Two-Dimensional Hybrid Perovskite-Type Ferroelectric for Highly Polarization-Sensitive Shortwave Photodetection

Band-Edge Mixture Engineered Giant and Switchable Shift Current Generation

Two-dimensional materials have enormous development prospects in the bulk photovoltaic effect (BPVE). The enhancement and manipulation of the BPVE are some of the key roles of its various applications. Through a simplified Hamiltonian model, this work shows that a substantial band mixture between occupied and unoccupied states could produce a large optical absorption rate with trivial topological features, resulting in a significantly enhanced shift current generation. Furthermore, this mechanism is illustrated in a realistic C3B/C3N bilayer material based on density functional theory calculation and tight-binding model. As each layer of C3B/C3N is centrosymmetric, the in-plane shift current arises from the interfacial interaction. The electron transfer between the layers gives a controllable band mixture, which offers a giant shift current reaching over ∼1500 μA/V2. In addition, we propose that interlayer sliding could reverse the in-plane shift current. Our work suggests a feasible approach for giant and switchable nonlinear optical processes.

Anomalous Behavior in Dark-Bright Splitting Impacts the Biexciton Binding Energy in (BA)2(MA)n-1PbnBr3n+1 (n = 1-3)

Two-dimensional Ruddlesden-Popper series are an excellent system for tuning physical properties of the perovskite by controlling the layer number (n). For instance, bandgap and exciton binding energies of the series gradually increase upon reducing n via enhanced quantum and dielectric confinements. Here, we present findings that challenge the anticipated trend in electron-hole exchange interaction within (BA)2MAn-1PbnBr3n+1 (n = 1-3), which causes spin-dependent exciton level splitting into bright and dark states, where the latter is partially visible near the surface of the Br-based two-dimensional Ruddlesden-Popper series. Contrary to expectations, the smallest gap between bright and dark exciton levels is observed from n = 2 at 10 K. This anomaly results in the strongest biexciton binding between two dark excitons occurring at n = 2, rather than at n = 1 as initially hypothesized. The observed anomaly arises from a phase transition induced by octahedral tilting occurring only for n = 2 near 100 K as confirmed by temperature-dependent optical and X-ray diffraction measurements. Our results show that Coulomb interaction need not vary gradually with n, which can impact the optoelectronic properties of the Ruddlesden-Popper series.

Achieving High Operating-Temperature Self-powered X-Ray Detection in Multilayered Hybrid Perovskites through Arylamine Intercalation

Polar metal halide hybrid perovskites (PHPs) that exhibit outstanding bulk photovoltaic effect (BPVE), excellent semiconductor features, and strong radiation absorption ability, have shown prominent advantages in highly sensitive direct X-ray detection. However, it is still a challenge to explore PHPs with high BPVE temperature ranges, answering the demand of developing thermally stable passive X-ray detection. Herein, by intercalating arylamine into lead tribromide and inducing order-disorder phase transition, a 2D multilayered PHPs (BZA)2(MA)Pb2Br7 (BZPB, BZA = benzylamine, MA = methylamine) is synthesized. BZPB crystallizes in a polar space group Aea2 at a low-temperature phase and demonstrates a significant open-circuit of 0.3 V deriving from BPVE under X-ray irradiation. Meanwhile, the strong X-ray absorption coefficient and outstanding carrier transport capability of the bilayered lead halide framework associated with the polar BPVE give BZPB excellent X-ray detection abilities. At 0 V bias, the impressive sensitivity of BZPB is 98 µC Gy-1 cm-2. Importantly, the introduction of the rigid BZA ring increases the energy barrier of phase transition and thus dramatically enhances the X-ray detection operating temperature of BZPB up to 409 K without significant performance degradation. This work strongly reveals the great potential of rational design of metal halide hybrid perovskites for X-ray detection applications.

Nonlinear Absorption in 2D Ruddlesden-Popper Perovskites: Pathways to Ultrafast Optical Applications

Owing to their distinctive photophysical properties resulting from their larger exciton binding energy and the influence of dielectric and quantum confinement effects, considerable research interest has been directed toward two-dimensional Ruddlesden-Popper halide perovskites (2D RP-HPs). Particularly, 2D RP-HPs exhibit exceptional multiphoton absorption (MPA) effects that reveal versatile applications. In this work, two-photon absorption (2PA) and three-photon absorption (3PA) in 2D RP-HPs, specifically (PEA)2PbBr4 and (BA)2PbBr4 platelets, have been demonstrated through their photoluminescence spectra under multiphoton excitation, revealing a power law relationship with excitation energy. On the other hand, polarization-dependent MPA measurements are also conducted to obtain their anisotropy properties. The excellent 2PA and 3PA effects of 2D RP-HPs have found applications in ultrafast optics to construct fringe-resolved autocorrelation traces, enabling the retrieval of pulse duration not only passively mode-locked Ti:sapphire at 800 nm but also Yb-doped fiber lasers at 1030 nm.

Lattice Dynamics of Quasi-2D Perovskites from First Principles

We present the vibrational properties and phonon dispersion for quasi-2D hybrid organic-inorganic perovskites (BA)2CsPb2I7, (HA)2CsPb2I7, (BA)2(MA)Pb2I7, and (HA)2(MA)Pb2I7 calculated from first principles. Given the highly complex nature of these compounds, we first perform careful benchmarking and convergence testing to identify suitable parameters to describe their structural features and vibrational properties. We find that the inclusion of van der Waals corrections on top of generalized gradient approximation (GGA) exchange-correlation functionals provides the best agreement for the equilibrium structure relative to experimental data. We also investigate the impact of the molecular orientation on the equilibrium structure of these layered perovskite systems. Our results suggest ground state ferroelectric alignment of molecular dipoles in the out-of-plane direction is unlikely and support the assignment of the centrosymmetric space group for the low-temperature phase of (HA)2(MA)Pb2I7. Finally, we compute vibrational properties under the harmonic approximation. We find that stringent energy cut-offs are required to obtain well-converged phonon properties, and once converged, the harmonic approximation can capture key physics for such a large, hybrid inorganic-organic system with vastly different atom types, masses, and interatomic interactions. We discuss the obtained phonon modes and dispersion behavior in the context of known properties for bulk 3D perovskites and ligand molecular crystals. While many vibrational properties are inherited from the parent systems, we also observe unique coupled vibrations that cannot be associated with vibrations of the pure constituent perovskite and ligand subphases. Energy dispersion of the low energy phonon branches primarily occurs in the in-plane direction and within the perovskite subphase and arises from bending and breathing modes of the equatorial Pb-I network within the perovskite octahedral plane. The analysis herein provides the foundation for future investigations on this class of materials, such as exciton-phonon coupling, phase transitions, and general temperature-dependent properties.

A Lead-Free Ferroelectric 2D Dion-Jacobson Tin Iodide Perovskite

2D hybrid organic-inorganic halide perovskites emerge as a new class of 2D semiconductors with the potential to combine excellent optoelectronic properties with symmetry-enabled properties such as ferroelectricity. Although many lead-based ferroelectric 2D halide perovskites are reported, there is yet to be a conclusive report of ferroelectricity in tin-based 2D perovskites. Here, the structures and properties of a new series of 2D Dion-Jacobson (DJ) Sn perovskites: (4AMP)SnI4, (4AMP)(MA)Sn2I7, and (4AMP)(FA)Sn2I7 (4AMP = 4-(aminomethyl)piperidinium, MA = methylammonium, and FA = formamidinium), are reported. Structural characterization reveals that (4AMP)SnI4 is polar with in-plane spontaneous polarization whereas (4AMP)(MA)Sn2I7 and (4AMP)(FA)Sn2I7 are centrosymmetric. Further, (4AMP)SnI4 displays second harmonic generation (SHG) and polarization-electric field hysteresis measurements confirm it is ferroelectric with a spontaneous polarization of 10.0 µC cm-2 at room temperature. (4AMP)SnI4 transitions into a centrosymmetric structure above 367 K. As the first direct experimental observation of the spontaneous ferroelectric polarization of a Sn-based 2D hybrid perovskite, this work opens up environmentally friendly 2D tin halide perovskites for ferroelectricity and other physical property studies.

Bulk Photovoltaic Effect in Polar 3D Perovskitoid Enables Self-Powered Polarization-Sensitive Photodetection

The family of polar hybrid perovskites, in which bulk photovoltaic effects (BPVEs) drive steady photocurrent without bias voltage, have shown promising potentials in self-powered polarization-sensitive photodetection. However, reports of BPVEs in 3D perovskites remain scare, being mainly hindered by the limited dipole moment or lack of symmetry breaking. Herein, a polar 3D perovskitoid, (BDA)Pb2Br6 (BDA = NH3C4H8NH3), where the spontaneous polarization (Ps)-induced BPVE drives self-powered photodetection of polarized-light is reported. Emphatically, the edge-sharing Pb2Br10 dimer building unit allows the optical anisotropy and polarity in 3D (BDA)Pb2Br6, which triggers distinct optical absorption dichroism ratio of ≈2.80 and BPVE dictated photocurrent of 3.5 µA cm-2. Strikingly, these merits contribute to a polarization-sensitive photodetection with a high polarization ratio (≈4) under self-powered mode, beyond those of 2D hybrid perovskites and inorganic materials. This study highlights the potential of polar 3D perovskitoids toward intelligent optoelectronic applications.

Piezoelectric Charge Coefficient of Halide Perovskites

Halide perovskites are an emerging family of piezoelectric and ferroelectric materials. These materials can exist in bulk, single-crystal, and thin-film forms. In this article, we review the piezoelectric charge coefficient (dij) of single crystals, thin films, and dimension-tuned halide perovskites based on different measurement methods. Our study finds that the (dij) coefficient of the bulk and single-crystal samples is mainly measured using the quasi-static (Berlincourt) method, though the piezoforce microscopy (PFM) method is also heavily used. In the case of thin-film samples, the (dij) coefficient is dominantly measured by the PFM technique. The reported values of dij coefficients of halide perovskites are comparable and even better in some cases compared to existing materials such as PZT and PVDF. Finally, we discuss the promising emergence of quasi-static methods for thin-film samples as well.

Direction Dependent Ferroelectricity and Conductivity in a Single Crystal 2D Halide Double Perovskite

Halide ferroelectric materials have garnered a lot of interest because of their distinctive electrical and structural characteristics. In this study, the design and development of a new non-centrosymmetric 2D layered halide double perovskite material, Cl1.14Br2.86PA4AgInBr8 (CPAIn) is reported. This material shows ferroelectric properties above room temperature, with a Curie temperature of 190 °C. This behavior is achieved through the substitution of the halogenated A-site organic linker, 3-chloropropylammonium. CPAIn exhibits anisotropic ferroelectric behavior with higher spontaneous polarization of 6.25 µC cm-2 along the perpendicular direction to the octahedral layers, whereas the value decreases to 0.174 µC cm-2 between sheets. While using bottom contact to study the nature of polarity within a sheet, the P-E loop displays capacitive loop. The nature and value of polarization is highly direction dependent, and to further understand the mechanism of conduction, a combination of temperature-dependent impedance studies and poling dependent conductivity techniques are employed. These directional dependent properties hold immense potential in memory devices, sensors and photovoltaics, piezoelectric devices and energy storage.

Realization of High-Performance Self-Powered Polarized Photodetection with Large Temperature Window in a 2D Polar Perovskite

Polarization photodetection taking advantage of the anisotropy of 2D materials shines brilliantly in optoelectronic fields owing to differentiating optical information. However, the previously reported polarization detections are mostly dependent on external power sources, which is not conducive to device integration and energy conservation. Herein, a 2D polar perovskite (CBA)2CsPb2Br7 (CCPB, CBA = 4-chlorobenzyllamine) has been successfully synthesized, which shows anticipated bulk photovoltaic effect (BPVE) with an open-circuited photovoltage up to ≈0.2 V. Devices based on CCPB monomorph fulfill a fascinating self-powered polarized photodetection with a large polarization ratio of 2.7 at room temperature. Moreover, CCPB features a high phase-transition temperature (≈475 K) which prompts such self-powered polarized photodetection in a large temperature window of device operation, since BPVE generated by spontaneous polarization can only exist in the polar structure prior to the phase transition. Further computational investigation reveals the introduction of CBA+ with a large dipole moment contributes to quite large polarization (17.5 µC cm-2) and further super high phase transition temperature of CCPB. This study will promote the application of 2D perovskite materials for self-powered polarized photodetection in high-temperature conditions.

Ferroelectricity and Thermochromism in a 2D Dion-Jacobson Organic-Inorganic Hybrid Perovskite

2D organic-inorganic hybrid perovskites (OIHPs) have become one of the hottest research topics due to their excellent environmental stability and unique optoelectronic properties. Recently, the ferroelectricity and thermochromism of 2D OIHPs have attracted increasing interests. Integrating ferroelectricity and thermochromism into perovskites can significantly promote the development of multichannel intelligent devices. Here, a novel 2D Dion-Jacobson OIHP of the formula (3AMP)PbI4 (where 3AMP is 3-(aminomethyl)pyridinium) is reported, which has a remarkable spontaneous polarization value (Ps) of 15.6 µC cm-2 and interesting thermochromism. As far it is known, such a large Ps value is the highest for 2D OIHPs recorded so far. These findings will inspire further exploration and application of multifunctional perovskites.

Progress in Advanced Infrared Optoelectronic Sensors

Infrared optoelectronic sensors have attracted considerable research interest over the past few decades due to their wide-ranging applications in military, healthcare, environmental monitoring, industrial inspection, and human-computer interaction systems. A comprehensive understanding of infrared optoelectronic sensors is of great importance for achieving their future optimization. This paper comprehensively reviews the recent advancements in infrared optoelectronic sensors. Firstly, their working mechanisms are elucidated. Then, the key metrics for evaluating an infrared optoelectronic sensor are introduced. Subsequently, an overview of promising materials and nanostructures for high-performance infrared optoelectronic sensors, along with the performances of state-of-the-art devices, is presented. Finally, the challenges facing infrared optoelectronic sensors are posed, and some perspectives for the optimization of infrared optoelectronic sensors are discussed, thereby paving the way for the development of future infrared optoelectronic sensors.

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Crystal Structure and Optical Properties Characterization in Quasi-0D Lead-Free Bromide Crystals (C6H14N)3Bi2Br9·H2O and (C6H14N)3Sb3Br12

Low dimensional organic inorganic metal halide materials have shown broadband emission and large Stokes shift, making them widely used in various fields and a promising candidate material. Here, the zero-dimensional lead-free bromide single crystals (C6H14N)3Bi2Br9·H2O (1) and (C6H14N)3Sb3Br12 (2) were synthesized. They crystallized in the monoclinic crystal system with the space group of P21 and P21/n, respectively. Through ultraviolet-visible-near-infrared (UV-vis-NIR) absorption analysis, the band gaps of (C6H14N)3Bi2Br9·H2O and (C6H14N)3Sb3Br12 are found to be 2.75 and 2.83 eV, respectively. Upon photoexcitation, (C6H14N)3Bi2Br9·H2O exhibit broad-band red emission peaking at 640 nm with a large Stokes shift of 180 nm and a lifetime of 2.94 ns, and the emission spectrum of (C6H14N)3Sb3Br12 are similar to those of (C6H14N)3Bi2Br9·H2O. This exclusive red emission is ascribed to the self-trapping exciton transition caused by lattice distortion, which is confirmed through both experiments and first-principles calculations. In addition, due to the polar space group structure and the large spin-orbit coupling (SOC) associated with the heavy elements of Bi and Br of crystal 1, an obvious Rashba effect was observed. The discovery of organic inorganic metal bromide material provides a critical foundation for uncovering the connection between 0D metal halide materials' structures and properties.

Large Enhancement of Polarization in a Layered Hybrid Perovskite Ferroelectric Semiconductor via Molecular Engineering

Switchable spontaneous polarization is the vital property of ferroelectrics, which leads to other key physical properties such as piezoelectricity, pyroelectricity, and nonlinear optical effects, etc. Recently, organic-inorganic hybrid perovskites with 2D layered structure have become an emerging branch of ferroelectric materials. However, most of the 2D hybrid ferroelectrics own relatively low polarizations (<15 µC cm-2 ). Here, a strategy to enhance the polarization of these hybrid perovskites by using ortho-, meta-, para-halogen substitution is developed. Based on (benzylammonium)2 PbCl4 (BZACL), the para-chlorine substituted (4-chlorobenzylammonium)2 PbCl4 (4-CBZACL) ferroelectric semiconductor shows a large spontaneous polarization (23.3 µC cm-2 ), which is 79% larger than the polarization of BZACL. This large enhancement of polarization is successfully explained via ab initio calculations. The study provides a convenient and efficient strategy to promote the ferroelectric property in the hybrid perovskite family.

Low-Dimensional-Materials-Based Photodetectors for Next-Generation Polarized Detection and Imaging

The vector characteristics of light and the vectorial transformations during its transmission lay a foundation for polarized photodetection of objects, which broadens the applications of related detectors in complex environments. With the breakthrough of low-dimensional materials (LDMs) in optics and electronics over the past few years, the combination of these novel LDMs and traditional working modes is expected to bring new development opportunities in this field. Here, the state-of-the-art progress of LDMs, as polarization-sensitive components in polarized photodetection and even the imaging, is the main focus, with emphasis on the relationship between traditional working principle of polarized photodetectors (PPs) and photoresponse mechanisms of LDMs. Particularly, from the view of constitutive equations, the existing works are reorganized, reclassified, and reviewed. Perspectives on the opportunities and challenges are also discussed. It is hoped that this work can provide a more general overview in the use of LDMs in this field, sorting out the way of related devices for "more than Moore" or even the "beyond Moore" research.

Ferroelectric-Optoelectronic Hybrid System for Photodetection

Photodetectors (PDs), as functional devices based on photon-to-electron conversion, are an indispensable component for the next-generation Internet of Things system. The research of advanced and efficient PDs that meet the diverse demands is becoming a major task. Ferroelectric materials can develop a unique spontaneous polarization due to the symmetry-breaking of the unit cell, which is switchable under an external electric field. Ferroelectric polarization field has the intrinsic characteristics of non-volatilization and rewritability. Introducing ferroelectrics to effectively manipulate the band bending and carrier transport can be non-destructive and controllable in the ferroelectric-optoelectronic hybrid systems. Hence, ferroelectric integration offers a promising strategy for high-performance photoelectric detection. This paper reviews the fundamentals of optoelectronic and ferroelectric materials, and their interactions in hybrid photodetection systems. The first section introduces the characteristics and applications of typical optoelectronic and ferroelectric materials. Then, the interplay mechanisms, modulation effects, and typical device structures of ferroelectric-optoelectronic hybrid systems are discussed. Finally, in summary and perspective section, the progress of ferroelectrics integrated PDs is summed up and the challenges of ferroelectrics in the field of optoelectronics are considered.

Nonlinear Optical Switching in a Tin-Based Multilayered Halide Perovskite Activated by Stereoactive Lone Pairs and Confined Rotators

In recent years, there has been a surge in research enthusiasm on searching for solid-state nonlinear optical (NLO) switching materials in halide perovskites owing to their exceptional structural flexibility, compositional diversity, and broad property tenability. However, the majority of reported halide perovskite NLO switching materials contain toxic elements (e.g., Pb), which raise significant environmental concerns. Herein, we present a novel lead-free multilayered halide perovskite NLO switching material, (BA)2(EA)2Sn3Br10 (1, where BA is butylammonium and EA is ethylammonium). Driven by the stereochemically active lone-pair electrons of the Sn2+ cation and the cage-confined effect of EA rotators, 1 undergoes a phase transition with symmetry breaking from P4/mnc to Cmc21, which gives rise to a highly efficient modulation of the quadratic NLO property (0.7 times that of KH2PO4) at a high temperature of 353 K. Furthermore, crystallographic investigation combined with theoretical calculations reveals that the efficient modulation of NLO properties in 1 stems from the synergistic effects between stereochemically active lone pair-induced octahedral distortions and order/disorder transformation of organic cations. This study opens up an instructive avenue for designing and advancing environmentally friendly solid-state NLO switches in halide perovskites.

Alkali Metal Organic-Inorganic Hybrid Compounds with Different Crystal Dimensions Show Phase-Transition, Dielectric, and SHG Properties Based on a Quasi-Spherical Amine (1S,4S)-2,5-Diazabicyclo[2.2.1]heptane

Reactions of a chiral and quasi-spherical molecule [1S,4S-2,5-2.2.1-H2dabch]I2 (1) with alkali metal halide MX (M = Na, K, Cs; X = Cl, Br) at room temperature produced a series of organic-inorganic hybrid (OIH) materials [1S,4S-2,5-2.2.1-H2dabch]NaBr3 (2), [1S,4S-2,5-2.2.1-H2dabch]CsCl3·H2O (3) and [1S,4S-2,5-2.2.1-H2dabch]KBr3·H2O (4). The single-crystal X-ray diffraction analysis revealed that the organic-inorganic framework structures comprised of the templating ligand and alkali metal halides (NaBr, CsCl, KBr) displayed dimensions spanning from one-dimensional (1D) to three-dimensional (3D). Moreover, the results of both differential scanning calorimetry (DSC) and dielectric measurements demonstrated that compounds 1-4 displayed reversible, high-temperature phase transitions and noticeable dielectric anomalies. In addition, the temperature-dependent second harmonic generation (SHG) results revealed crystals 1 and 3 can switch from the SHG-ON to the SHG-OFF state, which was proved by the variable-temperature X-ray diffraction. This research aims to streamline the exploration of multifunctional second harmonic generation (SHG) and dielectric materials that have been synthesized using chiral ligands and alkali metals. This will provide researchers with enhanced opportunities to delve further into this specific research domain.

Identification and Mitigation of Transient Phenomena That Complicate the Characterization of Halide Perovskite Photodetectors

Halide perovskites have shown promise to advance the field of light detection in next-generation photodetectors, offering performance and functionality beyond what is currently possible with traditional inorganic semiconductors. Despite a relatively high density of defects in perovskite thin films, long carrier diffusion lengths and lifetimes suggest that many defects are benign. However, perovskite photodetectors show detection behavior that varies with time, creating inconsistent device performance and difficulties in accurate characterization. Here, we link the changing behavior to mobile defects that migrate through perovskites, leading to detector currents that drift on the time scale of seconds. These effects not only complicate reproducible device performance but also introduce characterization challenges. We demonstrate that such transient phenomena generate measurement artifacts that mean the value of specific detectivity measured can vary by up to 2 orders of magnitude even in the same device. The presence of defects can lead to photoconductive gain in photodetectors, and we show batch-to-batch processing variations in perovskite devices gives varying degrees of charge carrier injection and photocurrent amplification under low light intensities. We utilize the passivating effect of aging to reduce the impact of defects, minimizing current drifts and eliminating the gain. This work highlights the potential issues arising from mobile defects, which lead to inconsistent photodetector operation, and identifies the potential for defects to tune photodetection behavior in perovskite photodetectors.

Bulk Photovoltaic Effect Along the Nonpolar Axis in Organic-Inorganic Hybrid Perovskites

The origin of the bulk photovoltaic effect (BPVE) was considered as a built-in electric field formed by the macroscopic polarization of materials. Alternatively, the "shift current mechanism" has been gradually accepted as the more appropriate description of the BPVE. This mechanism implies that the photocurrent generated by the BPVE is a topological current featuring an ultrafast response and dissipation-less nature, which is very attractive for photodetector applications. Meanwhile, the origin of the BPVE in organic-inorganic hybrid perovskites (OIHPs) has not been discussed and is still widely accepted as the classical mechanism without any experimental evidence. Herein, we observed the BPVE along the nonpolar axis in OIHPs, which is inconsistent with the classical explanation. Furthermore, based on the nonlinear optical tensor correlation, we substantiated that the BPVE in OIHPs is originated in the shift current mechanism.

A molecular pyroelectric enabling broadband photo-pyroelectric effect towards self-driven wide spectral photodetection

Broadband spectral photoresponse has shown bright prospects for various optoelectronic devices, while fulfilling high photoactivity beyond the material bandgap is a great challenge. Here, we present a molecular pyroelectric, N-isopropylbenzylaminium trifluoroacetate (N-IBATFA), of which the broadband photo-pyroelectric effects allow for self-driven wide spectral photodetection. As a simple organic binary salt, N-IBATFA possesses a large polarization (~9.5 μC cm-2), high pyroelectric coefficient (~6.9 μC cm-2 K-1) and figures-of-merits (FV = 187.9 × 10-2 cm2 μC-1; FD = 881.5 × 10-5 Pa-0.5) comparable to the state-of-art pyroelectric materials. Particularly, such intriguing attributes endow broadband photo-pyroelectric effect, namely, transient currents covering ultraviolet (UV, 266 nm) to near-infrared (NIR, 1950 nm) spectral regime, which breaks the restriction of its optical absorption and thus allows wide UV-NIR spectral photodetection. Our finding highlights the potential of molecular system as high-performance candidates toward self-powered wide spectral photodetection.

2D Ruddlesden-Popper Polycrystalline PerovskitePyro-Phototronic Photodetectors

Two-dimensional (2D) Ruddlesden-Popper (RP) layered halide perovskite has attracted wide attentions due to its unique structure and excellent optoelectronic properties. With inserting organic cations, inorganic octahedrons are forced to extend in a certain direction, resulting in an asymmetric 2D perovskite crystal structure and causing spontaneous polarization. The pyroelectric effect resulted from spontaneous polarization exhibits a broad prospect in the application of optoelectronic devices. Herein, 2D RP polycrystalline perovskite (BA)2 (MA)3 Pb4 I13 film with excellent crystal orientation is fabricated by hot-casting deposition, and a class of 2D hybrid perovskite photodetectors (PDs) with pyro-phototronic effect is proposed, achieving temperature and light detection with greatly improved performance by coupling multiple energies. Because of the pyro-phototronic effect, the current is ≈35 times to that of the photovoltaic effect current under 0 V bias. The responsivity and detectivity are 12.7 mA W-1 and 1.73 × 1011 Jones, and the on/off ratio can reach 3.97 × 103 . Furthermore, the influences of bias voltage, light power density, and frequency on the pyro-phototronic effect of 2D RP polycrystalline perovskite PDs are explored. The coupling of spontaneous polarization and light facilitates photo-induced carrier dissociation and tunes the carrier transport process, making 2D RP perovskites a competitive candidate for next-generation photonic devices.

Discovery of enhanced lattice dynamics in a single-layered hybrid perovskite

Layered hybrid perovskites exhibit emergent physical properties and exceptional functional performances, but the coexistence of lattice order and structural disorder severely hinders our understanding of these materials. One unsolved problem regards how the lattice dynamics are affected by the dimensional engineering of the inorganic frameworks and their interaction with the molecular moieties. Here, we address this question by using a combination of spontaneous Raman scattering, terahertz spectroscopy, and molecular dynamics simulations. This approach reveals the structural dynamics in and out of equilibrium and provides unexpected observables that differentiate single- and double-layered perovskites. While no distinct vibrational coherence is observed in double-layered perovskites, an off-resonant terahertz pulse can drive a long-lived coherent phonon mode in the single-layered system. This difference highlights the dramatic change in the lattice environment as the dimension is reduced, and the findings pave the way for ultrafast structural engineering and high-speed optical modulators based on layered perovskites.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Low Detection Limit Circularly Polarized Light Detection Realized by Constructing Chiral Perovskite/Si Heterostructures

Chiral perovskites have been demonstrated as promising candidates for direct circularly polarized light (CPL) detection due to their intrinsic chirality and excellent charge transport ability. However, chiral perovskite-based CPL detectors with both high distinguishability of left- and right-handed optical signals and low detection limit remain unexplored. Here, a heterostructure, (R-MPA)2 MAPb2 I7 /Si (MPA = methylphenethylamine, MA = methylammonium) is constructed, to achieve high-sensitive and low-limit CPL detection. The heterostructures with high crystalline quality and sharp interface exhibit a strong built-in electric field and a suppressed dark current, not only improving the separation and transport of the photogenerated carriers but also laying a foundation for weak CPL signals detection. Consequently, the heterostructure-based CPL detector obtains a high anisotropy factor up to 0.34 with a remarkably low CPL detection limit of 890 nW cm-2 under the self-driven mode. As a pioneering study, this work paves the way for designing high-sensitive CPL detectors that simultaneously have great distinguishing capability and low detection limit of CPL.

Multifunctional Perovskite Photodetectors: From Molecular-Scale Crystal Structure Design to Micro/Nano-scale Morphology Manipulation

Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implementation of multifunctional detectors is based on the physical combination of optical lenses, gratings, and multiple photodetectors, the large size and its complex structure hinder the miniaturization, lightweight, and integration of devices. In contrast, perovskite materials have achieved remarkable progress in the field of multifunctional photodetectors due to their diverse crystal structures, simple morphology manipulation, and excellent optoelectronic properties. In this review, we first overview the crystal structures and morphology manipulation techniques of perovskite materials and then summarize the working mechanism and performance parameters of multifunctional photodetectors. Furthermore, the fabrication strategies of multifunctional perovskite photodetectors and their advancements are highlighted, including polarized light detection, spectral detection, angle-sensing detection, and self-powered detection. Finally, the existing problems of multifunctional detectors and the perspectives of their future development are presented.

Giant Polarization Sensitivity via the Anomalous Photovoltaic Effect in a Two-Dimensional Perovskite Ferroelectric

Polarization sensitivity, which shows great potential in photoelectric detection, is expected to be significantly improved by the ferroelectric anomalous photovoltaic (APV) effect. However, it is challenging to explore new APV-active ferroelectrics due to severe polarization fatigue induced by the leakage current of photoexcited carriers. For the first time, we report a strong APV effect in a 2D hybrid perovskite ferroelectric assembled by alloying mixed organic cations, (HA)₂(EA)₂Pb₃Br₁₀ (1, where HA⁺ is n-hexylammonium and EA⁺ is ethylammonium), which has a large spontaneous polarization ∼3.8 μC/cm² and high a Curie temperature ∼378 K. Its ferroelectricity allows a strong APV effect with an above-bandgap photovoltage up to 7.4 V, which exceeds its bandgap (∼2.7 eV). Most strikingly, based on the dependence on polarized-light angle, this strong APV effect renders the highest level of polarization sensitivity with a giant current ratio of ∼25, far beyond other 2D single-phase materials. This study sheds light on the exploration of APV-active ferroelectrics and inspires their future high-performance optoelectronic device applications.

Chemical Behavior and Local Structure of the Ruddlesden-Popper and Dion-Jacobson Alloyed Pb/Sn Bromide 2D Perovskites

The alloyed lead/tin (Pb/Sn) halide perovskites have gained significant attention in the development of tandem solar cells and other optoelectronic devices due to their widely tunable absorption edge. To gain a better understanding of the intriguing properties of Pb/Sn perovskites, such as their anomalous bandgap's dependence on stoichiometry, it is important to deepen the understanding of their chemical behavior and local structure. Herein, we investigate a series of two-dimensional Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phase alloyed Pb/Sn bromide perovskites using butylammonium (BA) and 3-(aminomethyl)pyridinium (3AMPY) as the spacer cations: (BA)₂(MA)_n-1Pb_xSn_n-xBr_3n+1 (n = 1-3) and (3AMPY)(MA)_n-1Pb_xSn_n-xBr_3n+1 (n = 1-3) through a solution-based approach. Our results show that the ratio and site preference of Pb/Sn atoms are influenced by the layer thickness (n) and spacer cations (A'), as determined by single-crystal X-ray diffraction. Solid-state ¹H, ¹¹⁹Sn, and ²⁰⁷Pb NMR spectroscopy analysis shows that the Pb atoms prefer the outer layers in n = 3 members: (BA)₂(MA)Pb_xSn_n-xBr₁₀ and (3AMPY)(MA)Pb_xSn_n-xBr₁₀. Layered 2D DJ alloyed Pb/Sn bromide perovskites (3AMPY)(MA)_n-1Pb_xSn_n-xBr_3n+1 (n = 1-3) demonstrate much narrower optical band gaps, lower energy PL emission peaks, and longer carrier lifetimes compared to those of RP analogs. Density functional theory calculations suggest that Pb-rich alloys (Pb:Sn ∼4:1) for n = 1 compounds are thermodynamically favored over 50:50 (Pb:Sn ∼1:1) compositions. From grazing-incidence wide-angle X-ray scattering (GIWAXS), we see that films in the RP phase orient parallel to the substrate, whereas for DJ cases, random orientations are observed relative to the substrate.

Photo- and Thermal-Induced Ion Migration and Phase Separation in Mn-Doped Two-Dimensional PEA2PbX4 Perovskite

Ion migration and phase separation in perovskite materials have negatively affected the solid-state lighting and display. Studying photo- and thermal-induced degradation is considered as a promising approach to understanding the luminescence mechanism and promoting practical applications. Herein, the Mn-doped two-dimensional PEA₂PbX₄ (X = Cl, Br, I) microcrystals with changing halogen composition were synthesized by an acid-assisted post-processing strategy. Then, photo- and thermal-induced degradation was studied by using steady-state and time-resolved photoluminescence (PL) spectroscopy. The band edge exciton PL peak of Mn-doped 2D PEA₂PbX₄ microcrystals was adjusted from 397 to 500 nm. The reduced Mn PL lifetime (1.37 to 0.21 ms) was monitored under ion exchange from Cl to Br to I. The degradation mechanism could be divided into two cases: (i) The halide ion migration in Mn-doped 2D perovskite under continuous illumination was revealed, suggesting that the migration of Cl ions was more accessible than that of Br and I. (ii) The PL redshift and lifetime reduction were observed after annealing at 420 K, which means that thermally induced aggregation of Mn ions resulted in the formation of Mn²⁺-Mn²⁺ dimers. In addition, the experimental results indicated that the induced B-site phase separation at high temperature annealing made the mixed perovskite phase of Pb and Mn ultimately transform into pure PEA₂PbBr₄ and PEA₂MnBr₄.

Near-90° Switch in the Polar Axis of Dion-Jacobson Perovskites by Halide Substitution

Ferroelectricity in two-dimensional hybrid (2D) organic-inorganic perovskites (HOIPs) can be engineered by tuning the chemical composition of the organic or inorganic components to lower the structural symmetry and order-disorder phase change. Less efforts are made toward understanding how the direction of the polar axis is affected by the chemical structure, which directly impacts the anisotropic charge order and nonlinear optical response. To date, the reported ferroelectric 2D Dion-Jacobson (DJ) [PbI₄]^2- perovskites exhibit exclusively out-of-plane polarization. Here, we discover that the polar axis in ferroelectric 2D Dion-Jacobson (DJ) perovskites can be tuned from the out-of-plane (OOP) to the in-plane (IP) direction by substituting the iodide with bromide in the lead halide layer. The spatial symmetry of the nonlinear optical response in bromide and iodide DJ perovskites was probed by polarized second harmonic generation (SHG). Density functional theory calculations revealed that the switching of the polar axis, synonymous with the change in the orientation of the sum of the dipole moments (DMs) of organic cations, is caused by the conformation change of organic cations induced by halide substitution.

Emerging Halide Perovskite Ferroelectrics

Halide perovskites have gained tremendous attention in the past decade owing to their excellent properties in optoelectronics. Recently, a fascinating property, ferroelectricity, has been discovered in halide perovskites and quickly attracted widespread interest. Compared with traditional perovskite oxide ferroelectrics, halide perovskites display natural advantages such as structural softness, low weight, and easy processing, which are highly desirable in applications pursuing miniaturization and flexibility. This review focuses on the current research progress in halide perovskite ferroelectrics, encompassing the emerging materials systems and their potential applications in ferroelectric photovoltaics, self-powered photodetection, and X-ray detection. The main challenges and possible solutions in the future development of halide perovskite ferroelectric materials are also attempted to be pointed out.

Ferroelectricity in Hybrid Perovskites

Ferroelectric ceramics such as PbZr_xTi_1-xO₃ (PZT) are widely applied in many fields, from medical to aerospace, because of their dielectric, piezoelectric, and pyroelectric properties. In the past few years, hybrid organic-inorganic halide perovskites have gradually attracted attention for their optical and electronic properties, including ferroelectricity, and for their low fabrication costs. In this Review, we first describe techniques that are used to quantify ferroelectric figures of merit of a material. We then discuss ferroelectricity in hybrid perovskites, starting from controversies in methylammonium iodoplumbate perovskites and then focusing on low-dimensional perovskites that offer an unambiguous platform to obtain ferroelectricity. Finally, we provide examples of the application of perovskite ferroelectrics in solar cells, LEDs, and X-ray detectors. We conclude that the vast structure-property tunability makes low-dimensional hybrid perovskites promising, but they have yet to offer ferroelectric figures of merit (e.g., saturated polarization) and thermal stability (e.g., Curie temperature) competitive with those of conventional oxide perovskite ferroelectric materials.

Ferroelectrically Modulated and Enhanced Photoresponse in a Self-Powered α-In2Se3/Si Heterojunction Photodetector

Photodetectors have been applied to pivotal optoelectronic components of modern optical communication, sensing, and imaging systems. As a room-temperature ferroelectric van der Waals semiconductor, 2D α-In₂Se₃ is a promising candidate for a next-generation optoelectronic material because of its thickness-dependent direct bandgap and excellent optoelectronic performance. Previous studies of photodetectors based on α-In₂Se₃ have been rarely focused on the modulated relationship between the α-In₂Se₃ intrinsic ferroelectricity and photoresponsivity. Herein, a simple integrated process and high-performance photodetector based on an α-In₂Se₃/Si vertical hybrid-dimensional heterojunction was constructed. Our photodetector in the ferroelectric polarization up state accomplishes a self-powered, highly sensitive photoresponse with an on/off ratio of 4.5 × 10⁵ and detectivity of 1.6 × 10¹³ Jones, and it also shows a fast response time with 43 μs. The depolarization field generated by the remanent polarization of ferroelectrics in α-In₂Se₃ provides a strategy for enhancement and modulation of photodetection. The negative correlation was discovered because the enhancement photoresponsivity factor of ferroelectric modulation competes with the photovoltaic behavior within the α-In₂Se₃/Si heterojunction. Our research highlights the great potential of the high-efficiency heterojunction photodetector for future object recognition and photoelectric imaging.

Near-infrared polarization-sensitive photodetection via interfacial symmetry engineering of an Si/MAPbI3 heterostructural single crystal

Methylammonium lead iodide (MAPbI₃) single crystals (SCs) have drawn particular attention in the optoelectronics field, due to their outstanding photoelectric performance. However, the structures of those MAPbI₃ SCs are isotropic, which limits the further application of the materials for polarization-sensitive photodetection. Here, we propose a strategy of symmetry modulation by heterogeneously integrating large-sized MAPbI₃ SCs with silicon (Si) wafers and we give the first demonstration of self-powered near-infrared (NIR) polarization-sensitive photodetection using MAPbI₃ SCs. Created via a delicate solution method, the MAPbI₃/Si heterostructures show a high crystalline quality and a solid interfacial connection. More importantly, the built-in electric field resulting from the band bending at the MAPbI₃/Si heterostructure interface generates polar symmetry, which enables directional transport of photogenerated carriers, making the MAPbI₃/Si heterostructures highly polarization-sensitive. Consequently, in the self-powered mode, NIR photodetectors of MAPbI₃/Si heterostructures exhibit large polarization ratios of 3.3 at 785 nm and 2.8 at 940 nm. Moreover, a high detectivity of 7.35 × 10¹² Jones of the present devices is also achieved. Our work gives the first demonstration of self-powered polarization-sensitive photodetection of MAPbI₃ SCs and provides a strategy to design polarization-sensitive materials beyond the conventional limitations induced by isotropic structures.

Three-Dimensional Perovskite Phase Transition Materials with Switchable Second Harmonic Generation Properties Introduced by Homochiral (1S,4S)-2,5-Diazabicyclo[2.2.1]-heptane

Switchable second harmonic generation (SHG) materials have potential applications in information storage, signal processing, and so on because they can switch between SHG-on and SHG-off states. In this work, we designed and synthesized three organic-inorganic hybrid Rb halide three-dimensional (3D) perovskite materials [1S,4S 2,5-2.2.1-H₂dabch]RbX₃·0.5H₂O (X = Cl, 1; Br, 2; I, 3) based on the chiral 1S,4S-2,5-diazabicyclo[2.2.1]heptane (1S,4S-2,5-2.2.1-dabch). The selection of homochiral organic cations ensures that the compounds 1∼3 crystallize in the noncentrosymmetric and chiral space group P2₁2₁2₁, which further leads to reversible SHG responses of the three compounds. Through differential scanning calorimetry (DSC) and dielectric measurements, it revealed that the phase transition point of the compounds 1∼3 increased with RbCl, RbBr, and RbI. This is because the hydrogen interaction H···X between the inorganic framework [RbX₃]_n and the organic cation [1S,4S-2,5-2.2.1-H₂dabch]²⁺ is increased with the order of I > Br > Cl. This study can provide an effective molecular design strategy for the exploration and construction of temperature-tunable SHG switching materials.

Broadband Photoresponses from Ultraviolet to Near-Infrared (II) Region through Light-induced Pyroelectric Effects in a Hybrid Perovskite

Broadband photodetection has shown a great promise for diverse applications, while the realization of plateau photoresponse from ultraviolet (UV) to near-infrared (NIR) spectral region is very challenging. Herein, we exploit photoexcited pyroelectric effect in a chiral hybrid perovskite, (N, N-dimethylcyclohexylammonium)PbBr₃ (1), serving as a new pathway to drive broadband photoactivities. It is a room-temperature pyroelectric with large polarization of ≈6.4 μC cm^-2 and high pyroelectric figure-of-merits (F_V =1.0×10^-2  cm²   μC^-1 and F_D =7.1×10^-5  Pa^-1/2 ). Strikingly, light-induced pyroelectric effect arising from spontaneous polarization is observed in 1, which cover UV (266 nm) to NIR-II (1950 nm) full spectral region. The broadband photoresponses actualized by pyroelectricity break the limit of optical band gap. As the first demonstration of photo-pyroelectricity covering UV-to-NIR spectral region in hybrid perovskites, this work paves a pathway to assemble high-performance smart devices.

Circular polarized light-dependent anomalous photovoltaic effect from achiral hybrid perovskites

Circular polarized light-dependent anomalous bulk photovoltaic effect - a steady anomalous photovoltaic current can be manipulated by changing the light helicity, is an increasingly interesting topic in contexts ranging from physics to chemistry. Herein, circular polarized light-dependent anomalous bulk photovoltaic effect is presented in achiral hybrid perovskites, (4-AMP)BiI5 (ABI, 4-AMP is 4-(aminomethyl)piperidinium), breaking conventional realization that it can only happen in chiral species. Achiral hybrid perovskite ABI crystallizes in chiroptical-active asymmetric point group m (Cs), showing an anomalous bulk photovoltaic effect with giant photovoltage of 25 V, as well as strong circular polarized light - sensitive properties. Significantly, conspicuous circular polarized light-dependent anomalous bulk photovoltaic effect is reflected in the large degree of dependence of anomalous bulk photovoltaic effect on left-and right-CPL helicity, which is associated with left and right-handed screw optical axes of ABI. Such degree of dependence is demonstrated by a large asymmetry factor of 0.24, which almost falls around the highest value of hybrid perovskites. These unprecedented results may provide a perspective to develop opto-spintronic functionalities in hybrid perovskites.

Chiral Rashba Ferroelectrics for Circularly Polarized Light Detection

Direct detection of circularly polarized light (CPL) is a challenging task due to limited materials and ambiguous structure-property relationships that lead to low distinguishability of the light helicities. Perovskite ferroelectric semiconductors incorporating chirality provide new opportunities in dealing with this issue. Herein, a pair of 2D chiral perovskite ferroelectrics is reported, which have enhanced CPL detection performance due to interplays among lattice, photon, charge, spin, and orbit. The chirality-transfer-induced chiral&polar ferroelectric phase enhances the asymmetric nature of the photoactive sublattice and achieves a switchable self-powered detection via the bulk photovoltaic effect. The single-crystal-based device exhibits a CPL-sensitive detection performance under 430 nm with an asymmetric factor of 0.20 for left- and right-CPL differentiation, about two times that of the pure chiral counterparts. The enhanced CPL detection performance is ascribed to the Rashba-Dresselhaus effect that originates from the bulk inversion asymmetry and strong spin-orbit coupling, shown with a large Rashba coefficient, which is demonstrated by density functional theory calculation and circularly polarized light excited photoluminescence measurement. These results provide new perspectives on chiral Rashba ferroelectric semiconductors for direct CPL detection and ferroelectrics-based chiroptics and spintronics.

Patterned 2D Ferroelectric Perovskite Single-Crystal Arrays for Self-Powered UV Photodetector Boosted by Combining Ferro-Pyro-Phototronic and Piezo-Phototronic Effects

Metal halide perovskite ferroelectrics possess various physical characteristics such as piezoelectric and pyroelectric effects, which could broaden the application of perovskite ferroelectrics and enhance the optoelectronic performance. Therefore, it is promising to combine multiple effects to optimize the performance of the self-powered PDs. Herein, patterned 2D ferroelectric perovskite (PMA)₂PbCl₄ microbelt arrays were demonstrated through a PDMS template-assisted antisolvent crystallization method. The perovskite arrays based flexible photodetectors exhibited fine self-powered photodetection performance under 320 nm illumination and much enhanced reproducibility compared with the randomly distributed single-crystal microbelts-based PDs. Furthermore, by introducing the piezo-phototronic effect, the performance of the flexible PD was greatly enhanced. Under an external tensile strain of 0.71%, the responsivity was enhanced by 185% from 84 to 155.5 mA/W. Our findings offer the advancement of comprehensively utilizing various physical characteristics of the ferroelectrics for novel ferroelectric optoelectronics.

Hydrogen Bond-Driven Order-Disorder Phase Transition in the Near-Room-Temperature Nonlinear Optical Switch [Ag(NH3)2]2SO4

Herein, we report a near-room-temperature nonlinear optical (NLO) switch material, [Ag(NH₃)₂]₂SO₄, exhibiting switching performance with strong room-temperature second harmonic generation (SHG) intensity that outperforms the UV-vis spectral region industry standard KH₂PO₄ (1.4 times stronger). [Ag(NH₃)₂]₂SO₄ undergoes a reversible phase transition (T _c = 356 K) from the noncentrosymmetric room-temperature phase (P4̅2₁ c, RTP) to a centrosymmetric high-temperature phase (I4/mmm, HTP) where both the SO₄ ^2- anions and [Ag(NH₃)₂]⁺ cations are highly disordered. The weakening of hydrogen bond interactions in the HTP is also evidenced by the lower energy shift of the stretching vibration of the N-H···O bonds revealed by the in situ FT-IR spectra. Such weakening leads to an unusual negative thermal expansion along the c axis (-3%). In addition, both the atomic displacement parameters of the single-crystal diffraction data and the molecular dynamics-simulated mean squared displacements suggest the motions of the O and N atoms. Such a structural disorder not only hinders the phonon propagation and dramatically drops the thermal conductivity to 0.22 W m^-1 K^-1 at 361 K but also significantly weakens the optical anisotropy and SHG as verified by the DFT theoretical studies.

Self-Assembly of 2D Hybrid Double Perovskites on 3D Cs2 AgBiBr6 Crystals towards Ultrasensitive Detection of Weak Polarized Light

We report the self-assembly of 2D double perovskite (BLA)₂ CsAgBiBr₇ (BLA=benzylammonium) on 3D Cs₂ AgBiBr₆ crystals, providing the first demonstration of polarization-sensitive photodetection using lead-free double perovskite heterocrystals (HCs). The (BLA)₂ CsAgBiBr₇ /Cs₂ AgBiBr₆ HC successfully combines the anisotropy of 2D double perovskites with the well-defined interface provided by heterogeneous integration. Driven by the built-in electric field in junction, photodetectors of HCs exhibit unique polarization dependence of zero-bias photocurrent with a large anisotropy ratio up to 9, which is 6 times amplified as compared to the pristine 2D (BLA)₂ CsAgBiBr₇ . More importantly, the present devices can remain polarization-sensitive with incident light intensity down to the nW cm^-2 level. Our study on lead-free hybrid perovskite HCs marks a step toward establishing robust material foundations for fundamental scientific investigations and the development of optoelectronic devices.

Synthesis, dielectric, magnetic, and photoluminescence properties of two new hybrid rare-earth double perovskites

Two new organic–inorganic hybrid double perovskites (R3HQ)₄CsSm(NO₃)₈ (1) (R3HQ = (R)-(-)-3-quinuclidinol) and (R3HQ)₄CsEu(NO₃)₈ (2) were synthesized and characterized. Compounds 1 and 2 exhibit obvious phase transitions at 379 and 375 K, respectively, confirmed by differential scanning calorimetry (DSC) and variable temperature powder X-ray diffraction. The rapid switching between high- and low-dielectric states makes it a typical dielectric material with a switchable dielectric constant for thermal stimulus response. Furthermore, 1 and 2 show attractive photoluminescence and paramagnetic behavior, and the fluorescence quantum yield of 2 reached 14.6%. These results show that compounds 1 and 2 can be used as excellent candidates for multifunctional intelligent materials, which also provides a new way for development of multifunctional materials.

Synthesis and Characterization of a Displacement-Type Ferroelectric-Ferroelectric Phase Transition Compound [(NH3)(CH2)3(NH3)]2[InBr6]Br·H2O

Ferroelectric materials have aroused the researchers' great interest due to their wide applications. Here, a displacement-type ferroelectric-ferroelectric phase transition material [(NH₃)(CH₂)₃(NH₃)]₂[InBr₆]Br·H₂O (1) with T_c = 143 K was successfully prepared. The ferroelectric phase transition is verified by the characterization techniques such as differential scanning calorimetry, single-crystal structure elucidation, dielectric and ferroelectric measurements. The single-crystal structure elucidation reveals that the displacement and distortion of [(NH₃)(CH₂)₃(NH₃)]²⁺ cations lead to the phase transition from Cmc2₁ to Pca2₁. The spontaneous polarizations at 293 and 133 K are 0.15 and 0.12 μC·cm^-2, respectively. We expect that this work will help in further exploration of some new ferroelectric materials.

Organic Cation Modulation Triggered Second Harmonic Response in Manganese Halides with Bright Fluorescence

Zero-dimensional (0D) hybrid manganese halides have been recently synthesized and exhibited rich functional properties including fluorescence, ferroelectrics, and ferromagnetism. However, few studies on second-harmonic generation (SHG) behaviors of manganese halide crystals have been reported, presumably owing to the d-d transitions. Here, we report three manganese bromides, [TEA]₂MnBr₄ (TEA⁺ = tetraethylammonium; 1), [BTEA]₂MnBr₄ (BTEA⁺ = benzyltriethylammonium; 2), and [BTMA]₂MnBr₄ (BTMA⁺= benzyltrimethylammonium; 3), with linear and nonlinear optical properties via benzyl or ethyl/methyl substitution strategies. They feature 0D structures containing isolated [MnBr₄]^2- anions and quaternary ammonium cations with different sizes inserted for charge balance. They all show green phosphorescence, and 2 possesses good luminescence efficiency with a quantum yield of 97.8%, which is larger than those of 1 (79%) and 3 (72%). Specifically, acentric 1 and 3 present effective SHG responses about 0.48 and 0.59 times that of KDP, respectively. The result throws light on the new properties of the hybrid manganese halides and provides a new way to develop novel nonlinear optical-active organic-inorganic hybrid metal halides.

Incorporating an Aromatic Cationic Spacer to Assemble 2D Polar Perovskite Crystals toward Self-Powered Detection of Quite Weak Polarized Light

Two-dimensional (2D) hybrid perovskites with intrinsic attributes of structural and optical anisotropy are holding a bright promise for polarization-sensitive photodetection. However, studies on self-powered detection to quite weak polarized light remain scarce in this 2D family. By incorporating an aromatic spacer into the 3D cubic prototype, we have successfully assembled a new 2D hybrid perovskite with a polar motif, (FPEA)₂(MA)Pb₂I₇ (FMPI, where FPEA is 4-fluorophenethylammonium and MA is methylammonium). Its unique 2D quantum-well structure allows optical absorption dichroism with a large ratio of ∼3.15, and the natural polarity results in a notable bulk photovoltaic effect. Further, centimeter-size crystals (10 × 10 × 3 mm³) of FMPI were facilely obtained by the temperature cooling method, and its crystal-based detectors enable excellent self-powered detection of quite weak polarized light, showing a notable polarization-sensitive ratio (∼1.5), extremely low detection limit (∼100 nW/cm²), and antifatigued stability. The alloyed aromatic cationic spacers facilitate the polarity and enhanced phase stability. This study paves a way for further exploration of new 2D perovskite candidates toward optoelectronic device applications.

Dangling Octahedra Enable Edge States in 2D Lead Halide Perovskites

The structural reconstruction at the crystal layer edges of 2D lead halide perovskites (LHPs) leads to unique edge states (ES), which are manifested by prolonged carrier lifetime and reduced emission energy. These special ES can effectively enhance the optoelectronic performance of devices, but their intrinsic origin and working mechanism remain elusive. Here it is demonstrated that the ES of a family of 2D Ruddlesden-Popper LHPs [BA₂ CsPb₂ Br₇ , BA₂ MAPb₂ Br₇ , and BA₂ MA₂ Pb₃ Br₁₀ (BA = butylammonium; MA = methylammonium)] arise from the rotational symmetry elevation of the PbBr₆ octahedra dangling at the crystal layer edges. These dangling octahedra give rise to localized electronic states that enable an effective transport of electrons from the interior to layer edges, and the population of electrons in both the interior states and the ES can be manipulated via controlling the external fields. Moreover, the abundant phonons, activated by the dangling octahedra, can interact with electrons to facilitate radiative recombination, counterintuitive to the suppressive role commonly observed in conventional semiconductors. This work unveils the intrinsic atomistic and electronic origins of ES in 2D LHPs, which can stimulate the exploration of ES-based exotic optoelectronic properties and the corresponding design of high-performance devices for these emergent low-dimensional semiconductors.