An ATP fluorescent chemosensor based on a Zn(II)-complexed dipicolylamine receptor coupled with a naphthalimide chromophore

Experimental and theoretical quantum chemical studies of 2-(2-acetamidophenyl)-2-oxo-N-(pyridin-2-ylmethyl)acetamide and its copper(II) complex: molecular docking simulation of the designed coordinated ligand with insulin-like growth factor-1 receptor (IGF-1R)

Newly synthesized ligand 2-(2- acetamidophenyl)-2-oxo-N-(pyridin-2-ylmethyl)acetamide and its copper(II) complex were characterized by elemental analyses, FT-IR, UV-Vis., ESR, 1H-NMR, and thermal analysis along with the theoretical quantum chemical studies. Combined experimental and theoretical DFT (density functional theory) studies showed the ligand to be a tridentate ligand with three coordinate bonds. The complex was suggested to be in a distorted octahedral structure with dx2-y2 ground state. The activation energy, ΔE*; entropy ΔS*; enthalpy ΔH* and order of reaction has been derived from differential thermogravimetric (DTA) curve, using Horowitz-Metzeger method. The nujol mull electronic spectrum of the ligand and Cu(II) complex have been recorded and the difference of the excited and ground state densities has also been theoretically calculated and plotted to investigate the movement of electrons on excitation. The Cu(II) complex was evaluated for its antibacterial activity against two bacterial species, namely Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Antifungal screening was performed against two species (Condida albicans and Aspergillus flavus). The complex under investigation was found to possess notable biological activity. Molecular docking investigation predicted different types of non-covalent interactions of the synthesized ligand towards Insulin-like growth factor 1 receptor (ID: 5FXR).

Sensitively detecting endogenous homocysteine in human serum and cardiomyocytes with a specific fluorescent probe

The elevated level of homocysteine (Hcy) in circulating blood is generally regarded as a risk factor for a variety of diseases including acute myocardial infarction (AMI), but there is no clear answer to whether circulating Hcy can be used for AMI diagnosis. To address it, here we have designed a tetraazacycle-based fluorescent probe for sensitive detection of endogenous Hcy in AMI patients' serum and cardiomyocytes, showing a perfect selectivity over other biothiols (e.g. Cys and GSH). It mainly relies on the formation of a stable six-membered ring structure when this probe responds to Hcy, which is accompanied by a weakening of photoinduced electron transfer (PET) that induces a sharp increase in the fluorescence emission. In this way, Hcy can be probed in biofluids with high sensitivity. We then employed this fluorescent sensor to statistically analyze the levels of Hcy in human circulating blood, indicating a big difference between AMI patients and the healthy participants. To tell whether such a difference is applicable to AMI diagnosis, we further compare the expression levels of Hcy in cardiomyocytes and other tissue cells. It reveals a lower level of endogenous Hcy in cardiomyocytes, implying no direct relationship between the elevated Hcy and cardiomyocyte damage. This observation suggests that Hcy in circulating blood cannot be utilized as a potential biomarker for AMI diagnosis, although it is proven as a risk factor for this disease.

An overview on the development of different optical sensing platforms for adenosine triphosphate (ATP) recognition

Adenosine triphosphate (ATP), one of the biological anions, plays a crucial role in several biological processes including energy transduction, cellular respiration, enzyme catalysis and signaling. ATP is a bioactive phosphate molecule, recognized as an important extracellular signaling agent. Apart from serving as a universal energy currency for various cellular events, ATP is also considered a factor responsible for numerous physiological activities. It regulates cellular metabolism by breaking phosphoanhydride bonds. Several diseases have been reported widely based on the levels and behavior of ATP. The variation of ATP concentration usually causes a foreseeable impact on mitochondrial physiological function. Mitochondrial dysfunction is responsible for the occurrence of many severe diseases such as angiocardiopathy, malignant tumors and Parkinson's disease. Therefore, there is high demand for developing a sensitive, fast-responsive, nontoxic and versatile detection platform for the detection of ATP. To this end, considerable efforts have been employed by several research groups throughout the world to develop specific and sensitive detection platforms to recognize ATP. Although a repertoire of optical chemosensors (both colorimetric and fluorescent) for ATP has been developed, many of them are not arrayed appropriately. Therefore, in this present review, we focused on the design and sensing strategy of some chemosensors including metal-free, metal-based, sequential sensors, aptamer-based sensors, nanoparticle-based sensors etc. for ATP recognition via diverse binding mechanisms.

A Near InfraRed Emissive Chemosensor for Zn2+ and Phosphate Derivatives Based on a Di-(2-picolyl)amine-styrylflavylium Push-Pull Fluorophore

A new Near InfraRed (NIR) fluorescent chemosensor for metal ions and anions is herein presented. The fluorophore is based on a styrylflavylium dye, a synthetic analogue of the natural anthocyanin family, with a di-(2-picolyl)amine (DPA) moiety as the metal chelating unit. The substitution pattern of the styrylflavylium core (with tertiary amines on positions 7 and 4') shifts the optical properties of the dye towards the NIR region of the electronic spectra, due to a strong push-pull character over the π-conjugated system. The NIR chemosensor is highly sensitive to the presence of Zn²⁺, which induces a strong CHelation Enhanced Fluorescence (CHEF) effect upon binding to the DPA unit (2.7 fold increase). The strongest competing ion is Cu²⁺, with a complete fluorescence quenching, while other metals induce lower responses on the optical properties of the chemosensor. Subsequent anion screening of the Zn²⁺-chemosensor coordination compound has demonstrated a distinct selectivity towards adenosine 5'-triphosphate (ATP) and adenosine 5'-diphosphate (ADP), with high association constants (K ~ 10⁶ M^-1) and a strong CHEF effect (2.4 and 2.9 fold fluorescence increase for ATP and ADP, respectively). Intracellular studies with the Zn²⁺-complexed sensor showed strong luminescence in the cellular membrane of Gram^- bacteria (E. coli) and mitochondrial membrane of mammalian cells (A659), which highlights its possible application for intracellular labelling.

A water-soluble 1, 8-naphthalimide-based fluorescent pH probe for distinguishing tumorous tissues and inflammation mice

A water-soluble fluorescent probe BPN, by introducing a piperazine as the pH-sensitive fluorescence signaling motif to the hydrophilic propionic acid-substituted 1, 8-naphthalimide fluorophore, is highly sensitive to pH changes within cytoplasm matrix in living cells, as well as pH-related diseases models. Owing to the protonation-induced inhibition of the photoinduced electron transfer (PET) from piperazine to naphthalimide fluorophore, BPN displayed a significant fluorescence enhancement (more than 131-fold) upon the pH decreasing from 11.0 to 3.0. The linear rang was between pH 6.4 to 8.0 with a pK_a value of 6.69 near the physiological pH, which was suitable for cytosolic pH research. Furthermore, BPN exhibited a large Stokes shift (142 nm), good water solubility, excellent photostability, high selectivity and low cytotoxicity. All these advantages were particularly beneficial for intracellular pH imaging. Using BPN, we demonstrated the real-time monitoring of cytosolic pH changes in living cells. Most importantly, BPN has not only been successfully applied for distinguishing inflammation mice, but also the surgical specimens of cancer tissue, making it of great potential application in the cancer diagnosis.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Spatiotemporal dynamics of self-assembled structures in enzymatically induced agonistic and antagonistic conditions

Predicting and designing systems with dynamic self-assembly properties in a spatiotemporal fashion is an important research area across disciplines ranging from understanding the fundamental non-equilibrium features of life to the fabrication of next-generation materials with life-like properties. Herein, we demonstrate a spatiotemporal dynamics pattern in the self-assembly behavior of a surfactant from an unorganized assembly, induced by adenosine triphosphate (ATP) and enzymes responsible for the degradation or conversion of ATP. We report the different behavior of two enzymes, alkaline phosphatase (ALP) and hexokinase (HK), towards adenosine triphosphate (ATP)-driven surfactant assembly, which also results in contrasting spatiotemporal dynamic assembly behavior. Here, ALP acts antagonistically, resulting in transient self-assemblies, whereas HK shows agonistic action with the ability to sustain the assemblies. This dynamic assembly behavior was then used to program the time-dependent emergence of a self-assembled structure in a two-dimensional space by maintaining concentration gradients of the enzymes and surfactant at different locations, demonstrating a new route for obtaining 'spatial' organizational adaptability in a self-organized system of interacting components for the incorporation of programmed functionality.

Selective sensing of adenosine monophosphate (AMP) over adenosine diphosphate (ADP), adenosine triphosphate (ATP), and inorganic phosphates with zinc(II)-dipicolylamine-containing gold nanoparticles

Mixed monolayer-protected gold nanoparticles containing surface-bound triethylene glycol and dipicolylamine groups aggregated in water/methanol, 1 : 2 (v/v) in the presence of nucleotides, if the solution also contained zinc(ii) nitrate to convert the dipicolylamine units into the corresponding zinc complexes. Nanoparticle aggregation could be followed with the naked eye by the colour change of the solution from red to purple followed by nanoparticle precipitation. The sensitivity was highest for adenosine triphosphate (ATP), which could be detected at concentrations >10 μM, and decreased over adenosine diphosphate (ADP) to adenosine monophosphate (AMP), consistent with the typically higher affinity of zinc(ii)-dipicolylamine-derived receptors for higher charged nucleotides. Inorganic sodium diphosphate and triphosphate interfered in the assay by also inducing nanoparticle aggregation. However, while the nucleotide-induced aggregates persisted even at higher analyte concentrations, the nanoparticles that were precipitated with inorganic salts redissolved again when the salt concentration was increased. The thus resulting solutions retained their ability to respond to nucleotides, but they now preferentially responded to AMP. Accordingly, AMP could be sensed selectively at concentrations ≥50 μM in an aqueous environment, even in the presence of other nucleotides and inorganic anions. This work thus introduces a novel approach for the sensing of a nucleotide that is often the most difficult analyte to detect with other assays.

A colorimetric sensor array for the classification of biologically relevant tri-, di- and mono-phosphates

A cyclic tetrapeptide paired with six commercially available indicators provides a chemosensing array able to classify biological phosphate derivatives.

Turn-on detection of assorted phosphates by luminescent chemosensors

This review illustrates a variety of luminescent chemosensors for the selective detection of assorted phosphates via the “Turn-On” emission mechanism with focus on their design aspects, chemical structures and sensing mechanism.

Mechanistic Insight of Sensing Hydrogen Phosphate in Aqueous Medium by Using Lanthanide(III)-Based Luminescent Probes

The development of synthetic lanthanide luminescent probes for selective sensing or binding anions in aqueous medium requires an understanding of how these anions interact with synthetic lanthanide probes. Synthetic lanthanide probes designed to differentiate anions in aqueous medium could underpin exciting new sensing tools for biomedical research and drug discovery. In this direction, we present three mononuclear lanthanide-based complexes, EuLCl₃ (1), SmLCl₃ (2), and TbLCl₃ (3), incorporating a hexadentate aminomethylpiperidine-based nitrogen-rich heterocyclic ligand L for sensing anion and establishing mechanistic insight on their binding activities in aqueous medium. All these complexes are meticulously studied for their preferential selectivities towards different anions such as HPO₄²⁻, SO₄²⁻, CH₃COO⁻, I⁻, Br⁻, Cl⁻, F⁻, NO₃⁻, CO₃²⁻/HCO₃⁻, and HSO₄⁻ at pH 7.4 in aqueous HEPES (2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid) buffer. Among the anions scanned, HPO₄²⁻ showed an excellent luminescence change with all three complexes. Job’s plot and ESI-MS support the 1:2 association between the receptors and HPO₄²⁻. Systematic spectrophotometric titrations of 1–3 against HPO₄²⁻ demonstrates that the emission intensities of 1 and 2 were enhanced slightly upon the addition of HPO₄²⁻ in the range 0.01–1 equiv and 0.01–2 equiv., respectively. Among the three complexes, complex 3 showed a steady quenching of luminescence throughout the titration of hydrogen phosphate. The lower and higher detection limits of HPO₄²⁻ by complexes 1 and 2 were determined as 0.1–4 mM and 0.4–3.2 mM, respectively, while complex 3 covered 0.2–100 μM. This concludes that all complexes demonstrated a high degree of sensitivity and selectivity towards HPO₄²⁻.

An ATP responsive fluorescent supramolecular assembly based on a polyelectrolyte and an AIE active tetraphenylethylene derivative

Aggregation induced emission (AIE) active probes have attracted enormous attention due to their wide-spread and ever increasing number of applications in the sensing of chemically and biologically important molecules. AIE probes undergo drastic modulation in their photophysical features from a monomeric to aggregated state. In the current work, we report the aggregation of tetra-anionic Su-TPE (AIE active probe) in the presence of a cationic polyelectrolyte, poly(allylaminehydrochloride) (PAH). A supramolecular assembly is formed by the electrostatic interaction between cationic PAH and anionic Su-TPE molecules, which leads to drastic modulations in the spectral features of anionic Su-TPE upon addition of cationic PAH. The Su-TPE-PAH aggregate assembly has been investigated using various photophysical techniques, such as, ground-state absorption, steady-state and time-resolved emission spectroscopic techniques along with 1H NMR measurements. The Su-TPE-PAH aggregate assembly is found to be responsive towards the ionic strength of the medium and temperature which results in drastic modulations of the spectral features of the emissive supramolecular aggregate assembly. Finally, the specific recognition of an important bioanalyte, ATP, has been achieved using the formed Su-TPE-PAH supramolecular aggregate assembly as a sensing platform which displays good selectivity and high sensitivity towards ATP. Importantly, the developed sensor platform could also function in the human serum matrix, hence, demonstrating the potential of the established sensor platform for real-life applications in near future.

An ICT-based fluorescence enhancement probe for detection of Sn2+ in cancer cells

Development of a novel fluorescence enhancement probe for detection of Sn²⁺ in organisms, with high selectivity and sensitivity, is of great interest but remains a great challenge. Herein, an ICT-based fluorescence probe TPPB was rationally developed to act as an ‘enhancement’ luminescent and “naked-eye” indicator for Sn²⁺ detection. Importantly, spectroscopic studies indicated that TPPB was a fluorescence enhancement sensor for Sn²⁺ with rapid response, low detection limit (0.116 μM) and excellent binding constant (1.6 × 10⁴ M⁻¹). The mechanism of TPPB response to Sn²⁺ was further proved by ¹H NMR titration, and enhancement calculations. Furthermore, TPPB is applied as a fluorescence probe for imaging in Hela cells, indicated that it can be potentially applied for Sn²⁺ sensing in biological fields.

Development of a novel fluorescence enhancement probe for detection of Sn²⁺ in organisms, with high selectivity and sensitivity, is of great interest but remains a great challenge.

Selective Coordination of Cu2+ and Subsequent Anion Detection Based on a Naphthalimide-Triazine-(DPA)2 Chemosensor

A new fluorescent chemosensor for copper (II) and subsequent anion sensing was designed and fully characterized. The sensor consisted of a 1,8-naphthalimide core, bearing two terminal dipicolylamine (DPA) receptor units for binding metal cations, and an ethoxyethanol moiety for enhanced water solubility. The DPA units are connected to position 4 of the fluorophore via a triazine-ethylenediamine spacer. Fluorescence titration studies of the chemosensor revealed a high selectivity for Cu²⁺ over other divalent ions, the emissions were strongly quenched upon binding, and a stability constant of 5.52 log units was obtained. Given the distance from DPA chelating units and the fluorophore, quenching from the Cu²⁺ complexation suggests an electron transfer or an electronic energy transfer mechanism. Furthermore, the Cu²⁺-sensor complex proved to be capable of sensing anionic phosphate derivatives through the displacement of the Cu²⁺ cation, which translated into a full recovery of the luminescence from the naphthalimide. Super-resolution fluorescence microscopy studies performed in HeLa cells showed there was a high intracellular uptake of the chemosensor. Incubation in Cu²⁺ spiked media revealed a strong fluorescent signal from mitochondria and cell membranes, which is consistent with a high concentration of ATP at these intracellular sites.

Fluorescent, colourimetric, and ratiometric probes based on diverse fluorophore motifs for mercuric(II) ion (Hg2+) sensing: highlights from 2011 to 2019

Though it has not been shown to deliver any biological importance, mercuric(II) ion (Hg²⁺) is a deleterious cation which poses grievous effects to the human body and/or the ecosystem, hence, the need for its sensitive and selective monitoring in both environmental and biological systems. Over the years, there has been a great deal of work in the use of fluorescent, colourimetric, and/or ratiometric probes for Hg²⁺ recognition. Essentially, the purpose of this review article is to give an overview of the advances made in the constructions of such probes based on the works reported in the period from 2011 to 2019. Discussion in this review work has been tailored to the kinds of fluorophore scaffolds used for the constructions of the probes reported. Selected examples of probes under each fluorophore subcategory were discussed with mentions of the typically determined parameters in an analytical sensing operation, including modulation in fluorescence intensity, optimal pH, detection limit, and association constant. The environmental and biological application ends of the probes were also touched where necessary. Important generalisations and conclusions were given at the end of the review. This review article highlights 196 references.

A coumarin-based turn-on chemosensor for selective detection of Zn(II) and application in live cell imaging

A 2-oxo-2H-chromene-3-carbohydrazide (CHB) was synthesized by the reaction of salicylaldehyde with diethyl malonate and hydrazine hydrate. The recognition behaviors of CHB to Zn²⁺ were investigated and the results showed that CHB exhibits well selectivity and sensitivity to Zn²⁺ with fast response in PBS (pH = 7.24, 60% DMF), the co-existed cations and anions could not interfere the recognition between CHB and Zn²⁺. Besides, the detection limit of CHB for Zn²⁺ was calculated to be 0.95 μM. Furthermore, DFT, EI-MS data and Job's plot were applied for determining the sensing mechanism of CHB with Zn²⁺ and the results showed that a type of 2:1 complex was formed between CHB and Zn²⁺ with the binding constant was 1.32 × 10⁴ M^-2. At last, probe CHB was successfully applied for the imaging of Zn²⁺ in living cells.

Engineering a Reversible Fluorescent Probe for Real-Time Live-Cell Imaging and Quantification of Mitochondrial ATP

Real-time imaging and quantification of adenosine triphosphate (ATP) fluctuation in cells are significant for understanding the relationship between energy metabolism and cell functions. However, few synthetic fluorescent probes have been reported to tackle this challenge due to lack of accurate fluorescence readout and suitable response concentration. Herein we designed and synthesized a ratiometric fluorescent probe (Rh6G-ACFPN) for quantitatively detecting the fluctuation of mitochondrial ATP in living cells. Rh6G-ACFPN selectively and reversibly responds to ATP with an ideal dissociation constant (K_d) of 4.65 mM (3-10 mM: the range of mitochondrial ATP concentrations). Live-cell imaging allows us to directly monitor the dynamic changes of mitochondrial ATP in high temporal resolution. Moreover, for the first time, mitochondrial ATP in normal and cancer cells lines was successfully quantified and discriminated. These results demonstrate the versatility of Rh6G-ACFPN as a useful imaging tool to elucidate the function of mitochondrial ATP in living cells.

Selective sensing of ATP by hydroxide-bridged dizinc(ii) complexes offering a hydrogen bonding cavity

This work illustrates the highly selective fluorescence detection of ATP in the presence of other competing anions, such as AMP, ADP, PPi and other phosphates by using a set of hydroxide-bridged dizinc(ii) complexes offering a cavity lined with hydrogen bonds and other interactive forces. ATP, as a whole, was recognized by the synergic combination of Zn-phosphate bonding, ππ stacking between the adenine ring of ATP and the pyridine ring of the dizinc complex and hydrogen bonding interactions that modulate the cavity structure of the dizinc complexes.

Developing a Drug Screening Platform: MALDI-Mass Spectrometry Imaging of Paper-Based Cultures

Many potential chemotherapeutics fail to reach patients. One of the key reasons is that compounds are tested during the drug discovery stage in two-dimensional (2D) cell cultures, which are often unable to accurately model in vivo outcomes. Three-dimensional (3D) in vitro tumor models are more predictive of chemotherapeutic effectiveness than 2D cultures, and thus, their implementation during the drug screening stage has the potential to more accurately evaluate compounds earlier, saving both time and money. Paper-based cultures (PBCs) are an emerging 3D culture platform in which cells suspended in Matrigel are seeded into paper scaffolds and cultured to generate a tissue-like environment. In this study, we demonstrate the potential of matrix-assisted laser desorption/ionization-mass spectrometry imaging with PBCs (MALDI-MSI-PBC) as a drug screening platform. This method discriminated regions of the PBCs with and without cells and/or drugs, indicating that coupling PBCs with MALDI-MSI has the potential to develop rapid, large-scale, and parallel mass spectrometric drug screens.

Monitoring ADP and ATP in vivo using a fluorescent Ga(iii)-probe complex

A naphthol-based sensor (L) was designed and synthesized for the specific recognition of Ga3+ using fluorescence enhancement. An in situ generated L-Ga3+ ensemble detected ADP and ATP more selectively through a fluorescence "switch off" response, which was confirmed both in cells and in adult zebrafish.

A novel platform self-assembled from squaraine-embedded Zn(ii) complexes for selective monitoring of ATP and its level fluctuation in mitotic cells

Using multiple interactions, a simple self-assembly based on a Zn(ii) coordination compound and squaraine () demonstrated a selective turn-on fluorescence response to ATP in the near infrared (NIR) region. More importantly, the self-assembly has been successfully applied to ATP imaging in the mitochondria of the gastric cancer cell line SGC-7901 and monitoring of level fluctuation of ATP during the mitotic period.

An uracil-linked hydroxyflavone probe for the recognition of ATP

Background: Nucleotides are essential molecules in living systems due to their paramount importance in various physiological processes. In the past years, numerous attempts were made to selectively recognize and detect these analytes, especially ATP using small-molecule fluorescent chemosensors. Despite the various solutions, the selective detection of ATP is still challenging due to the structural similarity of various nucleotides. In this paper, we report the conjugation of a uracil nucleobase to the known 4'-dimethylamino-hydroxyflavone fluorophore. Results: The complexation of this scaffold with ATP is already known. The complex is held together by stacking and electrostatic interactions. To achieve multi-point recognition, we designed the uracil-appended version of this probe to include complementary base-pairing interactions. The theoretical calculations revealed the availability of multiple complex structures. The synthesis was performed using click chemistry and the nucleotide recognition properties of the probe were evaluated using fluorescence spectroscopy. Conclusions: The first, uracil-containing fluorescent ATP probe based on a hydroxyflavone fluorophore was synthesized and evaluated. A selective complexation with ATP was observed and a ratiometric response in the excitation spectrum.

A continuous luminescence assay for monitoring kinase activity: signalling the ADP/ATP ratio using a discrete europium complex

We report the application of a stable cationic europium complex [Eu.1]+ in a continuous-read luminescence assay for kinase activity. [Eu.1]+ binds reversibly to ATP and ADP in water, at neutral pH, in the presence of Mg²⁺ ions, providing distinctive luminescence responses that permits the kinase-catalysed conversion of ATP to ADP to be monitored in real-time.

A new conjugated polymer-based combination probe for ATP detection using a multisite-binding and FRET strategy

A new conjugated polymer-based ratiometric combination probe was constructed for adenosine triphosphate detection by taking advantage of a multisite-binding and fluorescence resonance energy transfer strategy. The method is rapid and highly selective, which can clearly discriminate ATP from persistent interferents such as ADP, AMP, other nucleoside polyphosphates and nucleobases.

A new water-soluble polythiophene derivative as a probe for real-time monitoring adenosine 5'-triphosphatase activity in lysosome of living cells

Detection of the adenosine 5'-triphosphatase (ATPase) activity in lysosome of living cells is of great importance for clinical diagnosis of many related diseases, including cancer. In this work, a new water-soluble polythiophene derivative named ZnPT bearing both quaternary ammonium salt groups and dipicolylamine-Zn²⁺ (DPA-Zn²⁺) complexes in its side chain, was designed and synthesized for this propose. The probe mainly localized to lysosome with good biocompatibility and membrane penetration. The real-time, continuous, direct, and label-free assays were achieved through a fluorescence "turn-on" mode by taking advantages of the reaction specificity of ATPase with ATP and the high binding selectivity of ZnPT toward ATP substrate over its hydrolysis product (ADP). This well designed strategy should provide a facile and effective way for investigating ATPase-relevant biological processes.

A novel glucosamine-linked fluorescent chemosensor for the detection of pyrophosphate in an aqueous medium and live cells

A glucosamine-linked Cu²⁺ ensemble has been successfully developed for detection of pyrophosphate (PPi) in aqueous medium and in live MD-AMB-231 cells.

Rhodamine-based sensor for real-time imaging of mitochondrial ATP in living fibroblasts

Mitochondria are essential for the production and maintenance of ATP in the eukaryotic cell. To image and monitor intracellular ATP level without cell breakage, biological and chemical sensors were developed in the last years. Here, we have internalized a rhodamine-based sensor RSL⁺ into living cells and monitored the mitochondrial ATP levels in cultured mouse embryonic fibroblasts. To evaluate the robustness of the sensor we imaged the changes of the mitochondrial ATP levels under non-physiological conditions upon incubation with FCCP, oligomycin, azide, deoxyglucose or phosphoenolpyruvate; all compounds that interfere with ATP homeostasis of the cell. The ATP sensor allowed us to determine the mitochondrial ATP levels in human skin fibroblasts where we observe a similar amount of ATP compared to mouse embryonic fibroblasts. We propose the RSL⁺ to be a valuable tool for the assessment of mitochondrial dysfunction in human cells derived from mitochondrial OXPHOS patients and for basic studies on bioenergetics metabolism.

•

The rhodamine-based sensor RSL⁺ permeates efficiently eukaryotic plasma membrane and accumulates in mitochondria.

•

RSL⁺ detects mitochondrial ATP levels in human and mouse skin fibroblasts.

•

RSL⁺ detects real-time variations of mitochondrial ATP levels under non-physiological conditions.

A Toolbox of Chromones and Quinolones for Measuring a Wide Range of ATP Concentrations

A series of 26 3-hydroxychromones, three bis-flavonols and four 3-hydroxyquinolones were studied to evaluate their fluorescence response to interaction with ATP in buffer. The dyes differ by the total charge, the size and number of their aromatic units, as well as the position or electron-donating ability of their substituents. All of them were suggested to form complexes with ATP of 1:1 and 1:2 stoichiometry, which can be evidenced by their bright fluorescence and their 3000-6000 cm^-1 red-shifted excitation band. These fluorescent complexes allow detection of ATP concentrations over 3 orders of magnitude, whereas most other known probes cover no more than two orders. In total, the dyes allow ATP detection from 0.001 to 57 mm. In addition, most of the dye-ATP complexes can be excited in the visible and monitored in the red region of the spectrum. The response amplitude of the described dyes to ATP is as high as for the best known probes. Considering that complexation takes place at neutral pH, the studied dyes form a toolbox of fluorescent probes for intensiometric and ratiometric measurements of ATP concentration in a broad concentration range. Finally, the obtained results stimulate the idea that most of natural 3-hydroxyflavones in living cells may form complexes with ATP.

Real-Time Monitoring ATP in Mitochondrion of Living Cells: A Specific Fluorescent Probe for ATP by Dual Recognition Sites

Adenosine triphosphate (ATP) is mainly produced in the mitochondrion and used as a universal energy source for various cellular events. Various fluorescent probes for ATP have been established successfully, but most of them are not appropriate for monitoring the fluctuation of the mitochondrial ATP level. Herein, a fluorescent probe named Mito-Rh is first synthesized and used to recognize ATP in mitochondrion. In the probe, rhodamine, diethylenetriamine, and triphenylphosphonium are selected as fluorophore, reaction site, and mitochondrion-targeting group, respectively. Probe Mito-Rh shows high sensitivity to ATP with 81-fold fluorescence enhancement, and the detection range (0.1-10 mM) can match the concentration level of ATP in the mitochondrion. Moreover, Mito-Rh provides excellent selectivity toward ATP over other biological anions (ADP, AMP, GTP, CTP, UTP) owing to a concurrent effect of dual recognition sites (hydrogen bond and π-π stacking). In particular, the probe can localize in mitochondrion specifically and demonstrates utility in the real-time detection of mitochondrial ATP concentration changes.

Aggregation-induced emission (AIE)-active fluorescent probes with multiple binding sites toward ATP sensing and live cell imaging

Herein, we report a set of novel AIE-active fluorescent probes containing pyridiniums and boric acid groups with the applications of ATP recognition and specific tracking of different cell organelles.

Aggregation-Induced Energy Transfer of Conjugated Polymer Materials for ATP Sensing

Water-soluble conjugated polymers are attractive fluorescent materials for applications in chemical and biological sensing. The molecular wire effect of such polymers amplifies changes in the fluorescence signal, which can be used for detecting various analytes with high sensitivity. In this work, we report an efficient ratiometric fluorescent probe based on a water-soluble conjugated polymer that showed high sensitivity and selectivity toward adenosine 5'-triphosphate (ATP). The macromolecular probe consisted of a polyfluorene backbone doped with 5 mol % 1,4-dithienylbenzothiadiazole (DBT) modified by bis-imidazolium and oligo(ethylene glycol) moieties. Solutions of the polymer emitted purple fluorescence, which changed to red upon addition of ATP molecules. The addition of ATP caused the polymer to aggregate, which enhanced fluorescence resonance energy transfer efficiency from the fluorene segments to DBT units, leading to an increase in red emission. The ratio of the fluorescence at these different wavelengths (I₆₅₅/I₄₂₃) showed a strong dependence on the ATP concentration. PF-DBT-BIMEG also exhibited high selectivity for ATP sensing over other representative anions and discriminated it from adenosine 5'-diphosphate (ADP) and adenosine 5'-monophosphate (AMP). This can be explained by the much stronger electrostatic interactions between the polymer and ATP than the interactions between the polymer and ADP or AMP, as confirmed through molecular dynamics simulations.

Detection and quantification of ATP in human blood serum

Two fluorometric sensors based on the tri-serine tri-lactone scaffold and thiourea or sulfonamide moieties serving as hydrogen bond donors allowing for anion binding are described. The sensor utilizing thiourea as a recognition moiety shows fluorescence enhancement while the sensor with sulfonamide shows quenching upon addition of phosphates. Sensor arrays composed of two sensors are able to discriminate structurally similar organic phosphates in the presence of interferents in human blood serum. The quantitative analysis of ATP in human blood serum shows high accuracy (the root mean square error of prediction, 1.65%) without requiring any sample pretreatment.

Understanding Stacking Interactions between an Aromatic Ring and Nucleobases in Aqueous Solution: Experimental and Theoretical Study

Stacking interactions between aromatic compounds and nucleobases are crucial in recognition of nucleotides and nucleic acids, but a comprehensive understanding of the strength and selectivity of these interactions in aqueous solution has been elusive. To this end, model complexes have been designed and analyzed by experiment and theory. For the first time, stacking free energies between five nucleobases and anthracene were determined experimentally from thermodynamic double mutant cycles. Three different experimental methods were proposed and evaluated. The dye prefers to bind nucleobases in the order (kcal/mol): G (1.3) > T (0.9) > U (0.8) > C (0.5) > A (0.3). The respective trend of interaction free energies extracted from DFT calculations correlates to that obtained experimentally. Analysis of the data suggests that stacking interactions dominate over hydrophobic effects in an aqueous solution and can be predicted with DFT calculations.

Dipicolylamine coupled rhodamine dyes: new clefts for highly selective naked eye sensing of Cu2+and CN−ions

The dipicolylamine (DPA) motif has been utilized in devising rhodamine labeled compounds1and2for Cu²⁺ions.