Comparative analysis of toxicity reduction of wastewater in twelve industrial park wastewater treatment plants based on battery of toxicity assays

Biocathode-anode cascade system in PRB: Efficient degradation of p-chloronitrobenzene in groundwater

The consistent presence of p-chloronitrobenzene (p-CNB) in groundwater has raised concerns regarding its potential harm. In this study, we developed a biocathode-anode cascade system in a permeable reactive barrier (BACP), integrating biological electrochemical system (BES) with permeable reactive barrier (PRB), to address the degradation of p-CNB in the groundwater. BACP efficiently accelerated the formation of biofilms on both the anode and cathode using the polar periodical reversal method, proving more conducive to biofilm development. Notably, BACP demonstrated a remarkable p-CNB removal efficiency of 94.76 % and a dechlorination efficiency of 64.22 % under a voltage of 0.5 V, surpassing the results achieved through traditional electrochemical and biological treatment processes. Cyclic voltammetric results highlighted the primary contributing factor as the synergistic effect between the bioanode and biocathode. It is speculated that this system primarily relies on bioelectrocatalytic reduction as the predominant process for p-CNB removal, followed by subsequent dechlorination. Furthermore, electrochemical and microbiological tests demonstrated that BACP exhibited optimal electron transfer efficiency and selective microbial enrichment ability under a voltage of 0.3-0.5 V. Additionally, we investigated the operational strategy for initiating BACP in engineering applications. The results showed that directly introducing BACP technology effectively enhanced microbial film formation and pollutant removal performance.

Theoretical and experimental studies on photocatalytic removal of methylene blue (MetB) from aqueous solution using oyster shell synthesized CaO nanoparticles (CaONP-O)

The development of technologies for the removal of dye from aqueous solution is most desirable if the end product is relatively green (i.e., environmentally friendly). Photodegradation (as one of such technology) and photolysis (without the catalyst) was applied to investigate the role of sol-gel synthesized calcium oxide nanoparticle (using the oyster shell as the precursor). The results obtained gave substantial evidence that calcium oxide nanoparticles catalyzed the degradation of the methylene blue dye up to a maximum percentage of 98 % removal. Degradation efficiency displayed a strong dependency on time, initial dye concentration, catalyst load, pH, and ionic strength. Chi-square and sum of square error analysis indicated that the photodegradation kinetics fitted the Langmuir-Hinshelwood, first order, and pseudo first-order models best. The half-life of the dye was significantly reduced from hours to minutes due to photocatalysis. Quantum chemical calculations indicated that the degradation proceeded through adsorption, deformation/degradation, and desorption through the chloride end of the molecule linked to the calcium active center of the catalyst. Results from Fukui functions and molecular descriptors analysis confirmed the mechanism of photocatalysis.

Review of ecologically relevant in vitro bioassays to supplement current in vivo tests for whole effluent toxicity testing - Part 1: Apical endpoints

Whole effluent toxicity (WET) testing is commonly used to ensure that wastewater discharges do not pose an unacceptable risk to receiving environments. Traditional WET testing involves exposing animals to (waste)water samples to assess four major ecologically relevant apical endpoints: mortality, growth, development, and reproduction. Recently, with the widespread implementation of the 3Rs to replace, reduce and refine the use of animals in research and testing, there has been a global shift away from in vivo testing towards in vitro alternatives. However, prior to the inclusion of in vitro bioassays in regulatory frameworks, it is critical to establish their ecological relevance and technical suitability. This is part 1 of a two-part review that aims to identify in vitro bioassays that can be used in WET testing and relate them to ecologically relevant endpoints through toxicity pathways, providing the reader with a high-level overview of current capabilities. Part 1 of this review focuses on four apical endpoints currently included in WET testing: mortality, growth, development, and reproduction. For each endpoint, the link between responses at the molecular or cellular level, that can be measured in vitro, and the adverse outcome at the organism level were established through simplified toxicity pathways. Additionally, literature from 2015 to 2020 on the use of in vitro bioassays for water quality assessments was reviewed to identify a list of suitable bioassays for each endpoint. This review will enable the prioritization of relevant endpoints and bioassays for incorporation into WET testing.

Bioassay-based identification and removal of target and suspect toxicants in municipal wastewater: Impacts of chemical properties and transformation

Municipal wastewater contains numerous chemicals and transformation products with highly diverse physiochemical properties and intrinsic toxicity; thus, it is imperative but challenging to identify major toxicants. Herein, toxicity identification evaluation (TIE) was applied to identify major toxicants in a typical municipal wastewater treatment plant (WWTP). Impacts of chemical properties on the removal of contaminants and toxicity at individual treatment stages were also examined. The WWTP influent caused 100% death of Daphnia magna and zebrafish embryos, and toxicity characterization suggested that organics, metals, and volatiles all contributed to the toxicity. Toxicity identification based on 189 target and approximately one-thousand suspect chemicals showed that toxicity contributions of organic contaminants, metals, and ammonia to D. magna were 77%, 4%, and 19%, respectively. Galaxolide, pyrene, phenanthrene, benzo[a]anthracene, fluoranthene, octinoxate, silver, and ammonia were identified as potential toxicants. Comparatively, the detected transformation products elicited lower toxicity than their respective parent contaminants. In contrast, the analyzed contaminants showed negligible contributions to the toxicity of zebrafish embryos. Removal efficiencies of these toxicants in WWTP were highly related to their hydrophobicity. Diverse transformation and removal efficiencies of contaminants in WWTPs may influence the chemical compositions in effluent and ultimately the risk to aquatic organisms in the receiving waterways.

In vitro genotoxic and mutagenic effects of water samples from Sapucaia and Esteio streams (Brazil) under the influence of different anthropogenic activities

Pollution of aquatic ecosystems is associated with the discharge of mainly industrial and urban effluents, which may cause damage to public health. This study aims to evaluate the cytotoxic, genotoxic, and mutagenic potential of surface water samples under the influence of different anthropogenic effluents in a human-derived liver cell line (HepG2). Samples were collected in Esteio and Sapucaia streams (Rio Grande do Sul; Brazil), which flow into the Sinos River, a source of water supply for more than one million people. Physicochemical and microbiological analyses were performed as well as an analysis of inorganic elements using the PIXE technique (Particle-Induced X-Ray Emission). The presence of pharmaceutical compounds and caffeine was evaluated by gas chromatography coupled to mass spectrometry. The cytotoxicity, genotoxicity, and mutagenicity of the samples were evaluated in HepG2 cells by cell viability assays, alkaline Comet Assay and Cytokinesis-block micronucleus (CBMN) assay. We verified alterations in the physicochemical and microbiological parameters and detected caffeine, diethyltoluamide, and different inorganic elements that corresponded to elements from domestic and industrial effluents and agricultural runoff. Although the samples in the concentration used were not cytotoxic, water samples from all sites induced DNA damage. However, it is difficult to attribute these damages to a specific substance since the factors are a complex mixture of different compounds. Despite this, it is observed that both urban and industrial contributions had a similar effect in the cells evaluated. Such results demonstrate the need to perform biomonitoring of surface waters under anthropogenic influence, especially those that flow into rivers that are a source of public supply water. We also highlight the need for research into emerging pollutants in these aquatic environments.

Tracking pollutants in a municipal sewage network impairing the operation of a wastewater treatment plant

This work provides a screening of organic contaminants and characterization of the dissolved organic matter in the sewer network until the municipal wastewater treatment plant (WWTP), identifying the network areas with a higher degree of contamination and their impact on the WWTP performance, particularly in the activated sludge reactor. Three monitoring campaigns were carried out at six selected locations of the sewage system (PVZ-1, PVZ-2, PS-F, PS-VC, CP-VC, and PS-T), influent (WWTP_INF) and effluent (WWTP_EFF) of the WWTP. Advanced analytical techniques were employed, namely excitation/emission matrix fluorescence-parallel factor analysis (EEM-PARAFAC), size exclusion chromatography with organic carbon detector (SEC-OCD), and liquid chromatography with high-resolution-mass spectrometric detection (LC-HRMS). EEM-PARAFAC showed higher fluorescence intensity for the protein-like component (C2), particularly at CP-VC (near seafood industries) associated with the presence of surfactants (~50 mg/L). SEC-OCD highlighted the WWTP efficiency in removing low molecular weight acids and neutrals. LC-HRMS tentatively identified 108 compounds of emerging concern (CEC) and similar detection patterns were obtained for all wastewater samples, except for PVZ-2 (lower detection), many of which occurred in the effluent. Eight CECs included on relevant Watch-Lists were detected in all WWTP_EFF samples. Furthermore, 111 surfactants were detected, the classes more frequently found being alcohol ethoxylates (AEOs), nonylphenol polyethoxylates (NPEOs) and linear alkylbenzene sulphonates (LAS). The continuous presence of LAS and NPEOs allied to surfactants concentrations in the WWTP_INF of 15-20 mg/L, with CP-VC location (linked with food industries) as an important contributor, explain the morphological changes in the activated sludge and high LAS content in the dewatered sludge, which may have impacted WWTP performance.

Risk assessment and ecotoxicological diagnosis of soil from a chemical industry park in Nanjing, China

Soil pollution due to the activities of industrial parks, is becoming an increasingly serious issue, particularly throughout China. Therefore, it is essential to explore the soil pollution characteristics and its ecotoxicological effects on model species, such as higher plant species, in typical industrial areas. In this study, concentrations of heavy metals and polycyclic aromatic hydrocarbons (PAHs) were examined in the soil collected from 10 sampling sites at a chemical industry park in Nanjing, China. The pollution index was used to assess the heavy metal pollution level of soils, while the hazard index (HI) and carcinogenic risk index (RI) were calculated to assess the human health risk of soil PAHs. In addition, wheat (Triticum aestivum L.) was used as the model species to evaluate the ecotoxicological effects of polluted soil in pot experiments. Results showed that the content of heavy metals and PAHs varied greatly in soil samples, among which the heavy metal pollution at S1, S2 and S3 was the most serious. The health risk assessment of PAHs indicated that non-carcinogenic and carcinogenic values for all soil samples were below the threshold levels. Statistical analysis of the correlation between contaminated soil and toxic effects in wheat found that the significance values of regression equations were all less than 0.05 for chlorophyll content, peroxidase (POD) and amylase (AMS) activity. This indicates that the chlorophyll content, POD and AMS activity in wheat leaves could be suitable biomarkers for evaluation of the combined toxicity of multiple pollutants. This study provides a reference for future research on the risk assessment of soil containing multiple pollutants from industrial chemical parks.

A Scientometric Study on Industrial Effluent and Sludge Toxicity

The growth of industrialization has led to an increase in the production of highly contaminated wastewater. Industrial wastewater contains highly complex compounds varying in characteristics and required to be treated before its discharge into a water medium from various industries. However, the efficiency of the treated wastewater from the toxicity reduction perspective is unclear. In order to overcome this barrier, toxicity assessment of the industrial wastewater before and after treatment is crucial. Thus, in this study, a scientometric analysis has been performed on the toxicity assessment of industrial wastewater and sludges, which have been reported in the literature. Web of Science (WoS) core collection database has been considered the main database to execute this analysis. Via the search of pre-researched keywords, a total number of 1038 documents were collected, which have been published from 1951 to 2020. Via CiteSpace software and WoS analyser, these documents went under analysis regarding some of the scientometry criteria, and the detailed results obtained are provided in this study. The total number of published documents on this topic is relatively low during such a long period of time. In conclusion, the need for more detailed contributions among the scientific and industrial communities has been felt.

H9c2(2-1)-based sulforhodamine B assay as a possible alternative in vitro platform to investigate effluent and metals toxicity on fish

To overcome restrictions on the use of fish in toxicity testing, the present study proposes to compare the 50% growth inhibition potential (EC₅₀) of four types of effluents on the rat cardiomyoblast H9c2(2-1) cell line by using the sulforhodamine B (SRB) cell mass colorimetric assay, with the corresponding fish lethal test results. Our objective was to evaluate if H9c2(2-1) cells shows comparable sensitivities, in both relative and absolute terms, to those provided by fish. In parallel, this study also compared the results of the chemical characterization with the legislation in force for environmental protection against effluent release into the receiving environment. Moreover, we tested the H9c2(2-1)-based SRB assays with the metals of concern found in the effluent samples. Both fish and cell assays showed the same toxicity rank for effluents: Metal > Oil > Municipal > Paper, and it should be stressed that the complementarity of using chemical and biological data represents a step forward to guarantee both environmental and human safety, since the chemical characterization showed a different toxicity rank: Metal > Municipal > Oil > Paper. Regarding metal elements, the short-term fish results showed a toxicity rank non-comparable with the rank obtained for cells. Nevertheless, the gathered results reveal the potentiality of the in vitro H9c2(2-1) platform as an alternative for fish lethal testing to assess, in absolute terms, the toxicity of effluents, particularly municipal effluents, and metals.

Effect-based evaluation of ozone treatment for removal of micropollutants and their transformation products in waste water

The aim of this interdisciplinary research project in North Rhine-Westphalia (NRW), Germany, entitled "Elimination of pharmaceuticals and organic micropollutants from waste water" involved the conception of cost-effective and innovative waste-water cleaning methods. In this project in vitro assays, in vivo assays and chemical analyses were performed on three municipal waste-water treatment plants (WWTP). This publication focuses on the study of the in vitro bioassays. Cytotoxic, estrogenic, genotoxic and mutagenic effects of the original as well as enriched water samples were monitored before and after wastewater treatment steps using MTT and PAN I, ER Calux and A-YES, micronucleus and Comet assays as well as AMES test. In most cases, the measured effects were reduced after ozonation, but in general, the biological response depended upon the water composition of the WWTP, in particular on the formed by-products and concentration of micropollutants. In order to be able to assess the genotoxic and/or mutagenic potential of waste-water samples using bioassays like Ames test, Comet assay or micronucleus test an enrichment of the water sample via solid-phase extraction is recommended. This is in agreement with previous studies such as the "ToxBox"-Project of the Environmental Agency in Germany.

Current Trends on Role of Biological Treatment in Integrated Treatment Technologies of Textile Wastewater

Wastewater discharge is a matter of concern as it is the primary source of water pollution. Consequently, wastewater treatment plays a key role in reducing the negative impact that wastewater discharge produce into the environment. Particularly, the effluents produced by textile industry are composed of high concentration of hazardous compounds such as dyes, as well as having high levels of chemical and biological oxygen demand, suspended solids, variable pH, and high concentration of salt. Main efforts have been focused on the development of methods consuming less water or reusing it, and also on the development of dyes with a better fixation capacity. However, the problem of how to treat these harmful effluents is still pending. Different treatment technologies have been developed, such as coagulation-flocculation, adsorption, membrane filtration, reverse osmosis, advanced oxidation, and biological processes (activated sludge, anaerobic-aerobic treatment, and membrane bioreactor). Concerning to biological treatments, even though they are considered as the most environmentally friendly and economic methods, their industrial application is still uncertain. On the one hand, this is due to the costs of treatment plants installation and, on the other, to the fact that most of the studies are carried out with simulated or diluted effluents that do not represent what really happens in the industries. Integrated treatment technologies by combining the efficiency two or more methodologies used to be more efficient for the decontamination of textile wastewater, than treatments used separately. The elimination of hazardous compounds had been reported using combination of physical, chemical, and biological processes. On this way, as degradation products can sometimes be even more toxic than the parent compounds, effluent toxicity assessment is an essential feature in the development of these alternatives. This article provides a critical view on the state of art of biological treatment, the degree of advancement and the prospects for their application, also discussing the concept of integrated treatment and the importance of including toxicity assays to reach an integral approach to wastewater treatment.

Facile Synthesis of Tin Dioxide Nanoparticles for Photocatalytic Degradation of Congo Red Dye in Aqueous Solution

This research work reports an approach used to prepare a SnO2 photocatalyst by precipitation and calcination pathways and describes an investigation of the effects of preparation parameters on SnO2 yield. The SnO2 photocatalyst was further used for the photocatalytic degradation of Congo red (CR) dye, and the removal efficiency was optimized using response surface methodology. The results indicate that the SnO2 photocatalyst yield was the highest in 0.05 M of the precursor, stannous chloride and 28 wt % ammonia as the precipitant, pH 10, at 30 °C. The transmission electron microscopy results of the SnO2 photocatalyst illustrate that the average particle size was mainly around 30–50 nm and had a solid spherical shape. The X-ray diffraction results reveal that the prepared sample had a highly crystalline SnO2 rutile crystal structure. The prediction and experimental results of the Response surface methodology (RSM) indicate that, when the reaction time was 97 min, the operating temperature was 47 °C, the photocatalyst dosage was 751 mg/L, and the optimal degradation rate of the CR dye was 100%. After five consecutive photodegradation reactions, the degradation rate remained at 100%. The results demonstrated that the SnO2 photocatalyst prepared in this study possesses excellent reusability.

Enhancement effects of process optimization technique while elucidating the degradation pathways of drugs present in pharmaceutical industry wastewater using Micrococcus yunnanensis

Pharmaceutical effluents released from industries are accountable to deteriorate the aquatic and soil environment through indirect toxic effects. Microbes are adequately been used to biodegrade pharmaceutical industry wastewater and present study was envisaged to determine biodegradation of pharmaceutical effluent by Micrococcus yunnanensis. The strain showed 42.82% COD (Chemical oxygen demand) reduction before optimization. After applying Taguchi's L8 array as an optimization technique, the biodegradation rate was enhanced by 82.95% at optimum conditions (dextrose- 0.15%, peptone 0.1%, inoculum size 4% (wv^-1), rpm 200, pH 8 at 25 °C) within 6 h. The confirmation of pharmaceuticals degradation was done by ¹H NMR (Nuclear magnetic resonance) studies followed by elucidation of transformation pathways of probable drugs in the effluent through Q-Tof-MS (Quadrupole Time of Flight- Mass Spectrometry). The cytotoxicity evaluation of treated and untreated wastewater was analyzed on Human Embryonic Kidney (HEK 293) cells using Alamar Blue assay, which showed significant variance.