Photocatalytic degradation of toxic aquatic pollutants by novel magnetic 3D-TiO2@HPGA nanocomposite

Tailoring visible-light active TiO2/cellulose nanocomposites with controlled crystalline structure for enhanced photocatalytic performance

This work involves a green and simple synthesis of TiO2 nanoparticles on cellulose under mild conditions without the need for calcination via hydrolysis of titanium oxysulfate (TiOSO4). The synthesis conditions, such as sulfuric acid concentration (0-10% wt), temperature (70-90 ℃), and time (4-8 h), focused on precisely controlling the structure of TiO2 to enhance its photocatalytic effectiveness under visible light. At a lower 2.5 wt% sulfuric acid concentration, pure anatase was formed on the cellulose, while an increase in the range of 5.0-7.5 wt% sulfuric acid concentration yielded a rutile phase, resulting in a mixed phase of anatase and rutile on the cellulose. The pure rutile phase was found at a low temperature (70 ℃), while increased temperature led to the formation of the anatase phase. These results confirmed that the formation of crystalline TiO2 phase on the cellulose depended on sulfuric acid concentration and temperature for hydrolysis. Additionally, the photocatalytic properties of the obtained materials were evaluated by degradationvisible of Rhodamine B (RhB) under UV and visible light. The findings revealed that the mixed phase (anatase/rutile) of TiO2 on the cellulose demonstrated a superior photocatalytic efficiency (99.2%) compared to pure anatase (85.75%) and rutile (75.08%) when exposed to visible light.

Enhanced photocatalytic degradation of methylene blue dye using eco-friendly synthesized rGO@ZnO nanocomposites

Industrial chemical pollutants such as methylene blue (MB) dye are released into the water body and potentially cause harm to the human and aquatic biosphere. Therefore, this study aims to synthesize eco-friendly nanocatalysts, i.e., reduced graphene oxide (rGO), zinc oxide (ZnO), and reduced graphene oxide-zinc oxide (rGO@ZnO) nanocomposites, for efficient photocatalytic degradation of MB dye. A graphite rod was obtained from waste dry cell batteries for the electrochemical exfoliation synthesis of graphene oxide (GO) and rGO. For the eco-friendly synthesis of ZnO and rGO@ZnO nanocatalysts, Croton macrostachyus leaf extract was used as a reducing and capping agent. The synthesized nanocatalysts were characterized using a UV-Vis spectrophotometer, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy with energy-dispersive X-ray. The eco-friendly synthesized rGO, ZnO, and rGO@ZnO nanocatalysts were applied for the photocatalytic degradation of MB dye using direct sunlight irradiation. At optimum parameters, photocatalytic degradation of MB dye efficiency reached up to 66%, 96.5%, and 99.0%, respectively. Furthermore, kinetics of the photodegradation reaction based on rGO, ZnO, and rGO@ZnO nanocatalysts follow pseudo-first-order with a rate constant of 2.16 × 10-3 min-1, 4.97 × 10-3 min-1, and 5.03 × 10-3 min-1, respectively. Lastly, this study promotes a low catalyst load (20 mg) for the efficient photodegradation of MB dye.

Development of PSA@PS-TiO2 nanocomposite photocatalyst: structure, mechanism, and application using response surface designs and molecular modeling

Using periwinkle shell ash (PSA) and polystyrene (PS), a new-fangled PSA@PS-TiO₂ photocatalyst was fabricated. The morphological images of all the samples studied using a high-resolution transmission electron microscope (HR-TEM) showed a size distribution of 50-200 nm for all samples. The SEM-EDX showed that the membrane substrate of PS was well dispersed, confirming the presence of anatase/rutile phases of TiO₂, and Ti and O₂ were the major composites. Given the very rough surface morphology (atomic force microscopy (AFM)) due to PSA, the main crystal phases (XRD) of TiO₂ (rutile and anatase), low bandgap (UVDRS), and beneficial functional groups (FTIR-ATR), the 2.5 wt.% of PSA@PS-TiO₂ exhibited better photocatalytic efficiency for methyl orange degradation. The photocatalyst, pH, and initial concentration were investigated and the PSA@PS-TiO₂ was reused for five cycles with the same efficiency. Regression modeling predicted 98% efficiency and computational modeling showed a nucleophilic initial attack initiated by a nitro group. Therefore, PSA@PS-TiO₂ nanocomposite is an industrially promising photocatalyst for treating azo dyes, particularly, methyl orange from an aqueous solution.

An Overview of Photocatalytic Membrane Degradation Development

Environmental pollution has become a worldwide issue. Rapid industrial and agricultural practices have increased organic contaminants in water supplies. Hence, many strategies have been developed to address this concern. In order to supply clean water for various applications, high-performance treatment technology is required to effectively remove organic and inorganic contaminants. Utilizing photocatalytic membrane reactors (PMRs) has shown promise as a viable alternative process in the water and wastewater industry due to its efficiency, low cost, simplicity, and low environmental impact. PMRs are commonly categorized into two main categories: those with the photocatalyst suspended in solution and those with the photocatalyst immobilized in/on a membrane. Herein, the working and fouling mechanisms in PMRs membranes are investigated; the interplay of fouling and photocatalytic activity and the development of fouling prevention strategies are elucidated; and the significance of photocatalysis in membrane fouling mechanisms such as pore plugging and cake layering is thoroughly explored.

Noble metals (Pd, Ag, Pt, and Au) doped bismuth oxybromide photocatalysts for improved visible light-driven catalytic activity for the degradation of phenol

The doping of noble metals onto the semiconductor metal oxides has a great impact on the intrinsic properties of the materials. This present work reports the synthesis of noble metals doped BiOBr microsphere by a solvothermal method. The various characteristic findings reveal the effective incorporation of Pd, Ag, Pt, and Au onto the BiOBr and the performance of synthesized samples was test for the degradation of phenol over visible light. The Pd-doped BiOBr material showed enhanced phenol degradation efficacy, which is ∼4-fold greater than pure BiOBr. This improved activity was on reason of good photon absorption, lower recombination rate, and higher surface area facilitated by surface plasmon resonance. Moreover, Pd-doped BiOBr sample displayed good reusability and stability after 3 cycles of run. A plausible charge transfer mechanism for phenol degradation is disclosed in detail over Pd-doped BiOBr sample. Our findings disclose that the incorporation of noble metal as the electron trap is a feasible approach to enhance visible light activity of BiOBr photocatalyst used in phenol degradation. This work represents new vision interested in the outline and development of noble metal doped semiconductor metal oxides as a visible light material for the elimination of colorless toxins from untreated wastewater.

Designing Highly Active S-g-C3N4/Te@NiS Ternary Nanocomposites for Antimicrobial Performance, Degradation of Organic Pollutants, and Their Kinetic Study

The current research is about the synthesis of pure nickel sulfide, a series of Te (0, 0.5, 1, 1.5, 2, and 3 wt.%)-doped NiS (Te@NiS) nanoparticles (NPs), and a series of S-g-C3N4 (10, 30, 50, 70, and 80 wt.%)/Te@NiS nanocomposites (NCs), fabricated through a hydrothermal route. XRD and FTIR spectroscopic techniques demonstrated the successful synthesis of NPs and NCs. SEM-EDX images confirmed the flakelike structure and elemental constituents of the fabricated materials. Tauc plots were drawn, to calculate the band gaps of the synthesized samples. Te doping resulted in a significant reduction in the band gap of the NiS NPs. The photocatalytic efficiency of the NPs and NCs was investigated against MB, under sunlight. The results obtained for the photocatalytic activity, showed that 1%Te@NiS nanoparticles have an excellent dye degradation capacity in sunlight. This was made even better by making a series of SGCN/1% Te@NiS nanocomposites with different amounts of S-g-C3N4. When compared to NiS, Te@NiS, SGCN, and 70%SGCN/1%Te@NiS, the 70%SGCN/1%Te@NiS NCs have excellent antifungal ability. The higher impact of SGCN/Te@NiS, may be due to its enhanced ability to disperse and interact with the membranes and intracellular proteins of fungi. The 70%SGCN/1%Te@NiS NCs showed excellent antibacterial and photocatalytic efficiency. Thus, the 70%SGCN/1%Te@NiS NCs might prove fruitful in antibacterial and photocatalytic applications.

A review on plasmonic-based heterojunction photocatalysts for degradation of organic pollutants in wastewater

Organic pollutants in wastewater are the biggest problem facing the world today due to population growth, rapid increase in industrialization, urbanization, and technological advancement. There have been numerous attempts to use conventional wastewater treatment techniques to address the issue of worldwide water contamination. However, conventional wastewater treatment has a number of shortcomings, including high operating costs, low efficiency, difficult preparation, fast recombination of charge carriers, generation of secondary waste, and limited light absorption. Therefore, plasmonic-based heterojunction photocatalysts have attracted much attention as a promising method to reduce organic pollutant problems in water due to their excellent efficiency, low operating cost, ease of fabrication, and environmental friendliness. In addition, plasmonic-based heterojunction photocatalysts contain a local surface plasmon resonance that enhances the performance of photocatalysts by improving light absorption and separation of photoexcited charge carriers. This review summarizes the major plasmonic effects in photocatalysts, including hot electron, local field effect, and photothermal effect, and explains the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants. Recent work on the development of plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater is also discussed. Lastly, the conclusions and challenges are briefly described and the direction of future development of heterojunction photocatalysts with plasmonic materials is explored. This review could serve as a guide for the understanding, investigation, and construction of plasmonic-based heterojunction photocatalysts for various organic pollutants degradation.

GRAPHICAL ABSTRACT

Herein, the plasmonic effects in photocatalysts, such as hot electrons, local field effect, and photothermal effect, as well as the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants are explained. Recent work on plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater such as dyes, pesticides, phenols, and antibiotics is discussed. Challenges and future developments are also described.

Temperature- and pH-Responsive Polymeric Photocatalysts for Enhanced Control and Recovery

The emergence of heterogeneous photocatalysis has facilitated redox reactions with high efficiency, without compromising the recyclability of the photocatalyst. Recently, stimuli-responsive heterogeneous photocatalytic materials have emerged as a powerful synthetic tool, with simple and rapid recovery, as well as an enhanced dynamic control over reactions. Stimuli-responsive polymers are often inexpensive and easy to produce. They can be switched from an active "on" state to an inert "off" state in response to external stimuli, allowing the production of photocatalyst with adaptability, recyclability, and orthogonal control on different chemical reactions. Despite this versatility, the application of artificial smart material in the field of heterogeneous photocatalysis has not yet been maximized. In this Minireview, we will examine the recent developments of this emerging class of stimuli-responsive heterogeneous photocatalytic systems. We will discuss the synthesis route of appending photoactive components into different triggerable systems and, in particular, the controlled activation and recovery of the materials.

Phthalates - A family of plasticizers, their health risks, phytotoxic effects, and microbial bioaugmentation approaches

Phthalates are a family of reprotoxicant compounds, predominantly used as a plasticizer to improve the flexibility and longevity of consumable plastic goods. After their use these plastic products find their way to the waste disposal sites where they leach out the hazardous phthalates present within them, into the surrounding environment, contaminating soil, groundwater resources, and the nearby water bodies. Subsequently, phthalates move into the living system through the food chain and exhibit the well-known phenomenon of biological magnification. Phthalates as a primary pollutant have been classified as 1B reprotoxicants and teratogens by different government authorities and they have thus imposed restrictions on their use. Nevertheless, the release of these compounds in the environment is unabated. Bioremediation has been suggested as one of the ways of mitigating this menace, but studies regarding the field applications of phthalate utilizing microbes for this purpose are limited. Through this review, we endeavor to make a deeper understanding of the cause and concern of the problem and to find out a possible solution to it. The review critically emphasizes the various aspects of phthalates toxicity, including their chemical nature, human health risks, phytoaccumulation and entry into the food chain, microbial role in phthalate degradation processes, and future challenges.

Synthesis of novel graphene aerogel encapsulated bismuth oxyiodide composite towards effective removal of methyl orange azo-dye under visible light

Development of novel and eco-friendly composite photocatalysts for the efficient removal of contaminants from wastewater is the need of the hour. In this study, visible light responsive novel graphene aerogel/bismuth oxyiodide (GA/BiOI) composite was synthesized via low-temperature solvothermal method. The synthesized GA/BiOI composite was tested for methyl orange (MO) azo-dye degradation under visible light. The graphene aerogel nanosheets were wrapped onto the surface of the each individual BiOI microsphere, which encourages the interconnection charge transfer process. The light absorption properties of GA/BiOI composite were increased with the addition of graphene aerogel. The optimal 5%-GA/BiOI composite displayed higher MO removal efficiency, which is ∼2 fold more than the bare BiOI photocatalyst. This enhanced photocatalytic activity was on account of lower recombination rate of charge carriers, improved light absorption, and the high surface area. In addition, the 5%-GA/BiOI composite showed good stability until 3 cycles without deactivation. The plausible MO degradation mechanism was also proposed over GA/BiOI under visible light. This work provides a new perspective on the design and synthesis of graphene aerogel-based composite for environmental applications.

Direct Z-Scheme AgBr/β-MnO2 Photocatalysts for Highly Efficient Photocatalytic and Anticancer Activity

The preparation of visible light-responsive efficient photocatalysts for removing organic contaminants from water and killing cancer cells has gotten a lot of attention due to the growing global concern. In this study, we have successfully fabricated an efficient AgBr/β-MnO₂ nanocomposite via a facile deposition and precipitation method at room temperature. Techniques such as XRD, SEM-EDS, TEM, DRS, PL, EIS, ESR, and FTIR were used to determine the crystalline, structural, morphological, optical, and other properties. The SEM and TEM analyses reveal that AgBr NPs are decorated on the surface of β-MnO₂, which possesses rods with a sphere-like structure for AgBr/β-MnO₂. The EDX analysis confirms the existence of Mn, O, Ag, and Br elements in the nanocomposites without an extra peak, indicating that the synthesized samples are highly pure. The high photocatalytic performance of AgBr/β-MnO₂ could be attributed to the formation of Ag NPs and the construction of the Z-scheme heterojunction between AgBr and β-MnO₂. This may enhance fast light absorption and efficient photogenerated (e-/h+) pairs, as indicated by EIS and photoluminescence measurements, which in turn achieved high activity for the decomposition of MB (97%, in 12 min), RhB (98.9%, in 9 min), and paracetamol (80%, in 180 min), respectively. The kinetic model study proposed that the first-order model showed a better fit than the zero- and second-order for the photocatalytic decolorization of RhB dye. XRD analysis of 0.2 AgBr/β-MnO₂ before and after recycling confirms the high stability of the catalyst. HPLC results showed that no detectable by-products are produced through the decomposition of paracetamol. Interestingly, 0.2 AgBr/β-MnO₂ nanocomposites showed visible light-induced anticancer activity against A549 cancer cell lines. The mechanistic degradation pathway has been proposed using the involvement of active species like superoxide radicals (^-•O₂) and photoinduced holes (h⁺). The proposed work focuses on synthesizing effective photocatalysts in a less hazardous environment with superior biological activity.

Spatio-temporal photolysis rate profiles of UV254 irradiated toluene

The volatile organic compound (VOC) toluene is irradiated with a 254 nm UV source. The studied sample (1 mL) of toluene is equipped in a sealed quartz cuvette and inserted in one of the Michelson interferometer's arms. During a UV254 irradiation of 1 h, the variation in the toluene's refractive index profiles are monitored as a movement of Michelson interference fringes. These interferograms are recorded and digitally analyzed to produce their phase map distributions and, hence, reconstructing the refractive index profiles which are expressing the toluene's photolysis behavior. With increasing the UV254 irradiation time, the toluene's refractive index profiles exhibit both temporal and spatial decrease due to the production of benzyl radicals and the consequent oxidation of these radicals. The spatio-temporal refractive index and photolysis rate profiles of toluene are reconstructed and discussed.

Current Developments in the Effective Removal of Environmental Pollutants through Photocatalytic Degradation Using Nanomaterials

Photocatalysis plays a prominent role in the protection of the environment from recalcitrant pollutants by reducing hazardous wastes. Among the different methods of choice, photocatalysis mediated through nanomaterials is the most widely used and economical method for removing pollutants from wastewater. Recently, worldwide researchers focused their research on eco-friendly and sustainable environmental aspects. Wastewater contamination is one of the major threats coming from industrial processes, compared to other environmental issues. Much research is concerned with the advanced development of technology for treating wastewater discharged from various industries. Water treatment using photocatalysis is prominent because of its degradation capacity to convert pollutants into non-toxic biodegradable products. Photocatalysts are cheap, and are now emerging slowly in the research field. This review paper elaborates in detail on the metal oxides used as a nano photocatalysts in the various type of pollutant degradation. The progress of research into metal oxide nanoparticles, and their application as photocatalysts in organic pollutant degradation, were highlighted. As a final consideration, the challenges and future perspectives of photocatalysts were analyzed. The application of nano-based materials can be a new horizon in the use of photocatalysts in the near future for organic pollutant degradation.

Visible light-driven photocatalytic rapid degradation of organic contaminants engaging manganese dioxide-incorporated iron oxide three dimensional nanoflowers

Water pollution via hazardous organic pollutants poses a high threat to the environment and globally imperils aquatic life and human health. Therefore, the elimination of toxic organic waste from water sources is vital to ensure a healthy green environment. In the current work, we synthesized α-MnO₂-Fe₃O₄ 3D-flower like structure using a two-step hydrothermal method and explored the combination in a visible-light-assisted photocatalytic degrdation of dyes. The attained high specific surface area of 82 m²/g with mesoporous nature of α-MnO₂ and Fe₃O₄ together can generate more active sites after exposure to visible light, leading to remarkable photodegradation performance. Significantly, twofold higher dye (methylene blue, MB (94.8%/120 min; crystal violet, CV (93.7%/120 min)) and drug (LVO 91%/90 min) photodegradations were observed with α-MnO₂-Fe₃O₄ as catalyst than pure α-MnO₂ and Fe₃O₄ at pH 6, respectively. This is attributed to the higher surface area and synergistic effect between Mn and Fe. More than 85% stability was observed with optimized catalysts employing MB and CV dyes, demonstrating the excellent reusability of the α-MnO₂-Fe₃O₄. The underlying mechanism indicates that the formation of reactive oxygen species predominantly plays a role in the photodegradation of dyes under visible light. Consequently, these new insights will shed light on the practical applications of the α-MnO₂-Fe₃O₄ 3D-flower-like spherical structure for eco-friendly remediation via wastewater treatment.

Graphitic carbon nitride/NH2-MIL-101(Fe) composite for environmental remediation: Visible-light-assisted photocatalytic degradation of acetaminophen and reduction of hexavalent chromium

Herein, an efficient photocatalyst composed of graphitic carbon nitrate and iron-based metal-organic framework (g-C₃N₄/NH₂-MIL-101(Fe)) composite was fabricated by a solvothermal method for the degradation of acetaminophen (AAP) and reduction of Cr(VI) under sunlight illumination. The composite was confirmed by X-ray diffraction. UV-visible spectra showed that the bare g-C₃N₄, pure Fe-MOF, and composite harvest solar light effectively. The photocatalytic experiment indicated that the composite exhibited superior reduction efficiency of Cr(VI) (66%) compared to the bare g-C₃N₄ (35%) and pure Fe-MOF (51%) at pH 7. As the pH decreases from 9 to 2, the reduction efficiency increased. The highest Cr(VI) reduction (91%) was observed at pH 2. On the other hand, the catalyst degraded 94% of AAP at pH 7 compared to the bare g-C₃N₄ (42%) and pure Fe-MOF (60%) in the presence of hydrogen peroxide. A radical scavenger experiment endorsed that the generation of superoxide radicals was the main reason for the AAP degradation. The cyclic stability test indicated that there was no substantial decrease in the degradation efficiency of AAP after ten repeated cycles. The kinetic studies showed that the photodegradation of AAP and reduction Cr(VI) was well-fitted to the first-order kinetics. Gas chromatography-mass spectrometry analysis showed that hydroquinone, aliphatic carboxylic acids, monohydroxy, and dihydroxy paracetamol were the main products formed as a result of such degradation process. Therefore, the iron-based MOF and their composites can be used as effective photocatalysts for pollutants degradation.

Nickel in soil and water: Sources, biogeochemistry, and remediation using biochar

Nickel (Ni) is a potentially toxic element that contaminates soil and water, threatens food and water security, and hinders sustainable development globally. Biochar has emerged as a promising novel material for remediating Ni-contaminated environments. However, the potential for pristine and functionalized biochars to immobilize/adsorb Ni in soil and water, and the mechanisms involved have not been systematically reviewed. Here, we critically review the different dimensions of Ni contamination and remediation in soil and water, including its occurrence and biogeochemical behavior under different environmental conditions and ecotoxicological hazards, and its remediation using biochar. Biochar is effective in immobilizing Ni in soil and water via ion exchange, electrostatic attraction, surface complexation, (co)precipitation, physical adsorption, and reduction due to the biogeochemistry of Ni and the interaction of Ni with surface functional groups and organic/inorganic compounds contained in biochar. The efficiency for Ni removal is consistently greater with functionalized than pristine biochars. Physical (e.g., ball milling) and chemical (e.g., alkali/acidic treatment) activation achieve higher surface area, porosity, and active surface groups on biochar that enhance Ni immobilization. This review highlights possible risks and challenges of biochar application in Ni remediation, suggests future research directions, and discusses implications for environmental agencies and decision-makers.

Photocatalytic exoskeleton: Chitin nanofiber for retrievable and sustainable TiO2 carriers for the decomposition of various pollutants

Loading a photocatalytic TiO₂ to organic carriers has been desired for volumetric TiO₂ incorporation, facile retrieval, and sustainable utilization. Traditionally, suspended TiO₂ nanoparticles or its thin film on two-dimensional substrate are popularly fabricated for pollutants decomposition without carriers; due to poor thermomechanical properties of the organic carriers. Herein, a combination of the chitin nanofiber carrier and atomic layer deposition proves relevance for formation of anatase TiO₂ thin layer so that photocatalytic decomposition in three-dimensional surface. Moreover, chitin nanofiber is capable of holding the TiO₂ nanoparticles for multiple cycles of photocatalysis. Those types of TiO₂ show characteristic degradation performance for gaseous (acetaldehyde) and aqueous pollutants (4-chlorophenol and rhodamine B). After catalytic reaction, chitin/TiO₂ is retrievable owing to carrier's robustness even in water without TiO₂ aggregation and loss. This work suggests that chitin-based photocatalyst is applicable to numerous pollutants through chitin's relatively high chemical resistance and stably wedged TiO₂ during photocatalytic reaction.

Solvent-mediated synthesis of BiOI with a tunable surface structure for effective visible light active photocatalytic removal of Cr(VI) from wastewater

The present study investigated the effect of various solvents on the tunable surface morphology and photocatalytic activity (PCA) of bismuth oxyiodide (BiOI), which could be used for the reduction of Cr(VI) under visible light irradiation (VLI). BiOI samples exhibiting different morphologies, i.e., two-dimensional square-like nanosheet and three-dimensional hierarchical flower-like morphology, were synthesized by a hydro/solvothermal process using different solvents, namely H₂O, MeOH, EtOH, and ethylene glycol (EG). The crystal structure, surface morphology, surface area, light-absorption capability, and recombination rate of the photogenerated charge carriers were examined by X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller analysis, UV-vis diffuse reflectance spectroscopy, photoluminescence, and transient photocurrent analyses, respectively. The BiOI sample fabricated in EG showed excellent photocatalytic efficiency (~99%) for the reduction of Cr(VI) after 90 min under VLI. The enhanced PCA demonstrated that the high surface area and well-structured surface characteristics of flower-like 3D BiOI microspheres played important roles in the photoreduction process. Moreover, a plausible mechanism for the reduction of Cr(VI) over the EG-BiOI photocatalyst was proposed. The results of the PCA evaluation and recycle test revealed that 3D EG-BiOI microspheres could serve as promising materials for the efficient removal of Cr(VI) from wastewater. Additionally, EG-BiOI could be utilized in other environmental remediation processes.

Cobalt Nanoparticles Supported on Reduced Amine-Functionalized Graphene Oxide for Catalytic Reduction of Nitroanilines and Organic Dyes

In our study, a simple strategy to fabricate an efficient cobalt-based nanocatalyst is reported. The as-fabricated cobalt nanoparticles (Co NPs) that supported on reduced amine-functionalized graphene oxide (Co@RGO-NH[Formula: see text] have been fabricated through reduction of Co[Formula: see text] and GO-NH2 by sodium borohydride under mild conditions. The morphology, elemental analysis, chemical composition, surface area and magnetic property of the as-fabricated Co@RGO-NH2 nanocatalyst have been investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) and vibrating sample magnetometer (VSM), respectively. Characterization showed that Co@RGO-NH2 nanocatalyst possesses a high surface area (232.05 m2/g) and good magnetic property. Obviously, the as-fabricated Co@RGO-NH2 nanocatalyst exhibited a fascinating catalytic activity towards the catalytic reduction of different substituted nitro anilines pollutants ([Formula: see text]-nitroaniline, [Formula: see text]-nitroaniline and [Formula: see text]-nitroaniline), as well as, the degradation of cationic methylene blue and anionic Congo red dyes. Furthermore, the reused Co@RGO-NH2 nanocatalyst has shown high catalytic activity for all the catalytic reactions even after the fifth cycle, asserting the high stability of the as-fabricated heterogeneous catalyst.

Enhanced photocatalytic activity at multidimensional interface of 1D-Bi2S3@2D-GO/3D-BiOI ternary nanocomposites for tetracycline degradation under visible-light

Structural dimensionality and surface morphology are key properties that greatly affect the functionalities of materials. Herein, we report a synthesis of dimensionally coupled ternary nanocomposites from three-dimensional (3D) bismuth oxyiodide (BiOI), two-dimensional (2D) graphene oxide (GO), and one-dimensional (1D) bismuth sulfide (Bi₂S₃) nanomaterials for tetracycline degradation under visible-light irradiation. The 2%-Bi₂S₃@1%-GO/BiOI ternary nanocomposites show higher degradation efficiency than neat 3D-BiOI. The coupling of neat 1D-Bi₂S₃ with the 1%-GO/BiOI binary nanocomposite does not increase the specific surface area of the resulting 2%-Bi₂S₃@1%-GO/3D-BiOI ternary nanocomposite, but enhances notably its charge carrier separation and migration, according to the analysis of the higher photocurrent, smaller arc radius of the electrochemical impedance spectroscopy and lower photoluminescence intensity. The observed results suggest that the combination of dimensionally coupled composites provides a synergistic effect through an efficient charge transfer process. This work offers new insights into the design and construction of dimensionally coupled ternary nanocomposites for environmental remediation applications.

A facile synthesis of nano AgBr attached potato-like Ag2MoO4 composite as highly visible-light active photocatalyst for purification of industrial waste-water

In recent times, silver (Ag) based semiconductors have been gained a lot of attention as photocatalysts for industrial waste-water treatment owing to their strong visible-light absorbing capability and small bandgap energy. Therefore, herein, we have designed and utilized a one-pot hydrothermal approach to the synthesis of nano-sized AgBr covered potato-like Ag₂MoO₄ composite photocatalysts for the elimination of organic wastes from the aquatic environment. To achieve a high-performance photocatalyst, a sequence of AgBr/Ag₂MoO₄ composites were acquired with varying CTAB from 1 to 4 mmol. Furthermore, the photocatalytic activity of these photocatalysts was confirmed from decomposing of Rhodamine B (RhB) dye via visible-light elucidation. It can be noticed that AgBr/Ag₂MoO₄ composites exhibited significantly increased photocatalytic behaviour as compared with pure AgBr and Ag₂MoO₄. Surprisingly, the AgBr/Ag₂MoO₄ composite obtained from 2 mmol CTAB was eliminated the entire RhB dye with 25 min. Also, the recycling experiment indicates the AgBr/Ag₂MoO₄ composite has an excellent photo-stability. Accordingly, the as-acquired AgBr/Ag₂MoO₄ composite would be a suitable photocatalytic material for industrial waste-water purification.

Constructing CuNi dual active sites on ZnIn2S4 for highly photocatalytic hydrogen evolution

Novel CuNi bimetal-modified ZnIn₂S₄ photocatalysts with enhanced photocatalytic hydrogen evolution performance have been explored. The possible mechanism of the synergistic effect and spillover effect between Cu and Ni were proposed.

Enhancement of Photocatalytic Activities with Nanosized Polystyrene Spheres Patterned Titanium Dioxide Films for Water Purification

For environmental applications, such as water and air purification utilizing photocatalysts, we synthesized patterned titanium dioxide (TiO2) thin films using polystyrene (PS) spheres. This was primarily done to enhance the surface area and photocatalytic activities. TiO2 thin films were deposited on silicon wafers attached to variously sized PS spheres via the spin coating method and were annealed at 600 °C. The processing step involved patterning and coating a TiO2 sol–gel. The photocatalytic performance was analyzed using an UV–visible spectrophotometer. Within 20 min, a high catalytic efficiency (98% removal) with a 20-time faster decomposition rate of the malachite green (MG) solution than that of the nonpatterned TiO2 was obtained from the patterned TiO2 with 400 nm sized PS due to the large surface area. In addition, the phenol in the water removed as much as 50% within 2 h with the same photocatalyst, which was expected to be one of the strong candidates to be applied to the next generation of photocatalysts for water purification.

Recent Developments of Advanced Ti3+-Self-Doped TiO2 for Efficient Visible-Light-Driven Photocatalysis

Research into the development of efficient semiconductor photocatalytic materials is a promising approach to solving environmental and energy problems worldwide. Among these materials, TiO2 photocatalysts are one of the most commonly used due to their efficient photoactivity, high stability, low cost and environmental friendliness. However, since the UV content of sunlight is less than 5%, the development of visible light-activated TiO2-based photocatalysts is essential to increase the solar energy efficiency. Here, we review recent works on advanced visible light-activated Ti3+-self-doped TiO2 (Ti3+–TiO2) photocatalysts with improved electronic band structures for efficient charge separation. We analyze the different methods used to produce Ti3+–TiO2 photocatalysts, where Ti3+ with a high oxygen defect density can be used for energy production from visible light. We categorize advanced modifications in electronic states of Ti3+–TiO2 by improving their photocatalytic activity. Ti3+–TiO2 photocatalysts with large charge separation and low recombination of photogenerated electrons and holes can be practically applied for energy conversion and advanced oxidation processes in natural environments and deserve significant attention.

Mesoporous CuS nanospheres decorated rGO aerogel for high photocatalytic activity towards Cr(VI) and organic pollutants

Mesoporous CuS nanospheres (CuS-NS) decorated reduced graphene oxide (rGO) aerogel composite (3D CuS-NS/rGO) was prepared by chemical reduction process and used for the synergistic removal of Cr(VI) and cationic dyes. The porosity of the as prepared samples was determined by Bruner-Emmet-Teller (BET) surface Area. Structural and morphological properties were studied by Scanning electron microscopy (SEM) and Transmission electron microscope (TEM). These analysis revealed that the as obtained hybrid CuS-NS/rGO composite with three dimensional (3D) structure was composed of mesoporous CuS nanospheres clearly induced onto the interconnected network of rGO sheets. The photocatalytic performance of 3D CuS-NS/rGO composites was studied against the reduction of Cr(VI) and degradation of cationic dyes (MB and RhB) under visible light spectrum. Excellent photocatalytic performance was observed with 3D CuS/rGO hybrid composites as compared to the as prepared CuS nanospheres. This high photocatalytic activity was attributed to the efficient charge transfer from the mesoporous CuS nanospheres to nanosheets of rGO, which was confirmed by UV-Vis spectrometry (UV-Vis). Electrical conductivity of the prepared samples was also investigated using electrochemical impedance spectroscopy (EIS). Additionally, the as prepared hybrid composites was easy to recycle by using simple tweezers and can be a best candidate for industrial applications.

MOF-Beads Containing Inorganic Nanoparticles for the Simultaneous Removal of Multiple Heavy Metals from Water

Pollution of water with heavy metals is a global environmental problem whose impact is especially severe in developing countries. Among water-purification methods, adsorption of heavy metals has proven to be simple, versatile, and cost-effective. However, there is still a need to develop adsorbents with a capacity to remove multiple metal pollutants from the same water sample. Herein, we report the complementary adsorption capacities of metal-organic frameworks (here, UiO-66 and UiO-66-(SH)₂) and inorganic nanoparticles (iNPs; here, cerium-oxide NPs) into composite materials. These adsorbents, which are spherical microbeads generated in one step by continuous-flow spray-drying, efficiently and simultaneously remove multiple heavy metals from water, including As(III and V), Cd(II), Cr(III and VI), Cu(II), Pb(II), and Hg(II). We further show that these microbeads can be used as a packing material in a prototype of a continuous-flow water treatment system, in which they retain their metal-removal capacities upon regeneration with a gentle acidic treatment. As proof-of-concept, we evaluated these adsorbents for purification of laboratory water samples prepared to independently recapitulate each of two strongly polluted rivers: the Bone (Indonesia) and Buringanga (Bangladesh) rivers. In both cases, our microbeads reduced the levels of all the metal contaminants to below the corresponding permissible limits established by the World Health Organization (WHO). Moreover, we demonstrated the capacity of these microbeads to lower levels of Cr(VI) in a water sample collected from the Sarno River (Italy). Finally, to create adsorbents that could be magnetically recovered following their use in water purification, we extended our spray-drying technique to simultaneously incorporate two types of iNPs (CeO₂ and Fe₃O₄) into UiO-66-(SH)₂, obtaining CeO₂/Fe₃O₄@UiO-66-(SH)₂ microbeads that adsorb heavy metals and are magnetically responsive.

Degradation of bisphenol A by persulfate coupled with dithionite: Optimization using response surface methodology and pathway

The degradation efficiency of bisphenol A (BPA) was investigated in the process of persulfate (PS) coupled with dithionite (DTN) as a function of concentration of BPA, PS, DTN and solution pH. A simple response surface methodology (RSM) based on central composite design (CCD) was employed to determine the influence of individual and interaction of above variables and the optimum processing parameters. It is satisfactory of a quadratic model with low probabilities (<0.0001) at a confidence level of 95% to predict the BPA degradation efficiency. The model was well fitted to the actual data and the correlation coefficients of R² and R²-adj were 0.9270 and 0.8885, respectively. In addition, the obtained optimum conditions for BPA degradation were 1.79 μM, 131.77 μM, 93.64 μM for BPA, PS, DTN and pH = 3.62, respectively. It achieved a degradation efficiency >90% within 150 min. Moreover, the trapping experiment of active species demonstrated that SO₄^·- and ·OH were the dominant species and natural water matrix showed an obvious inhibition effect on BPA degradation. The BPA degradation pathway was predicted based on GC-MS results in this study.

Photocatalytic properties of hybrid materials based on a multicharged polymer matrix with encored TiO2 and noble metal (Pt, Pd or Au) nanoparticles

In this study, we report a synthesis of new nanocomposites, wherein TiO₂ is introduced into multicharged polymeric matrix and covered with noble metals (Pt, Pd or Au) for the photocatalytic application.

Galvanic replacement of liquid metal Galinstan with copper for the formation of photocatalytically active nanomaterials

Galvanic replacement of liquid metal Galinstan under mechanical agitation with copper creates a multi-elemental system that is photocatalytically active for the degradation of organic dyes where reuseability is achieved via immobilisation on a solid support.

Synthesis and degradation kinetics of TiO2/GO composites with highly efficient activity for adsorption and photocatalytic degradation of MB

Poriferous TiO₂/GO (denoted as TGO-x%) photocatalysts with ultrathin grapheme oxide (GO) layer were prepared by a hydrothermal method, the adsorption and photocatalytic degradation and its kinetics about Methylene blue(MB) were studied systematically. All the TGO-x% showed improved adsorption and photodegradation performance. TGO-25% had excellent adsorptivity while TGO-20% exhibit the highest visible light photocatalytic degradation activity. The adsorption capacity for TGO-25% was 20.25 mg/g_catalyst along with the k₁ was about 0.03393 min·g_catalyst/mg, this enhancement was mainly owing to the strong adsorption capacity of GO and the stacking structure of sheets and nanoparticles. GO sheets prevented the agglomeration of TiO₂ particles and TiO₂ nanoparticles also prevented the agglomeration of GO sheets, which could provides greater surface area. Besides, the remarkably superior photodegradation activity of TiO₂/GO composites is mainly attribute to the strong absorption of visible light and the effective charge separation revealed by the photoluminescence, the total removal rate of MB is 97.5% after 35 min adsorption and 140 min degradation, which is 3.5 times higher than that of TiO₂.

Sustainable hydrogen production for the greener environment by quantum dots-based efficient photocatalysts: A review

Nano-size photocatalysts exhibit multifunctional properties that opened the door for improved efficiency in energy, environment, and health care applications. Among the diversity of catalyst Quantum dots are a class of nanomaterials having a particle size between 2 and 10 nm, showing unique optoelectrical properties that are limited to some of the metal, metal oxide, metal chalcogenides, and carbon-based nanostructures. These unique characteristics arise from either pristine or binary/ternary composites where noble metal/metal oxide/metal chalcogenide/carbon quantum dots are anchored on the surface of semiconductor photocatalyst. It emphasized that properties, as well as performance of photocatalytic materials, are greatly influenced by the choice of synthesis methods and experimental conditions. Among the chemical methods, photo-deposition, precipitation, and chemical reduction, are the three most influential synthesis approaches. Further, two types of quantum dots namely metal based and carbon-based materials have been highlighted. Based on the optical, electrical and surface properties, quantum dots based photocatalysts have been divided into three categories namely (a) photocatalyst (b) co-catalyst and (c) photo-sensitizer. They showed enhanced photocatalytic performance for hydrogen production under visible/UV-visible light irradiation. Often, pristine metal chalcogenides as well as metal/metal oxide/carbon quantum dots attached to a semiconductor particle exhibit enhanced the photocatalytic activity for hydrogen production through absorption of visible light. Alternatively, noble metal quantum dots, which provide plenty of defects/active sites facilitate continuous hydrogen production. For instance, production of hydrogen in the presence of sacrificial agents using metal chalcogenides, metal oxides, and coinage metals based catalysts such as CdS/MoS₂ (99,000 μmol h^-1g^-1) TiO₂-Ni(OH)₂ (47,195 μmol h^-1g^-1) and Cu/Ag-TiO₂ nanotubes (56,167 μmol h^-1g^-1) have been reported. Among the carbon-based nanostructures, graphitic C₃N₄ and carbon quantum dots composites displayed enhanced hydrogen gas (116.1 μmol h^-1) production via overall water splitting. This review accounts recent findings on various chemical approaches used for quantum dots synthesis and their improved materials properties leading to enhanced hydrogen production particularly under visible light irradiation. Finally, the avenue to improve quantum efficiency further is proposed.

3D graphene-based gel photocatalysts for environmental pollutants degradation

Enormous research interest is devoted to fabricating three-dimensional graphene-based gels (3D GBGs) toward improved conversion of solar energy by virtue of the intrinsic properties of single graphene and 3D porous structure characteristics. Here, this concise minireview is primarily focused on the recent progress on applications of 3D GBGs, including aerogels and hydrogels, in photocatalytic degradation of pollutants from water and air, such as organic pollutants, heavy metal ions, bacteria and gaseous pollutants. In particular, the preponderances of 3D GBG photocatalysts for environmental pollutants degradation have been elaborated. Furthermore, in addition to discussing opportunities offered by 3D GBG composite photocatalysts, we also describe the existing problems and the future direction of 3D GBG materials in this burgeoning research area. It is hoped that this review could spur multidisciplinary research interest for advancing the rational utilization of 3D GBGs for practical applications in environmental remediation.