Strong, self-standing oxygen barrier films from nanocelluloses modified with regioselective oxidative treatments

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

Transparent, thermal stable, water resistant and high gas barrier films from cellulose nanocrystals prepared by reactive deep eutectic solvents

Nanocellulose-based film, as a novel new type of film mainly made of nanosized cellulose, has demonstrated an ideal combination of renewability and enhanced or novel properties. Considerable efforts have been made to enhance its intrinsic properties or create new functions to expand its applications, such as in food packaging, water treatment or flexible electronics. In this paper, two different types of deep eutectic solvents (guanidine sulfamate-glycerol and guanidine sulfamate-choline chloride) were formulated and applied to prepare cellulose nanocrystals with dialdehyde cellulose (DAC). The effects of reaction conditions including time, temperature and cellulose-DES ratio on the grafting degree and yield were studied. After ultrasonication, two types of CNCs, with an average diameter of 3-5 nm and an average length of 140.7-204.2 nm, were obtained. The synthesized CNCs displayed an enhanced thermal stability compared to pristine cellulose. Moreover, highly transparent (light transmittance higher than 90 %) and water stable nanocellulose based films (a wet tensile strength of higher than 30 MPa after immersing in water for 24 h) were fabricated. Besides, the obtained films exhibited low oxygen transmission rate, showing a good potential application in food packaging.

Sulfonic acid functionalized cellulose-derived (nano)materials: Synthesis and application

The preparation/application of heterogeneous (nano)materials from natural resources has currently become increasingly fascinating for researchers. Cellulose is the most abundant renewable polysaccharide on earth. The unique physicochemical, structural, biological, and environmental properties of this natural biopolymer have led to its increased application in many fields. The more desirable features of cellulose-based (nano)materials such as biodegradability, renewability, biocompatibility, cost-effectiveness, simplicity of preparation, environmentally friendly nature, and widespread range of applications have converted them into promising compounds in medicine, catalysis, biofuel cells, and water/wastewater treatment processes. Functionalized cellulose-based (nano)materials containing sulfonic acid groups may prove to be one of the most promising sustainable bio(nano)materials of modern times in the field of cellulose science and (nano)technology owing to their intrinsic features, high crystallinity, high specific surface area, abundance, reactivity, and recyclability. In this review, the developments in the application of sulfonated cellulose-based (nano)materials containing sulfonic acid (-SO3H) groups in catalysis, water purification, biological/biomedical, environmental, and fuel cell applications have been reported. This review provides an overview of the methods used to chemically modify cellulose and/or cellulose derivatives in different forms, including nanocrystals, hydrogels, films/membranes, and (nano)composites/blends by introducing sulfonate groups on the cellulose backbone, focusing on diverse sulfonating agents utilized and substitution regioselectivity, and highlights their potential applications in different industries for the generation of alternative energies and products.

Green Preparation and Functional Properties of Reinforced All-Cellulose Membranes Made from Corn Straw

In this study, all-cellulose nanocomposite (ACNC) was successfully prepared through a green and sustainable approach by using corn stalk as raw material, water as regeneration solvent, and recyclable two-component ionic liquid/DMSO as the solvent to dissolve cellulose. The morphology and structural properties of ACNC were determined by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis, indicating homogeneity and good crystallinity. In addition, a comprehensive characterization of ACNC showed that CNF not only improved the thermal stability and mechanical characteristics of ACNC, but also significantly improved the oxygen barrier performance. The ACNC prepared in this work has a good appearance, smooth surface, and good optical transparency, which provides a potential application prospect for converting cellulose wastes such as corn straws into biodegradable packaging materials and electronic device encapsulation materials.

New fluorescent Schiff base modified nanocellulose-based chemosensors for the selective detection of Fe3+, Zn2+ and Cu2+ in semi-aqueous media and application in seawater sample

Stimulus-responsive fluorescent-modified biopolymers have received significant attention in the field of chemosensors. Herein, four new fluorescent dyes, namely, S1: (PDA-DANC), S2: (SAL-PDA-DANC), S3: (BrSAL-PDA-DANC) and S4: (ClSAL-PDA-DANC) have been successfully synthesized from 2,3-dialdehyde nanocellulose (DANC) for the detection of heavy metals. The microstructural and photophysical properties of nanocellulose (NC), microcrystalline cellulose (DANC) and the synthesized S1 to S4 dyes were investigated by FT-IR, SEM-EDX, XRD, TGA, DLS and photoluminescence. NC, obtained from conversion of MCC, shows an average size of 802.4 nm with 0.141 of polydispersity index (PdI), and a crystalline index (CI) of 82.40 % and crystallite size of 4.68 nm. The synthesized dyes present good fluorescent properties and have been therefore exploited for developing new probes for heavy metal ions detection. Remarkable "turn off" and/or "turn on" behaviors with Fe3+ and Cu2+ and with Zn2+ in DMF/water solution have been demonstrated, allowing the sensitive and selective determination of these heavy metal ions with a low limit of detection (LOD). Finally, the evaluation of the Fe3+ sensing in a real seawater sample was investigated.

Aqueous synthesis of highly functional, hydrophobic, and chemically recyclable cellulose nanomaterials through oxime ligation

Cellulose nanofibril (CNF) materials are candidates for the sustainable development of high mechanical performance nanomaterials. Due to inherent hydrophilicity and limited functionality range, most applications require chemical modification of CNF. However, targeted transformations directly on CNF are cumbersome due to the propensity of CNF to aggregate in non-aqueous solvents at high concentrations, complicating the choice of suitable reagents and requiring tedious separations of the final product. This work addresses this challenge by developing a general, entirely water-based, and experimentally simple methodology for functionalizing CNF, providing aliphatic, allylic, propargylic, azobenzylic, and substituted benzylic functional groups. The first step is NaIO₄ oxidation to dialdehyde-CNF in the wet cake state, followed by oxime ligation with O-substituted hydroxylamines. The increased hydrolytic stability of oximes removes the need for reductive stabilization as often required for the analogous imines where aldehyde groups react with amines in water. Overall, the process provides a tailored degree of nanofibril functionalization (2-4.5 mmol/g) with the possible reversible detachment of the functionality under mildly acidic conditions, resulting in the reformation of dialdehyde CNF. The modified CNF materials were assessed for potential applications in green electronics and triboelectric nanogenerators.

A comprehensive investigation on modified cellulose nanocrystals and their films properties

In this work, we aimed to tune cellulose nanocrystals (CNCs) properties by introducing different functional groups (aldehyde, carboxyl, silane, and ammonium groups) on the surface through different chemical modifications. These functional groups were obtained by combining: the periodate oxidation with TEMPO-oxidation, aminosylation or cationization. CNCs produced and their films were characterized to elucidate their performances. The results showed that the properties of obtained CNCs varied depending on the grafted functionalities on the surface. The results reveal that after each modification a colloidal stability is preserved. Interestingly, Periodate oxidation of cellulose nanocrystals results in film components that interact through intra- and intermolecular hemiacetals and lead to films with a tensile strength of 116 MPa compared to the pristine CNCs, in contrast the subsequent modifications led to lower tensile strength. Of note, remarkable thermal stability has been achieved after modifications reaching a maximum of 280 °C. The oxygen barrier properties of the films after modifications varied between 0.48 and 0.54 cm³μm/(m²d*kPa) at 50 % RH.

Role of nanocellulose in industrial and pharmaceutical sectors - A review

Lignocellulosic biomass from agricultural residues serves as the critical component to replace synthetic polymeric materials in the coming future. Agricultural residues can be used to obtain cellulose by delignification followed by bleaching. Further, cellulose is converted into nanocellulose by various methods. Nanocellulose is used in multiple pharmaceutical applications as a polymer in hydrogels, transdermal drug delivery systems, aerogels, wound healing dressing materials, as superdisintegrants in fast dissolving tablets, emulgel, microparticles, gels, foams, thickening agents, stabilizers, cosmetics, medical implants, tissue engineering, liposomes, food and composites, etc. This review provides detailed knowledge about the nature of nanocellulose regarding its high surface area, high polymerization, loading, and binding capacity of hydrophilic and hydrophobic active pharmaceutical ingredients and significance of various applications of nanocellulose. Biocompatible and non-toxic, it makes it an ideal material for applications in the biomedical field. A significant advantage is a biocompatibility, which is non-toxic for many biomedical applications.

Mechanochemical Transformations of Biomass into Functional Materials

Biomass is one of the promising alternatives to petroleum-derived materials and plays a major role in our fight against climate change by providing renewable sources of chemicals and materials. Owing to its chemical and structural complexity, the transformation of biomass into value-added products requires a profound understanding of its composition at different scales and innovative methods such as combining physical and chemical processes. In this context, the use of mechanochemistry in biomass valorization is currently growing owing to its potentials as an efficient, sustainable, and environmentally friendly approach. This review highlights the latest advances in the transformation of biomass (i. e., chitin, cellulose, hemicellulose, lignin, and starch) to functional materials using mechanochemical-assisted methods. We focused here on the methodology of biomass processing, influencing factors, and resulting properties with an emphasis on achieving functional materials rather than breaking down the biopolymer chains into smaller molecules. Opportunities and limitations associated this methodology were discussed accordingly for future directions.

Sustainable Chitosan-Dialdehyde Cellulose Nanocrystal Film

In this study, we incorporated 2,3-dialdehyde nanocrystalline cellulose (DANC) into chitosan as a reinforcing agent and manufactured biodegradable films with enhanced gas barrier properties. DANC generated via periodate oxidation of cellulose nanocrystal (CNC) was blended at various concentrations with chitosan, and bionanocomposite films were prepared via casting and characterized systematically. The results showed that DANC developed Schiff based bond with chitosan that improved its properties significantly. The addition of DANC dramatically improved the gas barrier performance of the composite film, with water vapor permeability (WVP) value decreasing from 62.94 g·mm·m-2·atm-1·day-1 to 27.97 g·mm·m-2·atm-1·day-1 and oxygen permeability (OP) value decreasing from 0.14 cm3·mm·m-2·day-1·atm-1 to 0.026 cm3·mm·m-2·day-1·atm-1. Meanwhile, the maximum decomposition temperature (Tdmax) of the film increased from 286 °C to 354 °C, and the tensile strength of the film was increased from 23.60 MPa to 41.12 MPa when incorporating 25 wt.% of DANC. In addition, the chitosan/DANC (75/25, wt/wt) films exhibited superior thermal stability, gas barrier, and mechanical strength compared to the chitosan/CNC (75/25, wt/wt) film. These results confirm that the DANC and chitosan induced films with improved gas barrier, mechanical, and thermal properties for possible use in film packaging.

A Fast Dissolution Pretreatment to Produce Strong Regenerated Cellulose Nanofibers via Mechanical Disintegration

This study investigates a fast dissolution and regeneration pretreatment to produce regenerated cellulose nanofibers (RCNFs) via mechanical disintegration. Two cellulose pulps, namely, birch and dissolving pulps, with degree of polymerizations of 1800 and 3600, respectively, were rapidly dissolved in dimethyl sulfoxide (DMSO) by using tetraethylammonium hydroxide (TEAOH) as aqueous electrolyte at room temperature. When TEAOH (35 wt % in water) was added to the pulp-DMSO dispersion (pulp:DMSO and TEAOH:DMSO weight ratios of 1:90 and 1:9, respectively), 95% of the dissolving pulp and 85% of the birch pulp fibers dissolved almost immediately. Addition of water caused the regeneration of cellulose without any chemical modification and only a minor decrease of DP, whereas the crystallinity structure of cellulose transformed from cellulose I to cellulose II. The regenerated cellulose could then be mechanically disintegrated into nanosized fibers with only a few passes through a microfluidizer, and RCNF showed fibrous structure. The specific tensile strength of the film produced from both RCNFs exceeded 100 kN·m/kg, and overall mechanical properties of RCNF produced from birch pulp were in line with reference CNF produced by using extensive mechanical disintegration. Although the thermal stability of RCNFs was slightly lower compared to their corresponding original cellulose pulp, the onset temperature of degradation of RCNFs was over 270 °C.

Recent Progress on Cellulose-Based Ionic Compounds for Biomaterials

Glycans play important roles in all major kingdoms of organisms, such as archea, bacteria, fungi, plants, and animals. Cellulose, the most abundant polysaccharide on the Earth, plays a predominant role for mechanical stability in plants, and finds a plethora of applications by humans. Beyond traditional use, biomedical application of cellulose becomes feasible with advances of soluble cellulose derivatives with diverse functional moieties along the backbone and modified nanocellulose with versatile functional groups on the surface due to the native features of cellulose as both cellulose chains and supramolecular ordered domains as extractable nanocellulose. With the focus on ionic cellulose-based compounds involving both these groups primarily for biomedical applications, a brief introduction about glycoscience and especially native biologically active glycosaminoglycans with specific biomedical application areas on humans is given, which inspires further development of bioactive compounds from glycans. Then, both polymeric cellulose derivatives and nanocellulose-based compounds synthesized as versatile biomaterials for a large variety of biomedical applications, such as for wound dressings, controlled release, encapsulation of cells and enzymes, and tissue engineering, are separately described, regarding the diverse routes of synthesis and the established and suggested applications for these highly interesting materials.

Aqueous Modification of Chitosan with Itaconic Acid to Produce Strong Oxygen Barrier Film

In this study, the chemical modification of chitosan using itaconic acid as a natural-based unsaturated dicarboxylic acid was investigated. In an aqueous environment, the amine group of chitosan reacts with itaconic acid to produce a chitosan derivative with pyrrolidone-4-carboxylic acid group. On the basis of the elemental analysis, 15% of the amine groups of chitosan reacted, thus creating modified chitosan with amine and carboxylic acid functionalities. Due to the presence of amine and carboxylic acid groups, the surface charge properties of the chitosan were notably altered after itaconic acid modification. In an aqueous solution, the modified chitosan exhibited zwitterionic properties, being cationic at low pH and turning anionic when the pH was increased over 6.5, whereas the original chitosan remained cationic until pH 9. Furthermore, it was demostrated that the modified chitosan was suitable for the preparation of a self-standing film with similarly high transparency but notably higher mechanical strength and oxygen barrier properties compared to a film made from the original chitosan. In addition, the thermal stability of the modified chitosan film was higher than that of the original chitosan film, and the modified chitosan exhibited flame-retardant properties.

Hierarchical Assembly of Nanocellulose into Filaments by Flow-Assisted Alignment and Interfacial Complexation: Conquering the Conflicts between Strength and Toughness

Filaments comprising solely cellulose nanofibrils (CNFs) have been fabricated by flow-assisted assembling, where the strength can be improved greatly with the sacrifice of toughness. Inspired by the architecture of natural nacre and plant cell wall, the combined technique of convergent microfluidic spinning and in situ interfacial complexation between CNF and chitosan molecules was used to construct the filaments with hierarchical assembly of highly oriented CNFs locked by chitosan complexes, showing simultaneous enhancements of strength and toughness. In specific, the best performing filament exhibited a toughness of 88.9 kJ/m³ and a tensile strength of 1289 MPa because of the strong interfacial complexation interactions between CNFs and chitosan molecules. The tensile strength was further raised to 1627 MPa when the filaments were cross-linked synergistically by using Ca²⁺, surpassing the reported values in the literature. Molecular dynamics simulations revealed the possible fracture mechanism of the filaments under tension. With excellent mechanical performance and biocompatibility, the resulting CNF/chitosan filament system showed a promising application potential as nonabsorbable surgical sutures. The demonstrated spinning technology also offered a new avenue for the fabrication of high-performance filaments.

Potential of di-aldehyde cellulose for sustained release of oxytetracycline: A pharmacokinetic study

This study focused on the in-vivo sustained release of oxytetracycline (OTC) loaded on di-aldehyde cellulose (DAC). The periodate oxidation method was used for the synthesis of DAC. The prepared DAC-OTC material was characterized by different techniques such as Scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Transmission electron microscopy (TEM) and particle size analyzer. The pharmacokinetic studies were performed on DAC-OTC composite system and commercial tablet (COTA). The results of pharmacokinetic studies demonstrated that DAC-OTC exhibited higher area under the curve (AUC) (482.8 μghmL^-1) as compared to COTA (90.72 μghmL^-1). DAC-OTC composite system has double compartment pattern with improvement in mean residing time (MRT) and area under moment curve (AUMC_0-∞) than the commercial tablet (2.8 and 15.13 folds higher, respectively). Swelling index of DAC-OTC at different pH and pKa of OTC release imply that controlled in-vivo release in DAC-OTC composite system could be due to the simultaneous occurrence of the covalent and hydrogen bond between OTC and di-aldehyde cellulose. These results indicate that di-aldehyde cellulose may improve the in-vivo bioavailability of OTC.

Highly Transparent Nanocomposites Based on Poly(vinyl alcohol) and Sulfated UV-Absorbing Wood Nanofibers

Unbleached lignocellulose fibers were studied for the fabrication of wood-based UV-absorbing nanofibers and were used to produce transparent nanocomposites. Groundwood pulp (GWP) and sawdust were selected as raw materials thanks to their low processing degree of fibers and abundant availability as a low-value industrial side stream. Both materials were first sulfated using a reactive deep eutectic solvent. The sulfated wood and sawdust nanofibers (SWNFs and SSDNFs, respectively) were fabricated using a mild mechanical disintegration approach. As a reference material, sulfated cellulose nanofibers (SCNFs) were obtained from bleached cellulose pulp. Our results showed that both GWP and sawdust exhibited similar reactivity compared with bleached cellulose pulp, whereas the yields of sulfated lignin-containing pulps were notably higher. The diameters of both SWNFs and SSDNFs were approximately 3 nm, which was similar to those of the SCNFs. When 10 wt % of lignin-containing nanofibers were mixed together with poly(vinyl alcohol), the fabrication of nanocomposites with only a minimal decrease in transparency in the visible light spectrum was achieved. Transmission in the UV region, on the other hand, was significantly reduced by SWNFs and SSDNFs, whereas SCNFs had only a minor UV-absorbing property. Although the reinforcing effect of lignin-containing nanofibers was lower compared with that of SCNFs, it was comparable with those of other UV-absorbing additives reported in the literature. Overall, the wood-based UV-absorbing nanofibers could have a valuable use in optical applications such as lenses and optoelectronics.

Versatile Application of Nanocellulose: From Industry to Skin Tissue Engineering and Wound Healing

Nanocellulose is cellulose in the form of nanostructures, i.e., features not exceeding 100 nm at least in one dimension. These nanostructures include nanofibrils, found in bacterial cellulose; nanofibers, present particularly in electrospun matrices; and nanowhiskers, nanocrystals, nanorods, and nanoballs. These structures can be further assembled into bigger two-dimensional (2D) and three-dimensional (3D) nano-, micro-, and macro-structures, such as nanoplatelets, membranes, films, microparticles, and porous macroscopic matrices. There are four main sources of nanocellulose: bacteria (Gluconacetobacter), plants (trees, shrubs, herbs), algae (Cladophora), and animals (Tunicata). Nanocellulose has emerged for a wide range of industrial, technology, and biomedical applications, namely for adsorption, ultrafiltration, packaging, conservation of historical artifacts, thermal insulation and fire retardation, energy extraction and storage, acoustics, sensorics, controlled drug delivery, and particularly for tissue engineering. Nanocellulose is promising for use in scaffolds for engineering of blood vessels, neural tissue, bone, cartilage, liver, adipose tissue, urethra and dura mater, for repairing connective tissue and congenital heart defects, and for constructing contact lenses and protective barriers. This review is focused on applications of nanocellulose in skin tissue engineering and wound healing as a scaffold for cell growth, for delivering cells into wounds, and as a material for advanced wound dressings coupled with drug delivery, transparency and sensorics. Potential cytotoxicity and immunogenicity of nanocellulose are also discussed.

Recent Strategies in Preparation of Cellulose Nanocrystals and Cellulose Nanofibrils Derived from Raw Cellulose Materials

The recent strategies in preparation of cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) were described. CNCs and CNFs are two types of nanocelluloses (NCs), and they possess various superior properties, such as large specific surface area, high tensile strength and stiffness, low density, and low thermal expansion coefficient. Due to various applications in biomedical engineering, food, sensor, packaging, and so on, there are many studies conducted on CNCs and CNFs. In this review, various methods of preparation of CNCs and CNFs are summarized, including mechanical, chemical, and biological methods. The methods of pretreatment of cellulose are described in view of the benefits to fibrillation.

Post-sulfonation of cellulose nanofibrils with a one-step reaction to improve dispersibility

Cellulose nanofibrils (CNF) were sulfonated and the dispersion quality was compared to unfunctionalized and 2,2,6,6-tetramethylpiperdine-1-oxyl radical (TEMPO) post-oxidation treatment of existing CNF (mechanically fibrillated pulp). A post-sulfonation treatment on existing CNF in chlorosulfonic acid and dimethylformamide (DMF) resulted in sulfonated CNF that retained a fibril-like morphology. There was a small decrease in the cellulose crystallinity index for the sulfonated CNF, but this was much lower than the reported regioselective oxidative bisulfite pretreatment method used to make sulfonated CNF. The current approach was extremely quick, and 5min of reaction time was sufficient to result in significant improvements in dispersibility compared to unfunctionalized CNF. The sulfonated CNF and TEMPO oxidized CNF had better dispersibility compared to the unfunctionalized CNF when dispersed in DMF and water, and in many cases the sulfonated CNF had better dispersibility than the TEMPO CNF. It was found that when CNF was dispersed in DMF the TEMPO CNF formed carboxyl dimethylammonium groups, while the sulfonated CNF formed formate groups.

Cellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments

Deep eutectic solvents (DESs) are a fairly new class of green solvents applied in various fields. This study investigates urea-based DES systems as novel pretreatments for cellulose nanofibril production. In the experiments, deep eutectic systems having urea and ammonium thiocyanate or guanidine hydrochloride as a second component were formed at 100 °C and then applied to disintegrate wood-derived cellulose fibers. The DES-pretreated fibers were nanofibrillated into three different levels of mechanical treatments with a microfluidizer, and their properties were analyzed. Moreover, nanofibril films were fabricated by solvent casting method. Both DES systems were able to loosen and swell the cellulose fiber structure as indicated by the increase in the lateral dimension of the fibers. Nonpretreated birch cellulose fibers had difficulties in mechanical nanofibrillation as clogging of the chamber occurred often. However, cellulose nanofibrils with widths ranging from 13.0 to 19.3 nm were successfully fabricated from DES-pretreated fibers with both systems. Translucent nanofibril films generated from DES-pretreated cellulose nanofibrils had good thermal stability and mechanical properties, with tensile strengths of approximately 135-189 MPa and elastic modulus of 6.4-7.7 GPa. Consequently, both urea-based DESs showed a high potential as environmentally friendly solvents in the manufacture of cellulose nanofibrils.

Superhydrophobic and Slippery Lubricant-Infused Flexible Transparent Nanocellulose Films by Photoinduced Thiol-Ene Functionalization

Films comprising nanofibrillated cellulose (NFC) are suitable substrates for flexible devices in analytical, sensor, diagnostic, and display technologies. However, some major challenges in such developments include their high moisture sensitivity and the complexity of current methods available for functionalization and patterning. In this work, we present a facile process for tailoring the surface wettability and functionality of NFC films by a fast and versatile approach. First, the NFC films were coated with a layer of reactive nanoporous silicone nanofilament by polycondensation of trichlorovinylsilane (TCVS). The TCVS afforded reactive vinyl groups, thereby enabling simple UV-induced functionalization of NFC films with various thiol-containing molecules via the photo "click" thiol-ene reaction. Modification with perfluoroalkyl thiols resulted in robust superhydrophobic surfaces, which could then be further transformed into transparent slippery lubricant-infused NFC films that displayed repellency against both aqueous and organic liquids with surface tensions as low as 18 mN·m^-1. Finally, transparent and flexible NFC films incorporated hydrophilic micropatterns by modification with OH, NH₂, or COOH surface groups, enabling space-resolved superhydrophobic-hydrophilic domains. Flexibility, transparency, patternability, and perfect superhydrophobicity of the produced nanocellulose substrates warrants their application in biosensing, display protection, and biomedical and diagnostics devices.

Transparent bionanocomposite films based on chitosan and TEMPO-oxidized cellulose nanofibers with enhanced mechanical and barrier properties

The development of biobased active films for use in food packaging is increasing due to low cost, environmental appeal, renewability and availability. The objective of this research was to develop an effective and complete green approach for the production of bionanocomposite films with enhanced mechanical and barrier properties. This was accomplished by incorporating TEMPO-oxidized cellulose nanofibers (2,2,6,6-tetramethylpiperidine-1-oxyl radical) into a chitosan matrix. An aqueous suspension of chitosan (100-75wt%), sorbitol (25wt%) and TEMPO-oxidized cellulose nanofibers (TEMPO-CNFs, 0-25wt%) were cast in an oven at 40°C for 2-4days. Films were preconditioned at 25°C and 50% RH for characterization. The surface morphology of the films was revealed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The thermal properties and crystal structure of the films were evaluated by thermogravimetric analysis (TGA-DTG) and X-ray diffraction (XRD). Incorporation of TEMPO-CNFs enhanced the mechanical strength of the films due to the high aspect ratio (3-20nm width, and 10-100nm length) of TEMPO-CNFs and strong interactions with the chitosan matrix. Oxygen and water vapor transmission rates for films that are prepared with chitosan and TEMPO-CNFs (15-25wt%) were significantly reduced. Furthermore, these bionanocomposite films had good thermal stability. Use of TEMPO-CNFs in this method makes it possible to produce bionanocomposite films that are flexible, transparent, and thus have potential in food packaging applications.

Aldehyde-functionalized porous nanocellulose for effective removal of heavy metal ions from aqueous solutions

Nanoscale sorption is a promising strategy for catalyst and purification system design.

Efficient functionalization of alginate biomaterials

Peptide coupled alginates obtained by chemical functionalization of alginates are commonly used as scaffold materials for cells in regenerative medicine and tissue engineering. We here present an alternative to the commonly used carbodiimide chemistry, using partial periodate oxidation followed by reductive amination. High and precise degrees of substitution were obtained with high reproducibility, and without formation of by-products. A protocol was established using l-Tyrosine methyl ester as a model compound and the non-toxic pic-BH3 as the reducing agent. DOSY was used to indirectly verify covalent binding and the structure of the product was further elucidated using NMR spectroscopy. The coupling efficiency was to some extent dependent on alginate composition, being most efficient on mannuronan. Three different bioactive peptide sequences (GRGDYP, GRGDSP and KHIFSDDSSE) were coupled to 8% periodate oxidized alginate resulting in degrees of substitution between 3.9 and 6.9%. Cell adhesion studies of mouse myoblasts (C2C12) and human dental stem cells (RP89) to gels containing various amounts of GRGDSP coupled alginate demonstrated the bioactivity of the material where RP89 cells needed higher peptide concentrations to adhere.

Composite Films of Poly(vinyl alcohol) and Bifunctional Cross-linking Cellulose Nanocrystals

Long and flexible cellulose nanofibrils or stiff and short cellulose nanocrystals (CNCs) are both promising lightweight materials with high strength and the potential to serve as reinforcing agents in many polymeric materials. In this study, bifunctional reactive cellulose nanocrystals (RCNCs) with carboxyl and aldehyde functionalities were used as reinforcements to prepare acetal-bonding cross-linked poly(vinyl alcohol) (PVA) films. Two RCNCs were obtained through the mechanical homogenization of partially carboxylated dialdehyde cellulose (DAC) with a residual aldehyde content of 0.55 and 1.93 mmol/g and a carboxyl content of 1.65 and 1.93 mmol/g, respectively. The mechanical, thermal, and barrier properties of PVA-RCNC films with a variable mass ratio of RCNCs (0.5-10%) were determined. Reference CNCs without reactive aldehydes were obtained through the reduction of aldehyde functionalities to primary hydroxide groups, and their reinforcing effect was compared to RCNCs. With the addition of 10% acetal-bonding RCNCs with respect to PVA weight, the tensile strength and Young's modulus were up to 2-fold greater than those of pure PVA film. An addition of only 0.5% RCNCs improved the tensile strength of the PVA film by 66% and the modulus by 61%. In comparison, a significantly lower reinforcing effect (19% with CNC loading of 0.5%) was found using reference CNCs. PVA's effective oxygen barrier and thermal properties were preserved when RCNCs were introduced into the films.

Butylamino-functionalized cellulose nanocrystal films: barrier properties and mechanical strength

Self-standing films were fabricated from butylamino-functionalized cellulose nanocrystals and tested for their mechanical strength and barrier performance.