Overlooked Formation of H2O2 during the Hydroxyl Radical-Scavenging Process When Using Alcohols as Scavengers

The profound review of Fenton process: What's the next step?

Fenton and Fenton-like processes, which could produce highly reactive species to degrade organic contaminants, have been widely used in the field of wastewater treatment. Therein, the chemistry of Fenton process including the nature of active oxidants, the complicated reactions involved, and the behind reason for its strongly pH-dependent performance, is the basis for the application of Fenton and Fenton-like processes in wastewater treatment. Nevertheless, the conflicting views still exist about the mechanism of the Fenton process. For instance, reaching a unanimous consensus on the nature of active oxidants (hydroxyl radical or tetravalent iron) in this process remains challenging. This review comprehensively examined the mechanism of the Fenton process including the debate on the nature of active oxidants, reactions involved in the Fenton process, and the behind reason for the pH-dependent degradation of contaminants in the Fenton process. Then, we summarized several strategies that promote the Fe(II)/Fe(III) cycle, reduce the competitive consumption of active oxidants by side reactions, and replace the Fenton reagent, thus improving the performance of the Fenton process. Furthermore, advances for the future were proposed including the demand for the high-accuracy identification of active oxidants and taking advantages of the characteristic of target contaminants during the degradation of contaminants by the Fenton process.

Simultaneous inactivation of Microcystis aeruginosa and degradation of microcystin-LR in water by activation of periodate with sunlight

Harmful algal blooms pose tremendous threats to ecological safety and human health. In this study, simulated solar light (SSL) irradiation was used to activate periodate (PI) for the inactivation of Microcystis aeruginosa and degradation of microcystin-LR (MC-LR). We found that PI-SSL system could effectively inactivate 5 × 106 cells·mL-1 algal cells below the limit of detection within 180 min. ·OH and iodine (IO3· and IO4·) radicals generated in PI-SSL system could rupture cell membranes, releasing intracellular substances including MC-LR into the reaction system. However, the released MC-LR could be degraded into non-toxic small molecules via hydroxylation and ring cleavage processes in PI-SSL system, reducing their environmental risks. High algae inactivation performance of PI-SSL system in solution with a wide pH range (3-9), with the coexisting anions (Cl-, NO3- and SO42-) and the copresence of natural organic matters (humic acid and fulvic acid), real water (lake water and river water), as well as in continuous-flow reactor (14 h) were also achieved. In addition, under natural sunlight irradiation, effective algae inactivation could also be achieved in an enlarged reactor (1 L). Overall, our study showed that PI-SSL system could avoid the inference by the background substances and could be employed as a feasible technique to treat algal bloom water.

Dinuclear Tridentate Ru(II) Complex with Strong Near-Infrared Light-Triggered Anticancer Activity

The design of the dinuclear Ru(II) complex (Ru2) with strong near-infrared (NIR) absorption properties has been reported for efficient anticancer phototherapy. Under 700 nm LED light excitation, Ru2 exhibited remarkable synergistic type I/II photosensitization ability and photocatalytic activity toward intracellular biomolecules. Ru2 showed impressive 700 nm light-triggered anticancer activity under normoxia and hypoxia compared with the clinically used photosensitizer Chlorin e6. The mechanistic studies showed that Ru2 induced intracellular redox imbalance and perturbed the energy metabolism and biosynthesis in A549 cancer cells. Overall, this work provides a new strategy for developing efficient metal-based complexes for anticancer phototherapy under NIR light.

FePO4/WB as an efficient heterogeneous Fenton-like catalyst for rapid removal of neonicotinoid insecticides: ROS quantification, mechanistic insights and degradation pathways

Iron-based catalysts for peroxymonosulfate (PMS) activation hold considerable potential in water treatment. However, the slow conversion of Fe(III) to Fe(II) restricts its large-scale application. Herein, an iron phosphate tungsten boride composite (FePO4/WB) was synthesized by a simple hydrothermal method to facilitate the Fe(III)/Fe(II) redox cycle and realize the efficient degradation of neonicotinoid insecticides (NEOs). Based on electron paramagnetic resonance (EPR) characterization, scavenging experiments, chemical probe approaches, and quantitative tests, both radicals (HO• and SO4⋅-) and non-radicals (1O2 and Fe(IV)) were produced in the FePO4/WB-PMS system, with relative contributions of 3.02 %, 3.58 %, 6.24 %, and 87.16 % to the degradation of imidacloprid (IMI), respectively. Mechanistic studies revealed that tungsten boride (WB) promoted the reduction of FePO4, and the generated Fe(II) dominantly activated PMS through a two-electron transfer to form Fe(IV), while a minority of Fe(II) engaged in a one-electron transfer with PMS to produce SO4⋅-, HO•, and 1O2. In addition, four degradation pathways of NEOs were proposed by analyzing the byproducts using UPLC-Q-TOF-MS/MS. Besides, seed germination experiments revealed the biotoxicity of NEOs was significantly reduced after degradation via the FePO4/WB-PMS system. Meanwhile, the recycling experiments and continuous flow reactor experiments showed that FePO4/WB exhibited high stability. Overall, this study provided a new perspective on water remediation by Fenton-like reaction. ENVIRONMENTAL IMPLICATION: Neonicotinoids (NEOs) are a type of insecticide used widely around the world. They've been found in many aquatic environments, raising concerns about their possible negative effects on the environment and health. Iron-based catalysts for peroxymonosulfate (PMS) activation hold great promise for water purification. However, the slow conversion of Fe(III) to Fe(II) restricts its large-scale application. Herein, iron phosphate tungsten boride composite (FePO4/WB) was synthesized by a simple hydrothermal method to facilitate the Fe(III)/Fe(II) redox cycle and realize the efficient degradation of NEOs. The excellent stability and reusability provided a great prospect for water remediation.

Visible light triggers the formation of reactive oxygen species in monoclonal antibody formulations

Most monoclonal antibody formulations require the presence of a surfactant, such as polysorbate, to ensure protein stability. The presence of high concentrations of polysorbate have been shown to enhance photooxidation of certain protein drug products when exposed to visible light. The current literature, however, suggest that photooxidation of polysorbate only occurs when exposed to visible light in combination with UVA light. This is probable as peroxides present in polysorbate solutions can be cleaved homolytically in the UVA region. In the visible region, photooxidation is not expected to occur as cleavage of peroxides is not expected at these wavelengths. This report presents findings suggesting that the presence of one or more photosensitiser(s) in polysorbate must be a cause and is required to catalyse the aerobic oxidation of polysorbate solutions upon exposure to visible light. Our investigation aimed to clarify the mechanism(s) of polysorbate photooxidation and explore the kinetics and the identity of the generated radicals and their impact on monoclonal antibody (mAb) degradation. Our study reveals that when polysorbate solutions are exposed to visible light between 400 - 800 nm in the absence of proteins, discolouration, radical formation, and oxygen depletion occur. We discuss the initial formation of reactive species, most likely occurring directly after reaction of molecular oxygen, with the presence of a triplet state photosensitiser, which is generated by intersystem crossing of the excited singlet state. When comparing the photooxidation of PS20 and PS80 in varying quality grades, we propose that singlet oxygen possesses potential for reacting with unsaturated fatty acids in PS80HP, however, PS20HP itself exhibited no measurable oxidation under the tested conditions. The study's final part delves into the photooxidation behaviour of different PS grades, examining its influence on the integrity of a mAb in the formulation. Finally, we examined the effect of photooxidation on the integrity of monoclonal antibodies. Our findings show that the exposure to visible light in polysorbate-containing mAb solutions at high PS concentrations of 4 mg·ml-1 results in increased monoclonal antibody degradation, highlighting the need for cautious evaluation of the correct PS concentration to stabilise protein therapeutics.

Ferric Oxide Nanomaterials and Plant-Rhizobacteria Symbionts Cogenerate Iron Plaque for Removing Highly Chlorinated Contaminants in Dryland Soils

Rhizosphere iron plaques derived from Fe-based nanomaterials (NMs) are a promising tool for sustainable agriculture. However, the requirement for flooded conditions to generate iron plaque limits the scope of the NM application. In this study, we achieved in situ Fenton oxidation of a highly chlorinated persistent organic pollutant (2,2',4,5,5'-pentachlorobiphenyl, PCB101) through iron plaque mediated by the interaction between α-Fe2O3 NMs and plant-rhizobacteria symbionts under dryland conditions. Mechanistically, the coexistence of α-Fe2O3 NMs and Pseudomonas chlororaphis JD37 stimulated alfalfa roots to secrete acidic and reductive agents as well as H2O2, which together mediated the rhizosphere Fenton reaction and converted α-Fe2O3 NMs into iron plaque rich in Fe(II)-silicate. Further verifications reproduced the Fenton reaction in vitro using α-Fe2O3 NMs and rhizosphere compounds, confirming the critical role of •OH in the oxidative degradation of PCB101. Significant reductions in PCB101 content by 18.6%, 42.9%, and 23.2% were respectively found in stem, leaf, and soil after a 120-d treatment, proving the effectiveness of this NMs-plant-rhizobacteria technique for simultaneously safe crop production and soil remediation. These findings can help expand the potential applications of nanobio interaction and its mediated iron plaque generation for both agricultural practice and soil remediation.

Were Persulfate-Based Advanced Oxidation Processes Really Understood? Basic Concepts, Cognitive Biases, and Experimental Details

Persulfate (PS)-based advanced oxidation processes (AOPs) for pollutant removal have attracted extensive interest, but some controversies about the identification of reactive species were usually observed. This critical review aims to comprehensively introduce basic concepts and rectify cognitive biases and appeals to pay more attention to experimental details in PS-AOPs, so as to accurately explore reaction mechanisms. The review scientifically summarizes the character, generation, and identification of different reactive species. It then highlights the complexities about the analysis of electron paramagnetic resonance, the uncertainties about the use of probes and scavengers, and the necessities about the determination of scavenger concentration. The importance of the choice of buffer solution, operating mode, terminator, and filter membrane is also emphasized. Finally, we discuss current challenges and future perspectives to alleviate the misinterpretations toward reactive species and reaction mechanisms in PS-AOPs.

Synergistic degradation of Tris (2-Chloroethyl) Phosphate (TCEP) by US/Fenton system: Experimental, DFT calculation and toxicity evaluation

Organophosphorus esters (OPEs), exemplified by tris (2-chloroethyl) phosphate (TCEP), find extensive application in diverse industries such as construction materials, textiles, chemical manufacturing, and electronics, consequently resulting in an increased concentration of these compounds in industrial wastewater. The fundamental objective of this investigation was to examine the degradation of TCEP through the implementation of US/Fenton oxidation techniques in a solution. The findings revealed that the US/Fenton system effectively facilitated the degradation of TCEP, with the Chan kinetic model precisely elucidating the degradation process. Under optimized reaction conditions, the degradation efficiency of TCEP reached an impressive 93.18%. However, the presence of common co-existing aqueous substrates such as Cl-, HCO3-, H2PO4-, and HA hindered the degradation process. Bursting tests and electron paramagnetic resonance (EPR) studies affirmed ∙OH oxidation as the principal mechanism underlying TCEP degradation. Detailed degradation pathways for TCEP were established through the utilization of density-functional theory (DFT) calculations and GC/MS tests. Moreover, the ecotoxicological evaluation of TCEP and its intermediates was conducted using the Toxicity Estimation Software Tool (T.E.S.T.).

Direct aqueous photochemistry of methylglyoxal and its effect on sulfate formation

In recent years, among many oxidation pathways studied for atmospheric sulfate formation, the aqueous phase oxidation pathways of H2O2 and organic hydroperoxides (ROOHs) have attracted great scientific attention. Higher concentrations of H2O2 and ubiquitous ROOHs have been observed in atmospheric aqueous phase environments (cloud water, fog droplets, etc.). However, there are still some gaps in the study of their aqueous phase generation and their influences on sulfate formation. In this study, the aqueous phase photochemical reaction of methylglyoxal, a ubiquitous organic substance in the atmospheric aqueous phase, was studied under UV irradiation, and the generation of H2O2 and ROOHs in this system was investigated. It is found for the first time that the aqueous phase photolysis of methylglyoxal not only produces H2O2 but also produces ROOHs, and UV light and O2 are necessary for the formation of H2O2 and ROOHs. Based on the experimental results, the possible mechanism of aqueous phase photochemistry of methylglyoxal and the generation of H2O2 and ROOHs were proposed. The effect of aqueous phase photolysis of methylglyoxal on sulfate formation under different conditions was also investigated. The results show that the aqueous phase photolysis of methylglyoxal significantly promoted SO2 oxidation and sulfate formation, in which SO2 oxidation was realized by the generated H2O2, ROOHs and •OH radicals, and the importance of the formed ROOHs cannot be ignored. These results fill some gaps in the field of aqueous phase H2O2 and ROOHs production, and to a certain extent confirm the important roles of the aqueous phase photolysis of methylglyoxal and the formed H2O2 and ROOHs in the production of sulfate. The study reveals the new sources of H2O2 and ROOHs, and provides a new insight into the heterogeneous aqueous phase oxidation pathways and mechanisms of SO2 in cloud and fog droplets and haze particles.

Mechanisms of arsenic oxidation in the presence of pyrite: An experimental and theoretical study

The mobility and toxicity of arsenic are significantly influenced by the natural minerals. A comprehensive understanding of the interaction between arsenic and minerals is crucial for elucidating the natural behavior of arsenic and advancing arsenic remediation strategies. In this study, the mechanism of As (III) oxidation in the presence of pyrite without light irritation was investigated by experimental and theoretical approaches. Quenching experiment and electron paramagnetic resonance analysis confirm •OH and •O2H is the predominant oxidant of As (III) under acidic and alkaline condition, respectively. Density Functional Theory (DFT) calculations indicate on the pyrite surface, the surface oxygen species is insignificant in As(III) oxidation but crucial for the generation of reactive oxygen species (ROS). In the solution, •OH, •O2H, Fe(IV), and 1O2 are the favored oxidants for As(III), while ROS, 3O2, and Fe(III) possess the capability to convert As(IV) to As(V). The major mechanism of As(III) oxidation in the presence of pyrite without light irritation primarily involves three elementary reactions: (1) •OH facilitating As(III) conversion to As(IV), (2) 3O2 oxidizing As(IV) to As(V) and •O2H, and (3) As(V) and •OH generating in •O2H reacting with As(III). As(IV) emerges as a critical intermediate capable of initiating chain reactions in arsenic oxidation. This study provides atomic-scale insight into the As(III) oxidation in pyrite suspension, which is important for understanding arsenic behavior in analogous oxidation systems.

Green and Low-Cost Alkali-Polyphenol Synergetic Self-Catalysis System Access to Fast Gelation of Self-Healable and Self-Adhesive Conductive Hydrogels for Self-Powered Triboelectric Nanogenerators

Biomass-based hydrogels have attracted great attention in flexible and sustainable self-powered power sources but struggled to fabricate in a green, high-efficiency, and low-cost manner. Herein, a novel and facile alkali-polyphenol synergetic self-catalysis system is originally employed for the fast gelation of self-healable and self-adhesive lignin-based conductive hydrogels, which can be regarded as hydrogel electrodes of flexible triboelectric nanogenerators (TENGs). This synergy self-catalytic system comprises aqueous alkali and polyphenol-containing lignin, in which alkali-activated ammonium persulfate (APS) significantly accelerates the generation of radicals and initiates the polymerization of monomers, while polyphenol acts as a stabilizer to avoid bursting polymerization from inherent radical scavenging ability. Furthermore, multiple hydrogen bonds between lignin biopolymers and polyacrylamide (PAM) chains impart lignin-based hydrogels with exceptional adhesiveness and self-healing properties. Intriguingly, the alkaline conditions not only contribute to the solubility of lignin but also impart superior ionic conductivity of lignin-based hydrogel that is applicable to flexible TENG in self-powered energy-saving stair light strips, which holds great promise for industrial applications of soft electronics.

Enhanced dewaterability of food waste digestate by biochar/potassium ferrate treatments: Performance and mechanisms

The combined process of biochar (BC) and potassium ferrate (PF) offers a fascinating technique for efficient dewatering of digestate. However, the effects of BC/PF treatment on the dewaterability and mechanisms of FWD are still unknown. This study aimed to reveal the impact mechanisms of BC/PF treatment on digestate dewatering performance. Experimental results indicated that BC/PF treatment significantly enhanced the dewaterability of digestate, with the minimum specific resistance to filtration of (1.05 ± 0.02) × 1015 m·kg-1 and water content of 57.52 ± 0.51% being obtained at the concentrations of 0.018 g·g-1 total solid (TS) BC300 and 0.20 g·g-1 TS PF, which were 8.60% and 13.59% lower than PF treatment, respectively. BC/PF treatment proficiently reduced the fractal dimension, bound water content, apparent viscosity, and gel-like network structure strength of digestate, as well as increased the floc size and zeta potential of digestate. BC/PF treatment promoted the conversion of extracellular polymeric substances (EPS) fractions from inner EPS to soluble EPS, increased the fluorescence intensity of the dissolved compounds, and enhanced the hydrophobicity of proteins. Mechanisms investigations showed that BC/PF enhanced dewatering through non-reactive oxygen species pathways, i.e., via strong oxidative intermediate irons species Fe(V)/Fe(IV). BC/PF treatment enhanced the solubilization of nutrients, the inactivation of fecal coliforms, and the mitigation of heavy metal toxicity. The results suggested that BC/PF treatment is an effective digestate dewatering technology which can provide technological supports to the closed-loop treatment of FWD.

Efficient Photosynthesis of Hydrogen Peroxide by Cyano-Containing Covalent Organic Frameworks from Water, Air and Sunlight

The insufficient exciton (e- -h+ pair) separation/transfer and sluggish two-electron water oxidation are two main factors limiting the H2 O2 photosynthetic efficiency of covalent organic frameworks (COFs) photocatalysts. Herein, we present an alternative strategy to simultaneously facilitate exciton separation/transfer and reduce the energy barrier of two-electron water oxidation in COFs via a dicyano functionalization. The in situ characterization and theoretical calculations reveal that the dicyano functionalization improves the amount of charge transfer channels between donor and acceptor units from two in COF-0CN without cyano functionalization to three in COF-1CN with mono-cyano functionalization and four in COF-2CN with dicyano functionalization, leading to the highest separation/transfer efficiency in COF-2CN. More importantly, the dicyano group activates the neighbouring C atom to produce the key *OH intermediate for effectively reducing the energy barrier of rate-determining two-electron water oxidation in H2 O2 photosynthesis. The simultaneously enhanced exciton separation/transfer and two-electron water oxidation in COF-2CN result in high H2 O2 yield (1601 μmol g-1  h-1 ) from water and oxygen without using sacrificial reagent under visible-light irradiation. COF-2CN can effectively yield H2 O2 in water with wide pH range, in different real water samples, in scaled-up reactor under natural sunlight irradiation, and in continuous-flow reactor for consecutively producing H2 O2 solution for water decontamination.

Integrating g-C3N4 nanosheets with MOF-derived porous CoFe2O4 to form an S-scheme heterojunction for efficient pollutant degradation via the synergy of photocatalysis and peroxymonosulfate activation

When confronted with wastewater that is characterized by complex composition, stable molecular structure, and high concentration, relying solely on photocatalytic technology proves inadequate in achieving satisfactory degradation results. Therefore, the integration of other highly efficient degradation techniques has emerged as a viable approach to address this challenge. Herein, a novel strategy was employed whereby the exfoliated g-C3N4 nanosheets (CNs) with exceptional photocatalytic performance, were intimately combined with porous rod-shaped cobalt ferrite (CFO) through a co-calcination process to form the composite CFO/CNs, which exhibited remarkable efficacy in the degradation of various organic pollutants through the combination of photocatalysis and Fenton-like process synergistically, exemplified by the representative case of tetracycline hydrochloride (TCH, 200 mL, 50 mg/L). Specifically, under 1 mM of peroxymonosulfate (PMS) and illumination conditions, 50 mg of 1CFO/9CNs achieved a TCH removal ratio of ∼90% after 60 min of treatment. Furthermore, this work comprehensively investigated the influence of various factors, including catalyst and PMS dosages, solution pH, and the presence of anions and humate, on the degradation efficiency of pollutants. Besides, quenching experiments and EPR tests confirmed the establishment of an S-scheme heterojunction between CNs and CFO, which facilitated the effective spatial separation of photoexcited charge carriers and preserved the potent redox potential of photogenerated electrons and holes. This work offers a valuable reference for the integration of photocatalysis with the PMS-based Fenton-like process.

Degradation of iopamidol in the permanganate/sulfite process: Evolution of iodine species and effect on the subsequent formation of disinfection by-products

Permanganate/sulfite (Mn(VII)/S(IV)) process is a promising pre-oxidation technology for sequestering the emerging organic contaminants in drinking water treatment plant. Iopamidol (IPM), a representative of iodinated X-ray contrast media, has been widely detected in water sources and has the risk of forming iodinated disinfection byproducts (I-DBPs) in water treatment system. In this study, we investigated the evolution of iodine species during the IPM degradation by the Mn(VII)/S(IV) process and its effect on the subsequent formation of I-DBPs during chlorination at pH 7.0 and 8.0. IPM could be effectively degraded in the Mn(VII)/S(IV) process at environmentally relevant pH (pH 7.0 and 8.0). The results of quenching and competitive oxidation kinetic experiments revealed that SO4·- was the major reactive oxidizing species contributing to the degradation of IPM whereas the contributions of HO· and reactive manganese species were negligible in the Mn(VII)/S(IV) process. I- and IO3- were generated while no HOI was detected during the degradation of IPM in the Mn(VII)/S(IV) process. The effects of IPM oxidation by Mn(VII)/S(IV) on the subsequent formation of chlorinated disinfection by-products (Cl-DBPs) during chlorination were related to the category of Cl-DBPs. The pre-oxidation of IPM by Mn(VII)/S(IV) resulted in the generation of I-DBPs during the disinfection process although no I-DBPs were detected if no pre-oxidation was applied. The finding of this study suggested that attention should be paid to the toxicity of DBPs when water containing iodinated organic contaminants is treated by Mn(VII)/S(IV) process or other pre-oxidation technologies.

Hydroxyl radical production by abiotic oxidation of pyrite under estuarine conditions: The effects of aging, seawater anions and illumination

Pyrite is widely distributed in estuarine sediments as an inexpensive natural Fenton-like reagent, however, the mechanism on the hydroxyl radical (HO·) production by pyrite under estuarine environmental conditions is still poorly understood. The batch experiments were performed to investigate the effects of estuarine conditions including aging (in air, in water), seawater anions (Cl-, Br- and HCO3-) and light on the HO· production by pyrite oxidation. The one-electron transfer dominated the process from O2 to HO· induced by oxidation of pyrite. The Fe (oxyhydr)oxide coatings on the surface of pyrite aged in air and water consumed hydrogen peroxide while mediating the electron transfer, and the combined effect of the two resulted in a suppression of HO· production in the early stage of aging and a promotion of HO· production in the later stage of aging. Corrosion of the surface oxide layers by aggressive anions was the main reason for the inhibition of HO· production by Cl- and Br-, and the generation of Cl· and Br· may also play a role in the scavenging of HO·. HCO3- increased the average rate of HO· production through surface-CO2 complexes formed by adsorption on the surface of pyrite. The significant enhancement of HO· production under light was attributed to the formation of photoelectrons induced by photochemical reactions on pyrite and its surface oxide layers. These findings provide new insights into the environmental chemical behavior of pyrite in the estuary and enrich the understanding of natural remediation of estuarine environments.

Aerobic Oxidation of 5-Hydroxymethylfurfural (HMF) in Aqueous Medium over Fe-Doped-Poly(heptazine imide) Photocatalysts: Unveiling the Bad Role of Hydroxyl Radical Generation on the Catalytic Performance

5-hydroxymethylfurfural (HMF) oxidation in aqueous media using visible photocatalysis is a green and sustainable route for the valorization of lignocellulosic biomass derivatives. Several semiconductors have already been applied for this purpose; however, the use of Poly(heptazine imides), which has high crystallinity and a special cation exchange property that allows the replacement of the cation held between the layers of C3N4 structure by transition metal ions (TM), remains scarce. In this study, PHI(Na) was synthesized using a melamine/NaCl method and used as precursor to prepare metal (Fe, Co, Ni, or Cu)-doped PHI catalysts. The catalysts were tested for selective oxidation of HMF to 2,5-diformylfuran (DFF) in water and O2 atmosphere under blue LED radiation. The catalytic results revealed that the 0.1 wt% PHI(Fe) catalyst is the most efficient photocatalyst while higher Fe loading (1 and 2 wt%) favors the formation of Fe3+ clusters, which are responsible for the drop in HMF oxidation. Moreover, the 0.1 wt% PHI(Fe) photocatalyst has strong oxidative power due to its efficiency in H2O2 production, thus boosting the generation of nonselective hydroxyl radicals (●OH) via different pathways that can destroy HMF. We found that using 50 mM, the highest DFF production rate (393 μmol·h-1·g-1) was obtained in an aqueous medium under visible light radiation.

Origin of unique hyper-Raman signals of trifluoroethanol

We report the hyper-Raman (HR) spectrum of trifluoroethanol, excited with 532 nm light, in an aqueous solution at basic pH. The HR spectrum exhibits a distinct spectral pattern that diverges entirely from the infrared and Raman spectra of trifluoroethanol. This observed unique HR signal was attributed to the products of photoinduced radical reactions in the aqueous solution. This result exemplifies the exceptional capabilities of HR spectroscopy based on resonance conditions.

Advances in Polyoxometalates as Electron Mediators for Photocatalytic Dye Degradation

The increasing concerns over the environment and the growing demand for sustainable water treatment technologies have sparked substantial interest in the field of photocatalytic dye removal. Polyoxometalates (POMs), known for their intricate metal-oxygen anion clusters, have received considerable attention due to their versatile structures, compositions, and efficient facilitation of photo-induced electron transfers. This paper provides an overview of the ongoing research progress in the realm of photocatalytic dye degradation utilizing POMs and their derivatives. The details encompass the compositions of catalysts, catalytic efficacy, and light absorption propensities, and the photocatalytic mechanisms inherent to POM-based materials for dye degradation are exhaustively expounded upon. This review not only contributes to a better understanding of the potential of POM-based materials in photocatalytic dye degradation, but also presents the advancements and future prospects in this domain of environmental remediation.

Validation of quenching effectiveness and pollutant degradation ability of singlet oxygen through model reaction system

Quenching method is widely used to assess the contribution of specified reactive species through the probe inhibition efficiency (IE) caused by adding excessive quencher. However, for reactive species with weak ability such as singlet oxygen (1O2), the quenching results are prone to ambiguity. In this study, an 1O2 system using furfuryl alcohol (FFA) as a probe was successfully constructed by methylene-blue-N vis-photosensitization, to discuss the quenching, interference elimination and pollutant degradation ability of 1O2. Inhibition of FFA transformation caused by both quenching and interrupting of 1O2 production was found. The quenching is affected by quencher dosage and ability, which depends on the second-order-rate constant (k). A high k means a strong ability, and less dosage is required to achieve the same IE. Comparison between the calculated ratio of reactive species consumed by quencher and experimental IE helps to judge the interruption of 1O2 production. None of the organic-solvents (methanol, ethanol, iso-propanol, n-butanol, iso-butanol, tert-butanol, tetrahydrofuran, acetonitrile, acetone and chloroform) scavenged 1O2, which would be used as screening-agent for other reactive species (e.g., hydroxyl radicals) that would interrupt 1O2 contribution assessment. Besides, 1O2 was powerless to degrade most selected pollutants. These results encourage proper use of quenchers and better experimental design.

Clarification of the role of singlet oxygen for pollutant abatement during persulfate-based advanced oxidation processes: Co3O4@CNTs activated peroxymonosulfate as an example

Singlet oxygen (1O2) has often been identified by the popularly used quenching method as a more important reactive species (RS) than sulfate radicals (SO4•-) and hydroxyl radicals (•OH) for pollutant abatement during persulfate-based advanced oxidation processes (PS-AOPs), especially those activated by carbon-based catalysts. However, latest studies have demonstrated that the quenching method actually can often mislead the interpretations of the role of RS for pollutant abatement during AOPs due to various confounding effects caused by adding high-concentration quenchers in the system. To clarify the role of 1O2 in PS-AOPs, this study developed a probe compound-based experimental and kinetic model to quantify the concentrations and exposures of 1O2, SO4•-, and •OH, as well as their relative contributions to pollutant abatement during a cobalt oxide incorporated carbon nanotubes activated peroxymonosulfate (Co3O4@CNTs/PMS) process. Results show that during the Co3O4@CNTs/PMS process, the exposures and transient concentrations of 1O2 were about 19.6 and 41.3 times higher than those of SO4•- and •OH, respectively. However, the relative contribution of 1O2 to the abatement of most pollutants tested in this study (e.g., sulfisoxazole, sulfamethoxyprazine, trimethoprim, and metoprolol) is generally negligible (f1O2 ≤ 8%) compared to that of SO4•- and •OH ( [Formula: see text]  = 15%-98% and f•OH = 2%-78%) because of the significantly lower reactivity of 1O2 with these compounds than that of SO4•- and •OH. Reasons for misidentifying 1O2 as the dominant RS for pollutant abatement by the quenching method were then analyzed based on reaction kinetics principles. The results of this study highlight that while 1O2 can be generated in significant amounts and be present at higher concentrations than SO4•- and •OH in PS-AOP systems, 1O2 is unlikely to be the dominant RS for the abatement of most pollutants during the PS-AOPs because of its weak and selective oxidation capacity, and caution should be taken when using the quenching method to evaluate the role of RS for pollutant abatement by the PS-AOPs.

A review of factors affecting the formation and roles of primary and secondary reactive species in UV254-based advanced treatment processes

The presence of organic micropollutants (OMPs) in water has been threatening human health and aquatic ecosystems worldwide. Ultraviolet-based advanced treatment processes (UV-ATPs) are one of the most effective and promising technologies to transform OMPs in water; therefore, an increasing number of emerging UV-ATPs are proposed. However, appropriate selection of UV-ATPs for practical applications is challenging because each UV-ATP generates different types and concentrations of reactive species (RSs) that may not be sufficient to degrade specific types of OMPs. Furthermore, the concentrations and types of RSs are highly influenced by anions and dissolved organic matter (DOM) coexisting in real waters, making systematic understandings of their interfering mechanisms difficult. To identify and address the knowledge gaps, this review provides a comparison of the generations and variations of various types of RSs in different UV-ATPs. These analyses not only prove the importance of water matrices on formation and consumption of primary and secondary RSs under different conditions, but also highlight the non-negligible roles of optical properties and reactivities of DOM and anions. For example, different UV-ATPs may be applicable to different target OMPs under different conditions; and the concentrations and roles of secondary RSs may outperform those of primary RSs in OMP degradation for real applications. With continuous progress and outstanding achievements in the UV-ATPs, it is hoped that the findings and conclusions of this review could facilitate further research and application of UV-ATPs.

Linkage Microenvironment of Azoles-Related Covalent Organic Frameworks Precisely Regulates Photocatalytic Generation of Hydrogen Peroxide

Artificial H2 O2 photosynthesis by covalent organic frameworks (COFs) photocatalysts is promising for wastewater treatment. The effect of linkage chemistry of COFs as functional basis to photoelectrochemical properties and photocatalysis remains a significant challenge. In this study, three kinds of azoles-linked COFs including thiazole-linked TZ-COF, oxazole-linked OZ-COF and imidazole-linked IZ-COF were successfully synthesized. More accessible channels of charge transfer were constructed in TZ-COF via the donor-π-acceptor structure between thiazole linkage and pyrene linker, leading to efficient suppression of photoexcited charge recombination. Density functional theory calculations support the experimental studies, demonstrating that the thiazole linkage is more favorable for the formation of *O2 intermediate in H2 O2 production than that of the oxazole and imidazole linkages. The real active sites in COFs located at the benzene ring fragment between pyrene unit and azole linkage.

Dual donor-acceptor covalent organic frameworks for hydrogen peroxide photosynthesis

Constructing photocatalytically active and stable covalent organic frameworks containing both oxidative and reductive reaction centers remain a challenge. In this study, benzotrithiophene-based covalent organic frameworks with spatially separated redox centers are rationally designed for the photocatalytic production of hydrogen peroxide from water and oxygen without sacrificial agents. The triazine-containing framework demonstrates high selectivity for H2O2 photogeneration, with a yield rate of 2111 μM h-1 (21.11 μmol h-1 and 1407 μmol g-1 h-1) and a solar-to-chemical conversion efficiency of 0.296%. Codirectional charge transfer and large energetic differences between linkages and linkers are verified in the double donor-acceptor structures of periodic frameworks. The active sites are mainly concentrated on the electron-acceptor fragments near the imine bond, which regulate the electron distribution of adjacent carbon atoms to optimally reduce the Gibbs free energy of O2* and OOH* intermediates during the formation of H2O2.

Efficient Degradation of Intracellular Antibiotic Resistance Genes by Photosensitized Erythrosine-Produced 1O2

Intracellular antibiotic resistance genes (iARGs) constitute the important part of wastewater ARGs and need to be efficiently removed. However, due to the dual protection of intracellular DNA by bacterial membranes and the cytoplasm, present disinfection technologies are largely inefficient in iARG degradation. Herein, we for the first time found that erythrosine (ERY, an edible dye) could efficiently degrade iARGs by producing abundant 1O2 under visible light. Seven log antibiotic-resistant bacteria were inactivated within only 1.5 min, and 6 log iARGs were completely degraded within 40 min by photosensitized ERY (5.0 mg/L). A linear relationship was established between ARG degradation rate constants and 1O2 concentrations in the ERY photosensitizing system. Surprisingly, a 3.2-fold faster degradation of iARGs than extracellular ARGs was observed, which was attributed to the unique indirect oxidation of iARGs induced by 1O2. Furthermore, ERY photosensitizing was effective for iARG degradation in real wastewater and other photosensitizers (including Rose Bengal and Phloxine B) of high 1O2 yields could also achieve efficient iARG degradation. The findings increase our knowledge of the iARG degradation preference by 1O2 and provide a new strategy of developing technologies with high 1O2 yield, like ERY photosensitizing, for efficient iARG removal.

Sodium Alginate-CuS Nanostructures Synthesized at the Gel-Liquid Interface: An Efficient Photocatalyst for Redox Reaction and Water Remediation

The use of visible light to propel chemical reactions is an exciting area of study that is crucial in the current socioeconomic environment. However, various photocatalysts have been developed to harness visible light, which consume high energy during synthesis. Thus, synthesizing photocatalysts at gel-liquid interfaces in ambient conditions is of scientific importance. Herein, we report an environmentally benign sodium alginate gel being used as a biopolymer template to synthesize copper sulfide (CuS) nanostructures at the gel-liquid interface. The driving force for the synthesis of CuS nanostructures is varied by changing the pH of the reaction medium (i.e., pH 7.4, 10, and 13) to tailor the morphology of CuS nanostructures. The CuS nanoflakes obtained at pH 7.4 transform into nanocubes when the pH is raised to 10, and the nanostructures deform at the pH of 13. Fourier transform infrared spectroscopy (FTIR) confirms all the characteristic stretching of sodium alginate, whereas the CuS nanostructures are crystallized in a hexagonal crystal system, as revealed by the powder X-ray diffraction analysis. The high-resolution X-ray photoelectron spectroscopy (XPS) spectra show the +2 and -2 oxidation states of copper (Cu) and sulfur (S) ions, respectively. The CuS nanoflakes physisorbed a higher concentration of greenhouse CO₂ gas. Owing to a lower band gap of CuS nanoflakes synthesized at a pH of 7.4, compared to other CuS nanostructures prepared at pH 10 and 13, CuS photocatalytically degrades 95% of crystal violet and 98% of methylene blue aqueous dye solutions in 60 and 90 min, respectively, under blue light illumination. Additionally, sodium alginate-copper sulfide (SA-CuS) nanostructures synthesized at a pH of 7.4 demonstrate excellent performance in photoredox reactions to convert ferricyanide to ferrocyanide. The current research opens the door to developing new photocatalytic pathways for a wide range of photochemical reactions involving nanoparticle-impregnated alginate composites prepared on gel interfaces.

Non-thermal plasma activated peroxide and percarbonate for tetracycline and oxytetracycline degradation: Synergistic performance, degradation pathways, and toxicity evaluation

Tetracycline (TC) and Oxytetracycline (OTC) are common antibiotics increasingly detected in the environment, posing a potential risk to human and aquatic lives. Although conventional methods such as adsorption and photocatalysis are used for the degradation of TC and OTC, they are inefficient in removal efficiency, energy yield, and toxic byproduct generation. Herein, a falling-film dielectric barrier discharge (DBD) reactor coupled with environmentally friendly oxidants (hydrogen peroxide (HPO), sodium percarbonate (SPC), and HPO + SPC) was applied, and the treatment efficiency of TC and OTC was investigated. Experimental results showed that moderate addition of the HPO and SPC exhibited a synergistic effect (SF > 2), significantly improving the antibiotic removal ratio, total organic removal ratio (TOC), and energy yield by more than 50%, 52%, and 180%, respectively. After 10 min of DBD treatment, the introduction of 0.2 mM SPC led to a 100% antibiotic removal ratio and a TOC removal of 53.4% and 61.2% for 200 mg/L TC and 200 mg/L OTC, respectively. Also, 1 mM HPO dosage led to 100% antibiotic removal ratios after 10 min of DBD treatment and a TOC removal of 62.4% and 71.9% for 200 mg/L TC and 200 mg/L OTC, respectively. However, the DBD + HPO + SPC treatment method had a detrimental effect on the performance of the DBD reactor. After 10 min of DBD plasma discharge, the removal ratios for TC and OTC were 80.8% and 84.1%, respectively, when 0.5 mM HPO +0.5 mM SPC was added. Moreover, principal component and hierarchical cluster analysis confirmed the differences between the treatment methods. Furthermore, the concentration of oxidant-induced in-situ generated ozone and hydrogen peroxide were quantitatively determined, and their indispensable roles during the degradation process were established via radical scavenger tests. Finally, the synergetic antibiotic degradation mechanisms and pathways were proposed, and the toxicities of the intermediate byproducts were evaluated.

Stability enhancing of perovskite LaCoO3 by compositing with oxygen doped MoS2 in Fenton-like reactions

Perovskite materials are reported to be effective in peroxymonosulfate (PMS) based Fenton-like reactions, the leaching rates of chalcogenide materials in perovskite materials are however serious, thus leading to bad performance in long-term stability. In this study, an O-doped MoS₂ is synthesized to composite with LaCoO₃, and the high catalytic activity of LaCoO₃ is well preserved with greatly decreased Co leaching. During the BPA degradation with PMS as oxidant, ∼100% degradation can be achieved in 20 min and this degradation efficiency can be maintained for ∼45 h in a simulated fixed bed reactor, which is almost 3 times longer than the pure LaCoO₃. With the compositing of O-doped MoS₂, the leached Co was greatly decreased and the dominated reactive oxidation species (ROS) transformed from SO₄^•- into O₂^•- with longer lifespan, thus resulting in the better stability. This study could promote the application of perovskite materials in the real industrial wastewater treatment.

Efficiently photocatalysis activation of peroxydisulfate by Fe-doped g-C3N5 for pharmaceuticals and personal care products degradation

Peroxydisulfate (PDS) based advanced oxidation processes (AOPs) are widely used for the degradation of pharmaceutical and personal care products (PPCP) in wastewater treatment. In this study, a Fe-doped g-C₃N₅ (Fe@g-C₃N₅) was synthesized as a photocatalyst for catalyzing the PDS-based AOPs to degrade tetracycline hydrochloride (TH) at pH 3 and Naproxen (NPX) at pH 7. The photocatalytic performance of Fe@g-C₃N₅ was 19% and 67% higher than g-C₃N₅ and g-C₃N₄ for degradation of TH at pH 3, respectively, while it was 21% and 35% at pH 7. The Fe:N ratio in Fe@g-C₃N₅, was calculated as 1:3.79, indicating that the doped Fe atom formed a FeN₄ structure with an adjacent two-layer graphite structure of g-C₃N₅, which improved the charge separation capacity of g-C₃N₅ and act as a new reaction center that can efficiently combine and catalyze the PDS to radicals. Although the intrinsic photo-degradation performance is weak, the photocatalytic performance of Fe@g-C₃N₅ has great room for the improvement and application in wastewater treatment.

Maneuvering the Peroxidase-Like Activity of Palladium-Based Nanozymes by Alloying with Oxophilic Bismuth for Biosensing

Engineering the catalytic performance of nanozymes is of vital importance for their broad applications in biological analysis, cancer treatment, and environmental management. Herein, a strategy to boost the peroxidase-like activity of Pd-based nanozymes with oxophilic metallic bismuth (Bi) is demonstrated, which is based on the incorporation of oxophilic Bi in the Pd-based alloy nanocrystals (NCs). To synthesize PdBi alloy NCs, a seed-mediated method is employed with the assistance of underpotential deposition (UPD) of Bi on Pd. The strong interaction of Bi atoms with Pd surfaces favors the formation of alloy structures with controllable shapes and excellent monodispersity. More importantly, the PdBi NCs show excellent peroxidase-like activities compared with pristine Pd NCs. The structure-function correlations for the PdBi nanozymes are elucidated, and an indirect colorimetric method based on cascade reactions to determine alkaline phosphatase (ALP) is established. This method has good linear range, low detection limit, excellent selectivity, and anti-interference. Collectively, this work not only provides new insights for the design of high-efficiency nanozymes, expands the colorimetric sensing platform based on enzyme cascade reactions, but also represents a new example for UPD-directed synthesis of alloy NCs.

Bicarbonate enhanced heterogeneous activation of peroxymonosulfate by copper ferrite nanoparticles for the efficient degradation of refractory organic contaminants in water

Nowadays, the treatment of residual refractory organic contaminants (ROCs) is a huge challenge for environmental remediation. In this study, a potential process is provided by copper ferrite catalyst (CuFe₂O₄) activated peroxymonosulfate (PMS, HSO₅^-) in the bicarbonate (HCO₃^-) enhanced system for efficient removal of Acid Orange 7 (AO7), 2,4-dichlorophenol, phenol and methyl orange (MO) in water. The impact of key reaction parameters, water quality components, main reactive oxygen species (ROS), probable degradation mechanism, rational degradation pathways and catalyst stability were systematically investigated. A 95.0% AO7 (C₀ = 100 mg L^-1) removal was achieved at initial pH (pH₀) of 5.9 ± 0.1 (natural pH), CuFe₂O₄ dosage of 0.15 g L^-1, PMS concentration of 0.98 mM, HCO₃^- concentration of 2 mM, and reaction time of 30 min. Both sulfate radical (SO₄^-•) and hydroxyl radical (^•OH) on the surface of catalyst were proved as the predominant radical species through radical quenching experiments and electron paramagnetic resonance (EPR) analysis. The buffer nature of HCO₃^- was partially contributed for the enhanced degradation of AO7 under CuFe₂O₄/PMS/HCO₃^- system. Importantly, according to ¹³C nuclear magnetic resonance (NMR) and EPR analysis, the positive effect of bicarbonate may be mainly attributed to the formation of peroxymonocarbonate (HCO₄^-), which may enhance the generation of ^•OH. The magnetic CuFe₂O₄ particles can be well recycled and the leaching concentration of Cu was acceptable (<1 mg L^-1). Considering the widespread presence of bicarbonate in water environment, this work may provide a safe, efficient, and sustainable technique for the elimination of ROCs from practical complex wastewater.

Enhanced generation of reactive oxygen species by pyrite for As(III) oxidation and immobilization: The vital role of Fe(II)

The migration and conversion of arsenic in the environment usually accompany by the redox of iron-bearing minerals. For instance, the oxidation of pyrite can generate reactive oxygen species (ROS) affecting the species of arsenic, but the types and roles of ROS have been unclear. This paper demonstrated the vital role of Fe(II) in the pyrite for the formation of ROS. Results showed that exogenous addition of Fe(II) significantly enhanced the removal rate of As(III) by pyrite. 2,2'-bipyridine (BPY) decreased the oxidation of As(III) by complexing with Fe²⁺ in solution, whilst EDTA enhanced the oxidation of As(III) by boosting the autoxidation of Fe²⁺. In addition, neutral pH is superior for the oxidation of As(III) and removal of total arsenic. Importantly, Methanol, SOD enzyme and PMOS inhibited 54%, 28% and 17.5% of As(III) oxidation, respectively, which indicated O₂^•- and •OH were the main contributors to As(III) oxidation, and Fe(IV) contributed a small part of As(III) oxidation. The content of As(V) in the FeS₂-Fe²⁺-As(III) system was higher than that in the FeS₂-As(III) system, further confirming the vital role of Fe(II) for As(III) oxidation. Lepidocrocite was produced in a single Fe²⁺ system, which was not detected in the FeS₂-As(III) system. Thus, the presence of mineral surfaces changed the oxidation products of Fe²⁺ and accelerated the oxidation and immobilization of As(III). FA (Fulvic Acid) and HA (Humic Acid) accelerated the oxidation of As(III), but the oxidation of As(III) by pyrite was inhibited to a certain extent, with increasing phenolic hydroxyl groups in phenolic acid. Our findings provide new insight into the oxidative species in the pyrite-Fe(II) system and will help guide the remediation of arsenic pollution in complex environmental systems.

Removal of Pharmaceuticals and Personal Care Products (PPCPs) by Free Radicals in Advanced Oxidation Processes

As emerging pollutants, pharmaceutical and personal care products (PPCPs) have received extensive attention due to their high detection frequency (with concentrations ranging from ng/L to μg/L) and potential risk to aqueous environments and human health. Advanced oxidation processes (AOPs) are effective techniques for the removal of PPCPs from water environments. In AOPs, different types of free radicals (HO·, SO₄·^-, O₂·^-, etc.) are generated to decompose PPCPs into non-toxic and small-molecule compounds, finally leading to the decomposition of PPCPs. This review systematically summarizes the features of various AOPs and the removal of PPCPs by different free radicals. The operation conditions and comprehensive performance of different types of free radicals are summarized, and the reaction mechanisms are further revealed. This review will provide a quick understanding of AOPs for later researchers.

The role of trace N-Oxyl compounds as redox mediator in enhancing antiviral ribavirin elimination in UV/Chlorine process

Ribavirin (RBV) is an antiviral drug used for treating COVID-19 infection. Its release into natural waters would threaten the health of aquatic ecosystem. This study reports an effective approach to degrade RBV by the trace N-oxyl compounds (2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) and N-Hydroxyphthalimide (NHPI)) enhanced UV activated free chlorine (UV/Chlorine) process. The results indicated that TEMPO and NHPI at low concentrations (0.1 μM and 1 μM, respectively) could strongly enhance RBV degradation in both deionized water with different pHs and practical surface water. The enhancement was verified to be attributed to the transformation of TEMPO and NHPI into their reactive forms (i.e., TEMPO⁺ and PINO), which generations deeply relied on radicals. The two N-oxyl compounds inhibit ClO• yield by hindering the reaction of free chlorine vs. HO• and Cl•. The analyses on acute toxicities of RBV degradation products indicate that UV/Chlorine/N-oxyl compounds process can detoxify RBV more efficiently than UV/Chlorine process.

Enhanced oxidation of organic contaminants by Mn(VII) in water

Studies that promote chemical oxidation by permanganate (MnO₄^-; Mn(VII)) as a viable technology for water treatment and environmental purification have been quickly accumulating over the past decades. Various methods to activate Mn(VII) have been proposed and their efficacy in destructing a wide range of emerging organic contaminants has been demonstrated. This article aims to present a state-of-art review on the development of Mn(VII) activation methods, including photoactivation, electrical activation, the addition of redox mediators, carbonaceous materials, and other chemical agents, with a particular focus on the potential activation mechanism and critical influencing factors. Different reaction mechanisms are involved in activated Mn(VII) oxidation processes, including the generation of reactive intermediates derived from Mn(VII) (e.g., Mn(III), Mn(V), and Mn(VI)) or activators (e.g., intermediates of redox mediators and Ru catalysts), reactive oxygen species (ROS) (e.g., •OH, O₂^•-, and ¹O₂), as well as electron transfer from organics to Mn(VII) via catalysts as the electron mediator. Except •OH that is generated as one of co-oxidants in UV/Mn(VII) process, other reactive species are relatively mild oxidants, which are more selective toward organic substrates and highly tolerant toward various water matrices (e.g., inorganic ions and natural organic matter) compared to strongly oxidizing radical species. Therefore, activated Mn(VII) oxidation processes show a good prospect for efficient removal of target contaminants in natural and complex environmental matrices. However, there are some disputes about the dominant reactive species generated in these processes, and their identification methods may be not appropriate, causing serious confusion in the mechanistic understanding. So, further efforts are still needed to fill the knowledge gap and also to address the application challenges of these technologies.

Romo AI, Pudar S, Putnam ST, Bustos E, Rodríguez-López J. Real-Time Detection of Hydroxyl Radical Generated at Operating Electrodes via Redox-Active Adduct Formation Using Scanning Electrochemical Microscopy

The hydroxyl radical (•OH) is one of the most attractive reactive oxygen species due to its high oxidation power and its clean (photo)(electro)generation from water, leaving no residues and creating new prospects for efficient wastewater treatment and electrosynthesis. Unfortunately, in situ detection of •OH is challenging due to its short lifetime (few ns). Using lifetime-extending spin traps, such as 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to generate the [DMPO-OH]• adduct in combination with electron spin resonance (ESR), allows unambiguous determination of its presence in solution. However, this method is cumbersome and lacks the necessary sensitivity and versatility to explore and quantify •OH generation dynamics at electrode surfaces in real time. Here, we identify that [DMPO-OH]• is redox-active with E0 = 0.85 V vs Ag|AgCl and can be conveniently detected on Au and C ultramicroelectrodes. Using scanning electrochemical microscopy (SECM), a four-electrode technique capable of collecting the freshly generated [DMPO-OH]• from near the electrode surface, we detected its generation in real time from operating electrodes. We also generated images of [DMPO-OH]• production and estimated and compared its generation efficiency at various electrodes (boron-doped diamond, tin oxide, titanium foil, glassy carbon, platinum, and lead oxide). Density functional calculations, ESR measurements, and bulk calibration using the Fenton reaction helped us unambiguously identify [DMPO-OH]• as the source of redox activity. We hope these findings will encourage the rapid, inexpensive, and quantitative detection of •OH for conducting informed explorations of its role in mediated oxidation processes at electrode surfaces for energy, environmental, and synthetic applications.

Removal of tetracycline by biochar-supported biogenetic sulfidated zero valent iron: Kinetics, pathways and mechanism

The application of zero-valent iron (ZVI) is limited due to passivation and agglomeration. Therefore, biochar loading (MB) and biogenetic sulfidation via sulfate-reducing bacteria (SRB) were used to improve the reactivity of ZVI (BS-ZVI@MB) towards tetracycline (TC) degradation. Biochar provided more attachment sites for ZVI and SRB, thus alleviating the agglomeration. Additionally, quinone groups on biochar enhanced the electrons transfer through the measurement of electron donating/accepting capacities, and biogenetic sulfidation could inhibit the surface passivation of ZVI. Fe(Ⅱ/Ⅲ) produced after the addition of BS-ZVI@MB could complex with the A ring in TC to form Fe(Ⅱ/Ⅲ)-TC, which brought the oxidation of TC by complexed Fe(Ⅲ). Reactive oxygen species (ROS)(primarily •OH) were generated during the oxidation of Fe(Ⅱ), so as to promote the TC degradation. Extracellular polymeric substances (EPS) secreted from SRB had a slight quenching effect on ROS. Meanwhile, EPS formed a protective layer with Fe(Ⅱ/Ⅲ) on BS-ZVI@MB, reducing its reactivity with TC. Overall, this study showed an efficient modification technology of ZVI by biogenetic sulfidation and biochar loading for TC degradation.

Accurate identification of radicals by in-situ electron paramagnetic resonance in ultraviolet-based homogenous advanced oxidation processes

Accurate identification of radicals in advanced oxidation processes (AOPs) is important to study the mechanisms on radical production and subsequent oxidation-reduction reaction. The commonly applied radical quenching experiments cannot provide direct evidences on generation and evolution of radicals in AOPs, while electron paramagnetic resonance (EPR) is a cutting-edge technology to identify radicals based on spectral characteristics. However, the complexity of EPR spectrum brings uncertainty and inconsistency to radical identification and mechanism clarification. This work presented a comprehensive study on identification of radicals by in-situ EPR analysis in four typical UV-based homogenous AOPs, including UV/H₂O₂, UV/peroxodisulfate (and peroxymonosulfate), UV/peracetic acid and UV/IO₄^- systems. Radical formation mechanism was also clarified based on EPR results. A reliable EPR method using organic solvents was proposed to identify alkoxy and alkyl radicals (CH₃C(=O)OO·, CH₃C(=O)O· and ·CH₃) in UV/PAA system. Two activation pathways for radical production were proposed in UV/IO₄^- system, in which the produced IO₃·, IO₄·, ·OH and hydrated electron were precisely detected. It is interesting that addition of specific organic solvents can effectively identify oxygen-center and carbon-center radicals. A key parameter in EPR spectrum for 5,5-dimethyl-1-pyrroline N-oxide (DMPO) spin adduct, A_H, is ranked as: ·CH₃ (23 G) >·OH (15 G) >IO₃· (12.9 G) >O₂·^- (11 G) ≥·OOH (9-11 G) ≥IO₄· (9-10 G) ≥SO₄·^- (9-10 G) >CH₃C(=O)OO· (8.5 G) > CH₃C(=O)O· (7.5 G). This study will give a systematic method on identification of radicals in AOPs, and shed light on the insightful understanding of radical production mechanism.

Enhanced degradation of dimethyl phthalate in wastewater via heterogeneous catalytic ozonation process: performances and mechanisms

Ozonation process is a promising yet challenging method for the removal of refractory organic matter due to the sluggish reaction for generating hydroxyl radical (˙OH) at a neutral pH condition. Herein, an efficient heterogeneous catalytic ozonation system using CeO₂/Al₂O₃ catalyst was developed to remove dimethyl phthalate (DMP) from wastewater. Under a neutral condition of pH = 6, this system achieved almost 100% DMP removal within 15 min at an optimized catalyst dosage of 30 g L⁻¹ and the ozone flow rate of 22.5 mg min⁻¹. Moreover, the catalytic ozonation system exhibited a stable degradation performance of DMP in a wider pH range (pH = 5–10). The results of electron paramagnetic resonance (EPR) and quantitative tests confirmed the ultrafast conversion of O₃ to ˙OH (0.774 μM min⁻¹) on the surface of CeO₂ based ceramic catalyst. The quenching experiments further supported the predominant role of ˙OH in the mineralization of DMP. These results highlight the potential of using the heterogeneous catalytic ozonation system for the efficient removal of refractory organic matter from wastewater.

An efficient heterogeneous catalytic ozonation system using CeO₂/Al₂O₃ catalyst was developed to remove dimethyl phthalate (DMP) from wastewater.