Synthesis and Characterization of Degradable Polar Hydrophobic Ionic Polyurethane Scaffolds for Vascular Tissue Engineering Applications

Synthesis, characterization, and surface modification of degradable polar hydrophobic ionic polyurethane nanoparticles for the delivery of therapeutics to vascular tissue

Degradable polar hydrophobic ionic polyurethanes (D-PHI) are an emerging class of biomaterials with particular significance for blood-contacting applications due to their immunomodulatory effects and highly customizable block chemistry. In this manuscript, D-PHI polymer was formulated as a nanoparticle excipient for the first time by inverse emulsion polymerization. The nanoparticles were optimized with consideration of diameter, surface charge, size variability, and yield as a delivery vehicle for a custom vascular therapeutic peptide. A layer-by-layer (LBL) surface modification technique using poly-L-lysine was integrated within the nanoparticle design to optimize therapeutic loading efficiency. Solvent pH played a pivotal role in emulsion micelle formation, LBL polymer secondary structure, and the polymer functional group interactions critical for high therapeutic loading. The resulting nanoparticle platform met target size (200 ± 20 nm), polydispersity (<0.07), and storage stability standards, was nontoxic, and did not affect therapeutic peptide bioactivity in vitro. Surface-modified D-PHI nanoparticles can be reproducibly manufactured at low cost, generating a highly customizable excipient platform suitable for delivery of biomolecular therapeutics. These nanoparticles have potential applications in vascular drug delivery via localized infusion, drug eluting stents, and drug-coated angioplasty balloons. STATEMENT OF SIGNIFICANCE: Nanoscale excipients have become critical in the delivery of many therapeutics to enhance drug stability and targeted biodistribution through careful design of nanoparticle composition, surface chemistry, and size. This manuscript describes the development of a nanoparticle excipient derived from an immunomodulatory degradable polar hydrophobic ionic polyurethane, in combination with a layer-by-layer surface modification approach utilizing poly-L-lysine, to transport a mimetic peptide targeting smooth muscle cell migration in vascular disease. The nanoparticle platform draws on the effect of pH to maximize drug loading and tailor particle properties. The low cost and easily reproducible system presents a highly customizable platform that can be adapted for therapeutic delivery across a wide range of clinical indications.

Paracrine cross-talk between human adipose tissue-derived endothelial cells and perivascular cells accelerates the endothelialization of an electrospun ionomeric polyurethane scaffold

The ex vivo endothelialization of small diameter vascular prostheses can prolong their patency. Here, we demonstrate that heterotypic interactions between human adipose tissue-derived endothelial cells and perivascular cells can be exploited to accelerate the endothelialization of an electrospun ionomeric polyurethane scaffold. The scaffold was used to physically separate endothelial cells from perivascular cells to prevent their diffuse neo-intimal hyperplasia and spontaneous tubulogenesis, yet enable their paracrine cross-talk to accelerate the integration of the endothelial cells into a temporally stable endothelial lining of a continuous, elongated, and aligned morphology. Perivascular cells stimulated endothelial basement membrane protein production and suppressed their angiogenic and inflammatory activation to accelerate this biomimetic morphogenesis of the endothelium. These findings demonstrate the feasibility and underscore the value of exploiting heterotypic interactions between endothelial cells and perivascular cells for the fabrication of an endothelial lining intended for small diameter arterial reconstruction. STATEMENT OF SIGNIFICANCE: Adipose tissue is an abundant, accessible, and uniquely dispensable source of endothelial cells and perivascular cells for vascular tissue engineering. While their spontaneous self-assembly into microvascular networks is routinely exploited for the vascularization of engineered tissues, it threatens the temporal stability of an endothelial lining intended for small diameter arterial reconstruction. Here, we demonstrate that an electrospun polyurethane scaffold can be used to physically separate endothelial cells from perivascular cells to prevent their spontaneous capillary morphogenesis, yet enable their cross-talk to promote the formation of a stable endothelium. Our findings demonstrate the feasibility of engineering an endothelial lining from human adipose tissue, poising it for the rapid ex vivo endothelialization of small diameter vascular prostheses in an autologous, patient-specific manner.

Electrospun methacrylated natural/synthetic composite membranes for gingival tissue engineering

New functional materials for engineering gingival tissue are still in the early stages of development. Materials for such applications must maintain volume and have advantageous mechanical and biological characteristics for tissue regeneration, to be an alternative to autografts, which are the current benchmark of care. In this work, methacrylated gelatin (GelMa) was photocrosslinked with synthetic immunomodulatory methacrylated divinyl urethanes and defined monomers to generate composite scaffolds. Using a factorial design, with the synthetic monomers of a degradable polar/hydrophobic/ionic polyurethane (D-PHI) and GelMa, composite materials were electrospun with polycarbonate urethane (PCNU) and light-cured in-flight. The materials had significantly different relative hydrophilicities, with unique biodegradation profiles associated with specific formulations, thereby providing good guidance to achieving desired mechanical characteristics and scaffold resorption for gingival tissue regeneration. In accelerated esterase/collagenase degradation models, the new materials exhibited an initial rapid weight loss followed by a more gradual rate of degradation. The degradation profile allowed for the early infiltration of human adipose-derived stromal/stem cells, while still enabling the graft's structural integrity to be maintained. In conclusion, the materials provide a promising candidate platform for the regeneration of oral soft tissues, addressing the requirement of viable tissue infiltration while maintaining volume and mechanical integrity. STATEMENT OF SIGNIFICANCE: There is a need for the development of more functional and efficacious materials for the treatment of gingival recession. To address significant limitations in current material formulations, we sought to investigate the development of methacrylated gelatin (GelMa) and oligo-urethane/methacrylate monomer composite materials. A factorial design was used to electrospin four new formulations containing four to five monomers. Synthetic immunomodulatory monomers were crosslinked with GelMa and electrospun with a polycarbonate urethane resulting in unique mechanical properties, and resorption rates which align with the original design criteria for gingival tissue engineering. The materials may have applications in tissue engineering and can be readily manufactured. The findings of this work may help better direct the efforts of tissue engineering and material manufacturing.

Arrhenius-model-based degradable oligourethane hydrogels for controlled growth factor release

Biodegradable hydrogels are growing in demand to enable the delivery of biomolecules (e.g. growth factors) for regenerative medicine. This research investigated the resorption of an oligourethane/polyacrylic acid hydrogel, a biodegradable hydrogel which supports tissue regeneration. The Arrhenius model was used to characterize the resorption of the polymeric gels in relevant in vitro conditions, and the Flory-Rehner equation was used to correlate the volumetric swelling ratio with the extent of degradation. The study found that the swelling rate of the hydrogel follows the Arrhenius model at elevated temperatures, estimating degradation time in saline solution at 37°C to be between 5 and 13 months, serving as a preliminary approximation of degradation in vivo. The degradation products had low cytotoxicity towards endothelial cells, and the hydrogel supported stromal cell proliferation. Additionally, the hydrogels were able to release growth factors and maintain the biomolecules' bioactivity towards cell proliferation. The study of the vascular endothelial growth factor (VEGF) release from the hydrogel used a diffusion process model, showing that the electrostatic attraction between VEGF and the anionic hydrogel allowed for controlled and sustained VEGF release over three weeks. In a rat subcutaneous implant model, a selected hydrogel with desired degradation rates exhibited minimal foreign body response and supported M2a macrophage phenotype, and vascularization. The low M1 and high M2a macrophage phenotypes within the implants were associated with tissue integration. This research supports the use of oligourethane/polyacrylic acid hydrogels as a promising material for delivering growth factors and supporting tissue regeneration. STATEMENT OF SIGNIFICANCE: There is a need for degradable elastomeric hydrogels that can support the formation of soft tissues and minimize long-term foreign body responses. An Arrhenius model was used to estimate the relative breakdown of hydrogels, in-vitro. The results demonstrate that hydrogels made from a combination of poly(acrylic acid) and oligo-urethane diacrylates can be designed to resorb over defined periods ranging from months to years depending on the chemical formulation prescribed by the model. The hydrogel formulations also provided for different release profiles of growth factors, relevant to tissue regeneration. In-vivo, these hydrogels had minimal inflammatory effects and showed evidence of integration into the surrounding tissue. The hydrogel approach can help the field design a broader range of biomaterials for tissue regeneration.

A Polypyrrole-Polycarbonate Polyurethane Elastomer Alleviates Cardiac Arrhythmias via Improving Bio-Conductivity

Myocardial fibrosis, resulting from myocardial infarction (MI), significantly alters cardiac electrophysiological properties. As fibrotic scar tissue forms, its resistance to incoming action potentials increases, leading to cardiac arrhythmia, and eventually sudden cardiac death or heart failure. Biomaterials are gaining increasing attention as an approach for addressing post-MI arrhythmias. The current study investigates the hypothesis that a bio-conductive epicardial patch can electrically synchronize isolated cardiomyocytes in vitro and rescue arrhythmic hearts in vivo. A new conceived biocompatible, conductive, and elastic polyurethane composite bio-membrane, referred to as polypyrrole-polycarbonate polyurethane (PPy-PCNU), is developed, in which solid-state conductive PPy nanoparticles are distributed throughout an electrospun aliphatic PCNU nanofiber patch in a controlled manner. Compared to PCNU alone, the resulting biocompatible patch demonstrates up to six times less impedance, with no conductivity loss over time, as well as being able to influence cellular alignment. Furthermore, PPy-PCNU promotes synchronous contraction of isolated neonatal rat cardiomyocytes and alleviates atrial fibrillation in rat hearts upon epicardial implantation. Taken together, epicardially-implanted PPy-PCNU could potentially serve as a novel alternative approach for the treatment of cardiac arrhythmias.

Rational design of biodegradable thermoplastic polyurethanes for tissue repair

As a type of elastomeric polymers, non-degradable polyurethanes (PUs) have a long history of being used in clinics, whereas biodegradable PUs have been developed in recent decades, primarily for tissue repair and regeneration. Biodegradable thermoplastic (linear) PUs are soft and elastic polymeric biomaterials with high mechanical strength, which mimics the mechanical properties of soft and elastic tissues. Therefore, biodegradable thermoplastic polyurethanes are promising scaffolding materials for soft and elastic tissue repair and regeneration. Generally, PUs are synthesized by linking three types of changeable blocks: diisocyanates, diols, and chain extenders. Alternating the combination of these three blocks can finely tailor the physio-chemical properties and generate new functional PUs. These PUs have excellent processing flexibilities and can be fabricated into three-dimensional (3D) constructs using conventional and/or advanced technologies, which is a great advantage compared with cross-linked thermoset elastomers. Additionally, they can be combined with biomolecules to incorporate desired bioactivities to broaden their biomedical applications. In this review, we comprehensively summarized the synthesis, structures, and properties of biodegradable thermoplastic PUs, and introduced their multiple applications in tissue repair and regeneration. A whole picture of their design and applications along with discussions and perspectives of future directions would provide theoretical and technical supports to inspire new PU development and novel applications.

Compatibility and function of human induced pluripotent stem cell derived cardiomyocytes on an electrospun nanofibrous scaffold, generated from an ionomeric polyurethane composite

Synthetic scaffolds are needed for generating organized neo-myocardium constructs to promote functional tissue repair. This study investigated the biocompatibility of an elastomeric electrospun degradable polar/hydrophobic/ionic polyurethane (D-PHI) composite scaffold with human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). The composite material was electrospun to generate scaffolds, with nanofibres oriented in aligned or random directions. These features enabled the authors to evaluate the effect of characteristic elements which mimic that of the native extracellular matrix (alignment, chemical heterogeneity, and fiber topography) on hiPSC-CMs activity. The functional nature of the hiPSC-CM cultured on gelatin and Matrigel-coated scaffolds were assessed, investigating the influence of protein interactions with the synthetic substrate on subsequent cell phenotype. After 7 days of culture, high hiPSC-CM viability was observed on the scaffolds. The cells on the aligned scaffold were elongated and demonstrated aligned sarcomeres that oriented parallel to the direction of the fibers, while the cells on random scaffolds and a tissue culture polystyrene (TCPS) control did not exhibit such an organized morphology. The hiPSC-CMs cultured on the scaffolds and TCPS expressed similar levels of cardiac troponin-T, but there was a higher expression of ventricular myosin light chain-2 on the D-PHI composite scaffolds versus TCPS, indicating a higher proportion of hiPSC-CM exhibiting a ventricular cardiomyocyte like phenotype. Within 7 days, the hiPSC-CMs on aligned scaffolds and TCPS beat synchronously and had similar conductive velocities. These preliminary results show that aligned D-PHI elastomeric scaffolds allow hiPSC-CMs to demonstrate important cardiomyocytes characteristics, critical to enabling their future potential use for cardiac tissue regeneration.

Biomedical Applications of Polyurethane Hydrogels, Polyurethane Aerogels and Polyurethane-Graphene Nanocomposite Materials

BACKGROUND

Increasing new emerging ill-healths have posed therapeutic challenges in modern medicine. Hence polyurethane hydrogels that comprise polyol, copolymer and extender could be prepared from diverse chemical compounds with adjuvants such as ascorbic acid, sorbitol among others. Their mechano-physicochemical properties are functions of their biological activities. Therefore there is need to assess their therapeutic potentials.

METHODS

literature were searched on synthesis and medical uses of polyurethane - hydrogels, polyurethane - aerogels and polyurethane - graphene nanocomposite materials, with a view to identifying their sources, synthesis, mechanical and physiochemical properties, biomedical applications, chirality, and the relevance of Lipinski's rule of five in the synthesis of oral polyurethane nanocomposite materials.

RESULTS

The prepared hydrogels and aerogels could be used as polymer carriers for intradermal, cutaneous and intranasal drugs. They can be fabricated and used as prosthetics. In addition the strength modulus (tensile stress-tensile strain ratio), biodegradability, biocompatibility and non-toxic effects of the polyurethane hydrogels and aerogels are the highly desirable properties. However, body and environmental temperatures may contribute to their instability, hence there is need to improve on the synthesis of aerogels and hydrogels of polyurethane that can last for many years. Alcoholism, diabetes, pyrogenic diseases, mechanical and physical forces, and physiological variability may also reduce the life span of polyurethane aerogels and hydrogels.

CONCLUSION

Synthesis of polyurethane hydrogel-aerogel complex that can be used in complex, rare biomedical cases is of paramount importance. These hydrogels and aerogels may be hydrophobic, hydrophilic, aerophobic-aerophilic or amphiphilic and sometimes lipophilic depending on structural components and the intended biomedical uses. Polyurethane graphene nanocomposite materials are used in the treatment of a myriad of diseases including cancer and bacterial infection.

Self-Assembled Oligo-Urethane Nanoparticles: Their Characterization and Use for the Delivery of Active Biomolecules into Mammalian Cells

Developing safe and effective strategies to deliver biomolecules such as oligonucleotides and proteins into cells has grown in importance over recent years, with an increasing demand for non-viral methods that enable clinical translation. Here, we investigate uniquely configured oligo-urethane nanoparticles based on synthetic chemistries that minimize the release of pro-inflammatory biomarkers from immune cells, show low cytotoxicity in a broad range of cells, and efficiently deliver oligonucleotides and proteins into mammalian cells. The mechanism of cell uptake for the self-assembled oligo-urethane nanoparticles was shown to be directed by caveolae-dependent endocytosis in murine myoblasts (C₂C₁₂) cells. Inhibiting caveolae functions with genistein and methyl-β-cyclodextrin limited nanoparticle internalization. The nanoparticles showed a very high delivery efficiency for the genetic material (a 47-base oligonucleotide) (∼80% incorporation into cells) as well as the purified protein (full length firefly luciferase, 67 kDa) into human embryonic kidney (HEK293T) cells. Luciferase enzyme activity in HEK293T cells demonstrated that intact and functional proteins could be delivered and showed a significant extension of activity retention up to 24 h, well beyond the 2 h half-life of the free enzyme. This study introduces a novel self-assembled oligo-urethane nanoparticle delivery platform with very low associated production costs, enabled by their scalable chemistry (the benchwork cost is $ 0.152/mg vs $ 974.6/mg for typical lipid carriers) that has potential to deliver both oligonucleotides and proteins for biomedical purposes.

Electrospun nanofiber scaffold for vascular tissue engineering

Due to the prevalence of cardiovascular diseases, there is a large need for small diameter vascular grafts that cannot be fulfilled using autologous vessels. Although medium to large diameter synthetic vessels are in use, no suitable small diameter vascular graft has been developed due to the unique dynamic environment that exists in small vessels. To achieve long term patency, a successful tissue engineered vascular graft would need to closely match the mechanical properties of native tissue, be non-thrombotic and non-immunogenic, and elicit the proper healing response and undergo remodeling to incorporate into the native vasculature. Electrospinning presents a promising approach to the development of a suitable tissue engineered vascular graft. This review provides a comprehensive overview of the different polymers, techniques, and functionalization approaches that have been used to develop an electrospun tissue engineered vascular graft.

Sequence-Controlled Polyurethane Block Copolymer Displays Differentiated Immunoglobulin-G Adsorption That Influences Human Monocyte Adhesion and Activity

The ability to specify an adsorbed protein layer through the polymer chemistry design of immunomodulatory biomaterials is important when considering a desired immune response, such as reducing pro-inflammatory activity. Limited work has been undertaken to elucidate the role of monomer sequence in this process, when copolymeric systems are involved. In this study, we demonstrate the advantage of an alternating radical copolymerization strategy as opposed to a random statistical copolymerization to order monomers in the synthesis of degradable polar-hydrophobic-ionic polyurethanes (D-PHI), biomaterials originally designed to reduce inflammatory monocyte activation. A monomer system consisting of a vinyl-terminated polyurethane cross-linker, maleic acid (MA), and ethyl vinyl ether (EVE), not only generated a diverse chemical environment of polar, hydrophobic, and ionic functional groups, but also formed a charge transfer complex (CTC) reactive to alternating polymerizations. Conversion of MA and EVE occurred in a constant proportion regardless of monomer availability, a phenomenon not observed in conventional D-PHI formulations. For feeds with unequal molar quantities of MA and EVE, the final conversion was limited and proportional to the limiting reagent, leading to an overall higher polyurethane cross-linker content. The presence of a reactive CTC was also found to limit the monomer conversion. Compared to a D-PHI with random monomer arrangement using methacrylic acid (MAA) and methyl methacrylate (MMA), a reduction in Fab region exposure from adsorbed immunoglobulin G and a reduction in average adherent monocyte activity were found in the sequence-controlled version. These results represent the first example of using an alternating copolymerization approach to generate regularly defined polymer chemistries in radical chain-growth biomaterials for achieving immunomodulation, and highlight the importance of considering sequence control as a design strategy for future immunomodulatory biomaterial development.

Engineering functional microvessels in synthetic polyurethane random-pore scaffolds by harnessing perfusion flow

Recently reported biomaterial-based approaches toward prevascularizing tissue constructs rely on biologically or structurally complex scaffolds that are complicated to manufacture and sterilize, and challenging to customize for clinical applications. In the current work, a prevascularization method for soft tissue engineering that uses a non-patterned and non-biological scaffold is proposed. Human fibroblasts and HUVECs were seeded on an ionomeric polyurethane-based hydrogel and cultured for 14 days under medium perfusion. A flow rate of 0.05 mL/min resulted in a greater lumen density in the constructs relative to 0.005 and 0.5 mL/min, indicating the critical importance of flow magnitude in establishing microvessels. Constructs generated at 0.05 mL/min perfusion flow were implanted in a mouse subcutaneous model and intravital imaging was used to characterize host blood perfusion through the construct after 2 weeks. Engineered microvessels were functional (i.e. perfused with host blood and non-leaky) and neovascularization of the construct by host vessels was enhanced relative to non-prevascularized constructs. We report on the first strategy toward engineering functional microvessels in a tissue construct using non-bioactive, non-patterned synthetic polyurethane materials.

Synthesis and characterization of electrospun nanofibrous tissue engineering scaffolds generated from in situ polymerization of ionomeric polyurethane composites

Tissue scaffolds need to be engineered to be cell compatible, have timely biodegradable character, be functional with respect to providing niche cell support for tissue repair and regeneration, readily accommodate multiple cell types, and have mechanical properties that enable the simulation of the native tissue. In this study, electrospun degradable polar hydrophobic ionic polyurethane (D-PHI) scaffolds were generated in order to yield an extracellular matrix-like structure for tissue engineering applications. D-PHI oligomers were synthesized, blended with a degradable linear polycarbonate polyurethane (PCNU), and electrospun with simultaneous in situ UV cross-linking in order to generate aligned nanofibrous scaffolds in the form of elastomeric composite materials. The D-PHI/PCNU scaffold fibre morphology, cross-linking efficiency, surface nature, mechanical properties, in vivo degradation and integration, as well as in vitro cell compatibility were characterized. The results showed that D-PHI/PCNU scaffolds had a high cross-linking efficiency, stronger polar nature, and lower stiffness relative to PCNU scaffolds. In vivo, the D-PHI/PCNU scaffold degraded relatively slowly, thereby enabling new tissue time to form and yielding very good integration with the latter tissue. Based on a study with A10 vascular smooth muscle cells, the D-PHI/PCNU scaffold was able to support high cell viability, adhesion, and expression of typical smooth muscle cell markers after a 7-day culture period, which was comparable to PCNU scaffolds. These characterization results demonstrate that the unique properties of a D-PHI/PCNU scaffold, combined with the benefits of electrospinning, could allow for the generation of a tissue engineered scaffold that mimics important aspects of the native extracellular matrix and could be used for functional tissue regeneration. STATEMENT OF SIGNIFICANCE: Tissue engineered scaffolds should recapitulate native extracellular matrix features. This study investigates the processing of a classical polycarbonate polyurethane (PCNU) with a cross-linked and degradable ionomeric polyurethane (D-PHI), polymerized via in situ rapid light curing to yield a 3-dimensional co-electrospun nanofibre matrix with chemical diversity and low modulus character. This research advances the use of D-PHI for tissue engineering applications by providing a facile means of changing physical and chemical properties in classical PCNUs without the need to adjust spinning viscosities of the base polymer. Further, the in vivo and cell culture findings set the stage for introducing unique elastic materials which inherently support wound healing, repair, and regeneration in tissues, for applications that require the recapitulation of native extracellular matrix physical features.

Mitigation of monocyte driven thrombosis on cobalt chrome surfaces in contact with whole blood by thin film polar/hydrophobic/ionic polyurethane coatings

Monocytes are active at the crossroads between inflammation and coagulation processes since they can secrete pro-inflammatory cytokines and express tissue factor (TF), a major initiator of coagulation. Cobalt-chrome (CoCr), a metal alloy, used as a biomaterial for vascular stents, has been shown to be potentially pro-thrombotic and pro-inflammatory. Research work with a polymer from a family of degradable-polar hydrophobic ionic polyurethanes (D-PHI), called HHHI, has been shown to exhibit anti-inflammatory responses from human monocytes. We have generated multifunctional polyurethane thin films (MPTF) based on the HHHI chemistry, as a thin coating for CoCr and have evaluated the reactivity of blood with MPTF-coated CoCr. The results showed that the coating of CoCr with MPTF derived from HHHI prevents thrombin generation, reduces coagulation activation, and suppresses fibrin formation in whole blood. Activation of monocytes was also suppressed at the surface of MPTF-coated CoCr and specifically the decrease in thrombin generation was accompanied by a significant decrease in TF and pro-inflammatory cytokine levels. Mass spectroscopy of the adsorbed proteins showed lower levels of fibrinogen, fibronectin and complement C3, C4, and C8 when compared to CoCr. We can conclude that MPTFs reduce the pro-thrombotic and pro-inflammatory phenotype of monocytes and macrophages on CoCr, and prevent clotting in whole blood.

Synthesis of degradable-polar-hydrophobic-ionic co-polymeric microspheres by membrane emulsion photopolymerization: In vitro and in vivo studies

The synthesis of microspheres for tissue regeneration requires good control over the particle size and size distribution. This is particularly important when considering the immune response that may be triggered by the presence of particles in tissue. This report outlines the design of an injectable microsphere system using a low-inflammatory, degradable-polar-hydrophobic-ionic polyurethane, termed D-PHI, and investigates the system's performance in vitro and in vivo. Crosslinked polyurethane microspheres were prepared via a rapid and controlled process based on membrane emulsion and subsequent photopolymerization. The fabrication process efficiently generated microspheres with a narrow size distribution (12 ± 2 μm, PDI = 0.03). The D-PHI microspheres exhibited a slow and controlled degradation and a high capacity for water uptake. Water within the particles existed primarily within the pores of the particles and to a lesser degree within the polymer matrix itself. D-PHI microspheres supported human endothelial and fibroblast cell growth, and they maintained human blood-derived monocytes in a low-inflammatory state. Sub-acute toxicity was assessed for the particles after being administered via intramuscular injection in the gastrocnemius muscle of rats. Cellular infiltration and vascularization into the tissue region where the particles were deposited were observed along with an absence of a fibrous capsule around the particles. The microspheres did not cause elevated human monocyte induced inflammatory character, and supported tissue integration without a prolonged inflammatory response in the rat muscle. These injectable, degradable and low-inflammatory microspheres provide an attractive system for potential drug delivery and tissue regeneration applications in future studies. STATEMENT OF SIGNIFICANCE: Biodegradable, synthetic polymers are attractive candidates for generating tailored drug delivery vehicles and tissue scaffolds owing to their diverse chemical and physical properties that can be customised for delivering defined macromolecules at specific sites in the body. The past two decades have yielded interesting work exploring the fabrication of polymer microspheres with a narrow size distribution. However, the markedly low number of synthetic polymer chemistries currently used for microsphere production exhibit elevated proinflammatory character, both acute and chronic. Furthermore, a limited number of studies have explored the biocompatibility and immune response of polymeric microspheres with human primary cells and in vivo. In the current study, a method was conceived for efficiently generating low-activating polyurethane microspheres with respect to in vitro monocytes and in vivo macrophages. The biodegradable polyurethane, which contained multiple chemistry function and which has previously demonstrated anti-inflammatory properties in film and mm scale scaffold form, was selected as the base material. In this work we undertook the use of a room temperature membrane emulsification photopolymerization approach to avoid the need for high temperature cures and the use of solvents. The response of immune cells to the microspheres was studied with human primary cells and in the rat gastrocnemius muscle. The present work reveals important progress in the design of microspheres, with well-characterized low monocyte-activating properties and the translational advantages of a synthetic polyurethane which could be investigated in future studies for potential macromolecule delivery and tissue regeneration applications.

Coating of cobalt chrome substrates with thin films of polar/hydrophobic/ionic polyurethanes: Characterization and interaction with human immunoglobulin G and fibronectin

Biomaterial implants often lead to specific tissue reactions that could compromise their bio-integration and/or optimal cellular interactions. Polyurethanes (PU) are of particular interest as coatings to mask CoCr's bioactivity, since they are generally more biocompatible than metal substrates, present a broad range of chemistry, and have highly tunable-mechanical properties. In the current work, complex polyvinyl-urethanes (referred to as D-PHI materials) are studied for their surface phase structures: specifically, an original D-PHI polymer (O-D-PHI) and a differential formulation with relatively higher hydrophobic and ionic content (HHHI) are of interest. The PUs are diluted in tetrahydrofuran (THF) to generate thin films which differentially influence the physical and chemical properties of the D-PHI coatings. AFM images over time show the gradual appearance of domains exhibiting crystalline organisation, and whose shape and size were dependent on D-PHI thickness (thin films vs non-solvent cast resin materials). After three weeks, a complete stabilization of the crystal state is observed. The thin coatings are stable in an aqueous and 37 °C environment. The adsorption of two human plasmatic proteins Immunoglobulin G (IgG) and Fibronectin (Fn), involved in inflammation and coagulation, was studied. The exposure of specific protein sequences (IgG-Fab, Fn-Cell Binding Domain and Fn-N-terminal domain) were dramatically reduced on both D-PHI materials when compared to bare metal CoCr. The implications of these findings would be relevant to defining coating strategies used to improve the blood clotting and immune cell reactivity to CoCr implant materials.

Mono vs multilayer fibronectin coatings on polar/hydrophobic/ionic polyurethanes: Altering surface interactions with human monocytes

Monocyte interactions with materials that are biofunctionalized with fibronectin (Fn) are of interest because of the documented literature which associates this protein with white blood cell function at implant sites. A degradable-polar hydrophobic ionic polyurethane (D-PHI), has been reported to promote an anti-inflammatory response from human monocytes. The aim of the current work was to study the influence of intrinsic D-PHI material chemistry on Fn adsorption (mono and multi-layer structures), and to investigate the influence of such chemistry on the structural state of the Fn, as well as the latter's influence on the activity of human monocytes on the protein coated substrates. Significant differences in Fn adsorption, surface hydrophobicity and the availability of defined peptide sequences (N terminal, C terminal or Cell Binding Domain) for the Fn in mono vs multilayer structures were observed as a function of the changes in intrinsic material chemistry. A D-PHI-formulated polyurethane substrate with subtle changes in anionic and hydrophobic domain content relative to the polar non-ionic urethane/carbonate groups within the polymer matrix promoted the lowest activation of monocytes, in the presence of multi-layer Fn constructs. These results highlight the importance of chemical heterogeneity as a design parameter for biomaterial surfaces, and establishes a desired strategy for controlling human monocyte activity at the surface of devices, when these are coated with multi-layer Fn structures. The latter is an important step towards functionalizing the materials with multi-layer protein drug carriers as interventional therapeutic agents.

STATEMENT OF SIGNIFICANCE

The control of the behavior of monocytes, especially migration and activation, is of crucial interest to modulate the inflammatory response at the site of implanted biomaterial. Several studies report the influence of adsorbed serum proteins on the behavior of monocytes on biomaterials. However, few studies show the influence of surface chemical group distribution on the controlled adsorption and the subsequent induced conformation- of mono versus multi-layer assembled structures generated from specific proteins implicated in wound repair. The current research considered the role of Fn adsorption and conformation in thin films while interacting with the intrinsic chemistry of segmented block polyurethanes; and the influence of the former on modulation and activation of human monocytes.

Hemocompatibility of Degrading Polymeric Biomaterials: Degradable Polar Hydrophobic Ionic Polyurethane versus Poly(lactic-co-glycolic) Acid

The use of degradable polymers in vascular tissue regeneration has sparked the need to characterize polymer biocompatibility during degradation. While tissue compatibility has been frequently addressed, studies on polymer hemocompatibility during degradation are limited. The current study evaluated the differences in hemocompatibility (platelet response, complement activation, and coagulation cascade initiation) between as-made and hydrolyzed poly(lactic-co-glycolic) acid (PLGA) and degradable polar hydrophobic ionic polyurethane (D-PHI). Platelet activation decreased (in whole blood) and platelet adhesion decreased (in blood without leukocytes) for degraded versus as-made PLGA. D-PHI showed minimal hemocompatibility changes over degradation. Leukocytes played a major role in mediating platelet activation for samples and controls, as well as influencing platelet-polymer adhesion on the degraded materials. This study demonstrates the importance of assessing the blood compatibility of biomaterials over the course of degradation since the associated changes in surface chemistry and physical state could significantly change biomaterial hemocompatibility.

Hemocompatibility studies on a degradable polar hydrophobic ionic polyurethane (D-PHI)

Biomaterial blood compatibility is a complex process that involves four key pathways, including the coagulation cascade, the complement system, platelets, and leukocytes. While many studies have addressed the initial contact of blood with homopolymeric (e.g. Teflon) or simple copolymeric (e.g. Dacron) biomaterials, relatively less attention has been given to investigating blood coagulation with respect to complex copolymeric systems containing well defined and diverse function. The current study sought to assess the hemocompatibility of a complex polyurethane (PU) containing a unique combination of polar, hydrophobic, and ionic domains (D-PHI). This included a whole blood (WB) study, followed by tests on the intrinsic and extrinsic coagulation pathways, complement activation, platelet activation, and an assessment of the effect of leukocytes on platelet-biomaterial interactions. A small increase in blood clot formation was observed on D-PHI in WB; however, there was no significant increase in clotting via the intrinsic coagulation cascade. No significant increase in platelet adhesion and only a very slight increase in platelet activation were observed in comparison to albumin-coated substrates (negative control). D-PHI showed mild complement activation and increased initiation of the extrinsic pathway of coagulation, along with the observation that leukocytes were important in mediating platelet-biomaterial interactions. It is proposed that complement is responsible for activating coagulation by inciting leukocytes to generate tissue factor (TF), which causes extrinsic pathway activation. This low level of blood clotting on D-PHI's surface may be necessary for the beneficial wound healing of vascular constructs that has been previously reported for this material.

STATEMENT OF SIGNIFICANCE

Understanding the hemocompatibility of devices intended for blood-contacting applications is important for predicting device failure. Hemocompatibility is a complex parameter (affected by at least four different mechanisms) that measures the level of thrombus generation and immune system activation resulting from blood-biomaterial contact. The complexity of hemocompatibility implies that homopolymers are unlikely to solve the clotting challenges that face most biomaterials. Diversity in surface chemistry (containing hydrophobic, ionic, and polar domains) obtained from engineered polyurethanes can lead to favourable interactions with blood. The current research considered the effect of a highly functionalized polyurethane biomaterial on all four mechanisms in order to provide a comprehensive in vitro measure of the hemocompatibility of this unique material and the important mechanisms at play.

Immunomodulatory polymeric scaffold enhances extracellular matrix production in cell co-cultures under dynamic mechanical stimulation

Despite the importance of immune cells in regulating the wound healing process following injury, there are few examples of synthetic biomaterials that have the capacity to push the body's immune cells toward pro-regeneration phenotypes, and fewer still that are designed with the intention of achieving this immunomodulatory character. While monocytes and their derived macrophages have been recognized as important contributors to tissue remodeling in vivo, this is primarily believed to be due to their ability to regulate other cell types. The ability of monocytes and macrophages to generate tissue products themselves, however, is currently not well appreciated within the field of tissue regeneration. Furthermore, while monocytes/macrophages are found in remodeling tissue that is subjected to mechanical loading, the effect this biomechanical strain on monocytes/macrophages and their ability to regulate tissue-specific cellular activity has not been understood due to the complexity of the many factors involved in the in vivo setting, hence necessitating the use of controlled in vitro culture platforms to investigate this phenomenon. In this study, human monocytes were co-cultured with human coronary artery smooth muscle cells (VSMCs) on a tubular (3mm ID) degradable polyurethane scaffold, with a unique combination of non-ionic polar, hydrophobic and ionic chemistry (D-PHI). The goal was to determine if such a synthetic matrix could be used in a co-culture system along with dynamic biomechanical stimulus (10% circumferential strain, 1Hz) conditions in order to direct monocytes to enhance tissue generation, and to better comprehend the different ways in which monocytes/macrophages may contribute to new tissue production. Mechanical strain and monocyte co-culture had a complementary and non-mitigating effect on VSMC growth. Co-culture samples demonstrated increased deposition of sulphated glycosaminoglycans (GAGs) and elastin, as well as increases in the release of FGF-2, a growth factor that can stimulate VSMC growth, while dynamic culture supported increases in collagen I and III as well as increased mechanical properties (elastic modulus, tensile strength) vs. static controls. Macrophage polarization toward an M1 state was not promoted by the biomaterial or culture conditions tested. Monocytes/macrophages cultured on D-PHI were also shown to produce vascular extracellular matrix components, including collagen I, collagen III, elastin, and GAGs. This study highlights the use of synthetic biomaterials having immunomodulatory character in order to promote cell and tissue growth when used in tissue engineering strategies, and identifies ECM deposition by monocytes/macrophages as an unexpected source of this new tissue.

STATEMENT OF SIGNIFICANCE

The ability of biomaterials to regulate macrophage activation towards a wound healing phenotype has recently been shown to support positive tissue regeneration. However, the ability of immunomodulatory biomaterials to harness monocyte/macrophage activity to support tissue engineering strategies in vitro holds enormous potential that has yet to be investigated. This study used a monocyte co-culture on a degradable polyurethane (D-PHI) to regulate the response of VSMCs in combination with biomechanical strain in a vascular tissue engineering context. Results demonstrate that immunomodulatory biomaterials, such as D-PHI, that support a desirable macrophage activation state can be combined with biomechanical strain to augment vascular tissue production in vitro, in part due to the novel and unexpected contribution of monocytes/macrophages themselves producing vascular ECM proteins.

Interaction of a block-co-polymeric biomaterial with immunoglobulin G modulates human monocytes towards a non-inflammatory phenotype

Monocyte interactions with implanted biomaterials can contribute significantly to the ability of a biomaterial to support tissue integration and wound healing, as opposed to a chronic pro-inflammatory foreign body reaction, provided the materials are designed to do so. However, there are few biomaterials available designed to regulate immune cell response with the intention of reducing the pro-inflammatory activation state. Material chemistry is a powerful tool for regulating protein and cell interactions that can be incorporated into surfaces while maintaining desired mechanical properties. The aspects of material chemistry that can support monocyte activation away from a pro-inflammatory state are still poorly understood. Protein adsorption is a key initial event that transforms the surface of a biomedical device into a biological substrate that will govern subsequent cellular interactions. In this study, the chemistry of degradable block polyurethanes, termed degradable polar hydrophobic ionic (D-PHI) polyurethanes, were studied for their unique interactions with bound immunoglobulin G (IgG), a pro-inflammatory protein that supports monocyte-biomaterial interactions. The specific immunological active sites of the polyurethane-adsorbed protein were compared with IgG's adsorbed state on a homopolymeric material with surface chemistry conducive to cell interactions, e.g. tissue culture polystyrene (TCPS). IgG-coated TCPS supported sustained monocyte adhesion and enhanced monocyte spreading, effects not observed with IgG-coated PU. The degradable PU was subsequently shown to reduce the number of exposed IgG-Fab sites following pre-adsorption vs. IgG adsorbed to TCPS, with antibody inhibition experiments demonstrating that Fab-site exposure appears to dominate monocyte-biomaterial interactions. Minor changes in chemical segments within the PU molecular chains were subsequently investigated for their influence on directing IgG interactions towards reducing pro-inflammatory activity. A reduction in chemical heterogeneity within the PU, without significant differences in other material properties known to regulate monocyte response, was shown to increase Fab exposure and subsequently led to monocyte interactions similar to those observed for IgG-coated TCPS. These results infer that reduced IgG-Fab site exposure can be directed by material chemistry to attenuate pro-inflammatory monocyte interactions with biomaterial surfaces, and identify the chemical features of polymeric biomaterial design responsible for this process.

STATEMENT OF SIGNIFICANCE

There is currently limited understanding of material design features that can regulate protein-material interactions in order to prevent adverse inflammatory responses to implanted biomaterials. In this paper, monocyte interactions with biomaterials (specifically a block co-polymeric degradable polyurethane [D-PHI] and tissue culture polystyrene [TCPS]) were investigated as a function of their interactions with adsorbed immunoglobulin G (IgG). D-PHI was shown to attenuate IgG-induced monocyte retention and spreading by reducing IgG-Fab site exposure upon adsorption relative to TCPS. Aspects of D-PHI chemistry important in regulating Fab site exposure were determined. This study thus identifies features of biomaterials, using D-PHI as a case study, which can contribute to the development of new immunomodulatory biomaterial design.

The fabrication of double layer tubular vascular tissue engineering scaffold via coaxial electrospinning and its 3D cell coculture

A continuous electrospinning technique was applied to fabricate double layer tubular tissue engineering vascular graft (TEVG) scaffold. The luminal layer was made from poly(ɛ-caprolac-tone)(PCL) ultrafine fibers via common single axial electrospinning followed by the outer layer of core-shell structured nanofibers via coaxial electrospinning. For preparing the outer layernano-fibers, the PCL was electrospun into the shell and both bovine serum albumin (BSA) and tetrapeptide val-gal-pro-gly (VAPG) were encapsulated into the core. The core-shell structure in the outer layer fibers was observed by transmission electron microscope (TEM). The in vitro release tests exhibited the sustainable release behavior of BSA and VAPG so that they provided a better cell growth environment in the interior of tubular scaffold wall. The in vitro culture of smooth muscle cells (SMCs) demonstrated their potential to penetrate into the scaffold wall for the 3D cell culture. Subsequently, 3D cell coculture was conducted. First, SMCs were seeded on the luminal surface of the scaffold and cultured for 5 days, and then endothelial cells (ECs) were also seeded on the luminal surface and cocultured with SMCs for another 2 days. After stained with antibodies, 3D cell distribution on the scaffold was revealed by confocal laser scanning microscopy (CLSM) where ECs were mainly located on the luminal surface whereas SMCs penetrated into the surface and distributed inside the scaffold wall. This double layer tubular scaffold with 3D cell distribution showed the promise to develop it into a novel TEVG for clinical trials in the near future.

In vitro investigations of a novel wound dressing concept based on biodegradable polyurethane

Non-healing and partially healing wounds are an important problem not only for the patient but also for the public health care system. Current treatment solutions are far from optimal regarding the chosen material properties as well as price and source. Biodegradable polyurethane (PUR) scaffolds have shown great promise for in vivo tissue engineering approaches, but accomplishment of the goal of scaffold degradation and new tissue formation developing in parallel has not been observed so far in skin wound repair. In this study, the mechanical properties and degradation behavior as well as the biocompatibility of a low-cost synthetic, pathogen-free, biocompatible and biodegradable extracellular matrix mimicking a PUR scaffold was evaluated in vitro. The novel PUR scaffolds were found to meet all the requirements for optimal scaffolds and wound dressings. These three-dimensional scaffolds are soft, highly porous, and form-stable and can be easily cut into any shape desired. All the material formulations investigated were found to be nontoxic. One formulation was able to be defined that supported both good fibroblast cell attachment and cell proliferation to colonize the scaffold. Tunable biodegradation velocity of the materials could be observed, and the results additionally indicated that calcium plays a crucial role in PUR degradation. Our results suggest that the PUR materials evaluated in this study are promising candidates for next-generation wound treatment systems and support the concept of using foam scaffolds for improved in vivo tissue engineering and regeneration.

Characterization of a degradable polar hydrophobic ionic polyurethane with circulating angiogenic cells in vitro

This study investigated the interaction of human circulating angiogenic cells (CACs) with a degradable polar hydrophobic ionic polyurethane (D-PHI) which has been previously shown to exhibit anti-inflammatory character and favorable interactions with human endothelial cells (ECs). Given the implication of the CACs in microvessel development it was of intrinsic interest to expand our knowledge of D-PHI biocompatibility with this relevant primary cell involved in angiogenesis. The findings will be compared to a well-established benchmark substrate for CACs, fibronectin-coated tissue culture polystyrene (TCPS). Immunoblotting analysis showed that CACs were a heterogeneous population of cells composed mostly of monocytic cells expressing the CD14 marker. Assessment of the cytokine release profile, using ELISA, showed that D-PHI supported a higher concentration of interleukin-10 (IL-10) when compared to the concentration of tumor necrosis factor alpha, which is indicative of an anti-inflammatory phenotype, and was different from the response with TCPS. It was found that the CACs were attached to D-PHI and remained viable and functional (nitric oxide production) during the seven days of culture. However, there did not appear to be any significant proliferation on D-PHI, contrary to the CAC growth on fibronectin-coated TCPS. It was concluded that D-PHI displayed some of the qualities suitable to enable the retention of CACs onto this substrate, as well as maintaining an anti-inflammatory phenotype, characteristics which have been reported to be important for angiogenesis in vivo.

Monocyte/macrophage cytokine activity regulates vascular smooth muscle cell function within a degradable polyurethane scaffold

Tissue engineering strategies rely on the ability to promote cell proliferation and migration into porous biomaterial constructs, as well as to support specific phenotypic states of the cells in vitro. The present study investigated the use of released factors from monocytes and their derived macrophages (MDM) and the mechanism by which they regulate vascular smooth muscle cell (VSMC) response in a VSMC-monocyte co-culture system within a porous degradable polyurethane (D-PHI) scaffold. VSMCs cultured in monocyte/MDM-conditioned medium (MCM), generated from the culture of monocytes/MDM on D-PHI scaffolds for up to 28 days, similarly affected VSMC contractile marker expression, growth and three-dimensional migration when compared to direct VSMC-monocyte co-culture. Monocyte chemotactic protein-1 (MCP-1) and interleukin-6 (IL-6) were identified as two cytokines present in MCM, at concentrations that have previously been shown to influence VSMC phenotype. VSMCs cultured alone on D-PHI scaffolds and exposed to MCP-1 (5 ng ml(-1)) or IL-6 (1 ng ml(-1)) for 7 days experienced a suppression in contractile marker expression (with MCP-1 or IL-6) and increased growth (with MCP-1) compared to no cytokine medium supplementation. These effects were also observed in VSMC-monocyte co-culture on D-PHI. Neutralization of IL-6, but not MCP-1, was subsequently shown to decrease VSMC growth and enhance calponin expression for VSMC-monocyte co-cultures on D-PHI scaffolds for 7 days, implying that IL-6 mediates VSMC response in monocyte-VSMC co-cultures. This study highlights the use of monocytes and their derived macrophages in conjunction with immunomodulatory biomaterials, such as D-PHI, as agents for regulating VSMC response, and demonstrates the importance of monocyte/MDM-released factors, such as IL-6 in particular, in this process.

Perfused culture of gingival fibroblasts in a degradable/polar/hydrophobic/ionic polyurethane (D-PHI) scaffold leads to enhanced proliferation and metabolic activity

Periodontal diseases cause the breakdown of the tooth-supporting gingival tissue. In treatments aimed at gingival tissue regeneration, tissue engineering is preferred over the common treatments such as scaling. Perfused (dynamic) culture has been shown to increase cell growth in tissue-engineered scaffolds. Since gingival tissues are highly vascularized, it was desired to investigate the influence of perfusion on the function of human gingival fibroblasts (HGF) when cultured in a degradable/polar/hydrophobic/ionic polyurethane scaffold during the early culture phase (4weeks) of engineering gingival tissues. It was observed that the growth of HGF was continuous over 28days in dynamic culture (3-fold increase, p<0.05), while it was reduced after 14days in static culture (i.e. no flow condition). Cell metabolic activity, as measured by a WST-1 assay, and total protein production show that HGF were in different metabolic states in the dynamic vs. static cultures. Observations from scanning electron microscopy and type I collagen (Col I) production measured by Western blotting suggest that medium perfusion significantly promoted collagen production in HGF after the first 4weeks of culture (p<0.05). The different proliferative and metabolic states for HGF in the perfused scaffolds suggest a different cell phenotype which may favour tissue regeneration.

Co-culturing monocytes with smooth muscle cells improves cell distribution within a degradable polyurethane scaffold and reduces inflammatory cytokines

Activated monocytes can promote inflammation or wound repair, depending on the nature of the implant environment. Recent work showed that a degradable, polar-hydrophobic-ionic polyurethane (D-PHI) induced an anti-inflammatory monocyte phenotype. In the current study it is hypothesized that wound-healing phenotype monocytes (activated by D-PHI material chemistry) will promote human vascular smooth muscle cells (hVSMC) to attach and migrate into porous D-PHI scaffolds. hVSMC migration is necessary for hVSMC population of the scaffold and tissue formation to occur, and then, once tissue formation is complete, the monocyte should promote contractile phenotype markers in the hVSMC. hVSMC were cultured for up to 28 days with or without monocytes and analyzed for cell viability, attachment (DNA) and migration. Lysates were analyzed for the hVSMC contractile phenotype markers calponin and α-smooth muscle actin (α-SMA) as well as urokinase plasminogen activator (uPA; pro-migration marker) using immunoblotting analysis. Histological staining showed that hVSMC alone remained around the perimeter of the scaffold, whereas co-culture samples had co-localization of monocytes with hVSMC in the pores, a more even cell distribution throughout the scaffold and increased total cell attachment (P<0.05). Co-culture samples had higher cell numbers and more DNA than the addition of both single cell cultures. The water-soluble tetrazolium-1 data suggested that cells were not dying over the 28 day culture period. Calponin, also linked to cell motility, was maintained up to 28 days in the co-culture and hVSMC alone, whereas α-SMA disappeared after 7 days. Co-cultures on D-PHI showed that monocytes were activated to a wound-healing phenotype (low TNF-α, elevated IL-10), while promoting uPA expression. In summary, this study showed that, by co-culturing monocytes with hVSMC, the latter showed increased total cell attachment and infiltration into the D-PHI scaffold compared with hVSMC alone, suggesting that monocytes may promote hVSMC migration, a condition necessary for ultimately achieving uniform tissue formation in porous scaffolds.

Functional characterization of human coronary artery smooth muscle cells under cyclic mechanical strain in a degradable polyurethane scaffold

There are few synthetic elastomeric biomaterials that simultaneously provide the required biological conditioning and the ability to translate biomechanical stimuli to vascular smooth muscle cells (VSMCs). Biomechanical stresses are important physiological elements that regulate VSMC function, and polyurethane elastomers are a class of materials capable of facilitating the translation of stress induced biomechanics. In this study, human coronary artery smooth muscle cells (hCASMCs), which were seeded into a porous degradable polar/hydrophobic/ionic (D-PHI) polyurethane scaffold, were subjected to uniaxial cyclic mechanical strain (CMS) over a span of four weeks using a customized bioreactor. The distribution, proliferation and contractile protein expression of hCASMCs in the scaffold were then analyzed and compared to those grown under static conditions. Four weeks of CMS, applied to the elastomeric scaffold, resulted in statistically greater DNA mass, more cell area coverage and a better distribution of cells deeper within the scaffold construct. Furthermore, CMS samples demonstrated improved tensile mechanical properties following four weeks of culture, suggesting the generation of more extracellular matrix within the polyurethane constructs. The expression of smooth muscle α-actin, calponin and smooth muscle myosin heavy chain and the absence of Ki-67+ cells in both static and CMS cultures, throughout the 4 weeks, suggest that hCASMCs retained their contractile character on these biomaterials. The study highlights the importance of implementing physiologically-relevant biomechanical stimuli in the development of synthetic elastomeric tissue engineering scaffolds.

Biodegradation and in vivo biocompatibility of a degradable, polar/hydrophobic/ionic polyurethane for tissue engineering applications

A degradable, polar/hydrophobic/ionic polyurethane (D-PHI) scaffold was optimized in in vitro studies to yield mechanical properties appropriate to replicate vascular graft tissue while eliciting a more wound-healing phenotype macrophage when compared to established materials. The objectives of this study were to characterize the biodegradation (in vitro and in vivo) and assess the in vivo biocompatibility of D-PHI, comparing it to a well-established, commercially-available scaffold biomaterial, polylactic glycolic acid (PLGA), recognized as being degradable, non-cytotoxic, and showing good biocompatibility. PLGA and D-PHI were formed into 6 mm diameter disk-shaped scaffolds (2 mm thick) of similar porosity (∼82%) and implanted subcutaneously in rats. Both PLGA and D-PHI scaffolds were well-tolerated at the 7 d time point in vivo. In vitro D-PHI scaffolds degraded slowly (only 12 wt% in PBS in vitro after 120 d at 37 °C). In vivo, D-PHI scaffolds degraded at a more controlled rate (7 wt% loss over the acute 7 d implant phase and subsequently a linear profile of degradation leading to a 21 wt% mass loss by 100 d (chronic period)) than PLGA scaffolds which showed an initial more rapid degradation (14 wt% over 7 d), followed by minimal change between 7 and 30 d, and then a very rapid breakdown of the scaffold over the next 60 d. Histological examination of D-PHI scaffolds showed tissue ingrowth into the pores increased with time whereas PLGA scaffolds excluded cells/tissue from its porous structure as it degraded. The results of this study suggest that D-PHI has promising qualities for use as an elastomeric scaffold material for soft TE applications yielding well integrated tissue within the scaffold and a controlled rate of degradation stabilizing the form and shape of the implant.

Quantitative grafting of peptide onto the nontoxic biodegradable waterborne polyurethanes to fabricate peptide modified scaffold for soft tissue engineering

Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) peptide has frequently been used in the biomedical materials to enhance adhesion and proliferation of cells. In this work, we modified the nontoxic biodegradable waterborne polyurethanes (WBPU) with GRGDSP peptide and fabricated 3-D porous scaffold with the modified WBPU to investigate the effect of the immobilized GRGDSP peptide on human umbilical vein endothelial cells (HUVECs) adhesion and proliferation. A facile and reliable approach was first developed to quantitative grafting of GRGDSP onto the WBPU molecular backbone using ethylene glycol diglycidyl ether (EX810) as a connector. Then 3-D porous WBPU scaffolds with various GRGDSP content were fabricated by freeze-drying the emulsion. In both of the HUVECs adhesion and proliferation tests, enhanced cell performance was observed on the GRGDSP grafted scaffolds compared with the unmodified scaffolds and the tissue culture plate (TCP). The adhesion rate and proliferation rate increased with the increase of GRGDSP content in the scaffold and reached a maximum with peptide concentration of 0.85 μmol/g based on the weight of the polyurethanes. These results illustrate the necessity of the effective control of the GRGDSP content in the modified WBPU and support the potential utility of these 3-D porous modified WBPU scaffolds in the soft tissue engineering to guide cell adhesion, proliferation and tissue regeneration.

Spatial control of gene expression within a scaffold by localized inducer release

Gene expression can be controlled in genetically modified cells by employing an inducer/promoter system where presence of the inducer molecule regulates the timing and level of gene expression. By applying the principles of controlled release, it should be possible to control gene expression on a biomaterial surface by the presence or absence of inducer release from the underlying material matrix, thus avoiding alternative techniques that rely upon uptake of relatively labile DNA from material surfaces. To evaluate this concept, a modified ecdysone-responsive gene expression system was transfected into B16 murine cells and the ability of an inducer ligand, which was released from elastomeric poly(ester urethane) urea (PEUU), to initiate gene expression was studied. The synthetic inducer ligand was first loaded into PEUU to demonstrate extended release of the bioactive molecule at various loading densities over a one year period in vitro. Patterning films of PEUU variably-loaded with inducer resulted in spatially controlled cell expression of the gene product (green fluorescent protein, GFP). In porous scaffolds made from PEUU by salt leaching, where the central region was exclusively loaded with inducer, cells expressed GFP predominately in the loaded central regions whereas expression was minimal in outer regions where ligand was omitted. This scaffold system may ultimately provide a means to precisely control progenitor cell commitment in a spatially-defined manner in vivo for soft tissue repair and regeneration.

Differentiation of monocytes on a degradable, polar, hydrophobic, ionic polyurethane: Two-dimensional films vs. three-dimensional scaffolds

A degradable, polar, hydrophobic, ionic polyurethane (D-PHI), with physical properties comparable to those of peripheral arterial vascular tissue, was evaluated for monocyte interactions with two different physical forms: two-dimensional films and three-dimensional porous scaffolds. Monocytes, isolated from human whole blood, were seeded onto D-PHI films and scaffolds, and differentiated to monocyte-derived macrophages (MDM) for up to 28 days. The effect of surface structure on the MDM phenotype was assessed by assaying: cell attachment (DNA), activation (intracellular protein expression, esterase and acid phosphatase (AP) activity) as well as pro- and anti-inflammatory cytokines (TNF-α and IL-10, respectively). The cells on scaffolds exhibited an initial peak in total protein synthesized per DNA at 3 days; however, both substrates generated similar protein levels per DNA at all other time points. While scaffolds generated more esterase and AP per cell than for films, the cells on films expressed significantly more of these two proteins relative to their total protein produced. At day 7 (acute phase of monocyte activation), cells on films were significantly more activated than monocytes on the scaffolds as assessed by cell morphology and tumor necrosis factor-α and interleukin-10 levels. Histological analysis of scaffolds showed that cells were able to migrate throughout the three-dimensional matrix. By inducing a low inflammatory, high wound-healing phenotype monocyte, the negative effects of the foreign body reaction in vivo may be controlled in a manner possible to direct the vascular tissue cells into the appropriate functional phenotypes necessary for successful tissue engineering.