Dual Metalation in a Two-Dimensional Covalent Organic Framework for Photocatalytic C-N Cross-Coupling Reactions

Fine tuning dual active sites in modulating cascade electrocatalytic nitrate reduction over covalent organic framework

Conversion of NO3- to NH3 proceeds stepwise in natural system under two different enzymes involving intermediate NO2-. Artificial electro-driven NO3- reduction also faces the obstacle of low faradaic efficiency due to insufficient utilization of this intermediate. Herein, we demonstrate a bimetallic COF-based electrocatalyst for the cascade catalysis of NO3--to-NO2--to-NH3 for the first time. TpBpy-Cu2Co4 exhibits a significantly improved performance, with an enhancement factor of 1.4-2 compared to monometallic TpBpy-M. The NH3 yield rate achieves 25.6 mg h-1 mgcat.-1 at -0.55 V vs RHE over TpBpy-Cu2Co4, together with excellent faradaic efficiency (93.4 %). This achievement demonstrates cascade catalysis between Co and Cu units, and their distinct roles are investigated through electrochemical experiments and theory calculations. In electrocatalytic process, Cu site facilities *NO3-to-*NO3H step, while the Co site significantly decreases the energy barrier of *NHOH-to-*NH. The present work provides a valuable inspiration in designing efficient catalysts for cascade reaction.

3D Covalent Organic Frameworks with 16-Connectivity for Photocatalytic C(sp3)-C(sp2) Cross-Coupling

The connectivity (valency) of building blocks for constructing 3D covalent organic frameworks (COFs) has long been limited to 4, 6, 8, and 12. Developing a higher connectivity remains a great challenge in the field of COF structural design. Herein, this work reports a hierarchical expansion strategy for making 16-connected building blocks to construct 3D COFs with sqc topology. The [16 + 2] construction achieved by condensation between a 16-connected carbazolyl dicyanobenzene-based building block (CzTPN) and linear diamino linkers (BD or Bpy) affords two 3D COFs (named CzBD COF and CzBpy COF). Furthermore, attributed to the well-organized donor-acceptor (D-A) heterojunction, the Ni chelated CzBpy COF (Ni@CzBpy COF) exhibits excellent performance for photoredox/Ni dual catalytic C(sp3)-C(sp2) cross-coupling of alkyltrifluoroborates with aryl halides, achieving a maximum 98% conversion and 94% yield for various substrates. This work developed the first case of high-connectivity COFs bearing 16-connected units, which is the highest connectivity reported until now, and achieved efficient photocatalysis applications, thus greatly enriching the possibilities of COFs.

Photocatalytic Decarboxylative Fluorination by Quinone-Based Isoreticular Covalent Organic Frameworks

The strategic incorporation of fluorine atoms into molecules has become a cornerstone of modern pharmaceuticals, agrochemicals, and materials science. Herein, we have developed a covalent organic framework (COF)-based, robust photocatalyst that enables the photofluorodecarboxylation reaction of diverse carboxylic acids, producing alkyl fluorides with remarkable efficiency. The catalytic activity of an anthraquinone-based COF catalyst TpAQ outperforms other structurally analogous β-ketoenamine COFs. Through comprehensive control experiments, photoluminescence, and electrochemical studies, we have elucidated the unique features of the material and the mechanistic pathway. This in-depth understanding has paved the way for optimizing the reaction conditions and achieving high yields of alkyl fluorides. The versatility of this protocol extends to a broad range of aliphatic acids with diverse functional groups and heterocycles. It also enabled the late-stage diversification of anti-inflammatory drugs and steroid derivatives. This opens up exciting possibilities for synthesizing novel pharmaceuticals and functionalized molecules. The methodology was also generalized to other light-mediated decarboxylative halogenation reactions. Furthermore, our method demonstrates scalability under both batch and continuous flow conditions, offering a promising approach for large-scale production. Additionally, the TpAQ catalyst exhibits exceptional durability and can be reused multiple times without significant activity loss (>80% yield after the eighth cycle), making it a sustainable and cost-effective solution. This work lays the foundation for developing efficient and sustainable light-driven synthesis methods using COFs as photocatalysts with potential applications beyond alkyl halide synthesis.

Enhanced Alkene Oxidative Cleavage in Water via Photoexcited FeIV Species within Covalent Organic Framework Thin Films

The oxidative cleavage of alkenes is a crucial step in synthesizing key organic molecules featuring carbonyl functional groups prevalent in natural products and pharmaceuticals. We introduce a photochemical method for heterogeneous C=C bond cleavage, employing photo-catalytically generated [(bTAML)FeIV-O-FeIV(bTAML)]- species (where bTAML stands for biuret-modified tetraamido macrocyclic ligand) in aqueous environments under gentle conditions. Leveraging the photosensitizing properties of Covalent Organic Frameworks (COFs) and their advantageous morphological traits as films, we enhance the reaction by closely associating the substrate with the catalyst. This study marks the inaugural demonstration of Fe2 IV-μ-oxo radical cation and FeIV=O species facilitating alkene cleavage in water against a backdrop of a hydrophobic COF. Through comprehensive mechanistic studies, including control experiments, we confirm that these two high-valent iron oxo species collaborate to cleave alkenes, forming an intermediate epoxide. Our approach yields moderate to high success across various alkenes, displaying diverse functional groups (achieving up to 75 % yield) with notable efficiency and selectivity towards aldehyde/ketone products. Moreover, the heterogeneous COF film, immobilizing (Et4N)2[FeIII(Cl)bTAML], exhibits exceptional recyclability, enduring up to four cycles.

Cascade Electrocatalytic Reduction of Nitrate to Ammonia Using a Heterobimetallic Covalent Organic Framework Composed of Cu-Porphyrin and Co-Bipyridine

The electrocatalytic reduction of nitrate (NO3-) to ammonia (NH3) not only offers an effective solution to environmental problems caused by the accumulation of NO3- but also provides a sustainable alternative to the Haber-Bosch process. However, the conversion of NO3- to NH3 is a complicated process involving multiple steps, leading to a low Faradaic efficiency (FE) for NH3 production. The structural designability of covalent organic frameworks (COFs) renders feasible and precise modulation at the molecular level, facilitating the incorporation of multiple well-defined catalytic sites with different reactivities into a cohesive entity. This promotes the efficiency of the overall reaction through the coupling of multistep reactions. Herein, heterobimetallic CuP-CoBpy was prepared by postmodification, involving the anchoring of cobalt ions to the CuP-Bpy structure. As a result of the cascade effect of the bimetallic sites, CuP-CoBpy achieved an outstanding NH3 yield of 13.9 mg h-1 mgcat.-1 with a high FE of 96.7% at -0.70 V versus the reversible hydrogen electrode and exhibited excellent stability during catalysis. A series of experimental and theoretical studies revealed that the CuP unit facilitates the conversion of NO3- to NO2-, while the CoBpy moiety significantly prompts the reduction of NO2- to NH3. This study demonstrates that tailoring the structural units for the construction of COFs based on each step in the multistep reaction can enhance both the catalytic activity and product selectivity of the overall process.

Covalent Organic Framework Nanoarchitectonics: Recent Advances for Precious Metal Recovery

The recovery of precious metals (PMs) from secondary resources has garnered significant attention due to environmental and economic considerations. Covalent organic frameworks (COFs) have emerged as promising adsorbents for this purpose, owing to their tunable pore size, facile functionalization, exceptional chemical stability, and large specific surface area. This review provides an overview of the latest research progress in utilizing COFs to recover PMs. Firstly, the design and synthesis strategies of chemically stable COF-based materials, including pristine COFs, functionalized COFs, and COF-based composites, are delineated. Furthermore, the application of COFs in the recovery of gold, silver, and platinum group elements is delved into, emphasizing their high adsorption capacity and selectivity as well as recycling ability. Additionally, various interaction mechanisms between COFs and PM ions are analyzed. Finally, the current challenges faced by COFs in the field of PM recovery are discussed, and potential directions for future development are proposed, including enhancing the recyclability and reusability of COF materials and realizing the high recovery of PMs from actual acidic wastewater. With the targeted development of COF-based materials, the recovery of PMs can be realized more economically and efficiently in the future.

Single-Atom Iron Catalysts with Core-Shell Structure for Peroxymonosulfate Oxidation

The chemical tolerance of ketoenamine covalent organic frameworks (COFs) is excellent; however, the tight crystal structure and low surface area limit their applications in the field of catalysis. In this work, a porous single-atom iron catalyst (FeSAC) with a core-shell structure and high surface area was synthesized by using Schiff base COF nanospheres as the core and ketoenamine COF nanosheets growth on the surfaces. Surface defects were created using sodium cyanoborohydride etching treatment to increase specific surface area. The dye degradation experiments by peroxymonosulfate (PMS) catalyzed by the FeSAC proved that methylene blue can be degraded with a degradation rate constant of 0.125 min-1 under the conditions of 0.1 g L-1 catalyst dosage and 0.05 g L-1 peroxymonosulfate. The FeSAC/PMS system effectively degrades various pollutants in the pH range of 4-10 with over 80% efficiency for four cycles and can be recovered by soaking in iron salt solution. Free radical quenching experiments confirmed that singlet oxygen and superoxide radicals are the main active species for catalysis.

A Titanium-Based Metal-Organic Framework For Tandem Metallaphotocatalysis

Metal-organic frameworks (MOFs) have garnered substantial attention for their unique properties, such as high porosity and tunable structures, making them versatile for various applications. This paper constructs photoactive titanium-organic frameworks by combining Ti(IV) clusters and a bipyridine linker. The MOF is synthesized in situ through imine condensation, resulting in NU-2300. Subsequent ex situ nickel salt complexation results in NU-2300-Ni, which is then used for light-mediated carbon-heteroatom cross-couplings. The photophysical properties of the metallaphotocatalyst were investigated by UV-vis and EPR analyses, and both the Ti cluster and the bipyridine linker were found to contribute to successful catalysis, making it a tandem catalyst. The heterogeneous material retained its performance through five cycles of thioetherification. This work contributes not only to MOF synthetic strategies but also to expanding MOF applications as recyclable, tandem metallaphotocatalysts.

Heterogeneous Porous Synergistic Photocatalysts for Organic Transformations

Recent interest has surged in using heterogeneous carriers to boost synergistic photocatalysis for organic transformations. Heterogeneous catalysts not only facilitate synergistic enhancement of distinct catalytic centers compared to their homogeneous counterparts, but also allow for the easy recovery and reuse of catalysts. This mini-review summarizes recent advancements in developing heterogeneous carriers, including metal-organic frameworks, covalent-organic frameworks, porous organic polymers, and others, for synergistic catalytic reactions. The advantages of porous materials in heterogeneous catalysis originate from their ability to provide a high surface area, facilitate enhanced mass transport, offer a tunable chemical structure, ensure the stability of active species, and enable easy recovery and reuse of catalysts. Both photosensitizers and catalysts can be intricately incorporated into suitable porous carriers to create heterogeneous dual photocatalysts for organic transformations. Notably, experimental evidence from reported cases has shown that the catalytic efficacy of heterogeneous catalysts often surpasses that of their homogeneous analogues. This enhanced performance is attributed to the proximity and confinement effects provided by the porous nature of the carriers. It is expected that porous carriers will provide a versatile platform for integrating diverse catalysts, thus exhibiting superior performance across a range of organic transformations and appealing prospect for industrial applications.

One-Pot Synthesis of a Mixed-Valent Copper(I/II)-Coordinated Covalent Organic Framework Induced by γ-Ray Radiation

Metal-anchored covalent organic frameworks (COFs), as a class of significant derivatives of COFs, are widely used as heterogeneous catalysts in diverse chemical reactions. However, they are typically synthesized via post-treatment strategies, which often lead to the decline of COF crystallinity, decrease of porous properties, instability in catalytic performances, generation of additional chemical waste, and consumption of excess time and energy. In this work, we demonstrate an approach to construct a metal-functionalized COF via a one-pot method induced by γ-ray radiation. Specifically, copper-coordinated COF was in situ synthesized by irradiating a mixture of monomers and copper salt under ambient conditions. Interestingly, the initial Cu2+ ions were reduced to Cu+ ions by the radiation-generated reducing species, affording a unique mixed-valent copper(I/II)-coordinated COF. Additionally, the copper-coordinated COF displayed enhanced crystallinity and porous properties compared to those of the parent COF, displaying an opposite trend to the postsynthetic method. Notably, the introduced copper on the COF skeleton endowed the parent COF with catalytic ability. The resulting copper-coordinated COF exhibited remarkable catalytic performances in the reduction of 4-nitrophenol to 4-aminophenol and maintained almost unchanged catalytic performance after five catalytic cycles.

Selective oxidation of β-keto ester modulated by the d-band centers in D-A conjugated microporous metallaphotoredox catalysts containing M-salen (MZn, Cu and Co) and triazine monomers

Photocatalytic selective oxidation plays an important role in developing green chemistry. However, it is challenging to design an efficient photocatalyst for controlling the selectivity of photocatalytic oxidation reaction and exploring its detailed mechanism. Here, we synthesized three conjugated microporous polymers (CMPs) with D-A structures, named M-SATE-CMPs (MZn, Cu and Co), with different d-band centers based on different metal centers, resulting in the discrepancy in adsorption and activation capacities for the reactants, which produces the selectivity of β-keto esters being catalyzed into α-hydroperoxide β-keto esters (ROOH) or to α-hydroxyl β-keto esters (ROH). Density functional theory (DFT) calculations also demonstrate that the adsorption and activation capacities of the metal active centers in M-SATE-CMPs (MZn, Cu and Co) for ROOH are the key factors to influence the photocatalytic selective oxidation of β-keto ester. This study provides a promising strategy for designing a metallaphotoredox catalyst whose photocatalytic selectivity depends on the d-band center of metal site in the catalyst.

Solar Carboxylation Using CO2: Interfacially Synthesized Flexible Covalent Organic Frameworks Film as a Photocatalyst for Highly Selective Solar Carboxylation of Arylamines with CO2

Carbon dioxide (CO2) conversion into value-added chemicals/fuels by utilizing solar energy is a sustainable way to mitigate our dependence on fossil fuels and stimulate a carbon-neutral economy. However, the efficient and affordable conversion of CO2 is still an ongoing challenge. Here, we report an interfacially synthesized visible-light-active Ni(II)-integrated covalent organic frameworks (TaTpBpy-Ni COFs) film as a photocatalyst for efficient CO2 conversion into carboxylic acid under ambient conditions. Notably, the TaTpBpy-Ni COFs film showed excellent photocatalytic activity for the carboxylation of various arylamines with CO2 to the corresponding arylcarboxylic acid via C-N bond activation under solar-light irradiation. Moreover, this carboxylation protocol exhibits mild reaction conditions and good functional group tolerance without the necessity of using stoichiometric metallic reductants. This work shows a benchmark example of not only the interfacially synthesized COFs film used as a photocatalyst for solar-light energy utilization but also the selective solar chemical production system of arylcarboxylic acid directly from CO2.

Redox-Active Organic Materials: From Energy Storage to Redox Catalysis

Electroactive materials are central to myriad applications, including energy storage, sensing, and catalysis. Compared to traditional inorganic electrode materials, redox-active organic materials such as porous organic polymers (POPs) and covalent organic frameworks (COFs) are emerging as promising alternatives due to their structural tunability, flexibility, sustainability, and compatibility with a range of electrolytes. Herein, we discuss the challenges and opportunities available for the use of redox-active organic materials in organoelectrochemistry, an emerging area in fine chemical synthesis. In particular, we highlight the utility of organic electrode materials in photoredox catalysis, electrochemical energy storage, and electrocatalysis and point to new directions needed to unlock their potential utility for organic synthesis. This Perspective aims to bring together the organic, electrochemistry, and polymer communities to design new heterogeneous electrocatalysts for the sustainable synthesis of complex molecules.

Promoting Photocatalytic Direct C-H Difluoromethylation of Heterocycles using Synergistic Dual-Active-Centered Covalent Organic Frameworks

Difluoromethylation reactions are increasingly important for the creation of fluorine-containing heterocycles, which are core groups in a diverse range of biologically and pharmacologically active ingredients. Ideally, this typically challenging reaction could be performed photocatalytically under mild conditions. To achieve this separation of redox processes would be required for the efficient generation of difluoromethyl radicals and the reduction of oxygen. A covalent organic framework photocatalytic material was, therefore, designed with dual reactive centers. Here, anthracene was used as a reduction site and benzothiadiazole was used as an oxidation site, distributed in a tristyryl triazine framework. Efficient charge separation was ensured by the superior electron-donating and -accepting abilities of the dual centers, creating long-lived photogenerated electron-hole pairs. Photocatalytic difluoromethylation of 16 compounds with high yields and remarkable functional group tolerance was demonstrated; compounds included bioactive molecules such as xanthine and uracil. The structure-function relationship of the dual-active-center photocatalyst was investigated through electron spin resonance, femtosecond transient absorption spectroscopy, and density functional theory calculations.

CuCl2/FeCl3 Bimetallic Photocatalyst for Sustainable Ethylene Production from Ethanol via Recoverable Redox Cycles

Photocatalytic conversions of ethanol to valuable chemicals are significant organic synthesis reactions. Herein, we developed a CuCl2/FeCl3 bimetallic photocatalyst for sustainable dehydration of ethanol to ethylene by recoverable redox cycles. The selectivity of ethylene was 98.3% for CuCl2/FeCl3, which is much higher than that of CuCl2 (34.5%) and FeCl3 (86.5%). Due to the ligand-to-metal charge transfer (LMCT) process involved in generating the liquid products, the CuCl2/FeCl3 catalyst will be reduced to CuCl/FeCl2. Oxygen (O2) is required for the recovery of CuCl2/FeCl3 to avoid exhaustion. The soluble Fe3+/Fe2+ redox species deliver catalyst regeneration properties more efficiently than single metal couples, making a series of redox reactions (Cu2+/Cu+, Fe3+/Fe2+, and O2/ethanol couples) recyclable with synergistic effects. A flow reactor was designed to facilitate the continuous production of ethylene. The understanding of bimetallic synergism and consecutive reactions promotes the industrial application process of photocatalytic organic reactions.

Radiation-Assisted Assembly of a Highly Dispersed Nanomolybdenum-Functionalized Covalent Organic Framework

Two-dimensional covalent organic frameworks (2D COFs), featuring a large surface area and 1D pore structure, serve as promising scaffolds for anchoring functional guest compounds, which can significantly enhance their performance and thus expand their potential applications. Postsynthetic strategy for COFs functionalization is versatile but challenging because of their tedious procedure with high time and energy consumption, generation of excess reaction waste, and damage to COF crystallinity. We report in this work a general strategy for the synthesis of inorganic nanocompound-functionalized COF composites in a one-pot way. Specifically, a high-crystallinity nanoscale molybdenum compound is successfully introduced into a COF skeleton with high dispersion in situ during the crystallization process of the COF induced by gamma ray radiation under ambient conditions. The obtained COF@Mo composites exhibit remarkable sorption performance for methylene blue and many other organic dyes in aqueous solution with the advantages of ultrarapid uptake dynamics and high removal efficiency.

Structural Regulation of Covalent Organic Frameworks for Catalysis

ConspectusChemical reactions can be promoted at lower temperatures and pressures, thereby reducing the energy input, by introducing suitable catalysts. Despite its significance, the quest for efficient and stable catalysts remains a significant challenge. In this context, addressing the efficiency of catalysts stands out as a paramount concern. However, the challenges posed by the vague structure and limited tailorability of traditional catalysts would make it highly desirable to fabricate optimized catalysts based on the understanding of structure-activity relationships. Covalent organic frameworks (COFs), a subclass of fully designed crystalline materials formed by the polymerization of organic building blocks through covalent bonds have garnered widespread attention in catalysis. The precise and customizable structures of COFs, coupled with attributes such as high surface area and facile functional modification, make COFs attractive molecular platforms for catalytic applications. These inherent advantages position COFs as ideal catalysts, facilitating the elucidation of structure-performance relationships and thereby further improving the catalysis. Nevertheless, there is a lack of systematic emphasis on and summary of structural regulation at the atomic/molecular level for COF catalysis. Consequently, there is a growing need to summarize this research field and provide deep insights into COF-based catalysis to promote its further development.In this Account, we will summarize recent advances in structural regulation achieved in COF-based catalysts, placing an emphasis on the molecular design of the structures for enhanced catalysis. Considering the unique components and structural advantages of COFs, we present the fundamental principles for the rational design of structural regulation in COF-based catalysis. This Account starts by presenting an overview of catalysis and explaining why COFs are promising catalysts. Then, we introduce the molecular design principle for COF catalysis. Next, we present the following three aspects of the specific strategies for structural regulation of COF-based catalysts: (1) By designing different functional groups and integrating metal species into the organic unit, the activity and/or selectivity can be finely modulated. (2) Regulating the linkage facilitates charge transfer and/or modulates the electronic structure of catalytic metal sites, and accordingly, the intrinsic activity/selectivity can be further improved. (3) By means of pore wall/space engineering, the microenvironment surrounding catalytic metal sites can be modulated to optimize performance. Finally, the current challenges and future developments in the structural regulation of COF-based catalysts are discussed in detail. This Account provides insight into the structural regulation of COF-based catalysts at the atomic/molecular level toward improving their performance, which would provide significant inspiration for the design and structural regulation of other heterogeneous catalysts.

Covalent Organic Frameworks Based Photoenzymatic Nano-reactor for Asymmetric Dynamic Kinetic Resolution of Secondary Amines

Bio-catalysis represents a highly efficient and stereoselective method for the synthesis of valuable chiral compounds, however, the poor stability and limited reaction types of free enzymes restrict their wide application in industrial production. In this work, to overcome these problems, a multifunctional photoenzymatic nanoreactor CALB@COF-Ir was developed through the encapsulation of Candida antarctica lipase B (CALB) in a photosensitive covalent organic framework COF-Ir. This bio-nanocluster serves as efficient catalysts in asymmetric dynamic kinetic resolution (DKR) of secondary amines to give a series of chiral amines in high yields (up to 99 %) and enantioselectivities (up to 99 % ee). The well-designed COF-Ir not only acts as safety cover to prevent CALB from deactivation but promotes racemization of secondary amines via photo-induced hydrogen atom transfer (HAT) process. Photoelectric characterization and TDDFT calculation revealed that (ppy)2Ir units in COF-Ir play crucial role in this photocatalytic system which enhance its photo-redox properties through facilitating the separation between photoelectrons (e-) and holes (h+). Furthermore, the heterogeneous photoenzymatic nanoreactor could be recycled for five rounds with slight decline of catalytic reactivity.

Metal-Coordinated Covalent Organic Frameworks as Advanced Bifunctional Hosts for Both Sulfur Cathodes and Lithium Anodes in Lithium-Sulfur Batteries

The shuttling of polysulfides on the cathode and the uncontrollable growth of lithium dendrites on the anode have restricted the practical application of lithium-sulfur (Li-S) batteries. In this study, a metal-coordinated 3D covalent organic framework (COF) with a homogeneous distribution of nickel-bis(dithiolene) and N-rich triazine centers (namely, NiS4-TAPT) was designed and synthesized, which can serve as bifunctional hosts for both sulfur cathodes and lithium anodes in Li-S batteries. The abundant Ni centers and N-sites in NiS4-TAPT can greatly enhance the adsorption and conversion of the polysulfides. Meanwhile, the presence of Ni-bis(dithiolene) centers enables uniform Li nucleation at the Li anode, thereby suppressing the growth of Li dendrites. This work demonstrated the effectiveness of integrating catalytic and adsorption sites to optimize the chemical interactions between host materials and redox-active intermediates, potentially facilitating the rational design of metal-coordinated COF materials for high-performance secondary batteries.

Single-atom platinum with asymmetric coordination environment on fully conjugated covalent organic framework for efficient electrocatalysis

Two-dimensional (2D) covalent organic frameworks (COFs) and their derivatives have been widely applied as electrocatalysts owing to their unique nanoscale pore configurations, stable periodic structures, abundant coordination sites and high surface area. This work aims to construct a non-thermodynamically stable Pt-N2 coordination active site by electrochemically modifying platinum (Pt) single atoms into a fully conjugated 2D COF as conductive agent-free and pyrolysis-free electrocatalyst for the hydrogen evolution reaction (HER). In addition to maximizing atomic utilization, single-atom catalysts with definite structures can be used to investigate catalytic mechanisms and structure-activity relationships. In this work, in-situ characterizations and theoretical calculations reveal that a nitrogen-rich graphene analogue COF not only exhibits a favorable metal-support effect for Pt, adjusting the binding energy between Pt sites to H* intermediates by forming unique Pt-N2 instead of the typical Pt-N4 coordination environment, but also enhances electron transport ability and structural stability, showing both conductivity and stability in acidic environments.

Amine-functionalized Schiff base covalent organic frameworks supported PdAuIr nanoparticles as high-performance catalysts for formic acid dehydrogenation and hexavalent chromium reduction

Formic acid (FA) holds significant potential as a liquid hydrogen storage medium. However, it is important to improve the reaction rates and extend the practical applications of FA dehydrogenation and Cr(VI) reduction through the development of efficient heterogeneous catalysts. This study reports the synthesis of a uniformly dispersed PdAuIr nanoparticles (NPs) catalyst loaded with amine groups covalent organic frameworks (COFs). The alloyed NPs demonstrated exceptional effectiveness in FA dehydrogenation rate and Cr(VI) reduction. The initial turnover of frequency (TOF) value for FA dehydrogenation without additives was 9970 h-1 at 298 K, the apparent activation energy (Ea) was 30.3 kJ/mol and the rate constant (k) for Cr(VI) reduction was 0.742 min-1. Additionally, it showcased the ability to undergo recycling up to six times with minimal degradation in performance. The results indicate that its remarkable catalytic performance can be attributed primarily to the favorable mass transfer attributes of the aminated COFs supports, the strong metal-support interaction (SMSI), and the synergistic effects among the metals. This study offers a novel perspective on the advancement of efficient and durable heterogeneous catalysts with diverse capabilities, thereby making significant contributions to the fields of energy and environmental preservation.

Nitrogen-Rich Conjugated Microporous Polymers with Improved Cobalt(II) Density for Highly Efficient Electrocatalytic Oxygen Evolution

Developing efficient oxygen evolution catalysts (OECs) made from earth-abundant elements is extremely important since the oxygen evolution reaction (OER) with sluggish kinetics hinders the development of many energy-related electrochemical devices. Herein, an efficient strategy is developed to prepare conjugated microporous polymers (CMPs) with abundant and uniform coordination sites by coupling the N-rich organic monomer 2,4,6-tris(5-bromopyrimidin-2-yl)-1,3,5-triazine (TBPT) with Co(II) porphyrin. The resulting CMP-Py(Co) is further metallized with Co2+ ions to obtain CMP-Py(Co)@Co. Structural characterization results reveal that CMP-Py(Co)@Co has higher Co2+ content (12.20 wt %) and affinity toward water compared with CMP-Py(Co). Moreover, CMP-Py(Co)@Co exhibits an excellent OER activity with a low overpotential of 285 mV vs RHE at 10 mA cm-2 and a Tafel slope of 80.1 mV dec-1, which are significantly lower than those of CMP-Py(Co) (335 mV vs RHE and 96.8 mV dec-1). More interestingly, CMP-Py(Co)@Co outperforms most reported porous organic polymer-based OECs and the benchmark RuO2 catalyst (320 mV vs RHE and 87.6 mV dec-1). Additionally, Co2+-free CMP-Py(2H) has negligible OER activity. Thereby, the enhanced OER activity of CMP-Py(Co)@Co is attributed to the incorporation of Co2+ ions leading to rich active sites and enlarged electrochemical surface areas. Density functional theory (DFT) calculations reveal that Co2+-TBPT sites have higher activity than Co2+-porphyrin sites for the OER. These results indicate that the introduction of rich active metal sites in stable and conductive CMPs could provide novel guidance for designing efficient OECs.

Control over Charge Separation by Imine Structural Isomerization in Covalent Organic Frameworks with Implications on CO2 Photoreduction

Two-dimensional covalent organic frameworks (COFs) are an emerging class of photocatalytic materials for solar energy conversion. In this work, we report a pair of structurally isomeric COFs with reversed imine bond directions, which leads to drastic differences in their physical properties, photophysical behaviors, and photocatalytic CO2 reduction performance after incorporating a Re(bpy)(CO)3Cl molecular catalyst through bipyridyl units on the COF backbone (Re-COF). Using the combination of ultrafast spectroscopy and theory, we attributed these differences to the polarized nature of the imine bond that imparts a preferential direction to intramolecular charge transfer (ICT) upon photoexcitation, where the bipyridyl unit acts as an electron acceptor in the forward imine case (f-COF) and as an electron donor in the reverse imine case (r-COF). These interactions ultimately lead the Re-f-COF isomer to function as an efficient CO2 reduction photocatalyst, while the Re-r-COF isomer shows minimal photocatalytic activity. These findings not only reveal the essential role linker chemistry plays in COF photophysical and photocatalytic properties but also offer a unique opportunity to design photosensitizers that can selectively direct charges.

Selective Integrating Molecular Catalytic Units into Bipyridine-Based Covalent Organic Frameworks for Specific Photocatalytic Fuel Production

Molecular metal compounds have demonstrated excellent catalytic activity and product selectivity in the H2 evolution reaction (HER) and the CO2 reduction reaction (CO2RR). The heterogenization of molecular catalysts is regarded as an effective approach to improve their applicability. In this work, the molecular catalytic units [Cp*Ir(Bpy)Cl]+ and [Ru(Bpy)(CO)2Cl2] are constructed in situ on the bipyridine sites of the covalent organic framework for photocatalytic HER and CO2RR, respectively. Inheriting the impressive performance of molecular catalysts, the functionalized TpBpy-M exhibits excellent catalytic activity and product selectivity. Under visible light irradiation, the H2 production rate of TpBpy-Ir is about 760 μmol g-1 h-1, which is 6.7 times higher than that of TpBpy without built-in catalytic sites. Also, the HCOOH production rate of TpBpy-Ru is 271 μmol g-1 h-1, with an impressive selectivity of 88%. Control experiments validated that this improvement is attributed to the incorporation of molecular catalytic units into the framework. Photoluminescence spectroscopy measurements and theoretical calculation consistently demonstrate that, under illumination, the photosensitizer [Ru(Bpy)3]Cl2 is excited and transfers electrons to the catalytic sites in TpBpy-M, which then catalyzes the reduction of H+ and CO2.

Bottom-Up Construction of Ni(II)-Incorporated Covalent Organic Framework for Metallaphotoredox Catalysis

The construction of an all-in-one catalyst, in which the photosensitizer and the transition metal site are close to each other, is important for improving the efficiency of metallaphotoredox catalysis. However, the development of convenient synthetic strategies for the precise construction of an all-in-one catalyst remains a challenging task due to the requirement of precise installation of the catalytic sites. Herein, we have successfully established a facile bottom-up strategy for the direct synthesis of Ni(II)-incorporated covalent organic framework (COF), named LZU-713@Ni, as a versatile all-in-one metallaphotoredox catalyst. LZU-713@Ni showed excellent activity and recyclability in the photoredox/nickel-catalyzed C-O, C-S, and C-P cross-coupling reactions. Notably, this catalyst displayed a better catalytic activity than its homogeneous analogues, physically mixed dual catalyst system, and, especially, LZU-713/Ni which was prepared through post-synthetic modification. The improved catalytic efficiency of LZU-713@Ni should be attributed to the implementation of bottom-up strategy, which incorporated the fixed, ordered, and abundant catalytic sites into its framework. This work sheds new light on the exploration of concise and effective strategies for the construction of multifunctional COF-based photocatalysts.

Visible Light-Driven Flexible Synthesis of α-Alkylated Glycine Derivatives Catalyzed by Reusable Covalent Organic Frameworks

Herein, we report a heterogeneous visible light-driven preparation of α-alkylated glycine derivatives. This approach employed a β-ketoenamine-linked covalent organic framework (2D-COF-4) as the heterogeneous photocatalyst and N-hydroxy phthalimide (NHPI) esters as the alkyl radical sources. Numerous glycine derivatives, including dipeptides, were precisely and efficiently alkylated under visible light-driven reaction conditions. Based on the excellent photoactivity and organic reaction compatibility of 2D-COF-4, this alkylation could proceed flexibly in a green solvent (ethanol) without any other additives. The photocatalyst and phthalimide were fruitfully recycled with a simple workup procedure, revealing a high ecoscale value and low environmental factor (E-factor).

Accelerated Diffusion of a Copper(I)-Functionalized COF Packed Bed Reactor for Efficient Continuous Flow Catalysis

Flow chemistry provides a neo-orientation for the research and development of chemical technology, in which heterogeneous continuous catalysis based on packed beds can realize rapid separation and recycling. However, options for heterogeneous catalysts are still limited. In this work, we gradually grow covalent organic frameworks (COFs, TpBpy) on the surface of a silica gel (SiO2)-supported substrate to obtain a stable copper(I)-chelated high-loading heterogeneous catalyst (SiO2@CuI-TpBpy). SiO2@CuI-TpBpy shows high catalytic activity in three-component Huisgen 1,3-dipolar cycloaddition, giving the corresponding triazoles with excellent yields and reposeful recyclability under batch conditions. The structures of the catalysts remain steady, and the copper contents are basically unchanged after five cycles. Then, the catalysts are successfully applied for three-component heterogeneous catalysis in a one-pot continuous flow to prepare rufinamide in 89% yield for 24 h stably and efficiently with mere traces of copper ions remaining. More importantly, the catalytic system reveals a minuscule effect of catalyst particle size on internal diffusion. This COF encapsulation strategy presents a new possibility for the design of industrial heterogeneous catalysts with high metal loading and low internal diffusion resistance.

Construction of a conjugated covalent organic framework for iodine capture

Radioactive iodine in the nuclear field is considered very dangerous nuclear waste because of its chemical toxicity, high mobility and long radioactive half-life. Herein, a conjugated two-dimensional covalent organic framework, TPB-TMPD-COF, has been designed and synthesized for iodine capture. TPB-TMPD-COF has been well characterized by several techniques and showed long order structure and a large surface area (1090 m2 g-1). Moreover, TPB-TMPD-COF shows a high iodine capture value at 4.75 g g-1 under 350 K and normal pressure conditions, benefitting from the increased density of adsorption sites. By using multiple techniques, the iodine vapor adsorbed into the pores may readily generate the electron transfer species (I3- and I5-) due to the strong interactions between imine groups and iodine molecules, which contributes to the high iodine uptake for TPB-TMPD-COF. Our study will stimulate the design and synthesis of COFs as a solid-phase adsorbent for iodine uptake.

Single Ru Sites on Covalent Organic Framework-Coated Carbon Nanotubes for Highly Efficient Electrocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) with precisely controllable structures and highly ordered porosity possess great potential as electrocatalysts for hydrogen evolution reaction (HER). However, the catalytic performance of pristine COFs is limited by the poor active sites and low electron transfer. Herein, to address these issues, the conductive carbon nanotubes (CNTs) are coated by a defined structure RuBpy(H2 O)(OH)Cl2 in bipyridine-based COF (TpBpy). And this composite with single site Ru incorporated can be used as HER electrocatalyst in alkaline conditions. A series of crucial issues are carefully discussed through experiments and density functional theory (DFT) calculations, such as the coordination structure of the atomically dispersion Ru ions, the catalytic mechanism of the embedded catalytic site, and the effect of COF and CNTs on the electrocatalytic properties. According to DFT calculations, the embedded single sites Ru act as catalytic sites for H2 generation. Benefitting from increasing the catalyst conductivity and the charge transfer, the as-prepared c-CNT-0.68@TpBpy-Ru shows an excellent HER overpotential of 112 mV at 10 mA cm-2 under alkaline conditions as well as an excellent durability up to 12 h, which is superior to that of most of the reported COFs electrocatalysts in alkaline solution.

A Spirobifluorene-Based Covalent Organic Framework for Dual Photoredox and Nickel Catalysis

Covalent organic frameworks (COFs) have emerged as tunable, crystalline, and porous functional organic materials, but their application in photocatalysis has been limited by rapid excited-state quenching. Herein, we report the first example of dual photoredox/nickel catalysis by an sp2 carbon-conjugated spirobifluorene-based COF. Constructed from spirobifluorene and nickel-bipyridine linkers, the NiSCN COF adopted a two-dimensional structure with staggered stacking. Under light irradiation, NiSCN catalyzed amination and etherification/esterification reactions of aryl halides through the photoredox mechanism, with a catalytic efficiency more than 23-fold higher than that of its homogeneous control. NiSCN was used in five consecutive reactions without a significant loss of catalytic activity.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Covalent organic frameworks bearing Ni active sites for free radical-mediated photoelectrochemical organic transformations

Photoelectrochemical (PEC) organic transformations occurring at anodes are a promising strategy for circumventing the sluggish kinetics of the oxygen evolution reaction. Here, we report a free radical-mediated reaction instead of direct hole transfer occurring at the solid/liquid interface for PEC oxidation of benzyl alcohol (BA) to benzaldehyde (BAD) with high selectivity. A bismuth vanadate (BiVO4) photoanode coated with a 2,2'-bipyridine-based covalent organic framework bearing single Ni sites (Ni-TpBpy) was developed to drive the transformation. Experimental studies reveal that the reaction at the Ni-TpBpy/BiVO4 photoanode followed first-order reaction kinetics, boosting the formation of surface-bound ·OH radicals, which suppressed further BAD oxidation and provided a nearly 100% selectivity and a rate of 80.63 μmol hour-1 for the BA-to-BAD conversion. Because alcohol-to-aldehyde conversions are involved in the valorizations of biomass and plastics, this work is expected to open distinct avenues for producing key intermediates of great value.

Embedding Hydrogen Atom Transfer Moieties in Covalent Organic Frameworks for Efficient Photocatalytic C-H Functionalization

Covalent organic frameworks (COFs) have emerged as efficient heterogeneous photocatalysts for a wide range of relatively simple organic reactions, whereas their application in complex organic transformations, like site-selective functionalization of unactivated C-H bonds, is underexplored, which can be mainly attributed to the lack of highly active organophotocatalytic cores. Herein through bonding oxygen atoms at the N-terminus of quinolines in nonsubstituted quinoline-linked COFs (NQ-COFs), we successfully realized the embedding of active hydrogen atom transfer (HAT) moieties into the skeleton of COFs. This novel designed COF (NQ-COFE5 -O), serving as both an excellent photosensitizer and HAT catalyst, exhibited much higher efficiency in C-H functionalization than the corresponding NQ-COFE5 . Specially, we evaluated the photocatalytic performance of NQ-COFE5 -O on ten different substrates, including quinolines, benzothiazole, and benzoxazole, all of which were transferred to desired products in moderate to high yields (up to 93 %). Furthermore, the as-synthesized NQ-COFE5 -O displayed excellent photostability and could be reused with negligible loss of activity for five catalytic cycles.

Diaryl Dihydrophenazine-Based Porous Organic Polymers Enhance Synergistic Catalysis in Visible-Light-Driven Organic Transformations

Porous organic polymers (POPs) have emerged as a novel class of porous materials that are synthesized by the polymerization of various organic monomers with different geometries and topologies. The molecular tunability of organic building blocks allows the incorporation of functional units for photocatalytic organic transformations. Here, we report the synthesis of two POP-based photocatalysts via homopolymerization of vinyl-functionalized diaryl dihydrophenazine (DADHP) monomer (POP1) and copolymerization of vinyl-functionalized DADHP and 2,2'-bipyridine monomers (POP2). The fluorescence lifetimes of DADHP units in the POPs significantly increased, resulting in enhanced photocatalytic performances over homogeneous controls. POP1 is highly effective in catalysing visible-light-driven C-N bond forming cross-coupling reactions. Upon coordination with Ni2+ ions, POP2-Ni shows strong synergy between photocatalytic and Ni catalytic cycles due to the confinement effect within the POP framework, leading to high efficiency in energy, electron, and organic radical transfer. POP2-Ni displays excellent activity in catalysing C-P bond forming reactions between diarylphosphine oxides and aryl iodides. They increased the photocatalytic activities by more than 30-fold in C-N and C-P cross-coupling reactions. These POP catalysts were readily recovered via centrifugal separation and reused in six catalytic cycles without loss of activities. Thus, photosensitizer-based POPs provide a promising platform for heterogeneous photocatalytic organic transformations.

Enhancing the Iodine Adsorption Capacity of Pyrene-Based Covalent Organic Frameworks by Regulating the Pore Environment

Regulating of pore environment is an efficient way to improve the performance of covalent organic frameworks (COFs) for specific application requirements. Herein, the design and synthesis of two pyrene-based 2D COFs with -H or -Me substituents, TFFPy-PPD-COF and TFFPy-TMPD-COF are reported. Both of them show long order structure and high porosity, in which TFFPy-PPD-COF displays a larger pore volume and bigger BET surface area (2587 m2 g-1 , 1.17 cm3 g-1 ). Interestingly, TFPPy-TMPD-COF exhibits a much higher vapor iodine capacity (4.8 g g-1 ) than TFPPy-PPD-COF (2.9 g g-1 ), in contrast to their pore volume size. By using multiple techniques, the better performance of TFPPy-TMPD-COF in iodine capture is ascribed to the altered pore environment by introducing methyl groups, which contributes to the formation of polyiodide anions and enhances the interactions between the frameworks and iodine. These results will be helpful for understanding the effect of pore environment in COFs for iodine uptake and constructing novel structure with high iodine capture performance.

Post-synthetic modifications of covalent organic frameworks (COFs) for diverse applications

Covalent organic frameworks (COFs) are porous and crystalline organic polymers, which have found usage in various fields. These frameworks are tailorable through the introduction of diverse functionalities into the platform. Indeed, functionality plays a key role in their different applications. However, sometimes functional groups are not compatible with reaction conditions or can compete and interfere with other groups of monomers in the direct synthetic method. Also, pre-synthesis of bulky moieties in COFs can negatively affect crystal formation. To avoid these problems a post-synthetic modification (PSM) approach is a helpful tactic. Also, with the assistance of this strategy porous size can be tunable and stability can be improved without considerable effect on the crystallite. In addition, conductivity, hydrophobicity/ hydrophilicity, and chirality are among the features that can be reformed with this method. In this review, different types of PSM strategies based on recent articles have been divided into four categories: (i) post-functionalization, (ii) post-metalation, (iii) chemical locking, and (iv) host-guest post-modifications. Post-functionalization and chemical locking methods are based on covalent bond formation while in post-metalation and host-guest post-modifications, non-covalent bonds are formed. Also, the potential of these post-modified COFs in energy storage and conversion (lithium-sulfur batteries, hydrogen storage, proton-exchange membrane fuel cells, and water splitting), heterogeneous catalysts, food safety evaluation, gas separation, environmental domains (greenhouse gas capture, radioactive element uptake, and water remediation), and biological applications (drug delivery, biosensors, biomarker capture, chiral column chromatography, and solid-state smart nanochannels) have been discussed.

Gradually Tuning the Flexibility of Two-Dimensional Covalent Organic Frameworks via Stepwise Structural Transformation and Their Flexibility-Dependent Properties

Flexible covalent organic frameworks (COFs) are intriguing for their dynamic properties distinctive from rigid counterparts but still suffer from limited accessibility. Especially, controlling flexibility of COFs is challenging and the impact of different flexibility on properties of COFs has rarely been unveiled. This article reports stepwise adjustment on flexibility of two-dimensional COFs, which is realized by the designed synthesis of rigid COF (R-COF), semi-flexible COF (SF-COF), and flexible COF (F-COF) through polymerization, linker exchange, and linkage conversion with a newly developed method for reduction of hydrazone, respectively. Significant difference in breathing behavior and self-adaptive capability of the three COFs are uncovered through vapor response and iodine capture experiments. Gas sorption experiments indicate that the porosity of F-COF could switch from "close" state in nitrogen to "open" state in carbon dioxide, which are not observed for R-COF and SF-COF. This study not only develops a strategy to adjust the flexibility of COFs by tuning their linkers and linkages, but also provides a deep insight into the impact of different flexibility on properties of COFs, which lays a foundation for the development of this new class of dynamic porous materials.

Single Site Coordination Enabled Construction of Metal-Diketimine-Linked Covalent Organic Frameworks for Boosted Electrooxidation of Biomass Derivative

Aromatic aldehydes are widely used for the construction of covalent organic frameworks (COFs). However, due to the high flexibility, high steric hindrance, and low reactivity, it remains challenging to synthesize COFs using ketones as building units, especially the highly flexible aliphatic ones. Here, the single nickel site coordination strategy is reported to lock the configurations of the highly flexible diketimine to transform discrete oligomers or amorphous polymers into highly crystalline nickel-diketimine-linked COFs (named as Ni-DKI-COFs). The strategy has been successfully extended to the synthesis of a series of Ni-DKI-COFs by the condensation of three flexible diketones with two tridentate amines. Thanks to the ABC stacking model with high amount and easily accessible single nickel (II) sites on their 1D channels, Ni-DKI-COFs are exploited as well-defined electrocatalyst platforms for efficiently electro-upgrading biomass-derived 5-Hydroxymethylfurfural (HMF) into value-added 2,5-furandicarboxylic acid (FDCA) with a 99.9% yield and a 99.5% faradaic efficiency as well as a high turnover frequency of 0.31 s-1 .

A π-conjugated covalent organic framework enables interlocked nickel/photoredox catalysis for light-harvesting cross-coupling reactions

Covalent organic frameworks (COFs) are an outstanding platform for heterogeneous photocatalysis. Herein, we synthesized a pyrene-based two-dimensional C[double bond, length as m-dash]C linked π-conjugated COF via Knoevenagel condensation and anchored Ni(ii)-centers through bipyridine moieties. Instead of traditional dual metallaphotoredox catalysis, the mono-metal decorated Ni@Bpy-sp2c-COF interlocked the catalysis mediated by light and the transition metal. Under light irradiation, enhanced energy and electron transfer in the COF backbone, as delineated by the photoluminescence, electrochemical, and control experiments, expedited the excitation of Ni centers to efficiently catalyze diverse photocatalytic C-X (X = B, C, N, O, P, S) cross-coupling reactions with efficiencies orders of magnitude higher than the homogeneous controls. The COF catalyst tolerated a diverse range of coupling partners with various steric and electronic properties, delivering the products with up to 99% yields. Some reactions were performed on a gram scale and were applied to diversify pharmaceuticals and complex molecules to demonstrate the synthetic utility.

Synthesis of sp2 Carbon-Conjugated Covalent Organic Framework Thin-Films via Copper-Surface-Mediated Knoevenagel Polycondensation

sp2 carbon-conjugated covalent organic framework (sp2 c-COF) featured with high π-conjugation, high chemical stabilities, and designable chemical structures, are thus promising for applications including adsorption and separation, optoelectronic devices, and catalysis. For the most of these applications, large-area and continuous films are required. However, due to the needs of harsh conditions in the formation of CC bonds, classical interfacial methodologies are challenged in the synthesis of sp2 c-COFs films. Herein, a novel and robust interfacial method namely copper-surface-mediated Knoevenagel polycondensation (Cu-SMKP), is shown for scalable synthesis of sp2 c-COF films on various Cu substrates. Using this approach, large-area and continuous sp2 c-COF films could be prepared on various complicated Cu surfaces with thickness from tens to hundreds of nanometers. The resultant sp2 c-COF films on Cu substrate could be used directly as functional electrode for extraction of uranium from spiked seawater, which gives an exceptionally uptake capacity of 2475 mg g-1 . These results delineate significant synthetic advances in sp2 c-COF films and implemented them as functional electrodes for uranyl capture.

Asymmetric gradient orbital interaction of hetero-diatomic active sites for promoting C - C coupling

Diatomic-site catalysts (DACs) garner tremendous attention for selective CO₂ photoreduction, especially in the thermodynamical and kinetical mechanism of CO₂ to C₂₊ products. Herein, we first engineer a novel Zn-porphyrin/RuCu-pincer complex DAC (ZnPor-RuCuDAC). The heteronuclear ZnPor-RuCuDAC exhibits the best acetate selectivity (95.1%), while the homoatomic counterparts (ZnPor-Ru₂DAC and ZnPor-Cu₂DAC) present the best CO selectivity. In-situ spectroscopic measurements reveal that the heteronuclear Ru-Cu sites easily appear C₁ intermediate coupling. The in-depth analyses confirm that due to the strong gradient orbital coupling of Ru4d-Cu3d resonance, two formed ^*CO intermediates of Ru-Cu heteroatom show a significantly weaker electrostatic repulsion for an asymmetric charge distribution, which result from a side-to-side absorption and narrow dihedral angle distortion. Moreover, the strongly overlapped Ru/Cu-d and CO molecular orbitals split into bonding and antibonding orbitals easily, resulting in decreasing energy splitting levels of C₁ intermediates. These results collectively augment the collision probability of the two ^*CO intermediates on heteronuclear DACs. This work first provides a crucial perspective on the symmetry-forbidden coupling mechanism of C₁ intermediates on diatomic sites.

Recent Progress of Covalent Organic Frameworks Applied in Electrochemical Sensors

As an emerging porous crystalline organic material, the covalent organic frameworks (COFs) are given more and more attention in many fields, such as gas storage and separation, catalysis, energy storage and conversion, luminescent devices, drug delivery, pollutant adsorption and removal, analysis and detection due to their special advantages of high crystallinity, flexible designability, controllable porosities and topologies, intrinsic chemical and thermal stability. In recent years, the COFs are applied in analytical chemistry, for instance, chromatography, solid-phase microextraction, luminescent and colorimetric sensing, surface-enhanced Raman scattering and electroanalytical chemistry. The COFs decorated electrodes show high performance for detecting trace substances with remarkable selectivity and sensitivity, such as heavy metal ions, glucose, hydrogen peroxide, drugs, antibiotics, explosives, phenolic compounds, pesticides, disease metabolites and so on. This review mainly summarized the application of COF based electrochemical sensor according to different target analytes.

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis

Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts.

Linker Exchange as Facile Method for Post-Synthetic Modification of β-Ketoenamine-linked Covalent Organic Frameworks

Post-synthetic linker exchange performed on covalent organic frameworks (COFs) has become an important method to introduce functional building blocks into their backbone and thus to tune their chemical and physical properties. However, the linker exchange method has so far only been described for COFs with relatively weak linkages like imines. Herein, it is shown that this method can be also used for a post-synthetic linker exchange reaction on a β-ketoenamine linked COF. The time needed to achieve considerable linker exchange is much prolonged compared to other COFs with less stable linkages, however, this enables to achieve very good control on the ratio of the respective building blocks within the framework.

Blue Light Irradiated Metal-, Oxidant-, and Base-Free Cross-Dehydrogenative Coupling of C(sp2)-H and N-H Bonds: Amination of Naphthoquinones with Amines

Herein, we report a blue-light-driven amination of C(sp²)-H bond of naphthoquinones and quinones with the N-H bond of primary and secondary amines for the synthesis of 2-amino-naphthoquinones and 2-amino-quinones. The coupling of naphthoquinones with a wide array of aliphatic, aromatic, chiral, primary, and secondary amines having electron donating (-CH₃, -OCH₃, -SCH₃), withdrawing (-F, -Cl, -Br, -I), and CO₂H, -OH, -NH₂ groups with acidic protons selectively occurred to afford C-N coupled 2-amino-naphthoquinones in 60-99% yields and hydrogen gas as a byproduct in methanol solvent without using any additional reagents, additives, and oxidant under the blue light irradiation. Mechanistic insight by DFT computation, controlled experiments, kinetic isotopic effect, and substitution effect of the substrates suggest that the reaction proceeds by radical pathway in which naphthoquinone forms a highly oxidizing naphthoquinonyl biradical upon irradiation of blue light (457 nm). Consequently, electron transfer from electron-rich amine to an oxidizing naphthoquinonyl biradical leads to a naphthoquinonyl radical anion and aminyl radical cation, followed by proton transfer and delocalization leading to a carbon-centered naphthoquinonyl radical. The cross-coupling of naphthoquinonyl carbon-centered and aminyl nitrogen radicals forms a C-N bond, with subsequent elimination of hydrogen gas (which was also confirmed by GC-TCD), affording 2-amino-1,4-naphthoquinone under metal-, reagent-, base-, and oxidant-free conditions.

Dangling bond formation on COF nanosheets for enhancing sensing performances

Dangling bond formation for COF materials in a rational manner is an enormous challenge, especially through post-treatment which is a facile strategy while has not been reported yet. In this work, a "chemical scissor" strategy is proposed for the first time to rationally design dangling bonds in COF materials. It is found that Zn²⁺ coordination in post-metallization of TDCOF can act as an "inducer" which elongates the target bond and facilitates its fracture in hydrolyzation reactions to create dangling bonds. The number of dangling bonds is well-modulated by controlling the post-metallization time. Zn-TDCOF-12 shows one of the highest sensitivities to NO₂ in all reported chemiresistive gas sensing materials operating under visible light and room temperature. This work opens an avenue to rationally design a dangling bond in COF materials, which could increase the active sites and improve the mass transport in COFs to remarkably promote their various chemical applications.

Photocatalytic CO2 reduction using La-Ni bimetallic sites within a covalent organic framework

The precise construction of photocatalysts with diatomic sites that simultaneously foster light absorption and catalytic activity is a formidable challenge, as both processes follow distinct pathways. Herein, an electrostatically driven self-assembly approach is used, where phenanthroline is used to synthesize bifunctional LaNi sites within covalent organic framework. The La and Ni site acts as optically and catalytically active center for photocarriers generation and highly selective CO₂-to-CO reduction, respectively. Theory calculations and in-situ characterization reveal the directional charge transfer between La-Ni double-atomic sites, leading to decreased reaction energy barriers of *COOH intermediate and enhanced CO₂-to-CO conversion. As a result, without any additional photosensitizers, a 15.2 times enhancement of the CO₂ reduction rate (605.8 μmol·g^-1·h^-1) over that of a benchmark covalent organic framework colloid (39.9 μmol·g^-1·h^-1) and improved CO selectivity (98.2%) are achieved. This work presents a potential strategy for integrating optically and catalytically active centers to enhance photocatalytic CO₂ reduction.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

2D Covalent Organic Frameworks Based on Heteroacene Units

Covalent organic frameworks (COFs) are a unique new class of porous materials that arrange building units into periodic ordered frameworks through strong covalent bonds. Accompanied with structural rigidity and well-defined geometry, heteroacene-based COFs have natural advantages in constructing COFs with high stability and crystallinity. Heteroacene-based COFs usually have high physical and chemical properties, and their extended π-conjugation also leads to relatively low energy gap, effectively promoting π-electron delocalization between network units. Owing to excellent electron-withdrawing or -donating ability, heteroacene units have incomparable advantages in the preparation of donor-acceptor type COFs. Therefore, the physicochemical robust and fully conjugated heteroacene-based COFs solve the problem of traditional COFs lacking π-π interaction and chemical stability. In recent years, significant breakthroughs are made in this field, the choice of various linking modes and building blocks has fundamentally ensured the final applications of COFs. It is of great significance to summarize the heteroacene-based COFs for improving its complexity and controllability. This review first introduces the linkages in heteroacene-based COFs, including reversible and irreversible linkages. Subsequently, some representative building blocks are summarized, and their related applications are especially emphasized. Finally, conclusion and perspectives for future research on heteroacene-based COFs are presented.