N-doped CoO-anchored ultrafine Pt nanoparticles for acidic hydrogen evolution reaction

An efficient hydrogen evolution reaction catalyst of ultrafine Pt nanoparticles loaded onto N-doped CoO was synthesized. This catalyst displayed high electrocatalytic activity and stability. The outstanding performance is attributed to the interactions between the active sites and support, as well as the regulation of the electronic structure through covalent nitrogen bridging.

Role of Morphology on Zinc Oxide Nanostructures for Efficient Photoelectrochemical Activity and Hydrogen Production

Energy generation today heavily relies on the field of photocatalysis, with many conventional energy generation strategies now superseded by the conversion of solar energy into chemical or thermal energy for a variety of energy-related applications. Global warming has pointed to the urgent necessity of moving away from non-renewable energy sources, with a resulting emphasis on creating the best photocatalysts for effective solar conversion by investigating a variety of material systems and material combinations. The present study explores the influence of morphological changes on the photoelectrochemical activity of zinc oxide nanostructures by exploiting electrodeposition and capping agents to control the growth rates of different ZnO facets and obtain well-defined nanostructures and orientations. A zinc nitrate (Zn (NO3)2) bath was used to electrodeposit ZnO nanostructures on an indium tin oxide glass (ITO) substrate at 70 °C with an applied potential of -1.0 V. Ethylenediamine (EDA) or ammonium fluoride (NH4F) were added as capping agents to the zinc nitrate bath. Extensive evaluation and characterization of the photoelectrochemical (PEC) capabilities of the resulting morphology-controlled zinc oxide nanostructures confirmed that altering the ZnO morphology can have positive impacts on PEC properties.

Sustainable ZIF-67/Mo-MXene-Derived Nanoarchitecture Synthesis: An Enhanced Durable Performance of Lithium-Selenium Batteries

Selenium-based electrodes have garnered attention for their high electrical conductivity, compatibility with carbonate electrolytes, and volumetric capacity comparable to sulfur electrodes. However, real-time application is hindered by rapid capacity deterioration from the "shuttle effect" of polyselenides and volume fluctuations. To address these challenges, a hybrid Se@ZIF-67/Mo-MXene-derived (Se@Co-NC/Mo2C) nanoarchitecture is developed via an economically viable in situ electrostatic self-assembly of ZIF-67 and Mo2C nanosheets. The catalytic effects and porous framework of Co-NC/Mo2C enhance electrode attributes, promoting superior adsorption and conversion of lithium polyselenides and facile ion/electron transport within the electrode, resulting in stable electrochemical performance. Lithium-selenium batteries (LSeBs) exhibit remarkable characteristics, boasting high specific capacity and exceptional durability. The Se@Co-NC/Mo2C electrode delivers a reversible capacity of 503.5 mAh g-1 at 0.5 C with 98% capacity retention, 100% Coulombic efficiency, and exceptional cyclic durability through 8600 cycles. In sustainability tests at 10C/1C charging/discharging, the Se@Co-NC/Mo2C electrode demonstrates an optimistic and stable capacity of ≈370.6 mAh g-1 with 93% capacity retention at the 3100th cycle in a carbonate-based electrolyte and ≈181.3 mAh g-1 with 92% capacity retention after 5000 cycles in an ether-based electrolyte, indicating exceptional stability for practical rechargeable batteries. This cost-effective and efficient approach holds significant potential for high-performance and durable LSeBs.

Room Temperature Ion Beam Synthesis of Ultra-Fine Molybdenum Carbide Nanoparticles: Toward a Scalable Fabrication Route for Earth-Abundant Electrodes

Molybdenum carbides are promising low-cost electrocatalysts for electrolyzers, fuel cells, and batteries. However, synthesis of ultrafine, phase-pure carbide nanoparticles (diameter < 5 nm) with large surface areas remains challenging due to uncontrollable agglomeration that occurs during traditional high temperature syntheses. This work presents a scalable, physical approach to synthesize molybdenum carbide nanoparticles at room temperature by ion implantation. By tuning the implantation conditions, various molybdenum carbide phases, stoichiometries, and nanoparticle sizes can be accessed. For instance, molybdenum ion implantation into glassy carbon at 30 keV energy and to a fluence of 9 × 1016 at cm-2 yields a surface η-Mo3C2 with a particle diameter of (10 ± 1) nm. Molybdenum implantation into glassy carbon at 60 keV to a fluence of 6 × 1016 at cm-2 yields a buried layer of ultrafine γ'-MoC/η-MoC nanoparticles. Carbon ion implantation at 20 keV into a molybdenum thin film produces a 40 nm thick layer primarily composed of β-Mo2C. The formation of nanoparticles in each molybdenum carbide phase is explained based on the Mo-C phase diagram and Monte-Carlo simulations of ion-solid interactions invoking the thermal spike model. The approaches presented are widely applicable for synthesis of other transition metal carbide nanoparticles as well.

AuAgCu trimetallic nanoparticles based alloy: an advanced electrocatalyst for hydrogen evolution reaction in alkaline media

Hydrogen production via cost-effective electrochemical water splitting is one of the most promising approaches to confront the energy crisis and to obtain clean fuels with high energy density. To address this concern, herein, we developed a simple one-step synthesis method for creating an AuAgCu trimetallic alloy using aspirin as a capping agent. This alloy shows potential for efficient electrocatalyst for hydrogen evolution reaction. The trimetallic nanoparticles based alloy exhibit an equiaxed grain-like morphology and a face-centred cubic phase. In HER experiments using a 1 M KOH electrolyte, the AuAgCu alloy shows nearly negligible overpotential compared to mono- and bimetallic catalysts, and the Tafel slope was 32.7 mV dec-1, which is the lowest ever achieved for alloy-based electrocatalysts and extremely close to a commercially available Pt/C with high stability for 21 days and no decrease in current density in alkaline media. Besides, with excellent HER activity and stability, the trimetallic AuAgCu-modified electrode possessed significant durability for over 1000 cycles in the selected range of potential from 0.5 to 0.8 V at different scan rates from 1 to 100 mV s-1. This simple, cost-effective and environmentally friendly methodology can pave the way for the exploitation of mixed metal alloy-based electrocatalysts not only for water splitting but also for other applications, such as fuel cells, lithium-ion batteries and supercapacitors.

Recent Advancements in Ascribing Several Platinum Free Electrocatalysts Pertinent to Hydrogen Evolution from Water Reduction

The advancement of a sustainable and scalable catalyst for hydrogen production is crucial for the future of the hydrogen economy. Electrochemical water splitting stands out as a promising pathway for sustainable hydrogen production. However, the development of Pt-free electrocatalysts that match the energy efficiency of Pt while remaining economical poses a significant challenge. This review addresses this challenge by highlighting latest breakthroughs in Pt-free catalysts for the hydrogen evolution reaction (HER). Specifically, we delve into the catalytic performance of various transition metal phosphides, metal carbides, metal sulphides, and metal nitrides toward HER. Our discussion emphasizes strategies for enhancing catalytic performance and explores the relationship between structural composition and the performance of different electrocatalysts. Through this comprehensive review, we aim to provide insights into the ongoing efforts to overcome barriers to scalable hydrogen production and pave the way for a sustainable hydrogen economy.

Restructuring and Hydrogen Evolution on Sub-Nanosized PdxBy Clusters

As a Pt-group element, Pd has been regarded as one of the alternatives to Pt-based catalysts for the hydrogen evolution reaction (HER). Herein, we performed density functional theory (DFT) computations to explore the most stable structures of PdxBy (x = 6, 19, 44), revealed the in situ structural reconstruction of these clusters under acidic conditions, and evaluated their HER activity. We found that the presence of B can prevent underpotential hydrogen adsorption and activate the H atoms on the cluster surface for the HER. The theoretical calculations show that the reaction barrier for the HER on ~1 nm sized Pd44B4 can be as low as 0.36 eV, which is even lower than for the same-sized Pt and Pd2B nanoparticles. The ultra-high HER activity of sub-nanosized PdxBy clusters makes them a potential new and efficient HER electro-catalyst. This study provides new ideas for evaluating and designing novel nanocatalysts based on the structural reconstruction of small-sized nanoparticles in the future.

Research progress on metal-organic framework compounds (MOFs) in electrocatalysis

Metal-organic frameworks (MOFs) have favorable characteristics such as large specific surface area, high porosity, structural diversity, and pore surface modification, giving them great potential for development and attractive prospects in the research area of modern materials electrocatalysis. However, unsatisfactory catalytic activity and poor electronic conductivity are the main challenges facing MOFs. This review focuses on MOF-based materials used in electrocatalysis, based on the types of catalytic reactions that have used MOF-based materials in recent years along with their applications, and also looks at some new electrocatalytic materials and their future development prospects.

Electronic-Structure-Modulated Cu,Co-Coanchored N-Doped Nanocarbon as a Difunctional Electrocatalyst for Hydrogen Evolution and Oxygen Reduction Reactions

To alleviate the problems of environmental pollution and energy crisis, aggressive development of clean and alternative energy technologies, in particular, water splitting, metal-air batteries, and fuel cells involving two key half reactions comprising hydrogen evolution reaction (HER) and oxygen reduction (ORR), is crucial. In this work, an innovative hybrid comprising heterogeneous Cu/Co bimetallic nanoparticles homogeneously dispersed on a nitrogen-doped carbon layer (Cu/Co/NC) was constructed as a bifunctional electrocatalyst toward HER and ORR via a hydrothermal reaction along with post-solid-phase sintering technique. Thanks to the interfacial coupling and electronic synergism between the Cu and Co bimetallic nanoparticles, the Cu/Co/NC catalyst showed improved catalytic ORR activity with a half-wave potential of 0.865 V and an excellent stability of more than 30 h, even compared to 20 wt% Pt/C. The Cu/Co/NC catalyst also exhibited excellent HER catalytic performance with an overpotential of below 149 mV at 10 mA/cm2 and long-term operation for over 30 h.

Adsorption and dissociation of hydrogen molecules over S-vacancies in a Nb-doped MoS2monolayer

Motivated by the recent interest in the hydrogen energy, we have carried out a complete study of the catalytic activity of a defective molybdenum disulfide monolayer (MoS2) by means of density functional theory (DFT) calculations. The MoS2monolayer is characterized by a nonreactive basal plane. In principle, its catalytic activity is concentrated at the edges, but an alternative way to increase such activity is obtained by creating active sites where the molecules can dissociate. These defects can be easily produced experimentally by different techniques. In our study, we have performed an atomic, energetic and electronic analysis of a hydrogen molecule adsorbed on a MoS2monolayer. In a first step, we have found that the H2molecule remains physisorbed over both doped-free and Nb-doped MoS2monolayers, showing that the Nb atom does not increase the poor reactivity of the clean MoS2layer. Interestingly, our energetic results suggest that the vacancies will prefer to be formed close to the Nb atoms in the doped monolayer, but the small energy difference would allow the formation in non-doped like sites. Theoretically, we found out the conditions for the molecular dissociation on a S vacancy. In both cases, with and without Nb, the molecule should rotate from the original perpendicular position to an almost parallel orientation jumping an energetic barrier. After that, the atoms are separated binding to the Mo atoms around the missing S atom. Ourab initiomolecular dynamics simulations show that for low pressure conditions (using one single molecule in the system) the H2prefers to desorb from the vacancy, while for larger pressures (when additional H2molecules are added to the system) the molecule is finally dissociated on the vacancy. Our long simulations confirm the great stability of the structure with the two H atoms binding to the Mo atoms close to the vacancy. Finally, the inclusion of a third (or a fourth) H atom in the vacancy leads to the formation and desorption of a H2molecule, leaving one (or two) atoms in the vacancy.

Nanostructured Niobium and Titanium Carbonitrides as Electrocatalyst Supports

Nanostructured niobium-titanium carbonitrides, (Nb,Ti)C1-xNx, with the cubic-rock salt structure are prepared without the use of reactive gases via thermal treatment (700-1200 °C) under nitrogen of mixtures of guanidine carbonate and ammonium niobate (V) oxalate hydrate, with addition of ammonium titanyl oxalate monohydrate as a titanium source. The bulk structure and chemical composition of the materials are characterized using powder X-ray diffraction (XRD) and powder neutron diffraction, elemental homogeneity is studied using energy dispersive spectroscopy (EDS) mapping using transmission electron microscopy (TEM), and surface chemical analysis is examined using X-ray photoelectron spectroscopy (XPS). Nanoscale crystallites of between 10 and 50 nm are observed by TEM, where EDS reveals the homogeneity of metal distribution for the mixed-metal materials. Titanium carbonitrides are found to be air sensitive, reacting with air under ambient conditions, while titanium-niobium carbonitrides are found to degrade in aqueous sulfuric acid. The niobium carbonitrides, however, show some stability toward acidic solutions. Materials are produced with composition NbC1-xNx with x between 0.35 and 0.45, and more carbon-rich materials (x ≈ 0.35) are found as the synthesis temperature is increased, as proven by Rietveld refinement of crystal structure against powder neutron diffraction data. Despite phase purity seen by diffraction and negligible bulk carbon content, XPS shows a complex surface chemistry for the NbC1-xNx materials, with evidence for Nb2O5-like oxide species in a carbon-rich environment. The NbC1-xNx prepared at 900 °C has a surface area around 50 m2 g-1, making it suitable as a catalyst support. Loading with iridium provides a material active for the oxygen evolution reaction in 0.1 M sulfuric acid, with minimal leaching of either Nb or Ir after 1000 cycles.

Mo2C-Based Ceramic Electrode with High Stability and Catalytic Activity for Hydrogen Evolution Reaction at High Current Density

Developing robust electrodes with high catalytic performance is a key step for expanding practical HER (hydrogen evolution reaction) applications. This paper reports on novel porous Mo2C-based ceramics with oriented finger-like holes directly used as self-supported HER electrodes. Due to the suitable MoO3 sintering additive, high-strength (55 ± 6 MPa) ceramic substrates and a highly active catalytic layer are produced in one step. The in situ reaction between MoO3 and Mo2C enabled the introduction of O in the Mo2C crystal lattice and the formation of Mo2C(O)/MoO2 heterostructures. The optimal Mo2C-based electrode displayed an overpotential of 333 and 212 mV at 70 °C under a high current intensity of 1500 mA cm-2 in 0.5 m H2SO4 and 1.0 m KOH, respectively, which are markedly better than the performance of Pt wire electrode; furthermore, its price is three orders of magnitude lower than Pt. The chronopotentiometric curves recorded in the 50 - 1500 mA cm-2 range, confirmed its excellent long-term stability in acidic and alkaline media for more than 260 h. Density functional theory (DFT) calculations showed that the Mo2C(O)/MoO2 heterostructures has an optimum electronic structure with appropriate *H adsorption-free energy in an acidic medium and minimum water dissociation energy barrier in an alkaline medium.

Loading of Single Atoms of Iron, Cobalt, or Nickel to Enhance the Electrocatalytic Hydrogen Evolution Reaction of Two-Dimensional Titanium Carbide

The rational design of advanced electrocatalysts at the molecular or atomic level is important for improving the performance of hydrogen evolution reactions (HERs) and replacing precious metal catalysts. In this study, we describe the fabrication of electrocatalysts based on Fe, Co, or Ni single atoms supported on titanium carbide (TiC) using the molten salt method, i.e., TiC-FeSA, TiC-CoSA, or TiC-NiSA, to enhance HER performance. The introduction of uniformly distributed transition-metal single atoms successfully reduces the overpotential of HERs. Overpotentials of TiC-FeSA at 10 mA cm-2 are 123.4 mV with 61.1 mV dec-1 Tafel slope under acidic conditions and 184.2 mV with 85.1 mV dec-1 Tafel slope under alkaline conditions, which are superior to TiC-NiSA and TiC-CoSA. TiC samples loaded with transition-metal single atoms exhibit high catalytic activity and long stability under acidic and basic conditions. Density functional theory calculations indicate that the introduction of transition-metal single atoms effectively reduces the HER barrier of TiC-based electrocatalysts.

Introducing phosphorus atoms into MoS2 nanosheets through a vapor-phase hydrothermal process for the hydrogen evolution reaction

Molybdenum disulfide (MoS2)-based electrocatalysts have been considered as promising alternatives to platinum for use in the hydrogen evolution reaction (HER). Developing MoS2 electrocatalysts with more active sites has been recognized as an efficient way to enhance the HER activity. Moreover, phase transition and heteroatom doping show great influence on the HER performance. In this work, we develop a vapor-phase hydrothermal (VPH) approach to introduce phosphorus (P) atoms into a MoS2 nanosheet array on carbon fiber cloth, which presents enhanced HER activity compared with MoS2 without P-doping. The improved performance is due to the synergistic effects of the new active sites formed by the P dopants and the sulfur (S) vacancies in the MoS2 nanosheets generated by the doping of P atoms, which increases the number of active sites. In general, the obtained P-doped MoS2/CFC exhibits a lower onset potential of 80 mV and an overpotential of 162 mV at 10 mA cm-2 than MoS2 without P-doping in 0.5 M H2SO4, accompanied by extremely large cathodic current density and excellent stability. This strategy may open up opportunities for heteroatom doping of electrocatalysts for various applications and provide a new method for material synthesis.

Computational screening of layered metal chalcogenide materials for HER electrocatalysts, and its synergy with experiments

Layered materials have emerged as attractive candidates in our search for abundant, inexpensive and efficient hydrogen evolution reaction (HER) catalysts, due to larger specific area these offer. Among these, transition metal dichalcogenides have been studied extensively, while ternary transition metal tri-chalcogenides have emerged as promising candidates recently. Computational screening has emerged as a powerful tool to identify the promising materials out of an initial set for specific applications, and has been employed for identifying HER catalysts also. This article presents a comprehensive review of how computational screening studies based on density functional calculations have successfully identified the promising materials among the layered transition metal di- and tri-chalcogenides. Synergy of these computational studies with experiments is also reviewed. It is argued that experimental verification of the materials, predicted to be efficient catalysts but not yet tested, will enlarge the list of materials that hold promise to replace expensive platinum, and will help ushering in the much awaited hydrogen economy.

Well-Separated Photoinduced Charge Carriers on Hydrogen Production Using NiS2/TiO2 Nanocomposites

Photocatalytic hydrogen production is a sustainable and greenhouse-gas-free method that requires an efficient and abundant photocatalyst, which minimizes energy consumption. Currently, interests in transition metal chalcogenide materials have been utilized in different applications due to their quantum confinement effect and low band gaps. In this study, different wt % of NiS2-embedded TiO2 nanocomposites were synthesized by a facile hydrothermal method and utilized for photocatalytic hydrogen production under extended solar irradiation. Among the materials studied, the highest amount (4.185 mmol g-1) of hydrogen production was observed with 15 wt % of the NiS2/TiO2 nanocomposite. The highest photocatalytic activity may be due to the well separation of photoinduced charge carriers on the catalyst, which was confirmed by the electrochemical studies. Thus, we believe that these photocatalysts are promising candidates for future applications.

Nitrogen-doped Fe7S8 as highly efficient electrocatalysts for the hydrogen evolution reaction

The high unoccupied d band energy of FeS2 basically results in weak orbital coupling with water molecules, consequently leading to sluggish water dissociation kinetics. Herein, we demonstrate that the N-induced doping effect and phase transition engineering (FeS2 to N-Fe7S8) can downshift the unoccupied d orbitals and strengthen the interfacial orbital coupling to boost the water dissociation kinetics. The fabricated N-Fe7S8/carbon cloth (CC) displays superb hydrogen evolution reaction performance with a low overpotential (89 mV at 10 mA cm-2) and small Tafel slope (105 mV dec-1) under alkaline conditions. It is revealed that the electronic structure of Fe is modulated by N doping and phase transition. The downshifted d band energy can strengthen water adsorption and reduce the energy barrier of water dissociation. Our work provides a new strategy to modify metal sulfide electrocatalysts for electrochemical energy conversion.

Nitrogen Reduction Reaction to Ammonia on Transition Metal Carbide Catalysts

The development of a low-cost, energy-efficient, and environmentally friendly alternative to the currently utilized Haber-Bosch process to produce ammonia is of great importance. Ammonia is an essential chemical used in fertilizers and a promising high-density fuel source. The nitrogen reduction reaction (NRR) has been explored intensively as a potential avenue for ammonia production using water as proton source, but to this day a catalyst capable of producing this chemical at high Faradaic efficiency (FE) and commercial yield and rates has not been reported. Here, we investigate the activity of transition metal carbide (TMC) surfaces in the (100) facets of the rocksalt (RS) structure as potential catalysts for the NRR. In this study, we use density functional theory (DFT) to model reaction pathways, estimate stability, assess kinetic barriers, and compare adsorbate energies to determine the overall performance of each TMC surface. For pristine TMC surfaces (with no defects) we find that none of the studied TMCs possess both exergonic adsorption of nitrogen and the capability to selectively protonate nitrogen to form ammonia in the desired aqueous solution. ZrC, however, is shown to be a potential catalyst if used in a non-aqueous electrolyte. To circumvent the endergonic adsorption of nitrogen onto the surface, a carbon vacancy was introduced. This provides a well-defined high coordination active site on the surface. In the presence of a vacancy VC, NbC, and WC showed efficient nitrogen adsorption, selectivity towards ammonia, and a low overpotential (OP). NbC did, however, display an unfeasible kinetic barrier to nitrogen dissociation for ambient-condition purposes, and thus it is suggested for high tempearture/pressure ammonia synthesis. Both WC and VC in their RS (100) structure are promising materials for experimental investigations in aqueous electrolytes, and ZrC could potentially be interesting for non-aqueous electrolytic systems.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Molybdenum Phosphide Quantum Dots Encapsulated by P/N-Doped Carbon for Hydrogen Evolution Reaction in Acid and Alkaline Electrolytes

A facile and eco-friendly strategy is presented for synthesizing novel nanocomposites, with MoP quantum dots (QDs) as cores and graphitic carbon as shells, these nanoparticles are dispersed in a nitrogen and phosphorus-doped porous carbon and carbon nanotubes (CNTs) substrates (MoP@NPC/CNT). The synthesis involves self-assembling reactions to form single-source precursors (SSPs), followed by pyrolysis at 900 °C in an inert atmosphere to obtain MoP@NPC/CNT-900. The presence of carbon layers on the MoP QDs effectively prevents particle aggregation, enhancing the utilization of active MoP species. The optimized sample, MoP@NPC/CNT-900, exhibits remarkable electrocatalytic activity and durability for the hydrogen evolution reaction (HER). It demonstrates a low overpotential of 155 mV at 10 mA cm-2 , a small Tafel slope of 76 mV dec-1 , and sustained performance over 20 hours in 0.5 M H2 SO4 . Furthermore, the catalyst shows excellent activity in 1 M KOH, with a relatively low overpotential of 131 mV and long-term durability under constant current input. The exceptional HER activity can be attributed to several factors: the superior performance of MoP QDs, the large surface area and good conductivity of the carbon substrates, and the synergistic effect between MoP and carbon species.

Atomic-scale insights into the interfacial charge transfer in a NiO/CeO2 heterostructure for electrocatalytic hydrogen evolution

To understand the underlying mechanism of the interfacial charge transfer and local chemical state variation in the nonprecious-based hydrogen evolution reaction (HER) electrocatalysts, a model system of the NiO/CeO₂ heterostructure was chosen for investigation using a combination of the advanced electron microscopic characterization and first-principles calculations. The results directly proved that interfacial charge transfer occurs from Ni to Ce, leading to reduction in the valence state of Ce and increased formation of V_O. This would optimize ΔG_H* and facilitate the hydrogen evolution process, resulting in outstanding HER performance in 1 M KOH with a low overpotential of 99 mV at the current density of 10 mA•cm^-2 and a modest Tafel slope of 78.4 mV•dec^-1 for the NiO/CeO₂ heterostructure sample. Therefore, the improved HER performance could be attributed to the synergistic coupling interactions and electron redistribution at the interface of NiO and CeO₂. These results concretely demonstrate the direct determination of the interfacial structure of the heterostructure and provide atomistic insights to unravel the underlying mechanism of interfacial charge transfer induced HER performance improvement.

Self-supported amorphous phosphide catalytic electrodes for electrochemical hydrogen production coupling with methanol upgrading

Efficient catalytic electrodes for cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER) are pivotal for massive production of green hydrogen from water electrolysis, and the further replacement of kinetically sluggish OER by tailored elecrooxidation of certain organics is a promising way to co-produce hydrogen and value-added chemicals via a more energy-saving and safer manner. Herein, amorphous Ni-Co-Fe ternary phosphides (Ni_xCo_yFe_z-Ps) with different Ni:Co:Fe ratios electrodeposited onto Ni foam (NF) substrate were served as self-supported catalytic electrodes for alkaline HER and OER. The Ni₄Co₄Fe₁-P electrode deposited in solution at Ni:Co:Fe ratio of 4:4:1 displayed low overpotential (61 mV at -20 mA cm^-2) and acceptable durability for HER, while the Ni₂Co₂Fe₁-P electrode fabricated in deposition solution at Ni:Co:Fe ratio of 2:2:1 showed good OER efficiency (overpotential of 275 mV at 20 mA cm^-2) and robust durability, the further replacement of OER by anodic methanol oxidation reaction (MOR) enabled selective production of formate with 110 mV lower anodic potential at 20 mA cm^-2. The HER-MOR co-electrolysis system based on Ni₄Co₄Fe₁-P cathode and Ni₂Co₂Fe₁-P anode could save 1.4 kWh of electric energy per cubic meter of H₂ relative to mere water electrolysis. The current work offers a feasible approach to co-produce H₂ and value-upgraded formate via an energy-saving manner by rational design of catalytic electrodes and construction of co-electrolysis system, and paves the way for cost-effective co-preparation of more value-added organics and green hydrogen via electrolysis.

Sputtered binder-free Cu3N electrode materials for high-performance quasi-solid-state asymmetric supercapacitors

Developing high-efficiency electrode materials is of great importance in manufacturing supercapacitor devices with superior electrochemical performance. Herein, we for the first time report a binder-free method for controllable growth of Cu₃N electrode materials via magnetron sputtering for supercapacitor applications. Benefiting from their unique polyhedral structure and good electrical conductivity, Cu₃N electrodes can achieve an areal capacity of 90.7 mC cm^-2 at 1 mA cm^-2 and outstanding cycling stability with a capacity retention of 97.4% after 20 000 cycles. In particular, the assembled Cu₃N//active carbon quasi-solid-state asymmetric supercapacitor can exhibit a maximum energy density of 13.2 μW h cm^-2 and a power density of 4.8 mW cm^-2 with an operating voltage of 1.6 V. These remarkable performances demonstrate the great potential of sputtered Cu₃N electrode materials for future energy storage applications.

Carbon Nanotube Supported Molybdenum Carbide as Robust Electrocatalyst for Efficient Hydrogen Evolution Reaction

Molybdenum carbide is considered to be one of the most competitive catalysts for hydrogen evolution reaction (HER) regarding its high catalytic activity and superior corrosion resistance. But the low electrical conductivity and poor interfacial contact with the current collector greatly inhibit its practical application capability. Herein, carbon nanotube (CNT) supported molybdenum carbide was assembled via electrostatic adsorption combined with complex bonding. The N-doped molybdenum carbide nanocrystals were uniformly anchored on the surfaces of amino CNTs, which depressed the agglomeration of nanoparticles while strengthening the migration of electrons. The optimized catalyst (250-800-2h) showed exceptional electrocatalytic performance towards HER under both acidic and alkaline conditions. Especially in 0.5 M H₂SO₄ solution, the 250-800-2h catalyst exhibited a low overpotential of 136 mV at a current density of 10 mA/cm² (η₁₀) with the Tafel slope of 49.9 mV dec^-1, and the overpotential only increased 8 mV after 20,000 cycles of stability test. The active corrosive experiment revealed that more exposure to high-activity γ-Mo₂N promoted the specific mass activity of Mo, thus, maintaining the catalytic durability of the catalyst.

Recent Advances in Carbon Dioxide Adsorption, Activation and Hydrogenation to Methanol using Transition Metal Carbides

The inevitable emission of carbon dioxide (CO₂ ) due to the burning of a substantial amount of fossil fuels has led to serious energy and environmental challenges. Metal-based catalytic CO₂ transformations into commodity chemicals are a favorable approach in the CO₂ mitigation strategy. Among these transformations, selective hydrogenation of CO₂ to methanol is the most promising process that not only fulfils the energy demands but also re-balances the carbon cycle. The investigation of CO₂ adsorption on the surface of heterogeneous catalyst is highly important because the formation of various intermediates which determines the selectivity of product. Transition metal carbides (TMCs) have received considerable attention in recent years because of their noble metal-like reactivity, ceramic-like properties, high chemical and thermal stability. These features make them excellent catalytic materials for a variety of transformations such as CO₂ adsorption and its conversion into value-added chemicals. Herein, the catalytic properties of TMCs are summarize along with synthetic methods, CO₂ binding modes, mechanistic studies, effects of dopant on CO₂ adsorption, and carbon/metal ratio in the CO₂ hydrogenation reaction to methanol using computational as well as experimental studies. Additionally, this Review provides an outline of the challenges and opportunities for the development of potential TMCs in CO₂ hydrogenation reactions.

Tuning the Electronic Structure of Cobalt Selenide on Copper Foam by Introducing a Ni Buffer Layer for Highly Efficient Electrochemical Water Splitting

The development of a cost-effective, remarkably competent, and durable bifunctional electrocatalyst is the foremost requirement of water splitting to generate H₂ fuel as a renewable energy technology. Three-dimensional porous copper foam (Cuf) when electrochemically decorated with transition metal selenide results in a highly active electrocatalyst for adequate water electrolysis. In terms of water splitting, the role of cobalt selenide and Cuf has already proven to be remarkable. The introduction of a Ni buffer layer between Cuf and cobalt selenide (Cuf@Ni-CoSe₂) acts as a valve to enhance the electron thrust from the substrate to the material surface with no compromise in the overall material conductivity, which not only increases the efficiency and activity but also improves the stability of the catalyst. The self-supported synthesized catalyst material showed an admirable activity toward the oxygen evolution reaction and hydrogen evolution reaction in alkaline media. The performance of the catalyst was found to be significantly better than that of the noble catalyst RuO₂. The catalyst was very stable up to 93 h and attained a full cell voltage of only 1.52 V at a current density of 10 mA cm^-2. Therefore, for large-scale hydrogen production, this as-synthesized catalyst hss the potential to replace conventional fossil fuel-based energy systems.

Carbonate-Hydroxide Induced Metal-Organic Framework Transformation Strategy for Honeycomb-Like NiCoP Nanoplates to Drive Enhanced pH-Universal Hydrogen Evolution

Developing a low-cost, pH-universal electrocatalyst is desirable for electrochemical water splitting but remains a challenge. NiCoP is a promising non-noble hydrogen-evolving electrocatalyst due to its high intrinsic electrical conductivity, fast mass transfer effects, and tunable electronic structure. Nevertheless, its hydrogen evolution reaction (HER) activity in full pH-range has been rarely developed. Herein, a Ni-Co carbonate-hydroxide induced metal-organic framework transformation strategy is proposed to in situ grow porous, honeycomb-like NiCoP nanoplates on Ni foam for high-performance, pH-universal hydrogen evolution reaction. The resultant NiCoP catalyst exhibits a highly 2D nanoporous network in which 20-50 nm, well-crystalline nanoparticles are interconnected with each other closely, and delivers versatile HER electroactivity with η₁₀ of 98, 105, and 97 mV in 1 m KOH, 0.5 m H₂ SO₄ , and 1 m phosphate buffer solution electrolytes, respectively. This overpotential remarkably surpasses the one of commercial Pt/Cs in both neutral and alkaline media at a large current density (>100 mA cm^-2 ). The corresponding full water-splitting electrolyzer constructed from the 2D porous NiCoP cathode requires only a cell voltage of 1.43 V at 10 mA cm^-2 , superior to most recently reported electrocatalysts. This work may open up a new avenue on the rational design of nonprecious, pH-universal electrocatalyst.

Insight into Point Defects and Complex Defects in β-Mo2C and Carbide Evolution from First Principles

In this paper, first principles method was adopted to investigate the point defects, Vanadium-related defects and defect combinations (vacancy (V), substitutional (S) and/or interstitial (I)) in molybdenum β-Mo₂C and explore the use of first principles calculation data in analysing the link between different carbides and the effects of doping elements. Supercell models with different defect types were established and optimized, and the formation energy data of defects was developed. The structure evolution during the optimization process is analysed in detail to establish the main characteristics of changes and the relevant electronic properties. The data for different types of intrinsic defects and combined defects complexes was developed and key results is analysed. The results show that carbon vacancy (V_C) is stable but does not inevitably exist in pure β-Mo₂C. Interstitial site II is a very unstable position for any type of atoms (Mo, V and C), and analysis of the structure evolution shows that the atom always moves to the interface area near the interstitial site I between two layers. In particular, a C atom can expand the lattice structure when it exists between the layer interfaces. One type of the defects studied, the substitution of Mo with V (designated as ‘S_V-Mo’), is the most stable defect among all single point defects. The data for defect complexes shows that the combination of multiple S_V-Mo defects in the super cell being more stable than the combination of other defects (e.g., ‘V_Mo+I_C’, ‘S_V-Mo+V_C’). The data with increasing S_V-Mo in (Mo, V)₂C system is developed, and typical data (e.g., formation energy) for Mo-rich carbides and V carbides are correlated and the potential of the data in analysing transition of different carbides is highlighted. The relevance of using first principles calculation data in the studying of V-doping and the complex carbides (V- and Mo-rich carbides) evolution in different materials systems and future focus of continuous work is also discussed.

Mo2C as Pre-Catalyst for the C-H Allylic Oxygenation of Alkenes and Terpenoids in the Presence of H2O2

In this study, commercially available molybdenum carbide (Mo2C) was used, in the presence of H2O2, as an efficient pre-catalyst for the selective C-H allylic oxygenation of several unsaturated molecules into the corresponding allylic alcohols. Under these basic conditions, an air-stable, molybdenum-based polyoxometalate cluster (Mo-POM) was formed in situ, leading to the generation of singlet oxygen (1O2), which is responsible for the oxygenation reactions. X-ray diffraction, SEM/EDX and HRMS analyses support the formation mainly of the Mo6O192− cluster. Following the proposed procedure, a series of cycloalkenes, styrenes, terpenoids and methyl oleate were successfully transformed into hydroperoxides. After subsequent reduction, the corresponding allylic alcohols were produced with good yields and in lab-scale quantities. A mechanistic study excluded a hydrogen atom transfer pathway and supported the twix-selective oxygenation of cycloalkenes on the more sterically hindered side via the 1O2 generation.

Designing Nanoengineered Photocatalysts for Hydrogen Generation by Water Splitting and Conversion of Carbon Dioxide to Clean Fuels

Semiconductor photocatalysis has received tremendous attention in the past decade as it has shown great promise in the context of clean energy harvesting for environmental remediation. Sunlight is an inexhaustible source of energy available to us throughout the year, although it is rather dilutely dispersed. Semiconductor based photocatalysis presents one of the best ways to harness this source of energy to carry out chemical reactions of interest that require external energy input. Photocatalytic hydrogen generation by splitting of water, CO₂ mitigation, and CO₂ conversion to green fuel have therefore become the highly desirable clean and sustainable processes for a better tomorrow. Although numerous efforts have been made and continue to be expended to search and develop new classes of photocatalyst materials in recent years, several significant challenges still remain to be resolved before photocatalysis can reach its commercial potential. Therefore, major attention is required towards improving the efficiencies of the existing photocatalysts by further manipulating them and parallelly employing newer strategies for novel photocatalyst designs. This personal account aims to provide a broad overview of the field primarily invoking examples of our own research contributions in the field, which include photocatalytic hydrogen generation and CO₂ reduction to value added chemicals. This account reviews the state-of-the-art research activities and scientific possibilities which a functional material can offer if its properties are put to best use through goal-oriented design by combining with other compatible materials. We have addressed fundamental principles of photocatalysis, different kind of functional photocatalysts, critical issues associated with them and various strategies to overcome the related hurdles. It is our hope that this current personal account will provide a platform for young researchers to address the bottleneck issues in the field of photocatalysis and photocatalysts with a sense of clarity, and to find innovative solutions to resolve them by a prudent choice of materials, synthesis protocols, and approaches to boost the photocatalysis output. We emphasize that a targeted or goal-directed photocatalyst nanoengineering as perhaps the only way to realize an early success in this multiparametric domain.

Strategies to improve electrocatalytic performance of MoS2-based catalysts for hydrogen evolution reactions

Electrocatalytic hydrogen evolution reactions (HERs) are a key process for hydrogen production for clean energy applications. HERs have unique advantages in terms of energy efficiency and product separation compared to other methods. Molybdenum disulfide (MoS2) has attracted extensive attention as a potential HER catalyst because of its high electrocatalytic activity. However, the HER performance of MoS2 needs to be improved to make it competitive with conventional Pt-based catalysts. Herein, we summarize three typical strategies for promoting the HER performance, i.e., defect engineering, heterostructure formation, and heteroatom doping. We also summarize the computational density functional theory (DFT) methods used to obtain insight that can guide the construction of MoS2-based materials. Additionally, the challenges and prospects of MoS2-based catalysts for the HER have also been discussed.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Electrodeposition: An efficient method to fabricate self-supported electrodes for electrochemical energy conversion systems

The development of electrocatalysts for energy conversion systems is essential for alleviating environmental problems and producing useful energy sources as alternatives to fossil fuels. Improving the catalytic performance and stability of electrocatalysts is a major challenge in the development of energy conversion systems. Moreover, understanding their electrode structure is important for enhancing the energy efficiency. Recently, binder-free self-supported electrodes have been investigated because the seamless contact between the electrocatalyst and substrate minimizes the contact resistance as well as facilitates fast charge transfer at the catalyst/substrate interface and high catalyst utilization. Electrodeposition is an effective and facile method for fabricating self-supported electrodes in aqueous solutions under mild conditions. Facile fabrication without a polymer binder and controlability of the compositional and morphological properties of the electrocatalyst make electrodeposition methods suitable for enhancing the performance of energy conversion systems. Herein, we summarize recent research on self-supported electrodes fabricated by electrodeposition for energy conversion reactions, particularly focusing on cathodic reactions of electrolyzer system such as hydrogen evolution, electrochemical CO2 reduction, and electrochemical N2 reduction reactions. The deposition conditions, morphological and compositional properties, and catalytic performance of the electrocatalyst are reviewed. Finally, the prospective directions of electrocatalyst development for energy conversion systems are discussed.

Pt- and Pd-modified transition metal nitride catalysts for the hydrogen evolution reaction

Hydrogen production via electrochemical splitting of water using renewable electricity represents a promising strategy. Currently, platinum group metals (PGMs) are the best performing hydrogen evolution reaction (HER) catalysts. Thus, the design of non-PGM catalysts or low-loading PGM catalysts is essential for the commercial development of hydrogen generation technologies via electrochemical splitting of water. Here, we employed density functional theory (DFT) calculations to explore Pt and Pd modified transition metal nitrides (TMNs) as low-cost HER catalysts. Our calculations show that Pt/Pd binds strongly with TMs on TMN(111) surfaces, leading to the formation of stable Pt and Pd-monolayer (ML)-TMN(111) structures. Furthermore, our calculated hydrogen binding energy (HBE) demonstrates that Pt/MnN, Pt/TiN, Pt/FeN, Pt/VN, Pt/HfN, Pd/FeN, Pd/TaN, Pd/NbN, Pd/TiN, Pd/HfN, Pd/MnN, Pd/ScN, Pd/VN, and Pd/ZrN are promising candidates for the HER with a low value of limiting potential (U_L) similar to that calculated on Pt(111).

Bifunctional WC-Supported RuO2 Nanoparticles for Robust Water Splitting in Acidic Media

We report the strong catalyst-support interaction in WC-supported RuO₂ nanoparticles (RuO₂ -WC NPs) anchored on carbon nanosheets with low loading of Ru (4.11 wt.%), which significantly promotes the oxygen evolution reaction activity with a η₁₀ of 347 mV and a mass activity of 1430 A g_Ru ^-1 , eight-fold higher than that of commercial RuO₂ (176 A g_Ru ^-1 ). Theoretical calculations demonstrate that the strong catalyst-support interaction between RuO₂ and the WC support could optimize the surrounding electronic structure of Ru sites to reduce the reaction barrier. Considering the likewise excellent catalytic ability for hydrogen production, an acidic overall water splitting (OWS) electrolyzer with a good stability constructed by bifunctional RuO₂ -WC NPs only requires a cell voltage of 1.66 V to afford 10 mA cm^-2 . The unique 0D/2D nanoarchitectures rationally combining a WC support with precious metal oxides provides a promising strategy to tradeoff the high catalytic activity and low cost for acidic OWS applications.

Alleviation of cadmium stress in rice by inoculation of Bacillus cereus

Heavy metal resistant bacteria are of great importance because they play a crucial role in bioremediation. In the present study, 11 bacterial strains isolated from industrial waste were screened under different concentrations of cadmium (Cd) (100 µM and 200 µM). Among 11 strains, the Cd tolerant Bacillus cereus (S₆D_1-105) strain was selected for in vitro and in vivo studies. B. cereus was able to solubilize potassium, and phosphate as well as produce protease and siderophores during plate essays. Moreover, we observed the response of hydroponically grown rice plants, inoculated with B. cereus which was able to promote plant growth, by increasing plant biomass, chlorophyll contents, relative water content, different antioxidant enzymatic activity such as catalase, superoxide dismutase, ascorbate peroxidase, polyphenol oxidase and phenylalanine ammonia-lyase and reducing malondialdehyde content in both roots and leaves of rice plants under Cd stress. Our results showed that the B. cereus can be used as a biofertilizer which might be beneficial for rice cultivation in Cd contaminated soils.