Interaction of nanoparticles with lipid membrane

Absorption of Polypropylene in Dipalmitoylphosphatidylcholine Membranes: The Role of Molecular Weight and Initial Configuration of Polymer Chains

We study by molecular dynamics simulations the absorption of polypropylene (PP) chains within a dipalmitoylphosphatidylcholine (DPPC) lipid membrane in aqueous solvent. DPPC represents the most abundant phospholipid in biological membranes, while PP is one of the most common synthetic polymers diffused in the anthropic environment. By following in detail the absorption process, and the corresponding structural modification undergone by the membrane, we show how the initial configuration and the PP molecular weight determine the overall behavior of the system. Specifically, if PP chains initially lie on the DPPC surface, they are fully absorbed; likewise, polymers initially included within the membrane cannot escape from. On the other hand, if polymers are placed sufficiently apart from the membrane, they have time to join together and coalesce into a few nanoparticles. At contact, such nanoparticles may completely dissolve (for low molecular weight) and then be absorbed. For high molecular weight, not all of them dissolve, and therefore the system attains a condition in which some of the chains are absorbed, while others form a residual nanoparticle staying outside (but in contact with) the membrane. Such a state─albeit energetically unfavorable with respect to a condition in which all PP chains are absorbed─remains stable, at the least over a substantial simulation time, extending in our study up to 1.6 μs. The tendency for polymers to spontaneously form aggregates, which then prefer to stay in contact with the membrane, is further corroborated by calculation of the DPPC-nanoparticle potential of mean force.

Effects of copper, and aluminium in ionic, and nanoparticulate form on growth rate and gene expression of Setaria italica seedlings

This study aims to determine the effects of copper, copper oxide nanoparticles, aluminium, and aluminium oxide nanoparticles on the growth rate and expression of ACT-1, CDPK, LIP, NFC, P5CR, P5CS, GR, and SiZIP1 genes in five days old seedling of Setaria italica ssp. maxima, cultivated in hydroponic culture. Depending on their concentration (ranging from 0.1 to 1.8 mg L-1), all tested substances had both stimulating and inhibiting effects on the growth rate of the seedlings. Copper and copper oxide-NPs had generally a stimulating effect whereas aluminium and aluminium oxide-NPs at first had a positive effect but in higher concentrations they inhibited the growth. Treating the seedlings with 0.4 mg L-1 of each tested toxicant was mostly stimulating to the expression of the genes and reduced the differences between the transcript levels of the coleoptiles and roots. Increasing concentrations of the tested substances had both stimulating and inhibiting effects on the expression levels of the genes. The highest expression levels were usually noted at concentrations between 0.4 and 1.0 mg/L of each metal and metal nanoparticle, except for SiZIP1, which had the highest transcript amount at 1.6 mg L-1 of Cu2+ and at 0.1-0.8 mg L-1 of CuO-NPs, and LIP and GR from the seedling treated with Al2O3-NPs at concentrations of 0.1 and 1.6 mg L-1, respectively.

TiO2 Nano-Biopatterning Reveals Optimal Ligand Presentation for Cell-Matrix Adhesion Formation

Nanoscale organization of transmembrane receptors is critical for cellular functions, enabled by the nanoscale engineering of bioligand presentation. Previously, a spatial threshold of ≤60 nm for integrin binding ligands in cell-matrix adhesion is demonstrated using monoliganded gold nanoparticles. However, the ligand geometric arrangement is limited to hexagonal arrays of monoligands, while plasmonic quenching limits further investigation by fluorescence-based high-resolution imaging. Here, these limitations are overcome with dielectric TiO2 nanopatterns, eliminating fluorescence quenching, thus enabling super-resolution fluorescence microscopy on nanopatterns. By dual-color super-resolution imaging, high precision and consistency among nanopatterns, bioligands, and integrin nanoclusters are observed, validating the high quality and integrity of both nanopattern functionalization and passivation. By screening TiO2 nanodiscs with various diameters, an increase in fibroblast cell adhesion, spreading area, and Yes-associated protein (YAP) nuclear localization on 100 nm diameter compared with smaller diameters was observed. Focal adhesion kinase is identified as the regulatory signal. These findings explore the optimal ligand presentation when the minimal requirements are sufficiently fulfilled in the heterogenous extracellular matrix network of isolated binding regions with abundant ligands. Integration of high-fidelity nano-biopatterning with super-resolution imaging allows precise quantitative studies to address early signaling events in response to receptor clustering and their nanoscale organization.

Decoding Nanomaterial-Biosystem Interactions through Machine Learning

The interactions between biosystems and nanomaterials regulate most of their theranostic and nanomedicine applications. These nanomaterial-biosystem interactions are highly complex and influenced by a number of entangled factors, including but not limited to the physicochemical features of nanomaterials, the types and characteristics of the interacting biosystems, and the properties of the surrounding microenvironments. Over the years, different experimental approaches coupled with computational modeling have revealed important insights into these interactions, although many outstanding questions remain unanswered. The emergence of machine learning has provided a timely and unique opportunity to revisit nanomaterial-biosystem interactions and to further push the boundary of this field. This minireview highlights the development and use of machine learning to decode nanomaterial-biosystem interactions and provides our perspectives on the current challenges and potential opportunities in this field.

Dissolved metal ions and mineral-liposome hybrid systems: Underlying interactions, synthesis, and characterization

Liposomes are versatile lipid-based vesicles with interesting physicochemical properties, making them excellent candidates for interdisciplinary applications in the medicinal, biological, and environmental sciences. The synthesis of mineral-liposome hybrid systems lends normally inert vesicles with the catalytic, magnetic, electrical, and optical properties of the integrated mineral species. Such applications require an understanding of the physicochemical interactions between organic molecules and inorganic crystal structures. This review provides an overview on these interactions and details on synthesis and characterization methods for these systems.

Impact of Biogenic and Chemogenic Selenium Nanoparticles on Model Eukaryotic Lipid Membranes

Microbial nanotechnology is an expanding research area devoted to producing biogenic metal and metalloid nanomaterials (NMs) using microorganisms. Often, biogenic NMs are explored as antimicrobial, anticancer, or antioxidant agents. Yet, most studies focus on their applications rather than the underlying mechanism of action or toxicity. Here, we evaluate the toxicity of our well-characterized biogenic selenium nanoparticles (bSeNPs) produced by the Stenotrophomonas maltophilia strain SeITE02 against the model yeast Saccharomyces cerevisiae comparing it with chemogenic SeNPs (cSeNPs). Knowing from previous studies that the biogenic extract contained bSeNPs in an organic material (OM) and supported here by Fourier transform infrared spectroscopy, we removed and incubated it with cSeNPs (cSeNPs_OM) to assess its influence on the toxicity of these formulations. Specifically, we focused on the first stages of the eukaryotic cell exposure to these samples─i.e., their interaction with the cell lipid membrane, which was mimicked by preparing vesicles from yeast polar lipid extract or phosphatidylcholine lipids. Fluidity changes derived from biogenic and chemogenic samples revealed that the bSeNP extract mediated the overall rigidification of lipid vesicles, while cSeNPs showed negligible effects. The OM and cSeNPs_OM induced similar modifications to the bSeNP extract, reiterating the need to consider the OM influence on the physical-chemical and biological properties of bSeNP extracts.

Novel customized age-dependent corneal membranes and interactions with biodegradable nanoparticles loaded with dexibuprofen

Ocular inflammation is one of the most prevalent diseases in ophthalmology and it is currently treated using eye drops of nonsteroidal antiinflammatory drugs such as dexibuprofen (DXI). However, their bioavailability is low and therefore, PLGA nanoparticles constitute a suitable approach to be administered as eyedrops. Therefore, DXI has been encapsulated into PLGA nanoparticles (DXI-NPs). Although the eye, and specifically the cornea, suffers from age-related changes in its composition, current medications are not focused on these variations. Therefore, to elucidate the interaction mechanism of DXI-NPs with the cornea in relation with age, two different corneal membrane models have been developed (corresponding to adult and elder population) using lipid monolayers, large and giant unilamellar vesicles. Interactions of both DXI and DXI-NPs were studied with these models by means of Langmuir balance technique, dipole potential, anisotropy and confocal microscopy. In addition, fluorescently labelled nanoparticles were administered to mice in order to corroborate these data obtained in vitro. It was observed that DXI-NPs interact with lipid membranes through an adhesion process, mainly in the rigid regions and afterwards DXI-NPs are internalized by a wrapping process. Furthermore, differences on the dipole potential caused by DXI-NPs in each corneal membrane have been obtained due to the increase of membrane rigidity on the ECMM. Additionally, it can be confirmed that DXI-NPs adhere to L_o phase and also inside the lipid membrane. Finally, in vitro and in vivo results corroborate that DXI-NPs are adhered to the more ordered phase. Finally, differences between interactions of DXI-NPs with the elder and adult corneal tissue were observed.

Carbon Dots-Biomembrane Interactions and Their Implications for Cellular Drug Delivery

The effect of carbon dots (CDs) on a model blayer membrane was studied as a means of comprehending their ability to affect cell membranes. Initially, the interaction of N-doped carbon dots with a biophysical liposomal cell membrane model was investigated by dynamic light scattering, z-potential, temperature-modulated differential scanning calorimetry, and membrane permeability. CDs with a slightly positive charge interacted with the surface of the negative-charged liposomes and evidence indicated that the association of CDs with the membrane affects the structural and thermodynamic properties of the bilayer; most importantly, it enhances the bilayer's permeability against doxorubicin, a well-known anticancer drug. The results, like those of similar studies that surveyed the interaction of proteins with lipid membranes, suggest that carbon dots are partially embedded in the bilayer. In vitro experiments employing breast cancer cell lines and human healthy dermal cells corroborated the findings, as it was shown that the presence of CDs in the culture medium selectively enhanced cell internalization of doxorubicin and, subsequently, increased its cytotoxicity, acting as a drug sensitizer.

Advances in Drug Delivery Systems Based on Red Blood Cells and Their Membrane-Derived Nanoparticles

Red blood cells (RBCs) and RBC membrane-derived nanoparticles have been historically developed as bioinspired drug delivery systems to combat the issues of premature clearance, toxicity, and immunogenicity of synthetic nanocarriers. RBC-based delivery systems possess characteristics including biocompatibility, biodegradability, and long circulation time, which make them suited for systemic administration. Therefore, they have been employed in designing optimal drug formulations in various preclinical models and clinical trials to treat a wide range of diseases. In this review, we provide an overview of the biology, synthesis, and characterization of drug delivery systems based on RBCs and their membrane including whole RBCs, RBC membrane-camouflaged nanoparticles, RBC-derived extracellular vesicles, and RBC hitchhiking. We also highlight conventional and latest engineering strategies, along with various therapeutic modalities, for enhanced precision and effectiveness of drug delivery. Additionally, we focus on the current state of RBC-based therapeutic applications and their clinical translation as drug carriers, as well as discussing opportunities and challenges associated with these systems.

Structural Characterization of Nanoparticle-Supported Lipid Bilayer Arrays by Grazing Incidence X-ray and Neutron Scattering

Arrays of nanoparticle-supported lipid bilayers (nanoSLB) are lipid-coated nanopatterned interfaces that provide a platform to study curved model biological membranes using surface-sensitive techniques. We combined scattering techniques with direct imaging, to gain access to sub-nanometer scale structural information on stable nanoparticle monolayers assembled on silicon crystals in a noncovalent manner using a Langmuir-Schaefer deposition. The structure of supported lipid bilayers formed on the nanoparticle arrays via vesicle fusion was investigated using a combination of grazing incidence X-ray and neutron scattering techniques complemented by fluorescence microscopy imaging. Ordered nanoparticle assemblies were shown to be suitable and stable substrates for the formation of curved and fluid lipid bilayers that retained lateral mobility, as shown by fluorescence recovery after photobleaching and quartz crystal microbalance measurements. Neutron reflectometry revealed the formation of high-coverage lipid bilayers around the spherical particles together with a flat lipid bilayer on the substrate below the nanoparticles. The presence of coexisting flat and curved supported lipid bilayers on the same substrate, combined with the sub-nanometer accuracy and isotopic sensitivity of grazing incidence neutron scattering, provides a promising novel approach to investigate curvature-dependent membrane phenomena on supported lipid bilayers.

Interaction Kinetics of Individual mRNA-Containing Lipid Nanoparticles with an Endosomal Membrane Mimic: Dependence on pH, Protein Corona Formation, and Lipoprotein Depletion

Lipid nanoparticles (LNPs) have emerged as potent carriers for mRNA delivery, but several challenges remain before this approach can offer broad clinical translation of mRNA therapeutics. To improve their efficacy, a better understanding is required regarding how LNPs are trapped and processed at the anionic endosomal membrane prior to mRNA release. We used surface-sensitive fluorescence microscopy with single LNP resolution to investigate the pH dependency of the binding kinetics of ionizable lipid-containing LNPs to a supported endosomal model membrane. A sharp increase of LNP binding was observed when the pH was lowered from 6 to 5, accompanied by stepwise large-scale LNP disintegration. For LNPs preincubated in serum, protein corona formation shifted the onset of LNP binding and subsequent disintegration to lower pH, an effect that was less pronounced for lipoprotein-depleted serum. The LNP binding to the endosomal membrane mimic was observed to eventually become severely limited by suppression of the driving force for the formation of multivalent bonds during LNP attachment or, more specifically, by charge neutralization of anionic lipids in the model membrane due to their association with cationic lipids from earlier attached LNPs upon their disintegration. Cell uptake experiments demonstrated marginal differences in LNP uptake in untreated and lipoprotein-depleted serum, whereas lipoprotein-depleted serum increased mRNA-controlled protein (eGFP) production substantially. This complies with model membrane data and suggests that protein corona formation on the surface of the LNPs influences the nature of the interaction between LNPs and endosomal membranes.

The effect of biomolecular corona on adsorption onto and desorption from a model lipid membrane

The current lack of insight into nanoparticle-cell membrane interactions hampers smart design strategies and thereby the development of effective nanodrugs. Quantitative and methodical approaches utilizing cell membrane models offer an opportunity to unravel particle-membrane interactions in a detailed manner under well controlled conditions. Here we use total internal reflection microscopy for real-time studies of the non-specific interactions between nanoparticles and a model cell membrane at 50 ms temporal resolution over a time course of several minutes. Maintaining a simple lipid bilayer system across conditions, adsorption and desorption were quantified as a function of biomolecular corona, particle size and fluid flow. The presence of a biomolecular corona reduced both the particle adsorption rate onto the membrane and the duration of adhesion, compared to pristine particle conditions. Particle size, on the other hand, was only observed to affect the adsorption rate. The introduction of flow reduced the number of adsorption events, but increased the residence time. Lastly, altering the composition of the membrane itself resulted in a decreased number of adsorption events onto negatively charged bilayers compared to neutral bilayers. Overall, a model membrane system offers a facile platform for real-time imaging of individual adsorption-desorption processes, revealing complex adsorption kinetics, governed by particle surface energy, size dependent interaction forces, flow and membrane composition.

Surface and Structure of Phosphatidylcholine Membranes Reconstructed with CoFe2O4 Nanoparticles

Structural changes in phosphatidylcholine lipid membranes caused by the introduction of insoluble CoFe₂O₄ nanoparticles (NPs) are analyzed. Changes in nuclear magnetic resonance spectrum, infrared spectrum, and ionic conductivity of membranes are observed with the addition of NPs. The presence of NPs in membranes is proved by atomic force and magnetic force microscopy. Structural changes in the membranes in the vicinity of the lipid C-O bonds caused by NPs are observed by Scanning near-field optical microscopy. Analysis of nuclear magnetic resonance (NMR) spectra allowed us to identify the affected atomic groups in the membrane surface layers. Conductivity measurements of the bilayer membranes were performed in DC as well as in time-resolved modes. Hydrophobic NPs stimulate surface distortion and creation of pores, which depending on NP concentration leads to an increase in the ionic conductivity of membranes. Concentration dependence demonstrating percolation threshold was analyzed in the frame of the fractal theory approach.

Membrane curvature and PS localize coagulation proteins to filopodia and retraction fibers of endothelial cells

Prior reports indicate that the convex membrane curvature of phosphatidylserine (PS)-containing vesicles enhances formation of binding sites for factor Va and lactadherin. Yet, the relationship of convex curvature to localization of these proteins on cells remains unknown. We developed a membrane topology model, using phospholipid bilayers supported by nano-etched silica substrates, to further explore the relationship between curvature and localization of coagulation proteins. Ridge convexity corresponded to maximal curvature of physiologic membranes (radii of 10 or 30 nm) and the troughs had a variable concave curvature. The benchmark PS probe lactadherin exhibited strong differential binding to the ridges, on membranes with 4% to 15% PS. Factor Va, with a PS-binding motif homologous to lactadherin, also bound selectively to the ridges. Bound factor Va supported coincident binding of factor Xa, localizing prothrombinase complexes to the ridges. Endothelial cells responded to prothrombotic stressors and stimuli (staurosporine, tumor necrosis factor-α [TNF- α]) by retracting cell margins and forming filaments and filopodia. These had a high positive curvature similar to supported membrane ridges and selectively bound lactadherin. Likewise, the retraction filaments and filopodia bound factor Va and supported assembly of prothrombinase, whereas the cell body did not. The perfusion of plasma over TNF-α-stimulated endothelia in culture dishes and engineered 3-dimensional microvessels led to fibrin deposition at cell margins, inhibited by lactadherin, without clotting of bulk plasma. Our results indicate that stressed or stimulated endothelial cells support prothrombinase activity localized to convex topological features at cell margins. These findings may relate to perivascular fibrin deposition in sepsis and inflammation.

Multiparametric cytotoxicity assessment: the effect of gold nanoparticle ligand functionalization on SKOV3 ovarian carcinoma cell death

Gold nanoparticles (AuNP) are promising anti-cancer agents because of their modifiable properties and high biocompatibility. This study used multiple parallel analyses to investigate the cytotoxic properties of 5 nm AuNP conjugated to four different ligands with distinct surface chemistry: polyethylene glycol (PEG), trimethylammonium bromide (TMAB), 4-dimethylaminopyridine (DMAP), and carboxyl (COOH). We used a range of biochemical and high-content microscopy methods to evaluate the metabolic function, oxidative stress, cell health, cell viability, and cell morphology in SKOV3 ovarian cancer cells. Each AuNP displayed a distinct cytotoxicity profile. All AuNP species assessed exhibited signs of dose-dependent cytotoxicity when morphology, clonogenic survival, lysosomal uptake, or cell number were measured as the marker of toxicity. All particles except for AuNP-COOH increased SKOV3 apoptosis. In contrast, AuNP-TMAB was the only particle that did not alter the metabolic function or induce significant signs of oxidative stress. These results demonstrate that AuNP surface chemistry impacts the magnitude and mechanism of SKOV3 cell death. Together, these findings reinforce the important role for multiparametric cytotoxicity characterization when considering the utility of novel particles and surface chemistries.

Fluidity-Guided Assembly of Au@Pt on Liposomes as a Catalase-Powered Nanomotor for Effective Cell Uptake in Cancer Cells and Plant Leaves

The fluidity of the liposomes is essential to nanoparticle-membrane interactions. We herein report a liposomal nanomotor system by controlling the self-assembly behavior of gold core-platinum shell nanoparticles (Au@Pt) on liposomes. Au@Pt can aggregate immediately on fluid-phase dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes, forming an uneven distribution. By control of the lipid phase and fluidity, either using pure 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) above its phase transition temperature or adding cholesterol as an adjuvant to DPPC lipids, we precisely control the assembly of Au@Pt on liposomes. Au@Pt maintained high catalase-like activity on the liposomal surface, promoting the decomposition of H₂O₂ and the movement of the liposomal nanomotors. Finally, we demonstrate that liposomal nanomotors are biocompatible and they can speed up the cellular uptake in mammalian HepG2 cancer cells and Nicotiana tabacum (Nb) plant leaves. This liposomal nanomotor system is expected to be further investigated in biomedicine and plant nanotechnology.

The Role of in silico Research in Developing Nanoparticle-Based Therapeutics

Nanoparticles (NPs) hold great potential as therapeutics, particularly in the realm of drug delivery. They are effective at functional cargo delivery and offer a great degree of amenability that can be used to offset toxic side effects or to target drugs to specific regions in the body. However, there are many challenges associated with the development of NP-based drug formulations that hamper their successful clinical translation. Arguably, the most significant barrier in the way of efficacious NP-based drug delivery systems is the tedious and time-consuming nature of NP formulation—a process that needs to account for downstream effects, such as the onset of potential toxicity or immunogenicity, in vivo biodistribution and overall pharmacokinetic profiles, all while maintaining desirable therapeutic outcomes. Computational and AI-based approaches have shown promise in alleviating some of these restrictions. Via predictive modeling and deep learning, in silico approaches have shown the ability to accurately model NP-membrane interactions and cellular uptake based on minimal data, such as the physicochemical characteristics of a given NP. More importantly, machine learning allows computational models to predict how specific changes could be made to the physicochemical characteristics of a NP to improve functional aspects, such as drug retention or endocytosis. On a larger scale, they are also able to predict the in vivo pharmacokinetics of NP-encapsulated drugs, predicting aspects such as circulatory half-life, toxicity, and biodistribution. However, the convergence of nanomedicine and computational approaches is still in its infancy and limited in its applicability. The interactions between NPs, the encapsulated drug and the body form an intricate network of interactions that cannot be modeled with absolute certainty. Despite this, rapid advancements in the area promise to deliver increasingly powerful tools capable of accelerating the development of advanced nanoscale therapeutics. Here, we describe computational approaches that have been utilized in the field of nanomedicine, focusing on approaches for NP design and engineering.

Single-particle spectroscopic investigation on the scattering spectrum of Au@MoS2 core-shell nanosphere heterostructure

Owing to the uniform shape of the nanospheres, the Au@MoS₂ core-shell nanosphere heterostructure enables us to design nano-optoelectronic devices and nanosensors with highly tunable and reproducible optical properties. However, until now, at the single-particle level, there is still uncertainty as to how much the scattering characteristics depend on the particle size and the local environment. In this letter, we performed an in situ single-particle study of the scattering spectrum of the Au@MoS₂ core-shell nanosphere heterostructure before and after coating with the MoS₂ layer. Single-particle characterization confirms that the classic quasi-static approximation (QSA) theory can be used to predict the scattering spectra of Au@MoS₂ core-shell nanoparticles. Moreover, we have found that the A and B-exciton absorption peaks do not rely on the local refractive index change, while the position of the particle plasmon resonances does. Such features can be used as an internal reference for sensing applications against measurement errors, such as defocusing the imaging. Our results show that Au@MoS₂ core-shell nanoparticles have the potential to become one of the promising nanosensors in the field of single-particle sensing.

A modified Jarzynski free-energy estimator to eliminate non-conservative forces and its application in nanoparticle-membrane interactions

Computational methods to understand interactions in bio-complex systems are however limited to time-scales typically much shorter than in Nature. For example, on the nanoscale level, interactions between nanoparticles (NPs)/molecules/peptides and membranes are central in complex biomolecular processes such as membrane-coated NPs or cellular uptake. This can be remedied by the application of e.g. Jarzynski's equality where thermodynamic properties are extracted from non-equilibrium simulations. Although, the out of equilibrium work leads to non-conservative forces. We here propose a correction Pair Forces method, that removes these forces. Our proposed method is based on the calculation of pulling forces in backward and forward directions for the Jarzynski free-energy estimator using steered molecular dynamics simulation. Our results show that this leads to much improvement for NP-membrane translocation free energies. Although here we have demonstrated the application of the method in molecular dynamics simulation, it could be applied for experimental approaches.

Interactions of hydrophilic quantum dots with defect-free and defect containing supported lipid membranes

Quantum dots (QDs) are semiconductor nanoparticles with unique optical and electronic properties, whose interest as potential nano-theranostic platforms for imaging and sensing is increasing. The design and use of QDs requires the understanding of cell-nanoparticle interactions at a microscopic and nanoscale level. Model systems such as supported lipid bilayers (SLBs) are useful, less complex platforms mimicking physico-chemical properties of cell membranes. In this work, we investigated the effect of topographical homogeneity of SLBs bearing different surface charge in the adsorption of hydrophilic QDs. Using quartz-crystal microbalance, a label-free surface sensitive technique, we show significant differences in the interactions of QDs onto homogeneous and inhomogeneous SLBs formed following different strategies. Within short time scales, QDs adsorb onto topographically homogeneous, defect-free SLBs is driven by electrostatic interactions, leading to no layer disruption. After prolonged QD exposure, the nanomechanical stability of the SLB decreases suggesting nanoparticle insertion. In the case of inhomogeneous, defect containing layers, QDs target preferentially membrane defects, driven by a subtle interplay of electrostatic and entropic effects, inducing local vesicle rupture and QD insertion at membrane edges.

Nanoparticle-mediated specific elimination of soft cancer stem cells by targeting low cell stiffness

As the driving force of tumor progression, cancer stem cells (CSCs) hold much lower cellular stiffness than bulk tumor cells across many cancer types. However, it remains unclear whether low cell stiffness can be harnessed in nanoparticle-based therapeutics for CSC targeting. We report that breast CSCs exhibit much lower stiffness but considerably higher uptake of nitrogen-doped graphene quantum dots (N-GQDs) than bulk tumor cells. Softening/stiffening cells enhances/suppresses nanoparticle uptake through activating/inhibiting clathrin- and caveolae-mediated endocytosis, suggesting that low cell stiffness mediates the elevated uptake in soft CSCs that may lead to the specific elimination. Further, soft CSCs enhance drug release, cellular retention, and nuclear accumulation of drug-loaded N-GQDs by reducing intracellular pH and exocytosis. Remarkably, drug-loaded N-GQDs specifically eliminate soft CSCs both in vitro and in vivo, inhibit tumor but not animal growth, and reduce the tumorigenicity of xenograft cells. Our findings unveil a new mechanism by which low cellular stiffness can be harnessed in nanoparticle-based strategies for specific CSC elimination, opening a new paradigm of cancer mechanomedicine. STATEMENT OF SIGNIFICANCE: Low cell stiffness is associated with high malignancy of tumor cells and thus serves as a mechanical hallmark of CSCs. However, it remains unclear whether cellular stiffness can be exploited for specific targeting of soft CSCs. This work reports that soft CSCs exhibit high N-GQD uptake compared to stiff tumor cells, which is regulated by cellular stiffness. Further, soft CSCs have enhanced drug release, cellular retention, and nuclear accumulation of drug-loaded N-GQDs, which enable the specific elimination of malignant CSCs both in vitro and in vivo with minimal side effect. In summary, our study demonstrates that CSC's low stiffness can be harnessed as a mechanical target for specific eradication, which provides a new paradigm of cancer mechanomedicine.

Cell membrane coating integrity affects the internalization mechanism of biomimetic nanoparticles

Cell membrane coated nanoparticles (NPs) have recently been recognized as attractive nanomedical tools because of their unique properties such as immune escape, long blood circulation time, specific molecular recognition and cell targeting. However, the integrity of the cell membrane coating on NPs, a key metrics related to the quality of these biomimetic-systems and their resulting biomedical function, has remained largely unexplored. Here, we report a fluorescence quenching assay to probe the integrity of cell membrane coating. In contradiction to the common assumption of perfect coating, we uncover that up to 90% of the biomimetic NPs are only partially coated. Using in vitro homologous targeting studies, we demonstrate that partially coated NPs could still be internalized by the target cells. By combining molecular simulations with experimental analysis, we further identify an endocytic entry mechanism for these NPs. We unravel that NPs with a high coating degree (≥50%) enter the cells individually, whereas the NPs with a low coating degree (<50%) need to aggregate together before internalization. This quantitative method and the fundamental understanding of how cell membrane coated NPs enter the cells will enhance the rational designing of biomimetic nanosystems and pave the way for more effective cancer nanomedicine.

A Study of the Effects of Plasma Surface Treatment on Lipid Bilayers Self-Spreading on a Polydimethylsiloxane Substrate under Different Treatment Times

Plasma-treated poly(dimethylsiloxane) (PDMS)-supported lipid bilayers are used as functional tools for studying cell membrane properties and as platforms for biotechnology applications. Self-spreading is a versatile method for forming lipid bilayers. However, few studies have focused on the effect of plasma treatment on self-spreading lipid bilayer formation. In this paper, we performed lipid bilayer self-spreading on a PDMS surface with different treatment times. Surface characterization of PDMS treated with different treatment times is evaluated by AFM and SEM, and the effects of plasma treatment of the PDMS surface on lipid bilayer self-spreading behavior is investigated by confocal microscopy. The front-edge velocity of lipid bilayers increases with the plasma treatment time. By theoretical analyses with the extended-DLVO modeling, we find that the most likely cause of the velocity change is the hydration repulsion energy between the PDMS surface and lipid bilayers. Moreover, the growth behavior of membrane lobes on the underlying self-spreading lipid bilayer was affected by topography changes in the PDMS surface resulting from plasma treatment. Our findings suggest that the growth of self-spreading lipid bilayers can be controlled by changing the plasma treatment time.

A multiplexed phospholipid membrane platform for curvature sensitive protein screening

The curvature of lipid membranes plays a key role in many relevant biological processes such as membrane trafficking, vesicular budding and host-virus interactions. In vitro studies on the membrane curvature of simplified biomimetic models in the nanometer range are challenging, due to their complicated nanofabrication processes. In this work, we propose a simple and low-cost platform for curvature sensitive protein screening, prepared through scanning probe lithography (SPL) methods, where lipid bilayer patches of different compositions can be multiplexed onto substrate areas with tailored local curvature. The curvature is imposed by anchoring nanoparticles of the desired size to the substrate prior to lithography. As a proof of principle, we demonstrate that a positive curvature membrane sensitive protein derived from the BAR domain of Nadrin2 binds selectively to lipid patches patterned on substrate areas coated with 100 nm nanoparticles. The platform opens up a path for screening curvature-dependent protein-membrane interaction studies by providing a flexible and easy to prepare substrate with control over lipid composition and membrane curvature.

Eco-Interactions of Engineered Nanomaterials in the Marine Environment: Towards an Eco-Design Framework

Marine nano-ecotoxicology has emerged with the purpose to assess the environmental risks associated with engineered nanomaterials (ENMs) among contaminants of emerging concerns entering the marine environment. ENMs’ massive production and integration in everyday life applications, associated with their peculiar physical chemical features, including high biological reactivity, have imposed a pressing need to shed light on risk for humans and the environment. Environmental safety assessment, known as ecosafety, has thus become mandatory with the perspective to develop a more holistic exposure scenario and understand biological effects. Here, we review the current knowledge on behavior and impact of ENMs which end up in the marine environment. A focus on titanium dioxide (n-TiO₂) and silver nanoparticles (AgNPs), among metal-based ENMs massively used in commercial products, and polymeric NPs as polystyrene (PS), largely adopted as proxy for nanoplastics, is made. ENMs eco-interactions with chemical molecules including (bio)natural ones and anthropogenic pollutants, forming eco- and bio-coronas and link with their uptake and toxicity in marine organisms are discussed. An ecologically based design strategy (eco-design) is proposed to support the development of new ENMs, including those for environmental applications (e.g., nanoremediation), by balancing their effectiveness with no associated risk for marine organisms and humans.

Lipid-Coated MCM-41 Mesoporous Silica Nanoparticles Loaded with Berberine Improved Inhibition of Acetylcholine Esterase and Amyloid Formation

Selective permeability of the blood-brain barrier limits effective treatment of neurodegenerative disorders. In the present study, brain-targeted lipid-coated mesoporous silica nanoparticles (MSNs) containing berberine (BBR) were synthesized for the effective treatment of Alzheimer's disease (AD). The study involved synthesis of Mobil Composition of Matter-41 (MCM-41) mesoporous silica nanoparticles (MSNs), BBR loading, and lipid coating of MSNs (MSNs-BBR-L) and in vitro and in vivo characterization of MSNs-BBR-L. The liposomes (for lipid coating) were prepared by the thin-film hydration method. Transmission electron microscopy (TEM) images indicated 5 nm thickness of the lipid coating. Dynamic light scattering (DLS) and TEM results confirmed that the size of synthesized MSNs-BBR-L was in the range of 80-100 nm. The X-ray diffraction (XRD) pattern demonstrated retention of the ordered structure of BBR after encapsulation and lipid coating. Fourier transform infrared (FTIR) spectrum confirmed the formation of a lipid coat over the MSN particles. MSNs-BBR-L displayed significantly (p < 0.05) higher acetylcholine esterase (AChE) inhibitory activity. The study confirmed significant (p < 0.05) amyloid fibrillation inhibition and decreased the malondialdehyde (MDA) level by MSNs-BBR-L. Pure BBR- and MSNs-BBR-L-treated AD animals showed a significant decrease in the BACE-1 level compared to scopolamine-intoxicated mice. Eight times higher area under the curve for MSNs-BBR-L (2400 ± 27.44 ng h/mL) was recorded compared to the pure BBR (295.5 ± 0.755 ng h/mL). Overall, these results highlight the utility of MSNs-BBR-L as promising drug delivery vehicles for brain delivery of drugs.

Coagulation-Inspired Direct Fibrinogen Assay Using Plasmonic Nanoparticles Functionalized with Red Blood Cell Membranes

The fast measurement of fibrinogen is essential in evaluating life-threatening sepsis and cardiovascular diseases. Here, we aim to utilize biomimetic plasmonic Au nanoparticles using red blood cell membranes (RBCM-AuNPs) and demonstrate nanoscale coagulation-inspired fibrinogen detection via cross-linking between RBCM-AuNPs. The proposed biomimetic RBCM-AuNPs are highly suitable for fibrinogen detection because hemagglutination, occurring in the presence of fibrinogen, induces a shift in the localized surface plasmon resonance of the NPs. Specifically, when the two ends of the fibrinogen protein are bound to receptors on separate RBCM-AuNPs, cross-linking of the RBCM-AuNPs occurs, yielding a corresponding plasmon shift within 10 min. This coagulation-inspired fibrinogen detection method, with a low sample volume, high selectivity, and high speed, could facilitate the diagnosis of sepsis and cardiovascular diseases.

Boron nitride nanosheets elicit significant hemolytic activity via destruction of red blood cell membranes

Boron nitride (BN) nanosheets have emerged as promising nanomaterials in a wide range of biomedical applications. Despite extensive studies on these bio-nano interfacial systems, the underlying molecular mechanisms remain elusive. In this study, we used hemolysis assays and morphology observations to demonstrate for the first time that BN nanosheets can cause damages to the red-blood-cell membranes, leading to significant hemolysis. Further molecular dynamics simulations revealed that BN nanosheets can penetrate into the cell membrane and also extract considerable amount of phospholipid molecules directly from the lipid bilayer. The potential of mean force calculations then showed that their penetration effect was thermodynamically favorable due to the strong attractive van der Waals interactions between BN nanosheets and phospholipids. Overall, these findings provided valuable insights into the interaction of BN nanosheets with cell membranes at the atomic level, which can help future de novo design of BN-based nanodevices with better biocompatibility.

Biomedical application of mesoporous silica nanoparticles as delivery systems: a biological safety perspective

The application of mesoporous silica nanoparticles (MSNs) as drug delivery systems to deliver drugs, proteins, and genes has expanded considerably in recent years, using in vitro and animal studies. For future translation to clinical applications, the biological safety aspects of MSNs must be considered carefully. This paper reviews the biosafety of MSNs, examining key issues such as biocompatibility, effects on immune cells and erythrocytes, biodistribution, biodegradation and clearance, and how these vary depending on the effects of the physical and chemical properties of MSNs such as particle size, porosity, morphology, surface charge, and chemical modifications. The future use of MSNs as a delivery system must extend beyond what has been learnt thus far using rodent animal models to encompass larger animals.

Enhanced and long-term CT imaging tracking of transplanted stem cells labeled with temperature-responsive gold nanoparticles

Gold nanoparticles (AuNPs) have been extensively employed for computed tomography (CT) imaging in cell labeling and tracking because of their strong X-ray attenuation coefficient and excellent biocompatibility. However, the design and synthesis of stimuli-responsive AuNPs to modulate their endocytosis and exocytosis for optimal cell labeling and tracking are promising but challenging. Herein, we report an innovative labeling strategy based on temperature-responsive AuNPs (TRAuNPs) with high cell labeling efficiency and extended intracellular retention duration. We have manifested that the TRAuNP labeling imposes a negligible adverse effect on the function of human mesenchymal stem cells (hMSCs). Further experiment with idiopathic pulmonary fibrosis (IPF) model mice has demonstrated the feasibility of TRAuNP labeling for long time CT imaging tracking of transplanted hMSCs. What's more, the survival of transplanted hMSCs could also be monitored simultaneously using bioluminescence imaging after the expression of luciferase reporter genes. Therefore, we believe that this dual-modal labeling and tracking strategy enables visualization of the transplanted hMSCs in vivo, which may provide an important insight into the role of stem cells in the IPF therapy.

Interaction of Aromatic Amino Acid-Functionalized Gold Nanoparticles with Lipid Bilayers: Insight into the Emergence of Novel Lipid Corona Formation

The coating of proteins and lipids around the surface of the nanoparticles is known as "protein corona" and "lipid corona", respectively, which have promising biomedical applications. While protein corona formation is well-known, the lipid corona is relatively new and its stability is yet to be explored. In the present contribution, we report a novel lipid corona formation and its underlying mechanism using aromatic amino acid-functionalized gold nanoparticles (Au-AA NPs) as a template by means of spectroscopic (steady-state UV-visible and fluorescence) and imaging (CLSM, HR-TEM, and AFM) techniques. Our study demonstrates that in the presence of high lipid concentration Au-AA NPs intrinsically tow the lipid molecules from the lipid vesicles and decorate themselves by lipid leading to unique lipid corona formation. In contrast, at low lipid concentration Au-AA NPs undergo lipid-induced aggregation. The lipid-nanoparticle interaction is a time-dependent phenomenon and depends on the surface charge of both the lipid and the Au-AA NPs. The HR-TEM analysis indicates that the partial lipid coating is an intermediate step of lipid-induced aggregation and lipid corona formation of the Au-AA NPs. Significantly, we found that the colloidal property of these lipid-coated nanoparticles (lipid corona) is immune to resist extreme harsh conditions, that is, high acidic pH, several repetitive freeze-thaw cycles, and high salt concentration. The extra stability of Au-AA NPs upon the formation of lipid corona allows us to introduce new engineered nanoparticles for future prospective.

Stability of Lipid Coatings on Nanoparticle-Decorated Surfaces

Lipid membranes supported on solid surfaces and nanoparticles find multiple applications in industrial and biomedical technologies. Here, we explore in silico the mechanisms of the interactions of lipid membranes with nanostructured surfaces with deposited nanoparticles and explain the characteristic particle size dependence of the uniformity and stability of lipid coatings observed in vitro. Simulations are performed to demonstrate the specifics of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid membrane adhesion to hydrophilic and hydrophobic nanoparticles ranging in size from 1.5 to 40 nm using an original coarse-grained molecular dynamics model with implicit solvent and large simulation boxes (scales up to 280 × 154 × 69 nm³). We find that one of the major factors that affects the uniformity and stability of lipid coatings is the disjoining pressure in the water hydration layer formed between the lipid membrane and hydrophilic solid surface. This effect is accounted for by introducing a special long-range lipid-solid interaction potential that mimics the effects of the disjoining pressure in thin water layers. Our simulations reveal the physical mechanisms of interactions of lipid bilayers with solid surfaces that are responsible for the experimentally observed nonmonotonic particle size dependence of the uniformity and stability of lipid coatings: particles smaller than the hydration layer thickness (<2-3 nm) or larger than ∼20 nm are partially or fully enfolded by a lipid bilayer, whereas particles of the intermediate size (5-20 nm) cause membrane perforation and pore formation. In contrast, hydrophobic nanoparticles, which repel the hydration layer, tend to be encapsulated within the hydrophobic interior of the membrane and coated by the lipid monolayer. The proposed model can be further extended and applied to a wide class of systems comprising nanoparticles and nanostructured substrates interacting with lipid and surfactant bilayers and monolayers.

Antibacterial Action of Nanoparticles by Lethal Stretching of Bacterial Cell Membranes

It is commonly accepted that nanoparticles (NPs) can kill bacteria; however, the mechanism of antimicrobial action remains obscure for large NPs that cannot translocate the bacterial cell wall. It is demonstrated that the increase in membrane tension caused by the adsorption of NPs is responsible for mechanical deformation, leading to cell rupture and death. A biophysical model of the NP-membrane interactions is presented which suggests that adsorbed NPs cause membrane stretching and squeezing. This general phenomenon is demonstrated experimentally using both model membranes and Pseudomonas aeruginosa and Staphylococcus aureus, representing Gram-positive and Gram-negative bacteria. Hydrophilic and hydrophobic quasi-spherical and star-shaped gold (Au)NPs are synthesized to explore the antibacterial mechanism of non-translocating AuNPs. Direct observation of nanoparticle-induced membrane tension and squeezing is demonstrated using a custom-designed microfluidic device, which relieves contraction of the model membrane surface area and eventual lipid bilayer collapse. Quasi-spherical nanoparticles exhibit a greater bactericidal action due to a higher interactive affinity, resulting in greater membrane stretching and rupturing, corroborating the theoretical model. Electron microscopy techniques are used to characterize the NP-bacterial-membrane interactions. This combination of experimental and theoretical results confirm the proposed mechanism of membrane-tension-induced (mechanical) killing of bacterial cells by non-translocating NPs.

Structural and biochemical modifications of model and native membranes of human immune cells in response to the action of zinc oxide nanoparticles

The development of nanotechnology has led to the increased production of zinc oxide nanoparticles (ZnO-NPs) and their application in a wide variety of everyday products. It creates the need for a full assessment of their safety for humans. The aim of the study was to assess the toxic effects of ZnO-NPs on model human cells of the immune system: U-937, HL-60, HUT-78, and COLO-720L. Particular attention was paid to the direct interaction of the nanoparticles with membrane lipids and the role of zinc ions in the mechanism of their toxicity. Cell viability, lipid peroxidation, cell membrane integrity, and the amount of zinc ions released from nanoparticles were tested. Disruption in cell metabolism was noted for ZnO-NPs concentrations from 6.25 mg/L. Contact with ZnO-NPs caused lipid peroxidation of all cells and correlated with membrane disruption of HL-60, HUT-78, and COLO-720L cells. Model monolayers (Langmuir technique) were used to assess the interaction of the nanoparticles with the studied lipids. Physicochemical parameters, such as the area per molecule at maximal layer compression, the pressure at which the monolayer collapses, and the static compression modulus, were calculated. The models of the HL-60 and U-937 cell membranes under ZnO-NPs treatment reacted in a different way. It has also been shown that Zn²⁺ are not the main causative factor of ZnO-NPs toxicity. Investigating the early stages of mechanism of nanoparticles toxicity will allow for a more complete risk assessment and development of methods for a safer synthesis of engineering nanomaterials.

Size dependency of gold nanoparticles interacting with model membranes

The rapid development of nanotechnology has led to an increase in the number and variety of engineered nanomaterials in the environment. Gold nanoparticles (AuNPs) are an example of a commonly studied nanomaterial whose highly tailorable properties have generated significant interest through a wide range of research fields. In the present work, we characterise the AuNP-lipid membrane interaction by coupling qualitative data with quantitative measurements of the enthalpy change of interaction. We investigate the interactions between citrate-stabilised AuNPs ranging from 5 to 60 nm in diameter and large unilamellar vesicles acting as a model membrane system. Our results reveal the existence of two critical AuNP diameters which determine their fate when in contact with a lipid membrane. The results provide new insights into the size dependent interaction between AuNPs and lipid bilayers which is of direct relevance to nanotoxicology and to the design of NP vectors.

Carbon Nanotubes Improved the Germination and Vigor of Plant Species from Peatland Ecosystem Via Remodeling the Membrane Lipidome

Application of the nanopriming technique to alleviate seed dormancy has shown promising results in various agricultural crop species. However, there is a dearth of knowledge regarding its potential use in native peatland boreal forest species to alleviate seed dormancy and improve their propagation or vigor for forest reclamation activities. Herein, we demonstrate the use of nanopriming with carbon nanotubes (CNT) to alleviate seed dormancy, improved seed germination, and seedling vigor in two boreal peatland species. Bog birch (Betula pumila L.) and Labrador tea (Rhododendron groenlandicum L.) seeds with embryo or seed coat dormancy were nanoprimed with either 20 or 40 µg/mL CNT, cold stratified at 2–4 °C for 15 days, and allowed to germinate at room temperature. The emerged seedlings’ lipidome was assessed to decipher the role of lipid metabolism in alleviating seed dormancy. We observed significant (p < 0.05) improvement in seedling germination and seedling vigor in seeds primed with multiwalled carbon nanotubes functionalized with carboxylic acids. Phosphatidylcholine (PC 18:1/18:3), phosphatidylglycerol (PG 16:1/18:3), and lysophosphatidylcholine (LPC 18:3) molecular species (C18:3 enriched) were observed to be highly correlated with the increased seed germination percentages and the enhanced seedling vigor. Mechanistically, it appears that carbon nanoprimed seeds following stratification are effective in mediating seed dormancy by remodeling the seed membrane lipids (C18:3 enriched PC, PG, and LPC) in both peatland boreal forest species. The study results demonstrate that nanopriming may provide a solution to resolve seed dormancy issues by enhancing seed germination, propagation, and seedling vigor in non-resource boreal forest species ideally suited for forest reclamation following anthropogenic disturbances.

In flow metal-enhanced fluorescence for biolabelling and biodetection

Escherichia coli bacteria were determined by in flow cytometry with laser excitation and fluorescence detection applying ultraluminescent core-shell nanoparticles based on Metal Enhanced Fluorescence (MEF). Core-shell nanoparticles consisted of a 40 nm core modified with a silica spacer grafted with Rhodamine B (RhB). The electromagnetic field in the near field of the core surface enhanced the fluorescence of RhB by plasmonic and fluorophore coupling. The hydrophilic silica spacer allowed the non-covalent interaction with the polar E. coli surface and thus ultraluminescent bacteria biolabelling was developed. Clearly, well defined and bright bacteria imaging was recorded by Laser Fluorescence Microscopy based on the non-covalent deposition of the ultraluminescent nano-emitters. Using these nano-labellers, it was possible to detect labelled E. coli by in flow cytometry. Higher values of Side-scattered light (SSC) and Forward-scattered light (FSC), and number of fluorescent event detections, were observed for labelled bacteria compared to those non-labelled. The sensitivity of the methodology was evaluated by varying bacteria concentration and acceptable analytical figures of merit were determined. Applying this methodology we could quantify E. coli from a synthetic real sample of fortified water. Similar results were obtained by bacteria counting with Laser Fluorescence Microscopy and with a cell-bacteria counter.

Bottom Effect in Atomic Force Microscopy Nanomechanics

In this work, the influence of the rigid substrate on the determination of the sample Young's modulus, the so-called bottom-effect artifact, is demonstrated by an atomic force microscopy force-spectroscopy experiment. The nanomechanical properties of a one-component supported lipid membrane (SLM) exhibiting areas of two different thicknesses are studied: While a standard contact mechanics model (Sneddon) provides two different elastic moduli for these two morphologies, it is shown that Garcia's bottom-effect artifact correction yields a unique value, as expected for an intrinsic material property. Remarkably, it is demonstrated that the ratio between the contact radius (and not only the indentation) and the sample thickness is the key parameter addressing the relevance of the bottom-effect artifact. The experimental results are validated by finite element method simulations providing a solid support to Garcia's theory. The amphiphilic nature of the investigated material is representative of several kinds of lipids, suggesting that the results have far reaching implications for determining the correct Young's modulus of SLMs. The generality of Garcia's bottom-effect artifact correction allows its application to every kind of supported soft film.

Size-Dependent Interactions of Lipid-Coated Gold Nanoparticles: Developing a Better Mechanistic Understanding Through Model Cell Membranes and in vivo Toxicity

Introduction

Humans are intentionally exposed to gold nanoparticles (AuNPs) where they are used in variety of biomedical applications as imaging and drug delivery agents as well as diagnostic and therapeutic agents currently in clinic and in a variety of upcoming clinical trials. Consequently, it is critical that we gain a better understanding of how physiochemical properties such as size, shape, and surface chemistry drive cellular uptake and AuNP toxicity in vivo. Understanding and being able to manipulate these physiochemical properties will allow for the production of safer and more efficacious use of AuNPs in biomedical applications.

Methods and Materials

Here, AuNPs of three sizes, 5 nm, 10 nm, and 20 nm, were coated with a lipid bilayer composed of sodium oleate, hydrogenated phosphatidylcholine, and hexanethiol. To understand how the physical features of AuNPs influence uptake through cellular membranes, sum frequency generation (SFG) was utilized to assess the interactions of the AuNPs with a biomimetic lipid monolayer composed of a deuterated phospholipid 1.2-dipalmitoyl-d62-sn-glycero-3-phosphocholine (dDPPC).

Results and Discussion

SFG measurements showed that 5 nm and 10 nm AuNPs are able to phase into the lipid monolayer with very little energetic cost, whereas, the 20 nm AuNPs warped the membrane conforming it to the curvature of hybrid lipid-coated AuNPs. Toxicity of the AuNPs were assessed in vivo to determine how AuNP curvature and uptake influence cell health. In contrast, in vivo toxicity tested in embryonic zebrafish showed rapid toxicity of the 5 nm AuNPs, with significant 24 hpf mortality occurring at concentrations ≥20 mg/L, whereas the 10 nm and 20 nm AuNPs showed no significant mortality throughout the five-day experiment.

Conclusion

By combining information from membrane models using SFG spectroscopy with in vivo toxicity studies, a better mechanistic understanding of how nanoparticles (NPs) interact with membranes is developed to understand how the physiochemical features of AuNPs drive nanoparticle-membrane interactions, cellular uptake, and toxicity.

Microplastics in aquatic environments: Toxicity to trigger ecological consequences

The prevalence of microplastic debris in aquatic ecosystems as a result of anthropogenic activity has received worldwide attention. Although extensive research has reported ubiquitous and directly adverse effects on organisms, only a few published studies have proposed the long-term ecological consequences. The research in this field still lacks a systematic overview of the toxic effects of microplastics and a coherent understanding of the potential ecological consequences. Here, we draw upon cross-disciplinary scientific research from recent decades to 1) seek to understand the correlation between the responses of organisms to microplastics and the potential ecological disturbances, 2) summarize the potential ecological consequences triggered by microplastics in aquatic environments, and 3) discuss the barriers to the understanding of microplastic toxicology. In this paper, the physiochemical characteristics and dynamic distribution of microplastics were related to the toxicological concerns about microplastic bioavailability and environmental perturbation. The extent of the ecological disturbances depends on how the ecotoxicity of microplastics is transferred and proliferated throughout an aquatic environment. Microplastics are prevalent; they interfere with nutrient productivity and cycling, cause physiological stress in organisms (e.g., behavioral alterations, immune responses, abnormal metabolism, and changes to energy budgets), and threaten the ecosystem composition and stability. By integrating the linkages among the toxicities that range from the erosion of individual species to the defective development of biological communities to the collapse of the ecosystem functioning, this review provides a bottom-up framework for future research to address the mechanisms underlying the toxicity of microplastics in aquatic environments and the substantial ecological consequences.

Pore formation induced by nanoparticles binding to a lipid membrane

Nanoparticles (NPs) enter a cell primarily via endocytosis, during which they are engulfed by the cell and reside in lipid vesicles named endosomes. Apart from when an endosome is pinched off the plasma membrane, structural integrity of its lipid membrane is usually well maintained. Under certain circumstances, however, such structural integrity can be considerably perturbed by a nanoparticle. For instance, recent experiments [Chu et al., Sci. Rep., 2014, 4, 4495] indicate that nanodiamonds with sharp corners can escape from an endosome by piercing its lipid membrane. Nonetheless, the energetics of this behavior and how it may be controlled by membrane adhesion and NP morphology remain unclear. In this work, we employ continuum modeling to investigate membrane pore formation induced by the spontaneous binding of a sharp nanoparticle. Based on two axial-symmetric NP models, we characterize the indispensable role played by curvature heterogeneity, membrane adhesion, and the sharpness as well as the size of a nanoparticle in 'breaking' a lipid membrane. Apart from revealing a general mechanism of NP binding-induced membrane pore formation, our results provide the reference for improving the endosomal escape of nanoparticles through manipulating their morphology, a direction that can be explored either independently or combined with existing strategies targeting NP surface chemistry.

Impact of nanomaterials on ecosystems: Mechanistic aspects in vivo

Nanotechnologies are becoming increasingly popular in modern era of human development in every aspect of life. Their impact on our ecosystem in air, soil, and water is largely unknown because of the limited amount of information available, and hence, they require considerable attention. This account highlights the important routes of nanomaterials toxicity in air, soil, and water, their possible impact on the ecosystem and aquatic life. The mechanistic aspects have been focused on the size, shape, and surface modifications of nanomaterials. The preventive measures and future directions along with appropriate designs and implementation of nanotechnologies have been proposed so as to minimize the interactions of nanomaterials with terrestrial flora and aquatic life. Specifically, the focus largely remains on the toxicity of metallic nanoparticles such as gold (Au) and silver (Ag) because of their applications in diverse fields. The account lists some prominent mechanistic routes of nanotoxicity along with in vivo experimental results based on the fundamental understanding that how nanometallic surfaces interact with plant as well as animal biological systems. The appropriate modifications of the nanometallic surfaces with biocompatible molecules are considered to be the most effective preventive measures to reduce the nanotoxicity.

Deposition of Cellulose Nanocrystals onto Supported Lipid Membranes

The deposition of cellulose nanocrystals (CNCs) on a supported lipid bilayer (SLB) was investigated at different length scales. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to probe the bilayer formation and to show for the first time the CNC deposition onto the SLB. Specifically, classical QCM-D measurements gave estimation of the adsorbed hydrated mass and the corresponding film thickness, whereas complementary experiments using D₂O as the solvent allowed the quantitative determination of the hydration of the CNC layer, showing a high hydration value. Scanning force microscopy (SFM) and total internal reflection fluorescence microscopy (TIRF) were used to probe the homogeneity of the deposited layers, revealing the structural details at the particle and film length scales, respectively, thus giving information on the effect of CNC concentration on the surface coverage. The results showed that the adsorption of CNCs on the supported lipid membrane depended on lipid composition, CNC concentration, and pH conditions, and that the binding process was governed by electrostatic interactions. Under suitable conditions, a uniform film was formed, with thickness corresponding to a CNC monolayer, which provides the basis for a relevant 2D model of a primary plant cell wall.