Design principles for shift current photovoltaics

Depolarization Field-Induced Photovoltaic Effect in Graphene/α-In2Se3/Graphene Heterostructures

The ferroelectric photovoltaic effect (FPVE) enables alternate pathways for energy conversion that are not allowed in centrosymmetric materials. Understanding the dominant mechanism of the FPVE at the ultrathin limit is important for defining the ultimate efficiency. In contrast to the wide band gap conventional thin-film ferroelectrics, 2D α-In2Se3 has an ideal band gap of 1.3 eV and enables the fabrication of ultrathin and stable heterostructures, providing the perfect platform to explore FPVE in the nanoscale limit. Here, we study the ferroelectric layer thickness-dependent FPVE in vertical few-layer graphene/α-In2Se3/graphene heterostructures. We find that the short-circuit photocurrent is antiparallel to the ferroelectric polarization and increases exponentially with decreasing thickness. We show that the observed behavior is predicted by the depolarization field model, originating from the unscreened bound charges due to the finite density of states in semimetal few-layer graphene. As a result, the heterostructures show enhancement of the power conversion efficiency, reaching 2.56 × 10-3% under 100 W/cm2 in 18 nm thick α-In2Se3, approximately 275 times more than the 50 nm thick α-In2Se3. These results demonstrate the importance of the depolarization field at the nanoscale and define design principles for the potential of harnessing FPVE at reduced dimension.

Quantum-Geometric Origin of Out-of-Plane Stacking Ferroelectricity

Stacking ferroelectricity (SFE) has been discovered in a wide range of van der Waals materials and holds promise for applications, including photovoltaics and high-density memory devices. We show that the microscopic origin of out-of-plane stacking ferroelectric polarization can be generally understood as a consequence of a nontrivial Berry phase borne out of an effective Su-Schrieffer-Heeger model description with broken sublattice symmetry, thus elucidating the quantum-geometric origin of polarization in the extremely nonperiodic bilayer limit. Our theory applies to known stacking ferroelectrics such as bilayer transition-metal dichalcogenides in 3R and T_{d} phases, as well as general AB-stacked honeycomb bilayers with staggered sublattice potential. Our explanatory and self-consistent framework based on the quantum-geometric perspective establishes quantitative understanding of out-of-plane SFE materials beyond symmetry principles.

In-plane anisotropic two-dimensional materials for twistronics

In-plane anisotropic two-dimensional (2D) materials exhibit in-plane orientation-dependent properties. The anisotropic unit cell causes these materials to show lower symmetry but more diverse physical properties than in-plane isotropic 2D materials. In addition, the artificial stacking of in-plane anisotropic 2D materials can generate new phenomena that cannot be achieved in in-plane isotropic 2D materials. In this perspective we provide an overview of representative in-plane anisotropic 2D materials and their properties, such as black phosphorus, group IV monochalcogenides, group VI transition metal dichalcogenides with 1T' and Tdphases, and rhenium dichalcogenides. In addition, we discuss recent theoretical and experimental investigations of twistronics using in-plane anisotropic 2D materials. Both in-plane anisotropic 2D materials and their twistronics hold considerable potential for advancing the field of 2D materials, particularly in the context of orientation-dependent optoelectronic devices.

Optical Second Harmonic Generation of Low-Dimensional Semiconductor Materials

In recent years, the phenomenon of optical second harmonic generation (SHG) has attracted significant attention as a pivotal nonlinear optical effect in research. Notably, in low-dimensional materials (LDMs), SHG detection has become an instrumental tool for elucidating nonlinear optical properties due to their pronounced second-order susceptibility and distinct electronic structure. This review offers an exhaustive overview of the generation process and experimental configurations for SHG in such materials. It underscores the latest advancements in harnessing SHG as a sensitive probe for investigating the nonlinear optical attributes of these materials, with a particular focus on its pivotal role in unveiling electronic structures, bandgap characteristics, and crystal symmetry. By analyzing SHG signals, researchers can glean invaluable insights into the microscopic properties of these materials. Furthermore, this paper delves into the applications of optical SHG in imaging and time-resolved experiments. Finally, future directions and challenges toward the improvement in the NLO in LDMs are discussed to provide an outlook in this rapidly developing field, offering crucial perspectives for the design and optimization of pertinent devices.

Theoretical Understanding of Nonlinear Optical Properties in Solids: A Perspective

Nonlinear optical (NLO) crystals have become a hot topic in chemical science and material physics, due to their essential role in laser technology, optical information, optoelectronics, and precision measurements. In this Perspective, we provide an overview of recent advances in second-order nonlinear optics, with a focus on two critical topics: second harmonic generation (SHG) and the bulk photovoltaic effect (BPVE). For SHG, we discuss recent progress in deep-ultraviolet (DUV) materials, highlighting their structural characteristics and nonlinear groups that contribute to their exceptional performance. For BPVE, we concentrate on the emerging field of low-dimensional materials, emphasizing their potential in a shift current. Additionally, we discuss the development of regulation approaches for NLO materials, which is vital for their practical application. Finally, we address the outlook for the field, including the challenges that must be overcome to further advance NLO materials research.

Quantifying the photocurrent fluctuation in quantum materials by shot noise

The DC photocurrent can detect the topology and geometry of quantum materials without inversion symmetry. Herein, we propose that the DC shot noise (DSN), as the fluctuation of photocurrent operator, can also be a diagnostic of quantum materials. Particularly, we develop the quantum theory for DSNs in gapped systems and identify the shift and injection DSNs by dividing the second-order photocurrent operator into off-diagonal and diagonal contributions, respectively. Remarkably, we find that the DSNs can not be forbidden by inversion symmetry, while the constraint from time-reversal symmetry depends on the polarization of light. Furthermore, we show that the DSNs also encode the geometrical information of Bloch electrons, such as the Berry curvature and the quantum metric. Finally, guided by symmetry, we apply our theory to evaluate the DSNs in monolayer GeS and bilayer MoS2 with and without inversion symmetry and find that the DSNs can be larger in centrosymmetric phase.

Identification the Role of Grain Boundaries in Polycrystalline Photovoltaics via Advanced Atomic Force Microscope

Atomicforce microscopy (AFM)-based scanning probing techniques, including Kelvinprobe force microscopy (KPFM) and conductive atomic force microscopy (C-AFM), have been widely applied to investigate thelocal electromagnetic, physical, or molecular characteristics of functional materials on a microscopic scale. The microscopic inhomogeneities of the electronic properties of polycrystalline photovoltaic materials can be examined by these advanced AFM techniques, which bridge the local properties of materials to overall device performance and guide the optimization of the photovoltaic devices. In this review, the critical roles of local optoelectronic heterogeneities, especially at grain interiors (GIs) and grain boundaries (GBs) of polycrystalline photovoltaic materials, including versatile polycrystalline silicon, inorganic compound materials, and emerging halide perovskites, studied by KPFM and C-AFM, are systematically identified. How the band alignment and electrical properties of GIs and GBs affect the carrier transport behavior are discussed from the respective of photovoltaic research. Further exploiting the potential of such AFM-based techniques upon a summary of their up-to-date applications in polycrystalline photovoltaic materials is beneficial to acomprehensive understanding of the design and manipulation principles of thenovel solar cells and facilitating the development of the next-generation photovoltaics and optoelectronics.

Giant intrinsic photovoltaic effect in one-dimensional van der Waals grain boundaries

The photovoltaic effect lies at the heart of eco-friendly energy harvesting. However, the conversion efficiency of traditional photovoltaic effect utilizing the built-in electric effect in p-n junctions is restricted by the Shockley-Queisser limit. Alternatively, intrinsic/bulk photovoltaic effect (IPVE/BPVE), a second-order nonlinear optoelectronic effect arising from the broken inversion symmetry of crystalline structure, can overcome this theoretical limit. Here, we uncover giant and robust IPVE in one-dimensional (1D) van der Waals (vdW) grain boundaries (GBs) in a layered semiconductor, ReS2. The IPVE-induced photocurrent densities in vdW GBs are among the highest reported values compared with all kinds of material platforms. Furthermore, the IPVE-induced photocurrent is gate-tunable with a polarization-independent component along the GBs, which is preferred for energy harvesting. The observed IPVE in vdW GBs demonstrates a promising mechanism for emerging optoelectronics applications.

Shift Current with Gaussian Basis Sets and General Prescription for Maximally Symmetric Summations in the Irreducible Brillouin Zone

The bulk photovoltaic effect is an experimentally verified phenomenon by which a direct charge current is induced within a non-centrosymmetric material by light illumination. Calculations of its intrinsic contribution, the shift current, are nowadays amenable from first-principles employing plane-wave bases. In this work, we present a general method for evaluating the shift conductivity in the framework of localized Gaussian basis sets that can be employed in both the length and velocity gauges, carrying the idiosyncrasies of the quantum-chemistry approach. The (possibly magnetic) symmetry of the system is exploited in order to fold the reciprocal space summations to the representation domain, allowing us to reduce computation time and unveiling the complete symmetry properties of the conductivity tensor under general light polarization.

Light-induced shift current vortex crystals in moiré heterobilayers

Transition metal dichalcogenide (TMD) moiré superlattices provide an emerging platform to explore various light-induced phenomena. Recently, the discoveries of novel moiré excitons have attracted great interest. The nonlinear optical responses of these systems are however still underexplored. Here, we report investigation of light-induced shift currents (a second-order response generating DC current from optical illumination) in the WSe2/WS2 moiré superlattice. We identify a striking phenomenon of the formation of shift current vortex crystals-i.e., two-dimensional periodic arrays of moiré-scale current vortices and associated magnetic fields with remarkable intensity under laboratory laser setup. Furthermore, we demonstrate high optical tunability of these current vortices-their location, shape, chirality, and magnitude can be tuned by the frequency, polarization, and intensity of the incident light. Electron-hole interactions (excitonic effects) are found to play a crucial role in the generation and nature of the shift current intensity and distribution. Our findings provide a promising all-optical control route to manipulate nanoscale shift current density distributions and magnetic field patterns, as well as shed light on nonlinear optical responses in moiré quantum matter and their possible applications.

Stability of mechanically exfoliated layered monochalcogenides under ambient conditions

Monochalcogenides of groups III (GaS, GaSe) and VI (GeS, GeSe, SnS, and SnSe) are materials with interesting thickness-dependent characteristics, which have been applied in many areas. However, the stability of layered monochalcogenides (LMs) is a real problem in semiconductor devices that contain these materials. Therefore, it is an important issue that needs to be explored. This article presents a comprehensive study of the degradation mechanism in mechanically exfoliated monochalcogenides in ambient conditions using Raman and photoluminescence spectroscopy supported by structural methods. A higher stability (up to three weeks) was observed for GaS. The most reactive were Se-containing monochalcogenides. Surface protrusions appeared after the ambient exposure of GeSe was detected by scanning electron microscopy. In addition, the degradation of GeS and GeSe flakes was observed in the operando experiment in transmission electron microscopy. Additionally, the amorphization of the material progressed from the flake edges. The reported results and conclusions on the degradation of LMs are useful to understand surface oxidation, air stability, and to fabricate stable devices with monochalcogenides. The results indicate that LMs are more challenging for exfoliation and optical studies than transition metal dichalcogenides such as MoS2, MoSe2, WS2, or WSe2.

Three-dimensional porous borocarbonitride composed of pentagonal motifs as a high-performance pyroelectric material

Pyroelectric materials have been attracting significant attention due to their intrinsic and permanent polarization, where the induced polarization is not associated with specific conditions, such as ferroelectric phase transition, strain gradient, dopants, and electric field. Thus, these materials have great potential for wide applications in energy conversion. Here, we propose a new 3D porous borocarbonitride termed PH-BCN, which is composed of pentagonal motifs with intrinsic polarization along the [0001] direction. Based on first-principles calculations, we show that PH-BCN possesses a record high longitudinal electromechanical coupling coefficient with the value of k33 = 97.99%, a remarkably strong SHG response (χ(2)xzx(0) = χ(2)yzy(0) = χ(2)zxx(0) = χ(2)zyy(0) = -6.23 pm V-1 and χ(2)zzz(0) = 21.21 pm V-1), and a record high shift current value of 908.58 μA V-2 due to the intrinsic vertical polarization. This study expands the family of pentagon-based materials, and may open a new frontier in the design of high-performance pyroelectric materials as well.

Manipulation of nonlinear optical responses in layered ferroelectric niobium oxide dihalides

Realization of highly tunable second-order nonlinear optical responses, e.g., second-harmonic generation and bulk photovoltaic effect, is critical for developing modern optical and optoelectronic devices. Recently, the van der Waals niobium oxide dihalides are discovered to exhibit unusually large second-harmonic generation. However, the physical origin and possible tunability of nonlinear optical responses in these materials remain to be unclear. In this article, we reveal that the large second-harmonic generation in NbOX2 (X = Cl, Br, and I) may be partially contributed by the large band nesting effect in different Brillouin zone. Interestingly, the NbOCl2 can exhibit dramatically different strain-dependent bulk photovoltaic effect under different polarized light, originating from the light-polarization-dependent orbital transitions. Importantly, we achieve a reversible ferroelectric-to-antiferroelectric phase transition in NbOCl2 and a reversible ferroelectric-to-paraelectric phase transition in NbOI2 under a certain region of external pressure, accompanied by the greatly tunable nonlinear optical responses but with different microscopic mechanisms. Our study establishes the interesting external-field tunability of NbOX2 for nonlinear optical device applications.

Berry curvature dipole generation and helicity-to-spin conversion at symmetry-mismatched heterointerfaces

The Berry curvature dipole (BCD) is a key parameter that describes the geometric nature of energy bands in solids. It defines the dipole-like distribution of Berry curvature in the band structure and plays a key role in emergent nonlinear phenomena. The theoretical rationale is that the BCD can be generated at certain symmetry-mismatched van der Waals heterointerfaces even though each material has no BCD in its band structure. However, experimental confirmation of such a BCD induced via breaking of the interfacial symmetry remains elusive. Here we demonstrate a universal strategy for BCD generation and observe BCD-induced gate-tunable spin-polarized photocurrent at WSe2/SiP interfaces. Although the rotational symmetry of each material prohibits the generation of spin photocurrent under normal incidence of light, we surprisingly observe a direction-selective spin photocurrent at the WSe2/SiP heterointerface with a twist angle of 0°, whose amplitude is electrically tunable with the BCD magnitude. Our results highlight a BCD-spin-valley correlation and provide a universal approach for engineering the geometric features of twisted heterointerfaces.

Strong bulk photovoltaic effect in engineered edge-embedded van der Waals structures

Bulk photovoltaic effect (BPVE), a second-order nonlinear optical effect governed by the quantum geometric properties of materials, offers a promising approach to overcome the Shockley-Quiesser limit of traditional photovoltaic effect and further improve the efficiency of energy harvesting. Here, we propose an effective platform, the nano edges embedded in assembled van der Waals (vdW) homo- or hetero-structures with strong symmetry breaking, low dimensionality and abundant species, for BPVE investigations. The BPVE-induced photocurrents strongly depend on the orientation of edge-embedded structures and polarization of incident light. Reversed photocurrent polarity can be observed at left and right edge-embedded structures. Our work not only visualizes the unique optoelectronic effect in vdW nano edges, but also provides an effective strategy for achieving BPVE in engineered vdW structures.

Giant Bulk Electrophotovoltaic Effect in Heteronodal-Line Systems

The realization of a giant and continuously tunable second-order photocurrent is desired for many nonlinear optical (NLO) and optoelectronic applications, which remains a great challenge. Here, based on a two-band model, we propose a concept of the bulk electrophotovoltaic effect, that is, an out-of-plane external electric field (E_{ext}) that can continuously tune in-plane shift current along with its sign flip in a heteronodal-line (HNL) system. While strong linear optical transition around the nodal loop may potentially generate giant shift current, an E_{ext} can effectively control the radius of the nodal loop, which can continuously modulate the shift-vector components inside and outside the nodal loop holding opposite signs. This concept has been demonstrated in the HNL HSnN/MoS_{2} system using first-principles calculations. The HSnN/MoS_{2} heterobilayer can not only produce a shift-current conductivity with magnitude that is one to two orders larger than other reported systems, but it can also realize a giant bulk electrophotovoltaic effect. Our finding opens new routes to create and manipulate NLO responses in 2D materials.

Acquiring Bulk Anomalous Photovoltaic Effect in Single Crystals of a Lead-Free Double Perovskite with Aromatic and Alkali Mixed-Cations

The bulk anomalous photovoltaic (BAPV) effect of acentric materials refers to a distinct concept from traditional semiconductor-based devices, of which the above-bandgap photovoltage hints at a promise for solar-energy conversion. However, it is still a challenge to exploit new BAPV-active systems due to the lacking of knowledge on the structural origin of this concept. BAPV effects in single crystals of a 2D lead-free double perovskite, (BBA)₂ CsAgBiBr₇ (1, BBA = 4-bromobenzylammonium), tailored by mixing aromatic and alkali cations in the confined architecture to form electric polarization are acquired here. Strikingly, BAPV effects manifested by above-bandgap photovoltage (V_OC ) show unique attributes of directional anisotropy and positive dependence on electrode spacing. The driving source stems from orientations of the polar aromatic spacer and Cs⁺ ion drift, being different from the known built-in asymmetry photovoltaic heterojunctions. As the first demonstration of the BAPV effect in the double perovskites, the results will enrich the family of environmentally green BAPV-active candidates and further facilitate their new optoelectronic application.

Observation of the photovoltaic effect in a van der Waals heterostructure

van der Waals (vdW) heterostructures, which can be assembled with various two-dimensional materials, provide a versatile platform for exploring emergent phenomena. Here, we report an observation of the photovoltaic effect in a WS₂/MoS₂ vdW heterostructure. Light excitation of WS₂/MoS₂ at a wavelength of 633 nm yields a photocurrent without applying bias voltages, and the excitation power dependence of the photocurrent shows characteristic crossover from a linear to square root dependence. Photocurrent mapping has clearly shown that the observed photovoltaic effect arises from the WS₂/MoS₂ region, not from Schottky junctions at electrode contacts. Kelvin probe microscopy observations show no slope in the electrostatic potential, excluding the possibility that the photocurrent originates from an unintentionally formed built-in potential.

Geometric deep optical sensing

Geometry, an ancient yet vibrant branch of mathematics, has important and far-reaching impacts on various disciplines such as art, science, and engineering. Here, we introduce an emerging concept dubbed "geometric deep optical sensing" that is based on a number of recent demonstrations in advanced optical sensing and imaging, in which a reconfigurable sensor (or an array thereof) can directly decipher the rich information of an unknown incident light beam, including its intensity, spectrum, polarization, spatial features, and possibly angular momentum. We present the physical, mathematical, and engineering foundations of this concept, with particular emphases on the roles of classical and quantum geometry and deep neural networks. Furthermore, we discuss the new opportunities that this emerging scheme can enable and the challenges associated with future developments.

Revisiting the Ferroelectric Photovoltaic Properties of Vertical BiFeO3 Capacitors: A Comprehensive Study

The ferroelectric photovoltaic effect has been extensively studied for possible applications in energy conversion and photo-electrics. The reversible spontaneous polarization gives rise to a switchable photovoltaic behavior. However, despite its long history, the origin of the ferroelectric photovoltaic effect still lacks a full understanding since multiple mechanisms such as bulk and Schottky-barrier-related interface effects are involved. Herein, we report a comprehensive study on the photovoltaic response of BiFeO₃-based vertical heterostructures, using multiple strategies to clarify its origin. We found that, under white light illumination, polarization-modulated Schottky barrier at the interface is the dominating mechanism. By varying the top metal contacts, only the photovoltaic effect of the polarization downward state is strongly modulated, suggesting selective interface contribution in different polarization states. A Schottky-barrier-free device shows negligible photovoltaic effect, suggesting the lack of bulk photovoltaic effect in vertical heterostructures under white light illumination.

Energy Interplay in Materials: Unlocking Next-Generation Synchronous Multisource Energy Conversion with Layered 2D Crystals

Layered 2D crystals have unique properties and rich chemical and electronic diversity, with over 6000 2D crystals known and, in principle, millions of different stacked hybrid 2D crystals accessible. This diversity provides unique combinations of properties that can profoundly affect the future of energy conversion and harvesting devices. Notably, this includes catalysts, photovoltaics, superconductors, solar-fuel generators, and piezoelectric devices that will receive broad commercial uptake in the near future. However, the unique properties of layered 2D crystals are not limited to individual applications and they can achieve exceptional performance in multiple energy conversion applications synchronously. This synchronous multisource energy conversion (SMEC) has yet to be fully realized but offers a real game-changer in how devices will be produced and utilized in the future. This perspective highlights the energy interplay in materials and its impact on energy conversion, how SMEC devices can be realized, particularly through layered 2D crystals, and provides a vision of the future of effective environmental energy harvesting devices with layered 2D crystals.

Enhanced shift current bulk photovoltaic effect in ferroelectric Rashba semiconductorα-GeTe:ab initiostudy from three- to two-dimensional van der Waals layered structures

The ferroelectric Rashba semiconductors (FERSCs) are endowed with a unique combination of ferroelectricity and the spin degree of freedom, resulting in a long carrier lifetime and impressive bulk photovoltaic (BPV) efficiency that reached 25% in organometal halide perovskites. The BPV efficiency can be further improved by using low-dimensional ferroelectrics however, it is inhibited by the ferroelectric instability in low-dimensional perovskites and toxicity along with phase instability of the lead-halide perovskites. To address these challenges, theα-GeTe could be of great importance which is the simplest known lead-free FERSC with an intrinsic layered structure. Therefore, in this work, we investigate the BPV properties of three- to two-dimensional van der Waals structures ofα-GeTe by calculating the shift current (SHC). We predict that the mono (1.56 Å) and bi-layers (5.44-6.14 Å)α-GeTe with the buckled honeycomb structure are dynamically stable and possess the characteristic features of the bulk up to the nanoscale limit. The SHC of ∼70μA V^-2is calculated in bulk α-GeTe which is 20 times larger than that obtained in organometal halides in the visible light. The SHC increases with decreasing the number of layers, reaching a maximum amplitude of ∼300μA V^-2at 2.67 eV in the monolayer which is more than double that obtained in monolayer GeS. We find that the SHC in monolayer α-GeTe can be further enhanced and redshifted by applying a compressive strain; which is correlated with the strong absorption of thexx-polarized light, stimulated by the more delocalized p_x/yorbital character of the density of states. Furthermore, in the bilayer structures, the magnitude of the SHC is sensitive to the layers' stacking arrangement and a maximum SHC (∼250μA V^-2) can be achieved with an AB-type stacking arrangement. Combining these results with the benefits of being environmental-friendly material makesα-GeTe a good candidate for next-generation solar cells application.

Nonlinear Optical and Photocurrent Responses in Janus MoSSe Monolayer and MoS2-MoSSe van der Waals Heterostructure

Two-dimensional (2D) transition metal dichalcogenides are promising materials platforms for a variety of optoelectronic device applications. Janus 2D materials are a rising class of 2D materials with low symmetry, which leads to the emergence of out-of-plane electric polarization and piezoelectricity. Using first-principles density functional theory, we show that monolayer and bilayer heterostructure Janus MoSSe moieties exhibit strong nonlinear optical responses that are vanishing in the non-Janus form. The absence of horizontal mirror plane symmetry enables a circular photocurrent as well as a large out-of-plane second harmonic generation (SHG) and shift photocurrent. Through a comparative study of the Janus heterostructure MoS₂-MoSSe on five distinct stacking configurations, we find that the magnitude of the out-of-plane SHG in the Janus heterostructure is enhanced due to the interlayer coupling and interference effect compared to that of monolayer MoSSe. Thus, Janus 2D materials offer a unique opportunity for exploring nonlinear optical phenomena and designing configurable layered nonlinear optical materials.

Colossal In-Plane and Out-of-Plane Shift Photocurrents in Single-Layer Two-Dimensional α-Antimonide Phosphorus

For materials lacking inversion symmetries, an interband transition induced by a photon may result in excited electrons (holes) experiencing a spatial shift leading to generation of directional photocurrents. This phenomenon known as bulk photovoltaic effect (BPVE) shift photocurrent (SPC) has recently attracted immense attention owing to its potential in generating photovoltages that are not restricted by Shockley-Queisser limitations imposed by materials' electronic band gaps. The BPVE was recently reformulated in a quantum mechanics viewpoint as the change in the geometrical phase upon photoexcitation and can now be promptly calculated from Bloch wave functions generated by first-principles calculations. The SPC of an electron (hole) is robust against crystal defects and impurities both in the interior and the surface and can be less dissipative and ultrafast. Herein, an emergence of colossal SPC in a pristine two-dimensional (2D) single-layer α-SbP crystal is predicted from first-principles calculations. An external electric field is further applied on the 2D crystal, and a large SPC enhancement is achieved. The locations of the SPC peaks due to both in-plane and out-of-plane responses suggest that α-SbP can generate a large photocurrent both in visible-light and ultraviolet regions. Single-layer 2D α-SbP is thus an excellent material for strong SPC. This finding is thus expected to open a pathway to exploring efficient photovoltaic devices based on monolayer α-SbP and similar materials.

Intelligent infrared sensing enabled by tunable moiré quantum geometry

Quantum geometric properties of Bloch wave functions in solids, that is, Berry curvature and the quantum metric, are known to significantly influence the ground- and excited-state behaviour of electrons^1-5. The bulk photovoltaic effect (BPVE), a nonlinear phenomenon depending on the polarization of excitation light, is largely governed by the quantum geometric properties in optical transitions^6-10. Infrared BPVE has yet to be observed in graphene or moiré systems, although exciting strongly correlated phenomena related to quantum geometry have been reported in this emergent platform^11-14. Here we report the observation of tunable mid-infrared BPVE at 5 µm and 7.7 µm in twisted double bilayer graphene (TDBG), arising from the moiré-induced strong symmetry breaking and quantum geometric contribution. The photoresponse depends substantially on the polarization state of the excitation light and is highly tunable by external electric fields. This wide tunability in quantum geometric properties enables us to use a convolutional neural network^15,16 to achieve full-Stokes polarimetry together with wavelength detection simultaneously, using only one single TDBG device with a subwavelength footprint of merely 3 × 3 µm². Our work not only reveals the unique role of moiré engineered quantum geometry in tunable nonlinear light-matter interactions but also identifies a pathway for future intelligent sensing technologies in an extremely compact, on-chip manner.

Investigation of the sublimation mechanism of GeSe and GeS

GeSe and GeS have emerged as promising light-harvesting materials for photovoltaics due to their attractive optoelectronic properties, non-toxic and earth-abundant constituents, and excellent stability. Here we unveil the diatomic molecule sublimation mechanism of GeSe and GeS that directly guides the optimization of GeSe and GeS solar-cell fabricated via the close-space sublimation method.

Surface-Defect States in Photovoltaic Absorber GeSe

GeSe is an emerging promising light-harvesting material for photovoltaics due to its excellent optoelectronic properties, nontoxic and earth-abundant constituents, and high stability. In particular, perovskite-like antibonding states at the valence band maximum arising from Ge-4s and Se-4p coupling enable the bulk-defect-tolerant properties in GeSe. However, a fundamental understanding of surface-defect states in GeSe, another important factor for high-performance photovoltaics, is still lacking. Here, we investigate the surface-defect properties of GeSe through first-principle calculations. We find that different from common semiconductors possessing numerous surface dangling bonds, some GeSe surfaces are prone to reconstruction, thus eliminating the dangling bonds. The rearranged armchair edges exhibit unexpected benign defect properties, similar to those of bulk GeSe, arising from the formation of bulk-like [GeSe₃] tetrahedrons. We further show that the stable exposed (111) surfaces are hard to reconstruct due to the stiff structure but are effectively passivated by the addition of H.

Giant Third-Harmonic Optical Generation from Topological Insulator Heterostructures

The downscaling of nonlinear optical devices is significantly hindered by the inherently weak nonlinearity in regular materials. Here, we report a giant third-harmonic generation discovered in epitaxial thin films of V-VI chalcogenide topological insulators. Using a tailored substrate and capping layer, a single reflection from a 13 nm film can produce a nonlinear conversion efficiency of nearly 0.01%, a performance that rivals micron-scale waveguides made from conventional materials or metasurfaces with far more complex structures. Such strong nonlinear optical emission, absent from the topologically trivial member in the same compound family, is found to be generated by the same bulk band characteristics that are responsible for producing the band inversion and the nontrivial topological ordering. This finding reveals the possibility of obtaining superior optical nonlinearity by examining the large pool of newly discovered topological materials with similar band characteristics.

Enhanced bulk photovoltaic effect in two-dimensional ferroelectric CuInP2S6

The photocurrent generation in photovoltaics relies essentially on the interface of p-n junction or Schottky barrier with the photoelectric efficiency constrained by the Shockley-Queisser limit. The recent progress has shown a promising route to surpass this limit via the bulk photovoltaic effect for crystals without inversion symmetry. Here we report the bulk photovoltaic effect in two-dimensional ferroelectric CuInP2S6 with enhanced photocurrent density by two orders of magnitude higher than conventional bulk ferroelectric perovskite oxides. The bulk photovoltaic effect is inherently associated to the room-temperature polar ordering in two-dimensional CuInP2S6. We also demonstrate a crossover from two-dimensional to three-dimensional bulk photovoltaic effect with the observation of a dramatic decrease in photocurrent density when the thickness of the two-dimensional material exceeds the free path length at around 40 nm. This work spotlights the potential application of ultrathin two-dimensional ferroelectric materials for the third-generation photovoltaic cells.

In-plane ferroelectricity in few-layered GeS and its van der Waals ferroelectric diodes

Two-dimensional ferroelectric semiconductors (2DFeSs) have been attracting extensive research attention on account of their unique properties and versatile applications in random-access memory, digital signal processors, and neuromorphic computing. Germanium sulfide (GeS) is predicted as a typical 2DFeS with a large spontaneous polarization of 484 pC m^-1. Furthermore, the moderate band gap equivalent to 1.63 eV of GeS provides it with significant potential to create a strong bulk photovoltage in the visible light range. However, the fabrication of chemically stable few-to-monolayer GeS has not been reported so far, owing to the strong interlayer force and high chemical reactivity of the surface. Herein we demonstrate a new method for fabricating high quality, air-stable, ultrathin GeS nanoflakes. The electrical characterization confirms the formation of few-layered GeS with a remarkable in-plane ferroelectric hysteresis, which is forbidden by the inversion symmetry in bulk GeS crystals. After applying a coercive field of about 18.1 kV cm^-1, a switchable shift current can also be observed in the polarized GeS nanoflakes under light irradiation. To further enhance the photoresponsivity, few-layered InSe was transferred onto the GeS nanoflakes to form van der Waals ferroelectric diodes. The interfacial perturbation breaking the inversion symmetry results in the enhancement of robust dipoles in the GeS side along the interface, which can be tuned by the in-plane electric field. Overall, this work opens the door for exploring the low-dimensional ferroelectric memory and energy conversion applications based on 2D GeS nanoflakes and provides a deeper understanding of the photovoltaic mechanism with in-plane 2D ferroelectric diodes.

Bulk Photovoltaic Effect Driven by Collective Excitations in a Correlated Insulator

We investigate the bulk photovoltaic effect, which rectifies light into electric current, in a collective quantum state with correlation driven electronic ferroelectricity. We show via explicit real-time dynamical calculations that the effect of the applied electric field on the electronic order parameter leads to a strong enhancement of the bulk photovoltaic effect relative to the values obtained in a conventional insulator. The enhancements include both resonant enhancements at sub-band-gap frequencies, arising from excitation of optically active collective modes, and broadband enhancements arising from nonresonant deformations of the electronic order. The deformable electronic order parameter produces an injection current contribution to the bulk photovoltaic effect that is entirely absent in a rigid-band approximation to a time-reversal symmetric material. Our findings establish that correlation effects can lead to the bulk photovoltaic effect and demonstrate that the collective behavior of ordered states can yield large nonlinear optical responses.

Rabi Regime of Current Rectification in Solids

We investigate rectified currents in response to oscillating electric fields in systems lacking inversion and time-reversal symmetries. These currents, in second-order perturbation theory, are inversely proportional to the relaxation rate, and, therefore, naively diverge in the ideal clean limit. Employing a combination of the nonequilibrium Green function technique and Floquet theory, we show that this is an artifact of perturbation theory, and that there is a well-defined periodic steady state akin to Rabi oscillations leading to finite rectified currents in the limit of weak coupling to a thermal bath. In this Rabi regime the rectified current scales as the square root of the radiation intensity, in contrast with the linear scaling of the perturbative regime, allowing us to readily diagnose it in experiments. More generally, our description provides a smooth interpolation from the ideal periodic Gibbs ensemble describing the Rabi oscillations of a closed system to the perturbative regime of rapid relaxation due to strong coupling to a thermal bath.

Oxygen Vacancies Nucleate Charged Domain Walls in Ferroelectrics

We study the influence of oxygen vacancies on the formation of charged 180° domain walls in ferroelectric BaTiO_{3} using first principles calculations. We show that it is favorable for vacancies to assemble in crystallographic planes, and that such clustering is accompanied by the formation of a charged domain wall. The domain wall has negative bound charge, which compensates the nominal positive charge of the vacancies and leads to a vanishing density of free charge at the wall. This is in contrast to the positively charged domain walls, which are nearly completely compensated by free charge from the bulk. The results thus explain the experimentally observed difference in electronic conductivity of the two types of domain walls, as well as the generic prevalence of charged domain walls in ferroelectrics. Moreover, the explicit demonstration of vacancy driven domain wall formation implies that specific charged domain wall configurations may be realized by bottom-up design for use in domain wall based information processing.

Intrinsic ferroelectricity and large bulk photovoltaic effect in novel two-dimensional buckled honeycomb-like lattice of NbP: first-principles study

Using first-principles calculations, we predict that the two-dimensional (2D) monolayers of NbP with the buckled honeycomb-like and puckered tetragonal structure can be obtained from the (110) and (001) orientations, respectively, of its bulk crystal structure. The electronic properties of these monolayers are spectacularly different as tetragonal lattice is metallic whereas the honeycomb-like lattice (h-NbP) is a semiconductor and exhibits intrinsic ferroelectricity originating from a raresd²-sp²hybridization. The shift current bulk photovoltaic effect (BPVE) is systematically investigated in the h-NbP monolayer (1.21 Å thickness) using the Wannier interpolation method. Strong absorption of visible light at ∼2 eV and a large 3D shift current of ∼180μA V^-2is obtained which is attributed to the partial delocalization of Bloch states due tosd²-sp²hybridization. We compare the shift current response of h-NbP monolayer with that of some previously reported bulk ferroelectrics and 2D monolayers, suggesting that h-NbP monolayer can yield a large shift current at an ultimate thickness and is a promising 2D material for the BPVE application under the visible light. Strain effect is also investigated, revealing that the h-NbP monolayer is dynamically stable up to a strain limit of ±3%, and the shift current increases by ∼9% at a compressive strain of -3% as the Bloch states are more delocalized due to the strengthening ofsd²-sp²hybridization. The results presented in this study can pave the paths to fabricate the 2D monolayered structures of NbP, and realize the BPVE based next-generation solar cells of h-NbP monolayer.

Giant exciton-enhanced shift currents and direct current conduction with subbandgap photo excitations produced by many-electron interactions

Shift current is a direct current generated from nonlinear light-matter interaction in a noncentrosymmetric crystal and is considered a promising candidate for next-generation photovoltaic devices. The mechanism for shift currents in real materials is, however, still not well understood, especially if electron-hole interactions are included. Here, we employ a first-principles interacting Green's-function approach on the Keldysh contour with real-time propagation to study photocurrents generated by nonlinear optical processes under continuous wave illumination in real materials. We demonstrate a strong direct current shift current at subbandgap excitation frequencies in monolayer GeS due to strongly bound excitons, as well as a giant excitonic enhancement in the shift current coefficients at above bandgap photon frequencies. Our results suggest that atomically thin two-dimensional materials may be promising building blocks for next-generation shift current devices.

Geometric Photon-Drag Effect and Nonlinear Shift Current in Centrosymmetric Crystals

The nonlinear shift current, also known as the bulk photovoltaic current generated by linearly polarized light, has long been known to be absent in crystals with inversion symmetry. Here we argue that a nonzero shift current in centrosymmetric crystals can be activated by a photon-drag effect. Photon-drag shift current proceeds from a "shift current dipole" (a geometric quantity characterizing interband transitions) and manifests a purely transverse response in centrosymmetric crystals. This transverse nature proceeds directly from the shift-vector's pseudovector nature under mirror operation and underscores its intrinsic geometric origin. Photon-drag shift current can be greatly enhanced by coupling to polaritons and provides a new and sensitive tool to interrogate the subtle interband coherences of materials with inversion symmetry previously thought to be inaccessible via photocurrent probes.

Two-Dimensional Materials with Giant Optical Nonlinearities near the Theoretical Upper Limit

Nonlinear optical (NLO) phenomena such as harmonic generation and Kerr and Pockels effects are of great technological importance for lasers, frequency converters, modulators, switches, etc. Recently, two-dimensional (2D) materials have drawn significant attention due to their strong and peculiar NLO properties. Here, we describe an efficient first-principles workflow for calculating the quadratic optical response and apply it to 375 non-centrosymmetric semiconductor monolayers from the Computational 2D Materials Database (C2DB). Sorting the nonresonant nonlinearities with respect to bandgap E_g reveals an upper limit proportional to E_g^-4, which is neatly explained by two distinct generic models. We identify multiple promising candidates with giant nonlinearities and bandgaps ranging from 0.4 to 5 eV, some of which approach the theoretical upper limit and greatly outperform known materials. Our comprehensive library of ab initio NLO spectra for all 375 monolayers is freely available via the C2DB Web site.

A van der Waals interface that creates in-plane polarization and a spontaneous photovoltaic effect

Van der Waals interfaces can be formed by layer stacking without regard to lattice constants or symmetries of individual building blocks. We engineered the symmetry of a van der Waals interface of tungsten selenide and black phosphorus and realized in-plane electronic polarization that led to the emergence of a spontaneous photovoltaic effect. Spontaneous photocurrent was observed along the polar direction and was absent in the direction perpendicular to it. The observed spontaneous photocurrent was explained by a quantum-mechanical shift current that reflects the geometrical and topological electronic nature of this emergent interface. The present results offer a simple guideline for symmetry engineering that is applicable to a variety of van der Waals interfaces.

Two-dimensional Weyl points and nodal lines in pentagonal materials and their optical response

Two-dimensional pentagonal structures based on the Cairo tiling are the basis of a family of layered materials with appealing physical properties. In this work we present a theoretical study of the symmetry-based electronic and optical properties of these pentagonal materials. We provide a complete classification of the space groups that support pentagonal structures for binary and ternary systems. By means of first-principles calculations, the electronic band structures and the local spin textures in momentum space are analyzed for four examples of these materials, namely, PdSeTe, PdSeS, InP₅ and GeBi₂, all of which are dynamically stable. Our results show that pentagonal structures can be realized in chiral and achiral lattices with Weyl nodes pinned at high-symmetry points and nodal lines along the Brillouin zone boundary; these degeneracies are protected by the combined action of crystalline and time-reversal symmetries. Additionally, we computed the linear and nonlinear optical features of the proposed pentagonal materials and discuss some particular features such as the shift current, which shows an enhancement due to the presence of nodal lines and points, and their possible applications.

Manipulating Weyl quasiparticles by orbital-selective photoexcitation in WTe2

Optical control of structural and electronic properties of Weyl semimetals allows development of switchable and dissipationless topological devices at the ultrafast scale. An unexpected orbital-selective photoexcitation in type-II Weyl material WTe2 is reported under linearly polarized light (LPL), inducing striking transitions among several topologically-distinct phases mediated by effective electron-phonon couplings. The symmetry features of atomic orbitals comprising the Weyl bands result in asymmetric electronic transitions near the Weyl points, and in turn a switchable interlayer shear motion with respect to linear light polarization, when a near-infrared laser pulse is applied. Consequently, not only annihilation of Weyl quasiparticle pairs, but also increasing separation of Weyl points can be achieved, complementing existing experimental observations. In this work, we provide a new perspective on manipulating the Weyl node singularity and coherent control of electron and lattice quantum dynamics simultaneously.

Significant second-harmonic generation and bulk photovoltaic effect in trigonal selenium and tellurium chains

One-dimensional (1D) selenium and tellurium crystalize in helical chainlike structures and thus exhibit fascinating properties. By performing first-principles calculations, we have researched the linear and nonlinear optical (NLO) properties of 1D Se and Te, and find that both systems exhibit pronounced NLO responses. In particular, 1D Se is found to possess a large second-harmonic generation coefficient with the χ value being up to 7 times larger than that of GaN, and is even several times larger than that of the bulk counterpart. On the other hand, 1D Te also produces significant NLO susceptibility χ which exceeds that of bulk GaN by 5 times. Furthermore, 1D Te is shown to possess a prominent linear electro-optic coefficient r_xxx(0). In particular, the Te chain exhibits a large shift current response and the maximum is twice as large as the maximal photovoltaic responses obtained from BaTiO₃. Therefore, 1D Se and Te may find potential applications in solar energy conversion, electro-optical switches, and so on. Finally, the much stronger NLO effects of 1D Se and Te are attributed to their one-dimensional structures with high anisotropy, strong covalent bonding and lone-pair electrons. These findings will contribute further to experimental studies and the search for excellent materials with large NLO effects.

Topological Quantum Materials from the Viewpoint of Chemistry

Topology, a mathematical concept, has recently become a popular and truly transdisciplinary topic encompassing condensed matter physics, solid state chemistry, and materials science. Since there is a direct connection between real space, namely atoms, valence electrons, bonds, and orbitals, and reciprocal space, namely bands and Fermi surfaces, via symmetry and topology, classifying topological materials within a single-particle picture is possible. Currently, most materials are classified as trivial insulators, semimetals, and metals or as topological insulators, Dirac and Weyl nodal-line semimetals, and topological metals. The key ingredients for topology are certain symmetries, the inert pair effect of the outer electrons leading to inversion of the conduction and valence bands, and spin-orbit coupling. This review presents the topological concepts related to solids from the viewpoint of a solid-state chemist, summarizes techniques for growing single crystals, and describes basic physical property measurement techniques to characterize topological materials beyond their structure and provide examples of such materials. Finally, a brief outlook on the impact of topology in other areas of chemistry is provided at the end of the article.

Theory of bulk photovoltaic effect in Anderson insulator

The localization of wavefunction by disorder makes a conductive material an insulator with vanishing conductivity at zero temperature. A similar outcome is expected for the photocurrent in semiconductor p-n junctions because the photoexcited carriers cannot drift through the device. In contrast, we here show numerically that the bulk photovoltaic effect-the photovoltaic effect in noncentrosymmetric bulk materials-occurs in a noncentrosymmetric, disordered, one-dimensional insulator where all eigenstates are localized. We find this photocurrent remains, even when the energy scale of random potential is larger than the bandwidth. On the other hand, the photocurrent decays exponentially when the excitation is local, i.e., when only a part of the device is illuminated. The photocurrent also vanishes if the relaxation occurs only by contact with the electrodes. Our result implies that the ratio of the photovoltaic current and the direct current by the variable-range hopping increases with decreasing temperature. These results suggest a route to design high-efficiency solar cells and photodetectors.

Nonvanishing Subgap Photocurrent as a Probe of Lifetime Effects

For semiconductors and insulators, it is commonly believed that in-gap transitions into nonlocalized states are smoothly suppressed in the clean limit; i.e., at zero temperature, their contribution vanishes due to the unavailability of states. We present a novel type of subgap response which shows that this intuition does not generalize beyond linear response. Namely, we find that the dc current due to the bulk photovoltaic effect can be finite and mostly temperature independent in an allowed window of subgap transitions. We expect that a moderate range of excitation energies lies between the bulk energy gap and the mobility edge where this effect is observable. Using a simplified relaxation time model for the band broadening, we find the subgap dc current to be temperature independent for noninteracting systems but temperature dependent for strongly interacting systems. Thus, the subgap response may be used to distinguish whether a state is single-particle localized or many-body localized.

Recent Advances in 2D Metal Monochalcogenides

The family of emerging low-symmetry and structural in-plane anisotropic two-dimensional (2D) materials has been expanding rapidly in recent years. As an important emerging anisotropic 2D material, the black phosphorene analog group IVA-VI metal monochalcogenides (MMCs) have been surged recently due to their distinctive crystalline symmetries, exotic in-plane anisotropic electronic and optical response, earth abundance, and environmentally friendly characteristics. In this article, the recent research advancements in the field of anisotropic 2D MMCs are reviewed. At first, the unique wavy crystal structures together with the optical and electronic properties of such materials are discussed. The Review continues with the various methods adopted for the synthesis of layered MMCs including micromechanical and liquid phase exfoliation as well as physical vapor deposition. The last part of the article focuses on the application of the structural anisotropic response of 2D MMCs in field effect transistors, photovoltaic cells nonlinear optics, and valleytronic devices. Besides presenting the significant research in the field of this emerging class of 2D materials, this Review also delineates the existing limitations and discusses emerging possibilities and future prospects.

Liquid-Phase Exfoliated GeSe Nanoflakes for Photoelectrochemical-Type Photodetectors and Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) systems represent powerful tools to convert electromagnetic radiation into chemical fuels and electricity. In this context, two-dimensional (2D) materials are attracting enormous interest as potential advanced photo(electro)catalysts and, recently, 2D group-IVA metal monochalcogenides have been theoretically predicted to be water splitting photocatalysts. In this work, we use density functional theory calculations to theoretically investigate the photocatalytic activity of single-/few-layer GeSe nanoflakes for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in pH conditions ranging from 0 to 14. Our simulations show that GeSe nanoflakes with different thickness can be mixed in the form of nanoporous films to act as nanoscale tandem systems, in which the flakes, depending on their thickness, can operate as HER- and/or OER photocatalysts. On the basis of theoretical predictions, we report the first experimental characterization of the photo(electro)catalytic activity of single-/few-layer GeSe flakes in different aqueous media, ranging from acidic to alkaline solutions: 0.5 M H2SO4 (pH 0.3), 1 M KCl (pH 6.5), and 1 M KOH (pH 14). The films of the GeSe nanoflakes are fabricated by spray coating GeSe nanoflakes dispersion in 2-propanol obtained through liquid-phase exfoliation of synthesized orthorhombic (Pnma) GeSe bulk crystals. The PEC properties of the GeSe nanoflakes are used to design PEC-type photodetectors, reaching a responsivity of up to 0.32 AW-1 (external quantum efficiency of 86.3%) under 455 nm excitation wavelength in acidic electrolyte. The obtained performances are superior to those of several self-powered and low-voltage solution-processed photodetectors, approaching that of self-powered commercial UV-Vis photodetectors. The obtained results inspire the use of 2D GeSe in proof-of-concept water photoelectrolysis cells.

Microscopic Manipulation of Ferroelectric Domains in SnSe Monolayers at Room Temperature

Two-dimensional (2D) van der Waals ferroelectrics provide an unprecedented architectural freedom for the creation of artificial multiferroics and nonvolatile electronic devices based on vertical and coplanar heterojunctions of 2D ferroic materials. Nevertheless, controlled microscopic manipulation of ferroelectric domains is still rare in monolayer-thick 2D ferroelectrics with in-plane polarization. Here we report the discovery of robust ferroelectricity with a critical temperature close to 400 K in SnSe monolayer plates grown on graphene and the demonstration of controlled room-temperature ferroelectric domain manipulation by applying appropriate bias voltage pulses to the tip of a scanning tunneling microscope (STM). This study shows that STM is a powerful tool for detecting and manipulating the microscopic domain structures in 2D ferroelectric monolayers, which are difficult for conventional approaches such as piezoresponse force microscopy, thus facilitating the hunt for other 2D ferroelectric monolayers with in-plane polarization with important technological applications.

Defect tolerant zero-bias topological photocurrent in a ferroelectric semiconductor

Lattice defect is a major cause of energy dissipation in conventional electric current due to the drift and diffusion motions of electrons. Different nature of current emerges when noncentrosymmetric materials are excited by light. This current, called the shift current, originates from the change in the Berry connection of electrons' wave functions during the interband optical transition. Here, we demonstrate the defect tolerance of shift current using single crystals of ferroelectric semiconductor antimony sulfoiodide (SbSI). Although the dark conductance spreads over several orders of magnitude in each crystal due to the difference in the density of defect levels, the observed shift current converges to an identical value. We also reveal that the shift current is scarcely disturbed by the surface defects while they drastically suppress the conventional photocurrent. The defect tolerance is a manifestation of the topological nature of shift current, which will be a crucial advantage in optoelectronic applications.

Enhanced Shift Currents in Monolayer 2D GeS and SnS by Strain-Induced Band Gap Engineering

Group IV monochalcogenides exhibit spontaneous polarization and ferroelectricity, which are important in photovoltaic materials. Since strain engineering plays an important role in ferroelectricity, in the present work, the effect of equibiaxial strain on the band structure and shift currents in monolayer two-dimensional (2D) GeS and SnS has systematically been investigated using the first-principles calculations. The conduction bands of those materials are more responsive to strain than the valence bands. Increased equibiaxial compressive strain leads to a drastic reduction in the band gap and finally the occurrence of phase transition from semiconductor to metal at strains of -15 and -14% for GeS and SnS, respectively. On the other hand, tensile equibiaxial strain increases the band gap slightly. Similarly, increased equibiaxial compressive strain leads to a steady almost four times increase in the shift currents at a strain of -12% with direction change occurring at -8% strain. However, at phase transition from semiconductor to metal, the shift currents of the two materials completely vanish. Equibiaxial tensile strain also leads to increased shift currents. For SnS, shift currents do not change direction, just as the case of GeS at low strain; however, at a strain of +8% and beyond, direction reversal of shift currents beyond the band gap in GeS occur.