Antifreeze (glyco)protein mimetic behavior of poly(vinyl alcohol): detailed structure ice recrystallization inhibition activity study

A Close Cognition of Charged Poly(l-methionine) Derivatives for Antifreeze

Ice formation poses a significant challenge across various fields, from industrial processes to biological preservation. Developing antifreeze agents and recognizing the antifreeze mechanism have gained considerable attention. Herein, a series of poly(l-methionine) derivatives, poly(S-carboxymethyl-l-methionine sulfonium) (PMetA), poly(S-methyl-l-methionine sulfonium chloride) (PMetM), and poly(S-carbamidomethyl-l-methionine sulfonium chloride) (PMetAM), with carboxyl, methyl, and acetamide groups, respectively, are synthesized and investigated for antifreeze. The relationship between the polymer structure and the ice recrystallization inhibition (IRI) activity is examined, suggesting that zwitterionic PMetA shows the highest IRI activity, about 27.0 ± 3.9% at 10 mg mL-1 relative to that of water. Results of low-field nuclear magnetic resonance and differential scanning calorimetry indicate that the IRI activity is associated with the activation energy for hydrogen bond breakage. PMetA exhibits acceptable cytocompatibility at 10.0 mg mL-1 and a good cryoprotective efficiency. This finding provides a valuable insight into the antifreeze mechanism, contributing to the development of potent cryoprotectants.

Gold Nanoparticles Decorated with HPLC6-Derived Peptides as a Platform for Ice Recrystallization Inhibition

In nature, organisms living in extreme environmental conditions produce antifreeze proteins (AFPs) that prevent the growth of ice crystals and depress the freezing point of body fluids. In this study, three different peptides derived from the N-terminal sequence of the helical type I AFP HPLC6, along with a stapled derivative produced via on-resin microwave-assisted copper(I)-catalyzed azide-alkyne cycloaddition, were conjugated to gold nanoparticles. The aim of decorating the surface of the nanoparticles with multiple copies of the peptides was to combine the ice-binding capability of the peptides with the size of a nanoparticle, thus, mimicking the protein bulkiness to enhance the peptide antifreeze activity. Ice recrystallization inhibition experiments on the functionalized gold nanoparticles showed a decrease in the ice crystal growth rates with the stapled conjugate being the most active. Conformational studies indicated a major helical content in the constrained peptide, highlighting the importance of a stable conformation for antifreeze activity. Finally, cytotoxicity tests showed that both the peptides and the nanoparticle constructs were nontoxic. The proposed approach could thus represent the starting point for developing effective strategies for cryopreservation.

Development of Macromolecular Cryoprotectants for Cryopreservation of Cells

Cryopreservation is a common way for long-term storage of therapeutical proteins, erythrocytes, and mammalian cells. For cryoprotection of these biosamples to keep their structural integrity and biological activities, it is essential to incorporate highly efficient cryoprotectants. Currently, permeable small molecular cryoprotectants such as glycerol and dimethyl sulfoxide dominate in cryostorage applications, but they are harmful to cells and human health. As acting in the extracellular space, membrane-impermeable macromolecular cryoprotectants, which exert remarkable membrane stabilization against cryo-injury and are easily removed post-thaw, are promising candidates with biocompatibility and feasibility. Water-soluble hydroxyl-containing polymers such as poly(vinyl alcohol) and polyol-based polymers are potent ice recrystallization inhibitors, while polyampholytes, polyzwitterions, and bio-inspired (glyco)polypeptides can significantly increase post-thaw recovery with reduced membrane damages. In this review, the synthetic macromolecular cryoprotectants are systematically summarized based on their synthesis routes, practical utilities, and cryoprotective mechanisms. It provides a valuable insight in development of highly efficient macromolecular cryoprotectants with valid ice recrystallization inhibition activity for highly efficient and safe cryopreservation of cells.

The Valence-Dependent Activity of Colloidal Molecules as Ice Recrystallization Inhibitors

Inspired by advances in cryopreservation techniques, which are essential for modern biomedical applications, there is a special interest in the ice recrystallization inhibition (IRI) of the antifreeze protein (AFPs) mimics. There are in-depth studies on synthetic materials mimicking AFPs, from simple molecular structure levels to complex self-assemblies. Herein, we report the valence-dependent IRI activity of colloidal organic molecules (CMs). The CMs were prepared through polymerization-induced particle-assembly (PIPA) of the ABC-type triblock terpolymer of poly(acryloxyethyl trimethylammonium chloride)-b-poly(benzyl acrylate)-b-poly(diacetone acrylamide) (PATAC-b-PBzA-b-PDAAM) at high monomer conversions. Stabilized by the cationic block of PATAC, the strong intermolecular H-bonding and incompatibility of the PDAAM block with PBzA contributed to the in situ formation of Janus particles (AX1) beyond the initial spherical seed particles (AX0), as well as the high valency clusters of linear AX2 and trigonal AX3. Their distribution was controlled mainly by the polymerization degrees (DPs) of PATAC and PDAAM blocks. IRI activity results of the CMs suggest that the higher fraction of AX1 results in the better IRI activity. Increasing the fraction of AX1 from 27% to 65% led to a decrease of the mean grain size from 39.8% to 10.9% and a depressed growth rate of ice crystals by 58%. Moreover, by replacing the PDAAM block with the temperature-responsive one of poly(N-isopropylacrylamide) (PNIPAM), temperature-adjustable IRI activity was observed, which is well related to the reversible transition of AX0 to AX1, providing a new idea for the molecular design of amphiphilic polymer nanoparticle-based IRI activity materials.

Optimization of Zwitterionic Polymers for Cell Cryopreservation

Cryopreservation techniques are valuable for the preservation of genetic properties in cells, and the development of this technology contributes to various fields. In a previous study, an isotonic freezing medium composed of poly(zwitterion) (polyZI) has been reported, which alleviates osmotic shock, unlike typical hypertonic freezing media. In this study, the primitive freezing medium composed of emerging polyZI is optimized. Imidazolium/carboxylate-type polyZI (VimC3C) is the optimal chemical structure. The molecular weight and degree of ion substitution (DSion) are not significant factors. There is an impediment with the primitive polyZI freezing media. While the polyZI forms a matrix around the cell membrane to protect cells, the matrix is difficult to remove after thawing, resulting in low cell proliferation. Unexpectedly, increasing the poly(VimC3C) concentration from 10% to 20% (w/v) improves cell proliferation. The optimized freezing medium, 20% (w/v) poly(VimC3C)_DSion(100%)/1% (w/v) NaCl aqueous solution, exhibited a better cryoprotective effect.

Polyvinyl alcohol addition to freezing extender can improve the post-thaw quality, longevity and in vitro fertility of ram epididymal spermatozoa

Recovering and cryopreserving epididymal spermatozoa are suitable methods for preserving the genetic potential of livestock and endangered species. Regarding encouraging reports on the use of polyvinyl alcohol (PVA) in cryopreserving various cell types, we conducted this study to examine the impact of PVA on the post-thaw quality, longevity, and in vitro fertility of ram epididymal sperm. In the first experiment, ram epididymal spermatozoa were frozen in extenders containing 6 % glycerol and 0, 0.5, 1, 2, 5, 10, or 15 mg/ml of PVA. Polyvinyl alcohol at concentrations of 0.5, 1, and 2 mg/ml improved the motility and functional membrane integrity (FMI) of the sperm compared with the control group (P < 0.05). In the second experiment, we investigated whether PVA could partially substitute glycerol in the freezing extender. PVA was added at 0, 0.5, 1, and 2 mg/ml to the extenders containing 1 % or 2 % glycerol. After thawing, the sperm motility parameters of the group containing 1 mg/ml PVA and 2 % glycerol were significantly higher than those of the un-supplemented groups (P < 0.05). In the third experiment, the effect of PVA on the post-thaw sperm longevity were examined. Sperm were frozen in 3 extenders: one containing 6 % glycerol and 1 mg/ml PVA (Gly6P1), another containing 2 % glycerol and 1 mg/ml PVA (Gly2P1), and a control extender with 6 % glycerol. After thawing, the quality of the sperm was evaluated. Sperm were then diluted in human tubal fluid (HTF) and incubated at 37 °C for 3 h. Afterwards, the quality of the sperm was evaluated once more. The presence of PVA in the freezing extender improved motility parameters and FMI. Additionally, PVA-containing groups had lower proportions of capacitated and acrosome reacted sperm compared with the control group (P < 0.05). The Gly6P1 group performed better than the other two groups (P < 0.05). In the fourth experiment, sperm from the Gly6P1 and Control groups were used in the IVF process immediately after thawing (T0) and after a 3-h incubation at 37 °C in HTF (T3). Cleavage, blastocyst and hatching rates in both groups were similar at T0, but they were lower in the Control group at T3 (P < 0.05). In conclusion, PVA as an additive to the freezing extender significantly improves post-thaw motility, viability, acrosome integrity, longevity, and fertile lifespan of ram epididymal spermatozoa.

Ice Recrystallization Unveils the Binding Mechanism Operating at a Diffused Interface

Recrystallization of ice is a natural phenomenon that causes adverse effects in cryopreservation, agriculture, and in frozen food industry. It has long been recognized that ice recrystallization occurs through the Ostwald ripening and accretion processes. However, neither of these processes has been explored in microscopic detail by state-of-the-art experimental techniques. We carried out atomistic molecular dynamics (MD) simulations to explore ice recrystallization through the accretion process. Attempts have been made to elucidate the binding mechanism that is operating at the diffused ice-water interface. It is demonstrated that two ice crystals spontaneously recognize each other and bind together to form a large crystal in liquid water, resulting in ice recrystallization by accretion. Interestingly, the study reveals that the binding occurs due to the freezing of the interfacial water layer present between the two ice planes, even at a temperature above the melting point of the ice crystal. The synergistically enhanced ordering effect of two ice surfaces on the interfacial water leads to such freezing occurring during the binding process. However, proper crystallographic alignment is not necessarily required for the binding of the two crystals. Simulations have also been carried out to study the binding between an ice crystal and the model ice-binding surface (IBS) of an antifreeze protein above the melting point of the ice crystal. It is found that such binding at the IBS is accompanied by freezing of the interfacial water. This establishes that the synergetic ordering-driven freezing of interfacial water is a common binding mechanism at the diffused surfaces of ice crystals. We believe that this mechanism will provide a microscopic understanding of the process of recrystallization inhibition and thus help in designing suitable materials for potent applications in recrystallization inhibition.

Advances in single ice crystal shaping materials: From nature to synthesis and applications in cryopreservation

Antifreeze (glyco) proteins [AF(G)Ps], which are widely present in various extreme microorganisms, can control the formation and growth of ice crystals. Given the significance of cryogenic technology in biomedicine, climate science, electronic energy, and other fields of research, scientists are quite interested in the development and synthesis high-efficiency bionic antifreeze protein materials, particularly to reproduce their dynamic ice shaping (DIS) characteristics. Single ice crystal shaping materials, a promising class of ice-controlling materials, can alter the morphology and growth rate of ice crystals at low temperatures. This review aims to highlight the development of single ice crystal shaping materials and provide a brief comparison between a series of natural and bionic synthetic materials with DIS ability, which include AF(G)Ps, polymers, salts, and nanomaterials. Additionally, we summarize their applications in cryopreservation. Finally, this paper presents the current challenges and prospects encountered in developing high-efficiency and practical single ice crystal shaping materials. STATEMENT OF SIGNIFICANCE: The formation and growth of ice crystals hold a significant importance to an incredibly broad range of fields. Therefore, the design and fabrication of the single ice crystal shaping materials have gained the increasing popularity due to its key role in dynamic ice shaping (DIS) characteristics. Especially, single ice crystal shaping materials are considered one of the most promising candidates as ice inhibitors, presenting tremendous prospects for enhancing cryopreservation. In this work, we focus on the molecular characteristics, structure-function relationships, and DIS mechanisms of typical natural and biomimetic synthetic materials. This review may provide inspiration for the design and preparation of single ice crystal shaping materials and give guidance for the development of effective cryopreservation agent.

Divergent Mechanisms of Ice Growth Inhibition by Antifreeze Proteins

Antifreeze proteins (AFPs) are biomolecules that can bind to ice and hinder its growth, thus holding significant potential for biotechnological and biomedical applications. AFPs are a subset of ice-binding proteins (IBPs) and are found in various organisms across different life kingdoms. This mini-review investigates the underlying mechanisms by which AFPs impede ice growth, emphasizing the disparities between hyperactive and moderate AFPs. Hyperactive AFPs exhibit heightened thermal hysteresis (TH) activity and can bind to both the basal and prism planes of ice crystals, enabling them to endure extremely cold temperatures. In contrast, moderate AFPs predominantly bind to the prism/pyramidal planes and demonstrate lower TH activity. The structural diversity of AFPs and the presence of ordered water molecules on their ice-binding sites (IBS) have been subjects of debate among researchers. Multiple hypotheses have been proposed concerning the significance of ordered water molecules in ice binding. Gaining insights into the binding dynamics and the factors influencing TH activity in AFPs is crucial for the development of efficient synthetic compounds and the establishment of comprehensive models to elucidate ice growth inhibition. Here we emphasize the necessity for further research to unravel the mechanisms of AFPs and presents a pathway for constructing models capable of comprehensively explaining their inhibitory effects on ice growth.

Poly(l-alanine-co-l-threonine succinate) as a Biomimetic Cryoprotectant

We synthesized a series of [(l-Ala)x-co-(l-Thr succinate)y] (PATs), which are analogous to natural antifreezing glycoprotein with the structure of [l-Ala-l-Ala-l-Thr disaccharide]n, by varying the composition and degree of succinylation while fixing their molecular weight (Mn) and Ala/Thr ratio at approximately 10-12 kDa and 2:1, respectively. We investigated their ice recrystallization inhibition (IRI), ice nucleation inhibition (INI), dynamic ice shaping (DIS), thermal hysteresis (TH), and protein cryopreservation activities. Both IRI and INI activities were greater for PATs with higher l-Ala content (PATs-3 and PATs-4) than those with lower l-Ala content (PATs-1 and PATs-2). DIS activity with faceted crystal growth was clearly observed in PATs-2 and PATs-4 with a high degree of succinylation. TH was small with <0.1 °C for all PATs and slightly greater for PATs with a high l-Ala content. Except for PATs-1, the protein (lactate dehydrogenase, LDH) stabilization activity was excellent for all PATs studied, maintaining LDH activity as high as that of fresh LDH even after 15 freeze-thaw cycles. To conclude, the cryo-active biomimetic PATs were synthesized by controlling the l-Ala content and degree of succinylation. Our results showed that PATs with an l-Ala content of 65-70% and degree of succinylation of 12-19% exhibited the cryo-activities of IRI, INI, and DIS, and particularly promising properties for the cryoprotection of LDH protein.

Calixarene-based cryoprotectants for ice recrystallization inhibition and cell cryopreservation

The development of new cryoprotectants for cryopreservation of cells has attracted considerable interest. Herein, five calixarene-based CPAs (SC4A, S-S-C4A, S-SO2-C4A, SBAC4A, and CAC4A) were developed, and their IRI activity, DIS property and cryoprotective effect were studied. SBAC4A with a sulphobetaine zwitterion and SC4A with sulfo group modification possessed better cryoprotective effects than the other calixarene-based CPAs, especially for SBAC4A with the enhanced cell viabilities of 16.16 ± 1.78%, 12.60 ± 1.15% and 14.90 ± 1.66% against MCF-7, hucMSCs and A549 cells, respectively. This result provides a supramolecular principle for developing novel CPAs with consideration of the factors of hydrogen bonding, the macromolecular crowding principle and the three-dimensional (3D) structure.

Effect of cryoprotectant-induced intracellular ice formation and crystallinity on bactria during cryopreservation

Cryopreservation is widely used for the long-term storage of bacteria. Glycerol is one of the traditional cryoprotectants used widely to prevent cryoinjury during the cryopreservation of bacteria,although it may be toxic to the cells. To overcome these issues, synthetic antifreeze polymers are also used as cryoprotectants to inhibit ice formation. In the study, we compared the performance of various antifreeze synthetic polymers including poly(vinyl alcohol) (PVA), poly(vinylpyrrolidone), poly(ethylene glycol), and dextran with glycerol, among which PVA performed best on decreasing the ice growth rate.The impacts of glycerol, trehalose, combined with PVA on the survival of S. thermophilus were also explored. Notably,. S. thermophilus stored in 100 mg/mL trehalose and 1 mg/mL PVA +50 mg/mL trehalose combo showed significantly enhanced survival when compared with those in traditional cryoprotectant (20% [v/v] glycerol), which achieved the survival percentage of only 41.03 ± 0.09%. The effects of the freezing temperature and crystallinity on the survival of S. thermophilus were elucidated.

Does freezing induce self-assembly of polymers? A molecular dynamics study

This work investigates the freezing-induced self-assembly (FISA) of polyvinyl alcohol (PVA) and PVA-like polymers using molecular dynamics simulations. In particular, the effect of the degree of supercooling, degree of polymerization, polymer type, and initial local concentration on the FISA was studied. It was found that the preeminent factor responsible for FISA is not the diffusion of the polymers away from the nucleating ice front, but the increase in the polymer's local concentration upon freezing of the solvent (water). At a higher degree of supercooling, the polymers are engulfed by the growing ice front, impeding their diffusion into the supercooled solution and finally inhibiting their self-assembly. Conversely, at a relatively lower degree of supercooling, the rate of diffusion of the polymers into the supercooled solution is higher, which increases their local concentration and results in FISA. FISA was also observed to depend on the polymer-solvent interactions. Strongly favorable solute-solvent interactions hinder the self-assembly, whereas unfavorable solute-solvent interactions promote the self-assembly. The polymer and aggregate morphology were investigated using the radius of gyration, end-to-end distance, and asphericity analysis. This study brings molecular insights into the quintessential factors governing self-assembly via freezing of the solvent, which is a novel self-assembly technique especially suitable for biomedical applications.

Engineered Compounds to Control Ice Nucleation and Recrystallization

One of the greatest concerns in the subzero storage of cells, tissues, and organs is the ability to control the nucleation or recrystallization of ice. In nature, evidence of these processes, which aid in sustaining internal temperatures below the physiologic freezing point for extended periods of time, is apparent in freeze-avoidant and freeze-tolerant organisms. After decades of studying these proteins, we now have easily accessible compounds and materials capable of recapitulating the mechanisms seen in nature for biopreser-vation applications. The output from this burgeoning area of research can interact synergistically with other novel developments in the field of cryobiology, making it an opportune time for a review on this topic.

Ice nucleation in aqueous solutions of short- and long-chain poly(vinyl alcohol) studied with a droplet microfluidics setup

Poly(vinyl alcohol) (PVA) has ice binding and ice nucleating properties. Here, we explore the dependence of the molecular size of PVA on its ice nucleation activity. For this purpose, we studied ice nucleation in aqueous solutions of PVA samples with molar masses ranging from 370 to 145 000 g mol-1, with a particular focus on oligomer samples with low molar mass. The experiments employed a novel microfluidic setup that is a follow-up on the previous WeIzmann Supercooled Droplets Observation on a Microarray (WISDOM) design by Reicher et al. The modified setup introduced and characterized here, termed nanoliter Bielefeld Ice Nucleation ARraY (nanoBINARY), uses droplet microfluidics with droplets (96 ± 4) µm in diameter and a fluorinated continuous oil phase and surfactant. A comparison of homogeneous and heterogeneous ice nucleation data obtained with nanoBINARY to those obtained with WISDOM shows very good agreement, underpinning its ability to study low-temperature ice nucleators as well as homogeneous ice nucleation due to the low background of impurities. The experiments on aqueous PVA solutions revealed that the ice nucleation activity of shorter PVA chains strongly decreases with a decrease in molar mass. While the cumulative number of ice nucleating sites per mass nm of polymers with different molar masses is the same, it becomes smaller for oligomers and completely vanishes for dimer and monomer representatives such as 1,3-butanediol, propan-2-ol, and ethanol, most likely because these molecules become too small to effectively stabilize the critical ice embryo. Overall, our results are consistent with PVA polymers and oligomers acting as heterogeneous ice nucleators.

Synthesis of Poly(allyl glycidyl ether)-Derived Polyampholytes and Their Application to the Cryopreservation of Living Cells

Through the postpolymerization modification of poly(allyl glycidyl ether) (PAGE), a functionalizable polyether with a poly(ethylene oxide) backbone, we engineered a new class of highly tunable polyampholyte materials. These polyampholytes can be synthesized to have several useful properties, including low cytotoxicity and pH-responsive coacervate formation. In this study, we used PAGE-based polyampholytes (PAGE-PAs) for the cryopreservation of mammalian cell suspensions. Typically, dimethyl sulfoxide (DMSO) is the cryoprotectant used for preserving mammalian cells, but DMSO suffers from key drawbacks including toxicity and difficult post-thaw removal that motivates the development of new materials and methods. Toxicity and post-thaw survival were dependent on PAGE-PA composition with the highest immediate post-thaw survival for normal human dermal fibroblasts occurring for the least toxic PAGE-PA at a cation/anion ratio of 35:65. With low toxicity, the PAGE-PA concentration could be increased in order to increase immediate post-thaw survival of the immortalized mouse embryonic fibroblasts (NIH/3T3). While immediate post-thaw viability was achieved using only the PAGE-PAs, long-term cell survival was low, highlighting the challenges involved with the design of cryoprotective polyampholytes. An environment utilizing both PAGE-PAs and DMSO in a cryoprotective solution offered promising post-thaw viabilities exceeding 70%, with long-term metabolic activities comparable to unfrozen cells.

Inhibiting ice recrystallization by amyloid protein fibrils

Ice recrystallization is harmful to the quality of frozen foods and the cryopreservation of cells and biological tissues, requiring biocompatible materials with ice recrystallization inhibition (IRI) activity. Emerging studies have associated IRI activity with amphiphilic structures. We propose amphiphilic amyloid protein fibrils (APFs) may be IRI-active. APFs were prepared from whey protein isolate (WPI) in water (W-APFs) and in trifluoroethanol (TFE-APFs). W-APFs and TFE-APFs were more IRI-active than WPI over a concentration range of 2.5-10.0 mg/mL. Both APFs showed stronger IRI activity at pH 3.0 than at pH 5.0, 7.0, and 10.0, which was ascribed to the effect of water dispersibility and fibril length. The reduced IRI activity of the two APFs with increasing NaCl content was caused by fibril aggregation. Ice binding by APFs was absent or very weak. Ordered water was observed for the two APFs, which might be essential for IRI activity. Our findings may lead to the use of APFs as novel ice recrystallization inhibitors.

Ice recrystallization inhibition mechanism of zwitterionic poly(carboxybetaine methacrylate)

Understanding the ice recrystallization inhibition (IRI) mechanism is of fundamental importance for the rational design of novel antifreeze protein mimetics and reducing IR-related damage. In this communication, using quantitive experimental methods and molecular dynamics simulations we demonstrate that zwitterionic poly(carboxybetaine methacrylate) (PCBMA) can serve as a novel IRI-active substance. This work unravels the atomic-level details of the IRI mechanism of zwitterionic antifreeze protein mimetics and provides insight into the development of next-generation antifreeze protein mimetics.

Control strategies of ice nucleation, growth, and recrystallization for cryopreservation

The cryopreservation of biomaterials is fundamental to modern biotechnology and biomedicine, but the biggest challenge is the formation of ice, resulting in fatal cryoinjury to biomaterials. To date, abundant ice control strategies have been utilized to inhibit ice formation and thus improve cryopreservation efficiency. This review focuses on the mechanisms of existing control strategies regulating ice formation and the corresponding applications to biomaterial cryopreservation, which are of guiding significance for the development of ice control strategies. Herein, basics related to biomaterial cryopreservation are introduced first. Then, the theoretical bases of ice nucleation, growth, and recrystallization are presented, from which the key factors affecting each process are analyzed, respectively. Ice nucleation is mainly affected by melting temperature, interfacial tension, shape factor, and kinetic prefactor, and ice growth is mainly affected by solution viscosity and cooling/warming rate, while ice recrystallization is inhibited by adsorption or diffusion mechanisms. Furthermore, the corresponding research methods and specific control strategies for each process are summarized. The review ends with an outlook of the current challenges and future perspectives in cryopreservation. STATEMENT OF SIGNIFICANCE: Ice formation is the major limitation of cryopreservation, which causes fatal cryoinjury to cryopreserved biomaterials. This review focuses on the three processes related to ice formation, called nucleation, growth, and recrystallization. The theoretical models, key influencing factors, research methods and corresponding ice control strategies of each process are summarized and discussed, respectively. The systematic introduction on mechanisms and control strategies of ice formation is instructive for the cryopreservation development.

Synthesis of Poly(2-(methylsulfinyl)ethyl methacrylate) via Oxidation of Poly(2-(methylthio)ethyl methacrylate): Evaluation of the Sulfoxide Side Chain on Cryopreservation

Conventional cryopreservation solutions rely on the addition of organic solvents such as DMSO or glycerol, but these do not give full recovery for all cell types, and innovative cryoprotectants may address damage pathways which these solvents do not protect against. Macromolecular cryoprotectants are emerging, but there is a need to understand their structure-property relationships and mechanisms of action. Here we synthesized and investigated the cryoprotective behavior of sulfoxide (i.e., "DMSO-like") side-chain polymers, which have been reported to be cryoprotective using poly(ethylene glycol)-based polymers. We also wanted to determine if the polarized sulfoxide bond (S⁺O^- character) introduces cryoprotective effects, as this has been seen for mixed-charge cryoprotective polyampholytes, whose mechanism of action is not yet understood. Poly(2-(methylsulfinyl)ethyl methacrylate) was synthesized by RAFT polymerization of 2-(methylthio)ethyl methacrylate and subsequent oxidation to sulfoxide. A corresponding N-oxide polymer was also prepared and characterized: (poly(2-(dimethylamineoxide)ethyl methacrylate). Ice recrystallization inhibition assays and differential scanning calorimetry analysis show that the sulfoxide side chains do not modulate the frozen components during cryopreservation. In cytotoxicity assays, it was found that long-term (24 h) exposure of the polymers was not tolerated by cells, but shorter (30 min) incubation times, which are relevant for cryopreservation, were tolerated. It was also observed that overoxidation to the sulfone significantly increased the cytotoxicity, and hence, these materials require a precision oxidation step to be deployed. In suspension cell cryopreservation investigations, the polysulfoxides did not increase cell recovery 24 h post-thaw. These results show that unlike hydrophilic backboned polysulfides, which can aid cryopreservation, the installation of the sulfoxide group onto a polymer does not necessarily bring cryoprotective properties, highlighting the challenges of developing and discovering macromolecular cryoprotectants.

Poly(vinyl alcohol) Molecular Bottlebrushes Nucleate Ice

Ice binding proteins (IBP) have evolved to limit the growth of ice but also to promote ice formation by ice-nucleating proteins (INPs). IBPs, which modulate these seemingly distinct processes, often have high sequence similarities, and molecular size/assembly is hypothesized to be a crucial determinant. There are only a few synthetic materials that reproduce INP function, and rational design of ice nucleators has not been achieved due to outstanding questions about the mechanisms of ice binding. Poly(vinyl alcohol) (PVA) is a water-soluble synthetic polymer well known to effectively block ice recrystallization, by binding to ice. Here, we report the synthesis of a polymeric ice nucleator, which mimics the dense assembly of IBPs, using confined ice-binding polymers in a high-molar-mass molecular bottlebrush. Poly(vinyl alcohol)-based molecular bottlebrushes with different side-chain densities were synthesized via a combination of ring-opening metathesis polymerization (ROMP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, using "grafting-to" and "grafting-through" approaches. The facile preparation of the PVA bottlebrushes was performed via selective hydrolysis of the acetate of the poly(vinyl acetate) (PVAc) side chains of the PVAc bottlebrush precursors. Ice-binding polymer side-chain density was shown to be crucial for nucleation activity, with less dense brushes resulting in colder nucleation than denser brushes. This bio-inspired approach provides a synthetic framework for probing heterogeneous ice nucleation and a route toward defined synthetic nucleators for biotechnological applications.

Janus regulation of ice growth by hyperbranched polyglycerols generating dynamic hydrogen bonding

In this study, a new phenomenon describing the Janus effect on ice growth by hyperbranched polyglycerols, which can align the surrounding water molecules, has been identified. Even with an identical polyglycerol, we not only induced to inhibit ice growth and recrystallization, but also to promote the growth rate of ice that is more than twice that of pure water. By investigating the polymer architecture and population, we found that the stark difference in the generation of quasi-structured H2O molecules at the ice/water interface played a crucial role in the outcome of these opposite effects. Inhibition activity was induced when polymers at nearly fixed loci formed steady hydrogen bonding with the ice surface. However, the formation-and-dissociation dynamics of the interfacial hydrogen bonds, originating from and maintained by migrating polymers, resulted in an enhanced quasi-liquid layer that facilitated ice growth. Such ice growth activity is a unique property unseen in natural antifreeze proteins or their mimetic materials.

Bioinspired Threonine-Based Polymers with Potent Ice Recrystallization Inhibition Activity

Ice growth mitigation is a pervasive challenge for multiple industries. In nature, ice-binding proteins (IBPs) demonstrate potent ice growth prevention through ice recrystallization inhibition (IRI). However, IBPs are expensive, difficult to produce in large quantities, and exhibit minimal resilience to nonphysiological environmental stressors, such as pH. For these reasons, researchers have turned to bioinspired polymeric materials that mimic IBP behavior. To date, however, no synthetic polymer has rivaled the ability of native IBPs to display IRI activity at ultralow nanomolar concentrations. In this work, we study the IRI activity of peptides and polypeptides inspired by common ice-binding residues of IBPs to inform the synthesis and characterization of a potent bioinspired polymer that mimics IBP behavior. We show first that the threonine polypeptide (pThr) displays the best IRI activity in phosphate-buffered saline (PBS). Second, we use pThr as a molecular model to synthesize and test a bioinspired polymer, poly(2-hydroxypropyl methacrylamide) (pHPMA). We show that pHPMA exhibits potent IRI activity in neutral PBS at ultralow concentrations (0.01 mg/mL). pHPMA demonstrates potent IRI activity at low molecular weights (2.3 kDa), with improved activity at higher molecular weights (32.8 kDa). These results substantiate that pHPMA is a robust molecule that mitigates ice crystal growth at concentrations similar to native IBPs.

Macrocycle molecule-based cryoprotectants for ice recrystallization inhibition and cell cryopreservation

Cyclodextrin-based cryoprotectants were developed. α-TMCD, which can be easily put into large-scale production, showed enhanced cell viabilities of 19.97 ± 0.78%, 13.93 ± 4.46% and 19.10 ± 0.95% against GES-1, hucMSCs and A549 cells. Moreover, the viable cells observed by light microscope imaging showed that the enhanced hucMSC cell number percentage of α-TMCD was 103.2%. An α-TMCD-DMSO-based CPA exhibited an enhanced cryoprotective effect by a mechanism of DMSO-enhanced cell penetrating effect and α-TMCD-DMSO synergistically enhanced IMA ability. α-TMCD exhibited potential for the discovery of macrocycle-molecule-based cryoprotectants.

Synthesis of poly(vinyl alcohol) by blue light bismuth oxide photocatalysed RAFT. Evaluation of the impact of freeze/thaw cycling on ice recrystallisation inhibition

Poly(vinyl alcohol), PVA, is the most potent polymeric ice recrystallisation inhibitor (IRI), mimicking a complex function of ice binding proteins. The IRI activity of PVA scales with its molecular weight and hence broad molecular weight distributions in free radical-derived PVAs lead to activity measurements dominated by small amounts of heavier fractions. Well-defined PVA can be prepared by thermally initiated RAFT/MADIX polymerization using xanthates by the polymerization of the less activated monomer vinyl acetate. The low conversions and molecular weights obtained during this approach, often requires feeding of additional initiator and bulk polymerization. Here we employ bismuth oxide photo-RAFT in solution, using blue light (450 nm), rather than previously reported white light, to obtain a library of PVA's. The use of blue light enabled quantitative conversion and acceptable dispersities. Purple light (380 nm) was also used, but asymmetric molecular weight distributions were obtained in some cases. High concentrations of high molecular weight PVA is known to form cryogels during freeze/thaw which has led to speculation this might limit the use of PVA in environments where the temperature cycles e.g. the construction industry. After 4 freeze/thaw cycles there was only small changes in observable IRI for all synthesised PVAs and two commercial standards. In an extended test, activity was retained after 100 freeze/thaw cycles, mitigating concerns that PVA could not be used in situations where freeze/thaw cycles occur. This work presents a convenient method to obtain well-defined PVAs for cryoscience studies compared to conventional thermal-RAFT and indicates that cryogelation concerns may not prevent their use.

Chemical approaches to cryopreservation

Cryopreservation of cells and biologics underpins all biomedical research from routine sample storage to emerging cell-based therapies, as well as ensuring cell banks provide authenticated, stable and consistent cell products. This field began with the discovery and wide adoption of glycerol and dimethyl sulfoxide as cryoprotectants over 60 years ago, but these tools do not work for all cells and are not ideal for all workflows. In this Review, we highlight and critically review the approaches to discover, and apply, new chemical tools for cryopreservation. We summarize the key (and complex) damage pathways during cellular cryopreservation and how each can be addressed. Bio-inspired approaches, such as those based on extremophiles, are also discussed. We describe both small-molecule-based and macromolecular-based strategies, including ice binders, ice nucleators, ice nucleation inhibitors and emerging materials whose exact mechanism has yet to be understood. Finally, looking towards the future of the field, the application of bottom-up molecular modelling, library-based discovery approaches and materials science tools, which are set to transform cryopreservation strategies, are also included.

Minimalistic ice recrystallisation inhibitors based on phenylalanine

Ice recrystallisation inhibition (IRI) is typically associated with ice binding proteins, but polymers and other mimetics are emerging. Here we identify phenylalanine as a minimalistic, yet potent, small-molecule IRI capable of inhibiting ice growth at just 1 mg mL-1. Facial amphiphilicity is shown to be a crucial structural feature, with para-substituents enhancing (hydrophobic) or decreasing (hydrophilic) IRI activity. Both amino and acid groups were found to be essential. Solution-phase self-assembly of Phenylalanine was not observed, but the role of self-assembly at the ice/water interface could not be ruled out as a contributing factor.

Preparation of Poly(vinyl Alcohol) Microparticles for Freeze Protection of Sensitive Fruit Crops

Poly(vinyl alcohol) (PVA) displays ice recrystallization inhibition (IRI) properties as many antifreeze proteins found in cold tolerant organisms. The molecular architecture and composition (molecular weight and distribution of pendant OH and acetate groups) have been studied to improve the antifreezing properties of PVA, suggesting that the molecular architecture of PVA plays an important role in IRI activity. The present work deals with the preparation of PVA microparticles using an alkaline treatment. The effect of PVA molecular weight on the morphology and antifreezeing properties of PVA microparticles was investigated. The antifreezeing property of PVA microparticles on the susceptibility of flower bud tissues to freeze damage was also evaluated. The alkaline treatment of an aqueous PVA solution produced stable polymer chain aggregates with spherical shapes. The average size of the PVA microparticles increased significantly with the increasing molecular weight of the PVA macromolecule precursor. The PVA microparticles inhibited the growth of ice crystals and blocked ice growth at concentrations as low as 0.01 % w/v. The effect of impeding ice crystal growth by preventing the joining of adjacent ice crystals is attributed to the larger size of the PVA particles adsorbed on the ice surface compared to the aggregated PVA macromolecules in saline solution. The thermal hysteresis activity of PVA macromolecules and microparticles was not detected by differential scanning calorimetry analysis. The PVA microparticles reduced the incidence of freeze injuries in flower bud tissues by 55% and their application, considering the low toxicity of PVA, has a high potential for freeze protection in fruit crops.

Modulating the Pore Architecture of Ice-Templated Dextran Microparticles Using Molecular Weight and Concentration

Spray freeze drying (SFD) is an ice templating method used to produce highly porous particles with complex pore architectures governed by ice nucleation and growth. SFD particles have been advanced as drug carrier systems, but the quantitative description of the morphology formation in the SFD process is still challenging. Here, the pore space dimensions of SFD particles prepared from aqueous dextran solutions of varying molecular weights (40-200 kDa) and concentrations (5-20%) are analyzed using scanning electron microscopy. Coexisting morphologies composed of cellular and dendritic motifs are obtained, which are attributed to variations in the ice growth mechanism determined by the SFD system and modulation of these mechanisms by given precursor solution properties leading to changes in their pore dimensions. Particles with low-aspect ratio cellular pores showing variation of around 0.5-1 μm in diameter with precursor composition but roughly constant with particle diameter are ascribed to a rapid growth regime with high nucleation site density. Image analysis suggests that the pore volume decreases with dextran solid content. Dendritic pores (≈2-20 μm in diameter) with often a central cellular region are identified with surface nucleation and growth followed by a slower growth regime, leading to the overall dendrite surface area scaling approximately linearly with the particle diameter. The dendrite lamellar spacing depends on the concentration according to an inverse power law but is not significantly influenced by molecular weight. Particles with highly elongated cellular pores without lamellar formation show intermediate pore dimensions between the above two limiting morphological types. Analysis of variance and post hoc tests indicate that dextran concentration is the most significant factor in affecting the pore dimensions. The SFD dextran particles herein described could find use in pulmonary drug delivery due to their high porosity and biocompatibility of the matrix material.

End-Functionalized Poly(vinylpyrrolidone) for Ligand Display in Lateral Flow Device Test Lines

Lateral flow devices are rapid (and often low cost) point-of-care diagnostics—the classic example being the home pregnancy test. A test line (the stationary phase) is typically prepared by the physisorption of an antibody, which binds to analytes/antigens such as viruses, toxins, or hormones. However, there is no intrinsic requirement for the detection unit to be an antibody, and incorporating other ligand classes may bring new functionalities or detection capabilities. To enable other (nonprotein) ligands to be deployed in lateral flow devices, they must be physiosorbed to the stationary phase as a conjugate, which currently would be a high-molecular-weight carrier protein, which requires (challenging) chemoselective modifications and purification. Here, we demonstrate that poly(vinylpyrrolidone), PVP, is a candidate for a polymeric, protein-free test line, owing to its unique balance of water solubility (for printing) and adhesion to the nitrocellulose stationary phase. End-functionalized PVPs were prepared by RAFT polymerization, and the model capture ligands of biotin and galactosamine were installed on PVP and subsequently immobilized on nitrocellulose. This polymeric test line was validated in both flow-through and full lateral flow formats using streptavidin and soybean agglutinin and is the first demonstration of an “all-polymer” approach for installation of capture units. This work illustrates the potential of polymeric scaffolds as anchoring agents for small-molecule capture agents in the next generation of robust and modular lateral flow devices and that macromolecular engineering may provide real benefit.

Ice Recrystallization Inhibition by Amino Acids: The Curious Case of Alpha- and Beta-Alanine

Extremophiles produce macromolecules which inhibit ice recrystallization, but there is increasing interest in discovering and developing small molecules that can modulate ice growth. Realizing their potential requires an understanding of how these molecules function at the atomistic level. Here, we report the discovery that the amino acid l-α-alanine demonstrates ice recrystallization inhibition (IRI) activity, functioning at 100 mM (∼10 mg/mL). We combined experimental assays with molecular simulations to investigate this IRI agent, drawing comparison to β-alanine, an isomer of l-α-alanine which displays no IRI activity. We found that the difference in the IRI activity of these molecules does not originate from their ice binding affinity, but from their capacity to (not) become overgrown, dictated by the degree of structural (in)compatibility within the growing ice lattice. These findings shed new light on the microscopic mechanisms of small molecule cryoprotectants, particularly in terms of their molecular structure and overgrowth by ice.

Gold Nanoprobes Exploring the Ice Structure in the Aqueous Dispersion of Poly(Ethylene Glycol)-Gold Hybrid Nanoparticles

Ice structures and their formation process are fundamentally important to cryobiology, geoscience, and physical chemistry. In this work, we synthesized gold nanoprobes by grafting water-soluble polyethylene glycol (PEG) onto spherical gold nanoparticles and analyzed the structure of ice formation in the vicinity of the resulting hybrid PEG-Au nanoparticles (AuPEGNPs). Temperature-dependent in situ small-angle X-ray scattering (SAXS) indicated that AuPEGNPs, like PEG, caused the formation of bulk spherulite ice. Unlike for PEG, we observed the formation of lamellar ice with a periodicty of 4.6 nm, which is thermodynamically less stable than the bulk form. The lamellar ice formed after AuPEGNP agglomeration during cooling at -19 °C, and it remained during subsequent heating from -20 to -11 °C and melted at around -10 °C, far below the melting temperature of bulk ice. We explain different effects of AuPEGNP and free PEG on ice formation by the topological differences. The highly concentrated PEG chains on the agglomerated Au cores lead to the formation of PEG-hydrates that assemble into lamellar ice with a periodicity of 4.6 nm.

Diffusion Attachment Model for Long Helical Antifreeze Proteins to Ice

Some of the most potent antifreeze proteins (AFPs) are approximately rigid helical structures that bind with one side in contact with the ice surface at specific orientations. These AFPs take random orientations in solution; however, most orientations become sterically inaccessible as the AFP approaches the ice surface. The effect of these inaccessible orientations on the rate of adsorption of AFP to ice has never been explored. Here, we present a diffusion-controlled theory of adsorption kinetics that accounts for these orientational restrictions to predict a rate constant for adsorption (k_on, in m/s) as a function of the length and width of the AFP molecules. We find that k_on decreases with length and diameter of the AFP and is almost proportional to the inverse of the area of the binding surface. We demonstrate that the restricted orientations create an entropic barrier to AFP adsorption, which we compute to be approximately 7 k_BT for most AFPs and up to 9 k_BT for Maxi, the largest known AFP. We compare the entropic resistance 1/k_on to resistances for diffusion through boundary layers and across typical distances in the extracellular matrix and find that these entropic and diffusion resistances could become comparable in the small confined spaces of biological environments.

Poly(l-Ala-co-l-Lys) Exhibits Excellent Ice Recrystallization Inhibition Activity

The control of ice recrystallization is very important in cryo-technological fields such as the food industry, biopharmaceuticals, and cell storage. Ice recrystallization inhibition (IRI) compounds are therefore designed to limit the growth of ice crystals, decrease the crystal size, and control the crystal shape. To improve the IRI activity of cryo-systems, various synthetic polymers such as biomimetic polypeptides from polar fish, facially amphiphilic polymers, polyampholytes, poly(vinyl alcohol) derivatives, and block copolymers with hydrophilic-hydrophobic balance have been developed. Except for graphene oxide, poly(vinyl alcohol) has thus far exhibited the best performance among these polymers. Herein, poly(l-alanine-co-l-lysine) (PAK) was shown to exhibit a similar IRI activity to that of poly(vinyl alcohol). Moreover, in contrast to the needle-shaped ice crystals generated by the aqueous PVA solution, the PAK solution was shown to generate cubic-to-spherical shaped ice crystals. Furthermore, neither poly(l-alanine-co-l-aspartic acid) (PAD) nor poly(ethylene glycol) (PEG) with a similar molecular weight provided any significant IRI activity. Examination by FTIR and circular dichroism spectroscopies indicated that the PAK forms α-helices, whereas the PAD forms random coils in water. Further, a dynamic ice shaping study suggested that PAK strongly interacts with ice crystals, whereas PAD and PEG only weakly interact. These results suggest that PAK is an important compound with superior IRI activity and that this activity is dependent upon the functional groups and secondary structure of the polypeptides.

Design of an Ice Recrystallization-Inhibiting Polyampholyte-Containing Graft Polymer for Inhibition of Protein Aggregation

Freezing-induced damage to proteins, through osmotic stress and ice recrystallization, during protein processing and long-term storage is a serious concern and may lead to loss of protein activity owing to denaturation. In this study, graft copolymers composed of a cryoprotective polymer (capable of preventing osmotic stress) and poly(vinyl alcohol) (PVA; known for its high ice recrystallization inhibition (IRI) property) were developed. The polymers had high IRI activity, albeit slightly lower than that of PVA alone, but substantially higher than that of succinylated ε-poly-l-lysine (PLLSA) alone. The graft polymers showed an efficiency higher than that of PVA or PLLSA alone in protecting proteins from multiple freeze-thaw cycles, as well as during prolonged freezing, indicating a synergy between PVA and PLLSA. The PLLSA-based graft polymer is a promising material for use in protein biopharmaceutics for the long-term storage of proteins under freezing conditions.

Anti freeze proteins (Afp): Properties, sources and applications - A review

Extreme cold marine and freshwater temperatures (below 4 °C) induce massive deterioration to the cell membranes of organisms resulting in the formation of ice crystals, consequently causing organelle damage or cell death. One of the adaptive mechanisms organisms have evolved to thrive in cold environments is the production of antifreeze proteins with the functional capabilities to withstand frigid temperatures. Antifreeze proteins are extensively identified in different cold-tolerant species and they facilitate the persistence of cold-adapted organisms by decreasing the freezing point of their body fluids. Various structurally diverse types of antifreeze proteins detected possess the ability to modify ice crystal growth by thermal hysteresis and ice recrystallization inhibition. The unique properties of antifreeze proteins have made them a promising resource in industry, biomedicine, food storage and cryobiology. This review collates the findings of the various studies carried out in the past and the recent developments observed in the properties, functional mechanisms, classification, distinct sources and the ever-increasing applications of antifreeze proteins. This review also summarizes the possibilities of the way forward to identify new avenues of research on anti-freeze proteins.

Size and Shape Control of Ice Crystals by Amphiphilic Block Copolymers and Their Implication in the Cryoprotection of Mesenchymal Stem Cells

Precise control over the size and shape of ice crystals is a key factor to consider in designing antifreezing and cryoprotecting molecules for cryopreservation of cells. Here, we report that a poly(ethylene glycol)-poly(l-alanine) (PEG-PA) block copolymer exhibits excellent cryoprotecting properties for stem cells and antifreezing properties for water. As the molecular weight of PA increased from 500, 760, and 1750 Da (P1, P2, and P3) at the same PEG molecular weight of 5000 Da, the β-sheet content decreased and α-helix content increased. Comparing P2 (PEG-PA; 5000-760) and P4 (PEG-PA: 1000-750), β-sheets increased as the PEG block length decreased. The critical micelle concentration of the PEG-PA block copolymers was in a range of 0.5-3.0 mg/mL and was proportional to the hydrophobicity of the PEG-PA block copolymers. The P1, P2, and P3 self-assembled into spherical micelles, whereas P4 formed micelles with cylindrical morphology. The difference in the block copolymer structure affected ice recrystallization inhibition (IRI) activity and cryopreservation of cells. IRI activity was assayed via mean largest grain size (MLGS), and interactions between polymers and ice crystal surfaces were studied by dynamic ice-shaping studies. The MLGS decreased to 58 → 53 → 45 → 35 → 23% of that of PBS, as the polymer (PEG-PA 5000-500) concentration increased from 0.0 (PBS; control) → 1.0 → 5.0 → 10 → 30 → 50 mg/mL. The MLGS of PEG 5k solutions (negative control) decreased to 74 → 71 → 64 → 44 → 37% of that of PBS in the same concentration range. P3 and P4 with a longer hydrophobic PA block developed elongated ice crystals at above 30 mg/mL. The dynamic ice-shaping study exhibited that ice crystals became needle-shaped, as the hydrophobicity of the polymer increased as in P2-P4. The cell recovery in the P1 system after cryopreservation at -196 °C for 7 days was 87% of that of the dimethyl sulfoxide (DMSO) 10% system (positive control). The cell recovery was 48% for the P2 system and drastically decreased to less than 30% of that of the DMSO 10% system in the P3, P4, PEG 5k, PEG 1k, PVA 80H, and PVA 100H systems. Current studies suggest that IRI activity, round ice crystal shaping, and membrane stabilization activity of P1 cooperatively provide excellent cell recovery among the candidate systems. Recovered stem cells exhibited excellent proliferation and multilineage differentiation into osteocytes, chondrocytes, and adipocytes. To conclude, the PEG-PA (5000-500) block copolymer is suggested to be a promising antifreezing cryoprotectant for stem cells.

Bioinspired materials and technology for advanced cryopreservation

Cryopreservation can help to meet the demand for biosamples of high medical value. However, it remains difficult to effectively cryopreserve some sensitive cells, tissues, and reproductive organs. A coordinated effort from the perspective of the whole frozen biological system is necessary to advance cryopreservation technology. Animals that survive in cold temperatures, such as hibernators and cold-tolerant insects, offer excellent natural models. Their anti-cold strategies, such as programmed suppression of metabolism and the synthesis of cryoprotectants (CPAs), warrant systematic study. Furthermore, the discovery and synthesis of metabolism-regulating and cryoprotective biomaterials, combined with biotechnological breakthroughs, can also promote the development of cryopreservation. Further advances in the quality and duration of biosample storage inspired by nature will promote the application of cryopreserved biosamples in clinical therapy.

Polymer Self-Assembly Induced Enhancement of Ice Recrystallization Inhibition

Ice binding proteins modulate ice nucleation/growth and have huge (bio)technological potential. There are few synthetic materials that reproduce their function, and rational design is challenging due to the outstanding questions about the mechanisms of ice binding, including whether ice binding is essential to reproduce all their macroscopic properties. Here we report that nanoparticles obtained by polymerization-induced self-assembly (PISA) inhibit ice recrystallization (IRI) despite their constituent polymers having no apparent activity. Poly(ethylene glycol), poly(dimethylacrylamide), and poly(vinylpyrrolidone) coronas were all IRI-active when assembled into nanoparticles. Different core-forming blocks were also screened, revealing the core chemistry had no effect. These observations show ice binding domains are not essential for macroscopic IRI activity and suggest that the size, and crowding, of polymers may increase the IRI activity of "non-active" polymers. It was also discovered that poly(vinylpyrrolidone) particles had ice crystal shaping activity, indicating this polymer can engage ice crystal surfaces, even though on its own it does not show any appreciable ice recrystallization inhibition. Larger (vesicle) nanoparticles are shown to have higher ice recrystallization inhibition activity compared to smaller (sphere) particles, whereas ice nucleation activity was not found for any material. This shows that assembly into larger structures can increase IRI activity and that increasing the "size" of an IRI does not always lead to ice nucleation. This nanoparticle approach offers a platform toward ice-controlling soft materials and insight into how IRI activity scales with molecular size of additives.

Proline pre-conditioning of cell monolayers increases post-thaw recovery and viability by distinct mechanisms to other osmolytes

Cell cryopreservation is an essential tool for drug toxicity/function screening and transporting cell-based therapies, and is essential in most areas of biotechnology. There is a challenge, however, associated with the cryopreservation of cells in monolayer format (attached to tissue culture substrates) which gives far lower cell yields (<20% typically) compared to suspension freezing. Here we investigate the mechanisms by which the protective osmolyte l-proline enhances cell-monolayer cryopreservation. Pre-incubating A549 cells with proline, prior to cryopreservation in monolayers, increased post-thaw cell yields two-fold, and the recovered cells grow faster compared to cells cryopreserved using DMSO alone. Further increases in yield were achieved by adding polymeric ice recrystallization inhibitors, which gave limited benefit in the absence of proline. Mechanistic studies demonstrated a biochemical, rather than biophysical (i.e. not affecting ice growth) mode of action. It was observed that incubating cells with proline (before freezing) transiently reduced the growth rate of the cells, which was not seen with other osmolytes (betaine and alanine). Removal of proline led to rapid growth recovery, suggesting that proline pre-conditions the cells for cold stress, but with no impact on downstream cell function. Whole cell proteomics did not reveal a single pathway or protein target but rather cells appeared to be primed for a stress response in multiple directions, which together prepare the cells for freezing. These results support the use of proline alongside standard conditions to improve post-thaw recovery of cell monolayers, which is currently considered impractical. It also demonstrates that a chemical biology approach to discovering small molecule biochemical modulators of cryopreservation may be possible, to be used alongside traditional (solvent) based cryoprotectants.

Cell cryopreservation is an essential tool for transporting cell-based therapies, and is essential in most areas of biotechnology. Here proline pre-incubation prior to cell monolayer cryopreservation is explored, increasing post-thaw yields.

A minimalistic cyclic ice-binding peptide from phage display

Developing molecules that emulate the properties of naturally occurring ice-binding proteins (IBPs) is a daunting challenge. Rather than relying on the (limited) existing structure-property relationships that have been established for IBPs, here we report the use of phage display for the identification of short peptide mimics of IBPs. To this end, an ice-affinity selection protocol is developed, which enables the selection of a cyclic ice-binding peptide containing just 14 amino acids. Mutational analysis identifies three residues, Asp8, Thr10 and Thr14, which are found to be essential for ice binding. Molecular dynamics simulations reveal that the side chain of Thr10 hydrophobically binds to ice revealing a potential mechanism. To demonstrate the biotechnological potential of this peptide, it is expressed as a fusion ('Ice-Tag') with mCherry and used to purify proteins directly from cell lysate.

Physicochemical Approach to Understanding the Structure, Conformation, and Activity of Mannan Polysaccharides

Extracellular polysaccharides are widely produced by bacteria, yeasts, and algae. These polymers are involved in several biological functions, such as bacteria adhesion to surface and biofilm formation, ion sequestering, protection from desiccation, and cryoprotection. The chemical characterization of these polymers is the starting point for obtaining relationships between their structures and their various functions. While this fundamental correlation is well reported and studied for the proteins, for the polysaccharides, this relationship is less intuitive. In this paper, we elucidate the chemical structure and conformational studies of a mannan exopolysaccharide from the permafrost isolated bacterium Psychrobacter arcticus strain 273-4. The mannan from the cold-adapted bacterium was compared with its dephosphorylated derivative and the commercial product from Saccharomyces cerevisiae. Starting from the chemical structure, we explored a new approach to deepen the study of the structure/activity relationship. A pool of physicochemical techniques, ranging from small-angle neutron scattering (SANS) and dynamic and static light scattering (DLS and SLS, respectively) to circular dichroism (CD) and cryo-transmission electron microscopy (cryo-TEM), have been used. Finally, the ice recrystallization inhibition activity of the polysaccharides was explored. The experimental evidence suggests that the mannan exopolysaccharide from P. arcticus bacterium has an efficient interaction with the water molecules, and it is structurally characterized by rigid-rod regions assuming a 14-helix-type conformation.

Ice Inhibition for Cryopreservation: Materials, Strategies, and Challenges

Cryopreservation technology has developed into a fundamental and important supporting method for biomedical applications such as cell-based therapeutics, tissue engineering, assisted reproduction, and vaccine storage. The formation, growth, and recrystallization of ice crystals are the major limitations in cell/tissue/organ cryopreservation, and cause fatal cryoinjury to cryopreserved biological samples. Flourishing anti-icing materials and strategies can effectively regulate and suppress ice crystals, thus reducing ice damage and promoting cryopreservation efficiency. This review first describes the basic ice cryodamage mechanisms in the cryopreservation process. The recent development of chemical ice-inhibition molecules, including cryoprotectant, antifreeze protein, synthetic polymer, nanomaterial, and hydrogel, and their applications in cryopreservation are summarized. The advanced engineering strategies, including trehalose delivery, cell encapsulation, and bioinspired structure design for ice inhibition, are further discussed. Furthermore, external physical field technologies used for inhibiting ice crystals in both the cooling and thawing processes are systematically reviewed. Finally, the current challenges and future perspectives in the field of ice inhibition for high-efficiency cryopreservation are proposed.