Thermodynamic Study of the Interaction of Bovine Serum Albumin and Amino Acids with Cellulose Nanocrystals

Nanocellulose-short peptide self-assembly for improved mechanical strength and barrier performance

Cellulose nanofibers (CNF) are the most abundant renewable nanoscale fibers on Earth, and their use in the design of hybrid materials is ever more acclaimed, although it has been mostly limited, to date, to CNF derivatives obtained via covalent functionalization. Herein, we propose a noncovalent approach employing a set of short peptides - DFNKF, DF(I)NKF, and DF(F5)NKF - as supramolecular additives to engineer hybrid hydrogels and films based on unfunctionalized CNF. Even at minimal concentrations (from 0.1% to 0.01% w/w), these peptides demonstrate a remarkable ability to enhance CNF rheological properties, increasing both dynamic moduli by more than an order of magnitude. Upon vacuum filtration of the hydrogels, we obtained CNF-peptide films with tailored hydrophobicity and surface wettability, modulated according to the peptide content and halogen type. Notably, the presence of fluorine in the CNF-DF(F5)NKF film, despite being minimal, strongly enhances CNF water vapor barrier properties and reduces the film water uptake. Overall, this approach offers a modular, straightforward method to create fully bio-based CNF-peptide materials, where the inclusion of DFNKF derivatives allows for facile functionalization and material property modulation, opening their potential use in the design of packaging solutions and biomedical devices.

Nanocellulose-Bovine Serum Albumin Interactions in an Aqueous Medium: Investigations Using In Situ Nanocolloidal Probe Microscopy and Reactive Molecular Dynamics Simulations

As a versatile nanomaterial derived from renewable sources, nanocellulose has attracted considerable attention for its potential applications in various sectors, especially those focused on water treatment and remediation. Here, we have combined atomic force microscopy (AFM) and reactive molecular dynamics (RMD) simulations to characterize the interactions between cellulose nanofibers modified with carboxylate or phosphate groups and the protein foulant model bovine serum albumin (BSA) at pH 3.92, which is close to the isoelectric point of BSA. Colloidal probes were prepared by modification of the AFM probes with the nanofibers, and the nanofiber coating on the AFM tip was for the first time confirmed through fluorescence labeling and confocal optical sectioning. We have found that the wet-state normalized adhesion force is approximately 17.87 ± 8.58 pN/nm for the carboxylated cellulose nanofibers (TOCNF) and about 11.70 ± 2.97 pN/nm for the phosphorylated ones (PCNF) at the studied pH. Moreover, the adsorbed protein partially unfolded at the cellulose interface due to the secondary structure's loss of intramolecular hydrogen bonds. We demonstrate that nanocellulose colloidal probes can be used as a sensitive tool to reveal interactions with BSA at nano and molecular scales and under in situ conditions. RMD simulations helped to gain a molecular- and atomistic-level understanding of the differences between these findings. In the case of PCNF, partially solvated metal ions, preferentially bound to the phosphates, reduced the direct protein-cellulose connections. This understanding can lead to significant advancements in the development of cellulose-based antifouling surfaces and provide crucial insights for expanding the pH range of use and suggesting appropriate recalibrations.

Thermodynamics of interactions between cellulose nanocrystals and monovalent counterions

Alkali and quaternary ammonium cations interact with negatively charged cellulose nanocrystals (CNCs) bearing sulfated or carboxylated functional groups. As these are some of the most commonly occurring cations CNC encounter in applications, the thermodynamic parameters of these CNC-counterion interactions were evaluated with isothermal titration calorimetry (ITC). Whereas the adsorption of monovalent counterions onto CNCs was thermodynamically favourable at all evaluated conditions as indicated by a negative Gibbs free energy, the enthalpic and entropic contributions to the CNC-ion interactions were found to be strongly dependent on the hydration characteristics of the counterion and could be correlated with the potential barrier to water exchange of the respective ions. The adsorption of chaotropic cations onto the surface was exothermic, while the interactions with kosmotropic cations were endothermic and completely entropy-driven. The interactions of CNCs with more bulky quaternary ammonium counterions were more complex, and the mechanism of interaction shifted from electrostatic interactions with surface charged groups of CNCs towards adsorption of alkyl chains onto the CNC hydrophobic planes when the alkyl chain length increased.

AuNPs/CNC Nanocomposite with A "Dual Dispersion" Effect for LDI-TOF MS Analysis of Intact Proteins in NSCLC Serum Exosomes

Detecting exosomal markers using laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) is a novel approach for examining liquid biopsies of non-small cell lung cancer (NSCLC) samples. However, LDI-TOF MS is limited by low sensitivity and poor reproducibility when analyzing intact proteins directly. In this report, gold nanoparticles/cellulose nanocrystals (AuNPs/CNC) is introduced as the matrix for direct analysis of intact proteins in NSCLC serum exosomes. AuNPs/CNC with "dual dispersion" effects dispersed and stabilized AuNPs and improved ion inhibition effects caused by protein aggregation. These features increased the signal-to-noise ratio of [M+H]+ peaks by two orders of magnitude and lowered the detection limit of intact proteins to 0.01 mg mL-1. The coefficient of variation with or without AuNPs/CNC is measured as 10.2% and 32.5%, respectively. The excellent reproducibility yielded a linear relationship (y = 15.41x - 7.983, R2 = 0.989) over the protein concentration range of 0.01 to 20 mg mL-1. Finally, AuNPs/CNC-assisted LDI-TOF MS provides clinically relevant fingerprint information of exosomal proteins in NSCLC serum, and characteristic proteins S100 calcium-binding protein A10, Urokinase plasminogen activator surface receptor, Plasma protease C1 inhibitor, Tyrosine-protein kinase Fgr and Mannose-binding lectin associated serine protease 2 represented excellent predictive biomarkers of NSCLC risk.

Inhibiting Protein Aggregation Using Cellulose Nanocrystal in MALDI-TOF MS Analysis: Improving the Sensitivity and Repeatability of Intact Protein in Pueraria

Protein aggregation can induce low sensitivity and poor repeatability of matrix-assisted laser desorption/ionization time-of-fight mass spectrometry (MALDI-TOF MS) analysis for intact protein. Herein, we introduced a strategy to decrease protein aggregation in the sample solution by using cellulose nanocrystal (CNC). The results indicated that protein granule size was effectively reduced by adding CNC to the sample solution. Through MALDI-TOF MS analysis, the signal-to-noise ratio of [M + H]+ peak increased 2-fold, and the detection of limit was <10 μg/mL for intact protein. The CNC also contributed to excellent point-to-point repeatability for MALDI-TOF MS analysis with the coefficient of variation (CV) of 10.0% with CNC vs 48.9% without CNC in Hb solution. Also, the repeatability of Pueraria protein ion signals was improved by using CNC, and the CV with and without CNC was 16.1% and 39.6%, respectively. Moreover, protein ion intensity exhibited great linear relationship (y = 53.04x - 3.474, R2 = 0.9936) with the concentrations (ranging from 0.1 to 10 mg/mL) when using CNC. Further investigation revealed that m/z 19,000 and m/z 21,000 peaks of Pueraria could be used for the adulteration analysis and post-translational modification research, demonstrating our method has the potential for broad applications.

Enantioselective disruption of cellulose nanocrystal self-assembly into chiral nematic phases in D-alanine solutions

The chiral environment of enantiomerically pure D-alanine solutions is observed to disrupt and modify the entropy-driven assembly of cellulose nanocrystals (CNCs) into a chiral nematic mesophase. The effect is specific to D-alanine and cannot be attributed to the adsorption of alanine molecules (neither D- nor L-alanine) onto the CNC particles.

Interactions between proteins and cellulose in a liquid crystalline media: Design of a droplet based experimental platform

Model systems are needed to provide controlled environment for the understanding of complex phenomena. Interaction between polysaccharides and proteins in dense medium are involved in numerous complex systems such as biomass conversion or plant use for food processing or biobased materials. In this work, cellulose nanocrystals (CNCs) were used to study proteins in a dense and organized cellulosic environment. This environment was designed within microdroplets using a microfluidic setup, and applied to two proteins, bovine serum albumin (BSA) and a GH7 endoglucanase, relevant to food and plant science, respectively. The CNC at 56.5 g/L organized in liquid crystalline structure and the distribution of the proteins was probed using synchrotron deep-UV radiation. The proteins were homogeneously distributed throughout the volume, but BSA significantly disturbed the droplet global organization, preferring partition in hydrophilic external micelles. In contrast, GH7 partitioned with the CNCs showing stronger non-polar interaction but without disruption of the system organization. Such results pave the road for the development of more complex polysaccharides - proteins in-vitro models.

The Colloidal Properties of Nanocellulose

Nanocelluloses are anisotropic nanoparticles of semicrystalline assemblies of glucan polymers. They have great potential as renewable building blocks in the materials platform of a more sustainable society. As a result, the research on nanocellulose has grown exponentially over the last decades. To fully utilize the properties of nanocelluloses, a fundamental understanding of their colloidal behavior is necessary. As elongated particles with dimensions in a critical nanosize range, their colloidal properties are complex, with several behaviors not covered by classical theories. In this comprehensive Review, we describe the most prominent colloidal behaviors of nanocellulose by combining experimental data and theoretical descriptions. We discuss the preparation and characterization of nanocellulose dispersions, how they form networks at low concentrations, how classical theories cannot describe their behavior, and how they interact with other colloids. We then show examples of how scientists can use this fundamental knowledge to control the assembly of nanocellulose into new materials with exceptional properties. We hope aspiring and established researchers will use this Review as a guide.

Perception of the interaction behavior between pepsin and the antimicrobial drug secnidazole with combined experimental spectroscopy and computer-aided techniques

Drug-pepsin interaction possibly affects pepsin activity, leads to undesirable shift of its functionality, and likely induces adverse effects in the gastrointestinal tract. The present study aims at exploring the interaction of pepsin with the antiprotozoal/antibacterial drug secnidazole adopting a combination of experimental spectroscopy and computational techniques. For this purpose, different spectroscopic methods including fluorescence, synchronous fluorescence, UV-Visible absorption, and infrared spectroscopy were adopted and coordinated with in silico analysis via molecular docking. The employed synchronized approaches evidenced that; pepsin interacted with secnidazole via static mechanism at stomach pH inferring some consequent conformational changes in the structure of pepsin. Thermodynamic study of drug-pepsin interaction demonstrated that the interaction is spontaneous via van der Waals and hydrogen bonding interaction and the orientation of ligand within pepsin cavity was illustrated by molecular docking. The synchronous fluorescence study proved that tyrosine amino acid residues were involved in the interaction more than tryptophan amino acid residues. Eventually, the combined experimental and molecular docking approaches suggest that secnidazole interacts with pepsin and alter its structure, that finding correlates to gastrointestinal side effects related to secnidazole oral administration.

Amyloid fibril-nanocellulose interactions and self-assembly

Amyloid fibrils from inexpensive food proteins and nanocellulose are renewable and biodegradable materials with broad ranging applications, such as water purification, bioplastics and biomaterials. To improve the mechanical properties of hybrid amyloid-nanocellulose materials, their colloidal interactions need to be understood and tuned. A combination of turbidity and zeta potential measurements, rheology and atomic force microscopy point to the importance of electrostatic interactions. These interactions lead to entropy-driven polyelectrolyte complexation for positively charged hen egg white lysozyme (HEWL) amyloids with negatively charged nanocellulose. The complexation increased the elasticity of the amyloid network by cross-linking individual fibrils. Scaling laws suggest different contributions to elasticity depending on nanocellulose morphology: cellulose nanocrystals induce amyloid bundling and network formation, while cellulose nanofibrils contribute to a second network. The contribution of the amyloids to the elasticity of the entire network structure is independent of nanocellulose morphology and agrees with theoretical scaling laws. Finally, strong and almost transparent hybrid amyloid-nanocellulose gels were prepared in a slow self-assembly started from repulsive co-dispersions above the isoelectric point of the amyloids, followed by dialysis to decrease the pH and induce amyloid-nanocellulose attraction and cross-linking. In summary, the gained knowledge on colloidal interactions provides an important basis for the design of functional biohybrid materials based on these two biopolymers.

[Advances in separation and analysis of aromatic amino acids in food]

Amino acids are important building blocks of proteins in the human body, which are involved in many metabolic pathways. Patients with metabolic diseases such as phenylketonuria, tyrosinemia, and hepatic encephalopathy are genetically defective and cannot metabolize aromatic amino acids (AAA) in food; hence, a regular diet may lead to permanent physiological damage. For this reason, it is necessary to restrict the intake of AAA in their daily diet by limiting natural protein intake, while ensuring normal intake of low protein foods and supplementation with low-AAA protein equivalents. Sources of low-AAA protein equivalents currently rely on free amino acid complex mixtures and low-AAA peptides (also known as high-Fischer-ratio peptides), which have better absorption availability and palatability. AAA separation and analysis techniques are essential for the preparation and detection of low-AAA peptides. Researchers in this field have explored a variety of efficient adsorption materials to selectively remove AAA from complex protein hydrolysates and thus prepare low-AAA peptide foods, or to establish analysis strategies for AAA. Covering more than 70 publications on AAA removal and separation in the last decade from Web of Science Core Collection and China National Knowledge Infrastructure, this review analyzes the structural characteristics and physicochemical properties of AAA, and summarizes the technological progress of AAA removal based on adsorbents such as activated carbon and resin. The applications of two-dimensional nanomaterials, molecular imprinting, cyclodextrins, and metal-organic frameworks in AAA adsorption and analysis from three dimensions, i. e., sample pretreatment, chiral separation and adsorption sensing, are also reviewed. The mainstream adsorbents for AAA removal, such as activated carbon, still suffer from poor specificity and cause environmental pollution during post-use treatment. Existing AAA separating materials show impressive selective adsorption capability in food samples and chiral mixtures as well as high sensitivity in adsorption sensing. The development of an efficient detection technology for AAA may help in detecting trace AAA in food and in evaluating chiral AAA adulteration in food samples. By exploring the advantages and disadvantages of each type of technology, we provide support for the advancement of the removal and analysis techniques for AAA.

Molecular insights into the crystalline nanocellulose and human lysozyme interactions: An experimental and theoretical research

In the present research, we performed a combination of detailed computational and spectroscopic methods to determine the effect of crystalline nanocellulose (CNC) on the structure and dynamics of human lysozyme (hLyz). Fluorescence spectroscopy revealed static quenching as the major mechanism in forming a stable CNC-hLyz complex, and the binding was energetically favorable. The obtained values of the thermodynamic parameters (∆G, ∆H, and ∆S) proposed that the complex formation between the enzyme and cellulose nanocrystals is driven by electrostatic interactions, which were also confirmed by molecular dynamics (MD) simulation. Additionally, the MD simulation analysis displays that the enzyme's structural elements and tertiary structure were primarily maintained, and only loops regions were affected in the presence of cellulose nanocrystals. At the same time, circular dichroism (CD) outcomes highlighted that higher cellulose nanocrystals concentration caused a reduction in the secondary structure of hLyz. Our observations proved that low cellulose nanocrystals concentrations have no considerable effect on the human lysozyme structure. The current research results provide a valuable opportunity to elucidate the molecular interactions between protein and nanocelluloses, guiding further investigations of CNC-based material for biomedical, pharmaceutical, and food industry applications.

Molecular insight on the binding of stevia glycosides to bovine serum albumin

The interaction of the steviol and its glycosides (SG), steviolbioside, and rebaudioside A, with bovine serum albumin (BSA) was studied by absorption and fluorescence spectroscopy techniques alongside molecular docking. The stevia derivatives quenched the fluorescence of BSA by a dynamic quenching mechanism, indicating the interaction between the stevia derivatives and BSA. The binding constant (K_b) of steviol was 100-1000-fold higher than those of SG. The stevia derivative/BSA binding reaction was spontaneous and involved the formation of hydrogen bonds and van der Waals interactions between steviol and steviolbioside with BSA, and water reorganization around the rebaudioside A/BSA complex. Molecular docking pointed out the FA1 and FA9 binding sites of BSA as the probable binding sites of steviol and SG, respectively. In conclusion, steviol enhanced hydrophobicity and small size compared to SG may favor its binding to BSA. As steviol and its glycosides share binding sites on BSA with free fatty acids and drugs, they may be competitively displaced from plasma albumin under various physiological states or disease conditions. These findings are clinically relevant and provide an insight into the pharmacokinetics and pharmacodynamics of the stevia glycosides.

Interactions and Dissociation Constants of Galactomannan Rendered Cellulose Films with Concavalin A by SPR Spectroscopy

Interactions of biomolecules at interfaces are important for a variety of physiological processes. Among these, interactions of lectins with monosaccharides have been investigated extensively in the past, while polysaccharide-lectin interactions have scarcely been investigated. Here, we explore the adsorption of galactomannans (GM) extracted from Prosopis affinis on cellulose thin films determined by a combination of multi-parameter surface plasmon resonance spectroscopy (MP-SPR) and atomic force microscopy (AFM). The galactomannan adsorbs spontaneously on the cellulose surfaces forming monolayer type coverage (0.60 ± 0.20 mg·m-2). The interaction of a lectin, Concavalin A (ConA), with these GM rendered cellulose surfaces using MP-SPR has been investigated and the dissociation constant KD (2.1 ± 0.8 × 10-8 M) was determined in a range from 3.4 to 27.3 nM. The experiments revealed that the galactose side chains as well as the mannose reducing end of the GM are weakly interacting with the active sites of the lectins, whereas these interactions are potentially amplified by hydrophobic effects between the non-ionic GM and the lectins, thereby leading to an irreversible adsorption.

Self-Assembly of Soft Cellulose Nanospheres into Colloidal Gel Layers with Enhanced Protein Adsorption Capability for Next-Generation Immunoassays

Soft cationic core/shell cellulose nanospheres can deform and interpenetrate allowing their self-assembly into densely packed colloidal nanogel layers. Taking advantage of their water-swelling capacity and molecular accessibility, the nanogels are proposed as a new and promising type of coating material to immobilize bioactive molecules on thin films and paper. The specific and nonspecific interactions between the cellulosic nanogel and human immunoglobulin G as well as bovine serum albumin (BSA) are investigated. Confocal microscopy, electroacoustic microgravimetry, and surface plasmon resonance are used to access information about the adsorption behavior and viscoelastic properties of self-assembled nanogels. A significant BSA adsorption capacity on nanogel layers (17 mg m^-2 ) is measured, 300% higher compared to typical polymer coatings. This high protein affinity further confirms the promise of the introduced colloidal gel layer, in increasing sensitivity and advancing a new generation of substrates for a variety of applications, including immunoassays, as demonstrated in this work.

Engineered Multilayer Microcapsules Based on Polysaccharides Nanomaterials

The preparation of microcapsules composed by natural materials have received great attention, as they represent promising systems for the fabrication of micro-containers for controlled loading and release of active compounds, and for other applications. Using polysaccharides as the main materials is receiving increasing interest, as they constitute the main components of the plant cell wall, which represent an ideal platform to mimic for creating biocompatible systems with specific responsive properties. Several researchers have recently described methods for the preparation of microcapsules with various sizes and properties using cell wall polysaccharide nanomaterials. Researchers have focused mostly in using cellulose nanomaterials as structural components in a bio-mimetic approach, as cellulose constitutes the main structural component of the plant cell wall. In this review, we describe the microcapsules systems presented in the literature, focusing on the works where polysaccharide nanomaterials were used as the main structural components. We present the methods and the principles behind the preparation of these systems, and the interactions involved in stabilizing the structures. We show the specific and stimuli-responsive properties of the reported microcapsules, and we describe how these characteristics can be exploited for specific applications.

Electrospun PVA/hyaluronic acid/L-arginine nanofibers for wound healing applications: Nanofibers optimization and in vitro bioevaluation

Hyaluronic acid (HA) based nanofibers (NFs) represented a novel class of bioactive wound dressings that have a vital role in wound management due to their unique properties as an extracellular-matrix and accelerating wound healing. Novel L-arginine-loaded citric acid crosslinked PVA-HA NFs were fabricated by electrospinning and proposed for potential wound healing purposes. However, poor mechanical properties of HA NFs might limit its biological usage, thus this study aims to develop reinforced PVA/HA NFs by incorporation of cellulose nanocrystals (CNCs) as nanofiller and loading L-arginine as wound healing accelerator. Results revealed that incorporation of CNCs into PVA/HA significantly improved mechanical and swelling properties of NFs, compared to CNC-free NFs. Biological performance of NFs was evaluated on normal human skin melanocyte (HFB-4) and lung fibroblast (WI38) cell-lines. PVA/HA/CNC/L-arginine NFs exhibited excellent hemocompatibility, high protein adsorption, outstanding proliferative and adhesive potential on HFB-4 cells expressed by high wound gap-closure 99.9% after 48 h of exposure. Released arginine from PVA/HA/CNC NFs showed sustained release about 46.5% and ~90% after 24 h and 48 h, respectively. Briefly, PVA/HA/CNCs/L-arginine showed adequate antibacterial activity especially against Klebsiella pneumonia, as an acute popular pathogen causing a skin infection. These results indicate that PVA/HA/CNC/L-arginine could act as promising and multifunctional wound dressings.

Reversible pH Responsive Bovine Serum Albumin Hydrogel Sponge Nanolayer

A pH dependent reversible sponge like behavior of a bovine serum albumin (BSA) nanolayer adsorbed at the gold-saline interface is revealed by quartz crystal microbalance with dissipation (QCM-D), atomic force microscope (AFM) and contact angle measurements. During the saline rinsing cycles, the BSA layer adsorbs water molecules at pH 7.0 and releases them at pH 4.5. The phenomenon remains constant and reproducible upon multiple rinsing cycles. The BSA layer thickness also increases upon rinsing with saline at pH 7.0 and reverses back to its original thickness at pH 4.5. Varying ionic strength with water further desorbs more water molecules from the BSA layer, which decreases its mass and thickness. However, upon both pH and ionic strength changes, all the BSA molecules remain adsorbed irreversibly at the gold interface and only the sorption of water molecules occurs. The study aims at engineering high efficiency pH-responsive biodiagnostics and drug delivery systems.

How does cholinium cation surpass tetraethylammonium cation in amino acid-based ionic liquids for thermal and structural stability of serum albumins?

In this study, we report how similarly two serum albumins (bovine serum albumin (BSA) and human serum albumin (HSA)) respond in the presence of different concentration of aromatic amino acid based ionic liquids (AAILs), which are cholinium tryptophan [CHO][Trp]IL and tetraethylammonium tryptophan [TEA][Trp]IL. Extended results of thermodynamic stability indicate the extent to which both serum albumins differ in their thermal stability despite having structural similarity in presence of AAILs. To efficiently quantify the results, biomolecular interactions studies were carried out between serum albumins and AAILs with the help of differential scanning calorimetry (DSC), dynamic light scattering (DLS) and various spectroscopic techniques. DSC results illustrated that both AAILs are increasing the thermal stability of BSA and HSA, as per transition temperature (T_m) values, BSA (65.51 to 72.46 °C) and HSA (65.46 to 75.97 °C) have more thermal stability in the presence of [CHO][Trp]IL as compare to [TEA][Trp]IL, BSA (65.51 to 69.75 °C) and HSA (65.46 to 72.08 °C). Secondary structure results obtained using Dichroweb software and selcon calculations. Furthermore, to illustrate the specific binding of AAIL's cations or anions with the binding sites of BSA and HSA, the molecular docking studies were also performed using Molegro trail version v 6.0.

Characterization and Cellular Internalization of Spherical Cellulose Nanocrystals (CNC) into Normal and Cancerous Fibroblasts

The aim was to isolate cellulose nanocrystals (CNC) from commercialized oil palm empty fruit bunch cellulose nanofibre (CNF) through sulphuric acid hydrolysis and explore its safeness as a potential nanocarrier. Successful extraction of CNC was confirmed through a field emission scanning electron microscope (FESEM) and attenuated total reflection Fourier transmission infrared (ATR-FTIR) spectrometry analysis. For subsequent cellular uptake study, the spherical CNC was covalently tagged with fluorescein isothiocyanate (FITC), resulting in negative charged FITC-CNC nanospheres with a dispersity (Ð) of 0.371. MTT assay revealed low degree cytotoxicity for both CNC and FITC-CNC against C6 rat glioma and NIH3T3 normal fibroblasts up to 50 µg/mL. FITC conjugation had no contribution to the particle's toxicity. Through confocal laser scanning microscope (CLSM), synthesized FITC-CNC manifested negligible cellular accumulation, indicating a poor non-selective adsorptive endocytosis into studied cells. Overall, an untargeted CNC-based nanosphere with less cytotoxicity that posed poor selectivity against normal and cancerous cells was successfully synthesized. It can be considered safe and suitable to be developed into targeted nanocarrier.

Thermodynamic Study of Ion-Driven Aggregation of Cellulose Nanocrystals

The thermodynamics of interactions between cations of the second group of the periodic table and differently negatively charged cellulose nanocrystals was investigated using isothermal titration calorimetry (ITC). The interaction of cations with the negatively charged CNCs was found to be endothermic and driven by an increase in entropy upon adsorption of the ions, due to an increase in degrees of freedom gained by the surface bound water upon ion adsorption. The effect was pH-dependent, showing an increase in enthalpy for cellulose suspensions at near-neutral pH (6.5) when compared to acidic pH (2). Sulfated cellulose nanoparticles were found to readily interact with divalent ions at both pH levels. The adsorption on carboxylate nanocrystals was found to be pH dependent, showing that the carboxylic group needs to be in the deprotonated form to interact with divalent ions. For the combined system (sulfate and carboxylate present at the same time), at neutral pH, the adsorption enthalpy was higher than the value obtained from cellulose nanocrystals containing a single functional group, while the association constant was higher due to an increased favorable entropic contribution. The higher entropic contribution indicates a more restricted surface-bound water layer when multiple functionalities are present. The stoichiometric number n was nearly constant for all systems, showing that the adsorption depends almost completely on the ion valency and on the amount of ionic groups on the CNC surface, independent of the type of functional group on the CNC surface as long as it is deprotonated. In addition, we showed that the reduction in Gibbs free energy drives the ionotropic gelation of nanocellulose suspensions, and we show that ITC is able to detect gel formation at the same time as determining the critical association concentration.

Nanocellulose-Based Conductive Membranes for Free-Standing Supercapacitors: A Review

There is currently strong demand for the development of advanced energy storage devices with inexpensive, flexibility, lightweight, and eco-friendly materials. Cellulose is considered as a suitable material that has the potential to meet the requirements of the advanced energy storage devices. Specifically, nanocellulose has been shown to be an environmentally friendly material that has low density and high specific strength, Young's modulus, and surface-to-volume ratio compared to synthetic materials. Furthermore, it can be isolated from a variety of plants through several simple and rapid methods. Cellulose-based conductive composite membranes can be assembled into supercapacitors to achieve free-standing, lightweight, and flexible energy storage devices. Therefore, they have attracted extensive research interest for the development of small-size wearable devices, implantable sensors, and smart skin. Various conductive materials can be loaded onto nanocellulose substrates to endow or enhance the electrochemical performance of supercapacitors by taking advantage of the high loading capacity of nanocellulose membranes for brittle conductive materials. Several factors can impact the electronic performance of a nanocellulose-based supercapacitor, such as the methods of loading conductive materials and the types of conductive materials, as will be discussed in this review.

Recent advances in nanoengineering cellulose for cargo delivery

The recent decade has witnessed a growing demand to substitute synthetic materials with naturally-derived platforms for minimizing their undesirable footprints in biomedicine, environment, and ecosystems. Among the natural materials, cellulose, the most abundant biopolymer in the world with key properties, such as biocompatibility, biorenewability, and sustainability has drawn significant attention. The hierarchical structure of cellulose fibers, one of the main constituents of plant cell walls, has been nanoengineered and broken down to nanoscale building blocks, providing an infrastructure for nanomedicine. Microorganisms, such as certain types of bacteria, are another source of nanocelluloses known as bacterial nanocellulose (BNC), which benefit from high purity and crystallinity. Chemical and mechanical treatments of cellulose fibrils made up of alternating crystalline and amorphous regions have yielded cellulose nanocrystals (CNC), hairy CNC (HCNC), and cellulose nanofibrils (CNF) with dimensions spanning from a few nanometers up to several microns. Cellulose nanocrystals and nanofibrils may readily bind drugs, proteins, and nanoparticles through physical interactions or be chemically modified to covalently accommodate cargos. Engineering surface properties, such as chemical functionality, charge, area, crystallinity, and hydrophilicity, plays a pivotal role in controlling the cargo loading/releasing capacity and rate, stability, toxicity, immunogenicity, and biodegradation of nanocellulose-based delivery platforms. This review provides insights into the recent advances in nanoengineering cellulose crystals and fibrils to develop vehicles, encompassing colloidal nanoparticles, hydrogels, aerogels, films, coatings, capsules, and membranes, for the delivery of a broad range of bioactive cargos, such as chemotherapeutic drugs, anti-inflammatory agents, antibacterial compounds, and probiotics. SYNOPSIS: Engineering certain types of microorganisms as well as the hierarchical structure of cellulose fibers, one of the main building blocks of plant cell walls, has yielded unique families of cellulose-based nanomaterials, which have leveraged the effective delivery of bioactive molecules.

Lectins at Interfaces-An Atomic Force Microscopy and Multi-Parameter-Surface Plasmon Resonance Study

Lectins are a diverse class of carbohydrate binding proteins with pivotal roles in cell communication and signaling in many (patho)physiologic processes in the human body, making them promising targets in drug development, for instance, in cancer or infectious diseases. Other applications of lectins employ their ability to recognize specific glycan epitopes in biosensors and glycan microarrays. While a lot of research has focused on lectin interaction with specific carbohydrates, the interaction potential of lectins with different types of surfaces has not been addressed extensively. Here, we screen the interaction of two specific plant lectins, Concanavalin A and Ulex Europaeus Agglutinin-I with different nanoscopic thin films. As a control, the same experiments were performed with Bovine Serum Albumin, a widely used marker for non-specific protein adsorption. In order to test the preferred type of interaction during adsorption, hydrophobic, hydrophilic and charged polymer films were explored, such as polystyrene, cellulose, N,-N,-N-trimethylchitosan chloride and gold, and characterized in terms of wettability, surface free energy, zeta potential and morphology. Atomic force microscopy images of surfaces after protein adsorption correlated very well with the observed mass of adsorbed protein. Surface plasmon resonance spectroscopy studies revealed low adsorbed amounts and slow kinetics for all of the investigated proteins for hydrophilic surfaces, making those resistant to non-specific interactions. As a consequence, they may serve as favorable supports for biosensors, since the use of blocking agents is not necessary.

Real-Time Adsorption of Exo- and Endoglucanases on Cellulose: Effect of pH, Temperature, and Inhibitors

Effective regulation of cellulase adsorption is key to improving the efficiencies of the two major bottlenecks of lignocellulose hydrolysis and cellulase recovery. In this work, we investigated the effect of inhibitors, pH, and temperature on the adsorption of exo- and endoglucanases (Cel7A and Cel7B, respectively) on cellulose using quartz crystal microgravimetry with dissipation. The addition of glucose and cellobiose can both inhibit the hydrolysis activity of Cel7A, whereas only cellobiose can inhibit that of Cel7B. Notably, the adsorption was favored by acidic conditions (pH ≤ 4.8) and low temperature, whereas alkaline conditions (pH 9 and 10) facilitated enzyme desorption, which is useful to guide the process of cellulase recovery. The adsorption and hydrolysis activity of Cel7A and Cel7B were both higher at 45 °C than at 25 °C. These findings pave the way to effective regulation of cellulase adsorption and thus improve lignocellulose conversion and cellulase recovery.

Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications

With increasing environmental and ecological concerns due to the use of petroleum-based chemicals and products, the synthesis of fine chemicals and functional materials from natural resources is of great public value. Nanocellulose may prove to be one of the most promising green materials of modern times due to its intrinsic properties, renewability, and abundance. In this review, we present nanocellulose-based materials from sourcing, synthesis, and surface modification of nanocellulose, to materials formation and applications. Nanocellulose can be sourced from biomass, plants, or bacteria, relying on fairly simple, scalable, and efficient isolation techniques. Mechanical, chemical, and enzymatic treatments, or a combination of these, can be used to extract nanocellulose from natural sources. The properties of nanocellulose are dependent on the source, the isolation technique, and potential subsequent surface transformations. Nanocellulose surface modification techniques are typically used to introduce either charged or hydrophobic moieties, and include amidation, esterification, etherification, silylation, polymerization, urethanization, sulfonation, and phosphorylation. Nanocellulose has excellent strength, high Young's modulus, biocompatibility, and tunable self-assembly, thixotropic, and photonic properties, which are essential for the applications of this material. Nanocellulose participates in the fabrication of a large range of nanomaterials and nanocomposites, including those based on polymers, metals, metal oxides, and carbon. In particular, nanocellulose complements organic-based materials, where it imparts its mechanical properties to the composite. Nanocellulose is a promising material whenever material strength, flexibility, and/or specific nanostructuration are required. Applications include functional paper, optoelectronics, and antibacterial coatings, packaging, mechanically reinforced polymer composites, tissue scaffolds, drug delivery, biosensors, energy storage, catalysis, environmental remediation, and electrochemically controlled separation. Phosphorylated nanocellulose is a particularly interesting material, spanning a surprising set of applications in various dimensions including bone scaffolds, adsorbents, and flame retardants and as a support for the heterogenization of homogeneous catalysts.

Molecular mechanism investigation on the interactions of copper (II) ions with glutathione peroxidase 6 from Arabidopsis thaliana

Accumulation of copper (II) ions in plant leads to the excessive reactive oxygen species (ROS) which attributes to the depletion of the antioxidants in the cell and destruction to antioxidant enzymes. The antioxidant enzyme glutathione peroxidase has been used as biomarkers to reflect metal-induced oxidative stress. However, the underlying toxic mechanisms of the copper ions(II)-induced oxidative damage to plants remain unknown. In the work, a detailed molecular interaction of copper (II) ions with Arabidopsis thaliana glutathione peroxidase 6 (AtGPX6) in relation with poisonous effects of exposure to heavy metal was investigated by multiple spectroscopic techniques. The intrinsic fluorescence of AtGPX6 was quenched upon the addition of copper (II) ions by the combination of static and dynamic quenching mechanisms accompanied by complex formation and conformational changes. A single binding site was revealed for AtGPX6 towards copper ions. The binding process was hydrophobic effect accompanied by positive entropy change and enthalpy change. The secondary structure of AtGPX6 was changed by the addition of copper ions investigated by synchronous fluorescence spectroscopy, ultraviolet-visible absorption spectroscopy and circular dichroism spectroscopy, resulting in loosened and deconstructed protein skeleton and increased hydrophobicity around the Trp residues. This study helps to illuminate the detailed interactions between copper ions and plant glutathione peroxidase and elucidate the destructive mechanism to antioxidative defense system caused by heavy metal exposure at molecular level.

Toward Improved Understanding of the Interactions between Poorly Soluble Drugs and Cellulose Nanofibers

Cellulose nanofibers (CNFs) have interesting physicochemical and colloidal properties that have been recently exploited in novel drug-delivery systems for tailored release of poorly soluble drugs. The morphology and release kinetics of such drug-delivery systems heavily relied on the drug-CNF interactions; however, in-depth understanding of the interactions was lacking. Herein, the interactions between a poorly soluble model drug molecule, furosemide, and cationic cellulose nanofibers with two different degrees of substitution are studied by sorption experiments, Fourier transform infrared spectroscopy, and molecular dynamics (MD) simulation. Both MD simulations and experimental results confirmed the spontaneous sorption of drug onto CNF. Simulations further showed that adsorption occurred by the flat aryl ring of furosemide. The spontaneous sorption was commensurate with large entropy gains as a result of release of surface-bound water. Association between furosemide molecules furthermore enabled surface precipitation as indicated by both simulations and experiments. Finally, sorption was also found not to be driven by charge neutralization, between positive CNF surface charges and the furosemide negative charge, so that surface area is the single most important parameter determining the amount of sorbed drug. An optimized CNF-furosemide drug-delivery vehicle thus needs to have a maximized specific surface area irrespective of the surface charge with which it is achieved. The findings also provide important insights into the design principles of CNF-based filters suitable for removal of poorly soluble drugs from wastewater.

Thermodynamics of the interactions of positively charged cellulose nanocrystals with molecules bearing different amounts of carboxylate anions

We report a thermodynamic study of the interactions between charged cellulose nanocrystals and ionic species in water.