Large modulation of carrier transport by grain-boundary molecular packing and microstructure in organic thin films

Rational Design of Fluorinated 2D Polymer Film Based on Donor-Accepter Architecture toward Multilevel Memory Device for Neuromorphic Computing

Fluorine-containing 2D polymer (F-2DP) film is a desired system to regulate the charge transport in organic electronics but rather rarely reports due to the limited fluorine-containing building blocks and difficulties in synthesis. Herein, a novel polar molecule with antiparallel columnar stacking is synthesized and further embedded into an F-2DP system to control over the crystallinity of F-2DP film through self-complementary π-electronic forces. The donor-accepter-accepter'-donor' (D-A-A'-D') structure regulates the charge transportation efficiently, inducing multilevel memory behavior through stepwise charge capture and transfer processes. Thus, the device exhibits ternary memory behavior with low threshold voltage (Vth1 of 1.1 V, Vth2 of 2.0 V), clearly distinguishable resistance states (1:102:104) and ternary yield (83%). Furthermore, the stepwise formation of the charge complex endows the device with a wider range to regulate the conductive state, which allows its application in brain-inspired neuromorphic computing. Modified National Institute of Standards and Technology recognition can reach an accuracy of 86%, showing great potential in neuromorphic computing applications in the post-Moore era.

Using a Flexible Fountain Pen to Directly Write Organic Semiconductor Patterns with Crystallization Regulated by the Precursor Film

Organic semiconductor (OSC) films fabricated by meniscus-guided coating (MGC) methods are suitable for cost-effective and flexible electronics. However, achieving crystalline thin films by MGC methods is still challenging because the nucleation and crystal growth processes are influenced by the intertwined interactions among solvent evaporation, stochastic nucleation, and the fluid flow instabilities. Herein, a novel flexible fountain pen with active ink supply is designed and used to print OSCs. This direct-write method allows the flexible pen tip to contact the substrate, maintaining a robust meniscus by eliminating the gap found in conventional MGCs. An in situ optical microscopy observation system shows that the precursor film plays a critical role on the crystallization and the formation of coffee rings and dendrites. The computational fluid dynamics simulations demonstrate that the microstructure of the pen promotes extensional flows, facilitating mass transport and crystal alignment. Highly-aligned ribbon-shaped crystals of a small organic molecule (TIPS-pentacene), as well as a semiconducting polymer (N2200) with highly-ordered orientations, have been successfully printed by the flexible fountain pen. Organic field-effect transistors based on the flexible pen printed OSCs exhibit high performances and strong anisotropic mobility. In addition, the flexible fountain pen is expandable for printing multiple lines or large-area films.

Self-Assembly of Delta-Formamidinium Lead Iodide Nanoparticles to Nanorods: Study of Memristor Properties and Resistive Switching Mechanism

In the quest for advanced memristor technologies, this study introduces the synthesis of delta-formamidinium lead iodide (δ-FAPbI3) nanoparticles (NPs) and their self-assembly into nanorods (NRs). The formation of these NRs is facilitated by iodide vacancies, promoting the fusion of individual NPs at higher concentrations. Notably, these NRs exhibit robust stability under ambient conditions, a distinctive advantage attributed to the presence of capping ligands and a crystal lattice structured around face-sharing octahedra. When employed as the active layer in resistive random-access memory devices, these NRs demonstrate exceptional bipolar switching properties. A remarkable on/off ratio (105) is achieved, surpassing the performances of previously reported low-dimensional perovskite derivatives and α-FAPbI3 NP-based devices. This enhanced performance is attributed to the low off-state current owing to the reduced number of halide vacancies, intrinsic low dimensionality, and the parallel alignment of NRs on the FTO substrate. This study not only provides significant insights into the development of superior materials for memristor applications but also opens new avenues for exploring low-dimensional perovskite derivatives in advanced electronic devices.

Molecular Electronics: From Nanostructure Assembly to Device Integration

Integrated electronics and optoelectronics based on organic semiconductors have attracted considerable interest in displays, photovoltaics, and biosensing owing to their designable electronic properties, solution processability, and flexibility. Miniaturization and integration of devices are growing trends in molecular electronics and optoelectronics for practical applications, which requires large-scale and versatile assembly strategies for patterning organic micro/nano-structures with simultaneously long-range order, pure orientation, and high resolution. Although various integration methods have been developed in past decades, molecular electronics still needs a versatile platform to avoid defects and disorders due to weak intermolecular interactions in organic materials. In this perspective, a roadmap of organic integration technologies in recent three decades is provided to review the history of molecular electronics. First, we highlight the importance of long-range-ordered molecular packing for achieving exotic electronic and photophysical properties. Second, we classify the strategies for large-scale integration of molecular electronics through the control of nucleation and crystallographic orientation, and evaluate them based on factors of resolution, crystallinity, orientation, scalability, and versatility. Third, we discuss the multifunctional devices and integrated circuits based on organic field-effect transistors (OFETs) and photodetectors. Finally, we explore future research directions and outlines the need for further development of molecular electronics, including assembly of doped organic semiconductors and heterostructures, biological interfaces in molecular electronics and integrated organic logics based on complementary FETs.

Asymmetrically Functionalized Electron-Deficient π-Conjugated System for Printed Single-Crystalline Organic Electronics

Large-area single-crystalline thin films of n-type organic semiconductors (OSCs) fabricated via solution-processed techniques are urgently demanded for high-end electronics. However, the lack of molecular designs that concomitantly offer excellent charge-carrier transport, solution-processability, and chemical/thermal robustness for n-type OSCs limits the understanding of fundamental charge-transport properties and impedes the realization of large-area electronics. The benzo[de]isoquinolino[1,8-gh]quinolinetetracarboxylic diimide (BQQDI) π-electron system with phenethyl substituents (PhC2 -BQQDI) demonstrates high electron mobility and robustness but its strong aggregation results in unsatisfactory solubility and solution-processability. In this work, an asymmetric molecular design approach is reported that harnesses the favorable charge transport of PhC2 -BQQDI, while introducing alkyl chains to improve the solubility and solution-processability. An effective synthetic strategy is developed to obtain the target asymmetric BQQDI (PhC2 -BQQDI-Cn ). Interestingly, linear alkyl chains of PhC2 -BQQDI-Cn (n = 5-7) exhibit an unusual molecular mimicry geometry with a gauche conformation and resilience to dynamic disorders. Asymmetric PhC2 -BQQDI-C5 demonstrates excellent electron mobility and centimeter-scale continuous single-crystalline thin films, which are two orders of magnitude larger than that of PhC2 -BQQDI, allowing for the investigation of electron transport anisotropy and applicable electronics.

Directional Crystallization of Conjugated Molecules during Coating Processes

The coating of organic molecules from the solution phase can result in directional crystal growth under certain conditions, even on a smooth isotropic surface and without the need of any kind of graphoexpitaxial preparation of the substrate. Based on reviewing the results from a variety of coating techniques and coating parameters, we identified that it is crucial for the coating speed to match the growth speed of the fastest growing crystal plane to achieve a high degree of directional crystallization.

Machine learning based charge mobility prediction for organic semiconductors

Transfer integral is a crucial parameter that determines the charge mobility of organic semiconductors, and it is very sensitive to molecular packing motifs. The quantum chemical calculation of transfer integrals for all the molecular pairs in organic materials is usually an unaffordable task; fortunately, it can be accelerated by the data-driven machine learning method now. In this work, we develop machine learning models based on artificial neutral networks to predict transfer integrals accurately and efficiently for four typical organic semiconductor molecules: quadruple thiophene (QT), pentacene, rubrene, and dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT). We test various forms of features and labels and evaluate the accuracy of different models. With the implementation of a data augmentation scheme, we have achieved a very high accuracy with the determination coefficient of 0.97 and mean absolute error of 4.5 meV for QT, and similar accuracy for the other three molecules. We apply these models to studying charge transport in organic crystals with dynamic disorders at 300 K and obtain the charge mobility and anisotropy in perfect agreement with the brutal force quantum chemical calculation. If more molecular packings representing the amorphous phase of organic solids are supplemented to the dataset, the current models can be refined to study charge transport in organic thin films with polymorphs and static disorders.

Packing-induced selectivity switching in molecular nanoparticle photocatalysts for hydrogen and hydrogen peroxide production

Molecular packing controls optoelectronic properties in organic molecular nanomaterials. Here we report a donor-acceptor organic molecule (2,6-bis(4-cyanophenyl)-4-(9-phenyl-9H-carbazol-3-yl)pyridine-3,5-dicarbonitrile) that exhibits two aggregate states in aqueous dispersions: amorphous nanospheres and ordered nanofibres with π-π molecular stacking. The nanofibres promote sacrificial photocatalytic H₂ production (31.85 mmol g^-1 h^-1) while the nanospheres produce hydrogen peroxide (H₂O₂) (3.20 mmol g^-1 h^-1 in the presence of O₂). This is the first example of an organic photocatalyst that can be directed to produce these two different solar fuels simply by changing the molecular packing. These different packings affect energy band levels, the extent of excited state delocalization, the excited state dynamics, charge transfer to O₂ and the light absorption profile. We use a combination of structural and photophysical measurements to understand how this influences photocatalytic selectivity. This illustrates the potential to achieve multiple photocatalytic functionalities with a single organic molecule by engineering nanomorphology and solid-state packing.

Fullerene-Liquid-Crystal-Induced Micrometer-Scale Charge-Carrier Diffusion in Organic Bulk Heterojunction

The short charge-carrier diffusion length (L_D ) (100-300 nm) in organic bulk heterojunction (BHJ) impedes the further improvement in power conversion efficiency (PCE) of organic solar cells (OSCs), especially for thick-film (>400 nm) devices matching with industrial solution processing. Here a facile method is developed to efficiently increase L_D and then improve PCEs of OSCs via introducing a fullerene liquid crystal, F1, into the active layer. F1 combines the inherent high electron mobility of fullerene and strong self-assembly capacity of liquid crystal, providing a fast channel for charge-carrier transport and reducing energetic disorder and trap density in BHJ film via enhancing crystallization. Typically, in PM6:Y6:F1 BHJ, the enhanced charge-carrier mobility (>10^-2 cm^-2 V^-1 s^-1 ) and prolonged charge-carrier lifetime (55.3 µs) are acquired to realize the record L_D of 1.6 or 2.4 µm for electron or hole, respectively, which are much higher than those of the PM6:Y6 binary sample and comparable to or even better than those values reported for some inorganic/hybrid materials, such as CuIn_x Ga_{(1- x )} Se₂ (CIGS) and perovskite thin films. Benefitting from the micrometer-scale L_D , the PM6:Y6:F1 ternary OSCs sustain a remarkable PCE of 15.23% with the active layer thickness approaching 500 nm.

Organic Phase-Change Memory Transistor Based on an Organic Semiconductor with Reversible Molecular Conformation Transition

Phase-change semiconductor is one of the best candidates for designing nonvolatile memory, but it has never been realized in organic semiconductors until now. Here, a phase-changeable and high-mobility organic semiconductor (3,6-DATT) is first synthesized. Benefiting from the introduction of electrostatic hydrogen bond (S···H), the molecular conformation of 3,6-DATT crystals can be reversibly modulated by the electric field and ultraviolet irradiation. Through experimental and theoretical verification, the tiny difference in molecular conformation leads to crystalline polymorphisms and dramatically distinct charge transport properties, based on which a high-performance organic phase-change memory transistor (OPCMT) is constructed. The OPCMT exhibits a quick programming/erasing rate (about 3 s), long retention time (more than 2 h), and large memory window (i.e., large threshold voltage shift over 30 V). This work presents a new molecule design concept for organic semiconductors with reversible molecular conformation transition and opens a novel avenue for memory devices and other functional applications.

Reducing Trap Density in Organic Solar Cells via Extending the Fused Ring Donor Unit of an A-D-A-Type Nonfullerene Acceptor for Over 17% Efficiency

The high trap density (generally 10¹⁶ to 10¹⁸  cm^-3 ) in thin films of organic semiconductors is the primary reason for the inferior charge-carrier mobility and large nonradiative recombination energy loss (ΔE_nr ) in organic solar cells (OSCs), limiting improvement in power conversion efficiencies (PCEs). In this study, the trap density in OSCs is efficiently reduced via extending the donor core of nonfullerene acceptors (NFAs) from a heptacyclic unit to a nonacyclic unit. TTPIC-4F with a nonacyclic unit has stronger intramolecular and intermolecular interactions, affording higher crystallinity in thin films relative to its counterpart BTPIC-4F. Thus, the D18:TTPIC-4F-based device achieves a lower trap density of 4.02 × 10¹⁵  cm^-3 , comparable to some typical high-performance inorganic/hybrid semiconductors, with higher mobility and inhibited charge-carrier recombination in devices. Therefore, the D18:TTPIC-4F-based OSC exhibits an impressive PCE of 17.1% with a low ΔE_nr of 0.208 eV, which is the best known value for A-D-A-type NFAs. Therefore, extending the donor core of NFAs is an efficient method for suppressing trap states in OSCs for high PCEs.

Two-Step Synthesis, Structure, and Optical Features of a Double Hetero[7]helicene

A novel double aza-oxa[7]helicene was synthesized from the commercially available N1,N4-di(naphthalen-2-yl)benzene-1,4-diamine and p-benzoquinone in two steps. Combining the acid-mediated annulation with the electrochemical sequential reaction (oxidative coupling and dehydrative cyclization) afforded this double hetero[7]helicene. Moreover, the structural and optical features of this molecule have been studied using X-ray crystallographic analysis, and the absorption and emission behaviors were rationalized based on DFT calculations.

Self-Assembling Behaviour of Perylene, Perylene Diimide, and Thionated Perylene Diimide Deciphered through Non-Covalent Interactions

The π-conjugated supramolecular polymers (SMP) have gained vast popularity in materials chemistry and biomedicine due to their spectacular self-assembling behaviour. A detailed account of the electronic structure and bonding through quantum theory of atoms-in-molecules, non-covalent interactions, and energy decomposition analysis (EDA) in the oligomers of perylene, perylene diimide (PDI), and thionated-PDI (t-PDI) is presented. The oligomers of all three molecules show a slip angle of θ≈62° thus forming H-aggregates. The stacking pattern in perylene oligomers prefers a slip-stacked brick-layer order, while the bulkier PDI and t-PDI prefer a parallel step-wise pattern in their oligomers. Successive addition of monomers leads to a consequent rise in the association energy, although to a much greater extent in PDI and t-PDI than in perylene. While the major contribution to this association energy comes from the dispersion interactions in all three systems, the steric interactions in t-PDI quench the cooperativity in its SMP formation. A detailed analysis of the non-covalent interactions reveals the presence of π-π, π-hole⋅⋅⋅O=C, and π-hole⋅⋅⋅S=C electrostatic interactions playing a crucial role in the self-assembly process, which can be further implemented on developing force field-based methods for understanding the self-assembling mechanism in higher degree of oligomers.

Recent Advances in Realizing Highly Aligned Organic Semiconductors by Solution-Processing Approaches

Solution-processing approaches are widely used for controlling the aggregation structure of organic semiconductors because they are fast, efficient, and have strong practicability. Effective regulation of the aggregation structure of molecules to achieve highly ordered molecular stacking is key to realizing effective carrier transport and high-performance devices. Numerous studies have achieved highly aligned organic semiconductors using different solution-processing approaches. This article provides a detailed review of the prevalent solution-processing technologies and emerging methods developed over the past few years for the alignment of organic semiconducting materials. These technologies and methods are classified according to the processing principle. This review focuses on the principles of different experimental techniques, improvements upon the conventional methods, and state-of-the-art performance of resulting devices. In addition, a brief discussion of the characteristics and development prospects of various methods is presented.

Microstructural Control of Soluble Acene Crystals for Field-Effect Transistor Gas Sensors

Microstructural control during the solution processing of small-molecule semiconductors (namely, soluble acene) is important for enhancing the performance of field-effect transistors (FET) and sensors. This focused review introduces strategies to enhance the gas-sensing properties (sensitivity, recovery, selectivity, and stability) of soluble acene FET sensors by considering their sensing mechanism. Defects, such as grain boundaries and crystal edges, provide diffusion pathways for target gas molecules to reach the semiconductor-dielectric interface, thereby enhancing sensitivity and recovery. Representative studies on grain boundary engineering, patterning, and pore generation in the formation of soluble acene crystals are reviewed. The phase separation and microstructure of soluble acene/polymer blends for enhancing gas-sensing performance are also reviewed. Finally, flexible gas sensors using soluble acenes and soluble acene/polymer blends are introduced, and future research perspectives in this field are suggested.

Understanding, quantifying, and controlling the molecular ordering of semiconducting polymers: from novices to experts and amorphous to perfect crystals

Molecular packing and texture of semiconducting polymers are often critical to the performance of devices using these materials. Although frameworks exist to quantify the ordering, interpretations are often just qualitative, resulting in imprecise use of terminology. Here, we reemphasize the significance of quantifying molecular ordering in terms of degree of crystallinity (volume fractions that are ordered) and quality of ordering and their relation to the size scale of an ordered region. We are motivated in part by our own imprecise and inconsistent use of terminology in the past, as well as the need to have a primer or tutorial reference to teach new group members. We strive to develop and use consistent terminology with regards to crystallinity, semicrystallinity, paracrystallinity, and related characteristics. To account for vastly different quality of ordering along different directions, we classify paracrystals into 2D and 3D paracrystals and use paracrystallite to describe the spatial extent of molecular ordering in 1-10 nm. We show that a deeper understanding of molecular ordering can be achieved by combining grazing-incidence wide-angle X-ray scattering and differential scanning calorimetry, even though not all aspects of these measurements are consistent, and some classification appears to be method dependent. We classify a broad range of representative polymers under common processing conditions into five categories based on the quantitative analysis of the paracrystalline disorder parameter (g) and thermal transitions. A small database is presented for 13 representative conjugated and insulating polymers ranging from amorphous to semi-paracrystalline. Finally, we outline the challenges to rationally design more perfect polymer crystals and propose a new molecular design approach that envisions conceptual molecular grafting that is akin to strained and unstrained hetero-epitaxy in classic (compound) semiconductors thin film growth.

Grazing-incidence X-ray diffraction tomography for characterizing organic thin films

Characterization of thin films is of paramount importance for evaluating material processing outcomes/efficiency as well as establishing structure-property/performance relationships. This article introduces grazing-incidence diffraction tomography (GID tomography), a technique that combines grazing-incidence X-ray scattering and computed tomography to quantitatively determine the dimension and orientation of crystalline domains in thin films without restrictions on the beam coherence, substrate type or film thickness. This computational method extends the capability of synchrotron beamlines by utilizing standard X-ray scattering experiment setups.

Mixed Ionic and Electronic Conduction in Small-Molecule Semiconductors

Small-molecule organic semiconductors have displayed remarkable electronic properties with a multitude of π-conjugated structures developed and fine-tuned over recent years to afford highly efficient hole- and electron-transporting materials. Already making a significant impact on organic electronic applications including organic field-effect transistors and solar cells, this class of materials is also now naturally being considered for the emerging field of organic bioelectronics. In efforts aimed at identifying and developing (semi)conducting materials for bioelectronic applications, particular attention has been placed on materials displaying mixed ionic and electronic conduction to interface efficiently with the inherently ionic biological world. Such mixed conductors are conveniently evaluated using an organic electrochemical transistor, which further presents itself as an ideal bioelectronic device for transducing biological signals into electrical signals. Here, we review recent literature relevant for the design of small-molecule mixed ionic and electronic conductors. We assess important classes of p- and n-type small-molecule semiconductors, consider structural modifications relevant for mixed conduction and for specific interactions with ionic species, and discuss the outlook of small-molecule semiconductors in the context of organic bioelectronics.

Gold nanorods doping induced performance improvement of room temperature OTFT NO2sensors

Solution-processed organic thin-film transistors (OTFTs) are regarded as the promising candidates for low-cost gas sensors due to their advantages of high throughput, large-area and sensitive to various gas analytes. Microstructure control of organic active layers in OTFTs is an effective route to improve the sensing performance. In this work, we report a simple method to modify the morphology of 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) thin films via doping gold nanorods (Au NRs) for enhancing the performance of the corresponding OTFT sensors for nitrogen dioxide (NO₂) detection. With the optimized doping ratio of Au nanorods, the TIPS-pentacene OTFT snesors not only exhibit a 3-fold increase in mobility, but also obtain a high sensitivity of 70% to 18 ppm NO₂with a detection limit of 270 ppb. The microstructures and morphologies of the modified TIPS-pentacene thin film characterized by atomic force microscopy and field scanning electron microscope. The experimental results indicate that the proper addition of Au NRs could effectively regulate the grain size of TIPS-pentacene, and therein control the density of grain boundaries during the crystallization, which is essential for the high-performance gas sensors.

Density of states in locally ordered amorphous organic semiconductors: Emergence of the exponential tails

We present a simple model of the local order in amorphous organic semiconductors, which naturally produces a spatially correlated exponential density of states (DOS). The dominant contribution to the random energy landscape is provided by electrostatic contributions from dipoles or quadrupoles. An assumption of the preferable parallel orientation of neighbor quadrupoles or antiparallel orientation of dipoles directly leads to the formation of the exponential tails of the DOS even for a moderate size of the ordered domains. The insensitivity of the exponential tail formation to the details of the microstructure of the material suggests that this mechanism is rather common in amorphous organic semiconductors.

Photocurrent in Metal-Halide Perovskite/Organic Semiconductor Heterostructures: Impact of Microstructure on Charge Generation Efficiency

Hybrid organic-inorganic metal-halide perovskites have emerged as versatile materials for enabling low-cost, mechanically flexible optoelectronic applications. The progress has been commendable; however, technological breakthroughs have outgrown the basic understanding of processes occurring in bulk and at device interfaces. Here, we investigated the photocurrent at perovskite/organic semiconductor interfaces in relation to the microstructure of electronically active layers. We found that the photocurrent response is significantly enhanced in the bilayer structure as a result of a more efficient dissociation of the photogenerated excitons and trions in the perovskite layer. The increase in the grain size within the organic semiconductor layer results in reduced trapping and further enhances the photocurrent by extending the photocarriers' lifetime. The photodetector responsivity and detectivity have improved by 1 order of magnitude in the optimized samples, reaching values of 6.1 ± 1.1 A W^-1, and 1.5 × 10¹¹ ± 4.7 × 10¹⁰ Jones, respectively, and the current-voltage hysteresis has been eliminated. Our results highlight the importance of fine-tuning film microstructure in reducing the loss processes in thin-film optoelectronics based on metal-halide semiconductors and provide a powerful interfacial design method to consistently achieve high-performance photodetectors.

Investigating a Combined Stochastic Nucleation and Molecular Dynamics-Based Equilibration Approach for Constructing Large-Scale Polycrystalline Films

The morphology of small-molecule organic semiconducting materials can vary from single crystals via polycrystalline films with varying grain sizes to amorphous structures, depending on the process conditions. This structural variety affects the electronic properties and, thus, the performance of organic electronic devices. A nucleation-equilibration approach is investigated, whose focus is on the construction of morphologies with controlled variations in the average grain size. Its computational requirements are low because nucleation is purely based on geometrical considerations, thus allowing the construction of model systems of experimentally relevant sizes. Its application is demonstrated for C₆₀ and pentacene by generating single-component films that vary from amorphous to crystalline structures. It is further generalized to two-component films and applied to C₆₀: pentacene blends as well as dilute n-doped C₆₀ structures. When combined with electronic structure calculations in the future, the nucleation-equilibration approach can offer insights into the impact of polycrystallinity on electronic and charge-transport properties in the absence of any knowledge about the growth mechanism and for a broad set of systems.

Water-Surface Drag Coating: A New Route Toward High-Quality Conjugated Small-Molecule Thin Films with Enhanced Charge Transport Properties

Electronic properties of organic semiconductor (OSC) thin films are largely determined by their morphologies and crystallinities. However, solution-processed conjugated small-molecule OSC thin films usually exhibit abundant grain boundaries and impure grain orientations because of complex fluid dynamics during solution coating. Here, a novel methodology, water-surface drag coating, is demonstrated to fabricate high-quality OSC thin films with greatly enhanced charge transport properties. This method utilizes the water surface to alter the evaporation dynamics of solution to enlarge the grain size, and a unique drag-coating process to achieve the unidirectional growth of organic crystals. Using 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (Dif-TES-ADT) as an example, thin films with millimeter-sized single-crystal domains and pure crystallographic orientations are achieved, revealing a significant enhancement (4.7 times) of carrier mobility. More importantly, the resulting film can be directly transferred onto any desired flexible substrates, and flexible transistors based on the Dif-TES-ADT thin films show a mobility as high as 16.1 cm² V^-1 s^-1 , which represents the highest mobility value for the flexible transistors reported thus far. The method is general for the growth of various high-quality OSC thin films, thus opening up opportunities for high-performance organic flexible electronics.

Charge Mobility in Discotic Liquid Crystals

Discotic (disk-shaped) molecules or molecular aggregates may form, within a certain temperature range, partially ordered phases, known as discotic liquid crystals, which have been extensively studied in the recent past. On the one hand, this interest was prompted by the fact that they represent models for testing energy and charge transport theories in organic materials. However, their long-range self-assembling properties, potential low cost, ease of processability with a variety of solvents and the relative ease of tailoring their properties via chemical synthesis, drove the attention of researchers also towards the exploitation of their semiconducting properties in organic electronic devices. This review covers recent research on the charge transport properties of discotic mesophases, starting with an introduction to their phase structure, followed by an overview of the models used to describe charge mobility in organic substances in general and in these systems in particular, and by the description of the techniques most commonly used to measure their charge mobility. The reader already familiar or not interested in such details can easily skip these sections and refer to the core section of this work, focusing on the most recent and significant results regarding charge mobility in discotic liquid crystals.

Semiaromatic polyamides with enhanced charge carrier mobility

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties.

Nanocluster-Based Ultralow-Temperature Driven Oxide Gate Dielectrics for High-Performance Organic Electronic Devices

The development of novel dielectric materials with reliable dielectric properties and low-temperature processibility is crucial to manufacturing flexible and high-performance organic thin-film transistors (OTFTs) for next-generation roll-to-roll organic electronics. Here, we investigate the solution-based fabrication of high-k aluminum oxide (Al₂O₃) thin films for high-performance OTFTs. Nanocluster-based Al₂O₃ films fabricated by highly energetic photochemical activation, which allows low-temperature processing, are compared to the conventional nitrate-based Al₂O₃ films. A wide array of spectroscopic and surface analyses show that ultralow-temperature photochemical activation (<60 °C) induces the decomposition of chemical impurities and causes the densification of the metal-oxide film, resulting in a highly dense high-k Al₂O₃ dielectric layer from Al-13 nanocluster-based solutions. The fabricated nanocluster-based Al₂O₃ films exhibit a low leakage current density (<10⁻⁷ A/cm²) at 2 MV/cm and high dielectric breakdown strength (>6 MV/cm). Using this dielectric layer, precisely aligned microrod-shaped 2,7-dioctyl[1]benzothieno [3,2-b][1] benzothiophene (C8-BTBT) single-crystal OTFTs were fabricated via solvent vapor annealing and photochemical patterning of the sacrificial layer.

Switching from Electron to Hole Transport in Solution-Processed Organic Blend Field-Effect Transistors

Organic electronics became an attractive alternative for practical applications in complementary logic circuits due to the unique features of organic semiconductors such as solution processability and ease of large-area manufacturing. Bulk heterojunctions (BHJ), consisting of a blend of two organic semiconductors of different electronic affinities, allow fabrication of a broad range of devices such as light-emitting transistors, light-emitting diodes, photovoltaics, photodetectors, ambipolar transistors and sensors. In this work, the charge carrier transport of BHJ films in field-effect transistors is switched from electron to hole domination upon processing and post-treatment. Low molecular weight n-type N,N'-bis(n-octyl)-(1,7&1,6)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDI8-CN₂) was blended with p-type poly[2,5-bis(3-tetradecylthiophene-2-yl)thieno[3,2-b]thiophene] (PBTTT-C₁₄) and deposited by spin-coating to form BHJ films. Systematic investigation of the role of rotation speed, solution temperature, and thermal annealing on thin film morphology was performed using atomic force microscopy, scanning electron microscopy, and grazing incidence wide-angle X-ray scattering. It has been determined that upon thermal annealing the BHJ morphology is modified from small interconnected PDI8-CN₂ crystals uniformly distributed in the polymer fraction to large planar PDI8-CN2 crystal domains on top of the blend film, leading to the switch from electron to hole transport in field-effect transistors.

In-Depth Investigation of the Correlation between Organic Semiconductor Orientation and Energy-Level Alignment Using In Situ Photoelectron Spectroscopy

Organic semiconductors (OSCs) are of interest for replacing traditional Si-based semiconductors as their flexibility and transparency enable new applications. The properties of OSC materials greatly depend on their orientation and molecular arrangement, which are strongly dependent on the underlying substrate material. Hence, in this study, in situ ultraviolet photoelectron spectroscopy (UPS) is used to elucidate the effect of the substrate on OSC orientation. Two types of OSCs, namely those with shape anisotropy (pentacene, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene, and dibenzothiopheno[6,5-b:6',5'-f]thieno[3,2-b]thiophene) and those with shape isotropy (N,N'-di(1-naphthyl)-N,N'-diphenyl-(1,1'-biphenyl)-4,4'-diamine, tris(4-carbazoyl-9-ylphenyl)amine, and [6,6]-phenyl C71 butyric acid methyl ester), are deposited on different electrode materials. The differences in the UPS spectra of these materials are observed directly. In general, the orientation of anisotropic OSC molecules significantly depends on the substrate properties, while that of the isotropic ones do not. All the anisotropic OSC molecules grown on poly(3,4-ethylenedioxythiophene)-polystyrenesulfonate (PEDOT:PSS) electrodes show a greater degree of molecular ordering than those grown on Au and multiwalled carbon nanotube/PEDOT:PSS electrodes. The molecular arrangements within the OSC/electrode structures are reflected in the energy-level shifts in the corresponding UPS spectra and hence in the electronic configurations. The results of this study should aid the design and synthesis of OSC materials with configurations suitable for organic electronic devices.

Macroscopic quantum electrodynamics and density functional theory approaches to dispersion interactions between fullerenes

The processing and material properties of commercial organic semiconductors, for e.g. fullerenes is largely controlled by their precise arrangements, specially intermolecular symmetries, distances and orientations, more specifically, molecular polarisabilities. These supramolecular parameters heavily influence their electronic structure, thereby determining molecular photophysics and therefore dictating their usability as n-type semiconductors. In this article we evaluate van der Waals potentials of a fullerene dimer model system using two approaches: (a) Density Functional Theory and, (b) Macroscopic Quantum Electrodynamics, which is particularly suited for describing long-range van der Waals interactions. Essentially, we determine and explain the model symmetry, distance and rotational dependencies on binding energies and spectral changes. The resultant spectral tuning is compared using both methods showing correspondence within the constraints placed by the different model assumptions. We envision that the application of macroscopic methods and structure/property relationships laid forward in this article will find use in fundamental supramolecular electronics.

Identifying Dense NiSe2 /CoSe2 Heterointerfaces Coupled with Surface High-Valence Bimetallic Sites for Synergistically Enhanced Oxygen Electrocatalysis

Constructing heterostructures with abundant interfaces is essential for integrating the multiple functionalities in single entities. Herein, the synthesis of NiSe₂ /CoSe₂ heterostructures with different interfacial densities via an innovative strategy of successive ion injection is reported. The resulting hybrid electrocatalyst with dense heterointerfaces exhibits superior electrocatalytic properties in an alkaline electrolyte, superior to other benchmarks and precious metal catalysts. Advanced synchrotron techniques, post structural characterizations, and density functional theory (DFT) simulations reveal that the introduction of atomic-level interfaces can lower the oxidation overpotential of bimetallic Ni and Co active sites (whereas Ni²⁺ can be more easily activated than Co²⁺ ) and induce the electronic interaction between the core selenides and surface in situ generated oxides/hydroxides, which play a critical role in synergistically reducing energetic barriers and accelerating reaction kinetics for catalyzing the oxygen evolution. Hence, the heterointerface structure facilitates the catalytic performance enhancement via increasing the intrinsic reactivity of metallic atoms and enhancing the synergistic effect between the inner selenides and surface oxidation species. This work not only complements the understanding on the origins of the activity of electrocatalysts based on metal selenides, but also sheds light on further surface and interfacial engineering of advanced hybrid materials.

Scalable Ultrahigh-Speed Fabrication of Uniform Polycrystalline Thin Films for Organic Transistors

The fabrication of organic semiconductor thin films by printing technologies is expected to enable the low-cost production of devices such as flexible display drivers, RF-ID tags, and various chemical/biological sensors. However, large-scale high-speed fabrication of uniform semiconductor thin films with adequate electrical properties for these devices remains a big challenge. Herein, we demonstrate an ultrafast and scalable fabrication of uniform polycrystalline thin films with 100% surface coverage using liquid crystalline semiconductors such as 2-phenyl-7-decyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) and 2.7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8), at a rate of 3 orders of magnitude higher than before, i.e., 40 mm/s (2.4 m/min) or more by dip-coating in the drainage regime. Organic transistors fabricated with polycrystalline thin films of Ph-BTBT-10 show average mobilities of 4.13 ± 0.75 cm²/(V s) in the bottom-gate-bottom-contact configuration and 10.90 ± 2.40 cm²/(V s) in the bottom-gate-top-contact configuration comparable to those of the devices prepared with single-crystalline thin films. More importantly, these films almost maintain the FET performance when the substrate size is extended up to 4 square inch. The present findings are available for other liquid crystalline semiconductors and bring us one step closer to the realization of printed electronics.

Effect of Core Oligomer Length on the Phase Behavior and Assembly of π-Conjugated Peptides

Biohybrid molecules are a versatile class of materials for controlling the assembly behavior and functional properties of electronically active organics. In this work, we study the effect of the size of the π-conjugated core on the assembly and phase behavior for a series of π-conjugated peptides consisting of oligothiophene cores of defined lengths flanked by sequence-defined peptides (OTX, where X = 4, 5, 6 is the number of thiophene core units). Interestingly, we find that π-conjugated peptides with relatively short OT4 cores assemble into ordered, high aspect ratio, one-dimensional (1D) structures, whereas π-conjugated peptides with longer OT5 and OT6 cores assemble into disordered structures or lower aspect ratio 1D structures depending on assembly conditions. Phase diagrams for assembled materials are experimentally determined as a function of ionic strength, pH, temperature, and peptide concentration, revealing the impact of molecular sequence and π-conjugated core length on assembled morphologies. Molecular dynamics (MD) simulations are further used to probe the origins of microscale differences in assembly that arise from subtle changes in molecular identity. Broadly, our work elucidates the mechanisms governing the assembly of π-conjugated peptides, which will aid in efficient materials processing for soft electronic applications. Overall, these results highlight the complex phase behavior of biohybrid materials, including the impact of molecular sequence on assembly behavior and morphology.

High performance p-channel and ambipolar OFETs based on imidazo[4,5-f]-1,10-phenanthroline-triarylamines

A series of phenanthroline functionalized triarylamines (TAA) has been designed and synthesised to evaluate their OFET characteristics. Solution processed OFET devices have exhibited p-channel/ambipolar behaviour with respect to the substituents, in particular methoxyphenyl substitution resulted with highest mobility (μ h) up to 1.1 cm2 V-1 s-1 with good I on/off (106) ratio. These compounds can be potentially utilized for the fabrication of electronic devices.

Air and temperature sensitivity of n-type polymer materials to meet and exceed the standard of N2200

N-type organic semiconductors are notoriously unstable in air, requiring the design of new materials that focuses on lowering their LUMO energy levels and enhancing their air stability in organic electronic devices such as organic thin-film transistors (OTFTs). Since the discovery of the notably air stable and high electron mobility polymer poly{[N,N'-bis (2-octyldodecyl)- naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,29-bisthiophene)} (N2200), it has become a popular n-type semiconductor, with numerous materials being designed to mimic its structure. Although N2200 itself is well-studied, many of these comparable materials have not been sufficiently characterized to compare their air stability to N2200. To further the development of air stable and high mobility n-type organic semiconductors, N2200 was studied in organic thin film transistors alongside three N2200-based analogues as well as a recently developed polymer based on a (3E,7E)-3,7-bis(2-oxoindolin-3-ylidene)benzo[1,2-b:4,5-b']difuran-2,6(3 H,7 H)-dione (IBDF) core. This IBDF polymer has demonstrated promising field-effect mobility and air stability in drop-cast OTFTs. While N2200 outperformed its analogues, the IBDF-based polymer displayed superior air and temperature stability compared to N2200. Overall, polymers with more heteroatoms displayed greater air stability. These findings will support the development of new air-stable materials, and further demonstrate the persistent need for the development of novel n-type semiconductors.

Roles of interfaces in the ideality of organic field-effect transistors

Organic field-effect transistors (OFETs) are fundamental building blocks for flexible and large-area electronics due to their superior solution-processability, flexibility and stretchability. OFETs with high ideality are essential to their practical applications. In reality, however, many OFETs still suffer from non-ideal behaviors, such as gate-dependent mobility, which thus hinders the extraction of their intrinsic performance. It is much desired to gain a comprehensive understanding of the origins of these non-idealities. OFETs are primarily interface-related devices, and hence their performance and ideality are highly dependent on the interface properties between each device component. This review will focus on the recent progress in investigating the non-ideal behaviors of OFETs. In particular, the roles of interfaces, including the organic semiconductor (OSC)/dielectric interface, OSC/electrode interface and OSC/atmosphere interface, in determining the ideality of OFETs are summarized. Viable approaches through interface optimization to improve the device ideality are also reviewed. Finally, an overview of the outstanding challenges as well as the future development directions for the construction of ideal OFETs is given.

Molecular Semiconductors for Logic Operations: Dead-End or Bright Future?

The field of organic electronics has been prolific in the last couple of years, leading to the design and synthesis of several molecular semiconductors presenting a mobility in excess of 10 cm² V^-1 s^-1 . However, it is also started to recently falter, as a result of doubtful mobility extractions and reduced industrial interest. This critical review addresses the community of chemists and materials scientists to share with it a critical analysis of the best performing molecular semiconductors and of the inherent charge transport physics that takes place in them. The goal is to inspire chemists and materials scientists and to give them hope that the field of molecular semiconductors for logic operations is not engaged into a dead end. To the contrary, it offers plenty of research opportunities in materials chemistry.

Interface Engineering in Organic Field-Effect Transistors: Principles, Applications, and Perspectives

Heterogeneous interfaces that are ubiquitous in optoelectronic devices play a key role in the device performance and have led to the prosperity of today's microelectronics. Interface engineering provides an effective and promising approach to enhancing the device performance of organic field-effect transistors (OFETs) and even developing new functions. In fact, researchers from different disciplines have devoted considerable attention to this concept, which has started to evolve from simple improvement of the device performance to sophisticated construction of novel functionalities, indicating great potential for further applications in broad areas ranging from integrated circuits and energy conversion to catalysis and chemical/biological sensors. In this review article, we provide a timely and comprehensive overview of current efficient approaches developed for building various delicate functional interfaces in OFETs, including interfaces within the semiconductor layers, semiconductor/electrode interfaces, semiconductor/dielectric interfaces, and semiconductor/environment interfaces. We also highlight the major contributions and new concepts of integrating molecular functionalities into electrical circuits, which have been neglected in most previous reviews. This review will provide a fundamental understanding of the interplay between the molecular structure, assembly, and emergent functions at the molecular level and consequently offer novel insights into designing a new generation of multifunctional integrated circuits and sensors toward practical applications.

Imaging material functionality through three-dimensional nanoscale tracking of energy flow

The ability of energy carriers to move between atoms and molecules underlies biochemical and material function. Understanding and controlling energy flow, however, requires observing it on ultrasmall and ultrafast spatio-temporal scales, where energetic and structural roadblocks dictate the fate of energy carriers. Here, we developed a non-invasive optical scheme that leverages non-resonant interferometric scattering to track tiny changes in material polarizability created by energy carriers. We thus map evolving energy carrier distributions in four dimensions of spacetime with few-nanometre lateral precision and directly correlate them with material morphology. We visualize exciton, charge and heat transport in polyacene, silicon and perovskite semiconductors and elucidate how disorder affects energy flow in three dimensions. For example, we show that morphological boundaries in polycrystalline metal halide perovskites possess lateral- and depth-dependent resistivities, blocking lateral transport for surface but not bulk carriers. We also reveal strategies for interpreting energy transport in disordered environments that will direct the design of defect-tolerant materials for the semiconductor industry of tomorrow.

Tailoring the growth and electronic structures of organic molecular thin films

In the rapidly developing electronics industry, it has become increasingly necessary to explore materials that are cheap, flexible and versatile which have led to significant research efforts towards organic molecular thin films. Organic molecules are unique compared to their inorganic atomic counterparts as their properties can be tuned drastically through chemical functionalization, offering versatility, though their extended shape and weak intermolecular interactions bring significant challenges to the control of both the growth and the electronic structures of molecular thin films. In this paper, we will review the self-assembly process and how to establish long-range ordered organic molecular thin films. We will also discuss how the electronic structures of thin films are impacted by the molecule's local electrostatic environment and its interaction with the substrate, within the context of controlling interfacial energy level alignment between organic semiconductors and electrodes in electronic devices.

Intrinsically distinct hole and electron transport in conjugated polymers controlled by intra and intermolecular interactions

It is still a matter of controversy whether the relative difference in hole and electron transport in solution-processed organic semiconductors is either due to intrinsic properties linked to chemical and solid-state structure or to extrinsic factors, as device architecture. We here isolate the intrinsic factors affecting either electron or hole transport within the same film microstructure of a model copolymer semiconductor. Relatively, holes predominantly bleach inter-chain interactions with H-type electronic coupling character, while electrons' relaxation more strongly involves intra-chain interactions with J-type character. Holes and electrons mobility correlates with the presence of a charge transfer state, while their ratio is a function of the relative content of intra- and inter-molecular interactions. Such fundamental observation, revealing the specific role of the ground-state intra- and inter-molecular coupling in selectively assisting charge transport, allows predicting a more favorable hole or electron transport already from screening the polymer film ground state optical properties.

Synthesis and gas sensing properties of WS2 nanocrystallites assembled hierarchical WS2 fibers by electrospinning

A gas sensor based on a hierarchical WS2 structure embedded with vertically aligned WS2 nanocrystallites was demonstrated. The three-dimensional (3D) hierarchical structure provides many edge sites of nanocrystallites and an extremely large gas contact volume, resulting in a high gas response. The decreased contact resistance between the 3D hierarchical WS2 fibers and sensor electrode resulted in improved NO2 response. We fabricated a one-dimensional (1D) conductive WS2 fiber using a two-step annealing process under sulfur flow (sulfurization). It delivers a continuous and conductive carrier path and lowers the potential barrier at the interface of the WS2 nanocrystallites (top) and electrospun WS2 fiber (bottom), resulting in an improved gas response. We developed 3D hierarchical WS2 fibers embedded with vertically aligned WS2 nanocrystallites to increase the gas adsorption site in comparison with that of 1D WS2 fibers without WS2 flakes. Vertically aligned WS2 nanocrystallites were formed after a two-step annealing treatment. Sensors based on the 3D hierarchical WS2 fibers embedded with WS2 flakes, showed higher response to NO2 gas in comparison to that of pure WS2 fibers without WS2 flakes.

Single crystal texture by directed molecular self-assembly along dual axes

Creating well-defined single-crystal textures in materials requires the biaxial alignment of all grains into desired orientations, which is challenging to achieve in soft materials. Here we report the formation of single crystals with rigorously controlled texture over macroscopic areas (>1 cm²) in a soft mesophase of a columnar discotic liquid crystal. We use two modes of directed self-assembly, physical confinement and magnetic fields, to achieve control of the orientations of the columnar axes and the hexagonal lattice along orthogonal directions. Field control of the lattice orientation emerges in a low-temperature phase of tilted discogens that breaks the field degeneracy around the columnar axis present in non-tilted states. Conversely, column orientation is controlled by physical confinement and the resulting imposition of homeotropic anchoring at bounding surfaces. These results extend our understanding of molecular organization in tilted systems and may enable the development of a range of new materials for distinct applications.