation compared to virgin samples and followed the order polypropylene>polyethylene>nylon>polyester. The concentrations of adsorbed Pb and PFOS were 4-25% and 20-85% higher in aged MFs and varied among the polymer types. The increased contaminant adsorption was linked with the altered surface area and the hydrophobic/hydrophilic characteristics of the samples. Overall, the present study demonstrates that biofilms play a decisive role in contaminant-plastic interactions and significantly enhance the vector potential of MFs for toxic environmental contaminants. We anticipate that knowledge generated from this study will help refine the planetary risk assessment of MPs.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material’s hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material's hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.