Evaluation of Toxicity Ranking for Metal Oxide Nanoparticles via an in Vitro Dosimetry Model

Mechanobiological Analysis of Nanoparticle Toxicity

Nanoparticles (NPs) are commonly used in healthcare and nanotherapy, but their toxicity at high concentrations is well-known. Recent research has shown that NPs can also cause toxicity at low concentrations, disrupting various cellular functions and leading to altered mechanobiological behavior. While researchers have used different methods to investigate the effects of NPs on cells, including gene expression and cell adhesion assays, the use of mechanobiological tools in this context has been underutilized. This review emphasizes the importance of further exploring the mechanobiological effects of NPs, which could reveal valuable insights into the mechanisms behind NP toxicity. To investigate these effects, different methods, including the use of polydimethylsiloxane (PDMS) pillars to study cell motility, traction force production, and rigidity sensing contractions, have been employed. Understanding how NPs affect cell cytoskeletal functions through mechanobiology could have significant implications, such as developing innovative drug delivery systems and tissue engineering techniques, and could improve the safety of NPs for biomedical applications. In summary, this review highlights the significance of incorporating mechanobiology into the study of NP toxicity and demonstrates the potential of this interdisciplinary field to advance our knowledge and practical use of NPs.

An In Vitro Dosimetry Tool for the Numerical Transport Modeling of Engineered Nanomaterials Powered by the Enalos RiskGONE Cloud Platform

A freely available "in vitro dosimetry" web application is presented enabling users to predict the concentration of nanomaterials reaching the cell surface, and therefore available for attachment and internalization, from initial dispersion concentrations. The web application is based on the distorted grid (DG) model for the dispersion of engineered nanoparticles (NPs) in culture medium used for in vitro cellular experiments, in accordance with previously published protocols for cellular dosimetry determination. A series of in vitro experiments for six different NPs, with Ag and Au cores, are performed to demonstrate the convenience of the web application for calculation of exposure concentrations of NPs. Our results show that the exposure concentrations at the cell surface can be more than 30 times higher compared to the nominal or dispersed concentrations, depending on the NPs' properties and their behavior in the cell culture medium. Therefore, the importance of calculating the exposure concentration at the bottom of the cell culture wells used for in vitro arrays, i.e., the particle concentration at the cell surface, is clearly presented, and the tool introduced here allows users easy access to such calculations. Widespread application of this web tool will increase the reliability of subsequent toxicity data, allowing improved correlation of the real exposure concentration with the observed toxicity, enabling the hazard potentials of different NPs to be compared on a more robust basis.

NanoMixHamster: a web-based tool for predicting cytotoxicity of TiO2-based multicomponent nanomaterials toward Chinese hamster ovary (CHO-K1) cells

Nano-QSAR models can be effectively used for prediction of the biological activity of nanomaterials that have not been experimentally tested before. However, their use is associated with the need to have appropriate knowledge and skills in chemoinformatics. Thus, they are mainly aimed at specialists in the field. This significantly limits the potential group of recipients of the developed solutions. In this perspective, the purpose of the presented research was to develop an easily accessible and user-friendly web-based application that could enable the prediction of TiO₂-based multicomponent nanomaterials cytotoxicity toward Chinese Hamster Ovary (CHO-K1) cells. The graphical user interface is clear and intuitive and the only information required from the user is the type and concentration of the metals which will be modifying TiO₂-based nanomaterial. Thanks to this, the application will be easy to use not only by cheminformatics but also by specialists in the field of nanotechnology or toxicology, who will be able to quickly predict cytotoxicity of desired nanoclusters. We have performed case studies to demonstrate the features and utilities of developed application. The NanoMixHamster application is freely available at https://nanomixhamster.cloud.nanosolveit.eu/.

Evaluation of Maghemite Nanoparticles-Induced Developmental Toxicity and Oxidative Stress in Zebrafish Embryos/Larvae

Maghemite nanoparticles ([Formula: see text] NPs) have a wide array of applications in various industries including biomedical field. There is an absence of legislation globally for the regulation of the production, use, and disposal of such NPs as they are eventually dumped into the environment where these NPs might affect the living systems. This study evaluates the effect of the [Formula: see text] NP-induced developmental toxicity in zebrafish embryos/larvae. The commercially available Fe₂O₃ NPs were purchased, and zebrafish embryos toxicity test was done by exposing embryos to various concentrations of [Formula: see text] NPs at 1 hpf and analyzed at 96 hpf. Based on the LC₅₀ value (60.17 ppm), the sub-lethal concentrations of 40 and 60 ppm were used for further experiments. Hatching, lethality, developmental malformations, and heartbeat rate were measured in the control and treated embryos/larvae. The ionic Fe content in the media, and the larvae was quantified using ICP-MS and AAS. The biomolecular alterations in the control and treated groups were analyzed using FT-IR. The Fe ions present in the larvae were visualized using SEM-EDXS. In situ detection of AChE and apoptotic bodies was done using staining techniques. Biochemical markers (total protein content, AChE, and Na⁺ K⁺-ATPase) along with oxidants and antioxidants were assessed. A significant decrease in the heartbeat rate and hatching delay was observed in the treated groups affecting the developmental processes. Teratogenic analysis showed increased developmental deformity incidence in treated groups in a dose-dependent manner. The accumulation of Fe was evidenced from the ICP-MS, AAS, and SEM-EDXS. Alterations in AChE and Na⁺ K⁺-ATPase activity were observed along with an increment in the oxidants level with a concomitant decrease in antioxidant enzymes. These results show [Formula: see text] NP exposure leads to developmental malformation and results in the alteration of redox homeostasis.

Six-well plate-based colony-forming efficacy assay and Co-Culture application to assess toxicity of metal oxide nanoparticles

The development of a universal, label-free, and reliable in vitro toxicity testing method for nanoparticles is urgent because most nanoparticles can interfere with toxicity assays. In this regard, the colony-forming efficacy (CFE) assay has been suggested as a suitable in vitro toxicity assay for testing nanoparticles without such interference. Recently, the Organisation for Economic Co-operation and Development (OECD) developed a 60 × 15 mm Petri dish-based CFE assay for testing nanoparticles in MDCK-1 cells. However, further investigations are needed, including testing with other cell types, at a smaller scale for greater efficiency, and the application of the co-culture technique. In this study, we selected TiO₂, CuO, CeO₂, and SiO₂ as test nanoparticles and successfully developed a 6-well plate-based CFE assay using HepG2 and A549 cells and a co-culture assay for combinations of HepG2 cells and THP-1 macrophages or A549 cells and THP-1 monocytes. The results suggest that the 6-wellplate-based CFE assay for HepG2 and A549 cells can be applied to nanoparticles, but the co-culture CFE assay has limitations in that it is not different from the single culture study, and it inhibits colony-formation by A549 cells in the presence of macrophages; this warrant further study.

Antibacterial Activity of Copper Nanoparticles (CuNPs) against a Resistant Calcium Hydroxide Multispecies Endodontic Biofilm

Endodontic treatment reduces the amount of bacteria by using antimicrobial agents to favor healing. However, disinfecting all of the canal system is difficult due to its anatomical complexity and may result in endodontic failure. Copper nanoparticles have antimicrobial activity against diverse microorganisms, especially to resistant strains, and offer a potential alternative for disinfection during endodontic therapy. This study evaluated the antibacterial action of copper nanoparticles (CuNPs) on an ex vivo multispecies biofilm using plaque count compared to the antibacterial activity of calcium hydroxide Ca(OH)₂. There were significant differences between the Ca(OH)₂ and CuNPs groups as an intracanal dressing compared with the CuNPs groups as an irrigation solution (p < 0.0001). An increase in the count of the group exposed to 7 days of Ca(OH)₂ was observed compared to the group exposed to Ca(OH)₂ for 1 day. These findings differ from what was observed with CuNPs in the same period of time. Antibacterial activity of CuNPs was observed on a multispecies biofilm, detecting an immediate action and over-time effect, gradually reaching their highest efficacy on day 7 after application. The latter raises the possibility of the emergence of Ca(OH)₂-resistant strains and supports the use of CuNPs as alternative intracanal medication.

In silico nanosafety assessment tools and their ecosystem-level integration prospect

Engineered nanomaterials (ENMs) have tremendous potential in many fields, but their applications and commercialization are difficult to widely implement due to their safety concerns. Recently, in silico nanosafety assessment has become an important and necessary tool to realize the safer-by-design strategy of ENMs and at the same time to reduce animal tests and exposure experiments. Here, in silico nanosafety assessment tools are classified into three categories according to their methodologies and objectives, including (i) data-driven prediction for acute toxicity, (ii) fate modeling for environmental pollution, and (iii) nano-biological interaction modeling for long-term biological effects. Released ENMs may cross environmental boundaries and undergo a variety of transformations in biological and environmental media. Therefore, the potential impacts of ENMs must be assessed from a multimedia perspective and with integrated approaches considering environmental and biological effects. Ecosystems with biodiversity and an abiotic environment may be used as an excellent integration platform to assess the community- and ecosystem-level nanosafety. In this review, the advances and challenges of in silico nanosafety assessment tools are carefully discussed. Furthermore, their integration at the ecosystem level may provide more comprehensive and reliable nanosafety assessment by establishing a site-specific interactive system among ENMs, abiotic environment, and biological communities.

NanoTox: Development of a Parsimonious In Silico Model for Toxicity Assessment of Metal-Oxide Nanoparticles Using Physicochemical Features

Metal-oxide nanoparticles find widespread applications in mundane life today, and cost-effective evaluation of their cytotoxicity and ecotoxicity is essential for sustainable progress. Machine learning models use existing experimental data and learn quantitative feature-toxicity relationships to yield predictive models. In this work, we adopted a principled approach to this problem by formulating a novel feature space based on intrinsic and extrinsic physicochemical properties, including periodic table properties but exclusive of in vitro characteristics such as cell line, cell type, and assay method. An optimal hypothesis space was developed by applying variance inflation analysis to the correlation structure of the features. Consequent to a stratified train-test split, the training dataset was balanced for the toxic outcomes and a mapping was then achieved from the normalized feature space to the toxicity class using various hyperparameter-tuned machine learning models, namely, logistic regression, random forest, support vector machines, and neural networks. Evaluation on an unseen test set yielded >96% balanced accuracy for the random forest, and neural network with one-hidden-layer models. The obtained cytotoxicity models are parsimonious, with intelligible inputs, and an embedded applicability check. Interpretability investigations of the models identified the key predictor variables of metal-oxide nanoparticle cytotoxicity. Our models could be applied on new, untested oxides, using a majority-voting ensemble classifier, NanoTox, that incorporates the best of the above models. NanoTox is the first open-source nanotoxicology pipeline, freely available under the GNU General Public License (https://github.com/NanoTox).

Molecular characterization and antibacterial activity of oral antibiotics and copper nanoparticles against endodontic pathogens commonly related to health care-associated infections

OBJECTIVE

To carry out molecular characterization and determine the antibacterial activity of oral antibiotics and copper nanoparticles (Cu-NPs) against endodontic strains isolated from persistent infections.

MATERIALS AND METHODS

Root canal samples from 24 teeth in different patients with persistent endodontic infections were obtained. The isolated strains were identified by biochemical tests and 16S rDNA sequencing. Genotyping was achieved by molecular methods. The antibacterial activity of antibiotics and copper nanostructures was determined by using minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values. Furthermore, a time-kill kinetics assay was evaluated. Nonparametric tests (Kruskal-Wallis ANOVA) were performed (p value <0.05).

RESULTS

Twenty-one isolated strains were identified. Six isolates of Enterococcus faecalis were grouped into two clusters of three isolates each, two of which were clones. All were clarithromycin-resistant and erythromycin. Eight Pseudomonas putida presented two clusters, two Pseudomonas spp. were not clonal, and all were resistant to the tested antibiotics except tetracycline. Two of five strains of Cutibacterium acnes were clonal, and all were resistant only to metronidazole. The lowest MIC and MBC values were obtained with Cu-NPs. Time-kill kinetics using Cu-NPs showed a significant decrease in all tested species within 4 h and reached 100% in 2 h for C. acnes.

CONCLUSION

In this study, in relation to health care-associated infections, endodontic strains of each species isolated at least in one patient were polyclonal. In Pseudomonas spp., at least one clone was shared between patients. E. faecalis and C. acnes strains were susceptible to low Cu-NP concentrations, while Pseudomonas spp. strains were resistant.

CLINICAL RELEVANCE

Assessing and keeping track of the susceptibility of clinical strains to antimicrobial compounds is important for the clinical outcome. Based on our results, Cu-NPs could be an alternative for endodontic treatment, in order to avoid selection of resistant strains.

Understanding nano-engineered particle-cell interactions: biological insights from mathematical models

Understanding the interactions between nano-engineered particles and cells is necessary for the rational design of particles for therapeutic, diagnostic and imaging purposes. In particular, the informed design of particles relies on the quantification of the relationship between the physicochemical properties of the particles and the rate at which cells interact with, and subsequently internalise, particles. Quantitative models, both mathematical and computational, provide a powerful tool for elucidating this relationship, as well as for understanding the mechanisms governing the intertwined processes of interaction and internalisation. Here we review the different types of mathematical and computational models that have been used to examine particle-cell interactions and particle internalisation. We detail the mathematical methodology for each type of model, the benefits and limitations associated with the different types of models, and highlight the advances in understanding gleaned from the application of these models to experimental observations of particle internalisation. We discuss the recent proposal and ongoing community adoption of standardised experimental reporting, and how this adoption is an important step toward unlocking the full potential of modelling approaches. Finally, we consider future directions in quantitative models of particle-cell interactions and highlight the need for hybrid experimental and theoretical investigations to address hitherto unanswered questions.

Nonspherical Metal-Based Nanoarchitectures: Synthesis and Impact of Size, Shape, and Composition on Their Biological Activity

Metal-based nanoentities, apart from being indispensable research tools, have found extensive use in the industrial and biomedical arena. Because their biological impacts are governed by factors such as size, shape, and composition, such issues must be taken into account when these materials are incorporated into multi-component ensembles for clinical applications. The size and shape (rods, wires, sheets, tubes, and cages) of metallic nanostructures influence cell viability by virtue of their varied geometry and physicochemical interactions with mammalian cell membranes. The anisotropic properties of nonspherical metal-based nanoarchitectures render them exciting candidates for biomedical applications. Here, the size-, shape-, and composition-dependent properties of nonspherical metal-based nanoarchitectures are reviewed in the context of their potential applications in cancer diagnostics and therapeutics, as well as, in regenerative medicine. Strategies for the synthesis of nonspherical metal-based nanoarchitectures and their cytotoxicity and immunological profiles are also comprehensively appraised.

An integrated approach to testing and assessment of high aspect ratio nanomaterials and its application for grouping based on a common mesothelioma hazard

Here we describe the development of an Integrated Approach to Testing and Assessment (IATA) to support the grouping of different types (nanoforms; NFs) of High Aspect Ratio Nanomaterials (HARNs), based on their potential to cause mesothelioma. Hazards posed by the inhalation of HARNs are of particular concern as they exhibit physical characteristics similar to pathogenic asbestos fibres. The approach for grouping HARNs presented here is part of a framework to provide guidance and tools to group similar NFs and aims to reduce the need to assess toxicity on a case-by-case basis. The approach to grouping is hypothesis-driven, in which the hypothesis is based on scientific evidence linking critical physicochemical descriptors for NFs to defined fate/toxicokinetic and hazard outcomes. The HARN IATA prompts users to address relevant questions (at decision nodes; DNs) regarding the morphology, biopersistence and inflammatory potential of the HARNs under investigation to provide the necessary evidence to accept or reject the grouping hypothesis. Each DN in the IATA is addressed in a tiered manner, using data from simple in vitro or in silico methods in the lowest tier or from in vivo approaches in the highest tier. For these proposed methods we provide justification for the critical descriptors and thresholds that allow grouping decisions to be made. Application of the IATA allows the user to selectively identify HARNs which may pose a mesothelioma hazard, as demonstrated through a literature-based case study. By promoting the use of alternative, non-rodent approaches such as in silico modelling, in vitro and cell-free tests in the initial tiers, the IATA testing strategy streamlines information gathering at all stages of innovation through to regulatory risk assessment while reducing the ethical, time and economic burden of testing.

Decrease in membrane fluidity and traction force induced by silica-coated magnetic nanoparticles

Background

Nanoparticles are being increasingly used in biomedical applications owing to their unique physical and chemical properties and small size. However, their biophysical assessment and evaluation of side-effects remain challenging. We addressed this issue by investigating the effects of silica-coated magnetic nanoparticles containing rhodamine B isothiocyanate [MNPs@SiO₂(RITC)] on biophysical aspects, such as membrane fluidity and traction force of human embryonic kidney 293 (HEK293) cells. We further extended our understanding on the biophysical effects of nanoparticles on cells using a combination of metabolic profiling and transcriptomic network analysis.

Results

Overdose (1.0 μg/µL) treatment with MNPs@SiO₂(RITC) induced lipid peroxidation and decreased membrane fluidity in HEK293 cells. In addition, HEK293 cells were morphologically shrunk, and their aspect ratio was significantly decreased. We found that each traction force (measured in micropillar) was increased, thereby increasing the total traction force in MNPs@SiO₂(RITC)-treated HEK293 cells. Due to the reduction in membrane fluidity and elevation of traction force, the velocity of cell movement was also significantly decreased. Moreover, intracellular level of adenosine triphosphate (ATP) was also decreased in a dose-dependent manner upon treatment with MNPs@SiO₂(RITC). To understand these biophysical changes in cells, we analysed the transcriptome and metabolic profiles and generated a metabotranscriptomics network, which revealed relationships among peroxidation of lipids, focal adhesion, cell movement, and related genes and metabolites. Furthermore, in silico prediction of the network showed increment in the peroxidation of lipids and suppression of focal adhesion and cell movement.

Conclusion

Taken together, our results demonstrated that overdose of MNPs@SiO₂(RITC) impairs cellular movement, followed by changes in the biophysical properties of cells, thus highlighting the need for biophysical assessment of nanoparticle-induced side-effects.

Effect of silica-coated magnetic nanoparticles on rigidity sensing of human embryonic kidney cells

BACKGROUND

Nanoparticles (NPs) can enter cells and cause cellular dysfunction. For example, reactive oxygen species generated by NPs can damage the cytoskeleton and impair cellular adhesion properties. Previously, we reported that cell spreading and protrusion structures such as lamellipodia and filopodia was reduced when cells are treated with silica-coated magnetic nanoparticles incorporating rhodamine B isothiocyanate (MNPs@SiO2(RITC)), even at 0.1 μg/μL. These protruded structures are involved in a cell's rigidity sensing, but how these NPs affect rigidity sensing is unknown.

RESULTS

Here, we report that the rigidity sensing of human embryonic kidney (HEK293) cells was impaired even at 0.1 μg/μL of MNPs@SiO2(RITC). At this concentration, cells were unable to discern the stiffness difference between soft (5 kPa) and rigid (2 MPa) flat surfaces. The impairment of rigidity sensing was further supported by observing the disappearance of locally contracted elastomeric submicron pillars (900 nm in diameter, 2 μm in height, 24.21 nN/μm in stiffness k) under MNPs@SiO2(RITC) treated cells. A decrease in the phosphorylation of paxillin, which is involved in focal adhesion dynamics, may cause cells to be insensitive to stiffness differences when they are treated with MNPs@SiO2(RITC).

CONCLUSIONS

Our results suggest that NPs may impair the rigidity sensing of cells even at low concentrations, thereby affecting cell adhesion and spreading.

Benchmark dose analyses of toxic endpoints in lung cells provide sensitivity and toxicity ranking across metal oxide nanoparticles and give insights into the mode of action

INTRODUCTION

The benchmark dose (BMD) is a dose that produces a predetermined change in the response rate of an adverse effect. This approach is increasingly utilized to analyze quantitative dose-response relationships. To proof this concept, statistical analysis was compared with the BMD approach in order to rank the sensitivity as well as the toxicity and to describe the mode of action.

METHODS

Bronchial (BEAS-2B) and alveolar epithelial cells (A549) were exposed to a wide concentration range (0.4-100 μg/mL) of five metal oxide nanoparticles (CeO₂, CuO, TiO₂, ZnO, ZrO₂). Eight toxicity endpoints were determined representing integrity of lysosomal and cell membrane, oxidative stress level, glutathione based detoxification (glutathione S-transferase), oxidative metabolism (cytochrome P450), alteration of the mitochondrial membrane potential, alteration of phase II antioxidative enzyme (NAD(P)H:quinone oxidoreductase), and de novo DNA synthesis.

RESULTS

Based on the BMD calculated for the most sensitive test, the toxicity decreased in the following order: ZnO > CuO > TiO₂>ZrO₂>CeO₂ in BEAS-2B. Both statistical evaluation methods revealed a higher sensitivity of BEAS-2B cells. The BMD-derived mode of action for CuO confirmed the existing hypotheses and provided insights into less known mechanisms.

CONCLUSION

The findings proofed that BMD analysis is an effective tool to evaluate different aspects of risk assessment.

NanoPASS: an easy-to-use user interface for nanoparticle dosimetry with the 3DSDD model

Nanoparticles exhibit a specific diffusion and sedimentation behavior under cell culture conditions as used in nantoxicological in vitro testing. How a particular particle suspension behaves depends on the particular physicochemical characteristics of the particles and the cell culture system. Only a fraction of the nanoparticles applied to a cell culture will thus reach the cells within a given time frame. Therefore, dosimetric calculations are essential not only to determine the exact fraction of nanoparticles that has come into contact with the cells, but also to ensure experimental comparability and correct interpretation of results, respectively. Yet, the use of published dosimetry models is limited. Not the least because the correct application of these in silico tools usually requires bioinformatics knowledge, which often is perceived a hurdle. Moreover, not all models are freely available and accessible. In order to overcome this obstacle, we have now developed an easy-to-use interface for our recently published 3DSDD dosimetry model, called NanoPASS (NanoParticle Administration Sedimentation Simulator). The interface is freely available to all researchers. It will facilitate the use of in silico dosimetry in nanotoxicology and thus improve interpretation and comparability of in vitro results in the field.

Uniting Drug and Delivery: Metal Oxide Hybrid Nanotherapeutics for Skin Wound Care

Wound care and soft tissue repair have been a major human concern for millennia. Despite considerable advancements in standards of living and medical abilities, difficult-to-heal wounds remain a major burden for patients, clinicians and the healthcare system alike. Due to an aging population, the rise in chronic diseases such as vascular disease and diabetes, and the increased incidence of antibiotic resistance, the problem is set to worsen. The global wound care market is constantly evolving and expanding, and has yielded a plethora of potential solutions to treat poorly healing wounds. In ancient times, before such a market existed, metals and their ions were frequently used in wound care. In combination with plant extracts, they were used to accelerate the healing of burns, cuts and combat wounds. With the rise of organic chemistry and small molecule drugs and ointments, researchers lost their interest in inorganic materials. Only recently, the advent of nano-engineering has given us a toolbox to develop inorganic materials on a length-scale that is relevant to wound healing processes. The robustness of synthesis, as well as the stability and versatility of inorganic nanotherapeutics gives them potential advantages over small molecule drugs. Both bottom-up and top-down approaches have yielded functional inorganic nanomaterials, some of which unite the wound healing properties of two or more materials. Furthermore, these nanomaterials do not only serve as the active agent, but also as the delivery vehicle, and sometimes as a scaffold. This review article provides an overview of inorganic hybrid nanotherapeutics with promising properties for the wound care field. These therapeutics include combinations of different metals, metal oxides and metal ions. Their production, mechanism of action and applicability will be discussed in comparison to conventional wound healing products.

Comparison of Enhanced Photocatalytic Degradation Efficiency and Toxicity Evaluations of CeO2 Nanoparticles Synthesized Through Double-Modulation

We demonstrated that Fe/Cr doped and pH-modified CeO₂ nanoparticles (NPs) exhibit enhanced photocatalytic performance as compared to bare CeO₂ NPs, using photocatalytic degradation. To assess the toxicity level of these double-modified CeO₂ NPs on the human skin, they were introduced into HaCaT cells. The results of our conventional cellular toxicity assays (neutral red uptake and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide for assays) indicated that Cr@CeO_x NPs prompt severe negative effects on the viability of human cells. Moreover, the results obtained by scanning transmission X-ray microscopy and bio-transmission electron microscope analysis showed that most of the NPs were localized outside the nucleus of the cells. Thus, serious genetic toxicity was unlikely. Overall, this study highlights the need to prevent the development of Cr@CeO_x NP toxicity. Moreover, further research should aim to improve the photocatalytic properties and activity of these NPs while accounting for their stability issues.

Continued Efforts on Nanomaterial-Environmental Health and Safety Is Critical to Maintain Sustainable Growth of Nanoindustry

Nanotechnology is enjoying an impressive growth and the global nanotechnology industry is expected to exceed US$ 125 billion by 2024. Based on these successes, there are notions that enough is known and efforts on engineered nanomaterial environmental health and safety (nano-EHS) research should be put on the back burner. However, there are recent events showing that it is not the case. The US Food and Drug Administration found ferumoxytol (carbohydrate-coated superparamagnetic iron oxide nanoparticle) for anemia treatment could induce lethal anaphylactic reactions. The European Union will categorize TiO2 as a category 2 carcinogen due to its inhalation hazard and France banned use of TiO2 (E171) in food from January 1, 2020 because of its carcinogenic potential. Although nanoindustry is seemingly in a healthy state, growth could be hindered for the lack of certainty and more nano-EHS research is needed for the sustainable growth of nanoindustry. Herein, the current knowledge gaps and the way forward are elaborated.

An Integrated In Vitro-In Silico Approach for Silver Nanoparticle Dosimetry in Cell Cultures

Potential human and environmental hazards resulting from the exposure of living organisms to silver nanoparticles (Ag NPs) have been the subject of intensive discussion in the last decade. Despite the growing use of Ag NPs in biomedical applications, a quantification of the toxic effects as a function of the total silver mass reaching cells (namely, target cell dose) is still needed. To provide a more accurate dose-response analysis, we propose a novel integrated approach combining well-established computational and experimental methodologies. We first used a particokinetic model (ISD3) for providing experimental validation of computed Ag NP sedimentation in static-cuvette experiments. After validation, ISD3 was employed to predict the total mass of silver reaching human endothelial cells and hepatocytes cultured in 96 well plates. Cell viability measured after 24 h of culture was then related to this target cell dose. Our results show that the dose perceived by the cell monolayer after 24 h of exposure is around 85% lower than the administered nominal media concentration. Therefore, accurate dosimetry considering particle characteristics and experimental conditions (e.g., time, size and shape of wells) should be employed for better interpreting effects induced by the amount of silver reaching cells.

Toxicity assessment of metal oxide nanomaterials using in vitro screening and murine acute inhalation studies

Characterizations and in vitro toxicity screening were performed on metal oxide engineered nanomaterials (ENMs) independently comprising ZnO, CuO, CeO₂, Fe₂O₃, WO₃, V₂O₅, TiO₂, Al₂O₃ and MgO. Nanomaterials that exhibited the highest toxicity responses in the in vitro screening assays (ZnO, CuO, and V₂O₅) and the lesser explored material WO₃ were tested for acute pulmonary toxicity in vivo. Female and male mice (C57Bl/6J) were exposed to aerosolized metal oxide ENMs in a nose-only exposure system and toxicity outcomes (biomarkers of cytotoxicity, immunotoxicity, inflammation, and lung histopathology) at 4 and 24 h after the start of exposure were assessed. The studies were performed as part of the NIEHS Nanomaterials Health Implications Research consortium with the purpose of investigating the effects of ENMs on various biological systems. ENMs were supplied by the Engineered Nanomaterials Resource and Coordination Core. Among the ENMs studied, the highest toxicity was observed for CuO and ZnO NPs in both in vitro and in vivo acute models. Compared to sham-exposed controls, there was a significant increase in bronchoalveolar lavage neutrophils and proinflammatory cytokines and a loss of macrophage viability at both 4 h and 24 h for ZnO and CuO but not seen for V₂O₅ or WO₃. These effects were observed in both female and male mice. The cell viability performed after in vitro exposure to ENMs and assessment of lung inflammation after acute inhalation exposure in vivo were shown to be sensitive endpoints to predict ENM acute toxicity.

ZnO nanocrystals derived from organometallic approach: Delineating the role of organic ligand shell on physicochemical properties and nano-specific toxicity

The surface organic ligands have profound effect on modulation of different physicochemical parameters as well as toxicological profile of semiconductor nanocrystals (NCs). Zinc oxide (ZnO) is one of the most versatile semiconductor material with multifarious potential applications and systematic approach to in-depth understand the interplay between ZnO NCs surface chemistry along with physicochemical properties and their nano-specific toxicity is indispensable for development of ZnO NCs-based devices and biomedical applications. To this end, we have used recently developed the one-pot self-supporting organometallic (OSSOM) approach as a model platform to synthesize a series of ZnO NCs coated with three different alkoxyacetate ligands with varying the ether tail length which simultaneously act as miniPEG prototypes. The ligand coating influence on ZnO NCs physicochemical properties including the inorganic core size, the hydrodynamic diameter, surface charge, photoluminescence (quantum yield and decay time) and ZnO NCs biological activity toward lung cells was thoroughly investigated. The resulting ZnO NCs with average core diameter of 4-5 nm and the hydrodynamic diameter of 8-13 nm exhibit high photoluminescence quantum yield reaching 33% and a dramatic slowing down of charge recombination up to 2.4 µs, which is virtually unaffected by the ligand's character. Nano-specific ZnO NCs-induced cytotoxicity was tested using MTT assay with normal (MRC-5) and cancer (A549) human lung cell lines. Noticeably, no negative effect has been observed up to the NCs concentration of 10 µg/mL and essentially very low negative toxicological impact could be noticed at higher concentrations. In the latter case, the MTT data analysis indicate that there is a subtle interconnection between inorganic core-organic shell dimensions and toxicological profile of ZnO NCs (strikingly, the NCs coated by the carboxylate bearing a medium ether chain length exhibit the lowest toxicity level). The results demonstrate that, when fully optimized, our organometallic self-supporting approach can be a highly promising method to obtain high-quality and bio-stable ligand-coated ZnO NCs.

The cytotoxicities in prokaryote and eukaryote varied for CdSe and CdSe/ZnS quantum dots and differed from cadmium ions

The present study focused on the bioaccumulation and cytotoxicities of Cd²⁺, CdSe quantum dots (QDs) and CdSe/ZnS QDs in Escherichia coli (E. coli, represents prokaryotic system) and Phanerochaete chrysosporium (P. chrysosporium, represents eukaryotic system), respectively. Two types of QDs were characterized by transmission electron microscopy (TEM) and dynamic light scattering. The inductively coupled plasma optical emission spectrometer results showed that the bioaccumulation amounts of CdSe QDs by E. coli and P. chrysosporium were larger than those of CdSe/ZnS QDs due to the smaller particle size and less negative surface charges of CdSe QDs. Confocal microscopy and TEM results showed that there was an interaction between QDs and cells, and QDs have entered into the cells eventually, leading to the change of cell morphology. Plasma membrane fluidities and membrane H⁺-ATPase activities of E. coli and P. chrysosporium decreased gradually with the increasing concentrations of Cd²⁺, CdSe and CdSe/ZnS QDs. Results of the cell viabilities and intracellular reactive oxygen species levels indicated that the induced cytotoxicities were decreased as follows: CdSe QDs > CdSe/ZnS QDs > Cd²⁺. These findings suggested that the cytotoxicity of QDs was not only attributed to their heavy metal components, but also related to their nanosize effects which could induce particle-specific toxicity. The above results offer valuable information for exploring the cytotoxicity mechanism of QDs in prokaryote and eukaryote.

Determination of Silver Nanoparticle Dose in vitro

An important issue for interpreting in vitro nanomaterial testing is quantifying the dose delivered to target cells. Considerations include the concentration added to the culture, the proportion of the applied dose that interacts with the target cells, and the amount that is eventually absorbed by the target cells. Rapid and efficient techniques are needed to determine delivered doses. Previously, we demonstrated that TiO₂ and silver nanoparticles (AgNP) were absorbed by cells in a dose dependent manner between 1 μg/ml and 30 μg/ml and were detected in cells by light scatter using a flow cytometer. Here, we compare four potential indices of the dose of AgNP to cells, including: inductively coupled plasma - mass spectrometry (ICP-MS); flow cytometry side scatter (SSC); and amount of silver deposited to the cell layer as estimated with both an integrated Volumetric Centrifugation Method - In Vitro Sedimentation, Diffusion and Dosimetry Model (VCM-ISDD) and a Distorted Grid (DG) model. A retinal pigment epithelial cell line was exposed to 20 nm or 75 nm citrate-coated AgNP for 24 hr. The relationships between particle sizes and internalized doses varied according to the dose metric. Twenty-four hours after exposure, the cell layer contained a greater mass of silver when treated with 75 nm AgNP than with 20 nm AgNP. When the dose was expressed as the number of particles or as the total surface area of absorbed particles, however, the reverse was true; the dose to the cells was higher after exposure to 20 than 75 nm AgNP. Flow cytometry SSC increased with dose for both sizes of AgNP, and was correlated with Ag in cells measured by ICP-MS. The rate of SSC increase was greater for 75 than for 20 nm AgNP, suggesting it could be used as an indicator of cellular dose after accounting for particle size and composition. Silver was detected by ICP-MS in re-suspended supernates of the isolated cell layer suggested that not all the silver deposited to the cell layer was absorbed by the cells. Both the VCM-ISDD and DG models estimated the proportion of Ag deposited to the cellular layer, which in both cases was greater than the amount of silver in the cells measured by ICP-MS. Modeled deposition more closely compared to the total Ag deposition by ICP-MS, i.e. mass of silver in the cells plus the resuspended, unabsorbed Ag from the cell layer. ICP-MS indicated the mass of silver in cells from AgNP treatment, but not whether the Ag was in the form of particles or dissolved ions. Deposition models predicted the amount of AgNP deposited to the cell layer, but not cellular uptake. Flow cytometry SSC was correlated to cellular uptake of particle-form AgNP and could be calibrated against ICP-MS to indicate mass of cellular uptake. Therefore, a combination of approaches may be required to accurately understand cellular dosimetry of in vitro nanotoxicology experiments. In summary, cellular dosimetry is an important consideration for nanotoxicology experiments, and not necessarily related to the applied dose.

Physicochemical Properties Can Be Key Determinants of Mesoporous Silica Nanoparticle Potency in Vitro

Nanoforms of mesoporous silica (mSiNPs) are increasingly applied in medicine, imaging, energy storage, catalysis, biosensors, and bioremediation. The impact of their physicochemical properties on health and the environment remain to be elucidated. In this work, newly synthesized mesoporous silica (sizes: 25, 70, 100, 170, and 600 nm; surface functionalization: pristine, C3-, and C11-COOH moieties) were assessed for cytotoxicity and induction of inflammatory responses in vitro (A549, THP-1, J774A.1 cells). All toxicity end points were integrated to obtain simple descriptors of biological potencies of these mSiNPs. The findings indicate that mSiNPs are less bioactive than the nonporous reference SiNP used in this study. The C3-COOH-modified mSiNPs were generally less cytotoxic than their pristine and C11-modified counterparts in the nanorange (≤100 nm). Carboxyl-modified mSiNPs affected inflammatory marker release across all sizes with cell-type specificity, suggesting a potential for immunomodulatory effects. Surface area, size, extent of agglomeration, ζ-potential, and surface modification appeared to be important determinants of cytotoxicity of mSiNPs based on association tests. Pathway analysis identified particle and cell-type-specific alteration of cellular pathways and functions by mSiNPs. The integration of exposure-related biological responses of multiple cell lines to mSiNPs allowed for a comprehensive evaluation of the impact of physicochemical factors on their toxicity characteristics. The integrated multilevel toxicity assessment approach can be valuable as a hazard screening tool for safety evaluations of emerging nanomaterials for regulatory purpose.

A 3D human lung-on-a-chip model for nanotoxicity testing

The prevalent application of nanoparticles (NPs) has drawn intense concerns about their impact on the environment and human health. Inhalation of NPs is the major route of NP exposure and has led to adverse effects on the lung. It is of great concern to evaluate the potential hazards of nanoparticles for human health during pulmonary exposure. Here, we proposed a novel 3D human lung-on-a-chip model to recreate the organ-level structure and functions of the human lung that allow to us evaluate the pulmonary toxicity of nanoparticles. The lung-on-a-chip consists of three parallel channels for the co-culture of human vascular endothelial cells and human alveolar epithelial cells sandwiching a layer of Matrigel membrane, which recapitulate the key features of the alveolar capillary barrier in the human lung. Cell-cell interaction, cell-matrix interaction and vascular mechanical cues work synergistically to promote the barrier function of the lung-on-a-chip model. TiO2 nanoparticles and ZnO nanoparticles were applied on the lung-on-a-chip to assay their nanotoxicity on both epithelial cells and endothelial cells. Junction protein expression, increased permeability to macromolecules, dose dependent cytotoxicity, ROS production and apoptosis were assayed and compared on the chip. This lung-on-a-chip model indicated its versatile application in human pulmonary health and safety assessment for nanoparticles, environment, food and drugs.

In vitro nanoparticle dosimetry for adherent growing cell monolayers covering bottom and lateral walls

Background

Even though a continuously high number of in vitro studies on nanoparticles are being published, the issue of correct dose matter is often not sufficiently taken into account. Due to their size, the diffusion of nanoparticles is slower, as compared to soluble chemicals, and they sediment slowly. Therefore, the administered dose of particles in in vitro experiments is not necessarily the same (effective) dose that comes into contact with the cellular system. This can lead to misinterpretations of experimental toxic effects and disturbs the meaningfulness of in vitro studies. In silico calculations of the effective nanoparticle dose can help circumventing this problem.

Results

This study addresses more complex in vitro models like the human intestinal cell line Caco-2 or the human liver cell line HepaRG, which need to be differentiated over a few weeks to reach their full complexity. During the differentiation time the cells grow up the wall of the cell culture dishes and therefore a three-dimensional-based in silico model of the nanoparticle dose was developed to calculate the administered dose received by different cell populations at the bottom and the walls of the culture dish. Moreover, the model can perform calculations based on the hydrodynamic diameter which is measured by light scattering methods, or based on the diffusion coefficient measured by nanoparticle tracking analysis (NTA). This 3DSDD (3D-sedimentation-diffusion-dosimetry) model was experimentally verified against existing dosimetry models and was applied to differentiated Caco-2 cells incubated with silver nanoparticles.

Conclusions

The 3DSDD accounts for the 3D distribution of cells in in vitro cell culture dishes and is therefore suitable for differentiated cells. To encourage the use of dosimetry calculating software, our model can be downloaded from the supporting information.

Electronic supplementary material

The online version of this article (10.1186/s12989-018-0278-9) contains supplementary material, which is available to authorized users.

Carbonaceous Nanomaterials Have Higher Effects on Soybean Rhizosphere Prokaryotic Communities During the Reproductive Growth Phase than During Vegetative Growth

Carbonaceous nanomaterials (CNMs) can affect agricultural soil prokaryotic communities, but how the effects vary with the crop growth stage is unknown. To investigate this, soybean plants were cultivated in soils amended with 0, 0.1, 100, or 1000 mg kg-1 of carbon black, multiwalled carbon nanotubes (MWCNTs), or graphene. Soil prokaryotic communities were analyzed by Illumina sequencing at day 0 and at the soybean vegetative and reproductive stages. The sequencing data were functionally annotated using the functional annotation of prokaryotic taxa (FAPROTAX) database. The prokaryotic communities were unaffected at day 0 and were altered at the plant vegetative stage only by 0.1 mg kg-1 MWCNTs. However, at the reproductive stage, when pods were filling, most treatments (except 1000 mg kg-1 MWCNTs) altered the prokaryotic community composition, including functional groups associated with C, N, and S cycling. The lower doses of CNMs, which were previously shown to be less agglomerated and thus more bioavailable in soil relative to the higher doses, were more effective toward both overall communities and individual functional groups. Taken together, prokaryotic communities in the soybean rhizosphere can be significantly phylogenetically and functionally altered in response to bioavailable CNMs, especially when soybean plants are actively directing resources to seed production.

Characterizing risk assessments for the development of occupational exposure limits for engineered nanomaterials

The commercialization of engineered nanomaterials (ENMs) began in the early 2000's. Since then the number of commercial products and the number of workers potentially exposed to ENMs is growing, as is the need to evaluate and manage the potential health risks. Occupational exposure limits (OELs) have been developed for some of the first generation of ENMs. These OELs have been based on risk assessments that progressed from qualitative to quantitative as nanotoxicology data became available. In this paper, that progression is characterized. It traces OEL development through the qualitative approach of general groups of ENMs based primarily on read-across with other materials to quantitative risk assessments for nanoscale particles including titanium dioxide, carbon nanotubes and nanofibers, silver nanoparticles, and cellulose nanocrystals. These represent prototypic approaches to risk assessment and OEL development for ENMs. Such substance-by-substance efforts are not practical given the insufficient data for many ENMs that are currently being used or potentially entering commerce. Consequently, categorical approaches are emerging to group and rank ENMs by hazard and potential health risk. The strengths and limitations of these approaches are described, and future derivations and research needs are discussed. Critical needs in moving forward with understanding the health effects of the numerous EMNs include more standardized and accessible quantitative data on the toxicity and physicochemical properties of ENMs.

Inorganic Nanomaterials for Soft Tissue Repair and Regeneration

Inorganic nanomaterials have witnessed significant advances in areas of medicine including cancer therapy, imaging, and drug delivery, but their use in soft tissue repair and regeneration is in its infancy. Metallic, ceramic, and carbon allotrope nanoparticles have shown promise in facilitating tissue repair and regeneration. Inorganic nanomaterials have been employed to improve stem cell engraftment in cellular therapy, material mechanical stability in tissue repair, electrical conductivity in nerve and cardiac regeneration, adhesion strength in tissue approximation, and antibacterial capacity in wound dressings. These nanomaterials have also been used to improve or replace common surgical materials and restore functionality to damaged tissue. We provide a comprehensive overview of inorganic nanomaterials in tissue repair and regeneration, and discuss their promise and limitations for eventual translation to the clinic.

Mobility and settling rate of agglomerates of polydisperse nanoparticles

Agglomerate settling impacts nanotoxicology and nanomedicine as well as the stability of engineered nanofluids. Here, the mobility of nanostructured fractal-like SiO₂ agglomerates in water is investigated and their settling rate in infinitely dilute suspensions is calculated by a Brownian dynamics algorithm tracking the agglomerate translational and rotational motion. The corresponding friction matrices are obtained using the HYDRO++ algorithm [J. G. de la Torre, G. del Rio Echenique, and A. Ortega, J. Phys. Chem. B 111, 955 (2007)] from the Kirkwood-Riseman theory accounting for hydrodynamic interactions of primary particles (PPs) through the Rotne-Prager-Yamakawa tensor, properly modified for polydisperse PPs. Agglomerates are generated by an event-driven method and have constant mass fractal dimension but varying PP size distribution, mass, and relative shape anisotropy. The calculated diffusion coefficient from HYDRO++ is used to obtain the agglomerate mobility diameter d_m and is compared with that from scaling laws for fractal-like agglomerates. The ratio d_m/d_g of the mobility diameter to the gyration diameter of the agglomerate decreases with increasing relative shape anisotropy. For constant d_m and mean d_p, the agglomerate settling rate, u_s, increases with increasing PP geometric standard deviation σ_p,g (polydispersity). A linear relationship between u_s and agglomerate mass to d_m ratio, m/d_m, is revealed and attributed to the fast Brownian rotation of such small and light nanoparticle agglomerates. An analytical expression for the u_s of agglomerates consisting of polydisperse PPs is then derived, u_s=1-ρ_fρ_pg3πμmd_m (ρ_f is the density of the fluid, ρ_p is the density of PPs, μ is the viscosity of the fluid, and g is the acceleration of gravity), valid for agglomerates for which the characteristic rotational time is considerably shorter than their settling time. Our calculations demonstrate that the commonly made assumption of monodisperse PPs underestimates u_s by a fraction depending on σ_p,g and agglomerate mass mobility exponent. Simulations are in excellent agreement with deposition rate measurements of fumed SiO₂ agglomerates in water.

ISD3: a particokinetic model for predicting the combined effects of particle sedimentation, diffusion and dissolution on cellular dosimetry for in vitro systems

BACKGROUND

The development of particokinetic models describing the delivery of insoluble or poorly soluble nanoparticles to cells in liquid cell culture systems has improved the basis for dose-response analysis, hazard ranking from high-throughput systems, and now allows for translation of exposures across in vitro and in vivo test systems. Complimentary particokinetic models that address processes controlling delivery of both particles and released ions to cells, and the influence of particle size changes from dissolution on particle delivery for cell-culture systems would help advance our understanding of the role of particles and ion dosimetry on cellular toxicology. We developed ISD3, an extension of our previously published model for insoluble particles, by deriving a specific formulation of the Population Balance Equation for soluble particles.

RESULTS

ISD3 describes the time, concentration and particle size dependent dissolution of particles, their delivery to cells, and the delivery and uptake of ions to cells in in vitro liquid test systems. We applied the model to calculate the particle and ion dosimetry of nanosilver and silver ions in vitro after calibration of two empirical models, one for particle dissolution and one for ion uptake. Total media ion concentration, particle concentration and total cell-associated silver time-courses were well described by the model, across 2 concentrations of 20 and 110 nm particles. ISD3 was calibrated to dissolution data for 20 nm particles as a function of serum protein concentration, but successfully described the media and cell dosimetry time-course for both particles at all concentrations and time points. We also report the finding that protein content in media affects the initial rate of dissolution and the resulting near-steady state ion concentration in solution for the systems we have studied.

CONCLUSIONS

By combining experiments and modeling, we were able to quantify the influence of proteins on silver particle solubility, determine the relative amounts of silver ions and particles in exposed cells, and demonstrate the influence of particle size changes resulting from dissolution on particle delivery to cells in culture. ISD3 is modular and can be adapted to new applications by replacing descriptions of dissolution, sedimentation and boundary conditions with those appropriate for particles other than silver.

Differential Contribution of Constituent Metal Ions to the Cytotoxic Effects of Fast-Dissolving Metal-Oxide Nanoparticles

The main mechanism of toxicity for fast-dissolving nanoparticles (NPs) is relatively simple as it originates from the intrinsic toxicity of their constituent elements rather than complicated surface reactivity. However, there is little information about the compared toxicity of fast-dissolving NP and its constituent ion, which is essential for understanding the mechanism of NP toxicity and the development of a structure-toxicity relationship (STR) model. Herein, we selected three types of fast-dissolving metal-oxide NPs (CoO, CuO, and ZnO) and constituent metal chlorides (CoCl₂, CuCl₂, and ZnCl₂) to compare dose-response curves between NP and its constituent metal. These materials were treated relevant cell lines for inhalation setting (i.e., differentiated THP-1 cells for macrophages and A549 cells for alveolar epithelial cells) and cytotoxicity as an endpoint was evaluated at 24 h post-incubation. The results showed that CoO and CuO NPs in both cell types showed similar patterns of dose-response curves and cytotoxic potential compared to that of their respective metal chloride. On the other hand, ZnO NPs in both cell types showed a completely different dose-response curve compared to that of ZnCl₂: ZnO NPs showed modest slope and much less potential for cytotoxicity compared to that of ZnCl₂. These results imply that fast-dissolving metal-oxide NPs are not always have similar dose-response curves and toxic potentials compared to their constituent metal chlorides and this may be due to the differential mechanism of intracellular uptake of these substances and their interaction with intracellular detoxification molecules. Further investigations are needed for the use of toxic potential of metal ions as a predicting factors of fast-dissolving NPs toxicity. In addition, chelating agent specific for dissolved metal ions can be applied for the treatment of these fast-dissolving NPs.

In vitro to in vivo benchmark dose comparisons to inform risk assessment of quantum dot nanomaterials

Engineered nanomaterials are currently under review for their potential toxicity; however, their use in consumer/commercial products has continued to outpace risk assessments. In vitro methods may be utilized as tools to improve the efficiency of risk assessment approaches. We propose a framework to compare relationships between previously published in vitro and in vivo toxicity assessments of cadmium-selenium containing quantum dots (QDs) using benchmark dose (BMD) and dosimetric assessment methods. Although data were limited this approach was useful for identifying sensitive assays and strains. In vitro studies assessed effects of QDs in three pulmonary cell types across two mouse strains. Significant dose-response effects were modeled and a standardized method of BMD analysis was performed as a function of both exposure dose and dosimetric dose. In vivo studies assessed pulmonary effects of QD exposure across eight mouse strains. BMD analysis served as a basis for relative comparison with in vitro studies. We found consistent responses in common endpoints between in vitro and in vivo studies. Strain sensitivity was consistent between in vitro and in vivo studies, showing A/J mice more sensitive to QDs. Cell types were found to differentially take up QDs. Dosimetric adjustments identified similar sensitivity among cell types. Thus, BMD analysis can be used as an effective tool to compare the sensitivity of different strains, cell types, and assays to QDs. These methods allow for in vitro assays to be used to predict in vivo responses, improve the efficiency of in vivo studies, and allow for prioritization of nanomaterial assessments. This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Effects of food-borne nanomaterials on gastrointestinal tissues and microbiota

Ingestion of engineered nanomaterials is inevitable due to their addition to food and prevalence in food packaging and domestic products such as toothpaste and sun cream. In the absence of robust dosimetry and particokinetic data, it is currently challenging to accurately assess the potential toxicity of food-borne nanomaterials. Herein, we review current understanding of gastrointestinal uptake mechanisms, consider some data on the potential for toxicity of the most commonly encountered classes of food-borne nanomaterials (including TiO2 , SiO2, ZnO, and Ag nanoparticles), and discuss the potential impact of the luminal environment on nanoparticle properties and toxicity. Much of our current understanding of gastrointestinal nanotoxicology is derived from increasingly sophisticated epithelial models that augment in vivo studies. In addition to considering the direct effects of food-borne nanomaterials on gastrointestinal tissues, including the potential role of chronic nanoparticle exposure in development of inflammatory diseases, we also discuss the potential for food-borne nanomaterials to disturb the normal balance of microbiota within the gastrointestinal tract. The latter possibility warrants close attention given the increasing awareness of the critical role of microbiota in human health and the known impact of some food-borne nanomaterials on bacterial viability. WIREs Nanomed Nanobiotechnol 2018, 10:e1481. doi: 10.1002/wnan.1481 This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials.

The biocorona: a challenge for the biomedical application of nanoparticles

Formation of the biocorona on the surface of nanoparticles is a significant obstacle for the development of safe and effective nanotechnologies, especially for nanoparticles with biomedical applications. Following introduction into a biological environment, nanoparticles are rapidly coated with biomolecules resulting in formation of the nanoparticle-biocorona. The addition of these biomolecules alters the nanoparticle's physicochemical characteristics, functionality, biodistribution, and toxicity. To synthesize effective nanotherapeutics and to more fully understand possible toxicity following human exposures, it is necessary to elucidate these interactions between the nanoparticle and the biological media resulting in biocorona formation. A thorough understanding of the mechanisms by which the addition of the biocorona governs nanoparticle-cell interactions is also required. Through elucidating the formation and the biological impact of the biocorona, the field of nanotechnology can reach its full potential. This understanding of the biocorona will ultimately allow for more effective laboratory screening of nanoparticles and enhanced biomedical applications. The importance of the nanoparticle-biocorona has been appreciated for a decade; however, there remain numerous future directions for research which are necessary for study. This perspectives article will summarize the unique challenges presented by the nanoparticle-biocorona and avenues of future needed investigation.

The role of high-throughput screening in ecotoxicology and engineered nanomaterials

The field of environmental toxicology developed as a result of growing concerns about anthropogenic influences on the environment and how to ameliorate ecological impact. Many governmental bodies are beginning to emphasize prevention rather than mitigation when addressing novel products, leading to more of a focus on identifying potential toxicity prior to release. With the exponential advances in their development and sale, novel metamaterials and biotechnology are set to dramatically outpace the capabilities of current testing strategies. To address the need for a fast, cost-effective means of testing chemicals, high-throughput screening (HTS) is currently being used in toxicology and being adapted to ecotoxicology in projects such as ToxCast and Tox21. Despite the growth of research using HTS platforms, its role in ecotoxicology is still uncertain, particularly in how it should be applied in regulation. The aim of the present review is to discuss common test strategies used in designing HTS platforms, the current potential applications for ecotoxicological research, its role in regulatory policies, and its ability to address growing concerns such as engineered nanomaterials. Environ Toxicol Chem 2017;36:1704-1714. © 2017 SETAC.

Reduction of pulmonary toxicity of metal oxide nanoparticles by phosphonate-based surface passivation

Background

The wide application of engineered nanoparticles has induced increasing exposure to humans and environment, which led to substantial concerns on their biosafety. Some metal oxides (MOx) have shown severe toxicity in cells and animals, thus safe designs of MOx with reduced hazard potential are desired. Currently, there is a lack of a simple yet effective safe design approach for the toxic MOx. In this study, we determined the key physicochemical properties of MOx that lead to cytotoxicity and explored a safe design approach for toxic MOx by modifying their hazard properties.

Results

THP-1 and BEAS-2B cells were exposed to 0–200 μg/mL MOx for 24 h, we found some toxic MOx including CoO, CuO, Ni₂O₃ and Co₃O₄, could induce reactive oxygen species (ROS) generation and cell death due to the toxic ion shedding and/or oxidative stress generation from the active surface of MOx internalized into lysosomes. We thus hypothesized that surface passivation could reduce or eliminate the toxicity of MOx. We experimented with a series of surface coating molecules and discovered that ethylenediamine tetra (methylene phosphonic acid) (EDTMP) could form stable hexadentate coordination with MOx. The coating layer can effectively reduce the surface activity of MOx with 85-99% decrease of oxidative potential, and 65-98% decrease of ion shedding. The EDTMP coated MOx show negligible ROS generation and cell death in THP-1 and BEAS-2B cells. The protective effect of EDTMP coating was further validated in mouse lungs exposed to 2 mg/kg MOx by oropharyngeal aspiration. After 40 h exposure, EDTMP coated MOx show significant decreases of neutrophil counts, lactate dehydrogenase (LDH) release, MCP-1, LIX and IL-6 in bronchoalveolar lavage fluid (BALF), compared to uncoated particles. The haematoxylin and eosin (H&E) staining results of lung tissue also show EDTMP coating could significantly reduce the pulmonary inflammation of MOx.

Conclusions

The surface reactivity of MOx including ion shedding and oxidative potential is the dominated physicochemical property that is responsible for the cytotoxicity induced by MOx. EDTMP coating could passivate the surface of MOx, reduce their cytotoxicity and pulmonary hazard effects. This coating would be an effective safe design approach for a broad spectrum of toxic MOx, which will facilitate the safe use of MOx in commercial nanoproducts.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-017-0193-5) contains supplementary material, which is available to authorized users.

Differential cytotoxic and inflammatory potency of amorphous silicon dioxide nanoparticles of similar size in multiple cell lines

The likelihood of environmental and health impacts of silicon dioxide nanoparticles (SiNPs) has risen, due to their increased use in products and applications. The biological potency of a set of similarly-sized amorphous SiNPs was investigated in a variety of cells to examine the influence of physico-chemical and biological factors on their toxicity. Cellular LDH and ATP, BrdU incorporation, resazurin reduction and cytokine release were measured in human epithelial A549, human THP-1 and mouse J774A.1 macrophage cells exposed for 24 h to suspensions of 5-15, 10-20 and 12 nm SiNPs and reference particles. The SiNPs were characterized in dry state and in suspension to determine their physico-chemical properties. The dose-response data were simplified into particle potency estimates to facilitate the comparison of multiple endpoints of biological effects in cells. Mouse macrophages were the most sensitive to SiNP exposures. Cytotoxicity of the individual cell lines was correlated while the cytokine responses differed, supported by cell type-specific differences in inflammation-associated pathways. SiNP (12 nm), the most cytotoxic and inflammogenic nanoparticle had the highest surface acidity, dry-state agglomerate size, the lowest trace metal and organics content, the smallest surface area and agglomerate size in suspension. Particle surface acidity appeared to be the most significant determinant of the overall biological activity of this set of nanoparticles. Combined with the nanoparticle characterization, integration of the biological potency estimates enabled a comprehensive determination of the cellular reactivity of the SiNPs. The approach shows promise as a useful tool for first-tier screening of SiNP toxicity.

A Framework to Account for Sedimentation and Diffusion in Particle-Cell Interactions

In vitro experiments provide a solid basis for understanding the interactions between particles and biological systems. An important confounding variable for these studies is the difference between the amount of particles administered and that which reaches the surface of cells. Here, we engineer a hydrogel-based nanoparticle system and combine in situ characterization techniques, 3D-printed cell cultures, and computational modeling to evaluate and study particle-cell interactions of advanced particle systems. The framework presented demonstrates how sedimentation and diffusion can explain differences in particle-cell association, and provides a means to account for these effects. Finally, using in silico modeling, we predict the proportion of particles that reaches the cell surface using common experimental conditions for a wide range of inorganic and organic micro- and nanoparticles. This work can assist in the understanding and control of sedimentation and diffusion when investigating cellular interactions of engineered particles.

Biological and environmental surface interactions of nanomaterials: characterization, modeling, and prediction

The understanding of nano-bio interactions is deemed essential in the design, application, and safe handling of nanomaterials. Proper characterization of the intrinsic physicochemical properties, including their size, surface charge, shape, and functionalization, is needed to consider the fate or impact of nanomaterials in biological and environmental systems. The characterizations of their interactions with surrounding chemical species are often hindered by the complexity of biological or environmental systems, and the drastically different surface physicochemical properties among a large population of nanomaterials. The complexity of these interactions is also due to the diverse ligands of different chemical properties present in most biomacromolecules, and multiple conformations they can assume at different conditions to minimize their conformational free energy. Often these interactions are collectively determined by multiple physical or chemical forces, including electrostatic forces, hydrogen bonding, and hydrophobic forces, and calls for multidimensional characterization strategies, both experimentally and computationally. Through these characterizations, the understanding of the roles surface physicochemical properties of nanomaterials and their surface interactions with biomacromolecules can play in their applications in biomedical and environmental fields can be obtained. To quantitatively decipher these physicochemical surface interactions, computational methods, including physical, statistical, and pharmacokinetic models, can be used for either analyses of large amounts of experimental characterization data, or theoretical prediction of the interactions, and consequent biological behavior in the body after administration. These computational methods include molecular dynamics simulation, structure-activity relationship models such as biological surface adsorption index, and physiologically-based pharmacokinetic models. WIREs Nanomed Nanobiotechnol 2017, 9:e1440. doi: 10.1002/wnan.1440 For further resources related to this article, please visit the WIREs website.

Quantitative analysis of the deposited nanoparticle dose on cell cultures by optical absorption spectroscopy

AIM

The delivered nanoparticle dose to cells in vitro may depend on nanoparticle sedimentation rate. Here, the conditions under which optical absorption spectroscopy can be used to quantify the deposited nanoparticle dose in vitro are investigated.

MATERIALS & METHODS

Nanoparticle cytotoxicity in both upright and inverted cell culture orientations is studied in the presence and absence of serum.

RESULTS

Dissolvable nanoparticles, such as ZnO, exhibit no difference in upright and inverted cultures due to dissolved Zn(2+) ions that dominate cytotoxicity. Insoluble nanoparticles, however, exhibit different sedimentation rates and deposited doses that are linked to the observed cytotoxicity.

CONCLUSION

The combined use of upright-inverted cell orientations and optical absorption spectroscopy can provide a simple experimental approach to interpret in vitro nano-biointeractions.

Quantification of the cellular dose and characterization of nanoparticle transport during in vitro testing

BACKGROUND

The constant increase of the use of nanomaterials in consumer products is making increasingly urgent that standardized and reliable in vitro test methods for toxicity screening be made available to the scientific community. For this purpose, the determination of the cellular dose, i.e. the amount of nanomaterials effectively in contact with the cells is fundamental for a trustworthy determination of nanomaterial dose responses. This has often been overlooked in the literature making it difficult to undertake a comparison of datasets from different studies. Characterization of the mechanisms involved in nanomaterial transport and the determination of the cellular dose is essential for the development of predictive numerical models and reliable in vitro screening methods.

RESULTS

This work aims to relate key physico-chemical properties of gold nanoparticles (NPs) to the kinetics of their deposition on the cellular monolayer. Firstly, an extensive characterization of NPs in complete culture cell medium was performed to determine the diameter and the apparent mass density of the formed NP-serum protein complexes. Subsequently, the kinetics of deposition were studied by UV-vis absorbance measurements in the presence or absence of cells. The fraction of NPs deposited on the cellular layer was found to be highly dependent on NP size and apparent density because these two parameters influence the NP transport. The NP deposition occurred in two phases: phase 1, which consists of cellular uptake driven by the NP-cell affinity, and phase 2 consisting mainly of NP deposition onto the cellular membrane.

CONCLUSION

The fraction of deposited NPs is very different from the initial concentration applied in the in vitro assay, and is highly dependent of the size and density of the NPs, on the associated transport rate and on the exposure duration. This study shows that an accurate characterization is needed and suitable experimental conditions such as initial concentration of NPs and liquid height in the wells has to be considered since they strongly influence the cellular dose and the nature of interactions of NPs with the cells.

Immobilized Particle Imaging for Quantification of Nano- and Microparticles

The quantification of nano- and microparticles is critical for diverse applications relying on the exact knowledge of the particle concentration. Although many techniques are available for counting particles, there are some limitations in regards to counting with low-scattering materials and facile counting in harsh organic solvents. Herein, we introduce an easy and rapid particle counting technique, termed "immobilized particle imaging" (IPI), to quantify fluorescent particles with different compositions (i.e., inorganic or organic), structures (i.e., solid, porous, or hollow), and sizes (50-1000 nm) dispersed in either aqueous or organic solutions. IPI is achieved by immobilizing particles of interest in a cell matrix-like scaffold (e.g., agarose) and imaging using standard microscopy techniques. Imaging a defined volume of the immobilized particles allows for the particle concentration to be calculated from the count numbers in a fixed volume. IPI provides a general and facile approach to quantify advanced nano- and microparticles, which may be helpful to researchers to obtain new insights for different applications (e.g., nanomedicine).