Toxicity of Three Crystalline TiO2 Nanoparticles in Activated Sludge: Bacterial Cell Death Modes Differentially Weaken Sludge Dewaterability

Responses of colonization and development of periphytic biofilms to three typical tire wear particles with or without incubation-aging in migrating aqueous phases

Understanding the behavior of tire wear particles (TWPs) and their impact on aquatic environments after aging is essential. This study explored the characteristics of TWPs generated using different methods (rolling friction, sliding friction, and cryogenic milling) and their transformation after exposure to environmental conditions mimicking runoff and sewage, focusing on their effects on river water and periphytic biofilms. Laboratory experiments indicate that at low exposure levels (0.1 mg/L), TWPs promoted biofilm growth, likely due to zinc release acting as a nutrient and the aggregation of particles serving as biofilm scaffolds. However, at higher concentrations (100 mg/L), TWPs inhibited biofilm development. This inhibition is linked to toxic byproducts like N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone and environmentally persistent free radicals, which reduce biofilm biomass, alter algal diversity, and decrease the production of essential biofilm components such as proteins and polysaccharides, consistent with the inhibitory behavior of TWPs on bis-(3'-5')-cyclic diguanosine monophosphate and quorum sensing signals, including acyl-homoserine lactone and autoinducer-2. Aging processes, particularly after simulated sewage treatment, further affect ecological impacts of TWPs, reducing the benefits observed at low concentrations and intensifying the negative effects at high concentrations. Contribution of here lies in systematically revealing the impact of TWPs on the development of aquatic biofilms, emphasizing the logical relationship between their aging characteristics, environmental behavior, and ecological risks. It assesses not only the release effects of typical additives and conventional size effects but also highlights the emerging photochemical toxicity (persistent free radicals), thus providing valuable insights into the aquatic ecological risk assessment of TWPs.

New insight into enhanced carbon recovery from anaerobic fermentation of waste activated sludge with cation exchange resin coupled with NaCl pretreatment

Carbon recovery from waste activated sludge has been attracting considerable attention. However, the migration and transformation patterns of carbon sources between the phases have rarely been reported. In this study, a novel strategy using cation exchange resin (CER) coupled with sodium chloride (NaCl) to enhance carbon recovery through anaerobic fermentation (AF) was proposed. The results demonstrated that CER coupled with NaCl destroyed OH and CO stretching in amide I while promoting the formation of β-sheet and random coil structures, leading to sludge disintegration. This significantly improved the kinetics of endogenous carbon release, resulting in the release of 1146.33 mg/L of carbon from the solid sludge into the liquid phase. Approximately 75.61 % of the initial carbon source was bio-transformed into short-chain fatty acids. Correspondingly, carbon recovery was significantly increased up to 852.23 mg C/L, 4.57 times that of the control. Mechanism exploration revealed that carbon source recovery was significantly elevated by the synergistic effect of CER and NaCl. CER effectively removed high-valence cations from extracellular polymeric substance (EPS), weakening its bridging and adsorption-electro neutralization capabilities, promoting protein deflocculation, and triggering EPS disruption to release extracellular carbon sources. NaCl disrupted the ionic strength and distribution inside and outside microbial cells, creating an osmotic pressure difference that resulted in cell plasmolysis and lysis, ultimately inducing the release of intracellular carbon sources. Economic and carbon emission reduction benefit analyses verified that the CER coupled with NaCl pretreatment is a cost-effective sludge treatment strategy. This study illustrates the carbon source migration and transformation pathways in the CER coupled with NaCl-assisted AF process, providing guidance for sustainable sludge management.

Acute inhibitory effects of tire wear particles on the removal of biological phosphorus：The critical role of aging in improving environmentally persistent free radicals

A comparative study explored how photoaging, ozonation aging, and Fenton aging affect tire wear particles (TWPs) and their phosphorus (P) removal in activated sludge. Aging altered TWPs' properties, increasing surface roughness, porosity, and generating more small particles, especially environmental persistent free radicals (EPFRs) in ozonation and Fenton aging. Post-aging TWPs (50 mg/L) inhibited sludge P removal significantly (p<0.05), with rates of 44.3% and 59.6% for ozonation and Fenton aging, respectively. In addition, the metabolites involved in P cycling (poly-β-hydroxyalkanoates: PHA and glycogen) and essential enzymes (Exopolyphosphatase: PPX and Polyphosphate kinase: PPK) were significantly inhibited (p<0.05). Moreover, TWPs led to a decrease in microbial cells within the sludge and altered the community structure, a situation exacerbated by the aging of TWPs. P-removing bacteria decreased (e.g., Burkholderia, Candidatus), while extracellular polymeric substance-secreting bacteria increased (e.g., Pseudomonas, Novosphingobium). Pearson correlation analysis highlighted EPFRs' role in TWPs' acute toxicity to microbial cells, yet, emphasizing particle size's impact on the sludge system's purification and community structure.

Efficient phosphorus recovery from waste activated sludge: Pretreatment with natural deep eutectic solvent and recovery as vivianite

Recycling phosphorus from waste activated sludge (WAS) is an effective method to address the nonrenewable nature of phosphorus and mitigate environmental pollution. To overcome the challenge of low phosphorus recovery from WAS due to insufficient disintegration, a method using a citric acid-based natural deep eutectic solvent (CA-NADES) assisted with low-temperature pretreatment was proposed to efficiently release and recover phosphorus. The results of 31P nuclear magnetic resonance (NMR) confirmed that low-temperature pretreatment promoted the conversion of organic phosphorus (OP) to inorganic phosphorus (IP) and enhanced the effect of CA-NADES. Changes in the three-dimensional excitation-emission matrix (3D-EEM) and flow cytometry (FCM) indicated that the method of CA-NADES with low-temperature thermal simultaneously release IP and OP by disintegrating sludge flocs, dissolving extracellular polymeric substances (EPS) structure, and cracking cells. When 5 % (v/v) of CA-NADES was added and thermally treated at 60 °C for 30 min, 43 % of total phosphorus (TP) was released from the sludge. The concentrations of proteins and polysaccharides reached 826 and 331 mg/L, respectively, which were 6.30 and 14.43 times higher than those of raw sludge. The dewatering and settling of the sludge were also improved. Metals were either enriched in the solid phase or released into the liquid phase in small quantities (most efficiencies of less than 10 %) for subsequent clean recovery. The released phosphorus was successfully recovered as vivianite with a rate of 90 %. This study develops an efficient, green, and sustainable method for phosphorus recovery from sludge using NADES and provides new insights into the high-value conversion of sludge.

Short-term exposure to triclocarban alters microbial community composition and metabolite profiles in freshwater biofilms

Triclocarban (TCC), an emerging contaminant in water environments, its effects on freshwater biofilms remain insufficiently understood. This study investigates the effects of TCC exposure (at concentrations of 10 μg L-1 and 10 mg L-1) on mature freshwater biofilms. TCC was found to inhibit biofilm activity as evidenced by changes in surface morphology and the ratio of live/dead cells. Moreover, both concentrations of TCC were observed to modify the structure of the biofilm community. Metabolomics analysis revealed an overlap in the toxicity mechanisms and detoxification strategies triggered by various concentrations of TCC in biofilms. However, the higher toxicity induced by 10 mg L-1 TCC resulted from the downregulation of proline betaine, disrupting the homeostasis of cellular osmotic pressure regulation in biofilms. Notably, lipid and lipid-like molecules showed high sensitivity to different concentrations of TCC, indicating their potential as biomarkers for TCC exposure. Annotation of the differential metabolites by KEGG revealed that alterations in amino acid and carbon metabolism constituted the primary response mechanisms of biofilms to TCC. Moreover, the biofilm demonstrated enhanced nucleic acid metabolism, which bolstered resistance against TCC stress and heightened tolerance. Furthermore, elevated TCC concentrations prompted more robust detoxification processes for self-defense. Overall, short-term exposure to TCC induced acute toxicity in biofilms, yet they managed to regulate their community structure and metabolic levels to uphold oxidative homeostasis and activity. This research contributes to a deeper comprehension of TCC risk assessment and policy control in aquatic environments.

A novel approach for sludge deep-dewatering via flowing-out enhancement but not relying on cell lysis and bound water release

Effective deep-dewatering is crucial for wastewater sludge management. Currently, the dominant methods focus on promoting cell lysis to release intracellular water, but these techniques often lead to secondary pollution and require stringent conditions, limiting their practical use. This study explores an innovative method using a commercially available complex quaternary ammonium salt surfactant, known as G-agent. This agent remarkably reduces the sludge water content from 98.6 % to 56.8 % with a low dosage (50 mg/g DS) and under neutral pH conditions. This approach surpasses Fenton oxidation in terms of dewatering efficiency and avoids the necessity for cell lysis and bound water release, thereby reducing the risk of secondary pollution in the filtrate, including heavy metals, nitrogen, phosphorus, and other contaminants. The G-agent plays a significant role in destabilizing flocs and enhancing flocculation during the conditioning and initial dewatering stages, effectively reducing the solid-liquid interfacial affinity of the sludge. In the compression filtration stage, the agent's solidification effect is crucial in forming a robust skeleton that improves pore connectivity within the filter cake, leading to increased water permeability, drainage performance and water flow-out efficiency. This facilitates deep dewatering of sludge without cell lysis. The study reveals that the G-agent primarily improves water flow-out efficiency rather than water flowability, indicating that cell lysis and bound water release are not indispensable prerequisites for sludge deep-dewatering. Furthermore, it presents an encouraging prospect for overcoming the limitations associated with conventional sludge deep-dewatering processes.

Enhancing bioavailable carbon sources and minimizing ammonia emissions in distillery sludge and distiller's grains waste co-composting through deep eutectic solvent addition

This study introduced two deep eutectic solvents, ChCl/oxalic acid (CO) and ChCl/ethylene glycol (CE), into a 34-day co-composting process of distillery sludge and distiller's grains waste to address challenges related to NH3 emissions. The addition of DES increased dissolved organic carbon by 68% to 92%, offering more utilizable carbon for microorganisms. SYTO9/PI staining and enzyme activity tests showed the CE group had higher bacterial activity and metabolic levels during the thermophilic phase than the control. Bacterial community analysis revealed that early dominance of Lactobacillus and Lysinibacillus in CE accelerated the onset of the thermophilic phase, reduced pile pH, and significantly decreased urease production by reducing Ureibacillus. Consequently, CE treatment substantially dropped NH3 emissions by 73% and nitrogen loss by 54%. Besides, CE fostered a more abundant functional microbial community during the cooling and maturation phases, enhancing deep degradation and humification of organic matter.

Risk implications induced by behaviors of artificial and pavement-generated TWPs in river water: Role of particle-self properties and incubation aging

Here, we investigated the pristine properties of three typical tire wear particles (TWPs) and their aging properties after incubation in runoff (primary aging) and sewage (further aging), and captured the differences in the behavioral characteristics of nine TWPs in river water, with a view to paving the way for revealing the intrinsic mechanism of the hydroecological effects of TWPs. Our results highlight that the generation modes of three pristine tire wear particles (TWPs), stemming from typical tire and road wear processes-specifically, rolling friction (R-TWPs) and sliding friction (S-TWPs), alongside cryogenically milled tire treads (C-TWPs)-significantly impact their pristine physicochemical properties. This impact encompasses surface structure, particle size (D [4,3]: 8.5-121.3 μm), surface potential (-10.4 ∼ -1.8 mV), contact angle (95.2-129.8°), density (1.09-1.75 kg/m3), etc., consequently, these differences significantly influence their migration capability and sorption capacity during the incubation and aging in runoff and sewage. Interestingly, after incubation and aging in the migrating aqueous phase, particularly with additional aging in sewage, not only do distinctions in the aforementioned physicochemical properties (namely, particle size (5.6-6.6 μm), surface potential (-18.4 ∼ -18.1 mV), contact angle (124.5-125.4°), density (1.05-1.16 kg/m3)) among various types of TWPs diminish, but the environmental behaviors (encompassing, desorption capacity, aggregation kinetics, photochemical activity-formation of persistent free radicals, and exudation-derivative (6PPD-Quinone) of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine: 6PPD) exhibited by this array of TWPs demonstrate a remarkable coherence within the downstream river water. Concerningly, the aforementioned features of aquatic system behaviors appear to be predisposed towards exacerbating the heightened toxicity of TWPs, for example, the leaching concentration of 6PPD-Q increased by two to three times after aging, aligning with established precedents regarding the toxicological causes associated with the quinone derivatives of antioxidants in rubber contaminants.

Optimizing sludge retention time for sustainable photo-enhanced biological phosphorus removal systems: Insights into nutrient fate, microbial community, and bacterial phototolerance

Photo-enhanced Biological Phosphorus Removal (PEBPR) systems, promising wastewater treatment technology, offer efficient phosphorus removal without external oxygen. However, comprehending the impact of sludge retention time (SRT) on the system is crucial for successful implementation. This study investigated the SRT effect on nutrient fate, microbial community, and bacterial phototolerance in PEBPR systems. PEBPR systems exhibited good bacterial phototolerance at SRT of 10, 15, and 20 d, with optimal phosphorus-accumulation metabolism observed at SRT of 10 and 15d. However, at SRT of 5d, increased light sensitivity and glycogen-accumulating organisms (GAOs) growth resulted in poor P removal (71.9%). Accumulibacter-IIC were the dominant P accumulating organisms (PAOs) at SRT of 10, 15, and 20 d. Accumulibacter-I, IIC and IIF were the major PAOs at SRT of 5 d. The decrease in SRT promoted the microalgal population diversity, and Dictyosphaerium and Chlorella were the major microalgal species in this study. Flow cytometry results revealed high light intensity triggered intracellular Fe2+ efflux, limiting translation activity and metabolism. Moreover, PAOs had lower phototolerance than GAOs due to Poly-P bound intracellular Mg2+ affecting enzyme activity. This study provides an in-depth understanding of PEBPR systems operation strategy toward environmentally sustainable wastewater treatment.

Differential cytotoxicity to human cells in vitro of tire wear particles emitted from typical road friction patterns: The dominant role of environmental persistent free radicals

Tire wear particles (TWPs) have been recognized as one of the major sources of microplastics (MPs), however, effects of initial properties and photochemical behavior of TWPs on cytotoxicity to human cells in vitro have not been reported. Therefore, here, three TWPs generated from typical wear of tires and pavements (i.e., rolling friction (R-TWPs) and sliding friction (S-TWPs)) and cryogenically milled tire tread (C-TWPs), respectively, and their photoaging counterparts were used to study the reasons for their differential cytotoxicity to 16HBE cells in vitro. Results showed in addition to changes of surface structure and morphology, different preparation methods could also induce formation of different concentration levels of environmental persistent free radicals (EPFRs) (from 1.24 to 3.06 × 1017 spins/g with g-factors ranging 2.00307-2.00310) on surfaces of TWPs, which contained 7.3%-65.8% of reactive EPFRs (r-EPFRs). Meanwhile, photoaging for 90 d could strengthen formation of EPFRs (from 4.03 to 4.61 × 1017 spins/g) with containing 74.7%-78.1% r-EPFRs on surfaces of TWPs and improve their g-factor indexes (ranging 2.00309-2.00313). At 100 μg mL-1 level, compared to C-TWPs, both R-TWPs and S-TWPs (whether photoaging or not) carried higher intensity EPFRs could significantly inhibit 16HBE cells proliferation activity, cause more cells oxidative stress and induce more cell apoptosis/necrosis and secretion of inflammatory factor (P < 0.05). However, regardless of how TWPs were prepared, photoaged or not, exposure at a concentration of 1 μg mL-1 appeared to be non-acute cytotoxic. Correlation analysis suggested dominant toxicity of TWPs was attributed to the formation of r-EPFRs on their surfaces, which could promote accumulation of excess reactive oxygen species in cells and the massive deposition of intracellular particles. This study provides direct evidence of TWPs cytotoxicity, and underlining the need for a better understanding of the influences of initial properties and photochemical characteristics on risk assessment of TWPs released into the environment.

Promoting dewatering efficiency of sludge by bioleaching coupling chemical flocculation

In recent years, bioleaching has emerged as a cost-effective technology for enhancing the dewaterability of sludge. However, the lengthy treatment time involved in sludge bioleaching processes limits daily treatment capacity for sludge. Here, a novel approach was developed through a short time of sludge bioleaching with A. ferrooxidans LX5 (A. f) and A. thiooxidans TS6 (A. t) followed by polyferric sulfate (PFS) flocculation (A. f + A. t + PFS). After 12.5 h of the A. f + A. t + PFS treatment (30% A. f, 10% A. t, 40 mg/g DS S0, 60 mg/g DS FeSO4•7H2O, and 120 mg/g DS PFS), the reduction efficiency of specific resistance to filtration (SRF) and sludge cake moisture content reached 94.0% and 11.6%, respectively, which were comparable to the results achieved through 24 h of completed bioleaching treatment. In pilot-scale applications, the mechanical dewatering performance was notably improved following A. f + A. t + PFS treatment, with the low moisture content of the treated sludge cake (∼59.2%). This study provides new insights into the A. f + A. t + PFS process and holds potential for developing efficient and promising sludge dewatering strategies in engineering application.

Toxic effects of environmentally persistent free radicals (EPFRs) on the surface of tire wear particles on freshwater biofilms: The alleviating role after sewage-incubation-aging

The aquatic ecological risks posed by the surface-active components of tire wear particles (TWPs) are not fully understood. This study aimed to determine the acute (24 h exposure) aquatic toxicity effects of TWPs on freshwater biofilms in terms of total organic carbon (TOC), chlorophyll-a (Chl-a) abundance, quantum yield (ФM), and adenosine triphosphate (ATP). Three types of TWP were tested: TWPs produced via the typical wear of tires and roads (i.e., rolling friction (R-TWPs) and sliding friction (S-TWPs)) and cryogenically milled tire treads (C-TWPs). The results showed that the surface structural properties of the three TWPs differed significantly in morphology, bare composition, functional groups, and surface-active components (environmental persistent free radicals). The exposure of biofilms to the TWPs increased TOC and ATP at low concentrations (1 mg L-1) but inhibited them at high concentrations (50 mg L-1). All TWP types inhibited biofilm photosynthesis (reduced Chl-a and ФM) and altered the community structure of algae to varying degrees; in addition, the toxicity mechanisms of the TWPs contributed to the accumulation of reactive oxygen species and cell membrane (or cell-wall) fragmentation, leading to lactate dehydrogenase release. S-TWPs were the most toxic because their surface carried the highest environmental persistent free radicals. R-TWPs were the second most toxic, which was attributed to their smaller particle size. The toxicity of all TWPs was tested after sewage incubation aging. The results showed that the toxicity of all TWPs reduced as the sewage covered their surface components and active sites. This process also reduced the differences in toxicity among the TWPs. This study filled a research gap in our understanding of aquatic toxicity caused by the surface structural properties of tire microplastics and has implications for the study of microplastic biotoxicity mechanisms.

Response of viable bacteria to antibiotics in aerobic granular sludge: Resistance mechanisms and behaviors, bacterial communities, and driving factors

The assessment of antimicrobial resistance (AMR) risk by DNA-based techniques mainly relies on total bacterial DNA. In this case, AMR risk recognition is restricted to the genotype level, lacking crucial phenotypic information, such as the distribution of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) in dead and viable bacteria. This limitation hinders the recognition of AMR behavior. Herein, based on propidium monoazide (PMA) shielding method, this work firstly quantified the intracellular ARGs/MGEs in viable and dead bacteria, and the impact of viable bacteria composition on the formation of intracellular/extracellular polymeric substance-related /cell-free ARGs (i/e/cARGs) and MGEs (i/e/cMGEs) in aerobic granular sludge (AGS). The shielding efficiency of PMA against dead bacteria was optimized to be as high as 97.5% when the MLSS of AGS was 2.0 g/L. Under antibiotic stimulation, 29.0% ∼ 49.0% of iARGs/iMGEs were carried by viable bacteria, and the remaining proportion were carried by dead bacteria. 18 out of the top 20 dominant genera showed a change in abundance by more than 1% after PMA treatment. 29 viable hosts were identified to associate with 52 iARGs, of which 28 and 15 hosts were also linked to 40 eARGs and 26 cARGs. Also, partial least-squares path model and variance partitioning analysis disclosed that viable bacteria and i/e/cMGEs had a positive effect on i/e/cARGs, with both contributing as much as 64.5% to the total ARGs enrichment. These results better visualized the AMR risk carried by viable bacteria and the categories of viable hosts. This work provides a novel insight into analyzing the actual AMR risk and viable hosts, helping to the reduction and control of AMR in wastewater treatment plants.

Responses of Phragmites communis and its rhizosphere bacteria to different exposure sequences of molybdenum disulfide and levofloxacin

The effect of the molybdenum disulfide (MoS2)/levofloxacin (LVF) co-exposure was explored on Phragmites communis and rhizosphere soil bacterial communities. The sequence of MoS2/LVF exposure and the different MoS2 dosages (10 mg/kg and 100 mg/kg) contributed to different degrees of effect on the plant after 42 days of exposure. The treatment with priority addition of low dosage MoS2 significantly ameliorated P. communis growth, with root length growing up to 532.22 ± 46.29 cm compared to the sole LVF stress (200.04 ± 29.13 cm). Besides, MoS2 served as an alleviator and reduced the accumulation of reactive oxygen species (ROS) and malondialdehyde (MDA) in P. communis under LVF stress, and activated bacteria in rhizosphere soil. These rhizosphere soil microbes assisted in mitigating toxic pollution in the soil and inducing plant resistance to external stress, such as bacteria genera Bacillus, Microbacterium, Flavihumibacter and altererythrobacter. Potential functional profiling of bacterial community indicated the addition of MoS2 contributed to relieve the reduction in functional genes associated with amino acid metabolism and the debilitation of gram_negative and aerobic phenotypic traits caused by LVF stress. This finding reveals the effect of different exposure sequences of MoS2 nanoparticles and antibiotic for plant-soil systems.

Schwertmannite-based heterogeneous Fenton for enhancing sludge dewaterability over a wide pH range

Fe-based Fenton technology is commonly used to enhance sludge dewaterability, but it requires subsequent neutralization, resulting in excessive chemical consumption. In this study, we investigated the feasibility of using schwertmannite-composited Fe3O4 (Sch/Fe3O4) as a heterogeneous Fenton catalyst to enhance sludge dewaterability without the need for pH adjustment. A high reduction efficiency of sludge specific resistance to filtration (94.4%), moisture content (11.4%) and bound water (45.5%) after Sch/Fe3O4 +H2O2 treatment at initial pH 7.5 were obtained, suggesting that Sch/Fe3O4 +H2O2 posed good dehydration performance without any acidification. SO42- and H+ generation in Sch/Fe3O4 system played an important role in sludge pH decrease, which facilitated sludge cell lysis, intracellular water release, and provided a suitable pH for Fenton reaction. Reactive species (•OH, •O2-, and 1O2) from Sch/Fe3O4 +H2O2 could effectively destroy sludge EPS, releasing more bound water. Additionally, the negatively charged compounds were neutralized by dissolved Fe2+/Fe3+. Sch/Fe3O4, as a skeleton builder, rearranged the dissociative sludge flocs to improve the incompressibility and permeability of sludge cake. Finally, sludge treated with Sch/Fe3O4 +H2O2 achieved organic matters reserve, heavy metals reduction, further benefiting the final disposal.

Synthesis and characterization of TiO2 nanoparticles combined with geraniol and their synergistic antibacterial activity

BACKGROUND

The emergence of antibiotic resistance in pathogenic bacteria has become a global threat, encouraging the adoption of efficient and effective alternatives to conventional antibiotics and promoting their use as replacements. Titanium dioxide nanoparticles (TiO₂ NPs) have been reported to exhibit antibacterial properties. In this study, we synthesized and characterized TiO₂ NPs in anatase and rutile forms with surface modification by geraniol (GER).

RESULTS

The crystallinity and morphology of modified TiO₂ NPs were analyzed by UV/Vis spectrophotometry, X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) with elemental mapping (EDS). The antimicrobial activity of TiO₂ NPs with geraniol was assessed against Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), and Escherichia coli. The minimum inhibitory concentration (MIC) values of modified NPs ranged from 0.25 to 1.0 mg/ml against all bacterial strains, and the live dead assay and fractional inhibitory concentration (FIC) supported the antibacterial properties of TiO₂ NPs with GER. Moreover, TiO₂ NPs with GER also showed a significant decrease in the biofilm thickness of MRSA.

CONCLUSIONS

Our results suggest that TiO₂ NPs with GER offer a promising alternative to antibiotics, particularly for controlling antibiotic-resistant strains. The surface modification of TiO₂ NPs by geraniol resulted in enhanced antibacterial properties against multiple bacterial strains, including antibiotic-resistant MRSA. The potential applications of modified TiO₂ NPs in the biomedical and environmental fields warrant further investigation.

Disparate toxicity mechanisms of parabens with different alkyl chain length in freshwater biofilms: Ecological hazards associated with antibiotic resistome

As emerging organic pollutants, parabens are of global concern because of their ubiquitous presence and adverse effects. However, few researchers have addressed the relationship between parabens' structural features and toxicity mechanisms. This study conducted theoretical calculations and laboratory exposure experiments to uncover the toxic effects and mechanisms of parabens with different alkyl chains in freshwater biofilms. The result demonstrated that parabens' hydrophobicity and lethality increased with their alkyl-chain length, whereas the possibility of chemical reactions and reactive sites were unchanged despite the alkyl-chain length alteration. Due to the hydrophobicity variation, parabens with different alkyl-chain presented different distribution patterns in cells of freshwater biofilms and consequently induced distinct toxic effects and led to diverse cell death modes. The butylparaben with longer alkyl-chain preferred to stay in the membrane and altered membrane permeability by non-covalent interaction with phospholipid, which caused cell necrosis. The methylparaben with shorter alkyl-chain preferred to enter into the cytoplasm and influence mazE gene expression by chemically reacting with biomacromolecules, thereby triggering apoptosis. The different cell death patterns induced by parabens contributed to different ecological hazards associated with antibiotic resistome. Compared with butylparaben, methylparaben was more likely to spread ARGs among microbial communities despite its lower lethality.

Sulfide inhibition on polyphosphate accumulating organisms and glycogen accumulating organisms: Cumulative inhibitory effect and recoverability

Sulfate in wastewater can be reduced to sulfide and its impact on the stability of enhanced biological phosphorus removal (EBPR) is still unclear. In this study, the metabolic changes and subsequent recovery of polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs) were investigated at different sulfide concentrations. The results showed that the metabolic activity of PAOs and GAOs was mainly related to H2S concentration. Under anaerobic conditions, the catabolism of PAOs and GAOs was promoted at H2S concentrations below 79 mg/L S and 271 mg/L S, respectively, and inhibited above these concentrations; whereas anabolism was consistently inhibited in the presence of H2S. The phosphorus (P) release was also pH-dependent due to the intracellular free Mg2+ efflux from PAOs. H2S was more destructive to the esterase activity and membrane permeability of PAOs than those of GAOs and prompted intracellular free Mg2+ efflux of PAOs, resulting in worse aerobic metabolism and subsequent recovery of PAOs than GAOs. Additionally, sulfides facilitated the production of extracellular polymeric substances (EPS), especially tightly bound EPS. The amount of EPS in GAOs was significantly higher than that in PAOs. The above results indicated that sulfide had a stronger inhibition to PAOs than GAOs, and when sulfide was present, GAOs had a competitive advantage over PAOs in EBPR.

Mobility and bioaccessibility of arsenic (As) bound to titanium dioxide (TiO2) water treatment residuals (WTRs)

This work systematically describes arsenic mobility and potential bioaccessibility of arsenic-enriched titanium dioxide water treatment residuals (TiO₂ WTRs) by employing a suite of wet chemical experiments and spectroscopic measurements. Specifically, Environmental Protection Agency (EPA) digestion method 3051a indicated <3% of total arsenic in the solid phase was released, and arsenic assessed by EPA method 1340 for bioaccessibility was below detection limits. A novel finding is while the arsenic appeared to be stable under highly acidic digestion conditions, it is in fact highly mobile when exposed to simple phosphate solutions. On average, 55% of arsenic was extracted from all samples during a 50-day replenishment study. This was equivalent to 169 mg kg^-1 arsenic released from the solid phase. Macroscopic desorption experiments indicated arsenic likely formed inner-sphere bonds with the TiO₂ particles present in the samples. This was confirmed with X-ray absorption spectroscopy (XAS), where an interatomic distance of 3.32 Å and a coordination number (CN) of 1.79 titanium atoms were determined. This translates to a configuration of arsenic on TiO₂ surfaces as a bidentate binuclear inner-sphere complex. Thus, both macroscopic and spectroscopic data are in agreement. During incubation experiments, arsenic(V) was actively reduced to arsenic(III); the amount of arsenic(III) in solution varied from 8 to 38% of total dissolved arsenic. Lastly, elevated concentrations and mobility of vanadium in these systems merit further investigation. The high mobility of arsenic and its potential for reduction when reintroduced into the environment, particularly in agriculturally important areas, presents an important risk when waste products are not properly managed.

Analytical methods for assessing antimicrobial activity of nanomaterials in complex media: advances, challenges, and perspectives

Assessing the antimicrobial activity of engineered nanomaterials (ENMs), especially in realistic scenarios, is of great significance for both basic research and applications. Multiple analytical methods are available for analysis via off-line or on-line measurements. Real-world samples are often complex with inorganic and organic components, which complicates the measurements of microbial viability and/or metabolic activity. This article highlights the recent advances achieved in analytical methods including typical applications and specifics regarding their accuracy, cost, efficiency, and user-friendliness. Methodological drawbacks, technique gaps, and future perspectives are also discussed. This review aims to help researchers select suitable methods for gaining insight into antimicrobial activities of targeted ENMs in artificial and natural complex matrices.

Benzotriazole UV stabilizer-induced genotoxicity in freshwater benthic clams: A survey on apoptosis, oxidative stress, histopathology and transcriptomics

Benzotriazole UV stabilizer-329 (UV-329) is frequently detected in various environmental and biological matrices. However, the toxicity effect on freshwater benthos induced by UV-329 has rarely been described. In this study, genotoxicity, apoptosis, oxidative stress, histopathological alterations, siphoning behavior, and bioaccumulation in the gill and digestive gland of Corbicula fluminea exposed to UV-329 at 10, 100, and 1000 μg/L for 21 days were investigated. Toxicity screening using transcriptomics confirmed that UV-329 preferentially stimulated cellular process-related pathways including gap junctions, apoptosis, phagosomes and necroptosis. The transcript levels of a large number of apoptosis genes were significantly upregulated. This apoptosis mechanism was further confirmed by the fact that UV-329 exposure significantly increased the percentage of apoptotic cells, activated caspase-3, -8, and -9, and affected the antioxidant enzyme activities. Following exposure to 1000 μg/L UV-329, significant histological alterations were reflected in the corrosion of cilia, cellular swelling of epithelial cells in the gills, degeneration of digestive tubules, and necrosis of epithelial cells in the digestive glands. These results may aid in elucidating the toxicity mechanism of UV329 in bivalves and evaluating the hazards of UV-329 in benthic ecosystems.

Effects of tire wear particles with and without photoaging on anaerobic biofilm sulfide production in sewers and related mechanisms

Tire wear particles (TWPs) are considered to be one of the major sources of microplastics (MPs) in sewers; however, little has been reported on the surface properties and photochemical behavior of TWPs, especially in terms of their environmental persistent radicals, leachate type, and response after photoaging. It is also unknown how TWPs influence the production of common pollutants (e.g., sulfides) in anaerobic biofilms in sewers. In our study, the effects of cryogenically milled tire treads (C-TWPs) and their corresponding photoaging products (photoaging-TWPs, A-TWPs) on anaerobic biofilm sulfide production in sewers and related mechanisms were studied. The results showed that the two TWPs at a low concentration (0.1 mg L^-1) exerted no significant (p > 0.05) effects on sulfide yield, whereas exposure to a high concentration of TWPs (100 mg L^-1) inversely affected sulfide yield, with A-TWPs exerting a significant inhibitory effect on sulfide yield in the sewers (p < 0.01). The main reason was that A-TWPs carried higher concentrations of reactive environmental persistent radicals on their surfaces after photoaging than C-TWPs, which could induce the formation of oxygen radicals. In addition, A-TWPs were more uniformly distributed in the wastewater system and could penetrate the biofilm to damage bacterial cells, and their ability to leach polycyclic aromatic hydrocarbons and heavy metals such as zinc additives enhanced their toxic effects. In contrast, C-TWPs contributed significantly to sulfide production (p < 0.01), primarily because of their low biotoxicity, ability to leach a considerable amount of sulfide, and stimulatory effect on anaerobic biofilm surface sulfate-reducing bacteria. Our study complements the toxicity studies of the TWPs particles themselves and provides insight on a new influencing factor for determining the changes in sulfide generation and control measures in sewers.

Enhanced dewaterability of anaerobically fermented sludge through acid-driven indigenous enzymatic hydrolysis

The poor dewaterability of fermented sludge is an important factor limiting the development of anaerobic fermentation applications. Herein we reported an efficient strategy, i.e., using acidic regulation to stimulate the release of indigenous enzymes, to enhance the hydrolysis and dewatering of fermented sludge. The results showed that after acidic regulation at pH 4.0 for 1 day, the activity of protease and α-glucosidase were improved by 131.4% and 146.0%, while the capillary suction time and specific resistance to filtration were decreased by 93.8% and 69.5%, respectively. Mechanism study revealed that the method firstly destroyed the slime and bound EPS and cells of fermented sludge, causing the release of indigenous enzymes (i.e., protease and α-glucosidase) contained in. Then, the released enzymes directly accelerated the hydrolysis and acidification of fragmentized extracellular polymeric substances, thereby benefited the release of bound water in sludge particles. Finally, such acidic condition decreased the electrostatic repulsive interactions between destroyed sludge particles, further improving their flocculation. The findings not only deepen the understanding of indigenous enzymes contained in fermented sludge affecting sludge dewatering, but also might guide engineers to develop promising strategies to facilitate fermented sludge dewatering and fermentation liquid recovery in the future.

Self-regulation mechanism difference of Chlorella vulgaris and Scenedesmus obliquus in toxic sludge extract caused by hydroquinone biodegradation

Chlorella vulgaris (C. vulgaris) and Scenedesmus obliquus (S. obliquus) were compared to remove toxicity under conditions of sludge extract cultivation for 30 days. The toxicity of sludge extract, the growth characteristics, photosynthetic pigment, superoxide dismutase (SOD) enzyme and catalase (CAT) enzyme activities of the two microalgae were studied by contrast. The results showed that small molecular organic matter (<500 Da) was more easily utilized by microalgae. The toxicity in the toxic group of C. vulgaris and S. obliquus on the 30^th day decreased to 56.8 ± 1.2% and 60.7 ± 2.8%, respectively. In the toxic group, the maximal SOD enzyme activity of C. vulgaris and S. obliquus were 2.02 U/mg proteins and 8.21 U/mg proteins, respectively, demonstrating that toxicity caused more oxidative damage to S. obliquus than to C. vulgaris. Proteomics analysis revealed that C. vulgaris mainly regulates energy synthesis and distribution primarily through sugar metabolism, and biomass synthesis primarily through carbon metabolism, whereas S. obliquus mainly regulates energy synthesis and distribution primarily through sugar metabolism and oxidative phosphorylation, resulting in sludge toxicity stress regulation.

An effective titanium salt dosing strategy for phosphorus removal from wastewater: Synergistic enhancement of chemical and biological treatment

Titanium salt coagulant, as a new type of water treatment agent, has been widely studied, but most researches do not consider its effect on the biological treatment. In this study, different doses of TiCl₄ were added to the biological phosphorus removal (BPR) system to investigate the impact of TiCl₄ on BPR. The results showed that the addition of TiCl₄ not only significantly reduced the phosphorus concentration in effluent (below 0.5 mg/L), but also kept it stable. Moreover, the sedimentation performance of activated sludge was improved, which was superior to the control group. According to the results of flow cytometry (FCM), a small amount of TiCl₄ significantly improved the bioactivities, but excessive dosage caused inhibition. When the dosage of TiCl₄ below 20 mg/L, polyphosphate accumulating metabolism (PAM) was strengthened. In addition, the richness of microbial community and the relative abundance of Candidatus Accumulibacter clades also increased. However, when the dosage reached 60 mg/L, the relative abundance of Candidatus Competibacter increased and the BPR system was deteriorated. This study suggests that the addition of appropriate concentration of TiCl₄ can realize the synergistic enhancement of biological and chemical phosphorus removal in sewage treatment.

Size- and shape-dependent cytotoxicity of nano-sized Zr-based porphyrinic metal-organic frameworks to macrophages

The wide utilization of nano-sized metal-organic frameworks (NMOFs) leads to inevitable health risks to humans. Previous studies on health risks of NMOFs mainly focus on the cytotoxic tests of typical NMOFs，but lack sufficient studies on the effects of physiochemical characteristics of NMOFs on the cytotoxicity and the related mechanisms. Here, four kinds of Zr-based porphyrinic NMOFs (PCNs), including spherical 30, 90, and 180 nm PCN-224 and rod-like 90 nm PCN-222, were taken as a proof of the concept to investigate the effects of the size and shape of NMOFs on the cytotoxicity and related mechanisms to macrophages. The 30 nm spherical PCN-224 induced significant rupture of cell membrane and dissolved in lysosome, leading to the most significant cell necrosis among the studied other nano-sized PCNs. However, other studied PCNs showed insignificant membrane rupture and their dissolution in lysosome. Furthermore, the 90 nm-sized PCN-224 led to much more significant cell necrosis by inducing lysosome damage and inhibiting of autophagy flux than the rod-like 90 nm PCN-222. These findings reveal the size- and shape-dependent cytotoxicity of PCNs and the related mechanisms and are helpful to the assessment of the potential health risks of NMOFs and the safe application of NMOFs.

Exposure to nanoplastic induces cell damage and nitrogen inhibition of activated sludge: Evidence from bacterial individuals and groups

Wastewater treatment plants (WWTPs) are almost the only place where plastic fragments are artificially removed, resulting in mass accumulation of nanoplastics (NPs). In this research, four different concentrations (0 mg/L, 0.1 mg/L, 1 mg/L, 10 mg/L) of polystyrene nanoplastics (PS-NPs) were used to investigate the cell damage and nitrogen inhibition of activated sludge, exposed in a self-assembled SBR reactor for 30 days. Intracellular reactive oxides (ROS) and extracellular lactate dehydrogenase (LDH) increased with the rise of exposure concentration, and morphological analysis disclosed the creases, collapse, and even rupture of cell membranes. However, exposure damage (PS-NPs ≤ 1 mg/L) appeared to be reversible, attributed to that extracellular polymeric substances (EPS) secretion can thicken the three protective layers outside the membrane. PS-NPs did not disrupt the EPS chemical structure, but increased humic acid content. Prolonged exposure time (from 15 to 30 days) was directly related to the nitrogen inhibition. Due to the habitat changes under PS-NPs exposure, abundance and diversity of microorganisms in the original activated sludge decreased significantly, and the dominant phylum was occupied by Patescibacteria (PS-NPs = 10 mg/L). Changes in enzyme activities of AMO, NR, NIR, and NOR with exposure concentration may explain the conversion of nitrogen in SBR. This research broadens our horizons to understand the response mechanism of activated sludge bacteria to PS-NPs exposure individually and collectively.

A novel partial denitrification, anammox-biological phosphorus removal, fermentation and partial nitrification (PDA-PFPN) process for real domestic wastewater and waste activated sludge treatment

A novel process was developed for real domestic wastewater and waste activated sludge (WAS) treatment based on partial denitrification, anammox-biological phosphorus removal, fermentation and partial nitrification (PDA-PFPN). After 246 days of operation, the effluent concentrations of NH₄⁺-N, NO₂^--N and NO₃^--N were below detection limits (0.1 mg/L), and the effluent concentration of PO₄^3--P was 0.1 mg/L without the addition of external carbon source in PDA-PFPN system. Moreover, the sludge reduction efficiency reached 48.1% due to fermentation. The nitrite accumulation ratios by ammonia oxidation and nitrate reduction pathway were 60.6% and 87%, respectively. Intracellular metabolites measured by liquid chromatography mass spectrometer (LC-MS/MS) suggested that different intracellular amino acids were stored and consumed at different duration, and intracellular Valine, Glycine and Lysine were not utilized in oxic stage. Results of flow cytometry showed that the proportion of intact cells decreased from 94.7% to 82.9%, and necrotic cells increased from 5.3% to 17.1% with the increase of DNA content in sludge supernatant and cell decay rate, indicating the occurrence of cell death and lysis and leading to WAS reduction. Analysis of transcriptional community composition revealed that partial denitrification bacteria (Thauera), anammox bacteria (Candidatus Brocadia and Candidatus Kuenenia), simultaneous phosphorus removal and fermentation bacteria (Tetrasphaera) and partial nitrification bacteria (Nitrosomonas) coexisted and actually worked in PDA-PFPN system. The novel PDA-PFPN process simultaneously achieved highly efficient nitrogen and phosphorus removal and WAS reduction without the addition of external carbon source, which greatly reduced the operation cost of carbon source dosing and WAS treatment in wastewater treatment.

A review on the generation, discharge, distribution, environmental behavior, and toxicity (especially to microbial aggregates) of nano-TiO2 in sewage and surface-water and related research prospects

This article reviews the nano-effects and applications of different crystalline nano‑titanium dioxide (nano-TiO₂), identifies their discharge, distribution, behavior, and toxicity to aquatic organisms (focusing on microbial aggregates) in sewage and surface-water, summarizes related toxicity mechanisms, and critically proposes future perspectives. The results show that: 1) based on crystal type, application boundaries of nano-TiO₂ have become clear, extending from traditional manufacturing to high-tech fields; 2) concentration of nano-TiO₂ in water is as high as hundreds of thousands of μg/L (sewage) or several to dozens of μg/L (surface-water) due to direct application or indirect release; 3) water environmental behaviors of nano-TiO₂ are mainly controlled by hydration conditions and particle characteristics; 4) aquatic toxicities of nano-TiO₂ are closely related to their water environmental behavior, in which crystal type and tested species (such as single species and microbial aggregates) also play the key role. Going forward, the exploration of the toxicity mechanism will surely become a hot topic in the aquatic-toxicology of nano-TiO₂, because most of the research so far has focused on the responses of biological indicators (such as metabolism and damage), while little is known about the stress imprint caused by the crystal structures of nano-TiO₂ in water environments. Additionally, the aging of nano-TiO₂ in a water environment should be heeded to because the continuously changing surface structure is bound to have a significant impact on its behavior and toxicity. Moreover, for microbial aggregates, comprehensive response analysis should be conducted in terms of the functional activity, surface features, composition structure, internal microenvironment, cellular and molecular level changes, etc., to find the key point of the interaction between nano-TiO₂ and microbial aggregates, and to take mitigation or beneficial measures to deal with the aquatic-toxicity of nano-TiO₂. In short, this article contributes by 1) reviewing the research status of nano-TiO₂ in all aspects: application and discharge, distribution and behavior, and its aquatic toxicity; 2) suggesting the response mechanism of microbial aggregates and putting forward the toxigenic mechanism of nanomaterial structure; 3) pointing out the future research direction of nano-TiO₂ in water environment.

Detection and Characterization of TiO2 Nanomaterials in Sludge from Wastewater Treatment Plants of Chihuahua State, Mexico

TiO₂ nanoparticles (TiO₂-NPs) have a wide range of industrial applications (paintings, sunscreens, food and cosmetics) and is one of the most intensively used nanomaterials worldwide. Leaching from commercial products TiO₂-NPs are predicted to significantly accumulate in wastewater sludges, which are then often used as soil amendment. In this work, sludge samples from four wastewater treatment plants of the Chihuahua State in Mexico were obtained during spring and summer (2017). A comprehensive characterization study was performed by X-ray based (laboratory and synchrotron) techniques and electron microscopy. Ti was detected in all sludge samples (1810–2760 mg/kg) mainly as TiO₂ particles ranging from 40 nm up to hundreds of nm. Micro-XANES data was analyzed by principal component analysis and linear combination fitting enabling the identification of three predominant Ti species: anatase, rutile and ilmenite. Micro-XANES from the smaller Ti particles was predominantly anatase (68% + 32% rutile), suggesting these TiO₂-NPs originate from paintings and cosmetics. TEM imaging confirmed the presence of nanoscale Ti with smooth surface morphologies resembling engineered TiO₂-NPs. The size and crystalline phase of TiO₂-NPs in the sludge from this region suggest increased reactivity and potential toxicity to agro-systems. Further studies should be dedicated to evaluating this.

Effects of long-term perfluorooctane sulfonate (PFOS) exposure on activated sludge performance, composition, and its microbial community

The widespread presence and persistence of perfluorooctane sulfonate (PFOS) in wastewater treatment plants, as well as its toxicity and bioaccumulation potential, necessitates the investigation on their impact on bioreactor performance. A 48-day exposure test was adopted to study the effects of low (10 μg L-1) and high (1000 μg L-1) PFOS concentrations in a sequencing batch reactor on the performance, composition, and microbial community of activated sludge. The results suggested that adding PFOS at low and high concentrations lowered the removal efficiency of total nitrogen by 22.48% (p < 0.01) and 16.30% (p < 0.01) respectively, while enhanced that of total phosphorus by 1.87% (p > 0.05) and 7.07% (p < 0.05) respectively, compared with the control group. The addition of PFOS also led to the deterioration of activated sludge dewatering performance. Composition and spectroscopic measurements revealed that the PFOS dosage changed the composition of the activated sludge. Furthermore, the PFOS altered the structure and function of the activated sludge microbial community as well as key enzyme activities.

Effect of long-term low concentrations of TiO2 nanoparticles on dewaterability of activated sludge and the relevant mechanism: the role of nanoparticle aging

Nanoparticles can undergo aging phenomena in sewage treatment systems, which alter their physical and chemical properties. However, the effect of aged nanoparticles on the dewatering performance of activated sludge under long-term low concentrations is yet to be reported in sewage treatment systems. Here, we compared the chronic effects of pristine and aged TiO₂ nanoparticles on the sludge dewatering index, which includes specific resistance to filtration (SRF) and bound water (BW) in a sequencing batch reactor (SBR) at μg/L concentration levels, and analyzed the relevant mechanisms. The results indicated that aging in the sludge supernatant altered the photosensitivity and water stability of nanoparticles, which was mainly due to the changes in the zeta potential and energy band of the particle and was ultimately attributed to the combined effect of particle surface inclusions such as organic matter and inorganic salt. At 10 μg/L, nanoparticles reduced the sludge dewaterability, which observed an improvement at 100 μg/L. This is because 10 μg/L promoted the secretion of extracellular polymeric substances (EPS), which regulated the structure of sludge flora and increased the abundance of secreted quorum sensing-acyl-homoserine lactones (QS-AHL) and EPS genera, while the corresponding exposure results for 100 μg/L were the opposite, owing to the damage and necrosis effects caused by exposure under long-term light, which reduced EPS production and increased sludge density. Interestingly, aging could alleviate the effects of two exposure concentrations on sludge dewatering, mainly because of the decrease in the photoactivity of the nanoparticles. The results of this study show that environmental aging could delay, but not reverse the results of exposure to specific concentrations of nanoparticles. However, the significantly different ecological effects of photosensitive nanoparticles with two environmentally relevant concentration should be refined and confirmed again in freshwater environments to provide a basis for subsequent scientific management and control of photosensitive nanoparticles.

Achieving enhanced biological phosphorus removal utilizing waste activated sludge as sole carbon source and simultaneous sludge reduction in sequencing batch reactor

Achieving enhanced biological phosphorus removal dominated by Tetrasphaera utilizing waste activated sludge (WAS) as carbon source could solve the problems of insufficient carbon source and excessive discharge of WAS in biological phosphorus removal. Up to now, the sludge reduction ability of Tetrasphaera remained largely unknown. Furthermore, the difference between traditional sludge fermentation and sludge fermentation dominated by Tetrasphaera was still unclear. In this study, two different sequencing batch reactors (SBRs) were operated. WAS from SBR-parent was utilized as sole carbon source to enrich Tetrasphaera with the relative abundance of 91.9% in SBR-Tetrasphaera. PO₄^3--P removal and sludge reduction could simultaneously be achieved. The effluent concentration of PO₄^3--P was 0, and the sludge reduction efficiency reached about 44.14% without pretreatment of sludge. Cell integrity detected by flow cytometry, the increase of DNA concentration in the sludge supernatant and decrease of particle size of activated sludge indicated that cell death and lysis occurred in sludge reduction dominated by Tetrasphaera. Stable structure of activated sludge was also damaged in this process, which led to the sludge reduction. By analyzing the excitation-emission matrix spectra of extracellular polymeric substances and the changes of carbohydrate and protein concentration, this study proved that slowly biodegradable organics (e.g., soluble microbial byproduct, tyrosine and tryptophan aromatic protein) could be better hydrolyzed and acidized to volatile fatty acids (VFAs) in sludge fermentation dominated by Tetrasphaera than traditional sludge fermentation, which provided carbon source for biological nutrients removal and saved operation cost in wastewater treatment.

Influence of the Metabolic Activity of Microorganisms on Disinfection Efficiency of the Visible Light and P25 TiO2 Photocatalyst

The beneficial photocatalytic properties of UV light activated TiO2 powder are well-known and have been demonstrated with various pollutants and pathogens. However, traditionally observed photocatalytic activity of visible light activated pristine TiO2 is insignificant but there are a few studies which have reported that under some specific conditions commercially available TiO2 powder could at least partially disinfect microorganisms even under visible light. To better understand this phenomenon, in the current study we focused on bacteria response to the treatment by visible light and P25 TiO2 powder. More specifically, we analyzed the relationship between the bacteria viability, outer membrane permeability, metabolism, and its capacity to generate intracellular reactive oxygen species. During the study we assayed the viability of treated bacteria by the spread plate technique and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) reduction method. Changes in bacterial outer membrane permeability were determined by measuring the fluorescence of N-phenyl-1-naphthylamine (NPN). To detect intracellular reactive oxygen species formation, the fluorescence of dichlorodihydrofluorescein diacetate (DCFH-DA) was assayed. Results of our study indicated that TiO2 and wide spectrum visible light irradiation damaged the integrity of the outer membrane and caused oxidative stress in the metabolizing bacteria. When favorable conditions were created, these effects added up and unexpectedly high bacterial inactivation was achieved.

Nanotechnology for Targeted Detection and Removal of Bacteria: Opportunities and Challenges

The emergence of nanotechnology has created unprecedented hopes for addressing several unmet industrial and clinical issues, including the growing threat so-termed "antibiotic resistance" in medicine. Over the last decade, nanotechnologies have demonstrated promising applications in the identification, discrimination, and removal of a wide range of pathogens. Here, recent insights into the field of bacterial nanotechnology are examined that can substantially improve the fundamental understanding of nanoparticle and bacteria interactions. A wide range of developed nanotechnology-based approaches for bacterial detection and removal together with biofilm eradication are summarized. The challenging effects of nanotechnologies on beneficial bacteria in the human body and environment and the mechanisms of bacterial resistance to nanotherapeutics are also reviewed.

Cationic polyacrylamide alleviated the inhibitory impact of ZnO nanoparticles on anaerobic digestion of waste activated sludge through reducing reactive oxygen species induced

The enrichment of zinc oxide nanoparticles (ZnO NPs) in waste activated sludge (WAS) has raised concerns about their potential impact on anaerobic digestion of WAS. To date, there is no information regarding how to attenuate the negative effects of ZnO NPs on WAS anaerobic digestion. In this study, it was found that the appropriate amount of cationic polyacrylamide (cPAM) could mitigate the toxicity of ZnO NPs. During short-term exposure, the supplement of 4.0 mg cPAM/g TSS significantly restored biochemical methane potential from 28.6% inhibition to 9.3% inhibition compared with the control digester (P < 0.01). The spiked cPAM promoted the solubilization and acidification stages by weakening the contact between ZnO NPs and anaerobes in anaerobic digestion process, thus providing abundant substance for sequent bio-utilization. In the long-term semi-continues operated reactor, the continuous replacement of cPAM (at 4.0 mg/g TSS) significantly strengthened the recovery of VS destruction rate (20.3% to 26.4%, P < 0.01) and the daily yield of methane (93.5 mL/d to 124.2 mL/d, P < 0.01). Consistent with the restored performance, the application of cPAM increased the total microbial communities and the relative abundances of dominant acidogens and methanogens. Further explorations showed decreased toxicity of ZnO NPs primarily attributed to the decline of reactive oxygen species (ROS) induced by ZnO NPs.

Effects of TiO2 and ZnO nanoparticles on vermicomposting of dewatered sludge: studies based on the humification and microbial profiles of vermicompost

Nanoparticles (NPs) are prevalent in dewatered sludge, and their presence increases the environmental risks associated with the subsequent sludge treatment process. However, until now, their potential effects on sludge vermicomposting have not been clarified. This study investigated the effects of NPs on sludge humification and microbial profiles during vermicomposting by comparing fresh dewatered sludge substrates with substrates mixed with 0 mg/kg NPs (control), 100 mg/kg TiO₂, 500 mg/kg TiO₂, 100 mg/kg ZnO, and 500 mg/kg ZnO. The results showed that addition of TiO₂ and ZnO NPs to sludge did not significantly affect the growth rate of earthworms and the superoxide dismutase activity in their guts during vermicomposting. Moreover, higher concentrations of the selected NPs promoted the humification index of sludge by 20.7-49.6%, through the formation of polysaccharides, aromatic substances, and organic acids in final vermicomposts. Compared with the control without NP addition, bacterial community diversity was enhanced in treatments with TiO₂ and ZnO NPs, and dominant genera differed according to the type and concentration of NPs. This study suggests that the presence of TiO₂ and ZnO NP residuals modify the microbial community of sludge, thus promoting sludge humification during vermicomposting.

Deciphering the effects of CeO2 nanoparticles on Escherichia coli in the presence of ferrous and sulfide ions: Physicochemical transformation-induced toxicity and detoxification mechanisms

The physicochemical transformations as well as the redox reaction-induced toxicity changes of ceria nanoparticles (CeO₂ NPs) in reducing conditions is extremely lacking. Herein, the behaviors, chemical modifications and toxicity of CeO₂ NPs in the presence of reduction-active ions (namely Fe²⁺ and S^2-) were investigated, with a particular emphasis on the cytotoxicity mechanism associated with their physicochemical transformations. The presence of Fe²⁺ and S^2- differently altered the surface properties and toxicity of CeO₂ NPs. Redox reactions with Fe²⁺ led to form small aggregates, boosted the reduction of Ce^IVO₂ and enhanced dissolved Ce³⁺ concentration. Moreover, CeO₂ NPs possessed a high affinity for Escherichia coli (E. coli) and induced the generation of •OH abiotically after reaction with Fe²⁺, provoking serious disruption of cell membranes and causing high toxicity to E. coli. In contrast, the amending of S^2- protected E. coli from direct contact with CeO₂ NPs by creating new Ce₂S₃ precipitated on the surface, accelerating the aggregation of NPs and reducing the concentration of dissolved Ce³⁺. This study suggested that the chemical interactions between the reactive surfaces of CeO₂ and reduction-active ions highly determined the stability and cytotoxicity of CeO₂ NPs, which provides fundamental insights into the environmental risks of CeO₂ NPs.

Destroying the structure of extracellular polymeric substance to improve the dewatering performance of waste activated sludge by ionic liquid

The disposal and resource utilization of waste activated sludge (WAS) is a big challenge for its high moisture content. Ionic liquid (IL), 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM][OTf]), was innovatively used as a conditioner to improve the dewatering performance of WAS. The WAS was characterized by flocs size, three-dimensional excitation-emission matrix (3D-EEM), zeta potential, Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) for the investigation of intensification mechanism. The results showed that the dewatering performance of WAS conditioned by [EMIM][OTf] was significantly improved. The moisture content was successfully decreased to 64.99±0.92 %, and the intensification mechanism was investigated. The results showed that the structures of extracellular polymeric substance (EPS) were destroyed by [EMIM][OTf]. It brought a sharp decrease of the contents of polysaccharides (PS), proteins (PN), humic acid (HA) and fulvic acid (FA) in tightly bound extracellular polymeric substance (TB-EPS) structure. The inactivation of microbial cells promoted the disintegration of flocs. Large flocs were converted into unstable small particles and biopolymers. In addition, the negative charges of WAS were also neutralized for dissolution of biopolymers in [EMIM][OTf], and the electrostatic repulsion between flocs was weakened. [EMIM][OTf] was easily recycled five times. The research results indicate that specific IL, such as [EMIM][OTf], is a potential conditioner to improve the dewatering performance of WAS.

Excess sludge disintegration by discharge plasma oxidation: Efficiency and underlying mechanisms

A huge amount of excess sludge is inevitably produced in wastewater treatment, and it is becoming more and more urgent to realize efficient sludge reduction. Discharge plasma oxidation was used to efficiently disintegrate excess sludge for sludge reduction in this study. Approximately 18.22% sludge disintegration and 27.8% reduction of total suspended solids (TSS) were achieved by discharge plasma treatment. The water content of the filter cake decreased from 81.9% to 76.0% and the bound water content decreased from 2.66 g/g dry solid to 0.73 g/g dry solid after treatment. The large quantities of reactive oxygen species (ROS) generated by discharge plasma played important roles in sludge disintegration by destroying flocs and promoting the transformation of organic substances. Concurrent cell lysis induced by ROS oxidation released intracellular organics and water into the liquid phase. The fraction of soluble extracellular polymer substances (S-EPS) was enhanced from 16.10% to 58.51%, whereas the tightly bound fraction was reduced from 70.62% to 28.91%. Migration and decomposition of EPS were the main processes for EPS changing at a low oxidation capacity, whereas cell lysis became important at a high oxidation capacity. In summary, the plasma treatment effectively improved sludge disintegration.

Effects of polystyrene nanoplastics on extracellular polymeric substance composition of activated sludge: The role of surface functional groups

Here we investigated the acute effects (12 h exposure) of three polystyrene nanoplastics (PS NPs, including PS, PS-COOH and PS-NH₂) on extracellular polymeric substance (EPS) composition of activated sludge. Three PS NPs exhibited the significant inhibition in total EPS and protein (PRO) production. The functional groups involved in the interactions between PS NPs and EPS were C-(C, H), and those between PS-NH₂ NPs and EPS were CO and O-C-O. In addition, the dewaterability of activated sludge were optimized by three PS NPs, especially PS-NH₂ NPs. Three PS NPs caused nonnegligible cellular oxidative stress and cell membrane damage in activated sludge (PS NPs exposure concentration: 100 mg/L). Among them, the cell membrane damage caused by PS-NH₂ was the most significant. Overall, the degree of influence on EPS and cytotoxicity of activated sludge varies with the surface functional groups of PS NPs.

Peroxide/Zero-valent iron (Fe0) pretreatment for promoting dewaterability of anaerobically digested sludge: A mechanistic study

Peroxide/Zero-valent iron (Fe⁰) was reported to promote dewaterability of anaerobically digested sludge (ADS), but the mechanism of how Peroxide/Fe⁰ facilitates ADS dewatering is unknown. This study therefore aims to uncover the details of how Peroxide/Fe° elevates ADS dewaterability. Experimental results showed that with 0.6 g Fe⁰/g TSS and 0.08 g peroxide/g TSS, capillary suction time, specific resistance to filtration, and time to filtration of ADS was 50.7 %, 41.4 %, and 54.4 % of that in the control, respectively. In this condition, water content of sludge cake decreased from 91.2 % ± 0.5 % (the control) to 68.6 % ± 1.3 %. The mechanism explorations revealed that the elevated dewaterability was mainly caused by role of OH and Fe(II)/Fe(III) species during Peroxide/Fe° pretreatment. OH decreased the polysaccharides and proteins in extracellular polymeric substance (EPS), then injured the cytoderm & cytomembrane through the releases of lactate dehydrogenase and N-acetylglucosamine, and further facilitated the decrease of intracellular substances, which disengaged the water trapped in ADS. In addition, the cell lysis caused by OH facilitated forming macro-pores. Moreover, OH converted the conformational structure of extracellular proteins, which may strengthen the ADS hydrophobicity, promoting the discharge of unbound water and ADS flocculation. Meanwhile, Fe(II)/Fe(III) benefited aggregating the denatured ADS particulates.

Effects of aging and transformation of anatase and rutile TiO2 nanoparticles on biological phosphorus removal in sequencing batch reactors and related toxic mechanisms

The effect of nanomaterials aging, namely the transformation of comprehensive characteristics after experiencing real or complex environmental behaviors, on their ecotoxicology is still lacking. Moreover, the mechanisms by which NPs influence biological phosphorus (P) removal during sewage treatment require further elucidation. Therefore, we used both pristine and aged anatase (TiO₂-A) and rutile (TiO₂-R) NPs to investigate the mechanisms by which NPs affect P removal in a SBR. At 0.1 mg/L, the four types of NPs (pristine and aged) had no significant effect on sludge purification after acute (72-h) exposure under simulated sunlight. However, at 50 mg/L-regardless of the crystalline phase of the NPs-SOP and COD removal efficiency dropped steeply to approximately 42.2-82.4 % (p < 0.05) and 69.8-83.3 % (p < 0.05), respectively, especially in the pristine TiO₂-NPs groups because of decrease of richness and diversity of genus level of PAOs and enzyme activity of both PPK and PPX, and the sluggish transformation of PHA and glycogen. Aging reduced the ability of NPs toxicity. The toxicity mechanisms of TiO₂-NPs included lipid peroxidation and contact damage, or leakage from bacterial cytoplasmic membrane, which are closely related to photooxidation capacity and aqueous solution stability-i.e., nanoscale effects-and the impacts of aging or inclusion.

Deciphering pollutants removal mechanisms and genetic responses to ampicillin stress in simultaneous heterotrophic nitrification and aerobic denitrification (SHNAD) process treating seawater-based wastewater

Pollutants removal and genetic responses of simultaneous heterotrophic nitrification and aerobic denitrification (SHNAD) treating seawater-based wastewater were studied under ampicillin stress. Marine SHAND bacteria exhibited good tolerance to 10 mg/L ampicillin with nitrogen removal efficiency and organics removal efficiency of 94.5% and 82.6%, respectively. Besides, the half-inhibitory concentration of ampicillin on marine SHAND bacteria was 50 mg/L. The relative abundances of antibiotic resistance genes (ARGs) first decreased and then increased with ampicillin addition. The blaVIM played an important role to resist 25 mg/L ampicillin, which contributed to the recovery of pollutants removal. BlaSHV and blaTEM dominated ARG subtypes, which accounted for 96.6% of ARGs abundance. At 50 mg/L ampicillin, reactive oxygen species (ROS) production and cell numbers of apoptosis increased by 47.9% and 367.5%, respectively. The overproduction of ROS was stimulated by ampicillin, which caused bacterial cell apoptosis. Marine SHNAD bacteria produced more extracellular polymeric substances to resist ampicillin.

Responses of freshwater biofilm formation processes (from colonization to maturity) to anatase and rutile TiO2 nanoparticles: Effects of nanoparticles aging and transformation

Most of the current studies on the toxicology of pristine nanoparticles (NPs) are environmentally irrelevant, because their ''aging'' process accompanied by the physicochemical transformation is inevitable in the environment. Considering aging phenomenon will gain a better understanding of the toxicity and fate of NPs in the environment. Here, we focused on the physicochemical transformation of anatase-NPs (TiO₂-A) and rutile-NPs (TiO₂-R) after 90 days of aging and investigated the responses of freshwater biofilm formation to the stress changes of naturally aged TiO₂-NPs (aTiO₂-NPs). We found that after aging, the TiO₂-NPs underwent sophisticated physicochemical transformations in the original morphology and microstructure owing to organic and crystal salts inclusions, such as energy band changes and the formation of Ti³⁺ on the NPs surfaces. These comprehensive transformations increased the stability of NPs in the exposed suspension. However, the physicochemical transformations were crystal-forms-dependent, and aging did not change the crystal structure and crystallinity. Interestingly, compared to pristine NPs, aTiO₂-NPs showed much lower cytotoxicity and had the weaker ability to promote or inhibit the biofilm formation (p < 0.05) owing to the passivation of photoactivity caused by the comprehensive effect of the inclusions, especially for aTiO₂-A. Regardless of aging or not of crystal forms, responses of biofilm formation were exposure-concentration-dependent, namely low concentration promotion (0.1 mg/L) and high concentration inhibition (10 mg/L), e.g., role transition of the pioneers (algae or bacteria) in initial colonization, extracellular polymeric substances (EPS) secretion and compositions of development stages with polysaccharide (PS)-rich and protein (PRO)-rich stages, and biomass and cell activity at different depths of mature biofilms. The reactive oxygen species (ROS) induced by TiO₂-NPs showed typical hormesis. The changing trends of the autoinducers (c-di-GMP and quorum sensing signals including AHL and AI-2) were highly consistent with the growth stages of biofilms and were stimulated or suppressed by TiO₂-NPs. The NPs crystal-dependently changed the microorganism community structures, while the UPGMA clustering of bacteria was based on the growth stages of the biofilms. The toxic mechanisms revealed that photoactivity and nanoscale retention of particles are the main reasons for the differences in the ecological stress capacity of four kinds of TiO₂-NPs. Aging reduced characteristic differences of two pristine NPs and even reversed their relative stresses levels (p > 0.05). However, the toxicity of high-concentration aTiO₂-NPs (10 mg/L) remained serious in a water environment. This study provides a better understanding for the water environmental risks evaluation and policy control of nanoparticles, that is, the effect of time aging has to be considered.

Attachment Efficiency of Nanomaterials to Algae as an Important Criterion for Ecotoxicity and Grouping

Engineered nanomaterials (ENMs) based on CeO₂ and TiO₂ differ in their effects on the unicellular green alga Raphidocelis subcapitata but these effects do not reflect the physicochemical parameters that characterize such materials in water and other test media. To determine whether interactions with algae can predict the ecotoxicity of ENMs, we studied the attachment of model compounds (three subtypes of CeO₂ and five subtypes of TiO₂) to algal cells by light microscopy and electron microscopy. We correlated our observations with EC₅₀ values determined in growth inhibition assays carried out according to the Organisation for Economic Co-operation and Development (OECD) test guideline 201. Light microscopy revealed distinct patterns of ENM attachment to algal cells according to the type of compound, with stronger interactions leading to greater toxicity. This was confirmed by electron microscopy, which allowed the quantitative assessment of particle attachment. Our results indicate that algal extracellular polymeric substances play an important role in the attachment of ENMs, influencing the formation of agglomerates. The attachment parameters in short-term tests predicted the toxicity of CeO₂ and TiO₂ ENMs and can be considered as a valuable tool for the identification of sets of similar nanoforms as requested by the European Chemicals Agency in the context of grouping and read-across.

Fe(II) catalyzing sodium percarbonate facilitates the dewaterability of waste activated sludge: Performance, mechanism, and implication

In this work, Fe(II) catalyzing sodium percarbonate (Fe(II)/SPC) was managed to facilitate waste activated sludge (WAS) dewatering for the first time. The results showed that after WAS was treated by 20 mg/g total suspended solids (TSS) Fe(II) and 50 mg/g TSS SPC, the water content of sludge cake (WC_SC) by press filtration and capillary suction time (CST) dropped from 90.8% ± 1.6% and 96.1 ± 4.0 s (the control) to 55.6% ± 1.4% and 30.1 ± 2.5 s, respectively. The mechanism investigations indicated that four intermediates or products (i.e., •OH, H₂O₂, Fe(II), and Fe(III)) generated in the Fe(II)/SPC process were responsible for the improved WAS dewaterability, and •OH and Fe(III) were the two major contributors. It was found that •OH collapsed and fragmented extracellular polymeric substances, damaged cell wall and permeabilized cytoplasmic membrane, and transformed conformation of the extracellular proteins secondary structure via both affecting the hydrogen bond maintaining α-helix and cracking disulfide bond in cysteine residues while Fe(III), the oxidization product of Fe(II), decreased the surface electronegativity and water-affinity surface areas of WAS flocs. As a result, the bound water release, flocculability, surface hydrophobicity, drain capability, and flowability of WAS flocs were strengthened whereas the compact surface structure, colloidal forces, network strength, gel-like structure, and apparent viscosity of WAS flocs were weakened. In addition, Fe(II)/SPC process also reduced the recalcitrant organics and fecal coliforms in sludge, which facilitated land application of dewatered sludge. The findings acquired in this work not only deepens our understanding of Fe(II)/SPC-involved WAS treatment process but also may guide engineers to develop both effective and promising strategies to better condition WAS for dewatering in the future.