Occurrence and Phase Distribution of Neutral and Ionizable Per- and Polyfluoroalkyl Substances (PFASs) in the Atmosphere and Plant Leaves around Landfills: A Case Study in Tianjin, China

Differential uptake and translocation of perfluoroalkyl substances by vegetable roots and leaves: Insight into critical influencing factors

Crop contamination of perfluoroalkyl substances (PFASs) may threaten human health, with root and leaves representing the primary uptake pathways of PFASs in crops. Therefore, it is imperative to elucidate the uptake characteristics of PFASs by crop roots and leaves as well as the critical influencing factors. In this study, the uptake and translocation of PFASs by roots and leaves of pak choi and radish were systematically explored based on perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA), perfluorooctanoic acid (PFOA), and perfluorooctane sulfonate (PFOS). Additionally, the roles of root Casparian strips, leaf stomata, and PFAS structures in the aforementioned processes were elucidated. Compared with pak choi, PFASs are more easily transferred to leaves after root uptake in radish, resulting from the lack of root Casparian strips. In pak choi root, the bioaccumulation of C4-C8 perfluoroalkyl carboxylic acids (PFCAs) showed a U-shaped trend with the increase of their carbon chain lengths, and the translocation potentials of individual PFASs from root to leaves negatively correlated with their chain lengths. The leaf uptake of PFOA in pak choi and radish mainly depended on cuticle sorption, with the evidence of a slight decrease in the concentrations of PFOA in exposed leaves after stomatal closure induced by abscisic acid. The leaf bioaccumulation of C4-C8 PFCAs in pak choi exhibited an inverted U-shaped trend as their carbon chain lengths increased. PFASs in exposed leaves can be translocated to the root and then re-transferred to unexposed leaves in vegetables. The longer-chain PFASs showed higher translocation potentials from exposed leaves to root. PFOS demonstrated a higher bioaccumulation than PFOA in crop roots and leaves, mainly due to the greater hydrophobicity of PFOS. Planting root vegetables lacking Casparian strips is inadvisable in PFAS-contaminated environments, in view of their higher PFAS bioaccumulation and considerable human intake.

Interaction and coexistence characteristics of dissolved organic matter and toxic metals with per- and polyfluoroalkyl substances in landfill leachate

Landfill leachate-containing per- and polyfluoroalkyl substances (PFAS) is both an important 'sink' and a 'source' of secondary pollution, posing serious threaten to surrounding environments. To date, the pollution characteristics of PFAS in landfill leachate, and the coexistence and interaction between PFAS and other leachate contaminants, such as dissolved organic matter (DOM) and toxic metals remains unclear. Herein, our results showed that 17 target PFAS, with concentrations ranged from 1804 to 43309 ng/L, were detected in landfill leachates. The main PFAS were short-chain and even-chain substances represented by perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS). Leachate derived DOM is mainly composed of protein-like and humic-like substance, among which the total contribution of protein-like substance is as high as 73.7%. Correlation analysis results showed that the distribution of PFAS was strongly correlated with the substituted functional groups (e.g., carboxyl and hydroxyl) on the aromatic ring of humic-like substance (C2 and E253/E203) and autochthonous metabolism by microbial activities (FI). Furthermore, Mn element showed a significantly strong correlation with PFAS. Both organic and inorganic substances positively correlated with toxic metals. Our findings are helpful to understand the environmental fate of PFAS, and contribute to decision-making regarding DOM, toxic metals, and PFAS management in landfill.

Suspect and non-target screening of chemicals of emerging Arctic concern in biota, air and human serum

Contaminants of emerging concern receive increasing attention in the Arctic environment. The aim of this study was to screen for chemicals of emerging Arctic concern (CEACs) in different types of Arctic samples including biota, air and human serum. We used a combination of gas chromatography (GC) and liquid chromatography (LC) with high resolution mass spectrometry (HRMS) for suspect and non-target screening (NTS). Suspect screening of 25 CEACs was based on published in-silico approaches for the identification of CEACs and revealed tetrabromophthalic anhydride (TBPA) in pilot whale and air, albeit with low detection frequencies (17 and 33%, respectively). An NTS workflow detected 49, 42, 31 and 30 compounds in pilot whale, ringed seal, air, and human serum, respectively, at confidence level 2 and 3. Although legacy POPs still dominated the samples, 64 CEACs were tentatively identified and further assessed for persistence (P), bioaccumulation (B), mobility (M), toxicity (T), and long-range transport potential (LRTP). While four PBT compounds were identified, 37 PMT substances dominated among these 64 compounds. Our study indicated that many chemicals of potential risk might be present in Arctic samples and would benefit from confirmation and further studies of their transport to and accumulation in the Arctic environment.

Partitioning of Neutral PFAS in Homes and Release to the Outdoor Environment: Results from the IPA Campaign

The distribution and fate of per- and polyfluoroalkyl substances (PFAS) in homes are not well understood. To address this, we measured nine neutral PFAS in dust, airborne particles, dryer lint, and on heating and air conditioning (HAC) filters in 11 homes in North Carolina as part of the Indoor PFAS Assessment (IPA) Campaign and compared them with concurrently collected gas and cloth measurements. Fluorotelomer alcohols (FTOHs) contributed most (≥75%) to total (∑) measured neutral PFAS concentrations in dust, HAC filter, and dryer lint samples, with mean ∑(FTOH) concentrations of 207 ng/g, 549 ng/g, and 84 ng/g, respectively. In particles, perfluorooctane sulfonamidoethanols (FOSEs) dominated, with a mean ∑(FOSE) concentration of 0.28 ng/m3 or 75,467 ng/g. For FTOHs and FOSEs, resulting mean dust-air, HAC filter-air, dryer lint-air and particle-air partition coefficients in units of log(m3/μg) ranged (across species) from -5.1 to -3.6, -4.9 to -3.5, -5.4 to -4.1, and -3.2 to -0.78, respectively. We estimate that cloth, gas phase, and HAC filters are the largest reservoirs for FTOHs, while cloth, HAC filters, and dust are the largest reservoirs for FOSEs. Release rates of neutral PFAS from homes to the outdoor environment are reported.

Theoretical study on the mechanisms, kinetics and risk assessment of OH radicals and Cl atom initiated transformation of HCFC-235fa in the atmosphere

Hydrochlorofluorocarbons (HCFCs) are important greenhouse gases and ozone-depleting substances. Thus, a thorough understanding of their atmospheric fate is essential for preventing and controlling atmospheric pollution. Herein, the atmospheric transformation mechanism of CF3CH2CClF2 (HCFC-235fa) by the OH radical and the Cl atom was carried out at the dual-level of CCSD(T)/aug-cc-pVTZ//M06-2X/6-311+G(d,p). The reaction rate coefficients were calculated using the multistructural canonical variational transition state theory with small curvature tunneling (MS-CVT/SCT) at 200-1000 K. The kMS-CVT/SCT(CF3CH2CClF2 + OH) and kMS-CVT/SCT(CF3CH2CClF2 + Cl) values are 9.05 × 10-15 and 1.95 × 10-17 cm3 molecule-1 s-1 at 297 K, respectively. The results show that the role of OH is more important than Cl in the degradation of CF3CH2CClF2. The atmospheric lifetimes (83 days-77.93 years), ozone destruction potential (0.001-0.023), and global warming potentials (GWP100 = 21.06-5157.35) of CF3CH2CClF2 were assessed, and these results indicate that CF3CH2CClF2 is atmospherically persistent and environmentally unfriendly. The evolution mechanisms of CF3C·HCClF2, CF3C(OO˙)HCClF2, and CF3C(O˙)HCClF2 in the presence of O2, HO2˙, and NO were investigated and discussed. The resulting products of CF3CH2CClF2 are mostly highly oxidized multi-functional compounds in the forms of aldehydes, ketones, and organic nitrates. A computational assessment of acute and chronic toxicities was performed at three levels of nutrition in order to improve the understanding of the potential toxicity of CF3CH2CClF2 and its degradation products to the aquatic environment. The acidification potential of CF3CH2CClF2 was calculated to be 1.141 and presumed to contribute to the formation of acid rain. The results may contribute to describing HCFCs' atmospheric fate, persistence, and environmental risks.

Remediation of per- and polyfluoroalkyl substances (PFAS) contaminated soil via soil washing with various water-organic solvent

The feasibility of soil washing for remediating PFAS-contaminated clay soil using various water-organic solvents was systematically investigated based on the combination of batch and column tests. Batch tests using 22 types of solvents highlighted that 0 % (water) and 5 % solvents could effectively extract PFCAs (≤ C9), while long-chain PFCAs (≥ C10) and PFSAs required 80 % solvents for optimal extraction, with efficiency in the order of EtOH ≤ MeOH < Acetonitrile (ACN), suggesting a strong correlation with carbon chain lengths and functional head groups. Column tests with six selected washing solutions indicated rapid desorption of PFOA and PFOS initially, peaking at liquid-to-solid (L/S) ratios of 3-4 for 0 % and 5 % solutions, and at an L/S ratio of 1 for 80 % solutions. To remediate 1 kg-dry soil to meet the legislatively permissible levels for groundwater in Japan (PFOA + PFOS < 50 ng/L), 11 L of 0 % solution (water) or 5 L of 80 % ACN are required for washing out PFOA, while 62 L of 0 % solution (water) or 53 L of 80 % ACN for PFOS. Future research should address the treatment of PFAS-rich wastewater generated from washing PFAS-contaminated soils and the impacts of washing solutions on soil.

Microplastics and PFAS air-water interaction and deposition

Although microplastics (MPs) and per- and polyfluoroalkyl substances (PFAS) have received tremendous attention separately, understanding their ubiquitous presence in the environment, persistence and toxicity requires comprehensive study of the fate and transport of co-existing MPs and PFAS. MPs may have large sorption capacity and can serve as vectors for PFAS to undergo long-range transport in water. Atmospheric deposition of both PFAS and MPs has been reported in urban, rural, and remote areas. This review identifies types and levels of PFAS and MPs in air, their interactions, and environmental factors contributing to their air-water deposition. MPs in combination with PFAS may carry combined toxicity and pose elevated risks to ecosystems and human health. Our review shows that air-water deposition of MPs and PFAS can be governed by environmental factors including precipitation, humidity, UV, wind, and particulate matter levels in the air. Increasing humidity may increase MP particle size due to hygroscopic growth, which affects its distribution and deposition rate. Humidity has been observed to have both positive and negative impacts on PFAS partitioning onto MPs. More attention should be paid to MPs and PFAS co-occurrence when addressing their transport behavior in air and deposition to aquatic systems.

Current trends and patterns of PFAS in agroecosystems and environment: A review

Per- and polyfluoroalkyl substances (PFASs) are one of the more well-known highly persistent organic pollutants with potential risks to agroecological systems. These compounds are of global concern due to their persistence and mobility, and they often lead to serious impacts on environmental, agricultural, and human health. In the past 20 years, the number of science publications on PFAS has risen; despite this, certain fundamental questions about PFAS occurrence, sources, mechanism of transport, and impacts on agroecosystems and the societies dependent on them are still open and evolving. There is a lack of systematic and comprehensive analysis of these concerns in agroecosystems. Therefore, we reviewed the current literature on PFAS with a focus on agroecosystems; our review suggests that PFASs are nearly ubiquitous in agricultural systems. We found the current research has limitations in analyzing PFAS in complex matrices because of their small size, distribution, and persistence within various environmental systems. There is consistency in the properties and composition of PFAS in and around agroecosystems, suggesting evidence of shared sources and similar components within different tropic levels. The introduction of new and varied sources of PFAS appear to be growing, adding to their residual accumulation in environmental matrices and leading to possible new types of chemical compounds that are difficult to assess accurately. This review determines existing research trends, understands mechanisms and incidence of PFAS within agroecosystems and their impact on human health, and thereby recommends further studies to remedy research gaps.

Roles of varying carbon chains and functional groups of legacy and emerging per-/polyfluoroalkyl substances in adsorption on metal-organic framework: Insights into mechanism and adsorption prediction

Metal-organic frameworks (MOFs) are promising adsorbents for legacy per-/polyfluoroalkyl substances (PFASs), but they are being replaced by emerging PFASs. The effects of varying carbon chains and functional groups of emerging PFASs on their adsorption behavior on MOFs require attention. This study systematically revealed the structure-adsorption relationships and interaction mechanisms of legacy and emerging PFASs on a typical MOF MIL-101(Cr). It also presented an approach reflecting the average electronegativity of PFAS moieties for adsorption prediction. We demonstrated that short-chain or sulfonate PFASs showed higher adsorption capacities (μmol/g) on MIL-101(Cr) than their long-chain or carboxylate counterparts, respectively. Compared with linear PFASs, their branched isomers were found to exhibit a higher adsorption potential on MIL-101(Cr). In addition, the introduction of ether bond into PFAS molecule (e.g., hexafluoropropylene oxide dimeric acid, GenX) increased the adsorption capacity, while the replacement of CF2 moieties in PFAS molecule with CH2 moieties (e.g., 6:2 fluorotelomer sulfonate, 6:2 FTS) caused a decrease in adsorption. Divalent ions (such as Ca2+ and SO42-) and solution pH have a greater effect on the adsorption of PFASs containing ether bonds or more CF2 moieties. PFAS adsorption on MIL-101(Cr) was governed by electrostatic interaction, complexation, hydrogen bonding, π-CF interaction, and π-anion interaction as well as steric effects, which were associated with the molecular electronegativity and chain length of each PFAS. The average electronegativity of individual moieties (named Me) for each PFAS was estimated and found to show a significantly positive correlation with the corresponding adsorption capacity on MIL-101(Cr). The removal rates of major PFASs in contaminated groundwater by MIL-101(Cr) were also correlated with the corresponding Me values. These findings will assist with the adsorption prediction for a wide range of PFASs and contribute to tailoring efficient MOF materials.

Evidences for the influence from key chemical structures of per- and polyfluoroalkyl substances on their environmental behaviors

This study carried out the atmospheric and precipitation observation in Beijing for nearly one year, and firstly simultaneously observed the pollution characteristics of PFASs and their main isomers, focusing on their gas-particle partitioning mechanism and dry and wet deposition characteristics. After deducting PFASs in the aqueous phase of particulate matter, the gas-particle partitioning coefficients (-7.04 to -5.49) were about 3-4 units smaller than before (-2.77 to -1.51), and all were smaller than 0, which indicated that each PFAS and isomer were more distributed in the gas phase. Dry deposition was dominant in the atmospheric deposition of each PFAS and isomer with relative contribution of 66 ± 17%, but the relative contribution of dry deposition was significantly different. It was found that the gas-particle partitioning coefficient can be influenced by key chemical structures such as carbon chain length, functional group type, and isomer structure. Furthermore, the gas-particle partitioning can influence the dry and wet deposition of PFASs. Specifically, PFASs with longer carbon chains, carboxylic acid functional group (compared to sulfonic acid functional group) or PFOA branched chain structures had larger gas-particle partitioning coefficients and can be more distributed in the hydrophobic phase of particulate matter, and their relative contributions of dry deposition were smaller.

A review of sample collection and analytical methods for detecting per- and polyfluoroalkyl substances in indoor and outdoor air

Per- and polyfluoroalkyl substances (PFAS) are a unique class of chemicals synthesized to aid in industrial processes, fire-fighting products, and to benefit consumer products such as clothing, cosmetics, textiles, carpets, and coatings. The widespread use of PFAS and their strong carbon-fluorine bonds has led to their ubiquitous presence throughout the world. Airborne transport of PFAS throughout the atmosphere has also contributed to environmental pollution. Due to the potential environmental and human exposure concerns of some PFAS, research has extensively focused on water, soil, and organismal detection, but the presence of PFAS in the air has become an area of growing concern. Methods to measure polar PFAS in various matrices have been established, while the investigation of polar and nonpolar PFAS in air is still in its early development. This literature review aims to present the last two decades of research characterizing PFAS in outdoor and indoor air, focusing on active and passive air sampling and analytical methods. The PFAS classes targeted and detected in air samples include fluorotelomer alcohols (FTOHs), perfluoroalkane sulfonamides (FASAs), perfluoroalkane sulfonamido ethanols (FASEs), perfluorinated carboxylic acids (PFCAs), and perfluorinated sulfonic acids (PFSAs). Although the manufacturing of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) has been largely phased out, these two PFAS are still often detected in air samples. Additionally, recent estimates indicate that there are thousands of PFAS that are likely present in the air that are not currently monitored in air methods. Advances in air sampling methods are needed to fully characterize the atmospheric transport of PFAS.

Occurrence and Fate of Per- and Polyfluoroalkyl Substances (PFAS) in Atmosphere: Size-Dependent Gas-Particle Partitioning, Precipitation Scavenging, and Amplification

The concerns about the fate of per- and polyfluoroalkyl substances (PFAS) in the atmosphere are continuously growing. In this study, size-fractionated particles, gas, and rainwater samples were simultaneously collected in Shijiazhuang, China, to investigate the multiphase distribution of PFAS in the atmosphere. Perfluoroalkyl carboxylic acids (PFCAs) dominated the total concentration of PFAS in atmospheric media. A strong positive relationship (0.79 < R2 < 0.99) was observed between the concentration of PFCAs and organic matter fraction (fOM) in different particle size fractions, while no such relationship for perfluoroalkyl sulfonic acids (PFSAs) and fOM, suggesting fOM may be an important factor influencing the size-dependent distribution of PFCAs. Temperature played a key role in the gas-particle partitioning of PFAS, while it did not significantly affect their particle-size-dependent distribution. The associative concentration fluctuation of particle and particle-bound PFAS during precipitation suggested that precipitation scavenging was an important mechanism for the removal of PFAS from the atmosphere. Furthermore, temporary increases in atmospheric PFAS concentrations were observed during the precipitation. Fugacity ratios of PFAS in rainwater and gas phase (log fR/fG ranged between 2.0 and 6.6) indicated a strong trend for PFAS to diffuse from the rainwater to the gas phase during the precipitation, which may explain that the concentration of PFAS in the gas phase continued to increase even at the end of the precipitation.

Exploring Negative Chemical Ionization of Per- and Polyfluoroalkyl Substances via a Liquid Electron Ionization LC-MS Interface

Per- and polyfluoroalkyl substances (PFASs) are a class of aliphatic manufactured compounds comprising fluoro-chemicals with varied functional groups and stable carbon-fluorine bonds. They are defined as "forever chemicals" due to their persistent and bioaccumulative character. These substances have been detected in various environmental samples, including water, air, soil, and human blood, posing significant health hazards. High-performance liquid chromatography coupled with electrospray ionization mass spectrometry (HPLC-ESI-MS) is typically employed for the analysis of PFASs. Negative chemical ionization (NCI) is generally coupled to gas chromatography (GC) and offers high selectivity and sensitivity for compounds containing electronegative atoms, such as PFASs. The liquid electron ionization (LEI) interface is an efficient mechanism developed to robustly couple a liquid flow rate from an LC system to an EI or a CI source. This interface has been successfully utilized for pesticide determination in UHPLC-LEI-CI in negative ion mode (NCI). This work aims to evaluate different parameters involved in the ionization of PFASs analyzed in LC-LEI-NCI and subsequently develop a method for their detection in real samples. The parameters considered for this study include (i) a comparison of different CI reagent gases (methane, isobutane, and argon); (ii) the use of acetonitrile as both the chromatographic solvent and CI reagent gas; (iii) the presence of water and formic acid as chromatographic mobile phase components; and (iv) the mobile phase flow rate. The optimal combination of these parameters led to promising results. Tentative fragmentation pathways of PFASs in NCI mode are proposed based on the dissociative electron capture mechanism.

Commercial compost amendments inhibit the bioavailability and plant uptake of per- and polyfluoroalkyl substances in soil-porewater-lettuce systems

Compost is widely used in agriculture as fertilizer while providing a practical option for solid municipal waste disposal. However, compost may also contain per- and polyfluoroalkyl substances (PFAS), potentially impacting soils and leading to PFAS entry into food chains and ultimately human exposure risks via dietary intake. This study examined how compost affects the bioavailability and uptake of eight PFAS (two ethers, three fluorotelomer sulfonates, and three perfluorosulfonates) by lettuce (Lactuca sativa) grown in commercial organic compost-amended, PFAS spiked soils. After 50 days of greenhouse experiment, PFAS uptake by lettuce decreased (by up to 90.5 %) with the increasing compost amendment ratios (0-20 %, w/w), consistent with their decreased porewater concentrations (by 30.7-86.3 %) in compost-amended soils. Decreased bioavailability of PFAS was evidenced by the increased in-situ soil-porewater distribution coefficients (Kd) (by factors of 1.5-7.0) with increasing compost additions. Significant negative (or positive) correlations (R2 ≥ 0.55) were observed between plant bioaccumulation (or Kd) and soil organic carbon content, suggesting that compost amendment inhibited plant uptake of PFAS mainly by increasing soil organic carbon and enhancing PFAS sorption. However, short-chain PFAS alternatives (e.g., perfluoro-2-methoxyacetic acid (PFMOAA)) were effectively translocated to shoots with translocation factors > 2.9, increasing their risks of contamination in leafy vegetables. Our findings underscore the necessity for comprehensive risk assessment of compost-borne PFAS when using commercial compost products in agricultural lands.

Emerging organic contaminants in the soil-plant-receptor continuum: transport, fate, health risks, and removal mechanisms

There is a lack of comprehensive reviews tracking emerging organic contaminants (EOCs) within the soil-plant continuum using the source-pathway-receptor-impact-mitigation (SPRIM) framework. Therefore, this review examines existing literature to gain insights into the occurrence, behaviour, fate, health hazards, and strategies for mitigating EOCs within the soil-plant system. EOCs identified in the soil-plant system encompass endocrine-disrupting chemicals, surfactants, pharmaceuticals, personal care products, plasticizers, gasoline additives, flame retardants, and per- and poly-fluoroalkyl substances (PFAS). Sources of EOCs in the soil-plant system include the land application of biosolids, wastewater, and solid wastes rich in EOCs. However, less-studied sources encompass plastics and atmospheric deposition. EOCs are transported from their sources to the soil-plant system and other receptors through human activities, wind-driven processes, and hydrological pathways. The behaviour, persistence, and fate of EOCs within the soil-plant system are discussed, including sorption, degradation, phase partitioning, (bio)transformation, biouptake, translocation, and bioaccumulation in plants. Factors governing the behaviour, persistence, and fate of EOCs in the soil-plant system include pH, redox potential, texture, temperature, and soil organic matter content. The review also discusses the environmental receptors of EOCs, including their exchange with other environmental compartments (aquatic and atmospheric), and interactions with soil organisms. The ecological health risks, human exposure via inhalation of particulate matter and consumption of contaminated food, and hazards associated with various EOCs in the soil-plant system are discussed. Various mitigation measures including removal technologies of EOCs in the soil are discussed. Finally, future research directions are presented.

Per- and polyfluoroalkyl substances in waterbird feathers around Poyang Lake, China: Compound and species-specific bioaccumulation

As a nondestructive means of environmental monitoring, bird feathers have been used to analyze levels of per- and polyfluoroalkyl substances (PFASs) in specific environments. In this study, feather samples from 10 waterbird species around Poyang Lake were collected, and a pretreatment method for PFASs in feathers was optimized. The results showed that a combined cleaning method using ultrapure water and n-hexane effectively removed external PFASs. Twenty-three legacy and emerging PFASs were identified in the feathers of waterbirds, of which hexafluoropropylene oxides (HFPOs), chlorinated polyfluoroalkyl ether sulfonates (Cl-PFESAs), and sodium p-perfluorinated noneoxybenzene sulfonate (OBS) were reported for the first time, with their concentrations ranging from 0.060-2.4 ng·g-1 dw, 0.046-30 ng·g-1 dw, and lower than the method detection limit to 30 ng·g-1 dw, respectively. Compound- and species-specific bioaccumulation of PFASs was observed in the feathers of different waterbird species, suggesting that different PFAS types can be monitored through the selection of different species. Moreover, the concentrations of most PFCAs (except perfluorobutyric acid), perfluorooctane sulfonate (PFOS), and perfluorooctane sulfonamide (FOSA) were significantly positively correlated with δ15N (p < 0.05), while the concentrations of HFPOs, Cl-PFESAs, and OBS had significant positive correlations with δ13C. This indicates that the bioaccumulation of legacy and emerging PFASs in waterbird feathers is affected by their trophic level, feeding habits, and foraging area.

Occurrence, behaviors, and fate of per- and polyfluoroalkyl substances (PFASs) in typical municipal solid waste disposal sites

Per- and polyfluoroalkyl substances (PFASs) have become a crucial environmental concern owing to their exceptional persistence, ability to bioaccumulate within ecosystems, and potential to adversely affect biota. Products and materials containing PFASs are usually discarded into municipal solid waste (MSW) at the end of their life cycle, and the fate of PFASs may differ when different disposal methods of MSWs are employed. To date, limited research has focus on the occurrence, behaviors, and fate of PFASs emitted from various MSW disposal sites. This knowledge gap may lead to an underestimation of the contribution of MSW disposal sites as a source of PFASs in the environment. In this review, we collated publications concerning PFASs from typical MSW disposal sites (i.e., landfills, incineration plants, and composting facilities) and explored the occurrence patterns and behaviors of PFASs across various media (e.g., landfill leachate/ambient air, incineration plant leachate/ash, and compost products) in these typical MSW disposal sites. In particular, this review highlighted ultrashort-chain perfluoroalkyl acids and "unknown"/emerging PFASs. Additionally, it meticulously elucidated the use of non-specific techniques and non-target analysis for screening and identifying these overlooked PFASs. Furthermore, the composition profiles, mass loads, and ecological risks of PFASs were compared across the three typical disposal methods. To the best of our knowledge, this is the first review regarding the occurrence, behaviors, and fate of PFASs in typical MSW disposal sites on a global scale, which can help shed light on the potential environmental impacts of PFASs harbored in MSWs and guide future waste management practices.

Per- and polyfluoroalkyl substances (PFASs) in Chinese surface water: Temporal trends and geographical distribution

PFAS, recognized as persistent organic pollutants, present risks to both the ecological environment and human health. Studying PFASs in surface water yields insights into pollution dynamics. However, existing research on PFASs surface water pollution in China often focuses on specific regions, lacking comprehensive nationwide analyses. This study examined 48 research papers covering PFAS pollution in Chinese surface water, involving 49 regions and 1338 sampling sites. The results indicate widespread PFAS contamination, even in regions like Tibet. Predominant PFAS types include PFOA and PFOS, and pollution is associated with the relocation of industries from developed to developing countries post-2010. The shift from long-chain to short-chain PFASs aligns with recent environmental policy proposals. Geographic concentration of PFAS pollution correlates with industry distribution and economic development levels. Addressing point source pollution, especially from wastewater plant tailwater, is crucial for combating PFAS contamination. Greater emphasis should be placed on addressing short-chain PFASs.

Research Needs Regarding the Vapor Intrusion Potential of Volatile Per- and Polyfluoroalkyl Substances

Certain per- or polyfluoroalkyl substances [e.g., fluorotelomer alcohols (FtOHs), perfluorooctane sulfonamides (FOSAs), and perfluorooctane sulfonamidoethanols (FOSEs)] have sufficient volatility to merit investigation of the vapor intrusion pathway on a site-specific basis, when they occur as subsurface contaminants in sufficient concentrations near occupied buildings. This perspective summarizes some of the evidence that these categories of per- or polyfluoroalkyl substances are volatile and offers specific research questions and objectives, for purposes of further assessing whether FtOHs, FOSAs, and/or FOSEs can pose indoor exposures via soil vapor intrusion and under what circumstances.

Tissue-specific distribution and bioaccumulation of perfluoroalkyl acids, isomers, alternatives, and precursors in citrus trees of contaminated fields: Implication for risk assessment

The ingestion of fruits containing perfluoroalkyl acids (PFAAs) presents potential hazards to human health. This study aimed to fill knowledge gaps concerning the tissue-specific distribution patterns and bioaccumulation behavior of PFAAs and their isomers, alternatives, and precursors (collectively as per-/polyfluoroalkyl substances, PFASs) within citrus trees growing in contaminated fields. It also assessed the potential contribution of precursor degradation to human exposure risk of PFASs. High concentrations of total target PFASs (∑PFASstarget, 92.45-7496.16 ng/g dw) and precursors measured through the total oxidizable precursor (TOP) assay (130.80-13979.21 ng/g dw) were found in citrus tree tissues, and short-chain PFASs constituted the primary components. The total PFASs concentrations followed the order of leaves > fruits > branches, bark > wood, and peel > pulp > seeds. The average contamination burden of peel (∑PFASstarget: 57.75%; precursors: 71.15%) was highest among fruit tissues. Bioaccumulation factors (BAFs) and translocation potentials of short-chain, branched, or carboxylate-based PFASs exceeded those of their relatively hydrophobic counterparts, while ether-based PFASs showed lower BAFs than similar PFAAs in above-ground tissues of citrus trees. In the risk assessment of residents consuming contaminated citruses, precursor degradation contributed approximately 36.07% to total PFASs exposure, and therefore should not be ignored.

Tree barks for retrospective measurement and source appointment of airborne perfluoroalkyl and polyfluoroalkyl substances

Tree bark is a useful bioindicator of atmospheric pollution. It is specially suitable for airborne perfluoroalkyl and polyfluoroalkyl substances (PFASs) investigation due to persistence of ionic PFASs. The present work firstly systematically studied tree barks as a bioindicator of airborne PFASs. Comparison with the regular active and passive samplers found barks could produce long-term measurement of airborne PFASs, and could record the historical emission of PFASs with retrospective time frame as long as decades. Factors, e.g. tree type, trunk diameter, and sampling depth, can affect PFAS accumulation in barks, and these factors should be kept consistent during sampling. In a study area spatial distribution of airborne PFASs can be obtained by interpolation of bark results, and the concerned region can be located. Properties of the emission sources can be characterized, and the potential sources can be tracked based on the bark results. Their contributions can be further estimated by the source appointment strategies. In the economically and industrially developed study area of the present study, eight cities of southern Jiangsu Province of China, total ionic PFAS concentration of camphor bark samples collected in 34 sites was 0.44-359 ng/g dw (dry weight), dominated by perfluoroalkyl carboxylic acids (PFCAs). Two types of possible sources were characterized as with long-chained PFCAs and PFOA (perfluorooctanoic acid) as the main components respectively. The sources were appointed as fluoropolymer manufacturing and textile industries, the important PFAS application fields, and their relative contribution was estimated as 32.5% and 67.5% respectively. The present study can provide useful advice to the method framework of using barks for long-term occurrence investigation, concerned region location, and emission source appointment of airborne PFASs in a study area. Based on the bark results, effective strategies can be further made for PFAS pollution elimination and risk control.

Perfluoroalkyl acid precursors in agricultural soil-plant systems: Occurrence, uptake, and biotransformation

Perfluoroalkyl acid (PFAA) precursors have been used in various consumer and industrial products due to their hydrophobic and oleophobic properties. In recent years, PFAA precursors in agricultural soil-plant systems have received increasing attention as they are susceptible to biotransformation into metabolites with high biotoxicity risks to human health. In this review, we systematically assessed the occurrence of PFAA precursors in agricultural soils, taking into account their sources and biodegradation pathways. In addition, we summarized the findings of the relevant literature on the uptake and biotransformation of PFAA precursors by agricultural plants. The applications of biosolids/composts and pesticides are the main sources of PFAA precursors in agricultural soils. The physicochemical properties of PFAA precursors, soil organic carbon (SOC) contents, and plant species are the key factors influencing plant root uptakes of PFAA precursors from soils. This review revealed, through toxicity assessment, the potential of PFAA precursors to generate metabolites with higher toxicity than the parent precursors. The results of this paper provide a reference for future research on PFAA precursors and their metabolites in soil-plant systems.

Quantification of perfluorinated compounds in atmospheric particulate shows potential connection with environmental event

A method of quantification of perfluorinated compounds (PFCs) from atmospheric particulate matter (APM) is described. A single step pretreatment method, selective pressurized liquid extraction (SPLE), was developed to reduce the high matrix background and avoid contamination from commonly used multiple sample pretreatment steps. An effective sorbent was selected to purify the PFCs during SPLE, followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), for quantification of PFCs. Conditions affecting the SPLE efficiency, including temperature, static extraction time, and number of extraction cycles used, were studied. The optimum conditions were found to be 120°C, 10 min, and 3 cycles, respectively. LC-MS/MS method was developed to obtain the optimal sensitivity specific to PFCs. The method detection limits (MDLs) were 0.006 to 0.48 ng/g for the PFCs studied and the linear response range was from 0.1 to 100 ng/g. To ensure accurate values were obtained, each step of the experiment was evaluated and controlled to prevent contamination. The optimized method was tested by performing spiking experiments in natural particulate matter matrices and good rates of recovery and reproducibility were obtained for all target compounds. Finally, the method was successfully used to measure 16 PFCs in the APM samples collected in Beijing over five years from 2015 to 2019. It is observed that some PFCs follow the trend of total PFC changes, and can be attributed to the environment influencing events and policy enforcement, while others don't seem to change as much with time of the year or from year to year.

Spatial distribution characteristics of perfluoroalkyl substances in bulk and grain size fractionated sediments in Shenzhen Bay

Understanding Perfluoroalkyl substances (PFASs) spatial distribution in natural environments is crucial due to their environmental persistence and potential bioaccumulation. However, limited research has investigated PFASs spatial distribution at a high resolution, especially in the Guangdong-Hong Kong-Macao Greater Bay Area. Here, we examined the composition and concentration of PFASs in 36 bulk surface sediments and grain-size fractionated sediments from 9 representative sites to determine the spatial distribution characteristics in Shenzhen Bay. We found that ΣPFASs decreased gradually from nearshore area to offshore area (0.680 and 0.297 ng g-1 dw, respectively). Furthermore, PFASs are easily adsorbed on fine-grained sediments, likely due to their chain length and hydrophobicity. We argue that the lateral movement of sediments may transport fine-grained sediments associated with ΣPFASs out of the bay, resulting in the spatial difference in ΣPFASs in Shenzhen Bay. Our findings provide important insights into explore the mechanisms associated with preservation and transport of PFASs.

Bioaccumulation of PFASs in cabbage collected near a landfill site in China: Laboratory and field investigations

Previous studies found that the bioaccumulation of PFASs in vegetables poses potential risks to the health of residents in local areas near landfills in China. Therefore, our study investigated the uptake of perfluoroalkyl and polyfluoroalkyl substances (PFASs) and their accumulation and distribution in cabbage roots, stems, and leaves under both field and laboratory hydroponic conditions. It was found that the sum of concentration of 15 PFASs (designated as Σ15PFASs) in roots, stems, and leaves ranged from 24.8 to 365 ng/g, 49.2 to 204 ng/g, 11.9 to 115 ng/g, respectively, in the order of roots > stems > leaves, which were generally higher than the range in soil samples (6.07-63.91 ng/g). The dominant compounds in cabbage were PFBA and PFDA in field and hydroponic samples, respectively. The hydroponic experimental results revealed that the sum concentration of 10 PFASs (designated as Σ10PFASs) was the highest in roots, and PFDA was the dominant compound in different cabbage fractions. Bioconcentration factors of short-chain PFBA, PFPeA, and PFBS in hydroponics followed the trend of leaves > stems > roots, indicating that they were readily transported from roots to stems, and then to leaves, with the majority stored in leaves at abundance levels of 53 %, 71 %, and 60 %, respectively. Additionally, the much higher concentration factor for 6:2 FTS in leaves suggested a higher potential health risk than PFOS in terms of dietary consumption of cabbage leaves.

A critical review of perfluoroalkyl and polyfluoroalkyl substances (PFAS) landfill disposal in the United States

Landfills manage materials containing per- and polyfluoroalkyl substances (PFAS) from municipal solid waste (MSW) and other waste streams. This manuscript summarizes state and federal initiatives and critically reviews peer-reviewed literature to define best practices for managing these wastes and identify data gaps to guide future research. The objective is to inform stakeholders about waste-derived PFAS disposed of in landfills, PFAS emissions, and the potential for related environmental impacts. Furthermore, this document highlights data gaps and uncertainties concerning the fate of PFAS during landfill disposal. Most studies on this topic measured PFAS in liquid landfill effluent (leachate); comparatively fewer have attempted to estimate PFAS loading in landfills or other effluent streams such as landfill gas (LFG). In all media, the reported total PFAS heavily depends on waste types and the number of PFAS included in the analytical method. Early studies which only measured a small number of PFAS, predominantly perfluoroalkyl acids (PFAAs), likely report a significant underestimation of total PFAS. Major findings include relationships between PFAS effluent and landfill conditions - biodegradable waste increases PFAS transformation and leaching. Based on the results of multiple studies, it is estimated that 84% of PFAS loading to MSW landfills (7.2 T total) remains in the waste mass, while 5% leaves via LFG and 11% via leachate on an annual basis. The environmental impact of landfill-derived PFAS has been well-documented. Additional research is needed on PFAS in landfilled construction and demolition debris, hazardous, and industrial waste in the US.

The sources and bioaccumulation of per- and polyfluoroalkyl substances in animal-derived foods and the potential risk of dietary intake

Per- and polyfluoroalkyl substances (PFAS) have attracted increasing attention due to their environmental persistence and potential toxicity. Diet is one of the main routes of human exposure to PFAS, particularly through the consumption of animal-derived foods (e.g., aquatic products, livestock and poultry, and products derived from them). This review summarizes the source, bioaccumulation, and distribution of PFAS in animal-derived foods and key influential factors. In most environmental media, perfluorooctanoic acid and perfluorooctane sulfonate are the dominant PFAS, with the levels of short-chain PFAS such as perfluorobutyric acid and perfluorohexane sulfonate surpassing them in some watersheds and coastal areas. The presence of PFAS in environmental media is mainly influenced by suspended particulate matter, microbial communities as well as temporal and spatial factors, such as season and location. Linear PFAS with long carbon chains (C ≥ 7) and sulfonic groups tend to accumulate in organisms and contribute significantly to the contamination of animal-derived foods. Furthermore, PFAS, due to their protein affinity, are prone to accumulate in the blood and protein-rich tissues such as the liver and kidney. Species differences in PFAS bioaccumulation are determined by diet, variances in protein content in the blood and tissues and species-specific activity of transport proteins. Carnivorous fish usually show higher PFAS accumulation than omnivorous fish. Poultry typically metabolize PFAS more rapidly than mammals. PFAS exposures in the processing of animal-derived foods are also attributable to the migration of PFAS from food contact materials, especially those in higher-fat content foods. The human health risk assessment of PFAS exposure from animal-derived foods suggests that frequent consumption of aquatic products potentially engender greater risks to women and minors than to adult males. The information and perspectives from this review would help to further identify the toxicity and migration mechanism of PFAS in animal-derived foods and provide information for food safety management.

Comprehensive Assessment of Exposure Pathways for Perfluoroalkyl Ether Carboxylic Acids (PFECAs) in Residents Near a Fluorochemical Industrial Park: The Unanticipated Role of Cereal Consumption

With the replacement of perfluorooctanoic acid (PFOA) with perfluorinated ether carboxylic acids (PFECAs), residents living near fluorochemical industrial parks (FIPs) are exposed to various novel PFECAs. Despite expectations of low accumulation, short-chain PFECAs, such as perfluoro-2-methoxyacetic acid (PFMOAA), previously displayed a considerably high body burden, although the main exposure routes and health risks remain uncertain. Here, we explored the distribution of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in diverse environmental media surrounding a FIP in Shandong Province, China. PFECAs were found at elevated concentrations in all tested matrices, including vegetables, cereals, air, and dust. Among residents, 99.3% of the ∑36PFAS exposure, with a 43.9% contribution from PFECAs, was due to gastrointestinal uptake. Dermal and respiratory exposures were negligible at 0.1 and 0.6%, respectively. The estimated daily intake (EDI) of PFMOAA reached 114.0 ng/kg body weight (bw)/day, ranking first among all detected PFECAs. Cereals emerged as the dominant contributor to PFMOAA body burden, representing over 80% of the overall EDI. The median EDI of hexafluoropropylene oxide dimer acid (HFPO-DA) was 17.9 ng/kg bw/day, markedly higher than the USEPA reference doses (3.0 ng/kg bw/day). The absence of established threshold values for other PFECAs constrains a comprehensive risk assessment.

Measurement of fluorotelomer alcohols based on solid phase microextraction followed by gas chromatography-mass spectrometry and its application in solid waste study

This work developed a method based on solid phase microextraction followed by gas chromatography/mass spectrometry (SPME-GC/MS) for the measurement of fluorotelomer alcohols (FTOHs) in gas samples. The method quantification limit (MQL) is 6-7 ng/L for 6:2 fluorotelomer alcohols (6:2 FTOH) and 8:2 fluorotelomer alcohols (8:2 FTOH). In contrast to common methods such as thermal desorption combined with GC-MS, it needs neither pre-concentration equipment nor large sample volume. The extraction-evaporation-GC/MS is commonly used in literature for FTOHs measurement in solids samples. We developed a method to measure FTOHs in solid samples by adding solvent extraction prior to headspace SPME-GC/MS. The extraction-headspace SPME-GC/MS method has a quantification limit of 40-43 ng per gram for 6:2 FTOH and 8:2 FTOH in solid samples. This is comparable to the MQLs for the extraction-evaporation-GC/MS method. Removing the solvent evaporation step decreased the risk of contamination and loss of analytes. The developed methods were successfully used in three examples of solid waste study: 1) measuring 6:2 FTOH and 8:2 FTOH above the MQL in gas emissions from a closed landfill, 2) finding 6:2 FTOH above MQL in 9 of 31 solid consumer products, and 3) finding that the release of 6:2 FTOH in simulated landfills containing popcorn bags was linear at a rate of 3.15 ng/g popcorn bags-day and that partial 6:2 FTOH was from the hydrolysis of precursors.

Organic ultraviolet absorbents in soils and typical plants from an industrial metropolis in China: Concentrations, profiles and environmental implications

There is accumulating evidence of the toxicity of organic ultraviolet absorbers (OUVAs); however, limited information is available regarding the presence of OUVAs in terrestrial environments and organisms. Therefore, this study was conducted to investigate the occurrence of 11 OUVAs in soils and typical plant species from an industrial metropolis in China. Total OUVA concentrations in soils ranged from 1.30 to 80.3 ng g-1 DW. Based on comparison with previously reported data, OUVA contamination in soil was not severe. Benzophenone and octocrylene were the dominant OUVAs in soils, with median contributions to total concentrations of 25% and 15%, respectively. Source assessment revealed that the observed OUVA contamination primarily originated from industrial activities and the use of personal care products. The concentration of 11 OUVAs in plants ranged from 159 to 4470 ng g-1 DW, at high levels. Our findings imply that great attention should be given to the presence of these chemicals in plants because of the risk they could pose as well as the potential for biomagnification as plants are eaten by insects and birds. Our results also indicate the necessity to further study the geochemical behavior of these chemicals in urban ecosystems in order to better manage the harmfulness to terrestrial ecological health caused by their exposure through the food chains.

Target and non-target analyses of neutral per- and polyfluoroalkyl substances from fluorochemical industries using GC-MS/MS and GC-TOF: Insights on their environmental fate

Novel and emerging per- and polyfluoroalkyl substances (PFAS) are a key issue of concern in global environmental studies. In this study, air, sediment, and wastewater samples were collected from areas in and/or surrounded by fluorochemical-related industrial facilities to characterize the contamination profiles of neutral and novel PFAS (n-PFAS) using a gas chromatograph-based target and non-target analyses. Fluorotelomer alcohols were predominant in the samples, accounting for 80 % of the n-PFAS, followed by fluorotelomer acrylates. Air samples collected proximate to the durable water repellent (DWR) facility had the highest concentration of n-PFAS, which was approximately two orders of magnitude higher than those found in others. Non-target analysis identified fluorotelomer iodides and fluorotelomer methacrylate in multiple matrices near DWR facilities, indicating significant contamination of n-PFAS. Levels of both C6- and C8-based PFAS reflected a shift in usage patterns from C8- to C6-based fluorochemicals. Matrix-dependent profiles of n-PFAS revealed that shorter-chain (e.g., C6) and longer-chain (>C8) PFAS were predominant in air and sediment, respectively, implying that air and sediment are mobile and secondary sources of PFAS. Untreated and treated industrial wastewater also contained n-PFAS and their transformation products. The findings shed light on our understanding of the multi-matrix distribution and transport of PFAS.

Less is more: a methodological assessment of extraction techniques for per- and polyfluoroalkyl substances (PFAS) analysis in mammalian tissues

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants. Studying the bioaccumulation in mammalian tissues requires a considerable effort for the PFAS extraction from complex biological matrices. The aim of the current work was to select and optimize the most efficient among common extraction strategies for eleven perfluoroalkyl acids (PFAA). Primary extractions from wild boar tissues (liver, kidney, and lung) were performed with methanol at neutral, acidic, or alkaline conditions, or with methyl-tert-butyl ether (MTBE) after ion-pairing with tetrabutylammonium (TBA) ions. A second purification step was chosen after comparing different solid-phase extraction (SPE) cartridges (Oasis WAX, ENVI-Carb, HybridSPE Phospholipid) and various combinations thereof or dispersive SPE with C18 and ENVI-Carb material. The best extraction efficiencies of the liquid PFAA extraction from tissue homogenates were achieved with methanol alone (recoveries from liver 86.6-114.4%). Further purification of the methanolic extracts using dispersive SPE or Oasis WAX columns decreased recoveries of most PFAA, whereas using pairs of two SPE columns connected in series proved to be more efficient albeit laborious. Highest recoveries for ten out of eleven PFAA were achieved using ENVI-Carb columns (80.3-110.6%). In summary, the simplest extraction methods using methanol and ENVI-Carb columns were also the most efficient. The technique was validated and applied in a proof of principle analysis in human tissue samples.

Per- and polyfluoroalkyl substances in ambient fine particulate matter in the Pearl River Delta, China: Levels, distribution and health implications

Per- and polyfluoroalkyl substances (PFAS) have attracted worldwide attention as one of persistent organic pollutants; however, there is limited knowledge about the exposure concentrations of PFAS-contained ambient particulate matter and the related health risks. This study investigated the abundance and distribution of 32 PFAS in fine particulate matter (PM2.5) collected from 93 primary or secondary schools across the Pearl River Delta region (PRD), China. These chemicals comprise four PFAS categories which includes perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs), perfluoroalkyl acid (PFAA) precursors and PFAS alternatives. In general, concentrations of target PFAS ranged from 11.52 to 419.72 pg/m3 (median: 57.29 pg/m3) across sites. By categories, concentrations of PFSAs (median: 26.05 pg/m3) were the dominant PFAS categories, followed by PFCAs (14.25 pg/m3), PFAS alternatives (2.75 pg/m3) and PFAA precursors (1.10 pg/m3). By individual PFAS, PFOS and PFOA were the dominant PFAS, which average concentration were 24.18 pg/m3 and 6.05 pg/m3, respectively. Seasonal variation showed that the concentrations of PFCAs and PFSAs were higher in winter than in summer, whereas opposite seasonal trends were observed in PFAA precursors and PFAS alternatives. Estimated daily intake (EDI) and hazard quotient (HQ) were used to assess human inhalation-based exposure risks to PFAS. Although the health risks of PFAS via inhalation were insignificant (HQ far less than one), sufficient attention should be levied to ascertain the human exposure risks through inhalation, given that exposure to PFAS through air inhalation is a long term and cumulative process.

Research Progress of Perfluoroalkyl Substances in Edible Oil-A Review

Perfluoroalkyl substances (PFASs) have been widely used in different types of consumer and industrial applications such as surfactants, household cleaning products, textiles, carpets, cosmetics, firefighting foams, and food packaging because of their good stability and special physicochemical properties of hydrophobicity, oleophobicity, high temperature resistance, etc. Meanwhile, PFASs are considered an emerging organic pollutant due to their persistence and potential toxicity to human health. PFASs occur in edible oil, an important component of the global diet, mainly in three ways: raw material contamination, process contamination, and migration from oil contact materials. Thus, the occurrence of PFAS in edible oils has drawn more and more attention in recent years. In this work, the pertinent literature of the last two decades from the Web of Science database was researched. This review systematically addressed the potential sources, the contamination levels, and the progress of the determination of PFASs in edible oil. It aims to provide a relatively whole profile of PFASs in edible oil, render assistance to minimise human exposure to PFASs, and standardise the detection methods of perfluoroalkyl substances in edible oil.

Domestic Dogs and Horses as Sentinels of Per- and Polyfluoroalkyl Substance Exposure and Associated Health Biomarkers in Gray's Creek North Carolina

Central North Carolina (NC) is highly contaminated with per- and polyfluoroalkyl substances (PFAS), in part due to local fluorochemical production. Little is known about the exposure profiles and long-term health impacts for humans and animals that live in nearby communities. In this study, serum PFAS concentrations were determined using liquid chromatography high-resolution mass spectrometry and diagnostic clinical chemistry endpoints were assessed for 31 dogs and 32 horses that reside in Gray's Creek NC at households with documented PFAS contamination in their drinking water. PFAS were detected in every sample, with 12 of the 20 PFAS detected in ≥50% of samples from each species. The average total PFAS concentrations in horses were lower compared to dogs who had higher concentrations of PFOS (dogs 2.9 ng/mL; horses 1.8 ng/mL), PFHxS (dogs 1.43 ng/mL, horses < LOD), and PFOA (dogs 0.37 ng/mL; horses 0.10 ng/mL). Regression analysis highlighted alkaline phosphatase, glucose, and globulin proteins in dogs and gamma glutamyl transferase in horses as potential biomarkers associated with PFAS exposure. Overall, the results of this study support the utility of companion animal and livestock species as sentinels of PFAS exposure differences inside and outside of the home. As in humans, renal and hepatic health in domestic animals may be sensitive to long-term PFAS exposures.

Mechanisms of propeller jet-induced migration, release, and distribution of perfluoroalkyl acids in sediment-water systems

Perfluoroalkyl acids (PFAAs) are continuously accumulated in surface sediments due to extensive and long-term application. However, the mechanisms through which disturbances induced by ship propeller jets at the riverbed cause secondary release of PFAAs from sediments remain unclear. In this study, the effects of different propeller rotational speeds on PFAA migration, release, and distribution in multiphase media were investigated by performing indoor flume experiments combined with particle tracking velocimetry. Moreover, key factors influencing PFAA migration and distribution were identified, and partial least squares regression (PLS) method was applied to develop quantitative prediction models of relationships among hydrodynamics, physicochemical parameters, and PFAA distribution coefficients. The total PFAA concentrations (ΣPFAAs) in overlying water under propeller jet action exhibited transient characteristics and hysteresis with time after the disturbance. In contrast, the ΣPFAAs in suspended particulate matter (SPM) exhibited an upward trend throughout the process with consistent characteristics. The spatial distribution trends of PFAAs in overlying water and SPM at different propeller rotational speeds featured vertical variability and axial consistency. Furthermore, PFAA release from sediments was driven by axial flow velocity (V_x) and Reynolds normal stress R_yy, while PFAA release from porewater was inextricably linked to Reynolds stresses R_xx, R_xy, and R_zz (p < 0.05). PLS regression models showed that variations in Vorticity, dissolved organic carbon, and pH influenced the decreases in PFAA distribution coefficients between SPM and overlying water (K_D-SW) as propeller rotational speed increased, except for very long-chain PFAAs (C > 10). The increases in PFAA distribution coefficients between sediment and porewater (K_D-SP) were mainly determined by physicochemical parameters of sediments, and the direct effect of hydrodynamics was relatively weak. Our study provides valuable information regarding the migration and distribution of PFAAs in multiphase media under propeller jet disturbance (both during and after disturbance).

Per- and polyfluoroalkyl substances and volatile methyl siloxanes in global air: Spatial and temporal trends

The study reports on the atmospheric concentrations of per- and polyfluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) measured using sorbent-impregnated polyurethane foam disks (SIPs) passive air samplers. New results are reported for samples collected in 2017, which extends temporal trend information to the period 2009-2017, for 21 sites where SIPs have been deployed since 2009. Among neutral PFAS, fluorotelomer alcohols (FTOHs) had higher concentrations than perfluoroalkane sulfonamides (FOSAs) and perfluoroalkane sulfonamido ethanols (FOSEs) with levels of ND‒228, ND‒15.8, ND‒10.4 pg/m³, respectively. Among ionizable PFAS, the sum of perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs) in air were 0.128-781 and 6.85-124 pg/m³, respectively. Longer-chain i.e. C₉-C₁₄ PFAS, which are relevant to the recent proposal by Canada for a listing of long-chain (C₉-C₂₁) PFCAs to the Stockholm Convention, were also detected in the environment at all site categories including Arctic sites. Cyclic and linear VMS ranged between 1.34‒452 and 0.01-12.1 ng/m³, respectively, showing dominance in urban areas. Despite the wide range of levels observed across different site categories, geometric means of the PFAS and VMS groups were fairly similar when grouped according to the five United Nations regions. Variable temporal trends in air (2009-2017) were observed for both PFAS and VMS. PFOS, which has been listed in the Stockholm Convention since 2009, is still showing increasing tendencies at several sites, indicating constant input from direct and/or indirect sources. These new data inform international chemicals management for PFAS and VMS.

High density polyethylene (HDPE) and thermoplastic polyurethane (TPU) wristbands as personal passive samplers monitoring per- and polyfluoroalkyl substances (PFASs) exposure to postgraduate students

Per- and polyfluoroalkyl substances (PFASs) present adverse effects for human health, which result in strong needs for reliable tools monitoring personal exposure to PFASs. This study manufactured two wristbands of high density polyethylene (HDPE) and thermoplastic polyurethane (TPU), and used the wristbands to monitor PFASs personal exposure. The analytical method was developed to measure 32 PFASs in the paired HDPE and TPU wristbands worn by 60 postgraduates. Twenty-nine of 32 PFASs were detected and hexafluoropropylene oxide dimer acid (HFPO-DA) was predominant individual PFASs with median concentrations of 337 and 554 pg/g for HDPE and TPU wristbands respectively. The gender and grade of students had moderate effects on PFASs distribution in the wristbands. Higher PFASs levels were determined in the two wristbands worn by the male students compared to the females, and the greatest PFASs concentration was observed in the wristbands worn by the first-year postgraduates, follow by second- and third-year postgraduates. Additionally, significant correlations between paired HDPE and TPU wristbands were observed for perfluorobutanoic acid (PFBA), perfluorohexane sulfonic acid (PFHxS), perfluoroheptane sulfonic acid (PFHpS), perfluorooctane sulfonic acid (PFOS), and HFPO-DA. These results suggest that HDPE and TPU wristbands can be used as effective tools for monitoring personal PFAS exposure.

Residue Distribution and Daily Exposure of Per- and Polyfluoroalkyl Substances in Indica and Japonica Rice

Per- and polyfluoroalkyl substances (PFAS) have excellent chemical stability but have adverse environmental impacts of concern. Furthermore, bioaccumulation of PFAS in rice varieties─which is the essential staple food crop in Asia─has not been verified. Therefore, we cultivated Indica (Kasalath) and Japonica rice (Koshihikari) in the same Andosol (volcanic ash soil) paddy field and analyzed the air, rainwater, irrigated water, soil, and rice plants for 32 PFAS residues, throughout the cultivation to human consumption. During the rice cultivation period, the cultivation environment in atmospheric particulate matter (PM) constituted perfluoroalkyl carboxylic acids (PFCAs), with minimal perfluorinated sulfonic acids (PFSAs). Furthermore, perfluorooctanesulfonic acid (PFOS) migrates at a PM > 10 to drop in a cultivation field and was conducive to leakage and accumulation of PFCAs in air particles in the field environment. Moreover, precipitation was a sources of irrigation water contamination, and cultivated soil with a high carbon content could capture PFSAs and PFCAs (over C₁₀). There were no major differences in residual PFAS trends in the rice varieties, but the distribution of PFAS in the growing soil, air, and rainwater differed. The edible white rice part was mainly affected by irrigation water in both varieties. Monte Carlo simulations of daily exposure assessments of PFOS, PFOA, and perfluorononanic acid showed similar results for Indians consuming Indica rice and Japanese consuming Japonica rice. The results indicate that the ultratrace PFAS residue concentrations and their daily exposure were not cultivar-specific.

PFAS on atmospheric aerosol particles: a review

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants of concern to human health. These synthetic chemicals are in widespread use for consumer products, firefighting foams, and industrial applications. They have been detected all over the globe, including at remote locations distant from any possible point sources. One mechanism for long-range transport of PFAS is through sorption to aerosol particles in the atmosphere. PFAS can be transferred from the sea surface to sea spray aerosol particles through wave breaking and bubble bursting, and PFAS emitted to the atmosphere in the gas phase can sorb to particulate matter through gas-particle partitioning. Here we present a comprehensive review of global measurements of PFAS on ambient particulate matter dating back to the first reports from the early 2000s. We summarize findings for the historically important C8 species, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), including detection of isomers and size-segregated measurements, as well as studies of newer and emerging PFAS. We conclude that long-term monitoring of PFAS on particulate matter should be expanded to include more measurement sites in under-sampled regions of the world and that further non-targeted work to identify novel PFAS structures is needed as PFAS manufacturing and regulations continue to evolve.

Evaluation of iodide chemical ionization mass spectrometry for gas and aerosol-phase per- and polyfluoroalkyl substances (PFAS) analysis

Per- and polyfluoroalkyl substances (PFAS) are a class of ultra-persistent anthropogenic contaminants. PFAS are ubiquitous in environmental and built systems, but very few online methods exist for their characterization in atmospheric gases and aerosols. Iodide time-of-flight chemical ionization mass spectrometry (iodide-ToF-CIMS) is a promising technology for online characterization of PFAS in the atmosphere. Previous work using iodide-ToF-CIMS was successful in measuring gas-phase perfluoroalkyl carboxylic acids and fluorotelomer alcohols, but those are just two of the myriad classes of PFAS that are atmospherically relevant. Therefore, our first objective was to test other sample introduction methods coupled to iodide-TOF-CIMS to evaluate its ability to measure a wider suite of PFAS in both gas and aerosol phases. Using a variety of sample introduction techniques, we successfully measured gas-phase fluorotelomer alcohols (FTOHs), gas and aerosol-phase perfluoroalkyl carboxylic acids (PFCAs), and aerosol-phase perfluoroalkyl sulfonic acids and polyfluoroalkyl phosphoric acid diesters (PFSAs and diPAPs). We also determined iodide-ToF-CIMS response factors for these compounds by introducing known quantities using a Filter Inlet for Gases and AEROsols (FIGAERO). These response factors ranged from 400 to 6 × 10⁴ ions per nanogram, demonstrating low limits of detection. Furthermore, PFAS are a poorly understood diverse class of molecules that exhibit unusual and often unexpected physicochemical properties due to their highly fluorinated nature. Since detection of PFAS with iodide-ToF-CIMS relies on the analyte molecule to either undergo proton transfer or adduct formation with iodide, understanding PFAS behavior during chemical ionization gives rise to a more fundamental understanding of these compounds. Through voltage scanning experiments and DFT calculations, we found that PFCAs and FTOHs readily form iodide adducts, while PFSAs and diPAPs preferentially undergo proton transfer to iodide. Generally, binding energy increased with increasing linear chain length, and PFCAs had stronger binding than FTOHs. Overall, our results suggest that iodide-ToF-CIMS can be used to measure even nonvolatile PFAS such as PFSAs and diPAPs in the aerosol phase in a semi-continuous online fashion.

Exploring controls on perfluorocarboxylic acid (PFCA) gas-particle partitioning using a model with observational constraints

The atmospheric fate of perfluorocarboxylic acids (PFCAs) has attracted much attention in recent decades due to the role of the atmosphere in global transport of these persistent chemicals. There is a gap in our understanding of gas-particle partitioning, limited by availability of reliable atmospheric measurements, partitioning properties, and models of gas-particle interactions. The gas-particle equilibrium phase partitioning of C2-C16 PFCAs in the atmosphere were modeled here by taking account of both deprotonation and phase partitioning equilibria among air, aerosol liquid water, and particulate water-insoluble organic matter using a range of available PFCA partitioning properties. We systematically varied water and organic matter content to simulate the full range of atmospheric conditions. Except in severe organic matter pollution episodes, shorter-chain PFCAs are predicted to mainly partition between air and aqueous phase, while for PFCAs with carbon chains longer than 12, organic matter is more likely to be the dominant particle phase reservoir. The model framework underestimated the particle fraction of C2-C8 PFCAs compared with several ambient observations, with larger discrepancies observed for longer-chain PFCAs. The discrepancy could result from externally mixed dust components, non-ideality of aerosol liquid water, surfactant descriptions at phase boundaries, and missed interactions between organic matter and charged PFCA molecules. Reliable measurements of ambient PFCAs with high time resolution and the measurement of uptake parameters by particle-relevant components will be beneficial to more reliable environmental fate modeling of ambient PFCAs.

Impacts of PFOAC8, GenXC6, and their mixtures on zebrafish developmental toxicity and gene expression provide insight about tumor-related disease

Concerns about per- and polyfluoroalkyl substances (PFASs) have grown in importance in the fields of ecotoxicology and public health. This study aims to compare the potential effects of long-chain (carbon atoms ≥ 7) and short-chain derivatives and their mixtures' exposure according to PFASs-exposed (1, 2, 5, 10, and 20 mg/L) zebrafish's (Danio rerio) toxic effects and their differential gene expression. Here, PFOA_C8, GenX_C6, and their mixtures (v/v, 1:1) could reduce embryo hatchability and increase teratogenicity and mortality. The toxicity of PFOA_C8 was higher than that of GenX_C6, and the toxicity of their mixtures was irregular. Their exposure (2 mg/L) caused zebrafish ventricular edema, malformation of the spine, blood accumulation, or developmental delay. In addition, all of them had significant differences in gene expression. PFOA_C8 exposure causes overall genetic changes, and the pathways of this transformation were autophagy and apoptosis. More importantly, in order to protect cells from PFOA_C8, GenX_C6, and their mixtures' influences, zebrafish inhibited the expression of ATPase and Ca²⁺ transport gene (atp1b2b), mitochondrial function-related regulatory genes (mt-co2, mt-co3, and mt-cyb), and tumor or carcinogenic cell proliferation genes (laptm4b and ctsbb). Overall, PFOA_C8, GenX_C6, and their mixtures' exposures will affect the gene expression effects of zebrafish embryos, indicating that PFASs may pose a potential threat to aquatic biological safety. These results showed that the relevant genes in zebrafish that were inhibited by PFASs exposure were related to tumorigenesis. Therefore, the effect of PFASs on zebrafish can be further used to study the pathogenesis of tumors.

Transport and transformation of perfluoroalkyl acids, isomer profiles, novel alternatives and unknown precursors from factories to dinner plates in China: New insights into crop bioaccumulation prediction and risk assessment

Perfluoroalkyl acids (PFAAs) are contaminants of global concern, and the inadvertent consumption of PFAA-contaminated crops may pose a threat to public health. Therefore, systematically studying their source tracing, bioaccumulation prediction and risk assessments in crops is an urgent priority. This study investigated the source apportionment and transport of PFAAs and novel fluorinated alternatives (collectively as per- and polyfluoroalkyl substances, PFASs) from factories to agricultural fields in a fluorochemical industrial region of China. Furthermore, bioaccumulation specificities and prediction of these chemicals in different vegetables were explored, followed by a comprehensive risk assessment from agricultural fields to dinner plates which considered precursor degradation. A positive matrix factorization model revealed that approximately 70 % of PFASs in agricultural soils were derived from fluorochemical manufacturing and metal processing. Alarming levels of ∑PFASs ranged 8.28-84.3 ng/g in soils and 163-7176 ng/g in vegetables. PFAS with short carbon chain or carboxylic acid group as well as branched isomers exhibited higher environmental transport potentials and bioaccumulation factors (BAFs) across a range of vegetables. The BAFs of different isomers of perfluorooctanoic acid (PFOA) decreased as the perfluoromethyl group moved further from the acid functional group. Hexafluoropropylene oxide dimer acid (GenX) showed relatively low BAFs, probably related to its ether bond with a high affinity to soil. Vegetables with fewer Casparian strips (e.g., carrot and radish), or more protein, possessed larger BAFs of PFASs. A bioaccumulation equation integrating critical parameters of PFASs, vegetables and soils, was built and corroborated with a good contamination prediction. After a total oxidizable precursors (TOP) assay, incremental perfluoroalkyl carboxylic acids (PFCAs) were massively found (325-5940 ng/g) in edible vegetable parts. Besides, precursor degradation and volatilization loss of PFASs was firstly confirmed during vegetable cooking. A risk assessment based on the TOP assay was developed to assist the protection of vegetable consumers.

Perfluoroalkyl acids in the aquatic environment of a fluorine industry-impacted region: Spatiotemporal distribution, partition behavior, source, and risk assessment

The present study investigated the temporal and spatial distributions, partition behaviors, sources, and risks of 14 perfluoroalkyl acids (PFAAs) in the aquatic environment of a fluorine industry-impacted region. The total concentrations of 14 PFAAs (ΣPFAAs) were 118.10-2235.4 ng/L, 40.00-2316.1 ng/g dw, and 6.90-180.5 ng/g dw in dissolved, suspended particle matter (SPM), and sedimentary phases, respectively. The predominant pollutants in the dissolved and SPM phases were perfluoroalkyl carboxylic acids (PFCAs) with carbon chain lengths <9, whereas C13 and C14 PFCAs accounted for a large proportion in the sedimentary phase. The dry season exhibited the highest concentration of ΣPFAAs in the dissolved phase (500.9 ± 350.2 ng/L), while the wet season showed the highest concentrations of ΣPFAAs in the SPM and sedimentary phases (591.6 ± 469.1 ng/g dw and 59.7 ± 35.5 ng/g dw, respectively). Significantly higher concentrations of PFAAs have been found in sewage plant and industrial areas. The concentration of PFAAs in the Xupu water source area (XPS) was slightly higher than that in other water source areas of the Yangtze River, which were either not affected or were less affected by the fluorine industry. The log K_D-SPM (distribution coefficient between SPM and water), log K_D-SED (distribution coefficient between sediment and water), and log K_OC-SED (the organic carbon normalized distribution coefficient) of PFAAs showed significant differences between the wet season and dry season, which may also be affected by carbon chain length. Source identification results showed that industries, wastewater discharge, and nonpoint sources were the main sources of PFAAs in this region. The ecological risk posed by long-chain PFAAs in aquatic organisms cannot be ignored, especially in areas with intensive industrial and agricultural activities. Health risks may exist for local toddlers with long-term exposure to perfluorooctanoic acid (PFOA) through drinking water intake and dermal contact.

Critical review on phytoremediation of polyfluoroalkyl substances from environmental matrices: Need for global concern

Poly- and perfluoroalkyl substances (PFAS) are a class of emerging organic contaminants that are impervious to standard physicochemical treatments. The widespread use of PFAS poses serious environmental issues. PFAS pollution of soils and water has become a significant issue due to the harmful effects of these chemicals both on the environment and public health. Owing to their complex chemical structures and interaction with soil and water, PFAS are difficult to remove from the environment. Traditional soil remediation procedures have not been successful in reducing or removing them from the environment. Therefore, this review focuses on new phytoremediation techniques for PFAS contamination of soils and water. The bioaccumulation and dispersion of PFAS inside plant compartments has shown great potential for phytoremediation, which is a promising and unique technology that is realistic, cost-effective, and may be employed as a wide scale in situ remediation strategy.

Poly- and Perfluoroalkyl Substances (PFAS) in Landfills: Occurrence, Transformation and Treatment

Landfills have served as the final repository for > 50 % municipal solid wastes in the United States. Because of their widespread uses and persistence in the environment, per- and polyfluoroalkyl substances (PFAS) (>4000 on the global market) are ubiquitously present in everyday consumer, commercial and industrial products, and have been widely detected in both closed (tens ng/L) and active (thousands to ten thousands ng/L) landfills due to disposal of PFAS-containing materials. Along with the decomposition of wastes in-place, PFAS can be transformed and released from the wastes into leachate and landfill gas. Consequently, it is critical to understand the occurrence and transformation of PFAS in landfills and the effectiveness of landfills, as a disposal alternative, for long-term containment of PFAS. This article presents a state-of-the-art review on the occurrence and transformation of PFAS in landfills, and possible effect of PFAS on the integrity of modern liner systems. Based on the data published from 10 countries (250 + landfills), C4-C7 perfluoroalkyl carboxylic acids were found predominant in the untreated landfill leachate and neutral PFAS, primarily fluorotelomer alcohols, in landfill air. The effectiveness and limitations of the conventional leachate treatment technologies and emerging technologies were also evaluated to address PFAS released into the leachate. Among conventional technologies, reverse osmosis (RO) may achieve a high removal efficiency of 90-100 % based on full-scale data, which, however, is vulnerable to the organic fouling and requires additional disposal of the concentrate. Implications of these knowledge on PFAS management at landfills are discussed and major knowledge gaps are identified.

Removal of Per-, Poly-fluoroalkyl substances (PFASs) and multi-biosphere community dynamics in a bacteria-algae symbiotic aquatic ecosystem

The presence of Per-, Poly-fluoroalkyl substances (PFASs) in aquatic ecosystems has drawn broad concerns in the scientific community due to their biological toxicity. However, little has been explored regarding PFASs' removal in phytoplankton-dominated environments. This study aimed to create a simulated bacteria-algae symbiotic ecosystem to observe the potential transportation of PFASs. Mass distributions showed that sand (63-2000 μm), silt & clay (0-63 μm), the phycosphere (>3 μm plankton), and the free-living biosphere (0.22-3 μm plankton) contained 19.00, 7.78, 5.73 and 2.75% PFASs in their total mass, respectively. Significant correlations were observed between carbon chain lengths and removal rates (R² = 0.822, p < 10^-4). Structural equation models revealed potential PFAS transportation pathways, such as water-phycosphere- free-living biosphere-sand-silt&clay, and water-sand-silt&clay (p < 0.05). The presence of PFASs decreased the bacterial density but increased algal density (p < 0.01) in the planktonic environment, and PFASs with longer carbon chain lengths showed a stronger enhancement in microbial community successions (p < 0.05). In algal metabolisms, chlorophyll-a and carotenoids were the key pigments that resisted reactive oxygen species caused by PFASs. PFBA (perfluorobutyric acid) (10.38-14.68%) and PFTeDA (perfluorotetradecanoic acid) (10.33-15.96%) affected bacterial metabolisms in phycosphere the most, while in the free-living biosphere was most effected by PFPeA (perfluorovaleric acid) (13.21-13.99%) and PFDoA (perfluorododecanoic acid) (10.04-10.50%). The results of this study provide new guidance measures for PFAS removal and management in aquatic environments.

Leachate decontamination through biological processes coupled to advanced oxidation: A review

The landfill leachate is considered a toxic effluent composed of recalcitrant contaminants that requires innovative alternatives for its decontamination. Coupling between advanced oxidation processes (AOPs) and aerobic biological treatments are highlighted in this research. Therefore, a bibliographic review of the research made from 2010 to 2021 was developed. These combined alternatives were applied in leachates, and it is oriented toward the analysis of knowledge gaps, trends, and future proposals of the treatment combined that contribute to researchers who wish to work on the subject. These kinds of treatments were chosen due to a bibliometric analysis made. Also, the information was searched in several scientific database. This work was found to be unpublished, as no reviews were found so far that agglomerate studies of coupling between photocatalytic and aerobic biological processes to treat leachates. Besides, AOPs are ideal for treating wastewater of complex composition, however, when it is used as the only treatment, they are usually unprofitable, which justifies their coupling with biological treatments. Subsequently, it was determined that the knowledge main gap is the lack of documentation of treatment costs, which makes it difficult to implement on a real scale. In addition to this, the couplings trends are toward doping with metallic and nonmetallic ions of the catalyst used in the photocatalytic process to improve the efficiency of these. Finally, future research should work on finding alternatives that allow the optimization of the resources used in the combined systems and on promoting the recovery of existing products in the leachate.Implications: Leachates generate several environmental impacts due to their toxic composition. Even when coupling between heterogeneous photocatalysis and biologic treatment can solve them, issues like cost analysis and the scaling-up factor have not been developed, and futures researchers should work on that. Besides, the trend founded in almost all investigations was the catalyst doping with metals and nonmetals ions, particularly when they use TiO2 because it gives the possibility of improving efficiencies just with a structural variation. Finally, these treatment combinations require more analyses and comparison of their remotion over emerging pollutants and their performance with new designs.

Occurrence and distribution of organic ultraviolet absorbents in soils and plants from a typical industrial area in South China

Organic ultraviolet absorbents (UVAs) have attracted increasing concern due to their ubiquity, bioaccumulation, and potential toxicity. However, available information on their occurrence and transfer in terrestrial environment is still extremely insufficient. In this study, we investigated twelve UVAs in the soils and five terrestrial plant species from a typical industrial area in South China, and found their total concentrations were 5.87-76.1 (median 13.1) and 17.9-269 (median 82.9) ng/g dry weight, respectively. Homosalate was dominant in soils while benzophenone and octrizole were predominant in plants, likely due to their complex sources and bioaccumulation preferences. The bioaccumulation factors (BAFs) were further evaluated based on the ratios of UVA concentrations in plants and soils. The observed BAFs of UVAs were compound and species-specific, and most of them were much >1.0, indicating the chemicals could be transferred from soils to plants. To the best of our knowledge, this is the first report of organic UVAs in field soil-plant systems, providing information that may improve our understanding of the bioaccumulability of these chemicals in terrestrial environment and the associated risks. More studies are needed to investigate the transfer and bioaccumulation of such chemicals in soils and terrestrial biota.