One-dimensional titanium dioxide nanomaterials: nanotubes

Hydroxide-Derived Nanostructures: Scalable Synthesis, Characterization, Properties, and Potential Applications

Metal oxide nanostructures have received an increasing attention owing to their unique chemical and physical properties along with their widespread applications in various fields. This article provides an overview of the recent discovery - christened Hydroxides-Derived Nanostructures, or HDNs - in which hydroxide aqueous solutions (mostly tetramethylammonium hydroxide, TMAH) are reacted at temperatures < 100 °C and under atmospheric pressure with various metal-containing precursors to scalably prepare novel metal oxide nanostructures. In one case, a dozen commercial and earth abundant Ti-containing powders such as binary carbides, nitrides, borides, among others, are converted into new, 1D TiO2-based lepidocrocite (1DL) nanofilaments (NFs). Application-wise, the 1DLs show outstanding performance in a number of energy, environmental, and biomedical fields such as photo- and electrocatalysis, water splitting, lithium-sulfur and lithium-ion batteries, water purification, dye degradation, cancer therapy, and polymer composites. In addition to 1DL, the HDNs family encompasses other metal oxides nanostructures including magnetic Fe3O4 nanoparticles and MnO2 birnessite-based crystalline 2D flakes. The latter showed promise in electrochemical energy conversion and storage applications. The developed recipe provides a new vista in the molecular self-assembly synthesis of nanomaterials that can advance the field with a library of novel nanostructures with substantial implications in a multitude of fields.

Copper-Decorated Titanium Electrodes: Impact of Surface Modifications of Substrate on the Morphology and Electrochemical Performance

This study investigates the effect of surface modifications of the titanium substrate on the growth of electrochemically deposited copper. These materials are intended to serve as cathodes in the electroreduction of nitrates in aqueous solutions. Surface modifications included the use of hydrogen fluoride for titanium etching and anodization to promote the growth of a structured titania nanotube array. The effect of an intermediate calcination step for the nanotubes before deposition was assessed along with a comparison to an untreated substrate electrode. The materials were comprehensively characterized by SEM, XRD, contact angle, potentiodynamic tests, EIS, and cyclic voltammetry. Their electrocatalytic ability was tested in the reduction of aqueous solutions containing nitrates. The results reveal that surface finishing impacted the shape and size of the Cu microparticles, as well as the nucleation mechanism enabling a crystal-facet-controllable synthesis. All the materials exhibited microsized copper particles with a spherical shape with some clusters. On the etched titanium surface, a high number of heterogeneous submicroscopic particles were also present. The thermally treated anodized substrate promoted the development of a combination of sparse microparticles corresponding to defect sites in amorphous titanium and the presence of a diffuse coating of octahedral nanosized particles whose growth was promoted by the tetragonal structure of anatase crystals. Electrochemical tests display reduced charge transfer resistance upon copper deposition on the modified substrates, which is indicative of the enhanced conductivity of the coated materials. Additionally, cyclic voltammetry and electrolysis experiments reveal the electrodes' potential for nitrate reduction, showing a better response for the etched titanium substrate (30% nitrate removal, after 2 h at 25 mA cm-2).

Enhanced Photocatalytic H2 Generation by Light-Induced Carbon Modification of TiO2 Nanotubes

Titanium dioxide (TiO2) is the material of choice for photocatalytic and electrochemical applications owing to its outstanding physicochemical properties. However, its wide bandgap and relatively low conductivity limit its practical application. Modifying TiO2 with carbon species is a promising route to overcome these intrinsic complexities. In this work, we propose a facile method to modify TiO2 nanotubes (NTs) based on the remnant organic electrolyte retained inside the nanotubes after the anodization process, that is, without removing it by immersion in ethanol. Carbon-modified TiO2 NTs (C-TiO2 NTs) showed enhanced H2 evolution in photocatalysis under UV illumination in aqueous solutions. When the C-TiO2 NTs were subjected to UV light illumination, the carbon underwent modification, resulting in higher measured photocurrents in the tube layers. After UV illumination, the IPCE of the C-TiO2 NTs was 4.4-fold higher than that of the carbon-free TiO2 NTs.

The Challenges and Opportunities for TiO2 Nanostructures in Gas Sensing

Chemiresistive gas sensors based on metal oxides have been widely applied in industrial monitoring, medical diagnosis, environmental pollutant detection, and food safety. To further enhance the gas sensing performance, researchers have worked to modify the structure and function of the material so that it can adapt to different gas types and environmental conditions. Among the numerous gas-sensitive materials, n-type TiO2 semiconductors are a focus of attention for their high stability, excellent biosafety, controllable carrier concentration, and low manufacturing cost. This Perspective first introduces the sensing mechanism of TiO2 nanostructures and composite TiO2-based nanomaterials and then analyzes the relationship between their gas-sensitive properties and their structure and composition, focusing also on technical issues such as doping, heterojunctions, and functional applications. The applications and challenges of TiO2-based nanostructured gas sensors in food safety, medical diagnosis, environmental detection, and other fields are also summarized in detail. Finally, in the context of their practical application challenges, future development technologies and new sensing concepts are explored, providing new ideas and directions for the development of multifunctional intelligent gas sensors in various application fields.

A critical review on the recent trends of photocatalytic, antibacterial, antioxidant and nanohybrid applications of anatase and rutile TiO2 nanoparticles

Titanium dioxide nanoparticles (TiO2 NPs) have become a focal point of research due to their widespread daily use and diverse synthesis methods, including physical, chemical, and environmentally sustainable approaches. These nanoparticles possess unique attributes such as size, shape, and surface functionality, making them particularly intriguing for applications in the biomedical field. The continuous exploration of TiO2 NPs is driven by the quest to enhance their multifunctionality, aiming to create next-generation products with superior performance. Recent research efforts have specifically focused on understanding the anatase and rutile phases of TiO2 NPs and evaluating their potential in various domains, including photocatalytic processes, antibacterial properties, antioxidant effects, and nanohybrid applications. The hypothesis guiding this research is that by exploring different synthesis methods, particularly chemical and environmentally friendly approaches, and incorporating doping and co-doping techniques, the properties of TiO2 NPs can be significantly improved for diverse applications. The study employs a comprehensive approach, investigating the effects of nanoparticle size, shape, dose, and exposure time on performance. The synthesis methods considered encompass both conventional chemical processes and environmentally friendly alternatives, with a focus on how doping and co-doping can enhance the properties of TiO2 NPs. The research unveils valuable insights into the distinct phases of TiO2 NPs and their potential across various applications. It sheds light on the improved properties achieved through doping and co-doping, showcasing advancements in photocatalytic processes, antibacterial efficacy, antioxidant capabilities, and nanohybrid applications. The study concludes by emphasizing regulatory aspects and offering suggestions for product enhancement. It provides recommendations for the reliable application of TiO2 NPs, addressing a comprehensive spectrum of critical aspects in TiO2 NP research and application. Overall, this research contributes to the evolving landscape of TiO2 NP utilization, offering valuable insights for the development of innovative and high-performance products.

Detailed Insight into Photocatalytic Inactivation of Pathogenic Bacteria in the Presence of Visible-Light-Active Multicomponent Photocatalysts

The use of heterogeneous photocatalysis in biologically contaminated water purification processes still requires the development of materials active in visible light, preferably in the form of thin films. Herein, we report nanotube structures made of TiO2/Ag2O/Au0, TiO2/Ag2O/PtOx, TiO2/Cu2O/Au0, and TiO2/Cu2O/PtOx obtained via one-step anodic oxidation of the titanium-based alloys (Ti94Ag5Au1, Ti94Cu5Pt1, Ti94Cu5Au1, and Ti94Ag5Pt1) possessing high visible light activity in the inactivation process of methicillin-susceptible S. aureus and other pathogenic bacteria-E. coli, Clostridium sp., and K. oxytoca. In the samples made from Ti-based alloys, metal/metal oxide nanoparticles were formed, which were located on the surface and inside the walls of the NTs. The obtained results showed that oxygen species produced at the surface of irradiated photocatalysts and the presence of copper and silver species in the photoactive layers both contributed to the inactivation of bacteria. Photocatalytic inactivation of E. coli, S. aureus, and Clostridium sp. was confirmed via TEM imaging of bacterium cell destruction and the detection of CO2 as a result of bacteria cell mineralization for the most active sample. These results suggest that the membrane ruptures as a result of the attack of active oxygen species, and then, both the membrane and the contents are mineralized to CO2.

Nanoscale Topography of Anodic TiO2 Nanostructures Is Crucial for Cell-Surface Interactions

Anodic titanium dioxide (TiO2) nanostructures, i.e., obtained by electrochemical anodization, have excellent control over the nanoscale morphology and have been extensively investigated in biomedical applications owing to their sub-100 nm nanoscale topography range and beneficial effects on biocompatibility and cell interactions. Herein, we obtain TiO2 nanopores (NPs) and nanotubes (NTs) with similar morphologies, namely, 15 nm diameter and 500 nm length, and investigate their characteristics and impact on stem cell adhesion. We show that the transition of TiO2 NPs to NTs occurs via a pore/wall splitting mechanism and the removal of the fluoride-rich layer. Furthermore, in contrast to the case of NPs, we observe increased cell adhesion and proliferation on nanotubes. The enhanced mesenchymal stem cell adhesion/proliferation seems to be related to a 3-fold increase in activated integrin clustering, as confirmed by immunogold labeling with β1 integrin antibody on the nanostructured layers. Moreover, computations of the electric field and surface charge density show increased values at the inner and outer sharp edges of the top surfaces of the NTs, which in turn can influence cell adhesion by increasing the bridging interactions mediated by proteins and molecules in the environment. Collectively, our results indicate that the nanoscale surface architecture of the lateral spacing topography can greatly influence stem cell adhesion on substrates for biomedical applications.

Comparison between microporous and nanoporous orthodontic miniscrews : An experimental study in rabbits

PURPOSE

Surface characteristics of orthodontic miniscrews might affect survival rates and removal torque values (RTVs). This experimental study aimed to clarify whether and why a microporous or nanoporous surface promotes higher survival rates and RTVs for orthodontic miniscrews.

METHODS

Using a split-leg design, one set each of nonporous (sham control, n = 24) and microporous (control, n = 6), and three sets of nanoporous (experimental, n = 6 per set) miniscrews were implanted in the tibias of 12 New Zealand rabbits and immediately loaded with 1.5 N nickel-titanium coil springs for 12 weeks. The surface morphology, micropores, and nanotube diameters of the miniscrews were examined using scanning electron microscopy and field-emission scanning electron microscopy. The surface composition and thickness were determined using Auger electron spectroscopy. The survival rates and RTVs of each set were assessed.

RESULTS

The nanoporous miniscrews had higher survival rates, RTVs (p < 0.001), and thicker nanotube oxide thicknesses (p < 0.001) than the nonporous and microporous miniscrews. The nonporous and microporous miniscrews had no nanotube structures. The surface oxide composition was titanium dioxide (TiO2). The threshold RTV, TiO2 thickness, and nanotube diameter of nanoporous miniscrews needed to promote the experimental survival rate to 100% was determined to be 6.6 ± 0.8 N-cm (p < 0.05), 22.5 ± 4.8 nm (p < 0.05), and 17.6 ± 2.3 nm or above, respectively.

CONCLUSION

Nanoporous surfaces promoted higher survival rates and RTVs than microporous miniscrews. This could be due to TiO2 nanotube structures with thicker oxide layers in nanoporous miniscrews.

The new method of ZnIn2S4 synthesis on the titania nanotubes substrate with enhanced stability and photoelectrochemical performance

In this work, ZnIn2S4 layers were obtained on fluorine doped tin oxide (FTO) glass and TiO2 nanotubes (TiO2NT) using a hydrothermal process as photoanodes for photoelectrochemical (PEC) water splitting. Then, samples were annealed and the effect of the annealing temperature was investigated. Optimization of the deposition process and annealing of ZnIn2S4 layers made it possible to obtain an FTO-based material generating a photocurrent of 1.2 mA cm-2 at 1.62 V vs. RHE in a neutral medium. In contrast, the highest photocurrent in the neutral electrolyte obtained for the TiO2NT-based photoanode reached 0.5 mA cm-2 at 1.62 V vs. RHE. In addition, the use of a strongly acidic electrolyte allowed the generated photocurrent by the TiO2NT-based photoanode to increase to 3.02 mA cm-2 at 0.31 V vs. RHE. Despite a weaker photoresponse in neutral electrolyte than the optimized FTO-based photoanode, the use of TiO2NT as a substrate allowed for a significant increase in the photoanode's operating time. After 2 h of illumination, the photocurrent response of the TiO2NT-based photoanode was 0.21 mA cm-2, which was 42% of the initial value. In contrast, the FTO-based photoanode after the same time generated a photocurrent of 0.02 mA cm-2 which was only 1% of the initial value. The results indicated that the use of TiO2 nanotubes as a substrate for ZnIn2S4 deposition increases the photoanode's long-term stability in photoelectrochemical water splitting. The proposed charge transfer mechanism suggested that the heterojunction between ZnIn2S4 and TiO2 played an important role in improving the stability of the material by supporting charge separation.

Rational Integration of SnMOF/SnO2 Hybrid on TiO2 Nanotube Arrays: An Effective Strategy for Accelerating Formaldehyde Sensing Performance at Room Temperature

Formaldehyde is ubiquitously found in the environment, meaning that real-time monitoring of formaldehyde, particularly indoors, can have a significant impact on human health. However, the performance of commercially available interdigital electrode-based sensors is a compromise between active material loading and steric hindrance. In this work, a spaced TiO2 nanotube array (NTA) was exploited as a scaffold and electron collector in a formaldehyde sensor for the first time. A Sn-based metal-organic framework was successfully decorated on the inside and outside of TiO2 nanotube walls by a facile solvothermal decoration strategy. This was followed by regulated calcination, which successfully integrated the preconcentration effect of a porous Sn-based metal-organic framework (SnMOF) structure and highly active SnO2 nanocrystals into the spaced TiO2 NTA to form a Schottky heterojunction-type gas sensor. This SnMOF/SnO2@TiO2 NTA sensor achieved a high room-temperature formaldehyde response (1.7 at 6 ppm) with a fast response (4.0 s) and recovery (2.5 s) times. This work provides a new platform for preparing alternatives to interdigital electrode-based sensors and offers an effective strategy for achieving target preconcentrations for gas sensing processes. The as-prepared SnMOF/SnO2@TiO2 NTA sensor demonstrated excellent sensitivity, stability, reproducibility, flexibility, and convenience, showing excellent potential as a miniaturized device for medical diagnosis, environmental monitoring, and other intelligent sensing systems.

Fabrication of Laser-Induced Graphene Based Flexible Sensors Using 355 nm Ultraviolet Laser and Their Application in Human-Computer Interaction System

In recent years, flexible sensors based on laser-induced graphene (LIG) have played an important role in areas such as smart healthcare, smart skin, and wearable devices. This paper presents the fabrication of flexible sensors based on LIG technology and their applications in human-computer interaction (HCI) systems. Firstly, LIG with a sheet resistance as low as 4.5 Ω per square was generated through direct laser interaction with commercial polyimide (PI) film. The flexible sensors were then fabricated through a one-step method using the as-prepared LIG. The applications of the flexible sensors were demonstrated by an HCI system, which was fabricated through the integration of the flexible sensors and a flexible glove. The as-prepared HCI system could detect the bending motions of different fingers and translate them into the movements of the mouse on the computer screen. At the end of the paper, a demonstration of the HCI system is presented in which words were typed on a computer screen through the bending motion of the fingers. The newly designed LIG-based flexible HCI system can be used by persons with limited mobility to control a virtual keyboard or mouse pointer, thus enhancing their accessibility and independence in the digital realm.

Spontaneous Dewetting of Au-Thin Layers on Oxide- and Fluorine-Terminated Single Crystalline Anatase and Efficient Use in Photocatalytic H2 Production

In the present work, the spontaneous dewetting of thin Au layers on single crystalline anatase nanosheets into narrow-disperse Au nanoparticles is investigated. Patterns of the Au particles can be formed on the main facets of anatase that provide a high co-catalytic activity for photocatalytic generation of H2 . Dewetting is distinctly influenced by the respective facets (001) and (101), the deposit thickness, and secondary thermal dewetting, but most strongly by the surface termination of the nanosheets. Fluoride termination not only leads to an enhanced Au-phobic behavior but strongly affects the co-catalytic activity for photocatalytic generation of H2 . While fluoride termination with or without Au decoration is detrimental for hole transfer, the interplay of the Au co-catalyst and surface fluoride yields highly beneficial effect for electron transfer. This results in a three-times higher photocatalytic H2 production for the F-terminated surface. The findings suggest that dewetting of Au on surface fluorinated TiO2 is an effective way to modulate surface dewetting and achieve a strongly enhanced photocatalytic activity.

Nanoporous Titanium Oxynitride Nanotube Metamaterials with Deep Subwavelength Heat Dissipation for Perfect Solar Absorption

We report a quasi-unitary broadband absorption over the ultraviolet-visible-near-infrared range in spaced high aspect ratio, nanoporous titanium oxynitride nanotubes, an ideal platform for several photothermal applications. We explain such an efficient light-heat conversion in terms of localized field distribution and heat dissipation within the nanopores, whose sparsity can be controlled during fabrication. The extremely large heat dissipation could not be explained in terms of effective medium theories, which are typically used to describe small geometrical features associated with relatively large optical structures. A fabrication-process-inspired numerical model was developed to describe a realistic space-dependent electric permittivity distribution within the nanotubes. The resulting abrupt optical discontinuities favor electromagnetic dissipation in the deep sub-wavelength domains generated and can explain the large broadband absorption measured in samples with different porosities. The potential application of porous titanium oxynitride nanotubes as solar absorbers was explored by photothermal experiments under moderately concentrated white light (1-12 Suns). These findings suggest potential interest in realizing solar-thermal devices based on such simple and scalable metamaterials.

A novel recyclable hemoperfusion adsorbent based on TiO2 nanotube arrays for the selective removal of β2-microglobulin

Prolonged and excessive accumulation of β2-microglobulin (β2m) in the blood can lead to various kidney-related and other diseases. Currently, the most effective method of removing β2m from the blood is hemoperfusion. Although some traditional hemoperfusion adsorbents such as cellulose and polystyrene microspheres have been used for the removal of β2m, their selectivity still needs improvement. Immunosorbents have been developed to address this issue, but high cost and limited application are concerns. TiO2 nanotube arrays (TNTAs) have shown great potential in adsorption-related biomedical applications. In this study, we designed and developed a novel TNTA-based hemoperfusion adsorbent for the removal of β2m, which has demonstrated good biocompatibility, selectivity, and reusability. We investigated the β2m adsorption capacities of TNTAs with different pore sizes. The results indicate that TNTAs with a pore size matching the size of β2m exhibit higher adsorption capacity while also having lower adsorption capacity for albumin, showing the importance of pore size on the selectivity of adsorbents. Additionally, green regeneration of TNTAs is achieved via the photocatalytic activity originating from TiO2. Even after five cycles, the adsorption capacity of TNTAs remained above 70%. Our work demonstrates that inorganic materials with ordered pores are capable to be candidates for hemoperfusion, possessing advantages over traditional organic materials such as high stability, security, and low cost.

Tubular nanomaterials for bone tissue engineering

Nanomaterial composition, morphology, and mechanical performance are critical parameters for tissue engineering. Within this rapidly expanding space, tubular nanomaterials (TNs), including carbon nanotubes (CNTs), titanium oxide nanotubes (TNTs), halloysite nanotubes (HNTs), silica nanotubes (SiNTs), and hydroxyapatite nanotubes (HANTs) have shown significant potential across a broad range of applications due to their high surface area, versatile surface chemistry, well-defined mechanical properties, excellent biocompatibility, and monodispersity. These include drug delivery vectors, imaging contrast agents, and scaffolds for bone tissue engineering. This review is centered on the recent developments in TN-based biomaterials for structural tissue engineering, with a strong focus on bone tissue regeneration. It includes a detailed literature review on TN-based orthopedic coatings for metallic implants and composite scaffolds to enhance in vivo bone regeneration.

Investigating the use of titanium dioxide (TiO2) nanoparticles on the amount of protection against UV irradiation

In this study, three samples of commercial titanium dioxide nanoparticles (TiO₂) in different sizes were used to investigate their effect on the formulation of sunscreen creams. The aim was to evaluate their role in the performance of sunscreens (i.e. SPF, UVAPF, and critical wavelength). Then the particle size of these samples was determined by photon correlation spectroscopy methods. As a result, the size of primary particles was reduced by using milling and homogenization methods at different times. The results showed that the particle size of samples TA, TB, and TC in the ultrasonic homogenizer decreased from 966.4, 2745.8, and 2471.6 nm to 142.6, 254.8, and 262.8 nm, respectively. These particles were used in the pristine formulation. Then the functional characteristics of each formulation were determined by standard methods. TA had the best dispersion in cream compared to other samples due to its smaller size (i.e. 142.6 nm). For each formulation, two important parameters, including pH and TiO₂ dosage, were investigated in different states. The results showed that the formulations prepared with TA had the lowest viscosity compared to formulations containing TB and TC. SPSS 17 statistical software analysis of variance showed that the performance of SPF, UVAPF and λc in formulations containing TA had the highest levels. Also, the sample containing TAU with the lowest particle size values had the highest protection against UV rays (SPF). According to the photocatalytic functionality of TiO₂, the photodegradation of methylene blue in the presence of each nanoparticle of TiO₂ was studied. The results showed that smaller nanoparticles (i.e. TA) had more photocatalytic activity under UV-Vis irradiation during 4 h (TA (22%) > TB (16%) > TC (15%)). The results showed that titanium dioxide can be used as a suitable filter against all types of UVA and UVB rays.

Au/TiO2-based molecularly imprinted photoelectrochemical sensor for dibutyl phthalate detection

A photoelectrochemical molecular imprinting sensor based on Au/TiO₂ nanocomposite was constructed for the detection of dibutyl phthalate. Firstly, TiO₂ nanorods were grown on fluorine-doped tin oxide substrate by hydrothermal method. Then, gold nanoparticles were electrodeposited on TiO₂ to fabricate Au/TiO₂. Finally, molecular imprinted polymer was electropolymerized on the Au/TiO₂ surface to construct MIP/Au/TiO₂ PEC sensor for DBP. The conjugation effect of MIP accelerates the electron transfer between TiO₂ and MIP, which can greatly improve the photoelectric conversion efficiency and sensitivity of the sensor. In addition, MIP can also provide sites for highly selective recognition of dibutyl phthalate molecules. Under optimal experimental conditions, the prepared photoelectrochemical sensor was used for the quantitative determination of DBP and the results showed a wide linear range (50 to 500 nM), a low limit of detection (0.698 nM), and good selectivity. The sensor was used in a study of real water samples to show that it has promising applications in environmental analysis.

Chirality Effects and Semiconductor versus Metallic Nature in Halide Nanotubes

A density functional theory study of the electronic structure of nanostructures based on the hexagonal layers of LuI₃ is reported. Both bulk and slabs with one to three layers exhibit large and indirect bandgaps. Different families of nanotubes can be generated from these layers. Semiconducting nanotubes of two different chiralities have been studied. The direct or indirect nature of the optical gaps depends on the chirality, and a simple rationalization of this observation based on band folding arguments is provided. Remarkably, a metastable form of the armchair LuI₃ nanotubes can be obtained under a structural rearrangement such that some iodine atoms are segregated toward the center of the nanotube forming chains of dimerized iodines. These nanotubes having an Lu_2N I_5N backbone are predicted to be metallic and should be immune toward a Peierls distortion. The iodine chains in the inner part of the nanotubes are weakly bound to the backbone so that it should be possible to remove these chains to generate a new series of neutral Lu_2N I_5N nanotubes which could exhibit interesting magnetic behavior. Because the LuI₃ structure occurs for a large number of lanthanide and actinide trihalides, a tuning of the optical, transport, and probably magnetic properties of these new families of nanotubes can be a challenging prospect for future experimental studies.

Synthesis and Characterization of Nanostructured Oxide Layers on Ti-Nb-Zr-Ta and Ti-Nb-Zr-Fe Biomedical Alloys

Nanoporous/nanotubular complex oxide layers were developed on high-fraction β phase quaternary Ti-Nb-Zr-Ta and Ti-Nb-Zr-Fe promising biomedical alloys with a low elasticity modulus. Surface modification was achieved by electrochemical anodization aimed at the synthesis of the morphology of the nanostructures, which exhibited inner diameters of 15–100 nm. SEM, EDS, XRD, and current evolution analyses were performed for the characterization of the oxide layers. By optimizing the process parameters of electrochemical anodization, complex oxide layers with pore/tube openings of 18–92 nm on Ti-10Nb-10Zr-5Ta, 19–89 nm on Ti-20Nb-20Zr-4Ta, and 17–72 nm on Ti-29.3Nb-13.6Zr-1.9Fe alloys were synthesized using 1 M H3PO4 + 0.5 wt% HF aqueous electrolytes and 0.5 wt% NH4F + 2 wt% H20 + ethylene glycol organic electrolytes.

Novel bilayer coating on gentamicin-loaded titanium nanotube for orthopedic implants applications

Fabricating a multifunctional orthopedic implant which prevents post-surgery infection is highly desirable in advanced materials applications. However, designing an antimicrobial implant, which simultaneously promotes a sustained drug release and satisfactory cell proliferation, remains a challenge. The current study presents a drug-loaded surface-modified titanium nanotube (TNT) implant with different surface chemistry which was developed to investigate the effect of surface coating on drug release, antimicrobial activity, and cell proliferation. Accordingly, sodium alginate and chitosan were coated on the surface of TNT implants with different coating orders through layer-by-layer assembly. The coatings' swelling ratio and degradation rate were around 613% and 75%, respectively. The drug release results showed that surface-coatings prolonged the releasing profile for about 4 weeks. Chitosan coated TNTs demonstrated greater inhibition zone at 16.33mm compared with the other samples where no inhibition zone was observed. However, chitosan and alginate coated TNTs exhibited smaller inhibition zones at 48.56mm and 43.28mm, respectively, compared to bare TNT, which can be attributed to the coatings preventing the antibiotic burst release. Higher viability of cultured osteoblast cells was observed for chitosan-coated TNT as the top layer compared to the bare TNT at 12.18%, indicating improved bioactivity of TNT implants when the chitosan has the most contact with cells. Coupled with the cell viability assay, molecular dynamics (MD) simulations were carried out by placing collagen and fibronectin near the considered substrates. In agreement with cell viability results, MD simulations also indicated that chitosan had the highest adsorption energy approximately 60Kcal/mol. In summary, the proposed bilayer chitosan-coated drug-loaded TNT implant with chitosan and sodium alginate coating as the top and the bottom layers, respectively, can be a potential candidate for orthopedic applications in the light of its bacterial biofilm prevention, better osteoconductivity, and providing an adequate drug release profile.

Transcriptomic hallmarks of in vitro TiO2 nanotubes toxicity in Chlamydomonas reinhardtii

Recently, more accessible transcriptomic approaches have provided a new and deeper understanding of environmental toxicity. The present study focuses on the transcriptomic profiles of green microalgae Chlamydomonas reinhardtii exposed to new industrially promising material, TiO₂ nanotubes (NTs), as an example of a widely used one-dimensional nanomaterial. The first algal in vitro assay included 2.5 and 7.5 mg/L TiO₂ NTs, resulting in a dose-dependent negative effect on biological endpoints. At a working concentration of 7.5 mg/L, RNA-sequencing showed a mainly negative effect on the cells. In summary, the results indicated metabolic disruption, ^{such as ATP loss, damage to mitochondria and chloroplasts, loss of solutes due to permeated membranes,} and cell wall damage. Moreover, apoptosis-induced transcripts were detected. Interestingly, reactivation of transposons was observed. In signalling and transcription pathways, including chromatin remodelling and locking, the annotated genes were downregulated.

Titanium dioxide nanotubes increase purinergic receptor P2Y6 expression and activate its downstream PKCα-ERK1/2 pathway in bone marrow mesenchymal stem cells under osteogenic induction

Titanium dioxide (TiO₂) nanotubes can improve the osseointegration of pure titanium implants, but this exact mechanism has not been fully elucidated. The purinergic receptor P2Y6 is expressed in bone marrow mesenchymal stem cells (BMSCs) and participates in the regulation of bone metabolism. However, it is unclear as to whether P2Y6 is involved in the osteogenic differentiation of BMSCs induced by TiO₂ nanotubes. TiO₂ nanotubes were prepared on the surface of titanium specimens using the anodizing method and characterized their features. Quantitative reverse transcriptase polymerase chain reaction and western blotting were used to detect the expression of P2Y6, markers of osteogenic differentiation, and PKCα-ERK1/2. A rat femoral defect model was established to evaluate the osseointegration effect of TiO₂ nanotubes combined with P2Y6 agonists. The results showed that the average inner diameter of the TiO₂ nanotubes increased with an increase in voltage (voltage range of 30-90V), and the expression of P2Y6 in BMSCs could be upregulated by TiO₂ nanotubes in osteogenic culture. Inhibition of P2Y6 expression partially inhibited the osteogenic effect of TiO₂ nanotubes and downregulated the activity of the PKCα-ERK1/2 pathway. When using in vitro and in vivo experiments, the osteogenic effect of TiO₂ nanotubes when combined with P2Y6 agonists was more pronounced. TiO₂ nanotubes promoted the P2Y6 expression of BMSCs during osteogenic differentiation and promoted osteogenesis by activating the PKCα-ERK1/2 pathway. The combined application of TiO₂ nanotubes and P2Y6 agonists may be an effective new strategy to improve the osseointegration of titanium implants. STATEMENT OF SIGNIFICANCE: Titanium dioxide (TiO₂) nanotubes can improve the osseointegration of pure titanium implants, but this exact mechanism has not been fully elucidated. The purinergic receptor P2Y6 is expressed in bone marrow mesenchymal stem cells (BMSCs) and participates in the regulation of bone metabolism. However, it is unclear as to whether P2Y6 is involved in the osteogenic differentiation of BMSCs induced by TiO₂ nanotubes. For the first time, this study revealed the relationship between TiO₂ nanotubes and purine receptor P2Y6, and further explored its mode of action, which may provide clues as to the regulatory role of TiO₂ nanotubes on osteogenic differentiation of BMSCs. These findings will help to develop novel methods for guiding material design and biosafety evaluation of nano implants.

Modification of Liquid Separation Membranes Using Multidimensional Nanomaterials: Revealing the Roles of Dimension Based on Classical Titanium Dioxide

Membrane technology has become increasingly popular and important for separation processes in industries, as well as for desalination and wastewater treatment. Over the last decade, the merger of nanotechnology and membrane technology in the development of nanocomposite membranes has emerged as a rapidly expanding research area. The key motivation driving the development of nanocomposite membranes is the pursuit of high-performance liquid separation membranes that can address the bottlenecks of conventionally used polymeric membranes. Nanostructured materials in the form of zero to three-dimensions exhibit unique dimension-dependent morphology and topology that have triggered considerable attention in various fields. While the surface hydrophilicity, antibacterial, and photocatalytic properties of TiO₂ are particularly attractive for liquid separation membranes, the geometry-dependent properties of the nanocomposite membrane can be further fine-tuned by selecting the nanostructures with the right dimension. This review aims to provide an overview and comments on the state-of-the-art modifications of liquid separation membrane using TiO₂ as a classical example of multidimensional nanomaterials. The performances of TiO₂-incorporated nanocomposite membranes are discussed with attention placed on the special features rendered by their structures and dimensions. The innovations and breakthroughs made in the synthesis and modifications of structure-controlled TiO₂ and its composites have enabled fascinating and advantageous properties for the development of high-performance nanocomposite membranes for liquid separation.

Design an efficient photoelectrochemical aptasensor for PCB72 based on CdTe@CdS core@shell quantum dots-decorated TiO2 nanotubes

In this work, an efficient and novel photoelectrochemical (PEC) aptasensor for 2,3',5,5'-tetrachlorobiphenyl (PCB72) was constructed based on CdTe@CdS core@shell quantum dots (CdTe@CdS QDs)-decorated TiO₂ nanotubes (TiO₂ NTs). CdTe@CdS QDs were prepared by the combination of CdTe and CdS with a proper lattice mismatch. Due to their large band offsets, core@shell QDs can reduce undesirable carrier recombination, significantly improving their charge separation efficiency. Then the synthesized CdTe@CdS QDs were modified on TiO₂ NTs (CdTe@CdS QDs/TiO₂ NTs) through electrostatic adsorption method. The as-prepared composites exhibit a wide visible light absorption range, good PEC activity and high photoelectric conversion efficiency. Also, the PEC aptasensor prepared via the immobilization of anti-PCB72 aptamer on the composites exhibits outstanding analytical performance with high sensitivity and specificity for PCB72 under visible-light irradiation, achieving a detection limit as low as 0.03 ng/L. It was also applied to detect PCB72 in four different real environmental samples with satisfactory results.

Supercapacitive performance of C-axis preferentially oriented TiO2 nanotube arrays decorated with MoO3 nanoparticles

The highest specific capacitance of the MoO3-p-CTNTA electrode achieved is 194 F g−1 at a current density of f 1 A g−1.

Anodic TiO2 Nanotube Layers for Wastewater and Air Treatments: Assessment of Performance Using Sulfamethoxazole Degradation and N2O Reduction

The preparation of anodic TiO₂ nanotube layers has been performed using electrochemical anodization of Ti foil for 4 h at different voltages (from 0 V to 80 V). In addition, a TiO₂ thin layer has been also prepared using the sol-gel method. All the photocatalysts have been characterized by XRD, SEM, and DRS to investigate the crystalline phase composition, the surface morphology, and the optical properties, respectively. The performance of the photocatalyst has been assessed in versatile photocatalytic reactions including the reduction of N₂O gas and the oxidation of aqueous sulfamethoxazole. Due to their high specific surface area and excellent charge carriers transport, anodic TiO₂ nanotube layers have exhibited the highest N₂O conversion rate (up to 10% after 22 h) and the highest degradation extent of sulfamethoxazole (about 65% after 4 h) under UVA light. The degradation mechanism of sulfamethoxazole has been investigated by analyzing its transformation products by LC-MS and the predominant role of hydroxyl radicals has been confirmed. Finally, the efficiency of the anodic TiO₂ nanotube layer has been tested in real wastewater reaching up to 45% of sulfamethoxazole degradation after 4 h.

Recent progress in one dimensional TiO2 nanomaterials as photoanodes in dye-sensitized solar cells

Exploiting the vast possibilities of crystal and electronic structural modifications in TiO2 based nanomaterials creatively attracted the scientific community to various energy applications. A dye sensitised solar cell, which converts photons into electricity, is considered a viable solution for the generation of electricity. TiO2 nanomaterials were well accepted as photoanode materials in dye-sensitized solar cells, and possess non-toxicity, high surface area, high electron transport rates, fine tuneable band gap, high resistance to photo corrosion and optimum pore size for better diffusion of dye and electrolyte. This review focuses on various aspects of TiO2 nanomaterials as photoanodes in dye-sensitized solar cells. TiO2 photoanode modification via doping and morphological variations were discussed in detail. The impact of various morphologies on the design of TiO2 photoanodes was particularly stressed.

Application of cellulose nanocrystals in water treatment membranes: A review

Nanomaterials have brought great changes to human society, and development has gradually shifted the focus to environmentally friendly applications. Cellulose nanocrystals (CNCs) are new one-dimensional nanomaterials that exhibit environmental friendliness and ensure the biological safety of water environment. CNCs have excellent physical and chemical properties, such as simple preparation process, nanoscale size, high specific surface area, high mechanical strength, good biocompatibility, high hydrophilicity and antifouling ability. Because of these characteristics, CNCs are widely used in ultrafiltration membranes, nanofiltration membranes and reverse osmosis membranes to solve the problems hindering development of membrane technology, such as insufficient interception and separation efficiency, low mechanical strength and poor antifouling performance. This review summarizes recent developments and uses of CNCs in water treatment membranes and discusses the challenges and development prospects of CNCs materials from the perspectives of ecological safety and human health by comparing them with traditional one-dimensional nanomaterials.

A comparative study of two-step anodization with one-step anodization at constant voltage

Two-step anodization has been widely used because it can produce highly self-organized anodic TiO₂nanotubes, but the differences in morphology and current-time curve of one-step anodization and two-step anodization are rarely reported. Here, one-step anodization and two-step anodization were conducted at different voltages. By comparing the FESEM image of anodic TiO₂nanotubes fabricated by one-step anodization and two-step anodization, it was found that the variation of morphology characteristics is same with voltage. The distinction of morphology and current-time curve between one-step anodization and two-step anodization at the same voltage were analyzed: the nanotube average growth rate and porosity of two-step anodization are greater than that of one-step anodization. In the current-time curve, the duration of stage I and stage II in two-step anodization are significantly shorter than one-step anodization. The traditional field-assisted dissolution theory cannot explain the three stages of the current-time curves and their physics meaning under different voltages in the same fluoride electrolyte. Here, the distinction between one-step anodization and two-step anodization was clarified successfully by the theories of ionic current and electronic current and oxygen bubble mould.

Transfer of a Photocatalytically Active TiO2 Nanotube Array onto Cementitious Materials

Due to a recent change concerning the risk and hazard regulations of titanium dioxide powders, which possibly leads to restrictions in the use of those materials in photocatalytic applications, an alternative utilization of titanium dioxide is shown in this work. This is achieved by covering surfaces of cement-based materials with a regular-shaped monolayer of photocatalytically active titanium dioxide nanotube arrays which are not affected by the regulation changes due to their shape and size. This study delivers a proposal for the synthesis of TiO₂ nanotubes via anodization and their post-treatment to generate detached crystalline nanotube arrays which can be easily transferred onto material surfaces. We show that the transfer of such nanostructured materials can be achieved by modifying the cement mold, showing the opportunity for applying the material to precast elements. The composite material is characterized by referencing the morphology and photocatalytic activity.

Engineering hierarchical FeS2/TiO2 nanotubes on Ti mesh as a tailorable flow-through catalyst belt for all-day-active degradation of organic pollutants and pathogens

The increasing organic and microbiological pollutions in fresh water caused by human activities and industrial development have become a global concern nowadays. In this study, three-dimensional (3D) hierarchical FeS₂/TiO₂ structures with nanotube geometries were grown on a Ti mesh (M-TNTAs-FeS₂). Benefitting from the abundant available reactive sites on the open 3D micro/nanoporous structures, excellent photocatalytic activity of FeS₂/TiO₂ heterostructure in solar light, and satisfactory Fenton activity of FeS₂, the obtained M-TNTAs-FeS₂ exhibits outstanding performance as an all-day-active catalyst. Importantly, flexible meshes can be easily tailored and enveloped into fluorinated ethylene propylene (FEP) pockets in a series as a flow-through belt for large-capacitance applications (998 L m^-2 at a flow rate of 417 L m^-2 h^-1 for a four-pockets belt), as indicated by the degradation of azo dyes, antibiotics, pesticides, and pathogens. This study may inspire a new tailorable catalyst design for a promising point-of-use purification device.

Nanoporous Stainless Steel Materials for Body Implants-Review of Synthesizing Procedures

Despite the inadequate biocompatibility, medical-grade stainless steel materials have been used as body implants for decades. The desired biological response of surfaces to specific applications in the body is a highly challenging task, and usually not all the requirements of a biomaterial can be achieved. In recent years, nanostructured surfaces have shown intriguing results as cell selectivity can be achieved by specific surface nanofeatures. Nanoporous structures can be fabricated by anodic oxidation, which has been widely studied for titanium and its alloys, while no systematic studies are so far available for stainless steel (SS) materials. This paper reviews the current state of the art in the anodisation of SS; correlations between the parameters of anodic oxidation and the surface morphology are drawn. The results reported by various authors are scattered because of a variety of experimental configurations. A linear correlation between the pores' diameter anodisation voltage was deduced, while no correlation with other processing parameters was found obvious. The analyses of available data indicated a lack of systematic experiments, which are recommended to understand the kinetics of pore formation and develop techniques for optimal biocompatibility of stainless steel.

Photocatalysis engineered hydrophilic reactors on hydrophobic paper for the visual and colorimetric assay of alkaline phosphatase activity

Taking advantage of the intrinsic photocatalysis of TiO₂, hydrophilic reactor arrays were lithographically patterned on a hydrophobic paper via a simple UV irradiation. As a proof-of-concept, alkaline phosphatase (ALP) was used as the model analyte for colorimetric analysis. As ALP can induce hydrolysis of pyrophosphate-Zn(II) framework, the released Zn²⁺ ions are subsequently coordinated with red-colored zincon to form blue-colored zincon-Zn(II) chelate complex, and these color differences were applied for further colorimetric assay. The sensing platform showed response to ALP ranging from 20 ~ 800 U L^-1 with a detection limit of 3 U L^-1, and the recoveries of ALP in serum samples were in the range 95.7 ~ 104.5% with relative standard deviations from 2.10 to 3.84%. Additionally, the distinct wettability features of the proposed sensing platform effectively prevent lateral fluid spread out of hydrophilic reactors, thus allowing not only the use of minimum amount of analyte but it has also a high potential for simultaneous quantification of multiple samples.

Fluoride-free synthesis of anodic TiO2 nanotube layers: a promising environmentally friendly method for efficient photocatalysts

TiO₂ nanotube (TNT) layers are generally prepared in fluoride-based electrolytes via electrochemical anodization that relies on the field-assisted dissolution of Ti metal forming nanoporous/nanotubular structures. However, the usage of fluoride ions is considered hazardous to the environment. Therefore, we present an environmentally friendly synthesis and application of TNT layers prepared in fluoride-free nitrate-based electrolytes. A well-defined nanotubular structure with thickness up to 1.5 μm and an inner tube diameter of ∼55 nm was obtained within 5 min using aqueous X(NO₃)_Y electrolytes (X = Na⁺, K⁺, Sr²⁺, Ag⁺). For the first time, we show the photocatalytic performance (using a model organic pollutant), HO˙ radical production, and thorough characterization of TNT layers prepared in such electrolytes. The highest degradation efficiency (k = 0.0113 min^-1) and HO˙ radical production rate were obtained using TNT layers prepared in AgNO₃ (Ag-NT). The intrinsic properties of Ag-NT such as the valence band maximum of ∼2.9 eV, surface roughness of ∼6 nm, and suitable morphological features and crystal structure were obtained. These results have the potential to pave the way for a more environmentally friendly synthesis of anodic TNT layers in the future using the next generation of fluoride-free nitrate-based electrolytes.

Single-Atom-Based Catalysts for Photocatalytic Water Splitting on TiO2 Nanostructures

H2 generation from photocatalytic water splitting is one of the most promising approaches to producing cost-effective and sustainable fuel. Nanostructured TiO2 is a highly stable and efficient semiconductor photocatalyst for this purpose. The main drawback of TiO2 as a photocatalyst is the sluggish charge transfer on the surface of TiO2 that can be tackled to a great extent by the use of platinum group materials (PGM) as co-catalysts. However, the scarcity and high cost of the PGMs is one of the issues that prevent the widespread use of TiO2/PGM systems for photocatalytic H2 generation. Single-atom catalysts which are currently the frontline in the catalysis field can be a favorable path to overcome the scarcity and further advance the use of noble metals. More importantly, single-atom (SA) catalysts simultaneously have the advantage of homogenous and heterogeneous catalysts. This mini-review specifically focuses on the single atom decoration of TiO2 nanostructures for photocatalytic water splitting. The latest progress in fabrication, characterization, and application of single-atoms in photocatalytic H2 generation on TiO2 is reviewed.

Recent Advances in TiO2-based Photoanodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting has attracted a great attention in the past several decades which holds great promise to address global energy and environmental issues by converting solar energy into hydrogen. However, its low solar-to-hydrogen (STH) conversion efficiency remains a bottleneck for practical application. Developing efficient photoelectrocatalysts with high stability and high STH conversion efficiency is one of the key challenges. As a typical n-type semiconductor, titanium dioxide (TiO 2 ) exhibits high PEC water splitting performance, especially high chemical and photo stability. But, TiO 2 has also disadvantages such as wide band gap and fast electron-hole recombination rate, which seriously hinder its PEC performance. This review focuses on recent development in TiO 2 -based photoanodes as well as some key fundamentals. The corresponding mechanisms and key factors for high STH, and controllable synthesis and modification strategies are highlighted in this review. We conclude finally with an outlook providing a critical perspective on future trends on TiO 2 -based photoanodes for PEC water splitting.

Synthesis of Uniform Size Rutile TiO2 Microrods by Simple Molten-Salt Method and Its Photoluminescence Activity

Uniform-size rutile TiO₂ microrods were synthesized by simple molten-salt method with sodium chloride as reacting medium and different kinds of sodium phosphate salts as growth control additives to control the one-dimensional (1-D) crystal growth of particles. The effect of rutile and anatase ratios as a precursor was monitored for rod growth formation. Apart from uniform rod growth study, optical properties of rutile microrods were observed by UV−visible and photoluminescence (PL) spectroscopy. TiO₂ materials with anatase and rutile phase show PL emission due to self-trapped exciton. It has been observed that synthesized rutile TiO₂ rods show various PL emission peaks in the range of 400 to 900 nm for 355 nm excitation wavelengths. All PL emission appeared due to the oxygen vacancy present inside rutile TiO₂ rods. The observed PL near the IR range (785 and 825 nm) was due to the formation of a self-trapped hole near to the surface of (110) which is the preferred orientation plane of synthesized rutile TiO₂ microrods.

Photocatalytic Carbon Dioxide Conversion by Structurally and Materially Modified Titanium Dioxide Nanostructures

TiO₂ has aroused considerable attentions as a promising photocatalytic material for decades due to its superior material properties in several fields such as energy and environment. However, the main dilemmas are its wide bandgap (3–3.2 eV), that restricts the light absorption in limited light wavelength region, and the comparatively high charge carrier recombination rate of TiO₂, is a hurdle for efficient photocatalytic CO₂ conversion. To tackle these problems, lots of researches have been implemented relating to structural and material modification to improve their material, optical, and electrical properties for more efficient photocatalytic CO₂ conversion. Recent studies illustrate that crystal facet engineering could broaden the performance of the photocatalysts. As same as for nanostructures which have advantages such as improved light absorption, high surface area, directional charge transport, and efficient charge separation. Moreover, strategies such as doping, junction formation, and hydrogenation have resulted in a promoted photocatalytic performance. Such strategies can markedly change the electronic structure that lies behind the enhancement of the solar spectrum harnessing. In this review, we summarize the works that have been carried out for the enhancement of photocatalytic CO₂ conversion by material and structural modification of TiO₂ and TiO₂-based photocatalytic system. Moreover, we discuss several strategies for synthesis and design of TiO₂ photocatalysts for efficient CO₂ conversion by nanostructure, structure design of photocatalysts, and material modification.

A Review of Anodized TiNbSn Alloys for Improvement in Layer Quality and Application to Orthopedic Implants

Titanium alloys are useful for application in orthopedic implants. However, complications, such as prosthetic infections and aseptic loosening, often occur after orthopedic devices are implanted. Therefore, innovation in surface modification techniques is essential to develop orthopedic materials with optimal properties at the biomaterial–bone interface. In this review, we present recent research on the improvement in the osteoconductivity and antibacterial effect of the Ti-33.6% Nb-4% Sn (TiNbSn) alloy by anodic oxidation and other related studies. TiNbSn alloys are excellent new titanium alloys with a low Young’s modulus, high tensile strength, and with gradient functional properties such as a thermally adjustable Young’s modulus and strength. Titanium dioxide (TiO₂), when obtained by the anodic oxidation of a TiNbSn alloy, improves bone affinity and provides antibacterial performance owing to its photocatalytic activity. The safety of TiO₂ and its strong bonding with metal materials make its method of preparation a promising alternative to conventional methods for improving the surface quality of orthopedic implants. Implementing anodization technology for TiNbSn alloys may alleviate orthopedic surgery-related complications, such as loosening, stress shielding, and infection after arthroplasty.

Porous vs. Nanotubular Anodic TiO2: Does the Morphology Really Matters for the Photodegradation of Caffeine?

Herein, the preparation of nanotubular and porous TiO2 structures (TNS) is presented for photocatalytic applications. Different TNS were prepared in three different types of glycerol- and ethylene glycol-based electrolytes on a large area (approx. 20 cm2) via anodization using different conditions (applied potential, fluoride concentration). Morphology, structure, and optical properties of TNS were characterized by Scanning Electron Microscopy (SEM), X-ray Diffractometry (XRD), and Diffuse Reflectance Spectroscopy (DRS), respectively. All TNS possess optical band-gap energy (EBG) in the range from 3.1 eV to 3.2 eV. Photocatalytic degradation of caffeine was conducted to evaluate the efficiency of TNS. Overall, nanotubular TiO2 possessed enhanced degradation efficiencies (up to 50% degradation) compared to those of porous TiO2 (up to 30% degradation). This is due to the unique properties of nanotubular TiO2, e.g., improved incident light utilization. As the anodization of large areas is, nowadays, becoming a trend, we show that both nanotubular and porous TiO2 are promising for their use in photocatalysis and could be potentially applicable in photoreactors for wastewater treatment. We believe this present work can be the foundation for future development of efficient TiO2 nanostructures for industrial applications.

Recent Progress on Photoelectrochemical Water Splitting of Graphitic Carbon Nitride (g−CN) Electrodes

Graphitic carbon nitride (g−CN), a promising visible-light-responsive semiconductor material, is regarded as a fascinating photocatalyst and heterogeneous catalyst for various reactions due to its non-toxicity, high thermal durability and chemical durability, and “earth-abundant” nature. However, practical applications of g−CN in photoelectrochemical (PEC) and photoelectronic devices are still in the early stages of development due to the difficulties in fabricating high-quality g−CN layers on substrates, wide band gaps, high charge-recombination rates, and low electronic conductivity. Various fabrication and modification strategies of g−CN-based films have been reported. This review summarizes the latest progress related to the growth and modification of high-quality g−CN-based films. Furthermore, (1) the classification of synthetic pathways for the preparation of g−CN films, (2) functionalization of g−CN films at an atomic level (elemental doping) and molecular level (copolymerization), (3) modification of g−CN films with a co-catalyst, and (4) composite films fabricating, will be discussed in detail. Last but not least, this review will conclude with a summary and some invigorating viewpoints on the key challenges and future developments.

Nanomaterials in Bone Regeneration

Nanomaterials are promising in the development of innovative therapeutic options that include tissue and organ replacement, as well as bone repair and regeneration. The expansion of new nanoscaled biomaterials is based on progress in the field of nanotechnologies, material sciences, and biomedicine. In recent decades, nanomaterial systems have bridged the line between the synthetic and natural worlds, leading to the emergence of a new science called nanomaterial design for biological applications. Nanomaterials replicating bone properties and providing unique functions help in bone tissue engineering. This review article is focused on nanomaterials utilized in or being explored for the purpose of bone repair and regeneration. After a brief overview of bone biology, including a description of bone cells, matrix, and development, nanostructured materials and different types of nanoparticles are discussed in detail.

Peroxymonosulfate activation by black TiO2 nanotube arrays under solar light: Switching the activation mechanism and enhancing catalytic activity and stability

Black TiO₂ nanotube arrays (black TNAs) suffer from the low activity and deactivation for peroxymonosulfate (PMS) activation, which limit their application in the oxidative destruction of organic pollutants in water. Here, we report an efficient, environmentally benign, and cost-effective method to enhance the catalytic activity and prevent the deactivation of black TNAs in PMS activation by utilizing solar energy. Optical absorption and electrochemical analysis and density functional theory calculations demonstrated that abundant oxygen vacancies (estimated to be 26%) on the black TNAs surface markedly improved solar light absorption and electrical conductivity and played a critical role as a catalytic active site for PMS activation. As a result, the solar light-irradiated black TNAs/PMS system exhibited the higher phenol degradation rate (k = 0.0488 min^-1) and total organic carbon (TOC) removal efficiency (~70%) compared to other TNAs systems. These results were ascribed to the switching of the reaction mechanism from non-radical mechanism to radical-involved. Black TNAs oxidized organic pollutants by mediating electron transfer from organics to PMS in the dark (i.e., a non-radical pathway). On the other hand, PMS activation under solar light irradiation involved the production of highly reactive sulfate and hydroxyl radicals (i.e., radical pathway), markedly improving the degradation and mineralization of organics. Additionally, the solar light-irradiated black TNAs showed relative pH-independence for PMS activation and durable catalytic performance without the loss of activity during the repetitive reaction cycles.