The meniscus-guided deposition of semiconducting polymers

Wimpled thin films via multiple motions of a bubble decorated with surface-active molecules

HYPOTHESIS

Thin liquid films play a crucial role in various systems and applications. Understanding the mechanisms that regulate their morphology is a scientific challenge with obvious implications for application optimization. Thin liquid films trapped between bubbles and air-liquid interface can show various configurations influenced by their deformation history and system characteristics.

EXPERIMENTS

The morphology of thin liquid films formed in the presence of surface-active molecules is here studied with interferometric techniques. Three different systems with varying interfacial properties are investigated to understand their influence on film morphology. Specific deformation histories are applied to the films to generate complex film structures.

FINDINGS

We achieve the creation of a rather stable wimple by implementing controlled bubble motions against the air-liquid interface. We provide a criterion for wimple formation based on lubrication theory. The long-term stability of the wimple is also investigated, and more complex multi-wimple structures are experimentally produced building upon the achieved wimple stability.

One-stop quantification of microplastics and nanoparticles based on meniscus self-assembly technology

Micro-nano plastics (MNPs) pollution is currently a hot topic of global concern. However, there is still a lack of reliable analytical methods for completely quantitative analysis of MNPs, especially nanoplastics. This study proposes meniscus self-assembly enrichment method, which deposits nanoplastics more uniformly in a specific area. The meniscus self-assembly method greatly overcomes the agglomeration or dispersion of nanoplastics caused by traditional enrichments, and facilitates particles counting. This study investigates the effect of key parameters (e.g. time and initial concentration) on meniscus self-assembly enrichment performance. Besides, due to the large size difference between MNPs, it leads to incomplete quantification analysis when MNPs are counted at the same scale. In response to this problem, this study proposes a one-stop method to count MNPs separately through filtering. The plastics (>1 μm) are collected on the filter paper, then plastics (<1 μm) in the filtrate are homogeneously enriched by meniscus self-assembly, and finally statistically counted by scanning electron microscopy (SEM). The migration of MNPs from take-out plastic containers are detected, with microplastics of 460.55 particles/mL and nanoplastics of 4196.61 particles/mL found. The method has the advantages of saving time and effort, economic efficiency and comprehensive statistics compared with the traditional method.

Toward Ultrathin: Advances in Solution-Processed Organic Semiconductor Transistors

In recent years, organic semiconductor (OSC) ultrathin films and their solution-processed organic field-effect transistors (OFETs) have garnered attention for their high flexibility, light weight, solution processability, and tunable optoelectronic properties. These features make them promising candidates for next-generation optoelectronic applications. An ultrathin film typically refers to a film thickness of less than 10 nm, i.e., several molecular layers, which poses challenges for OSC materials and solution-processed methods. In this paper, first we introduce the carrier-transport regulation mechanism under ultrathin limits. Second, we summarize various solution-processed techniques for OSC ultrathin films and elucidate advances in their OFETs performance, such as enhanced or maintained mobilities, improved switching ratios, reduced threshold voltages, and minimized contact resistance. The relationship between the ultrathin-film thickness, microstructure of various OSCs (small molecules and polymers), and device performance is discussed. Third, we explore the recent application of OSC ultrathin-film-based OFETs, such as gas sensors, biosensors, photodetectors, and ferroelectric OFETs (Fe-OFETs). Finally, the conclusion is drawn, and the challenges and prospects of ultrathin OSC transistors are presented. Nowadays, research on ultrathin films is still in its early stages; further experience in precise film deposition control is crucial to advancing research and broadening the scope of applications for OSC ultrathin devices.

Drop-Cast Hybrid Poly(styrene)-b-Poly(ethylene oxide) Metal Salt Films: Solvent Evaporation and Crystallinity-Dependent Evolution of Film Morphology

Morphology templates of solution-based diblock copolymer (DBC) films with loading metal salts are widely applied in photocatalysts, photovoltaics, and sensors due to their adjustable characteristics based on surface (de-)wetting and microphase separation. The present work investigates the morphologies of drop-cast hybrid films based on poly(styrene)-b-poly(ethylene oxide) (PS-b-PEO) and the metal salts titanium isopropoxide (TTIP) and zinc acetate dehydrate (ZAD) in comparison to the pure DBC. By utilizing scanning electron microscopy, grazing-incidence small- and wide-angle X-ray scattering, and differential scanning calorimetry, we find that the resulting film morphologies depend not only on the presence of metal salts but also on solvent evaporation and crystalline formation. At 20 °C, additional TTIP and ZAD in the polymer template cause the morphology to change from packed globular structures to separated wormlike structures attributed to the changed polymer environment. Furthermore, additional tetrahydrofuran causes irregular structures at the precursor film part and the overlapped wormlike structures to transition into close-packed globular structures at the cap film parts of the pure DBC. In contrast, at 50 °C, the globular structures transit to fingerprint patterns due to the thermal behavior of the crystallizable PEO blocks, and the metal salt additives suppress crystalline structure formation in the PEO domains.

Unveiling Strong Thin Film Confinement Effects on Semirigid Conjugated Polymers

Nanoconfinement has been recognized to induce significant changes in the physical properties of polymeric films when their thickness is less than 100 nm. Despite extensive research on the effect of nanoconfinement on nonconjugated polymers, studies focusing on the confinement effects on dynamics and associated electronic and mechanical properties for semiconductive and semirigid conjugated polymers remain limited. In this study, we conducted a comprehensive investigation into the nanoconfinement effects on both p- and n-type conjugated polymers having varying chain rigidity under different degrees of confinement. Using the flash differential scanning calorimetry technique, it was found that the increased molecular mobility with decreasing film thickness, as indicated by the depression of glass transition temperature (T g) from its bulk values, was directly proportional to chain rigidity. This relationship between chain rigidity and enhanced segmental mobility was further corroborated through molecular dynamics simulations. Thinner films exhibited a higher degree of crystallinity for all conjugated polymers, and a significant reduction of more than 50% in elastic modulus was observed for films with approximately 20 nm thickness compared to those of 105 nm thickness, particularly for highly rigid conjugated polymers. Interestingly, we found that the charge mobility remained independent of film thickness, with all samples demonstrating good charge mobility regardless of the different film thicknesses for devices measured here. Nanoconfined conjugated polymer thin films exhibited a combination of mechanical compliance and good charge carrier mobility properties, making them promising candidates for the next generation of flexible and portable organic electronics. From an engineering standpoint, confinement could be an effective strategy to tailor the dynamics and mechanical properties without significant loss of electronic property.

A Review of Conductive Hydrogel-Based Wearable Temperature Sensors

Conductive hydrogel has garnered significant attention as an emergent candidate for diverse wearable sensors, owing to its remarkable and tailorable properties such as flexibility, biocompatibility, and strong electrical conductivity. These attributes make it highly suitable for various wearable sensor applications (e.g., biophysical, bioelectrical, and biochemical sensors) that can monitor human health conditions and provide timely interventions. Among these applications, conductive hydrogel-based wearable temperature sensors are especially important for healthcare and disease surveillance. This review aims to provide a comprehensive overview of conductive hydrogel-based wearable temperature sensors. First, this work summarizes different types of conductive fillers-based hydrogel, highlighting their recent developments and advantages as wearable temperature sensors. Next, this work discusses the sensing characteristics of conductive hydrogel-based wearable temperature sensors, focusing on sensitivity, dynamic stability, stretchability, and signal output. Then, state-of-the-art applications are introduced, ranging from body temperature detection and wound temperature detection to disease monitoring. Finally, this work identifies the remaining challenges and prospects facing this field. By addressing these challenges with potential solutions, this review hopes to shed some light on future research and innovations in this promising field.

Pattern Formation in Evaporating Polymer Solutions-Interplay between Dewetting and Decomposition

Pattern formation during solution evaporation is common in several industrial settings and involves a complex interplay of multiple processes, including wetting/dewetting, diffusion, and rheological characteristics of the solution. Monitoring the emergence of patterns during evaporation under controlled conditions may allow deconvolution of different processes and, in turn, improve our understanding of this common yet complex phenomenon. Here, we probe the importance of initial conditions, defined by the solution concentration c 0, on the pattern formation in evaporating polymer solutions on the air-water interface. Intriguingly, the initial decrease in the lateral length scale (ξ), characterizing the patterns, takes an upturn at higher concentrations, revealing reentrant behavior. We employ a gradient dynamics model consisting of coupled evolution equations for the film height and the polymer fraction in the solution. Our simulations capture two different length scales revealing the reasons underlying the re-entrant behavior of ξ(c 0). While the long-range destabilizing interactions between suspension and water result in the dewetting of thin film solutions, the phase separation between the polymer and solvent occurs at shorter length scales. Our results demonstrate the importance of initial concentration on pattern formation and, thereby, on the resultant properties of thin polymer films.

Using a Flexible Fountain Pen to Directly Write Organic Semiconductor Patterns with Crystallization Regulated by the Precursor Film

Organic semiconductor (OSC) films fabricated by meniscus-guided coating (MGC) methods are suitable for cost-effective and flexible electronics. However, achieving crystalline thin films by MGC methods is still challenging because the nucleation and crystal growth processes are influenced by the intertwined interactions among solvent evaporation, stochastic nucleation, and the fluid flow instabilities. Herein, a novel flexible fountain pen with active ink supply is designed and used to print OSCs. This direct-write method allows the flexible pen tip to contact the substrate, maintaining a robust meniscus by eliminating the gap found in conventional MGCs. An in situ optical microscopy observation system shows that the precursor film plays a critical role on the crystallization and the formation of coffee rings and dendrites. The computational fluid dynamics simulations demonstrate that the microstructure of the pen promotes extensional flows, facilitating mass transport and crystal alignment. Highly-aligned ribbon-shaped crystals of a small organic molecule (TIPS-pentacene), as well as a semiconducting polymer (N2200) with highly-ordered orientations, have been successfully printed by the flexible fountain pen. Organic field-effect transistors based on the flexible pen printed OSCs exhibit high performances and strong anisotropic mobility. In addition, the flexible fountain pen is expandable for printing multiple lines or large-area films.

Highly Stretchable and Oriented Wafer-Scale Semiconductor Films for Organic Phototransistor Arrays

Stretchable organic phototransistor arrays have potential applications in artificial visual systems due to their capacity to perceive ultraweak light across a broad spectrum. Ensuring uniform mechanical and electrical performance of individual devices within these arrays requires semiconductor films with large-area scale, well-defined orientation, and stretchability. However, the progress of stretchable phototransistors is primarily impeded by their limited electrical properties and photodetection capabilities. Herein, wafer-scale and well-oriented semiconductor films were successfully prepared using a solution shearing process. The electrical properties and photodetection capabilities were optimized by improving the polymer chain alignment. Furthermore, a stretchable 10 × 10 transistor array with high device uniformity was fabricated, demonstrating excellent mechanical robustness and photosensitive imaging ability. These arrays based on highly stretchable and well-oriented wafer-scale semiconductor films have great application potential in the field of electronic eye and artificial visual systems.

Uniaxial-Oriented Chiral Perovskite for Flexible Full-Stokes Polarimeter

Full-Stokes polarization detection, with high integration and portability, offers an efficient path toward next-gen multi-information optoelectronic systems. Nevertheless, current techniques relying on optical filters create rigid and bulky configurations, limiting practicality. Here, a flexible, filter-less full-Stokes polarimeter featuring a uniaxial-oriented chiral perovskite film is first reported. It is found that, the strategic manipulation of the surfactant-mediated Marangoni effect during blade coating, is crucial for guiding an equilibrious mass transport to achieve oriented crystallization. Through this approach, the obtained uniaxial-oriented chiral perovskite films inherently possess anisotropy and chirality, and thereby with desired sensitivity to both linearly polarized light and circularly polarized light vectors. The uniaxial-oriented crystalline structure also improves photodetection, achieving a specific detectivity of 5.23 × 1013 Jones, surpassing non-oriented devices by 10×. The as-fabricated flexible polarimeters enable accurate capture of full-Stokes polarization without optical filters, exhibiting slight detection errors for the Stokes parameters: ΔS1 = 9.2%, ΔS2 = 8.6%, and ΔS3 = 6.5%, approaching the detection accuracy of optics-filter polarimeters. This proof of concept also demonstrates applications in matrix polarization imaging.

Nonhalogenated Solvent Processable and High-Density Photopatternable Polymer Semiconductors Enabled by Incorporating Hydroxyl Groups in the Side Chains

Polymer semiconductors hold tremendous potential for applications in flexible devices, which is however hindered by the fact that they are usually processed by halogenated solvents rather than environmentally more friendly solvents. An effective strategy to boost the solubility of high-performance polymer semiconductors in nonhalogenated solvents such as tetrahydrofuran (THF) by appending hydroxyl groups in the side chains is herein presented. The results show that hydroxyl groups, which can be easily incorporated into the side chains, can significantly improve the solubility of typical p- and n-types as well as ambipolar polymer semiconductors in THF. Meanwhile, the thin films of these polymer semiconductors from the respective THF solutions show high charge mobilities. With THF as the processing and developing solvents these polymer semiconductors with hydroxyl groups in the side chains can be well photopatterned in the presence of the photo-crosslinker, and the charge mobilities of the patterned thin films are mostly maintained by comparing with those of the respective pristine thin films. Notably, THF is successfully utilized as the processing and developing solvent to achieve high-density photopatterning with ≈82 000 device arrays cm-2 for polymer semiconductors in which hydroxyl groups are appended in the side chains.

Breaking Fundamental Limitation of Flow-Induced Anisotropic Growth for Large-Scale and Fast Printing of Organic Single-Crystal Films

Advanced organic electronic technologies have put forward a pressing demand for cost-effective and high-throughput fabrication of organic single-crystal films (OSCFs). However, solution-printed OSCFs are typically plagued by the existence of abundant structural defects, which pose a formidable challenge to achieving large-scale and high-performance organic electronics. Here, it is elucidated that these structural defects are mainly originated from printing flow-induced anisotropic growth, an important factor that is overlooked for too long. In light of this, a surfactant-additive printing method is proposed to effectively overcome the anisotropic growth, enabling the deposition of uniform OSCFs over the wafer scale at a high speed of 1.2 mm s-1 at room temperature. The resulting OSCF exhibits appealing performance with a high average mobility up to 10.7 cm2 V-1 s-1, which is one of the highest values for flexible organic field-effect transistor arrays. Moreover, large-scale OSCF-based flexible logic circuits, which can be bent without degradation to a radius as small as 4.0 mm and over 1000 cycles are realized. The work provides profound insights into breaking the limitation of flow-induced anisotropic growth and opens new avenues for printing large-scale organic single-crystal electronics.

Photoluminescence variations in organic fluorescent crystals by changing the surface energy of the substrate

Organic fluorescent crystals were obtained using single-benzene-based diethyl 2,5-dihydroxyterephthalate (DDT) molecules through crystallization from a droplet of the DDT solution on an Au substrate. To control the size of the DDT crystals, the surface energy of the Au substrate was modified with air plasma treatment, producing a hydrophilic surface and a hydrophobic self-assembled monolayer (SAM) coating. The size of DDT crystals increased as the surface energy of the substrate decreased. The averaged cross-section area of the DDT crystals on the Au substrates increased in the order of the air-plasma-treated substrate (∼23.43 μm2) < pristine substrate (∼225.6 μm2) < hydrophobic SAM-coated substrate (∼2240 μm2). On the other hand, the main emission of the DDT crystals redshifted from blue to green as the crystal size increased, which is related to the aggregation of the DDT crystals. Moreover, the coffee-ring effect during the DDT crystallization was hindered by controlling the solvent evaporation conditions. As examples of the application of the proposed technique, patterned DDT crystals were obtained using selectively patterned hydrophobic and hydrophilic substrates.

A Holistic Review of C = C Crosslinkable Conjugated Molecules in Solution-Processed Organic Electronics: Insights into Stability, Processibility, and Mechanical Properties

Solution-processable organic conjugated molecules (OCMs) consist of a series of aromatic units linked by σ-bonds, which present a relatively freedom intramolecular motion and intermolecular re-arrangement under external stimulation. The cross-linked strategy provides an effective platform to obtain OCMs network, which allows for outstanding optoelectronic, excellent physicochemical properties, and substantial improvement in device fabrication. An unsaturated double carbon-carbon bond (C = C) is universal segment to construct crosslinkable OCMs. In this review, the authors will set C = C cross-linkable units as an example to summarize the development of cross-linkable OCMs for solution-processable optoelectronic applications. First, this review provides a comprehensive overview of the distinctive chemical, physical, and optoelectronic properties arising from the cross-linking strategies employed in OCMs. Second, the methods for probing the C = C cross-linking reaction are also emphasized based on the perturbations of chemical structure and physicochemical property. Third, a series of model C = C cross-linkable units, including styrene, trifluoroethylene, and unsaturated acid ester, are further discussed to design and prepare novel OCMs. Furthermore, a concise overview of the optoelectronic applications associated with this approach is presented, including light-emitting diodes (LEDs), solar cells (SCs), and field-effect transistors (FETs). Lastly, the authors offer a concluding perspective and outlook for the improvement of OCMs and their optoelectronic application via the cross-linking strategy.

Green Printing for Scalable Organic Photovoltaic Modules by Controlling the Gradient Marangoni Flow

Despite the rapid development in the performances of organic solar cells (OSCs), high-performance OSC modules based on green printing are still limited. The severe Coffee-ring effect (CRE) is considered to be the primary reason for the nonuniform distribution of active layer films. To solve this key printing problem, the cosolvent strategy is presented to deposit the active layer films. The guest solvent Mesitylene with a higher boiling point and a lower surface tension is incorporated into the host solvent o-XY to optimize the rheological properties, such as surface tension and viscosity of the active layer solutions. And the synergistic effect of inward Marangoni flow generation and solution thickening caused by the cosolvent strategy can effectively restrain CRE, resulting in highly homogeneous large-area active layer films. In addition, the optimized crystallization and phase separation of active layer films effectively accelerate the charge transport and exciton dissociation of devices. Consequently, based on PM6:BTP-eC9 system, the device prepared with the co-solvent strategy shows the a power conversion efficiency of 17.80%. Moreover, as the effective area scales to 1 and 16.94 cm2, the recorded performances are altered to 16.71% and 14.58%. This study provides a universal pathway for the development of green-printed high-efficiency organic photovoltaics.

Evaporation-induced self-assembly of liquid crystal biopolymers

Evaporation-induced self-assembly (EISA) is a process that has gained significant attention in recent years due to its fundamental science and potential applications in materials science and nanotechnology. This technique involves controlled drying of a solution or dispersion of materials, forming structures with specific shapes and sizes. In particular, liquid crystal (LC) biopolymers have emerged as promising candidates for EISA due to their highly ordered structures and biocompatible properties after deposition. This review provides an overview of recent progress in the EISA of LC biopolymers, including DNA, nanocellulose, viruses, and other biopolymers. The underlying self-assembly mechanisms, the effects of different processing conditions, and the potential applications of the resulting structures are discussed.

Molecular Electronics: From Nanostructure Assembly to Device Integration

Integrated electronics and optoelectronics based on organic semiconductors have attracted considerable interest in displays, photovoltaics, and biosensing owing to their designable electronic properties, solution processability, and flexibility. Miniaturization and integration of devices are growing trends in molecular electronics and optoelectronics for practical applications, which requires large-scale and versatile assembly strategies for patterning organic micro/nano-structures with simultaneously long-range order, pure orientation, and high resolution. Although various integration methods have been developed in past decades, molecular electronics still needs a versatile platform to avoid defects and disorders due to weak intermolecular interactions in organic materials. In this perspective, a roadmap of organic integration technologies in recent three decades is provided to review the history of molecular electronics. First, we highlight the importance of long-range-ordered molecular packing for achieving exotic electronic and photophysical properties. Second, we classify the strategies for large-scale integration of molecular electronics through the control of nucleation and crystallographic orientation, and evaluate them based on factors of resolution, crystallinity, orientation, scalability, and versatility. Third, we discuss the multifunctional devices and integrated circuits based on organic field-effect transistors (OFETs) and photodetectors. Finally, we explore future research directions and outlines the need for further development of molecular electronics, including assembly of doped organic semiconductors and heterostructures, biological interfaces in molecular electronics and integrated organic logics based on complementary FETs.

Cost-Effective Cathode Interlayer Material for Scalable Organic Photovoltaic Cells

Organic photovoltaic (OPV) cells have demonstrated remarkable success on the laboratory scale. However, the lack of cathode interlayer materials for large-scale production still limits their practical application. Here, we rationally designed and synthesized a cathode interlayer, named NDI-Ph. Benefiting from their well-modulated work function and self-doping effect, NDI-Ph-based binary OPV cells achieve an excellent power conversion efficiency (PCE) of 19.1%. NDI-Ph can be easily synthesized on a 100 g scale with a low cost of 1.96 $ g-1 using low-cost raw materials and a simple postprocessing method. In addition, the insensitivity to the film thickness of NDI-Ph enables it to maintain a high PCE at various coating speeds and solution concentrations, demonstrating excellent adaptability for high-throughput OPV cell manufacturing. As a result, a module with 21.9 cm2 active area achieves a remarkable PCEactive of 15.8%, underscoring the prospects of NDI-Ph in the large-scale production of OPV cells.

Diselenophene-Dithioalkylthiophene Based Quinoidal Small Molecules for Ambipolar Organic Field Effect Transistors

This work presents a series of novel quinoidal organic semiconductors based on diselenophene-dithioalkylthiophene (DSpDST) conjugated cores with various side-chain lengths (-thiohexyl, -thiodecyl, and -thiotetradecyl, designated DSpDSTQ-6, DSpDSTQ-10, and DSpDSTQ-14, respectively). The purpose of this research is to develop solution-processable organic semiconductors using dicyanomethylene end-capped organic small molecules for organic field effect transistors (OFETs) application. The physical, electrochemical, and electrical properties of these new DSpDSTQs are systematically studied, along with their performance in OFETs and thin film morphologies. Additionally, the molecular structures of DSpDSTQ are determined through density functional theory (DFT) calculations and single-crystal X-ray diffraction analysis. The results reveal the presence of intramolecular S (alkyl)···Se (selenophene) interactions, which result in a planar SR-containing DSpDSTQ core, thereby promoting extended π-orbital interactions and efficient charge transport in the OFETs. Moreover, the influence of thioalkyl side chain length on surface morphologies and microstructures is investigated. Remarkably, the compound with the shortest thioalkyl chain, DSpDSTQ-6, demonstrates ambipolar carrier transport with the highest electron and hole mobilities of 0.334 and 0.463 cm2 V-1 s-1 , respectively. These findings highlight the excellence of ambipolar characteristics of solution-processable OFETs based on DSpDSTQs even under ambient conditions.

Monolayer Organic Crystals for Ultrahigh Performance Molecular Diodes

Molecular diodes are of considerable interest for the increasing technical demands of device miniaturization. However, the molecular diode performance remains contact-limited, which represents a major challenge for the advancement of rectification ratio and conductance. Here, it is demonstrated that high-quality ultrathin organic semiconductors can be grown on several classes of metal substrates via solution-shearing epitaxy, with a well-controlled number of layers and monolayer single crystal over 1 mm. The crystals are atomically smooth and pinhole-free, providing a native interface for high-performance monolayer molecular diodes. As a result, the monolayer molecular diodes show record-high rectification ratio up to 5 × 108 , ideality factor close to unity, aggressive unit conductance over 103 S cm-2 , ultrahigh breakdown electric field, excellent electrical stability, and well-defined contact interface. Large-area monolayer molecular diode arrays with 100% yield and excellent uniformity in the diode metrics are further fabricated. These results suggest that monolayer molecular crystals have great potential to build reliable, high-performance molecular diodes and deeply understand their intrinsic electronic behavior.

A Guide to Printed Stretchable Conductors

Printing of stretchable conductors enables the fabrication and rapid prototyping of stretchable electronic devices. For such applications, there are often specific process and material requirements such as print resolution, maximum strain, and electrical/ionic conductivity. This review highlights common printing methods and compatible inks that produce stretchable conductors. The review compares the capabilities, benefits, and limitations of each approach to help guide the selection of a suitable process and ink for an intended application. We also discuss methods to design and fabricate ink composites with the desired material properties (e.g., electrical conductance, viscosity, printability). This guide should help inform ongoing and future efforts to create soft, stretchable electronic devices for wearables, soft robots, e-skins, and sensors.

Rapid Meniscus-Assisted Solution Printing of Large-Area Stripe Arrays of Highly Oriented Conjugated Polymers for Field-Effect Transistors

The ability to pattern semiconducting conjugated polymers (CPs) and concurrently enable their highly oriented chains represents an important endeavor to render their high charge mobility for electronic devices. However, simple yet generalizable routes to CPs with such desirable characteristics are limited. Herein, we report a robust meniscus-assisted solution printing (MASP) strategy to craft arrays of donor-acceptor CP stripes and scrutinize the correlation between different stripes and their charge transport attributes. Specifically, the MASP constrains the CP solution to evaporate between two nearly parallel plates with a stationary upper plate and a mobile lower plate containing periodic photoresist (PR) microchannels. Orchestrating the MASP speed comparable to the CP crystal growth rate yields CP stripe arrays with highly aligned CP crystals, resulting in the highest carrier mobility. Notably, our MASP technique can conveniently pattern other CPs of interest. It stands out as a simple strategy to impart large-scale production of functional materials for a wide range of applications in optics, electronics, sensors, etc.

Unfolding the Correlation between Solution Aggregation and Solid-State Crystal Orientation in Donor-Acceptor Copolymers via Solvent Additive Processing

Tailoring the crystal orientation of donor-acceptor (D-A) copolymers is vital for boosting the performance of optoelectronic devices. Despite recent advances in controlling the crystal orientation of D-A copolymers in films, the investigation into their aggregates in solution and the correlation between the solution aggregates and solid-state crystal orientation has been limited. Herein, an effective solvent additive strategy is reported for tuning solution aggregates and the consequent solid-state structures of poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)). Specifically, the addition of 1-decanethiol (10-thiol) to the P(NDI2OD-T2) chloroform solution promoted the aggregation of P(NDI2OD-T2) chains because of the improved planarization of the backbones, which changed their crystal orientation in the film from coexisting edge-on and face-on to dominant edge-on when produced by drop-casting. The mechanism of this crystal orientation transformation is elucidated based on the interaction between 10-thiol and the side chains of P(NDI2OD-T2). The optical properties of P(NDI2OD-T2) films with different crystalline structures are closely correlated. Notably, the 10-thiol-enabled facile tailoring of the crystal orientation in P(NDI2OD-T2) can be readily applied to other D-A copolymers of interest. The findings of this study highlight a robust solvent additive strategy for regulating solution aggregates and crystal orientation in D-A copolymer films, which have applications in many optoelectronic devices.

Coplanar Conformational Structure of π-Conjugated Polymers for Optoelectronic Applications

Hierarchical structure of conjugated polymers is critical to dominating their optoelectronic properties and applications. Compared to nonplanar conformational segments, coplanar conformational segments of conjugated polymers (CPs) demonstrate favorable properties for applications as a semiconductor. Herein, recent developments in the coplanar conformational structure of CPs for optoelectronic devices are summarized. First, this review comprehensively summarizes the unique properties of planar conformational structures. Second, the characteristics of the coplanar conformation in terms of optoelectrical properties and other polymer physics characteristics are emphasized. Five primary characterization methods for investigating the complanate backbone structures are illustrated, providing a systematical toolbox for studying this specific conformation. Third, internal and external conditions for inducing the coplanar conformational structure are presented, offering guidelines for designing this conformation. Fourth, the optoelectronic applications of this segment, such as light-emitting diodes, solar cells, and field-effect transistors, are briefly summarized. Finally, a conclusion and outlook for the coplanar conformational segment regarding molecular design and applications are provided.

Processability Considerations for Next-Generation Organic Photovoltaic Materials

The evolution of organic semiconductors for organic photovoltaics (OPVs) has resulted in unforeseen outcomes. This has provided substitute choices of photoactive layer materials, which effectively convert sunlight into electricity. Recently developed OPV materials have narrowed down the gaps in efficiency, stability, and cost in devices. Records now show power conversion efficiency in single-junction devices closing to 20%. Despite this, there is still a gap between the currently developed OPV materials and those that meet the requirements of practical applications, especially the solution processability issue widely concerned in the field of OPVs. Based on the general rule that structure determines properties, methodologies to enhance the processability of OPV materials are reviewed and explored from the perspective of material design and views on the further development of processable OPV materials are presented. Considering the current dilemma that the existing evaluation indicators cannot reflect the industrial processability of OPV materials, a more complete set of key performance indicators are proposed for their processability considerations. The purpose of this perspective is to raise awareness of the boundary conditions that exist in industrial OPV manufacturing and to provide guidance for academic research that aspires to contribute to technological advancements.

Conjugated Polymer Process Ontology and Experimental Data Repository for Organic Field-Effect Transistors

Polymer-based semiconductors and organic electronics encapsulate a significant research thrust for informatics-driven materials development. However, device measurements are described by a complex array of design and parameter choices, many of which are sparsely reported. For example, the mobility of a polymer-based organic field-effect transistor (OFET) may vary by several orders of magnitude for a given polymer as a plethora of parameters related to solution processing, interface design/surface treatment, thin-film deposition, postprocessing, and measurement settings have a profound effect on the value of the final measurement. Incomplete contextual, experimental details hamper the availability of reusable data applicable for data-driven optimization, modeling (e.g., machine learning), and analysis of new organic devices. To curate organic device databases that contain reproducible and findable, accessible, interoperable, and reusable (FAIR) experimental data records, data ontologies that fully describe sample provenance and process history are required. However, standards for generating such process ontologies are not widely adopted for experimental materials domains. In this work, we design and implement an object-relational database for storing experimental records of OFETs. A data structure is generated by drawing on an international standard for batch process control (ISA-88) to facilitate the design. We then mobilize these representative data records, curated from the literature and laboratory experiments, to enable data-driven learning of process-structure-property relationships. The work presented herein opens the door for the broader adoption of data management practices and design standards for both the organic electronics and the wider materials community.

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions. This method uses a Langmuir-Schaefer-type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π-conjugated molecules. Using UV-vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi-Langmuir layers and enables the production of films with defined morphology. The variation in nearest-neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square-wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

Rational control of meniscus-guided coating for organic photovoltaics

Meniscus-guided coating exhibiting outstanding depositing accuracy, functional diversity, and operating convenience is widely used in printing process of photovoltaic electronics. However, current studies about hydrodynamic behaviors of bulk heterojunction ink are still superficial, and the key dynamic parameter dominating film formation is still not found. Here, we establish the principle of accurately evaluate the Hamaker constant and reveal the critical effect of precursor film length in determining flow evolution, the polymer aggregation, and final morphology. A shorter precursor film is beneficial to restraining chain relaxation, enhancing molecular orientation and mobility. On the basis of our precursor film-length prediction method proposed in this work, the optimal coating speed can be accurately traced. Last, a 18.39% power conversion efficiency has been achieved in 3-cm2 cell based on bulk heterojunction fabricated by blade coating, which shows few reduce from 19.40% in a 0.04-cm2 cell based on spin coating.

Directional Crystallization of Conjugated Molecules during Coating Processes

The coating of organic molecules from the solution phase can result in directional crystal growth under certain conditions, even on a smooth isotropic surface and without the need of any kind of graphoexpitaxial preparation of the substrate. Based on reviewing the results from a variety of coating techniques and coating parameters, we identified that it is crucial for the coating speed to match the growth speed of the fastest growing crystal plane to achieve a high degree of directional crystallization.

Conductance stable and mechanically durable bi-layer EGaIn composite-coated stretchable fiber for 1D bioelectronics

Deformable semi-solid liquid metal particles (LMP) have emerged as a promising substitute for rigid conductive fillers due to their excellent electrical properties and stable conductance under strain. However, achieving a compact and robust coating of LMP on fibers remains a persistent challenge, mainly due to the incompatibility of conventional coating techniques with LMP. Additionally, the limited durability and absence of initial electrical conductivity of LMP restrict their widespread application. In this study, we propose a solution process that robustly and compactly assembles mechanically durable and initially conductive LMP on fibers. Specifically, we present a shearing-based deposition of polymer-attached LMP followed by additional coating with CNT-attached LMP to create bi-layer LMP composite with exceptional durability, electrical conductivity, stretchability, and biocompatibility on various fibers. The versatility and reliability of this manufacturing strategy for 1D electronics are demonstrated through the development of sewn electrical circuits, smart clothes, stretchable biointerfaced fiber, and multifunctional fiber probes.

Amorphous Fluorinated Acrylate Polymer Dielectrics for Flexible Transistors and Logic Gates with High Operational Stability

Fluorinated amorphous polymeric gate-insulating materials for organic thin-film transistors (OTFTs) not only form hydrophobic surfaces but also significantly reduce traps at the interface between the organic semiconductor and gate insulator. Therefore, these polymeric materials can enhance the OTFT's operation stability. In this study, we synthesized a new polymeric insulating material series composed of acrylate and fluorinated functional groups (with different ratios) named MBHCa-F and used them as gate insulators for OTFTs and in other applications. The insulating features of the MBHCa-F polymers, including surface energy, surface atomic content properties, dielectric constant, and leakage current, were clearly analyzed with respect to the content of the fluorinated functional groups. At higher fluorine-based functional group content, the polymeric series exhibited higher fluorine-based contents at the surface and superior electrical properties, such as field-effect mobility and driving stability, at OTFTs. Therefore, we believe that this study provides a substantial method for synthesizing polymeric insulating materials to enhance the operational stability and electrical performance of OTFTs.

High-Speed Printing of Narrow-Band-Gap Sn-Pb Perovskite Layers toward Cost-Effective Manufacturing of Optoelectronic Devices

Narrow-band-gap Sn-Pb perovskites have emerged as one of the most promising solution-processed near-infrared (NIR) light-detection technologies, with the key figure-of-merit parameters already rivaling those of commercial inorganic devices, but maximizing the cost advantage of solution-processed optoelectronic devices depends on the ability to fast-speed production. However, weak surface wettability to perovskite inks and evaporation-induced dewetting dynamics have limited the solution printing of uniform and compact perovskite films at a high speed. Here, we report a universal and effective methodology for fast printing of high-quality Sn-Pb mixed perovskite films at an unprecedented speed of 90 m h^-1 by altering the wetting and dewetting dynamics of perovskite inks with the underlying substrate. A line-structured SU-8 pattern surface to trigger spontaneous ink spreading and fight ink shrinkage is designed to achieve complete wetting with a near-zero contact angle and a uniform dragged-out liquid film. The high-speed printed Sn-Pb perovskite films have both large perovskite grains (>100 μm) and excellent optoelectronic properties, yielding highly efficient self-driven NIR photodetectors with a large voltage responsivity over 4 orders of magnitude. Finally, the potential application of the self-driven NIR photodetector in health monitoring is demonstrated. The fast printing methodology provides a new possibility to extend the manufacturing of perovskite optoelectronic devices to industrial production lines.

Meniscus-Guided Deposition of Organic Semiconductor Thin Films: Materials, Mechanism, and Application in Organic Field-Effect Transistors

Solution-processable organic semiconductors are one of the promising materials for the next generation of organic electronic products, which call for high-performance materials and mature processing technologies. Among many solution processing methods, meniscus-guided coating (MGC) techniques have the advantages of large-area, low-cost, adjustable film aggregation, and good compatibility with the roll-to-roll process, showing good research results in the preparation of high-performance organic field-effect transistors. In this review, the types of MGC techniques are first listed and the relevant mechanisms (wetting mechanism, fluid mechanism, and deposition mechanism) are introduced. The MGC processes are focused and the effect of the key coating parameters on the thin film morphology and performance with examples is illustrated. Then, the performance of transistors based on small molecule semiconductors and polymer semiconductor thin films prepared by various MGC techniques is summarized. In the third section, various recent thin film morphology control strategies combined with the MGCs are introduced. Finally, the advanced progress of large-area transistor arrays and the challenges for roll-to-roll processes are presented using MGCs. Nowadays, the application of MGCs is still in the exploration stage, its mechanism is still unclear, and the precise control of film deposition still needs experience accumulation.

Computational Approaches for Organic Semiconductors: From Chemical and Physical Understanding to Predicting New Materials

While a complete understanding of organic semiconductor (OSC) design principles remains elusive, computational methods─ranging from techniques based in classical and quantum mechanics to more recent data-enabled models─can complement experimental observations and provide deep physicochemical insights into OSC structure-processing-property relationships, offering new capabilities for in silico OSC discovery and design. In this Review, we trace the evolution of these computational methods and their application to OSCs, beginning with early quantum-chemical methods to investigate resonance in benzene and building to recent machine-learning (ML) techniques and their application to ever more sophisticated OSC scientific and engineering challenges. Along the way, we highlight the limitations of the methods and how sophisticated physical and mathematical frameworks have been created to overcome those limitations. We illustrate applications of these methods to a range of specific challenges in OSCs derived from π-conjugated polymers and molecules, including predicting charge-carrier transport, modeling chain conformations and bulk morphology, estimating thermomechanical properties, and describing phonons and thermal transport, to name a few. Through these examples, we demonstrate how advances in computational methods accelerate the deployment of OSCsin wide-ranging technologies, such as organic photovoltaics (OPVs), organic light-emitting diodes (OLEDs), organic thermoelectrics, organic batteries, and organic (bio)sensors. We conclude by providing an outlook for the future development of computational techniques to discover and assess the properties of high-performing OSCs with greater accuracy.

Design and Fabrication of Ultrathin Nanoporous Donor-Acceptor Copolymer-Based Organic Field-Effect Transistors for Enhanced VOC Sensing Performance

The development of organic field-effect transistor (OFET) chemical sensors with high sensing performance and good air stability has remained a persistent challenge, thereby hindering their practical application. Herein, an OFET sensor based on a donor-acceptor copolymer is shown to provide high responsivity, sensitivity, and selectivity toward polar volatile organic compounds, as well as good air stability. In detail, a polymer blend of N-alkyl-diketopyrrolo-pyrrole-dithienylthieno[3,2-b]thiophene (DPP-DTT) and polystyrene is coated onto an FET substrate via shearing-assisted phase separation (SAPS) combined with selective solvent etching to fabricate the DPP-DTT-based OFET device having an ultrathin nanoporous structure suitable for gas sensing applications. This is achieved via optimization of the film morphology by varying the shear rate to adjust the dynamic balance between the shear and capillary forces to obtain an ultrathin thickness (∼8 nm) and nanopore size (80 nm) that are favorable for the efficient diffusion and interaction of analytes with the active layer. In particular, the sensor presents high responsivities toward methanol (∼70%), acetone (∼51.3%), ethanol (∼39%), and isopropyl alcohol (IPA) (∼29.8%), along with fast response and recovery times of ∼80 and 234 s, respectively. Moreover, the average sensitivity was determined to be 5.75%/ppm from the linear plot of the responsivity against the methanol concentration in the range of 1-100 ppm. Importantly, the device also exhibits excellent long-term (30-day) air and thermal storage stability, thereby demonstrating its high potential for practical applications.

Inorganic Perovskite Quantum Dot-Mediated Photonic Multimodal Synapse

Artificial synapse is the basic unit of a neuromorphic computing system. However, there is a need to explore suitable synaptic devices for the emulation of synaptic dynamics. This study demonstrates a photonic multimodal synaptic device by implementing a perovskite quantum dot charge-trapping layer in the organic poly(3-hexylthiophene-2,5-diyl) (P3HT) channel transistor. The proposed device presents favorable band alignment that facilitates spatial separation of photogenerated charge carriers. The band alignment serves as the basis of optically induced charge trapping, which enables nonvolatile memory characteristics in the device. Furthermore, high photoresponse and excellent synaptic characteristics, such as short-term plasticity, long-term plasticity, excitatory postsynaptic current, and paired-pulse facilitation, are obtained through gate voltage regulation. Photosynaptic characteristics obtained from the device showed a multiwavelength response and a large dynamic range (∼10³) that is suitable for realizing a highly accurate artificial neural network. Moreover, the device showed nearly linear synaptic weight update characteristics with incremental depression electric gate pulse. The simulation based on the experimental data showed excellent pattern recognition accuracy (∼85%) after 120 epochs. The results of this study demonstrate the feasibility of the device as an optical synapse in the next-generation neuromorphic system.

Asymmetric Wettability Mediated Patterning of Single Crystalline Nematic Liquid Crystal and P-N Heterojunction Toward a Broadband Photodetector

The well aligned and precise patterning of liquid crystals (LCs) are considered as two key challenges for large-scale and high-efficiency integrated optoelectronic devices. However, owing to the uncontrollable liquid flow and dewetting process in the conventional techniques, most of the reported research is mainly focused on simple sematic LCs, which are composed of terthiophenes or benzothieno[3, 2-b][1] benzothiophene backbone; only a few works are carried out on the complicated LCs. Herein, an efficient strategy was introduced to control the liquid flow and alignment of LCs and realized precise and high-quality patterning of A-π-D-π-A BTR, based on the asymmetric wettability interface. Through this strategy, the large-area and well-aligned BTR microwires array was fabricated, which exhibited highly ordered molecular packing and improved charge transport performance. Furthermore, the integration of BTR and PC₇₁BM was achieved to manufacture uniform P-N heterojunction arrays, which still possessed highly ordered alignment of BTR. On the basis of these aligned heterojunction arrays, the high-performance photodetector exhibited an excellent responsivity of 27.56 A W^-1 and a specific detectivity of 2.07 × 10¹² Jones. This research not only provides an efficient strategy for the fabrication of aligned micropatterns of LCs but also gives a novel insight for the fabrication of high-quality micropatterns of the P-N heterojunction toward integrated optoelectronics.

Flexible Electronics Based on Organic Semiconductors: from Patterned Assembly to Integrated Applications

Organic flexible electronic devices are at the forefront of the electronics as they possess the potential to bring about a major lifestyle revolution owing to outstanding properties of organic semiconductors, including solution processability, lightweight and flexibility. For the integration of organic flexible electronics, the precise patterning and ordered assembly of organic semiconductors have attracted wide attention and gained rapid developments, which not only reduces the charge crosstalk between adjacent devices, but also enhances device uniformity and reproducibility. This review focuses on recent advances in the design, patterned assembly of organic semiconductors, and flexible electronic devices, especially for flexible organic field-effect transistors (FOFETs) and their multifunctional applications. First, typical organic semiconductor materials and material design methods are introduced. Based on these organic materials with not only superior mechanical properties but also high carrier mobility, patterned assembly strategies on flexible substrates, including one-step and two-step approaches are discussed. Advanced applications of flexible electronic devices based on organic semiconductor patterns are then highlighted. Finally, future challenges and possible directions in the field to motivate the development of the next generation of flexible electronics are proposed.

Sub-resolution contrast in neutral helium microscopy through facet scattering for quantitative imaging of nanoscale topographies on macroscopic surfaces

Nanoscale thin film coatings and surface treatments are ubiquitous across industry, science, and engineering; imbuing specific functional or mechanical properties (such as corrosion resistance, lubricity, catalytic activity and electronic behaviour). Non-destructive nanoscale imaging of thin film coatings across large (ca. centimetre) lateral length scales, crucial to a wide range of modern industry, remains a significant technical challenge. By harnessing the unique nature of the helium atom-surface interaction, neutral helium microscopy images these surfaces without altering the sample under investigation. Since the helium atom scatters exclusively from the outermost electronic corrugation of the sample, the technique is completely surface sensitive. Furthermore, with a cross-section that is orders of magnitude larger than that of electrons, neutrons and photons, the probe particle routinely interacts with features down to the scale of surface defects and small adsorbates (including hydrogen). Here, we highlight the capacity of neutral helium microscopy for sub-resolution contrast using an advanced facet scattering model based on nanoscale features. By replicating the observed scattered helium intensities, we demonstrate that sub-resolution contrast arises from the unique surface scattering of the incident probe. Consequently, it is now possible to extract quantitative information from the helium atom image, including localised ångström-scale variations in topography.

Large-Area Blade-Coated Deep-Blue Polymer Light-Emitting Diodes with a Narrowband and Uniform Emission

Large-area polymer light-emitting diodes (PLEDs) manufactured by printing are required for flat-panel lighting and displays. Nevertheless, it remains challenging to fabricate large-area and stable deep-blue PLEDs with narrowband emission due to the difficulties in precisely tuning film uniformity and obtaining single-exciton emission. Herein, efficient and stable large-area deep-blue PLEDs with narrowband emission are prepared from encapsulated polydiarylfluorene. Encapsulated polydiarylfluorenes presented an efficient and stable deep-blue emission (peak: 439 nm; full width at half maximum (FWHM): 39 nm) in the solid state due to their single-chain emission behavior without inter-backbone chain aggregation. Large-area uniform blade-coated films (16 cm2 ) are also fabricated with excellent smoothness and morphology. Benefitting from efficient emission and excellent printed capacity, the blade-coated PLEDs with a device area of 9 mm2 realized uniform deep-blue emission (FWHM: 38 nm; CIE: 0.153, 0.067), with a corresponding maximum external quantum efficiency and the brightness comparable to those of devices based on spin-coated films. Finally, considering the essential role of deep-blue LEDs, a preliminary patterned PLED array with a pixel size of 800 × 1000 µm2 and a monochrome display is fabricated, highlighting potential full-color display applications.

Unraveling the Co-Crystallization-Charge Transport Relation in Conjugated Polymer Blends via Meniscus-Assisted Solution-Shearing

The ability to craft the co-crystallization in conjugated polymer blends represents an important endeavor for the enhancement of charge transport. However, simple and efficient approaches to co-crystallization have yet to be realized. Herein, for the first time, a robust meniscus-assisted solution-shearing (MASS) strategy is reported to achieve co-crystallization in the poly(2,5-bis(3-hexylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C6) and poly(2,5-bis(3-decylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C10) blended films, and correlate this co-crystalline structure to the charge transport properties. The as-cast PBTTT-C6/PBTTT-C10 blends exhibit co-crystalline or phase-separated structures influenced by their molecular weights. Interestingly, confined-shearing of the initial phase-separated blended solution to MASS produces the formation of their co-crystallization. The co-crystallization kinetics accompanied by the chain packing change and optical properties are scrutinized. Finally, the resulting organic field-effect transistors (OFETs) signify the cocrystal-facilitated charge transport in the blends. Conceptually, this efficient MASS strategy in rendering the co-crystallization in conjugated polymer blends can be readily extended to other conjugated polymer blends of interest for a variety of device applications.

High throughput processing of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) organic semiconductors

The deposition of organic semiconductors (OSCs) using solution shearing deposition techniques is highly appealing for device implementation. However, when using high deposition speeds, it is necessary to use very concentrated OSC solutions. The OSCs based on the family of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) have been shown to be excellent OSCs due to their high mobility and stability. However, their limited solubility hinders the processing of these materials at high speed. Here, we report the conditions to process alkylated DNTT and the S-shaped π-core derivative S-DNTT by bar-assisted meniscus shearing (BAMS) at high speed (i.e., 10 mm s^-1). In all the cases, homogeneous thin films were successfully prepared, although we found that the gain in solubility achieved with the S-DNTT derivative strongly facilitated solution processing, achieving a field-effect mobility of 2.1 cm² V^-1 s^-1, which is two orders of magnitude higher than the mobility found for the less soluble linear derivatives.

Preparation and Electrochromic Properties of Benzodithiophene-Isoindigo Conjugated Polymers with Oligoethylene Glycol Side Chains

Functional polymers featuring good processability in non-halogenated, benzene-free green solvents are highly desired due to health and environmental concerns. Herein, a series of novel D-A type conjugated polymers, PBDT-IIDs, are designed and successfully prepared by "green" functionalization of the polymers with highly hydrophilic, highly polar, highly flexible, and biocompatible oligoethylene glycol (OEG) side chains in order to improve the processability. These series polymers are named PBDT-IID2, PBDT-IID3, and PBDT-IID4, respectively, according to the number of oxygen atoms in the side chain. After confirmation by structural characterization, the basic properties of PBDT-IIDs are also investigated. With the increase in the OEG side chain length, the polymer PBDT-IID4 not only has good solubility in the halogen solvent chlorobenzene, but also exhibits excellent solubility in the green halogen-free solvent methyltetrahydrofuran (Me-THF). As a result, the green solvent Me-THF can also be applied to prepare PBDT-IIDs' electrochromic active layers, except for chlorobenzene and toluene. The electrochromism of PBDT IIDs under both positive and negative voltages has a practical application potential. The several controllable switches between dark green and khaki (0-0.6 V) are expected to show great potential in the field of military camouflage. Furthermore, according to the principle of red, green, and blue (RGB) mixing, light blue-green in the reduced state (-1.6 V) can be used in the preparation of complementary ECDs to provide one of the three primary colors (green).

Solution-Processed Isoindigo- and Thienoisoindigo-Based Donor-Acceptor-Donor π-Conjugated Small Molecules: Synthesis, Morphology, Molecular Packing, and Field-Effect Transistor Characterization

Molecular design and precise control of thin-film morphology and crystallinity of solution-processed small molecules are important for enhancing charge transport mobility of organic field-effect transistors and gaining more insight into the structure-property relationship. Here, two donor-acceptor-donor (D-A-D) architecture small molecules TRA-IID-TRA and TRA-TIID-TRA comprising an electron-donating triarylamine (TRA) and two different electron-withdrawing cores, isoindigo (IID) and thienoisoindigo (TIID), respectively, were synthesized and characterized. Replacing the phenylene rings of central IID A with thiophene gives a TIID core, which reduces the optical band gap and upshifts the energy levels of frontier molecular orbitals. The single-crystal structures and grazing-incidence wide-angle X-ray scattering (GIWAXS) analysis revealed that TRA-TIID-TRA exhibits the relatively tighter π-π stacking packing with preferential edge-on orientation, larger coherence length, and higher crystallinity due to the noncovalent S···O/S···π intermolecular interactions. The distinctly oriented and connected ribbon-like TRA-TIID-TRA crystalline film by the solution-shearing process achieved a superior hole mobility of 0.89 cm² V^-1 s^-1 in the organic field-effect transistor (OFET) device, which is at least five times higher than that (0.17 cm² V^-1 s^-1) of TRA-IID-TRA with clear cracks. Eventually, rational modulation of fused core in the π-conjugated D-A-D small molecule provides a new understanding of structural design for enhancing the performance of solution-processed organic semiconductors.

Gas-assisted blade-coating of organic semiconductors: molecular assembly, device fabrication and complex thin-film structuring

The competitive performance of optoelectronic devices based on advanced organic semiconductors increasingly calls for suitably scalable processing schemes to capitalise on their application potential. With performance benchmarks typically established by spin-coating fabrication, doctor-blade deposition represents a widely available roll-to-roll-compatible means for the preparation of large-area samples and establishing the device upscaling potential. However, the inherently slower film formation kinetics often result in unfavourable active layer microstructures, requiring empirical and material-inefficient optimisation of solutions to reach the performance of spin-coated devices. Here we present a versatile approach to achieving performance parity for spin- and blade-coated devices using in situ gas-assisted drying enabled by a modular 3D-printed attachment. This is illustrated for organic photodetectors (OPDs) featuring bulk heterojunction active layers comprising blends of P3HT and PM6 polymer donors with the nonfullerene acceptor ITIC. Compared to conventionally blade-coated devices, mild drying gas pressures of 0.5-2 bar yield up to a 10-fold enhancement of specific detectivity by maximising external quantum efficiency and suppressing dark-current. Furthermore, controlling gas flux distribution enables one-step fabrication of 1D chain conformation and 2D chain orientation patterns in, respectively, PFO and P3HT:N2200 blend films, opening the possibility for high-throughput fabrication of devices with complex structured active layers.

Substrate-Independent Maskless Writing of Functionalized Microstructures Using CHic Chemistry and Digital Light Processing

Maskless photolithography based on digital light processing (DLP) is an attractive technique for the rapid, flexible, and cost-effective fabrication of complex structures with arbitrary surface profiles on the microscale. In this work, we introduce a new material system for structure formation by DLP that is based on photoreactive polymers for the local and light-induced C,H-insertion cross-linking (CHic). This approach allows a simple and versatile generation of microstructures with a broad spectrum of geometries and chemistries irrespective of the nature of the chosen substrates and thus allows direct writing of surface functionalization patterns with high spatial control. The CHicable prepolymer is first coated on a substrate to form a solvent-free (glassy) film, and then the DLP system patterns the light with arbitrary shape to induce local cross-linking of the prepolymer. Using this method, the desired structures with complex features with a lateral resolution of several microns and a topography of tens of nanometers could be fabricated within 30 s. Furthermore, the universal applicability of the CHic reaction enables the printing on a wide variety of substrates, which greatly broadens the using scenarios of this printing approach.

Fast-Coating Process Based on Elongated Rodlike Preaggregate for Highly Oriented Thin Film of Donor-Acceptor π-Conjugated Polymer

A fast meniscus-guided coating for ultrahighly oriented thin films of a typical donor-acceptor π-conjugated polymer, poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)](PDPP-DTT) was realized. A coating speed higher than 100 mm/s, which was regarded as a Landau-Levich regime, was applicable. The 2D order parameter (S2) of the thin films changed by selecting the solvent and adjusting the initial concentration of the solution, and the large elongated rodlike preaggregates formed particularly in chlorobenzene contributed to the high orientation in the solid film state, resulting in the highest value of S2 = 0.87. Focused on the PDPP-DTT preaggregate formation in the solution, the SAXS analysis was carried out to investigate the shape and size of the preaggregates. The mechanism of the molecular orientation was discussed by taking the preaggregates and the solution flow under the coating process into account.

Self-assembly, alignment, and patterning of metal nanowires

Armed with the merits of one-dimensional nanostructures (flexibility, high aspect ratio, and anisotropy) and metals (high conductivity, plasmonic properties, and catalytic activity), metal nanowires (MNWs) have stood out as a new class of nanomaterials in the last two decades. They are envisaged to expedite significantly and even revolutionize a broad spectrum of applications related to display, sensing, energy, plasmonics, photonics, and catalysis. Compared with disordered MNWs, well-organized MNWs would not only enhance the intrinsic physical and chemical properties, but also create new functions and sophisticated architectures of optoelectronic devices. This paper presents a comprehensive review of assembly strategies of MNWs, including self-assembly for specific structures, alignment for anisotropic constructions, and patterning for precise configurations. The technical processes, underlying mechanisms, performance indicators, and representative applications of these strategies are described and discussed to inspire further innovation in assembly techniques and guide the fabrication of optoelectrical devices. Finally, a perspective on the critical challenges and future opportunities of MNW assembly is provided.