1
|
Zhang Z, Chen H, Diao W, Zhou C, Liu G. Simultaneous binding of carboxyl and amino groups to liquid metal surface for biosensing. J Mater Chem B 2024; 12:9703-9712. [PMID: 39196611 DOI: 10.1039/d4tb01459f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/29/2024]
Abstract
Eutectic gallium indium (EGaIn) nanoparticles can be modified with aniline derivatives to introduce versatile functional groups toward bioapplications beyond materials science. p-Aminobenzoic acid (PABA) modified EGaIn (EGaIn-PABA) demonstrated high wettability due to the presence of carboxyl groups, but the priority of binding of carboxyl and amino groups on the EGaIn surface remains unclear. To study the binding nature of PABA to EGaIn, the anti-mouse IgG antibody labeled with fluorescein isothiocyanate (FITC) (IgG-FITC) was covalently modified to EGaIn-PABA to verify the presence of terminal carboxyl groups on the EGaIn surface. The binding of gold nanoparticles (AuNPs) to EGaIn-PABA nanoparticles suggested the presence of terminal amino groups on the EGaIn surface. Then, taking advantage of the reductive nature of amino groups, the Almar blue fluorescence experiment was designed to determine the co-existence of carboxyl and amino groups on the EGaIn-PABA surface with an approximate ratio of 3 : 7, suggesting that carboxyl groups had a higher probability of binding with the EGaIn surface than that of amino groups. Then, an aptasensor was fabricated on the EGaIn-PABA surface with AuNPs for electrochemical detection of interleukin-6 with a sensitivity of 1 pg mL-1.
Collapse
Affiliation(s)
- Zhiheng Zhang
- Integrated Devices and Intelligent Diagnosis (ID2) Laboratory, CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China.
| | - Hongchen Chen
- Integrated Devices and Intelligent Diagnosis (ID2) Laboratory, CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China.
| | - Weize Diao
- Integrated Devices and Intelligent Diagnosis (ID2) Laboratory, CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China.
| | - Chuangxin Zhou
- Integrated Devices and Intelligent Diagnosis (ID2) Laboratory, CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China.
| | - Guozhen Liu
- Integrated Devices and Intelligent Diagnosis (ID2) Laboratory, CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China.
| |
Collapse
|
2
|
Patil D, Liu S, Ravichandran D, Thummalapalli SV, Zhu Y, Tang T, Golan Y, Miquelard-Garnier G, Asadi A, Li X, Chen X, Song K. Versatile Patterning of Liquid Metal via Multiphase 3D Printing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2402432. [PMID: 38850181 DOI: 10.1002/smll.202402432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/27/2024] [Revised: 05/13/2024] [Indexed: 06/10/2024]
Abstract
This paper presents a scalable and straightforward technique for the immediate patterning of liquid metal/polymer composites via multiphase 3D printing. Capitalizing on the polymer's capacity to confine liquid metal (LM) into diverse patterns. The interplay between distinctive fluidic properties of liquid metal and its self-passivating oxide layer within an oxidative environment ensures a resilient interface with the polymer matrix. This study introduces an inventive approach for achieving versatile patterns in eutectic gallium indium (EGaIn), a gallium alloy. The efficacy of pattern formation hinges on nozzle's design and internal geometry, which govern multiphase interaction. The interplay between EGaIn and polymer within the nozzle channels, regulated by variables such as traverse speed and material flow pressure, leads to periodic patterns. These patterns, when encapsulated within a dielectric polymer polyvinyl alcohol (PVA), exhibit an augmented inherent capacitance in capacitor assemblies. This discovery not only unveils the potential for cost-effective and highly sensitive capacitive pressure sensors but also underscores prospective applications of these novel patterns in precise motion detection, including heart rate monitoring, and comprehensive analysis of gait profiles. The amalgamation of advanced materials and intricate patterning techniques presents a transformative prospect in the domains of wearable sensing and comprehensive human motion analysis.
Collapse
Affiliation(s)
- Dhanush Patil
- School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University, Mesa, AZ, 85212, USA
| | - Siying Liu
- School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University, Mesa, AZ, 85212, USA
| | - Dharneedar Ravichandran
- School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University, Mesa, AZ, 85212, USA
| | | | - Yuxiang Zhu
- School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University, Mesa, AZ, 85212, USA
| | - Tengteng Tang
- The School for Engineering of Matter, Transport and Energy (SEMTE), Ira Fulton Schools of Engineering, Arizona State University, Tempe, AZ, 85281, USA
| | - Yuval Golan
- Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva, 8410501, Israel
- Ilse Katz Institute for Nanoscale Science and Technology, Ben-Gurion University of the Negev, Beer-Sheva, 8410501, Israel
| | - Guillaume Miquelard-Garnier
- Laboratoire PIMM, CNRS, Arts at Métiers Institute of Technology, Cnam, HESAM Universite, 151 Boulevard de l'Hopital, Paris, 75013, France
| | - Amir Asadi
- Department of Engineering Technology and Industrial Distribution, Texas A&M University, College Station, TX, 77843-3367, USA
| | - Xiangjia Li
- The School for Engineering of Matter, Transport and Energy (SEMTE), Ira Fulton Schools of Engineering, Arizona State University, Tempe, AZ, 85281, USA
| | - Xiangfan Chen
- School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University, Mesa, AZ, 85212, USA
| | - Kenan Song
- School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University, Mesa, AZ, 85212, USA
- School of Environmental, Civil, Agricultural and Mechanical (ECAM), University of Georgia, Athens, GA, 30602, USA
| |
Collapse
|
3
|
Ye S, Chen X, Sun X, Patel SB, Wu Y, Singler TJ, Zhang P, Zhou G. Oxidation-Induced Oxide Shell Rupture and Phase Separation in Eutectic Gallium-Indium Nanoparticles. ACS NANO 2024; 18:25107-25117. [PMID: 39190644 DOI: 10.1021/acsnano.4c06764] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/29/2024]
Abstract
Eutectic gallium-indium (EGaIn), a room-temperature liquid metal, has garnered significant attention for its applications in soft electronics, multifunctional materials, energy engineering and drug delivery. A key factor influencing these diverse applications is the spontaneous formation of a native passivating oxide shell that not only encapsulates the liquid metal but also alters the properties from the bulk counterpart. Using environmental scanning transmission electron microscopy, we report in situ observations of the oxidation of EGaIn nanoparticles by ambient air under high-energy electron beam irradiation. Our findings demonstrate that uneven oxide shell growth, driven by inward diffusion of adsorbed O species, creates unbalanced stresses. This compels the liquid metal to deform toward regions with slower oxide growth, resulting in shell rupture and allowing the liquid metal core to flow out. This process initiates top-down self-similar replication of the core-shell liquid metal nanoparticles, causing larger particles to break down into smaller particles. Additionally, internal oxidation triggers phase separation within the liquid core, ultimately leading to the pulverization of the liquid metal into finer solid particles rich in indium. These mechanistic insights into the oxidation behavior of the liquid metal hold practical implications for leveraging this process to reconfigure EGaIn nanoparticles for various applications.
Collapse
Affiliation(s)
- Shuonan Ye
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Xiaobo Chen
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Xianhu Sun
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Shyam Bharatkumar Patel
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Yupeng Wu
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Timothy J Singler
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Pu Zhang
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| | - Guangwen Zhou
- Department of Mechanical Engineering & Materials Science and Engineering Program, State University of New York at Binghamton, Binghamton, New York 13902, United States
| |
Collapse
|
4
|
Agnew SA, Tiwari AP, Ong SW, Rahman MS, Scheideler WJ. Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2403801. [PMID: 39051520 DOI: 10.1002/smll.202403801] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2024] [Revised: 06/18/2024] [Indexed: 07/27/2024]
Abstract
2D native surface oxides formed on low melting temperature metals such as indium and gallium offer unique opportunities for fabricating high-performance flexible electronics and optoelectronics based on a new class of liquid metal printing (LMP). An inherent property of these Cabrera-Mott 2D oxides is their suboxide nature (e.g., In2O3-x), which leads high mobility LMP semiconductors to exhibit high electron concentrations (ne > 1019 cm-3) limiting electrostatic control. Binary alloying of the molten precursor can produce doped, ternary metal oxides such as In-X-O with enhanced electronic performance and greater bias-stress stability, though this approach demands a deeper understanding of the native oxides of alloys. This work presents an approach for hypoeutectic rapid LMP of crystalline InGaOx (IGO) at ultralow process temperatures (180 °C) beyond the state of the art to fabricate transistors with 10X steeper subthreshold slope and high mobility (≈18 cm2 Vs-1). Detailed characterization of IGO crystallinity, composition, and morphology, as well as measurements of its electronic density of states (DOS), show the impact of Ga-doping and reveal the limits of doping induced amorphization from hypoeutectic precursors. The ultralow process temperatures and compatibility with high-k Al2O3 dielectrics shown here indicate potential for 2D IGO to drive low-power flexible transparent electronics.
Collapse
Affiliation(s)
- Simon A Agnew
- Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA
| | - Anand P Tiwari
- Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA
| | - Samuel W Ong
- Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA
| | - Md Saifur Rahman
- Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA
| | | |
Collapse
|
5
|
Vo TS, Hoang T, Vo TTBC, Jeon B, Nguyen VH, Kim K. Recent Trends of Bioanalytical Sensors with Smart Health Monitoring Systems: From Materials to Applications. Adv Healthc Mater 2024; 13:e2303923. [PMID: 38573175 PMCID: PMC11468404 DOI: 10.1002/adhm.202303923] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2023] [Revised: 03/09/2024] [Indexed: 04/05/2024]
Abstract
Smart biosensors attract significant interest due to real-time monitoring of user health status, where bioanalytical electronic devices designed to detect various activities and biomarkers in the human body have potential applications in physical sign monitoring and health care. Bioelectronics can be well integrated by output signals with wireless communication modules for transferring data to portable devices used as smart biosensors in performing real-time diagnosis and analysis. In this review, the scientific keys of biosensing devices and the current trends in the field of smart biosensors, (functional materials, technological approaches, sensing mechanisms, main roles, potential applications and challenges in health monitoring) will be summarized. Recent advances in the design and manufacturing of bioanalytical sensors with smarter capabilities and enhanced reliability indicate a forthcoming expansion of these smart devices from laboratory to clinical analysis. Therefore, a general description of functional materials and technological approaches used in bioelectronics will be presented after the sections of scientific keys to bioanalytical sensors. A careful introduction to the established systems of smart monitoring and prediction analysis using bioelectronics, regarding the integration of machine-learning-based basic algorithms, will be discussed. Afterward, applications and challenges in development using these smart bioelectronics in biological, clinical, and medical diagnostics will also be analyzed. Finally, the review will conclude with outlooks of smart biosensing devices assisted by machine learning algorithms, wireless communications, or smartphone-based systems on current trends and challenges for future works in wearable health monitoring.
Collapse
Affiliation(s)
- Thi Sinh Vo
- School of Mechanical EngineeringSungkyunkwan UniversitySuwon16419South Korea
| | - Trung Hoang
- Department of BiophysicsSungkyunkwan UniversitySuwon16419South Korea
- Institute of Quantum BiophysicsSungkyunkwan UniversitySuwon16419South Korea
| | - Tran Thi Bich Chau Vo
- Faculty of Industrial ManagementCollege of EngineeringCan Tho UniversityCan Tho900000Vietnam
| | - Byounghyun Jeon
- School of Mechanical EngineeringSungkyunkwan UniversitySuwon16419South Korea
| | - Vu Hoang Nguyen
- Department of Mechanical and Aerospace EngineeringMonash UniversityClaytonVIC3800Australia
| | - Kyunghoon Kim
- School of Mechanical EngineeringSungkyunkwan UniversitySuwon16419South Korea
| |
Collapse
|
6
|
Kim JH, Kim S, Dickey MD, So JH, Koo HJ. Interface of gallium-based liquid metals: oxide skin, wetting, and applications. NANOSCALE HORIZONS 2024; 9:1099-1119. [PMID: 38716614 DOI: 10.1039/d4nh00067f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/25/2024]
Abstract
Gallium-based liquid metals (GaLMs) are promising for a variety of applications-especially as a component material for soft devices-due to their fluidic nature, low toxicity and reactivity, and high electrical and thermal conductivity comparable to solid counterparts. Understanding the interfacial properties and behaviors of GaLMs in different environments is crucial for most applications. When exposed to air or water, GaLMs form a gallium oxide layer with nanoscale thickness. This "oxide nano-skin" passivates the metal surface and allows for the formation of stable microstructures and films despite the high-surface tension of liquid metal. The oxide skin easily adheres to most smooth surfaces. While it enables effective printing and patterning of the GaLMs, it can also make the metals challenging to handle because it adheres to most surfaces. The oxide also affects the interfacial electrical resistance of the metals. Its formation, thickness, and composition can be chemically or electrochemically controlled, altering the physical, chemical, and electrical properties of the metal interface. Without the oxide, GaLMs wet metallic surfaces but do not wet non-metallic substrates such as polymers. The topography of the underlying surface further influences the wetting characteristics of the metals. This review outlines the interfacial attributes of GaLMs in air, water, and other environments and discusses relevant applications based on interfacial engineering. The effect of surface topography on the wetting behaviors of the GaLMs is also discussed. Finally, we suggest important research topics for a better understanding of the GaLMs interface.
Collapse
Affiliation(s)
- Ji-Hye Kim
- Department of Energy and Chemical Engineering, Seoul National University of Science & Technology, 232 Gongneung-ro, Nowon-gu, Seoul, 01811, Republic of Korea
| | - Sooyoung Kim
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA.
| | - Michael D Dickey
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA.
| | - Ju-Hee So
- Material & Component Convergence R&D Department, Korea Institute of Industrial Technology, Ansan-si, 15588, Republic of Korea.
| | - Hyung-Jun Koo
- Department of Chemical & Biomolecular Engineering, Seoul National University of Science & Technology, 232 Gongneung-ro, Nowon-gu, Seoul, 01811, Republic of Korea.
| |
Collapse
|
7
|
Zhang L, Kong C, Li Y, He Y, Guo X, Shi D, Zhang X, Hu J. Multi-scale bioimpedance flexible sensing with causal hierarchical machine learning for fish vitality evaluation under adversity stress. Biosens Bioelectron 2024; 254:116190. [PMID: 38479340 DOI: 10.1016/j.bios.2024.116190] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2023] [Revised: 02/17/2024] [Accepted: 03/04/2024] [Indexed: 04/02/2024]
Abstract
It is expected that waterless low-temperature stressful environments will induce stress responses in fish and affect their vitality. In this study, we developed a laser-activated, stretchable, highly conductive liquid metal (LM) based flexible sensor system for fish multi-scale bioimpedance detection. It has excellent conformability, electrical conductivity, bending and cyclic tensile stability. Meanwhile, test result showed that wireless power supply is a potential solution for realizing safe power supply for devices inside waterless low-temperature packages. In addition, a hierarchical regression model (GC-HRM) based on Granger causality was established. The result showed that tissue bioimpedance can induce changes in individual bioimpedance with unidirectional Granger causality. The R2 of the linear regression (LR), support vector regression (SVR) and artificial neural network (ANN) models under single-scale individual bioimpedance were 0.85, 0.90 and 0.78, respectively. By adding the multi-scale bioimpedance features, the R2 of the LR, SVR and ANN models were improved to 0.95, 1.00 and 0.98, respectively.
Collapse
Affiliation(s)
- Luwei Zhang
- College of Engineering, China Agricultural University, Beijing, 100083, China
| | - Chuiyu Kong
- College of Engineering, China Agricultural University, Beijing, 100083, China
| | - You Li
- College of Engineering, China Agricultural University, Beijing, 100083, China
| | - Yanfu He
- School of Food Science and Engineering, Hainan University, Haikou, 570100, China
| | - Xiangyun Guo
- School of Information Management, Beijing Information Science & Technology University, Beijing, 100192, China
| | - Dongjie Shi
- Fisheries Research Institute, Beijing Academy of Agriculture and Forestry Sciences, Beijing, 100068, China
| | - Xiaoshuan Zhang
- College of Engineering, China Agricultural University, Beijing, 100083, China; Sanya Institute of China Agricultural University, Sanya, 572025, China.
| | - Jinyou Hu
- College of Engineering, China Agricultural University, Beijing, 100083, China.
| |
Collapse
|
8
|
Huang T, Huang S, Liu D, Zhu W, Wu Q, Chen L, Zhang X, Liu M, Wei Y. Recent advances and progress on the design, fabrication and biomedical applications of Gallium liquid metals-based functional materials. Colloids Surf B Biointerfaces 2024; 238:113888. [PMID: 38599077 DOI: 10.1016/j.colsurfb.2024.113888] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2024] [Revised: 03/20/2024] [Accepted: 03/30/2024] [Indexed: 04/12/2024]
Abstract
Gallium (Ga) is a well-known liquid metals (LMs) that possesses the features, such as fluidity, low viscosity, high electrical and thermal conductivity, and relative low toxicity. Owing to the weak interactions between Ga atoms, Ga LMs can be adopted for fabrication of various Ga LMs-based functional materials via ultrasonic treatment and mechanical grinding. Moreover, many organic compounds/polymers can be coated on the surface of LMs-based materials through coordination between oxidized outlayers of Ga LMs and functional groups of organic components. Over the past decades, different strategies have been reported for synthesizing Ga LMs-based functional materials and their biomedical applications have been intensively investigated. Although some review articles have published over the past few years, a concise review is still needed to advance the latest developments in biomedical fields. The main context can be majorly divided into two parts. In the first section, various strategies for fabrication of Ga LMs-based functional materials via top-down strategies were introduced and discussed. Following that, biomedical applications of Ga LMs-based functional materials were summarized and design Ga LMs-based functional materials with enhanced performance for cancer photothermal therapy (PTT) and PTT combined therapy were highlighted. We trust this review article will be beneficial for scientists to comprehend this promising field and greatly advance future development for fabrication of other Ga LMs-based functional materials with better performance for biomedical applications.
Collapse
Affiliation(s)
- Tongsheng Huang
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China
| | - Shiyu Huang
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China
| | - Dong Liu
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China
| | - Weifeng Zhu
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China
| | - Qinghua Wu
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China
| | - Lihua Chen
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China.
| | - Xiaoyong Zhang
- Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031, China.
| | - Meiying Liu
- Key Laboratory of Modern Preparation of TCM, Ministry of Education, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, China.
| | - Yen Wei
- Department of Chemistry and the Tsinghua Center for Frontier Polymer Research, Tsinghua University, Beijing 100084, China
| |
Collapse
|
9
|
Muller B, Feig VR, Colella NS, Traverso G, Hashmi SM. Thiol Coordination Softens Liquid Metal Particles To Improve On-Demand Conductivity. ACS NANO 2024; 18:13768-13780. [PMID: 38745441 PMCID: PMC11140741 DOI: 10.1021/acsnano.4c01988] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/09/2024] [Revised: 04/24/2024] [Accepted: 05/02/2024] [Indexed: 05/16/2024]
Abstract
Achieving tunable rupturing of eutectic gallium indium (EGaIn) particles holds great significance in flexible electronic applications, particularly pressure sensors. We tune the mechanosensitivity of EGaIn particles by preparing them in toluene with thiol surfactants and demonstrate an improvement over typical preparations in ethanol. We observe, across multiple length scales, that thiol surfactants and the nonpolar solvent synergistically reduce the applied stress requirements for electromechanical actuation. At the nanoscale, dodecanethiol and propanethiol in toluene suppress gallium oxide growth, as characterized by transmission electron microscopy and X-ray photoelectron spectroscopy. Quantitative AFM imaging produces force-indentation curves and height images, while conductive AFM measures current while probing individual EGaIn particles. As the applied force increases, thiolated particles demonstrate intensified softening, rupturing, and stress-induced electrical activation at forces 40% lower than those for bare particles in ethanol. To confirm that thiolation facilitates rupturing at the macroscale, a laser is used to ablate samples of EGaIn particles. Scanning electron microscopy and resistance measurements across macroscopic samples confirm that thiolated EGaIn particles coalesce to exhibit electrical activation at 0.1 W. Particles prepared in ethanol, however, require 3 times higher laser power to demonstrate a similar behavior. This unique collection of advanced techniques demonstrates that our particle synthesis conditions can facilitate on-demand functionality to benefit electronic applications.
Collapse
Affiliation(s)
- Benjamin
N. Muller
- Department
of Chemistry and Chemical Biology, Northeastern
University, Boston, Massachusetts 02115, United States
- Division
of Gastroenterology, Hepatology and Endoscopy, Brigham and Women’s
Hospital, Harvard Medical School, Boston, Massachusetts 02115, United States
- David
H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Vivian R. Feig
- Division
of Gastroenterology, Hepatology and Endoscopy, Brigham and Women’s
Hospital, Harvard Medical School, Boston, Massachusetts 02115, United States
- David
H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Nicholas S. Colella
- Center
for Nanoscale Systems, Harvard University, Cambridge, Massachusetts 02138, United States
| | - Giovanni Traverso
- Division
of Gastroenterology, Hepatology and Endoscopy, Brigham and Women’s
Hospital, Harvard Medical School, Boston, Massachusetts 02115, United States
- David
H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
- Department
of Mechanical Engineering, Massachusetts
Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Sara M. Hashmi
- Department
of Chemistry and Chemical Biology, Northeastern
University, Boston, Massachusetts 02115, United States
- Department
of Chemical Engineering, Northeastern University, Boston, Massachusetts 02115, United States
- Department
of Mechanical and Industrial Engineering, Northeastern University, Boston, Massachusetts 02115, United States
| |
Collapse
|
10
|
Wang M, Lin Y. Gallium-based liquid metals as reaction media for nanomaterials synthesis. NANOSCALE 2024; 16:6915-6933. [PMID: 38501969 DOI: 10.1039/d3nr06566a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/20/2024]
Abstract
Gallium-based liquid metals (LMs) and their alloys have gained prominence in the realm of flexible and stretchable electronics. Recent advances have expanded the interest to explore the electron-rich core and interface of LMs to synthesize various nanomaterials, where Ga-based LMs serve as versatile reaction media. In this paper, we delve into the latest developments within this burgeoning field. Our discussion begins by elucidating the unique attributes of LMs that render them suitable as reaction media, including their high metal solubility, low standard reduction potential, self-limiting oxidation and ultra-smooth and "layer" surface. We then provide a comprehensive categorized summary of utilizing these features to fabricate a variety of nanomaterials, including pure metallic materials (metal alloys, metal crystals, porous metals, high-entropy alloys and metallic single atoms), metal-inorganic compounds (2D metal oxides, 2D metallic inorganic compounds and 2D graphitic materials), as well as metal-organic composites (metal-organic frameworks). This paper concludes by discussing the current challenges in this field and exploring potential future directions. The versatility and unique properties of Ga-based LMs are poised to play a pivotal role in the future of nanomaterial science, paving the way for more efficient, sustainable, and innovative technological solutions.
Collapse
Affiliation(s)
- Ming Wang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Engineering Drive 4, 117585, Singapore.
| | - Yiliang Lin
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Engineering Drive 4, 117585, Singapore.
| |
Collapse
|
11
|
Zhu J, Li J, Tong Y, Hu T, Chen Z, Xiao Y, Zhang S, Yang H, Gao M, Pan T, Cheng H, Lin Y. Recent progress in multifunctional, reconfigurable, integrated liquid metal-based stretchable sensors and standalone systems. PROGRESS IN MATERIALS SCIENCE 2024; 142:101228. [PMID: 38745676 PMCID: PMC11090487 DOI: 10.1016/j.pmatsci.2023.101228] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2024]
Abstract
Possessing a unique combination of properties that are traditionally contradictory in other natural or synthetical materials, Ga-based liquid metals (LMs) exhibit low mechanical stiffness and flowability like a liquid, with good electrical and thermal conductivity like metal, as well as good biocompatibility and room-temperature phase transformation. These remarkable properties have paved the way for the development of novel reconfigurable or stretchable electronics and devices. Despite these outstanding properties, the easy oxidation, high surface tension, and low rheological viscosity of LMs have presented formidable challenges in high-resolution patterning. To address this challenge, various surface modifications or additives have been employed to tailor the oxidation state, viscosity, and patterning capability of LMs. One effective approach for LM patterning is breaking down LMs into microparticles known as liquid metal particles (LMPs). This facilitates LM patterning using conventional techniques such as stencil, screening, or inkjet printing. Judiciously formulated photo-curable LMP inks or the introduction of an adhesive seed layer combined with a modified lift-off process further provide the micrometer-level LM patterns. Incorporating porous and adhesive substrates in LM-based electronics allows direct interfacing with the skin for robust and long-term monitoring of physiological signals. Combined with self-healing polymers in the form of substrates or composites, LM-based electronics can provide mechanical-robust devices to heal after damage for working in harsh environments. This review provides the latest advances in LM-based composites, fabrication methods, and their novel and unique applications in stretchable or reconfigurable sensors and resulting integrated systems. It is believed that the advancements in LM-based material preparation and high-resolution techniques have opened up opportunities for customized designs of LM-based stretchable sensors, as well as multifunctional, reconfigurable, highly integrated, and even standalone systems.
Collapse
Affiliation(s)
- Jia Zhu
- School of Material and Energy, University of Electronic Science and Technology of China, Chengdu 610054, China
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, Pennsylvania 16802, USA
| | - Jiaying Li
- School of Material and Energy, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Yao Tong
- Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Science, Suzhou 215011, PR China
| | - Taiqi Hu
- School of Electrical Engineering and Automation, Jiangxi University of Science and Technology, Ganzhou 341000, P. R. China
| | - Ziqi Chen
- School of Physical Sciences, University of Science and Technology of China, Hefei 230026, PR China
| | - Yang Xiao
- School of Material and Energy, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Senhao Zhang
- Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Science, Suzhou 215011, PR China
| | - Hongbo Yang
- Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Science, Suzhou 215011, PR China
| | - Min Gao
- School of Material and Energy, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Taisong Pan
- School of Material and Energy, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Huanyu Cheng
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, Pennsylvania 16802, USA
| | - Yuan Lin
- School of Material and Energy, University of Electronic Science and Technology of China, Chengdu 610054, China
- Medico-Engineering Cooperation on Applied Medicine Research Center, University of Electronics Science and Technology of China, Chengdu 610054, China
| |
Collapse
|
12
|
Lu G, Ni E, Jiang Y, Wu W, Li H. Room-Temperature Liquid Metals for Flexible Electronic Devices. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2304147. [PMID: 37875665 DOI: 10.1002/smll.202304147] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2023] [Revised: 07/26/2023] [Indexed: 10/26/2023]
Abstract
Room-temperature gallium-based liquid metals (RT-GaLMs) have garnered significant interest recently owing to their extraordinary combination of fluidity, conductivity, stretchability, self-healing performance, and biocompatibility. They are ideal materials for the manufacture of flexible electronics. By changing the composition and oxidation of RT-GaLMs, physicochemical characteristics of the liquid metal can be adjusted, especially the regulation of rheological, wetting, and adhesion properties. This review highlights the advancements in the liquid metals used in flexible electronics. Meanwhile related characteristics of RT-GaLMs and underlying principles governing their processing and applications for flexible electronics are elucidated. Finally, the diverse applications of RT-GaLMs in self-healing circuits, flexible sensors, energy harvesting devices, and epidermal electronics, are explored. Additionally, the challenges hindering the progress of RT-GaLMs are discussed, while proposing future research directions and potential applications in this emerging field. By presenting a concise and critical analysis, this paper contributes to the advancement of RT-GaLMs as an advanced material applicable for the new generation of flexible electronics.
Collapse
Affiliation(s)
- Guixuan Lu
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, 250061, China
| | - Erli Ni
- The Institute for Advanced Studies of Wuhan University, Wuhan University, Wuhan, Hubei, 430072, China
| | - Yanyan Jiang
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, 250061, China
| | - Weikang Wu
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, 250061, China
| | - Hui Li
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, 250061, China
| |
Collapse
|
13
|
Huang Z, Guan M, Bao Z, Dong F, Cui X, Liu G. Ligand Mediation for Tunable and Oxide Suppressed Surface Gold-Decorated Liquid Metal Nanoparticles. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306652. [PMID: 37806762 DOI: 10.1002/smll.202306652] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/05/2023] [Revised: 09/25/2003] [Indexed: 10/10/2023]
Abstract
Gallium-based liquid metal systems hold vast potential in materials science. However, maximizing their possibilities is hindered by gallium's native oxide and interfacial functionalization. In this study, small-molecule ligands are adopted as surfactants to modify the surface of eutectic gallium indium (EGaIn) nanoparticles and suppress oxidation. Different p-aniline derivatives are explored. Next, the reduction of chloroanric acid (HAuCl4 ) onto these p-aniline ligand modified EGaIn nanoparticles is investigated to produce gold-decorated EGaIn nanosystems. It is found that by altering the concentrations of HAuCl4 or the p-aniline ligand, the formation of gold nanoparticles (AuNPs) on EGaIn can be manipulated. The reduction of interfacial oxidation and presence of AuNPs enhances electrical conductivity, plasmonic performance, wettability, stability, and photothermal performance of all the p-aniline derivative modified EGaIn. Of these, EGaIn nanoparticles covered with the ligand of p-aminobenzoic acid offer the most evenly distributed AuNPs decoration and perfect elimination of gallium oxides, resulting in the augmented electrical conductivity, and highest wettability suitable for patterning, enhanced aqueous stability, and favorable photothermal properties. The proof-of-concept application in photothermal therapy of cancer cells demonstrates significantly enhanced photothermal conversion performance along with good biocompatibility. Due to such unique characteristics, the developed gold-decorated EGaIn nanodroplets are expected to offer significant potential in precise medicine.
Collapse
Affiliation(s)
- Ziyang Huang
- CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, School of Medicine, The Chinese University of Hong Kong, 518172, Shenzhen, China
| | - Mingyang Guan
- CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, School of Medicine, The Chinese University of Hong Kong, 518172, Shenzhen, China
| | - Ziting Bao
- CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, School of Medicine, The Chinese University of Hong Kong, 518172, Shenzhen, China
| | - Fengyi Dong
- CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, School of Medicine, The Chinese University of Hong Kong, 518172, Shenzhen, China
| | - Xiaolin Cui
- CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, School of Medicine, The Chinese University of Hong Kong, 518172, Shenzhen, China
| | - Guozhen Liu
- CUHK(SZ)-Boyalife Joint Laboratory for Regenerative Medicine Engineering, Biomedical Engineering Programme, School of Medicine, The Chinese University of Hong Kong, Shenzhen, 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, School of Medicine, The Chinese University of Hong Kong, 518172, Shenzhen, China
| |
Collapse
|
14
|
Huang C, Guo B, Wang X, Cao Q, Zhang D, Huang J, Jiang JZ. Alkali-Ion Batteries by Carbon Encapsulation of Liquid Metal Anode. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2309732. [PMID: 37971044 DOI: 10.1002/adma.202309732] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2023] [Revised: 11/12/2023] [Indexed: 11/19/2023]
Abstract
Gallium-based metallic liquids, exhibiting high theoretical capacity, are considered a promising anode material for room-temperature liquid metal alkali-ion batteries. However, electrochemical performances, especially the cyclic stability, of the liquid metal anode for alkali-ion batteries are strongly limited because of the volume expansion and unstable solid electrolyte interphase film of liquid metal. Here, the bottleneck problem is resolved by designing carbon encapsulation on gallium-indium liquid metal nanoparticles (EGaIn@C LMNPs). A superior cycling stability (644 mAh g-1 after 800 cycles at 1.0 A g-1 ) is demonstrated for lithium-ion batteries, and excellent cycle stability (87 mAh g-1 after 2500 cycles at 1.0 A g-1 ) is achieved for sodium-ion batteries by carbon encapsulation of the liquid metal anode. Morphological and phase changes of EGaIn@C LMNPs during the electrochemical reaction process are revealed by in situ transmission electron microscopy measurements in real-time. The origin for the excellent performance is uncovered, that is the EGaIn@C core-shell structure effectively suppresses the non-uniform volume expansion of LMNPs from ≈160% to 127%, improves the electrical conductivity of the LMNPs, and exhibits superior electrochemical kinetics and a self-healing phenomenon. This work paves the way for the applications of room-temperature liquid metal anodes for high-performance alkali-ion batteries.
Collapse
Affiliation(s)
- Chenghao Huang
- International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P.R. China
| | - Baiyu Guo
- Clean Nano Energy Center, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Xiaodong Wang
- International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P.R. China
| | - Qingping Cao
- International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P.R. China
| | - Dongxian Zhang
- International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P.R. China
- State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou, 310027, P.R. China
| | - Jianyu Huang
- Clean Nano Energy Center, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Jian-Zhong Jiang
- International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P.R. China
- School of Materials Science and Engineering, Fuyao University of Science and Technology, Fuzhou, 350109, P.R. China
| |
Collapse
|
15
|
Liao J, Majidi C, Sitti M. Liquid Metal Actuators: A Comparative Analysis of Surface Tension Controlled Actuation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2300560. [PMID: 37358049 DOI: 10.1002/adma.202300560] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2023] [Revised: 06/09/2023] [Indexed: 06/27/2023]
Abstract
Liquid metals, with their unique combination of electrical and mechanical properties, offer great opportunities for actuation based on surface tension modulation. Thanks to the scaling laws of surface tension, which can be electrochemically controlled at low voltages, liquid metal actuators stand out from other soft actuators for their remarkable characteristics such as high contractile strain rates and higher work densities at smaller length scales. This review summarizes the principles of liquid metal actuators and discusses their performance as well as theoretical pathways toward higher performances. The objective is to provide a comparative analysis of the ongoing development of liquid metal actuators. The design principles of the liquid metal actuators are analyzed, including low-level elemental principles (kinematics and electrochemistry), mid-level structural principles (reversibility, integrity, and scalability), and high-level functionalities. A wide range of practical use cases of liquid metal actuators from robotic locomotion and object manipulation to logic and computation is reviewed. From an energy perspective, strategies are compared for coupling the liquid metal actuators with an energy source toward fully untethered robots. The review concludes by offering a roadmap of future research directions of liquid metal actuators.
Collapse
Affiliation(s)
- Jiahe Liao
- Physical Intelligence Department, Max Planck Institute for Intelligent Systems, Heisenbergstr. 3, 70569, Stuttgart, Germany
| | - Carmel Majidi
- Robotics Institute, Mechanical Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh, PA, 15213, USA
| | - Metin Sitti
- Physical Intelligence Department, Max Planck Institute for Intelligent Systems, Heisenbergstr. 3, 70569, Stuttgart, Germany
- Institute for Biomedical Engineering, ETH Zürich, Zürich, 8092, Switzerland
- School of Medicine, College of Engineering, Koç University, Istanbul, 34450, Turkey
| |
Collapse
|
16
|
Chen J, Tian G, Liang C, Yang D, Zhao Q, Liu Y, Qi D. Liquid metal-hydrogel composites for flexible electronics. Chem Commun (Camb) 2023; 59:14353-14369. [PMID: 37916888 DOI: 10.1039/d3cc04198k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2023]
Abstract
As an emerging functional material, liquid metal-hydrogel composites exhibit excellent biosafety, high electrical conductivity, tunable mechanical properties and good adhesion, thus providing a unique platform for a wide range of flexible electronics applications such as wearable devices, medical devices, actuators, and energy conversion devices. Through different composite methods, liquid metals can be integrated into hydrogel matrices to form multifunctional composite material systems, which further expands the application range of hydrogels. In this paper, we provide a brief overview of the two materials: hydrogels and liquid metals, and discuss the synthesis method of liquid metal-hydrogel composites, focusing on the improvement of the performance of hydrogel materials by liquid metals. In addition, we summarize the research progress of liquid metal-hydrogel composites in the field of flexible electronics, pointing out the current challenges and future prospects of this material.
Collapse
Affiliation(s)
- Jianhui Chen
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| | - Gongwei Tian
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| | - Cuiyuan Liang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| | - Dan Yang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| | - Qinyi Zhao
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| | - Yan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| | - Dianpeng Qi
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, National and Local Joint Engineering Laboratory for Synthesis, Transformation and Separation of Extreme Environmental Nutrients, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
- Key Laboratory of Science and Engineering for the Multi-modal Prevention and Control of Major Chronic Diseases, Ministry of Industry and Information Technology, Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 450046, P. R. China
| |
Collapse
|
17
|
Peng L, Su Y, Yang X, Sui G. A liquid metal/carbon nanotubes complex enabling ultra-fast polymerization of super-robust, stretchable adhesive hydrogels for highly sensitive sensor. J Colloid Interface Sci 2023; 638:313-323. [PMID: 36746050 DOI: 10.1016/j.jcis.2023.01.128] [Citation(s) in RCA: 16] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 01/03/2023] [Accepted: 01/26/2023] [Indexed: 02/05/2023]
Abstract
Carbon nanotubes (CNTs) usually served as conductive and reinforcing nanofillers for making nanocomposites have never been reported to play a role in accelerating fabrication of hydrogels. Herein, we report an important discovery that by involving CNTs and liquid metal (LM) to form a complex (LM@CNTs), multifunctional hydrogels are rapidly prepared from vinyl monomers without heating or adding any initiators and crosslinkers. Study results demonstrate that LM@CNTs not only performs as both initiator and crosslinker for synthesizing hydrogels, but also dramatically reduces the polymerization duration from 3 days to minute levels, compared with that of only LM involved in hydrogel fabrication. Specifically, the complex initiates (<60 s) and crosslinks (<8min) monomers to form the high-performance hydrogels, which significantly reduces energy consumptions. The resulting polyacrylic acid (PAA) hydrogel possesses super stretchability (∼1200 %), high tensile strength (0.96 MPa), outstanding strain sensitivity (Gauge factor = 15.40 at 300-500 % strain), and excellent adhesion to various substrate surfaces. Additionally, the injectable molding performance will benefit the mass production of the hydrogels, which exhibits great potential for applications of wearable flexible sensors. This study provides an environmentally friendly, rapid polymerization, and energy-saving strategy by effectively applying nano-fillers for viable fabrication and application of multifunctional hydrogels.
Collapse
Affiliation(s)
- Lin Peng
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Yaotian Su
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Xiaoping Yang
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Gang Sui
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China.
| |
Collapse
|
18
|
Ryu G, Park I, Kim H. Liquid Metal Micro- and Nanodroplets: Characteristics, Fabrication Techniques, and Applications. ACS OMEGA 2023; 8:15819-15830. [PMID: 37179631 PMCID: PMC10173329 DOI: 10.1021/acsomega.3c01382] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2023] [Accepted: 04/12/2023] [Indexed: 05/15/2023]
Abstract
Gallium-based liquid metal micro- and nanodroplets are being extensively explored in innumerable emerging technologies. Although many of these systems involve the interfaces of liquid metal with a continuous phase liquid (e.g., microfluidic channels and emulsions), the static or dynamic phenomena at the interface have been scarcely discussed. In this study, we begin by introducing the interfacial phenomena and characteristics observed at the interface between a liquid metal and continuous-phase liquids. Based on these results, we can employ various methods to fabricate liquid metal droplets with tunable surface properties. Finally, we discuss how these techniques can be directly applied to a wide range of state-of-the-art technologies including microfluidics, soft electronics, catalysts, and biomedicines.
Collapse
Affiliation(s)
- Gaabhin Ryu
- Department
of Mechanical Engineering, Korea Advanced
Institute of Science and Technology (KAIST), Daejeon 34141, South Korea
| | - Inkyu Park
- Department
of Mechanical Engineering, Korea Advanced
Institute of Science and Technology (KAIST), Daejeon 34141, South Korea
- Email
for I.P.:
| | - Hyoungsoo Kim
- Department
of Mechanical Engineering, Korea Advanced
Institute of Science and Technology (KAIST), Daejeon 34141, South Korea
- Email for H.K.:
| |
Collapse
|
19
|
Ma J, Krisnadi F, Vong MH, Kong M, Awartani OM, Dickey MD. Shaping a Soft Future: Patterning Liquid Metals. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2205196. [PMID: 36044678 DOI: 10.1002/adma.202205196] [Citation(s) in RCA: 33] [Impact Index Per Article: 33.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/08/2022] [Revised: 08/23/2022] [Indexed: 05/12/2023]
Abstract
This review highlights the unique techniques for patterning liquid metals containing gallium (e.g., eutectic gallium indium, EGaIn). These techniques are enabled by two unique attributes of these liquids relative to solid metals: 1) The fluidity of the metal allows it to be injected, sprayed, and generally dispensed. 2) The solid native oxide shell allows the metal to adhere to surfaces and be shaped in ways that would normally be prohibited due to surface tension. The ability to shape liquid metals into non-spherical structures such as wires, antennas, and electrodes can enable fluidic metallic conductors for stretchable electronics, soft robotics, e-skins, and wearables. The key properties of these metals with a focus on methods to pattern liquid metals into soft or stretchable devices are summari.
Collapse
Affiliation(s)
- Jinwoo Ma
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA
| | - Febby Krisnadi
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA
| | - Man Hou Vong
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA
| | - Minsik Kong
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA
| | - Omar M Awartani
- Department of Mechanical Engineering, Maroun Semaan Faculty of Engineering and Architecture, American University of Beirut, Beirut, 1107-2020, Lebanon
| | - Michael D Dickey
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA
| |
Collapse
|
20
|
Joshipura ID, Nguyen CK, Quinn C, Yang J, Morales DH, Santiso E, Daeneke T, Truong VK, Dickey MD. An atomically smooth container: Can the native oxide promote supercooling of liquid gallium? iScience 2023; 26:106493. [PMID: 37091232 PMCID: PMC10113873 DOI: 10.1016/j.isci.2023.106493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2022] [Revised: 03/05/2023] [Accepted: 03/20/2023] [Indexed: 04/09/2023] Open
Abstract
Metals tend to supercool-that is, they freeze at temperatures below their melting points. In general, supercooling is less favorable when liquids are in contact with nucleation sites such as rough surfaces. Interestingly, bulk gallium (Ga) can significantly supercool, even when it is in contact with heterogeneous surfaces that could provide nucleation sites. We hypothesized that the native oxide on Ga provides an atomically smooth interface that prevents Ga from directly contacting surfaces, and thereby promotes supercooling. Although many metals form surface oxides, Ga is a convenient metal for studying supercooling because its melting point of 29.8°C is near room temperature. Using differential scanning calorimetry (DSC), we show that freezing of Ga with the oxide occurs at a lower temperature (-15.6 ± 3.5°C) than without the oxide (6.9 ± 2.0°C when the oxide is removed by HCl). We also demonstrate that the oxide enhances supercooling via macroscopic observations of freezing. These findings explain why Ga supercools and have implications for emerging applications of Ga that rely on it staying in the liquid state.
Collapse
|
21
|
Qiao Y, Luo J, Cui T, Liu H, Tang H, Zeng Y, Liu C, Li Y, Jian J, Wu J, Tian H, Yang Y, Ren TL, Zhou J. Soft Electronics for Health Monitoring Assisted by Machine Learning. NANO-MICRO LETTERS 2023; 15:66. [PMID: 36918452 PMCID: PMC10014415 DOI: 10.1007/s40820-023-01029-1] [Citation(s) in RCA: 19] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/22/2022] [Accepted: 01/05/2023] [Indexed: 06/18/2023]
Abstract
Due to the development of the novel materials, the past two decades have witnessed the rapid advances of soft electronics. The soft electronics have huge potential in the physical sign monitoring and health care. One of the important advantages of soft electronics is forming good interface with skin, which can increase the user scale and improve the signal quality. Therefore, it is easy to build the specific dataset, which is important to improve the performance of machine learning algorithm. At the same time, with the assistance of machine learning algorithm, the soft electronics have become more and more intelligent to realize real-time analysis and diagnosis. The soft electronics and machining learning algorithms complement each other very well. It is indubitable that the soft electronics will bring us to a healthier and more intelligent world in the near future. Therefore, in this review, we will give a careful introduction about the new soft material, physiological signal detected by soft devices, and the soft devices assisted by machine learning algorithm. Some soft materials will be discussed such as two-dimensional material, carbon nanotube, nanowire, nanomesh, and hydrogel. Then, soft sensors will be discussed according to the physiological signal types (pulse, respiration, human motion, intraocular pressure, phonation, etc.). After that, the soft electronics assisted by various algorithms will be reviewed, including some classical algorithms and powerful neural network algorithms. Especially, the soft device assisted by neural network will be introduced carefully. Finally, the outlook, challenge, and conclusion of soft system powered by machine learning algorithm will be discussed.
Collapse
Affiliation(s)
- Yancong Qiao
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China.
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China.
| | - Jinan Luo
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China
| | - Tianrui Cui
- School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing, 100084, People's Republic of China
| | - Haidong Liu
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China
| | - Hao Tang
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China
| | - Yingfen Zeng
- School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing, 100084, People's Republic of China
| | - Chang Liu
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China
| | - Yuanfang Li
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China
| | - Jinming Jian
- School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing, 100084, People's Republic of China
| | - Jingzhi Wu
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China
| | - He Tian
- School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing, 100084, People's Republic of China
| | - Yi Yang
- School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing, 100084, People's Republic of China
| | - Tian-Ling Ren
- School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing, 100084, People's Republic of China.
| | - Jianhua Zhou
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, 518107, People's Republic of China.
- Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province, School of Biomedical Engineering, Sun Yat-sen University, Guangzhou, 510275, People's Republic of China.
| |
Collapse
|
22
|
Okatenko V, Loiudice A, Newton MA, Stoian DC, Blokhina A, Chen AN, Rossi K, Buonsanti R. Alloying as a Strategy to Boost the Stability of Copper Nanocatalysts during the Electrochemical CO 2 Reduction Reaction. J Am Chem Soc 2023; 145:5370-5383. [PMID: 36847799 DOI: 10.1021/jacs.2c13437] [Citation(s) in RCA: 20] [Impact Index Per Article: 20.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/01/2023]
Abstract
Copper nanocatalysts are among the most promising candidates to drive the electrochemical CO2 reduction reaction (CO2RR). However, the stability of such catalysts during operation is sub-optimal, and improving this aspect of catalyst behavior remains a challenge. Here, we synthesize well-defined and tunable CuGa nanoparticles (NPs) and demonstrate that alloying Cu with Ga considerably improves the stability of the nanocatalysts. In particular, we discover that CuGa NPs containing 17 at. % Ga preserve most of their CO2RR activity for at least 20 h while Cu NPs of the same size reconstruct and lose their CO2RR activity within 2 h. Various characterization techniques, including X-ray photoelectron spectroscopy and operando X-ray absorption spectroscopy, suggest that the addition of Ga suppresses Cu oxidation at open-circuit potential (ocp) and induces significant electronic interactions between Ga and Cu. Thus, we explain the observed stabilization of the Cu by Ga as a result of the higher oxophilicity and lower electronegativity of Ga, which reduce the propensity of Cu to oxidize at ocp and enhance the bond strength in the alloyed nanocatalysts. In addition to addressing one of the major challenges in CO2RR, this study proposes a strategy to generate NPs that are stable under a reducing reaction environment.
Collapse
Affiliation(s)
- Valery Okatenko
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| | - Anna Loiudice
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| | - Mark A Newton
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| | - Dragos C Stoian
- Swiss-Norwegian Beamlines, European Synchrotron Radiation Facility, 38000 Grenoble, France
| | - Anastasia Blokhina
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| | - Alexander N Chen
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| | - Kevin Rossi
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| | - Raffaella Buonsanti
- Laboratory of Nanochemistry for Energy Research, Institute of Chemical Sciences and Engineering, Ecole Politechnique Fédérale de Lausanne, Sion CH-1950, Switzerland
| |
Collapse
|
23
|
Corrigan N, Shi X, Boyer C. Diblock Copolymer Stabilized Liquid Metal Nanoparticles: Particle Settling Behavior and Application to 3D Printing. ACS Macro Lett 2023; 12:241-247. [PMID: 36715433 DOI: 10.1021/acsmacrolett.2c00638] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
Eutectic gallium indium (EGaIn) is a liquid metal with promising applications due to its favorable thermal and electrical conductivity, low viscosity, and metallic nature. For applications, including imaging, catalysis, and nanomedicine, stable EGaIn particles with submicron diameters are required. However, the low viscosity and high density of EGaIn have typically precluded the formation of stable submicron particles due to rapid EGaIn droplet coalescence. In this work, we show that poly(acrylic acid)-block-poly(N,N'-dimethylacrylamide) copolymers are able to effectively stabilize EGaIn nanodroplets formed upon ultrasonication, where the poly(acrylic acid) block anchors the polymer to the EGaIn surface and the poly(N,N'-dimethylacrylamide) block provides colloidal stability to the particles in solution. Although the high density of EGaIn causes rapid particle settling, the behavior is predictable, which allows the average particle size to be controlled through centrifugation. We demonstrate that stable EGaIn particles with sizes on the order of 50-100 nm and narrow particle size distributions can be easily obtained using this method and further used in photopolymer resins to prepare 3D printed EGaIn-polymer hybrid materials. The predictable sizes and high stability of these EGaIn nanoparticles should allow further applications in soft-electronics, nanomedicine, catalysis, and other nanotechnology.
Collapse
Affiliation(s)
- Nathaniel Corrigan
- Cluster for Advanced Macromolecular Design and School of Chemical Engineering, UNSW Sydney, Kensington, NSW2052, Australia.,Australian Centre for Nanomedicine, UNSW Sydney, Kensington, NSW2052, Australia
| | - Xiaobing Shi
- Cluster for Advanced Macromolecular Design and School of Chemical Engineering, UNSW Sydney, Kensington, NSW2052, Australia
| | - Cyrille Boyer
- Cluster for Advanced Macromolecular Design and School of Chemical Engineering, UNSW Sydney, Kensington, NSW2052, Australia.,Australian Centre for Nanomedicine, UNSW Sydney, Kensington, NSW2052, Australia
| |
Collapse
|
24
|
Zhao Z, Soni S, Lee T, Nijhuis CA, Xiang D. Smart Eutectic Gallium-Indium: From Properties to Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2203391. [PMID: 36036771 DOI: 10.1002/adma.202203391] [Citation(s) in RCA: 36] [Impact Index Per Article: 36.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/14/2022] [Revised: 07/30/2022] [Indexed: 05/27/2023]
Abstract
Eutectic gallium-indium (EGaIn), a liquid metal with a melting point close to or below room temperature, has attracted extensive attention in recent years due to its excellent properties such as fluidity, high conductivity, thermal conductivity, stretchability, self-healing capability, biocompatibility, and recyclability. These features of EGaIn can be adjusted by changing the experimental condition, and various composite materials with extended properties can be further obtained by mixing EGaIn with other materials. In this review, not only the are unique properties of EGaIn introduced, but also the working principles for the EGaIn-based devices are illustrated and the developments of EGaIn-related techniques are summarized. The applications of EGaIn in various fields, such as flexible electronics (sensors, antennas, electronic circuits), molecular electronics (molecular memory, opto-electronic switches, or reconfigurable junctions), energy catalysis (heat management, motors, generators, batteries), biomedical science (drug delivery, tumor therapy, bioimaging and neural interfaces) are reviewed. Finally, a critical discussion of the main challenges for the development of EGaIn-based techniques are discussed, and the potential applications in new fields are prospected.
Collapse
Affiliation(s)
- Zhibin Zhao
- Institute of Modern Optics and Center of Single Molecule Sciences, Tianjin Key Laboratory of Micro-scale Optical Information Science and Technology, Nankai University, 300350, Tianjin, P. R. China
| | - Saurabh Soni
- Department of Molecules and Materials, MESA+ Institute for Nanotechnology, Molecules Center and Center for Brain-Inspired Nano Systems, Faculty of Science and Technology, University of Twente, Enschede, 7500 AE, The Netherlands
| | - Takhee Lee
- Department of Physics and Astronomy, Institute of Applied Physics, Seoul National University, Seoul, 08826, Korea
| | - Christian A Nijhuis
- Department of Molecules and Materials, MESA+ Institute for Nanotechnology, Molecules Center and Center for Brain-Inspired Nano Systems, Faculty of Science and Technology, University of Twente, Enschede, 7500 AE, The Netherlands
| | - Dong Xiang
- Institute of Modern Optics and Center of Single Molecule Sciences, Tianjin Key Laboratory of Micro-scale Optical Information Science and Technology, Nankai University, 300350, Tianjin, P. R. China
| |
Collapse
|
25
|
Huang Z, Zou S, Liu G. Surface Modification of Liquid Metal with p-Aniline Derivatives toward Bioapplications: Biosensing as an Example. ACS APPLIED MATERIALS & INTERFACES 2022; 14:56429-56439. [PMID: 36520994 DOI: 10.1021/acsami.2c10139] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
It is a long-lasting research topic to avoid the formation of oxidation layers on gallium-based liquid metals. This study has developed a simple general method for modification of the eutectic gallium-indium (EGaIn) surface with p-aniline derivatives to introduce a monolayer of organic molecules with versatile functional groups. The binding affinity of carboxylic acid groups, amine groups, or thiol groups with EGaIn is in the order SH > NH2 > COOH. For the first time, it is evidenced that both NH2 and SH groups can coexist on the EGaIn nanoparticle surface with the binding affinities of 30 and 70%, respectively. The formation of these organic molecules on the EGaIn surface antioxidizes and thus stabilizes the EGaIn nanoparticles, while increasing the conductivity of EGaIn significantly. The resulting EGaIn nanoparticles have very good distribution in both ethanol and aqueous solutions and rich surface chemistry, making them suitable for the following attachment of biomolecules such as aptamers, antibodies, or enzymes for biomedical applications. As an example, the EGaIn surface is successfully modified with p-aminobenzoic acid followed by the attachment of an insulin aptamer, which can be used for the electrochemical detection of insulin with the lowest detectable concentration limit of 1 pM. This study reveals the modification of EGaIn nanoparticles with p-aniline derivatives with versatile functional groups to antioxidize EGaIn in a biological environment, opening a door for gallium-based liquid metals toward biomedical applications.
Collapse
Affiliation(s)
- Ziyang Huang
- School of Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China
| | - Siyi Zou
- School of Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China
| | - Guozhen Liu
- School of Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China
- Ciechanover Institute of Precision and Regenerative Medicine, The Chinese University of Hong Kong, Shenzhen 518172, China
| |
Collapse
|
26
|
Zhang J, Ma B, Chen G, Chen Y, Xu C, Hao Q, Zhao C, Liu H. Surface-Embedded Liquid Metal Electrodes with Abrasion Resistance via Direct Magnetic Printing. ACS APPLIED MATERIALS & INTERFACES 2022; 14:53405-53412. [PMID: 36382935 DOI: 10.1021/acsami.2c15282] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Gallium-based liquid metals (LMs) featuring both high conductivity and fluidity are ideal conductors for soft and stretchable electronics. However, their liquid nature is a double-edged sword in many key applications since LMs are inherently prone to mechanical damage. Although additional encapsulation is frequently used for the protection of delicate LM electrodes, it hinders the electrical interfacing with other objects for interconnection, sensing, and stimulation. Here, different from conventional patterning methods that deposit LM on or inside substrates, we for the first time report a simple strategy to create surface-embedded LM of eutectic gallium-indium (EGaIn) circuits with mechanical damage endurance. This was achieved by using direct magnetic printing to overcome the high surface tension of LM, allowing it to be passively filled into the laser-patterned microgrooves on soft substrates. We show that the surface-embedded LM circuits are resistant to mechanical erasure, washing, and peeling. We also show the applications of our surface-embedded LM electrodes in respiration monitoring and electrical stimulation of nerves. This work provides a simple and efficient way to create mechanically reliable LM microelectrodes, holding great promise for wearable and implantable bioelectronics.
Collapse
Affiliation(s)
- Jin Zhang
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Biao Ma
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Gangsheng Chen
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Yi Chen
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Chengtao Xu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Qing Hao
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Chao Zhao
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Hong Liu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| |
Collapse
|
27
|
Chen B, Wu M, Fang S, Cao Y, Pei L, Zhong H, Sun C, Lin X, Li X, Shen J, Ye M. Liquid Metal-Tailored PEDOT:PSS for Noncontact Flexible Electronics with High Spatial Resolution. ACS NANO 2022; 16:19305-19318. [PMID: 36331379 DOI: 10.1021/acsnano.2c08760] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Electric field-based noncontact flexible electronics (EF-NFEs) allow people to communicate with intelligent devices through noncontact human-machine interactions, but current EF-NFEs with limited detections (usually <20 cm) distance often lack a high spatial resolution. Here, we report a versatile material for preparing EF-NFE devices with a high spatial resolution to realize everyday human activity detection. Eutectic gallium-indium alloy (EGaIn) was introduced into poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) chains to fabricate this material, named Ga-PP. The introduction of EGaIn successfully regulates the intra- and interchain interactions of PEDOT chains and thus increases the π-electron accumulation on Ga-PP chains, which facilitates improvement of the electron storage of Ga-PP and its noncontact sensing ability. The water solubility of the obtained Ga-PP can reach approximately 15 mg/mL, comparable to that of commercial PEDOT:PSS, thus making Ga-PP suitable for various design strategies to prepare EF-NFE devices. We demonstrate that a conductive textile with a noncontact sensing ability can be achieved by immersing a commercial silk fabric into a Ga-PP solution for 5 min. With a detection distance exceeding 1 m, the prepared Ga-PP-based conductive textile (Ga-PP-CT) possesses outstanding noncontact sensing sensitivity, showing advantages in tracing the locations of signal sources and distinguishing motion states. Surprisingly, even when placed in water, Ga-PP-CT can be used to monitor the movement signals of athletes in different sporting events and output specific noncontact response signals for different sports. Intriguingly, the Ga-PP solution itself can be used to construct noncontact sensing conductive circuits, displaying the potential to be incorporated into smart electronics.
Collapse
Affiliation(s)
- Bin Chen
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
- Department of Chemistry, Fudan University, Shanghai200433, P. R. China
| | - Minying Wu
- Department of Chemistry, Fudan University, Shanghai200433, P. R. China
| | - Shenwen Fang
- College of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu610500, P. R. China
| | - Yudong Cao
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
- Department of Chemistry, Fudan University, Shanghai200433, P. R. China
| | - Liyuan Pei
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
| | - Haibin Zhong
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
| | - Chang Sun
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai200433, P. R. China
| | - Xianglong Lin
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
| | - Xuanyang Li
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
- Department of Chemistry, Fudan University, Shanghai200433, P. R. China
| | - Jianfeng Shen
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
| | - Mingxin Ye
- Institute of Special Materials and Technology, Fudan University, Shanghai200433, P. R. China
| |
Collapse
|
28
|
Shah NUH, Kanetkar S, Uppal A, Dickey MD, Wang RY, Rykaczewski K. Mechanism of Oil-in-Liquid Metal Emulsion Formation. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:13279-13287. [PMID: 36256617 DOI: 10.1021/acs.langmuir.2c02428] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Gallium-based liquid metals (LMs) combine metallic properties with the deformability of a liquid, which makes them promising candidates for a variety of applications. To broaden the range of physical and chemical properties, a variety of solid additives have been incorporated into the LMs in the literature. In contrast, only a handful of secondary fluids have been incorporated into LMs to create foams (gas-in-LM) or emulsions (liquid-in-LM). LM foams readily form through mixing of LM in air, facilitated by the formation of a native oxide on the LM. In contrast, LM breaks up into microdroplets when mixed with a secondary liquid such as silicone oil. Stable silicone oil-in-LM emulsions form only during mixing of the oil with LM foam. In this work, we investigate the fundamental mechanism underlying this process. We describe two possible microscale mechanisms for emulsion formation: (1) oil replacing air in the foam or (2) oil creating additional features in the foam. The associated foam-to-emulsion density difference demonstrates that emulsions predominantly form through the addition of oxide-covered silicone oil capsules to the LM foam. We demonstrate this through density and surface wettability measurements and multiscale imaging of LM foam mixed with varied silicone oil contents in air or nitrogen environments. We also demonstrate the presence of a continuous silicone oil film on the emulsion surface and that this oil film prevents the embrittlement of contacting aluminum.
Collapse
Affiliation(s)
- Najam Ul Hassan Shah
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona85287, United States
| | - Shreyas Kanetkar
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona85287, United States
| | - Aastha Uppal
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona85287, United States
| | - Michael D Dickey
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, North Carolina27695, United States
| | - Robert Y Wang
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona85287, United States
| | - Konrad Rykaczewski
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona85287, United States
- Julie Ann Wrigley Global Futures Laboratory, Arizona State University, Tempe, Arizona85287, United States
| |
Collapse
|
29
|
Soh EJH, Astier HPAG, Daniel D, Isaiah Chua JQ, Miserez A, Jia Z, Li L, O'Shea SJ, Bhaskaran H, Tomczak N, Nijhuis CA. AFM Manipulation of EGaIn Microdroplets to Generate Controlled, On-Demand Contacts on Molecular Self-Assembled Monolayers. ACS NANO 2022; 16:14370-14378. [PMID: 36065994 DOI: 10.1021/acsnano.2c04667] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Liquid metal droplets, such as eutectic gallium-indium (EGaIn), are important in many research areas, such as soft electronics, catalysis, and energy storage. Droplet contact on solid surfaces is typically achieved without control over the applied force and without optimizing the wetting properties in different environments (e.g., in air or liquid), resulting in poorly defined contact areas. In this work, we demonstrate the direct manipulation of EGaIn microdroplets using an atomic force microscope (AFM) to generate repeated, on-demand making and breaking of contact on self-assembled monolayers (SAMs) of alkanethiols. The nanoscale positional control and feedback loop in an AFM allow us to control the contact force at the nanonewton level and, consequently, tune the droplet contact areas at the micrometer length scale in both air and ethanol. When submerged in ethanol, the droplets are highly nonwetting, resulting in hysteresis-free contact forces and minimal adhesion; as a result, we are able to create reproducible geometric contact areas of 0.8-4.5 μm2 with the alkanethiolate SAMs in ethanol. In contrast, there is a larger hysteresis in the contact forces and larger adhesion for the same EGaIn droplet in air, which reduced the control over the contact area (4-12 μm2). We demonstrate the usefulness of the technique and of the gained insights in EGaIn contact mechanics by making well-defined molecular tunneling junctions based on alkanethiolate SAMs with small geometric contact areas of between 4 and 12 μm2 in air, 1 to 2 orders of magnitude smaller than previously achieved.
Collapse
Affiliation(s)
- Eugene Jia Hao Soh
- Department of Materials, University of Oxford, Oxford OX1 3PH, United Kingdom
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), Singapore 138634
| | | | - Dan Daniel
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), Singapore 138634
- Division of Physical Sciences and Engineering, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Jia Qing Isaiah Chua
- Biological and Biomimetic Material Laboratory, Center for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University (NTU), Singapore 637553
| | - Ali Miserez
- Biological and Biomimetic Material Laboratory, Center for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University (NTU), Singapore 637553
| | - Zian Jia
- Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, United States
| | - Ling Li
- Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, United States
| | - Sean J O'Shea
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), Singapore 138634
| | - Harish Bhaskaran
- Department of Materials, University of Oxford, Oxford OX1 3PH, United Kingdom
| | - Nikodem Tomczak
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), Singapore 138634
| | - Christian A Nijhuis
- Department of Chemistry, National University of Singapore, Singapore 117543
- Hybrid Materials for Optoelectronics Group, Department of Molecules and Materials, MESA+ Institute for Nanotechnology and Center for Brain-Inspired Nano Systems, Faculty of Science and Technology, University of Twente, 7500 AE Enschede, The Netherlands
| |
Collapse
|
30
|
Akyildiz K, Kim JH, So JH, Koo HJ. Recent progress on micro- and nanoparticles of gallium-based liquid metal: From preparation to applications. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.09.046] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/14/2022]
|
31
|
Sun X, Li H. Recent progress of Ga-based liquid metals in catalysis. RSC Adv 2022; 12:24946-24957. [PMID: 36199892 PMCID: PMC9434383 DOI: 10.1039/d2ra04795k] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/01/2022] [Accepted: 08/25/2022] [Indexed: 11/24/2022] Open
Abstract
Within the last decade, the application of gallium-based liquid metals in catalysis has received great attention from around the world. This article provides an overview concerning Ga-based liquid metals (LMs) in energy and environmental applications, such as the catalytic synthesis of ethylene by non-petroleum routes via Pd-Ga liquid catalysts, alkane dehydrogenation via Pd-Ga or Pt-Ga catalysts, CO2 hydrogenation to methanol via Ni Ga or Pd/Ga2O3 catalysts, and catalytic degradation of CO2 via EGaIn liquid metal catalysts below 500 °C, where Ga-based liquid metal catalysts exhibit high selectivity and low energy consumption. The formation of isolated metal sites in a liquid metal matrix allows the integration of several characteristics of multiphase catalysis (particularly the operational friendliness of product separation procedures) with those of homogeneous catalysis. In the end, this article sheds light on future prospects, opportunities, and challenges of liquid metal catalysis.
Collapse
Affiliation(s)
- Xi Sun
- Dalian Institute of Chemical Physic, CAS Dalian 116023 China
| | - Hui Li
- Dalian Institute of Chemical Physic, CAS Dalian 116023 China
| |
Collapse
|
32
|
Influence of microstructural alterations of liquid metal and its interfacial interactions with rubber on multifunctional properties of soft composite materials. Adv Colloid Interface Sci 2022; 308:102752. [PMID: 36007286 DOI: 10.1016/j.cis.2022.102752] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/30/2022] [Revised: 08/08/2022] [Accepted: 08/10/2022] [Indexed: 11/23/2022]
Abstract
Liquid metal (LM)-based polymer composites are currently new breakthrough and emerging classes of soft multifunctional materials (SMMs) having immense transformative potential for soft technological applications. Currently, room-temperature LMs, mostly eutectic gallium‑indium and Galinstan alloys are used to integrate with soft polymer due to their outstanding properties such as high conductivity, fluidity, low adhesion, high surface tension, low cytotoxicity, etc. The microstructural alterations and interfacial interactions controlling the efficient integration of LMs with rubber are the most critical aspects for successful implementation of multifunctionality in the resulting material. In this review article, a fundamental understanding of microstructural alterations of LMs to the formation of well-defined percolating networks inside an insulating rubber matrix has been established by exploiting several existing theoretical and experimental studies. Furthermore, effects of the chemical modifications of an LM surface and its interfacial interactions on the compatibility between solid rubber and fluid filler phase have been discussed. The presence of thin oxide layer on the LM surface and the effects and challenges it poses to the adequate functionalization of these materials have been discussed. Plausible applications of SMMs in different soft matter technologies, like soft robotics, flexible electronics, soft actuators, sensors, etc. have been provided. Finally, the current technical challenges and further prospective to the development of SMMs using non‑silicone rubbers have been critically discussed. This review is anticipated to infuse a new impetus to the associated research communities for the development of next generation SMMs.
Collapse
|
33
|
Lim T, Ring TA, Zhang H. Chemical Analysis of the Gallium Surface in a Physiologic Buffer. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:6817-6825. [PMID: 35620858 DOI: 10.1021/acs.langmuir.1c03281] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Gallium and its alloys have been regarded as one of the promising materials for flexible bioelectronics due to their liquid-like mechanical properties, excellent electrical property, and low toxicity. Although many studies have fabricated bioelectronics from gallium-based liquid metals, gallium surface chemistry in physiologic conditions is rarely investigated. Here, we investigated the chemical change of the gallium surface in a physiologic buffer at 37 °C over 45 days. The gallium ion concentration and pH measurement indicated that the oxidation and corrosion progressed more rapidly in the physiological buffer than in air. Also, the release of gallium ions and protons followed a square root of time growth. Various spectroscopic techniques were used to measure the chemical composition change on the gallium surface. The FT-IR study indicated that the GaOOH-rich gallium surface produced Ga3+ and OH- ions. The XPS study indicated the oxide layer formation within 5 days, and then the contamination layer was deposited over time, which includes different ions and organic materials derived from the physiologic buffer. This study provides a detailed chemical analysis of the gallium surface in a physiological buffer. These fundamental studies would be a cornerstone for understanding the complex interaction between the gallium surface and the biological environment.
Collapse
Affiliation(s)
- Taehwan Lim
- Department of Chemical Engineering, University of Utah, Salt Lake City, Utah 84112, United States
- Advanced Textile R&D Department, Korea Institute of Industrial Technology (KITECH), Ansan, Gyeonggi-do 15588, South Korea
| | - Terry A Ring
- Department of Chemical Engineering, University of Utah, Salt Lake City, Utah 84112, United States
| | - Huanan Zhang
- Department of Chemical Engineering, University of Utah, Salt Lake City, Utah 84112, United States
| |
Collapse
|
34
|
Huang X, Xu T, Shen A, Davis TP, Qiao R, Tang SY. Engineering Polymers via Understanding the Effect of Anchoring Groups for Highly Stable Liquid Metal Nanoparticles. ACS APPLIED NANO MATERIALS 2022; 5:5959-5971. [PMID: 35655929 PMCID: PMC9150068 DOI: 10.1021/acsanm.1c04138] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/01/2021] [Accepted: 01/31/2022] [Indexed: 05/03/2023]
Abstract
Liquid metal nanoparticles (LMNPs) have recently attracted much attention as soft functional materials for various biorelated applications. Despite the fact that several reports demonstrate highly stable LMNPs in aqueous solutions or organic solvents, it is still challenging to stabilize LMNPs in biological media with complex ionic environments. LMNPs grafted with functional polymers (polymers/LMNPs) have been fabricated for maintaining their colloidal and chemical stability; however, to the best of our knowledge, no related work has been conducted to systematically investigate the effect of anchoring groups on the stability of LMNPs. Herein, various anchoring groups, including phosphonic acids, trithiolcarbonates, thiols, and carboxylic acids, are incorporated into brush polymers via reversible addition-fragmentation chain transfer (RAFT) polymerization to graft LMNPs. Both the colloidal and chemical stability of such polymer/LMNP systems are then investigated in various biological media. Moreover, the influence of multidentate ligands is also investigated by incorporating different numbers of carboxylic or phosphonic acid into the brush polymers. We discover that increasing the number of anchoring groups enhances the colloidal stability of LMNPs, while polymers bearing phosphonic acids provide the optimum chemical stability for LMNPs due to surface passivation. Thus, polymers bearing multidentate phosphonic acids are desirable to decorate LMNPs to meet complex environments for biological studies.
Collapse
Affiliation(s)
- Xumin Huang
- Australian
Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072, Australia
| | - Tianhong Xu
- Australian
Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072, Australia
| | - Ao Shen
- Australian
Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072, Australia
| | - Thomas P. Davis
- Australian
Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072, Australia
| | - Ruirui Qiao
- Australian
Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072, Australia
| | - Shi-Yang Tang
- Department
of Electronic, Electrical and Systems Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT, U.K.
| |
Collapse
|
35
|
Du J, Wang X, Li Y, Min Q. How an Oxide Layer Influences the Impact Dynamics of Galinstan Droplets on a Superhydrophobic Surface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:5645-5655. [PMID: 35482446 DOI: 10.1021/acs.langmuir.2c00225] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
When exposed to air, gallium-based alloys rapidly form a thin oxide layer with viscoelasticity and high adhesion. Although previous work demonstrated that an oxide layer inhibits liquid metal droplet rebound, there is still a lack of a quantitative study to elaborate how an oxide layer affects the impact dynamics. To address this issue, we experimentally investigate Galinstan droplet impingement on a superhydrophobic CuO nanoblade surface and physically explain the difference in the dynamic characteristics of oxidized and unoxidized droplets. Experimental results show that the effect of an oxide layer becomes prominent during the retraction phase. The high adhesion significantly suppresses retraction and rebound, while the elastic response prevents a droplet from sufficiently stretching and maintains the stability of the morphology. More importantly, we systematically and quantitatively explore the influence of an oxide layer on several critical impact parameters, which contributes to a comprehensive understanding of the impact dynamics of liquid metal droplets. It is indicated that an oxide layer has little effect on the maximum spreading factor and spreading time, whereas it causes a 45% reduction of the restitution coefficient and a 36% increase in contact time. Notably, the scaling laws that describe the critical impact parameters of unoxidized droplets show good agreement with the ones known from ordinary Newtonian fluids.
Collapse
Affiliation(s)
- Jiayu Du
- Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China
| | - Xiong Wang
- Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China
| | - Yanzhi Li
- Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China
| | - Qi Min
- Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China
| |
Collapse
|
36
|
Duan M, Zhu X, Shan X, Wang H, Chen S, Liu J. Responsive Liquid Metal Droplets: From Bulk to Nano. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:1289. [PMID: 35457997 PMCID: PMC9026530 DOI: 10.3390/nano12081289] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 03/25/2022] [Accepted: 03/29/2022] [Indexed: 02/06/2023]
Abstract
Droplets exist widely in nature and play an extremely important role in a broad variety of industrial processes. Typical droplets, including water and oil droplets, have received extensive attention and research, however their single properties still cannot meet diverse needs. Fortunately, liquid metal droplets emerging in recent years possess outstanding properties, including large surface tension, excellent electrical and thermal conductivity, convenient chemical processing, easy transition between liquid and solid phase state, and large-scale deformability, etc. More interestingly, liquid metal droplets with unique features can respond to external factors, including the electronic field, magnetic field, acoustic field, chemical field, temperature, and light, exhibiting extraordinary intelligent response characteristics. Their development over the past decade has brought substantial breakthroughs and progress. To better promote the advancement of this field, the present article is devoted to systematically summarizing and analyzing the recent fundamental progress of responsive liquid metal droplets, not only involving droplet characteristics and preparation methods, but also focusing on their diverse response behaviors and mechanisms. On this basis, the challenges and prospects related to the following development of liquid metal droplets are also proposed. In the future, responsive liquid metal droplets with a rapid development trend are expected to play a key role in soft robots, biomedicine, smart matter, and a variety of other fields.
Collapse
Affiliation(s)
- Minghui Duan
- Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China; (M.D.); (X.Z.); (X.S.); (H.W.)
| | - Xiyu Zhu
- Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China; (M.D.); (X.Z.); (X.S.); (H.W.)
| | - Xiaohui Shan
- Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China; (M.D.); (X.Z.); (X.S.); (H.W.)
| | - Hongzhang Wang
- Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China; (M.D.); (X.Z.); (X.S.); (H.W.)
| | - Sen Chen
- Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China; (M.D.); (X.Z.); (X.S.); (H.W.)
| | - Jing Liu
- Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China; (M.D.); (X.Z.); (X.S.); (H.W.)
- Beijing Key Laboratory of Cryo-Biomedical Engineering, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China
| |
Collapse
|
37
|
Xu D, Cao J, Liu F, Zou S, Lei W, Wu Y, Liu Y, Shang J, Li RW. Liquid Metal Based Nano-Composites for Printable Stretchable Electronics. SENSORS (BASEL, SWITZERLAND) 2022; 22:2516. [PMID: 35408131 PMCID: PMC9002646 DOI: 10.3390/s22072516] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/23/2022] [Revised: 03/16/2022] [Accepted: 03/23/2022] [Indexed: 05/25/2023]
Abstract
Liquid metal (LM) has attracted prominent attention for stretchable and elastic electronics applications due to its exceptional fluidity and conductivity at room temperature. Despite progress in this field, a great disparity remains between material fabrication and practical applications on account of the high surface tension and unavoidable oxidation of LM. Here, the composition and nanolization of liquid metal can be envisioned as effective solutions to the processibility-performance dilemma caused by high surface tension. This review aims to summarize the strategies for the fabrication, processing, and application of LM-based nano-composites. The intrinsic mechanism and superiority of the composition method will further extend the capabilities of printable ink. Recent applications of LM-based nano-composites in printing are also provided to guide the large-scale production of stretchable electronics.
Collapse
Affiliation(s)
- Dan Xu
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Jinwei Cao
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- New Materials Institute, Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham Ningbo, Ningbo 315100, China
| | - Fei Liu
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Shengbo Zou
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Wenjuan Lei
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Yuanzhao Wu
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Yiwei Liu
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Jie Shang
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Run-Wei Li
- CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; (D.X.); (J.C.); (F.L.); (S.Z.); (W.L.); (Y.W.); (Y.L.)
- Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| |
Collapse
|
38
|
Kim S, Lee J. Indentation and Temperature Response of Liquid Metal/Hydrogel Composites. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.02.059] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
39
|
Park Y, Yun I, Chung WG, Park W, Lee DH, Park J. High-Resolution 3D Printing for Electronics. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2104623. [PMID: 35038249 PMCID: PMC8922115 DOI: 10.1002/advs.202104623] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/17/2021] [Revised: 12/04/2021] [Indexed: 05/17/2023]
Abstract
The ability to form arbitrary 3D structures provides the next level of complexity and a greater degree of freedom in the design of electronic devices. Since recent progress in electronics has expanded their applicability in various fields in which structural conformability and dynamic configuration are required, high-resolution 3D printing technologies can offer significant potential for freeform electronics. Here, the recent progress in novel 3D printing methods for freeform electronics is reviewed, with providing a comprehensive study on 3D-printable functional materials and processes for various device components. The latest advances in 3D-printed electronics are also reviewed to explain representative device components, including interconnects, batteries, antennas, and sensors. Furthermore, the key challenges and prospects for next-generation printed electronics are considered, and the future directions are explored based on research that has emerged recently.
Collapse
Affiliation(s)
- Young‐Geun Park
- Department of Materials Science and EngineeringYonsei UniversitySeoul03722Republic of Korea
- Center for NanomedicineInstitute for Basic Science (IBS)Seoul03722Republic of Korea
- Graduate Program of Nano Biomedical Engineering (NanoBME)Advanced Science InstituteYonsei UniversitySeoul03722Republic of Korea
| | - Insik Yun
- Department of Materials Science and EngineeringYonsei UniversitySeoul03722Republic of Korea
- Center for NanomedicineInstitute for Basic Science (IBS)Seoul03722Republic of Korea
- Graduate Program of Nano Biomedical Engineering (NanoBME)Advanced Science InstituteYonsei UniversitySeoul03722Republic of Korea
| | - Won Gi Chung
- Department of Materials Science and EngineeringYonsei UniversitySeoul03722Republic of Korea
- Center for NanomedicineInstitute for Basic Science (IBS)Seoul03722Republic of Korea
- Graduate Program of Nano Biomedical Engineering (NanoBME)Advanced Science InstituteYonsei UniversitySeoul03722Republic of Korea
| | - Wonjung Park
- Department of Materials Science and EngineeringYonsei UniversitySeoul03722Republic of Korea
- Center for NanomedicineInstitute for Basic Science (IBS)Seoul03722Republic of Korea
- Graduate Program of Nano Biomedical Engineering (NanoBME)Advanced Science InstituteYonsei UniversitySeoul03722Republic of Korea
| | - Dong Ha Lee
- Department of Materials Science and EngineeringYonsei UniversitySeoul03722Republic of Korea
- Center for NanomedicineInstitute for Basic Science (IBS)Seoul03722Republic of Korea
- Graduate Program of Nano Biomedical Engineering (NanoBME)Advanced Science InstituteYonsei UniversitySeoul03722Republic of Korea
| | - Jang‐Ung Park
- Department of Materials Science and EngineeringYonsei UniversitySeoul03722Republic of Korea
- Center for NanomedicineInstitute for Basic Science (IBS)Seoul03722Republic of Korea
- Graduate Program of Nano Biomedical Engineering (NanoBME)Advanced Science InstituteYonsei UniversitySeoul03722Republic of Korea
| |
Collapse
|
40
|
Aukarasereenont P, Goff A, Nguyen CK, McConville CF, Elbourne A, Zavabeti A, Daeneke T. Liquid metals: an ideal platform for the synthesis of two-dimensional materials. Chem Soc Rev 2022; 51:1253-1276. [PMID: 35107468 DOI: 10.1039/d1cs01166a] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
The surfaces of liquid metals can serve as a platform to synthesise two-dimensional materials. By exploiting the self-limiting Cabrera-Mott oxidation reaction that takes place at the surface of liquid metals exposed to ambient air, an ultrathin oxide layer can be synthesised and isolated. Several synthesis approaches based on this phenomenon have been developed in recent years, resulting in a diverse family of functional 2D materials that covers a significant fraction of the periodic table. These straightforward and inherently scalable techniques may enable the fabrication of novel devices and thus harbour significant application potential. This review provides a brief introduction to liquid metals and their alloys, followed by detailed guidance on each developed synthesis technique, post-growth processing methods, integration processes, as well as potential applications of the developed materials.
Collapse
Affiliation(s)
| | - Abigail Goff
- School of Engineering, RMIT University, Melbourne, VIC, 3001, Australia.
| | - Chung Kim Nguyen
- School of Engineering, RMIT University, Melbourne, VIC, 3001, Australia.
| | - Chris F McConville
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia
| | - Aaron Elbourne
- School of Science, RMIT University, Melbourne, VIC, 3001, Australia
| | - Ali Zavabeti
- Department of Chemical Engineering, The University of Melbourne, Parkville, VIC, 3010, Australia
| | - Torben Daeneke
- School of Engineering, RMIT University, Melbourne, VIC, 3001, Australia.
| |
Collapse
|
41
|
Allioux FM, Ghasemian MB, Xie W, O'Mullane AP, Daeneke T, Dickey MD, Kalantar-Zadeh K. Applications of liquid metals in nanotechnology. NANOSCALE HORIZONS 2022; 7:141-167. [PMID: 34982812 DOI: 10.1039/d1nh00594d] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Post-transition liquid metals (LMs) offer new opportunities for accessing exciting dynamics for nanomaterials. As entities with free electrons and ions as well as fluidity, LM-based nanomaterials are fundamentally different from their solid counterparts. The low melting points of most post-transition metals (less than 330 °C) allow for the formation of nanodroplets from bulk metal melts under mild mechanical and chemical conditions. At the nanoscale, these liquid state nanodroplets simultaneously offer high electrical and thermal conductivities, tunable reactivities and useful physicochemical properties. They also offer specific alloying and dealloying conditions for the formation of multi-elemental liquid based nanoalloys or the synthesis of engineered solid nanomaterials. To date, while only a few nanosized LM materials have been investigated, extraordinary properties have been observed for such systems. Multi-elemental nanoalloys have shown controllable homogeneous or heterogeneous core and surface compositions with interfacial ordering at the nanoscale. The interactions and synergies of nanosized LMs with polymeric, inorganic and bio-materials have also resulted in new compounds. This review highlights recent progress and future directions for the synthesis and applications of post-transition LMs and their alloys. The review presents the unique properties of these LM nanodroplets for developing functional materials for electronics, sensors, catalysts, energy systems, and nanomedicine and biomedical applications, as well as other functional systems engineered at the nanoscale.
Collapse
Affiliation(s)
- Francois-Marie Allioux
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney, NSW 2052, Australia.
| | - Mohammad B Ghasemian
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney, NSW 2052, Australia.
| | - Wanjie Xie
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney, NSW 2052, Australia.
| | - Anthony P O'Mullane
- School of Chemistry and Physics, Queensland University of Technology (QUT), Brisbane, QLD 4001, Australia
| | - Torben Daeneke
- School of Engineering, RMIT University, Melbourne, Victoria, 3001, Australia
| | - Michael D Dickey
- Department of Chemical and Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, NC, 27695, USA
| | - Kourosh Kalantar-Zadeh
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney, NSW 2052, Australia.
| |
Collapse
|
42
|
Castilla-Amorós L, Chien TCC, Pankhurst JR, Buonsanti R. Modulating the Reactivity of Liquid Ga Nanoparticle Inks by Modifying Their Surface Chemistry. J Am Chem Soc 2022; 144:1993-2001. [DOI: 10.1021/jacs.1c12880] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Affiliation(s)
- Laia Castilla-Amorós
- Laboratory of Nanochemistry for Energy (LNCE), Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne, CH-1950 Sion, Switzerland
| | - Tzu-Chin Chang Chien
- Laboratory of Nanochemistry for Energy (LNCE), Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne, CH-1950 Sion, Switzerland
| | - James R. Pankhurst
- Laboratory of Nanochemistry for Energy (LNCE), Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne, CH-1950 Sion, Switzerland
| | - Raffaella Buonsanti
- Laboratory of Nanochemistry for Energy (LNCE), Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne, CH-1950 Sion, Switzerland
| |
Collapse
|
43
|
Ernst OC, Böttcher K, Fischer D, Uebel D, Teubner T, Boeck T. Morphogenesis of Liquid Indium Microdroplets on Solid Molybdenum Surfaces during Solidification at Normal Pressure and under Vacuum Conditions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:762-768. [PMID: 34985893 DOI: 10.1021/acs.langmuir.1c02744] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Electrical and optical applications based on micro- and nanoparticles have specific demands on their interfacial properties. These properties are strongly related to atmospheric conditions to which the particles were exposed during their formation. In this study, metallic In microparticles are synthesized by solidification of In droplets on an amorphous Mo substrate at normal pressure and under vacuum conditions. The influence of ambient pressure on the interface and surface shape is investigated. While solidification at atmospheric pressure leads to collapsed particles with undisturbed contact to the substrate, low pressures result in smooth spherical particles but with cavities inside. Numerical simulations with COMSOL Multiphysics reveal different temperature profiles and heat flux in particles during solidification for both cases. This indicates different starting conditions of the solidification, which leads to the described phenomenon eventually. The investigation of the varying process conditions on the particle shape in combination with the calculated and measured temperature curves over time gives valuable insights into new approaches to synthesize micro- and nanoparticles with defined interfacial properties. Both ambient pressure and cooling rate provide well-controllable and reliable parameters for the realization of different interfacial shapes.
Collapse
Affiliation(s)
- Owen C Ernst
- Leibniz-Institut für Kristallzüchtung (IKZ), Max-Born-Straße 2, 12489 Berlin, Germany
| | - Klaus Böttcher
- Leibniz-Institut für Kristallzüchtung (IKZ), Max-Born-Straße 2, 12489 Berlin, Germany
| | - Daniel Fischer
- Bundesanstalt für Materialforschung und-prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany
| | - David Uebel
- Leibniz-Institut für Kristallzüchtung (IKZ), Max-Born-Straße 2, 12489 Berlin, Germany
| | - Thomas Teubner
- Leibniz-Institut für Kristallzüchtung (IKZ), Max-Born-Straße 2, 12489 Berlin, Germany
| | - Torsten Boeck
- Leibniz-Institut für Kristallzüchtung (IKZ), Max-Born-Straße 2, 12489 Berlin, Germany
| |
Collapse
|
44
|
Kim JH, Park YJ, Kim S, So JH, Koo HJ. Effect of Surrounding Solvents on Interfacial Behavior of Gallium-Based Liquid Metal Droplets. MATERIALS 2022; 15:ma15030706. [PMID: 35160654 PMCID: PMC8837161 DOI: 10.3390/ma15030706] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 01/14/2022] [Accepted: 01/14/2022] [Indexed: 02/06/2023]
Abstract
Gallium-based liquid metal (GaLM) alloys have been extensively used in applications ranging from electronics to drug delivery systems. To broaden the understanding and applications of GaLMs, this paper discusses the interfacial behavior of eutectic gallium-indium liquid metal (EGaIn) droplets in various solvents. No significant difference in contact angles of EGaIn is observed regardless of the solvent types. However, the presence or absence of a conical tip on EGaIn droplets after dispensing could indirectly support that the interfacial energy of EGaIn is relatively low in non-polar solvents. Furthermore, in the impact experiments, the EGaIn droplet bounces off in the polar solvents of water and dimethyl sulfoxide (DMSO), whereas it spreads and adheres to the substrate in the non-polar solvents of hexane and benzene. Based on the dimensionless We number, it can be stated that the different impact behavior depending on the solvent types is closely related to the interfacial energy of EGaIn in each solvent. Finally, the contact angles and shapes of EGaIn droplets in aqueous buffer solutions with different pH values (4, 7, and 10) are compared. In the pH 10 buffer solution, the EGaIn droplet forms a spherical shape without the conical tip, representing the high surface energy. This is associated with the dissolution of the “interfacial energy-reducing” surface layer on EGaIn, which is supported by the enhanced concentration of gallium ion released from EGaIn in the buffer solution.
Collapse
Affiliation(s)
- Ji-Hye Kim
- Department of New Energy Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea;
| | - Ye-Jin Park
- Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea;
| | - Sooyoung Kim
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA;
| | - Ju-Hee So
- Material and Component Convergence R&D Department, Korea Institute of Industrial Technology, Ansan 15588, Korea
- Correspondence: (J.-H.S.); (H.-J.K.)
| | - Hyung-Jun Koo
- Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea;
- Correspondence: (J.-H.S.); (H.-J.K.)
| |
Collapse
|
45
|
Jie Z, Mu W, Fu B, He G, Ding S, Li Y, Jia Z. Synthesis, mechanism and characterization of Urchin-like Ga2O3 microspheres. CrystEngComm 2022. [DOI: 10.1039/d2ce00055e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
An effective method without catalyst and template was developed to synthesize a novel micro-/nanostructures of gallium oxide (Ga2O3) for the first time. The urchin-like microspheres with uniformly distributed nanowires were...
Collapse
|
46
|
Sequential Oxidation Strategy for the Fabrication of Liquid Metal Electrothermal Thin Film with Desired Printing and Functional Property. MICROMACHINES 2021; 12:mi12121539. [PMID: 34945389 PMCID: PMC8709429 DOI: 10.3390/mi12121539] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Revised: 12/02/2021] [Accepted: 12/06/2021] [Indexed: 11/17/2022]
Abstract
Room temperature liquid metal (LM) showcases a great promise in the fields of flexible functional thin film due to its favorable characteristics of flexibility, inherent conductivity, and printability. Current fabrication strategies of liquid metal film are substrate structure specific and sustain from unanticipated smearing effects. Herein, this paper reported a facile fabrication of liquid metal composite film via sequentially regulating oxidation to change the adhesion characteristics, targeting the ability of electrical connection and electrothermal conversion. The composite film was then made of the electrically resistive layer (oxidizing liquid metal) and the insulating Polyimide film (PI film) substrate, which has the advantages of electrical insulation and ultra-wide temperature working range, and its thickness is only 50 μm. The electrical resistance of composite film can maintain constant for 6 h and could work normally. Additionally, the heating film exhibited excellent thermal switching characteristics that can reach temperature equilibrium within 100 s, and recovery to ambient temperature within 50 s. The maximum working temperature of the as-prepared film is 115 °C, which is consistent with the result of the theoretical calculation, demonstrating a good electrothermal conversion capability. Finally, the heating application under extreme low temperature (−196 °C) was achieved. This conceptual study showed the promising value of the prototype strategy to the specific application areas such as the field of smart homes, flexible electronics, wearable thermal management, and high-performance heating systems.
Collapse
|
47
|
Liu H, Ouyang D, Wang J, Lei C, Shi W, Gilliam T, Liu J, Li Y, Chopra N. Chemical Vapor Deposition Mechanism of Graphene-Encapsulated Au Nanoparticle Heterostructures and Their Plasmonics. ACS APPLIED MATERIALS & INTERFACES 2021; 13:58134-58143. [PMID: 34807555 DOI: 10.1021/acsami.1c16608] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Direct encapsulation of graphene shells on noble metal nanoparticles via chemical vapor deposition (CVD) has been recently reported as a unique way to design and fabricate new plasmonic heterostructures. But currently, the fundamental nature of the growth mechanism of graphene layers on metal nanostructures is still unknown. Herein, we report a systematic investigation on the CVD growth of graphene-encapsulated Au nanoparticles (Au@G) by combining an experimental parameter study and theoretical modeling. We studied the effect of growth temperature, duration, hydrocarbon precursor concentration, and extent of reducing (H2) environment on the morphology of the products. In addition, the influence of plasma oxidation conditions for the surface oxidation of gold nanoparticles on the graphene shell growth is evaluated in combination with thermodynamic calculations. We find that these parameters critically aid in the evolution of graphene shells around gold nanoparticles and allow for controlling shell thickness, graphene shell quality and morphology, and hybrid nanoparticle diameter. An optimized condition including the growth temperature of ∼675 °C, duration of 30 min, and xylene feed rate of ∼10 mL/h with 10% H2/Ar carrier gas was finally obtained for the best morphology evolution. We further performed finite-element analysis (FEA) simulations to understand the equivalent von Mises stress distribution and discrete dipolar approximation (DDA) calculation to reveal the optical properties of such new core-shell heterostructures. This study brings new insight to the nature of CVD mechanism of Au@G and might help guiding their controlled growth and future design and application in plasmonic applications.
Collapse
Affiliation(s)
- Heguang Liu
- School of Materials Science and Engineering, Xi'an University of Technology, Xi'an, Shaanxi 710048, China
- State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China
| | - Decai Ouyang
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
| | - Jing Wang
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
| | - Chao Lei
- School of Materials Science and Engineering, Xi'an University of Technology, Xi'an, Shaanxi 710048, China
| | - Wenwu Shi
- Department of Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, Alabama 35401, United States
| | - Todd Gilliam
- Department of Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, Alabama 35401, United States
| | - Jianxi Liu
- State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China
| | - Yuan Li
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
| | - Nitin Chopra
- Department of Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, Alabama 35401, United States
| |
Collapse
|
48
|
Wang Y, Mayyas M, Yang J, Ghasemian MB, Tang J, Mousavi M, Han J, Ahmed M, Baharfar M, Mao G, Yao Y, Esrafilzadeh D, Cortie D, Kalantar-Zadeh K. Liquid-Metal-Assisted Deposition and Patterning of Molybdenum Dioxide at Low Temperature. ACS APPLIED MATERIALS & INTERFACES 2021; 13:53181-53193. [PMID: 34723471 DOI: 10.1021/acsami.1c15367] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Molybdenum dioxide (MoO2), considering its near-metallic conductivity and surface plasmonic properties, is a great material for electronics, energy storage devices and biosensing. Yet to this day, room-temperature synthesis of large area MoO2, which allows deposition on arbitrary substrates, has remained a challenge. Due to their reactive interfaces and specific solubility conditions, gallium-based liquid metal alloys offer unique opportunities for synthesizing materials that can meet these challenges. Herein, a substrate-independent liquid metal-based method for the room temperature deposition and patterning of MoO2 is presented. By introducing a molybdate precursor to the surrounding of a eutectic gallium-indium alloy droplet, a uniform layer of hydrated molybdenum oxide (H2MoO3) is formed at the interface. This layer is then exfoliated and transferred onto a desired substrate. Utilizing the transferred H2MoO3 layer, a laser-writing technique is developed which selectively transforms this H2MoO3 into crystalline MoO2 and produces electrically conductive MoO2 patterns at room temperature. The electrical conductivity and plasmonic properties of the MoO2 are analyzed and demonstrated. The presented metal oxide room-temperature deposition and patterning method can find many applications in optoelectronics, sensing, and energy industries.
Collapse
Affiliation(s)
- Yifang Wang
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Mohannad Mayyas
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Jiong Yang
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Mohammad B Ghasemian
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Jianbo Tang
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Maedehsadat Mousavi
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Jialuo Han
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Mostak Ahmed
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Mahroo Baharfar
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Guangzhao Mao
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Yin Yao
- Electron Microscope Unit, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - Dorna Esrafilzadeh
- Graduate School of Biomedical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| | - David Cortie
- Australian Institute for Innovative Materials, Institute for Superconducting and Electronic Materials, University of Wollongong, Innovation Campus Squires Way, North Wollongong, New South Wales 2522, Australia
| | - Kourosh Kalantar-Zadeh
- School of Chemical Engineering, University of New South Wales (UNSW), Sydney Campus, Sydney, New South Wales 2052, Australia
| |
Collapse
|
49
|
Kim J, Jeong J, Hyun Y, Chung SK, Lee J. Electrostatic Stabilization of Nano Liquid Metals in Doped Nonpolar Liquids. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2104143. [PMID: 34623028 DOI: 10.1002/smll.202104143] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2021] [Revised: 09/08/2021] [Indexed: 06/13/2023]
Abstract
Liquid metals and alloys are attracting renewed attention owing to their potential for application in various advanced technologies. Eutectic gallium-indium (EGaIn) has been focused on in particular because of its integrated advantages of high conductivity, low melting point, and low toxicity. In this study, the colloidal behavior of nano-dispersed EGaIn in nonpolar oils is investigated. Although the nonpolar oil continuous phase is commonly considered to be free of electric charges, electrostatic repulsion appears to be crucial in the colloidal stabilization of the nano-dispersed EGaIn phases, the modulation of which is possible by doping the oil phases with different types of oil-soluble surfactants. The qualitative correlation between the observed colloidal stabilities and the "zero field" particle mobilities inferred from the field-dependent electrophoretic mobilities indicates that the electric charging of EGaIn particles in surfactant-doped nonpolar oils is a static phenomenon that is maintained in equilibrium, rather than a solely field-induced process. A systematic investigation of the charging properties of these unique biphasic particles, consisting of the liquid Ga-In bulk and the solid Ga2 O3 surface that formed spontaneously, reveals the complicated system-dependent nature of the charging mechanisms mediated by ionic and nonionic surfactants in nonpolar media.
Collapse
Affiliation(s)
- Jieun Kim
- Department of Chemical Engineering, Myongji University, 116 Myongji-ro, Cheoin-gu, Yongin, Gyeonggi-do, 17058, Korea
| | - Jinwon Jeong
- Department of Mechanical Engineering, Myongji University, 116 Myongji-ro, Cheoin-gu, Yongin, Gyeonggi-do, 17058, Korea
| | - Youngbin Hyun
- Department of Mechanical Engineering, Myongji University, 116 Myongji-ro, Cheoin-gu, Yongin, Gyeonggi-do, 17058, Korea
| | - Sang Kug Chung
- Department of Mechanical Engineering, Myongji University, 116 Myongji-ro, Cheoin-gu, Yongin, Gyeonggi-do, 17058, Korea
| | - Joohyung Lee
- Department of Chemical Engineering, Myongji University, 116 Myongji-ro, Cheoin-gu, Yongin, Gyeonggi-do, 17058, Korea
| |
Collapse
|
50
|
Park Y, Lee G, Jang J, Yun SM, Kim E, Park J. Liquid Metal-Based Soft Electronics for Wearable Healthcare. Adv Healthc Mater 2021; 10:e2002280. [PMID: 33724723 DOI: 10.1002/adhm.202002280] [Citation(s) in RCA: 55] [Impact Index Per Article: 18.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2020] [Revised: 02/24/2021] [Indexed: 12/19/2022]
Abstract
Wearable healthcare devices have garnered substantial interest for the realization of personal health management by monitoring the physiological parameters of individuals. Attaining the integrity between the devices and the biological interfaces is one of the greatest challenges to achieving high-quality body information in dynamic conditions. Liquid metals, which exist in the liquid phase at room temperatures, are advanced intensively as conductors for deformable devices because of their excellent stretchability and self-healing ability. The unique surface chemistry of liquid metals allows the development of various sensors and devices in wearable form. Also, the biocompatibility of liquid metals, which is verified through numerous biomedical applications, holds immense potential in uses on the surface and inside of a living body. Here, the recent progress of liquid metal-based wearable electronic devices for healthcare with respect to the featured properties and the processing technologies is discussed. Representative examples of applications such as biosensors, neural interfaces, and a soft interconnection for devices are reviewed. The current challenges and prospects for further development are also discussed, and the future directions of advances in the latest research are explored.
Collapse
Affiliation(s)
- Young‐Geun Park
- KIURI Institute Yonsei University Seoul 03722 Republic of Korea
- Nano Science Technology Institute Department of Materials Science and Engineering Yonsei University Seoul 03722 Republic of Korea
| | - Ga‐Yeon Lee
- KIURI Institute Yonsei University Seoul 03722 Republic of Korea
| | - Jiuk Jang
- Nano Science Technology Institute Department of Materials Science and Engineering Yonsei University Seoul 03722 Republic of Korea
| | - Su Min Yun
- Nano Science Technology Institute Department of Materials Science and Engineering Yonsei University Seoul 03722 Republic of Korea
| | - Enji Kim
- Nano Science Technology Institute Department of Materials Science and Engineering Yonsei University Seoul 03722 Republic of Korea
| | - Jang‐Ung Park
- KIURI Institute Yonsei University Seoul 03722 Republic of Korea
- Nano Science Technology Institute Department of Materials Science and Engineering Yonsei University Seoul 03722 Republic of Korea
| |
Collapse
|