Per- and Polyfluoroalkyl Substances in Swedish Groundwater and Surface Water: Implications for Environmental Quality Standards and Drinking Water Guidelines

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Characterization of per- and polyfluoroalkyl substances (PFAS) and other constituents in MSW landfill leachate from Puerto Rico

Elevated per- and polyfluoroalkyl substance (PFAS) concentrations have been reported in municipal solid waste (MSW) landfill leachate with higher levels in wet and warmer subtropical climates. Information about landfill leachate characteristics is much more limited in tropical climates. In this study, 20 landfill leachate samples were collected from three MSW landfills on the tropical island of Puerto Rico and results were compared against landfills nationally and within Florida, USA. The samples collected in Puerto Rico underwent physical-chemical analysis, as well as a quantitative analysis of 92 PFAS. Samples described in this study include discrete leachate types, such as leachate, gas condensate, and leachate which has undergone on-site treatment (e.g., RO treatment, phytoremediation, lagoons). A total of 51 PFAS were detected above quantitation limits, including perfluorohexylphosphonic acid, a perfluoroalkyl acid (PFAA) which has not been reported previously in landfill leachate. ∑PFAS concentrations in this study (mean: 38,000 ng L-1), as well as concentrations of individual PFAS, are significantly higher than other reported MSW landfill leachate concentrations. The profiles of leachates collected from on-site treatment systems indicate possible transformation of precursor PFAS as a result of treatment processes - oxidizing conditions, for example, may facilitate aerobic transformation, increase the concentrations of PFAAs, and possibly increase the apparent ∑PFAS concentration. Extreme climate events, including rising temperatures and more frequent hurricanes, have placed additional strain on the solid waste management infrastructure on the island - adding complexity to an already challenging PFAS management issue. As concern grows over PFAS contamination in drinking water, these findings should inform solid waste and leachate management decisions in order to minimize PFAS emissions in island environments.

Distribution of per- and polyfluoroalkyl substances in blood, serum, and urine of patients with liver cancer and associations with liver function biomarkers

Studies have shown that per- and polyfluoroalkyl substances (PFASs) may be hepatotoxic in animals or humans. However, data on clinical epidemiology are very limited. In this study, 21 PFASs were determined in patients with liver diseases, with the highest median concentrations detected in the serum sample (26.7 ng/mL), followed by blood (10.7 ng/mL) and urine (5.02 ng/mL). Higher total PFAS concentrations were found in hepatocellular carcinoma (HCC) patients compared to non-HCC patients, with significant discrepancies in serum and blood samples. Besides, significant correlations were also found among PFAS concentrations and age, gender, body mass index (BMI), and liver function biomarkers levels. For example, PFAS concentrations are significantly higher in males than in females; Several serum PFASs concentrations increase with age and BMI, while the serum perfluorohexane sulfonic acid (PFHxS) concentrations are negatively correlated with age. In addition, multiple regression models adjusted for age, gender and BMI found that increased serum perfluorobutane sulfonic acid (PFBS), perfluoroheptane sulfonic acid (PFHpS) and perfluorohexylphosphonic acid (PFHxPA) conentrations are correlated with elevated alkaline phosphatase (ALP), aspartate aminotransferase (AST), and alpha-fetoprotein (AFP) (p < 0.05). Our results provide epidemiological support for the future study on the potential clinical hepatotoxicity of PFAS.

Macronutrient and PFOS bioavailability manipulated by aeration-driven rhizospheric organic nanocapsular assembly

Ubiquitous presence of the extremely persistent pollutants, per- and polyfluoroalkyl substances, is drawing ever-increasing concerns for their high eco-environmental risks which, however, are insufficiently considered based on the assembly characteristics of those amphiphilic molecules in environment. This study investigated the re-organization and self-assembly of perfluorooctane sulfonate (PFOS) and macronutrient molecules from rhizospheric organic (RhO) matter induced with a common operation of aeration. Atomic force microscopy (AFM) with infrared spectroscopy (IR)-mapping clearly showed that, after aeration and stabilization, RhO nanocapsules (∼ 1000 nm or smaller) with a core of PFOS-protein complexes coated by "lipid-carbohydrate" layers were observed whereas the capsule structure with a lipid core surrounded by "protein-carbohydrate-protein" multilayers was obtained in the absence of PFOS. It is aeration that exerted the disassociation of pristine RhO components, after which the environmental concentration PFOS restructured the self-assembly structure in a conspicuous "disorder-to-order" transition. AFM IR-mapping analysis of faeces combined with quantification of component uptake denoted the decreased ingestion and utilization of both PFOS and proteins compared with lipids and carbohydrates when Daphnia magna were fed with RhO nanocapsules. RhO nanocapsules acted as double-edged swords via simultaneously impeding the bioaccessibility of hazardous PFOS molecules and macronutrient proteins; and the latter might be more significant, which caused a malnutrition status within merely 48 h. Elucidating the assembly structure of natural organic matter and environmental concentration PFOS, the finding of this work could be a crucial supplementation to the high-dose-dependent eco-effect investigations on PFOS.

Distribution characteristics and transformation mechanism of per- and polyfluoroalkyl substances in drinking water sources: A review

Per- and polyfluoroalkyl substances (PFASs) have raised significant concerns within the realm of drinking water due to their widespread presence in various water sources. This prevalence poses potential risks to human health, ecosystems, and the safety of drinking water. However, there is currently a lack of comprehensive reviews that systematically categorize the distribution characteristics and transformation mechanisms of PFASs in drinking water sources. This review aims to address this gap by concentrating on the specific sources of PFASs contamination in Chinese drinking water supplies. It seeks to elucidate the migration and transformation processes of PFASs within each source, summarize the distribution patterns of PFASs in surface and subsurface drinking water sources, and analyze how PFASs molecular structure, solubility, and sediment physicochemical parameters influence their presence in both the water phase and sediment. Furthermore, this review assesses two natural pathways for PFASs degradation, namely photolysis and biodegradation. It places particular emphasis on understanding the degradation mechanisms and the factors that affect the breakdown of PFASs by microorganisms. The ultimate goal is to provide valuable insights for the prevention and control of PFAS contamination and the assurance of drinking water quality.

Sorption of per- and poly-fluoroalkyl substances and their precursors on activated carbon under realistic drinking water conditions: Insights into sorbent variability and PFAS structural effects

Recent stringent drinking water quality standards create challenges for water utilities to meet these standards. Advanced treatment techniques will have to be applied on many drinking water production locations to meet these quality standards. This study investigated the sorption of per- and polyfluorinated-alkyl substances (PFAS) onto granular activated carbon (GAC). The study was performed at environmentally relevant PFAS concentrations and a realistic water-to-GAC ratio, providing a realism often overlooked in existing studies. Three different forms of GAC were evaluated, differing in micropore and mesopore structures. Tap water spiked with 5 ng/L of each of 31 PFAS was used in the sorption experiments, i.e. perfluorocarboxylic acids (C4-C12), perfluorosulfonic acids (PFSA, C5-C10) including linear and branched isomers, and three groups of PFAS precursors (per-/polyfluoroalkyl ether acids, sulfonamides, and sulfonamide acetic acids). The three studied GAC did not exhibit distinct differences in PFAS sorption. The removal of PFAS was below 50 % for most studied PFAS, except for the short-chain PFAS precursors. Sorption was affected by both the carbon chain length and functional groups for PFAS, while this was not observed for PFAS precursors. The presence of ether linkages and sulfonamide groups notably enhanced sorption. Linear and branched PFSA demonstrated similar sorption behavior, whereas branched isomers of the sulfonamide acetic acid precursors exhibited significantly higher sorption. This indicates that sorption was determined by both hydrophobic and electrostatic interactions. Given the relatively low PFAS removal by GAC under environmentally relevant test conditions, further improvements in sorbents are required to ensure that PFAS concentrations in produced drinking water comply with drinking water standards.

Hunting the missing fluorine in aqueous film-forming foams containing per- and polyfluoroalkyl substances

Since aqueous film-forming foams (AFFFs) are major sources of per- and polyfluoroalkyl substances (PFAS), understanding the quantity and type of PFAS present in AFFFs is crucial for assessing environmental risk and remediation. We characterized 25 foams from Canada and Europe, including two non-AFFFs and two fluorine-free AFFFs. We used liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) to identify novel PFAS, as well as total oxidizable precursor assays (TOP) and total organofluorine (TOF) measurements for comparison. LC-HRMS showed that the two non-AFFF foams and two PFAS-free AFFFs contained little or no PFAS, confirmed by TOF measurement using combustion ion chromatography (CIC). The PFAS-containing AFFFs, however, spanned a wide concentration range of TOF (2200-45,000 mg F/L) and contained 22 new classes of polyfluoroalkyl substances not previously reported. As a result of identifying new compounds, LC-HRMS was fully able to capture the oxidizable precursors determined by TOP assay in all tested fluorotelomer (FT) AFFFs, while unknown compounds still constituted a significant fraction (19-53 mol%) in most electrochemical fluorination (ECF) AFFFs. A fluorine mass balance was achieved by comparing the amounts of compounds identified by LC-HRMS with those detected by CIC, although LC-HRMS overestimated TOF with a recovery of 127 ± 36%.

Background concentrations and spatial distribution of PFAS in surface waters and sediments of the greater Melbourne area, Australia

A survey of per- and polyfluoroalkyl substances (PFAS) was conducted in Melbourne, Australia to determine background concentrations in residential, industrial, municipal wastewater treatment plants, and rural land uses. Surface water and sediment samples collected from 65 sites with different catchment land uses were analysed for thirty-three PFAS. Twenty-two out of thirty-three targeted PFAS were detected, with at least one PFAS species was detected in 98% water samples and 8% sediment samples. One site was determined to have point-source pollution from an airport (surface water Σ33PFAS = 4261 ng/L) and was excluded from statistical analyses. The median Σ33PFAS concentration in surface water was 63.5 ng/L and the average was 78.6 ng/L (range < DL-526 ng/L). PFAS species with the highest median concentrations were PFBA (11.3 ng/L), PFHxA (9.2 ng/L), PFOA (8.3 ng/L), PFOS (8.0 ng/L), PFPeA (7.5 ng/L), PFHpA (3.2 ng/L), and PFHxS (2.9 ng/L). The average Σ4PFAS in sediments was 0.35 ng/g d.w. (range = Collapse

Key Words

• FTS
• Land use
• PFAS
• PFOA
• PFOS
• Urban

Collapse

MESH Headings

• Environmental Monitoring
• Water Pollutants, Chemical/analysis
• Fluorocarbons/analysis
• Hydrocarbons, Fluorinated/analysis
• Water/analysis
• Australia
• Alkanesulfonic Acids/analysis

Collapse

Grants Collapse

Affiliation(s)

Tanya Paige Aquatic Environmental Stress (AQUEST) Research Group, RMIT University, PO Box 71, Bundoora, Victoria, 3083, Australia.
Thishakya De Silva National Measurement Institute, 1/153 Bertie St, Port Melbourne, Victoria, 3207, Australia
Saman Buddhadasa National Measurement Institute, 1/153 Bertie St, Port Melbourne, Victoria, 3207, Australia
Shiva Prasad National Measurement Institute, 105 Delhi Rd, North Ryde, NSW, 2113, Australia
Dayanthi Nugegoda Aquatic Environmental Stress (AQUEST) Research Group, RMIT University, PO Box 71, Bundoora, Victoria, 3083, Australia
Vincent Pettigrove Aquatic Environmental Stress (AQUEST) Research Group, RMIT University, PO Box 71, Bundoora, Victoria, 3083, Australia

Collapse

A critical review of perfluoroalkyl and polyfluoroalkyl substances (PFAS) landfill disposal in the United States

Landfills manage materials containing per- and polyfluoroalkyl substances (PFAS) from municipal solid waste (MSW) and other waste streams. This manuscript summarizes state and federal initiatives and critically reviews peer-reviewed literature to define best practices for managing these wastes and identify data gaps to guide future research. The objective is to inform stakeholders about waste-derived PFAS disposed of in landfills, PFAS emissions, and the potential for related environmental impacts. Furthermore, this document highlights data gaps and uncertainties concerning the fate of PFAS during landfill disposal. Most studies on this topic measured PFAS in liquid landfill effluent (leachate); comparatively fewer have attempted to estimate PFAS loading in landfills or other effluent streams such as landfill gas (LFG). In all media, the reported total PFAS heavily depends on waste types and the number of PFAS included in the analytical method. Early studies which only measured a small number of PFAS, predominantly perfluoroalkyl acids (PFAAs), likely report a significant underestimation of total PFAS. Major findings include relationships between PFAS effluent and landfill conditions - biodegradable waste increases PFAS transformation and leaching. Based on the results of multiple studies, it is estimated that 84% of PFAS loading to MSW landfills (7.2 T total) remains in the waste mass, while 5% leaves via LFG and 11% via leachate on an annual basis. The environmental impact of landfill-derived PFAS has been well-documented. Additional research is needed on PFAS in landfilled construction and demolition debris, hazardous, and industrial waste in the US.

Low concentrations of perfluoroalkyl acids (PFAAs) in municipal drinking water associated with serum PFAA concentrations in Swedish adolescents

While highly contaminated drinking water (DW) is a major source of exposure to perfluoroalkyl acids (PFAAs), the contribution of low-level contaminated DW (i.e. < 10 ng/L of individual PFAAs) to PFAA body burdens has rarely been studied. To address this knowledge gap, we evaluated the association between concentrations of perflurooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorohexane sulfonic acid (PFHxS) and perfluorooctane sulfonic acid (PFOS), and their sum (∑4PFAAs) in DW and serum in Swedish adolescents using weighted least squares regression. We paired serum PFAA concentrations in adolescents (age 10-21 years, n = 790) from the dietary survey Riksmaten Adolescents 2016-17 (RMA) with mean PFAA concentrations in water samples collected in 2018 from waterworks (n = 45) supplying DW to the participant residential and school addresses. The median concentrations of individual PFAAs in DW were < 1 ng/L. Median concentrations of PFNA and PFHxS in serum were < 1 ng/g, while those of PFOA and PFOS were 1-2 ng/g. Significant positive associations between PFAA concentrations in DW and serum were found for all four PFAAs and ∑4PFAAs, with estimated serum/DW concentration ratios ranging from 210 (PFOA) to 670 (PFHxS), taking exposure from sources other than DW (background) into consideration. The mean concentrations of PFHxS and ∑4PFAA in DW that would likely cause substantially elevated serum concentrations above background variation were estimated to 0.9 ng/L and 2.4 ng/L, respectively. The European Food Safety Authority has determined a health concern concentration of 6.9 ng ∑4PFAAs/mL serum. This level was to a large degree exceeded by RMA participants with DW ∑4PFAA concentrations above the maximum limits implemented in Denmark (2 ng ∑4PFAAs/L) and Sweden (4 ng ∑4PFAAs/L) than by RMA participants with DW concentrations below the maximum limits. In conclusion, PFAA exposure from low-level contaminated DW must be considered in risk assessment for adolescents.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

Avoiding artifacts in the determination of per- and polyfluoroalkyl substance sorbent-water distribution

Characterizing sorbent affinity for a target compound (described by sorbent-water distribution coefficient, Ksw) is a necessary step in the sorbent selection and performance-testing process in the process of capturing aquatic contaminants. However, no standardized procedure exists to measure Ksw, and studies display significant variations in set-up and performance. For per- and polyfluoroalkyl substances (PFAS), most Ksw determinations employ batch experiments with small-scale water-sorbent mixtures, methanol-based spike of target compound(s), and analysis after assumed equilibrium, but methodological details of the above procedure differ and might cause artifacts in the determination of Ksw. We conducted several batch experiments systematically varying a general procedure to characterize effects of sub-optimal experimental design. Using a selection of PFAS (6-carbon fluorinated chain length with differing functional groups) and two sorbents, we tested variations of solution:sorbent ratio, methanol content, and PFAS initial concentration, and compared derived Ksw values. Each methodological component affected log(Ksw), usually by suppressing the value (by 0-48%) when compared with a "best design" procedure. Thus, we suggest (1) a reference procedure for PFAS and sorbents used here, and (2) general guidelines for batch experiment design with different compounds and sorbents. Additionally, we report well-constrained Ksw values for 23 PFAS and two sorbents.

Presence of Perfluoroalkyl Substances in Landfill Adjacent Surface Waters in North Carolina

Landfills pose an important public health risk, especially in historically disenfranchised communities that are disproportionately sited for landfills and in rural areas where private wells may be impacted. Landfills are major sources of perfluoroalkyl substances (PFAS) that migrate into the surrounding environment. This study characterized PFAS in surface waters adjacent to two landfills, one in Sampson County (SC) and one in Orange County (OC) in North Carolina. In addition to municipal solid waste and construction and demolition waste, the landfill in SC accepts industrial sludge from a chemical plant that produces proprietary PFAS. Over four months, 35 surface water samples were collected at upstream, landfill-adjacent, and downstream/downgradient sites. Thirty-four PFAS were analyzed using liquid chromatography with tandem mass spectroscopy. Of those, six novel and six legacy PFAS were detected. Legacy PFAS were detected in surface water near both landfills, with the highest concentrations adjacent to the landfill. Novel PFAS were only detected in surface water near the SC landfill and showed the highest concentrations adjacent to the landfill, indicating offsite migration of PFAS. These findings support the need for more comprehensive and frequent monitoring of groundwater and surface water wells near landfills and stricter regulation regarding the landfilling of industrial materials.

Hazard screening of contaminants of emerging concern (CECs) in Sweden's three largest lakes and their associated rivers

Persistent, mobile, and toxic (PMT) substances have recently garnered increased attention by environmental researchers, the water sector and environmental protection agencies. In this study, acute and chronic species sensitivity distributions (SSDs) were retrieved from literature data for previously quantified contaminants of emerging concern (CECs) in Swedish surface waters (n = 92) and risk quotients (RQ) were calculated. To better understand the characteristics of the detected CECs in non-urban lake sites (n = 71), these compounds were checked against established criteria for potentially toxic PMs (PM(T)s) and occurrence in the aquatic environment, respectively. For the CECs with missing SSDs (n = 15 [acute], n = 41 [chronic]), ecotoxicity data were extracted for eight taxonomic groups, and if data were sufficient (n ≥ 3), SSDs were derived. The retrieved and newly developed SSDs were then used in an environmental hazard assessment (EHA) in the investigated Swedish rivers and lakes. In the rivers, 8 CECs had RQ> 1 in at least one location, and 20 CECs posed a moderate risk (0.01 < RQ < 1). In total, 21 of the 71 detected substances had already been identified as PM(T)/vPvM substances. Our study shows the importance of studying field data at large spatial scale to reveal potential environmental hazards far from source areas.

Occurrence of per- and polyfluoroalkyl substances in aquatic environments and their removal by advanced oxidation processes

Per- and polyfluoroalkyl substances (PFAS), one of the main categories of emerging contaminants, are a family of fluorinated organic compounds of anthropogenic origin. PFAS can endanger the environment and human health because of their wide application in industries, long-term persistence, unique properties, and bioaccumulation potential. This study sought to explain the accumulation of different PFAS in water bodies. In aquatic environments, PFAS concentrations range extensively from <0.03 (groundwater; Melbourne, Australia) to 51,000 ng/L (Groundwater, Sweden). Additionally, bioaccumulation of PFAS in fish and water biota has been stated to range from 0.2 (Burbot, Lake Vättern, Sweden) to 13,900 ng/g (Bluegill samples, U.S.). Recently, studies have focused on PFAS removal from aqueous solutions; one promising technique is advanced oxidation processes (AOPs), including microwaves, ultrasound, ozonation, photocatalysis, UV, electrochemical oxidation, the Fenton process, and hydrogen peroxide-based and sulfate radical-based systems. The removal efficiency of PFAS ranges from 3% (for MW) to 100% for UV/sulfate radical as a hybrid reactor. Therefore, a hybrid reactor can be used to efficiently degrade and remove PFAS. Developing novel, efficient, cost-effective, and sustainable AOPs for PFAS degradation in water treatment systems is a critical area of research.

Emission of Per- and Polyfluoroalkyl Substances from a Waste-to-Energy Plant─Occurrence in Ashes, Treated Process Water, and First Observation in Flue Gas

Per- and polyfluoroalkyl substances (PFASs) are a large group of compounds commonly used as industrial chemicals and constituents of consumer products, e.g., as surfactants and surface protectors. When products containing PFASs reach their end of life, some end up in waste streams sent to waste-to-energy (WtE) plants. However, the fate of PFASs in WtE processes is largely unknown, as is their potential to enter the environment via ash, gypsum, treated process water, and flue gas. This study forms part of a comprehensive investigation of the occurrence and distribution of PFASs in WtE residues. Sampling was performed during incineration of two different waste mixes: normal municipal solid waste incineration (MSWI) and incineration of a waste mix with 5-8 wt % sewage sludge added to the MSWI (referred to as Sludge:MSWI). PFASs were identified in all examined residues, with short-chain (C4-C7) perfluorocarboxylic acids being the most abundant. Total levels of extractable PFASs were higher during Sludge:MSWI than during MSWI, with the total annual release estimated to be 47 and 13 g, respectively. Furthermore, PFASs were detected in flue gas for the first time (4.0-5.6 ng m^-3). Our results demonstrate that some PFASs are not fully degraded by the high temperatures during WtE conversion and can be emitted from the plant via ash, gypsum, treated process water, and flue gas.

Suspect screening and total oxidizable precursor (TOP) assay as tools for characterization of per- and polyfluoroalkyl substance (PFAS)-contaminated groundwater and treated landfill leachate

Landfill facilities are a major source of release of per- and polyfluoroalkyl substances (PFAS) to the surrounding environment. In this study, landfill leachate treated in a conventional wastewater treatment plant and PFAS-contaminated groundwater were subjected to suspect screening analysis and semi-quantification using total oxidizable precursor (TOP) assay and liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS). TOP assays yielded expected results for legacy PFAS and their precursors, but showed no discernible evidence of degradation of perfluoroethylcyclohexane sulfonic acid. TOP assays also produced significant evidence of presence of precursors in both treated landfill leachate and groundwater, but the majority of precursors had probably degraded into legacy PFAS after many years in the landfill. Suspect screening identified a total of 28 PF AS, of which six were not included in the targeted method and were identified with confidence level (CL) ≥3. Semi-quantification of these six compounds showed very low concentrations, indicating that they are not as great a concern as the target PFAS.

Ecotoxicity Evaluation of Fire-Extinguishing Water from Large-Scale Battery and Battery Electric Vehicle Fire Tests

Electrified transport has multiple benefits but has also raised some concerns, for example, the flammable formulations used in lithium-ion batteries. Fires in traction batteries can be difficult to extinguish because the battery cells are well protected and hard to reach. To control the fire, firefighters must prolong the application of extinguishing media. In this work, extinguishing water from three vehicles and one battery pack fire test were analyzed for inorganic and organic pollutants, including particle-bound polycyclic aromatic hydrocarbons and soot content. Additionally, the acute toxicity of the collected extinguishing water on three aquatic species was determined. The vehicles used in the fire tests were both conventional petrol-fueled and battery electric. For all of the tests, the analysis of the extinguishing water showed high toxicity toward the tested aquatic species. Several metals and ions were found in concentrations above the corresponding surface water guideline values. Per- and polyfluoroalkyl substances were detected in concentrations ranging between 200 and 1400 ng L^-1. Flushing the battery increased the concentration of per- and polyfluoroalkyl substances to 4700 ng L^-1. Extinguishing water from the battery electric vehicle and the battery pack contained a higher concentration of nickel, cobalt, lithium, manganese, and fluoride compared with the water samples analyzed from the conventional vehicle.

Occurrence, Fate, and Related Health Risks of PFAS in Raw and Produced Drinking Water

This study investigates human exposure to per- and polyfluoroalkyl substances (PFAS) via drinking water and evaluates human health risks. An analytical method for 56 target PFAS, including ultrashort-chain (C2-C3) and branched isomers, was developed. The limit of detection (LOD) ranged from 0.009 to 0.1 ng/L, except for trifluoroacetic-acid and perfluoropropanoic-acid with higher LODs of 35 and 0.24 ng/L, respectively. The method was applied to raw and produced drinking water from 18 Dutch locations, including groundwater or surface water as source, and applied various treatment processes. Ultrashort-chain (300 to 1100 ng/L) followed by the group of perfluoroalkyl-carboxylic-acids (PFCA, ≥C4) (0.4 to 95.1 ng/L) were dominant. PFCA and perfluoroalkyl-sulfonic-acid (≥C4), including precursors, showed significantly higher levels in drinking water produced from surface water. However, no significant difference was found for ultrashort PFAS, indicating the need for groundwater protection. Negative removal of PFAS occasionally observed for advanced treatment indicates desorption and/or degradation of precursors. The proportion of branched isomers was higher in raw and produced drinking water as compared to industrial production. Drinking water produced from surface water, except for a few locations, exceed non-binding provisional guideline values proposed; however, all produced drinking waters met the recent soon-to-be binding drinking-water-directive requirements.

EI/IOT of PFCs: Environmental impacts/interactions, occurrences, and toxicities of perfluorochemicals

Various studies have been conducted on the perfluorochemicals (PFCs) family over the years. These compounds have been sought in various industrial aspects involving the synthesis of everyday utilities due to their broad range of applications. As a result, PFCs have built up in the environment, causing concern. The presence of PFCs in various environmental media, such as terrestrial and marine settings, as well as the mechanisms of transport, bioaccumulation, and physio-chemical interactions of PFCs within plants, aquatic organisms, microplastics, and, ultimately, the human body, are discussed in this review, which draws on a variety of research publications. The interaction of PFCs with proteins, translocation, and adsorption by hydrophobic interactions were observed, and this had an impact on the natural functioning of biological processes, resulting in events such as phylogenic clustering, competitive inhibition, and many others, posing potential hazards to human health and other relevant organisms in the ecosystem. However, further research is needed to have a better knowledge of PFCs and their interactions so that low-cost treatments can be developed to eliminate them. It is therefore, future research should focus on the role of soil matrix as a defensive mechanism for PFCs, as well as the impact of PFC chain length rejection.

A critical review of the occurrence, fate and treatment of per- and polyfluoroalkyl substances (PFASs) in landfills

The aim of this critical review is i) to summarize the occurrence of Per- and polyfluoroalkyl substances (PFASs) in landfills; ii) to outline the environmental fate and transport of PFASs in landfills; iii) to compare the treatment technologies of PFASs in landfill leachate and remediation methods of PFASs in surrounding groundwater; iv) to identify the research gaps and suggest future research directions. In recent years, PFASs have been detected in landfills around the world, among which Perfluoroalkyl acids (PFAAs) especially Perfluorooctanoic acid (PFOA) and Perfluorooctane sulfonic acid (PFOS) are mostly studied due to their long-term stability. Short-chain PFASs (<8 carbons) are more common than long-chain PFASs (≧8 carbons) in landfill leachate. PFASs in landfill leachate are eventually transported to the surrounding groundwater, surface water and soil. Some PFASs evaporate from landfills to the ambient air. To avoid the environmental and health risks of PFASs in landfills, new technologies and combined use of existing technologies have been implemented to treat PFASs in landfill leachate. Integrated remediation methods are applied to control the diffusion of PFASs in groundwater surrounding landfills. In future, the mechanisms of PFAAs precursors degradation, the correlation among PFASs in different environmental media around landfills, as well as the environmental behavior and toxic effect of combined pollutants together with PFASs in landfill leachate and surrounding groundwater should be studied.

Occurrence and behavior of per- and polyfluoroalkyl substances and conversion of oxidizable precursors in the waters of coastal tourist resorts in China

Per- and polyfluorolkyl substances (PFAS) were measured in the water and fish from 20 coastal tourist resorts in China, to investigate their sources, seasonal differences, and bioconcentration. An oxidative method with hydroxyl radicals was used to extract potential perfluoroalkyl acid (PFAA) precursors in the water of resorts. The results indicated that the total concentrations of target chemicals (i.e., ΣPFAS) in the original water were 59.4-138, 32.7-77.2, and 14.6-29.9 ng L^-1 in December, April, and August, respectively. C₄-C₁₀ perfluorocarboxlate (PFCA) and perfluorooctane sulfonate (PFOS) accounted for 67%-92% of the ΣPFAS contents in all water samples. The PFAS concentrations in the muscles and liver of fish were 16.0-162 ng g^-1 ww and 186-1240 ng g^-1 ww, respectively. The dominant compounds were perfluorobutanoate acid (PFBA) and PFOS in the water, and perfluorooctanoic acid (PFOA) and PFOS in fish tissues. High bioconcentration were observed for PFCA (C ≥ 8) and perfluorosulfonate (PFSA, C ≥ 6). After oxidative conversion, the water exhibited a noticeable increase in the ΣPFAS value. Precursors that generated C₄-C₉ PFCA were more prevalent than precursors that generated other PFCA upon oxidation. The concentration of C₈-based precursor was higher than that of C₆-based precursor in wet and dry seasons. This study is the first to apply an oxidative method to investigate PFAS pollution in the water of coastal tourist resorts. The results verified that PFAA precursors exist in the water of coastal tourist resorts, and more attention should be given to the existence of PFAA precursors and the safety of water in coastal tourist resorts.

The Need for Testing Isomer Profiles of Perfluoroalkyl Substances to Evaluate Treatment Processes

Many environmentally relevant poly-/perfluoroalkyl substances (PFASs) including perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) exist in different isomeric (branched and linear) forms in the natural environment. The isomeric distribution of PFASs in the environment and source waters is largely controlled by the source of contamination and varying physicochemical properties imparted by their structural differences. For example, branched isomers of PFOS are relatively more reactive and less sorptive compared to the linear analogue. As a result, the removal of branched and linear PFASs during water treatment can vary, and thus the isomeric distribution in source waters can influence the overall efficiency of the treatment process. In this paper, we highlight the need to consider the isomeric distribution of PFASs in contaminated matrices while designing appropriate remediation strategies. We additionally summarize the known occurrence and variation in the physicochemical properties of PFAS isomers influencing their detection, fate, toxicokinetics, and treatment efficiency.

Pollutant source or sink? Adsorption and mobilization of PFOS and PFOA from sediments in a large shallow lake with extended reed belt

In this study, we i) assessed the occurrence of perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) in sediments, pore water, and bulk water from three different areas in Lake Neusiedl, Austria, and ii) investigated mechanisms regulating adsorption and remobilization of these substances under different conditions via multiple lab-scale experiments. The adsorption capacity was mainly influenced by sediments' organic matter content, oxide composition, and pre-loading. Results suggest that a further increase of PFAS-concentrations in the open lake can be partly buffered by sediment transport to the littoral zone and adsorption to sediments in the extended reed belt. But, under current conditions, the conducted experiments revealed a real risk for mobilization of PFOS and PFOA from reed belt sediments that may lead to their transport back into the lake. The amount of desorbed PFAS is primarily dependent on water/sediment- or pore water/water-ratios and the concentration gradient. In contrast, water matrix characteristics and oxygen levels played a minor role in partitioning. The highest risk for remobilizing PFOS and PFOA was observed in experiments with sediments taken near the only major tributary to the lake (river Wulka), which had the highest pre-loading. The following management advice for water transport between high and low polluted areas can be derived based on the results. First, to reduce emissions into Lake waters from polluted tributaries like the Wulka river, we recommend diffuse pathways through the reed belt in the lake's littoral to reduce pollutant transport into the Lake and avoid high local sediment loadings. Second, water exchange with dried-up areas with probable higher loadings should be carefully handled and monitored to avoid critical back transport in the open lake. And third, general work in the reed belt or generally in the reed should be accompanied by monitoring to prevent uncontrolled remobilization in the future.

Long-distance transport of per- and polyfluoroalkyl substances (PFAS) in a Swedish drinking water aquifer

Use of per- and polyfluoroalkyl substance (PFAS)-containing aqueous film-forming foams (AFFF) at firefighting training sites (FFTS) has been linked to PFAS contamination of drinking water. This study investigated PFAS transport and distribution in an urban groundwater aquifer used for drinking water production that has been affected by PFAS-containing AFFF. Soil, sediment, surface water and drinking water were sampled. In soil (n = 12) at a FFTS with high perfluorooctane sulfonate (PFOS) content (87% of ∑PFAS), the ∑PFAS concentration (n = 26) ranged from below detection limit to 560 ng g^-1 dry weight. In groundwater (n = 28), the ∑PFAS concentration near a military airbase FFTS reached 1000 ng L^-1. Principal component analysis (PCA) identified the military FFTS as the main source of PFAS contamination in drinking water wellfields >10 km down-gradient. Groundwater samples taken close to the military FFTS site showed no ∑PFAS concentration change between 2013 and 2021, while a location further down-gradient showed a transitory 99.6% decrease. Correlation analysis on PFAS composition profile indicated that this decrease was likely caused by dilution from an adjacent conflating aquifer. ∑PFAS concentration reached 15 ng L^-1 (PFOS 47% and PFHxS 41% of ∑PFAS) in surface river water (n = 6) and ranged between 1 ng L^-1 and 8 ng L^-1 (PFHxS 73% and PFBS 17% of ∑PFAS) in drinking water (n = 4). Drinking water had lower PFAS concentrations than the wellfields due to PFAS removal at the water treatment plant. This demonstrates the importance of monitoring PFAS concentrations throughout a groundwater aquifer, to better understand variations in transport from contamination sources and resulting impacts on PFAS concentrations in drinking water extraction areas.

Global distributions, source-type dependencies, and concentration ranges of per- and polyfluoroalkyl substances in groundwater

A meta-analysis was conducted of published literature reporting concentrations of per- and polyfluoroalkyl substances (PFAS) in groundwater for sites distributed in 20 countries across the globe. Data for >35 PFAS were aggregated from 96 reports published from 1999 to 2021. The final data set comprises approximately 21,000 data points after removal of time-series and duplicate samples as well as non-detects. The reported concentrations range over many orders of magnitude, from ng/L to mg/L levels. Distinct differences in concentration ranges are observed between sites located within or near sources versus those that are not. Perfluorooctanoic acid (PFOA), ranging from <0.03 ng/L to ~7 mg/L, and perfluorooctanesulfonic acid (PFOS), ranging from 0.01 ng/L to ~5 mg/L, were the two most reported PFAS. The highest PFAS concentration in groundwater is ~15 mg/L reported for the replacement-PFAS 6:2 fluorotelomer sulfonate (6:2 FTS). Maximum reported groundwater concentrations for PFOA and PFOS were compared to concentrations reported for soils, surface waters, marine waters, and precipitation. Soil concentrations are generally significantly higher than those reported for the other media. This accrues to soil being the primary entry point for PFAS release into the environment for many sites, as well as the generally significantly greater retention capacity of soil compared to the other media. The presence of PFAS has been reported for all media in all regions tested, including areas that are far removed from specific PFAS sources. This gives rise to the existence of a "background" concentration of PFAS that must be accounted for in both regional and site-specific risk assessments. The presence of this background is a reflection of the large-scale use of PFAS, their general recalcitrance, and the action of long-range transport processes that distribute PFAS across regional and global scales. This ubiquitous distribution has the potential to significantly impact the quality and availability of water resources in many regions. In addition, the pervasive presence of PFAS in the environment engenders concerns for impacts to ecosystem and human health.

Occurrence of per- and polyfluoroalkyl substances (PFAS) in municipal solid waste landfill leachates from western China

Landfill leachate has been documented as a significant source of trace organic pollutants, comprising an expansive family of per- and polyfluoroalkyl substances (PFAS). This study presents the findings on the distribution of 13 perfluoroalkyl carboxylates (PFCAs) and 4 perfluoroalkyl sulfonates (PFSAs) in leachates from 6 municipal solid waste (MSW) landfills in western China. The total concentrations of 17 PFAS in sampled leachates ranged from 1805 to 43,310 ng/L, and 15 compounds were detected in all samples. The short-chain compounds perfluorobutane sulfonate (PFBS, mean mass fraction 23.1%) and perfluorobutyric acid (PFBA, mean mass fraction 20.6%) were dominant. There were higher PFAS concentrations in leachates from operating landfills (mean: 12,194 ng/L) compared to closed landfills (mean: 2747 ng/L), but there was no significant difference between young (< 10 years) and old landfills (> 10 years). Moderate to weak correlations were observed between PFAS concentrations and leachate properties, e.g., TN, NH₄⁺-N, TOC, and pH. This is the first report on the distribution of PFAS in landfill leachates from western China. The results have identified landfill leachate as an underestimated source of PFAS in the environment and have contributed to a more comprehensive evaluation on PFAS presence across China.

Healthy eating index and diet diversity score as determinants of serum perfluoroalkyl acid (PFAA) concentrations in a national survey of Swedish adolescents

Food is an important source of perfluoroalkyl acid (PFAA) exposure for the general adult population, but few data exist for adolescents. Healthy food habits established during adolescence may positively influence health later in life. Associations between serum PFAA concentrations and a healthy eating index (SHEIA15), as well as a diet diversity score (RADDS), were determined in a nationally representative adolescent population from Sweden (Riksmaten Adolescents 2016-2017, RMA). Using consumption data from food registrations and frequency questionnaires, we additionally analyzed associations with commonly consumed food groups. Associations were analyzed by fitting a cumulative probability model using ordinal regression. Among the seven PFAAs detected in ≥70% of the 1098 participants (age 10-21 years), median concentrations ranged from <1 ng/g serum of perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perflurorundecanoic acid (PFUnDA), linear (lin-) perfluorohexanesulfonic acid (PFHxS) and branched (br-) perfluorooctanesulfonic acid (PFOS) to 1-2 ng/g serum of lin-perfluorooctanoic acid (PFOA) and lin-PFOS. PFNA, PFDA, PFUnDA and lin-PFOS concentrations were positively associated with both SHEIA15 and RADDS, a finding most likely driven by higher consumption of seafood. PFDA, PFUnDA and lin-PFOS concentrations were positively related to commonly consumed fish/shellfish groups, such as lean marine fish and shellfish. Inverse associations between PFAA concentrations and dairy consumption suggest an underlying factor behind dairy consumption that similarly affects adolescent exposure to the different PFAAs. Isomeric differences in dietary exposure between lin-PFOS and br-PFOS were suggested, as br-PFOS concentrations, in contrast to lin-PFOS, were not associated with SHEIA15, RADDS and consumption of different food groups. We conclude that Swedish adolescents, adhering to a diverse and healthy diet, appears to be more highly exposed to legacy PFAAs than those eating less healthy. Additional research is necessary for a better understanding of the health implications of healthy eating from a PFAA exposure perspective.

Spatial distribution and mass transport of Perfluoroalkyl Substances (PFAS) in surface water: A statewide evaluation of PFAS occurrence and fate in Alabama

Per- and polyfluoroalkyl substances (PFAS) have been previously detected near suspected sources in Alabama, but the overall extent of contamination across the state is unknown. This study evaluated the spatial distribution of 17 PFAS within the ten major river basins in Alabama and provided insights into their transport and fate through a mass flux analysis. Six PFAS were identified in 65 out of the 74 riverine samples, with mean ∑₆PFAS levels of 35.2 ng L^-1. The highest ∑₆PFAS concentration of 237 ng L^-1 was detected in the Coosa River, a transboundary river that receives discharges from multiple sources in Alabama and Georgia. PFAS distribution was not observed to be uniform across the state: while the Coosa, Alabama, and Chattahoochee rivers presented relatively high mean ∑₆PFAS concentrations of 191, 100 and 28.8 ng L^-1, respectively, PFAS were not detected in the Conecuh, Escatawpa, and Yellow rivers. Remaining river systems presented mean ∑₆PFAS concentrations between 7.94 and 24.7 ng L^-1. Although the short-chain perfluoropentanoic acid (PFPeA) was the most detected analyte (88%), perfluorobutanesulfonic acid (PFBS) was the substance with the highest individual concentration of 79.4 ng L^-1. Consistent increases in the mass fluxes of PFAS were observed as the rivers flowed through Alabama, reaching up to 63.3 mg s^-1, indicating the presence of numerous sources across the state. Most of the mass inputs would not have been captured if only aqueous concentrations were evaluated, since concentration is usually heavily impacted by environmental conditions. Results of this study demonstrate that mass flux is a simple and powerful complementary approach that can be used to broadly understand trends in the transport and fate of PFAS in large river systems.

Recent progress and challenges on the removal of per- and poly-fluoroalkyl substances (PFAS) from contaminated soil and water

Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.

Occurrence characteristics and health risk assessment of per- and polyfluoroalkyl substances from water in residential areas around fluorine chemical industrial areas, China

Recently, identifying the contamination status and assessing the health risk of per- and polyfluoroalkyl substances (PFASs) in surface water and groundwater have been of great significance. Eighteen individual PFASs were analyzed in thirty-three surface/groundwater samples during one period in a fluorine chemical park (Park A) and during two periods in Park B. The mean total concentration of 18 PFASs (∑PFASs) in Park A (9104.63 ng·L^-1) was significantly higher than that in the wet season (WS) (801.68 ng·L^-1) or DS (714.64 ng·L^-1) in Park B. The perfluorobutane sulfonate (PFBS) was the predominant substance in the two parks, and the maximum concentration in groundwater exceeded 10,000 ng·L^-1. The contamination status in the wet season (WS) was higher than that in the dry season (DS) in Park B. The ∑PFASs in Park A presented an increasing tendency following the groundwater flow direction, whereas this rule was limited to all periods in Park B. Two relative source contributions (RSCs) of 20% or 100% allowed assessing the PFASs risk to different age groups, and the results revealed that some PFASs (4 ≤ C ≤ 7 or 9 ≤ C ≤ 12) were identified as having a low risk quotient (RQ), except for perfluorooctane sulfonate (PFOS) and PFOA (C = 8). The RQ_mix value mainly relies on PFOA and PFOS, with a larger contribution rate of 80-90%. All assessed cases (case 1, case 2, case 3, and case 4) in all age groups revealed that infants were vulnerable to PFASs influence, followed by children, teenagers, and adults.

Design of nanomaterials for the removal of per- and poly-fluoroalkyl substances (PFAS) in water: Strategies, mechanisms, challenges, and opportunities

Due to their persistent and pervasive distribution and their adverse effects on human health, the removal of per- and polyfluoroalkyl substances (PFAS) from the environment has been the focus of current research. Recent studies have shown that engineered nanomaterials provide great opportunities for their removal by chemical, physical and electrochemical adsorption methods, or as photo- or electrocatalysts that promote their degradation. This review summarizes and discusses the performance of recently reported nanomaterials towards PFAS removal in water treatment applications. We discuss the performance, mechanisms, and PFAS removal conditions of a variety of nanomaterials, including carbon-based, non-metal, single-metal, and multi-metal nanomaterials. We show that nanotechnology provides significant opportunities for PFAS remediation and further nanomaterial development can provide solutions for the removal of PFAS from the environment. We also provide an overview of the current challenges.

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) in groundwater: current understandings and challenges to overcome

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been frequently detected in groundwater globally. With the phase-out of perfluorooctane sulfonate (PFOS) and perfluorooctanate (PFOA) due to their risk to the ecosystem and human population, various novel PFASs have been used as replacements and detected in groundwater. In order to summarize the current understanding and knowledge gaps on PFASs in groundwater, we reviewed the studies about environmental occurrence, transport, and risk of legacy and novel PFASs in groundwater published from 1999 to 2021. Our review suggests that PFOS and PFOA could still be detected in groundwater due to the long residence time and the retention in the soil-groundwater system. Firefighting training sites, industrial parks, and landfills were commonly hotspots of PFASs in groundwater. More novel PFASs have been detected via nontarget analysis using high-resolution mass spectrometry. Some novel PFASs had concentrations comparable to that of PFOS and PFOA. Both legacy and novel PFASs can pose a risk to human population who rely on contaminated groundwater as drinking water. Transport of PFASs to groundwater is influenced by various factors, i.e., the compound structure, the hydrochemical condition, and terrain. The exchange of PFASs between groundwater and surface water needs to be better characterized. Field monitoring, isotope tracing, nontarget screening, and modeling are useful approaches and should be integrated to get a comprehensive understanding of PFASs sources and behaviors in groundwater.

Occurrence and mass flows of contaminants of emerging concern (CECs) in Sweden's three largest lakes and associated rivers

Contaminants of emerging concern (CECs) are a concern in aquatic environments due to possible adverse effects on the environment and humans. This study assessed the occurrence and mass flows of CECs in Sweden's three largest lakes and 24 associated rivers. The occurrence and distribution of 105 CECs was investigated, comprising 71 pharmaceuticals, 13 perfluoroalkyl substances (PFASs), eight industrial chemicals, four personal care products (PCPs), three parabens, two pesticides, and four other CECs (mostly anthropogenic markers). This is the first systematic study of CECs in Sweden's main lakes and one of the first to report environmental concentrations of the industrial chemicals tributyl citrate acetate and 2,2'-dimorpholinyldiethyl-ether. The ∑CEC concentration was generally higher in river water (31-5200 ng/L; median 440 ng/L) than in lake water (36-900 ng/L; median 190 ng/L). At urban lake sites, seasonal variations were observed for PCPs and parabens, and also for antihistamines, antidiabetics, antineoplastic agents, antibiotics, and fungicides. The median mass CEC load in river water was 180 g/day (range 4.0-4300 g/day), with a total mass load of 5000 g/day to Lake Vänern, 510 g/day to Lake Vättern, and 5600 g/day to Lake Mälaren. All three lakes are used as drinking water reservoirs, so further investigations of the impact of CECs on the ecosystem and human health are needed.

Global occurrence and probabilistic environmental health hazard assessment of per- and polyfluoroalkyl substances (PFASs) in groundwater and surface waters

Per- and polyfluoroalkyl substances (PFASs) have been used in consumer and military products since the 1950s but are increasingly scrutinized worldwide because of inherent chemical properties, environmental contamination, and risks to public health and the environment. The United States Environmental Protection Agency (USEPA) identified 24 PFASs of interest for further study and possible regulation. We examined 371 peer-reviewed studies published since 2001 to understand the occurrence and distribution of 24 priority PFASs in global surface waters and groundwater. We identified 77,541 and 16,246 data points for surface waters and groundwater, respectively, with total PFAS concentrations ranging from low pg/L to low mg/L levels. Most data were from Asia, Europe, and North America with some reports from Oceania. PFAS information from other geographic regions is lacking. PFASs levels are consistently higher in rivers and streams followed by lakes and reservoirs and then coastal and marine systems. When sufficient data were available, probabilistic environmental hazard assessments (PEHAs) were performed from environmental exposure distributions (EEDs) to identify potential exceedances of available guideline values for each compound by matrix, region, and aquatic system. Specifically, exceedances of USEPA drinking water lifetime health advisory levels were up to 74% for PFOS in groundwater from Oceania and 69% for PFOA in North American groundwater. Our findings support selection of environmentally relevant experimental treatment levels for future toxicology, ecotoxicology and bioaccumulation studies, and potable source water exposure investigations, while highlighting PFASs and major geographic locations requiring additional study and inclusion in global monitoring and surveillance campaigns.

Activated carbon versus metal-organic frameworks: A review of their PFAS adsorption performance

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a class of fluorinated aliphatic compounds considered as emerging persistent pollutants. Owing to their adverse effects on human health and environment, efficient methods of their removal from various complex matrices need to be developed. This review focuses on recent results addressing the adsorption of PFAS on activated carbons (AC) and metal-organic frameworks (MOF). While the former are well-established adsorbents used in water treatment, the latter are relatively new and still not applied at a large scale. Nevertheless, they attract research interests owing to their developed porosity and versatile surface chemistry. While AC provide high volumes of pores and hydrophobic surfaces to strongly attract fluorinated chains, MOF supply sites for acid-base complexation and a variety of specific interactions. The modifications of AC are focused on the introduction of basicity to attract PFAS anions via electrostatic/chemical interactions, and those of MOF - on structural defects to increase the pore sizes. Based on the comparison of the performance and specifically adsorption forces provided by these two groups of materials, activated carbons were pointed out as worthy of further research efforts. This is because their surface, especially that in large pores, where dispersive forces are week and where extensive pore space might be utilized to adsorb more PFAS, can be further chemically modified and these modifications might be informed by the mechanisms of PFAS adsorption, which are specific for MOF. This review emphasizes the effects of these modifications on the adsorption mechanism and brings the critical assessment of the advantages/disadvantages of both groups as PFAS adsorbents.

Multiple pollutants in groundwater near an abandoned Chinese fluorine chemical park: concentrations, correlations and health risk assessments

Contamination and adverse effects from various pollutants often appear in abandoned industrial regions. Thus, nine groundwater samples were collected from the vicinity of the fluorochemical industry in Fuxin City, Liaoning Province, to determine concentrations of the ten heavy metals arsenic (As), chromium (Cr), cadmium (Cd), lead (Pb), nickel (Ni), copper (Cu), manganese (Mn), zinc (Zn), iron (Fe) and mercury(Hg), as well as those of fluorine (F⁻) and eighteen poly- and perfluorinated substances (PFASs), analyse correlation relationships, and assess the health risks for different age groups. The results showed that the levels of fluorine (F⁻) (0.92–4.42 mg·L⁻¹), Mn (0.0005–4.91 mg·L⁻¹) and Fe (1.45–5.61 mg·L⁻¹) exceeded the standard limits for drinking water. Short chain perfluorobutanoic acid (PFBA) (4.14–2501.42 ng·L⁻¹), perfluorobutane sulfonate (PFBS) (17.07–51,818.61 ng·L⁻¹) and perfluorohexanoic acid (PFHxA) (0.47–936.32 ng·L⁻¹) were the predominant substances from the PFASs group. No individual PFASs levels had significant relationships with F⁻ or heavy metal contents. There was a positive relationship between short chain PFASs concentrations and water depth and a negative relationship between long chain PFASs concentration and water depth. The hazard quotient (HQ) decreased in the order F⁻ > heavy metals > PFASs and also decreased for older age groups. In addition, As, Fe, Mn and perfluorooctanoic acid (PFOA) were the main sources of risk from the heavy metal and PFASs groups, respectively.

Perfluoroalkyl and Polyfluoroalkyl Substances in Groundwater Used as a Source of Drinking Water in the Eastern United States

In 2019, 254 samples were collected from five aquifer systems to evaluate perfluoroalkyl and polyfluoroalkyl substance (PFAS) occurrence in groundwater used as a source of drinking water in the eastern United States. The samples were analyzed for 24 PFAS, major ions, nutrients, trace elements, dissolved organic carbon (DOC), volatile organic compounds (VOCs), pharmaceuticals, and tritium. Fourteen of the 24 PFAS were detected in groundwater, with 60 and 20% of public-supply and domestic wells, respectively, containing at least one PFAS detection. Concentrations of tritium, chloride, sulfate, DOC, and manganese + iron; percent urban land use within 500 m of the wells; and VOC and pharmaceutical detection frequencies were significantly higher in samples containing PFAS detections than in samples with no detections. Boosted regression tree models that consider 57 chemical and land-use variables show that tritium concentration, distance to the nearest fire-training area, percentage of urban land use, and DOC and VOC concentrations are the top five predictors of PFAS detections, consistent with the hydrologic position, geochemistry, and land use being important controls on PFAS occurrence in groundwater. Model results indicate that it may be possible to predict PFAS detections in groundwater using existing data sources.

Experimental insights into anodic oxidation of hexafluoropropylene oxide dimer acid (GenX) on boron-doped diamond anodes

GenX is the trade name of the ammonium salt of hexafluoropropylene oxide dimer acid (HFPO-DA) and is used as a replacement for the banned perfluorooctanoic acid (PFOA). However, recent studies have found GenX to be more toxic than PFOA. This work deals with the electrochemical degradation of HFPO-DA using boron-doped diamond anodes. For the first time, an experimental study was conducted to investigate the influence of sulfate concentration and other operating parameters on HFPO-DA degradation. Results demonstrated that sulfate radicals were ineffective in HFPO-DA degradation due to steric hindrance by -CF₃ branch. Direct electron transfer was found as the rate-determining step. By comparing degradation of HFPO-DA with that of PFOA, it was observed that the steric hindrance by -CF₃ branch in HFPO-DA decreased the rate of electron transfer from the carboxyl head group even though its defluorination rate was faster. Conclusively, a degradation pathway is proposed in which HFPO-DA mineralizes to CO₂ and F- via formation of three intermediates.

Assessment of per- and polyfluoroalkyl substances in Biscayne Bay surface waters and tap waters from South Florida

Per- and polyfluoroalkyl substances (PFAS) are persistent anthropogenic pollutants present in many environmental media worldwide due to their extensive uses in many industrial and commercial products combined with their high thermal and chemical stabilities. Its ubiquitous presence in surface and drinking water supply and significant adverse health effects observed in wildlife and humans, associated with its bioaccumulation potential, pose big concerns. In this study, we have developed and validated a semi-automated solid phase extraction (SPE) followed by liquid chromatography-mass spectrometry (LC-MS/MS) for the determination of legacy and emerging short-chain PFAS substitutes in surface and tap water at low parts-per-trillion (ppt) levels in South Florida environments. Surface waters from Biscayne Bay and adjacent canals (n = 15) and tap waters from different counties (Miami-Dade, Broward, and Palm Beach County) (n = 21) were collected between October 2020 (wet season) and February 2021 (dry season). Total PFAS concentrations up to 242 ng L^-1 (average of 168 ng L^-1) were found in tap water from Grapeland Heights, which is the closest location to the Miami international airport that was sampled. The highest average total PFAS level of 106 ng L^-1 was observed in surface water from the Biscayne Canal C-8 for the wet and dry season. In general, average total PFAS was higher in tap water (86.3 ng L^-1) than in surface waters (46.3 ng L^-1), whereas the most predominant and frequently detected PFAS were PFBA, PFBS, PFPeA, PFHxA, PFHxS, PFOA and PFOS. PFAS levels found could represent a high human health risk, and ecological risk based on PFOS levels above recommended thresholds are also noted. Such knowledge on PFAS occurrence, distribution and sources in South Florida will provide essential information for local and regional regulatory agencies related to water quality, further facilitating the development of guidelines and procedures for PFAS pollution control and reduction in Florida.

Enhanced removal of per- and polyfluoroalkyl substances in complex matrices by polyDADMAC-coated regenerable granular activated carbon

Granular activated carbon (GAC) has been used to remove per- and polyfluoroalkyl substances (PFASs) from industrial or AFFF-impacted waters, but its effectiveness can be low because adsorption of short-chained PFASs is ineffective and its sites are exhausted rapidly by co-contaminants. To increase adsorption of anionic PFASs on GAC by electrostatic attractions, we modified GAC's surface with the cationic polymer poly diallyldimethylammonium chloride (polyDADMAC) and tested its capacity in complex water matrices containing dissolved salts and humic acid. Amending with concentrations of polyDADMAC as low as 0.00025% enhanced GAC's adsorption capacity for PFASs, even in the presence of competing ions. This suggests that electrostatic interactions with polyDADMAC's quaternary ammonium functional groups helped bind organic and inorganic ions as well as the headgroup of short-chain PFASs, allowing more overall PFAS removal by GAC. Evaluating the effect of polymer dose is important because excessive addition can block pores and reduce overall PFAS removal rather than increase it. To decrease the waste associated with this adsorption strategy by making the adsorbent viable for more than one saturation cycle, a regeneration method is proposed which uses low-power ultrasound to enhance the desorption of PFASs from the polyDADMAC-GAC with minimum disruption to the adsorbent's structure. Re-modification with the polymer after sonication resulted in a negligible decrease in the sorbent's capacity over four saturation rounds. These results support consideration of polyDADMAC-modified GAC as an effective regenerable adsorbent for ex-situ concentration step of both short and long-chain PFASs from real waters with high concentrations of competing ions and low PFAS loads.

Exposure to perfluoroalkyl substances in waste recycling workers: Distributions in paired human serum and urine

Occupational exposure to per- and polyfluoroalkyl substances (PFASs) is an emerging public health concern, because of their potential adverse health effects. In this study, concentrations of 21 legacy and alternative PFASs in paired serum and urine samples collected from 163 workers (from five waste recycling plants) were analyzed. The results showed that the average concentration of 21 PFASs in urine samples (66.6 ng mL^-1) were higher than in serum (31.3 ng mL^-1). Concentrations of perfluorocarboxylates (PFCAs) in urine were also considerably higher than perfluorosulfonates (PFSAs), especially for short-chain PFCAs. Demographic factors (such as sex, age, working age, and job assignment) on PFAS exposure were also assessed based on the obtained results. PFAS concentrations in serum samples from males were significantly higher than in females, and working age was positively (p < 0.05) associated with most PFAS serum levels. Higher levels of PFAS were found in sorters than in workers with other job assignments, such as managers, suggesting that sorters may be directly exposed to PFASs. Interestingly, perfluorophosphonates (PFPAs) were first to be detected in human urine with >80% detection frequency. The average level of three PFPAs in the serum (7.58 ng mL^-1) and urine (1.45 ng mL^-1) samples appeared to be higher in comparison with most PFCAs and PFSAs. Thus, the toxicity of PFPAs in human beings needs to be further studied.

Levels and trends of perfluoroalkyl acids (PFAAs) in water (2013-2020) and fish from selected riverine basins in Spain

The aim of the present study was to assess the presence of perfluoroalkyl acids (PFAAs), namely perfluoroalkane sulfonates and perfluoroalkyl carboxylic acids, in Spanish river basins in order to: identify potential spatiotemporal variations; evaluate the effectiveness of the measures implemented for the reduction/elimination of these pollutants; verify the fulfillment of the Environmental Quality Standards (EQSs) in the European Union. PFOS and PFOA were determined in 116 water samples from four sites in the Duero basin, the largest in the Iberian Peninsula, collected seasonally from 2013 to 2020. In addition, 30 fish sample composites from the sample banks of Duero, Tagus, Ebro, Eastern Cantabrian and Catalonian basins were analyzed for 15 PFAAs. Median PFOS and PFOA concentrations were 0.72 and 0.42 ng/L, ranging from values below the limit of quantification (LOQ) to 81 and 22 ng/L, respectively. During the studied period, 51% of water samples were above the EQS of 0.65 ng/L for PFOS. In the case of fish, the PFOS range was <LOQ-59 with 33% of the samples above the EQS of 9.1 ng/g wet weight. Moreover, fish from the Tagus and Catalonian basins showed median concentrations above the EQS. Particularly, fish collected around highly populated areas such as Madrid and Barcelona showed the greatest PFAA concentrations. Overall, PFAA concentrations in water and fish increased significantly with population density suggesting urban areas as their main source. Although our results suggested decreasing tendencies for PFOS and PFOA in water, significant trends only could be confirmed at two sampling sites.

Occurrence and removal of poly/perfluoroalkyl substances (PFAS) in municipal and industrial wastewater treatment plants

The presence of poly- and perfluoroalkyl substances (PFAS) has caused serious problems for drinking water supplies especially at intake locations close to PFAS manufacturing facilities, wastewater treatment plants (WWTPs), and sites where PFAS-containing firefighting foam was regularly used. Although monitoring is increasing, knowledge on PFAS occurrences particularly in municipal and industrial effluents is still relatively low. Even though the production of C8-based PFAS has been phased out, they are still being detected at many WWTPs. Emerging PFAS such as GenX and F-53B are also beginning to be reported in aquatic environments. This paper presents a broad review and discussion on the occurrence of PFAS in municipal and industrial wastewater which appear to be their main sources. Carbon adsorption and ion exchange are currently used treatment technologies for PFAS removal. However, these methods have been reported to be ineffective for the removal of short-chain PFAS. Several pioneering treatment technologies, such as electrooxidation, ultrasound, and plasma have been reported for PFAS degradation. Nevertheless, in-depth research should be performed for the applicability of emerging technologies for real-world applications. This paper examines different technologies and helps to understand the research needs to improve the development of treatment processes for PFAS in wastewater streams.

Honey-based trap for Pseudomonas: a sustainable prototype for water disinfection

This paper introduces a novel prototype for the removal of Pseudomonas from water samples. Bacterial cells have the tendency to get attracted towards specific chemicals (chemotaxis); a 'honey-based trap' (henceforth, addressed as 'honey-trap') strip was conceptualized by integrating a combination of serine, pseudomonas-specific chemoattractant and honey to attract and inhibit the bacteria in situ. Honey, a natural antimicrobial agent, has garnered the attention as an effective inhibitor for Pseudomonal biofilms and wound infections. Dipping serine side of the strip attracted bacteria towards honey-trap, whereby the porous nature of the strip facilitated the 'trapping' and subsequent diffusion of the bacterial cells towards honey-adsorbed end of the strip. This 'honey-trap' reportedly leads to the targeted elimination of Pseudomonas, hence facilitating its removal. The percentage efficacy of this 'honey-trap' device is 96% with a log reduction equivalent to 1.6 within a time frame of 2 h. Pseudomonas aeruginosa, although, not a natural contaminant of potable water, enters circulation due to improperly maintained plumbing fixtures and storage facilities. Honey-trap strip is an easy to use, biodegradable and cost-effective sustainable solution, and thus a scaled-up version of this device may enable substantial improvement in quality of potable water. Schematics showing the preparation and working of the Pseudomonas Honey-trap. Serine as an attractant and honey as an inhibitor was absorbed on filter strips (HT) for use. The strip was dipped in culture from serine end. After different time period of incubation, difference in bacterial load was confirmed by measuring the electrical conductivity and OD600nm of the culture. Additionally, inhibitory effect of HS was confirmed by placing the strip incubated with culture on agar plates and differences in bacterial lawn were monitored. Removal of bacterial cells from the suspension was also confirmed using absorption spectroscopy.

Occurrence of per- and polyfluoroalkyl substances and unidentified organofluorine in leachate from waste-to-energy stockpile - A case study

Per- and polyfluoroalkyl substances (PFASs) are a diverse group of chemicals used in consumer products, which will inevitably end up in waste streams. Landfills are widely recognized secondary point sources of PFASs, but other types of waste management sites have received less attention. Therefore, in a case study presented here we investigated releases of PFASs from temporarily stored waste by determining quantities of 34 PFASs in leachate from a Waste-to-Energy stockpile (45 000 ± 2000 tonnes) during five months in 2019. We also measured extractable organofluorine (EOF) to account for PFASs not included in the target list. The mean total concentration of the 34 PFAS (Σ₃₄PFAS) was 211 ± 31 ng/L, and short-chain (C4-C7) perfluorocarboxylic acids (PFCAs) accounted for 56-60% of the total. Moreover, we found that Σ₃₄PFAS only accounted for 12% ± 4% of EOF detected in the leachate. Our results demonstrate that waste stockpiles are previously unexplored sources of PFASs in the environment, and the dominance of short-chain PFCAs is consistent with observed profiles of contaminants in landfill leachates.

Sensors for detecting per- and polyfluoroalkyl substances (PFAS): A critical review of development challenges, current sensors, and commercialization obstacles

Per- and polyfluoroalkyl substances (PFAS) are a class of compounds that have become environmental contaminants of emerging concern. They are highly persistent, toxic, bioaccumulative, and ubiquitous which makes them important to detect to ensure environmental and human health. Multiple instrument-based methods exist for sensitive and selective detection of PFAS in a variety of matrices, but these methods suffer from expensive costs and the need for a laboratory and highly trained personnel. There is a big need for fast, inexpensive, robust, and portable methods to detect PFAS in the field. This would allow environmental laboratories and other agencies to perform more frequent testing to comply with regulations. In addition, the general public would benefit from a fast method to evaluate the drinking water in their homes for PFAS contamination. A PFAS sensor would provide almost real-time data on PFAS concentrations that can also provide actionable information for water quality managers and consumers around the planet. In this review, we discuss the sensors that have been developed up to this point for PFAS detection by their molecular detection mechanism as well as the goals that should be considered during sensor development. Future research needs and commercialization challenges are also highlighted.