MoS2/WS2 Heterojunction for Photoelectrochemical Water Oxidation

How can heteroatoms boost the performance of photoactive nanomaterials for wastewater purification?

Photocatalysis, as an alternative for treating persistent water pollutants, holds immense promise. However, limitations hinder sustained treatment and recycling under varying light conditions. This comprehensive review delves into the novel paradigm of metal and non-metal doping to overcome these challenges. It begins by discussing the fundamental principles of photocatalysis and its inherent limitations. Understanding these constraints is crucial for developing effective strategies. Band gap narrowing by metal and non-metal doping modifies the band gap, enabling visible-light absorption. Impurity energy levels and oxygen vacancies influenced the doping energy levels and surface defects. Interfacial electron transfer and charge carrier recombination are the most important factors that impact overall efficiency. The comparative analysis of nanomaterials are reviewed on various, including nanometal oxides, nanocarbon materials, and advanced two-dimensional structures. The synthesis process are narratively presented, emphasizing production yields, selectivity, and efficiency. The review has potential applications in the environment for efficient pollutant removal and water purification, economic cost-effective and scalable production and technological advancement catalyst design, in spite of its challenges in material stability, synthesis methods and optimizing band gaps. The novelty of the review paper is on the proposal of a new paradigm of heterojunctions of doped metal and non-metal photocatalysts to promise highly efficient water treatment. This review bridges the gap between fundamental research and practical applications, offering insights into tailored nano photocatalysts.

Effect of CdS loading on the properties and photocatalytic activity of MoS2 nanosheets

Molybdenum sulfide (MoS2) and modified MoS2 with different percentages of CdS (10%, 30%, and 50% CdS@MoS2) were successfully synthesized and characterized. The photocatalytic performance of the MoS2 and CdS@MoS2 was evaluated by degrading brilliant green (BG), methylene blue (MB), and rhodamine B (RhB) dyes under visible light irradiation. Amongst the synthesized photocatalysts, 50% CdS@MoS2 exhibited the highest photocatalytic activity, degrading 97.6%, 90.3%, and 75.5% of BG, MB, and RhB dyes, respectively within 5 h. The active species involved in the degradation processes were investigated. All trapping agents inhibited BG and MB degradation to a similar extent, indicating that all of the probed active species play an important role in the degradation of BG and MB. In contrast, h+ and O2•- were found to be the main reactive species in the photocatalytic RhB degradation. A potential mechanism for the photocatalytic degradation of dyes using CdS@MoS2 has been proposed. This work highlights the potential of CdS@MoS2 as a photocatalyst for more efficient water remediation applications.

Long lived photogenerated charge carriers in few-layer transition metal dichalcogenides obtained from liquid phase exfoliation

Semiconducting transition metal dichalcogenides are important optoelectronic materials thanks to their intense light-matter interaction and wide selection of fabrication techniques, with potential applications in light harvesting and sensing. Crucially, these applications depend on the lifetimes and recombination dynamics of photogenerated charge carriers, which have primarily been studied in monolayers obtained from labour-intensive mechanical exfoliation or costly chemical vapour deposition. On the other hand, liquid phase exfoliation presents a high throughput and cost-effective method to produce dispersions of mono- and few-layer nanosheets. This approach allows for easy scalability and enables the subsequent processing and formation of macroscopic films directly from the liquid phase. Here, we use transient absorption spectroscopy and spatiotemporally resolved pump-probe microscopy to study the charge carrier dynamics in tiled nanosheet films of MoS2 and WS2 deposited from the liquid phase using an adaptation of the Langmuir-Schaefer technique. We find an efficient photogeneration of charge carriers with lifetimes of several nanoseconds, which we ascribe to stabilisation at nanosheet edges. These findings provide scope for photocatalytic and photodetector applications, where long-lived charge carriers are crucial, and suggest design strategies for photovoltaic devices.

Photoelectrochemical advanced oxidation processes for simultaneous removal of antibiotics and heavy metal ions in wastewater using 2D-on-2D WS2@CoFe2O4 heteronanostructures

The presence of antibiotics in water poses significant threats to both human health and the environment. Addressing this issue requires the effective treatment of medical wastewater. Photoelectrochemical advanced oxidation processes (PEAOPs) are emerging as promising solutions for wastewater treatment. This process utilizes photocatalysts to convert charge carriers into reactive species such as hydroxyl radicals and superoxide ions, which are essential for degrading pollutants in wastewater. However, limitations in charge carrier separation and transport have hindered the efficiency of photoelectrochemical advanced oxidation processes. To overcome these limitations, we designed WS2@CoFe2O4 heterojunctions, optimizing their energy levels to enhance charge transport and separation. This improvement significantly increased the oxidation of antibiotics such as amoxicillin and azithromycin. Multiple reactions occurred at the WS2@CoFe2O4 heterojunctions during photoelectrochemical advanced oxidation processes, leading to the impressive degradation of up to 99% of antibiotics under visible light irradiation at 0.8 V. Urea and H2O2 acted as oxidation agents within photoelectrochemical advanced oxidation processes, amplifying the generation of hydroxyl radicals and superoxide ions, further enhancing antibiotic oxidation. Moreover, the WS2@CoFe2O4 photoanode efficiently oxidized toxic antibiotics while converting As(III) into the less harmful As(V). Crucially, recyclability tests confirmed the robustness of the WS2@CoFe2O4 photoanode, ensuring its suitability for prolonged use in photoelectrochemical advanced oxidation processes. Integrating WS2@CoFe2O4 photoanodes into water purification systems can enhance efficiency, reduce energy consumption, and improve economic viability. This technology's scalability and its ability to protect ecosystems while conserving water resources make it a promising solution for addressing the critical issue of antibiotic pollution in water environments.

Effect of external electric field on the electronic properties of the AlAs/SiC van der Waals heterostructure

Type-II van der Waals (vdW) heterostructures are regarded as the optimum candidates for unipolar electronic device applications due to their capacity for spontaneous electron-hole separation. Here, we studied the electronic properties of the AlAs/SiC vdW heterostructure via density functional theory calculations. Results show that the conduction band minimum (CBM) and valence band maximum (VBM) of this heterostructure are mainly contributed by different materials, illustrating that the AlAs/SiC heterostructure has a type-II band alignment. Interestingly, this heterostructure possesses flat valence bands near the Fermi level. In addition, under the modulation of external electric field ranging between -1 V Å-1∼0.8 V Å-1, the band gap of the heterostructure can be tuned continuously, while the band structure maintains a stable type-II band alignment with flat top valence bands. When the electric field exceeds -1 or 0.8 V Å-1, the heterostructure transitions from semiconductor material to metal, indicating the tunability of electronic properties under external fields. These results indicate that the AlAs/SiC heterostructure shows great potential for application in high-performance optoelectronic devices and a strong correlation may exist in this system.

The Oxygen Evolution Reaction at MoS2 Edge Sites: The Role of a Solvent Environment in DFT-Based Molecular Simulations

Density functional theory (DFT) calculations are employed to study the oxygen evolution reaction (OER) on the edges of stripes of monolayer molybdenum disulfide. Experimentally, this material has been shown to evolve oxygen, albeit with low efficiency. Previous DFT studies have traced this low catalytic performance to the unfavourable adsorption energies of some reaction intermediates on the MoS₂ edge sites. In this work, we study the effects of the aqueous liquid surrounding the active sites. A computational approach is used, where the solvent is modeled as a continuous medium providing a dielectric embedding of the catalyst and the reaction intermediates. A description at this level of theory can have a profound impact on the studied reactions: the calculated overpotential for the OER is lowered from 1.15 eV to 0.77 eV. It is shown that such variations in the reaction energetics are linked to the polar nature of the adsorbed intermediates, which leads to changes in the calculated electronic charge density when surrounded by water. These results underline the necessity to computationally account for solvation effects, especially in aqueous environments and when highly polar intermediates are present.

Highly Selective NH3 Sensor Based on MoS2/WS2 Heterojunction

In this paper, the heterostructure of MoS₂/WS₂ was prepared by a hydrothermal method; the n-n heterostructure was demonstrated using TEM combined with Mott-Schottky analysis. The valence and conduction band positions were further identified by the XPS valence band spectra. The NH₃-sensing properties were assessed at room temperature by changing the mass ratio of the MoS₂ and WS₂ components. The 50 wt%-MoS₂/WS₂ sample exhibited the best performance, with a peak response of 23643% to NH₃ at a concentration of 500 ppm, a minimum detection limit of 20 ppm, and a fast recovery time of 2.6 s. Furthermore, the composites-based sensors demonstrated an excellent humidity immune property with less than one order of magnitude in the humidity range of 11-95% RH, revealing the practical application value of these sensors. These results suggest that the MoS₂/WS₂ heterojunction is an intriguing candidate for fabricating NH₃ sensors.

Interface coupling in Au-supported MoS2-WS2 heterobilayers grown by pulsed laser deposition

Van der Waals heterostructures of transition metal dichalcogenides (TMDs) are promising systems for engineering functional layered 2D materials with tailored properties. In this work, we study the growth of WS₂/MoS₂ and MoS₂/WS₂ heterobilayers by pulsed laser deposition (PLD) under ultra-high vacuum conditions. Using Au(111) as growth substrate, we investigated the heterobilayer morphology and structure at the nanoscale by in situ scanning tunneling microscopy. Our experiments show that the heterostructure growth can be controlled with high coverage and thickness sensitivity by tuning the number of laser pulses in the PLD process. Raman spectroscopy complemented our investigation, revealing the effect of the interaction with the metallic substrate on the TMD vibrational properties and a strong interlayer coupling between the MoS₂ and WS₂ layers. The transfer of the heterobilayers on a silica substrate via a wet etching process shows the possibility to decouple them from the native metallic substrate and confirms that the interlayer coupling is not substrate-dependent. This work highlights the potential of the PLD technique as a method to grow TMD heterostructures, opening to new perspectives in the synthesis of complex 2D layered materials.

Interface strong-coupled 3D Mo-NiS@Ni-Fe LDH flower-cluster as exceptionally efficient electrocatalyst for water splitting in wide pH range

It is crucial to create a bifunctional catalyst with high efficiency and low cost for electrochemical water splitting under alkaline and neutral pH conditions. This study investigated the in-situ creation of ultrafine Mo-NiS and NiFe LDH nanosheets as an effective and stable electrocatalyst with a three-dimensional (3D) flower-cluster hierarchical structure (Mo-NiS@NiFe LDH). The strong interfacial connection between Mo-NiS and NiFe LDH enhances the formation of metal higher chemical states in the material, optimizes the electronic structure, increases OH^- adsorption capacity improves electron transfer/mass diffusion, and promotes O₂/H₂ gas release. As a result, at 10 mA cm^-2, Mo-NiS@NiFe LDH/NF demonstrates the outstanding bifunctional electrocatalytic activity of just 107 mV (HER, hydrogen evolution reaction) and 184 mV (hydrogen evolution reaction) (OER, oxygen evolution reaction). The catalytic performance is remarkably stable after 72 h of continuous operation in 1 M KOH at high current densities (300 mA cm^-2). More interestingly, in the overall water splitting system, the cell voltages for anode and cathode in both alkaline and neutral electrolytes for Mo-NiS@NiFe LDH/NF are only 1.54 V (alkaline) and 2.06 V (neutral) at 10 mA cm^-2. These results demonstrated that the bifunctional electrocatalyst design concept is a viable solution for water splitting in both alkaline and neutral systems.

One-pot liquid-phase synthesis of MoS2-WS2van der waals heterostructures for broadband photodetection

Two dimensional (2D) van der Waals heterostructures (vdWHs) have unique potential in facilitating the stacking of layers of different 2D materials for optoelectronic devices with superior characteristics. However, the fabrication of large area all-2D heterostructures is still challenging towards realizing practical devices at a reduced cost. In the present work, we have demonstrated a rapid yet simple, impurity-free and efficient sonication-assisted chemical exfoliation approach to synthesize hybrid vdWHs based on 2D molybdenum disulphide (MoS₂) and tungsten disulphide (WS₂), with high yield. Microscopic and spectroscopic studies have confirmed the successful exfoliation of layered 2D materials and formation of their hybrid heterostructures. The co-existence of 2D MoS₂and WS₂in the vdWH hybrids is established by optical absorption and Raman shift measurements along with their chemical stiochiometry determined by x-ray photoelectron spectroscopy. The spectral response of the vdWH/Si (2D/3D) heterojunction photodetector fabricated using the as-synthesized material is found to exhibit broadband photoresponse compared to that of the individual 2D MoS₂and WS₂devices. The peak responsivity and detectivity are found to be as high as ∼2.15 A W^-1and 2.05 × 10¹¹Jones, respectively for an applied bias of -5 V. The ease of fabrication with appreciable performance of the chemically synthesized vdWH-based devices have revealed their potential use for large area optoelectronic applications on Si-compatible CMOS platforms.

Tunable 0D/2D/2D Nanocomposite Based on Green Zn-Doped CuInS2 Quantum Dots and MoS2/rGO as Photoelectrodes for Solar Hydrogen Production

Charge separation, transmission, and light absorption properties are critical to determining the performance of photoelectrochemical (PEC) devices. An important strategy to control such properties is based on using heterostructured materials. Herein, a tunable zero-dimensional (0D)/two-dimensional (2D) heterostructure is designed based on quantum dots (QDs) and 2D nanosheets (NSs). Specifically, eco-friendly Zn-doped CuInS₂ QDs prepared by hot injection were anchored on hierarchical (2D/2D) MoS₂/rGO (MG) NSs through a facile sonication-assisted method to develop a 0D/2D/2D heterojunction-based photoelectrode for solar hydrogen production. The interfacial structure and band alignment between the proposed 0D QDs and 2D/2D MG NSs were engineered by modulating the Zn molar ratio during the QD synthesis. As proof of concept, the optimized 0D/2D/2D photoanode exhibits almost five times higher PEC activity than MG/CuInS₂ and MoS₂/Zn-CuInS₂ NSs due to the enhanced light absorption, efficient charge separation, and transmission. Zn doping and the presence of graphene are essential in enhancing performance in the proposed heterostructure, reducing recombination of charge carriers, and improving sunlight absorption. This work shows how optimal band alignment control and carbon addition can facilitate charge transfer, enabling the development of highly efficient PEC devices based on 0D/2D/2D heterostructure nanocomposites.

Efficient and Facile Synthetic Route of MoO3:MoS2 Hybrid Thin Layer via Oxidative Reaction of MoS2 Nanoflakes

In the present study, MoO₃:MoS₂ hybrid thin layers have been synthesized through partial oxidation of MoS₂. We have demonstrated that the reaction requires darkness conditions to decrease the oxidation rate, thus obtaining the hybrid, MoO₃:MoS₂. A simple liquid-phase exfoliation (LPE) is carried out to achieve homogenous MoS₂ nanoflakes and high reproducibility of the results after MoS₂ oxidation. XPS analyses reveal the presence of MoO₃, MoS₂, and MoOxSy in the hybrid layer. These results are also confirmed by X-ray diffraction and high-resolution TEM. Optical absorbance reveals that the absorption peaks of the MoO₃:MoS₂ hybrid are slightly redshifted with the appearance of absorption peaks in the near-infrared region due to the defects created after the oxidation reaction. The composition and atomic percentages of each component in the hybrid layer as a function of reaction time have also been reported to give perspective guides for improving electronic and optoelectronic devices based on 2D-MoS₂.

Energy Interplay in Materials: Unlocking Next-Generation Synchronous Multisource Energy Conversion with Layered 2D Crystals

Layered 2D crystals have unique properties and rich chemical and electronic diversity, with over 6000 2D crystals known and, in principle, millions of different stacked hybrid 2D crystals accessible. This diversity provides unique combinations of properties that can profoundly affect the future of energy conversion and harvesting devices. Notably, this includes catalysts, photovoltaics, superconductors, solar-fuel generators, and piezoelectric devices that will receive broad commercial uptake in the near future. However, the unique properties of layered 2D crystals are not limited to individual applications and they can achieve exceptional performance in multiple energy conversion applications synchronously. This synchronous multisource energy conversion (SMEC) has yet to be fully realized but offers a real game-changer in how devices will be produced and utilized in the future. This perspective highlights the energy interplay in materials and its impact on energy conversion, how SMEC devices can be realized, particularly through layered 2D crystals, and provides a vision of the future of effective environmental energy harvesting devices with layered 2D crystals.

A Visible-Light-Active CuS/MoS2/Bi2WO6 Aptamer Sensitively Detects the Non-Steroidal Anti-Inflammatory Drug Diclofenac

Diclofenac is a non-steroidal, anti-inflammatory drug and is clinically used for the treatment of osteoarthritis, non-articular rheumatism, etc. This research aimed to demonstrate the creation of an upgraded photoelectrochemical (PEC) aptamer sensor for detecting diclofenac (DCF) with high sensitivity. In this work, photoactive materials and bio-identification components served as visible-light-active CuS/MoS₂/Bi₂WO₆ heterostructures and aptamers, respectively. CuS and MoS₂/Bi₂WO₆ were combined to improve photocurrent responsiveness, which helped the structure of PEC aptasensors. Additionally, the one-pot synthesis of CuS/MoS₂/Bi₂WO₆ was ecologically beneficial. With these optimizations, the photocurrent response of aptamer/CS/CuS/MoS₂/Bi₂WO₆ exhibited linearity between 0.1 and 500 nM DCF. The detection limit was 0.03 nM (S/N = 3). These results suggest that the PEC sensing technique might produce an ultra-sensitive sensor with high selectivity and stability for DCF detection.

2D-Material-Integrated Micromachines: Competing Propulsion Strategy and Enhanced Bacterial Disinfection

2D transition-metal-dichalcogenide materials, such as molybdenum disulfide (MoS₂ ) have received immense interest owing to their remarkable structure-endowed electronic, catalytic, and mechanical properties for applications in optoelectronics, energy storage, and wearable devices. However, 2D materials have been rarely explored in the field of micro/nanomachines, motors, and robots. Here, MoS₂  with anatase TiO₂  is successfully integrated into an original one-side-open hollow micromachine, which demonstrates increased light absorption of TiO₂ -based micromachines to the visible region and the first observed motion acceleration in response to ionic media. Both experimentation and theoretical analysis suggest the unique type-II bandgap alignment of MoS₂ /TiO₂  heterojunction that accounts for the observed unique locomotion owing to a competing propulsion mechanism. Furthermore, by leveraging the chemical properties of MoS₂ /TiO₂ , the micromachines achieve sunlight-powered water disinfection with 99.999% Escherichia coli lysed in an hour. This research suggests abundant opportunities offered by 2D materials in the creation of a new class of micro/nanomachines and robots.

Transient Surface Photovoltage Spectroscopy of (NH4)2Mo3S13/WSe2 Thin-Film Photocathodes for Photoelectrochemical Hydrogen Evolution

Hydrogen produced from solar energy has the potential to replace petroleum in the future. To this respect, there is a need in the abandoned and efficient materials that can continuously split water molecules using solar energy. In this report, an ammonium thiomolybdate (ATM: (NH₄)₂Mo₃S₁₃) is evaluated as a p-type semiconductor film photocathode for hydrogen evolution reaction. The ATM thin films are prepared by spin-coating on fluorine-doped tin oxide substrates, and their structural, morphological, optical, photoelectrical, and photoelectrochemical (PEC) properties are studied. Transient surface photovoltage (TSPV) spectroscopy and spectroscopic ellipsometry indicate the band gap E_g = 1.9 eV for the ATM thin films. Furthermore, the photovoltage of the ATM thin films measured by TSPV is correlated to the photocurrents measured by the PEC characterization that can be used to evaluate the material potential for hydrogen generation. The films exhibit a low photocurrent density of 46 μA cm^-2 at 0 V_RHE. However, its combination with WSe₂ thin-film photocathodes results in a significant increase in photocurrent density up to 4.6 mA cm^-2 at 0 V_RHE (100 times). The reason for such a strong charge carrier transfer effect for ATM/WSe₂ heterojunction photocathodes is studied by TSPV spectroscopy that allows a comprehensive evaluation of potential photovoltaic materials toward PEC hydrogen production. Furthermore, the photovoltage generated by a WSe₂ thin film is 30 times lower than that of its single crystal, which indicates that the quality of WSe₂ thin films should be improved for faster PEC hydrogen evolution.

Synergistic 2D MoSe2@WSe2 nanohybrid heterostructure toward superior hydrogen evolution and flexible supercapacitor

Two-dimensional (2D) transition metal dichalcogenide (TMDC) heterostructure is a new age strategy to achieve high electrocatalytic activity and ion storage capacity. The less complex and cost-effective applicability of the large-area TMDC heterostructure (HS) for energy applications require more research. Herein, we report the MoSe₂@WSe₂ nanohybrid HS electrocatalyst prepared using liquid exfoliated nanocrystals, followed by direct electrophoretic deposition (EPD). The improved catalytic activity is attributed to the exposure of catalytic active sites on the edge of nanocrystals after liquid exfoliation and the synergistic effect arises at HS interfaces between the MoSe₂ and WSe₂ nanocrystals. As predicted, the HS catalyst achieves a lower overpotential of 158 mV, a smaller Tafel slope of 46 mV dec^-1 for a current density of 10 mA cm^-2, and is stable for a long time. The flexible symmetric supercapacitor (FSSC) based on the HS catalyst demonstrates the excellent specific capacitance (C_sp) of 401 F g^-1 at 1 A g^-1, 97.20% capacitance retention after 5000 cycles and high flexible stability over 1000 bending cycles. This work presents a less complex and solution-processed efficient catalyst for future electrochemical energy applications.

High Performance Semiconducting Nanosheets via a Scalable Powder-Based Electrochemical Exfoliation Technique

The liquid-phase exfoliation of semiconducting transition metal dichalcogenide (TMD) powders into 2D nanosheets represents a promising route toward the scalable production of ultrathin high-performance optoelectronic devices. However, the harsh conditions required negatively affect the semiconducting properties, leading to poor device performance. Herein we demonstrate a gentle exfoliation method employing standard bulk MoS₂ powder (pressed into pellets) together with the electrochemical intercalation of a quaternary alkyl ammonium. The resulting nanosheets are produced in high yield (32%) and consist primarily of mono-, bi-, triatomic layers with large lateral dimensions (>1 μm), while retaining the semiconducting polymorph. Exceptional optoelectronic performance of nanosheet thin-films is observed, such as enhanced photoluminescence, charge carrier mobility (up to 0.2 cm² V^-1 s^-1 in a multisheet device), and photon-to-current efficiency while maintaining high transparency (>80%). Specifically, as a photoanode for iodide oxidation, an internal quantum efficiency up to 90% (at +0.3 V vs Pt) is achieved (compared to only 12% for MoS₂ nanosheets produced via ultrasonication). Further using a combination of fluorescence microscopy and high-resolution scanning transmission electron microscopy (STEM), we show that our gently exfoliated nanosheets possess a defect density (2.33 × 10¹³ cm^-2) comparable to monolayer MoS₂ prepared by vacuum-based techniques and at least three times less than ultrasonicated MoS₂ nanoflakes. Finally, we expand this method toward other TMDs (WS₂, WSe₂) to demonstrate its versatility toward high-performance and fully scalable van der Waals heterojunction devices.

Advances on removal of organophosphorus pesticides with electrochemical technology

Widespread use of organophosphorus pesticides (OPs), especially superfluous and unreasonable use, had brought huge harm to the environment and food chain. It is because only a small part of the pesticides sprayed reached the target, and the rest slid across the soil, causing pollution of groundwater and surface water resources. These pesticides accumulate in the environment, causing environmental pollution. Therefore, in recent years, the control and degradation of OPs have become a public spotlight and research hotspot. Due to its unique advantages such as versatility, environmental compatibility, controllability, and cost-effectiveness compatibility, electrochemical technology has become one of the most promising methods for degradation of OPs. The fundamental knowledge about electrochemical degradation on OPs was introduced in this review. Then, a comprehensive overview of four main types of practical electrochemical technologies to degrade pesticides were presented and evaluated. The knowledge contained herein should conduce to better understand the degradation of pesticides by electrochemical technology, and better exploit the degradation of pesticides in the environment and food. Overall, the objective of this review is to provide comprehensive guidance for rational design and application of electrochemical technology in the degradation of OPs for the safety of the environment and food chain in the future.

A bright future for engineering piezoelectric 2D crystals

The piezoelectric effect, mechanical-to-electrical and electrical-to-mechanical energy conversion, is highly beneficial for functional and responsive electronic devices. To fully exploit this property, miniaturization of piezoelectric materials is the subject of intense research. Indeed, select atomically thin 2D materials strongly exhibit the piezoelectric effect. The family of 2D crystals consists of over 7000 chemically distinct members that can be further manipulated in terms of strain, functionalization, elemental substitution (i.e. Janus 2D crystals), and defect engineering to induce a piezoelectric response. Additionally, most 2D crystals can stack with other similar or dissimilar 2D crystals to form a much greater number of complex 2D heterostructures whose properties are quite different to those of the individual constituents. The unprecedented flexibility in tailoring 2D crystal properties, coupled with their minimal thickness, make these emerging highly attractive for advanced piezoelectric applications that include pressure sensing, piezocatalysis, piezotronics, and energy harvesting. This review summarizes literature on piezoelectricity, particularly out-of-plane piezoelectricity, in the vast family of 2D materials as well as their heterostructures. It also describes methods to induce, enhance, and control the piezoelectric properties. The volume of data and role of machine learning in predicting piezoelectricity is discussed in detail, and a prospective outlook on the 2D piezoelectric field is provided.

Amorphous MoSxOy/h-BNxOy Nanohybrids: Synthesis and Dye Photodegradation

Molybdenum sulfide is a very promising catalyst for the photodegradation of organic pollutants in water. Its photocatalytic activity arises from unsaturated sulfur bonds, and it increases with the introduction of structural defects and/or oxygen substitutions. Amorphous molybdenum sulfide (a-MoSxOy) with oxygen substitutions has many active sites, which create favorable conditions for enhanced catalytic activity. Here we present a new approach to the synthesis of a-MoSxOy and demonstrate its high activity in the photodegradation of the dye methylene blue (MB). The MoSxOy was deposited on hexagonal boron oxynitride (h-BNO) nanoflakes by reacting h-BNO, MoCl5, and H2S in dimethylformamide (DMF) at 250 °C. Both X-ray diffraction analysis and high-resolution TEM show the absence of crystalline order in a-MoSxOy. Based on the results of Raman and X-ray photoelectron spectroscopy, as well as analysis by the density functional theory (DFT) method, a chain structure of a-MoSxOy was proposed, consisting of MoS3 clusters with partial substitution of sulfur by oxygen. When a third of the sulfur atoms are replaced with oxygen, the band gap of a-MoSxOy is approximately 1.36 eV, and the valence and conduction bands are 0.74 eV and -0.62 eV, respectively (relative to a standard hydrogen electrode), which satisfies the conditions of photoinduced splitting of water. When illuminated with a mercury lamp, a-MoSxOy/h-BNxOy nanohybrids have a specific mass activity in MB photodegradation of approximately 5.51 mmol g-1 h-1, which is at least four times higher than so far reported values for nonmetal catalysts. The photocatalyst has been shown to be very stable and can be reused.

Bi4AO6Cl2 (A = Ba, Sr, Ca) with Double and Triple Fluorite Layers for Visible-Light Water Splitting

Layered oxyhalides containing double or triple fluorite layers are promising visible-light-responsive water-splitting photocatalysts with unique band structures. Herein, we report on the synthesis, structure, and photocatalytic property of Bi₄BaO₆Cl₂ (I4/mmm) with alternating double (Bi₂O₂) and triple (Bi₂BaO₄) fluorite layers, which was extracted from the crystallographic database on the basis of Madelung potential calculations. Rietveld refinements from powder X-ray and neutron diffraction data revealed the presence of cationic disorder between Bi₂O₂ and Bi₂BaO₄ layers, leading to electrostatic stabilization. DFT calculations suggested that photogenerated electrons and holes flow through the double and triple layers, respectively, which may suppress electron-hole recombination. We expanded this double-triple system to include Bi₄CaO₆Cl₂ and Bi₄SrO₆Cl₂ with orthorhombic distortions and different degrees of cationic disorder, which allow band gap tuning. All the double-triple compounds Bi₄AO₆Cl₂ showed stable water-splitting photocatalysis in the presence of a sacrificial reagent.

Applications of Atomic Layer Deposition in Design of Systems for Energy Conversion

There is a huge demand for clean energy conversion in all industries. The clean energy production processes include electrocatalytic and photocatalytic conversion of water to hydrogen, carbon dioxide reduction, nitrogen conversion to ammonia, and oxygen reduction reaction and require novel cheap and efficient photo- and electrocatalysts and their scalable methods of fabrication. Atomic layer deposition is a thin film deposition method that allows to deposit thin layers of catalysts on virtually any surface of any shape, size, and porosity in an even and easy to control manner. Here the state of the art in applications of atomic layer deposition in the clean energy production and the opportunities it represents for the whole field of the photo- and electrocatalysis for a sustainable future are reviewed.

One-Pot Synthesis of Chlorophyll-Assisted Exfoliated MoS2/WS2 Heterostructures via Liquid-Phase Exfoliation Method for Photocatalytic Hydrogen Production

Developing strategies for producing hydrogen economically and in greener ways is still an unaccomplished goal. Photoelectrochemical (PEC) water splitting using photoelectrodes under neutral electrolyte conditions provides possibly one of the greenest routes to produce hydrogen. Here, we demonstrate that chlorophyll extracts can be used as an efficient exfoliant to exfoliate bulk MoS2 and WS2 to form a thin layer of a MoS2/WS2 heterostructure. Thin films of solution-processed MoS2 and WS2 nanosheets display photocurrent densities of -1 and -5 mA/cm2, respectively, and hydrogen evolution under simulated solar irradiation. The exfoliated WS2 is significantly more efficient than the exfoliated MoS2; however, the MoS2/WS2 heterostructure results in a 2500% increase in photocurrent densities compared to the individual constituents and over 12 h of PEC durability under a neutral electrolyte. Surprisingly, in real seawater, the MoS2/WS2 heterostructure exhibits stable hydrogen production after solar illumination for 12 h. The synthesis method showed, for the first time, how the MoS2/WS2 heterostructure can be used to produce hydrogen effectively. Our findings highlight the prospects for this heterostructure, which could be coupled with various processes towards improving PEC efficiency and applications.

An enhanced photoelectrochemical biosensor for colitoxin DNA based on HKUST-1/TiO2 and derived HKUST-CuO/TiO2 heterogeneous composites

HKUST-1 MOFs and its derivative HKUST-CuO were coupled with TiO₂ nanoparticles to form the heterogeneous composites of HKUST-1/TiO₂ and HKUST-CuO/TiO₂ based on their well-suitable bandgap energies (Eg). Compared with mono-component HKUST-1 or HKUST-CuO, the prepared composites displayed photoelectrochemical (PEC) response due to the synergistic effect from their heterogeneous structure. Higher photocurrent response was obtained on HKUST-CuO/TiO₂-modified ITO electrode (HKUST-CuO/TiO₂/ITO), which could be attributed to the hollow structure with a thin shell of HKUST-CuO greatly enhancing visible spectra harvesting. The CuO component in HKUST-CuO not only could accelerate electron transfer on the heterojunction interface but also effectively separate the photo-generated charge carriers (e^-1/h⁺). Based on the excellent PEC performance of prepared photoactive composite material, under visible-light excitation (λ ≥ 420 nm) and with a working potential of 0 V (vs. Ag/AgCl), the S1 (probe DNA)/HKUST-CuO/TiO₂/ITO PEC platform was successfully fabricated for colitoxin DNA detection without using ascorbic acid (AA) as an electron donor. Compared with the analysis results on S1/HKUST-1/TiO₂/ITO electrode, S1/HKUST-CuO/TiO₂/ITO displayed a wider linear response range from 1.0 × 10^-6 to 4.0 × 10^-1 nM with a lower detection limit of 3.73 × 10^-7 nM (S/N = 3), the linear regression equation was ΔI (10^-6 A) =0.5549-0.1858 log (C_S2/M), which confirmed the HKUST-CuO could improve sensitivity because of its prominent PEC property. The relative standard deviation (RSD) of the PEC sensor for target DNA detection of 2.0 × 10^-4 nM was 7.4%. The proposed DNA biosensor also possessed good specificity and stability. Hence, this reported work was a promising strategy for molecular diagnosis in the bio-analysis field. (A) Schematic illustration of the preparation process of the proposed PEC biosensors for colitoxin DNA detection. (B) The preparation process of HKUST-1 and HKUST-CuO.

Simultaneous Enhancement of Charge Separation and Hole Transportation in a W:α-Fe2O3/MoS2 Photoanode: A Collaborative Approach of MoS2 as a Heterojunction and W as a Metal Dopant

In this study, a facile approach has been successfully applied to synthesize a W-doped Fe₂O₃/MoS₂ core-shell electrode with unique nanostructure modifications for photoelectrochemical performance. A two-dimensional (2D) structure of molybdenum disulfide (MoS₂) and tungsten (W)-doped hematite (W:α-Fe₂O₃) overcomes the drawbacks of the α-Fe₂O₃ and MoS₂ semiconductor through simple and facile processes to improve the photoelectrochemical (PEC) performance. The highest photocurrent density of the 0.5W:α-Fe₂O₃/MoS₂ photoanode is 1.83 mA·cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE) under 100 mW·cm² illumination, which is higher than those of 0.5W:α-Fe₂O₃ and pure α-Fe₂O₃ electrodes. The overall water splitting was evaluated by measuring the H₂ and O₂ evolution, which after 2 h of irradiation for 0.5W:α-Fe₂O₃/MoS₂ was determined to be 49 and 23.8 μmol.cm^-2, respectively. The optimized combination of the heterojunction and metal doping on pure α-Fe₂O₃ (0.5W:α-Fe₂O₃/MoS₂ photoanode) showed an incident photon-to-electron conversion efficiency (IPCE) of 37% and an applied bias photon-to-current efficiency (ABPE) of 26%, which are around 5.2 and 13 times higher than those of 0.5W:α-Fe₂O₃, respectively. Moreover, the facile fabrication strategy can be easily extended to design other oxide/carbon-sulfide/oxide core-shell materials for extensive applications.

Modulating the 0D/2D Interface of Hybrid Semiconductors for Enhanced Photoelectrochemical Performances

Photoelectrochemical (PEC) solar-driven hydrogen production is a promising route to convert solar energy into chemical energy using semiconductors as active materials. However, the performance is still far from satisfactory due to a limited absorption range and rapid charge recombination. Compared to 3D semiconductors, 0D/2D nanohybrids may exhibit better PEC performance, due to the formation of an intimate interface between the two semiconductors that can inhibit carrier recombination. Herein, a photoelectrode based on a 0D/2D heterojunction is constructed by 0D metal chalcogenide quantum dots (QDs) and hierarchical 2D Zn-MoS₂ nanosheets (NSs). The effect of PbS, CdS, and their composite PbS@CdS QDs is analyzed by depositing them onto Zn-MoS₂ NSs using an in situ process. This distinctive heterojunction can leverage the light harvesting capabilities of QDs with the catalytic performance of Zn-MoS₂ . Compared to Zn-MoS₂ , Zn-MoS₂ /PbS, and Zn-MoS₂ /CdS, the obtained 0D/2D heterostructure based on the composite Zn-MoS₂ /PbS@CdS has a significantly enhanced photocurrent. The synergistic effect between 0D/2D heterojunction, the extended absorption range of QDs, and the strong coupling and band alignment between them lead to superior solar-driven PEC performance. This work can provide a new platform to construct multifunctional 0D/2D nanohybrids for optoelectronic applications, not limited to PEC devices.

Toxicity evaluation of bulk and nanosheet MoS2 catalysts using battery bioassays

Herein, the main aim is to study the influence of the materials' structural properties on their ecotoxicological properties. The acute toxicity of the bulk (molybdenum disulfide) MoS₂ and 2D nanosheet MoS₂ was investigated using organisms of four different taxonomic groups. Ultrasound-assisted liquid-phase exfoliation method was used for preparing 2D nanosheets from bulk MoS₂. Bulk and nanosheet MoS₂ were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) analyses. The acute toxicity of the bulk and nanosheet MoS₂ catalysts was evaluated with four different bioassays using the test organisms Vibrio fischeri (a marine photobacterium), Pseudokirchnerialla subcapitata (a freshwater microalga), Daphnia magna (a freshwater crustacean) and the freshwater duckweed Spirodela polyrhiza. The toxic effect of the materials depended on their structural/size features and the type/sensitivity of the test organism. Generally speaking, bulk MoS₂ was more toxic than its nanosheet form. The freshwater crustacean Daphnia magna appeared to be the most suitable, easy-to-handle, and at the same time sensitive test organism for bulk and nanosheet MoS₂ among the tested organisms.

Ultrasonication-assisted liquid-phase exfoliation enhances photoelectrochemical performance in α-Fe2O3/MoS2 photoanode

This study successfully manufactured a p-n heterojunction hematite (α-Fe₂O₃) structure with molybdenum disulfide (MoS₂) to address the electron-hole transfer problems of conventional hematite to enhance photoelectrochemical (PEC) performance. The two-dimensional MoS₂ nanosheets were prepared through ultrasonication-assisted liquid-phase exfoliation, after which the concentration, number of layers, and thickness parameters of the MoS₂ nanosheets were respectively estimated by UV-vis, HRTEM and AFM analysis to be 0.37 mg/ml, 10-12 layers and around 6 nm. The effect of heterojunction α-Fe₂O₃/MoS₂ and the role of the ultrasonication process were investigated by the optimized concentration of MoS₂ in the forms of bulk and nanosheet on the surface of the α-Fe₂O₃ electrode while measuring the PEC performance. The best photocurrent density of the α-Fe₂O₃/MoS₂ photoanode was obtained at 1.52 and 0.86 mA.cm^-2 with good stability at 0.6 V vs. Ag/AgCl under 100 mW/cm² (AM 1.5) illumination from the back- and front-sides of α-Fe₂O₃/MoS₂; these values are 13.82 and 7.85-times higher than those of pure α-Fe₂O₃, respectively. The results of electrochemical impedance spectroscopy (EIS) and Mott-Schottky analysis showed increased donor concentration (2.6-fold) and decreased flat band potential (by 20%). Moreover, the results of IPCE, ABPE, and OCP analyses also supported the enhanced PEC performance of α-Fe₂O₃/MoS₂ through the formation of a p-n heterojunction, leading to a facile electron-hole transfer.

Engineering Nanostructure-Interface of Photoanode Materials Toward Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water oxidation based on semiconductor materials plays an important role in the production of clean fuel and value-added chemicals. Nanostructure-interface engineering has proven to be an effective way to construct highly efficient PEC water oxidation photoanodes with good light capture, carrier transport, and water oxidation kinetics. However, from theoretical and application perspectives, the relationship between the nanostructure and interface of photoanode materials and their PEC performance remains unclear. In this review, the PEC water oxidation reaction mechanism and evaluation criteria are briefly presented. The theoretical basis and research status of the nanostructure-interface engineering on constructing high-performance PEC water oxidation photoanodes are summarized and discussed. Finally, the current challenges and the future opportunities of nanostructure-interface engineering for the PEC reactions are pointed out.

Three-dimensional core-shell heterostructure of tungsten trioxide/bismuth molybdate/cobalt phosphate for enhanced photoelectrochemical water splitting

Hydrogen has attracted increasing attention as clean energy for fuel cells over the past decade. Photoelectrochemical (PEC) water splitting is considered the most feasible production method but its practical efficiency depends significantly on the photogeneration rate of electron (e^-) and hole (h⁺) on a semiconductor photoanode and the rapid separation of these charge carriers. A proper match of small and large bandgap positions is also necessary. This paper presents a three-dimensional core-shell heterostructured tungsten trioxide/bismuth molybdate/cobalt phosphate (WO₃/Bi₂MoO₆/Co-Pi) photocatalyst synthesized using simultaneous hydrothermal and electrodeposition techniques. Uniform Bi₂MoO₆ nanoflakes formed on WO₃ nanoplates as evidenced by various micro-spectroscopic techniques. The as-prepared WO₃/Bi₂MoO₆/Co-Pi hetero-photocatalyst exhibited significantly high photoelectrochemical activity, where its photocurrent efficiency was 4.6 times greater than that of the constituent WO_3. Such drastic improvement in the PEC properties can be corroborated by the appropriate bandgap alignment among WO₃, Bi₂MoO₆, and Co-Pi, resulting in a sufficient charge carrier density with efficient, fast charge-transport complementing their structural-morphological synergy. Furthermore, a heterojunction charge-transfer mechanism was proposed to verify the role of the co-catalyst, Co-Pi, in enhancing the photocurrent at the WO₃/Bi₂MoO₆ photoanode under the same applied bias.

Two-dimensional WS2/MoS2 heterostructures: properties and applications

The successful fabrication of WS₂/MoS₂ heterostructures provides more possibilities for optoelectronic and thermoelectric applications than graphene because of their direct bandgap characteristics; therefore, scientific investigations on WS₂/MoS₂ heterostructures are more significant and thriving. In this paper, we review the latest research progress in WS₂/MoS₂ heterostructures, and look forward to their properties and applications. Firstly, we analyze the crystal structure and electronic structure of WS₂, MoS₂, and their heterostructures. Secondly, we comprehensively present the widely used methods for preparing heterostructures. Finally, based on the unique physical characteristics of WS₂/MoS₂ heterostructures, we focus on their properties and applications in mechanics, electronics, optoelectronics, and thermoelectronics.

Phonon-Mediated Interlayer Charge Separation and Recombination in a MoSe2/WSe2 Heterostructure

Monolayer transition metal dichalcogenides bear great potential for photodetection and light harvesting due to high absorption coefficients. However, these applications require dissociation of strongly bound photogenerated excitons. The dissociation can be achieved by vertically stacking different monolayers to realize band alignment that favors interlayer charge transfer. In such heterostructures, the reported recombination times vary strongly, and the charge separation and recombination mechanisms remain elusive. We use two color pump-probe microscopy to demonstrate that the charge separation in a MoSe₂/WSe₂ heterostructure is ultrafast (∼200 fs) and virtually temperature independent, whereas the recombination accelerates strongly with temperature. Ab initio quantum dynamics simulations rationalize the experiments, indicating that the charge separation is temperature-independent because it is barrierless, involves dense acceptor states, and is promoted by higher-frequency out-of-plane vibrations. The strong temperature dependence of the recombination, on the other hand, arises from a transient indirect-to-direct bandgap modulation by low-frequency shear and layer breathing motions.

Engineering MoSe2/WS2 Hybrids to Replace the Scarce Platinum Electrode for Hydrogen Evolution Reactions and Dye-Sensitized Solar Cells

In recent times, two-dimensional transition-metal dichalcogenides (TMDs) have become extremely attractive and proficient electrodes for dye-sensitized solar cells (DSSCs) and water electrolysis hydrogen evolution as alternatives to the scarce metal platinum (Pt). The active TMD molybdenum selenide (MoSe₂) and tungsten disulfide (WS₂) are inspiring systems owing to their abundance of active sulfur and selenium sites, but their outputs are lacking due to their inactive basal planes and ineffective transport behavior. In this work, van der Waals interrelated MoSe₂/WS₂ hybrid structures were constructed on conducting glass substrates by chemicophysical methodologies. For the first time, the constructed MoSe₂/WS₂ structures were effectively used as a counter electrode for DSSCs and an active electrode for hydrogen evolution to replace the nonabundant Pt. The assembled DSSCs using the designed MoSe₂/WS₂ heterostructure counter electrode provided a superior power-conversion efficiency of 9.92% and a photocurrent density of 23.10 mA·cm^-2, unmatchable by most of the TMD-based structures. The MoSe₂/WS₂ heterostructure displayed excellent electrocatalytic hydrogen evolution behavior with a 75 mV overpotential to drive a 10 mA·cm^-2 current density, a 60 mV·dec^-1 Tafel slope, and an over 20 h durable process in an acidic medium. The results demonstrated the advantages of the MoSe₂/WS₂ hybrid development for generating interfacial transport and active facet distribution and enriching the electrocatalytic activity for DSSCs and the water-splitting hydrogen evolution process.

Atomically thin photoanode of InSe/graphene heterostructure

Achieving high-efficiency photoelectrochemical water splitting requires a better understanding of ion kinetics, e.g., diffusion, adsorption and reactions, near the photoelectrode's surface. However, with macroscopic three-dimensional electrodes, it is often difficult to disentangle the contributions of surface effects to the total photocurrent from that of various factors in the bulk. Here, we report a photoanode made from a InSe crystal monolayer that is encapsulated with monolayer graphene to ensure high stability. We choose InSe among other photoresponsive two-dimensional (2D) materials because of its unique properties of high mobility and strongly suppressing electron-hole pair recombination. Using the atomically thin electrodes, we obtained a photocurrent with a density >10 mA cm^-2 at 1.23 V versus reversible hydrogen electrode, which is several orders of magnitude greater than other 2D photoelectrodes. In addition to the outstanding characteristics of InSe, we attribute the enhanced photocurrent to the strong coupling between the hydroxide ions and photo-generated holes near the anode surface. As a result, a persistent current even after illumination ceased was also observed due to the presence of ions trapped holes with suppressed electron-hole recombination. Our results provide atomically thin materials as a platform for investigating ion kinetics at the electrode surface and shed light on developing next-generation photoelectrodes with high efficiency.

Ultrasonically prepared photocatalyst of W/WO3 nanoplates with WS2 nanosheets as 2D material for improving photoelectrochemical water splitting

A sonochemical treatment has been an emerged technique as an interesting method for fabricating different photocatalysts with unique photoelectrochemical (PEC) properties. This study investigated the PEC performance of WO3 with WS2 nanosheets as a 2D material before calcination (WO3/WS2-90) and after calcination (WO3/WS2-450) prepared with sonochemical treatment. The WS2 nanosheets were prepared from a liquid exfoliation phase with few-layer nanosheets, approximately 6.5 nm in thickness. The nanosheets were confirmed by UV-Vis spectroscopy and atomic force microscopy. Further, XPS, RAMAN, and SEM-EDAX analyses indicated that, following calcination of the WO3/WS2 electrode, the WS2 nanosheets initially transformed to 2D-WO3. After depositing the WS2 nanosheets on the WO3, the photocurrent density increased substantially. The WO3/WS2-450 films after calcination showed a photocurrent density of 5.6 mA.cm-2 at 1.23 V vs. Ag/AgCl, which was 3.1 and 7.2 times higher, respectively than those of the WO3/WS2-90 before calcination and pure WO3. Mott-Schottky and electrochemical impedance spectroscopy analyses confirmed the fabrication of the WO3/WS2 photoanode after calcination. The deposition of WS2 nanosheets onto pure WO3 increased the donor concentration (24-fold), reduced the space charge layer (4.6-fold), and decreased the flat band potential (1.6-fold), which could all help improve the photoelectrochemical efficiency. Moreover, the incorporation of WO3 with WS2 nanosheets as a 2D material (WO3/WS2-450) enhanced the incident photon current efficiency (IPCE) by 55%. In addition, the applied-bias photon-to-current conversion efficiency of the WO3/WS2-450 films was approximately 2.26% at 0.75 V (vs. Ag/AgCl), which is 5.6 and 9 times higher, respectively than those of WO3/WS2-90 and pure WO3.

Highly Efficient Photoelectrochemical Water Splitting Using GaN-Nanowire Photoanode with Tungsten Sulfides

In the present study, we have achieved high-performance photoelectrochemical water splitting (PEC-WS) using GaN nanowires (NWs) coated with tungsten sulfide (W_xS_1-x) (GaN-NW-W_xS_1-x) as a photoanode. The measured current density and applied-bias photon-to-current efficiency were 20.38 mA/cm² and 13.76%, respectively. These values were much higher than those reported previously for photoanodes with any kind of III-nitride nanostructure. The amount of hydrogen gas formed was 1.01 mmol/cm² from 7 h PEC-WS, which was also much higher than the previously reported values. The drastic improvement in the PEC-WS performance using the GaN-NW-W_xS_1-x photoanode was attributed to an increase in the number of photogenerated carriers due to the highly crystalline GaN NWs, and acceleration of separation of photogenerated carriers and consequent suppression of charge recombination because of nitrogen-terminated surfaces of NWs, sulfur vacancies in W_xS_1-x, and type-II band alignment between NW and W_xS_1-x. The degree of impedance matching, evaluated from Nyquist plots, was considered to analyze charge transfer characteristics at the interface between the GaN-NW-W_xS_1-x photoanode and 0.5-M H₂SO₄ electrolyte. Considering the material system and scheme for the PEC-WS, our approach provides an efficient way to improve hydrogen evolution reaction.

Molybdenum Tungsten Disulfide with a Large Number of Sulfur Vacancies and Electronic Unoccupied States on Silicon Micropillars for Solar Hydrogen Evolution

Hydrogen energy is a promising alternative for fossil fuels because of its high energy density and carbon-free emission. Si is an ideal light absorber used in solar water splitting to produce H₂ gas because of its small band gap, appropriate conduction band position, and high theoretical photocurrent. However, the overpotential required to drive the photoelectrochemical (PEC) hydrogen evolution reaction (HER) on bare Si electrodes is severely high owing to its sluggish kinetics. Herein, a molybdenum tungsten disulfide (MoS₂-WS₂) composite decorated on a Si photoabsorber is used as a cocatalyst to accelerate HER kinetics and enhance PEC performance. This MoS₂-WS₂ hybrid showed superior catalytic activity compared with pristine MoS₂ or WS₂. The optimal MoS₂-WS₂/Si electrode delivered a photocurrent of -25.9 mA/cm² at 0 V (vs reversible hydrogen electrode). X-ray absorption spectroscopy demonstrated that MoS₂-WS₂ possessed a high hole concentration of unoccupied electronic states in the MoS₂ component, which could promote to accept large amounts of carriers from the Si photoabsorber. Moreover, a large number of sulfur vacancies are generated in the MoS₂ constituent of this hybrid cocatalyst. These sulfur defects served as HER active sites to boost the catalytic efficiency. Besides, the TiO₂-protective MoS₂-WS₂/Si photocathode maintained a current density of -15.0 mA/cm² after 16 h of the photocatalytic stability measurement.

Seamlessly Splicing Metallic Sn x Mo1- x S2 at MoS2 Edge for Enhanced Photoelectrocatalytic Performance in Microreactor

Accurate design of the 2D metal-semiconductor (M-S) heterostructure via the covalent combination of appropriate metallic and semiconducting materials is urgently needed for fabricating high-performance nanodevices and enhancing catalytic performance. Hence, the lateral epitaxial growth of M-S Sn x Mo1- x S2/MoS2 heterostructure is precisely prepared with in situ growth of metallic Sn x Mo1- x S2 by doping Sn atoms at semiconductor MoS2 edge via one-step chemical vapor deposition. The atomically sharp interface of this heterostructure exhibits clearly distinguished performance based on a series of characterizations. The oxygen evolution photoelectrocatalytic performance of the epitaxial M-S heterostructure is 2.5 times higher than that of pure MoS2 in microreactor, attributed to the efficient electron-hole separation and rapid charge transfer. This growth method provides a general strategy for fabricating seamless M-S lateral heterostructures by controllable doping heteroatoms. The M-S heterostructures show increased carrier migration rate and eliminated Fermi level pinning effect, contributing to their potential in devices and catalytic system.

One-pot synthesis of MoS2(1-x)Se2x on N-doped reduced graphene oxide: tailoring chemical and structural properties for photoenhanced hydrogen evolution reaction

In this work we designed a one-pot solvothermal synthesis of MoS_2(1-x)Se_2x nanosheets directly grown on N-doped reduced graphene oxide (hereafter N-rGO). We optimized the synthesis conditions to control the Se : S ratio, with the aim of tailoring the optoelectronic properties of the resulting nanocomposites for their use as electro- and photoelectro-catalysts in the hydrogen evolution reaction (HER). The synthesis protocol made use of ammonium tetrathiomolybdate (ATM) as MoS₂ precursor and dimethyl diselenide (DMDSe) as selenizing agent. By optimizing growth conditions and post-annealing treatments, we produced either partially amorphous or highly crystalline chalcogen-defective electrocatalysts. All samples were tested for the HER in acidic environment, and the best performing among them, for the photoassisted HER. In low crystallinity samples, the introduction of Se is not beneficial for promoting the catalytic activity, and MoS₂/N-rGO was the most active electrocatalyst. On the other hand, after the post-annealing treatment and the consequent crystallization of the materials, the best HER performance was obtained for the sample with x = 0.38, which also showed the highest enhancement upon light irradiation.

Photoelectrochemical immunosensor for methylated RNA detection based on WS2 and poly(U) polymerase-triggered signal amplification

A novel photoelectrochemical immunosensor has been constructed for the determination of methylated RNA. MoS₂ nanosheets with large specific area were employed as photoactive material, gold nanoparticles were used as signal amplification unit and immobilization matrix of 4-mercaptophenylboronic acid, anti-m⁶A antibody was adopted as methylated RNA recognition reagent, and poly(U) polymerase-mediated RNA chain extension and Ru(NH₃)₆³⁺ were used as assisted signal amplification unit. With the sensitization effect of Ru(NH₃)₆³⁺, the photoactivity of WS₂ nanosheets was improved greatly, which also improved the sensitivity. Using visible-light excitation and ascorbic acid as electron donor, the sensitive determination of methylated RNA was achieved by monitoring the photocurrent change with different concentrations of methylated RNA. This photoelectrochemical immunosensor has a wide linear relationship with methylated RNA concentration from 0.05 to 35 nM under optimal experimental conditions. The low detection limit of 14.5 pM was realized based on 3σ criterion. In addition to the good selectivity, this sensor also presents high reproducibility with a relative standard deviation of 1.4% for the photocurrent of seven electrodes. The applicability of the developed method was also investigated by detecting the level of methylated RNA in corn seedling leaves with and without sulfadiazine treatment. Graphical abstract A novel photoelectrochemical immunosensor was developed for methylated RNA detection using the photoactive material of MoS2 and poly(U) polymerase-mediated RNA chain extension.

Enhanced Light-Driven Charge Separation and H2 Generation Efficiency in WSe2 Nanosheet-Semiconductor Nanocrystal Heterostructures

Semiconductor-catalyst heterostructures have shown promising performances for light-driven H₂ generation, although further development of these materials is hindered by the lack of cost-effective and efficient catalysts. In this paper, we adopt a colloidal method to prepare few-layer WSe₂ nanosheets without exfoliation and apply them as catalysts for forming heterostructures with a wide range of semiconductor absorbers (CdS nanorods, CdSe/CdS dot-in-rods, TiO₂ nanoparticles, g-C₃N₄ nanosheets). These WSe₂-semiconductor heterostructures show enhanced solar-to-hydrogen conversion efficiencies compared to semiconductors without WSe₂. The detailed mechanism of this enhancement has been investigated using WSe₂ nanosheet-decorated CdSe/CdS dot-in-rods as a model system, which display ∼5.5-fold higher hydrogen generation apparent quantum efficiency compared to free CdSe/CdS dot-in-rods. Transient absorption spectroscopic studies reveal efficient charge separation in WSe₂-decorated CdSe/CdS dot-in-rods, suggesting its key role in enhancing the H₂ generation efficiency of WSe₂-semiconductor heterostructures. This work demonstrates the great potentials of WSe₂ nanosheets as catalysts for light-driven hydrogen production and the important effect of forming WSe₂-semiconductor heterostructures in facilitating charge separation and photocatalysis.