A solid-state source of strongly entangled photon pairs with high brightness and indistinguishability

All-Epitaxial Self-Assembly of Silicon Color Centers Confined Within Sub-Nanometer Thin Layers Using Ultra-Low Temperature Epitaxy

Silicon-based color-centers (SiCCs) have recently emerged as quantum-light sources that can be combined with telecom-range Si Photonics platforms. Unfortunately, using conventional SiCC fabrication schemes, deterministic control over the vertical emitter position is impossible due to the stochastic nature of the required ion-implantation(s). To overcome this bottleneck toward high-yield integration, a radically innovative creation method is demonstrated for various SiCCs with excellent optical quality, solely relying on the epitaxial growth of Si and C-doped Si at atypically-low temperatures in an ultra-clean growth environment. These telecom emitters can be confined within sub-nm thick epilayers embedded within a highly crystalline Si matrix at arbitrary vertical positions. Tuning growth conditions and doping, different well-known SiCC types can be selectively created, including W-centers, T-centers, G-centers, and, especially, a so far unidentified derivative of the latter, introduced as G'-center. The zero-phonon emission from G'-centers at ≈1300 nm can be conveniently tuned by the C-concentration, leading to a systematic wavelength shift and linewidth narrowing toward low emitter densities, which makes both, the epitaxy-based fabrication and the G'-center particularly promising as integrable Si-based single-photon sources and spin-photon interfaces.

SNR analysis of a multi-channel temporal correlation scheme in quantum-enhanced target detection

In lossy and noisy environments, quantum-enhanced target detection based on temporal quantum correlation encounters low signal-to-noise ratio (SNR), resulting in poor detection performance. To address these challenges, we propose a multi-channel temporal correlation scheme. In this scheme, signal photons from multiple independent entangled sources illuminate the target and arrive at the same detector. Coincidences are obtained by correlation measurements of the entangled photons on one signal path and different reference paths. We then propose a weighted average processing method for fusing the coincidences to obtain higher SNR. The relationship between the SNR and the number of sources is analyzed for different background noise levels. It is shown that the SNR increases as the number of sources increases, but eventually approaches a limit. Experimental results verify the correction of our theoretical analysis.

Quantum dots get a bright upgrade

Developing a bright, deterministic source of entangled photon pairs has been an outstanding scientific and technological challenge. Semiconductor quantum dots are a promising candidate for this task. A new device combining a circular Bragg resonator and a piezoelectric actuator achieves high brightness and entanglement fidelity simultaneously, overcoming previous limitations. This breakthrough enhances quantum dot applications in entanglement-based quantum communication protocols.

Unveiling the 3D Morphology of Epitaxial GaAs/AlGaAs Quantum Dots

Strain-free GaAs/AlGaAs semiconductor quantum dots (QDs) grown by droplet etching and nanohole infilling (DENI) are highly promising candidates for the on-demand generation of indistinguishable and entangled photon sources. The spectroscopic fingerprint and quantum optical properties of QDs are significantly influenced by their morphology. The effects of nanohole geometry and infilled material on the exciton binding energies and fine structure splitting are well-understood. However, a comprehensive understanding of GaAs/AlGaAs QD morphology remains elusive. To address this, we employ high-resolution scanning transmission electron microscopy (STEM) and reverse engineering through selective chemical etching and atomic force microscopy (AFM). Cross-sectional STEM of uncapped QDs reveals an inverted conical nanohole with Al-rich sidewalls and defect-free interfaces. Subsequent selective chemical etching and AFM measurements further reveal asymmetries in element distribution. This study enhances the understanding of DENI QD morphology and provides a fundamental three-dimensional structural model for simulating and optimizing their optoelectronic properties.

Alice (and Bob) in Flatland

2D quantum materials have opened infinite doors, hosting intriguing phenomena and featuring incredible engineering potential. Whether these qualities can boost the use of 2D crystals for quantum applications remains an open field with yet unexplored paths.

A source of entangled photons based on a cavity-enhanced and strain-tuned GaAs quantum dot

A quantum-light source that delivers photons with a high brightness and a high degree of entanglement is fundamental for the development of efficient entanglement-based quantum-key distribution systems. Among all possible candidates, epitaxial quantum dots are currently emerging as one of the brightest sources of highly entangled photons. However, the optimization of both brightness and entanglement currently requires different technologies that are difficult to combine in a scalable manner. In this work, we overcome this challenge by developing a novel device consisting of a quantum dot embedded in a circular Bragg resonator, in turn, integrated onto a micromachined piezoelectric actuator. The resonator engineers the light-matter interaction to empower extraction efficiencies up to 0.69(4). Simultaneously, the actuator manipulates strain fields that tune the quantum dot for the generation of entangled photons with corrected fidelities to a maximally entangled state up to 0.96(1). This hybrid technology has the potential to overcome the limitations of the key rates that plague QD-based entangled sources for entanglement-based quantum key distribution and entanglement-based quantum networks.

Supplementary Information

The online version contains supplementary material available at 10.1186/s43593-024-00072-8.

Tunable quantum emitters on large-scale foundry silicon photonics

Controlling large-scale many-body quantum systems at the level of single photons and single atomic systems is a central goal in quantum information science and technology. Intensive research and development has propelled foundry-based silicon-on-insulator photonic integrated circuits to a leading platform for large-scale optical control with individual mode programmability. However, integrating atomic quantum systems with single-emitter tunability remains an open challenge. Here, we overcome this barrier through the hybrid integration of multiple InAs/InP microchiplets containing high-brightness infrared semiconductor quantum dot single photon emitters into advanced silicon-on-insulator photonic integrated circuits fabricated in a 300 mm foundry process. With this platform, we achieve single-photon emission via resonance fluorescence and scalable emission wavelength tunability. The combined control of photonic and quantum systems opens the door to programmable quantum information processors manufactured in leading semiconductor foundries.

Wavelength-tunable high-fidelity entangled photon sources enabled by dual Stark effects

The construction of a large-scale quantum internet requires quantum repeaters containing multiple entangled photon sources with identical wavelengths. Semiconductor quantum dots can generate entangled photon pairs deterministically with high fidelity. However, realizing wavelength-matched quantum-dot entangled photon sources faces two difficulties: the non-uniformity of emission wavelength and exciton fine-structure splitting induced fidelity reduction. Typically, these two factors are not independently tunable, making it challenging to achieve simultaneous improvement. In this work, we demonstrate wavelength-tunable entangled photon sources based on droplet-etched GaAs quantum dots through the combined use of AC and quantum-confined Stark effects. The emission wavelength can be tuned by ~1 meV while preserving an entanglement fidelity f exceeding 0.955(1) in the entire tuning range. Based on this hybrid tuning scheme, we finally demonstrate multiple wavelength-matched entangled photon sources with f > 0.919(3), paving the way towards robust and scalable on-demand entangled photon sources for quantum internet and integrated quantum optical circuits.

Entangled photon pair generation in an integrated SiC platform

Entanglement plays a vital role in quantum information processing. Owing to its unique material properties, silicon carbide recently emerged as a promising candidate for the scalable implementation of advanced quantum information processing capabilities. To date, however, only entanglement of nuclear spins has been reported in silicon carbide, while an entangled photon source, whether it is based on bulk or chip-scale technologies, has remained elusive. Here, we report the demonstration of an entangled photon source in an integrated silicon carbide platform for the first time. Specifically, strongly correlated photon pairs are efficiently generated at the telecom C-band wavelength through implementing spontaneous four-wave mixing in a compact microring resonator in the 4H-silicon-carbide-on-insulator platform. The maximum coincidence-to-accidental ratio exceeds 600 at a pump power of 0.17 mW, corresponding to a pair generation rate of (9 ± 1) × 103 pairs/s. Energy-time entanglement is created and verified for such signal-idler photon pairs, with the two-photon interference fringes exhibiting a visibility larger than 99%. The heralded single-photon properties are also measured, with the heralded g(2)(0) on the order of 10-3, demonstrating the SiC platform as a prospective fully integrated, complementary metal-oxide-semiconductor compatible single-photon source for quantum applications.

Multiplexed manipulation of orbital angular momentum and wavelength in metasurfaces based on arbitrary complex-amplitude control

Due to its unbounded and orthogonal modes, the orbital angular momentum (OAM) is regarded as a key optical degree of freedom (DoF) for future information processing with ultra-high capacity and speed. Although the manipulation of OAM based on metasurfaces has brought about great achievements in various fields, such manipulation currently remains at single-DoF level, which means the multiplexed manipulation of OAM with other optical DoFs is still lacking, greatly hampering the application of OAM beams and advancement of metasurfaces. In order to overcome this challenge, we propose the idea of multiplexed coherent pixel (MCP) for metasurfaces. This approach enables the manipulation of arbitrary complex-amplitude under incident lights of both plane and OAM waves, on the basis of which we have realized the multiplexed DoF control of OAM and wavelength. As a result, the MCP method expands the types of incident lights which can be simultaneously responded by metasurfaces, enriches the information processing capability of metasurfaces, and creates applications of information encryption and OAM demultiplexer. Our findings not only provide means for the design of high-security and high-capacity metasurfaces, but also raise the control and application level of OAM, offering great potential for multifunctional nanophotonic devices in the future.

Circular photonic crystal grating design for charge-tunable quantum light sources in the telecom C-band

Efficient generation of entangled photon pairs at telecom wavelengths is a key ingredient for long-range quantum networks. While embedding semiconductor quantum dots into hybrid circular Bragg gratings has proven effective, it conflicts with p-i-n diode heterostructures which offer superior coherence. We propose and analyze hybrid circular photonic crystal gratings, incorporating air holes to facilitate charge carrier transport without compromising optical properties. Through numerical simulations, a broad cavity mode with a Purcell factor of 23 enhancing both exciton and biexciton transitions, and exceptional collection efficiency of 92.4% into an objective with numerical aperture of 0.7 are achieved. Furthermore, our design demonstrates direct coupling efficiency over 90.5% into a single-mode fiber over the entire telecom C-band. The hybrid circular photonic crystal grating thereby emerges as a promising solution for the efficient generation of highly coherent, polarization-entangled photon pairs.

Engineering Quantum Light Sources with Flat Optics

Quantum light sources are essential building blocks for many quantum technologies, enabling secure communication, powerful computing, and precise sensing and imaging. Recent advancements have witnessed a significant shift toward the utilization of "flat" optics with thickness at subwavelength scales for the development of quantum light sources. This approach offers notable advantages over conventional bulky counterparts, including compactness, scalability, and improved efficiency, along with added functionalities. This review focuses on the recent advances in leveraging flat optics to generate quantum light sources. Specifically, the generation of entangled photon pairs through spontaneous parametric down-conversion in nonlinear metasurfaces, and single photon emission from quantum emitters including quantum dots and color centers in 3D and 2D materials are explored. The review covers theoretical principles, fabrication techniques, and properties of these sources, with particular emphasis on the enhanced generation and engineering of quantum light sources using optical resonances supported by nanostructures. The diverse application range of these sources is discussed and the current challenges and perspectives in the field are highlighted.

Polarization-Selective Enhancement of Telecom Wavelength Quantum Dot Transitions in an Elliptical Bullseye Resonator

Semiconductor quantum dots are promising candidates for the generation of nonclassical light. Coupling a quantum dot to a device capable of providing polarization-selective enhancement of optical transitions is highly beneficial for advanced functionalities, such as efficient resonant driving schemes or applications based on optical cyclicity. Here, we demonstrate broadband polarization-selective enhancement by coupling a quantum dot emitting in the telecom O-band to an elliptical bullseye resonator. We report bright single-photon emission with a degree of linear polarization of 96%, Purcell factor of 3.9 ± 0.6, and count rates up to 3 MHz. Furthermore, we present a measurement of two-photon interference without any external polarization filtering. Finally, we demonstrate compatibility with compact Stirling cryocoolers by operating the device at temperatures up to 40 K. These results represent an important step toward practical integration of optimal quantum dot photon sources in deployment-ready setups.

Experimental Quantum Non-Gaussian Coincidences of Entangled Photons

Quantum non-Gaussianity, a more potent and highly useful form of nonclassicality, excludes all convex mixtures of Gaussian states and Gaussian parametric processes generating them. Here, for the first time, we conclusively test quantum non-Gaussian coincidences of entangled photon pairs with the Clauser-Horne-Shimony-Holt-Bell factor S=2.328±0.004 from a single quantum dot with a depth up to 0.94±0.02  dB. Such deterministically generated photon pairs fundamentally overcome parametric processes by reducing crucial multiphoton errors. For the quantum non-Gaussian depth of the unheralded (heralded) single-photon state, we achieve the value of 8.08±0.05  dB (19.06±0.29  dB). Our Letter experimentally certifies the exclusive quantum non-Gaussianity properties highly relevant for optical sensing, communication, and computation.

Postfabrication Tuning of Circular Bragg Resonators for Enhanced Emitter-Cavity Coupling

Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum light with high brightness and low multiphoton probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial spectral mismatch can be corrected after device fabrication by repeated wet chemical etching steps. We demonstrate an ∼16 nm wavelength tuning for optical modes in AlGaAs resonators on oxide, leading to a 4-fold Purcell enhancement of the emission of single embedded GaAs quantum dots. Numerical calculations reproduce the observations and suggest that the achievable performance of the resonator is only marginally affected in the explored tuning range. We expect the method to be applicable also to circular Bragg resonators based on other material platforms, thus increasing the device yield of cavity-enhanced solid-state quantum emitters.

Polarized and Bright Telecom C-Band Single-Photon Source from InP-Based Quantum Dots Coupled to Elliptical Bragg Gratings

Bright, polarized, and high-purity single-photon sources in telecom wavelengths are crucial components in long-distance quantum communication, optical quantum computation, and quantum networks. Semiconductor InAs/InP quantum dots (QDs) combined with photonic cavities provide a competitive path, leading to optimal single-photon sources in this range. Here, we demonstrate a bright and polarized single-photon source operating in the telecom C-band based on an elliptical Bragg grating (EBG) cavity. With a significant Purcell enhancement of 5.25 ± 0.05, the device achieves a polarization ratio of 0.986, a single-photon purity of g2(0) = 0.078 ± 0.016, and a single-polarized photon collection efficiency of ∼24% at the first lens (NA = 0.65) without blinking. These findings suggest that C-band QD-based single-photon sources are potential candidates for advancing quantum communication.

Scalable Bright and Pure Single Photon Sources by Droplet Epitaxy on InP Nanowire Arrays

High-quality quantum light sources are crucial components for the implementation of practical and reliable quantum technologies. The persistent challenge, however, is the lack of scalable and deterministic single photon sources that can be synthesized reproducibly. Here, we present a combination of droplet epitaxy with selective area epitaxy to realize the deterministic growth of single quantum dots in nanowire arrays. By optimization of the single quantum dot growth and the nanowire cavity design, single emissions are effectively coupled with the dominant mode of the nanowires to realize Purcell enhancement. The resonance-enhanced quantum emitter system boasts a brightness of millions of counts per second with nanowatt excitation power, a short radiation lifetime of 350 ± 5 ps, and a high single-photon purity with g(2)(0) value of 0.05 with continuous wave above-band excitation. Finite-difference time-domain (FDTD) simulation results show that the emissions of single quantum dots are coupled into the TM01 mode of the nanowires, giving a Purcell factor ≈ 3. Our technology can be used for creating on-chip scalable single photon sources for future quantum technology applications including quantum networks, quantum computation, and quantum imaging.

Frequency conversion to the telecom O-band using pressurized hydrogen

Large-scale quantum networks rely on optical fiber networks and photons as so-called flying qubits for information transport. While dispersion and absorption of optical fibers are minimum at the infrared telecom wavelengths, most atomic and solid state platforms operate at visible or near-infrared wavelengths. Quantum frequency conversion is required to bridge these two wavelength regimes, and nonlinear crystals are currently employed for this process. Here, we report a novel approach of frequency conversion to the telecom band. This interaction is based on coherent Stokes Raman scattering (CSRS), a four-wave mixing process resonantly enhanced in a dense molecular hydrogen gas. We show the conversion of photons from 863 nm to the telecom O-band and demonstrate that the input polarization state is preserved. This process is intrinsically broadband and can be adapted to any other wavelength.

High-directivity far-field radiation of quantum dot-based single-photon emitter coupled to polymeric circular waveguide resonant grating

Solid-state single-photon emitters (SPEs) commonly encounter the limitation of quasi-omnidirectional radiation patterns, which poses challenges in utilizing their emission with conventional optical instruments. In this study, we demonstrate the tailoring of the far-field radiation patterns of SPEs based on colloidal quantum dots (QDs), both theoretically and experimentally, by employing a polymer-based dielectric antenna. We introduce a simple and cost-effective technique, namely low one-photon absorption direct laser writing, to achieve precise coupling of a QD into an all-polymer circular waveguide resonance grating. By optimizing the geometry parameters of the structure using 3D finite-difference time-domain simulations, resonance at the emission wavelength of QDs is achieved in the direction perpendicular to the substrate, resulting in photon streams with remarkably high directivity on both sides of the grating. Theoretical calculations predict beam divergence values below 2°, while experimental measurements using back focal plane imaging yield divergence angles of approximately 8°. Our study contributes to the evaluation of concentric circular grating structures employing low refractive index polymer materials, thereby expanding the possibilities for their application.

Tunable quantum dots in monolithic Fabry-Perot microcavities for high-performance single-photon sources

Cavity-enhanced single quantum dots (QDs) are the main approach towards ultra-high-performance solid-state quantum light sources for scalable photonic quantum technologies. Nevertheless, harnessing the Purcell effect requires precise spectral and spatial alignment of the QDs' emission with the cavity mode, which is challenging for most cavities. Here we have successfully integrated miniaturized Fabry-Perot microcavities with a piezoelectric actuator, and demonstrated a bright single-photon source derived from a deterministically coupled QD within this microcavity. Leveraging the cavity-membrane structures, we have achieved large spectral tunability via strain tuning. On resonance, a high Purcell factor of ~9 is attained. The source delivers single photons with simultaneous high extraction efficiency of 0.58, high purity of 0.956(2) and high indistinguishability of 0.922(4). Together with its compact footprint, our scheme facilitates the scalable integration of indistinguishable quantum light sources on-chip, therefore removing a major barrier to the development of solid-state quantum information platforms based on QDs.

Single photon emitter deterministically coupled to a topological corner state

Incorporating topological physics into the realm of quantum photonics holds the promise of developing quantum light emitters with inherent topological robustness and immunity to backscattering. Nonetheless, the deterministic interaction of quantum emitters with topologically nontrivial resonances remains largely unexplored. Here we present a single photon emitter that utilizes a single semiconductor quantum dot, deterministically coupled to a second-order topological corner state in a photonic crystal cavity. By investigating the Purcell enhancement of both single photon count and emission rate within this topological cavity, we achieve an experimental Purcell factor of Fp = 3.7. Furthermore, we demonstrate the on-demand emission of polarized single photons, with a second-order autocorrelation function g(2)(0) as low as 0.024 ± 0.103. Our approach facilitates the customization of light-matter interactions in topologically nontrivial environments, thereby offering promising applications in the field of quantum photonics.

Monolithic Polarizing Circular Dielectric Gratings on Bulk Substrates for Improved Photon Collection from InAs Quantum Dots

III-V semiconductor quantum dots (QDs) are near-ideal and versatile single-photon sources. Because of the capacity for monolithic integration with photonic structures as well as optoelectronic and optomechanical systems, they are proving useful in an increasingly broad application space. Here, we develop monolithic circular dielectric gratings on bulk substrates - as opposed to suspended or wafer-bonded substrates - for greatly improved photon collection from InAs quantum dots. The structures utilize a unique two-tiered distributed Bragg reflector (DBR) structure for vertical electric field confinement over a broad angular range. Opposing "openings" in the cavities induce strongly polarized QD luminescence without harming collection efficiencies. We describe how measured enhancements depend on the choice of collection optics. This is important to consider when evaluating the performance of any photonic structure that concentrates farfield emission intensity. Our cavity designs are useful for integrating QDs with other quantum systems that require bulk substrates, such as surface acoustic wave phonons.

Telecom-band quantum dot technologies for long-distance quantum networks

A future quantum internet is expected to generate, distribute, store and process quantum bits (qubits) over the world by linking different quantum nodes via quantum states of light. To facilitate long-haul operations, quantum repeaters must operate at telecom wavelengths to take advantage of both the low-loss optical fibre network and the established technologies of modern optical communications. Semiconductor quantum dots have thus far shown exceptional performance as key elements for quantum repeaters, such as quantum light sources and spin-photon interfaces, but only in the near-infrared regime. Therefore, the development of high-performance telecom-band quantum dot devices is highly desirable for a future solid-state quantum internet based on fibre networks. In this Review, we present the physics and technological developments towards epitaxial quantum dot devices emitting in the telecom O- and C-bands for quantum networks, considering both advanced epitaxial growth for direct telecom emission and quantum frequency conversion for telecom-band down-conversion of near-infrared quantum dot devices. We also discuss the challenges and opportunities for future realization of telecom quantum dot devices with improved performance and expanded functionality through hybrid integration.

Universal design method for bright quantum light sources based on circular Bragg grating cavities

We theoretically develop an efficient and universal design scheme of quantum light sources based on hybrid circular Bragg grating (CBG) cavity with and without electrical contact bridges. As the proposed design scheme strongly alleviates the computational cost of numerical simulation, we present high-performance CBG designs based on the GaAs/SiO2/Au material system for emission wavelengths ranging from 900 nm to 1600 nm, covering the whole telecom O-band and C-band. All designs achieve remarkable Purcell factors surpassing a value of 26 and extraction efficiencies (into a numerical aperture of 0.8) exceeding 92% without contact bridges and 86% with contact bridges. Additionally, we show that our design approach easily deals with realistic structural constraints, such as preset thicknesses of a semiconductor membrane or SiO2 layers or with a different material system. The high design flexibility greatly supports the experimental deterministic fabrication approaches, allowing one to perform in-situ design adaptation and to integrate single quantum emitters of an inhomogeneously broadened ensemble on the same chip into wavelength-adapted structures without spectral constraints, which highly increase the yield of quantum device fabrication.

Signatures of the Optical Stark Effect on Entangled Photon Pairs from Resonantly Pumped Quantum Dots

Two-photon resonant excitation of the biexciton-exciton cascade in a quantum dot generates highly polarization-entangled photon pairs in a near-deterministic way. However, the ultimate level of achievable entanglement is still debated. Here, we observe the impact of the laser-induced ac-Stark effect on the quantum dot emission spectra and on entanglement. For increasing pulse-duration-to-lifetime ratios and pump powers, decreasing values of concurrence are recorded. Nonetheless, additional contributions are still required to fully account for the observed below-unity concurrence.

Coherent control of a high-orbital hole in a semiconductor quantum dot

Coherently driven semiconductor quantum dots are one of the most promising platforms for non-classical light sources and quantum logic gates which form the foundation of photonic quantum technologies. However, to date, coherent manipulation of single charge carriers in quantum dots is limited mainly to their lowest orbital states. Ultrafast coherent control of high-orbital states is obstructed by the demand for tunable terahertz pulses. To break this constraint, we demonstrate an all-optical method to control high-orbital states of a hole via a stimulated Auger process. The coherent nature of the Auger process is proved by Rabi oscillation and Ramsey interference. Harnessing this coherence further enables the investigation of the single-hole relaxation mechanism. A hole relaxation time of 161 ps is observed and attributed to the phonon bottleneck effect. Our work opens new possibilities for understanding the fundamental properties of high-orbital states in quantum emitters and for developing new types of orbital-based quantum photonic devices.

Inverse design of a polarization demultiplexer for on-chip path-entangled photon-pair sources based on single quantum dots

Epitaxial quantum dots can emit polarization-entangled photon pairs. If orthogonal polarizations are coupled to independent paths, then the photons will be path-entangled. Through inverse design with adjoint method optimization, we design a quantum dot polarization demultiplexer, a nanophotonic geometry that efficiently couples orthogonally polarized transition dipole moments of a single quantum dot to two independent waveguides. We predict 95% coupling efficiency, cross talk less than 0.1%, and Purcell radiative rate enhancement factors over 11.5 for both dipoles, with sensitivity to dipole misalignment and orientation comparable to that of conventional nanophotonic geometries. We anticipate our design will be valuable for the implementation of triggered, high-rate sources of path-entangled photon-pairs on chip.

Culling a Self-Assembled Quantum Dot as a Single-Photon Source Using X-ray Microscopy

Epitaxially grown self-assembled semiconductor quantum dots (QDs) with atom-like optical properties have emerged as the best choice for single-photon sources required for the development of quantum technology and quantum networks. Nondestructive selection of a single QD having desired structural, compositional, and optical characteristics is essential to obtain noise-free, fully indistinguishable single or entangled photons from single-photon emitters. Here, we show that the structural orientations and local compositional inhomogeneities within a single QD and the surrounding wet layer can be probed in a screening fashion by scanning X-ray diffraction microscopy and X-ray fluorescence with a few tens of nanometers-sized synchrotron radiation beam. The presented measurement protocol can be used to cull the best single QD from the enormous number of self-assembled dots grown simultaneously. The obtained results show that the elemental composition and resultant strain profiles of a QD are sensitive to in-plane crystallographic directions. We also observe that lattice expansion after a certain composition-limit introduces shear strain within a QD, enabling the possibility of controlled chiral-QD formation. Nanoscale chirality and compositional anisotropy, contradictory to common assumptions, need to be incorporated into existing theoretical models to predict the optical properties of single-photon sources and to further tune the epitaxial growth process of self-assembled quantum structures.

On-chip generation of single-photon circularly polarized single-mode vortex beams

Generation of single photons carrying spin and orbital angular momenta (SAM and OAM) opens enticing perspectives for exploiting multiple degrees of freedom for high-dimensional quantum systems. However, on-chip generation of single photons encoded with single-mode SAM-OAM states has been a major challenge. Here, by using carefully designed anisotropic nanodimers fabricated atop a substrate, supporting surface plasmon polariton (SPP) propagation, and accurately positioned around a quantum emitter (QE), we enable nonradiative QE-SPP coupling and the SPP outcoupling into free-space propagating radiation featuring the designed SAM and OAM. We demonstrate on-chip room-temperature generation of well-collimated (divergence < 7.5°) circularly polarized (chirality > 0.97) single-mode vortex beams with different topological charges (𝓁 = 0, 1, and 2) and high single-photon purity, g(2)(0) < 0.15. The developed approach can straightforwardly be extended to produce multiple, differently polarized, single-mode single-photon radiation channels and enable thereby realization of high-dimensional quantum sources for advanced quantum photonic technologies.

Independent Electrical Control of Two Quantum Dots Coupled through a Photonic-Crystal Waveguide

Efficient light-matter interaction at the single-photon level is of fundamental importance in emerging photonic quantum technology. A fundamental challenge is addressing multiple quantum emitters at once, as intrinsic inhomogeneities of solid-state platforms require individual tuning of each emitter. We present the realization of two semiconductor quantum dot emitters that are efficiently coupled to a photonic-crystal waveguide and individually controllable by applying a local electric Stark field. We present resonant transmission and fluorescence spectra in order to probe the coupling of the two emitters to the waveguide. We exploit the single-photon stream from one quantum dot to perform spectroscopy on the second quantum dot positioned 16  μm away in the waveguide. Furthermore, power-dependent resonant transmission measurements reveal signatures of coherent coupling between the emitters. Our work provides a scalable route to realizing multiemitter collective coupling, which has inherently been missing for solid-state deterministic photon emitters.

Quantum secure metrology for network sensing-based applications

Quantum secure metrology protocols harness quantum effects to probe remote systems with enhanced precision and security. Traditional QSM protocols require multi-partite entanglement, which limits its near-term implementation due to technological constraints. This paper proposes a QSM scheme that employs Bell pairs to provide unconditional security while offering precision scaling beyond the standard quantum limit. We provide a detailed comparative performance analysis of our proposal under multiple attacks. We found that the employed controlled encoding strategy is far better than the parallel encoding of multi-partite entangled states with regard to the secrecy of the parameter. We also identify and characterize an intrinsic trade-off relationship between the maximum achievable precision and security under the limited availability of resources. The dynamic scalability of the proposed protocol makes it suitable for large-scale network sensing scenarios.

Recent progress in quantum photonic chips for quantum communication and internet

Recent years have witnessed significant progress in quantum communication and quantum internet with the emerging quantum photonic chips, whose characteristics of scalability, stability, and low cost, flourish and open up new possibilities in miniaturized footprints. Here, we provide an overview of the advances in quantum photonic chips for quantum communication, beginning with a summary of the prevalent photonic integrated fabrication platforms and key components for integrated quantum communication systems. We then discuss a range of quantum communication applications, such as quantum key distribution and quantum teleportation. Finally, the review culminates with a perspective on challenges towards high-performance chip-based quantum communication, as well as a glimpse into future opportunities for integrated quantum networks.

Deterministic Fabrication of a Coupled Cavity-Emitter System in Hexagonal Boron Nitride

Light-matter interactions in optical cavities underpin many applications of integrated quantum photonics. Among various solid-state platforms, hexagonal boron nitride (hBN) is gaining considerable interest as a compelling van der Waals host of quantum emitters. However, progress to date has been limited by an inability to engineer simultaneously an hBN emitter and a narrow-band photonic resonator at a predetermined wavelength. Here, we overcome this problem and demonstrate deterministic fabrication of hBN nanobeam photonic crystal cavities with high quality factors over a broad spectral range (∼400 to 850 nm). We then fabricate a monolithic, coupled cavity-emitter system designed for a blue quantum emitter that has an emission wavelength of 436 nm and is induced deterministically by electron beam irradiation of the cavity hotspot. Our work constitutes a promising path to scalable on-chip quantum photonics and paves the way to quantum networks based on van der Waals materials.

Efficient generation of single photons by quantum dots embedded in bullseye cavities with backside dielectric mirrors

Single photons are pivotal building blocks for photonic quantum technologies. Semiconductor quantum dots are promising candidates for optimal single photon sources in terms of purity, brightness and indistinguishability. Here we embed quantum dots into bullseye cavities with a backside dielectric mirror to enhance the collection efficiency up to near 90%. Experimentally, we achieve a collection efficiency of 30%. The auto-correlation measurements reveal a multiphoton probability below 0.05±0.005. A moderate Purcell factor of 3.1 is observed. Furthermore, we propose a scheme for laser integration as well as fiber coupling. Our results represent a step forward to the practical plug-and-play single photon sources.

Nuclear spin diffusion in the central spin system of a GaAs/AlGaAs quantum dot

The spin diffusion concept provides a classical description of a purely quantum-mechanical evolution in inhomogeneously polarized many-body systems such as nuclear spin lattices. The central spin of a localized electron alters nuclear spin diffusion in a way that is still poorly understood. Here, spin diffusion in a single GaAs/AlGaAs quantum dot is witnessed in the most direct manner from oscillatory spin relaxation dynamics. Electron spin is found to accelerate nuclear spin relaxation, from which we conclude that the long-discussed concept of a Knight-field-gradient diffusion barrier does not apply to GaAs epitaxial quantum dots. Our experiments distinguish between non-diffusion relaxation and spin diffusion, allowing us to conclude that diffusion is accelerated by the central electron spin. Such acceleration is observed up to unexpectedly high magnetic fields - we propose electron spin-flip fluctuations as an explanation. Diffusion-limited nuclear spin lifetimes range between 1 and 10 s, which is sufficiently long for quantum information storage and processing.

High-performance designs for fiber-pigtailed quantum-light sources based on quantum dots in electrically-controlled circular Bragg gratings

We present a numerical investigation of directly fiber-coupled hybrid circular Bragg gratings (CBGs) featuring electrical control for operation in the application relevant wavelength regimes around 930 nm as well as the telecom O- and C-band. We use a surrogate model combined with a Bayesian optimization approach to perform numerical optimization of the device performance which takes into account robustness with respect to fabrication tolerances. The proposed high-performance designs combine hybrid CBGs with a dielectric planarization and a transparent contact material, enabling > 86% direct fiber coupling efficiency (> 93% efficiency into NA 0.8) while exhibiting Purcell factors > 20. Especially the proposed designs for the telecom range prove robust and can sustain expected fiber efficiencies of more than (82.2±4.1)-5.5+2.2% and expected average Purcell factors of up to (23.2±2.3)-3.0+3.2 assuming conservative fabrication accuracies. The wavelength of maximum Purcell enhancement proves to be the most affected performance parameter by the deviations. Finally, we show that electrical field strengths suitable for Stark-tuning of an embedded quantum dot can be reached in the identified designs. Our work provides blueprints for high-performance quantum light sources based on fiber-pigtailed and electrically-controlled quantum dot CBG devices for quantum information applications.

Performance of the nanopost single-photon source: beyond the single-mode model

We present a detailed analysis of the physics governing the collection efficiency and the Purcell enhancement of the nanopost single-photon source. We show that a standard single-mode Fabry-Pérot model is insufficient to describe the device performance, which benefits significantly from scattering from the fundamental mode to radiation modes. We show how the scattering mechanism decouples the collection efficiency from the Purcell enhancement, such that maximum collection efficiency is obtained off-resonance. Finally, we discuss how this scattering mechanism can be beneficial for future single-photon source designs.

Sub-1 Volt and high-bandwidth visible to near-infrared electro-optic modulators

Integrated electro-optic (EO) modulators are fundamental photonics components with utility in domains ranging from digital communications to quantum information processing. At telecommunication wavelengths, thin-film lithium niobate modulators exhibit state-of-the-art performance in voltage-length product (VπL), optical loss, and EO bandwidth. However, applications in optical imaging, optogenetics, and quantum science generally require devices operating in the visible-to-near-infrared (VNIR) wavelength range. Here, we realize VNIR amplitude and phase modulators featuring VπL's of sub-1 V ⋅ cm, low optical loss, and high bandwidth EO response. Our Mach-Zehnder modulators exhibit a VπL as low as 0.55 V ⋅ cm at 738 nm, on-chip optical loss of ~0.7 dB/cm, and EO bandwidths in excess of 35 GHz. Furthermore, we highlight the opportunities these high-performance modulators offer by demonstrating integrated EO frequency combs operating at VNIR wavelengths, with over 50 lines and tunable spacing, and frequency shifting of pulsed light beyond its intrinsic bandwidth (up to 7x Fourier limit) by an EO shearing method.

On-Chip Electrostatic Actuation of a Photonic Wire Antenna Embedding Quantum Dots

A photonic wire antenna embedding individual quantum dots (QDs) constitutes a promising platform for both quantum photonics and hybrid nanomechanics. We demonstrate here an integrated device in which on-chip electrodes can apply a static or oscillating bending force to the upper part of the wire. In the static regime, we achieve control over the bending direction and apply at will tensile or compressive mechanical stress on any QD. This results in a blue shift or red shift of their emission, with direct application to the realization of broadly tunable sources of quantum light. As a first illustration of operation in the dynamic regime, we excite the wire fundamental flexural mode and use the QD emission to detect the mechanical vibration. With an estimated operation bandwidth in the GHz range, electrostatic actuation opens appealing perspectives for the exploration of QD-nanowire hybrid mechanics with high-frequency vibrational modes.

Ideal refocusing of an optically active spin qubit under strong hyperfine interactions

Combining highly coherent spin control with efficient light-matter coupling offers great opportunities for quantum communication and computing. Optically active semiconductor quantum dots have unparalleled photonic properties but also modest spin coherence limited by their resident nuclei. The nuclear inhomogeneity has thus far bound all dynamical decoupling measurements to a few microseconds. Here, we eliminate this inhomogeneity using lattice-matched GaAs-AlGaAs quantum dot devices and demonstrate dynamical decoupling of the electron spin qubit beyond 0.113(3) ms. Leveraging the 99.30(5)% visibility of our optical π-pulse gates, we use up to N_π = 81 decoupling pulses and find a coherence time scaling of [Formula: see text]. This scaling manifests an ideal refocusing of strong interactions between the electron and the nuclear spin ensemble, free of extrinsic noise, which holds the promise of lifetime-limited spin coherence. Our findings demonstrate that the most punishing material science challenge for such quantum dot devices has a remedy and constitute the basis for highly coherent spin-photon interfaces.

Correlations between Cascaded Photons from Spatially Localized Biexcitons in ZnSe

Radiative cascades emit correlated photon pairs, providing a pathway for the generation of entangled photons. The realization of a radiative cascade with impurity atoms in semiconductors, a leading platform for the generation of quantum light, would therefore provide a new avenue for the development of entangled photon pair sources. Here we demonstrate a radiative cascade from the decay of a biexciton at an impurity-atom complex in a ZnSe quantum well. The emitted photons show clear temporal correlations revealing the time-ordering of the cascade. Our result establishes impurity atoms in ZnSe as a potential platform for photonic quantum technologies using radiative cascades.

Ultra-low loss quantum photonic circuits integrated with single quantum emitters

The scaling of many photonic quantum information processing systems is ultimately limited by the flux of quantum light throughout an integrated photonic circuit. Source brightness and waveguide loss set basic limits on the on-chip photon flux. While substantial progress has been made, separately, towards ultra-low loss chip-scale photonic circuits and high brightness single-photon sources, integration of these technologies has remained elusive. Here, we report the integration of a quantum emitter single-photon source with a wafer-scale, ultra-low loss silicon nitride photonic circuit. We demonstrate triggered and pure single-photon emission into a Si₃N₄ photonic circuit with ≈ 1 dB/m propagation loss at a wavelength of ≈ 930 nm. We also observe resonance fluorescence in the strong drive regime, showing promise towards coherent control of quantum emitters. These results are a step forward towards scaled chip-integrated photonic quantum information systems in which storing, time-demultiplexing or buffering of deterministically generated single-photons is critical.

Anomalous spontaneous emission dynamics at chiral exceptional points

An open quantum system operated at the spectral singularities where dimensionality reduces, known as exceptional points (EPs), demonstrates distinguishing behavior from the Hermitian counterpart. Here, we present an analytical description of local density of states (LDOS) for microcavity featuring chiral EPs, and unveil the anomalous spontaneous emission dynamics from a quantum emitter (QE) due to the non-Lorentzian response of EPs. Specifically, we reveal that a squared Lorentzian term of LDOS contributed by chiral EPs can destructively interfere with the linear Lorentzian profile, resulting in the null Purcell enhancement to a QE with special transition frequency, which we call EP induced transparency. While for the case of constructive interference, the squared Lorentzian term can narrow the linewidth of Rabi splitting even below that of bare components, and thus significantly suppresses the decay of Rabi oscillation. Interestingly, we further find that an open microcavity with chiral EPs supports atom-photon bound states for population trapping and decay suppression in long-time dynamics. As applications, we demonstrate the advantages of microcavity operated at chiral EPs in achieving high-fidelity entanglement generation and high-efficiency single-photon generation. Our work unveils the exotic cavity quantum electrodynamics unique to chiral EPs, which opens the door for controlling light-matter interaction at the quantum level through non-Hermiticity, and holds great potential in building high-performance quantum-optics devices.

Two-Photon Excitation Sets Limit to Entangled Photon Pair Generation from Quantum Emitters

Entangled photon pairs are key to many novel applications in quantum technologies. Semiconductor quantum dots can be used as sources of on-demand, highly entangled photons. The fidelity to a fixed maximally entangled state is limited by the excitonic fine-structure splitting. This work demonstrates that, even if this splitting is absent, the degree of entanglement cannot reach unity when the excitation pulse in a two-photon resonance scheme has a finite duration. The degradation of the entanglement has its origin in a dynamically induced splitting of the exciton states caused by the laser pulse itself. Hence, in the setting explored here, the excitation process limits the achievable concurrence for entangled photons generated in an optically excited four-level quantum emitter.

Machine learning enhanced in situ electron beam lithography of photonic nanostructures

We report on the deterministic fabrication of quantum devices aided by machine-learning-based image processing. The goal of the work is to demonstrate that pattern recognition based on specifically trained machine learning (ML) algorithms and applying it to luminescence maps can strongly enhance the capabilities of modern fabrication technologies that rely on a precise determination of the positions of quantum emitters like, for instance, in situ lithography techniques. In the present case, we apply in situ electron beam lithography (EBL) to deterministically integrate single InGaAs quantum dots (QDs) into circular Bragg grating resonators with increased photon extraction efficiency (PEE). In this nanotechnology platform, suitable QDs are selected by 2D cathodoluminescence maps before EBL of the nanoresonators aligned to the selected emitters is performed. Varying the electron beam dose of cathodoluminescence (CL) mapping, we intentionally change the signal-to-noise ratio of the CL maps to mimic different brightness of the emitters and to train the ML algorithm. ML-based image processing is then used to denoise the images for reliable and accurate QD position retrieval. This way, we achieve a significant enhancement in the PEE and position accuracy, leading to more than one order increase of sensitivity in ML-enhanced in situ EBL. Overall, this demonstrates the high potential of ML-based image processing in deterministic nanofabrication which can be very attractive for the fabrication of bright quantum light sources based on emitters with low luminescence yield in the future.

Optical Transparency Induced by a Largely Purcell Enhanced Quantum Dot in a Polarization-Degenerate Cavity

Optically active spin systems coupled to photonic cavities with high cooperativity can generate strong light-matter interactions, a key ingredient in quantum networks. However, obtaining high cooperativities for quantum information processing often involves the use of photonic crystal cavities that feature a poor optical access from the free space, especially to circularly polarized light required for the coherent control of the spin. Here, we demonstrate coupling with a cooperativity as high as 8 of an InAs/GaAs quantum dot to a fabricated bullseye cavity that provides nearly degenerate and Gaussian polarization modes for efficient optical accessing. We observe spontaneous emission lifetimes of the quantum dot as short as 80 ps (an ∼15 Purcell enhancement) and a ∼80% transparency of light reflected from the cavity. Leveraging the induced transparency for photon switching while coherently controlling the quantum dot spin could contribute to ongoing efforts of establishing quantum networks.

Three-Dimensional Electrical Control of the Excitonic Fine Structure for a Quantum Dot in a Cavity

The excitonic fine structure plays a key role for the quantum light generated by semiconductor quantum dots, both for entangled photon pairs and single photons. Controlling the excitonic fine structure has been demonstrated using electric, magnetic, or strain fields, but not for quantum dots in optical cavities, a key requirement to obtain high source efficiency and near-unity photon indistinguishability. Here, we demonstrate the control of the fine structure splitting for quantum dots embedded in micropillar cavities. We propose and implement a scheme based on remote electrical contacts connected to the pillar cavity through narrow ridges. Numerical simulations show that such a geometry allows for a three-dimensional control of the electrical field. We experimentally demonstrate tuning and reproducible canceling of the fine structure, a crucial step for the reproducibility of quantum light source technology.

Bright Quantum Dot Single-Photon Emitters at Telecom Bands Heterogeneously Integrated on Si

Whereas the Si photonic platform is highly attractive for scalable optical quantum information processing, it lacks practical solutions for efficient photon generation. Self-assembled semiconductor quantum dots (QDs) efficiently emit photons in the telecom bands (1460-1625 nm) and allow for heterogeneous integration with Si. In this work, we report on a novel, robust, and industry-compatible approach for achieving single-photon emission from InAs/InP QDs heterogeneously integrated with a Si substrate. As a proof of concept, we demonstrate a simple vertical emitting device, employing a metallic mirror beneath the QD emitter, and experimentally obtained photon extraction efficiencies of ∼10%. Nevertheless, the figures of merit of our structures are comparable with values previously only achieved for QDs emitting at shorter wavelength or by applying technically demanding fabrication processes. Our architecture and the simple fabrication procedure allows for the demonstration of high-purity single-photon generation with a second-order correlation function at zero time delay, g ⁽²⁾(τ = 0) < 0.02, without any corrections at continuous wave excitation at the liquid helium temperature and preserved up to 50 K. For pulsed excitation, we achieve the as-measured g ⁽²⁾(0) down to 0.205 ± 0.020 (0.114 ± 0.020 with background coincidences subtracted).

High Extraction Efficiency Source of Photon Pairs Based on a Quantum Dot Embedded in a Broadband Micropillar Cavity

The generation of photon pairs in quantum dots is in its nature deterministic. However, efficient extraction of photon pairs from the high index semiconductor material requires engineering of the photonic environment. We report on a micropillar device with 69.4(10)% efficiency that features broadband operation suitable for extraction of photon pairs. Opposing the approaches that rely solely on Purcell enhancement to realize the enhancement of the extraction efficiency, our solution exploits a suppression of the emission into the modes other than the cavity mode. Furthermore, the design of the device can be further optimized to allow for an extraction efficiency of 85%.

Transverse Kerker Effect for Dipole Sources

Transverse Kerker effect is known by the directional scattering of an electromagnetic plane wave perpendicular to the propagation direction with nearly suppression of both forward and backward scattering. Compared with plane waves, localized electromagnetic emitters are more general sources in modern nanophotonics. As a typical example, manipulating the emission direction of a quantum dot is of vital importance for the investigation of on-chip quantum optics and quantum information processing. Herein, we introduce the concept of transverse Kerker effect for dipole sources utilizing a subwavelength dielectric antenna, where the radiative power of magnetic, electric, and more general chiral dipole emitters can be dominantly redirected along their dipole moments with nearly suppression of radiation perpendicular to the dipole moments. This type of transverse Kerker effect is also associated with Purcell enhancement mediated by electromagnetic multipolar resonances induced in the dielectric antenna. Analytical conditions of transverse Kerker effect are derived for the magnetic, electric, and chiral dipole emitters. We further provide microwave experiment validation for the magnetic dipole emitter. Our results provide new physical mechanisms to manipulate the emission properties of localized electromagnetic source which might facilitate the on-chip quantum optics and beyond.