Development of an Inner Filter Effects-Based Upconversion Nanoparticles-Curcumin Nanosystem for the Sensitive Sensing of Fluoride Ion

Novel D-π-A hemicyanine dye as photoinitiators for in situ hydrogel formation and DLP printing

The field of biofabrication imposes stringent requirements on the polymerization activity and biosafety of photopolymeric hydrogel systems. In this investigation, we designed and synthesized four hemicyanine dyes with a D-π-A structure specifically tailored for biofabrication purposes. These novel dyes, incorporating carbazole (CZ), triphenylamine (TPA), anthracene (AN), and benzodithiophene (BDT) as electron donors, along with heterocyclic salt (IN) as electron acceptors, were prepared using a straightforward synthesis method. The absorption maxima of ANIN, CZIN, and TPAIN exceeded 500 nm, rendering them suitable co-initiators for the free radical photopolymerization of acrylates under green-red light exposure facilitated by light-emitting diodes (LEDs) and the co-initiator iodonium salt (ION). Notably, CZIN and TPAIN, due to their robust dye absorption and efficient electron transfer to ION, functioned as high-performance photosensitizers. Meanwhile, BDTIN, with its strong and broad absorption range (400-600 nm), enhanced the accuracy of visible light photopolymerization. These dyes exhibit characteristics such as facile synthesis, heightened photo stability, and non-toxicity and also demonstrate the ability to discern the alkalinity of a solution to some extent. Furthermore, we explored the application of these hemicyanine dyes in 3D printing, showing potential to enhance printing resolution in DLP 3D printing (digital light process 3D printing).

Construction of a Multifunctional Upconversion Nanoplatform Based on Autophagy Inhibition and Photodynamic Therapy Combined with Chemotherapy for Antitumor Therapy

Inhibition of autophagy increases the sensitivity of tumor cells to radiotherapy and chemotherapy and improves the therapeutic effect on tumors. Recently, photodynamic therapy (PDT) combined with chemotherapy has been proven to further improve the efficiency of cancer treatment. As such, combining autophagy inhibition with PDT and chemotherapy may represent a potentially effective new strategy for cancer treatment. However, currently widely studied autophagy inhibitors inevitably produce various toxic side effects due to their inherent pharmacological activity. To overcome this constraint, in this study, we designed an ideal multifunctional upconversion nanoplatform, UCNP-Ce6-EPI@mPPA + NIR (MUCEN). Control, UCNP-EPI@mPPA (MUE), UCNP-EPI@mPPA + NIR (MUEN), Ce6-EPI@mPPA (MCE), Ce6-EPI@mPPA + NIR (MCEN), and UCNP-Ce6-EPI@mPPA (MUCE) groups were set up separately as controls. Based on a combination of autophagy inhibition and PDT, the average particle size of MUCEN was 197 nm, which can simultaneously achieve the double encapsulation of chlorine e6 (Ce6) and epirubicin (EPI). In vitro tests revealed that MUCE was efficiently endocytosed by 4T1 cells under near-infrared light irradiation. Further, in vivo tests revealed that MUCE dramatically inhibited tumor growth. Immunohistochemistry results indicated that MUCE efficiently increased the expression of autophagy inhibitors p62 and LC3 in tumor tissues. The synergistic effect of autophagy inhibition and PDT with MUCE exhibited superior tumor suppression, providing an innovative approach to cancer treatment.

A smartphone-assisted sensing hydrogels based on UCNPs@SiO2-phenol red nanoprobes for detecting the pH of aquatic products

For some aquatic products, pH has been considered a useful index to reflect the changes in materials during the loss of freshness. Based on the inner filter effect (IFE) between deprotonated phenol red (PR) and upconversion nanoparticles (UCNPs), UCNPs coated with PR-doped SiO2 shell were embedded in agarose hydrogel to develop a smartphone-assisted method for pH sensing. With the enhancement of pH response using a phase transfer agent (i.e., tetra butyl ammonium hydroxide, TBAH), the proposed senor realized the colorimetric and fluorescence detection of pH in the range of pH 6.6-8 and pH 6-8, respectively. The sensor also showed satisfied reversibility when switched between pH 6 and 8 for at least 5 cycles. Moreover, this sensor displayed great sensitivity, stability, and portability in analyzing actual fish, shrimp, and shellfish samples, providing a new sight for evaluating the freshness of aquatic products.

Highly sensitive detection for xanthine by combining single-band red up-conversion nanoparticles and cycle signal amplification strategy based on internal filtration effect

Up-conversion nanoparticles (UCNPs), especially single-band bright red UCNPs, have better penetration of biological tissues, absorb less lost energy, and have higher sensitivity and accuracy in the determination of actual biological samples in the field of biosensing. Here, a novel colorimetric and fluorescent dual-channel method based upon an internal filtration effect (IFE) quenching mechanism was proposed for the quantitative analysis of xanthine (XA) by using red UCNPs as fluorescence indicator and 3,3',5,5' -tetramethylbenzidine (TMB) as chromogenic substrate. The sensitivity of the detection system was also enhanced by a cycle signal amplification strategy based on the Fenton reaction. Under the best conditions, the detection limits of XA by fluorescent and colorimetric methods were 0.58 μM and 1.19 μM, respectively. The developed method was applied to the detection of XA in actual serum samples, and the recoveries of the spiked samples by fluorescent and colorimetric methods were in the range of 96.3-104.3 % and 94.3-105.4 %, respectively. In addition, the commercial ELISA method was used to verify the application of the proposed method and the test results of XA were close to those obtained by fluorescent and colorimetric methods, indicating that the accuracy of the developed nanosensing system was acceptable.

A point-of-care aptasensor based on the upconversion nanoparticles/MoS2 FRET system for the detection of Pseudomonas aeruginosa infection

The rapid detection of Pseudomonas aeruginosa (P. aeruginosa) is of great significance for the diagnosis of medical infection. In view of the above, a novel aptasensor based on fluorescence resonance energy transfer (FRET) was developed. It contained aptamer-coupled upconversion nanoparticles (UCNPs-apt) as a donor (excitation 980 nm) and molybdenum disulfide (MoS2) nanosheets as an acceptor. The upconversion fluorescence aptamer system was investigated to obtain the optimal parameters of MoS2 concentration, the incubation time of UCNPs-apt/MoS2 and P. aeruginosa, and pH. Based on the optimal parameters, a linear calibration equation (emission 654 nm) with a wide detection range 8.7 × 10 ~ 8.7 × 107 cfu/mL, a high coefficient of determination R2 0.9941, and a low limit of determination (LOD) 15.5 cfu/mL were established. The method was validated with P. aeruginosa infected foci of mouse wound. The advantage of this aptasensor is that analysis results can be obtained  within 1.5 h, which was much faster than that of the standard method (18-24 h). Furthermore, combined with a portable instrument, it can be used as a point-of-care testing for the early detection of P. aeruginosa infection, which is useful for selecting the correct antibiotics to achieve good therapeutic effects. Additionally, it also has a broad application prospect in food and environmental areas.

Recent advances in rare earth ion-doped upconversion nanomaterials: From design to their applications in food safety analysis

The misuse of chemicals in agricultural systems and food production leads to an increase in contaminants in food, which ultimately has adverse effects on human health. This situation has prompted a demand for sophisticated detection technologies with rapid and sensitive features, as concerns over food safety and quality have grown around the globe. The rare earth ion-doped upconversion nanoparticle (UCNP)-based sensor has emerged as an innovative and promising approach for detecting and analyzing food contaminants due to its superior photophysical properties, including low autofluorescence background, deep penetration of light, low toxicity, and minimal photodamage to the biological samples. The aim of this review was to discuss an outline of the applications of UCNPs to detect contaminants in food matrices, with particular attention on the determination of heavy metals, pesticides, pathogenic bacteria, mycotoxins, and antibiotics. The review briefly discusses the mechanism of upconversion (UC) luminescence, the synthesis, modification, functionality of UCNPs, as well as the detection principles for the design of UC biosensors. Furthermore, because current UCNP research on food safety detection is still at an early stage, this review identifies several bottlenecks that must be overcome in UCNPs and discusses the future prospects for its application in the field of food analysis.

Development of an Fe2+ sensing system based on the inner filter effect between upconverting nanoparticles and ferrozine

The ferrozine (FZ) assay is a vital oxidation state-specific colorimetric assay for the quantification of Fe2+ ions in environmental samples due to its sharp increase in absorbance at 562 nm upon addition of Fe2+. However, it has yet to be applied to corresponding fluoresence assays which typically offer higher sensitivites and lower detection limits. In this article we present for the first time its pairing with upconverting luminescent nanomaterials to enable detection of Fe2+via the inner filter effect using a low-power continuous wave diode laser (45 mW). Upon near infra-red excitation at 980 nm, the overlap of the upconversion emission of Er3+ at approximately 545 nm and the absorbance of the FZ:Fe2+ complex at 562 nm enabled measurement in the change of UCNP emission response as a function of Fe2+ concentration in a ratiometric manner. We first applied large, ultra-bright poly(acrylic acid) (PAA)-capped Gd2O2S:Yb3+,Er3+ UCNPs upconverting nanoparticles (UCNPs) for the detection of Fe2+ using FZ as the acceptor. The probe displayed good selectivity and sensitivity for Fe2+, with a low limit of detection (LoD) of 2.74 μM. Analogous results employing smaller (31 nm) PAA-capped hexagonal-phase NaYF4:Yb3+,Er3+ UCNPs synthesised in our lab were achieved, with a lower LoD towards Fe2+ of 1.43 μM. These results illustrate how the ratiometric nature of the system means it is applicable over a range of particle sizes, brightnesses and nanoparticle host matrices. Preliminary investigations also found the probes capable of detecting micromolar concentrations of Fe2+ in turbid solutions.

Highly sensitive and ratiometric detection of nitrite in food based on upconversion-carbon dots nanosensor

Nitrite (NO₂^-) is extensively found in the daily dietary environment. However, consuming too much NO₂^- can pose serious health risks. Thus, we designed a NO₂^--activated ratiometric upconversion luminescence (UCL) nanosensor which could realize NO₂^- detection via the inner filter effect (IFE) between NO₂^--sensitive carbon dots (CDs) and upconversion nanoparticles (UCNPs). Due to the exceptional optical properties of UCNPs and the remarkable selectivity of CDs, the UCL nanosensor exhibited a good response to NO₂^-. By taking advantage of NIR excitation and ratiometric detection signal, the UCL nanosensor could eliminate the autofluorescence thereby increasing the detection accuracy effectively. Additionally, the UCL nanosensor proved successful in detecting NO₂^- quantitatively in actual samples. The UCL nanosensor provides a simple as well as sensitive sensing strategy for NO₂^- detection and analysis, which is anticipated to extend the utilization of upconversion detection in food safety.

Polychromatic fluorescent MoS2 quantum dots: fabrication and off-on sensing for fluorine ions in water

Recently, MoS₂ quantum dots (QDs) have receive widespread attention as a promising luminescent material. However, so far, little effort has been made on the multicolor emission of MoS₂ QDs. Herein, an in situ iodine doping strategy is presented and used to synthesize tunable-photoluminescent (PL) MoS₂ QDs. By fine iodine doping, the PL of the MoS₂ QDs (I-MoS₂ QDs) can be tuned in the range from 423 nm to 529 nm, which exceeds the as-reported emission wavelength range. Studies using controlled experiments and density functional theory (DFT) reveal that the change in electronic state of MoS₂ QDs is responsible for the changing PL due to iodine doping. As-synthesized I-MoS₂ QDs combined with Fe³⁺ is developed as a "turn-off-on" fluorescence sensor for F^- ions in water. The fluorescence probe has a fine linear response to F^- ions in the concentration range of 2.5-80 μM, and the limit of detection is 1.4 μM (S/N = 3).

Ratiometric upconversion luminescence nanoprobes from construction to sensing, imaging, and phototherapeutics

In terms of the combined advantages of upconversion luminescence (UCL) properties and dual-signal ratiometric outputs toward specific targets, the ratiometric UCL nanoprobes exhibit significant applications. This review summarizes and discusses the recent advances in ratiometric UCL nanoprobes, mainly including the construction of nanoprobe systems for sensing, imaging, and phototherapeutics. First, the construction strategies are introduced, involving different types of nanoprobe systems, construction methods, and ratiometric dual-signal modes. Then, the sensing applications are summarized, involving types of targets, sensing mechanisms, sensing targets, and naked-eye visual detection of UCL colors. Afterward, the phototherapeutic applications are discussed, including bio-toxicity, bio-distribution, biosensing, and bioimaging at the level of living cells and small animals, and biomedicine therapy. Particularly, each section is commented on by discussing the state-of-the-art relevant studies on ratiometric UCL nanoprobe systems. Moreover, the current status, challenges, and perspectives in the forthcoming studies are discussed. This review facilitates the exploration of functionally luminescent nanoprobes for excellent sensing, imaging, biomedicine, and multiple applications in significant fields.

Dual-mode colorimetric and fluorescence sensing system for the detection of captopril based on Fe/NC nanozymes and carbon dots

Metal nitrogen-doped carbon (MNC) nanozymes have received increasing attention in bio-catalysis filed due to adequate catalytic activity, outstanding stability and reusability. Herein, the Fe/NC nanozymes (Fe/NC NZs) with peroxidase-like activity was successfully synthesized and a fluorescence turn on and colorimetric dual-mode sensing system was developed for quantification of captopril (CP) based on Fe/NC NZs and orange-emitting carbon dots (O-CDs). The Fe/NC NZs as an enzyme mimic can efficiently catalyze the 3,3',5,5'-tetramethylbenzidine (TMB) chromogenic reaction, forming blue-colored oxidized TMB product (oxTMB) with the presence of H₂O₂, leading to the fluorescence quenching of O-CDs simultaneously via the inner filter effect (IFE). When CP was present, the blue oxTMB was reduced to colorless TMB, resulting in the inhibition of IFE and the recovery of fluorescence of O-CDs. The fluorescence increase of O-CDs and absorbance decrease of oxTMB depended on CP concentration. Good linear relationships of fluorescence and colorimetric sensing towards CP were obtained in the range from 1 to 50 μM, and the detection limits were 0.47 and 0.56 μM, respectively. Moreover, this as-constructed dual-mode sensor was used to detect CP in pharmaceutical products with satisfactory results.

A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Near-infrared-excited upconversion nanoparticles (UCNPs) have multicolor emissions, a low auto-fluorescence background, a high chemical stability, and a long fluorescence lifetime. The fluorescent probes based on UCNPs have achieved great success in the analysis of different samples. Here, we presented the research results of UCNPs probes utilized in analytical applications including environment, biology, food and medicine in the last five years; we also introduced the design and construction of upconversion optical sensing platforms. Future trends and challenges of the UCNPs used in the analytical field have also been discussed with particular emphasis.

An aptasensor for ampicillin detection in milk by fluorescence resonance energy transfer between upconversion nanoparticles and Au nanoparticles

This paper reports a portable fluorescence resonance energy transfer (FRET) aptasensor for ampicillin (Amp) detection using upconversion particles (UCNPs) as energy donors and Au nanoparticles (AuNPs) as energy acceptors. The optimal parameters of the detection system were investigated. Under the optimal conditions, it had a good linear relationship between the fluorescence intensities and Amp concentrations, a high coefficient of determination (R2) of 0.9939, a wide detection range of 10-100 ng/mL, and a low limit of detection (LOD) of 3.9 ng/mL; meanwhile, the aptasensor had high selectivity for Amp against the interference of other antibiotics, and had good recovery and repeatability. Also, its detection performance had been successfully validated by milk samples. Therefore, the developed aptasensor based on FRET between UCNPs and AuNPs has a good prospect for Amp on-site detection in milk with a portable upconversion detection instrument.

Inner filter effect-based upconversion fluorescence sensing of sulfide ions

Upconversion nanocrystals (UCNCs) have emerged as a new type of fluorescent probe for sensing applications. Herein, we designed a 980 nm excited upconversion luminescence system, composed of core-shell-structured NaYF₄ : Yb,Er@NaYF₄ : Yb nanocrystals (csUCNCs) and the triethylenetetramine-Cu complex (complex-I), for quantitative detection of sulfide ions. Taking advantage of the specific recognition of complex-I toward S^2-, the as-formed compound (complex-II) exhibits excellent spectral overlap not only in the range of fluorescence emissions of UCNCs but also in the excitation wavelength for UCNCs; fluorescence quenching of UCNCs occurs where the complex-II acts as the energy acceptor. Due to the electrostatic repulsion between positively charged ligand-free csUCNCs and complex-I, the fluorescence quenching is based on the primary and secondary inner filter effect rather than the fluorescence resonance energy transfer process. The detection limit of S^2- for the upconversion-based system is calculated to be 2.7 μM, exhibiting higher detection sensitivity over the single complex-I compound measured by the spectrophotometric method. Moreover, no significant variation in upconversion luminescence is observed upon the addition of other interfering ions, showing the excellent selectivity of this nanoprobe toward S^2-.

Wearable Natural Rubber Latex Gloves with Curcumin for Torn Glove Detection in Clinical Settings

Glove tear or perforation is a common occurrence during various activities that require gloves to be worn, posing a significant risk to the wearer and possibly others. This is vitally important in a clinical environment and particularly during surgical procedures. When a glove perforation occurs (and is noticed), the glove must be replaced as soon as possible; however, it is not always noticeable. The present article is focused on the design and development of a novel fluorescence-based sensing mechanism, which is integrated within the glove topology, to help alert the wearer of a perforation in situ. We hypothesized that natural rubber gloves with curcumin infused would yield fluorescence when the glove is damaged, particularly when torn or punctured. The glove design is based on double-dipping between Natural Rubber Latex (NRL) and an inner layer of latex mixed with curcumin, which results in a notable bright yellow-green emission when exposed to UV light. Curcumin (Cur) is a phenolic chemical found primarily in turmeric that fluoresces yellowish-green at 525 nm. The tear region on the glove will glow, indicating the presence of a Cur coating/dipping layer beneath. NRL film is modified by dipping it in a Cur dispersion solution mixed with NRL for the second dipping layer. Using Cur as a filler in NRL also has the distinct advantage of allowing the glove to be made stronger by evenly distributing it throughout the rubber phase. Herein, the optimized design is fully characterized, including physicochemical (fluorescence emission) and mechanical (tensile and tear tests) properties, highlighting the clear potential of this novel and low-cost approach for in situ torn glove detection.

Applications of upconversion nanoparticles in analytical and biomedical sciences: a review

Lanthanide-doped upconversion nanoparticles (UCNPs) have gained more attention from researchers due to their unique properties of photon conversion from an excitation/incident wavelength to a more suitable emission wavelength at a designated site, thus improving the scope in the life sciences field. Due to their fascinating and unique optical properties, UCNPs offer attractive opportunities in theranostics for early diagnostics and treatment of deadly diseases such as cancer. Also, several efforts have been made on emerging approaches for the fabrication and surface functionalization of luminescent UCNPs in optical biosensing applications using various infrared excitation wavelengths. In this review, we discussed the recent advancements of UCNP-based analytical chemistry approaches for sensing and theranostics using a 980 nm laser as the excitation source. The key analytical merits of UNCP-integrated fluorescence analytical approaches for assaying a wide variety of target analytes are discussed. We have described the mechanisms of the upconversion (UC) process, and the application of surface-modified UCNPs for in vitro/in vivo bioimaging, photodynamic therapy (PDT), and photothermal therapy (PTT). Based on the latest scientific achievements, the advantages and disadvantages of UCNPs in biomedical and optical applications are also discussed to overcome the shortcomings and to improve the future study directions. This review delivers beneficial practical information of UCNPs in the past few years, and insights into their research in various fields are also discussed precisely.

Lateral flow assay applied to pesticides detection: recent trends and progress

Devices based on lateral flow assay (LFA) have been gaining more and more space in the detection market mainly due to their simplicity, speed, and low cost. These devices have excellent sensing format versatility and make these strips an ideal choice for field applications. The COVID-19 pandemic boosted the democratization of this method as a "point of care testing" (POCT), and the trend is that these devices become protagonists for the monitoring of pesticides in the environment. However, designing LFA devices for detecting and monitoring pesticides in the environment is still a challenge. This is because analytes are small molecules and have only one antigenic determinant, which makes it difficult to apply direct immunoassays. Furthermore, most LFA devices provide only qualitative or semi-quantitative results and have a limited number of applications in multi-residue analysis. Here, we present the state of the art on the use of LFA in the environmental monitoring of pesticides. Based on well-documented results, we review all available LFA formats and strategies for pesticide detection, which may have important implications for the future of monitoring pesticides in the environment. The main advances, challenges, and perspectives of these devices for a direction in this field of study are also presented.

Phone Camera Nano-Biosensor Using Mighty Sensitive Transparent Reusable Upconversion Paper

Lycopene, a natural colorant and antioxidant with a huge growing market, is highly susceptible to photo/thermal degradation, which demands real-time sensors. Hence, here a transparent upconversion nanoparticles (UCNPs) strip having 30 mol % Yb, 0.1 mol % Tm, and β-NaYF4 UCNPs, which shows an intense emission at 475 nm, has been developed. This strip has been found to be sensitive to lycopene with a detection limit as low as 10 nM using a smartphone camera, which is due to static quenching that is confirmed by the lifetime study. In comparison to previous paper strips, here the transparent strip has minimal scattering with maximum sensitivity in spite of not using any metal quenchers. An increase in strip hydrophobicity during the fabrication process complements the strip to selectively permeate and present an extraction-free substitute analysis for chromatography. Hydrophobicity endows the strip with the capability to reuse the strip with ∼100% luminescence recovery.

Curcumin Is an Iconic Ligand for Detecting Environmental Pollutants

The rapid increase in industrial revolution and the consequent environmental contamination demands continuous monitoring and sensitive detection of the pollutants. Nanomaterial-based sensing system has proved to be proficient in sensing environmental pollutants. The development of novel ligands for enhancing the sensing efficiency of nanomaterials has always been a challenge. However, the amendment of nanostructure with molecular ligand increases the sensitivity, selectivity, and analytical performance of the resulting novel sensing platform. Organic ligands are capable of increasing the adsorption efficacy, optical properties, and electrochemical properties of nanomaterials by reducing or splitting of band gap. Curcumin (diferuloylmethane) is a natural organic ligand that exhibits inherent fluorescence and electrocatalytic property. Due to keto-enol tautomerism, it is capable of giving sensitive signals such as fluorescence, luminescence, ultraviolet absorption shifts, and electrochemical data. Curcumin probes were also reported to give enhanced meterological performances, such as low detection limit, repeatability, reproducibility, high selectivity, and high storage stability when used with nanosystem. Therefore, research on curcumin-modified nanomaterials in the detection of environmental pollution needs a special focus for prototype and product development to enable practical use. Hence, this article reviews the role of curcumin as a natural fluorophore in optical and electrochemical sensing of environmentally significant pollutants. This review clearly shows that curcumin is an ideal candidate for developing and validating nanomaterials-based sensors for the detection of environmental pollutants such as arsenic, lead, mercury, boron, cyanide, fluoride, nitrophenol, trinitrotoluene, and picric acid and toxic gases such as ammonia and hydrogen chloride. This review will afford references for future studies and enable researchers to translate the lab concepts into industrial products.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

Chromaticity Evolutionary Detection of Food Contaminant Semicarbazide through an Upconversion Luminescence-Based Nanosensor

Semicarbazide (SEM) is a widespread carcinogenic and neurotoxic food contaminant, originating from the metabolite of antibiotic nitrofurazone, which is used in aquaculture, or thermal decomposition byproduct of a flour blowing agent azodicarbonamide. Although optical detection technologies are powerful tools considering the advantages of fast response and visualization detection, there are few optical nanosensors for highly sensitive and visual assays of SEM due to no luminescence response and UV absorbance of SEM. Herein, an upconversion luminescence (UCL)-based nanosensor was designed for visual detection of SEM with high sensitivity and good selectivity. The nanosensor was constructed by combining upconversion nanoparticles (UCNPs) and phosphomolybdic acid (PMA), which was used as the specific recognition element of SEM. The developed nanosensor exhibited selective absorbance enhancement and UCL quenching behavior with the addition of SEM based on the inner filter effect (IFE). Since the change in absorbance translated into an exponential change in the luminescence, the sensitivity of the nanosensor was greatly improved. The nanosensor realized a highly sensitive and visual response to SEM in the linear range of 0.5-16 μM with a low limit of detection of 58 nM. Moreover, satisfactory recovery values ranging from 90 to 112% in spiked real samples indicated the practical applicability of the nanosensor. The nanosensor designed here provides a sensitive and convenient sensing strategy for visual detection of hazardous substances and is expected to develop the upconversion sensing application in food safety.

Upconversion nanoparticles/carbon dots (UCNPs@CDs) composite for simultaneous detection and speciation of divalent and trivalent iron ions

In this study, the application of carbon dots (CDs) modified NaYF₄:Yb, Er nanoparticles (UCNPs@CDs) as the fluorescent nanoprobe for simultaneous detection of Fe²⁺ and Fe³⁺ was investigated. Fe³⁺ quantification (5-80 μmol L^-1) was achieved, as a result of Fe³⁺ induced fluorescence quenching of UCNPs@CDs at 434 nm (under the 336 nm excitation). The chelate (Fe²⁺-phen) formed by Fe²⁺ and 1,10-phenanthroline had a broad absorption centered at 510 nm, due to inner filter effect (IFE), Fe²⁺ quantification (4-120 μmol L^-1) was achieved as a result of (Fe²⁺-phen) induced fluorescence quenching of UCNPs@CDs at 545 nm (under the 980 nm excitation). The resultant UCNPs@CDs probe, with excellent anti-interference capability, favorable fluorescence stability, and convincing performance in real sample analysis, showed promising application in simultaneous detection of Fe²⁺ and Fe³⁺.

Exploring the use of upconversion nanoparticles in chemical and biological sensors: from surface modifications to point-of-care devices

Upconversion nanoparticles (UCNPs) have emerged as promising luminescent nanomaterials due to their unique features that allow the overcoming of several problems associated with conventional fluorescent probes. Although UCNPs have been used in a broad range of applications, it is probably in the field of sensing where they best evidence their potential. UCNP-based sensors have been designed with high sensitivity and selectivity, for detection and quantification of multiple analytes ranging from metal ions to biomolecules. In this review, we deeply explore the use of UCNPs in sensing systems emphasizing the most relevant and recent studies on the topic and explaining how these platforms are constructed. Before diving into UCNP-based sensing platforms it is important to understand the unique characteristics of these nanoparticles, why they are attracting so much attention, and the most significant interactions occurring between UCNPs and additional probes. These points are covered over the first two sections of the article and then we explore the types of fluorescent responses, the possible analytes, and the UCNPs' integration with various material types such as gold nanostructures, quantum dots and dyes. All the topics are supported by analysis of recently reported sensors, focusing on how they are built, the materials' interactions, the involved synthesis and functionalization mechanisms, and the conjugation strategies. Finally, we explore the use of UCNPs in paper-based sensors and how these platforms are paving the way for the development of new point-of-care devices.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Smartphone as a simple device for visual and on-site detection of fluoride in groundwater

Developing a portable device for visual and on-site detection of fluoride in groundwater is highly anticipated. In this paper, 2-(tert-butyl-diphenylsilanyloxy)-5-nitro-1H-benzoimidazole (1) has been rationally designed via a silanization reaction for self-calibration detection of fluoride, and the detection limit was calculated as 0.11 μM. The contact of 1 with fluoride would induce the cleavage of Si-O bond and trigger the emergence of excited state intramolecular proton transfer (ESIPT) process, and then the enol-like emission at 437 nm decreased accompanying with the increase of keto-like tautomerism emission at 550 nm. More importantly, considering the demand of field detection for fluoride in groundwater and combining the function of smartphone to obtain the chroma of photos. The chroma value of the fluorescence color changes from blue to yellow could be conveniently determined through a color recognizer application installed in smartphone. The device can accurately reflect the concentration of fluoride by analyzing the chroma value. The test in actual water samples confirmed that the simple device based on smartphone could be used efficiently for visual, on-site and accurate detection of fluoride in groundwater.

Blue/yellow emissive carbon dots coupled with curcumin: a hybrid sensor toward fluorescence turn-on detection of fluoride ion

Trace detection of fluoride ion has gained increasing attention due to fluoride's close association with biological and environmental processes. Herein, we construct a novel hybrid nanosystem consisting of carbon dots and curcumin for sensitive and selective sensing of F^-. Carbon dots are synthesized by hydrothermal treatment of 2,3-diaminopyridine and selenourea in hydrochloric acid. This material is employed as the fluorescent indicator that exhibits intense blue and yellow emission with quantum yields of 12% and 33%, respectively. Curcumin, possessing an absorption peak at 532 nm, can significantly quench the yellow fluorescence of carbon dots through inner filter effect. Curcumin is also used to specifically recognize F^-. When F^- is added, the curcumin-F^- complex generates, which leads to the hypochromatic shift of the absorption band from 532 to 430 nm. In such a case, the inner filter effect reduces, and yellow fluorescence of carbon dots recovers. Thus, a fluorescence turn-on sensor of F^- is built based on the carbon dots/curcumin system. The limits of detection and quantitation are measured to be 0.39 and 1.30 μM, respectively. For real usage, the proposed method is applied to determinate F^- in tap water and milk samples with relative standard deviations below 7.9%.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

A hybrid upconversion nanoprobe for ratiometric detection of aliphatic biogenic amines in aqueous medium

We fabricated an inorganic-organic hybrid upconversion nanoprobe for the ratiometric detection of aliphatic biogenic amines in water. The hybrid nanoprobe comprises a thiophene-based acceptor-π-donor-π-acceptor organic fluorescent dye, TDPM, and near-infrared light-absorbing upconversion nanoparticles (UCNPs). The organic dye was loaded into a mesoporous silica-coated UCNP (UCNP@mSiO2) matrix to circumvent the issues of water insolubility and higher energy excitation. Yb3+ and Tm3+-doped UCNPs exhibited dual emission bands at 475 and 645 nm upon excitation with a 980 nm laser. The significant spectral overlap between the absorption and the emission bands of TDPM and UCNPs, respectively, at 475 nm led to resonance energy transfer (RET) from the UCNPs to TDPM resulting in the quenching of the UCNP emission. In contrast, 'turn-on' emission was noticeable with the addition of aliphatic biogenic amines due to an inhibition of the RET. The emission at 645 nm remained unaffected during the energy transfer process making the hybrid probe a versatile platform for the ratiometric detection of different aliphatic biogenic amines. Furthermore, we explored the sensing of aliphatic biogenic amines in adulterated milk and rotten fish. The unique material attributes demonstrated in the current study hold promise for further development of real-time sensors and switches based on hybrid upconversion nanoprobes.

Biosensing based on upconversion nanoparticles for food quality and safety applications

Food safety and quality regulations inevitably call for sensitive and accurate analytical methods to detect harmful contaminants in food and to ensure safe food for the consumer. Both novel and well-established biorecognition elements, together with different transduction schemes, enable the simple and rapid analysis of various food contaminants. Upconversion nanoparticles (UCNPs) are inorganic nanocrystals that convert near-infrared light into shorter wavelength emission. This unique photophysical feature, along with narrow emission bandwidths and large anti-Stokes shift, render UCNPs excellent optical labels for biosensing because they can be detected without optical background interferences from the sample matrix. In this review, we show how this exciting technique has evolved into biosensing platforms for food quality and safety monitoring and highlight recent applications in the field.

Upconversion-based nanosystems for fluorescence sensing of pH and H2O2

Hydrogen peroxide (H₂O₂), a key reactive oxygen species, plays an important role in living organisms, industrial and environmental fields. Here, a non-contact upconversion nanosystem based on the excitation energy attenuation (EEA) effect and a conventional upconversion nanosystem based on the joint effect of EEA and fluorescence resonance energy transfer (FRET) are designed for the fluorescence sensing of H₂O₂. We show that the upconversion luminescence (UCL) is quenched by MoO_3-x nanosheets (NSs) in both systems due to the strong absorbance of MoO_3-x NSs in the visible and near-infrared regions. The recovery in UCL emissions upon addition of H₂O₂ enables quantitative monitoring of H₂O₂. Benefiting from the non-contact method, hydrophobic OA-NaYF₄:Yb,Er can be used as the luminophore directly and ultrahigh quenching efficiency (99.8%) is obtained. Moreover, the non-contact method exhibits high sensitivity toward H₂O₂ with a detection limit of 0.63 μM, which is lower than that determined by simple spectrophotometry (0.75 μM) and conventional upconversion-based nanocomposites (9.61 μM). As an added benefit, the same strategy can be applied to the sensing of pH, showing a broad pH-responsive property over a range of 2.6 to 8.2. The successful preparation of different upconversion-based nanosystems for H₂O₂ sensing using the same material as the quencher provides a new design strategy for fluorescence sensing of other analytes.

Lowest aqueous picomolar fluoride ions and in vivo aluminum toxicity detection by an aluminum(iii) binding chemosensor

Aluminum toxicity in biological systems is a well-known issue yet remains as a prevalent and unsolvable problem due to the lack of proper molecular tools that can detect free aluminum(iii) or Al(iii) ions in vivo. Herein, we report a water-soluble photo-induced electron transfer (PET)-based turn-ON/OFF fluorometric chemosensor for the dual detection of Al(iii) and fluoride ions in aqueous media with a nanomolar (∼1.7 × 10^-9 M) and picomolar (∼2 × 10^-12 M, lowest ever detection so far) detection limit, respectively. Fluoride ions in sea water could be detected as well as the recognition of non-contamination in drinking water. In addition, using live-cell microscopy, Al(iii) ions were detected in live biological samples in vivo to aid establishing the aluminum-toxicity effect.

Phytochemicals toward Green (Bio)sensing

Because of numerous inherent and unique characteristics of phytochemicals as bioactive compounds derived from plants, they have been widely used as one of the most interesting nature-based compounds in a myriad of fields. Moreover, a wide variety of phytochemicals offer a plethora of fascinating optical and electrochemical features that pave the way toward their development as optical and electrochemical (bio)sensors for clinical/health diagnostics, environmental monitoring, food quality control, and bioimaging. In the current review, we highlight how phytochemicals have been tailored and used for a wide variety of optical and electrochemical (bio)sensing and bioimaging applications, after classifying and introducing them according to their chemical structures. Finally, the current challenges and future directions/perspective on the optical and electrochemical (bio)sensing applications of phytochemicals are discussed with the goal of further expanding their potential applications in (bio)sensing technology. Regarding the advantageous features of phytochemicals as highly promising and potential biomaterials, we envisage that many of the existing chemical-based (bio)sensors will be replaced by phytochemical-based ones in the near future.

Ultrasensitive, rapid and selective sensing of hazardous fluoride ion in aqueous solution using a zirconium porphyrinic luminescent metal-organic framework

The development of a rapid and sensitive method for the detection of fluoride ion (F^-) in aqueous systems is of great significance for human health and environmental monitoring. In this study, a zirconium porphyrinic luminescent metal-organic framework (LMOF), PCN-222, was employed as a novel fluorescent probe for the ultrasensitive, rapid and selective detection of F^- in water. The PCN-222 probe was prepared by a facile solvothermal method. It exhibited good fluorescence stability and was highly stable in water. The fluorescence emission of PCN-222 could be effectively and selectively quenched by F^- due to the strong coordination affinity of F^- to the zirconium clusters in PCN-222. The proposed fluorescence method for F^- detection based on PCN-222 probe afforded a linear response range of 1-20 μmol/L and a very low detection limit (0.048-0.065 μmol/L) in reference to many reported F^- fluorescent probes. Moreover, a rapid response time (<10 s) was obtained due to the open and uniform pore structure of PCN-222 that allowed the fast diffusion of F^- to interact with the zirconium recognition sites. Finally, the PCN-222 probe was successfully applied for the fluorescence detection of F^- in real water samples. These results highlight the great application potential of LMOF in the sensing fields.

Ultra-sensitive detection of malathion residues using FRET-based upconversion fluorescence sensor in food

Malathion is an organophosphorus pesticide which could remain in agricultural products and exert irreversible harmful effects on human health. Hence, strict monitoring of malathion contents is very significant. Here, a highly sensitive fluorescent aptasensor was developed for the determination of malathion, the system was based on a cationic polymer-mediated fluorescence 'turn-off'. In this system, malathion-specific aptamers were bound to cationic polymer through electrostatic interactions. To produce fluorescence resonance energy transfer (FRET), negatively charged upconversion fluorescent nanoparticles (UCNPs) and cationic-polymer encapsulated gold nanoparticles (GNPs) were combined. This combination resulted in fluorescence quenching, and the degree of quenching was correlated with the concentration of malathion. Under optimum conditions, the fluorescence intensities were observed to decrease linearly with the rising concentration of the malathion from 0.01 to 1 μM with a detection limit of 1.42 nM. Furthermore, the developed sensor possessed good selective recognition ability for malathion and was successfully used to detect malathion in adulterated tap water and matcha samples with high accuracy.

A ratiometric fluorescence probe based on graphene quantum dots and o-phenylenediamine for highly sensitive detection of acetylcholinesterase activity

By using graphene quantum dots (GQDs) and o-phenylenediamine (OPD), a ratiometric fluorescence probe was designed for the highly sensitive and selective detection of AChE. GQDs with strong fluorescence were synthesized by the one-step hydrothermal method. The optimal emission wavelength of GQDs was 450 nm at the excitation wavelength of 375 nm. MnO₂ nanosheets with a wide absorption band of 300-600 nm were prepared at room temperature. Because of the extensive overlap between the absorption spectrum of MnO₂ nanosheets and the excitation and emission spectra of GQDs, the fluorescence of GQDs at 450 nm was efficiently quenched by the inner-filter effect. Meanwhile, due to the peroxidase-like activity of MnO₂ nanosheets, OPD was catalytically oxidized to 2,3-diaminophenazine (oxOPD), a yellow fluorescent substance with a new emission peak at 572 nm. When AChE was present, the substrate acetylthiocholine (ATCh) was hydrolyzed to thiocholine (TCh) that is capable of decomposing MnO₂ nanosheets. Therefore, the quench of GQDs and the oxidation of OPD by MnO₂ nanosheets were suppressed, resulting in the fluorescence recovery of GQDs at 450 nm, while the fluorescence decrease of oxOPD at 572 nm. Utilizing the fluorescence intensity ratio F₄₅₀/F₅₇₂ as the signal readout, the ratiometric fluorescence method was established to detect AChE activity. The ratio F₄₅₀/F₅₇₂ against the AChE concentration demonstrated two linear relationships in the range 0.1-2.0 and 2.0-4.5 mU mL^-1 with a detection limit of 0.09 mU mL^-1. The method was applied to the detection of positive human serum samples and the analysis of the inhibitor neostigmine. Due to the advantages of high sensitivity, favorable selectivity, and strong anti-interference, the method possesses an application prospect in clinical diagnosis of AChE and the screening of inhibitors. Graphical abstract Schematic presentation of a ratiometric fluorescence method for the detection of acetylcholinesterase (AChE). The fluorescence of graphene quantum dots (GQDs) is quenched and o-phenylenediamine (OPD) is oxidized to generate fluorescent product 2,3-diaminophenazine (oxOPD) by MnO₂ nanosheets. When AChE is present, acetylthiocholine iodide (ATCh) is hydrolyzed to thiocholine (TCh) with reducibility for decomposing MnO₂ nanosheets. Due to the decomposition of MnO₂ nanosheets, the quenching of GQDs and oxidation of OPD are suppressed. The fluorescence of GQDs at 450 nm is enhanced, while the fluorescence of oxOPD at 572 nm is reduced. The fluorescence intensity ratio F₄₅₀/F₅₇₂ is used to establish the ratiometric fluorescence method for AChE activity.