Formation and Physicochemical Characteristics of Nano Biochar: Insight into Chemical and Colloidal Stability

Influence of natural organic matter on the aggregation dynamics of biochar colloids derived from various feedstocks

Abundant biochar colloids (BCs) produced from a wide range of feedstocks, resulting from forest fires, agricultural production, and environmental restoration, exhibit varying aggregation behaviors influenced by feedstock type and natural organic matter. However, the impact of natural organic matter on the colloidal stability of BCs derived from different feedstocks remains poorly understood. In this study, six selected biochars were derived from various feedstocks as follows: sewage sludge (SS), rice husk (RH), oil seed rape straw pellets (OSR), wheat straw pellets (WS), miscanthus straw pellets (MS) and softwood pellets (SW). The colloidal stability of BCs, with the exogenous addition of organic matter, was further determined. The order of critical coagulation concentrations (CCCs) of BCs with the presence of humic acid (HA) was as follows: RH (989.48 mM) < MS (1084.69 mM) < SS (1149.76 mM) < WS (1338.99 mM) < OSR (2402.98 mM) < SW (3151.32 mM). This order was significantly positively correlated with the specific surface area and negatively correlated with the ash content of the bulk biochar. Compared to HA, bovine serum albumin (BSA) more effectively inhibited the aggregation behavior of BCs due to steric hindrance. The initial aggregation rate constant (k) of BCs at 3000 mM NaCl was as follows: MS (0.238 nm/s) > OSR (0.142 nm/s) > WS (0.128 nm/s) > SS (0.126 nm/s) > RH (0.118 nm/s) > SW (0.112 nm/s). The stabilizing effects of BSA on biochar colloids were independent of the physicochemical properties of bulk biochar. In the presence of BSA, a thin layer of protein corona significantly enhanced the stability of biochar colloids, particularly the BCs derived from MS. Our results underscore the importance of considering feedstock resources and natural organic matter type when assessing the aggregation and potential risks of BCs in aquatic systems.

Formation mechanism, prevention of malignant ascites effusion and reduction of intestinal mucosal irritation of natural microemulsion from Euphorbia lathyris Pulveratum

Malignant ascites effusion (MAE) is a common complication of advanced malignant tumors with limited treatments. Euphorbia lathyris (EL) has a long history of application in patients with edema and ascites. Herein, we reported for the first time a mode in which EL and EL Pulveratum (PEL) spontaneously formed natural microemulsions (ELM and PELM) without the addition of any carriers and excipients, and found that the protein and phospholipid contained in them encapsulated fatty oil and diterpenoid esters through non-covalent interactions. The denaturation and degradation of protein in PELM resulted in stronger binding of diterpenoid esters to the hydrophobic region of protein, which facilitated the sustained and slow release of diterpenoid esters and improved their bioavailability in vivo, thereby retaining the efficacy of preventing MAE while alleviating the irritation of intestinal mucosa. The mechanism by which PELM retained efficacy might be related to increased feces moisture and urine volume, and decreased expression of AVPR2, cAMP, PKA and AQP3 in MAE mice. And its mechanism of reducing intestinal mucosal irritation was related to decreased cell apoptosis, amelioration of oxidative stress, elevation of mitochondrial membrane potential, and up-regulation of Occludin and Claudin-1 expression in IEC-6 cells. This nano-adjuvant-free natural microemulsions may be a promising therapeutic strategy in the field of phytochemistry for promoting the application of natural and efficient nano-aggregates spontaneously formed by medicinal plants in MAE, and provide a new perspective for advancing the development of the fusion of Chinese herbal medicine and nanomedicine and its clinical translation.

From Bulk to Nano: Formation, Features, and Functions of Nano-Black Carbon in Biogeochemical Processes

Globally increasing wildfires and widespread applications of biochar have led to a growing amount of black carbon (BC) entering terrestrial ecosystems. The significance of BC in carbon sequestration, environmental remediation, and the agricultural industry has long been recognized. However, the formation, features, and environmental functions of nanosized BC, which is one of the most active fractions in the BC continuum during global climate change, are poorly understood. This review highlights the formation, surface reactivity (sorption, redox, and heteroaggregation), biotic, and abiotic transformations of nano-BC, and its major differences compared to other fractions of BC and engineered carbon nanomaterials. Potential applications of nano-BC including suspending agent, soil amendment, and nanofertilizer are elucidated based on its unique properties and functions. Future studies are suggested to develop more reliable detection techniques to provide multidimensional information on nano-BC in environmental samples, explore the critical role of nano-BC in promoting soil and planetary health from a one health perspective, and extend the multifield applications of nano-BC with a lower environmental footprint but higher efficiency.

From cane to nano: advanced nanomaterials derived from sugarcane products with insights into their synthesis and applications

Sugarcane-based products are inherently rich in elements such as silicon, carbon and nitrogen. As such, these become ideal precursors for utilization in a wide array of application fields. One of the appealing areas is to transform them into nanomaterials of high interest that can be employed in several prominent applications. Among nanomaterials, sugarcane products based on silica nanoparticles (SNPs), carbon dots (CDs), metal/metal oxide-based NPs, nanocellulose, cellulose nanofibers (CNFs), and nano biochar are becoming increasingly reported. Through manipulation of the experimental conditions and choosing suitable starting precursors and elements, it is possible to devise these nanomaterials with highly desired properties suited for specific applications. The current review presents the findings from the recent literature wherein an effort has been made to convey new development in the field of sugarcane-based products for the synthesis of the above-mentioned nanomaterials. Various nanomaterials were systematically discussed in terms of their synthesis and application perspectives. Wherever possible, a comparative analysis was carried out to highlight the potential of sugarcane products for the intended purpose as compared to other biomass-based materials. This review is expected to stand out in delivering an up-to-date survey of the literature and provide readers with necessary directions for future research.

Biochar Applications for Efficient Removal of Energetic Compound Contaminants

Military activities and the production or disposal of ammunition often lead to soil contamination with energetic compounds (ECs) such as dinitrotoluene, trinitrotoluene, and hexogen, posing significant threats to human health and the ecosystem. Biochar has emerged as a cost-effective and widely available solution for remediating contaminated sites characterized by its capacity for pollutant removal through adsorption and conversion process, along with minimal secondary pollution. This paper provides a comprehensive review of relevant literature on biochar's efficacy in eliminating ECs, including an analysis of the underlying mechanisms. The discussion addresses challenges and opportunities associated with biochar application in ECs remediation, offering insights for future research directions. In summary, the use of biochar for ECs removal presents a promising and eco-friendly approach, facilitating the remediation of contaminated sites while promoting soil function and ecosystem recovery.

Recent advancement of nano-biochar for the remediation of heavy metals and emerging contaminants: Mechanism, adsorption kinetic model, plant growth and development

Even though researches have shown that biochar can improve soil-health and plant-growth even in harsh environments and get rid of harmful heavy metals and new contaminants, it is still not sustainable, affordable, or effective enough. Therefore, scientists are required to develop nanomaterials in order to preserve numerous aquatic and terrestrial species. The carbonaceous chemical known as nano-biochar (N-BC) can be used to get rid of metal contamination and emerging contaminants. However, techniques to reduce hetero-aggregation and agglomeration of nano-biochar are needed that lead to the emergence of emerging nano-biochar (EN-BC) in order to maximise its capacity for adsorption of nano-biochar. To address concerns in regards to the expanding human population and sustain a healthy community, it is imperative to address the problems associated with toxic heavy metals, emerging contaminants, and other abiotic stressors that are threatening agricultural development. Nano-biochar can provide an effective solution for removal of emerging contaminants, toxic heavy metals, and non-degradable substance. This review provides the detailed functional mechanistic and kinetics of nano-biochar, its effectiveness in promoting plant growth, and soil health under abiotic stress. Nonetheless, this review paper has comprehensively illustrated various adsorption study models that will be employed in future research.

Colloidal fraction on pomelo peel-derived biochar plays a dual role as electron shuttle and adsorbent in controlling arsenic transformation in anoxic paddy soil

Arsenic release and reduction in anoxic environments can be mitigated or facilitated by biochar amendment. However, the key fractions in biochars and how they control arsenic transformation remain poorly understood. In this study, a biochar produced from pomelo peel was rich in colloids and was used to evaluate the roles of the colloidal and residual fractions of biochar in arsenic transformation in anoxic paddy soil. Bulk biochar showed a markedly higher maximum adsorption capacity for As(III) at 1732 mg/kg than for As(V) at 75.7 mg/kg, mainly because of the colloidal fraction on the surface. When compared with the control and treatments with the colloidal/residual fraction, the addition of bulk biochar facilitated As(V) reduction and release in the soil during days 0-12, but decreased the dissolved As(III) concentration during days 12-20. The colloidal fraction revealed significantly higher electron donating capacity (8.26 μmole-/g) than that of bulk biochar (0.88 μmole-/g) and residual fraction (0.65 μmole-/g), acting as electron shuttle to promote As(V) reduction. Because the colloidal fraction was rich in aliphatic carbon, fulvic acid-like compounds, potassium, and calcium, it favored As(III) adsorption when more As(III) was released, probably via organic-cation-As(III) complexation. These findings provide deeper insight into the role of the colloidal fraction of biochar in controlling anaerobic arsenic transformation, which will be helpful for the practical application of biochar in arsenic-contaminated environments.

A systematic review of biochar aging and the potential eco-environmental risk in heavy metal contaminated soil

Biochar is widely accepted as a green and effective amendment for remediating heavy metals (HMs) contaminated soil, but its long-term efficiency and safety changes with biochar aging in fields. Currently, some reviews have qualitatively summarized biochar aging methods and mechanisms, aging-induced changes in biochar properties, and often ignored the potential eco-environmental risk during biochar aging process. Therefore, this review systematically summarizes the study methods of biochar aging, quantitatively compares the effects of different biochar aging process on its properties, and discusses the potential eco-environmental risk due to biochar aging in HMs contaminated soil. At present, various artificial aging methods (physical aging, chemical aging and biological aging) rather than natural field aging have been applied to study the changes of biochar's properties. Generally, biochar aging increases specific surface area (SSA), pore volume (PV), surface oxygen-containing functional group (OFGs) and O content, while decreases pH, ash, H, C and N content. Chemical aging method has a greater effect on the properties of biochar than other aging methods. In addition, biochar aging may lead to HMs remobilization and produce new types of pollutants, such as polycyclic aromatic hydrocarbons (PAHs), environmentally persistent free radicals (EPFRs) and colloidal/nano biochar particles, which consequently bring secondary eco-environmental risk. Finally, future research directions are suggested to establish a more accurate assessment method and model on biochar aging behavior and evaluate the environmental safety of aged biochar, in order to promote its wider application for remediating HMs contaminated soil.

Uptake, translocation, and nutrient efficiency of nano-bonechar as a plant growth regulator in hydroponics and soil systems

The use of nanotechnology in terms of nanoparticles, carbon nanotubes, and quantum dots, when exposed to the plants, helps increase their productivity. It is worth the effort to comprehend the fate of these nanoparticles in plants. Bonechar derived from bones is a rich source of C, P, Ca2+, and Mg2+ nutrients, which can significantly contribute to the growth of the plants. This study focused on the uptake of nano-bonechar (NBC) in the Syngonium podophyllum plant, and its effects on plant growth under hydroponics and soil systems. The compound microscopy and SEM-EDX results confirmed the presence of NBC in the leaves and roots of the plants in hydroponics and soil systems. The FTIR spectra reflected the presence of functional groups of the NBC in the leaves of the Syngonium podophyllum plant. The plant's growth parameters showed an increase in fresh weight, dry weight, shoot length, chlorophyll content, leaf count, total Ca2+, total PO43-, and total organic carbon of plants in both systems. The NBC not just improved plant physiochemical parameters but also built up the soil quality in terms of bioavailable Ca2+, PO43-, water holding capacity, and soil organic matter. It is concluded that the production of carbon-based NBC not only helps manage bone waste but also their efficient uptake in plants significantly improving plant productivity.

Migration Rules and Mechanisms of Nano-Biochar in Soil Columns under Various Transport Conditions

Compared to traditional biochar (BC), nano-biochar (NBC) boasts superior physicochemical properties, promising extensive applications in agriculture, ecological environments, and beyond. Due to its strong adsorption and migration properties, NBC may carry nutrients or pollutants to deeper soil layers or even groundwater, causing serious environmental risks. Nevertheless, the migration rules and mechanisms of NBC in soil are still unclear. Therefore, this study employed soil column migration experiments to systematically explore the migration rules and mechanisms of NBC under various flow rates, initial soil water contents, soil depths, and soil textures. The results showed that regulated by smaller particle size differences and greater surface charges, NBC exhibited a stronger migration ability compared with traditional BC. As the soil texture transitioned from fine to coarse, the migration capability of NBC significantly improved, driven by both pore structure and interaction forces as described by the DLVO theory. The migration ability of NBC was also greatly boosted as the soil transitioned from saturated to unsaturated conditions, primarily because of preferential flow. When the flow rate increased from 70% KS to 100% KS and 130% KS, the migration ability of NBC also increased accordingly, as changes in injection flow rates altered the velocity distribution of pore water. NBC in 25 cm soil columns was more prone to shallow retention compared with 10 cm soil columns, resulting in weaker overall migration ability. In addition, through fitting of the two-site kinetic model and related parameters, the penetration curves of NBC under various variable conditions were effectively characterized. These findings could offer valuable insights for NBC's future efficient, rational, and sustainable utilization, facilitating the evaluation and mitigation of its potential environmental risks.

Effects of thermophilic bacteria inoculation on maturity, gaseous emission and bacterial community succession in hyperthermophilic composting

Hyperthermophilic composting, characterized by temperatures equal to or exceeding 75 °C, offers superior compost maturity and performance. Inoculation with thermophilic bacteria presents a viable approach to achieving hyperthermophilic composting. This study investigates the effects of inoculating thermophilic bacteria, isolated at different temperatures (50 °C, 60 °C, and 70 °C) into compost on maturity, gaseous emissions, and microbial community dynamics during co-composting. Results indicate that the thermophilic bacteria inoculation treatments exhibited peak temperature on Day 3, with the maximum temperature of 75 °C reached two days earlier than the control treatment. Furthermore, these treatments demonstrated increased bacterial richness and diversity, along with elevated relative abundances of Firmicutes and Proteobacteria. They also fostered mutualistic correlations among microbial species, enhancing network connectivity and complexity, thereby facilitating lignocellulose degradation. Specifically, inoculation with thermophilic bacteria at 60 °C increased the relative abundance of Thermobifida and unclassified-f-Thermomonosporaceae (Actinobacteriota), whereas Bacillus, a thermophilic bacterium, was enriched in the 70 °C inoculation treatment. Consequently, the thermophilic bacteria at 60 °C and 70 °C enhanced maturity by 36 %-50 % and reduced NH3 emissions by 1.08 %-27.50 % through the proliferation of thermophilic heterotrophic ammonia-oxidizing bacteria (Corynebacterium). Moreover, all inoculation treatments decreased CH4 emissions by 6 %-27 % through the enrichment of methanotrophic bacteria (Methylococcaceae) and reduced H2S, Me2S, and Me2SS emissions by 1 %-25 %, 47 %-63 %, and 15 %-53 %, respectively. However, the inoculation treatments led to increased N2O emissions through enhanced denitrification, as evidenced by the enrichment of Truepera and Pusillimonas. Overall, thermophilic bacteria inoculation promoted bacteria associated with compost maturity while attenuating the relationship between core bacteria and gaseous emissions during composting.

Impacts of biochar aging on its interactions with As(III) and the combined cytotoxicity

Despite the extensive use of biochar (BC) in soil and aqueous media for pollutant immobilization, the environmental behaviors and health risks of aged BC with multiple pollutants, especially with metal ions possessing various valence states, remain unexplored. Here, we prepared fresh banana peel BC (BP-BC) and aged BP-BCs by acidification (ABP-BC) and oxidation (OBP-BC). ABP-BC was then chosen to explore its environmental behaviors (i.e., adsorption, desorption, and arsenic valence transfer) towards As(III)-Cu(II) and the combined cytotoxicity of BCs with As(III)-Cu(II) was investigated in Human Gastric epithelium cells (GES-1). Our results demonstrate that the aging process notably alters the physicochemical properties of BP-BC, including surface morphology, elemental composition, and surface functional groups, which are key factors affecting the long-term environmental behaviors of BC with As(III)/Cu(II). Specifically, the aging process significantly enhanced the adsorption of As(III) on BC but reduced the adsorption of Cu(II). Although the oxidation of As(III) to As(V) did not change much, the aging process improved the stability of ABP-BC-metal ion complexes, alleviating the release of As(III) in acidic solution. Consequently, the combined cytotoxicity induced by ABP-BC-As(III)-Cu(II) was reduced compared to BP-BC-As(III)-Cu(II). The study highlights the critical roles of the aging process in regulating the As(III) adsorption/desorption dynamics on BCs and their combined cytotoxicity in the presence of multiple metal ions.

New Insights into Aggregation Behaviors of the UV-Irradiated Dissolved Biochars (DBioCs) in Aqueous Environments: Effects of Water Chemistries and Variation in the Hamaker Constant

The aggregation behavior of ubiquitous dissolved black carbon (DBC) largely affects the fate and transport of its own contaminants and the attached contaminants. However, the photoaging processes and resulting effects on its colloidal stability remain yet unknown. Herein, dissolved biochars (DBioCs) were extracted from common wheat straw biochar as a proxy for an anthropogenic DBC. The influences of UV radiation on their aggregation kinetics were systematically investigated under various water chemistries (pH, electrolytes, and protein). The environmental stability of the DBioCs before and after radiation was further verified in two natural water samples. Hamaker constants of pristine and photoaged DBioCs were derived according to Derjaguin-Landau-Verwey-Overbeek (DLVO) prediction, and its attenuation (3.19 ± 0.15 × 10-21 J to 1.55 ± 0.07 × 10-21 J after 7 days of radiation) was described with decay kinetic models. Pearson correlation analysis revealed that the surface properties and aggregation behaviors of DBioCs were significantly correlated with radiation time (p < 0.05), indicating its profound effects. Based on characterization and experimental results, we proposed a three-stage mechanism (contended by photodecarboxylation, photo-oxidation, and mineral exposure) that DBioCs might experience under UV radiation. These findings would provide an important reference for potential phototransformation processes and relevant behavioral changes that DBC may encounter.

Molecular-weight dependent promotion and competition effects of natural organic matter on dissolved black carbon removal by coagulation

Dissolved black carbon (DBC) is the ubiquitous component of dissolved organic matter pools with the high reactivity for disinfection byproducts formation. However, it is unknown that the influence of molecular weight (MW) of natural organic matter (NOM) on the DBC removal from potable water sources. Therefore, it was studied that the DBC removal by coagulation in the presence of the NOM with various molecular weights. The DBC removal was promoted due to the presence of NOM and the promotion degree decreased with decreasing MW of NOM. Furthermore, the removal ratio of humic-like component increased as the MW of NOM decreased, suggesting that the competition between DBC and NOM increased with decreasing MW. The functional groups after coagulation were the same with that before coagulation as the MW of NOM varied, suggesting that the molecular structure was not the key factor of influencing the DBC removal. This study will give the deep insight into the prediction of the DBC removal ratio by coagulation based on the MW of NOM in water sources.

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Biochar improved the solubility of triclocarban in aqueous environment: Insight into the role of biochar-derived dissolved organic carbon

Biochar as an effective adsorbent can be used for the removal of triclocarban from wastewater. Biochar-derived dissolved organic carbon (BC-DOC) is an important carbonaceous component of biochar, nonetheless, its role in the interaction between biochar and triclocarban remains little known. Hence, in this study, sixteen biochars derived from pine sawdust and corn straw with different physico-chemical properties were produced in nitrogen-flow and air-limited atmospheres at 300-750 °C, and investigated the effect of BC-DOC on the interaction between biochar and triclocarban. Biochar of 600∼750 °C with low polarity, high aromaticity, and high porosity presented an adsorption effect on triclocarban owing to less BC-DOC release as well as the strong π-π, hydrophobic, and pore filling interactions between biochar and triclocarban. In contrast and intriguingly, biochar of 300∼450 °C with low aromaticity and high polarity exhibited a significant solubilization effect rather than adsorption effect on triclocarban in aqueous solution. The maximum solubilization content of triclocarban in biochar-added solution reached approximately 3 times its solubility in biochar-free solution. This is mainly because the solubilization effect of BC-DOC surpassed the adsorption effect of biochar though the BC-DOC only accounted for 0.01-1.5 % of bulk biochar mass. Furthermore, the high solubilization content of triclocarban induced by biochar was dependent on the properties of BC-DOC as well as the increasing BC-DOC content. BC-DOC with higher aromaticity, larger molecular size, higher polarity, and more humic-like matters had a greater promoting effect on the water-solubility of triclocarban. This study highlights that biochar may promote the solubility of some organic pollutants (e.g., triclocarban) in aqueous environment and enhance their potential risk.

The role of magnesium ion in the interactions between humic acid and tetracycline in solution

Coexisting tetracycline (TC), dissolved organic matter (DOM), and metal cations in aqueous environments might form complexes and consequently affect the environmental fate of TC. In this study, the interactions among coexisting humic acid (HA), TC, and Mg(II) in solutions were investigated by equilibrium dialysis batch experiments and nuclear magnetic resonance hydrogen spectroscopy (1H NMR) characterization. In the binary systems, the dimethylamine (4Me2NH+) functional group on the A-ring of TC bound to the oxygen-containing functional groups of HA via hydrogen bond. The solution pH affected the agglomeration morphology and dissociation of the oxygen-containing functional groups of HA as well as protonation and spatial conformation of TC, which in turn affected the HA-TC interactions. The complexation sites and ratio of Mg(II) on TC affect the binding mode in the ternary system. When the TC-Mg(II) complexation ratio is 1:1, the B, C, and D rings of TC preferentially complex with Mg(II), resulting in the change of TC from an extended to a twisted conformation. At this time, Mg(II) had a weaker inhibitory effect on binding affinity between HA and TC. When the complexation ratio was 1:2, the second Mg(II) complexation deactivated the 4Me2NH + on the A ring and further stabilized TC twisted conformation, resulting in a stronger inhibitory effect on the binding of TC to HA. Under acidic conditions, the solution pH mainly caused the difficulty in forming TC-Mg(II) complexes. The inhibitory effect of Mg(II) on the binding between HA and TC is weaker than that under alkaline conditions.

Nano-biochar as a potential amendment for metal(loid) remediation: Implications for soil quality improvement and stress alleviation

Metal(loid) contamination of agricultural soils has become an alarming issue due to its detrimental impacts on soil health and global agricultural production. Therefore, environmentally sustainable and cost-effective solutions are urgently required for soil remediation. Biochar, particularly nano-biochar, exhibits superior and high-performance capabilities in the remediation of metal(loid)-contaminated soil, owing to its unique structure and large surface area. Current researches on nano-biochar mainly focus on safety design and property improvement, with limited information available regarding the impact of nano-biochar on soil ecosystems and crop defense mechanisms in metal(loid)-contaminated soils. In this review, we systematically summarized recent progress in the application of nano-biochar for remediation of metal(loid)-contaminated soil, with a focus on possible factors influencing metal(loid) uptake and translocation in soil-crop systems. Additionally, we conducted the potential/related mechanisms by which nano-biochar can mitigate the toxic impacts of metal(loid) on crop production and security. Furthermore, the application of nano-biochar in field trials and existing challenges were also outlined. Future studies should integrate agricultural sustainability and ecosystem health targets into biochar design/selection. This review highlighted the potential of nano-biochar as a promising soil amendment for enhancing the remediation of metal(loid)-contaminated agricultural soils, thereby promoting the synthesis and development of highly efficient nano-biochar towards achieving environmental sustainability.

Physiological and biochemical effects of biochar nanoparticles on spinach exposed to salinity and drought stresses

The utilization of nanobiochar in agricultural practices has garnered substantial interest owing to its promising potential. Its nano-size particles possess an enhanced ability to infiltrate plant cells, potentially instigating biochemical and physiological responses that augment stress tolerance. In our study, we aimed to assess the impact and extent of exogenously applied nanobiochar on the growth dynamics and antioxidative responses in Spinacia oleracea L. (spinach) plants subjected to salt stress (50 mM NaCl) and drought stress (maintained at 60% field capacity) compared with respective controls (0 mM NaCl and 100% field capacity). Following a 15-day exposure to stress conditions, nanobiochar solution (at concentrations of 0, 1, 3, and 5% w/v) was sprayed on spinach plants at weekly intervals (at 14, 21, and 28 days after sowing). The foliar application of nanobiochar markedly improved biomass, net assimilation rate, leaf area, and various other growth parameters under drought and salinity stress conditions. Notably, the application of 3% nanobiochar caused the most significant enhancement in growth traits, photosynthetic pigments, and nutrient content, indicating its efficiency in directly supplying nutrients to the foliage. Furthermore, under drought stress conditions, the application of 3% nanobiochar elicited a notable 62% increase in catalase activity, a two-fold rise in peroxidase activity, and a 128% increase in superoxide dismutase activity compared to the control (without nanobiochar). Additionally, nanobiochar application enhanced membrane stability, evidenced by reduced lipid peroxidation and electrolyte leakage. The foliar application of 3% nanobiochar was found as a promising strategy to significantly enhance spinach growth parameters, nutrient assimilation, and antioxidative defense mechanisms, particularly under conditions of drought and salinity stress.

Biochar-derived dissolved and particulate matter effects on the phytotoxicity of polyvinyl chloride nanoplastics

Nanoplastics in environments are potentially detrimental to plant growth. Appropriate doses of biochar can alleviate the phytotoxicity of nanoplastics under hydroponic conditions. However, the specific mechanisms remain unknown. In this study, the effects of biochar-derived dissolved matter (BCDM) and biochar-derived particulate matter (BCPM) on the phytotoxicity of polyvinyl chloride (PVC) nanoplastics were investigated and the underlying influencing mechanisms were elucidated. The results showed that PVC nanoplastics can be adsorbed and taken up by lettuce roots, inducing oxidative damage to lettuce shoots and roots and reducing their fresh weight. BCDM can promote the aggregation and sedimentation of PVC nanoplastics, and BCPM can adsorb PVC nanoplastics and cause barrier effect, which will reduce the exposure dose of PVC nanoplastics. Furthermore, nutrients in BCDM can promote lettuce growth. As a result, the presence of both BCDM and BCPM significantly mitigated the oxidative stress of lettuce shoots and roots as demonstrated by the decrease in hydrogen peroxide and malondialdehyde levels (p < 0.05). Meanwhile, lettuce biomass was significantly increased after addition of BCDM and BCPM compared to the single PVC treatment group (p < 0.05). This study provides a theoretical basis for finding solutions to alleviate the phytotoxicity of nanoplastics.

Waste-derived nanobiochar: A new avenue towards sustainable agriculture, environment, and circular bioeconomy

The greatest challenge for the agriculture sector in the twenty-first century is to increase agricultural production to feed the burgeoning global population while maintaining soil health and the integrity of the agroecosystem. Currently, the application of biochar is widely implemented as an effective means for boosting sustainable agriculture while having a negligible influence on ecosystems and the environment. In comparison to traditional biochar, nano-biochar (nano-BC) boasts enhanced specific surface area, adsorption capacity, and mobility properties within soil, allowing it to promote soil properties, crop growth, and environmental remediation. Additionally, carbon sequestration and reduction of methane and nitrous oxide emissions from agriculture can be achieved with nano-BC applications, contributing to climate change mitigation. Nonetheless, due to cost-effectiveness, sustainability, and environmental friendliness, waste-derived nano-BC may emerge as the most viable alternative to conventional waste management strategies, contributing to the circular bioeconomy and the broader goal of achieving the Sustainable Development Goals (SDGs). However, it's important to note that research on nano-BC is still in its nascent stages. Potential risks, including toxicity in aquatic and terrestrial environments, necessitate extensive field investigations. This review delineates the potential of waste-derived nano-BC for sustainable agriculture and environmental applications, outlining current advancements, challenges, and possibilities in the realms from a sustainability and circular bioeconomy standpoint.

Nano-biochar uptake and translocation by plants: Assessing environmental fate and food chain risk

Nano-biochar (N-BC) is an emerging nanomaterial with potential applications in various fields. Understanding its behavior in the environment and its interaction with plants is crucial for assessing its ecological implications and potential risks to the food chain. In this study, we investigated the absorption and transportation of N-BC by wheat and Chinese cabbage plants using microscopy techniques and stable isotope analysis. Our results revealed that N-BC particles were readily absorbed by the plants through their root systems and transported to the aboveground tissues. Scanning electron microscopy and transmission electron microscopy provided visual evidence of N-BC particles inside the plants, predominantly located in the xylem and cell walls of the cortical tissue. Stable isotope analysis confirmed the uptake and transportation of N-BC, with elevated isotopic values observed in the plant tissues exposed to 13C-N-BC. Our results demonstrated that around 50.2 %-52.4 % of the absorbed N-BC by plants was accumulated in the roots of wheat and Chinese cabbage, and the remaining fraction was transferred to the shoots including steam (31.0 %-32.1 %) and leaf (16.5 %-17.6 %). Importantly, we observed significant accumulation of N-BC in the edible parts of Chinese cabbage, raising concerns about its potential entry into the food chain and associated health risks. These findings highlight the need for further research to explore the specific pathways and modes of N-BC uptake and transport in plants. Monitoring the presence of N-BC in the environment and its potential impact on the food chain is crucial for ensuring food security and safeguarding human health.

Reduced colloidal phosphorus release from paddy soils: A synergistic effect of micro-/nano-sized biochars and intermittent anoxic condition

Colloidal phosphorus (CP) has high mobility and great loss risk; their biogeochemical processes are influenced by agricultural management such as redox oscillation and biochar-amendment application. This study monitored CP concentration in pore-water, soil P species and P adsorption capacity, to investigate CP release from paddy soils as affected by the interactive effects of oxygen status (continuous anoxic/oxic for 12 days, CA/CO; intermittent anoxic for 2, 4, 6, 8, 10 days during the 12-day cycle, IA2-10) and management (soil only, CK; bulk/micro/nano-sized biochar with various properties: SBBulk, SBMicro, and SBNano). Compared to the control (0.25-0.84 mg L-1, CK-CA), the single intermittent anoxic treatment (CK-IA) reduced CP concentrations by 45 %, due to the rise of Eh and pH and the decline of the degree of P saturation along with the increased soil Fe/Al-P and organic-P. Longer anoxic duration under the CK-IA reduced CP release, probably donated from massive production of redox-stable amorphous Fe/Al-bound P. The single biochar treatment (SB-CA: SBBulk-CA > SBMicro-CA > SBNano-CA) decreased CP release by 37 % as compared to the CK-CA, ascribed to the increased soil pH, Eh, and P adsorption capacity. The combined treatment (SB-IA: SBBulk-IA2 > SBNano-IA10) synergistically reduced CP release by 68 % in comparison with the CK-CA, due to the increase of adsorption through interactions of soil Fe/Al/Ca- and organic-P. Therefore, nano-sized biochar and long intermittent anoxic duration are recommended for reducing CP release from paddy soils.

Effects of chemical aging on carbonaceous materials: Stability of water-dispersible colloids and their influence on the aggregation of natural-soil colloid

Although hydrochar and biochar have been used as soil conditioners, there is not a clear understanding of how their properties changes due to aging impacts their colloidal particles behavior on the soil system. From this premise, we produced hydrochar and biochar from the same feedstock (cashew bagasse) and aged with different chemical methods: (i) using hydrogen peroxide, (ii) a mixture of nitric and sulfuric acids, and (iii) hot water. It was analyzed the effects of aging on the stability of the carbonaceous materials (CMs) colloids in aqueous medium with different ionic strength (single systems), as well as the stability of the natural-soil colloid when interacting with biochar and hydrochar colloids (binary systems). A chemical composition (C, H, N, and O content) change in CMs due to the chemically induced aging was observed along with minor structural modifications. Chemical aging could increase the amount of oxygen functional groups for both biochar and hydrochar, though in a different level depending on the methodology applied. In this sense, hydrochar was more susceptive to chemical oxidation than biochar. The effectiveness of chemical aging treatments for biochar increased in the order of water < acid < hydrogen peroxide, whereas for hydrochar the order was water < hydrogen peroxide < acid. While the increase in surface oxidation improved the biochar colloidal stability in water medium at different ionic strengths (single systems), the stability and critical coagulation concentration (CCC) slightly changed for hydrochar. Natural-soil clay (NSC) interactions with oxidized carbonaceous material colloids (binary systems) enhanced NSC stability, which is less likely to aggregate. Therefore, the aging of carbonaceous materials modifies the interaction and dynamics of soil small particles, requiring far more attention to the environmental risks due to their application over time.

Synthesis and characterization of nanobiochar from rice husk biochar for the removal of safranin and malachite green from water

Xenobiotic pollution in environment is a potential risk to marine life, and human health. Nanobiotechnology is an advanced and emerging solution for the removal of environmental pollutants. Adsorption-based technologies are being used to alleviate the global prevalence of xenobiotics like dyes, due to their high efficacy and cost effectiveness. Current study explored the potential of nanobiochar syntehsized via ultrasonication and centrifugation from rice husk for dye removal from water. It involves the synthesis of nanobiochar from rice husk biochar for removal of Safranin, Malachite green, and a mixture of both from aqueous water. Biochar was synthesized through pyrolysis at 600 °C for 2 h. To convert it into nanobiochar, sonication and centrifugation techniques were applied. The yield obtained was 27.5% for biochar and 0.9% for nanobiochar. Nanobiochar analysis through Fourier-Transform Spectrometer (FTIR), X-ray Power Diffraction (XRD) and scanning electron microscopy (SEM) suggested its crystalline nature having minerals rich in silicon, with a cracked and disintegrated carbon structure due to high temperature and processing treatments. Removal of dyes by nanobiochar was evaluated by changing different physical parameters i.e., nanobiochar dose, pH, and temperature. Pseudo-first order model and pseudo-second order model were applied to studying the adsorption kinetics mechanism. Kinetics for adsorption of dyes followed the pseudo-second order model suggesting the removal of dyes by process of chemical sorption. High adsorption was found at a higher concentration of nanobiochar, high temperature, and neutral pH. Maximum elimination percentages of safranin, malachite green, and a mixture of dyes were obtained as 91.7%, 87.5%, and 85% respectively. We conclude that nanobiochar could be a solution for dye removal from aqueous media.

Facile solvent-free modified biochar for removal of mixed steroid hormones and heavy metals: isotherm and kinetic studies

Water contamination has become a global challenge to human survival. Non-biodegradable heavy metal cations and steroid hormones could accumulate in the human body and could result in serious health problems. In this study, we prepared biochar from waste shells of African star apples and modified biochar using a solvent-free ball milling facile method. The X-ray photoelectron spectrometer (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis revealed biochar functional groups in C=C, C-O, and C=O. Brunauer Emmett Teller (BET) was used to determine the surface area, the surface area of ball-milled biochar obtained at 550 °C (BASA550) increased from 174 m2/g to 304 m2/g after modification. The Langmuir and Freundlich adsorption isotherms best described the experimental adsorption data with RL < 1 and 1/n < 1 and a high degree of agreement of R2 data; Langmuir (R2 = 0.9291-0.9992) and Freundlich (R2 = 0.9077-0.9974). The adsorption kinetic studies using pseudo-first-order and pseudo-second-order models revealed that the pseudo-second-order model accurately described the adsorption process). The application of the BASA550 for treating wastewater samples showed a good percentage of removal. The removal percentage for cadmium, nickel, and lead was recorded as 92.96%, 90.89%, and 90.29%, respectively. The percentage removal in the influent and effluent were found to be 85.06%, 83.87%, 84.73%, and 89.37%, 86.48%, and 87.40%, respectively. The maximum percentage removal of steroid hormones from ultrapure water ranged from 84.20 to 89.63%, while from the spiked effluent and influent the percentage removal of 78.91-87.81% and 73.58-84.51% were obtained. The reusability of the ball-milled biochar was investigated and the result showed that the adsorbent (BASA550) had a good reusability potential for the first four cycles.

Biochar as a carbonaceous material to enhance soil quality in drylands ecosystems: A review

Drylands are fragile environments that should be carefully managed to improve their quality and functions to achieve sustainable development. Their major problems involve low availability of nutrients and soil organic carbon content. Biochar effect on soil is a joint response of micro to nano sized biochar and soil characteristics. In this review, we attempt to carry out a critical analysis of biochar application to enhance dryland soil quality. Correlating the effects identified from its soil application, we explored the subjects that remains open in the literature. The relation of composition-structure-properties of biochar vary among pyrolysis parameters and biomass sources. Limitations in soil physical quality in drylands, such as low water-holding capacity, can be alleviated by applying biochar at a rate of 10 Mg ha-1 also resulting in beneficial effects on soil aggregation, improved soil porosity, and reduced bulk density. Biochar addition can contribute to the rehabilitation of saline soils, by releasing cations able to displaces sodium in the exchange complex. However, the recovery process of salt-affected soils might be accelerated by the association of biochar with another soil conditioners. This is a promising strategy especially considering the biochar alkalinity and variability in nutrients bioavailability to improve soil fertilization. Further, while higher biochar application rate (>20 Mg ha-1) might change soil C dynamics, a combination of biochar and nitrogen fertilizer can increase microbial biomass carbon in dryland systems. Other aspect of biochar soil application is the economic viability of scale-up production, which is mainly associate to pyrolysis process being biochar production the costliest stage. Nevertheless, the supplying of feedstock might also represent a great input on biochar final costs. Therefore, biochar-based technology is a big opportunity to improve fragile environments such as drylands, integrating sustainable technologies with regional development. Considering the specificity of application area, it might be a model of sustainable agricultural practices protecting the environment in a bioeconomic perspective.

Nano-biochar: recent progress, challenges, and opportunities for sustainable environmental remediation

Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size reduction to nano-meters level. Nano-biochar presents remarkable physico-chemical behavior in comparison to macro-biochar including; higher stability, unique nanostructure, higher catalytic ability, larger specific surface area, higher porosity, improved surface functionality, and surface active sites. Nano-biochar efficiently regulates the transport and absorption of vital micro-and macro-nutrients, in addition to toxic contaminants (heavy metals, pesticides, antibiotics). However an extensive understanding of the recent nano-biochar studies is essential for large scale implementations, including development, physico-chemical properties and targeted use. Nano-biochar toxicity on different organisms and its in-direct effect on humans is an important issue of concern and needs to be extensively evaluated for large scale applications. This review provides a detailed insight on nanobiochar research for (1) development methodologies, (2) compositions and properties, (3) characterization methods, (4) potentiality as emerging sorbent, photocatalyst, enzyme carrier for environmental application, and (5) environmental concerns.

Co-transport of biochar nanoparticles (BC NPs) and rare earth elements (REEs) in water-saturated porous media: New insights into REE fractionation

The present study investigated the co-transport behavior of three REEs³⁺ (La³⁺, Gd³⁺, and Yb³⁺) with and without biochar nanoparticles (BC NPs) in water-saturated porous media. The presence of REEs³⁺ enhanced the retention of BC NPs in quartz sand (QS) due to decreased electrostatic repulsion between BC NPs and QS, enhanced aggregation of BC NPs, and the contribution of straining. The distribution coefficients (K_D) in packed columns in the co-transport of BC NPs and three REEs³⁺ were much smaller than in batch experiments due to the different hydrodynamic conditions. In addition, we, for the first time, found that REE fractionation in the solid-liquid phase occurred during the co-transport of REEs³⁺ in the presence and absence of BC NPs. Note that the REE fractionation during the co-transport, which is helpful for the tracing application during earth surface processes, was driven by the interaction of REEs³⁺ with QS and BC NPs. This study elucidates novel insights into the fate of BC NPs and REEs³⁺ in porous media and indicates that (i) mutual effects between BC NPs and REE³⁺ should be considered when BC was applied to REE contaminated aquatic and soil systems; and (ii) REE fractionation provides a useful tool for identifying the sources of coexisting substances.

Disintegration of biochar adsorbent under the hydraulic conditions of fixed bed water treatment

Recent studies have provided promising evidence for potential applications of biochar in environmental engineering, including its use as an alternative carbonaceous adsorbent for water and wastewater treatment. Carbonaceous adsorbents, such as activated carbon and biochar, are prone to disintegration and erosion due to water flow, potentially leading to the co-transport of hazardous contaminants with eroded fine particles (1 μm or smaller). Despite its significance in overall performance assessment, the stability and erodibility of biochar as an adsorbent in fixed bed water treatment have received limited research attention. This paper presents the results of a series of filtration tests and microscopic examinations to evaluate the disintegration of activated carbon and three types of biochar filters under the hydraulic conditions of fixed bed filtration. A novel testing design was employed to study the effects of fluid velocities and ionic strengths on disintegration, mass loss, and the morphology of granular adsorbents before and after water flushing. The results indicate that disintegration of both activated carbon and biochar is continuous but exhibits different behaviour with pore volume. Although fluid velocity influenced erosion rates, minimal differences were observed in overall mass loss. Ionic strength had a more pronounced impact on the erodibility and stability of particles in suspension by altering electrical conductivity and Zeta potential. Disintegration of hardwood biochar was found to be comparable to that of activated carbon; however, impurities in biochar (elements other than carbon and oxygen) are more likely to be flushed out, creating additional pathways for co-transport of contaminants.

Effects of particle size and pyrolytic temperature of biochar on the transformation behavior of antibiotic resistance genes

Rampant use of antibiotics has caused a rapid dissemination of antibiotic resistance genes (ARGs) in environment, posing great threats to ecosystems and human health. Applying biochar (BC) in natural systems to combat the spread of ARGs arises as an attention-grabbing solution. Unfortunately, the effectiveness of BC is still unmanageable due to the incomprehensive knowledge over correlations between BC properties and extracellular ARGs transformation. To pinpoint the crucial factors, we primarily explored transformation behaviors of plasmid-mediated ARGs exposed to BC (in suspensions or extraction solutions), adsorption capacities of ARGs on BC, and growth inhibition of E. coli imposed by BC. Specifically, the effects of BC properties including particle size (large-particulate 150 μm and colloidal 0.45-2 μm) and pyrolytic temperature (300, 400, 500, 600, and 700 °C) on the ARGs transformation were emphasized. Results showed that both large-particulate BC and colloidal BC, irrespective of their pyrolytic temperature, would induce significant inhibitory effects on the ARGs transformation, while the BC extraction solutions showed little effect except BC pyrolyzed at 300 °C. Correlation analysis uncovered that the inhibition effect of BC on ARGs transformation was tightly correlated with its adsorption capacity towards plasmid. Accordingly, greater inhibitory effects from those BCs with higher pyrolytic temperatures and smaller particle sizes mainly originated from their greater adsorption capacities. Intriguingly, E. coli was unable to ingest the plasmid adsorbed on BC, which led to ARGs blocked outside the cell membrane, although this inhibitory effect was partially affected by survival inhibition of BC on E. coli. Particularly, significant plasmid aggregation could occur in the extraction solution of large-particulate BC pyrolyzed at 300 °C, leading to a significant inhibition of ARGs transformation. Overall, our findings complete the insufficient understanding over the effects of BC on ARGs transformation behavior, and potentially provide new insights to scientific communities in mitigating ARGs spreading.

Biochar conductivity and electron donating capability control Cr(VI) bioreduction

Biochar can facilitate Cr(VI) bioreduction, but it is still undetermined which biochar property control this process. We observed that the apparent Cr(VI) bioreduction by Shewanella oneidensis MR-1 could be identified as a fast and a relatively slow processes. The fast-bioreduction rates (rf0) were 2-15 times higher than the slow-bioreduction rates (rs0). In this study, we investigated the kinetics and efficiency of biochar in promoting Cr(VI) reduction by S. oneidensis MR-1 in the neutral solution using a "dual-process model" (fast and slow processes), and analyzed the mechanisms of biochar concentration, conductivity, particle size and other properties on these two processes. The correlation analysis of these rate constants and biochar properties was carried out. The fast-bioreduction rates were associated with higher conductivity and smaller particle sizes of biochar, which facilitated the direct electron transfer from Shewanella oneidensis MR-1 to Cr(VI). The Cr(VI) slow-bioreduction rates (rs0) were mainly determined by the electron donating capability of biochar and independent of the cell concentration. Our results suggested that Cr(VI) bioreduction was mediated by both electron conductivity and redox potential of biochar. This result is instructive for biochar production. Manipulating biochar properties to control fast and slow Cr(VI) reduction may be helpful to effectively remove or detoxify Cr(VI) in the environment.

Electron exchange capacity of pyrogenic dissolved organic matter (pyDOM): complementarity of square-wave voltammetry in DMSO and mediated chronoamperometry in water

Pyrogenic dissolved organic matter (pyDOM) is derived from black carbon, which is important in the global carbon cycle and other biogeochemical redox processes. The electron-exchange capacity (EEC) of pyDOM has been characterized in water using mediated chronoamperometry (MCA), which gives precise results under specific operational conditions, but the broader significance of these EECs is less clear. In this study, we described a novel but complementary electrochemical approach to quantify EECs of pyDOM without mediation using square-wave voltammetry (SWV) in dimethyl sulfoxide (DMSO). Using both the SWV and MCA methods, we determined EECs for 10 pyDOMs, 6 natural organic matter (NOM) samples, and 2 model quinones. The two methods gave similar EECs for model quinones, but SWV gave larger EECs than MCA for NOM and pyDOM (by several-fold and 1-2 orders of magnitude, respectively). The differences in the EECs obtained by SWV and MCA likely are due to multiple factors, including the potential range of electrons sampled, kinetics of electron transfer from (macro)molecular structures, and coupling of electron and proton transfer steps. Comparison of the results obtained by these two methods should provide new insights into important environmental processes such as carbon-cycling, wildfire recovery, and contaminant mitigation using carbon-based amendments.

Carbon content determines the aggregation of biochar colloids from various feedstocks

The aggregation kinetics of biochar colloids (BCs) play a crucial role in the fate and transport of contaminants, as well as the carbon (C) cycle in the environment. However, the colloidal stability of BCs from various feedstocks is very limited. In this study, the critical coagulation concentration (CCC) of twelve standard biochars pyrolyzed from various feedstocks (municipal source, agricultural waste, herbaceous residue, and woody feedstock) at 550 °C and 700 °C were investigated, and the relationship between the physicochemical characteristics of biochar and the colloidal stability of BCs was further analyzed. The CCC of BCs in the NaCl solution followed the trend of municipal source < agricultural waste < herbaceous residue < woody feedstock, which was similar to the order of C content in biochar. The CCC of BCs showed a strong positive correlation with the C content of various biochars, especially pyrolyzed at a higher temperature of 700 °C. The BCs derived from lignin-rich feedstock (e.g., woody feedstock) had the highest colloidal stability, followed by cellulose-rich feedstock (e.g., agricultural waste and herbaceous residue). The BCs derived from organic matter-rich feedstock (municipal source) were easy to aggregate in the aqueous environment. This study quantitatively provides new insights into the relationship between BCs stability and biochar characteristics from various feedstocks, which is critical to assess biochar environmental behavior in aqueous environments.

Potential disintegration and transport of biochar in the soil-water environment: A case study towards purple soil

Biochar has been widely applied in soil and water. However, the fate and transport of biochar are not yet fully understood. Here, biochar's disintegration, transport, and the effect of temperature on biochar transport in soil (purple soil)-water systems were investigated. The results showed that the potentially transportable components (PTC) of biochar for corn straw, wheat straw, rice straw, rice husk and wood biochar reached 6.22-7.60%, 5.96-12.29%, 11.77-12.45%, 5.34-6.26% and 5.08-6.14% by mass, respectively. An external force (ultrasound exposure) intensified the physical disintegration, including colloidal and nanoparticles from larger particles, thereby increasing the transport potential. The mass recovery rates of PTC for rice straw biochar after penetrating through soil at 5, 20 and 35 °C reached 44.25%, 32.97% and 10.98%, respectively, which was supported by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory results. Elevated temperatures increased the hydrodynamic average diameter of PTC, and the Zeta potential of PTC and soil at 35 °C were less negative than those at 5 and 20 °C. As a result, biochar's transportability decreases with increasing temperature in the soil-water system, during which the enhanced PTC aggregation and the decreased electrostatic repulsion between biochar and soil particles played a crucial role. The increase in electrical conductivity in the soil-water system may be the main reason for the decrease in electrostatic repulsion at higher temperatures. The findings are helpful for an in-depth understanding of the environmental fate and managing the transport risk of biochar.

Recent advances in nanomaterials based sustainable approaches for mitigation of emerging organic pollutants

Emerging organic pollutants (EOPs) are a category of pollutants that are relatively new to the environment and recently garnered a lot of attention. The majority of EOPs includes endocrine-disrupting chemicals (EDCs), antibiotic resistance genes (ARGs), pesticides, dyes and pharmaceutical and personal care products (PPCPs). Exposure to contaminated water has been linked to an increase in incidences of malnutrition, intrauterine growth retardation, respiratory illnesses, liver malfunctions, eye and skin diseases, and fatalities. Consequently, there is a critical need for wastewater remediation technologies which are effective, reliable, and economical. Conventional wastewater treatment methods have several shortcomings that can be addressed with the help of nanotechnology. Unique characteristics of nanomaterials (NMs) make them intriguing and efficient alternative in wastewater treatment strategies. This review emphasis on the occurrence of divers emerging organic pollutants (EOPs) in water and their effective elimination via different NMs based methods with in-depth mechanisms. Furthermore, it also delves the toxicity assessment of NMs and critical challenges, which are crucial steps for practical implementations.

Nanobiochar and Copper Oxide Nanoparticles Mixture Synergistically Increases Soil Nutrient Availability and Improves Wheat Production

Recently, nanomaterials have received considerable attention in the agricultural sector, due to their distinctive characteristics such as small size, high surface area to volume ratio, and charged surface. These properties allow nanomaterials to be utilized as nanofertilizers, that can improve crop nutrient management and reduce environmental nutrient losses. However, after soil application, metallic nanoparticles have been shown to be toxic to soil biota and their associated ecosystem services. The organic nature of nanobiochar (nanoB) may help to overcome this toxicity while maintaining all the beneficial effects of nanomaterials. We aimed to synthesize nanoB from goat manure and utilize it with CuO nanoparticles (nanoCu) to influence soil microbes, nutrient content, and wheat productivity. An X-ray diffractogram (XRD) confirmed nanoB synthesis (crystal size = 20 nm). The XRD spectrum showed a distinct carbon peak at 2θ = 42.9°. Fourier-transform spectroscopy of nanoB's surface indicated the presence of C=O, C≡N-R, and C=C bonds, and other functional groups. The electron microscopic micrographs of nanoB showed cubical, pentagonal, needle, and spherical shapes. NanoB and nanoCu were applied alone and as a mixture at the rate of 1000 mg kg^-1 soil, to pots where wheat crop was grown. NanoCu did not influence any soil or plant parameters except soil Cu content and plant Cu uptake. The soil and wheat Cu content in the nanoCu treatment were 146 and 91% higher, respectively, than in the control. NanoB increased microbial biomass N, mineral N, and plant available P by 57, 28, and 64%, respectively, compared to the control. The mixture of nanoB and nanoCu further increased these parameters, by 61, 18, and 38%, compared to nanoB or nanoCu alone. Consequently, wheat biological, grain yields, and N uptake were 35, 62 and 80% higher in the nanoB+nanoCu treatment compared to the control. NanoB further increased wheat Cu uptake by 37% in the nanoB+nanoCu treatment compared to the nanoCu alone. Hence, nanoB alone, or in a mixture with nanoCu, enhanced soil microbial activity, nutrient content, and wheat production. NanoB also increased wheat Cu uptake when mixed with nanoCu, a micronutrient essential for seed and chlorophyll production. Therefore, a mixture of nanobiochar and nanoCu would be recommended to farmers for improving their clayey loam soil quality and increasing Cu uptake and crop productivity in such agroecosystems.

Particle size of biochar significantly regulates the chemical speciation, transformation, and ecotoxicity of cadmium in biochar

The pyrolysis of biomass containing excessive heavy metals is likely to produce heavy metal contaminated biochar (BC). Although multiple lines of evidence indicate that higher charring temperature leads to enhanced immobilization of heavy metals in BC, we find that particle size could also play a critical role in the content of heavy metals in BC and BC ecotoxicity. Here, BC derived from cadmium (Cd) enriched rice straw was prepared at different temperatures (300-600 °C) and divided into macro-, colloidal-, and nano-sized fractions, respectively. The content and chemical forms of Cd in BC fractions as well as related algal toxicity were examined. The results show that for the same temperature BC the content of Cd followed an order of colloidal-BC > macro-BC > nano-BC; and the residual fractions of Cd significantly decreased (3.47-16.08%) while that of acid soluble and reducible fractions significantly increased (4.13-16.51% and 0.24-1.71%, respectively) with decreasing particle size of BC. Consistently, colloidal-BC exhibited the highest ecotoxicity for Scenedesmus obliquus. The acid soluble fractions of Cd in macro- and colloidal-BC played a dominating role in their algal toxicity (p < 0.05). However, the ecotoxicity of nano-BC was more dependent on the total content of Cd than specific fractions probably due to the phagocytosis by algal cells. These results indicate that the chemical forms and ecotoxicity of Cd in BC could be remarkably modified by its particle size, which has profound implications for understanding the behavior and potential risk of heavy metal contaminated BC in the environment.

Pyrolysis Atmospheres and Temperatures Co-Mediated Spectral Variations of Biochar-Derived Dissolved Organic Carbon: Quantitative Prediction and Self-Organizing Maps Analysis

Biochar-derived dissolved organic carbon (BDOC), as a highly activated carbonaceous fraction of biochar, significantly affects the environmental effect of biochar. This study systematically investigated the differences in the properties of BDOC produced at 300-750 °C in three atmosphere types (including N₂ and CO₂ flows and air limitation) as well as their quantitative relationship with biochar properties. The results showed that BDOC in biochar pyrolyzed in air limitation (0.19-2.88 mg/g) was more than that pyrolyzed in N₂ (0.06-1.63 mg/g) and CO₂ flows (0.07-1.74 mg/g) at 450-750 °C. The aliphaticity, humification, molecular weight, and polarity of BDOC strongly depended on the atmosphere types as well as the pyrolysis temperatures. BDOC produced in air limitation contained more humic-like substances (0.65-0.89) and less fulvic-like substances (0.11-0.35) than that produced in N₂ and CO₂ flows. The multiple linear regression of the exponential form of biochar properties (H and O contents, H/C and (O+N)/C) could be used to quantitatively predict the bulk content and organic component contents of BDOC. Additionally, self-organizing maps could effectively visualize the categories of fluorescence intensity and components of BDOC from different pyrolysis atmospheres and temperatures. This study highlights that pyrolysis atmosphere types are a crucial factor controlling the BDOC properties, and some characteristics of BDOC can be quantitatively evaluated based on the properties of biochar.

Insight into the Speciation of Heavy Metals in the Contaminated Soil Incubated with Corn Cob-Derived Biochar and Apatite

Soil heavy metal contamination is a severe issue. The detrimental impact of contaminated heavy metals on the ecosystem depends on the chemical form of heavy metals. Biochar produced at 400 °C (CB400) and 600 °C (CB600) from corn cob was applied to remediate Pb and Zn in contaminated soil. After a one month amendment with biochar (CB400 and CB600) and apatite (AP) with the ratio of 3%, 5%, 10%, and 3:3% and 5:5% of the weight of biochar and apatite, the untreated and treated soil were extracted using Tessier's sequence extraction procedure. The five chemical fractions of the Tessier procedure were the exchangeable fraction (F1), carbonate fraction (F2), Fe/Mn oxide fraction (F3), organic matter (F4), and residual fraction (F5). The concentration of heavy metals in the five chemical fractions was analyzed using inductively coupled plasma mass spectroscopy (ICP-MS). The results showed that the total concentration of Pb and Zn in the soil was 3023.70 ± 98.60 mg kg^-1 and 2034.33 ± 35.41 mg kg^-1, respectively. These figures were 15.12 and 6.78 times higher than the limit standard set by the United States Environmental Protection Agency (U.S. EPA 2010), indicating the high level of contamination of Pb and Zn in the studied soil. The treated soil's pH, OC, and EC increased significantly compared to the untreated soil (p > 0.05). The chemical fraction of Pb and Zn was in the descending sequence of F2 (67%) > F5 (13%) > F1 (10%) > F3 (9%) > F4 (1%) and F2~F3 (28%) > F5 (27%) > F1 (16%) > F4 (0.4%), respectively. The amendment of BC400, BC600, and apatite significantly reduced the exchangeable fraction of Pb and Zn and increased the other stable fractions including F3, F4, and F5, especially at the rate of 10% of biochar and a combination of 5:5% of biochar and apatite. The effects of CB400 and CB600 on the reduction in the exchangeable fraction of Pb and Zn were almost the same (p > 0.05). The results showed that CB400, CB600, and the mixture of these biochars with apatite applied at 5% or 10% (w/w) could immobilize lead and zinc in soil and reduce the threat to the surrounding environment. Therefore, biochar derived from corn cob and apatite could be promising materials for immobilizing heavy metals in multiple-contaminated soil.

Recent Advances in the Investigation of Poly(lactic acid) (PLA) Nanocomposites: Incorporation of Various Nanofillers and their Properties and Applications

Poly(lactic acid) (PLA) is considered the most promising biobased substitute for fossil-derived polymers due to its compostability, biocompatibility, renewability, and good thermomechanical properties. However, PLA suffers from several shortcomings, such as low heat distortion temperature, thermal resistance, and rate of crystallization, whereas some other specific properties, i.e., flame retardancy, anti-UV, antibacterial or barrier properties, antistatic to conductive electrical characteristics, etc., are required by different end-use sectors. The addition of different nanofillers represents an attractive way to develop and enhance the properties of neat PLA. Numerous nanofillers with different architectures and properties have been investigated, with satisfactory achievements, in the design of PLA nanocomposites. This review paper overviews the current advances in the synthetic routes of PLA nanocomposites, the imparted properties of each nano-additive, as well as the numerous applications of PLA nanocomposites in various industrial fields.

Physicochemical properties of nanosized biochar regulated by heat treatment temperature dictates algal responses: From the perspective of fatty acid metabolism

Nanosized biochar (NBC) is an important fraction of biochar (BC) as it can exert nano-scale effects on aquatic organisms, attracting increasing research attention. However, effects of different physicochemical properties of NBC on biological responses at the metabolic and gene expression level are not comprehensively understood. Here, biological effects of NBCs pyrolyzed at different heat treatment temperatures (HTTs, 350-700 °C) were evaluated using freshwater algae Chlorella vulgaris, from the perspectives of growth and fatty acid (FA) profile changes. NBC pyrolyzed at 700 °C (N700) induced the greatest algal growth inhibition and oxidative stress than N350 and N500. In addition, NBC exposure to 50 mg/L increased saturated and monounsaturated FAs, along with a decrease in polyunsaturated FAs (PUFAs). Exposure to NBC also significantly influenced the expression of key FA metabolism genes (3fad, sad, kasi and accd), demonstrating the potential role of reactive oxygen species-mediated PUFA reduction accompanied by increased membrane permeability in algal toxicity upon NBC exposure. The observed differences in response to N700 were attributed to its smaller particle size and higher abundance of -COOH. These findings reveal the underlying mechanisms in the algal response to NBCs and provide valuable guidance for the safe design and application of BC materials.

Hydrochar more effectively mitigated nitrous oxide emissions than pyrochar from a coastal soil of the Yellow River Delta, China

Application of char amendments (e.g., pyrochar or biochar, hydrochar) in degraded soils is proposed as a promising solution for mitigating climate change via carbon sequestration and greenhouse gases (GHGs) emission reduction. However, the hydrochar-mediated microbial modulation mechanisms underlying N₂O emissions from coastal salt-affected soils, one of essential blue C ecosystems, were poorly understood. Therefore, a wheat straw derived hydrochar (SHC) produced at 220 °C was prepared to investigate its effects on N₂O emissions from a coastal salt-affected soil in the Yellow River Delta and to distinguish the microbial regulation mechanisms in comparison with corresponding pyrochar pyrolyzed at 500 °C (SPC) using a 28-day soil microcosm experiment. Compared with SPC, the acidic SHC (pH 4.15) enriched in oxygenated functional groups, labile C and N constituents. SHC application more efficiently depressed cumulative soil N₂O emissions (48.4-61.1 % vs 5.57-45.2 %) than those of SPC. SHC-induced inhibition of ammonia-oxidizing gene (amoA)-mediated nitrification and promotion of full reduction of N₂O to N₂ by nitrous oxide reductase gene (nosZ) were the underlying microbial mechanisms. Structural equation models further revealed that SHC-modulated bacterial N-transformation responses, i.e., inhibited nitrification and promoted heterotrophic denitrification, mainly contributed to reduced N₂O emissions, whereas modification of soil properties (e.g., decreased pH, increased total C content) by SPC dominantly accounted for decreased N₂O emissions. These results address new insights into microbial regulation of N₂O emission reduction from the coastal salt-affected soils amended with hydrochar, and provide the promising strategies to enhance C sequestration and mitigate GHG emissions in the blue C ecosystems.

The aggregation of natural inorganic colloids in aqueous environment: A review

Natural inorganic colloids (NICs) are the most common and dominant existence in the ecosystem, with high concentration and wide variety. In spite of the low toxicity, they can alter activity and mobility of hazardous engineered nanoparticles (ENPs) through different interactions, which warrants the necessity to understand and predict the fate and transport of NICs in aquatic ecosystems. Here, this review summarized NICs properties and behaviors, interaction mechanisms and environmental factors at the first time. Various representative NICs and their physicochemical properties were introduced across the board. Then, the aggregation and sedimentation behaviors were discussed systematically, mainly concerning the heteroaggregation between NICs and ENPs. To speculate their fate and elucidate the corresponding mechanisms, the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) and extended DLVO (X-DLVO) theories were focused. Furthermore, a range of intrinsic and extrinsic factors was presented in different perspective. Last but not the least, this paper pointed out theoretical and analytical gaps in current researches, and put forward suggestions for further research, aiming to provide a more comprehensive and original perspective in the fields of natural occurring colloids.

Chemical Fractionations of Lead and Zinc in the Contaminated Soil Amended with the Blended Biochar/Apatite

Heavy metal contamination in agricultural land is an alarming issue in Vietnam. It is necessary to develop suitable remediation methods for environmental and farming purposes. The present study investigated the effectiveness of using peanut shell-derived biochar to remediate the two heavy metals Zn and Pb in laboratory soil assays following Tessier’s sequential extraction procedure. The concentration of heavy metals was analyzed using Inductively coupled plasma mass spectrometry (ICP-MS). This study also compared the effectiveness of the blend of biochar and apatite applied and the mere biochar amendment on the chemical fractions of Pb and Zn in the contaminated agricultural soil. Results have shown that the investigated soil was extremely polluted by Pb (3047.8 mg kg−1) and Zn (2034.3 mg kg−1). In addition, the pH, organic carbon, and electrical conductivity values of amended soil samples increased with the increase in the amendment’s ratios. The distribution of heavy metals in soil samples was in the descending order of carbonate fraction (F2) > residue fraction (F5) > exchangeable fraction (F1) > Fe/Mn oxide fraction (F3) > organic fraction (F4) for Pb and F5 ≈ F2 > F1 > F3 > F4 for Zn. The peanut shell-derived biochar produced at 400 °C and 600 °C amended at a 10% ratio (PB4:10 and PB6:10) could significantly reduce the exchangeable fraction Zn from 424.82 mg kg−1 to 277.69 mg kg−1 and 302.89 mg kg−1, respectively, and Pb from 495.77 mg kg−1 to 234.55 mg kg−1 and 275.15 mg kg−1, respectively, and immobilize them in soil. Amending the biochar and apatite combination increased the soil pH, then produced a highly negative charge on the soil surface and facilitated Pb and Zn adsorption. This study shows that the amendment of biochar and biochar blended with apatite could stabilize Pb and Zn fractions, indicating the potential of these amendments to remediate Pb and Zn in contaminated soil.

Enhancement of biogas production from individually or co-digested green algae Cheatomorpha linum using ultrasound and ozonation treated biochar

This paper proposes the use of modified biochar, derived from Sawdust (SD) biomass using sonication (SSDB) and Ozonation (OSDB) processes, as an additive for biogas production from green algae Cheatomorpha linum (C. linum) either individually or co-digested with natural diet for rotifer culture (S. parkel). Brunauer-Emmett-Teller (BET), Fourier-Transform Infrared (FTIR), thermal-gravimetric (TGA), and X-ray diffraction (XRD) analyses were used to characterize the generated biochar. Ultrasound (US) specific energy, dose, intensity and dissolved ozone (O₃) concentration were also calculated. FTIR analyses proved the capability of US and ozonation treatment of biochar to enhance the biogas production process. The kinetic model proposed fits successfully with the data of the experimental work and the modified Gompertz models that had the maximum R² value of 0.993 for 150 mg/L of OSDB. The results of this work confirmed the significant impact of US and ozonation processes on the use of biochar as an additive in biogas production. The highest biogas outputs 1059 mL/g VS and 1054 mL/g VS) were achieved when 50 mg of SSDB and 150 mg of OSDB were added to C. linum co-digested with S. parkle.

Carrier-free nanoplatforms from natural plants for enhanced bioactivity

BACKGROUND

Natural plants as well as traditional Chinese medicine have made outstanding contributions to the health and reproduction of human beings and remain the basis and major resource for drug innovation. Carrier-free nanoplatforms completely self-assembled by pure molecules or therapeutic components have attracted increasing attention due to their advantages of improved pharmacodynamics/pharmacokinetics, reduced toxicity, and high drug loading. In recent years, carrier-free nanoplatforms produced by self-assembly from natural plants have contributed to progress in a variety of therapeutic modalities. Notably, these nanoplatforms based on the interactions of components from different natural plants improve efficiency and depress toxicity.

AIM OF REVIEW

In this review, different types of self-assembled nanoplatforms are first summarized, mainly including nanoassemblies of pure small molecules isolated from different plants, extracellular vesicles separated from fresh plants, charcoal nanocomponents obtained from charred plants, and nanoaggregates from plants formulae decoctions. Key Scientific Concepts of Review: We mainly focus on composition, self-assembly mechanisms, biological activity and modes of action. Finally, a future perspective of existing challenges with respect to the clinical application of plant-based carrier-free nanoplatforms is discussed, which may be instructive to further develop effective carrier-free nanoplatforms from natural plants in the future.