Multicopper Laccase Mimicking Nanozymes with Nucleotides as Ligands

Copper-based fluorescent nanozyme used to construct a ratiometric sensor for visual detection of thiophanate methyl

Although nanozyme has shown great potential in designing fluorescent assays for pesticide residue, most of them are based on single emission, thus affecting the detection accuracy. Herein, a copper-based fluorescent nanozyme (Cu-BH) synthesized with dual-ligand, integrating fluorescence and oxidase-mimic into one spherical nanomaterial, was used firstly to establish a ratiometric approach for visual detection of thiophanate methyl (TM). Cu-BH possesses excellent oxidase-like activities, triggering the oxidation of colorless o-phenylenediamine (OPD) into yellow luminescent products (oxOPD, λem = 564 nm). Besides, the ligand of 2-amino-1,4-benzene-dicarboxylic acid imparts Cu-BH blue fluorescence (λem = 425 nm), which is quenched by oxOPD via inner filtration effect (IFE). The introduction of TM can prevent not only the oxidase-like activity remarkably but also the intrinsic luminescence of Cu-BH slightly because of the complexation of TM with Cu2+. As a result, the fluorescence intensity at 564 nm and 425 nm presents a significant decrease and a slight increase, respectively, producing a ratiometric fluorescent signal (F425/F564). Therefore, a novel ratiometric fluorescent strategy has been proposed to detect TM ranging from 0.1 to 100 μM with detection limit of 0.03 μM (S/N = 3). Besides, visual detection of TM can be achieved by RGB reading with the assistance of smartphone owing to the color variation from yellow to blue. This fluorescent nanozyme-based ratiometric strategy provides a specific method for the detection of TM in food samples.

Copper-based biomimetic nanozymes with multi-enzyme activity for phosphate detection

Nanozymes are nanoparticles with enzymatic activity, which are widely used in environmental and antibacterial research. Herein, we designed and synthesized novel amorphous nanozyme Cu-Im NPs with multiple enzyme-mimicking activities. Cu-Im NPs have the same active sites as natural laccase. In addition, the active center is similar to that of carbonic hydrolase, replacing the zinc ions with copper ions. Meanwhile, Cu-Im NPs also possess peroxidase-like activity. We reveal the multi-enzyme catalytic mechanisms of Cu-Im NPs. Notably, phosphate inhibits the laccase-like and peroxidase-like activities of Cu-Im NPs while activating their hydrolase activity. Based on these findings, we have developed a sensitive and selective method for detecting phosphate anions.

One-step construction of bioinspired multi-enzyme mimicking nanozyme as a universal platform for multi-mode sensing and catalytic degradation

Nanozymes, a category of nanomaterials with exceptional enzyme-like activity, exhibit the significant promise to overcome the inherent limitations of natural enzymes. Inspired by the active site structure of natural laccase, a biomimetic MA-Cu nanozyme with three-dimensional network structure was constructed in water system through one-step complexation based on the specific coordination between nitrogen-rich triazine heterocyclic melamine and Cu2+, in a facile, green and economical manner. Compared to natural laccase, MA-Cu possesses superior multi-enzyme mimicking activity, stability and cost-effectiveness. Through comprehensive characterizations, activity tests and theoretical calculations, the catalytic mechanism and the ligand-tunability of enzyme-like activity have been thoroughly investigated. Based on its multi-enzyme-like activities, a multifunctional monitoring platform for sulfide in food, epinephrine in preparations and glutathione in cells was successfully constructed, respectively. Notably, a green degradation and discrimination platform based on MA-Cu for various pollutants was developed, exhibiting distinguished substrate universality and detoxication capacity. As a stable, easily scalable and commercially applicable nanozyme, MA-Cu is expected to become a compelling candidate for replacing natural enzyme, showing excellent prospects in environmental remediation and biosensing.

High-power "nesting-doll" biofuel cell enabled by free-standing electrodes with inherent enzymatic function

Biofuel cell (BFC) is a type of green energy device based on the biocatalyst-mediated redox reaction. However, their relatively low performance has limited their wider application. Here, we proposed a novel all-in-one strategy to design the free-standing electrodes with the inherent enzyme-like activity and high conductivity, in which, the dynamic limitations of the enzyme-electrode interface were eliminated. This approach facilitated rapid electron transfer by removing the need to coat enzymes on the electrode. Furthermore, the enzyme-mimic characteristic enhanced the stability of BFC. Notably, the step-by-step "ionic corrosion-electrografting coordination" of Cu foam yielded the free-standing cathode, which exhibited excellent laccase-like activity. Concurrently, the in-situ loading of gold particles on the Ni foam can serve as an exemplary mimic of the glucose oxidase. Furthermore, a "nesting doll" nanozyme BFC device was developed, in which, the anode was placed inside the cathode to create a multi-shell coaxial configuration. The four-tier devices demonstrated an elevated open-circuit voltage of 1.7 V, and the output power density was 3639.0 μW cm⁻2 measured by resistance method, which was superior to that of the reported literatures. This study presents a pioneering approach to improving output performance and stability, thereby broadening the potential scope of BFC application.

Lanthanide coordination polymers as luminescent laccase mimics for ratiometric sensing of dopamine

Some metal ions, with inner enzyme-like catalytic activity, could be doped into lanthanide coordination polymers (Ln CPs) through coordination, which has been proved as a facile strategy to prepare the luminescent nanozymes. In this study, Cu-doped Ln CPs with laccase-mimic activity and double luminescence were rationally designed and synthesized by self-assembly of guanine monophosphate (GMP), 2-aminoterephthalic acid (ATA), Cu2+ and Tb3+ in buffer solution at room temperature. The obtained probes Tb/Cu-GMP/ATA CPs not only emitted green fluorescence of Tb3+ and blue fluorescence of ATA simultaneously under irradiation at the same wavelength, but also processed enhanced laccase-like activity for catalyzing the oxidation of phenolic substrates. Upon dopamine (DA), the probes catalyzed the oxidation of DA to polydopamine (PDA), which effectively quenched the fluorescence of Tb3+ due to the internal filtration effect. Based on this, a ratiometric fluorescent sensor for DA was constructed accordingly, and the corresponding fluorescence intensity ratio of Tb3+to ATA (F547/F427) was linearly correlated with the DA concentration in the range of 1 to 400 μM, with a detection limit of 0.44 μM. Besides, this sensor could be used to detect DA in human serum samples with good recovery, which results were highly consistent with that of HPLC method. The constituent and luminescence tunability, as well as the extraordinarily facile synthesis, made Ln CPs a potential platform for designing and preparing the integrated multifunctional probe for special target in sensing applications.

Sensing array based on imidazole-regulated Cu@MOFs nanozymes with enhanced laccase-like activity for the discrimination of phenolic pollutants

BACKGROUND

Phenolic pollutants with high toxicity and low biodegradability can disrupt environmental balance and severely affect human health, whereas existing methods are difficult to implement the rapid and high-throughput detection of multiple phenolic pollutants.

RESULTS

Herein, we developed a four-dimensional colorimetric sensor array based on imidazole-modulated Cu@MOFs for distinguishing and determining phenolic pollutants. Wherein, four Cu@MOFs (ATP@Cu, ADP@Cu, AMP@Cu, and GMP@Cu) nanozyme with laccase-like activity were firstly prepared, and a novel strategy of imidazole-containing molecules-regulated was proposed to improve the laccase-like activity of Cu@MOFs nanozymes. Interestingly, imidazole (IM) exhibited the strongest enhancing effects on the laccase-like activity of the four Cu@MOFs by accelerating electron transfer on the surface of laccase nanozymes and producing more reactive oxygen species. Subsequently, by using Cu@MOFs@IM as the recognition elements of the sensor array, a colorimetric sensor array based on imidazole-modulated Cu@MOFs was developed, and differentiation and classification of phenolic pollutants were carried out using LDA and HCA methods. More importantly, the proposed sensor array could accomplish the identification of 6 phenolic pollutants and their mixtures.

SIGNIFICANCE

Additionally, the designed sensor array was applied to identify these phenolic pollutants in real water samples, further highlighting the potentials for assessing water pollution.

Versatile laccase-mimicking enzyme for dye decolorization and tetracyclines identification upon a colorimetric array sensor

In this study, the laccase-mimicking enzyme MnO2/Cu-BDC-His was synthesized by a facile procedure, and was applied in tetracycline antibiotics (TCs) identification and dye degradation. The MnO2/Cu-BDC-His nanozymes effectively recognized phenolic hydroxyl groups in TCs and catalyzed the generation of colored oxidation products with different characteristic absorbance peaks at 350 nm, 525 nm and 600 nm. Different TCs mixtures produced different absorbance intensities at the above wavelengths and exhibited cross-color responses. Consequently, a colorimetric array sensor for the simultaneous identification and detection of TCs with wavelength as the sensing element was established. Unlike the traditional "lock-and-key" detection mode, the array sensor enabled simultaneous multi-analyte detection and identification, which achieved the identification and quantification of mixed TCs in the range of 5-200 µM, providing a premise for its application in lake and soil water. Additionally, the MnO2/Cu-BDC-His nanozymes were also applied in colored dyes decolorization. Therefore, MnO2/Cu-BDC-His nanozymes provided a promising application in environmental monitoring.

Nucleotide coordinated polymers, a ROS-based immunomodulatory antimicrobial, doubly kill Pseudomonas aeruginosa biofilms of implant infections

Pseudomonas aeruginosa causes high morbidity and mortality in nosocomial infections, and newly approved antibiotics have been declining for decades. A green and universal deprotonation-driven strategy is used to screen the guanylic acid-metal ion coordination polymer nanoparticles (GMC), instead of the failure of binding occurs when specific metal ion participation. We find that the precise pH-dependent oxidase-like activity of GMC-2 orchestrates a duple symphony of immune modulation for Pseudomonas aeruginosa biofilm infections. Specifically, GMC-2-mediated reactive oxygen species (ROS) regulation triggers mitochondrial dysfunction and releases damage-associated molecular patterns, engaging pattern recognition receptors and resulting in endogenous innate immune activation. Meanwhile, GMC-2-triggered ROS generation in a mildly acidic biofilm environment destroys the biofilm, exposing exogenous pathogen-associated molecular patterns. GMC-2 cannot cause resistance for Pseudomonas aeruginosa compared with conventional antibiotics. In an infected implant mouse model, Pseudomonas aeruginosa biofilms were effectively eliminated by GMC-2-mediated triggering of innate and adaptive immunity. These findings provide a universal approach for facilitating the binding of biomolecules with metal ions and highlight the precise ROS-regulating platform plays a critical role in initiating endogenous and exogenous immune activation targeted for bacterial biofilm infection.

Direct competitive immunoassay method for sensitive detection of the histamine in foods based on a MI-Cu-GMP nanozyme marker and molecularly imprinted biomimetic antibody

BACKGROUND

Histamine may lead to low blood pressure, skin flushing and edema when it accumulates in large amounts in the body. Therefore, establishing sensitive methods for the detection of histamine in foods is extremely important to ensure food safety and human health.

RESULTS

The MI-Cu-GMP NPs (2-methylimidazole-copper-guanosine monophosphate nanozymes) with high laccase-like activity were synthesized. Using the prepared molecular imprinted membrane as biomimetic antibody and MI-Cu-GMP NPs as marker, a sensitive direct competitive biomimetic enzyme-linked immunoassay (BELISA) method for rapid detection of the histamine in foods was developed. Under optimal conditions, the limit of detection (LOD, IC15) and sensitivity (IC50) of the BELISA method for histamine was 0.05 mg L-1 and 1.22 mg L-1, respectively. The liquor samples spiked with histamine was detected by the BELISA method with satisfactory recoveries ranging from 90.00% to 116.00%. Further, the level of histamine in three samples (cooking wine, rice vinegar and soy sauce) was tested by the BELISA and high-performance liquid chromatography (HPLC), with no significant difference found between the two methods.

CONCLUSION

Given the advantages, the established BELISA method is expected to provide practical guidance for the monitoring of histamine in food and provides a foundation for the detection of other food hazards. © 2024 Society of Chemical Industry.

Active site-inspired multicopper laccase-like nanozymes for detection of phenolic and catecholamine compounds

Phenolic compounds are typical organic pollutants which cause severe human health problems due to their teratogenesis, carcinogenesis, neurotoxicity, immunotoxicity and endocrine disruption. Natural laccase is a multicopper oxidase existing in bacteria, plants, and insects, which can accelerate the transformation of phenolic compounds to their less hazardous oxidized products under mild conditions without harmful byproducts. Despite eco-environmentally friendly property of laccase, it still faces constraints of widespread application attribute to its high cost, complex preparation, and vulnerability. Therefore, exploring laccase mimics with high catalytic activity attracts a lot of attention and endeavors. In this research, copper-based nanozymes were prepared with coordination of copper ions and imidazole for mimicking the active sites of natural laccase via solvothermal method. The obtained Cu-based (Cu-Im) nanozymes exhibited multiple redox valence states of Cu and laccase-mimicking coordination structures, which endow Cu-Im with high laccase-like activity. During the process of catalytic oxidation reactions, singlet oxygen and superoxide anions generated from oxygen. Encouraged by the catalytic property, Cu-Im was utilized in degradation and detection of phenolic and catecholamine compounds. The catalytic degradation of compounds by Cu-Im showed good conversion and substrate versatility, which can be used as a kind of potential materials for phenolic pollutant degradation and remediation. Simultaneously, colorimetric sensors of phenols and catecholamines based on Cu-Im in solution system and POCT pad platform were constructed which indicated wide linear range and low limit of detection for both detection strategies. The Cu-Im-based sensor was a promising method for sensitive, fast, convenient, and qualitative-quantitative colorimetric analysis of phenols and catecholamines. The outcomes of this research elucidate Cu-Im is a satisfactory substitute for natural laccase, which will have broad application prospects in laccase-related fields, such as environmental recovery, pollution monitoring, and diagnosis of neurological diseases etc.

A novel method for the rapid determination of phenolic compounds based on the nanozyme with laccase-like activity

Phenolic compounds are prevalent in domestic and industrial effluents, leading a serious environmental hazard. Paper-based analysis device mediated by nanozymes has shown great potential in portable visual determination of phenolic compounds in the environment. In this work, we used nicotinic acid derivatives such as pyridine-2,3-dicarboxylic acid, 2-methylnicotinic acid and 2-aminonicotinic acid by coordinating copper (II) acetate monohydrate coordination to obtain Cu2-COOHNA, Cu2-CH3NA, Cu2-ANA nanozymes with laccase-activity. Compared with natural laccase and CuNA, Cu2-ANA exhibited higher catalytic activity with a similar Km of 0.05 mM and a higher Vmax of 6.08 μM min-1. Cu2-ANA also exhibited a remarkable level of stability and can be used under a wide range of conditions. In addition, Cu2-ANA catalyzed the oxidation of different common phenolic compounds (PCs) and mix PCs. A visually inspective portable sensor constructed by using paper test strips coated with Cu2-ANA employed the colorimetric method for evaluating the concentration of PCs. There is no need for complicated instrumentation, and the popularity and portability of smartphones make on-site testing more efficient and convenient.

The Electrochemical Detection of Bisphenol A and Catechol in Red Wine

The use of nanozymes for electrochemical detection in the food industry is an intriguing area of research. In this study, we synthesized a laccase mimicking the MnO2@CeO2 nanozyme using a simple hydrothermal method, which was characterized by modern analytical methods, such as transmission electron microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray spectroscopy (EDX), etc. We found that the addition of MnO2 significantly increased the laccase-like activity by 300% compared to CeO2 nanorods. Due to the excellent laccase-like activity of the MnO2@CeO2 nanozyme, we developed an electrochemical sensor for the detection of hazardous phenolic compounds such as bisphenol A and catechol in red wines by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). We used the MnO2@CeO2 nanozyme to develop an electrochemical sensor for detecting harmful phenolic compounds like bisphenol A and catechol in red wine due to its excellent laccase-like activity. The MnO2@CeO2 nanorods could be dispersion-modified glassy carbon electrodes (GCEs) by polyethyleneimine (PEI) to achieve a rapid detection of bisphenol A and catechol, with limits of detection as low as 1.2 × 10-8 M and 7.3 × 10-8 M, respectively. This approach provides a new way to accurately determine phenolic compounds with high sensitivity, low cost, and stability.

Cu,Ce-containing phosphotungstates as laccase-like nanozyme for colorimetric detection of Cr(VI) and Fe(Ⅲ)

Herein, a nanocomposite of Cu,Ce-containing phosphotungstates (Cu,Ce-PTs) with outstanding laccase-like activity was fabricated via a one-pot microwave-assisted hydrothermal method. Notably, it was discovered that both Fe3+ and Cr6+ could significantly enhance the electron transfer rates of Ce3+ and Ce4+, along with generous Cu2+ with high catalytic activity, thereby promoting the laccase-like activity of Cu,Ce-PTs. The proposed system can be used for the detection of Fe3+ and Cr6+ in a range of 0.667-333.33 μg/mL and 0.033-33.33 μg/mL with a low detection limit of 0.135 μg/mL and 0.0288 μg/mL, respectively. The proposed assay exhibits excellent reusability and selectivity and can be used in traditional Chinese medicine samples analysis.

A convenient colorimetric assay for Cr(VI) detection based on homogeneous Cu(II)-GMP system with oxidoreductase-like activity

Hexavalent chromium (Cr(VI)) is an environmental pollutant and recognized as a human carcinogen. Therefore, it is necessary to develop a simple and sensitive detection technique for Cr(VI). Herein, it is found that Cu2+ interacts with guanosine 5'-monophosphate (GMP) to form a homogeneous Cu(II)-GMP complex (Cu2+·GMP) that efficiently displays the oxidoreductase-like catalytic activity. Cu2+·GMP can catalyze the oxidation between Cr(VI) and substrate 3,3',5,5'- tetramethylbenzidine (TMB), resulting in color change recognized by the naked eyes. Base on this, a convenient colorimetric assay for Cr(VI) detection was developed. The detection limit (3σ/s) of this sensor for Cr(VI) was 23 nM with a linear range of 0.1-25 μM. Moreover, the proposed assay was successfully applied to detect Cr(VI) in different environmental water samples with satisfactory recoveries. Our method is simple, efficient, rapid and cost-effective for Cr(VI) detection without the need for complicated material preparation or special separation, which shows great potential in environmental monitoring.

LTP-assisted fabrication of laccase-like Cu-MOF nanozyme-encoded array sensor for identification and intelligent sensing of bioactive components in food

Nanozymes are potential candidates for constructing sensors due to their adjustable activity, high stability, and high cost-effectiveness. However, due to the lack of reasonable means, designing and preparing efficient nanozymes remains challenging. Herein, inspired by the property of natural laccase, we applied the novel and facile low-temperature plasma (LTP) technology to fabricate a series of different base-ligand Cu metal organic framework (MOF) nanozymes (namely, A-Cu, G-Cu, C-Cu and T-Cu nanozymes) with laccase-like activity successfully. Owing to the different catalytic capacities of four types of base-Cu-MOF nanozymes in the response to five common effective bioactive substances, we constructed the nanozyme-encoded array sensor for the identification of different bioactive compounds. As a result, the four-channel colorimetric sensor array was constructed, in which four laccase-like nanozymes were utilized as the sensing units, achieving high-throughput, high-sensitivity and rapid detection/identification of five common bioactive compounds in the concentration range of 1.5-150 μg mL-1 through different color output patterns. It is worth noting that the as-prepared sensor array can successfully distinguish the natural bioactive compounds in a variety of real samples. Furthermore, with the assistance of smartphones, we also designed a portable smart sensing approach for detecting the bioactive compounds effectively in food. This study has therefore not only provided an effective way for preparation highly effectively nanozymes, but also established a new sensing platform for intelligent sensing of bioactive components in food.

Multifunctional Scaffold Comprising Metal-Organic Framework, Hydrogel, and Demineralized Bone Matrix for the Treatment of Steroid-Induced Femoral Head Necrosis

Overproduction of reactive oxygen species (ROS) results in oxidative stress, a critical factor in the pathogenesis of steroid-induced osteonecrosis of the femoral head (SONFH). Excess ROS not only hinders the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) but also impairs mitochondrial structure and function, resulting in irreversible cellular damage. Herein, a biomimetic multifunctional scaffold comprising Zn-modified metal-organic framework 818 (Zn-MOF-818) loaded with deferoxamine (DFO), gelatin methacryloyl (GelMA) hydrogel, and demineralized bone matrix (DBM) is shown to scavenge excess ROS, promote angiogenesis, and regulate immunity. Introduced Zn significantly enhances the superoxide dismutase- and catalase-like activities of MOF-818, which increases ROS-scavenging efficiency. Zn-MOF-818 disrupts the vicious intracellular cycle of mitochondrial dysfunction and ROS accumulation by enhancing mitophagy, stabilizing mitochondrial function, and upregulating antioxidant genes. Additionally, Zn-MOF-818 facilitates the polarization of macrophages toward the M2 phenotype and alleviates inflammation, creating an advantageous immune microenvironment for osteogenic differentiation of BMSCs. The release of DFO, an activator of the HIF-1α pathway, and Zn2+ from Zn-MOF-818, along with the secretion of various cytokines from DBM (such as bone morphogenetic proteins and vascular endothelial growth factors), enhances angiogenesis and osteogenesis. This scaffold targets multiple factors concurrently, offering a promising new approach for treating SONFH.

One-Pot and Gram-Scale Synthesis of Fe-Based Nanozymes with Tunable O2 Activation Pathway and Specificity Between Associated Enzymatic Reactions

Nanozymes have recently gained attention for their low cost and high stability. However, unlike natural enzymes, they often exhibit multiple enzyme-like activities, complicating their use in selective bioassays. Since H2O2 and O2 are common substrates in these reactions, controlling their activation-and thus reaction specificity-is crucial. Recent advances in tuning the chemical state of cerium have enabled control over H2O2 activation pathways for tunable peroxidase/haloperoxidase-like activities. In contrast, the control of O2 activation on an element in oxidase/laccase nanozymes and the impact of its chemical state on these activities remains unexplored. Herein, a facile one-pot method is presented for the gram-scale synthesis of Fe-based nanozymes with tunable compositions of Fe3O4 and Fe3C by adjusting preparation temperatures. The Fe3O4-containing samples exhibit superior laccase-like activity, while the Fe3C-containing counterparts demonstrate better oxidase-like activity. This divergent O2 activation behavior is linked to their surface Fe species: the abundant reactive Fe2+ in Fe3O4 promotes laccase-like activity via Fe3+-superoxo formation, whereas metallic Fe in Fe3C facilitates OH radical generation for oxidase-like activity. Controlled O2 activation pathways in these Fe-based nanozymes demonstrate improved sensitivity in the corresponding biomolecule detection, which should inform the design of nanozymes with enhanced activity and specificity.

A Cu-based metal-organic framework synthesized via a green method exhibits unique catecholase-like activity for epigallocatechin gallate detection in teas

Tea contains various antioxidant compounds, including polyphenols, catechins, theaflavins, theasinensins, and flavonoids. Among these, epigallocatechin gallate (EGCG) is a crucial antioxidant recognized for its potent bioactivity. This study presents the synthesis of a highly selective Cu-PyC NH4+-based metal-organic framework (MOF) nanozyme that exhibits catecholase-like activity to assess the antioxidant capabilities of EGCG. The developed nanozyme demonstrates robust stability and specificity in oxidizing 3,5-di-tert-butylcatechol (3,5-DTBC), showcasing unique catecholase activity distinct from that of typical oxidase nanozymes. Furthermore, this nanozyme displays exceptional efficacy, sensitivity, and selectivity in targeting EGCG, enabling accurate quantification of EGCG levels in commercial tea products via UV-spectroscopy. The assay exhibits a linear response within the EGCG concentration range of 0.5-125 μM, with a detection limit of 0.83 μM, alongside excellent reproducibility and stability. These findings suggest that this nanozyme offers a promising approach for precisely evaluating antioxidants, with significant implications for the food and beverage industry and health research.

Machine learning-assisted laccase-like activity nanozyme for intelligently onsite real-time and dynamic analysis of pyrethroid pesticides

The intelligently efficient, reliable, economical and portable onsite assay toward pyrethroid pesticides (PPs) residues is critical for food safety analysis and environmental pollution traceability. Here, a fluorescent nanozyme Cu-ATP@ [Ru(bpy)3]2+ with laccase-like activity was designed to develop a versatile machine learning-assisted colorimetric and fluorescence dual-modal assay for efficient onsite intelligent decision recognition and quantification of PPs residues. In the presence of alkaline phosphatase (ALP), the laccase-like activity of Cu-ATP@ [Ru(bpy)3]2+ was enhanced to oxidize colorless o-phenylenediamine (OPD) into dark-yellow 2,3-diaminophenazine (DAP) via electron transfer, appearing a new yellow fluorescence at 550 nm. Meanwhile, the red fluorescence of Cu-ATP@ [Ru(bpy)3]2+ at 600 nm was quenched due to the internal filter effect (IFE) of DAP towards Cu-ATP@ [Ru(bpy)3]2+. However, the selective inhibition of PPs toward ALP activity enabled to observe a dual-modal response of PPs concentration-dependent decrease in colorimetric signal and enhancement in the fluorescence intensity ratio of F600 nm/F550 nm. On this basis, both the colorimetric and fluorescence images were captured and processed with a home-made WeChat applet-installed smartphone to extract the corresponding image color information, thus achieving machine learning-assisted onsite real-time and dynamic intelligent decision recognition and quantification of PPs residues in real samples, which shows a promising potential in safeguarding food safety and environmental health.

Construction of pyrimidine derivatives-copper enzyme mimics as colorimetric sensing elements for efficient detection of phenolic compounds and hydrogen peroxide

As concerns about environmental pollution grow, the rapid identification and quantification of pollutants have become increasingly vital. In this work, a series of pyrimidine derivatives-Cu enzyme mimics (Cytosine-Cu, Cytidine-Cu, and CMP-Cu) with laccase- and peroxidase-like activity were prepared through the coordination of Cu2+ with different pyrimidine derivatives (PDs). The PDs-Cu enzyme mimics contain high levels of Cu+ and N - Cu coordination structures, which provide sufficient catalytic sites for the substrates. Compared with natural enzymes and other nanozymes, PDs-Cu demonstrate superior substrate affinity, catalytic efficiency, stability, and resistance to interference. It was found that PDs-Cu enzyme mimics have different catalytic activities towards different phenolic compounds. Therefore, a three-channel colorimetric sensor array (CSA) was successfully developed utilizing PDs-Cu as the sensing elements. The CSA can accurately identify different phenolic compounds and their mixtures in seawater and simulated wastewater. Additionally, a colorimetric method for detecting H2O2 in eye drops was developed, featuring a detection range of 0.1-10.0 μM and a limit of quantification of 0.1 μM. This research not only provides a flexible protocol for regulating the catalytic activity of enzyme mimics, but also provides important inspiration for the development of methods for rapid identification and detection of contaminants in the environmental water.

Thermophilic lignin-based laccase nanozyme with CuNx center for the detection of epinephrine and degradation of phenolic pollutants

Natural laccases are a family of multi‑copper oxidases that can oxidize multiple phenol substrates and of great importance to contaminant remediation and biosensing. However, the construction of substitutes for the expensive and perishable laccase used in harsh conditions remains a great challenge. Here, we reported a novel strategy for the fabrication of copper-doped lignin-based laccase nanozymes (Cu-AL) through the coordination of aminated lignin and different copper sources. The Cu-AL prepared from CuSO4, possessed highest Cu content and Cu+ proportion, exhibited the best laccase-like activity to various phenols degradation. Strikingly, the thermophilic Cu-AL exhibited superior catalytic activity at 100 °C (3.23 times than that of 60 °C) and durability (> 50 % activity even after 160 days stored in water). Furthermore, a smartphone-based detection platform was successfully developed to achieve the rapid, convenient, and accurate detection of epinephrine concentration. In summary, this work provides a new sustainable and low-cost way to design robust laccase nanozymes from lignocellulose biomass, especially for expanding the applications of enzymatic reaction with high-temperature operation and/or long-term storage in environmental remediation and biosensing.

A novel dual-ligand copper-based nanoflower for the colorimetric and fluorescence detection of 2,4-dichlorophenol, epinephrine and hydrogen peroxide

BACKGROUND

Nanozymes have the advantages of cost effective, simple synthesis, high durability and stability, and have been widely used in various fields. However, only a few nanomaterials with multiple enzyme-like activity have been reported, and most of the currently developed nanozymes are usually used in colorimetric or fluorescence analysis depending on a single colorimetric or fluorescence signal output. In this study, a copper-based dual-ligand biomimetic nanoflower (Cu-MN) was constructed, which demonstrated potential multiple enzyme-like activity, and was applied to the multi-mode detection of 2,4-dichlorophenol (2,4-DP), epinephrine (EP), and H2O2.

RESULTS

The laccase-like activity of Cu-MN can catalyze the conversion of 2,4-DP and EP, resulting in the formation of red and yellow-brown oxidation products with distinct UV absorption peaks at 510 nm and 485 nm, respectively. Furthermore, the fluorescence emission peak at 426 nm of Cu-MN can be dynamic quenched during substrate oxidation due to the fluorescence internal filtration effect (IFE). Therefore, a dual-mode analysis method was constructed to detect 2,4-DP and EP by fluorescence and ultraviolet colorimetry, which was successfully applied in natural lake water and rabbit plasma analysis, respectively. Furthermore, a colorimetric sensing strategy based on the peroxidase-like activity of Cu-MN was developed and successfully applied to the monitoring of H2O2 in hydrogen peroxide disinfectant. Additionally, the visualization analysis method was also established by RGB reading of the smartphone.

SIGNIFICANCE AND NOVELTY

In brief, inspired by the fluorescence characteristics of 2-aminoterephthallc acid and the imidazole group of 2-methylimidazole, a novel copper-based dual-ligand biomimetic nanoflower (Cu-MN) was prepared and used to establish multi-mode method for the detection of 2,4-DP, EP, and H2O2, which opens up new avenues for its applications in bioanalysis and environmental monitoring.

Building hydrophobic substrate pocket to boost activity of laccase-like nanozyme through acetonitrile-mediated strategy

Nanozymes, as promising alternatives to natural enzymes, offer several advantages with biocatalytic functions but remain inferior in catalytic activity. It is crucial to focus on factors that affect the enzymatic activity of nanozymes and develop strategies to make them more competitive with natural enzymes. Herein, CuV2O5 nanorods are confirmed to own the intrinsic laccase-like activity, and an acetonitrile (MeCN)-mediated strategy is proposed for reaction acceleration by mimicking the enzymatic substrate pocket. In the presence of MeCN, the interaction between substrates and nanozymes gets efficiently promoted by the bridging function of cyano-group, where the utilization of Cu active sites is greatly improved due to the condensed hydrophobic substrate layers formed in the vicinity of CuV2O5 nanorods by the solvent effect of MeCN. Theoretical calculations also disclose that the addition of MeCN endows 2,4-dichlorophenol (2,4-DP) with a lower free-energy barrier in adsorption and activation on the surface of CuV2O5 nanozyme. Benefiting from the improved activity, a sensitive colorimetric sensing platform for 2,4-DP is constructed with the limit of detection as low as 0.48 μM. Our finding lays a theoretical foundation for achieving high-performance catalytical activity of the nanozymes based on the modulation of the reaction microenvironment, effectively alleviating the complex engineering process of nanozymes.

2-Methylbenzimidazole-copper nanozyme with high laccase activity for colorimetric differentiation and detection of aminophenol isomers

Laccase is well-known for its eco-friendly applications in environmental remediation and biotechnology, but its high cost and low stability have limited its practical use. Therefore, there is an urgent need to develop efficient laccase mimetics. In this study, a novel laccase-mimicking nanozyme (MBI-Cu) was successfully synthesized using 2-methylbenzimidazole (MBI) coordinated with Cu2+ by mimicking the copper active site and electron transfer pathway of natural laccase. MBI-Cu nanozyme exhibited excellent catalytic activity and higher stability than laccase, and was utilized to oxidize a series of phenolic compounds. Environmental pollutant aminophenol isomers were found to display different color in solution when catalytically oxidized by MBI-Cu, which provided a simple and feasible method to identify them by the naked eye. Based on the distinct absorption spectra of the oxidized aminophenol isomers, a colorimetric method for quantitatively detecting o-AP, m-AP, and p-AP was established, with detection limits of 0.06 μM, 0.27 μM, and 0.18 μM, respectively. Furthermore, by integrating MBI-Cu-based cotton pad colorimetric strips with smartphone and utilizing color recognition software to identify and analyze the RGB values of the images, a portable colorimetric sensing platform was designed for rapid detection of aminophenol isomers without the need for any analytical instrument. This work provides an effective reference for the design of laccase nanozymes and holds significant potential for applications in the field of environmental pollutant monitoring.

Copper formate-lysine nanoparticles with polyphenol oxidase-like activity for the detection of epinephrine

Laccase is an enzyme known for its eco-friendly uses in environmental cleanup and biotechnology. However, it has limitations such as low stability, high cost, and complex recycling. So, there is a need for laccase mimics that can effectively imitate its properties. Herein, we created copper formate-lysine nanoparticles (Cuf-Lys) that mimic laccase's activity. The developed Cuf-Lys demonstrated remarkable polyphenol oxidase-like activity, stability, and recyclability, making them suitable for the fabrication of efficient colorimetric sensors for the detection of epinephrine. These sensors had a specific response and could accurately measure epinephrine concentrations ranging from 2.5 to 50 μM, with a detection limit as low as 1 μM. Furthermore, the biosensor demonstrated high sensitivity and selectivity when applied to the detection of rutin. The limit of detection for rutin was determined to be 0.16 μM while in the linear concentration range of 0.25 to 150.0 μM. We believe that Cuf-Lys provide a new route for the design of laccase mimics, showing potential applications for biomedical diagnosis and environmental monitoring.

Amino-Induced Modulation of Electronic State and Neighboring Site Distance through Second Shell Boosted Catecholase-Mimicking Activity of Electron-Rich Cu Center

Boosting the biomimetic catalytic activity of nanozyme is important for its potential application. One common strategy to achieve this goal mainly focused on manipulating the electronic state of metal site through the first coordination shell to modulate the adsorption/desorption strength of related reactant, intermediate and/or product, but remained challenging. Taking Cu-based catecholase-mimicking nanozyme for example, this work herein reports a different strategy involving amino-induced modulation of electronic state through the second shell to raise the electron density of Cu site, which further triggers the repulsion effect between neighboring geminal Cu centers to increase the Cu─Cu distance. The resulting nanozyme with electron-rich Cu site (DT-Cu) presents a lower work function and an upshifted d-band center in comparison with its counterpart (i.e., relatively electron-deficient TA-Cu), which promotes the electron transfer and enhances the adsorption strengths of Cu site for O2, catechol and H2O2 intermediate. The longer Cu─Cu distance of DT-Cu accelerated the O─O bond dissociation of H2O2 intermediate. This expedites the oxygen reduction process during catecholase-like catalysis, which together with the enhanced O2/H2O2/catechol adsorption corporately boosts the catecholase-like activity of DT-Cu.

Emerging Roles of Nanozymes in Plant and Environmental Sectors

The demand for food has increased dramatically as the global population increases, putting more strain on the sustainability of agriculture. To fulfill this requirement, it is imperative to develop brand-new technologies. The application potential of nanozymes in the plant and environmental sectors is progressively becoming apparent as a result of their effective enzymatic catalytic activity and the distinctive characteristics of nanomaterials, including size, specific surface area, optical properties, and thermal properties. Herein, we systematically analyze the catalytic mechanisms of nanozymes with different enzyme-mimetic activities and summarize their applications in improving crop yields by regulating ROS levels and enhancing stress resistance and detecting and removing hazardous pollutants. Finally, we thoroughly analyze the challenges faced by nanozymes regarding size, design, application, economy, and biosafety and look forward to their future development directions to better serve sustainable agriculture.

Dual colorimetric platforms for direct detection of glyphosate based on Os-Rh nanozyme with peroxidase-like activity

BACKGROUND

To minimize the impact of pesticide residues in food on human health, it is necessary to enhance their detection. Recently, many nanozyme-based colorimetric methods for pesticides detection have been developed, however, they often required the assistance of natural enzymes, which made the process and result of methods susceptible to the stability and activity of natural enzymes. To overcome these drawbacks, methods for direct detection of pesticides using nanozymes have been developed, and there are few studies in this field currently. Thus, it is of great research and practical significance to develop more nanozymes-based colorimetric methods for direct detection of pesticides.

RESULTS

Dual colorimetric platforms based on Os-Rh nanozyme with excellent peroxidase-like activity were constructed for directly detection of glyphosate in this work. Results showed that glyphosate was able to sensitively and selectively inhibit the peroxidase-like activity of Os-Rh nanozyme through hindering the decomposition of H2O2 by Os-Rh nanozyme to produce HO∙. Based on this, the dual colorimetric platforms achieved highly sensitive detection for glyphosate over a wide linear concentration range (50-1000 μg L-1 in solution platform and 200-1000 μg L-1 in paper platform), with the detection limits of 28.37 μg L-1 in solution platform and 400 μg L-1 (naked-eye detection limit)/123.25 μg L-1 (gray scale detection limit) in paper platform, respectively. Moreover, the dual colorimetric platforms possessed satisfactory reliability and accuracy for practical applications, and has been successfully applied to the detection of real samples with the spiked recoveries of 92.78-102.75 % and RSD of 1.17-3.88 %.

SIGNIFICANCE

The dual colorimetric platforms for glyphosate direct detection based on Os-Rh nanozyme developed in this work not only owned considerable practical application potential, but also could provide more inspirations and ideas for the rational design and development of colorimetric sensing methods for the rapid detection of pesticides based on nanozymes.

Nucleobase-modulated copper nanomaterials with laccase-like activity for high-performance degradation and detection of phenolic pollutants

Laccases are the most commonly used agents for the treatment of phenolic pollutants. To address the instability and high cost of natural laccases, we investigated nucleobase-modulated copper nanomaterial with laccase-like activity. Various nucleobases, including adenine, guanine, cytosine, and thymine, were investigated as templates for Cu2+ reduction and copper nanomaterials formation due to their coordination capacity. By comparing structure and catalytic activity, the cytosine-mediated copper nanomaterial (C-Cu) had the best laccase-like activity and other nucleobase-templated copper nanomaterials exhibited low catalytic activity under the same conditions. The mechanism of nucleobase regulation of the catalytic activity of copper nanomaterials was further analyzed using X-ray photoelectron spectroscopy and density functional theory. The possible catalytic mechanisms of C-Cu, including substrate adsorption, substrate oxidation, oxygen binding, and oxygen reduction, were proposed. Remarkably, nucleobase-modulated copper nanozymes showed high stability and catalytic oxidation performance at various pH values, temperatures, long-term storage, and high salinity. In combination with electrochemical techniques, a portable electrochemical sensor for measuring phenolic pollutants was developed. This novel sensor exhibited a good linear response to catechol (10-1000 μM) with a limit of detection of 1.8 μM and excellent selectivity and anti-interference ability. This study provides not only a new strategy for the regulation of the laccase-like activity of copper nanomaterials but also a novel tool for the effective removal and low-cost detection of phenolic pollutants.

Novel Schiff's base-assisted synthesis of metal-ligand nanostructures for multi-functional applications: Detection of catecholamines/antibiotics, removal of tetracycline, and antifungal treatment against plant pathogens

The development of nanozymes (NZ) for the simultaneous detection of multiple target chemicals is gaining paramount attention in the field of food and health sciences, and waste management industries. Nanozymes (NZ) effectively compensate for the environmental vulnerability of natural enzymes. Considering the development gap of NZ with diverse applications, we synthesized versatile Schiff's base ligands following a facile route and readily available starting reagents (glutaraldehyde, aminopyridines). DPDI, one of the synthesized ligands, readily reacted with transition metal ions (Cu+2, Ag+1, Zn+2 in specific) under ambient conditions, yielding the corresponding nanoparticles/MOF. The structures of ligands and their products were confirmed using various analytical techniques. The enzymatic efficacy of DPDI-Cu (km 0.25 mM=, Vmax = 10.75 µM/sec) surpassed Tremetese versicolor laccase efficacy (km 0. 5 mM=, Vmax = 2.15 µM/sec). Additionally, DPDI-Cu proved resilient to changing pH, temperature, ionic strength, organic solvent, and storage time compared to laccase and provided reusability. DPDI-Cu proved promising for colorimetric detection of dopamine, epinephrine, catechol, tetracycline, and quercetin. The mechanism of oxidative detection of TC was studied through LC/MS analysis. DPDI-Cu-bentonite composite efficiently adsorbed tetracycline with maximum Langmuir adsorption of 208 mg/g. Moreover, DPDI/Cu and DPDI-Ag nanoparticles possessed antifungal activity exhibiting a minimum inhibitory concentration of 400 µg/mL and 3.12 µg/mL against Aspergillus flavus. Florescent dye tracking and SEM/TEM analysis confirmed that DPDI-Ag caused disruption of the plasma membrane and triggered ROS generation and apoptosis-like death in fungal cells. The DPDI-Ag coating treatment of wheat seeds confirmed the non-phytotoxicity of Ag-NPs.

A Bioinspired Single-Atom Fe Nanozyme with Excellent Laccase-Like Activity for Efficient Aflatoxin B1 Removal

The applications of natural laccases are greatly restricted because of their drawbacks like poor biostability, high costs, and low recovery efficiency. M/NC single atom nanozymes (M/NC SAzymes) are presenting as great substitutes due to their superior enzyme-like activity, excellent selectivity and high stability. In this work, inspired by the catalytic active center of natural enzyme, a biomimetic Fe/NC SAzyme (Fe-SAzyme) with O2-Fe-N4 coordination is successfully developed, exhibiting excellent laccase-like activity. Compared with their natural counterpart, Fe-SAzyme has shown superior catalytic efficiency and excellent stability under a wide range of pH (3.0-9.0), temperature (4-80 °C) and NaCl strength (0-300 mm). Interestingly, density functional theory (DFT) calculations reveal that the high catalytic performance is attributed to the activation of O2 by O2-Fe-N4 sites, which weakened the O─O bonds in the oxygen-to-water oxidation pathway. Furthermore, Fe-SAzyme is successfully applied for efficient aflatoxin B1 removal based on its robust laccase-like catalytic activity. This work provides a strategy for the rational design of laccase-like SAzymes, and the proposed catalytic mechanism will help to understand the coordination environment effect of SAzymes on laccase-like catalytic processes.

A facile and on-site sensing strategy for phenolic compounds based on a novel nanozyme with high polyphenol oxidase-like activity

Phenolic compounds (PCs) are diverse in nature and undergo complex migration and transformations in the environment, making it challenging to use techniques such as chromatography and other traditional methods to determine the concentration of PCs by separation, individual monitoring and subsequent addition. To address this issue, a facile and on-site strategy was developed to measure the concentration of PCs using a novel nanozyme with polyphenol oxidase-like activity. First, the nanozyme was designed by coordinating the asymmetric ligand nicotinic acid with copper to mimic the structure of mononuclear and trinuclear copper clusters of natural laccases. Subsequently, by introducing 2-mercaptonicotinic acid to regulate the valence state of copper, the composite nanozyme CuNA10S was obtained with significantly enhanced activity. Interestingly, CuNA10S was shown to have a broad substrate spectrum capable of catalyzing common PCs. Building upon the superior performance of this nanozyme, a method was developed to determine the concentration of PCs. To enable rapid on-site sensing, we designed and prepared CuNA10S-based test strips and developed a tailored smartphone sensing platform. Using paper strip sensors combined with a smartphone sensing platform with RGB streamlined the sensing process, facilitating rapid on-site analysis of PCs within a range of 0-100 μM. Our method offers a solution for the quick screening of phenolic wastewater at contaminated sites, allowing sensitive and quick monitoring of PCs without the need for standard samples. This significantly simplifies the monitoring procedure compared to more cumbersome large-scale instrumental methods.

Cu-chelated polydopamine nanozymes with laccase-like activity for photothermal catalytic degradation of dyes

The industrial applications of enzymes are usually hindered by the high production cost, intricate reusability, and low stability in terms of thermal, pH, salt, and storage. Therefore, the de novo design of nanozymes that possess the enzyme mimicking biocatalytic functions sheds new light on this field. Here, we propose a facile one-pot synthesis approach to construct Cu-chelated polydopamine nanozymes (PDA-Cu NPs) that can not only catalyze the chromogenic reaction of 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP), but also present enhanced photothermal catalytic degradation for typical textile dyes. Compared with natural laccase, the designed mimic has higher affinity to the substrate of 2,4-DP with Km of 0.13 mM. Interestingly, PDA-Cu nanoparticles are stable under extreme conditions (temperature, ionic strength, storage), are reusable for 6 cycles with 97 % activity, and exhibit superior substrate universality. Furthermore, PDA-Cu nanozymes show a remarkable acceleration of the catalytic degradation of dyes, malachite green (MG) and methylene blue (MB), under near-infrared (NIR) laser irradiation. These findings offer a promising paradigm on developing novel nanozymes for biomedicine, catalysis, and environmental engineering.

Nanozyme-Enabled Biomedical Diagnosis: Advances, Trends, and Challenges

As nanoscale materials with the function of catalyzing substrates through enzymatic kinetics, nanozymes are regarded as potential alternatives to natural enzymes. Compared to protein-based enzymes, nanozymes exhibit attractive characteristics of low preparation cost, robust activity, flexible performance adjustment, and versatile functionalization. These advantages endow them with wide use from biochemical sensing and environmental remediation to medical theranostics. Especially in biomedical diagnosis, the feature of catalytic signal amplification provided by nanozymes makes them function as emerging labels for the detection of biomarkers and diseases, with rapid developments observed in recent years. To provide a comprehensive overview of recent progress made in this dynamic field, here an overview of biomedical diagnosis enabled by nanozymes is provided. This review first summarizes the synthesis of nanozyme materials and then discusses the main strategies applied to enhance their catalytic activity and specificity. Subsequently, representative utilization of nanozymes combined with biological elements in disease diagnosis is reviewed, including the detection of biomarkers related to metabolic, cardiovascular, nervous, and digestive diseases as well as cancers. Finally, some development trends in nanozyme-enabled biomedical diagnosis are highlighted, and corresponding challenges are also pointed out, aiming to inspire future efforts to further advance this promising field.

Designing Coiled Coils for Heterochiral Complexation to Enhance Binding and Enzymatic Stability

Coiled coils, commonly found in native proteins, are helical motifs important for mediating intermolecular interactions. While coiled coils are attractive for use in new therapies and biomaterials, the lack of enzymatic stability of naturally occurring l-peptides may limit their implementation in biological environments. d-peptides are of interest for biomedical applications as they are resistant to enzymatic degradation and recent reports indicate that stereochemistry-driven interactions, achieved by blending d- and l-peptides, yield access to a greater range of binding affinities and a resistance to enzymatic degradation compared to l-peptides alone. To our knowledge, this effect has not been studied in coiled coils. Here, we investigate the effects of blending heterochiral E/K coiled coils, which are a set of coiled coils widely used in biomaterials. We found that we needed to redesign the coiled coils from a repeating pattern of seven amino acids (heptad) to a repeating pattern of 11 amino acids (hendecad) to make them more amenable to heterochiral complex formation. The redesigned hendecad coiled coils form both homochiral and heterochiral complexes, where the heterochiral complexes have stronger heats of binding between the constituent peptides and are more enzymatically stable than the analogous homochiral complexes. Our results highlight the ability to design peptides to make them amenable to heterochiral complexation, so as to achieve desirable properties like increased enzymatic stability and stronger binding. Looking forward, understanding how to engineer peptides to utilize stereochemistry as a materials design tool will be important to the development of next-generation therapeutics and biomaterials.

Rapid and Green Fabrication of Nanozyme with Geminal CuN3O Configuration for Efficient Catecholase-Mimicking

Fabrication of nanozyme with catecholase-like catalytic activity faces the great challenge of merging outstanding activity with low cost as well as simple, rapid, and low-energy-consumed production, restricting its industrial applications. Herein, an inexpensive yet robust nanozyme (i.e., DT-Cu) via simple one-step coordination between diaminotriazole (DT) and CuSO4 within 1 h in water at room temperature is constructed. The asymmetric dicopper site with CuN3O configuration for each copper as well as Cu─O bond length of ≈1.83 Å and Cu···Cu distance of ≈3.5 Å in DT-Cu resemble those in catechol oxidase (CO), which ensure its prominent intrinsic activity, outperforming most CO-mimicking nanozymes and artificial homogeneous catalysts. The use of inexpensive DT/CuSO4 in this one-pot strategy endows DT-Cu with only ≈20% cost of natural CO per activity unit. During catalysis, O2 experienced a 4e-dominated reduction process accompanied by the formation of 1O2 and H2O2 intermediates and the product of H2O. Benefiting from the low cost as well as the distinctive structure and superior intrinsic activity, DT-Cu presents potential applications ranging from biocatalysis to analytical detection of biomolecules such as epinephrine and beyond.

Approach of a small protein to the biomimetic bis-(μ-oxo) dicopper active-site installed in MOF-808 pores with restricted access perturbs substrate selectivity of oxidase nanozyme

Advances in nanozymes have taken shape over the past few years in several domains. However, persisting challenging limitations of selectivity, specificity, and efficiency necessitate careful attention to aid in the development of next-generation artificial enzymes. Despite nanozymes having significant therapeutic and biotechnological prospects, the multienzyme mimetic activities can compromise their intended applications. Furthermore, the lack of substrate selectivity can hamper crucial biological pathways. While working on addressing the challenges of nanozymes, in this work, we aim to highlight the interplay between the substrates and bis-(μ-oxo) dicopper active site-installed MOF-808 for selectively mimicking oxidase. This oxidase mimetic with a small pore-aperture (1.4 nm), similar to the opening of enzyme binding pockets, projects a tight control over the dynamics and the reactivity of substrates, making it distinct from the general oxidase nanozymes. Interestingly, the design and the well-regulated activity of this nanozyme effectively thwart DNA from approaching the active site, thereby preventing its oxidative damage. Crucially, we also show that despite these merits, the oxidase selectivity is compromised by small proteins such as cytochrome c (Cyt c), having dimensions larger than the pore aperture of MOF-808. This reaction lucidly produces water molecules as a result of four electron transfer to an oxygen molecule. Such unintended side reactivities warrant special attention as they can perturb redox processes and several cellular energy pathways. Through this study, we provide a close look at designing next-generation artificial enzymes that can address the complex challenges for their utility in advanced applications.

Perovskite hydroxide-based laccase mimics with controllable activity for environmental remediation and biosensing

Constructing relatively inexpensive nanomaterials to simulate the catalytic performance of laccase is of great significance in recent years. Although research on improving laccase-like activity by regulating ligands of copper (amino acids or small organic molecules, etc.) have achieved remarkable success. There are few reports on improving laccase-like activity by adjusting the composition of metal Cu. Here, we used perovskite hydroxide AB(OH)6 as a model to evaluate the relationship between Cu based alloys and their laccase-like activity. We found that when the Cu/Mn alloy ratio of the perovskite hydroxide A point is greater than 1, the laccase-like activity of the binary alloy perovskite hydroxide is higher than that of the corresponding single Cu. Based on the measurements of XPS and ICP-MS, we deduced that the improvements of laccase-like activity mainly attribute to the ratio of Cu+/Cu2+and the content of Cu. Moreover, two types of substrates (toxic pollutants and catechol neurotransmitters) were used to successfully demonstrated such nanozymes' excellent environmental protecting function and biosensing property. This work will provide a novel approach for the construction and application of laccase-like nanozymes in the future.

Ultrahigh peroxidase-like catalytic performance of Cu-N4 and Cu-N4S active sites-containing reduced graphene oxide for sensitive electrochemical biosensing

Carbon-based nanozymes possessing peroxidase-like activity have attracted significant interest because of their potential to replace native peroxidases in biotechnology. Although various carbon-based nanozymes have been developed, their relatively low catalytic efficiency needs to be overcome to realize their practical utilization. Here, inspired by the elemental uniqueness of Cu and the doped elements N and S, as well as the active site structure of Cu-centered oxidoreductases, we developed a new carbon-based peroxidase-mimicking nanozyme, single-atom Cu-centered N- and S-codoped reduced graphene oxide (Cu-NS-rGO), which preserved many Cu-N4 and Cu-N4S active sites and showed dramatically high peroxidase-like activity without any oxidase-like activity, yielding up to 2500-fold higher catalytic efficiency (kcat/Km) than that of pristine rGO. The high catalytic activity of Cu-NS-rGO might be attributed to the acceleration of electron transfer from Cu single atom as well as synergistic effects from both Cu-N4 and Cu-N4S active sites, which was theoretically confirmed by Gibbs free energy calculations using density functional theory. The prepared Cu-NS-rGO was then used to construct an electrochemical bioassay system for detecting choline and acetylcholine by coupling with the corresponding oxidases. Using this system, both target molecules were selectively determined with high sensitivity that was sufficient to clinically determine their levels in physiological fluids. Overall, this study will facilitate the development of nanocarbon-based nanozymes and their electrochemical biosensing applications, which can be extended to the development of miniaturized devices in point-of-care testing environments.

Cu,Zn,I-Doped Carbon Dots with Boosted Triple Antioxidant Nanozyme Activity for Treatment of DSS-Induced Colitis

Nanozyme-mediated antioxidative therapy is a promising star for treating a myriad of important diseases through eliminating excessive reactive oxygen species (ROS) such as O2·- and H2O2, a critical mechanism for inflammatory bowel disease (IBD). This work provides a high biocompatibility iodine-copper-zinc covalent doped carbon dots (Cu,Zn,I-CDs) with the catalase (CAT)-, superoxide dismutase (SOD)- and glutathione peroxidase (GPx)-like catalytic activities for treating ulcerative colitis (UC) by scavenging overproduced ROS. We found that I dopant aids in counteracting the positive charge at Cu,Zn dopants brought on by low pH, enabling Cu,Zn,I-CDs to process strong triple antioxidant nanozyme activities rather than Cu,Zn-CDs. Vitro experiments displayed that the Cu,Zn,I-CDs could scavenge the excessive ROS to protect cellular against oxidative stress and reduce the expression of proinflammatory cytokines, such as TNF-α, IL-1β, and IL-6. In sodium dextran sulfate (DSS)-induced colitis mice models, Cu,Zn,I-CDs with excellent biocompatibility could effectively relieve the inflammation of the colon, containing the reduction of the colon length, the damaged epithelium, the infiltration of inflammatory cells, and upregulation of antioxidant genes. Therefore, the therapy of Cu,Zn,I-CD antioxidant nanozymes is an effective approach and provides a novel strategy for UC treatment.

Enhancing the Catalytic Activity of Laccase@Copper-Metal-Organic Framework Nanofractal Microspheres: Synergistic Contribution of the Mass Transfer and Electron Transfer Pathway

Metal-organic frameworks (MOFs) are limited by small pores and buried active sites, and their enzyme-like catalytic activity is still very low. Herein, laccase was employed as the organic component to construct laccase@Cu3(BTC)2 nanofractal microspheres. During the preparation process, laccase adsorbed Cu2+ by electrostatic attractive interaction, then combined with Cu2+ by coordination interaction, and finally induced the in situ growth of H3BTC2 in multiple directions by electrostatic repulsion. Interestingly, electrostatic repulsion was tuned efficiently by adjusting the Cu2+ concentration to obtain laccase@Cu3(BTC)2 nanofractal microspheres (nanosheet microspheres, nanorod microspheres, and nanoneedle microspheres). Laccase@Cu3(BTC)2 nanorod microspheres exhibited the highest catalytic efficiency, which was 14-fold higher than that of smooth microspheres. The mechanism of the improvement of catalytic activity in the degradation of BPA was proposed for the first time. The enhanced catalytic activity depended on the adsorption effect of the nanorod framework and dual cycle synergistic catalysis of Cu+/Cu2+ active sites, which accelerated substrate diffusion and electron transfer. The catalytic mechanism of enzyme@MOF nanofractal microspheres not only deepens our understanding of enzyme and MOF synergistic catalysis but also provides new insights into the design of catalysts.

Transition-Metal-Oxide-Based Nanozymes for Antitumor Applications

Transition metal oxide (TMO)-based nanozymes have appeared as hopeful tools for antitumor applications due to their unique catalytic properties and ability to modulate the tumor microenvironment (TME). The purpose of this review is to provide an overview of the latest progress made in the field of TMO-based nanozymes, focusing on their enzymatic activities and participating metal ions. These nanozymes exhibit catalase (CAT)-, peroxidase (POD)-, superoxide dismutase (SOD)-, oxidase (OXD)-, and glutathione oxidase (GSH-OXD)-like activities, enabling them to regulate reactive oxygen species (ROS) levels and glutathione (GSH) concentrations within the TME. Widely studied transition metals in TMO-based nanozymes include Fe, Mn, Cu, Ce, and the hybrid multimetallic oxides, which are also summarized. The review highlights several innovative nanozyme designs and their multifunctional capabilities. Despite the significant progress in TMO-based nanozymes, challenges such as long-term biosafety, targeting precision, catalytic mechanisms, and theoretical supports remain to be addressed, and these are also discussed. This review contributes to the summary and understanding of the rapid development of TMO-based nanozymes, which holds great promise for advancing nanomedicine and improving cancer treatment.

Chiral CuxCoyS-CuzS Nanoflowers with Bioinspired Enantioselective Catalytic Performances

Nanomaterials with biomimetic catalytic abilities have attracted significant attention. However, the stereoselectivity of natural enzymes determined by their unique configurations is difficult to imitate. In this work, a kind of chiral CuxCoyS-CuzS nanoflowers (L/D-Pen-NFs) is developed, using porous CuxCoyS nanoparticles (NPs) as stamens, CuzS sheets as petals, and chiral penicillamine as surface stabilizers. Compared to the natural laccase enzyme, L/D-Pen-NFs exhibit significant advantages in catalytic efficiency, stability against harsh environments, recyclability, and convenience in construction. Most importantly, they display high enantioselectivity toward chiral neurotransmitters, which is proved by L- and D-Pen-NFs' different catalytic efficiencies toward chiral enantiomers. L-Pen-NFs are more efficient in catalyzing the oxidation of L-epinephrine and L-dopamine compared with D-Pen-NFs. However, their catalytic efficiency in oxidizing L-norepinephrine and L-DOPA is lower than that of D-Pen-NFs. The reason for the difference in catalytic efficiency is the distinct binding affinities between CuxCoyS-CuzS nano-enantiomers and chiral molecules. This work can spur the development of chiral nanostructures with biomimetic functions.

Unveiling the role of inorganic nanoparticles in Earth's biochemical evolution through electron transfer dynamics

This article explores the intricate interplay between inorganic nanoparticles and Earth's biochemical history, with a focus on their electron transfer properties. It reveals how iron oxide and sulfide nanoparticles, as examples of inorganic nanoparticles, exhibit oxidoreductase activity similar to proteins. Termed "life fossil oxidoreductases," these inorganic enzymes influence redox reactions, detoxification processes, and nutrient cycling in early Earth environments. By emphasizing the structural configuration of nanoparticles and their electron conformation, including oxygen defects and metal vacancies, especially electron hopping, the article provides a foundation for understanding inorganic enzyme mechanisms. This approach, rooted in physics, underscores that life's origin and evolution are governed by electron transfer principles within the framework of chemical equilibrium. Today, these nanoparticles serve as vital biocatalysts in natural ecosystems, participating in critical reactions for ecosystem health. The research highlights their enduring impact on Earth's history, shaping ecosystems and interacting with protein metal centers through shared electron transfer dynamics, offering insights into early life processes and adaptations.

A novel hybrid sensor array based on the polyphenol oxidase and its nanozymes combined with the machine learning based dual output model to identify tea polyphenols and Chinese teas

A novel sensor array was developed based on the enzyme/nanozyme hybridization for the identification of tea polyphenols (TPs) and Chinese teas. The enzyme/nanozyme with polyphenol oxidase activity can catalyze the reaction between TPs and 4-aminoantipyrine (4-AAP) to produce differences in color, and the sensor array was thus constructed to accurately identify TPs mixed in different species, concentrations, or ratios. In addition, a machine learning based dual output model was further used to effectively predict the classes and concentrations of unknown samples. Therefore, the qualitative and quantitative detection of TPs can be realized continuously and quickly. Furthermore, the sensor array combining the machine learning based dual output model was also utilized for the identification of Chinese teas. The method can distinguish the six teas series in China, and then precisely differentiate the more specific tea varieties. This study provides an efficient and facile strategy for the identification of teas and tea products.

A novel laccase-like Cu-MOF for colorimetric differentiation and detection of phenolic compounds

The development of convenient, fast, and cost-effective methods for differentiating and detecting common organic pollutant phenols has become increasingly important for environmental and food safety. In this study, a copper metal-organic framework (Cu-MOF) with flower-like morphology was synthesized using 2-methylimidazole (2-MI) as ligands. The Cu-MOF was designed to mimic the natural laccase active site and proved demonstrated excellent mimicry of enzyme-like activity. Leveraging the superior properties of the constructed Cu-MOF, a colorimetric method was developed for analyzing phenolic compounds. This method exhibited a wide linear range from 0.1 to 100 μM with a low limit of detection (LOD) of 0.068 μM. Besides, by employing principal component analysis (PCA), nine kinds of phenols was successfully distinguished and identified. Moreover, the combination of smartphones with RGB profiling enabled real-time, quantitative, and high-throughput detection of phenols. Therefore, this work presents a paradigm and offers guidance for the differentiation and detection of phenolic pollutants in the environment.

pH Modulation of Super-Assembled Heteromembranes for Sustainable Chiral Sensing

Enantioselective sensing and separation represent formidable challenges across a diverse range of scientific domains. The advent of hybrid chiral membranes offers a promising avenue to address these challenges, capitalizing on their unique characteristics, including their heterogeneous structure, porosity, and abundance of chiral surfaces. However, the prevailing fabrication methods typically involve the initial preparation of achiral porous membranes followed by subsequent modification with chiral molecules, limiting their synthesis flexibility and controllability. Moreover, existing chiral membranes struggle to achieve coupled-accelerated enantioseparation (CAE). Here, we report a replacement strategy to controllably produce mesoscale and chiral silica-carbon (MCSC) hybrid membranes that comprise chiral pores by interfacial superassembly on a macroporous alumina (AAO) membrane, in which both ion- and enantiomers can be effectively and selectively transported across the membrane. As a result, the heterostructured hybrid membrane (MCSC/AAO) exhibits enhanced selectivity for cations and enantiomers of amino acids, achieving CAE for amino acids with an isoelectric point (pI) exceeding 7. Interestingly, the MCSC/AAO system demonstrates enhanced pH-sensitive enantioseparation compared to chiral mesoporous silica/AAO (CMS/AAO) with significant improvements of 78.14, 65.37, and 14.29% in the separation efficiency, separation factor, and permeate flux, respectively. This work promises to advance the synthesis of two or more component-integrated chiral nanochannels with multifunctional properties and allows a better understanding of the origins of the homochiral hybrid membranes.

Nanozymes with biomimetically designed properties for cancer treatment

Nanozymes, as a type of nanomaterials with enzymatic catalytic activity, have demonstrated tremendous potential in cancer treatment owing to their unique biomedical properties. However, the heterogeneity of tumors and the complex tumor microenvironment pose significant challenges to the in vivo catalytic efficacy of traditional nanozymes. Drawing inspiration from natural enzymes, scientists are now using biomimetic design to build nanozymes from the ground up. This approach aims to replicate the key characteristics of natural enzymes, including active structures, catalytic processes, and the ability to adapt to the tumor environment. This achieves selective optimization of nanozyme catalytic performance and therapeutic effects. This review takes a deep dive into the use of these biomimetically designed nanozymes in cancer treatment. It explores a range of biomimetic design strategies, from structural and process mimicry to advanced functional biomimicry. A significant focus is on tweaking the nanozyme structures to boost their catalytic performance, integrating them into complex enzyme networks similar to those in biological systems, and adjusting functions like altering tumor metabolism, reshaping the tumor environment, and enhancing drug delivery. The review also covers the applications of specially designed nanozymes in pan-cancer treatment, from catalytic therapy to improved traditional methods like chemotherapy, radiotherapy, and sonodynamic therapy, specifically analyzing the anti-tumor mechanisms of different therapeutic combination systems. Through rational design, these biomimetically designed nanozymes not only deepen the understanding of the regulatory mechanisms of nanozyme structure and performance but also adapt profoundly to tumor physiology, optimizing therapeutic effects and paving new pathways for innovative cancer treatment.