Effects of solution chemistry on adsorption of selected pharmaceuticals and personal care products (PPCPs) by graphenes and carbon nanotubes

A robust self-regenerating graphene-based adsorbent for pharmaceutical removal in various water environments

The presence of active pharmaceutical ingredients (APIs) in wastewater effluents and natural aquatic systems threatens ecological and human health. While activated carbon-based adsorbents, such as GAC and PAC, are widely used for API removal, they exhibit certain deficiencies, including reduced performance due to the presence of natural organic macromolecules (NOMs) and high regeneration costs. There is growing demand for a robust, stable, and self-regenerative adsorbent designed for API removal in various environments. In this study, we synthesized a self-generating metal oxide nano-composite (S-MGC) containing titanium dioxide (TiO2) and silicon dioxide (SiO2) combined with 3D graphene oxide (GO) to adsorb APIs and undergo regeneration via light illumination. We determined optimal TiO2:SiO2:GO compositions for the S-MGCs through experiments using a model contaminant, methylene blue. The physical and chemical properties of S-MGCs were characterized, and their adsorption and photodegradation capabilities were studied using five model APIs, including sulfamethoxazole, carbamazepine, ketoprofen, valsartan, and diclofenac, both in single-component and multi-component mixtures. In the absence of TiO2/SiO2, 3D graphene oxide (CGB) displayed better adsorption performance compared to GAC, and S-MGCs further improve CGB's adsorption capacity. This performance remained consistent in two complex water environments: aqueous solutions at varying NOM levels and artificial urine. TiO2 supported on the GO surface exhibits similar photocatalytic activity to suspended TiO2. In a continuous fixed-bed column test, S-MGCs demonstrated robust API adsorption performance that is maintained in the presence of NOM or urine, and can be regenerated through multiple cycles of adsorption and light illumination.

Noteworthy synthesis strategies and applications of metal-organic frameworks for the removal of emerging water pollutants from aqueous environment

17 global Sustainable Development Goals (SDGs) were established through the adoption of the 2030 Agenda for Sustainable Development by all United Nations members. Clean water and sanitation (SDG 6) and industry, innovation, and infrastructure (SDG 9) are the SDGs focus of this work. Of late, various new companies delivering metal-organic frameworks (MOFs) have blossomed and moved the field of adsorption utilizing MOFs to another stage. Inside this unique circumstance, this article aims to catch recent advancements in the field of MOFs and the utilizations of MOFs relate to the expulsion of arising contaminations that present huge difficulties to water quality because of their steadiness and possible damage to environments and human wellbeing. Customary water treatment techniques regularly neglect to eliminate these poisons, requiring the advancement of novel methodologies. This study overviews engineering techniques for controlling MOF characteristics for better flexibility, stability, and surface area. A current report on MOFs gathered new perspectives that are amicably discussed in emergent technologies and extreme applications towards environmental sectors. Various applications in many fields that exploit MOFs are being fostered, including gas storage, fluid separation, adsorbents, catalysis, medication delivery, and sensor utilizations. The surface area of a wide range of MOFs ranges from 103 to 104 m2/g, which exceeds the standard permeability of several material designs. MOFs with extremely durable porosity are more significant in their assortment and variety than other classes of porous materials. The work outlines the difficulties encountered in the synthesis steps and suggests ways to make use of MOFs' value in a variety of contexts. This caters to creating multivariate systems enclosed with numerous functionalities, leading to the synthesis of MOFs that offer a synergistic blend of in-built properties and exclusive applications. Additionally, the MOF-related future development opportunities and challenges are discussed.

Unveiling combined ecotoxicity: Interactions and impacts of engineered nanoparticles and PPCPs

Emerging contaminants such as engineered nanoparticles (ENPs), pharmaceuticals and personal care products (PPCPs) are of great concern because of their wide distribution and incomplete removal in conventional wastewater and soil treatment processes. The production and usage of ENPs and PPCPs inevitably result in their coexistence in different environmental media, thus posing various risks to organisms in aquatic and terrestrial ecosystems. However, the existing literature on the physicochemical interactions between ENPs and PPCPs and their effects on organisms is rather limited. Therefore, this paper summarized the ecotoxicity of combined ENPs and PPCPs by discussing: (1) the interactions between ENPs and PPCPs, including processes such as aggregation, adsorption, transformation, and desorption, considering the influence of environmental factors like pH, ionic strength, dissolved organic matter, and temperature; (2) the effects of these interactions on bioaccumulation, bioavailability and biotoxicity in organisms at different trophic levels; (3) the impacted of ENPs and PPCPs on cellular-level biological process. This review elucidated the potential ecological hazards associated with the interaction of ENPs and PPCPs, and serves as a foundation for future investigations into the ecotoxicity and mode of action of ENPs, PPCPs, and their co-occurring metabolites.

Can Microplastics Accumulate Toxic dye in Water? An adsorption-desorption Study under Different Experimental Conditions

The adsorption/desorption of Rhodamine B (RhB) on Polystyrene (PS), polypropylene (PP), and polyvinyl chloride (PVC) microplastics (MPs) was investigated in this study. The results showed that RhB adsorption on the selected MPs was fast. The adsorption coefficients (Kd) of RhB were 2036 ± 129, 1557 ± 91, and 63 ± 8.5 L kg- 1 for PS, PP, and PVC, respectively. RhB adsorption on PS and PP increased with increasing temperature and decreasing ionic strength, whereas RhB adsorption on PVC showed a completely opposite trend. The binding strength of RhB on the three types of MPs was weak as demonstrated by the high total desorption percentage, which ranged from 79.59 ~ 89.39%. This study shows that PP and PS MPs can accumulate RhB in the aquatic environment and their potential combined toxic risks should be taken seriously.

Sustainable development and analysis of a novel bio-derived (biochar) nanocomposite for the remediation of carbamazepine from aqueous solution

The presence of pharmaceutical compounds in aqueous environments has become a growing concern due to their potential adverse effects on ecosystems and human health. In this work, synthesis of a novel bio based nanocomposite using a biowaste, palm seed is employed for the preparation of biochar. The bio derived nanocomposite consist of polypyrrole (Ppy), graphene oxide (GO), and biochar, is employed for the Carbamazepine (CBZ) removal. The synthesized nanocomposite, Ppy-GO-Biochar, is characterized using various analytical techniques. The characterization results confirmed the successful synthesis of the Ppy-GO-Biochar nanocomposite with the desired morphology and structural properties. The effect of variables is investigated and the optimum conditions are found as: pH (7.8), adsorbent dosage (1.4 g/L), agitation speed (200 rpm) and temperature (39.5 °C). The results demonstrated that a removal efficiency of over 97.74% and uptake of 45.045 mg/g is achieved for CBZ. Furthermore, the CBZ removal followed pseudo-second-order, indicating chemisorption as the predominant mechanism. The CBZ sorption equilibrium is well represented by Langmuir and Freundlich isotherm. Thermodynamic results show that CBZ sorption is endothermic and spontaneous. Mechanism of CBZ sorption using the synthesized nanocomposite follows π-π interaction and electrostatic attraction. Molecular docking studies were also performed for the sorption of CBZ.

Exploration of porous imine-based covalent organic framework for solid-phase extraction of five trace sulfonamides in food samples

In this article, a highly crystalline porous imine-based covalent organic framework was synthesized at room temperature and used as solid-phase extraction (SPE) adsorbent for the purification and enrichment of trace sulfonamides (SAs) from food samples. The structure of the obtained material was characterized and studied in detail. The extraction process was optimized and the final elution was determined by the ultra-high-performance liquid chromatography-quadrupole time of flight mass spectrometry method. Low limits of detection (0.02-0.19 μg/kg) were obtained under optimal conditions, with the recoveries ranging from 70.5% to 105.3% when spiked at different levels. The adsorption process of the material for SAs was fitted by the Langmuir and Freundlich adsorption isotherm model, and the extraction capacity for Nitrofuran metabolites from food samples was also investigated for comparison. The results demonstrated that the framework was a good candidate SPE adsorbent that can be used for the enrichment of drug residues in complex matrix, and the work may provide a systematic study method for the development of porous adsorbents.

Application of 2D MoS2 Nanoflower for the Removal of Emerging Pollutants from Water

Two-dimensional (2D) nanomaterial-MoS2 (molybdenum disulfide) has gained interest among researchers, owing to its exceptional mechanical, biological, and physiochemical properties. This paper reports on the removal of organic dyes and an emerging contaminant, Ciprofloxacin, by a 2D MoS2 nanoflower as an adsorbent. The material was prepared by a green hydrothermal technique, and its high Brunauer-Emmett-Teller-specific area of 185.541m2/g contributed to the removal of 96% rhodamine-B dye and 85% Ciprofloxacin. Various characterizations, such as X-ray diffraction, scanning electron microscopy linked with energy-dispersive spectroscopy, and transmission electron microscopy, revealed the nanoflower structure with good crystallinity. The feasibility and efficacy of 2D MoS2 nanoflower as a promising adsorbent candidate for the removal of emerging pollutants was confirmed in-depth in batch investigations, such as the effects of adsorption time, MoS2 dosages, solution pH, and temperature. The adsorption mechanism was further investigated based on thermodynamic calculations, adsorption kinetics, and isotherm modeling. The results confirmed the exothermic nature of the enthalpy-driven adsorption as well as the fast kinetics and physisorption-controlled adsorption process. The recyclability potential of 2D MoS2 exceeds four regeneration recycles. MoS2 nanoflower has been shown to be an effective organic pollutant removal adsorbent in water treatment.

Fluorescent dual-mode sensor for the determination of graphene oxide and catechin in environmental or food field

The novel fluorescent sensor is proposed in this work based on the competitive interactions between the known bioactive compounds, riboflavin and catechin, which act as guests, and graphene oxide (GO) material that acts as host. Specifically, this proposal is based on an indicator displacement assay which allows the detection of GO and catechin (fluorescence quenching of riboflavin signal by GO and increase in fluorescence by catechin on the GO-riboflavin system). Three GO structures with different lateral dimensions and thickness were synthesized and tested, being able to be the three differentiated depending on the attenuation capacity of the fluorescent signal that each one possesses. The environmental analytical control of GO is more and more important, being this method sensitive and selective in the presence of other potential interferent substances. On the other hand, the other sensing capacity of the sensor also allows the determination of catechin in food samples based on the formation of riboflavin-GO complex. It is a rapid, simple and non-expensive procedure. Thus, the same 2D nanomaterial (GO) is seen to play a double role in this sensing strategy (analyte and analytical tool for the determination of another compound).

Effective immobilization of bisphenol A utilizing activated biochar incorporated into soil: combined with batch adsorption and fixed-bed column studies

This study presented the mixture of biochar and soil for removal of bisphenol A (BPA) to assess environmental remediation ability. Using phoenix tree leaves as biomass and phosphoric acid as activator, after one-step hydrothermal and short-term activation, the eventual solid product was phosphoric acid hydrothermal activated carbon (HPC). The characterizations showed that HPC had the high specific surface (994.21 m2·g-1), and large unsaturated esters and hydroxyl groups. The saturated adsorption capacities of batch and column adsorption for the addition of 0.5% HPC to soil were 0.790 mg·g-1 and 67.23 mg·kg-1, while to the natural soil were 0.236 mg·g-1 and 8.75 mg·kg-1, respectively. The adsorption kinetics and thermodynamic analysis indicated that the adsorption process utilizing HPC incorporated into soil was a chemical reaction rate-controlled, physical-dominated multilayer adsorption, and spontaneous endothermic. Also, batch adsorption experiments and analysis were performed under different pH levels, HPC contents, organic acid concentrations, and cationic strengths. Successively, fixed-bed column experiments were carried out with and without the HPC; the results showed that the wide mass transfer zone led to the effective fixation of BPA, and the organic acid had no obvious effect on the fixation of BPA when the 1.0% HPC mixed with soil. Finally, through characterizations and data analysis, the enhanced adsorption of BPA by HPC mixed with soil mainly relied on π-π interaction, hydrogen bonding, followed by electrostatic attraction and pore filling.

Effect of molecular structure on the adsorption behavior of sulfanilamide antibiotics on crumpled graphene balls

Since the 1930s, sulfonamide(SA)-based antibiotics have served as important pharmaceuticals, but their widespread detection in water systems threatens aquatic organisms and human health. Adsorption via graphene, its modified form (graphene oxide, GO), and related nanocomposites is a promising method to remove SAs, owing to the strong and selective surface affinity of graphene/GO with aromatic compounds. However, a deeper understanding of the mechanisms of interaction between the chemical structure of SAs and the GO surface is required to predict the performance of GO-based nanostructured materials to adsorb the individual chemicals making up this large class of pharmaceuticals. In this research, we studied the adsorptive performance of 3D crumpled graphene balls (CGBs) to remove 10 SAs and 13 structural analogs from water. The maximum adsorption capacity qm of SAs on CGB increased with the number of (1) aromatic rings; (2) electron-donating functional groups; (3) hydrogen bonding acceptor sites. Furthermore, the CGB surface displayed a preference for homocyclic relative to heterocyclic aromatic structures. A leading mechanism, π-π electron-donor-acceptor interaction, combined with hydrogen bonding, explains these trends. We developed a multiple linear regression model capable of predicting the qm as a function of SA chemical structure and properties and the oxidation level of CGB. The model predicted the adsorptive behaviors of SAs well with the exception of a chlorinated/fluorinated SA. The insights afforded by these experiments and modeling will aid in tailoring graphene-based adsorbents to remove micropollutants from water and reduce the growing public health threats associated with antibiotic resistance and endocrine-disrupting chemicals.

Simultaneous removal of pharmaceuticals and heavy metals from aqueous phase via adsorptive strategy: A critical review

The coexistence of pharmaceuticals and heavy metals is regarded as a serious threat to aquatic environments. Adsorbents have been widely applied to the simultaneous removal of pharmaceuticals and metals from aqueous phase. Through a comprehensive review, behaviors that promote, inhibit, or have no effect on simultaneous adsorption of pharmaceuticals and heavy metals were found to depend on the system of contaminants and adsorbents and their environmental conditions, such as: characteristics of adsorbent and pollutant, temperature, pH, inorganic ions, and natural organic matter. Bridging and competition effects are the main reasons for promoting and inhibiting adsorption in coexisting systems, respectively. The promotion is more significant in neutral or alkaline conditions. After simultaneous adsorption, a solvent elution approach was most commonly used for regeneration of saturated adsorbents. To conclude, this work could help to sort out the theoretical knowledge in this field, and may provide new insights into the prevention and control of pharmaceuticals and heavy metals coexisting in wastewater.

Nanotechnology as an efficient and effective alternative for wastewater treatment: an overview

The increase in the surface and groundwater contamination due to global population growth, industrialization, proliferation of pathogens, emerging pollutants, heavy metals, and scarcity of drinking water represents a critical problem. Because of this problem, particular emphasis will be placed on wastewater recycling. Conventional wastewater treatment methods may be limited due to high investment costs or, in some cases, poor treatment efficiency. To address these issues, it is necessary to continuously evaluate novel technologies that complement and improve these traditional wastewater treatment processes. In this regard, technologies based on nanomaterials are also being studied. These technologies improve wastewater management and constitute one of the main focuses of nanotechnology. The following review describes wastewater's primary biological, organic, and inorganic contaminants. Subsequently, it focuses on the potential of different nanomaterials (metal oxides, carbon-based nanomaterials, cellulose-based nanomaterials), membrane, and nanobioremediation processes for wastewater treatment. The above is evident from the review of various publications. However, nanomaterials' cost, toxicity, and biodegradability need to be addressed before their commercial distribution and scale-up. The development of nanomaterials and nanoproducts must be sustainable and safe throughout the nanoproduct life cycle to meet the requirements of the circular economy.

Removal of pristine and aged microplastics from water by magnetic biochar: Adsorption and magnetization

Adsorption is an efficient and eco-friendly removal technique for small pristine microplastics in water. However, small pristine microplastics are not representative of those large microplastics in natural water with different aging levels. Whether the adsorption technique is effective in removing large aged microplastics from water remained unknown. To this end, the removal efficiency of large polyamide (PA) microplastics with different aging time by magnetic corncob biochar (MCCBC) was evaluated under different experimental conditions. After treated by heated-activated potassium persulfate, the physicochemical properties of PA have changed dramatically, as evidenced by rough surface, decreased particle size and crystallinity, and increased oxygen-containing functional groups, which enhanced with aging time. These changes promoted the combination of aged PA and MCCBC, thereby resulting in a higher removal efficiency of aged PA (~97 %) than that of pristine ones (~25 %). It is supposed that the adsorption process was a result of complexation, hydrophobic interaction, and electrostatic interaction. Increased ionic strength inhibited the removal of both pristine and aged PA, and neutral pH conditions favored PA removal. Furthermore, particle size played a great role in the removal of aged PA microplastics. When the particle size of aged PA was smaller than 75 μm, their removal efficiency was significantly increased (p < 0.01). The small PA microplastics were removed by adsorption, whereas the large ones were removed by magnetization. These research findings highlight magnetic biochar as promising technique for removing environmental microplastics.

Aged polyamide microplastics enhance the adsorption of trimethoprim in soil environments

Microplastics (MPs) in the environment typically age. However, the influence of aged MPs on the adsorption of antibiotics in soil remains unknown. In this study, the adsorption behavior of trimethoprim (TMP) on soil and soil containing aged polyamide (PA) was investigated using batch and stirred flow chamber experiments. The adsorption of TMP on the tested soil with and without PA was fast, with the k_a values ranging from 50.5 to 55.6 L (mg min)^-1. The adsorption of TMP on aged PA was more than 20 times larger than that on the tested soil, which resulted in an "enrichment effect." Furthermore, aged PA altered the pH of the reaction system, thereby enhancing the adsorption of TMP. Consequently, the K_d values of TMP for soil, soil containing 5%, and 10% aged PA were 5.64, 12.38, and 23.65 L kg^-1, respectively. The effect of aged PA on the adsorption of TMP on soil depended on pH values. However, TMP adsorption on soil containing 10% aged PA was constantly higher (p < 0.01) than that on soil with NaCl concentrations ranging from 0 to 50 mmol L^-1. These findings provide new insights into the effect of environmental MPs on the fate and transport of antibiotics in soil environments.

Adsorption of highly toxic chlorophenylacetonitriles on typical microplastics in aqueous solutions: Kinetics, isotherm, impact factors and mechanism

Microplastics (MPs) widely exist in all kinds of water bodies. The physical and chemical properties of MPs make them easy to become the carrier of pollutants, but the interaction between disinfection by-products (DBPs) and MPs has not been studied yet. In this study, the occurrence of emerging high-toxic chlorophenylacetonitriles (CPANs) in wastewater treatment plant (WWTP) effluents was determined. CPANs ubiquitously existed in WWTP effluents, and the concentration ranged from 88 ± 5 ng/L to 219 ± 16 ng/L. The typical MPs (i.e., polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS)) were selected to study their adsorption of CPANs. Adsorption kinetics and isotherm analysis were carried out. The maximum Langmuir adsorption capacities were 8.602 ± 0.849 to 9.833 ± 0.946 μg/g for PE, 13.340 ± 1.055 to 29.405 ± 5.233 μg/g for PET, and 20.537 ± 1.649 to 43.597 ± 1.871 for PS. Dichloro-CPANs had higher adsorption capacity than monochloro-CPANs. After that, the specific surface area, contact angle, FTIR spectrum, crystallinity, and glass transition temperature (Tg) of MPs were measured. Based on the analysis of the properties of both MPs and CPANs, the mechanism of adsorption was studied. The adsorption of CPANs on PE was mainly affected by pore-filling and van der Waals force. In addition to these two factors, the adsorption of PET was also affected by hydrophobic interaction. Due to the substituents on the benzene ring, there was π-π interaction between PS and CPANs, which might be the reason why PS had the highest adsorption capacity for CPANs. Finally, the effects of pH and dissolved organic matter were studied, and their effects were relatively limited. The results indicated that MPs may adsorb CPANs in actual WWTP effluents, and special attention should be paid to the possible impacts on the aquatic environment caused by the transfer of CPANs on MPs.

Comparative study on effects of pH, electrolytes, and humic acid on the stability of acetic and polyacrylic acid coated magnetite nanoparticles

The poor colloidal stability of magnetite nanoparticles (MNPs) limits their mobility and application, so various organic coatings (OCs) were applied to MNPs. Here, a comparative study on the colloidal stability of MNPs coated with acetic (HAc) and polyacrylic acids (PAA) was conducted under varied pH (5.0-9.0) in the presence of different concentrations of cations and anions, as well as humic acid (HA). Comparing the effects of various cations and anions, the stability of both HAc/PAA-MNPs followed the order: Na⁺ > Ca²⁺and PO₄^3- > SO₄^2- > Cl^-, which could be explained by their adsorption behaviors onto HAc/PAA-MNPs and the resulting surface charge changes. Under all conditions even with more anion adsorption onto HAc-MNPs (0.14-22.56 mg/g) than onto PAA-MNPs (0.04-18.34 mg/g), PAA-MNPs were more negatively charged than HAc-MNPs, as PAA has a lower pH_IEP (2.6 ± 0.1) than that of HAc (3.7 ± 0.1). Neither the HAc nor PAA coatings were displaced by phosphate even at considerably high phosphate concentration. Compared with HAc-MNPs, the stability of PAA-MNPs was greatly improved under all studied conditions, which could be due to both stronger electrostatic and additional steric repulsion forces among PAA-MNPs. Besides, under all conditions, Derjaguin-Landau-Verwey-Overbeek (DLVO) explained well the aggregation kinetic of HAc-MNPs; while extended DLVO (EDLVO) successfully predict that of PAA-MNPs, indicating steric forces among PAA-MNPs. The aggregation of HAc/PAA-MNPs was all inhibited in varied electrolyte solutions by HA (2 mg C/L) addition. This study suggested that carboxyl coatings with higher molecular weights and pK_a values could stabilize MNPs better due to stronger electrostatic and additional steric repulsion. However, in the presence of HA, these two forces were mainly controlled by adsorbed HA instead of the organic pre-coatings on MNPs.

Recent developments in microplastic contaminated water treatment: Progress and prospects of carbon-based two-dimensional materials for membranes separation

Micro (nano)plastics pollution is a noxious menace not only for mankind but also for marine life, as removing microplastics (MPs) is challenging due to their physiochemical properties, composition, and response toward salinity and pH. This review provides a detailed assessment of the MPs pollution in different water types, environmental implications, and corresponding treatment strategies. With the advancement in nanotechnology, mitigation strategies for aqueous pollution are seen, especially due to the fabrication of nanosheets/membranes mostly utilized as a filtration process. Two-dimensional (2D) materials are increasingly used for membranes due to their diverse structure, affinity, cost-effectiveness, and, most importantly, removal efficiency. The popular 2D materials used for membrane-based organic and inorganic pollutants from water mainly include graphene and MXenes however their effectiveness for MPs removal is still in its infancy. Albeit, the available literature asserts a 70- 99% success rate in micro/nano plastics removal achieved through membranes fabricated via graphene oxide (GO), reduced graphene oxide (rGO) and MXene membranes. This review examined existing membrane separation strategies for MPs removal, focusing on the structural properties of 2D materials, composite, and how they adsorb pollutants and underlying physicochemical mechanisms. Since MPs and other contaminants commonly coexist in the natural environment, a brief examination of the response of 2D membranes to MPs removal was also conducted. In addition, the influencing factors regulate MPs removal performance of membranes by impacting their two main operating routes (filtration and adsorption). Finally, significant limitations, research gaps, and future prospects of 2D material-based membranes for effectively removing MPs are also proposed. The conclusion is that the success of 2D material is strongly linked to the types, size of MPs, and characteristics of aqueous media. Future perspectives talk about the problems that need to be solved to get 2D material-based membranes out of the lab and onto the market.

Granular limestone amended sand filters for enhanced removal of nanoplastics from water: Performance and mechanisms

Effluent from wastewater treatment plants (WWTPs) has been regarded as one of the major contributors of nanoplastics (NPs) in the environment. Improving the performance of rapid sand filter (RSF) systems in WWTPs is thus in urgent need. In this study, granular limestone, a low-cost and abundant natural material, was integrated into RSF systems to enhance NP removal from water. Laboratory filtration columns packed with pure sand and limestone-amended sand were applied to remove polystyrene nanospheres (100 nm) from deionized water (DIW) and artificial wastewater (AWW) under different grain size and flow velocity conditions. Pure sand filter showed neglectable NP removal from DIW but much higher NP removal from AWW, especially when fine sand was employed. Limestone amended RSF had a significant improvement in the removal of NPs for all the tested conditions and the removal efficiency of NPs became greater with increasing amount of limestone in columns. The sensitivity of NP immobilization to flow velocity changed significantly with different combinations of filter and background solutions. Coupled effects of physical straining, electrostatic interaction, cation screening and bridging, and surface roughness controlled the retention behaviors of NPs in the columns. The higher removal efficiency of NPs by limestone can be mainly attributed to its chemical composition as well as its surface heterogeneity and roughness. Results of this study demonstrate that limestone can offer extensive application potential for enhancing the performance of RSF systems in WWTPs to remove NPs from wastewater.

Appraising efficacy of existing and advanced technologies for the remediation of beta-blockers from wastewater: A review

The discharge of emerging pollutants, such as beta-blockers (BB), has been recognized as one of the major threats to the environment due to the ecotoxicity associated with these emerging pollutants. The BB are prescribed to treat high blood pressure and cardiovascular diseases; however, even at lower concentration, these pollutants can pose eco-toxic impacts towards aquatic organisms. Additionally, owing to their recalcitrant nature, BB are not effectively removed through conventional technologies, such as activated sludge process, trickling filter and moving bed bioreactor; thus, it is essential to understand the degradation mechanism of BB in established as well as embryonic technologies, like adsorption, electro-oxidation, Fenton process, ultraviolet-based advance oxidation process, ozonation, membrane systems, wetlands and algal treatment. In this regard, this review articulates the recalcitrant nature of BB and their associated removal technologies. Moreover, the major advantages and limitations of these BB removal technologies along with the recent advancements with regard to the application of innovative materials and strategies have also been elucidated. Therefore, the present review intends to aid the researchers in improving the BB removal efficiency of these technologies, thus alleviating the problem of the release of BB into the environment.

Treatment Trends and Combined Methods in Removing Pharmaceuticals and Personal Care Products from Wastewater-A Review

When discharged into wastewater, pharmaceuticals and personal care products (PPCPs) become microorganic contaminants and are among the largest groups of emerging pollutants. Human, animal, and aquatic organisms' exposures to PPCPs have linked them to an array of carcinogenic, mutagenic, and reproductive toxicity risks. For this reason, various methods are being implemented to remove them from water bodies. This report critically reviews these methods and suggests improvements to removal strategies. Biological, physical, and chemical methods such as biological degradation, adsorption, membrane filtration, and advanced electrical and chemical oxidation are the common methods used. However, these processes were not integrated into most studies to take advantage of the different mechanisms specific to each process and are synergistic in the removal of the PPCPs that differ in their physical and chemical characteristics (charge, molecular weight, hydrophobicity, hydrogen bonding, structure). In the review articles published to date, very little information is available on the use of such integrated methods for removing PPCPs. This report attempts to fill this gap with our knowledge.

Cosmetic wastewater treatment technologies: a review

Over the past three decades, environmental concerns about the water pollution have been raised on societal and industrial levels. The presence of pollutants stemming from cosmetic products has been documented in wastewater streams outflowing from industrial as well as wastewater treatment plants. To this end, a series of consistent measures should be taken to prevent emerging contaminants of water resources. This need has driven the development of technologies, in an attempt to mitigate their impact on the environment. This work offers a thorough review of existing knowledge on cosmetic wastewater treatment approaches, including, coagulation, dissolved air flotation, adsorption, activated sludge, biodegradation, constructed wetlands, and advanced oxidation processes. Various studies have already documented the appearance of cosmetics in samples retrieved from wastewater treatment plants (WWTPs), which have definitely promoted our comprehension of the path of cosmetics within the treatment cycle; however, there are still multiple blanks to our knowledge. All treatments have, without exception, their own limitations, not only cost-wise, but also in terms of being feasible, effective, practical, reliable, and environmentally friendly.

The adsorption mechanisms of oriental plane tree biochar toward bisphenol S: A combined thermodynamic evidence, spectroscopic analysis and theoretical calculations

Garden pruning waste is becoming a problem that intensifies the garbage siege. It is of great significance to purify polluted water using biochar prepared from garden pruning waste. Herein, the interaction mechanism between BPS and oriental plane tree biochar (TBC) with different surface functional groups was investigated by adsorption experiments, spectroscopic analysis and theoretical calculations. Adsorption kinetics and isotherm of BPS on TBC can be satisfactorily fitted into pseudo-second-order kinetic and Langmuir models, respectively. A rapid adsorption kinetic toward BPS was achieved by TBC in 15 min. As compared with TBC prepared at low temperature (300 °C) (LTBC), the maximum adsorption capacity of TBC prepared at high temperature (600 °C) (HTBC) can be significantly improved from 46.7 mg g^-1 to 72.9 mg g^-1. Besides, the microstructure and surface functional groups of HTBC were characterized using SEM, BET-N_2, and XPS analysis. According to density functional theory (DFT) theoretical calculations, the higher adsorption energy of HTBC for BPS was mainly attributed to π-π interaction rather than hydrogen bonding, which was further supported by the analysis of FTIR and Raman spectra as well as the adsorption thermodynamic parameters. These findings suggested that by improving π-π interaction through high pyrolysis temperature, BPS could be removed and adsorbed by biochar with high efficacy, cost-efficiency, easy availability, and carbon-negative in nature, contributing to global carbon neutrality.

Shrimp waste-derived porous carbon adsorbent: Performance, mechanism, and application of machine learning

Aquaculture generates significant amount of processing wastes (more than 500 million pounds annually in the United States), the bulk of which ends up in the environment or is used in animal feed. Proper utilization of shrimp waste can increase their economic value and divert them from landfills. In this study, shrimp waste was converted to a porous carbon (named SPC) via direct pyrolysis and activation. SPC was characterized, and its performance for adsorbing ciprofloxacin from simulated water, natural waters, and wastewater was benchmarked against a commercial powdered activated carbon (PAC). The surface area of SPC (2262 m²/g) exceeded that of PAC (984 m²/g) due to abundance of micropores and mesopores. The adsorption of ciprofloxacin by SPC was thermodynamically spontaneous (ΔG = -19 kJ/mol) and fast (k₁ = 1.05/min) at 25 °C. The capacity of SPC for ciprofloxacin (442 mg/g) was higher than that of PAC (181 mg/g). SPC also efficiently and simultaneously removed low concentrations (200 µg/L) of ciprofloxacin, long-chain per- and polyfluoroalkyl substances (PFAS), and Cu ions from water. An artificial neural network function was derived to predict ciprofloxacin adsorption and identify the relative contribution of each input parameter. This study demonstrates a sustainable and commercially viable pathway to reuse shrimp processing wastes.

FeS redox power motor for PDS continuous generation of active radicals on efficient degradation and removal of diclofenac: Role of ultrasonic

Diclofenac (DCF), as a typical representative of PPCPs, has potential ecotoxicity to the water environment. In this study, ultrasound (US) enhanced ferrous sulfide (FeS)-activated persulfate (PDS) technology (US/FeS/PDS) was used to degrade DCF. By comparing the degradation effects of US, US/PDS, FeS/PDS and US/FeS/PDS systems on DCF, this study confirmed the synergy and strengthening effects of US. The influences of single-factor experimental conditions on the US/FeS/PDS system were investigated and optimized. The FeS catalysts before and after the reaction were characterized and analyzed by X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS). The heterogeneous reaction proceeded on the surface of FeS, and a small part of FeS₂ was formed on FeS surface. During the reaction, the proportion of S^2- on the catalyst surface decreased from 51% to 44%. Correspondingly, the proportion of S_x^2- increased from 21% to 26%. It indicated that S^2- was oxidized into S_x^2- in the reaction, and the loss electrons of S^2- caused the reduction of Fe³⁺ to Fe²⁺on the FeS surface, which promoted the cycle between Fe²⁺ and Fe³⁺ in turn. Furthermore, SO₄^- and ‧OH were the main active free radicals, of which the contribution rate of ‧OH was about 34.4%, while that of SO₄^- was approximately 52.2%. In US/FeS/PDS, the introduction of US could promote the dissolution of iron on the FeS surface. US contributed to the formation of a redox power motor between S^2-S_x^2- and Fe²⁺-Fe³⁺, which continuously decomposed PDS to generate sufficient active SO₄^- and ‧OH radicals, thereby efficiently and continuously degrading DCF. Finally, the related mechanism of DCF degradation by US/FeS/PDS was summarized. Overall, US/FeS/PDS can not only efficiently degrade and remove DCF, but also has potential application value in organic pollution removal and wastewater purification.

Use of Typical Wastes as Biochars in Removing Diethyl Phthalate (Det) from Water

Diethyl phthalate (DEP), one of the six typical PAEs priority pollutants declared by the US EPA, has attracted tremendous attention due to its widespread pollution and was selected as the adsorbate in this study. Properties of biochar samples obtained from three different feedstocks, i.e., sawdust (SDBC), rice straw (RSBC), and giant reed (GRBC), pyrolyzed at 400 °C as well as their ability to adsorb DEP from an aqueous solution were investigated. The results showed that the adsorption kinetics were well fitted with the pseudo-second-order model (R2 > 0.99) and the intraparticle diffusion model (R2 > 0.98). The maximal adsorption capacity of the DEP by the prepared biochar was in an order of GRBC (46.04 mg g−1) > RSBC (31.54 mg g−1) > and SDBC (18.39 mg g−1). The higher adsorption capacity of DEP by GRBC is mainly attributed to the higher surface area. The reduction in adsorption capacity of the biochar against DEP with an increase in the solution pH (from 2.5 to 10.0) was possibly due to promoting the electrostatic repulsion between the DEP and the surface of the biochar. However, the increasing sodium ionic strength promoted the adsorption of the biochar, which could be interpreted by the reduced solubility of the DEP due to enhancing “salting out” effects as increasing sodium concentration. In addition, it was favorable for the adsorption of DEP onto the biochars at a lower temperature (15 °C) and the calculated ∆G0 was less than zero, indicating that the adsorption was a spontaneous and exothermic process. These experiments designate that these derived biochars can be used as an inexpensive adsorbent for the purification of PAEs contaminated water.

Direct Spectroscopic Evidence for Charge-Assisted Hydrogen-Bond Formation between Ionizable Organic Chemicals and Carbonaceous Materials

The direct evidence for the formation of charge-assisted hydrogen bond (CAHB) between the charged groups of ionizable organic chemicals (IOCs) and carbonaceous materials with similar proton affinity remains elusive. We therefore selected three pharmaceutical contaminants (PCs) as representative IOCs to provide the direct evidence of CAHB formation between IOCs and functionalized carbon nanotubes (CNTs) and its intensity/contribution to PC sorption on CNTs by NMR, FTIR, and DFT analyses. Sorption of PCs on functionalized CNTs resulted in the FTIR characteristic peak that appeared at a higher frequency (3787 cm^-1) and the ¹H NMR characteristic peak that emerged at an extremely low-field region (<18.0 ppm), which can be used as the direct spectroscopic evidence for CAHB formation. Both homonuclear CAHB (HM-CAHB, e.g., [O-H···O]^-) and heteronuclear CAHB (HT-CAHB, e.g., [N⁺-H···O^-]/[O-H···N]⁺) exhibited a much higher sorption energy (|E_ads| ≥ 56.24 kJ/mol) than ordinary hydrogen bond (OHB, |E_ads| ≤ 6.136 kJ/mol), leading to a greater sorption contribution (HM-/HT-CAHB ≥ 42.3%, OHB ≤ 36.5%) and irreversibility (hysteresis index: HM-/HT-CAHB ≥ 1.69, OHB ≤ 0.43) of PCs on CNTs. This work presents the direct evidence for CAHB formation between IOCs and CNTs, which is significant for understanding and predicting the environmental fate and risk of IOCs, thus providing new insights for controlling their pollution using specifically designed carbonaceous materials.

Ozonation/adsorption hybrid treatment system for improved removal of natural organic matter and organic micropollutants from water - A mini review and future perspectives

Elevated concentrations of natural organic matter (NOM) and organic micropollutants (OMPs) can contaminate the quality of drinking water, and current water treatment technologies are not always successful in removing all their constituents. Ozonation and adsorption are two advanced processes with different removal mechanisms used to treat NOM and OMPs. Their treatment efficiency depends on the strength and kinetics of adsorption and ozonation (ozone molecule and OH radical (OH•) reaction) of the individual NOM constituents and OMPs. They are individually able to remove many of the NOM fractions and OMPs but not satisfactory in removing the vast array of their components which differ in their physico-chemical characteristics, for example molecular weight, charge, functional groups, aromaticity, and hydrophobicity/hydrophilicity. Significant progress has been made by integrating these processes (ozonation followed by activated carbon (AC) adsorption) but they need further improvement to efficiently target all NOM fractions and the various OMPs. Ozonation transforms the larger NOM molecules into smaller molecular sizes with lower aromaticity and hydrophobicity, subsequently resulting in reduced adsorption. The reduced adsorption of these molecules diminishes their competition against OMP adsorption resulting in increased OMP removal. Adsorption can remove unoxidized pollutants as well as the by-products of ozonation, and some of them are suspected to be human carcinogens. Of the commonly used adsorbents, anion exchange resin and AC, the former has higher affinity towards negatively charged humic fraction and OMPs. Conversely, the latter has higher affinity towards the hydrophobic constituents and smaller sized constituents which diffuse into AC pores and get adsorbed. Biofilm formed by long-term use of AC also contributes to enhanced removal of NOM and OMPs. This paper briefly reviews the currently available literature on removing NOM and OMPs by the ozonation/adsorption integrated process. It also suggests a new method for further increasing the efficiency of this process.

Screen-Printed Voltammetric Sensors-Tools for Environmental Water Monitoring of Painkillers

The dynamic production and usage of pharmaceuticals, mainly painkillers, indicates the growing problem of environmental contamination. Therefore, the monitoring of pharmaceutical concentrations in environmental samples, mostly aquatic, is necessary. This article focuses on applying screen-printed voltammetric sensors for the voltammetric determination of painkillers residues, including non-steroidal anti-inflammatory drugs, paracetamol, and tramadol in environmental water samples. The main advantages of these electrodes are simplicity, reliability, portability, small instrumental setups comprising the three electrodes, and modest cost. Moreover, the electroconductivity, catalytic activity, and surface area can be easily improved by modifying the electrode surface with carbon nanomaterials, polymer films, or electrochemical activation.

Adsorption and desorption of antiviral drugs (ritonavir and lopinavir) on sewage sludges as a potential environmental risk

The aim of this work was to evaluate the adsorption capacity and mechanism of two antiviral drugs AVDs (lopinavir (LOP) and ritonavir (RIT)) on three various sewage sludges (SSLs). The results showed that SSLs differed in the structure and chemical composition and LOP and RIT had a high affinity to the studied SSLs (K_d in ranges 2076-3449 L/kg). The adsorption capacities differed between SSLs and ranged 7.55-8.71 mg/g (RIT) and 8.10-8.64 mg/g (LOP). The Freundlich model provided a best fitting of adsorption isotherms of all AVDs-SSLs. The adsorption kinetics were best described by pseudo-second order kinetic model. The adsorption of LOP and RIT on SSLs was exothermic, spontaneous, and thermodynamically feasible. The sorption of LOP and RIT to SSLs was complex due to the diverse chemical composition of SSLs and the differences in the chemical structure of AVDs. Analysis of binary solution of both AVDs showed the competition effect between AVDs and a decrease in adsorption efficiency (3-17%) compared to single solutions. The amount of desorbed AVDs from all SSLs was low (less than 15%). The findings of the present work are significant in the prediction of fate and persistence of AVDs on SSLs in the context of their further transmission and possible environmental contamination.

Development of activated carbon from Schizolobium parahyba (guapuruvu) residues employed for the removal of ketoprofen

Schizolobium parahyba species can be found in all of South America, producing several residues that can be a major opportunity to develop activated carbon. This work presents the investigation regarding the development of a high specific surface activated carbon (981.55 m² g^-1) and its application in the adsorption of ketoprofen from the aqueous media. The ketoprofen molecules were better adhered to the adsorbent surface under acidic conditions (pH = 2), being the ideal adsorbent dosage determined as 0.7 g L^-1, resulting in satisfactory values. It was found that the system reached equilibrium in 200 to 250 min depending on the initial concentration studied, achieving an adsorption capacity of 229 mg g^-1. The general order was the most suitable model for describing the experimental data, with an R² ≥ 0.9985 and MSR ≤ 63.40 (mg g^-1)². The equilibrium adsorption found that the temperature increases the adsorption capacity, achieving 447.35 mg g^-1 at 328 K. Besides that, the Tóth model was the most suitable for describing the isotherms R² ≥ 0.9990 and MSR ≤ 25.67 (mg g^-1)², indicating a heterogeneous adsorbent. The thermodynamic values found that the adsorption of ketoprofen is spontaneous (average ΔG⁰ of - 32.79 kJ mol^-1) and endothermic (ΔH⁰ 10.44 kJ mol^-1). The treatment of simulated effluent with the developed adsorbent was efficient, removing 90% of ketoprofen, ibuprofen, and salts. It was found that the adsorbent is reaming its adsorption capacity up to the 5th cycle, progressively decreasing the adsorption capacity until the adsorption does not occur past the 12th cycle. Overall, the results demonstrated that the activated carbon from residual biomass of the Schizolobium parahyba species could be an excellent alternative in obtaining an effective adsorbent to treat wastewater-containing drugs.

Removal of pharmaceuticals from water using sewage sludge-derived biochar: A review

In recent years, considerable attention has been paid to the beneficial utilization of sewage sludge to reduce the risks associated with sludge disposal. Besides other applications of sludge, biochar produced from sludge has also been employed for the elimination of various pollutants from water. This review critically evaluates the recent progress in applications of sludge-based biochar for the adsorption of pharmaceuticals from water. The synthesis techniques of biochar production from sludge and their effects on physicochemical characteristics of produced biochar are discussed. The removal of various pharmaceuticals by sludge-based biochar are described in detail, with the emphasis on the adsorption mechanism and their reusability potential. It is evident from the literature that sludge-based biochar has demonstrated excellent potential for the adsorption of numerous pharmaceuticals from the aqueous phase. The major hurdles and issues related to the synthesis of sludge-based biochar and applications are highlighted, with reference to the adsorption of pharmaceuticals. Finally, a roadmap is suggested along with future research directions to ensure the sustainable production of biochar from sludge and its applications in water treatment.

Adsorption and catalytic degradation of preservative parabens by graphene-family nanomaterials

Parabens pose increasing threats to human health due to endocrine disruption activity. Adsorption and degradation of parabens by three types of graphene-family nanomaterials (GFNs) were therefore investigated. For a given paraben, the maximum adsorption capacities (Q⁰) followed the order of reduced graphene oxide (RGO) > multilayered graphene (MG) > graphene oxide (GO); for a given GFN, Q⁰ followed the order of butylparaben (BuP) > propylparaben (PrP) > ethylparaben (EtP) > methylparaben (MeP), dominated by hydrophobic interaction. MeP removal by all the three GFNs was highly enhanced (0.55-4.37 times) with the assistance of H₂O₂ due to additional catalytic degradation process, and MG showed the highest removal enhancement. ∙OH was confirmed as the dominant radicals responsible for parabens degradation. For MG and RGO, the metal impurities (Fe, Cu, Mn, and Co) initiated Fenton-like reaction with H₂O₂ to generate ∙OH. GO contained oxygen-centered free radicals, which were responsible for ∙OH formation via transferring electron to H₂O₂. Four degradation byproducts of MeP were identified, including oxalic, propanedioic, fumaric, and 2,5-dihydroxybenzoic acids. Combined with density function theory calculations, the degradation sites and pathways were identified and confirmed. These findings provide useful information on mechanistic understanding towards the adsorption and degradation of parabens by GFNs.

Optimization of ketoprofen adsorption from aqueous solutions and simulated effluents using H2SO4 activated Campomanesia guazumifolia bark

This study used the bark of the forest species Campomanesia guazumifolia modified with H₂SO₄ to absorb the anti-inflammatory ketoprofen from aqueous solutions. FTIR spectra confirmed that the main bands remained after the chemical treatment, with the appearance of two new bands related to the elongation of the carbonyl group present in hemicellulose. Micrographs confirmed that the surface started to contain a new textural shape after acid activation, having new pores and cavities. The drug adsorption's optimum conditions were obtained by response surface methodology (RSM). The adsorption was favored at acidic pH (2). The dosage of 1 g L^-1 was considered ideal, obtaining good indications of removal and capacity. The Elovich model very well represented the kinetic curves. The isotherm studies indicated that the increase in temperature negatively affected the adsorption of ketoprofen. A maximum adsorption capacity of 158.3 mg g^-1 was obtained at the lower temperature of 298 K. Langmuir was the best-fit isotherm. Thermodynamic parameters confirmed the exothermic nature of the system (ΔH⁰ = -8.78 kJ mol^-1). In treating a simulated effluent containing different drugs and salts, the removal values were 35, 50, and 80% at 15, 30, and 180 min, respectively. Therefore, the development of adsorbent from the bark of Campomanesia guazumifolia treated with H₂SO₄ represents a remarkable alternative for use in effluent treatment containing ketoprofen.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Competitive and/or cooperative interactions of graphene-family materials and benzo[a]pyrene with pulmonary surfactant: a computational and experimental study

BACKGROUND

Airborne nanoparticles can be inhaled and deposit in human alveoli, where pulmonary surfactant (PS) molecules lining at the alveolar air-water interface act as the first barrier against inhaled nanoparticles entering the body. Although considerable efforts have been devoted to elucidate the mechanisms underlying nanoparticle-PS interactions, our understanding on this important issue is limited due to the high complexity of the atmosphere, in which nanoparticles are believed to experience transformations that remarkably change the nanoparticles' surface properties and states. By contrast with bare nanoparticles that have been extensively studied, relatively little is known about the interactions between PS and inhaled nanoparticles which already adsorb contaminants. In this combined experimental and computational effort, we investigate the joint interactions between PS and graphene-family materials (GFMs) with coexisting benzo[a]pyrene (BaP).

RESULTS

Depending on the BaP concentration, molecular agglomeration, and graphene oxidation, different nanocomposite structures are formed via BaPs adsorption on GFMs. Upon deposition of GFMs carrying BaPs at the pulmonary surfactant (PS) layer, competition and cooperation of interactions between different components determines the interfacial processes including BaP solubilization, GFM translocation and PS perturbation. Importantly, BaPs adsorbed on GFMs are solubilized to increase BaP's bioavailability. By contrast with graphene adhering on the PS layer to release part of adsorbed BaPs, more BaPs are released from graphene oxide, which induces a hydrophilic pore in the PS layer and shows adverse effect on the PS biophysical function. Translocation of graphene across the PS layer is facilitated by BaP adsorption through segregating it from contact with PS, while translocation of graphene oxide is suppressed by BaP adsorption due to the increase of surface hydrophobicity. Graphene extracts PS molecules from the layer, and the resultant PS depletion declines with graphene oxidation and BaP adsorption.

CONCLUSION

GFMs showed high adsorption capacity towards BaPs to form nanocomposites. Upon deposition of GFMs carrying BaPs at the alveolar air-water interface covered by a thin PS layer, the interactions of GFM-PS, GFM-BaP and BaP-PS determined the interfacial processes of BaP solubilization, GFM translocation and PS perturbation.

Carbamazepine removal from aqueous solution by synthesized reduced graphene oxide-nano zero valent iron (Fe0-rGO) composite: theory, process optimization, and coexisting drugs effects

Synthesized Fe⁰-rGO nanocomposite with ratio of 1/1 (w/w) was prepared and has been used as adsorbent for the removal of Carbamazepine (CBZ) from aqueous solution. The adsorbent was characterized by various techniques such as Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Field Emission Scanning Electron Microscopy (FE-SEM) analyses. Linear experiments were performed to compare the best fitting isotherms and kinetics. The Freundlich isotherm (R²>0.90) and pseudo second order kinetic (R²>0.99) fitted well the experimental data. On the basis of the Langmuir isotherm, the maximum adsorption capacity of Fe⁰-rGO for CBZ was up to 50 mg g^-1 at 30 °C. The pH, adsorbent dose, and initial concentration of CBZ were observed to be the leading parameters that affected the removal of CBZ considering the analysis of variance (ANOVA; p<0.05). The optimum process value of variables obtained by numerical optimization corresponds to pH 3.07, an adsorbent dose of 36.2 mg, an initial CBZ concentration of 5 mg L^-1 and at 30.15 °C. The results of optimum conditions reveal that a maximum of 94% removal efficiency can be achieved; whereas, this phenomenon was independent of temperature (p-value>0.05). Moreover, Fe⁰-rGO can be used to remove diclofenac (DIC) and cetirizine (CTZ) simultaneously. To sum up, the Fe⁰-rGO is a promising adsorbent not only for the efficient removal of CBZ but also for the reduction of coexisting drugs in aqueous solution.

Adsorption modeling of organic compounds (OCs) by carbon nanotubes (CNTs): role of OC and CNT properties on the linear solvation energy relationship

This study evaluated a comprehensive database for the adsorption of polar and nonpolar organic compounds (OCs) by carbon nanotubes (CNTs) and to use the linear solvation energy relationship (LSER) technique for developing predictive adsorption models of OCs by multi-walled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs). The results showed that coefficient of determinations (R²) values for all compounds are higher variability in the 200 g/mol molecular weight cutoff (74-99%). When the molecular weight cutoff of all OCs is higher than 200 g/mol, the trend of their R² values is decreased (less than 70%). Among all adsorbate descriptor coefficients, V and B terms are the most significant descriptors (p-values ≤ 0.05) in LSER equations for adsorption of low molecular weight polar and nonpolar OCs by both CNTs. Besides, K_OW normalization of all K_d values did not have significant impact on the regression of the LSER model, indicating that hydrophobic interactions are not sole mechanism for the adsorption of OCs on CNTs. Lastly, SWCNTs exhibited higher polar OCs uptake than MWCNTs, which was attributed to more polar surface of SWCNTs as suggested by its high oxygen content (%10).

Evaluation of graphenic and graphitic materials on the adsorption of Triton X-100 from aqueous solution

Presently, graphenic nanomaterials are being studied as candidates for wastewater pollutant removal. In this study, two graphite oxides produced from natural graphite with different grain sizes (325 and 10 mesh), their respective reduced graphene oxides and one reduced graphene oxide with nitrogen functional groups were synthesized and tested to remove a surfactant model substrate, Triton X-100, from an aqueous solution. Kinetic experiments were carried out and adjusted to pseudo-first order equation, pseudo-second order equation, Elovich, Chain-Clayton and intra-particle diffusion models. Reduced graphene oxides displayed an instantaneous adsorption due to their accessible and hydrophobic surfaces, while graphite oxides hindered the TX100 adsorption rate due to their highly superficial oxygen content. Results from the adsorption isotherms showed that the Sips model perfectly described the TX100 adsorption behavior of these materials. Higher adsorption capacities were developed with reduced graphene oxides, being maximum for the material produced from the lower graphite grain size (q_e = 3.55·10^-6 mol/m²), which could be explained by a higher surface area (600 m²/g), a lower amount of superficial oxygen (O/C = 0.04) and a more defected structure (I_D/I_G = 0.85). Additionally, three commercial high surface area graphites in the range of 100-500 m²/g were evaluated for comparison purposes. In this case, better adsorption results were obtained with a more graphitic material, HSAG100 (q_e = 1.72·10^-6 mol/m²). However, the best experimental results of this study were obtained using synthesized graphenic materials.

Phototransformation of Graphene Oxide on the Removal of Sulfamethazine in a Water Environment

Graphene oxide (GO) is widely used in various fields and has raised concerns regarding its potential environmental fate and effect. However, there are few studies on its influence on coexisting pollutants. In this study, the phototransformation of GO and coexisting sulfamethazine (SMZ) under UV irradiation was investigated, with a focus on the role of reactive oxygen species. The results demonstrated that GO promoted the degradation of SMZ under UV irradiation. The higher the concentration of GO, the higher the degradation rate of SMZ, and the faster the first-order reaction rate. Two main radicals, ∙OH and ¹O₂, both contributed greatly in terms of regulating the removal of SMZ. Cl⁻, SO₄²⁻, and pH mainly promoted SMZ degradation by increasing the generation of ∙OH, while humic acid inhibited SMZ degradation due to the reduction of ∙OH. Moreover, after UV illumination, the GO suspension changed from light yellow to dark brown with increasing absorbance at a wavelength of 225 nm. Raman spectra revealed that the I_D/I_G ratio slightly decreased, indicating that some of the functional groups on the surface of GO were removed under low-intensity UV illumination. This study revealed that GO plays important roles in the photochemical transformation of environmental pollutants, which is helpful for understanding the environmental behaviors and risks of nanoparticles in aquatic environments.

TiO2 (Core)/Crumpled Graphene Oxide (Shell) Nanocomposites Show Enhanced Photodegradation of Carbamazepine

The presence of pharmaceuticals and personal care products (PPCPs) in aquatic systems is a serious threat to human and ecological health. The photocatalytic degradation of PPCPs via titanium oxide (TiO2) is a well-researched potential solution, but its efficacy is limited by a variety of environmental conditions, such as the presence of natural organic macromolecules (NOM). In this study, we investigate the synthesis and performance of a novel photoreactive composite: a three-dimensional (3D) core (TiO2)-shell (crumpled graphene oxide) composite (TiGC) used as a powerful tool for PPCP removal and degradation in complex aqueous environments. TiGC exhibited a high adsorption capacity (maximum capacity 11.2 mg/g, 100 times larger than bare TiO2) and a 30% enhancement of photodegradation (compared to bare TiO2) in experiments with a persistent PPCP model, carbamazepine (CBZ). Furthermore, the TiGC performance was tested under various conditions of NOM concentration, light intensity, CBZ initial concentration, and multiple cycles of CBZ addition, in order to illustrate that TiGC performance is stable over a range of field conditions (including NOM). The enhanced and stable performance of TiCG to adsorb and degrade CBZ in water extends from its core-shell composite nanostructure: the crumpled graphene oxide shell provides an adsorptive surface that favors CBZ sorption over NOM, and optical and electronic interactions between TiO2 and graphene oxide result in higher hydroxyl radical (•OH) yields than bare TiO2.

Safety evaluation and ibuprofen removal via an Alternanthera philoxeroides-based biochar

Pharmaceutical and personal care products (PPCPs) are a representative class of emerging contaminants. This study aimed to investigate the PPCP removal performance and application safety of a biochar fabricated using the invasive plant Alternanthera philoxeroides (APBC). According to scanning electron microscopy and pore size analyses, APBC exhibited a porous structure with a specific surface area of 857.5 m²/g. A Fourier transform infrared spectroscopy analysis indicated the presence of surface functional groups, including phosphorus-containing groups, C=O, C=C, and -OH. The adsorption experiment showed that the maximum removal efficiency of ibuprofen was 97% at an initial concentration of 10 mg/L and APBC dosage of 0.8 g/L. The adsorption kinetics were fitted by the pseudo-second-order model with the highest correlation coefficient (R² = 0.9999). The adsorption isotherms were well described by the Freundlich model (R² = 0.9896), which indicates a dominant multilayer adsorption. The maximum adsorption capacity of APBC was 172 mg/g. A toxicity evaluation, based on Chlorella pyrenoidosa and human epidermal BEAS-2B cells, was carried out using a spectrum analysis, thiazolyl blue tetrazolium bromide assay, and flow cytometry. The results of the above showed the low cytotoxicity of APBC and demonstrated its low toxicity in potential environmental applications.

Effective adsorption of bisphenol A from aqueous solution over a novel mesoporous carbonized material based on spent bleaching earth

In this study, the novel mesoporous carbonized material (HSBE/C) was prepared from clay/carbon composite (SBE/C) treated with hydrofluoric acid (HF) for the first time, and was employed to efficiently adsorb bisphenol A (BPA) in water. Specifically, SBE/C was derived from the pyrolysis of spent bleaching earth (SBE), an industrial waste. HF removed SiO₂ from SBE/C and increased the specific surface area of HSBE/C (from 100.21 to 183.56 m²/g), greatly providing more adsorption sites for enhanced BPA adsorption capacity. The Langmuir monolayer maximum adsorption capacity of HSBE/C (103.32 mg/g) was much higher than the commercial activated carbon (AC) (42.53 mg/g). The adsorption process by HSBE/C followed well with the Freundlich isotherm model and the pseudo-second-order kinetic model and also was endothermic (ΔH⁰ > 0) and spontaneous (ΔG⁰ < 0). Based on the systematic characterization and factor experiment (temperature, dosage, initial pH, co-existing ions), BPA adsorption mechanism by HSBE/C likely included the hydrogen bonding, electrostatic interaction, and hydrophobic interaction. Moreover, there was no secondary pollution during the total adsorption process. Extraordinary, HSBE/C manifested stability by NaOH desorption regeneration. This study provides a new sight for application of waste-based materials as the promising adsorbents in the treatment of endocrine disruptors.

Modelling of the adsorption of pharmaceutically active compounds on carbon-based nanomaterials

Understanding and acquiring knowledge about the adsorption of pharmaceuticals on carbon-based nanomaterials (CNMs) is imperative to the chemical engineering applications of CNMs, as well as to risk assessment and pollution control of both CNMs and pharmaceuticals. A computational assessment of the mechanism and thermodynamics of the adsorption of 18 most common pharmaceuticals (acetaminophen, acetylsalicylic acid, atenolol, caffeine, carbamazepine, clofibric acid, diclofenac, fenofibric acid, fluoxetine, gemfibrozil, ibuprofen, ketoprofen, naproxen, phenazone, primidone, propranolol, salicylic acid, tramadol) on four different CNMs (pristine/functionalised graphene and carbon nanotube) in two different solvents (water and n-octanol) was provided. We show that the adsorption of pharmaceuticals on pristine CNMs is controlled by dispersion forces, π-interactions and hydrophobic interaction. On the other hand, adsorption on functionalised CNMs is controlled by hydrogen bonding and Coulombic interactions. Furthermore, we demonstrate how functionalization of CNM, CNM curvature and background solution properties modulate the intensity of non-covalent interactions and their contribution towards adsorption free energy. With this knowledge, we pinpoint functionalised graphene at environmental pH as the most effective setting for the removal of a given set of pharmaceuticals from water and wastewater. Finally, we show that CNMs may transport pharmaceuticals into living organisms and release them in nonpolar mediums such as cellular membranes and fat cells.

Modification of Ceramic Membranes with Carbon Compounds for Pharmaceutical Substances Removal from Water in a Filtration-Adsorption System

The aim of this work is to develop a new type of carbon-ceramic membranes for the removal of pharmaceutical substances from water. The membranes were prepared by the chemical modification method using an organosilicon precursor—octadecyltrichlorosilane (ODTS). Graphene oxide, multi-walled carbon nanotubes with carboxylic groups, and single-walled carbon nanotubes were used in the modification process. The filtration properties and adsorption properties of the developed membranes were tested. In order to characterize the membrane, the water permeability, the change of the permeate flux in time, and the adsorbed mass of the substance were determined. Additionally, the surface properties of the membranes were characterized by contact angle measurements and porosimetry. The antibiotic tetracycline was used in the adsorption tests. Based on the results, the improved adsorption properties of the modified membrane in relation to the unmodified membrane were noticed. Novel ceramic membranes modified with MWCNT are characterized by 45.4% removal of tetracycline and permeate flux of 520 L·h·m⁻²·bar⁻¹. We demonstrated the ability of modified membranes to adsorb pharmaceuticals from water streams that are in contact with the membrane. Novel membranes retain their filtration properties. Therefore, such membranes can be used in an integrated filtration–adsorption process.