Getting into Shape: Reflections on a New Generation of Cylindrical Nanostructures' Self-Assembly Using Polymer Building Blocks

Fully recyclable and tough thermoplastic elastomers from simple bio-sourced δ-valerolactones

While a large number of chemically recyclable thermoplastics have been developed in recent years, technologically important thermoplastic elastomers (TPEs) that are not only bio-based and fully recyclable but also exhibit mechanical properties that can rival or even exceed those petroleum-based, non-recyclable polyolefin TPEs are critically lacking. The key challenge in developing chemically circular, bio-based, high-performance TPEs rests on the complexity of TPE's block copolymer (BCP) structure involving block segments of different suitable monomers required to induce self-assembled morphologies responsible for performance as well as the control and monomer compatibility in their synthesis and the selectivity in their depolymerization. Here we demonstrate the utilization of bio-sourced δ-valerolactone (δVL) and its simple α-alkyl-substituted derivatives to produce all δVL-based polyester tri-BCP TPEs, which exhibit not only complete (closed-loop) chemical recyclability but also excellent toughness that is 2.5-3.8 times higher than commercial polyolefin-based TPEs. The visualized cylindrical morphology formed via crystallization-driven self-assembly in the new all δVL tri-BCP is postulated to contribute to the excellent TPE property.

Alternating vs. random amphiphilic polydisulfides: aggregation, enzyme activity inhibition and redox-responsive guest release

Herein, we report the synthesis of an alternating copolymer (ACP) with a bio-reducible amphiphilic polydisulfide backbone and highlight the impact of the alternating monomer connectivity on the self-assembly, morphology, chain-exchange dynamics, drug-release kinetics, and enzyme activity inhibition. Condensation polymerization between hydrophobic 1,10-bis(pyridin-2-yldisulfaneyl)decane and hydrophilic 2,3-mercaptosuccinic acid (1.04 : 1.00 ratio) generated amphiphilic ACP P1 (Mw = 8450 g mol-1, Đ = 1.3), which exhibited self-assembly in water, leading to the formation of an ultra-thin (height <5.0 nm) entangled fibrillar network. In contrast, structurally similar amphiphilic random copolymer P2 exhibited a truncated irregular disc-like morphology under the same conditions. It is postulated that due to the perfect alternating sequence of the hydrophobic and hydrophilic segments in P1, its immiscibility-driven aggregation in water leads to a pleated structure, which further assembles and forms the observed long fibrillar structures, similar to crystallization-driven self-assembly. In fact, wide-angle X-ray diffraction (WXRD) analysis of a lyophilized P1 sample showed sharp peaks, indicating its crystalline nature (approximately 37% crystallinity), and these were completely missing for P2. The effect of such distinct self-assembly on the chain-exchange dynamics was probed by fluorescence resonance energy transfer (FRET) using 3,3'-dioctadecyloxacarbocyanine perchlorate (DiO) and 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI) as the FRET-donor and -acceptor, respectively. For DiI- and DiO-entrapped solutions of P1, when mixed, no prominent FRET appeared even after 24 h. In sharp contrast, for P2, intense FRET emission occurred, and the FRET ratio (approximately 0.9) reached saturation in approximately 15 h, indicating the greatly enhanced kinetic stability of P1 aggregates. Glutathione-induced release of encapsulated Nile red showed much slower kinetics for P1 compared to that of P2, which was corroborated by the observed slow chain-exchange dynamics of the highly stable alternating copolymer assembly. Furthermore, the well-ordered assembly of P1 exhibited an excellent surface-functional group display (zeta potential of -32 mV compared to -14 mV for P2), which resulted in the effective recognition of the α-chymotrypsin (Cht) protein surface by electrostatic interaction. Consequently, P1 significantly (>70%) suppressed the enzymatic activity of Cht, while in the presence of P2, the enzyme was still active with >70% efficacy.

Antibacterial Nanoplatelets via Crystallization-Driven Self-Assembly of Poly(l-lactide)-Based Block Copolymers

Membrane-active antimicrobial materials are promising substances to fight antimicrobial resistance. Herein, crystallization-driven self-assembly (CDSA) is employed for the preparation of nanoparticles with different morphologies, and their bioactivity is explored. Block copolymers (BCPs) featuring a crystallizable and antimicrobial block were synthesized using a combination of ring-opening and photoiniferter RAFT polymerizations. Subsequently formed nanostructures formed by CDSA could not be deprotected without degradation of the structures. CDSA of deprotected BCPs yielded 2D diamond-shaped nanoplatelets in MeOH, while spherical nanostructures were observed for assembly in water. Platelets exhibited improved antibacterial capabilities against two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) compared to their spherical counterparts. The absence of hemolytic activity leads to the excellent selectivity of platelets. A mechanism based on membrane permeabilization was confirmed via dye-leakage assays. This study emphasized the impact of the shape of nanostructures on their interaction with bacterial cells and how a controlled assembly can improve bioactivity.

Kinetically Controlled Preparation of Worm-like Micelles with Tunable Diameter/Length and Structural Stability

Anisotropic nanoparticles such as worm-like micelles have aroused much attention due to their promising applications from templates to drug delivery. The fabrication of worm-like micelles with tunable structural stability and control over their diameter and length is of great importance but still challenging. Herein, we report a kinetically controlled ring-opening metathesis polymerization-induced self-assembly (ROMPISA) for the robust preparation of kinetically trapped worm-like micelles with tunable diameter/length at enlarged experimental windows by the rational manipulation of kinetic factors, including solvent property, temperature, and π-π stacking effects. The resultant worm structures were thermodynamically metastable and capable of excellent structural stability at room temperature due to the kinetic trapping effect. At elevated temperatures, these thermodynamically metastable worms could undergo morphology evolution into vesicular structures in a controlled manner. Moreover, the structural stability of worms could also be significantly enhanced by in situ cross-linking. Overall, this kinetically controlled ROMPISA opens a new avenue for PISA chemistry that is expected to prepare "smart" polymer materials by manipulating kinetic factors.

Artificial Channels Based on Bottlebrush Polymers: Enhanced Ion Transport Through Polymer Topology Control

Synthetic structures mimicking the transport function of natural ion channel proteins have a wide range of applications, including therapeutic treatments, separation membranes, sensing, and biotechnologies. However, the development of polymer-based artificial channels has been hampered due to the limitation on available models. In this study, we demonstrate the great potential of bottlebrush polymers as accessible and versatile molecular scaffolds for developing efficient artificial ion channels. Adopting the bottlebrush configuration enhanced ion transport activity of the channels compared to their linear analogs. Matching the structure of lipid bilayers, the bottlebrush channel with a hydrophilic-hydrophobic-hydrophilic triblock architecture exhibited the highest activity among the series. Functionalized with urea groups, these channels displayed high anion selectivity. Additionally, we illustrated that the transport properties could be fine-tuned by modifying the chemistry of ion binding sites. This work not only highlights the importance of polymer topology control in channel design, but also reveals the great potential for further developing bottlebrush channels with customized features and diverse functionalities.

Photonic Pigments of Polystyrene-block-Polyvinylpyrrolidone Bottlebrush Block Copolymers via Sustainable Organized Spontaneous Emulsification

Prior studies on photonic pigments of amphiphilic bottlebrush block copolymers (BBCPs) through an organized spontaneous emulsification (OSE) mechanism have been limited to using polyethylene glycol (PEG) as the hydrophilic side chains and toluene as the organic phase. Herein, a family of polystyrene-block-polyvinylpyrrolidone (PS-b-PVP) BBCPs are synthesized with PVP as the hydrophilic block. Biocompatible and sustainable anisole is employed for dissolving the obtained BBCPs followed by emulsification of the solutions in water. Subsequent evaporation of oil-in-water emulsion droplets triggers the OSE mechanism, producing thermodynamically stable water-in-oil-in-water (w/o/w) multiple emulsions with uniform and closely packed internal droplet arrays through the assembly of the BBCPs at the w/o interface. Upon solidification, the homogeneous porous structures are formed within the photonic microparticles that exhibit visible structural colors. The pore diameter is widely tunable (150∼314 nm) by changing the degree of polymerization of BBCP (69∼110), resulting in tunable colors across the whole visible spectrum. This work demonstrates useful knowledge that OSE can be generally used in the fabrication of ordered porous materials with tunable internal functional groups, not only for photonic applications, but also offers a potential platform for catalysis, sensing, separation, encapsulation, etc.

Manipulation of Macrophage Uptake by Controlling the Aspect Ratio of Graft Copolymer Micelles

Nanostructures of drug carriers play a crucial role in nanomedicine due to their ability to influence drug delivery. There is yet no clear consensus regarding the optimal size and shape (e.g., aspect ratio) of nanoparticles for minimizing macrophage uptake, given the difficulties in controlling the shape and size of nanoparticles while maintaining identical surface properties. Here, we employed graft copolymer self-assembly to prepare polymer micelles with aspect ratios ranging from 1.0 (spherical) to 10.8 (cylindrical) and closely matched interfacial properties. Notably, our findings emphasize that cylindrical micelles with an aspect ratio of 2.4 are the least susceptible to macrophage uptake compared with both their longer counterparts and spherical micelles. This reduced uptake of the short cylindrical micelles results in a 3.3-fold increase in blood circulation time compared with their spherical counterparts. Controlling the aspect ratio of nanoparticles is crucial for improving drug delivery efficacy through better nanoparticle design.

Bottlebrush Block Copolymers at the Interface of Immiscible Liquids: Adsorption and Lateral Packing

Amphiphilic bottlebrush block copolymers (BBCPs), having a hydrophilic bottlebrush polymer (BP) linked covalently to a hydrophobic BP, were found to segregate to liquid-liquid interfaces to minimize the free energy of the system. The key parameter influencing the outcome of the experiments is the ratio between the degree of polymerization of the backbone (NBB) and that of the side-chain brushes (NSC). Specifically, a spherical, star-like configuration results when NBB < NSC, while a cylindrical, bottlebrush-like shape is preferred when NBB > NSC. Dynamic interfacial tension (γ) and fluorescence recovery after photobleaching (FRAP) measurements show that the BBCP configuration influences the areal density and in-plane diffusion at the fluid interface. The characteristic relaxation times associated with BBCP adsorption (τA) and reorganization (τR) were determined by fitting time-dependent interfacial tension measurements to a sum of two exponential relaxation functions. Both τA and τR initially increased with NBB up to 92 repeat units, due to the larger hydrodynamic radius in solution and slower in-plane diffusivity, attributed to a shorter cross-sectional diameter of the side-chains near the block junction. This trend reversed at NBB = 190, with shorter τA and τR attributed to increased segregation strength and exposure of the bare water/toluene interface due to tilting and/or wiggling of the backbone chains, respectively. The adsorption energy barrier decreased with higher NBB, due to a reduced BBCP packing density at the fluid interface. This study provides fundamental insights into macromolecular assembly at fluid interfaces, as it pertains to unique bottlebrush block architectures.

Shape Transformation of Polymer Vesicles

Life activities, such as respiration, are accomplished through the continuous shape modulation of cells, tissues, and organs. Developing smart materials with shape-morphing capability is a pivotal step toward life-like systems and emerging technologies of wearable electronics, soft robotics, and biomimetic actuators. Drawing inspiration from cells, smart vesicular systems have been assembled to mimic the biological shape modulation. This would enable the understanding of cellular shape adaptation and guide the design of smart materials with shape-morphing capability. Polymer vesicles assembled by amphiphilic molecules are an example of remarkable vesicular systems. The chemical versatility, physical stability, and surface functionality promise their application in nanomedicine, nanoreactor, and biomimetic systems. However, it is difficult to drive polymer vesicles away from equilibrium to induce shape transformation due to the unfavorable energy landscapes caused by the low mobility of polymer chains and low permeability of the vesicular membrane. Extensive studies in the past decades have developed various methods including dialysis, chemical addition, temperature variation, polymerization, gas exchange, etc., to drive shape transformation. Polymer vesicles can now be engineered into a variety of nonspherical shapes. Despite the brilliant progress, most of the current studies regarding the shape transformation of polymer vesicles still lie in the trial-and-error stage. It is a grand challenge to predict and program the shape transformations of polymer vesicles. An in-depth understanding of the deformation pathway of polymer vesicles would facilitate the transition from the trial-and-error stage to the computing stage. In this Account, we introduce recent progress in the shape transformation of polymer vesicles. To provide an insightful analysis, the shape transformation of polymer vesicles is divided into basic and coupled deformation. First, we discuss the basic deformation of polymer vesicles with a focus on two deformation pathways: the oblate pathway and the prolate pathway. Strategies used to trigger different deformation pathways are introduced. Second, we discuss the origin of the selectivity of two deformation pathways and the strategies used to control the selectivity. Third, we discuss the coupled deformation of polymer vesicles with a focus on the switch and coupling of two basic deformation pathways. Last, we analyze the challenges and opportunities in the shape transformation of polymer vesicles. We envision that a systematic understanding of the deformation pathway would push the shape transformation of polymer vesicles from the trial-and-error stage to the computing stage. This would enable the prediction of deformation behaviors of nanoparticles in complex environments, like blood and interstitial tissue, and access to advanced architecture desirable for man-made applications.

Degradable Block Copolymer Nanoparticles Synthesized by Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) combines polymerization and in situ self-assembly of block copolymers in one system and has become a widely used method to prepare block copolymer nanoparticles at high concentrations. The persistence of polymers in the environment poses a huge threat to the ecosystem and represents a significant waste of resources. There is an urgent need to develop novel chemical approaches to synthesize degradable polymers. To meet with this demand, it is crucial to install degradability into PISA nanoparticles. Most recently, degradable PISA nanoparticles have been synthesized by introducing degradation mechanisms into either shell-forming or core-forming blocks. This Minireview summarizes the development in degradable block copolymer nanoparticles synthesized by PISA, including shell-degradable, core-degradable, and all-degradable nanoparticles. Future development will benefit from expansion of polymerization techniques with new degradation mechanisms and adaptation of high-throughput approaches for both PISA syntheses and degradation studies.

Mechanism of Action and Design of Potent Antibacterial Block Copolymer Nanoparticles

Self-assembled polymer nanoparticles are promising antibacterials, with nonspherical morphologies of particular interest as recent work has demonstrated enhanced antibacterial activity relative to their spherical counterparts. However, the reasons for this enhancement are currently unclear. We have performed a multifaceted analysis of the antibacterial mechanism of action of 1D nanofibers relative to nanospheres by the use of flow cytometry, high-resolution microscopy, and evaluations of the antibacterial activity of pristine and tetracycline-loaded nanoparticles. Low-length dispersity, fluorescent diblock copolymer nanofibers with a crystalline poly(fluorenetrimethylenecarbonate) (PFTMC) core (length = 104 and 472 nm, height = 7 nm, width = 10-13 nm) and a partially protonated poly(dimethylaminoethyl methacrylate) (PDMAEMA) corona (length = 12 nm) were prepared via seeded growth living crystallization-driven self-assembly. Their behavior was compared to that of analogous nanospheres containing an amorphous PFTMC core (diameter of 12 nm). While all nanoparticles were uptaken into Escherichia coli W3110, crystalline-core nanofibers were observed to cause significant bacterial damage. Drug loading studies indicated that while all nanoparticle antibacterial activity was enhanced in combination with tetracycline, the enhancement was especially prominent when small nanoparticles (ca. 15-25 nm) were employed. Therefore, the identified differences in the mechanism of action and the demonstrated consequences for nanoparticle size and morphology control may be exploited for the future design of potent antibacterial agents for overcoming antibacterial resistance. This study also reinforces the requirement of morphological control over polymer nanoparticles for biomedical applications, as differences in activity are observed depending on their size, shape, and core-crystallinity.

Understanding the Seeded Heteroepitaxial Growth of Crystallizable Polymers: The Role of Crystallization Thermodynamics

Seeded heteroepitaxial growth is a "living" crystallization-driven self-assembly (CDSA) method that has emerged as a promising route to create uniform segmented nanoparticles with diverse core chemistries by using chemically distinct core-forming polymers. Our previous results have demonstrated that crystallization kinetics is a key factor that determines the occurrence of heteroepitaxial growth, but an in-depth understanding of controlling heteroepitaxy from the perspective of crystallization thermodynamics is yet unknown. Herein, we select crystallizable aliphatic polycarbonates (PxCs) with a different number of methylene groups (xCH2, x = 4, 6, 7, 12) in their repeating units as model polymers to explore the effect of lattice match and core compatibility on the seeded growth behavior. Seeded growth of PxCs-containing homopolymer/block copolymer blend unimers from poly(ε-caprolactone) (PCL) core-forming seed platelet micelles exhibits distinct crystal growth behavior at subambient temperatures, which is governed by the lattice match and core compatibility. A case of seeded growth with better core compatibility and a smaller lattice mismatch follows epitaxial growth, where the newly created crystal domain has the same structural orientation as the original platelet substrate. In contrast, a case of seeded growth with better core compatibility but a larger lattice mismatch shows nonepitaxial growth with less-defined crystal orientations in the platelet plane. Additionally, a case of seeded growth with poor core compatibility and larger lattice mismatch results in polydisperse platelet micelles, whereby crystal formation is not nucleated from the crystalline substrate. These findings reveal important factors that govern the specific crystal growth during a seeded growth approach by using compositionally distinct cores, which would further guide researchers in designing 2D segmented materials via polymer crystallization approaches.

Azobenzene-Containing Liquid Crystalline Twisted Ribbons via Polymerization-Induced Hierarchical Self-Assembly

Polymerization-induced self-assembly incorporating liquid crystallization, as a polymerization-induced hierarchical self-assembly (PIHSA) method to produce polymeric particles with anisotropic morphologies facilely and efficiently, has drawn wide attention recently. However, the means of regulating the morphologies of liquid crystalline (LC) polymer assemblies still need to be explored. Herein, a route is presented to fabricate the twisted ribbons via PIHSA containing azobenzene based on poor reversible addition-fragmentation chain transfer (RAFT) control, called poorly controlled PIHSA. Cyano-4-(dodecylsulfanylthiocarbonyl)sulfanyl pentanoic acid-2-(2-pyridyldithio) ethyl ester is used as the RAFT agent with poor controllability, and the morphological evolution from ribbons to twisted ribbons can be observed in the corresponding PIHSA system. The formation mechanism of the twisted ribbons is studied systematically and the broad molecular weight distribution is considered to be the decisive factor. Moreover, the supramolecular chirality induced by symmetry breaking is also related to the twist of the ribbons. This study enriches the methods of controlling the morphologies of LC polymer particles and is helpful for further clarifying the mechanism of PIHSA.

A Smart Single-Fluorophore Polymer: Self-Assembly Shapechromic Multicolor Fluorescence and Erasable Ink

A novel smart fluorescent polymer polyethyleneimine-grafted pyrene (PGP) is developed by incorporating four stimuli-triggers at molecular level. The triggers are amphiphilicity, supramolecular host-guest sites, pyrene fluorescence indicator, and reversible chelation sites. PGP exhibits smart deformation and shape-dependent fluorescence in response to external stimuli. It can deform into three typical shapes with a characteristic fluorescence color, namely, spherical core-shell micelles of cyan-green fluorescence, standard rectangular nanosheets of yellow fluorescence, and irregular branches of deep-blue fluorescence. A quasi-reversible deformation between the first two shapes can be dynamically manipulated. Moreover, driven by reversible coordination and the resulting intramolecular photoinduced electron transfer, PGP can be used as an aqueous fluorescence ink with erasable and recoverable properties. The fluorescent patterns printed by PGP ink on paper can be rapidly erased and recovered by simple spraying a sequence of Cu2+ and ethylene diamine tetraacetic acid aqueous solutions. This erase/recover transformation can be repeated multiple times on the same paper. The multiple stimulus responsiveness of PGP makes it have potential applications in nanorobots, sensing, information encryption, and anticounterfeiting.

Tailored Energy Funneling in Photocatalytic π-Conjugated Polymer Nanofibers for High-Performance Hydrogen Production

The creation of artificial high-performance photosynthetic assemblies with a tailorable antenna system to deliver absorbed solar energy to a photosynthetic reaction center, thereby mimicking biological photosynthesis, remains a major challenge. We report the construction of recyclable, high-performance photosynthetic nanofibers with a crystalline π-conjugated polyfluorene core as an antenna system that funnels absorbed solar energy to spatially defined sensitized Co(II) porphyrin photocatalysts for the hydrogen evolution reaction. Highly effective energy funneling was achieved by tuning the dimensions of the nanofibers to exploit the very long exciton diffusion lengths (>200 nm) associated with the highly crystalline polyfluorene core formed using the living crystallization-driven self-assembly seeded growth method. This enabled efficient solar light-driven hydrogen production from water with a turnover number of over 450 for 8 h of irradiation, an H2 production rate of ca. 65 mmol h-1 g-1, and an overall quantum yield of 0.4% in the wavelength region (<405 nm) beyond the absorption of the molecular photocatalyst. The strategy of using a tailored antenna system based on π-conjugated polymers and maximizing exciton transport to a reaction center reported in this work opens up future opportunities for potential applications in other fields such as solar overall water splitting, CO2 reduction, and photocatalytic small molecule synthesis.

Seeded RAFT Polymerization-Induced Self-assembly: Recent Advances and Future Opportunities

Over the past decade, polymerization-induced self-assembly (PISA) has fully proved its versatility for scale-up production of block copolymer nanoparticles with tunable sizes and morphologies; yet, there are still some limitations. Recently, seeded PISA approaches combing PISA with heterogeneous seeded polymerizations have been greatly explored and are expected to overcome the limitations of traditional PISA. In this review, recent advances in seeded PISA that have expanded new horizons for PISA are highlighted including i) general considerations for seeded PISA (e.g., kinetics, the preparation of seeds, the selection of monomers), ii) morphological evolution induced by seeded PISA (e.g., from corona-shell-core nanoparticles to vesicles, vesicles-to-toroid, disassembly of vesicles into nanospheres), and iii) various well-defined nanoparticles with hierarchical and sophisticated morphologies (e.g., multicompartment micelles, porous vesicles, framboidal vesicles, AXn -type colloidal molecules). Finally, new insights into seeded PISA and future perspectives are proposed.

Polymeric Bowl-Shaped Nanoparticles: Hollow Structures with a Large Opening on the Surface

Polymeric bowl-shaped nanoparticles (BNPs) are anisotropic hollow structures with large openings on the surface, which have shown advantages such as high specific area and efficient encapsulation, delivery and release of large-sized cargoes on demand compared to solid nanoparticles or closed hollow structures. Several strategies have been developed to prepare BNPs based on either template or template-free methods. For instance, despite the widely used self-assembly strategy, alternative methods including emulsion polymerization, swelling and freeze-drying of polymeric spheres, and template-assisted approaches have also been developed. It is attractive but still challenging to fabricate BNPs due to their unique structural features. However, there is still no comprehensive summary of BNPs up to now, which significantly hinders the further development of this field. In this review, the recent progress of BNPs will be highlighted from the perspectives of design strategies, preparation methods, formation mechanisms, and emerging applications. Moreover, the future perspectives of BNPs will also be proposed.

Synthesis of Bottlebrush Polymers by Z-/E-Specific Living Ring-Opening Metathesis Polymerization, Exhibiting Different Thermal Properties

Synthesis of bottlebrush polymers (BBPs) and block copolymers by Z-/E-specific living ring-opening metathesis polymerization (ROMP) of N-substituted-norbornene-2,3-dicarboximides containing long alkyl chains (n-octadecyl, n-tetradecyl, etc.) has been attained by the vanadium(V)-alkylidene catalysts V(CHSiMe3)(ArN)[OC(CF3)3](PMe3)2 [Ar = 2,6-Cl2C6H3 (1), C6F5 (2)] and V(CHSiMe3)(2,6-F2C6H3N)(OC6Cl5)(PMe3)2 (3). The ROMPs using 1 afforded the BBPs with exclusive Z selectivity (98 to >99% cis) even at high temperature (up to 80 °C) in the presence of PMe3, whereas the ROMPs using 3 gave the BBPs with high E selectivity (90% trans). These ROMPs proceeded in a living manner (even at 80 °C using 1), affording various (amphiphilic) block copolymers while maintaining high E/Z selectivity. The resultant Z- and E-selective BBPs especially prepared from N-(n-octadecyl)norbornene-2,3-dicarboximide possessed different melting temperatures due to different degrees of interpolymer alkyl side chain interaction (side chain crystallization).

Protein-Inspired Control over Synthetic Polymer Folding for Structured Functional Nanoparticles in Water

The folding of proteins into functional nanoparticles with defined 3D structures has inspired chemists to create simple synthetic systems mimicking protein properties. The folding of polymers into nanoparticles in water proceeds via different strategies, resulting in the global compaction of the polymer chain. Herein, we review the different methods available to control the conformation of synthetic polymers and collapse/fold them into structured, functional nanoparticles, such as hydrophobic collapse, supramolecular self-assembly, and covalent cross-linking. A comparison is made between the design principles of protein folding to synthetic polymer folding and the formation of structured nanocompartments in water, highlighting similarities and differences in design and function. We also focus on the importance of structure for functional stability and diverse applications in complex media and cellular environments.

High-resolution cryo-electron microscopy structure of block copolymer nanofibres with a crystalline core

Seeded growth of crystallizable block copolymers and π-stacking molecular amphiphiles in solution using living crystallization-driven self-assembly is an emerging route to fabricate uniform one-dimensional and two-dimensional core-shell micellar nanoparticles of controlled size with a range of potential applications. Although experimental evidence indicates that the crystalline core of these nanomaterials is highly ordered, a direct observation of their crystal lattice has not been successful. Here we report the high-resolution cryo-transmission electron microscopy studies of vitrified solutions of nanofibres made from a crystalline core of poly(ferrocenyldimethylsilane) (PFS) and a corona of polysiloxane grafted with 4-vinylpyridine groups. These studies show that poly(ferrocenyldimethylsilane) chains pack in an 8-nm-diameter core lattice with two-dimensional pseudo-hexagonal symmetry that is coated by a 27 nm 4-vinylpyridine corona with a 3.5 nm distance between each 4-vinylpyridine strand. We combine this structural information with a molecular modelling analysis to propose a detailed molecular model for solvated poly(ferrocenyldimethylsilane)-b-4-vinylpyridine nanofibres.

Atomic-Scale Corrugations in Crystalline Polypeptoid Nanosheets Revealed by Three-Dimensional Cryogenic Electron Microscopy

Amphiphilic molecules that can crystallize often form molecularly thin nanosheets in aqueous solutions. The possibility of atomic-scale corrugations in these structures has not yet been recognized. We have studied the self-assembly of amphiphilic polypeptoids, a family of bio-inspired polymers that can self-assemble into various crystalline nanostructures. Atomic-scale structure of the crystals in these systems has been inferred using both X-ray diffraction and electron microscopy. Here we use cryogenic electron microscopy to determine the in-plane and out-of-plane structures of a crystalline nanosheet. Data were collected as a function of tilt angle and analyzed using a hybrid single-particle crystallographic approach. The analysis reveals that adjacent rows of peptoid chains, which are separated by 4.5 Å in the plane of the nanosheet, are offset by 6 Å in the direction perpendicular to the plane of the nanosheet. These atomic-scale corrugations lead to a doubling of the unit cell dimension from 4.5 to 9 Å. Our work provides an alternative interpretation for the observed Å X-ray diffraction peak often reported in polypeptoid crystals.

Charge-Transfer-Induced Self-Assembly of Doped Conjugated Block Copolymer Nanofibers

Here, we report charge-transfer-driven self-assembly of conjugated block copolymers (BCP) into highly doped conjugated polymer nanofibers. The ground-state integer charge transfer (ICT) between a BCP composed of poly(3-hexylthiophene) and poly(ethylene oxide) (P3HT-b-PEO) and electron-deficient 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) induced spontaneous self-assembly of the donor and the acceptor into well-defined one-dimensional nanofibers. The presence of the PEO block plays an important role for the self-assembly by providing a polar environment that can stabilize nanoscale charge transfer (CT) assemblies. The doped nanofibers were responsive to various external stimuli such as heat, chemical, and light and exhibited efficient photothermal properties in the near-IR region. The CT-driven BCP self-assembly reported here provides a new platform for the fabrication of highly doped semiconductor nanostructures.

Fluorination Effects on the Drug Delivery Property of Cylindrical Polymer Brushes

Fluorination has been widely applied to improving the properties of small-molecule drugs. However, relatively little is known about the effects of fluorination on the drug delivery property of nanomaterials. In this paper, we synthesized a fluoroalkane-modified cylindrical polymer brush (CPB) BCPB-F and an alkane-modified analogue BCPB-H. Doxorubicin (DOX) was used as a model drug and was loaded onto the CPBs through a pH-responsive acylhydrazone linkage. High drug loading and good water solubility were achieved. The in vitro and in vivo experiments suggested that fluorination played an important role in improving the cellular uptake, blood circulation, tissue permeability, and tumor targeting ability of CPBs. Due to these superiorities, the DOX-loaded BCPB-F exhibited excellent antitumor efficacy and eradicated the tumors of mice after five-dose treatments. The well-defined structures of the drug-free and drug-loaded CPBs guaranteed the accuracy of the results. This work demonstrates that fluorination is a promising strategy to improve the overall properties of nanomedicines.

Tunable Antireflection Properties with Self-Assembled Nanopillar and Nanohole Structure

Nanostructure engineering has proven to be one of the most effective strategies to improve the efficiency of photoelectric devices. Herein, we numerically investigate and experimentally demonstrate a self-assembled silicon-based nanopillars and nanoholes structures, to improve the light absorption of photoelectric devices by an antireflection enhancement. The nanopillars and nanoholes structures are fabricated by the air-liquid interface self-assembly method based on polystyrene (PS) nanospheres. Additionally, the tunable antireflective properties with the different operation wavelength and nanostructures parameters have been discussed based on the Finite-Difference Time-Domain (FDTD) method. The experimental result shows that the self-assembled silicon-based nanopillars and nanoholes structures can achieve the lowest reflectivity of 1.42% (nanopillars) and 5.83% (nanoholes) in the wavelength range of 250-800 nm, which reduced 95.97% and 84.83%, respectively, compared with the plane silicon. The operation mechanism of the tunable antireflective property of self-assembled nanopillars and nanoholes structures is also analyzed in the simulation. Our study suggests that the self-assembled nanopillars and nanoholes structures are potentially attractive as improving efficiency of photoelectric devices.

Poly(vinyl alcohol) Molecular Bottlebrushes Nucleate Ice

Ice binding proteins (IBP) have evolved to limit the growth of ice but also to promote ice formation by ice-nucleating proteins (INPs). IBPs, which modulate these seemingly distinct processes, often have high sequence similarities, and molecular size/assembly is hypothesized to be a crucial determinant. There are only a few synthetic materials that reproduce INP function, and rational design of ice nucleators has not been achieved due to outstanding questions about the mechanisms of ice binding. Poly(vinyl alcohol) (PVA) is a water-soluble synthetic polymer well known to effectively block ice recrystallization, by binding to ice. Here, we report the synthesis of a polymeric ice nucleator, which mimics the dense assembly of IBPs, using confined ice-binding polymers in a high-molar-mass molecular bottlebrush. Poly(vinyl alcohol)-based molecular bottlebrushes with different side-chain densities were synthesized via a combination of ring-opening metathesis polymerization (ROMP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, using "grafting-to" and "grafting-through" approaches. The facile preparation of the PVA bottlebrushes was performed via selective hydrolysis of the acetate of the poly(vinyl acetate) (PVAc) side chains of the PVAc bottlebrush precursors. Ice-binding polymer side-chain density was shown to be crucial for nucleation activity, with less dense brushes resulting in colder nucleation than denser brushes. This bio-inspired approach provides a synthetic framework for probing heterogeneous ice nucleation and a route toward defined synthetic nucleators for biotechnological applications.

Porous Polymer Cubosomes with Ordered Single Primitive Bicontinuous Architecture and Their Sodium-Iodine Batteries

Bicontinuous porous materials, which possess 3D interconnected pore channels facilitating a smooth mass transport, have attracted much interest in the fields of energy and catalysis. However, their synthesis remains very challenging. We report a general approach, using polymer cubosomes as the template, for the controllable synthesis of bicontinuous porous polymers with an ordered single primitive (SP) cubic structure, including polypyrrole (SP-PPy), poly-m-phenylenediamine (SP-PmPD), and polydopamine (SP-PDA). Specifically, the resultant SP-PPy had a unit cell parameter of 99 nm, pore diameter of 45 nm, and specific surface area of approximately 60 m²·g^-1. As a proof of concept, the I₂-adsorbed SP-PPy was employed as the cathode materials of newly emerged Na-I₂ batteries, which delivered a record-high specific capacity (235 mA·h·g^-1 at 0.5 C), excellent rate capability, and cycling stability (with a low capacity decay of 0.12% per cycle within 400 cycles at 1 C). The advantageous contributions of the bicontinuous structure and I₃^- adsorption mechanism of SP-PPy were revealed by a combination of ion diffusion experiments and theoretical calculations. This study opens a new avenue for the synthesis of porous polymers with new topologies, broadens the spectrum of bicontinuous-structured materials, and also develops a novel potential application for porous polymers.

Linear and Star Block Copolymer Nanoparticles Prepared by Heterogeneous RAFT Polymerization Using an ω,ω-Heterodifunctional Macro-RAFT Agent

Herein, an ω,ω-heterodifunctional macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agent containing two different RAFT end groups was synthesized and employed to mediate aqueous photoinitiated RAFT dispersion polymerization of a methacrylic monomer. Because of the different RAFT controllability of two RAFT end groups toward methacrylic monomers, the RAFT end group with good controllability dominated the polymerization while the other RAFT end group with poor controllability was unreacted, leading to the formation of linear block copolymers. Because of the unique structure of the linear block copolymers, a diverse set of block copolymer nanoparticles with rich RAFT groups at the interface of the hydrophilic corona/the hydrophobic core were successfully prepared. Finally, μ-A(BC)C miktoarm star block copolymer nanoparticles were prepared by RAFT seeded emulsion polymerization of an acrylic monomer, which enables the further morphological control over polymer nanoparticles. We believe that the utilization of an ω,ω-heterodifunctional macro-RAFT agent in heterogeneous RAFT polymerization will offer considerable opportunities for the rational synthesis of well-defined molecular architectures and polymer nanoparticles.

Bioinspired Bottlebrush Polymers for Aqueous Boundary Lubrication

An extremely efficient lubrication system is achieved in synovial joints by means of bio-lubricants and sophisticated nanostructured surfaces that work together. Molecular bottlebrush structures play crucial roles for this superior tribosystem. For example, lubricin is an important bio-lubricant, and aggrecan associated with hyaluronan is important for the mechanical response of cartilage. Inspired by nature, synthetic bottlebrush polymers have been developed and excellent aqueous boundary lubrication has been achieved. In this review, we summarize recent experimental investigations of the interfacial lubrication properties of surfaces coated with bottlebrush bio-lubricants and bioinspired bottlebrush polymers. We also discuss recent advances in understanding intermolecular synergy in aqueous lubrication including natural and synthetic polymers. Finally, opportunities and challenges in developing efficient aqueous boundary lubrication systems are outlined.

Effects of oppositely charged moieties on the self-assembly and biophysicochemical properties of polyurethane micelles

Gemini quaternary ammonium (GQA), a type of cationic surfactant, exhibits excellent micellization ability and acts as a cell internalization promoter to increase the permeability of the cell membrane. GQA is sensitive to ionic solutions, which disturb its stabilization and leads to the rapid degradation of its polymer micelles due to its unique hydrophilic N⁺ structure. However, the effect of negatively charged moieties in the polymer chains of GQA on its action in polymer micelles, typically with regard to its micellization and biological performance, remains unclear. In this work, a series of polyurethane micelles containing various ratios of oppositely charged moieties was prepared. We found that the interchain electrostatic interaction severely undermines the function of the GQA surfactant and hinders the self-assembly and stabilization of polyurethane micelles. Specifically, a hydrophilic corona with a longer length cannot completely overcome this effect. By regulating the ratio of oppositely charged moieties, micelles exhibited tunable biological properties, such as biocompatibility, cytotoxicity, cell internalization, and phagocytosis by macrophages. Based on our results, a moderate molecular weight of mPEG (Mn = 1900) and a slight positive surface potential (∼10 mV) are the best surface parameters for the comprehensive performance of the studied nanoplatforms. This study provides a further understanding of the electrostatic interaction effect on the properties of the cationic GQA, offering rational guidance for the design and fabrication of GQA polymer micelles.

(Bio)degradable and Biocompatible Nano-Objects from Polymerization-Induced and Crystallization-Driven Self-Assembly

Polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) techniques have emerged as powerful approaches to produce a broad range of advanced synthetic nano-objects with high potential in biomedical applications. PISA produces nano-objects of different morphologies (e.g., spheres, vesicles and worms), with high solids content (∼10-50 wt %) and without additional surfactant. CDSA can finely control the self-assembly of block copolymers and readily forms nonspherical crystalline nano-objects and more complex, hierarchical assemblies, with spatial and dimensional control over particle length or surface area, which is typically difficult to achieve by PISA. Considering the importance of these two assembly techniques in the current scientific landscape of block copolymer self-assembly and the craze for their use in the biomedical field, this review will focus on the advances in PISA and CDSA to produce nano-objects suitable for biomedical applications in terms of (bio)degradability and biocompatibility. This review will therefore discuss these two aspects in order to guide the future design of block copolymer nanoparticles for future translation toward clinical applications.

Stimuli-Responsive Pickering Emulsions Regulated via Polymerization-Induced Self-Assembly Nanoparticles

With the development of reversible deactivated radical polymerization techniques, polymerization-induced self-assembly (PISA) is emerging as a facile method to prepare block copolymer nanoparticles in situ with high concentrations, providing wide potential applications in different fields, including nanomedicine, coatings, nanomanufacture, and Pickering emulsions. Polymeric emulsifiers synthesized by PISA have many advantages comparing with conventional nanoparticle emulsifiers. The morphologies, size, and amphiphilicity can be readily regulated via the synthetic process, post-modification, and external stimuli. By introducing stimulus responsiveness into PISA nanoparticles, Pickering emulsions stabilized with these nanoparticles can be endowed with "smart" behaviors. The emulsions can be regulated in reversible emulsification and demulsification. In this review, the authors focus on recent progress on Pickering emulsions stabilized by PISA nanoparticles with stimuli-responsiveness. The factors affecting the stability of emulsions during emulsification and demulsification are discussed in details. Furthermore, some viewpoints for preparing stimuli-responsive emulsions and their applications in antibacterial agents, diphase reaction platforms, and multi-emulsions are discussed as well. Finally, the future developments and applications of stimuli-responsive Pickering emulsions stabilized by PISA nanoparticles are highlighted.

Polymerization-Induced Self-Assembly (PISA) for in situ drug encapsulation or drug conjugation in cancer application

HYPOTHESIS

We describe the possibility of using the same block copolymer carriers prepared by PISA for in situ drug encapsulation or drug conjugation.

EXPERIMENTS

Block copolymers containing poly((ethylene glycol) methacrylate)-co-poly(pentafluorophenyl methacrylate)-b-poly(hydroxypropyl methacrylate) (P((PEGMA-co-PFBMA)-b-PHPMA)) were synthesized at 10 wt% using PISA. The first approach involved in situ Doxorubicin (DOX) loading during PISA, while the second exhibited surface functionalization of PISA-made vesicles with dual drug therapies, N-acetyl cysteine (NAC) and DOX using para-fluoro-thiol reaction (PFTR) and carbodiimide chemistry, respectively. Cytotoxicity, cell uptake, and cell apoptosis were assessed on MDA-MB-231 cell lines.

FINDINGS

P((PEGMA-co-PFBMA)-b-PHPMA) nanocarriers were prepared, showing size and shape transformations from spheres, cylinders to raspberry-forming vesicles. DOX was readily loaded into NPs during PISA with relatively high encapsulation efficiency of 70 %, whereas the plain PISA-made vesicles could be functionalized with NAC and DOX at high yields. DOX-free NPs showed biocompatibility, whilst DOX-conjugated NPs imparted a concentration-dependent cytotoxicity, as well as an enhanced cell uptake compared to free DOX. The results demonstrated that the same PISA-derived self-assemblies enabled either in situ drug encapsulation, or post-polymerization surface engineering with useful functionalities upon tuning the macro-CTA block, thus holding promises for future drug delivery and biomedical applications.

Thermal kinetics, thermodynamics, decomposition mechanism, and thermal safety performance of typical ammonium perchlorate-based molecular perovskite energetic materials

In this work, we report the thermal kinetics, thermodynamics, and decomposition mechanism of AP-based molecular perovskite energetic materials and estimate their thermal safety performance. Typical AP-based molecular perovskite energetic materials, (H2dabco)[NH4(ClO4)3] (DAP-4), (H2pz)[NH4(ClO4)3](PAP-4), (H2mpz)[NH4(ClO4)3](PAP-M4), and (H2hpz)[NH4(ClO4)3] (PAP-H4), were synthesized and characterized. These were studied using differential scanning calorimetry (DSC). The results show that all of the obtained AP-based molecular perovskite energetic materials have higher thermal decomposition temperatures, and the peak temperatures are more than 360 °C. All follow random nucleation and growth models. Other thermodynamic parameters, such as the reaction enthalpy (ΔH), entropy change (ΔS), and Gibbs free energy (ΔG), show that they are generally thermodynamically stable. Moreover, their adiabatic induced temperatures were obtained; TD24 of DAP-4, PAP-4, PAP-M4, and PAP-H4 were 246.6, 201.2, 194.5, and 217.5 °C, respectively. This study offers an important and in-depth understanding of the thermal decomposition characteristics of AP-based molecular perovskite energetic materials and their potential applications.

Thermo/pH dual-responsive micelles based on the host-guest interaction between benzimidazole-terminated graft copolymer and β-cyclodextrin-functionalized star block copolymer for smart drug delivery

Novel temperature and pH dual-sensitive amphiphilic micelles were fabricated exploiting the host-guest interaction between benzimidazole-terminated PHEMA-g-(PCL-BM) and β-CD-star-PMAA-b-PNIPAM. The fabricated graft copolymer had a brush-like structure with star side chains. The micelles were utilized as dual-responsive nanocarriers and showed the LCST between 40 and 41 °C. The acidic pH promoted the dissociation of the PHEMA-g-(PCL-BM: β-CD-star-PMAA-b-PNIPAM) micelles. DOX.HCl was loaded into the core of the micelles during self-assembly in an aqueous solution with a high encapsulation efficacy (97.3%). The average size of the amphiphilic micelles was about 80 nm, suitable size for the enhanced permeability and retention effect in tumor vasculature. In an aqueous environment, these micelles exhibited very good self-assembly ability, low CMC value, rapid pH- and thermo-responsiveness, optimal drug loading capacity, and effective release of the drug. The biocompatibility was confirmed by the viability assessment of human breast cancer cell line (MCF-7) through methyl tetrazolium assay. DOX-loaded micelles displayed excellent anti-cancer activity performance in comparison with free DOX.