Solving the oxygen sensitivity of sensitized photon upconversion in life science applications

Copper(II) Complexes with Isomeric Morpholine-Substituted 2-Formylpyridine Thiosemicarbazone Hybrids as Potential Anticancer Drugs Inhibiting Both Ribonucleotide Reductase and Tubulin Polymerization: The Morpholine Position Matters

The development of copper(II) thiosemicarbazone complexes as potential anticancer agents, possessing dual functionality as inhibitors of R2 ribonucleotide reductase (RNR) and tubulin polymerization by binding at the colchicine site, presents a promising avenue for enhancing therapeutic effectiveness. Herein, we describe the syntheses and physicochemical characterization of four isomeric proligands H2L3-H2L6, with the methylmorpholine substituent at pertinent positions of the pyridine ring, along with their corresponding Cu(II) complexes 3-6. Evidently, the position of the morpholine moiety and the copper(II) complex formation have marked effects on the in vitro antiproliferative activity in human uterine sarcoma MES-SA cells and the multidrug-resistant derivative MES-SA/Dx5 cells. Activity correlated strongly with quenching of the tyrosyl radical (Y•) of mouse R2 RNR protein, inhibition of RNR activity in the cancer cells, and inhibition of tubulin polymerization. Insights into the mechanism of antiproliferative activity, supported by experimental results and molecular modeling calculations, are presented.

Multifold Enhanced Photon Upconversion in a Composite Annihilator System Sensitized by Perovskite Nanocrystals

Photon upconversion via triplet-triplet annihilation (TTA-UC) provides a pathway to overcoming the thermodynamic efficiency limits in single-junction solar cells by allowing the harvesting of sub-bandgap photons. Here, we use mixed halide perovskite nanocrystals (CsPbX3, X = Br/I) as triplet sensitizers, with excitation transfer to 9,10-diphenylanthracene (DPA) and/or 9,10-bis[(triisopropylsilyl)ethynyl]anthracene (TIPS-An) which act as the triplet annihilators. We observe that the upconversion efficiency is five times higher with the combination of both annihilators in a composite system compared to the sum of the individual single-acceptor systems. Our work illustrates the importance of using a composite system of annihilators to enhance TTA upconversion, demonstrated in a perovskite-sensitized system, with promise for a range of potential applications in light-harvesting, biomedical imaging, biosensing, therapeutics, and photocatalysis.

Triplet-Triplet Annihilation Upconverting Liposomes: Mechanistic Insights into the Role of Membranes in Two-Dimensional TTA-UC

Triplet-triplet annihilation upconversion (TTA-UC) implemented in nanoparticle assemblies is of emerging interest in biomedical applications, including in drug delivery and imaging. As it is a bimolecular process, ensuring sufficient mobility of the sensitizer and annihilator to facilitate effective collision in the nanoparticle is key. Liposomes can provide the benefits of two-dimensional confinement and condensed concentration of the sensitizer and annihilator along with superior fluidity compared to other nanoparticle assemblies. They are also biocompatible and widely applied across drug delivery modalities. However, there are relatively few liposomal TTA-UC systems reported to date, so systematic studies of the influence of the liposomal environment on TTA-UC are currently lacking. Here, we report the first example of a BODIPY-based sensitizer TTA-UC system within liposomes and use this system to study TTA-UC generation and compare the relative intensity of the anti-Stokes signal for this system as a function of liposome composition and membrane fluidity. We report for the first time on time-resolved spectroscopic studies of TTA-UC in membranes. Nanosecond transient absorption data reveal the BODIPY-perylene dyad sensitizer has a long triplet lifetime in liposome with contributions from three triplet excited states, whose lifetimes are reduced upon coinclusion of the annihilator due to triplet-triplet energy transfer, to a greater extent than in solution. This indicates triplet energy transfer between the sensitizer and the annihilator is enhanced in the membrane system. Molecular dynamics simulations of the sensitizer and annihilator TTA collision complex are modeled in the membrane and confirm the co-orientation of the pair within the membrane structure and that the persistence time of the bound complex exceeds the TTA kinetics. Modeling also reliably predicted the diffusion coefficient for the sensitizer which matches closely with the experimental values from fluorescence correlation spectroscopy. The relative intensity of the TTA-UC output across nine liposomal systems of different lipid compositions was explored to examine the influence of membrane viscosity on upconversion (UC). UC showed the highest relative intensity for the most fluidic membranes and the weakest intensity for highly viscous membrane compositions, including a phase separation membrane. Overall, our study reveals that the co-orientation of the UC pair within the membrane is crucial for effective TTA-UC within a biomembrane and that the intensity of the TTA-UC output can be tuned in liposomal nanoparticles by modifying the phase and fluidity of the liposome. These new insights will aid in the design of liposomal TTA-UC systems for biomedical applications.

Programmable multimode optical encryption of advanced printable security inks by integrating structural color with Down/Up- conversion photoluminescence

Optical information encryption with high encoding capacities can significantly boost the security level of anti-counterfeiting in the scenario of guaranteeing the authenticity of a wide scope of common and luxury goods. In this work, a novel counterfeiting material with high-degree complexity is fabricated by microencapsulating cholesteric liquid crystals and triplet-triplet annihilation upconversion fluorophores to integrate structural coloration with fluorescence and upconversion photoluminescence. Moreover, the multimode security ink presents tailorable optical behaviors and programmable abilities on flexible substrates by various printing techniques, which offers distinct information encryption under different optical modes. The advanced strategy provides a practical versatile platform for high-secure-level multimode optical inks with largely enhanced encoding capacities, programmability, printability, and cost-effectiveness, which manifests enormous potentials for information encryption and anti-counterfeiting technology.

Triplet-Triplet Annihilation Upconversion-Based Photolysis: Applications in Photopharmacology

The emerging field of photopharmacology is a promising chemobiological methodology for optical control of drug activities that could ultimately solve the off-target toxicity outside the disease location of many drugs for the treatment of a given pathology. The use of photolytic reactions looks very attractive for a light-activated drug release but requires to develop photolytic reactions sensitive to red or near-infrared light excitation for better tissue penetration. This review will present the concepts of triplet-triplet annihilation upconversion-based photolysis and their recent in vivo applications for light-induced drug delivery using photoactivatable nanoparticles.

Molecular near-infrared triplet-triplet annihilation upconversion with eigen oxygen immunity

Molecular triplet-triplet annihilation upconversion often experiences drastic luminescence quenching in the presence of oxygen molecules, posing a significant constraint on practical use in aerated conditions. We present an oxygen-immune near-infrared triplet-triplet annihilation upconversion system utilizing non-organometallic cyanine sensitizers (λex = 808 nm) and chemically synthesized benzo[4,5]thieno[2,3-b][1,2,5]thiadiazolo[3,4-g]quinoxaline dyes with a defined dimer structure as annihilators (λem = 650 nm). This system exhibits ultrastable upconversion under continuous laser irradiance (>480 mins) or extended storage (>7 days) in aerated solutions. Mechanistic investigations reveal rapid triplet-triplet energy transfer from sensitizer to annihilators, accompanied by remarkably low triplet oxygen quenching efficiencies (η O 2  < 13% for the sensitizer, <3.7% for the annihilator), endowing the bicomponent triplet-triplet annihilation system with inherent oxygen immunity. Our findings unlock the direct and potent utilization of triplet-triplet annihilation upconversion systems in real-world applications, demonstrated by the extended and sensitive nanosensing of peroxynitrite radicals in the liver under in vivo nitrosative stress.

Enhancing Triplet-Triplet Annihilation Upconversion of Pyrene Derivatives for Photoredox Catalysis via Molecular Engineering

Triplet-triplet annihilation upconversion (TTA-UC) has the potential to enhance photoredox catalysis yield. It includes a sensitizer and an annihilator. Efficient and stable annihilators are essential for photoredox catalysis, yet only a few examples are reported. Herein, we designed four novel pyrene annihilators (1, 2, 3 and 4) via introducing aryl-alkynyl groups onto pyrene to systematically modulate their singlet and triplet energies. Coupled with platinum octaethylporphyrin (PtOEP), the TTA-UC efficiency is enhanced gradually as the number of aryl-alkynyl group increases. When combining 4 with palladium tetraphenyl-tetrabenzoporphyrin (PdTPTBP), we achieved the highest red-to-green upconversion efficiency (22.4±0.3 %) (out of a 50 % maximum) so far. Then, this pair was used to activate photooxidation of aryl boronic acid under red light (630 nm), which achieved a great improved reaction yield compared to that activated by green light directly. The results not only provide a design strategy for efficient annihilators, but also show the advantage of applying TTA-UC into improving the photoredox catalysis yield.

Enhancing NIR-to-visible upconversion in a rigidly coupled tetracene dimer: approaching statistical limits for triplet-triplet annihilation using intramolecular multiexciton states

Important applications of photon upconversion through triplet-triplet annihilation require conversion of near-IR photons to visible light. Generally, however, efficiencies in this spectral region lag behind bluer analogues. Herein we consider potential benefits from a conformationally well-defined covalent dimer annihilator TIPS-BTX in studies that systematically compare function to a related monomer model TIPS-tetracene (TIPS-Tc). TIPS-BTX exhibits weak electronic coupling between chromophores juxtaposed about a polycyclic bridge. We report an upconversion yield ϕUC for TIPS-BTX that is more than 20× larger than TIPS-Tc under comparable conditions (0.16%). While the dimer ϕUC is low compared to bluer champion systems, this yield is amongst the largest so-far reported for a tetracenic dimer system and is achieved under unoptimized conditions suggesting a significantly higher ceiling. Further investigation shows the ϕUC enhancement for the dimer is due exclusively to the TTA process with an effective yield more that 30× larger for TIPS-BTX compared to TIPS-Tc. The ϕTTA enhancement for TIPS-BTX relative to TIPS-Tc is indicative of participation by intramolecular multiexciton states with evidence presented in spin statistical arguments that the 5TT is involved in productive channels. For TIPS-BTX we report a spin-statistical factor f = 0.42 that matches or exceeds values found in champion annihilator systems such as DPA. At the same time, the poor relative efficiency of TIPS-Tc suggests involvement of non-productive bimolecular channels and excimeric states are suspected. Broadly these studies indicate that funneling of photogenerated electronic states into productive pathways, and avoiding parasitic ones, remains central to the development of champion upconversion systems.

Coulomb interactions for mediator-enhanced sensitized triplet-triplet annihilation upconversion in solution

Sensitized triplet-triplet annihilation upconversion offers an attractive possibility to replace a high-energy photon by two photons with lower energy through the combination of a light-harvesting triplet sensitizer and an annihilator for the formation of a fluorescent singlet state. Typically, high annihilator concentrations are required to achieve an efficient initial energy transfer and as a direct consequence the most highly energetic emission is often not detectable due to intrinsic reabsorption by the annihilator itself. Herein, we demonstrate that the addition of a charge-adapted mediator drastically improves the energy transfer efficiency at low annihilator concentrations via an energy transfer cascade. Inspired by molecular dyads and recent developments in nanocrystal-sensitized upconversion, our system exploits a concept to minimize intrinsic filter effects, while boosting the upconversion quantum yield in solution. A sensitizer-annihilator combination consisting of a ruthenium-based complex and 9,10-diphenylanthracene (DPA) is explored as model system and a sulfonated pyrene serves as mediator. The impact of opposite charges between sensitizer and mediator - to induce coulombic attraction and subsequently result in accelerated energy transfer rate constants - is analyzed in detail by different spectroscopic methods. Ion pairing and the resulting static energy transfer in both directions is a minor process, resulting in an improved overall performance. Finally, the more intense upconverted emission in the presence of the mediator is used to drive two catalytic photoreactions in a two-chamber setup, illustrating the advantages of our approach, in particular for photoreactions requiring oxygen that would interfere with the upconversion system.

Photochemically deoxygenating micelles for protecting TTA-UC against oxygen quenching

Pluronic F127, P123 and cross-linked F127 diacrylate micelles are photochemically deoxygenating nanocapsules in which oxygen could be removed by photochemical reaction with a surfactant and efficient triplet-triplet annihilation photon upconversion (TTA-UC) can be achieved in air. The efficiency of TTA-UC under air is comparable to that under deoxygenated conditions.

In Situ Construction of Near-Infrared Response Hybrid Up-Conversion Photocatalyst for Degrading Organic Dyes and Antibiotics

Unique nonlinear optical properties for converting low-energy incident light into high-energy radiation enable up-conversion materials to be employed in photocatalytic systems. An efficient near-infrared (NIR) response photocatalyst was successfully fabricated through a facile two-step method to load BiOBr on the Nd3+, Er3+@NaYF4 (NE@NYF) up-conversion material. The NE@NYF can transform NIR into visible and UV light and promote charge-energy transfer in the semiconductor. Consequently, the as-obtained photocatalysts exhibit excellent photodegradation performance for rhodamine B dye (RhB) and tetracycline (TC) organic pollutants. About 98.9% of the RhB was decomposed within 60 min with the 20% NE@NYF-B sample, outperforming the pristine BiOBr (61.9%). In addition, the 20% NE@NYF-B composite could decompose approximately 72.7% of the organic carbon during a 10 h reaction, which was almost two-fold more than that of BiOBr. Meanwhile, a possible charge transfer mechanism is proposed based on the recombination of electron-hole pairs and reactive oxygen species. This work provides a rational hybrid structure photocatalyst for improving photocatalytic performance in the broadband spectrum and provides a new strategy for NIR light utilization.

Dual-Site Förster Resonance Energy Transfer Route of Upconversion Nanoparticles-Based Brain-Targeted Nanotheranostic Boosts the Near-Infrared Phototherapy of Glioma

Glioblastoma multiforme (GBM) is the most common malignant brain tumor with low survival, primarily due to the blood-brain barrier (BBB) and high infiltration. Upconversion nanoparticles (UCNPs)-based near-infrared (NIR) phototherapy with deep penetration is a promising therapy method against glioma but faces low photoenergy utilization that is induced by spectral mismatch and single-site Förster resonance energy transfer (FRET). Herein, we designed a brain-targeting NIR theranostic system with a dual-site FRET route and superior spectral matching to maximize energy utilization for synergistic photodynamic and photothermal therapy of glioma. The system was fabricated by Tm-doped UCNPs, zinc tetraphenylporphyrin (ZnTPP), and copper sulfide (CuS) nanoparticles under multioptimized modulation. First, the Tm-doping ratio was precisely adjusted to improve the relative emission intensity at 475 nm of UCNPs (11.5-fold). Moreover, the J-aggregate of ZnTPP increased the absorption at 475 nm (163.5-fold) of monomer; both together optimize the FRET matching between UCNPs and porphyrin for effective NIR photodynamic therapy. Simultaneously, the emission at 800 nm was utilized to magnify the photothermal effect of CuS nanoparticles for photothermal therapy via the second FRET route. After being modified by a brain-targeted peptide, the system efficiently triggers the synergistic phototherapy ablation of glioma cells and significantly prolongs the survival of orthotopic glioma-bearing mice after traversing the BBB and targeting glioma. This success of advanced spectral modulation and dual-site FRET strategy may inspire more strategies to maximize the photoenergy utilization of UCNPs for brain diseases.

Photoactivatable Liposomes for Blue to Deep Red Light-Activated Surface Drug Release: Application to Controlled Delivery of the Antitumoral Drug Melphalan

Liposome-based nanoparticles able to release, via a photolytic reaction, a payload anchored at the surface of the phospholipid bilayer were prepared. The liposome formulation strategy uses an original drug-conjugated blue light-sensitive photoactivatable coumarinyl linker. This is based on an efficient blue light-sensitive photolabile protecting group modified by a lipid anchor, which enables its incorporation into liposomes, leading to blue to green light-sensitive nanoparticles. In addition, the formulated liposomes were doped with triplet-triplet annihilation upconverting organic chromophores (red to blue light) in order to prepare red light sensitive liposomes able to release a payload, by upconversion-assisted photolysis. Those light-activatable liposomes were used to demonstrate that direct blue or green light photolysis or red light TTA-UC-assisted drug photolysis can effectively photorelease a drug payload (Melphalan) and kill tumor cells in vitro after photoactivation.

Triplet-Triplet Annihilation Upconversion in a Porphyrinic Molecular Container

Triplet-triplet annihilation-based molecular photon upconversion (TTA-UC) is a photophysical phenomenon that can yield high-energy emitting photons from low-energy incident light. TTA-UC is believed to fuse two triplet excitons into a singlet exciton through several consecutive energy-conversion processes. When organic aromatic dyes─i.e., sensitizers and annihilators─are used in TTA-UC, intermolecular distances, as well as relative orientations between the two chromophores, are important in an attempt to attain high upconversion efficiencies. Herein, we demonstrate a host-guest strategy─e.g., a cage-like molecular container incorporating two porphyrinic sensitizers and encapsulating two perylene emitters inside its cavity─to harness photon upconversion. Central to this design is tailoring the cavity size (9.6-10.4 Å) of the molecular container so that it can host two annihilators with a suitable [π···π] distance (3.2-3.5 Å). The formation of a complex with a host:guest ratio of 1:2 between a porphyrinic molecular container and perylene was confirmed by NMR spectroscopy, mass spectrometry, and isothermal titration calorimetry (ITC) as well as by DFT calculations. We have obtained TTA-UC yielding blue emission at 470 nm when the complex is excited with low-energy photons. This proof-of-concept demonstrates that TTA-UC can take place in one supermolecule by bringing together the sensitizers and annihilators. Our investigations open up some new opportunities for addressing several issues associated with supramolecular photon upconversion, such as sample concentrations, molecular aggregation, and penetration depths, which have relevance to biological imaging applications.

Nanoengineering Triplet-Triplet Annihilation Upconversion: From Materials to Real-World Applications

Using light to control matter has captured the imagination of scientists for generations, as there is an abundance of photons at our disposal. Yet delivering photons beyond the surface to many photoresponsive systems has proven challenging, particularly at scale, due to light attenuation via absorption and scattering losses. Triplet-triplet annihilation upconversion (TTA-UC), a process which allows for low energy photons to be converted to high energy photons, is poised to overcome these challenges by allowing for precise spatial generation of high energy photons due to its nonlinear nature. With a wide range of sensitizer and annihilator motifs available for TTA-UC, many researchers seek to integrate these materials in solution or solid-state applications. In this Review, we discuss nanoengineering deployment strategies and highlight their uses in recent state-of-the-art examples of TTA-UC integrated in both solution and solid-state applications. Considering both implementation tactics and application-specific requirements, we identify critical needs to push TTA-UC-based applications from an academic curiosity to a scalable technology.

Water-Stable Upconverting Coordination Polymer Nanoparticles for Transparent Films and Anticounterfeiting Patterns with Air-Stable Upconversion

Photon upconversion (UC) based on triplet-triplet annihilation is a very promising phenomenon with potential application in several areas, though, due to the intrinsic mechanism, the achievement of diffusion-limited solid materials with air-stable UC is still a challenge. Herein, we report UC coordination polymer nanoparticles (CPNs) combining sensitizer and emitter molecules especially designed with alkyl spacers that promote the amorphous character. Beyond the characteristic constraints of crystalline MOFs, amorphous CPNs facilitate high dye density and flexible ratio tunability. To show the universality of the approach, two types of UC-CPNs are reported, exhibiting highly photostable UC in two different visible spectral regions. Given their nanoscale, narrow size distribution, and good chemical/colloidal stability in water, the CPNs were also successfully printed as anticounterfeiting patterns and used to make highly transparent and photostable films for luminescent solar concentrators, both showing air-stable UC.

Red Light-Responsive Upconverting Nanoparticles for Quantitative and Controlled Release of a Coumarin-Based Prodrug

Photolytic reactions allow the optical control of the liberation of biological effectors by photolabile protecting groups. The development of versatile technologies enabling the use of deep-red or NIR light excitation still represents a challenging issue, in particular for light-induced drug release (e.g., light-induced prodrug activation). Here, light-sensitive biocompatible lipid nanocapsules able to liberate an antitumoral drug through photolysis are presented. It is demonstrated that original photon upconverting nanoparticles (LNC-UCs) chemically conjugated to a coumarin-based photocleavable linker can quantitatively and efficiently release a drug by upconversion luminescence-assisted photolysis using a deep-red excitation wavelength. In addition, it is also able to demonstrate that such nanoparticles are stable in the dark, without any drug leakage in the absence of light. These findings open new avenues to specifically liberate diverse drugs using deep-red or NIR excitations for future therapeutic applications in nanomedicine.

Photon Upconversion with a Low Threshold Excitation Intensity in Plain Water

A triplet-triplet annihilation-based photon upconversion (TTA-UC) system with a low threshold excitation intensity (I_th) in plain water was developed. Water-soluble anionic porphyrin (PdTPPS^4-) and diphenylanthracene (DCDPA^2-) derivatives were used as light absorbers and emitter molecules, respectively, and no additives such as surfactants were required. The phosphorescence emission from PdTPPS^4- under an excitation wavelength of 528 nm was quenched by DCDPA^2-, resulting in triplet energy transfer, whereas fluorescence from DCDPA^2- was observed in a short wavelength region (400-500 nm). Three independent emission studies utilizing different excitation light sources validated the TTA-UC process in a simple aqueous solution. TTA occurred after the triplet energy transfer, according to the time profiles of phosphorescence and fluorescence detected following pulse laser excitation. The I_th for TTA-UC was estimated to be lower than 6 mW cm^-2, although it could not be exactly determined due to the sensitivity limit of the experimental setup. The upper limit of I_th for the aqueous solution of DCDPA^2- and PdTPPS^4- is the smallest value obtained to date for aqueous systems and comparable to that of high-performance TTA-UC systems in organic solutions.

Near-Infrared-Responded High Sensitivity Nanoprobe for Steady and Visualized Detection of Albumin in Hepatic Organoids and Mouse Liver

Exploring the advanced techniques for protein detection facilitates cell fate investigation. However, it remains challenging to quantify and visualize the protein with one single probe. Here, a luminescent approach to detect hepatic cell fate marker albumin in vitro and living cell labeling with upconversion nanoparticles (UCNPs), which are conjugated with antibody (Ab) and rose bengal hexanoic acid (RBHA) is reported. To guarantee the detection quality and accuracy, an "OFF-ON" strategy is adopted: in the presence of albumin, the luminescence of nanoparticles remains suppressed owing to energy transfer to the quencher. Upon albumin binding to the antibody, the luminescence is recovered under near-infrared light. In various bio-samples, the UCNPs-Ab-RBHA (UCAR) nanoprobe can sense albumin with a broad detection range (5-315 ng mL^-1 ). When applied to liver ductal organoid culture medium, the UCAR can monitor hepatocyte differentiation in real time by sensing the secreted albumin. Further, UCAR enables live imaging of cellular albumin in cells, organoids, and tissues. In a CCl₄ -induced liver injury model, UCAR detects reduced albumin in liver tissue and serum. Thus, a biocompatible nanoprobe for both quantification and imaging of protein in complex biological environment with superior stability and high sensitivity is provided.

Recent Advances in the Photoreactions Triggered by Porphyrin-Based Triplet–Triplet Annihilation Upconversion Systems: Molecular Innovations and Nanoarchitectonics

Triplet–triplet annihilation upconversion (TTA-UC) is a very promising technology that could be used to convert low-energy photons to high-energy ones and has been proven to be of great value in various areas. Porphyrins have the characteristics of high molar absorbance, can form a complex with different metal ions and a high proportion of triplet states as well as tunable structures, and thus they are important sensitizers for TTA-UC. Porphyrin-based TTA-UC plays a pivotal role in the TTA-UC systems and has been widely used in many fields such as solar cells, sensing and circularly polarized luminescence. In recent years, applications of porphyrin-based TTA-UC systems for photoinduced reactions have emerged, but have been paid little attention. As a consequence, this review paid close attention to the recent advances in the photoreactions triggered by porphyrin-based TTA-UC systems. First of all, the photochemistry of porphyrin-based TTA-UC for chemical transformations, such as photoisomerization, photocatalytic synthesis, photopolymerization, photodegradation and photochemical/photoelectrochemical water splitting, was discussed in detail, which revealed the different mechanisms of TTA-UC and methods with which to carry out reasonable molecular innovations and nanoarchitectonics to solve the existing problems in practical application. Subsequently, photoreactions driven by porphyrin-based TTA-UC for biomedical applications were demonstrated. Finally, the future developments of porphyrin-based TTA-UC systems for photoreactions were briefly discussed.

A Biodegradable Iridium(III) Coordination Polymer for Enhanced Two-Photon Photodynamic Therapy Using an Apoptosis-Ferroptosis Hybrid Pathway

The clinical application of photodynamic therapy is hindered by the high glutathione concentration, poor cancer-targeting properties, poor drug loading into delivery systems, and an inefficient activation of the cell death machinery in cancer cells. To overcome these limitations, herein, the formulation of a promising Ir^III complex into a biodegradable coordination polymer (IrS NPs) is presented. The nanoparticles were found to remain stable under physiological conditions but deplete glutathione and disintegrate into the monomeric metal complexes in the tumor microenvironment, causing an enhanced therapeutic effect. The nanoparticles were found to selectively accumulate in the mitochondria where these trigger cell death by hybrid apoptosis and ferroptosis pathways through the photoinduced production of singlet oxygen and superoxide anion radicals. This study presents the first example of a coordination polymer that can efficiently cause cancer cell death by apoptosis and ferroptosis upon irradiation, providing an innovative approach for cancer therapy.

Upconversion nanomaterials and delivery systems for smart photonic medicines and healthcare devices

In the past decade, upconversion (UC) nanomaterials have been extensively investigated for the applications to photomedicines with their unique features including biocompatibility, near-infrared (NIR) to visible conversion, photostability, controllable emission bands, and facile multi-functionality. These characteristics of UC nanomaterials enable versatile light delivery for deep tissue biophotonic applications. Among various stimuli-responsive delivery systems, the light-responsive delivery process has been greatly advantageous to develop spatiotemporally controllable on-demand "smart" photonic medicines. UC nanomaterials are classified largely to two groups depending on the photon UC pathway and compositions: inorganic lanthanide-doped UC nanoparticles and organic triplet-triplet annihilation UC (TTA-UC) nanomaterials. Here, we review the current-state-of-art inorganic and organic UC nanomaterials for photo-medicinal applications including photothermal therapy (PTT), photodynamic therapy (PDT), photo-triggered chemo and gene therapy, multimodal immunotherapy, NIR mediated neuromodulations, and photochemical tissue bonding (PTB). We also discuss the future research direction of this field and the challenges for further clinical development.

Elucidation of Structure-Activity Relationships in Indolobenzazepine-Derived Ligands and Their Copper(II) Complexes: the Role of Key Structural Components and Insight into the Mechanism of Action

Indolo[3,2-d][1]benzazepines (paullones), indolo[3,2-d][2]benzazepines, and indolo[2,3-d][2]benzazepines (latonduines) are isomeric scaffolds of current medicinal interest. Herein, we prepared a small library of novel indolo[3,2-d][2]benzazepine-derived ligands HL¹-HL⁴ and copper(II) complexes 1-4. All compounds were characterized by spectroscopic methods (¹H and ¹³C NMR, UV-vis, IR) and electrospray ionization (ESI) mass spectrometry, while complexes 2 and 3, in addition, by X-ray crystallography. Their purity was confirmed by HPLC coupled with high-resolution ESI mass spectrometry and/or elemental analysis. The stability of compounds in aqueous solutions in the presence of DMSO was confirmed by ¹H NMR and UV-vis spectroscopy measurements. The compounds revealed high antiproliferative activity in vitro in the breast cancer cell line MDA-MB-231 and hepatocellular carcinoma cell line LM3 in the low micromolar to nanomolar concentration range. Important structure-activity relationships were deduced from the comparison of anticancer activities of HL¹-HL⁴ and 1-4 with those of structurally similar paullone-derived (HL⁵-HL⁷ and 5-7) and latonduine-derived scaffolds (HL⁸-HL¹¹ and 8-11). The high anticancer activity of the lead drug candidate 4 was linked to reactive oxygen species and endoplasmic reticulum stress induction, which were confirmed by fluorescent microscopy and Western blot analysis.

Tetrathienothiophene Porphyrin as a Metal-Free Sensitizer for Room-Temperature Triplet–Triplet Annihilation Upconversion

Optically excited triplet states of organic molecules serve as an energy pool for the subsequent processes, either photon energy downhill, such as room temperature phosphorescence, or photon energy uphill process—the triplet–triplet annihilation upconversion (TTA-UC). Manifestation of a high intersystem crossing coefficient is an unavoidable requirement for triplet state formation, following the absorption of a single photon. This requirement is even more inevitable if the excitation light is non-coherent, with moderate intensity and extremely low spectral power density, when compared with the light parameters of 1 Sun (1.5 AM). Coordination of a heavy atom increases substantially the probability of intersystem crossing. Nevertheless, having in mind the global shortage in precious and rare-earth metals, identification of metal-free organic moieties able to form triplet states becomes a prerequisite for environmental friendly optoelectronic technologies. This motivates us to synthesize a metal-free thienothiophene containing porphyrin, based on a condensation reaction between thienothiophene-2-carbaldehyde and pyrrole in an acidic medium by modified synthetic protocol. The upconversion couple tetrathienothiophene porphyrin/rubrene when excited at λ = 658 nm demonstrates bright, delayed fluorescence with a maximum emission at λ = 555 nm. This verifies our hypothesis that the ISC coefficient in thienothiophene porphyrin is efficient in order to create even at room temperature and low-intensity optical excitation densely populated organic triplet ensemble and is suitable for photon energy uphill processes, which makes this type of metal-free sensitizers even more important for optoelectronic applications.

Microfluidic oxygen tolerability screening of nanocarriers for triplet fusion photon upconversion

The full potential of triplet fusion photon upconversion (TF-UC) of providing high-energy photons locally with low-energy excitation is limited in biomedicine and life sciences by its oxygen sensitivity. This hampers the applicability of TF-UC systems in sensors, imaging, optogenetics and drug release. Despite the advances in improving the oxygen tolerability of TF-UC systems, the evaluation of oxygen tolerability is based on comparing the performance at completely deoxygenated (0% oxygen) and ambient (20-21%) conditions, leaving the physiological oxygen levels (0.3-13.5%) neglected. This oversight is not deliberate and is only the result of the lack of simple and predictable methods to obtain and maintain these physiological oxygen levels in an optical setup. Herein, we demonstrate the use of microfluidic chips made of oxygen depleting materials to study the oxygen tolerability of four different micellar nanocarriers made of FDA-approved materials with various oxygen scavenging capabilities by screening their TF-UC performance over physiological oxygen levels. All nanocarriers were capable of efficient TF-UC even in ambient conditions. However, utilizing oxygen scavengers in the oil phase of the nanocarrier improves the oxygen tolerability considerably. For example, at the mean tumour oxygen level (1.4%), nanocarriers made of surfactants and oil phase both capable of oxygen scavenging retained remarkably 80% of their TF-UC emission. This microfluidic concept enables faster, simpler and more realistic evaluation of, not only TF-UC, but any micro or nanoscale oxygen-sensitive system and facilitates their development and implementation in biomedical and life science applications.

Enhancement of Upconversion Luminescence by the Construction of a 3Yb-Er-Hf Sublattice Energy Cluster and Surface Defect Elimination

Nanotetragonal LiYF₄:RE (Tm,Er,Ho) is a kind of excellent upconversion luminescence (UCL) material potentially used in many fields, while the enhancement of UC emission and regulation of luminescence lifetime are still a challenge. Herein, a strategy was reported to enhance UCL performance with the aid of the construction of a 3Yb-Er-Hf sublattice energy cluster with the introduction of Hf⁴⁺ and the interception of surface defect fluorescence quenching. UCL was obviously decreased by Hf⁴⁺ doping without surface defect elimination, but after the interception of surface defect quenching, UCL was dramatically enhanced more than 300-fold with an Er³⁺/Hf⁴⁺ mole ratio of 1:1. The contribution of UCL enhancement by the construction of a 3Yb-Er-Hf sublattice energy cluster is about 1.5 times of the sample without energy cluster construction. Interestingly, the lifetime of UCL can also be regulated by this strategy. According to the results of systematical microstructure analyses and UCL performance behaviors examined by X-ray powder diffraction (XRD), small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), nuclear magnetic resonance (NMR), and fluorescence spectrophotometry (FS) methods, the possible mechanism of UCL enhancement was proposed. This work may be an inspiration for researchers to design and develop high-performance UCL nanomaterials.

A prototype protein nanocage minimized from carboxysomes with gated oxygen permeability

Protein nanocages (PNCs) in cells and viruses have inspired the development of self-assembling protein nanomaterials for various purposes. Despite the successful creation of artificial PNCs, the de novo design of PNCs with defined permeability remains challenging. Here, we report a prototype oxygen-impermeable PNC (OIPNC) assembled from the vertex protein of the β-carboxysome shell, CcmL, with quantum dots as the template via interfacial engineering. The structure of the cage was solved at the atomic scale by combined solid-state NMR spectroscopy and cryoelectron microscopy, showing icosahedral assembly of CcmL pentamers with highly conserved interpentamer interfaces. Moreover, a gating mechanism was established by reversibly blocking the pores of the cage with molecular patches. Thus, the oxygen permeability, which was probed by an oxygen sensor inside the cage, can be completely controlled. The CcmL OIPNC represents a PNC platform for oxygen-sensitive or oxygen-responsive storage, catalysis, delivery, sensing, etc.

Design Guidelines for Rigid Epoxy Resins with High Photon Upconversion Efficiency: Critical Role of Emitter Concentration

For the practical application of triplet-triplet annihilation-based photon upconversion (TTA-UC), the development of rigid, transparent, air-stable, and moldable materials with a high TTA-UC efficiency remains a challenging issue. In addition to the noncovalent introduction of ionic liquid emitters into the epoxy network, we covalently introduce emitters with polymerization sites to increase the emitter concentration to 35.6 wt %. A TTA-UC quantum yield ΦUC of 5.7% (theoretical maximum: 50%) or a TTA-UC efficiency ηUC of 11.4% (theoretical maximum: 100%) is achieved, which is the highest value ever achieved for a rigid polymer material. More importantly, the high emitter concentration speeds up the triplet diffusion and suppresses the back energy transfer from the emitter to sensitizer so that the sensitized emitter triplet can be effectively utilized for TTA. The generality of our finding is also confirmed for epoxy resins of similar emitter unit concentrations without the ionic liquid. This work provides important design guidelines for achieving highly efficient TTA-UC in rigid solid materials, which has been very difficult to achieve in the past. Furthermore, the solid-state TTA-UC exhibits high air stability, reflecting the high oxygen barrier performance of epoxy resins. The high moldability of epoxy resins allows the construction of upconversion materials with complex geometries at nano- to macroscopic scales.

Luminescence Ratiometric Nanothermometry Regulated by Tailoring Annihilators of Triplet-Triplet Annihilation Upconversion Nanomicelles

Triplet-triplet annihilation (TTA) upconversion is a special non-linear photophysical process that converts low-energy photons into high-energy photons based on sensitizer/annihilator pairs. Here, we constructed a novel luminescence ratiometric nanothermometer based on TTA upconversion nanomicelles by encapsulating sensitizer/annihilator molecules into a temperature-sensitive amphiphilic triblock polymer and obtained good linear relationships between the luminescence ratio (integrated intensity ratio of upconverted luminescence peak to the downshifted phosphorescence peak) and the temperature. We also found chemical modification of annihilators would rule out the interference of the polymer concentration and stereochemical engineering of annihilators would readily regulate the thermal sensitivity.

Directing Energy Transfer in Halide Perovskite-Chromophore Hybrid Assemblies

Directing the flow of energy and the nature of the excited states that are produced in nanocrystal-chromophore hybrid assemblies is crucial for realizing their photocatalytic and optoelectronic applications. Using a combination of steady-state and time-resolved absorption and photoluminescence (PL) experiments, we have probed the excited-state interactions in the CsPbBr₃-Rhodamine B (RhB) hybrid assembly. PL studies reveal quenching of the CsPbBr₃ emission with a concomitant enhancement of the fluorescence of RhB, indicating a singlet-energy-transfer mechanism. Transient absorption spectroscopy shows that this energy transfer occurs on the ∼200 ps time scale. To understand whether the energy transfer occurs through a Förster or Dexter mechanism, we leveraged facile halide-exchange reactions to tune the optical properties of the donor CsPbBr₃ by alloying with chloride. This allowed us to tune the spectral overlap between the donor CsPb(Br_1-xCl_x)₃ emission and acceptor RhB absorption. For CsPbBr₃-RhB, the rate constant for energy transfer (k_ET) agrees well with Förster theory, whereas alloying with chloride to produce chloride-rich CsPb(Br_1-xCl_x)₃ favors a Dexter mechanism. These results highlight the importance of optimizing both the donor and acceptor properties to design light-harvesting assemblies that employ energy transfer. The ease of tuning optical properties through halide exchange of the nanocrystal donor provides a unique platform for studying and tailoring excited-state interactions in perovskite-chromophore assemblies.

Application of Triplet-Triplet Annihilation Upconversion in Organic Optoelectronic Devices: Advances and Perspectives

Organic semiconductor materials have been widely used in various optoelectronic devices due to their rich optical and/or electrical properties, which are highly related to their excited states. Therefore, how to manage and utilize the excited states in organic semiconductors is essential for the realization of high-performance optoelectronic devices. Triplet-triplet annihilation (TTA) upconversion is a unique process of converting two non-emissive triplet excitons to one singlet exciton with higher energy. Efficient optical-to-electrical devices can be realized by harvesting sub-bandgap photons through TTA-based upconversion. In electrical-to-optical devices, triplets generated after the combination of electrons and holes also can be efficiently utilized via TTA, which resulted in a high internal conversion efficiency of 62.5%. Currently, many interesting explorations and significant advances have been demonstrated in these fields. In this review, a comprehensive summary of these intriguing advances on developing efficient TTA upconversion materials and their application in optoelectronic devices is systematically given along with some discussions. Finally, the key challenges and perspectives of TTA upconversion systems for further improvement for optoelectronic devices and other related research directions are provided. This review hopes to provide valuable guidelines for future related research and advancement in organic optoelectronics.

Multiphoton Upconversion Materials for Photocatalysis and Environmental Remediation

Solar-driven photocatalysis holds great potential for energy conversion, environmental remediation, and sustainable chemistry. However, practical applications of conventional photocatalytic systems have been constrained by their insufficient ability to harvest solar radiation in the infrared spectrum. Lanthanide-doped upconversion materials possess high photostability, tunable absorption, and the ability to convert low-energy infrared radiation into high-energy emission, making them attractive for infrared-driven photocatalysis. This review highlights essential principles for rational design of efficient photocatalysts. Particular emphasis is placed on current state-of-the-arts that offer enhanced upconversion luminescence efficiency. We also summarize recent advances in lanthanide-doped upconversion materials for photocatalysis. We conclude with new challenges and prospects for future developments of infrared-driven photocatalysts.

Photon Upconversion for Photovoltaics and Photocatalysis: A Critical Review

Opportunities for enhancing solar energy harvesting using photon upconversion are reviewed. The increasing prominence of bifacial solar cells is an enabling factor for the implementation of upconversion, however, when the realistic constraints of current best-performing silicon devices are considered, many challenges remain before silicon photovoltaics operating under nonconcentrated sunlight can be enhanced via lanthanide-based upconversion. A photophysical model reveals that >1-2 orders of magnitude increase in the intermediate state lifetime, energy transfer rate, or generation rate would be needed before such solar upconversion could start to become efficient. Methods to increase the generation rate such as the use of cosensitizers to expand the absorption range and the use of plasmonics or photonic structures are reviewed. The opportunities and challenges for these approaches (or combinations thereof) to achieve efficient solar upconversion are discussed. The opportunity for enhancing the performance of technologies such as luminescent solar concentrators by combining upconversion together with micro-optics is also reviewed. Triplet-triplet annihilation-based upconversion is progressing steadily toward being relevant to lower-bandgap solar cells. Looking toward photocatalysis, photophysical modeling indicates that current blue-to-ultraviolet lanthanide upconversion systems are very inefficient. However, hope remains in this direction for organic upconversion enhancing the performance of visible-light-active photocatalysts.

How to Minimize Light-Organic Matter Interactions for All-Optical Sub-Cutaneous Temperature Sensing

Penetration and emanation of light into tissue are limited by the strong interaction of light with the tissue components, especially oxygenated hemoglobin and white adipose tissue. This limits the possibilities for all-optical minimal invasive sensing. In order to minimize the optical losses of light in and out of the tissue, only a narrow optical window between 630 and 900 nm is available. In this work, we realized for the first time all-optical temperature sensing within the narrow optical window for tissue by using the process of triplet-triplet annihilation photon energy upconversion (TTA-UC) as a sensing tool. For this, we apply the asymmetrical benzo-fused BODIPY dye as an optimal emitter and mixed palladium benzo-naphtho-porphyrins as an optimal sensitizer. The TTA-UC sensing system is excited with λ = 658 nm with an extremely low intensity of 1 mW × cm^-2 and is factual-protected for a time period longer than 100 s against oxygen-stimulated damage, allowing a stable demonstration of this T-sensing system also in an oxygen-rich environment without losing sensitivity. The sensing dyes we embed in the natural wax/natural matrix, which is intrinsically biocompatible, are approved by the FDA as food additives. The demonstrated temperature sensitivity is higher than ΔT = 200 mK placed around the physiologically relevant temperature of T = 36 °C.

Recent Advances in Light Energy Conversion with Biomimetic Vesicle Membranes

Lipid bilayer membranes are ubiquitous in natural chemical conversions. They enable self‐assembly and compartmentalization of reaction partners and it becomes increasingly evident that a thorough fundamental understanding of these concepts is highly desirable for chemical reactions and solar energy conversion with artificial systems. This minireview focusses on selected case studies from recent years, most of which were inspired by either membrane‐facilitated light harvesting or respective charge transfer. The main focus is on highly biomimetic liposomes with artificial chromophores, and some cases for polymer‐membranes will be made. Furthermore, we categorized these studies into energy transfer and electron transfer, with phospholipid vesicles, and polymer membranes for light‐driven reactions.

Organic Polymer Hosts for Triplet-Triplet Annihilation Upconversion Systems

Triplet-triplet annihilation upconversion (TTA-UC) is a process by which a lower energy photon can be upconverted to a higher energy state. The incorporation of TTA-UC materials into solid-state hosts has enabled advances in solar energy and many other applications. The choice of host system is, however, far from trivial and often calls for a careful compromise between characteristics such as high molecular mobility, low oxygen diffusion, and high material stability, factors that often contradict one another. Here, we evaluate these challenges in the context of the state-of-the-art of primarily polymer hosts and the advantages they hold in terms of material selection and tunability of their diffusion or mechanical or thermal properties. We encourage more collaborative research between polymer scientists and photophysicists in order to further optimize the current systems and outline our thoughts for the future direction of the field.

Recent near-infrared light-activated nanomedicine toward precision cancer therapy

Light has been present throughout the history of mankind and even the universe. It is of great significance to human life, contributing to energy, agriculture, communication, and much more. In the biomedical field, light has been developed as a switch to control medical processes with minimal invasion and high spatiotemporal selectivity. During the past three years, near-infrared (NIR) light as long-wavelength light has been applied to more than 3000 achievements in biological applications due to its deep penetration depth and low phototoxicity. Remotely controlled cancer therapy usually involves the conversion of biologically inert NIR light. Thus, various materials, especially nanomaterials that can generate reactive oxygen species (ROS), ultraviolet (UV)/visual light, or thermal energy and so on under NIR illumination achieve great potential for the research of nanomedicine. Here, we offered an overview of recent advances in NIR light-activated nanomedicine for cancer therapeutic applications. NIR-light-conversion nanotechnologies for both directly triggering nanodrugs and smart drug delivery toward tumor therapy were discussed emphatically. The challenges and future trends of the use of NIR light in biomedical applications were also provided as a conclusion. We expect that this review will spark inspiration for biologists, materials scientists, pharmacologists, and chemists to fight against diseases and boost the future clinical-translational applications of NIR technology-based precision nanomedicine.

Nano-assembly of ruthenium(II) photosensitizers for endogenous glutathione depletion and enhanced two-photon photodynamic therapy

Photodynamic therapy (PDT) is a promising noninvasive cancer treatment. PDT in the clinic faces several hurdles due to the unique tumor environment, a feature of which is high levels of glutathione (GSH). An excess amount of GSH consumes reactive oxygen species (ROS) generated by photosensitizers (PSs), reducing PDT efficiency. Herein, nano-photosensitizers (RuS1 NPs and RuS2 NPs) are reported. These consist of ruthenium complexes joined by disulfide bonds forming GSH sensitive polymer nanoparticles. The NPs achieve enhanced uptake compared to their constituent monomers. Inside cancer cells, high levels of GSH break the S-S bonds releasing PS molecules in the cell. The level of GSH is also then reduced leading to excellent PDT activity. Furthermore, RuS2 NPs functionalized with tumor targeting hyaluronic acid (HA@RuS2 NPs) assessed in vivo were highly effective with minimal side effects. To the best of our knowledge, RuS NPs are the first metal complex-based nano-assembled photosensitizers which exhibit enhanced specificity and consume endogenous GSH simultaneously, thus achieving excellent two-photon PDT efficiency in vitro and in vivo.

Enzymatic enhancing of triplet-triplet annihilation upconversion by breaking oxygen quenching for background-free biological sensing

Triplet-triplet annihilation upconversion nanoparticles have attracted considerable interest due to their promises in organic chemistry, solar energy harvesting and several biological applications. However, triplet-triplet annihilation upconversion in aqueous solutions is challenging due to sensitivity to oxygen, hindering its biological applications under ambient atmosphere. Herein, we report a simple enzymatic strategy to overcome oxygen-induced triplet-triplet annihilation upconversion quenching. This strategy stems from a glucose oxidase catalyzed glucose oxidation reaction, which enables rapid oxygen depletion to turn on upconversion in the aqueous solution. Furthermore, self-standing upconversion biological sensors of such nanoparticles are developed to detect glucose and measure the activity of enzymes related to glucose metabolism in a highly specific, sensitive and background-free manner. This study not only overcomes the key roadblock for applications of triplet-triplet annihilation upconversion nanoparticles in aqueous solutions, it also establishes the proof-of-concept to develop triplet-triplet annihilation upconversion nanoparticles as background free self-standing biological sensors.

Bulk Transparent Photon Upconverting Films by Dispersing High-Concentration Ionic Emitters in Epoxy Resins

It remains challenging to achieve efficient and air-stable photon upconversion (UC) in rigid, technologically valuable transparent films. Here, we report the first example of epoxy resins that show an air-stable and efficient triplet-triplet annihilation (TTA)-based UC. Epoxy resins are thermally cross-linked polymers widely used as coating and sealing materials in actual devices. To achieve efficient TTA-UC in rigid epoxy films, it is essential to execute both the triplet sensitization and triplet exciton diffusion processes without relying on molecular diffusion. This requires homogeneously dispersing emitter molecules without aggregation in three-dimensionally cross-linked rigid polymer networks at a high concentration (ca. 1000 mM) such that the inter-emitter distance is less than 1 nm, where dexter energy transfer can occur. This difficult requirement is solved by employing an ionic liquid emitter that consists of 9,10-diphenylanthracene sulfonate and lipophilic phosphonium ions bearing long alkyl chains. The obtained epoxy resins show a high TTA-UC efficiency (η_UC = 3.8%) and low threshold excitation intensity (I_th = 40 mW cm^-2) in air. These UC parameters are achieved by virtue of a very high sensitizer-to-emitter triplet energy-transfer efficiency (92.8%) and a significantly long emitter triplet lifetime (17.8 ms) that reflect the high emitter concentration and the rigid chromophore environment, respectively. The bulk transparent upconverting resins can be prepared in air and function in air, which opens a new avenue toward a wide range of real-world applications.

Bright and Robust Phosphorescence Achieved by Non-Covalent Clipping

Phosphorescent materials with bright emission in versatile media are important for their practical applications, which require to lower the susceptibility of triplet excitons to surroundings. Herein a non-covalent clipping strategy has been developed to attain this objective, by designing a tweezer receptor to encapsulate Pt^II -based triplet emitters through two-fold π-stacking interactions. The Pt^II emitters display robust phosphorescence by virtue of synergistic rigidifying and shielding effects, which are hardly influenced by emitter concentration, oxygen content, and solvent polarity changes. The phosphorescent colors are elaborately modulated by varying ligand substitutes on Pt^II emitters. Circularly polarized phosphorescence is further amplified for chiral Pt^II emitters, by taking advantage of dual phosphorescence and chirality enhancement upon non-covalent tweezer complexation. Overall, the clipping approach paves the way for the development of high-performance phosphorescent materials with bright emission, environmental robustness, and facile color tunability.

Interdependence of photon upconversion performance and antisolvent processing in thin-film halide perovskite-sensitized triplet-triplet annihilators

We prepared triplet-triplet annihilation photon upconverters combining thin-film methylammonium lead iodide (MAPI) perovskite with a rubrene annihilator in a bilayer structure. Excitation of the perovskite film leads to delayed, upconverted photoluminescence emitted from the annihilator layer, with triplet excitation of the rubrene being driven by carriers excited in the perovskite layer. To better understand the connections between the semiconductor properties of the perovskite film and the upconversion efficiency, we deliberately varied the perovskite film properties by modifying two spin-coating conditions, namely, the choice of antisolvent and the antisolvent dripping time, and then studied the resulting photon upconversion performance with a standard annihilator layer. A stronger upconversion effect was exhibited when the perovskite films displayed brighter and more uniform photoluminescence. Both properties were sensitive to the antisolvent dripping time and were maximized for a dripping time of 20 s (measured relative to the end of the spin-coating program). Surprisingly, the choice of antisolvent had a significant effect on the upconversion performance, with anisole-treated films yielding on average a tenfold increase in upconversion intensity compared to the chlorobenzene-treated equivalent. This performance difference was correlated with the carrier lifetime in the perovskite film, which was 52 ns and 306 ns in the brightest chlorobenzene and anisole-treated films, respectively. Since the bulk properties of the anisole- and chlorobenzene-treated films were virtually identical, we concluded that differences in the defect density at the MAPI/rubrene interface, linked to the choice of antisolvent, must be responsible for the differing upconversion performance.