Néel-type skyrmion in WTe2/Fe3GeTe2 van der Waals heterostructure

Polarity-Reversal of Exchange Bias in van der Waals FePS3/Fe3GaTe2 Heterostructures

Exchange bias (EB) in antiferromagnetic (AFM)/ferromagnetic heterostructures is crucial for the advancement of spintronic devices and has attracted significant attention. The common EB effect in van der Waals heterostructures features a low blocking temperature (Tb) and a single polarity. In this work, a significant EB effect with a Tb up to 150 K is observed in FePS3/Fe3GaTe2 heterostructures, and in particular, the EB exhibits an unusual temperature-dependent polarity-reversal behavior. Under a high positive field-cooling condition (e.g., μ0H ≥ 0.5 T), a negative EB field (HEB) is observed at low temperatures, and with increasing temperature, the HEB crosses zero at ≈20 K, subsequently becomes positive and later approaches zero again at Tb. A model composed of a top FePS3/interfacial FePS3/Fe3GaTe2 sandwich structure is proposed. The charge transfer from Fe3GaTe2 to FePS3 at the interface induces net magnetic moments (∆M) in FePS3. The interface favors AFM coupling, and thus the reversal of ∆M of the interfacial FePS3 leads to the polarity-reversal of EB. Moreover, the EB can be extended to the bare Fe3GaTe2 region of the Fe3GaTe2 flake partially covered by FePS3. This work provides opportunities for a deeper understanding of the EB effect and opens a new route toward constructing novel spintronic devices.

Layered hybrid superlattices as designable quantum solids

Crystalline solids typically show robust long-range structural ordering, vital for their remarkable electronic properties and use in functional electronics, albeit with limited customization space. By contrast, synthetic molecular systems provide highly tunable structural topologies and versatile functionalities but are often too delicate for scalable electronic integration. Combining these two systems could harness the strengths of both, yet realizing this integration is challenging owing to distinct chemical bonding structures and processing conditions. Two-dimensional atomic crystals comprise crystalline atomic layers separated by non-bonding van der Waals gaps, allowing diverse atomic or molecular intercalants to be inserted without disrupting existing covalent bonds. This enables the creation of a diverse set of layered hybrid superlattices (LHSLs) composed of alternating crystalline atomic layers of variable electronic properties and self-assembled atomic or molecular interlayers featuring customizable chemical compositions and structural motifs. Here we outline strategies to prepare LHSLs and discuss emergent properties. With the versatile molecular design strategies and modular assembly processes, LHSLs offer vast flexibility for weaving distinct chemical constituents and quantum properties into monolithic artificial solids with a designable three-dimensional potential landscape. This opens unprecedented opportunities to tailor charge correlations, quantum properties and topological phases, thereby defining a rich material platform for advancing quantum information science.

Strain-driven skyrmion-bimeron switching in topological magnetic monolayer CrSeBr

Skyrmion-bimeron switching is one of the most important phenomena in topological magnetism. Currently, it is usually realized by the annoying spin orientation vertical-reversal through magnetic field. Based on first-principles calculations and atomic spin simulations, we alternatively unveil that the switching between magnetic skyrmions and bimerons can be achieved in topological magnetic monolayer CrSeBr by external strain. The core mechanism of this switching is traced to the controllable magnetic anisotropy of monolayer CrSeBr influenced by the strain-engineered low-energy states around the Fermi level. We also introduce a parameter |κ| as a criterion for judging the stability of magnetic skyrmions and bimerons, which can be adopted as a useful descriptor linking the presence of skyrmion-bimeron switching driven by strain. The underlying physics is discussed in detail. The predicted strain controlled skyrmion-bimeron switching may be interesting for topological magnetic devices.

Dynamic Behavior of Above-Room-Temperature Robust Skyrmions in 2D Van der Waals Magnet

Magnetic skyrmions are swirl-like spin configurations that present topological properties, which have great potential as information carriers for future high-density and low-energy-consumption devices. The optimization of skyrmion-hosting materials that can be integrated with semiconductor-based circuits is the primary challenge for their industrialization. Two-dimensional van der Waals ferromagnets are emerging materials that have excellent carrier mobility and compatibility with integrated circuits, making them an ideal candidate for spintronic devices. Here, we report the realization of skyrmions at above room temperature in the 2D ferromagnet Fe3GaTe2. The thickness tunability of their skyrmion size and the formation of the skyrmion lattice are revealed. Furthermore, we demonstrate that the skyrmions can be moved by a low-density current at room temperature, together with an apparent skyrmion Hall effect, which is consistent with our quantitative micromagnetic simulation. Our work offers a promising 2D material platform for harnessing magnetic skyrmions in practical device applications.

Synthesis, Modulation, and Application of Two-Dimensional TMD Heterostructures

Two-dimensional (2D) transition metal dichalcogenide (TMD) heterostructures have attracted a lot of attention due to their rich material diversity and stack geometry, precise controllability of structure and properties, and potential practical applications. These heterostructures not only overcome the inherent limitations of individual materials but also enable the realization of new properties through appropriate combinations, establishing a platform to explore new physical and chemical properties at micro-nano-pico scales. In this review, we systematically summarize the latest research progress in the synthesis, modulation, and application of 2D TMD heterostructures. We first introduce the latest techniques for fabricating 2D TMD heterostructures, examining the rationale, mechanisms, advantages, and disadvantages of each strategy. Furthermore, we emphasize the importance of characteristic modulation in 2D TMD heterostructures and discuss some approaches to achieve novel functionalities. Then, we summarize the representative applications of 2D TMD heterostructures. Finally, we highlight the challenges and future perspectives in the synthesis and device fabrication of 2D TMD heterostructures and provide some feasible solutions.

Enhanced magnetism derived from pore-edge spins in thin Fe3GeTe2nanomeshes

The growth of two-dimensional van der Waals magnetic materials presents attractive opportunities for exploring new physical phenomena and valuable applications. Among these materials, Fe3GeTe2(FGT) exhibits a variety of remarkable properties and has garnered significant attention. Herein, we have for the first time created a nanomesh structure-a honeycomb-like array of hexagonal nanopores-with the zigzag pore-edge atomic structure on thin FGT flakes with and without oxidation of the pore edges. It is revealed that the magnitude of ferromagnetism (FM) significantly increases in both samples compared with bulk flakes without nanomeshes. Critical temperature annealing results in the formation of zigzag pore edges and interpore zigzag-edge nanoribbons. We unveil that the non-oxide (O) termination of the Fe dangling bonds on these zigzag edges enhances FM behavior, while O-termination suppresses this FM by introducing antiferromagnetic behavior through edge O-Fe coupling. FGT nanomeshes hold promise for the creation of strong FM and their effective application in magnetic and spintronic systems.

Understanding and tuning magnetism in van der Waals-type metal thiophosphates

Over the past two decades, significant progress in two-dimensional (2D) materials has invigorated research in condensed matter and material physics in low dimensions. While traditionally studied in three-dimensional systems, magnetism has now been extended to the 2D realm. Recent breakthroughs in 2D magnetism have attracted substantial interest from the scientific community, owing to the stable magnetic order achievable in atomically thin layers of the van der Waals (vdW)-type layered magnetic materials. These advances offer an exciting platform for investigating related phenomena in low dimensions and hold promise for spintronic applications. Consequently, vdW magnetic materials with tunable magnetism have attracted significant attention. Specifically, antiferromagnetic metal thiophosphates MPX3 (M = transition metal, P = phosphorus, X = chalcogen) have been investigated extensively. These materials exhibit long-range magnetic order spanning from bulk to the 2D limit. The magnetism in MPX3 arises from localized moments associated with transition metal ions, making it tunable via substitutions and intercalations. In this review, we focus on such tuning by providing a comprehensive summary of various metal- and chalcogen-substitution and intercalation studies, along with the mechanism of magnetism modulation, and a perspective on the development of this emergent material family.

Controlled Synthesis of 2D Ferromagnetic/Antiferromagnetic Cr7Te8/MnTe Vertical Heterostructures for High-Tunable Coercivity

Two-dimensional ferromagnetic/antiferromagnetic (2D-FM/AFM) heterostructures are of great significance to realize the application of spintronic devices such as miniaturization, low power consumption, and high-density information storage. However, traditional mechanical stacking can easily damage the crystal quality or cause chemical contamination residues for 2D materials, which can result in weak interface coupling and difficulty in device regulation. Chemical vapor deposition (CVD) is an effective way to achieve a high-quality heterostructure interface. Herein, high-quality interface 2D-FM/AFM Cr7Te8/MnTe vertical heterostructures were successfully synthesized via a one-pot CVD method. Moreover, the atomic-scale structural scanning transmission electron microscope (STEM) characterization shows that the interface of the vertical heterostructure is clear and flat without an excess interface layer. Compared to the parent Cr7Te8, the coercivity (HC) of the high-quality interface Cr7Te8/MnTe heterostructure is significantly reduced as the thickness of MnTe increases, with a maximum decrease of 74.5% when the thickness of the MnTe nanosheet is around 30 nm. Additionally, the HC of the Cr7Te8/MnTe heterostructure can also be regulated by applying a gate voltage, and the HC increases or decreases with increasing positive or negative gate voltages. Thus, the effective regulation of HC is essential to improving the performance of advanced spintronic devices (e.g., MRAM and magnetic sensors). Our work will provide ideas for spin controlling and device application of 2D-FM/AFM heterostructures.

Recent advances of two-dimensional materials-based heterostructures for rechargeable batteries

Because of their unique layer structure, 2D materials have demonstrated to be promising electrode materials for rechargeable batteries. However, individual 2D materials cannot meet all the performance requirements of energy density, power density, and cycle life. Constructing 2D materials-based heterostructures offers an opportunity to synergistically handle the deficiencies of individual 2D materials and modulate the physical and electrochemical properties. The enlarged interlayer distance and increased binding energy with ions of heterostructures can facilitate charge transfer, boost electrochemical reactivities, resulting in an enhanced performance in rechargeable batteries. Here we summarize the latest development of heterostructures consisted of 2D materials and their applications in rechargeable batteries. Firstly, different preparation strategies and optimized structure engineering strategies of 2D materials-based heterostructures are systematically introduced. Secondly, the unique functions of 2D materials-based heterostructures in rechargeable batteries are discussed respectively. Finally, challenges and perspectives are presented to inspire the future study of 2D materials-based heterostructures.

Topological Magneto-optical Effect from Skyrmions in Two-Dimensional Ferromagnets

Skyrmions in two-dimensional (2D) magnetic materials are considered as ideal candidates for information carriers in next-generation spintronic devices. However, conventional methods for elucidating the physical properties of skyrmions have limited the development of skyrmions in diverse 2D magnetic material systems due to their requirements for electrical conductivity. To overcome this limitation, we propose to utilize an optical method (magneto-optical Kerr technique) to detect the skyrmions in 2D magnetic materials. Herein, the graphene/Fe3GeTe2/graphene vertical van der Waals (vdW) heterostructure devices are fabricated to generate stabilized skyrmions by applying out-of-plane current. In combination with magnetic circular dichroism measurements, we observe topological-reflective magnetic circular dichroism (T-RMCD) effects in Fe3GeTe2 flakes and attribute the peak-shaped component in T-RMCD to the annihilation of skyrmion magnetic domains. Notably, the T-RMCD signal can maintain up to a temperature as high as the Curie temperature of Fe3GeTe2 flakes (∼200 K). Our work provides a universal, contactless, and nondestructive approach for studying the physical properties of skyrmions in 2D vdW magnetic materials while adding another degree of freedom to the modulation of skyrmions.

Influence of Magnetic Sublattice Ordering on Skyrmion Bubble Stability in 2D Magnet Fe5GeTe2

The realization of above room-temperature ferromagnetism in the two-dimensional (2D) magnet Fe5GeTe2 represents a major advance for the use of van der Waals (vdW) materials in practical spintronic applications. In particular, observations of magnetic skyrmions and related states within exfoliated flakes of this material provide a pathway to the fine-tuning of topological spin textures via 2D material heterostructure engineering. However, there are conflicting reports as to the nature of the magnetic structures in Fe5GeTe2. The matter is further complicated by the study of two types of Fe5GeTe2 crystals with markedly different structural and magnetic properties, distinguished by their specific fabrication procedure: whether they are slowly cooled or rapidly quenched from the growth temperature. In this work, we combine X-ray and electron microscopy to observe the formation of magnetic stripe domains, skyrmion-like type-I, and topologically trivial type-II bubbles, within exfoliated flakes of Fe5GeTe2. The results reveal the influence of the magnetic ordering of the Fe1 sublattice below 150 K, which dramatically alters the magnetocrystalline anisotropy and leads to a complex magnetic phase diagram and a sudden change of the stability of the magnetic textures. In addition, we highlight the significant differences in the magnetic structures intrinsic to slow-cooled and quenched Fe5GeTe2 flakes.

Alloying Driven Antiferromagnetic Skyrmions on NiPS3 Monolayer: A First-Principles Calculation

Topological magnetic states are promising information carriers for ultrahigh-density and high-efficiency magnetic storage. Recent advances in two-dimensional (2D) magnets provide powerful platforms for stabilizing various nanometer-size topological spin textures within a wide range of magnetic field and temperature. However, non-centrosymmetric 2D magnets with broken inversion symmetry are scarce in nature, making direct observations of the chiral spin structure difficult, especially for antiferromagnetic (AFM) skyrmions. In this work, it is theoretically predicted that intrinsic AFM skyrmions can be easily triggered in XY-type honeycomb magnet NiPS3 monolayer by alloying of Cr atoms, due to the presence of a sizable Dzyaloshinskii-Moriya interaction. More interestingly, the diameter of the AFM skyrmions in Ni3/4Cr1/4PS3 decreases from 12 to 4.4 nm as the external magnetic field increases and the skyrmion phases remain stable up to an external magnetic field of 4 T. These results highlight an effective strategy to generate and modulate the topological spin texture in 2D magnets by alloying with magnetic element.

Topological Spin Textures: Basic Physics and Devices

In the face of escalating modern data storage demands and the constraints of Moore's Law, exploring spintronic solutions, particularly the devices based on magnetic skyrmions, has emerged as a promising frontier in scientific research. Since the first experimental observation of skyrmions, topological spin textures have been extensively studied for their great potential as efficient information carriers in spintronic devices. However, significant challenges have emerged alongside this progress. This review aims to synthesize recent advances in skyrmion research while addressing the major issues encountered in the field. Additionally, current research on promising topological spin structures in addition to skyrmions is summarized. Beyond 2D structures, exploration also extends to 1D magnetic solitons and 3D spin textures. In addition, a diverse array of emerging magnetic materials is introduced, including antiferromagnets and 2D van der Waals magnets, broadening the scope of potential materials hosting topological spin textures. Through a systematic examination of magnetic principles, topological categorization, and the dynamics of spin textures, a comprehensive overview of experimental and theoretical advances in the research of topological magnetism is provided. Finally, both conventional and unconventional applications are summarized based on spin textures proposed thus far. This review provides an outlook on future development in applied spintronics.

Current-induced domain wall motion in a van der Waals ferromagnet Fe3GeTe2

The manipulation of spin textures by spin currents is of fundamental and technological interest. A particularly interesting system is the 2D van der Waals ferromagnet Fe3GeTe2, in which Néel-type skyrmions have recently been observed. The origin of these chiral spin textures is of considerable interest. Recently, it was proposed that these derive from defects in the structure that lower the symmetry and allow for a bulk vector Dzyaloshinsky-Moriya interaction. Here, we demonstrate current-induced domain wall motion in Fe3GeTe2 flakes, in which the maximum domain wall velocity is an order of magnitude higher than those reported in previous studies. In heterostructures with Pt or W layers on top of the Fe3GeTe2 flakes, domain walls can be moved via a combination of spin transfer and spin-orbit torques. The competition between these torques leads to a change in the direction of domain wall motion with increasing magnitude of the injected current.

Topological Spin Textures in an Insulating van der Waals Ferromagnet

Generation and control of topological spin textures constitutes one of the most exciting challenges of modern spintronics given their potential applications in information storage technologies. Of particular interest are magnetic insulators, which due to low damping, absence of Joule heating and reduced dissipation can provide energy-efficient spin-textures platform. Here, it is demonstrated that the interplay between sample thickness, external magnetic fields, and optical excitations can generate a prolific paramount of spin textures, and their coexistence in insulating CrBr3 van der Waals (vdW) ferromagnets. Using high-resolution magnetic force microscopy and large-scale micromagnetic simulation methods, the existence of a large region in T-B phase diagram is demonstrated where different stripe domains, skyrmion crystals, and magnetic domains exist and can be intrinsically selected or transformed to each-other via a phase-switch mechanism. Lorentz transmission electron microscopy unveils the mixed chirality of the magnetic textures that are of Bloch-type at given conditions but can be further manipulated into Néel-type or hybrid-type via thickness-engineering. The topological phase transformation between the different magnetic objects can be further inspected by standard photoluminescence optical probes resolved by circular polarization indicative of an existence of exciton-skyrmion coupling mechanism. The findings identify vdW magnetic insulators as a promising framework of materials for the manipulation and generation of highly ordered skyrmion lattices relevant for device integration at the atomic level.

Epitaxial Growth of Large-Scale 2D CrTe2 Films on Amorphous Silicon Wafers With Low Thermal Budget

2D van der Waals (vdW) magnets open landmark horizons in the development of innovative spintronic device architectures. However, their fabrication with large scale poses challenges due to high synthesis temperatures (>500 °C) and difficulties in integrating them with standard complementary metal-oxide semiconductor (CMOS) technology on amorphous substrates such as silicon oxide (SiO2) and silicon nitride (SiNx). Here, a seeded growth technique for crystallizing CrTe2 films on amorphous SiNx/Si and SiO2/Si substrates with a low thermal budget is presented. This fabrication process optimizes large-scale, granular atomic layers on amorphous substrates, yielding a substantial coercivity of 11.5 kilo-oersted, attributed to weak intergranular exchange coupling. Field-driven Néel-type stripe domain dynamics explain the amplified coercivity. Moreover, the granular CrTe2 devices on Si wafers display significantly enhanced magnetoresistance, more than doubling that of single-crystalline counterparts. Current-assisted magnetization switching, enabled by a substantial spin-orbit torque with a large spin Hall angle (85) and spin Hall conductivity (1.02 ×  107 ℏ/2e  Ω⁻¹  m⁻¹), is also demonstrated. These observations underscore the proficiency in manipulating crystallinity within integrated 2D magnetic films on Si wafers, paving the way for large-scale batch manufacturing of practical magnetoelectronic and spintronic devices, heralding a new era of technological innovation.

Effect of Surface Oxidation and Crystal Thickness on the Magnetic Properties and Magnetic Domain Structures of Cr2Ge2Te6

van der Waals (vdW) magnetic materials, such as Cr2Ge2Te6 (CGT), show promise for memory and logic applications. This is due to their broadly tunable magnetic properties and the presence of topological magnetic features such as skyrmionic bubbles. A systematic study of thickness and oxidation effects on magnetic domain structures is important for designing devices and vdW heterostructures for practical applications. Here, we investigate thickness effects on magnetic properties, magnetic domains, and bubbles in oxidation-controlled CGT crystals. We find that CGT exposed to ambient conditions for 5 days forms an oxide layer approximately 5 nm thick. This oxidation leads to a significant increase in the oxidation state of the Cr ions, indicating a change in local magnetic properties. This is supported by real-space magnetic texture imaging through Lorentz transmission electron microscopy. By comparing the thickness-dependent saturation field of oxidized and pristine crystals, we find that oxidation leads to a nonmagnetic surface layer that is thicker than the oxide layer alone. We also find that the stripe domain width and skyrmionic bubble size are strongly affected by the crystal thickness in pristine crystals. These findings underscore the impact of thickness and surface oxidation on the properties of CGT, such as saturation field and domain/skyrmionic bubble size, and suggest a pathway for manipulating magnetic properties through a controlled oxidation process.

Above-room-temperature chiral skyrmion lattice and Dzyaloshinskii-Moriya interaction in a van der Waals ferromagnet Fe3-xGaTe2

Skyrmions in existing 2D van der Waals (vdW) materials have primarily been limited to cryogenic temperatures, and the underlying physical mechanism of the Dzyaloshinskii-Moriya interaction (DMI), a crucial ingredient for stabilizing chiral skyrmions, remains inadequately explored. Here, we report the observation of Néel-type skyrmions in a vdW ferromagnet Fe3-xGaTe2 above room temperature. Contrary to previous assumptions of centrosymmetry in Fe3-xGaTe2, the atomic-resolution scanning transmission electron microscopy reveals that the off-centered FeΙΙ atoms break the spatial inversion symmetry, rendering it a polar metal. First-principles calculations further elucidate that the DMI primarily stems from the Te sublayers through the Fert-Lévy mechanism. Remarkably, the chiral skyrmion lattice in Fe3-xGaTe2 can persist up to 330 K at zero magnetic field, demonstrating superior thermal stability compared to other known skyrmion vdW magnets. This work provides valuable insights into skyrmionics and presents promising prospects for 2D material-based skyrmion devices operating beyond room temperature.

Spin disorder control of topological spin texture

Stabilization of topological spin textures in layered magnets has the potential to drive the development of advanced low-dimensional spintronics devices. However, achieving reliable and flexible manipulation of the topological spin textures beyond skyrmion in a two-dimensional magnet system remains challenging. Here, we demonstrate the introduction of magnetic iron atoms between the van der Waals gap of a layered magnet, Fe3GaTe2, to modify local anisotropic magnetic interactions. Consequently, we present direct observations of the order-disorder skyrmion lattices transition. In addition, non-trivial topological solitons, such as skyrmioniums and skyrmion bags, are realized at room temperature. Our work highlights the influence of random spin control of non-trivial topological spin textures.

Direct Observation of Room-Temperature Magnetic Skyrmion Motion Driven by Ultra-Low Current Density in Van Der Waals Ferromagnets

The recent discovery of room-temperature ferromagnetism in 2D van der Waals (vdW) materials, such as Fe3GaTe2 (FGaT), has garnered significant interest in offering a robust platform for 2D spintronic applications. Various fundamental operations essential for the realization of 2D spintronics devices are experimentally confirmed using these materials at room temperature, such as current-induced magnetization switching or tunneling magnetoresistance. Nevertheless, the potential applications of magnetic skyrmions in FGaT systems at room temperature remain unexplored. In this work, the current-induced generation of magnetic skyrmions in FGaT flakes employing high-resolution magnetic transmission soft X-ray microscopy is introduced, supported by a feasible mechanism based on thermal effects. Furthermore, direct observation of the current-induced magnetic skyrmion motion at room temperature in FGaT flakes is presented with ultra-low threshold current density. This work highlights the potential of FGaT as a foundation for room-temperature-operating 2D skyrmion device applications.

Magnetic Skyrmions above Room Temperature in a van der Waals Ferromagnet Fe3GaTe2

2D van der Waals (vdW) ferromagnetic crystals are a promising platform for innovative spintronic devices based on magnetic skyrmions, thanks to their high flexibility and atomic thickness stability. However, room-temperature skyrmion-hosting vdW materials are scarce, which poses a challenge for practical applications. In this study, a chemical vapor transport (CVT) approach is employed to synthesize Fe3GaTe2 crystals and room-temperature Néel skyrmions are observed in Fe3GaTe2 nanoflakes above 58 nm in thickness through in situ Lorentz transmission electron microscopy (L-TEM). Upon an optimized field cooling procedure, zero-field hexagonal skyrmion lattices are successfully generated in nanoflakes with an extended thickness range (30-180 nm). Significantly, these skyrmion lattices remain stable up to 355 K, setting a new record for the highest temperature at which skyrmions can be hosted. The research establishes Fe3GaTe2 as an emerging above-room-temperature skyrmion-hosting vdW material, holding great promise for future spintronics.

Switching Intrinsic Magnetic Skyrmions with Controllable Magnetic Anisotropy in van der Waals Multiferroic Heterostructures

Magnetic skyrmions, topologically nontrivial whirling spin textures at nanometer scales, have emerged as potential information carriers for spintronic devices. The ability to efficiently create and erase magnetic skyrmions is vital yet challenging for such applications. Based on first-principles studies, we find that switching between intrinsic magnetic skyrmion and high-temperature ferromagnetic states can be achieved in the two-dimensional van der Waals (vdW) multiferroic heterostructure CrSeI/In2Te3 by reversing the ferroelectric polarization of In2Te3. The core mechanism of this switching is traced to the controllable magnetic anisotropy of CrSeI influenced by the ferroelectric polarization of In2Te3. We propose a useful descriptor linking the presence of magnetic skyrmions to magnetic parameters and validate this connection through studies of a variety of similar vdW multiferroic heterostructures. Our work demonstrates that manipulating magnetic skyrmions via tunable magnetic anisotropies in vdW multiferroic heterostructures represents a highly promising and energy-efficient strategy for the future development of spintronics.

Proposal for All-Electrical Skyrmion Detection in van der Waals Tunnel Junctions

A major challenge for magnetic skyrmions in atomically thin van der Waals (vdW) materials is reliable skyrmion detection. Here, based on rigorous first-principles calculations, we show that all-electrical skyrmion detection is feasible in two-dimensional vdW magnets via scanning tunneling microscopy (STM) and in planar tunnel junctions. We use the nonequilibrium Green's function method for quantum transport in planar junctions, including self-energy due to electrodes and working conditions, going beyond the standard Tersoff-Hamann approximation. We obtain a very large tunneling anisotropic magnetoresistance (TAMR) around the Fermi energy for a graphite/Fe3GeTe2/germanene/graphite vdW tunnel junction. For atomic-scale skyrmions, the noncollinear magnetoresistance (NCMR) reaches giant values. We trace the origin of the NCMR to spin mixing between spin-up and -down states of pz and dz2 character at the surface atoms. Both TAMR and NCMR are drastically enhanced in tunnel junctions with respect to STM geometry due to orbital symmetry matching at the interface.

Re-emerging magnetic order in correlated van der Waals antiferromagnet NiPS3

Van der Waals (vdW) gap is a significant feature that distinguishes vdW magnets from traditional magnets. Manipulating the magnetic properties by changing the vdW gap has been hot topic in condensed matter research. Here we report a re-emerging magnetic order induced by pressure in a correlated vdW antiferromagnetic insulator NiPS3. It is found that the interlayer magnetoresistance (MR) nearly vanishes at the critical pressure where the crystal structure transforms fromC2/mphase to the slidingC2/mphase. On further compression within the slidingC2/mphase, a substantially enhanced MR emerges from low temperature associated with an insulator-to-metal transition, indicating a metallic antiferromagnetic phase. The enhanced re-emerging MR in slidingC2/mphase can be ascribed to the increasing magnetic interaction between neighboring layers due to the vdW gap narrowing. Our results provide important experimental clues for understanding the pressure effects on magnetism in correlated layered materials.

Raman Shifts in Two-Dimensional van der Waals Magnets Reveal Magnetic Texture Evolution

Two-dimensional (2D) van der Waals magnets comprise rich physics that can be exploited for spintronic applications. We investigate the interplay between spin-phonon coupling and spin textures in a 2D van der Waals magnet by combining magneto-Raman spectroscopy with cryogenic Lorentz transmission electron microscopy. We find that when stable skyrmion bubbles are formed in the 2D magnet, a field-dependent Raman shift can be observed, and this shift is absent for the 2D magnet prepared in its ferromagnetic state. Correlating these observations with numerical simulations that take into account field-dependent magnetic textures and spin--phonon coupling in the 2D magnet, we associate the Raman shift to field-induced modulations of the skyrmion bubbles and derive the existence of inhomogeneity in the skyrmion textures over the film thickness.

In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials

Solid-state phase transformation is an intriguing phenomenon in crystalline or noncrystalline solids due to the distinct physical and chemical properties that can be obtained and modified by phase engineering. Compared to bulk solids, nanomaterials exhibit enhanced capability for phase engineering due to their small sizes and high surface-to-volume ratios, facilitating various emerging applications. To establish a comprehensive atomistic understanding of phase engineering, in situ transmission electron microscopy (TEM) techniques have emerged as powerful tools, providing unprecedented atomic-resolution imaging, multiple characterization and stimulation mechanisms, and real-time integrations with various external fields. In this Review, we present a comprehensive overview of recent advances in in situ TEM studies to characterize and modulate nanomaterials for phase transformations under different stimuli, including mechanical, thermal, electrical, environmental, optical, and magnetic factors. We briefly introduce crystalline structures and polymorphism and then summarize phase stability and phase transformation models. The advanced experimental setups of in situ techniques are outlined and the advantages of in situ TEM phase engineering are highlighted, as demonstrated via several representative examples. Besides, the distinctive properties that can be obtained from in situ phase engineering are presented. Finally, current challenges and future research opportunities, along with their potential applications, are suggested.

Lightning the Spin: Harnessing the Potential of 2D Magnets in Opto-Spintronics

Since the emergence of 2D magnets in 2017, the diversity of these materials has greatly expanded. Their 2D nature (atomic-scale thickness) endows these magnets with strong magnetic anisotropy, layer-dependent and switchable magnetic order, and quantum-confined quasiparticles, which distinguish them from conventional 3D magnetic materials. Moreover, the 2D geometry facilitates light incidence for opto-spintronic applications and potential on-chip integration. In analogy to optoelectronics based on optical-electronic interactions, opto-spintronics use light-spin interactions to process spin information stored in the solid state. In this review, opto-spintronics is divided into three types with respect to the wavelengths of radiation interacting with 2D magnets: 1) GHz (microwave) to THz (mid-infrared), 2) visible, and 3) UV to X-rays. It is focused on the recent research advancements on the newly discovered mechanisms of light-spin interactions in 2D magnets and introduces the potential design of novel opto-spintronic applications based on these interactions.

Ferroic Phases in Two-Dimensional Materials

Two-dimensional (2D) ferroics, namely ferroelectric, ferromagnetic, and ferroelastic materials, are attracting rising interest due to their fascinating physical properties and promising functional applications. A variety of 2D ferroic phases, as well as 2D multiferroics and the novel 2D ferrovalleytronics/ferrotoroidics, have been recently predicted by theory, even down to the single atomic layers. Meanwhile, some of them have already been experimentally verified. In addition to the intrinsic 2D ferroics, appropriate stacking, doping, and defects can also artificially regulate the ferroic phases of 2D materials. Correspondingly, ferroic ordering in 2D materials exhibits enormous potential for future high density memory devices, energy conversion devices, and sensing devices, among other applications. In this paper, the recent research progresses on 2D ferroic phases are comprehensively reviewed, with emphasis on chemistry and structural origin of the ferroic properties. In addition, the promising applications of the 2D ferroics for information storage, optoelectronics, and sensing are also briefly discussed. Finally, we envisioned a few possible pathways for the future 2D ferroics research and development. This comprehensive overview on the 2D ferroic phases can provide an atlas for this field and facilitate further exploration of the intriguing new materials and physical phenomena, which will generate tremendous impact on future functional materials and devices.

Recent advances in 2D van der Waals magnets: Detection, modulation, and applications

The emergence of two-dimensional (2D) van der Waals magnets provides an exciting platform for exploring magnetism in the monolayer limit. Exotic quantum phenomena and significant potential for spintronic applications are demonstrated in 2D magnetic crystals and heterostructures, which offer unprecedented possibilities in advanced formation technology with low power and high efficiency. In this review, we summarize recent advances in 2D van der Waals magnetic crystals. We focus mainly on van der Waals materials of truly 2D nature with intrinsic magnetism. The detection methods of 2D magnetic materials are first introduced in detail. Subsequently, the effective strategies to modulate the magnetic behavior of 2D magnets (e.g., Curie temperature, magnetic anisotropy, magnetic exchange interaction) are presented. Then, we list the applications of 2D magnets in the spintronic devices. We also highlight current challenges and broad space for the development of 2D magnets in further studies.

Controllable Skyrmionic Phase Transition between Néel Skyrmions and Bloch Skyrmionic Bubbles in van der Waals Ferromagnet Fe3-δ GeTe2

The van der Waals (vdW) ferromagnet Fe3-δ GeTe2 has garnered significant research interest as a platform for skyrmionic spin configurations, that is, skyrmions and skyrmionic bubbles. However, despite extensive efforts, the origin of the Dzyaloshinskii-Moriya interaction (DMI) in Fe3-δ GeTe2 remains elusive, making it challenging to acquire these skyrmionic phases in a controlled manner. In this study, it is demonstrated that the Fe content in Fe3-δ GeTe2 has a profound effect on the crystal structure, DMI, and skyrmionic phase. For the first time, a marked increase in Fe atom displacement with decreasing Fe content is observed, transforming the original centrosymmetric crystal structure into a non-centrosymmetric symmetry, leading to a considerable DMI. Additionally, by varying the Fe content and sample thickness, a controllable transition between Néel-type skyrmions and Bloch-type skyrmionic bubbles is achieved, governed by a delicate interplay between dipole-dipole interaction and the DMI. The findings offer novel insights into the variable skyrmionic phases in Fe3-δ GeTe2 and provide the impetus for developing vdW ferromagnet-based spintronic devices.

Stabilization and adiabatic control of antiferromagnetically coupled skyrmions without the topological Hall effect

Synthetic antiferromagnetically coupled (SAF) multilayers provide different physics of stabilizing skyrmions while eliminating the topological Hall effect (THE), enabling efficient and stable control. The effects of material parameters, external current drive, and a magnetic field on the skyrmion equilibrium and propagation characteristics are largely unresolved. Here, we present a computational and theoretical demonstration of the large window of material parameters that stabilize SAF skyrmions determined by saturation magnetization, uniaxial anisotropy, and Dzyaloshinskii-Moriya interaction. Current-driven SAF skyrmion velocities reach ∼200 m s-1 without the THE. The SAF velocities are about 3-10 times greater than the typical ferromagnetic skyrmion velocities. The current densities needed for driving SAF skyrmions could be reduced to 108 A m-2, while 1011 A m-2 or above is needed for ferromagnetic skyrmions. By reducing the SAF skyrmion drive current by 3 orders, Joule heating is reduced by 6 orders of magnitude. These results pave the way for new SAF interfaces with improved equilibrium, dynamics, and power savings in THE-free skyrmionics.

Proximity-Induced Tunable Magnetic Order at the Interface of All-van der Waals-Layered Heterostructures

Spin-orbit coupling (SOC) plays a crucial role in controlling the spin-charge conversion efficiency, spin torque, and complex magnetic spin structures. In this study, we investigate the interplay between SOC and ferromagnetism in heterostructures of large-SOC and magnetic materials. We highlight the importance of the SOC-proximity effect on magnetic ordering in all-van der Waals-layered heterostructures, specifically Fe3GeTe2(FGT)/monolayer W1-xVxSe2 (x = 0 and 0.05). By increasing the SOC strength, we demonstrate various magnetic orderings induced at the interface of the heterostructure, including spin-flop, spin-flip, and inverted magnetization. Moreover, we show a sharp magnetic switching from antiferromagnetic state to ferromagnetic state in FGT/W0.95V0.05Se2, which is characteristic of the synthetic antiferromagnetic structure. This proof-of-concept result offers the possibility of interface-tailoring spintronics, including two-dimensional magnetoresistive random access memory toggle switching. Our findings provide insight into the design and development of next-generation spintronic devices by exploiting the interplay between SOC and magnetic ordering in all-van der Waals-layered heterostructures.

Vacancy-plane-mediated exfoliation of sub-monolayer 2D pyrrhotite

Conventional exfoliation exploits the anisotropy in bonding or compositional character to delaminate 2D materials with large lateral size and atomic thickness. This approach, however, limits the choice to layered host crystals with a specific composition. Here, we demonstrate the exfoliation of a crystal along planes of ordered vacancies as a novel route toward previously unattainable 2D crystal structures. Pyrrhotite, a non-stoichiometric iron sulfide, was utilized as a prototype system due to its complex vacancy superstructure. Bulk pyrrhotite crystals were synthesized by gas-assisted bulk conversion, and their diffraction pattern revealed a 4C superstructure with 3 vacancy interfaces within the unit cell. Electrochemical intercalation and subsequent delamination yield ultrathin 2D flakes with a large lateral extent. Atomic force microscopy confirms that exfoliation occurs at all three supercell interfaces, resulting in the isolation of 2D structures with sub-unit cell thicknesses of 1/2 and 1/4 monolayers. The impact of controlling the morphology of 2D materials below the monolayer limit on 2D magnetic properties was investigated. Bulk pyrrhotite was shown to exhibit ferrimagnetic ordering that agrees with theoretical predictions and that is retained after exfoliation. A complex magnetic domain structure and an enhanced impact of vacancy planes on magnetization emphasize the potential of our synthesis approach as a powerful platform for modulating magnetic properties in future electronics and spintronics.

Manipulation and Optical Detection of Artificial Topological Phenomena in 2D Van der Waals Fe5 GeTe2 /MnPS3 Heterostructures

2D ferromagnet is a good platform to investigate topological effects and spintronic devices owing to its rich spin structures and excellent external-field tunability. The appearance of the topological Hall Effect (THE) is often regarded as an important sign of the generation of chiral spin textures, like magnetic vortexes or skyrmions. Here, interface engineering and an in-plane current are used to modulate the magnetic properties of the nearly room-temperature 2D ferromagnet Fe5 GeTe2 . An artificial topology phenomenon is observed in the Fe5 GeTe2 /MnPS3 heterostructure by using both anomalous Hall Effect and reflective magnetic circular dichroism (RMCD) measurements. Through tuning the applied current and the RMCD laser wavelength, the amplitude of the humps and dips observed in the hysteresis loops can be modulated accordingly. Magnetic field-dependent hysteresis loops demonstrate that the observed artificial topological phenomena are induced by the generation and annihilation of the magnetic domains. This work provides an optical method for investigating the topological-like effects in magnetic structures and proposes an effective way to modulate the magnetic properties of magnetic materials, which is important for developing magnetic and spintronic devices in van der Waals magnetic materials.

2D Ferroic Materials for Nonvolatile Memory Applications

The emerging nonvolatile memory technologies based on ferroic materials are promising for producing high-speed, low-power, and high-density memory in the field of integrated circuits. Long-range ferroic orders observed in 2D materials have triggered extensive research interest in 2D magnets, 2D ferroelectrics, 2D multiferroics, and their device applications. Devices based on 2D ferroic materials and heterostructures with an atomically smooth interface and ultrathin thickness have exhibited impressive properties and significant potential for developing advanced nonvolatile memory. In this context, a systematic review of emergent 2D ferroic materials is conducted here, emphasizing their recent research on nonvolatile memory applications, with a view to proposing brighter prospects for 2D magnetic materials, 2D ferroelectric materials, 2D multiferroic materials, and their relevant devices.

Recent Advances in 2D Material Theory, Synthesis, Properties, and Applications

Two-dimensional (2D) material research is rapidly evolving to broaden the spectrum of emergent 2D systems. Here, we review recent advances in the theory, synthesis, characterization, device, and quantum physics of 2D materials and their heterostructures. First, we shed insight into modeling of defects and intercalants, focusing on their formation pathways and strategic functionalities. We also review machine learning for synthesis and sensing applications of 2D materials. In addition, we highlight important development in the synthesis, processing, and characterization of various 2D materials (e.g., MXnenes, magnetic compounds, epitaxial layers, low-symmetry crystals, etc.) and discuss oxidation and strain gradient engineering in 2D materials. Next, we discuss the optical and phonon properties of 2D materials controlled by material inhomogeneity and give examples of multidimensional imaging and biosensing equipped with machine learning analysis based on 2D platforms. We then provide updates on mix-dimensional heterostructures using 2D building blocks for next-generation logic/memory devices and the quantum anomalous Hall devices of high-quality magnetic topological insulators, followed by advances in small twist-angle homojunctions and their exciting quantum transport. Finally, we provide the perspectives and future work on several topics mentioned in this review.

Ultrafast Laser Control of Antiferromagnetic-Ferrimagnetic Switching in Two-Dimensional Ferromagnetic Semiconductor Heterostructures

Realizing ultrafast control of magnetization switching is of crucial importance for information processing and recording technology. Here, we explore the laser-induced spin electron excitation and relaxation dynamics processes of CrCl₃/CrBr₃ heterostructures with antiparallel (AP) and parallel (P) systems. Although an ultrafast demagnetization of CrCl₃ and CrBr₃ layers occurs in both AP and P systems, the overall magnetic order of the heterostructure remains unchanged due to the laser-induced equivalent interlayer spin electron excitation. More crucially, the interlayer magnetic order switches from antiferromagnetic (AFM) to ferrimagnetic (FiM) in the AP system once the laser pulse disappears. The microscopic mechanism underpinning this magnetization switching is dominated by the asymmetrical interlayer charge transfer combined with a spin-flip, which breaks the interlayer AFM symmetry and ultimately results in an inequivalent shift in the moment between two FM layers. Our study opens up a new idea for ultrafast laser control of magnetization switching in two-dimensional opto-spintronic devices.

Room-Temperature Intrinsic Ferromagnetic Chromium Tellurium Compounds with Thickness-Tunable Magnetic Texture

2D ferromagnetic chromium tellurides exhibit intriguing spin configurations and high-temperature intrinsic ferromagnetism, providing unprecedented opportunities to explore the fundamental spin physics and build spintronic devices. Here, a generic van der Waals epitaxial approach is developed to synthesize the 2D ternary chromium tellurium compounds with thicknesses down to mono-, bi-, tri-, and few-unit cells (UC). The Mn_0.14 Cr_0.86 Te evolves from intrinsic ferromagnetic behavior in bi-UC, tri-UC, and few-UC to temperature-induced ferrimagnetic behavior as the thickness increases, resulting in a sign reversal of the anomalous Hall resistance. Temperature- and thickness-tunable labyrinthine-domain ferromagnetic behaviors are derived from the dipolar interactions in Fe_0.26 Cr_0.74 Te and Co_0.40 Cr_0.60 Te. Furthermore, the dipolar-interaction-induced stripe domain and field-induced domain wall (DW) motion velocity are studied, and multibit data storage is realized through an abundant DW state. The magnetic storage can function in neuromorphic computing tasks, and the pattern recognition accuracy can reach up to 97.93%, which is similar to the recognition accuracy of ideal software-based training (98.28%). Room-temperature ferromagnetic chromium tellurium compounds with intriguing spin configurations can significantly promote the exploration of the processing, sensing, and storage based on 2D magnetic systems.

Coexistence of Merons with Skyrmions in the Centrosymmetric Van Der Waals Ferromagnet Fe5- x GeTe2

Fe_{5- x} GeTe₂ is a centrosymmetric, layered van der Waals (vdW) ferromagnet that displays Curie temperatures T_c (270-330 K) that are within the useful range for spintronic applications. However, little is known about the interplay between its topological spin textures (e.g., merons, skyrmions) with technologically relevant transport properties such as the topological Hall effect (THE) or topological thermal transport. Here, via high-resolution Lorentz transmission electron microscopy, it is shown that merons and anti-meron pairs coexist with Néel skyrmions in Fe_{5- x} GeTe₂ over a wide range of temperatures and probe their effects on thermal and electrical transport. A THE is detected, even at room T, that senses merons at higher T's, as well as their coexistence with skyrmions as T is lowered, indicating an on-demand thermally driven formation of either type of spin texture. Remarkably, an unconventional THE is also observed in absence of Lorentz force, and it is attributed to the interaction between charge carriers and magnetic field-induced chiral spin textures. These results expose Fe_5-x GeTe₂ as a promising candidate for the development of applications in skyrmionics/meronics due to the interplay between distinct but coexisting topological magnetic textures and unconventional transport of charge/heat carriers.

Seeding and Emergence of Composite Skyrmions in a van der Waals Magnet

Topological charge plays a significant role in a range of physical systems. In particular, observations of real-space topological objects in magnetic materials have been largely limited to skyrmions - states with a unitary topological charge. Recently, more exotic states with varying topology, such as antiskyrmions, merons, or bimerons and 3D states such as skyrmion strings, chiral bobbers, and hopfions, have been experimentally reported. Along these lines, the realization of states with higher-order topology has the potential to open new avenues of research in topological magnetism and its spintronic applications. Here, real-space imaging of such spin textures, including skyrmion, skyrmionium, skyrmion bag, and skyrmion sack states, observed in exfoliated flakes of the van der Waals magnet Fe3-x GeTe2 (FGT) is reported. These composite skyrmions may emerge from seeded, loop-like states condensed into the stripe domain structure, demonstrating the possibility to realize spin textures with arbitrary integer topological charge within exfoliated flakes of 2D magnets. The general nature of the formation mechanism motivates the search for composite skyrmion states in both well-known and new magnetic materials, which may yet reveal an even richer spectrum of higher-order topological objects.

Mirroring Skyrmions in Synthetic Antiferromagnets via Modular Design

Skyrmions are promising for the next generation of spintronic devices, which involves the production and transfer of skyrmions. The creation of skyrmions can be realized by a magnetic field, electric field, or electric current while the controllable transfer of skyrmions is hindered by the skyrmion Hall effect. Here, we propose utilizing the interlayer exchange coupling induced by the Ruderman-Kittel-Kasuya-Yoshida interactions to create skyrmions through hybrid ferromagnet/synthetic antiferromagnet structures. An initial skyrmion in ferromagnetic regions could create a mirroring skyrmion with an opposite topological charge in antiferromagnetic regions driven by the current. Furthermore, the created skyrmions could be transferred in synthetic antiferromagnets without deviations away from the main trajectories due to the suppression of the skyrmion Hall effect in comparison to the transfer of the skyrmion in ferromagnets. The interlayer exchange coupling can be tuned, and the mirrored skyrmions can be separated when they reach the desired locations. Using this approach, the antiferromagnetic coupled skyrmions can be repeatedly created in hybrid ferromagnet/synthetic antiferromagnet structures. Our work not only supplies a highly efficient approach to create isolated skyrmions and correct the errors in the process of skyrmion transport, but also paves the way to a vital information writing technique based on the motion of skyrmions for skyrmion-based data storage and logic devices.

Significant enhancement of ferromagnetism above room temperature in epitaxial 2D van der Waals ferromagnet Fe5-δGeTe2/Bi2Te3 heterostructures

Two-dimensional (2D) van der Waals (vdW) ferromagnetic metals Fe_xGeTe₂ with x = 3-5 have raised significant interest in the scientific community. Fe₅GeTe₂ shows prospects for spintronic applications since the Curie temperature T_c has been reported near or higher than 300 K. In the present work, epitaxial Fe_5-δGeTe₂ (FGT) heterostructures were grown by Molecular Beam Epitaxy (MBE) on insulating crystalline substrates. The FGT films were combined with Bi₂Te₃ topological insulator (TI) aiming to investigate the possible beneficial effect of the TI on the magnetic properties of FGT. FGT/Bi₂Te₃ films were compared to FGT capped only with AlO_x to prevent oxidation. SQUID and MOKE measurements revealed that the growth of Bi₂Te₃ TI on FGT films significantly enhances the saturation magnetization of FGT as well as the T_c well above room temperature (RT) reaching record values of 570 K. First-principles calculations predict a shift of the Fermi level and an associated enhancement of the majority spin (primarily) as well as the total density of states at the Fermi level suggesting that effective doping of FGT from Bi₂Te₃ could explain the enhancement of ferromagnetism in FGT. It is also predicted that strain induced stabilization of a high magnetic moment phase in FGT/Bi₂Te₃ could be an alternative explanation of magnetization and T_c enhancement. Ferromagnetic resonance measurements evidence an enhanced broadening in the FGT/Bi₂Te₃ heterostructure when compared to FGT. We obtain a large spin mixing conductance of g↑↓eff = 4.4 × 10²⁰ m^-2, which demonstrates the great potential of FGT/Bi₂Te₃ systems for spin-charge conversion applications at room temperature.

Multiple Topological Magnetism in van der Waals Heterostructure of MnTe2/ZrS2

Topological magnetism in low-dimensional systems is of fundamental and practical importance in condensed-matter physics and material science. Here, using first-principles and Monte Carlo simulations, we present that multiple topological magnetism (i.e., skyrmion and bimeron) can survive in van der Waals heterostructure MnTe₂/ZrS₂. Arising from interlayer coupling, MnTe₂/ZrS₂ can harbor a large Dzyaloshinskii-Moriya interaction. This, combined with exchange interaction, yields an intriguing skyrmion phase under a tiny magnetic field of 75 mT. Meanwhile, upon harnessing a small electric field, magnetic bimeron can be observed in MnTe₂/ZrS₂, suggesting the existence of multiple topological magnetism. Through interlayer sliding, both topological magnetisms can be switched on-off. In addition, the impacts of d_∥ and K_eff on these spin textures are revealed, and a dimensionless parameter κ is utilized to describe their joint effect. These explored phenomena and insights not only are useful for fundamental research in topological magnetism but also enable novel applications in nanodevices.

Room-Temperature Magnetic Skyrmions and Large Topological Hall Effect in Chromium Telluride Engineered by Self-Intercalation

Room-temperature magnetic skyrmion materials exhibiting robust topological Hall effect (THE) are crucial for novel nano-spintronic devices. However, such skyrmion-hosting materials are rare in nature. In this study, a self-intercalated transition metal dichalcogenide Cr_{1+ x} Te₂ with a layered crystal structure that hosts room-temperature skyrmions and exhibits large THE is reported. By tuning the self-intercalate concentration, a monotonic control of Curie temperature from 169 to 333 K and a magnetic anisotropy transition from out-of-plane to the in-plane configuration are achieved. Based on the intercalation engineering, room-temperature skyrmions are successfully created in Cr_1.53 Te₂ with a Curie temperature of 295 K and a relatively weak perpendicular magnetic anisotropy. Remarkably, a skyrmion-induced topological Hall resistivity as large as ≈106 nΩ cm is observed at 290 K. Moreover, a sign reversal of THE is also found at low temperatures, which can be ascribed to other topological spin textures having an opposite topological charge to that of the skyrmions. Therefore, chromium telluride can be a new paradigm of the skyrmion material family with promising prospects for future device applications.

Thickness-Tunable Growth of Composition-Controllable Two-Dimensional FexGeTe2

Two-dimensional (2D) magnetic materials provide an ideal platform for investigating novel magnetism and spin behavior in low-dimensional systems while being restricted by the deficiency of accurate bottom-up synthesis. To overcome this difficulty, a facile and universal flux-assisted growth (FAG) method is proposed to synthesize the multicomponent Fe_xGeTe₂ (x = 3-5) with different Fe contents and even alloyed with hetero metal atoms. This one-to-one method ensures the stoichiometry consistency from the Fe_xGeTe₂ and M_yFe_5-yGeTe₂ (M = Co, Ni) bulk crystal precursors to the 2D nanosheets, with controllable composition. Tuning the growth temperatures can provide thickness-tunable products. Changeable magnetic properties of Fe_xGeTe₂ and alloyed Co_yFe_5-yGeTe₂ are substantiated by the superconducting quantum interference device and reflective magnetic circular dichroism. This method generates thickness-tunable high-crystallinity Fe_xGeTe₂ samples without phase separation and exhibits a high tolerance to different substrates and a large temperature window, providing a new avenue to synthesize and explore such multicomponent 2D magnets and even the alloyed ones.

Cascadable in-memory computing based on symmetric writing and readout

The building block of in-memory computing with spintronic devices is mainly based on the magnetic tunnel junction with perpendicular interfacial anisotropy (p-MTJ). The resulting asymmetric write and readout operations impose challenges in downscaling and direct cascadability of p-MTJ devices. Here, we propose that a previously unimplemented symmetric write and readout mechanism can be realized in perpendicular-anisotropy spin-orbit (PASO) quantum materials based on Fe3GeTe2 and WTe2. We demonstrate that field-free and deterministic reversal of the perpendicular magnetization can be achieved using unconventional charge-to-z-spin conversion. The resulting magnetic state can be readily probed with its intrinsic inverse process, i.e., z-spin-to-charge conversion. Using the PASO quantum material as a fundamental building block, we implement the functionally complete set of logic-in-memory operations and a more complex nonvolatile half-adder logic function. Our work highlights the potential of PASO quantum materials for the development of scalable energy-efficient and ultrafast spintronic computing.

Integrated Memory Devices Based on 2D Materials

With the advent of the Internet of Things and big data, massive data must be rapidly processed and stored within a short timeframe. This imposes stringent requirements on memory hardware implementation in terms of operation speed, energy consumption, and integration density. To fulfill these demands, 2D materials, which are excellent electronic building blocks, provide numerous possibilities for developing advanced memory device arrays with high performance, smart computing architectures, and desirable downscaling. Over the past few years, 2D-material-based memory-device arrays with different working mechanisms, including defects, filaments, charges, ferroelectricity, and spins, have been increasingly developed. These arrays can be used to implement brain-inspired computing or sensing with extraordinary performance, architectures, and functionalities. Here, recent research into integrated, state-of-the-art memory devices made from 2D materials, as well as their implications for brain-inspired computing are surveyed. The existing challenges at the array level are discussed, and the scope for future research is presented.

2D Magnetic Semiconductor Fe3GeTe2 with Few and Single Layers with a Greatly Enhanced Intrinsic Exchange Bias by Liquid-Phase Exfoliation

A 2D van der Waals (vdW) magnet can get rid of the constraints of lattice matching and compatibility and then create a variety of vdW heterostructures, which provides a opportunity for spintronic devices. However, the ability to reliably exfoliate large, high-quality vdW ferromagnetic Fe₃GeTe₂ (FGT) nanoflakes in scaled-up production is severely limited. Herein, an efficient and stable three-stage sonication-assisted liquid-phase exfoliation was developed for mass preparation of high-structural-integrity few- and single-layer FGT nanoflakes with a greatly enhanced intrinsic exchange bias. The three stages include slicing crystals, weakening interlayer vdW forces, and using ultrasonic cavitation. The highest yield of FGT nanoflakes is 22.3 wt % with single layers accounting for 6%. The size is controllable, and several micrometers, tens of micrometers, and a maximum of 103 μm are available. The 200 mg level output has overcome the limitations of mechanical exfoliation and molecular beam epitaxy in economically amplificated production. An intrinsic exchange bias is observed in the restacked nanoflakes due to the magnetic proximity on the interface of the FGT/natural surface oxide layer. The material reaches 578 Oe (2 K) and 2300 Oe after further oxidation, at least 250% higher than other precisely tailored vdW magnetic heterostructures. In addition, the unusual semiconductivity of the liquid-phase exfoliated FGT nanoflakes is reported. This work skillfully utilizes oxidation to enhance the potential of FGT for large-scale spintronics, optoelectronics, efficient data storage, and various extended applications, and it is beneficial for exfoliating other promising magnetic vdW materials.