Per- and Polyfluoroalkyl Substances in Canadian Fast Food Packaging

Versatility of Caenorhabditis elegans as a Model Organism for Evaluating Foodborne Neurotoxins and Food Bioactive Compounds in Nutritional Neuroscience

Epidemiological evidence has shown that the regular ingestion of vegetables and fruits is associated with reduced risk of developing chronic diseases. The introduction of the 3Rs (replacement, reduction, and refinement) principle into animal experiments has led to the use of valid, cost-effective, and efficient alternative and complementary invertebrate animal models which are simpler and lower in the phylogenetic hierarchy. Caenorhabditis elegans (C. elegans), a nematode with a much simpler anatomy and physiology compared to mammals, share similarities with humans at the cellular and molecular levels, thus making it a valid model organism in neurotoxicology. This review explores the versatility of C. elegans in elucidating the neuroprotective mechanisms elicited by food bioactive compounds against neurotoxic effects of food- and environmental-related contaminants. Several signaling pathways linked to the molecular basis of neuroprotection exerted by bioactive compounds in chemically induced or transgenic C. elegans models of neurodegenerative diseases are also discussed. Specifically, the modulatory effects of bioactive compounds on the DAF-16/FoxO and SKN-1/Nrf2 signaling pathways, stress resistance- and autophagy-related genes, and antioxidant defense enzyme activities were highlighted. Altogether, C. elegans represent a valuable model in nutritional neuroscience for the identification of promising neuroprotective agents and neurotherapeutic targets which could help in overcoming the limitations of current therapeutic agents for neurotoxicity and neurodegenerative diseases.

Research on the PFAS release and migration behavior of multi-layer outdoor jacket fabrics

Perfluoroalkyl and poly-fluoroalkyl substances (PFAS) release from textiles is a source of human exposure, but the mechanisms behind this release remain insufficiently studied. This research investigates the release and transport mechanisms of PFAS in outdoor jacket fabrics treated with a short side-chain fluorinated polymers (C6F13-SFPs) for durable water repellency (DWR). PA-based and PET-based fabrics were exposed to outdoor conditions and subjected to accelerated aging, followed by abrasion, washing, and drying experiments to simulate wear and degradation. The fabrics were analyzed for total fluorine (TF) content, PFAS composition, and microplastic fibers (MFs) release. Photocatalytic oxidation was applied to fabric extracts to assess the transformation of PFAS precursors. The results show that aging causes a reduction in TF content and an increase in PFAS migration to inner fabric layers, particularly perfluoroalkyl acid (PFAA) and n:2 fluorotelomer alcohol (FTOH). Extended washing cycles further elevated fluorine release and MF shedding, with significant fluorine detected in the wash effluents and MFs. In summary, PFAS in outdoor jackets after use exceed regulatory limits and are hazardous to the environment. Therefore, setting limits for only a few PFAS is inadequate to assess release hazards. Future efforts should revise regulations based on release pathways, assess toxicity, and develop better prevention technologies.

DART isotope dilution high resolution mass spectrometry and 19F-NMR detection of fluorotelomeric alcohols in hydrolyzed food contact paper

Fluorotelomer-based acrylate polymers and surfactants used to grease-proof food contact paper (FCP) are potential sources of dietary exposure to perfluoroalkyl substances (PFAS). Food contact substances (FCS) containing polyfluorinated long-chains (≥C8) were voluntarily removed by their manufacturers from the U.S. market in 2011 due to health concerns and largely replaced with FCSs containing short-chain (≤C7) PFAS. In 2020, FDA findings of potential biopersistence of 6:2 FTOH (CF3(CF2)5CH2CH2OH) similarly prompted an additional voluntarily phase-out of FCSs containing 6:2 FTOH by their manufacturers that was completed by the end of 2023. To monitor the phase-out process, a screening method was developed to detect FCPs containing ester-linked polyfluorinated pendant chains. Direct Analysis in Real Time-Isotope Dilution-High Resolution Mass Spectrometry (DART-ID-HRMS) enabled rapid semi-quantitative detection of 6:2 FTOH in FCP saponification reaction headspace without requiring sample concentration or chromatography. 19F-NMR analysis confirmed 6:2 FTOH pendant chain identity and detection dependence on saponification. The speed and specificity of this approach arise from ester saponification in the presence of stable isotopically labeled 6:2 FTOH; high FTOH differential volatility relative to nonfluorinated matrix, and the facile production of FTOH gas-phase anions (e.g., [M + O2]·-, [M-H + CO2]-) under ambient ionization conditions. The efficiency of this simple workflow makes it well-suited for monitoring the phase-out of FCS containing ester-linked polyfluorinated chains from the U.S. marketplace.

Release of Volatile Per- and Polyfluoroalkyl Substances from Plant Fiber-Based Food Packaging and Municipal Solid Waste to Gas under Simulated Landfill Conditions

Per- and polyfluoroalkyl substances (PFAS) have been detected in plant fiber-based food packaging and most such packaging is disposed in landfills. The objective of this research was to evaluate the release of volatile PFAS to the gas-phase from PFAS-containing, single-use food packaging materials and from municipal solid waste (MSW) during anaerobic decomposition under simulated landfill conditions. After screening 46 materials for total F and 6:2 fluorotelomer alcohol (FTOH), packaging materials were classified as high or low F. High F materials included microwavable popcorn bags, natural plates, compostable bowls, biodegradable boxes, bagasse containers and eco-friendly plates, while the low F materials tested were paper plates, eco-friendly food trays and poly coated freezer paper. Summed PFAS release from the high F materials was 62-800 ng PFAS/g sample and 6:2 FTOH comprised 96.8-99.9% of the summed PFAS. The low F materials and MSW released 0.1-0.4 ng summed PFAS/g sample and 7:2-secondary (s) FTOH was the dominant volatile PFAS. PFAS were generally released early in the 123-285-day decomposition cycle, suggesting that some PFAS will be released prior to the installation of landfill gas collection systems. Nonetheless, PFAS have been reported in collected landfill gas, indicating that release occurs over many years.

Post-ICP Chemical Ionization MS for Total Extractable Organic Fluorine Quantitation

Total extractable organic fluorine (EOF) quantitation complements targeted analyses to ensure complete accounting of all fluorochemicals in a sample. Notably, the prevalence of perfluoroalkyl substances has increased the need for total EOF quantitation due to the myriad forms of these chemicals and the limited availability of standards for targeted analysis. Here, we evaluate postplasma chemical ionization mass spectrometry (MS), an approach developed to address the limitations of inductively coupled plasma (ICP)-MS in F analysis, for total EOF quantitation. Organofluorine-containing samples are introduced into an ICP, leading to the post-ICP formation of HF, which is then ionized to ScFNO3(H2O) n + and detected by quadrupole MS. We report optimal F detection across a wide range of ICP operating parameters, highlighting robust ion generation processes. We then compare sample introduction methods and show that a single-pass spray chamber mitigates volatility-related biases, yielding compound-independent F response factors and an instrumental detection limit of 2.2 ng of F mL-1 by using flow injections. This detection limit is 10-fold better than that offered by ICP-MS and comparable to that of combustion ion chromatography. Subsequently, we conduct total EOF quantitation of food contact paper products via methanolic extraction of 3 cm × 3 cm samples followed by 8-fold preconcentration with solid phase extraction and flow injections, achieving a detection limit of 1.2 ng F cm-2. We show that organic fluorine is detected on all 9 locally collected food contact paper products with total EOF contents of 22-363 ng F cm-2. These studies expand elemental MS capabilities in F analysis and highlight post-ICP chemical ionization MS as a facile total EOF quantitation technique.

The unique distribution pattern of PFAS in landfill organics

PFAS from degrading landfill waste partition into organic matter, leachate, and landfill gas. Driven by the limited understanding of PFAS distribution in landfill organics, we analyzed PFAS across various depths and seven spatially distinct locations within a municipal landfill. The measured PFAS concentrations in organics ranged from 6.71 to 73.06 µg kg-1, a sum of twenty-nine PFAS from six classes. Perfluorocarboxylic acids (PFCAs) and fluorotelomer carboxylic acids (FTCAs) were the dominant classes, constituting 25-82 % and 8-40 % of total PFAS at different depths. PFBA was the most dominant PFCA with a concentration range of 0.90-37.91 µg kg-1, while 5:3 FTCA was the most prevalent FTCA with a concentration of 0.26-17.99 µg kg-1. A clear vertical distribution of PFAS was observed, with significantly greater PFAS concentrations at the middle depths (20-35 ft), compared to the shallow (10-20 ft) and high depths (35-50 ft). A strong positive correlation (r > 0.50) was noted between total PFAS, total carbon, and dissolved organic matter in landfill organics. Multivariate statistical analysis inferred common sources and transformations of PFAS within the landfill. This study underscores the importance of a system-level analysis of PFAS fate in landfills, considering waste variability, chemical properties, release mechanisms, and PFAS transformations.

Leaching of per- and polyfluoroalkyl substances (PFAS) from food contact materials with implications for waste disposal

Leaching of per- and polyfluoroalkyl substances (PFAS) during the post-consumer disposal of food contact materials (FCMs) poses a potential environmental threat but has seldom been evaluated. This study characterized the leaching behavior of PFAS and unidentified precursors from six common FCMs and assessed the impact of environmental conditions on PFAS release during disposal. The total concentration of 21 PFAS ranged from 3.2 to 377 ng/g in FCMs, with PFAS leachability into water varying between 1.1-42.8 %. Increasing temperature promoted PFAS leaching, with leached nine primary PFAS (∑9PFAS) reaching 46.3, 70.4, and 102 ng/L at 35, 45, and 55 ℃, respectively. Thermodynamic analysis (∆G>0, ∆H>0, and ∆S<0) indicated hydrophobic interactions control PFAS leaching. The presence of dissolved organic matter in synthetic leachate increased the leached ∑9PFAS from 47.1 to 103 ng/L but decreased PFBS, PFOS, and 6:2 FTS leaching. The total release of seven perfluorocarboxylic acids (∑7PFCAs) from takeaway food packaging waste was estimated to be 0.3-8.2 kg/y to landfill leachate and 0.6-15.4 kg/y to incineration plant leachate, contributing 0.2-4.8 % and 0.1-3.2 % of total ∑7PFCAs in each leachate type. While the study presents a refined methodology for estimating PFAS release during disposal, future research is needed on the indirect contribution from precursors.

Fluorinated compounds in paper and paperboard based food packaging materials

Paper- and paperboard-based materials are alternatives to petroleum-based plastics in food packaging but unsuitable for their poor moisture and oil resistance. In this sense, fluorinated compounds improve water and grease repellency, though their use is controversial. This Perspective discusses main techniques to combine fluorinated compounds with paper and paperboard, including water and oil contact angles and grease resistance values, and summarizes main legal aspects in Europe and the United States.

Aggregated health risk assessment of perfluoroalkyl acids migrated from convenience food contact materials

Ingestion of perfluoroalkyl acids (PFAAs) via contaminated food contact materials (FCMs) is an important human exposure source. This study adopts a toxicity equivalent approach to evaluate the collective health risk of multiple PFAAs in FCMs. A comprehensive extraction and analysis of 21 PFAAs in FCMs was performed. Among the analyzed substances, 15 PFAAs were detected. Migration experiment using three food simulants revealed the migration range of seven PFAAs from FCMs into the simulant to be 0.47-46.7 ng/cm2. The hazard quotient results suggest minimal health risk, except for 9% of packaged samples where perfluorooctanoic acid (PFOA) poses a higher risk. Utilizing PFOA toxic equivalent concentrations, comprehensive risk calculations showed ∼77% of samples potentially posing elevated health risks due to PFAA exposure. This emphasizes the substantial contribution of PFAAs beyond PFOA and underscores the importance of considering them in related assessments. The aggregated risk assessment reflects actual exposure circumstances more accurately.

Polyfluoroalkyl-Substances Detection in Junk Food Packing Materials Using Various Analytical Methods: A Review

Per- and polyfluoroalkyl substances (PFAS) are unseen, dangerous organic compounds that can cause major health disorders. PFASs have been categorized as persistent, bioaccumulative, and toxic (PBT). This review provides knowledge about the PFASs present in junk food packaging materials, which can migrate into the food. Different types of samples were analyzed using the analytical methods. The most preferred method of extraction is ultrasonic-assisted extraction (UAE). It summarizes the analytical approaches of PFASs. The results of numerous studies show that perfluorooctanoic acid is the most often detected compound with high concentrations. The European Food Safety Authority (EFSA) announced that the tolerable weekly intake (TWI) of PFASs is 4.4 ng/kg. The US Environmental Protection Agency (EPA) has announced the limit for perfluorobutane sulfonic acid due to its toxicity level. These compounds have potential effects on both people's health and the biosphere. PFAS usage has to stop in the industries for a better future.

A decade of data and hundreds of analytes: Legacy and emerging chemicals in North American herring gull plasma

Between 2010 and 2021, 199 herring gull serum samples were collected from Lake Michigan, Lake Huron, and Lake Erie, including two Areas of Concern: Saginaw Bay and the River Raisin. They were analyzed for 21 polybrominated diphenyl ether congeners, 10 non-PBDE flame retardants, 85 polychlorinated biphenyls, 17 legacy organochlorine pesticides, and 36 per- and polyfluoroalkyl substances. Σ36PFAS, Σ85PCB, Σ21PBDE, and Σ17Pesticide concentrations comprised 41-74%, 17-50%, 3-4%, and 5-9% of the total concentration, respectively. Median concentrations of the chemical groups ranged from 81.5 to 129 ng/g ww for PFAS, 26.3-158 ng/g ww for PCBs, 4.26-8.89 ng/g ww for PBDEs, and 8.08-23.0 ng/g ww for pesticides. The regional concentrations of all four classes of compounds are significantly decreasing when sites are combined with halving times of 11.3 ± 4.8, 8.2 ± 4.3, 5.9 ± 3.1, and 8.3 ± 4.2 years for the Penta-BDE mixture, ΣDDTs, Σ85PCBs and Σ36PFAS, respectively. These results suggest that, while PFAS has emerged as the dominant group of chemicals in the plasma, legacy pollutants continue to represent a threat to herring gulls and wildlife in the Great Lakes basin. PCBs were the largest contributors to the chemical load in plasma of birds whose colonies are located near the River Raisin, and continue to pose a threat to herring gulls within the two Areas of Concern.

Zürich II Statement on Per- and Polyfluoroalkyl Substances (PFASs): Scientific and Regulatory Needs

Per- and polyfluoroalkyl substances (PFASs) are a class of synthetic organic chemicals of global concern. A group of 36 scientists and regulators from 18 countries held a hybrid workshop in 2022 in Zürich, Switzerland. The workshop, a sequel to a previous Zürich workshop held in 2017, deliberated on progress in the last five years and discussed further needs for cooperative scientific research and regulatory action on PFASs. This review reflects discussion and insights gained during and after this workshop and summarizes key signs of progress in science and policy, ongoing critical issues to be addressed, and possible ways forward. Some key take home messages include: 1) understanding of human health effects continues to develop dramatically, 2) regulatory guidelines continue to drop, 3) better understanding of emissions and contamination levels is needed in more parts of the world, 4) analytical methods, while improving, still only cover around 50 PFASs, and 5) discussions of how to group PFASs for regulation (including subgroupings) have gathered momentum with several jurisdictions proposing restricting a large proportion of PFAS uses. It was concluded that more multi-group exchanges are needed in the future and that there should be a greater diversity of participants at future workshops.

Why are nH-perfluoroalkanoate ions more mobile than expected? Implications for identifying an emerging environmental pollutant

nH-Perfluoroalkyl carboxylic acids (nH-PFCAs) are emerging pollutants. Their identification by ion mobility is frustrated by the nH-PFCAs having unexpectedly small collision cross sections (CCS). Theory and experiment agree that this is because nH-PFCA ions undergo internal hydrogen bridging, and this insight will help guide the creation of more accurate methods for pollutant identification.

Non-targeted analysis of per- and polyfluorinated substances in consumer food packaging

This study sought to develop a non-targeted workflow using high-resolution mass spectrometry (HRMS) to investigate previously unknown PFAS in consumer food packaging samples. Samples composed of various materials for different food types were subjected to methanolic extraction, controlled migration with food simulants and total oxidizable precursor (TOP) assay. The developed HRMS workflow utilized many signatures unique to PFAS compounds: negative mass defect, diagnostic breakdown structures, as well as retention time prediction. Potential PFAS features were identified in all packaging studied, regardless of food and material types. Five tentatively identified compounds were confirmed with analytical standards: 6:2 fluorotelomer phosphate diester (6:2 diPAP) and one of its intermediate breakdown products 2H-perfluoro-2-octenoic acid (6:2 FTUCA), perfluoropentadecanoic acid (PFPeDA), perfluorohexadecanoic acid (PFHxDA) and perfluorooctadecanoic acid (PFOcDA). Longer perfluorocarboxylic acids including C17 and C19 to C24 were also found present within a foil sample. Concentrations of 6:2 FTUCA ranged from 0.78 to 127 ng g-1 in methanolic extracts and up to 6 ng g-1 in food simulant after 240 h migration test. These results demonstrate the prevalence of both emerging and legacy PFAS in food packaging samples and highlight the usefulness of non-targeted tools to identify PFAS not included in targeted methods.

Identification and quantification of per- and polyfluorinated alkyl substances (PFAS) migrating from food contact materials (FCM)

Per- and polyfluorinated alkyl substances (PFAS) can be added to food contact materials (FCM) to increase their water and/or grease repellent properties. Some well-known PFAS are perfluoroalkyl carboxylic acids (PFCA), perfluoroalkyl sulfonic acids (PFSA), and polyfluorinated telomer alcohols (FTOH). Due to the strength of the carbon-fluorine bond, PFAS are chemically very stable and highly resistant to biological degradation, posing a risk to human health and the environment. To examine the presence of PFAS in paper-based FCM, various samples were collected, including popcorn bags, muffin cups, and pizza boxes with high total organic fluorine (TOF) content from the Danish and Spanish markets. The FCM composition was characterised by FTIR. Quantification of some well-known PFAS such as PFCA, PFSA, and FTOH was performed in food simulants using LC-MS/MS, and in addition a non-targeted screening approach was performed by LC-Orbitrap-HRMS. Among analysed samples, the highest concentrations of PFAS were found in a muffin cup made of cellulose (PFCA ∼ 1.41 μg kg-1 food, FTOH ∼ 11.5 μg kg-1 food), and the results were used to estimate dietary exposures to PFAS migrated from this FCM. Compared to measured TOF value in this sample, the fluorine from all quantified PFAS accounted for only 0.6%. Thus, a more powerful analytical approach was used to further investigate PFAS occurrence in this sample. Using non-targeted screening, an additional twenty compounds were identified, among them five with confidence level 1 and ten with confidence level 2. Many of them were either fluorotelomer carboxylic acids or sulfonic acids or ether-containing compounds.

PFAS in Nigeria: Identifying data gaps that hinder assessments of ecotoxicological and human health impacts

This review examines the extensive use and environmental consequences of Per- and Polyfluoroalkyl Substances (PFAS) on a global scale, specifically emphasizing their potential impact in Nigeria. Recognized for their resistance to water and oil, PFAS are under increased scrutiny for their persistent nature and possible ecotoxicological risks. Here, we consolidate existing knowledge on the ecological and human health effects of PFAS in Nigeria, focusing on their neurological effects and the risks they pose to immune system health. We seek to balance the advantages of PFAS with their potential ecological and health hazards, thereby enhancing understanding of PFAS management in Nigeria and advocating for more effective policy interventions and the creation of safer alternatives. The review concludes with several recommendations: strengthening regulatory frameworks, intensifying research into the ecological and health impacts of PFAS, developing new methodologies and longitudinal studies, fostering collaborative efforts for PFAS management, and promoting public awareness and education to support sustainable environmental practices and healthier communities in Nigeria.

Investigating the sources and fate of per- and polyfluoroalkyl substances (PFAS) in food waste compost

Composting municipal food waste is a key strategy for beneficially reusing methane-producing waste that would otherwise occupy landfill space. However, land-applied compost can cycle per- and polyfluoroalkyl substances (PFAS) back into the food supply and the environment. We partnered with a pilot-scale windrow composting facility to investigate the sources and fate of 40 PFAS in food waste compost. A comparison of feedstock materials yielded concentrations of ∑PFAS under 1 ng g-1 in mulch and food waste and at 1380 ng g-1 in leachate from used compostable food contact materials. Concentrations of targeted ∑PFAS increased with compost maturity along the windrow (1.85-23.1 ng g-1) and in mature stockpiles of increasing curing age (12.6-84.3 ng g-1). Among 15 PFAS quantified in compost, short-chain perfluorocarboxylic acids (PFCAs) - C5 and C6 PFCAs in particular - led the increasing trend, suggesting biotransformation of precursor PFAS into these terminal PFAS through aerobic decomposition. Several precursor PFAS were also measured, including fluorotelomer carboxylic acids (FTCAs) and polyfluorinated phosphate diesters (PAPs). However, since most targeted analytical methods and proposed regulations prioritize terminal PFAS, testing fully matured compost would provide the most relevant snapshot of PFAS that could be land applied. In addition, removing co-disposed food contact materials from the FW feedstock onsite yielded only a 37 % reduction of PFAS loads in subsequent compost, likely due to PFAS leaching during co-disposal. Source-separation of food contact materials is currently the best management practice for meaningful reduction of PFAS in food waste composts intended for land application.

Bioaccumulation of Perfluoroalkyl Sulfonamides (FASA)

Hundreds of sites across the United States have high concentrations of perfluoroalkyl sulfonamides (FASA), but little is known about their propensity to accumulate in fish. FASA are precursors to terminal per- and polyfluoroalkyl substances (PFAS) that are abundant in diverse consumer products and aqueous film-forming foams manufactured using electrochemical fluorination (ECF AFFF). In this study, FASA with C3-C8 carbon chain lengths were detected in all fish samples from surface waters up to 8 km downstream of source zones with ECF AFFF contamination. Short-chain FASA ≤ C6 have rarely been included in routine screening for PFAS, but availability of new standards makes such analyses more feasible. Bioaccumulation factors (BAF) for FASA were between 1 and 3 orders of magnitude greater than their terminal perfluoroalkyl sulfonates. Across fish species, BAF for FASA were greater than for perfluorooctanesulfonate (PFOS), which is presently the focus of national advisory programs. Similar concentrations of the C6 FASA (<0.36-175 ng g-1) and PFOS (0.65-222 ng g-1) were detected in all fish species. No safety thresholds have been established for FASA. However, high concentrations in fish next to contaminated sites and preliminary findings on toxicity suggest an urgent need for consideration by fish advisory programs.

Per- and Polyfluoroalkyl Substances in Food Packaging: Migration, Toxicity, and Management Strategies

PFASs are linked to serious health and environmental concerns. Among their widespread applications, PFASs are known to be used in food packaging and directly contribute to human exposure. However, information about PFASs in food packaging is scattered. Therefore, we systematically map the evidence on PFASs detected in migrates and extracts of food contact materials and provide an overview of available hazard and biomonitoring data. Based on the FCCmigex database, 68 PFASs have been identified in various food contact materials, including paper, plastic, and coated metal, by targeted and untargeted analyses. 87% of these PFASs belong to the perfluorocarboxylic acids and fluorotelomer-based compounds. Trends in chain length demonstrate that long-chain perfluoroalkyl acids continue to be found, despite years of global efforts to reduce the use of these substances. We utilized ToxPi to illustrate that hazard data are available for only 57% of the PFASs that have been detected in food packaging. For those PFASs for which toxicity testing has been performed, many adverse outcomes have been reported. The data and knowledge gaps presented here support international proposals to restrict PFASs as a group, including their use in food contact materials, to protect human and environmental health.

Determination of per- and polyfluoroalkyl compounds in paper recycling grades using ultra-high-performance liquid chromatography-high-resolution mass spectrometry

Globally, per- and polyfluoroalkyl substances (PFAS)-related research on paper products has focused on food packaging with less consideration on the presence of PFAS at different stages of the paper recycling chain. This study analysed the prevalence of PFAS in paper grades used for the manufacture of recycled paperboard. The presence of PFAS was attributed to the use of PFAS-containing additives, consumer usage, exposure to packed goods as well as contamination during mingling, sorting, collection, and recovery of paper recycling material. Q Orbitrap mass spectrometry was used to analyse the paper samples after accelerated solvent extraction and solid phase extraction. The distribution and possible propagation of 22 PFAS were determined in pre-consumer, retail and post-consumer paper products. Post-consumer samples had the highest combined average concentration (ΣPFAS) at 213 ng/g, while the ΣPFAS in retail (159 ng/g) and pre-consumer samples (121 ng/g) was detected at lower concentrations. This study showed that waste collection and recycling protocols may influence PFAS propagation and that measures must be developed to minimise and possibly eliminate exposure opportunities.

Unveiling per- and polyfluoroalkyl substance contamination in Chinese paper products and assessing their exposure risk

The contamination characteristics, migration patterns and health risks of per- and polyfluoroalkyl substances (PFAS) were investigated in 66 Chinese paper products by using target and non-target screening methods. Among 57 target PFASs, 5 and 6 PFASs were found in the hygiene paper products ( Collapse

Key Words

• Migration
• Non-target analysis
• Paper products
• Per- and polyfluoroalkyl substances
• Risk assessment

Collapse

MESH Headings

• Humans
• Fluorocarbons/analysis
• Ethanol
• Food
• Food Safety
• China
• Alkanesulfonic Acids/analysis

Collapse

Grants Collapse

Affiliation(s)

Yan-Fei Chen SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Ting Liu SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Li-Xin Hu SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Chang-Er Chen SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Bin Yang SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China.
Guang-Guo Ying SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China

Collapse

Investigation of pH-dependent extraction methods for PFAS in (fluoropolymer-based) consumer products: A comparative study between targeted and sum parameter analysis

Here, we report a comparative study of different sum parameter analysis methods for the extraction of per- and polyfluoroalkyl substances (PFAS) from manufactured consumer products, which can be measured by combustion ion chromatography (CIC). Therefore, a hydrolysis-based extraction method was further developed, which accounts for the addition of hydrolyzable covalently bound polyfluoroalkylated side-chain polymers (SFPs) to the extractable organic fluorine portion of the mass balance proposed as "hydrolyzable organically bound fluorine" (HOF). To test this hypothesis, the method was applied to 39 different consumer products containing fluoropolymers or monomeric PFAS taken from four different categories: outdoor textiles, paper packaging, carpeting, and permanent baking sheets. We also evaluated the method's efficiency by extracting four synthesized fluorotelomer polyacrylate reference compounds. The total fluorine (TF) and extractable organically bound fluorine (EOF) values were measured through CIC using established protocols. The TF values ranged from sub-ppb to %-levels, depending on the compound class. All samples showed results for hydrolyzed organofluorine (HOF) between 0.03 and 76.3 μg/g, while most EOF values were lower ( Collapse

Key Words

• Combustion ion chromatography (CIC)
• Extractable organically bound fluorine (EOF)
• Hydrolytic extraction
• Per- and polyfluoroalkyl substances (PFAS) sum parameter
• Side-chain fluorinated polymers (SFPs)
• Solid-liquid extraction

Collapse

MESH Headings

• Fluorocarbon Polymers/analysis
• Fluorocarbons/analysis
• Chromatography, Liquid
• Fluorine/chemistry
• Tandem Mass Spectrometry
• Hydrogen-Ion Concentration

Collapse

Grants Collapse

Affiliation(s)

Philipp Roesch Federal Institute for Materials Research and Testing, Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany.
Andrea Schinnen Federal Institute for Materials Research and Testing, Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany
Maren Riedel Federal Institute for Materials Research and Testing, Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany
Thomas Sommerfeld Federal Institute for Materials Research and Testing, Division 1.7 - Organic Trace and Food Analysis, Richard-Willstätter-Straße 11, 12489, Berlin, Germany
George Sawal German Environment Agency, Colditzstr. 34, 12099, Berlin, Germany
Nicole Bandow German Environment Agency, Colditzstr. 34, 12099, Berlin, Germany
Christian Vogel Federal Institute for Materials Research and Testing, Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany
Ute Kalbe Federal Institute for Materials Research and Testing, Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany
Franz-Georg Simon Federal Institute for Materials Research and Testing, Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany

Collapse

Per- and polyfluoroalkyl substances (PFAS) in Canadian municipal wastewater and biosolids: Recent patterns and time trends 2009 to 2021

The concentrations of per- and polyfluoroalkyl substances (PFAS) were determined in raw influent, final effluent, and treated biosolids at Canadian wastewater treatment plants (WWTPs) to evaluate the fate of PFAS through liquid and solids trains of typical treatment process types used in Canada and to assess time trends of PFAS in wastewater between 2009 and 2021. Data for 42 PFAS in samples collected from 27 WWTP across Canada were used to assess current concentrations and 48 WWTPs were included in the time trends analysis. Although regulated and phased-out of production by industry since the early 2000s and late 2000s/early2010s, respectively, perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and other long-chain PFAS continue to be widely detected in Canadian wastewater and biosolids. Short-chain PFAS that are not currently regulated in Canada were also widely detected. In general, elevated concentrations of several PFAS were observed at WWTPs that receive landfill leachate. Except for PFOS, concentrations of long-chain perfluoroalkyl carboxylates (PFCAs) and perfluoroalkane sulfonates (PFSAs) generally decreased over time in influent, effluent, and biosolids, which is attributable to industrial production phase-outs and regulations. Concentrations of PFOS did not decrease over time in wastewater media. This indicates that regulatory action and industrial phase-outs of PFOS are slow to be reflected in wastewater. Concentrations of short-chain PFCAs in wastewater influent and effluent consistently increased between 2009 and 2021, which reflect the use of short-chain PFAS as replacements for phased-out and regulated longer-chained PFAS. Short-chain PFAS were infrequently detected in biosolids. Continued periodic monitoring of PFAS in wastewater matrices in Canada and throughout the world is recommended to track the effectiveness of regulatory actions, particularly activities to address the broad class of PFAS.

Polyfluoroalkyl phosphate esters (PAPs) as PFAS substitutes and precursors: An overview

Polyfluoroalkyl phosphate esters (PAPs) are emerging substitutes for legacy per- and polyfluoroalkyl substances (PFAS), which are widely applied in consumer products and closely related to people's daily lives. Increasing concern has been raised about the safety of PAPs due to their metabolism into perfluorooctanoic acid (PFOA) and other perfluorinated carboxylates (PFCAs) in vivo. This review summarizes the current knowledge on PAPs and highlights the knowledge gaps. PAPs dominated the PFAS profiles in wastewater, sludge, household dust, food-contact materials, paper products, paints, and cosmetics. They exhibit biomagnification due to their higher levels in top predators. PAPs have been detected in human blood worldwide, with the highest mean levels being found in the United States (1.9 ng/mL) and China (0.4 ng/mL). 6:2 diPAP is the predominant PAP among all identified matrices, followed by 8:2 diPAP. Toxicokinetic studies suggest that after entering the body, most PAPs undergo biotransformation, generating phase Ⅰ (i.e., PFCAs), phase II, and intermediate products with toxicity to be verified. Several epidemiological and toxicological studies have reported the antiandrogenic effect, estrogenic effect, thyroid disruption, oxidative damage, and reproductive toxicity of PAPs. More research is urgently needed on the source and fate of PAPs, human exposure pathways, toxicity other than reproductive and endocrine systems, toxic effects of metabolites, and mixed exposure effects.

Determining the Surface pKa of Perfluorooctanoic Acid

Perfluorooctanoic acid (PFOA) is an environmentally prevalent and persistent organic pollutant with toxic and bioaccumulative properties. Despite the known importance of perfluorinated pollutants in the global environment, molecular-level details of the physicochemical behavior of PFOA on aqueous interfaces remain poorly understood. Here, we utilized two surface-specific techniques, vibrational sum frequency generation spectroscopy (SFG) and surface tensiometry, to investigate the pH-induced structural changes of PFOA and octanoic acid (OA) and determined the apparent pKa at the air-water surface. The SFG spectra and surface activity model were investigated over a wide range of pHs. With the surface tension measurements, the surface pKa values for OA and PFOA are determined to be 3.8 ± 0.1 and 2.2 ± 0.2, respectively. These results could provide insights into improved remediation of PFOAs and may impact climate modeling of perfluorinated alkyl chain molecules.

Measurement of fluorotelomer alcohols based on solid phase microextraction followed by gas chromatography-mass spectrometry and its application in solid waste study

This work developed a method based on solid phase microextraction followed by gas chromatography/mass spectrometry (SPME-GC/MS) for the measurement of fluorotelomer alcohols (FTOHs) in gas samples. The method quantification limit (MQL) is 6-7 ng/L for 6:2 fluorotelomer alcohols (6:2 FTOH) and 8:2 fluorotelomer alcohols (8:2 FTOH). In contrast to common methods such as thermal desorption combined with GC-MS, it needs neither pre-concentration equipment nor large sample volume. The extraction-evaporation-GC/MS is commonly used in literature for FTOHs measurement in solids samples. We developed a method to measure FTOHs in solid samples by adding solvent extraction prior to headspace SPME-GC/MS. The extraction-headspace SPME-GC/MS method has a quantification limit of 40-43 ng per gram for 6:2 FTOH and 8:2 FTOH in solid samples. This is comparable to the MQLs for the extraction-evaporation-GC/MS method. Removing the solvent evaporation step decreased the risk of contamination and loss of analytes. The developed methods were successfully used in three examples of solid waste study: 1) measuring 6:2 FTOH and 8:2 FTOH above the MQL in gas emissions from a closed landfill, 2) finding 6:2 FTOH above MQL in 9 of 31 solid consumer products, and 3) finding that the release of 6:2 FTOH in simulated landfills containing popcorn bags was linear at a rate of 3.15 ng/g popcorn bags-day and that partial 6:2 FTOH was from the hydrolysis of precursors.

Recent Advances in Non-Targeted Screening of Compounds in Plastic-Based/Paper-Based Food Contact Materials

Ensuring the safety of food contact materials has become a pressing concern in recent times. However, detecting hazardous compounds in such materials can be a complex task, and traditional screening methods may not be sufficient. Non-targeted screening technologies can provide comprehensive information on all detectable compounds, thereby supporting the identification, detection, and risk assessment of food contact materials. Nonetheless, the non-targeted screening of food contact materials remains a challenging issue. This paper presents a detailed review of non-targeted screening technologies relying on high-resolution mass spectrometry for plastic-based and paper-based food contact materials over the past five years. Methods of extracting, separating, concentrating, and enriching compounds, as well as migration experiments related to non-targeted screening, are examined in detail. Furthermore, instruments and devices of high-resolution mass spectrometry used in non-targeted screening technologies for food contact materials are discussed and summarized. The research findings aim to provide a theoretical basis and practical reference for the risk management of food contact materials and the development of relevant regulations and standards.

Cloth-Air Partitioning of Neutral Per- and Polyfluoroalkyl Substances (PFAS) in North Carolina Homes during the Indoor PFAS Assessment (IPA) Campaign

Partitioning of per- and polyfluoroalkyl substances (PFAS) to indoor materials, including clothing, may prolong the residence time of PFAS indoors and contribute to exposure. During the Indoor PFAS Assessment (IPA) Campaign, we measured concentrations of nine neutral PFAS in air and cotton cloth in 11 homes in North Carolina, for up to 9 months. Fluorotelomer alcohols (i.e., 6:2 FTOH, 8:2 FTOH, and 10:2 FTOH) are the dominant target species in indoor air, with concentrations ranging from 1.8 to 49 ng m-3, 1.2 to 53 ng m-3, and 0.21 to 5.7 ng m-3, respectively. In cloth, perfluorooctane sulfonamidoethanols (i.e., MeFOSE and EtFOSE) accumulated most significantly over time, reaching concentrations of up to 0.26 ng cm-2 and 0.24 ng cm-2, respectively. From paired measurements of neutral PFAS in air and suspended cloth, we derived cloth-air partition coefficients (Kca) for 6:2, 8:2, and 10:2 FTOH; ethylperfluorooctane sulfonamide (EtFOSA); MeFOSE; and EtFOSE. Mean log(Kca) values range from 4.7 to 6.6 and are positively correlated with the octanol-air partition coefficient. We investigated the effect of the cloth storage method on PFAS accumulation and the influence of home characteristics on air concentrations. Temperature had the overall greatest effect. This study provides valuable insights into PFAS distribution, fate, and exposure indoors.

Perfluoroalkyl substances in food contact materials: preliminary investigation in Vietnam and global comparison

Per- and polyfluoroalkyl substances (PFASs) are a group of concerned persistent toxic substances, especially for their application or unintentional formation in food contact materials (FCMs). However, information about the occurrence, sources, and fate of these pollutants in food packaging materials from Vietnam as well as Southeast Asian countries is probably still obscured. In this study, levels of 13 perfluoroalkyl carboxylic acids (PFCAs) and 4 sulfonates (PFSs) were determined in various types of food packaging samples collected from Vietnamese markets. Generally low concentrations of total 17 PFASs (median 0.341; max 624 ng/g) suggested that these compounds were mainly inadvertently produced rather than intentionally added to the packaging materials. A few mochi paper tray samples had relatively high PFAS levels (372-624 ng/g), which were dominated by long-chain (C8-C12) PFCAs. A comprehensive and updated overview of PFASs in FCMs from different countries in the world was also provided. Current database could not provide conclusive trends of PFAS concentrations and profiles in FCMs between continents and countries. The highest levels up to ppm were reported for PFCAs (e.g., PFBA, PFHxA, PFOA, and PFDA) and several fluorotelomer alcohols and carboxylic acids, while PFSs were almost absent in FCMs. FPASs can emit from FCMs, migrate to food, and then contribute to dietary exposure in humans and animals. Additional investigations on the occurrence, sources, behavior and fate, and impacts of PFASs in FCMs are critically needed, especially in emerging and developing countries.

Current Review of Increasing Animal Health Threat of Per- and Polyfluoroalkyl Substances (PFAS): Harms, Limitations, and Alternatives to Manage Their Toxicity

Perfluorinated and polyfluorinated alkyl substances (PFAS), more than 4700 in number, are a group of widely used man-made chemicals that accumulate in living things and the environment over time. They are known as "forever chemicals" because they are extremely persistent in our environment and body. Because PFAS have been widely used for many decades, their presence is evident globally, and their persistence and potential toxicity create concern for animals, humans and environmental health. They can have multiple adverse health effects, such as liver damage, thyroid disease, obesity, fertility problems, and cancer. The most significant source of living exposure to PFAS is dietary intake (food and water), but given massive industrial and domestic use, these substances are now punctually present not only domestically but also in the outdoor environment. For example, livestock and wildlife can be exposed to PFAS through contaminated water, soil, substrate, air, or food. In this review, we have analyzed and exposed the characteristics of PFAS and their various uses and reported data on their presence in the environment, from industrialized to less populated areas. In several areas of the planet, even in areas far from large population centers, the presence of PFAS was confirmed, both in marine and terrestrial animals (organisms). Among the most common PFAS identified are undoubtedly perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA), two of the most widely used and, to date, among the most studied in terms of toxicokinetics and toxicodynamics. The objective of this review is to provide insights into the toxic potential of PFAS, their exposure, and related mechanisms.

Research Updates on the Mechanism and Influencing Factors of the Photocatalytic Degradation of Perfluorooctanoic Acid (PFOA) in Water Environments

Perfluorooctanoic acid is ubiquitous in water bodies and is detrimental to the health of organisms. Effectively removing perfluorooctanoic acid (PFOA), a persistent organic pollutant, has been a hot topic around the world. With traditional physical, chemical, and biological methods, it is difficult to effectively and completely remove PFOA, the costs are high, and it is easy to cause secondary pollution. There are difficulties in applying some technologies. Therefore, more efficient and green degradation technologies have been sought. Photochemical degradation has been shown to be a low-cost, efficient, and sustainable technique for PFOA removal from water. Photocatalytic degradation technology offers great potential and prospects for the efficient degradation of PFOA. Most studies on PFOA have been conducted under ideal laboratory conditions at concentrations that are higher than those detected in real wastewater. This paper summarizes the research status of the photo-oxidative degradation of PFOA, and it summarizes the mechanism and kinetics of PFOA degradation in different systems, as well as the influence of key factors on the photo-oxidative degradation and defluoridation process, such as system pH, photocatalyst concentration, etc. PFOA photodegradation technology's existing problems and future work directions are also presented. This review provides a useful reference for future research on PFOA pollution control technology.