Assembly-Induced Enhancement of Cu Nanoclusters Luminescence with Mechanochromic Property

Superstructures of copper nanoclusters as NIR TADF emitters: solvent-dependent optical and morphological modulation

Herein, we report 2-mercaptopyridine-templated copper nanoclusters (CuNCs) which display near infra-red (NIR) emission, both in the solid and colloidal states. Interestingly, the NIR emission can be modulated to orange emission by preparing the CuNCs in a mixed solvent system of chloroform and methanol instead of water. The drastic change in the photo-physical properties of the CuNCs when prepared in two different solvent systems is accompanied by a unique morphological tuning. Further studies reveal that the strong NIR emission is the result of thermally activated delayed fluorescence (TADF) which is confirmed by the long excited state lifetime (∼4 μs at room temperature), time resolved emission spectroscopy (TRES) measurements, temperature-dependent photoluminescence studies, temperature-dependent lifetime studies, and excitation-transmittance dependent TRES intensity measurements. The CuNCs exhibit an exceptionally small singlet-triplet energy gap of 58.2 meV, indicating a highly efficient TADF in the system. Moreover, the solvent-dependent morphological tuning of the nanocluster superstructures rendering a drastic change in the photo-physical signatures is the consequence of different ΔE(S1-T1) values for the CuNCs in different solvent environments. Further findings corroborate that the electronic structure of the surface ligands can also help us to tune the ΔE(S1-T1) energy gap for these nanoclusters.

Interfacial Hydrogen-Bond Interactions Driven Assembly toward Polychromatic Copper Nanoclusters

Constructing versatile metal nanoclusters (NCs) assemblies through noncovalent weak interactions between inter-ligands is a long-standing challenge in interfacial chemistry, while compelling interfacial hydrogen-bond-driven metal NCs assemblies remain unexplored so far. Here, the study reports an amination-ligand o-phenylenediamine-coordinated copper NCs (CuNCs), demonstrating the impact of interfacial hydrogen-bonds (IHBs) motifs on the luminescent behaviors of metal NCs as the alteration of protic solvent. Experimental results supported by theoretical calculation unveil that the flexibility of interfacial ligand and the distance of cuprophilic CuI···CuI interaction between intra-/inter-NCs can be tailored by manipulating the cooperation between the diverse IHBs motifs reconstruction, therewith the IHBs-modulated fundamental structure-property relationships are established. Importantly, by utilizing the IHBs-mediated optical polychromatism of aminated CuNCs, portable visualization of humidity sensing test-strips with fast response is successfully manufactured. This work not only provides further insights into exploring the interfacial chemistry of NCs based on inter-ligands hydrogen-bond interactions, but also offers a new opportunity to expand the practical application for optical sensing of metal NCs.

Luminescent metal nanoclusters and their application in bioimaging

Owing to their unique optical properties and atomically precise structures, metal nanoclusters (MNCs) constitute a new generation of optical probe materials. This mini-review provides a brief overview of luminescence mechanisms and modulation methods of luminescent metal nanoclusters in recent years. Based on these photophysical phenomena, the applications of cluster-based optical probes in optical bioimaging and related sensing, disease diagnosis, and treatment are summarized. Some challenges are also listed at the end.

Controllable fabrication of high-quantum-yield bimetallic gold/silver nanoclusters as multivariate sensing probe for Hg2+, H2O2, and glutathione based on AIE and peroxidase mimicking activity

The grave threat posed by heavy metals and food hazards has increased the urgency of rapid and precise detection for food security and human health. Efficient multivariate sensing probes are imperatively required for sensing heavy metals and tumor markers, which are still facing great challenge in terms of multi-functional integration. Here, bimetallic gold-silver nanoclusters (NG-AuAgNCs) were developed with unique aggregation-induced-emission (AIE) property and peroxidase (POD) mimicking activity towards the efficient multivariate sensing via optimization of the precursors. The NG-AuAgNCs emitted at 614 nm and enable AIE feature with lifetime of 12.61 μs and high quantum yield of 40.5%. Possessing AIE and POD activity, the NG-AuAgNCs show great potential as fluorimetric and colorimetric dual-mode probe for multivariate sensing Hg2+, H2O2 and GSH, with good recoveries in real samples. The NG-AuAgNCs paper sensors further integrating with smartphone, achieved portable detection of Hg2+ with limit of detection (LOD) of 19 nM, while the colorimetric-mode presented consecutive response to H2O2 and GSH via a reversible oxidase tetramethylbenzidine process with LODs of 7.02 and 0.45 μM, respectively. This work not only demonstrates a multivariate probe for environment and human health, but also provides valuable insights for the function integration of the nanocluster via synthetic manipulation.

Amorphous Nanobelts for Efficient Electrocatalytic Ammonia Production

One-dimensional (1D) amorphous nanomaterials combine the advantages of high active site concentration of amorphous structure, high specific surface area and efficient charge transfer of 1D materials, so they present promising opportunities for catalysis. However, how to achievie the balance between the high orientation of 1D morphology and the isotropy of amorphous structure is a significant challenge, which severely obstructs the controllable preparation of 1D amorphous materials. Guided by the hard-soft acids-bases theory, here we develop a general strategy for preparing 1D amorphous nanomaterials through the precise modulation of bond strength between metal ions and organic ligands for a moderated fastness. The soft base dodecanethiol (DT) is multifunctionally served as both structure-regulating agent and morphology-directing agent. Compared with the borderline acids (e.g. Fe2+, Co2+, Ni2+) to construct amorphous structure, soft acid of Cu+ which produced crystalline nanobelts can still be amorphized by reducing the hardness of Cu ions through redox reaction to weak Cu-SR bond. Due to the combined advantages of amorphous structure and one-dimensional morphology, amorphous CuDT nanobelts exhibited excellent electrocatalytic activity in electrochemical nitrate reduction, outperformed most of the reported Cu-based catalysts. This work will effectively bridge the gap between traditional 1D crystalline nanomaterials synthesis and their amorphization preparation.

White Light Emission from Zn(II) and DMSO-Induced Copper Nanocluster Assembly

An assembly of metal nanoclusters driven by appropriate surface ligands and solvent environment may engender entirely new photoluminescence (PL). Herein, we first synthesize histidine (His) stabilized copper nanoparticles (CuNPs) and, subsequently, copper nanoclusters (CuNCs) from it using 3-mercaptopropionic acid (MPA) as an etchant. The CuNCs originally emit bluish-green (λem=470 nm) PL with a low quantum yield (QY∼1.8 %). However, it transformed into a dual-emissive nanocluster assembly (Zn-CuNCs) in the presence of Zn(II) salt, having a distinct blue emission band (λem=420 nm) and a red emission band (λem=615 nm) with eight times QY (∼9.1 %) enhancement. The temperature-dependent emission spectra of Zn-CuNCs depicted that the blue emission band persists for all the temperature ranges (0-80 °C) while the red emission band vanishes at high temperatures (70-80 °C). Thus, the blue emission may originate from the locally excited state (LES) emission of the nanoclusters, while the red emission originates from through-space interaction (TSI) and Cu(I)…Cu(I) interaction within the assembly. Adding dimethyl sulfoxide (DMSO) further modifies the emission intensities; the red band was amplified four times, while the blue band was diminished by 2.5 times. The transmission electron microscopy (TEM) images unveiled that the Zn-CuNCs are a large assembly of tiny nanoclusters, which become more compact in DMSO. The blue emission possesses steady-state fluorescence anisotropy, while the red emission shows no anisotropy. Further, near-perfect white light emission(WLE) was rendered with CIE coordinates of (0.33, 0.32) by combining the dual emission of the Zn-CuNCs with the original green emission of the CuNCs.

Multicolor photoluminescence of Cu14 clusters modulated using surface ligands

Copper nanoclusters exhibit unique structural features and their molecular assembly results in diverse photoluminescence properties. In this study, we present ligand-dependent multicolor luminescence observed in a Cu14 cluster, primarily protected by ortho-carborane-9,12-dithiol (o-CBDT), featuring an octahedral Cu6 inner kernel enveloped by eight isolated copper atoms. The outer layer of the metal kernel consists of six bidentate o-CBDT ligands, in which carborane backbones are connected through μ3-sulphide linkages. The initially prepared Cu14 cluster, solely protected by six o-CBDT ligands, did not crystallize in its native form. However, in the presence of N,N-dimethylformamide (DMF), the cluster crystallized along with six DMF molecules. Single-crystal X-ray diffraction (SCXRD) revealed that the DMF molecules were directly coordinated to six of the eight capping Cu atoms, while oxygen atoms were bound to the two remaining Cu apices in antipodal positions. Efficient tailoring of the cluster surface with DMF shifted its luminescence from yellow to bright red. Luminescence decay profiles showed fluorescence emission for these clusters, originating from the singlet states. Additionally, we synthesized microcrystalline fibers with a one-dimensional assembly of DMF-appended Cu14 clusters and bidentate DPPE linkers. These fibers exhibited bright greenish-yellow phosphorescence emission, originating from the triplet state, indicating the drastic surface tailoring effect of secondary ligands. Theoretical calculations provided insights into the electronic energy levels and associated electronic transitions for these clusters. This work demonstrated dynamic tuning of the emissive excited states of copper nanoclusters through the efficient engineering of ligands.

Molecular Packing-Driven Manipulation of Aggregation Induced Emission in Gold Nanoclusters

A key limitation of supramolecular force-driven molecular assembly in aggregation-induced emission (AIE) materials is the need to precisely regulate molecular interactions within the assembly. Achieving such assemblies with in situ manipulable molecular arrangements could provide valuable insights into the role of molecular forces in AIE. Herein, by using glutathione-protected gold nanoclusters (AuNCs) as a model AIE material and a naturally occurring polyphenol, tannic acid (TA), as the assembling agent, we demonstrate that assemblies dominated by covalent bonds and hydrogen bonding show enhanced AIE, while those dominated by π-π stacking promote charge transfer, resulting in significant photoluminescence (PL) quenching. This phenomenon primarily stems from the oxidation of TA into smaller aromatic ring structures, leading to an increase in π-π interactions. The complete in situ oxidation of TA within the assembly induces a morphological transition from 3-D spherical to 2-D sheet-like structures due to the dominance of π-π interactions, consequently resulting in complete PL quenching of AuNCs. These findings highlight the critical role of molecular packing in modulating the AIE properties of AuNCs.

Cu superparticle-based aggregation induced enhancement strategy with PVDF-HFP/CeVO4 NP sensing interface for miR-103a detection

Aggregation-induced emission (AIE) has been widely used in research on electrochemiluminescence (ECL) due to its excellent luminescence intensity. In this work, copper superparticles (Cu SPs) were used to construct ECL biosensor to detect the microRNA-103a (miRNA-103a) in triple-negative breast cancer (TNBC) tumor tissues. Firstly, GSH-capped copper clusters were used as precursors to prepare Cu SPs by the AIE effect. Compared with clusters, Cu SPs possessed higher luminescence performance and energy stability, making them an ideal choice for ECL nanoprobe. The film of PVDF-HFP/CeVO4 NPs was constructed and modified with CPBA and GSH as the sensing interface (PCCG). The PCCG film displayed good conductivity and hydrophilicity, and desirable mechanical stability. Moreover, the PCCG film can induce high carrier mobility rates and dissociate large amounts of the co-reactant K2S2O8 to enhance the ECL intensity of Cu SPs. As a result, the prepared ECL sensor with the catalyzed hairpin assembly (CHA) strategy was employed to quantify miRNA-103a in the range of 100 fM to 100 nM. The biosensor provided a novel analytical approach for the clinical diagnosis of TNBC.

Triple-Phosphorescent Gold Nanoclusters Enabled by Isomerization of Terminal Thiouracils in the Surface Motifs

Metal nanoclusters (NCs) hold great promise for expressing multipeak emission based on their well-defined total structure with diverse luminescent centers. Herein, we report the surface motif-dictated triple phosphorescence of Au NCs with dynamic color turning. The deprotonation-triggered isomerization of terminal thiouracils can evolve into a mutual transformation among their hierarchical motifs, thus serving a multipeak-emission expression with good tailoring. More importantly, the underlying electron transfer is thoroughly identified by excluding the radiative and nonradiative energy transfer, where electrons flow from the first phosphorescent state to the last two ones. The findings shed light on finely tailing motifs at the molecular level to motivate studies on customizable luminescence characteristics of metal NCs.

The interplay of chromophore-spacer length in light-induced gold nanocluster self-assembly

The light-induced self-assembly of chromophore-tethered precision nanoclusters (NCs) has recently received significant attention due to their facile control over structure, function, and reversibility under ambient conditions. However, the magnitude of assembly depends on the photoswitching efficiency, chemical structure, and proximity of the chromophore to the NC surface. Herein, using azobenzene alkyl monothiol (AMT)-capped gold NCs with two different spacer lengths (denoted as C3-NC and C9-NC), we show that reversible cis ↔ trans isomerization efficiency can be readily tuned to control the self-assembly kinetics of NCs. Irrespective of the chain length, the time required for trans-to-cis (140 s) and cis-to-trans (260 s) isomerization of individual C3-AMT and C9-AMT is identical in dichloromethane solution. When a similar experiment was performed using a solution of C3-NCs and C9-NCs, it resulted in self-assembled disc-like superstructures. Notably, the trans-to-cis photoswitching in C3-NC could reach only 65% even after 460 seconds of irradiation. On the other hand, C9-NC completed this process within 160 seconds of irradiation. The low photoswitching efficiency of the C3-NC analog is due to the short and rigid spacer length of C3-AMT ligands, which are in close proximity to the NC surface, resulting in steric hindrance experienced at the NC-chromophore interface. Importantly, the slow photoswitching in C3-NCs helps isolate and investigate the intermediates of assembly. Using high-resolution electron microscopy, atomic force microscopy, and 3D reconstruction, we show that the discs are made up of densely packed arrays of NCs. The prolonged illumination of C9-NCs results in a chain-like assembly due to the dipolar attraction between the previously assembled superstructures. The efficient photoisomerization of chromophores located away from the nanocluster surface has been identified as the key element to speed up the light-induced assembly in chromophore-tethered nanoclusters. Such information will be useful while developing nanoscale photoswitches for electrochemistry, biosensors, and electronic devices.

Photoluminescent Characterization of Metal Nanoclusters: Basic Parameters, Methods, and Applications

Metal nanoclusters (MNCs) can be synthesized with atomically precise structures and molecule formulae due to the rapid development of nanocluster science in recent decades. The ultrasmall size range (normally < 2 nm) endows MNCs with plenty of molecular-like properties, among which photoluminescent properties have aroused extensive attention. Tracing the research and development processes of luminescent nanoclusters, various photoluminescent analysis and characterization methods play a significant role in elucidating luminescent mechanism and analyzing luminescent properties. In this review, it is aimed to systematically summarize the normally used photoluminescent characterizations in MNCs including basic parameters and methods, such as excitation/emission wavelength, quantum yield, and lifetime. For each key parameter, first its definition and meaning is introduced and then the relevant characterization methods including measuring principles and the revelation of luminescent properties from the collected data are discussed. Then, it is discussed in details how to explore the luminescent mechanism of MNCs and construct NC-based applications based on the measured data. By means of these characterization strategies, the luminescent properties of MNCs and NC-based designs can be explained quantitatively and qualitatively. Hence, this review is expected to provide clear guidance for researchers to characterize luminescent MNCs and better understand the luminescent mechanism from the measured results.

Highly intense NIR emissive Cu4Pt2 bimetallic clusters featuring Pt(i)-Cu4-Pt(i) sandwich kernel

Metal nanoclusters (NCs) capable of near-infrared (NIR) photoluminescence (PL) are gaining increasing interest for their potential applications in bioimaging, cell labelling, and phototherapy. However, the limited quantum yield (QY) of NIR emission in metal NCs, especially those emitting beyond 800 nm, hinders their widespread applications. Herein, we present a bright NIR luminescence (PLQY up to 36.7%, ∼830 nm) bimetallic Cu4Pt2 NC, [Cu4Pt2(MeO-C6H5-C[triple bond, length as m-dash]C)4(dppy)4]2+ (dppy = diphenyl-2-pyridylphosphine), with a high yield (up to 67%). Furthermore, by modifying the electronic effects of R in RC[triple bond, length as m-dash]C- (R = MeO-C6H5, F-C6H5, CF3-C6H5, Nap, and Biph), we can effectively modulate phosphorescence properties, including the PLQY, emission wavelength, and excited state decay lifetime. Experimental and computational studies both demonstrate that in addition to the electron effects of substituents, ligand modification enhances luminescence intensity by suppressing non-radiation transitions through intramolecular interactions. Simultaneously, it allows the adjustment of emitting wavelengths by tuning the energy gaps and first excited triplet states through intermolecular interactions of ligand substituents. This study provides a foundation for rational design of the atomic-structures of alloy metal NCs to enhance their PLQY and tailor the PL wavelength of NIR emission.

Assemble-Disassemble-Reassemble Dynamics in Copper Nanocluster-Based Superstructures

Assembling metal nanoclusters (MNCs) to form superstructures generates exciting photophysical properties distinct from those of their discrete precursors. Controlling the assembly process of MNCs and understanding the assembly-disassembly dynamics can have implications in achieving the reversible self-assembly of MNCs. The formation of self-assembled copper nanoclusters (CuNCs) as homogeneous superstructures and the underlying mechanisms governing such a process remain unexplored. Smart molecular imprinting of surface ligands can establish the forces necessary for the formation of such superstructures. Herein, we report highly luminescent, ordered superstructures of 4-phenylimidazole-2-thiol (4-PIT)-protected CuNCs with the help of l-ascorbic acid as a secondary ligand. Through a comprehensive spectroscopic analysis, we deciphered the mechanism of the self-assembly process, where the role of interligand H-bonding and C-H-π interactions was established. Notably, efficient reversibility of assembly-disassembly was demonstrated by re-establishing the interligand interactions and regenerating their photophysical and morphological signatures.

Pargyline-phosphine copper(I) clusters with tunable emission for light-emitting devices

Three pargyline-phosphine copper(I) clusters, [Cu4(CC-C9H12N)3(PPh3)4](PF6) (1) and [Cu6(CC-C9H12N)4(dppy)4](X)2 (dppy = diphenyl-2-pyridylphosphine; X = PF6 for 2 and X = ClO4 for 3), were synthesized. Their structures were fully characterized using various spectroscopic methods and X-ray crystallography, which showed that the stoichiometry and nature of pargyline and phosphine ligands play an important role in tuning the structure and photophysical features of Cu(I) clusters. Interestingly, clusters 1, 2 and 3 exhibited red, orange and yellow phosphorescence with high quantum yields of 88.5%, 22.0% and 40.2%, respectively, at room temperature. Moreover, clusters 1-3 show distinct temperature-dependent emissions. The excellent luminescence performance of 1 and 3 was designed and employed for the construction of monochrome and white light-emitting devices (LEDs).

Assembly of Homochiral Aluminum Oxo Clusters for Circularly Polarized Luminescence

Chiral aluminum oxo clusters (cAlOCs) are distinguished from other classes of materials on account of their abundance in the earth's crust and their potential for sustainable development. However, the practical synthesis of cAlOCs is rarely known. Herein, we adopt a synergistic coordination strategy by using chiral amino acid ligands as bridges and auxiliary pyridine-2,6-dicarboxylic acid as chelating ligands and successfully isolate an extensive family of cAlOCs. They integrate molecular chirality, absolute helicity, and intrinsic hydrogen-bonded chiral topology. Moreover, they have the structural characteristics of one-dimensional channels and replaceable counteranions, which make them well combined with fluorescent dyes for circularly polarized luminescence (CPL). The absolute luminescence dissymmetry factor (glum) of up to the 10-3 order is comparable to several noble metals, revealing the enormous potential of cAlOCs in low-cost chiral materials. We hope this work will inspire new discoveries in the field of chirality and provide new opportunities for constructing low-cost chiral materials.

Metal Clusters Confined in Chiral Zeolitic Imidazolate Framework for Circularly Polarized-Luminescence Inks

Chiroptical activities arising in nanoclusters (NCs) are emerging as one of the most dynamic areas of modern science. However, devising an overarching strategy that is capable of concurrently enhancing the photoluminescence (PL) and circularly polarized luminescence (CPL) of metal NCs remains a formidable challenge. Herein, gold and silver nanoclusters (AuNCs, AgNCs) are endowed with CPL, for the first time, through a universal host-guest approach─centered around perturbing a chiral microenvironment within chiral hosts, simultaneously enhancing emissions. Remarkably, the photoluminescence quantum yield (PLQY) of AuNCs has undergone an increase of over 200 times upon confinement, escalating from 0.05% to 12%, and demonstrates a CPL response. Moreover, a three-dimensional (3D) model termed "NCs@CMOF" featuring CPL activity is created using metal cluster-based assembly inks through the process of 3D printing. This work introduces a potentially straightforward and versatile approach for achieving both PL enhancement and CPL activities in metal clusters.

Assembly-Induced Emission of Copper Nanoclusters: Revealing the Sensing Mechanism for Detection of Volatile Basic Nitrogen in Seafood Freshness On-Site Monitoring

Total volatile basic nitrogen (TVB-N) is a vital indicator for assessing seafood freshness and edibility. Rapid on-site detection of volatile basic nitrogen (VBN) is of significant importance for food safety monitoring. In this study, highly luminescent self-assembled copper nanoclusters (Cu NCs@p-MBA), synthesized using p-mercaptobenzoic acid (p-MBA) as the ligand, were utilized for the sensitive detection of VBNs. Under acidic conditions, Cu NCs@p-MBA formed compact and well-organized nanosheets through noncovalent interactions, accompanied by intense orange fluorescence emission (651 nm). The benzene carboxylic acid part of Cu NCs@p-MBA provided the driving force for supramolecular assembly and exhibited a strong affinity for amines, particularly low-molecular-weight amines such as ammonia (NH3) and trimethylamine (TMA). The quantitative determination of NH3 and TMA showed the detection limits as low as 0.33 and 0.81 ppm, respectively. Cu NCs@p-MBA also demonstrated good responsiveness to putrescine and histamine. Through density functional theory (DFT) calculations and molecular dynamics (MD) simulations, the precise atomic structure, assembly structure, luminescent properties, and reaction processes of Cu NCs@p-MBA were studied, revealing the sensing mechanism of Cu NCs@p-MBA for highly sensitive detection of VBNs. Based on the self-assembled Cu NCs@p-MBA nanosheets, portable fluorescent labels were developed for semiquantitative, visual, and real-time monitoring of seafood freshness. Therefore, this study exemplified the high sensitivity of self-assembly induced emission (SAIE)-type Cu NCs@p-MBA for VBNs sensing, offering an efficient solution for on-site monitoring of seafood freshness.

Self-assembled copper nanoclusters used to mimic peroxidase for glucose detection

A sensing system for glucose was established based on a self-assembled copper nanoclusters (Cu NCs)-based nano-enzyme and glucose oxidase (GOD). The assembled copper nanosheets (Cu NSs) were prepared in a one-step method using 2,3,4,5,6-pentafluorothiophenol (PFTP) as a reducing agent and protecting ligand. Cu NSs could be used to mimic the enzyme horseradish peroxidase. Cu NSs were endowed with excellent enzymatic catalytic activity in the oxidation of o-phenyldiamine (OPD) in the presence of H2O2. The latter could be generated in the aerobic oxidation of glucose catalyzed by GOD. Therefore, a detection method for glucose was constructed based on a Cu NSs-OPD-GOD catalytic system. This proposed sensing platform showed a standard linear range from 10 μM to 5 mM towards glucose, and the limit of detection was 5.5 μM. Finally, practical application of a sensor based on the Cu NSs nano-enzyme was verified in three sugared beverages as real samples. Our data reveal that the prepared Cu NSs could mimic peroxidase and be applied to a mixed catalytic system with GOD for glucose detection.

Allochroic cluster light-emitting diodes based on unique μ3-tetraphosphine Cu3X3 crowns with tunable excited states

Multicomponent excited states endow copper iodide clusters with allochroic properties under diverse stimuli. However, crystal states are required, and cluster stimulus sensitivity hampers electroluminochromism. We developed PhQPCu3X3 (X = Cl, Br, and I) with the first μ3-bridging tetraphosphine ligand, whose Cu3X3 crowns were exposed to external stimulus. The increased proportion of Cu3X3 results in equal contributions of cluster- and ligand-centered components to excited states, the former of which is highly sensitive to grind, vapor, and, especially, electric stimuli, due to semi-exposed Cu3X3. Through vacuum evaporation and vapor fumigation of cluster-based emissive layers, the diodes' electroluminescence colors changed from yellow to white. Joule heat during device operation induced further color variation to orange, corresponding to Commission Internationale de l'Eclairage coordinates of PhQPCu3I3 changed from (0.44 ± 0.1, 0.34 ± 0.1) to (0.57 ± 0.1, 0.42 ± 0.1). These results demonstrate the superiority of luminescent clusters in accurate excited-state modulation, holding promise for wide applications.

Ratiometric fluorescence sensing of hazardous ciprofloxacin based on aggregation induced emission enhancement of thiolate-protected gold nanoclusters induced by La3+ ion

In this research work, ultrasensitive and reliable ratiometric sensor was designed for assay of ciprofloxacin (CIPRO). The platform consists of thiolate-protected gold nanoclusters (GSH@AuNCs) with high fluorescence quantum yield and long-term stability. In the existence of lanthanum (La3+) ion, the GSH@AuNCs emission was sharply raised owing to the formation of La3+/GSH@AuNCs system accompanied with aggregation-induced emission enhancement (AIEE). Addition of CIPRO, a good La3+ ion coordinator, decreased the fluorescence emission of La3+/GSH@AuNCs system at 610 nm significantly as a result of disaggregation caused by the removal of La3+ ion from GSH@AuNCs surface. Furthermore, the blue emission of La3+-CIPRO coordination complex appears at 440 nm. Under optimized conditions, the fluorescence ratios (F440/F610) were linearly increased with increasing the CIPRO amount within the range of 0.003-200 µM with a limit of detection equal to 0.2 nM (S/N = 3). The as-fabricated La3+/GSH@AuNCs system possesses outstanding reliability and sensitivity for the detection of CIPRO. The system was effectively used to assay CIPRO in human urine and milk specimens with recoveries % of 97.6-102.3 % and 96.7-105.7 % for urine and milk samples, respectively and RSD % did not exceed 2.5 %, suggesting the accuracy of the method.

Self-Assembly of Atomically Precise Silver Nanoclusters in Crowded Colloids into Ultra-Long Ribbons with Tunable Supramolecular Chirality

Atomically precise metal nanoclusters (NCs) emerge as fascinating synthons in self-assembled materials. The self-assembly of metal NCs are highly sensitive to the environment because they have an inorganic-organic hybridized structure and a relatively complicated conformation. Here, it is shown that when confined in crowded colloids, a water-soluble Ag9 -cored nanocluster (Ag9 -NC) can self- assemble into ultra-long (up to millimeters) and photoluminescent ribbons with high flexibility. The ribbon contains rectangularly organized columns of Ag9 -NCs and can undergo secondary self-assembly to form bundled and branched structures. Formation of ribbons is observed in all the tested colloids, including lyotropic liquid crystals and disordered, three-dimensional network. The high viscosity/elasticity of the crowded colloids weakens gravity-induced sedimentation of the ribbons, leading to the formation of an interesting class of inorganic-organic composite materials where the hard Ag-containing skeleton strengthens the soft matter. The simultaneously occurring symmetry breaking during the self-assembly of Ag9 -NCs gives uncontrolled supramolecular chirality, which can be tuned through the majority rule and soldier-and-sergeant rule by the introduction of chiral seeds. The regulated chirality and the intrinsic photoluminescence of the Ag9 -NCs ribbons impart the composite material circularly polarized luminescence, opening the door for a variety of potential applications.

Solvent-Induced Aggregation of Self-Assembled Copper-Cysteine Nanoparticles Reacted with Glutathione: Enhancing Linear and Nonlinear Optical Properties

Copper-thiolate self-assembly nanostructures are a unique class of nanomaterials because of their interesting properties such as hierarchical structures, luminescence, and large nonlinear optical efficiency. Herein, we synthesized biomolecule cysteine (Cys) and glutathione (GSH) capped sub-100 nm self-assembly nanoparticles (Cu-Cys-GSH NPs) with red fluorescence. The as-synthesized NPs show high emission enhancement in the presence of ethanol, caused by the aggregation-induced emission. We correlated the structure and optical properties of Cu-Cys-GSH NPs by measuring the mass, morphology, and surface charge as well as their two-photon excited fluorescence cross-section (σ2PEPL), two-photon absorption cross-section (σTPA) and first hyperpolarizability (β) of Cu-Cys-GSH NPs in water and water-ethanol using near-infrared wavelength. We found a high β value as (77 ± 10) × 10-28 esu (in water) compared to the reference medium water. The estimated values of σ2PEPL and σTPA are found to be (13 ± 2) GM and (1.4 ± 0.2) × 104 GM, respectively. We hope our investigations of linear and nonlinear optical properties of copper-thiolate self-assemblies in water and its solvent-induced aggregates will open up new possibilities in designing self-assembled systems for many applications including sensing, drug delivery, and catalysis.

Engineering GaN/AuNC core-shell nanowire heterojunctions by gold nanoclusters with excitation-dependent behavior for enhancing the responsivity and stability of self-driven photodetectors

Self-driven broadband photodetectors (PDs) with low-power consumption have great potential applications in the wide range of next-generation optoelectronic devices. In this study, a self-driven broadband PD responding to an ultraviolet-visible range based on gallium nitride/gold nanocluster (GaN/AuNC) core-shell nanowire heterojunctions is fabricated for the first time. By introducing the AuNCs onto the GaN nanowire surfaces, the GaN/AuNC core-shell nanowire heterojunctions can be formed efficiently. It is crucial that AuNCs have the functions of light collectors and hole conductors in heterojunctions due to the suitable energy level alignment. Under the optimized conditions of AuNCs, it is found that GaN/AuNC core-shell nanowires can significantly increase the photocurrent and responsivity of PDs, mainly resulting from the light interreflection within the heterojunctions and the effective improvement of carrier transport. Owing to the excitation-dependent emission behavior of AuNCs, the responsivity of PD with GaN/AuNC core-shell nanowire heterojunctions can be enhanced by around 330% compared with that of PD without AuNCs under visible illumination. Furthermore, GaN/AuNC hybrid nanowires with excitation-dependent fluorescence behavior can modulate the enhanced amplitude performance of broadband PDs. Owing to the high stability of AuNCs, the photocurrent of the PD with AuNCs is still quite stable after continuous operation for more than 20 000 s. Therefore, this study provides an effective method for developing new broadband PDs with high performance and low energy consumption.

Ligand-induced Assembly of Copper Nanoclusters with Enhanced Electrochemical Excitation and Radiative Transition for Electrochemiluminescence

Copper nanoclusters (CuNCs) are emerging electrochemiluminescence (ECL) emitters with unique molecule-like electronic structures, high abundance, and low cost. However, the synthesis of CuNCs with high ECL efficiency and stability in a scalable manner remains challenging. Here, we report a facile gram-scale approach for preparing self-assembled CuNCs (CuNCsAssy ) induced by ligands with exceptionally boosted anodic ECL and stability. Compared to the disordered aggregates that are inactive in ECL, the CuNCsAssy shows a record anodic ECL efficiency for CuNCs (10 %, wavelength-corrected, relative to Ru(bpy)3 Cl2 /tripropylamine). Mechanism studies revealed the unusual dual functions of ligands in simultaneously facilitating electrochemical excitation and radiative transition. Moreover, the assembly addressed the limitation of poor stability of conventional CuNCs. As a proof of concept, an ECL biosensor for alkaline phosphatase detection was successfully constructed with an ultralow limit of detection of 8.1×10-6  U/L.

Construction of nanohybrid Tb@CDs/GSH-CuNCs as a ratiometric probe to detect phosphate anion based on aggregation-induced emission and FRET mechanism

The simple preparation of a nanohybrid of terbium-doped carbon dots/glutathione-capped copper nanoclusters (Tb@CDs/GSH-CuNCs) was for the first time developed for ratiometric detection of phosphate anion (Pi). Blue-emission of Tb@CDs can trigger non-luminescence of GSH-CuNCs for aggregation-induced emission (AIE) performance due to the strong reserved coordination capacity of Tb3+. Thus, Tb@CDs/GSH-CuNCs rapidly generated dual-emission signals at 630 nm and 545 nm by directly mixing the two individual materials via the AIE effect, alongside fluorescence resonance energy transfer (FRET) process. However, by the introduction of Pi, both AIE and FRET processes were blocked because of the stronger binding affinity of Tb3+ and Pi than that of Tb3+ and -COOH on Tb@CDs, thus realizing successful ratiometric detection of Pi. The linear concentration range was 0-16 μM, with the limit of detection (LOD) of 0.32 μM. The proposed method provided new ideas for designing nanohybrid of CDs and nanoclusters (MNCs) as ratiometric fluorescent probes for analytical applications.

pH-Switchable phenylalanine-templated copper nanoclusters: CO2 probing and efficient peroxidase mimicking activity

Inter-cluster conversion through the strategic tuning of external stimuli and thereby modulation of the optical properties of metal nanoclusters (MNCs) is an emerging domain for exploration. Herein, we report the preparation of blue-emitting CuNCs using phenylalanine (Phe) as a template under acidic conditions (pH ∼ 4). The as-prepared CuNCs exhibit a sequential tuning of the photophysical properties upon varying the pH of the solution from pH ∼4 to pH ∼12. Blue-emitting CuNCs (B-CuNCs, λem = 410 nm) are systematically converted to cyan-emitting CuNCs (C-CuNCs, λem = 490 nm) with a large red-shifted emission maximum by 80 nm as a function of pH. Our present investigation delineates an unprecedented switchability of the photoluminescence (PL) properties of the CuNCs with the variations of the pH from pH ∼4 to pH ∼12. Both the Phe-templated CuNCs (B-CuNCs and C-CuNCs) were broadly characterized by various spectroscopic and morphological techniques. The X-ray photoelectron spectroscopy (XPS) studies reveal the presence of different oxidation states in the metallic core of B-CuNCs and C-CuNCs. These results in turn substantiate the pH-induced intercluster conversion of CuNCs through the substantial change in their core composition as well as valence states. Owing to the pH sensitivity, the CuNCs act as an efficient and highly sensitive probe for CO2, and quantitative estimation of the dissolved CO2 in the form of bicarbonate ions has been achieved through the enhancement of the PL intensity, wherein a very low value of the limit of detection (LOD) of ∼60 μM was obtained. Furthermore, we demonstrated that the CuNCs act as an efficient bio-catalyst with peroxidase mimicking enzymatic activity which has been investigated using OPD as a substrate under physiological conditions (pH ∼7.4 and temperature ∼37 °C). The mechanistic investigations confirmed that the oxidation of OPD mainly proceeds through the generation of hydroxyl radicals (˙OH). We hope the present investigations shed light on a multidimensional aspect of MNCs and uncover an upsurging recent interest in MNCs to act as an artificial enzyme.

Bulk Passivation Enables Hundredfold-Enhanced Electroluminescence of Monophosphine Cu4 I4 Cubes

Electroluminescent (EL) clusters emerged rapidly, owing to their organic-inorganic hybrid character useful for comprehensive performance integration and the potential for large-scale display and lighting applications. However, despite their good photoluminescent (PL) properties, until present, no efficient EL monodentate ligand-based clusters were reported due to structural variation during processing and excitation and exciton confinement on cluster-centered quenching states. Here we demonstrate an effective bulky passivation strategy for efficient cluster light-emitting diodes with a monophosphine Cu4 I4 cube named [TMeOPP]4 Cu4 I4 . With terminal pyridine groups, an active matrix named TmPyPB supports an effective host-cluster interplay for configuration fixation, structural stabilization, and exciton-confinement optimization. Compared to common inactive hosts, the passivation effects of TmPyPB markedly reduce trap-state densities by 24-40 % to suppress nonradiative decay, resulting in state-of-the-art PL and EL quantum yields reaching 99 % and 15.6 %, respectively, which are significantly improved by about 7-fold. TmPyPB simultaneously increases EL luminance to 104 nits, which is ≈100-fold that of the non-doped analogue.

DNA Nanoribbon-Assisted Intracellular Biosynthesis of Fluorescent Gold Nanoclusters for Cancer Cell Imaging

Metal nanoclusters (NCs) have emerged as a promising class of fluorescent probes for cellular imaging due to their high resistance to photobleaching and low toxicity. Nevertheless, their widespread use in clinical diagnosis is limited by their unstable intracellular fluorescence. In this study, we develop an intracellularly biosynthesized fluorescent probe, DNA nanoribbon-gold NCs (DNR/AuNCs), for long-term cellular tracking. Our results show that DNR/AuNCs exhibit a 4-fold enhancement of intracellular fluorescence intensity compared to free AuNCs. We also investigated the mechanism underlying the fluorescence enhancement of AuNCs by DNRs. Our findings suggest that the higher synthesis efficiency and stability of AuNCs in the lysosome may contribute to their fluorescence enhancement, which enables long-term (up to 15 days) fluorescence imaging of cancer cells (enhancement of ∼60 times compared to free AuNCs). Furthermore, we observe similar results with other metal NCs, confirming the generality of the DNR-assisted biosynthesis approach for preparing highly bright and stable fluorescent metal NCs for cancer cell imaging.

In Situ Depletion-Guided Engineering of Nanoshell-like Gold Nanocluster Assemblies with Enhanced Peroxidase-like Nanozyme Activity

Functional superstructures constructed from metal nanoclusters (MNCs) hold great promise in providing highly tunable photoluminescence (PL), catalytic activity, photothermal stability, and biological functionality. However, their controlled synthesis with well-defined size, structure, and properties remains a significant challenge. Herein, we introduce a novel approach that combines depletion attraction and thermal activation to induce the in situ formation of spherical superclusters (AuSCs) from Au(I)-thiolate complexes within the assembly. Extensive characterization and electron tomographic reconstruction reveal that Au(I)-thiolate complexes can be sequentially transitioned into metallic Au0, resulting in hollow nanoshell-like structures with consistent size (∼110 nm) and diverse shell configurations. Our results demonstrate that AuSCs with thinner shells, containing a high concentration of Au(I)-thiolate complexes, exhibit the highest PL, while AuSCs with thicker shells, containing high concentrations of metallic gold atoms and low ligand density, show remarkable peroxidase-like nanozyme activity in the 3,3',5,5'-tetramethylbenzidine (TMB) oxidation reaction.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Amorphous Copper-Based Nanoparticles with Clusterization-Triggered Phosphorescence for Ultrasensing 2,4,6-Trinitrotoluene

Amorphous metal-based nanostructures have attracted great attention recently due to their facilitative electron transfer and abundant reactive sites, whereas it remains enigmatic as to whether amorphous copper-based nanoparticles (CuNPs) can be achieved. Here, for synthesizing amorphous CuNPs, glutathione is adopted as a ligand to inhibit the nucleation and crystallization process via its electrostatic repulsion. By subtly tailoring the solvent polarity, not only can amorphous glutathione-functionalized CuNPs (GSH-CuNPs) with phosphorescent performance be achieved after transferring the non-conjugation of GSH ligand to through-space conjugation, namely clusterization-triggered emission, but also the phosphorescence-off of GSH-CuNPs toward 2,4,6-trinitrotoluene (TNT) can be realized by the photoinduced electron-transfer process through the hydrogen bond channel, which is established between carboxyl and amino groups of GSH-CuNPs with the nitryl group of TNT. Benefitting from the intrinsic superiorities of the amorphous CuNPs, desired phosphorescence and detection performances of GSH-CuNPs toward airborne TNT microparticulates are undoubtedly realized, including high quantum yield (13.22%), excellent specificity in 33 potential interferents, instantaneous response, and ultralow detection limit (1.56 pg). The present GSH-CuNPs are expected to stretch amorphous metal-based nanostructures and deepen the insights into amorphous materials for optical detection.

Intramolecular charge transfer enables highly-efficient X-ray luminescence in cluster scintillators

Luminescence clusters composed of organic ligands and metals have gained significant interests as scintillators owing to their great potential in high X-ray absorption, customizable radioluminescence, and solution processability at low temperatures. However, X-ray luminescence efficiency in clusters is primarily governed by the competition between radiative states from organic ligands and nonradiative cluster-centered charge transfer. Here we report that a class of Cu₄I₄ cubes exhibit highly emissive radioluminescence in response to X-ray irradiation through functionalizing biphosphine ligands with acridine. Mechanistic studies show that these clusters can efficiently absorb radiation ionization to generate electron-hole pairs and transfer them to ligands during thermalization for efficient radioluminescence through precise control over intramolecular charge transfer. Our experimental results indicate that copper/iodine-to-ligand and intraligand charge transfer states are predominant in radiative processes. We demonstrate that photoluminescence and electroluminescence quantum efficiencies of the clusters reach 95% and 25.6%, with the assistance of external triplet-to-singlet conversion by a thermally activated delayed fluorescence matrix. We further show the utility of the Cu₄I₄ scintillators in achieving a lowest X-ray detection limit of 77 nGy s^-1 and a high X-ray imaging resolution of 12 line pairs per millimeter. Our study offers insights into universal luminescent mechanism and ligand engineering of cluster scintillators.

Structural water molecules dominated p band intermediate states as a unified model for the origin on the photoluminescence emission of noble metal nanoclusters: from monolayer protected clusters to cage confined nanoclusters

In the past several decades, noble metal nanoclusters (NMNCs) have been developed as an emerging class of luminescent materials due to their superior photo-stability and biocompatibility, but their luminous quantum yield is relatively low and the physical origin of the bright photoluminescence (PL) of NMNCs remain elusive, which limited their practical application. As the well-defined structure and composition of NMNCs have been determined, in this mini-review, the effect of each component (metal core, ligand shell and interfacial water) on their PL properties and corresponded working mechanism were comprehensively introduced, and a model that structural water molecules dominated p band intermediate state was proposed to give a unified understanding on the PL mechanism of NMNCs and a further perspective to the future developments of NMNCs by revisiting the development of our studies on the PL mechanism of NMNCs in the past decade.

Dissociative reactions of [Au25(SR)18]- at copper oxide nanoparticles and formation of aggregated nanostructures

Reactions between nanoclusters (NCs) have been studied widely in the recent past, but such processes between NCs and metal-oxide nanoparticles (NPs), belonging to two different size ranges, have not been explored earlier. For the first time, we demonstrate the spontaneous reactions between an atomically precise NC, [Au₂₅(PET)₁₈]^- (PET = 2-phenylethanethiolate), and polydispersed copper oxide nanoparticles with an average diameter of 50 nm under ambient conditions. These interparticle reactions result in the formation of alloy NCs and copper-doped NC fragments, which assemble to form nanospheres at the end of the reaction. High-resolution electrospray ionization mass spectrometry (ESI MS), transmission electron microscopy (HR-TEM), electron tomography, and X-ray photoelectron spectroscopy (XPS) studies were performed to understand the structures formed. The results from our study show that interparticle reactions can be extended to a range of chemical systems, leading to diverse alloy NCs and self-assembled colloidal superstructures.

A luminescent Cu4 cluster film grown by electrospray deposition: a nitroaromatic vapour sensor

We present the fabrication and use of a film of a carborane-thiol-protected tetranuclear copper cluster with characteristic orange luminescence using ambient electrospray deposition (ESD). Charged microdroplets of the clusters produced by an electrospray tip deposit the clusters at an air-water interface to form a film. Different microscopic and spectroscopic techniques characterized the porous surface structure of the film. Visible and rapid quenching of the emission of the film upon exposure to 2-nitrotoluene (2-NT) vapours under ambient conditions was observed. Density functional theory (DFT) calculations established the favourable binding sites of 2-NT with the cluster. Desorption of 2-NT upon heating recovered the original luminescence, demonstrating the reusability of the sensor. Stable emission upon exposure to different organic solvents and its quenching upon exposure to 2,4-dinitrotoluene and picric acid showed selectivity of the film to nitroaromatic species.

Fluorescence Enhancement Method for Aptamer-Templated Silver Nanoclusters and Its Application in the Construction of a β-Amyloid Oligomer Sensor

DNA-templated silver nanoclusters (DNA-AgNCs) have attracted significant attention due to their unique fluorescence properties. However, so far, the relatively low quantum yields of the DNA-AgNCs and the complex design of DNA-AgNC-based sensors have limited their application in biosensing or bioimaging. Herein, we report a novel fluorescence enhancement method. The β-Amyloid Oligomer (AβO) aptamer (Apt_AβO) with A₁₀/T₁₀ at its 3' end can be directly used as the template to fabricate the AgNCs. When the AgNCs were hybridized with the complementary strand that has 12 bases suspended at its 3' terminal, being the same or complementary to the A/T at the 3' end of the Apt_AβO, and two-base mismatches in the complementary region of the aptamer excluded A₁₀/T₁₀, a dramatic fluorescence enhancement (maximum: ∼500-fold; maximum quantum yield: 31.5%) can be realized. The fluorescence enhancement should result from the aggregation-induced emission of the AgNCs, which can be attributed to forming the reticular structure of the hybridized product. To some extent, the method developed in this work is extendable. The fluorescence enhancement was also realized from the thrombin aptamer-templated AgNCs through designing the aptamer and the corresponding complementary strand according to the method. Based on the fluorescence enhancement of the Apt_AβO-templated AgNCs, an "on-off" fluorescence sensor was constructed for the sensitive and selective detection of AβO. This work provides a rational strategy to realize fluorescence enhancement for the aptamer-templated AgNCs and design an aptamer-based fluorescence sensor.

Precision Nanocluster-Based Toroidal and Supertoroidal Frameworks Using Photocycloaddition-Assisted Dynamic Covalent Chemistry

Atomically precise nanoclusters (NCs) have recently emerged as ideal building blocks for constructing self-assembled multifunctional superstructures. The existing structures are based on various non-covalent interactions of the ligands on the NC surface, resulting in inter-NC interactions. Despite recent demonstrations on light-induced reversible self-assembly, long-range reversible self-assembly based on dynamic covalent chemistry on the NC surface has yet to be investigated. Here, it is shown that Au₂₅ NCs containing thiolated umbelliferone (7-hydroxycoumarin) ligands allow [2+2] photocycloaddition reaction-induced self-assembly into colloidal-level toroids. The toroids upon further irradiation undergo inter-toroidal reaction resulting in macroscopic supertoroidal honey-comb frameworks. Systematic investigation using electron microscopy, atomic force microscopy (AFM), and electron tomography (ET) suggest that the NCs initially form spherical aggregates. The spherical structures further undergo fusion resulting in toroid formation. Finally, the toroids fuse into macroscopic honeycomb frameworks. As a proof-of-concept, a cross-photocycloaddition reaction between coumarin-tethered NCs and an anticancer drug (5-fluorouracil) is demonstrated as a model photo-controlled drug release system. The model system allows systematic loading and unloading of the drug during the assembly and disassembly under two different wavelengths. The results suggest that the dynamic covalent chemistry on the NC surface offers a facile route for hierarchical multifunctional frameworks and photocontrolled drug release.

Ligand-Triggered Self-Assembly of Flexible Carbon Dot Nanoribbons for Optoelectronic Memristor Devices and Neuromorphic Computing

Carbon dots (CDs) are widely utilized in sensing, energy storage, and catalysis due to their excellent optical, electrical and semiconducting properties. However, attempts to optimize their optoelectronic performance through high-order manipulation have met with little success to date. In this study, through efficient packing of individual CDs in two-dimensions, the synthesis of flexible CDs ribbons is demonstrated technically. Electron microscopies and molecular dynamics simulations, show the assembly of CDs into ribbons results from the tripartite balance of π-π attractions, hydrogen bonding, and halogen bonding forces provided by the superficial ligands. The obtained ribbons are flexible and show excellent stability against UV irradiation and heating. CDs ribbons offer outstanding performance as active layer material in transparent flexible memristors, with the developed devices providing excellent data storage, retention capabilities, and fast optoelectronic responses. A memristor device with a thickness of 8 µm shows good data retention capability even after 10⁴ cycles of bending. Furthermore, the device functions effectively as a neuromorphic computing system with integrated storage and computation capabilities, with the response speed of the device being less than 5.5 ns. These properties create an optoelectronic memristor with rapid Chinese character learning capability. This work lays the foundation for wearable artificial intelligence.

Gold nanoclusters with enhanced near-infrared emission and its application as sensors for biological molecules

Ultrasmall gold nanoclusters (NCs) have been engineered as a new kind of functional material due to their excellent photoluminescence properties. However, the synthesis of highly luminescent water-soluble nanoclusters with near-infrared (NIR) emission remains limited. Herein, we developed a pH-regulated strategy to facilitate the construction of self-assemblies with enhanced luminescence based on aggregation-induced emission (AIE) strategy. Using 2-mercaptobenzoic acid (MBA) as reductant and stabilizer, the original weakly luminescent AuNCs exhibited intense emission by adjusting pH controllably. The formation of compact organized nanostructures could effectively restrict the rotation and vibration of capping ligands by non-covalent interactions, which reduced the nonradiative relaxation from excited states and finally improved the emission properties of AuNCs. Moreover, the assemblies possess many intriguing features including bright NIR luminescence and excellent biocompatibility, which could be used as luminous probes in biological molecules sensing (tyrosinase (TYR) and dopamine (DA)) and promising candidates for cell imaging. This study provides a simple and feasible strategy for developing metal NCs-based smart optical materials in the field of bioscience.

Visual Detection and Sensing of Mercury Ions and Glutathione Using Fluorescent Copper Nanoclusters

Visual detection of mercury ions and glutathione is of great significance to public health and environmental issues. Herein, we developed a fluorescent sensor (l-Cys/CuNCs@ESM) based on the eggshell membrane (ESM) and red-emitting copper nanoclusters (CuNCs) by the in situ strategy via l-cysteine (l-Cys) as the reducing and protective agent for mercury ions and glutathione sensing visually. The as-prepared fluorescent product had good stability, portability, large Stokes shift (250 nm), and long fluorescence lifetime (7.3 μs). Notably, the l-Cys/CuNCs@ESM exhibited a specific fluorescence quenching response toward Hg²⁺. Moreover, the interaction between glutathione (GSH) and Hg²⁺ could subsequently recover the fluorescence effectively. Inspired by this "on-off-on" switch, the l-Cys/CuNCs@ESM was applied as the dual-sensing system for visual detection of mercury ions and glutathione integrating with the portable smartphone. The limit of detection (LOD) of Hg²⁺ is 1.1 μM for visualization and 0.52 μM for the fluorescence spectrometer. The corresponding LODs of GSH are 2.8 and 0.59 μM, respectively. This platform presents significant sensitivity, specificity, and stability, offering a promising potential for real-time/on-site sensing.

Preparation of a Red-Emitting, Chitosan-Stabilized Copper Nanocluster Composite and Its Application as a Hydrogen Peroxide Detection Probe in the Analysis of Water Samples

Hydrogen peroxide (H₂O₂) is an important reactive oxygen species that mediates a variety of physiological functions in biological processes, and it is an essential mediator in food, pharmaceutical, and environmental analysis. However, H₂O₂ can be dangerous and toxic at certain concentrations. It is crucial to detect the concentration of H₂O₂ in the environment for human health and environmental protection. Herein, we prepared the red-emitting copper nanoclusters (Cu NCs) by a one-step method, with lipoic acid (LA) and sodium borohydride as protective ligands and reducing agents, respectively, moreover, adding chitosan (CS) to wrap LA-Cu NCs. The as-prepared LA-Cu NCs@CS have stronger fluorescence than LA-Cu NCs. We found that the presence of H₂O₂ causes the fluorescence of LA-Cu NCs@CS to be strongly quenched. Based on this, a fluorescent probe based on LA-Cu NCs@CS was constructed for the detection of H₂O₂ with a limit of detection of 47 nM. The results from this research not only illustrate that the as--developed fluorescent probe exhibits good selectivity and high sensitivity to H₂O₂ in environmental water samples but also propose a novel strategy to prepare red-emitting copper nanoclusters (Cu NCs) by a one-step method.

Aggregation-Induced Electrochemiluminescence of Copper Nanoclusters by Regulating Valence State Ratio of Cu(I)/Cu(0) for Ultrasensitive Detection of MicroRNA

In this work, Cu nanoclusters (Cu NCs) with strong aggregation-induced electrochemiluminescence (AIECL) as emitters were used to construct an ECL biosensor for ultrasensitive detection of microRNA-141 (miR-141). Impressively, the ECL signals enhanced with the increased content of Cu(I) in the aggregative Cu NCs. When the ratio of Cu(I)/Cu(0) in aggregative Cu NCs was 3.2, Cu NCs aggregates showed the highest ECL intensity, in which Cu(I) could enhance the cuprophilic Cu(I)···Cu(I) interaction to form rod-shaped aggregates for restricting nonradiative transitions to obviously improve the ECL response. As a result, the ECL intensity of the aggregative Cu NCs was 3.5 times higher than that of the monodispersed Cu NCs. With the aid of the cascade strand displacement amplification (SDA) strategy, an outstanding ECL biosensor was developed to achieve the ultrasensitive detection of miR-141, whose linear range varied from 10 aM to 1 nM with a detection limit of 1.2 aM. This approach opened an avenue to prepare non-noble metal nanomaterials as robust ECL emitters and provided a new idea for detection of biomolecules for diagnosis of disease.

Micron-Scale Fabrication of Ultrathin Amorphous Copper Nanosheets Templated by DNA Scaffolds

Two-dimensional (2D) amorphous materials could outperform their crystalline counterparts toward various applications because they have more defects and reactive sites and thus could exhibit a unique surface chemical state and provide an advanced electron/ion transport path. Nevertheless, it is challenging to fabricate ultrathin and large-sized 2D amorphous metallic nanomaterials in a mild and controllable manner due to the strong metallic bonds between metal atoms. Here, we reported a simple yet fast (10 min) DNA nanosheet (DNS)-templated method to synthesize micron-scale amorphous copper nanosheets (CuNSs) with a thickness of 1.9 ± 0.4 nm in aqueous solution at room temperature. We demonstrated the amorphous feature of the DNS/CuNSs by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Interestingly, we found that they could transform to crystalline forms under continuous electron beam irradiation. Of note, the amorphous DNS/CuNSs exhibited much stronger photoemission (∼62-fold) and photostability than dsDNA-templated discrete Cu nanoclusters due to the elevation of both the conduction band (CB) and valence band (VB). Such ultrathin amorphous DNS/CuNSs hold great potential for practical applications in biosensing, nanodevices, and photodevices.

Green-Emissive Copper Nanocluster with Aggregation-Enhanced Emission for Selective Detection of Al3

Selective detection of Al³⁺ is of great significance both for the benefit of human health and environmental safety considerations. In this work, a sensitive and selective fluorescence assay for Al³⁺ was proposed based on the green-emissive Cu nanoclusters (Cu NCs). Different from the commonly reported works, the green emissive Cu NCs showed dual emission bands at 450 and 510 nm, attributed to the reaction product between polyvinyl pyrrolidone and ascorbic acid and the Cu core, respectively. Al³⁺ could induce the aggregation of Cu NCs by forming covalent bonds, which results in the enhancement of photoluminescence intensity. This enhancement phenomenon is rather selective to Al³⁺ , which endows the detection in real samples. These results provide new insights for the fluorescence mechanisms of metal NCs, which also provided a functional luminescent material for various applications, such as chemical sensing, bioimaging and photoelectric devices.

Carborane-thiol protected copper nanoclusters: stimuli-responsive materials with tunable phosphorescence

Atomically precise nanomaterials with tunable solid-state luminescence attract global interest. In this work, we present a new class of thermally stable isostructural tetranuclear copper nanoclusters (NCs), shortly Cu4@oCBT, Cu4@mCBT and Cu4@ICBT, protected by nearly isomeric carborane thiols: ortho-carborane-9-thiol, meta-carborane-9-thiol and ortho-carborane 12-iodo 9-thiol, respectively. They have a square planar Cu4 core and a butterfly-shaped Cu4S4 staple, which is appended with four respective carboranes. For Cu4@ICBT, strain generated by the bulky iodine substituents on the carboranes makes the Cu4S4 staple flatter in comparison to other clusters. High-resolution electrospray ionization mass spectrometry (HR ESI-MS) and collision energy-dependent fragmentation, along with other spectroscopic and microscopic studies, confirm their molecular structure. Although none of these clusters show any visible luminescence in solution, bright μs-long phosphorescence is observed in their crystalline forms. The Cu4@oCBT and Cu4@mCBT NCs are green emitting with quantum yields (Φ) of 81 and 59%, respectively, whereas Cu4@ICBT is orange emitting with a Φ of 18%. Density functional theory (DFT) calculations reveal the nature of their respective electronic transitions. The green luminescence of Cu4@oCBT and Cu4@mCBT clusters gets shifted to yellow after mechanical grinding, but it is regenerated after exposure to solvent vapour, whereas the orange emission of Cu4@ICBT is not affected by mechanical grinding. Structurally flattened Cu4@ICBT didn't show mechanoresponsive luminescence in contrast to other clusters, having bent Cu4S4 structures. Cu4@oCBT and Cu4@mCBT are thermally stable up to 400 °C. Cu4@oCBT retained green emission even upon heating to 200 °C under ambient conditions, while Cu4@mCBT changed from green to yellow in the same window. This is the first report on structurally flexible carborane thiol appended Cu4 NCs having stimuli-responsive tunable solid-state phosphorescence.

Viewing Aggregation-Induced Emission of Metal Nanoclusters from Design Strategies to Applications

Aggregation-induced emission (AIE)-type metal nanoclusters (NCs) represent an innovative type of luminescent metal NCs whose aggregates exhibit superior performance over that of individuals, attracting wide attention over the past decade. Here, we give a concise overview of the progress made in this area, from design strategies to applications. The representative design strategies, including solvent-induction, cation-induction, crystallization-induction, pH-induction, ligand inheritance, surface constraint, and minerals- and MOF-confinement, are first discussed. We then present the typical practical applications of AIE-type metal NCs in the various sectors of bioimaging, biological diagnosis and therapy (e.g., antibacterial agents, cancer radiotherapy), light-emitting diodes (LEDs), detection assays, and circularly polarized luminescence (CPL). To this end, we present our viewpoints on the promises and challenges of AIE-type metal NCs, which may shed light on the design of highly luminescent metal NCs, stimulating new vitality and serving as a continuous boom for the metal NC community in the future.

Ce3+-induced Fluorescence Amplification of Copper Nanoclusters Based on Aggregation-induced Emission for Specific Sensing 2,6-pyridine Dicarboxylic Acid

A straightforward, cost-effective and biocompatible reduction approach was applied to fabricate soluble but non-luminous glutathione-stabilized copper nanocluster (GSH-CuNCs). Surprisingly, as high as 1 × 10³ times fluorescence enhancement was acquired when Ce³⁺ was injected at an extremely low concentration of only 18 µM. Ce³⁺ outperformed other rare-earth metal ions in terms of inducing fluorescence amplification of the non-luminous GSH-CuNCs. Furthermore, Ce³⁺ was employed as inducer for aggregation-induce emission (AIE) effect as well as reactant to coordinate with target of 2,6-pyridine dicarboxylic acid (DPA) due to the stronger coordination ability between Ce³⁺ and DPA than that of Ce³⁺ and GSH. As a result, the Ce³⁺/GSH-CuNCs ensemble was developed as a novel sensor to detect DPA in the "on-off" mode. When DPA was introduced into the sensor, Ce³⁺ failed to interact with GSH and detached from the surface of GSH-CuNCs, leading to fluorescence quenching. In addition, static quenching process and internal filtration effect (IFE) between Ce³⁺/GSH-CuNCs and DPA were also responsible for fluorescence quenching effect. A good linear relationship was obtained from 0.3 µM to 18 µM, with a limit of detection (LOD) of 0.19 µM. The as-proposed probe displayed high specificity to DPA and provided a simple, fast rapid and cheap method for construction this type of ensemble sensors to detect other targets.