XPS Depth-Profiling Studies of Chlorophyll Binding to Poly(cysteine methacrylate) Scaffolds in Pigment-Polymer Antenna Complexes Using a Gas Cluster Ion Source

X-ray photoelectron spectroscopy (XPS) depth-profiling with an argon gas cluster ion source (GCIS) was used to characterize the spatial distribution of chlorophyll a (Chl) within a poly(cysteine methacrylate) (PCysMA) brush grown by surface-initiated atom-transfer radical polymerization (ATRP) from a planar surface. The organization of Chl is controlled by adjusting the brush grafting density and polymerization time. For dense brushes, the C, N, S elemental composition remains constant throughout the 36 nm brush layer until the underlying gold substrate is approached. However, for either reduced density brushes (mean thickness ∼20 nm) or mushrooms grown with reduced grafting densities (mean thickness 6-9 nm), elemental intensities decrease continuously throughout the brush layer, because photoelectrons are less strongly attenuated for such systems. For all brushes, the fraction of positively charged nitrogen atoms (N+/N0) decreases with increasing depth. Chl binding causes a marked reduction in N+/N0 within the brushes and produces a new feature at 398.1 eV in the N1s core-line spectrum assigned to tetrapyrrole ring nitrogen atoms coordinated to Zn2+. For all grafting densities, the N/S atomic ratio remains approximately constant as a function of brush depth, which indicates a uniform distribution of Chl throughout the brush layer. However, a larger fraction of repeat units bound to Chl is observed at lower grafting densities, reflecting a progressive reduction in steric congestion that enables more uniform distribution of the bulky Chl units throughout the brush layer. In summary, XPS depth-profiling using a GCIS is a powerful tool for characterization of these complex materials.

Recent advances in photoluminescent fluorescent probe technology for food flavor compounds analysis

The real-time, precise qualitative and quantitative sensing of food flavor compounds is crucial for ensuring food safety, quality, and consumer acceptance. As indicators for food flavor labeling, it is vital to delve deep into the specific ingredient and content of food flavor compounds to assess the food flavor quality, but still facing huge challenges. Photoluminescent fluorescent probe technology, with fast detection and high sensitivity, has shown immense potentials in detecting food flavor compounds. In this review, the classification and optical sensing mechanism of photoluminescent fluorescent probe technology are described in detail. Besides, challenges in applying photoluminescent fluorescent probe technology to analyze food flavor compounds are outlined to indicate future research directions. We hope this review can provide an insight for the applications of photoluminescent fluorescent probe technology in the evaluation of food flavor quality in future.

Illuminating the Path to Enhanced Bioimaging by Phosphole-based Fluorophores

As the research of biological systems becomes increasingly complex, there is a growing demand for fluorophores with a diverse range of wavelengths. In this study, we introduce phosphole-based fluorophores that surpass existing options like dansyl chloride. The reactive S-Cl bond in chlorosulfonylimino-5-phenylphosphole derivatives allows rapid and direct coupling to peptides making the fluorophores easily introducible to peptides. This coupling process occurs under mild conditions, demonstrated for [F7 ,P34 ]-NPY and its shorter analogues. Peptides linked with our fluorophores exhibit similar receptor activation to the control peptide, while maintaining high stability and low toxicity, making them ideal biolabeling reagents. In fluorescence microscopy experiments, they can be easily visualized even at low concentrations, without suffering from the typical issue of bleaching. These phosphole-based fluorophores represent a significant leap forward in the field. Their versatility, ease of modification, superior performance, and applicability in biological labeling make them a promising choice for researchers seeking advanced tools to unravel the details of complex biological systems.

A Synthetic Route to Highly Substituted 1-Aminonaphthalenes from Readily Available Benzaldehydes

We report an efficient route for the synthesis of highly substituted 1-aminonaphthalenes from benzaldehydes. The method employs a stereoselective Still-Gennari modification of the Horner-Wadsworth-Emmons olefination to afford (E)-benzylidenesuccinonitrile precursors, which undergo Bronsted acid mediated benzannulation to afford 1-aminonaphthalene derivatives in 35-95% yield. The abundance of commercially available benzaldehydes, coupled with the simplicity of our method, enables many previously unexplored naphthalene substitution patterns to become readily accessible.

Highly Sensitive Detection of Bacteria by Binder-Coupled Multifunctional Polymeric Dyes

Infectious diseases caused by pathogens are a health burden, but traditional pathogen identification methods are complex and time-consuming. In this work, we have developed well-defined, multifunctional copolymers with rhodamine B dye synthesized by atom transfer radical polymerization (ATRP) using fully oxygen-tolerant photoredox/copper dual catalysis. ATRP enabled the efficient synthesis of copolymers with multiple fluorescent dyes from a biotin-functionalized initiator. Biotinylated dye copolymers were conjugated to antibody (Ab) or cell-wall binding domain (CBD), resulting in a highly fluorescent polymeric dye-binder complex. We showed that the unique combination of multifunctional polymeric dyes and strain-specific Ab or CBD exhibited both enhanced fluorescence and target selectivity for bioimaging of Staphylococcus aureus by flow cytometry and confocal microscopy. The ATRP-derived polymeric dyes have the potential as biosensors for the detection of target DNA, protein, or bacteria, as well as bioimaging.

Tunable Fluorescence via Self-Assembled Switching of AIE-Active Micelle-like Nanoaggregates

Chemical structures bearing a combination of aggregation-induced emission enhancement (AIEE) and intramolecular charge transfer (ICT) properties attracted the attention of many researchers. Recently, there is an increasing demand to pose tunable AIEE and ICT fluorophores that could present their conformation changes-related emission colors by adjusting the medium polarity. In this study, we designed and synthesized a series of 4-alkoxyphenyl-substituted 1,8-naphthalic anhydride derivatives NAxC using the Suzuki coupling reaction to construct donor-acceptor (D-A)-type fluorophores with alkoxyl substituents of varying carbon chain lengths (x = 1, 2, 4, 6, 12 in NAxC). To explain the observation that molecules with longer carbon chains revealed unusual fluorescence enhancement in water, we study the optical properties and evaluate their locally excited (LE) and ICT states by solvent effects combined with Lippert-Mataga plots. Then, we explored the self-assembly abilities of these molecules in water-organic (W/O) mixed solutions and observed the morphology of its nanostructure using a fluorescence microscope and SEM. The results show that NAxC, x = 4, 6, 12 show different degrees of self-assembly behaviors and corresponding aggregation-induced emission enhancement (AIEE) progresses. At the same time, different nanostructures and corresponding spectral changes can be obtained by adjusting the water ratio in the mixed solution. That is, NAxC compounds present different transitions between LE, ICT and AIEE based on the polarity, water ratio and time changes. We designed NAxC as the structure-activity relationship (SAR) of the surfactant to demonstrate that AIEE comes from the formation of micelle-like nanoaggregates, which causes a restriction of the transfer from the LE state to the ICT state, and micelle formation results in a blue-shift in emission and enhances the intensity in the aggregate state. Among them, NA12C is most likely to form micelles and the most obvious fluorescence enhancement, which will switch over time due to the nano-aggregation transition.

Synthesis and Application of Fluorescent Polymer Micro- and Nanoparticles

Fluorescent polymer particles have witnessed an increasing interest in recent years, owing to their fascinating physicochemical properties as well as wide-ranging applications. In this review, the state-of-the-art research progress of fluorescent polymer particles in the past five years is summarized. First, the synthesis protocols for fluorescent polymer particles, including emulsion polymerization, precipitation polymerization, dispersion polymerization, suspension polymerization, nanoprecipitation, self-assembly, and post-polymerization modification, are presented in detail. Then, the applications of the resulting beguiling particles in anticounterfeiting, chemical sensing, and biomedicine, are illustrated. Finally, the challenges and opportunities that exist in the field are pointed out. This review aims to offer important guidance and stimulate more research attention to this rapidly developing field.

Recent Advances in Drug Release, Sensing, and Cellular Uptake of Ring-Opening Metathesis Polymerization (ROMP) Derived Poly(olefins)

The synthesis and applications of ring-opening metathesis polymerization (ROMP) derived poly(olefins) have emerged as an exciting area of great interest in the field of biomaterials science. The major focus of this mini-review is to present recent advances in the synthesis of functional materials using ROMP-derived poly(olefins) utilized for drug release, sensing, and cellular uptake in the past seven years (2015-2022). This review reveals that materials synthesized by ROMP-derived well-defined functional poly(olefins) stand to be highly promising systems for medical as well as biological studies. Thus, this review may prove to be beneficial for the design and development of new smart and flexible-functionality ROMP-based polymeric materials for various biological applications.

Rhodamine-Tagged Polymethacrylate Dyes as Alternative Tools for Analysis of Plant Cells

A rhodamine B (RhB)-based initiator for atom transfer radical polymerization (ATRP) was synthesized and applied for preparation of poly(2-trimethylammoniumethyl methacrylate) (PChMA), poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(2-trimethylsilyloxyethyl methacrylate) (PHEMATMS). Polymer fluorescence was confirmed by determination of quantum yield by comparative method with piroxicam as the standard exhibiting dependency of emission intensity on the polymer chain hydrophilicity and the kind of solvent. The RhB functionalized polymers were used for biological tests in plant materials except for RhB-PHEMATMS because of weak fluorescence. These two polymers slightly differed in cellular localization. RhB-PChMA was mostly observed in cell walls of root tissues and cotyledon epidermis. It was also observed in cytoplasm and cell organelles of root cap cells and rhizodermis, in contrast with cytoplasm of cotyledon epidermis. RhB-PHEMA was also present in apoplast. A strong signal in protoxylem cell walls and a weak signal in cell walls of rhizodermis and cortex were visible. Moreover, it was also present in cell walls of cotyledon epidermis. However, RhB-PHEMA was mostly observed in cytoplasm and cell organelles of all root tissues and epidermis of cotyledons. Both RhB-polymers did not cause cell death which means that they can be used in living plant material.

Highly Retentive, Anti-Interference, and Covert Individual Marking Taggant with Exceptional Skin Penetration

The development of high-performance individual marking taggants is of great significance. However, the interaction between taggant and skin is not fully understood, and a standard for marking taggants has yet to be realized. To achieve a highly retentive, anti-interference, and covert individual marking fluorescent taggant, Mn²⁺ -doped NaYF₄ :Yb/Er upconversion nanoparticles (UCNPs), are surface-functionalized with polyethyleneimine (PEI) to remarkably enhance the interaction between the amino groups and skin, and thus to facilitate the surface adhesion and chemical penetration of the taggant. Electrostatic interaction between PEI₆₀₀ -UCNPs and skin as well as remarkable penetration inside the epidermis is responsible for excellent taggant retention capability, even while faced with robust washing, vigorous wiping, and rubbing for more than 100 cycles. Good anti-interference capability and reliable marking performance in real cases are ensured by an intrinsic upconversion characteristic with a distinct red luminescent emission under 980 nm excitation. The present methodology is expected to shed light on the design of high-performance individual marking taggants from the perspective of the underlying interaction between taggant and skin, and to help advance the use of fluorescent taggants for practical application, such as special character tracking.

Fluorescent labeling as a strategy to evaluate uptake and transport of polymeric nanoparticles in plants

The use of biodegradable nanopolymers in agriculture offers an excellent alternative for the efficient delivery of agrochemicals that promote plant protection and development. However, tracking of these systems inside plants requires complex probe tagging strategies. In addition to providing a basis for better understanding such nanostructures to optimize delivery system design, these probes allow monitoring the migration of nanoparticles through plant tissues, and determine accumulation sites. Thus, these probes are powerful tools that can be used to quantify and visualize nanoparticle accumulation in plant cells and tissues. This review is an overview of the methods involved in labeling nanocarriers, mainly based on polymeric matrices, for the delivery of nanoagrochemicals and the recent advances in this field.

Robust Chemical Strategy for Stably Labeling Polyester-Based Nanoparticles with BODIPY Fluorophores

Aliphatic polyesters are among materials most extensively used for producing biodegradable polymeric nanoparticles currently in development as delivery carriers and imaging agents for a range of biomedical applications. Their clinical translation requires robust particle labeling methodologies that allow reliably monitoring the fate of these formulations in complex biological environments. In the present study, a practical and versatile synthetic strategy providing conjugates of poly(D,L-lactide) representative of this class of polymers with BODIPY fluorophores varying in functional groups and excitation/emission maxima was investigated as a tool for making traceable nanoparticles. Polymer-probe conjugation was accomplished by carbodiimide-induced and 4-(dimethylamino)pyridinium 4-toluenesulfonate-catalyzed esterification of the polymer's terminal hydroxyl group, either directly with a carboxy-functionalized fluorophore or with amine-protected amino acids (Boc-glycine or Boc-6-aminohexanoic acid). In the latter case, the amino acid-derivatized polymeric precursors were reacted with amine-reactive BODIPY dyes after the removal of the protective group. Unlike nanoparticles encapsulating a strongly hydrophobic BODIPY_505/515 (logP_o/w = 4.3), nanoparticles labeled covalently with its carboxy-functionalized analogue (BODIPY FL) demonstrated stable particle-tracer association under perfect sink conditions. Furthermore, in contrast to the encapsulated dye rapidly partitioning from particles onto cell membranes but not stably retained by cultured cells, the internalization of the covalently attached probe was an irreversible process requiring the presence of serum, consistent with active nanoparticle uptake by endocytosis. In conclusion, the conjugation of particle-forming polymers with BODIPY fluorophores offers an effective and accessible labeling strategy for making traceable polyester-based biodegradable nanoparticles and is expected to facilitate their development and optimization as therapeutic carriers and diagnostic agents.

Active control of strong plasmon-exciton coupling in biomimetic pigment-polymer antenna complexes grown by surface-initiated polymerisation from gold nanostructures

Plexcitonic antenna complexes, inspired by photosynthetic light-harvesting complexes, are formed by attachment of chlorophylls (Chl) to poly(cysteine methacrylate) (PCysMA) scaffolds grown by atom-transfer radical polymerisation from gold nanostructure arrays. In these pigment–polymer antenna complexes, localised surface plasmon resonances on gold nanostructures are strongly coupled to Chl excitons, yielding hybrid light–matter states (plexcitons) that are manifested in splitting of the plasmon band. Modelling of the extinction spectra of these systems using a simple coupled oscillator model indicates that their coupling energies are up to twice as large as those measured for LHCs from plants and bacteria. Coupling energies are correlated with the exciton density in the grafted polymer layer, consistent with the collective nature of strong plasmon–exciton coupling. Steric hindrance in fully-dense PCysMA brushes limits binding of bulky chlorophylls, but the chlorophyll concentration can be increased to ∼2 M, exceeding that in biological light-harvesting complexes, by controlling the grafting density and polymerisation time. Moreover, synthetic plexcitonic antenna complexes display pH- and temperature-responsiveness, facilitating active control of plasmon–exciton coupling. Because of the wide range of compatible polymer chemistries and the mild reaction conditions, plexcitonic antenna complexes may offer a versatile route to programmable molecular photonic materials.

Excitons in pigment–polymer antenna complexes formed by attachment of chlorophyll to surface grafted polymers are coupled strongly to plasmon modes, with coupling energies twice those for biological light-harvesting complexes and active control of plasmon–exciton coupling.

Investigation of two-photon polymerized microstructures using fluorescence lifetime measurements

A fluorescent molecular rotor is exploited as a viscosity probe to reveal heterogeneity in multi-material microstructures made by two-photon polymerization. These results open the door to probe the 4D character of active 3D microstructures.

A polymerization-induced gelation process visualized by nontraditional clustering-triggered emission

A kind of organogel with distinct CTE properties was synthesized via a PISA process. Fluorescence variation could be employed to realize the visualization of the PISA process according to the CTE mechanism.

Enantioselective Synthesis of Spiropyrazolone-Fused Cyclopenta[c]chromen-4-ones Bearing Five Contiguous Stereocenters via (3+2) Cycloaddition

An enantioselective synthesis of spiropyrazolone-fused cyclopenta[c]chromen-4-ones is demonstrated via a (3+2) cycloaddition reaction. The reactions of 3-homoacylcoumarins and α,β-unsaturated pyrazolones in the presence of the cinchona-alkaloid derived hydrogen-bonding catalyst provide aforementioned spiropyrazolone-chromenone adducts bearing five contiguous stereocenters, of which one is the spiro all-carbon quaternary stereocenter in high yields (up to 98%) with good to excellent stereoselectivities (>25:1 dr and up to 99% ee). This one-pot methodology could also be practically demonstrated on a gram-scale with similar efficacy.

Highly sensitive fluorescent sensor based on coumarin organic dye for pyrophosphate ion turn-on biosensing in synovial fluid

Highly sensitive fluorescence detection of pyrophosphate ion (PPi) is in urgent demand but remains a great obstacle, ascribing to scarcity of high-performance materials with promising optical property and high affinity. Herein, we report the design and fabrication of a coumarin-based organic dye (DCCH-TPD) containing both hydrazide group and terpyridine moiety for PPi biosensing through Cu²⁺-induced photo-electron transfer (PET) effect and target analyte-switched competitive coordination reaction. Individual DCCH-TPD was found to be highly emissive, and displayed a turn-off response toward Cu²⁺ due to formation of Cu²⁺@DCCH-TPD and PET effect. The recognition of Cu²⁺@DCCH-TPD by PPi leads to generation of Cu²⁺@PPi complex, which greatly reduces the amount of Cu²⁺ coordinated with DCCH-TPD, subsequently decreasing PET effect. Significantly enhanced fluorescence is recorded and the fluorescence intensity is closely relied on PPi concentration. Thus, highly sensitive detection of PPi is achieved, and the detection limit was calculated to be 0.075 μM. Furthermore, the proposed sensor presented good selectivity, and excellent practical ability for application in arthritic fluid.

PEGylation of Guanidinium and Indole Bearing Poly(methacrylamide)s - Biocompatible Terpolymers for pDNA Delivery

This study describes the first example for shielding of a high performing terpolymer that consists of N-(2-hydroxypropyl)methacrylamide (HPMA), N-(3-guanidinopropyl)methacrylamide (GPMA), and N-(2-indolethyl)methacrylamide monomers (IEMA) by block copolymerization of a polyethylene glycol derivative - poly(nona(ethylene glycol)methyl ether methacrylate) (P(MEO₉ MA)) via reversible addition-fragmentation chain transfer (RAFT) polymerization. The molecular weight of P(MEO₉ MA) is varied from 3 to 40 kg mol^-1 while the comonomer content of HPMA, GPMA, and IEMA is kept comparable. The influence of P(MEO₉ MA) block with various molecular weights is investigated over cytotoxicity, plasmid DNA (pDNA) binding, and transfection efficiency of the resulting polyplexes. Overall, the increase in molecular weight of P(MEO₉ MA) block demonstrates excellent biocompatibility with higher cell viability in L-929 cells and an efficient binding to pDNA at N/P ratio of 2. The significant transfection efficiency in CHO-K1 cells at N/P ratio 20 is obtained for block copolymers with molecular weight of P(MEO₉ MA) up to 10 kg mol^-1 . Moreover, a fluorescently labeled analogue of P(MEO₉ MA), bearing perylene monoimide methacrylamide (PMIM), is introduced as a comonomer in RAFT polymerization. Polyplexes consisting of labeled block copolymer with 20 kg mol^-1 of P(MEO₉ MA) and pDNA are incubated in Hela cells and investigated through structured illumination microscopy (SIM).

Characterization of a fast response fiber-optic pH sensor and illustration in a biological application

Optical, and especially fiber-optic techniques for the sensing of pH have become very attractive and considerable research progress in this field has been made over recent years. The determination of the value of pH across a broad range of applications today, important for areas of study such as life sciences, environmental monitoring, manufacturing industry and widely in biological research is now accessible from such optical sensors. The need for such technology arises because familiar, commercial sensors are often limited in terms of their response time and the presence of drift, all of which emphasize the value of newer and rapidly developing technologies such as fiber-optic sensors, to address these wider applications. As a result, a new compact sensor design has been developed, designed around a specially-formed fiber-optic tip, coated with a pH-sensitive dye, and importantly covalently linked to a hydrogel matrix to provide high stability. The sensor developed was designed to have a very fast response time (to 90% of saturation, Δt₉₀) of <5 s and a sensing uncertainty of ∼±0.04 pH units. Given the covalently bonded nature of the dye, the problem of leaching of the indicator dye is reduced, creating a probe which has been shown to be very stable over many days of use. Illustrating this through extended continuous use, over ∼12 h at pH 7, this stability was confirmed showing a drift of <0.05 pH h^-1. In order to give an illustration of the value of the probe in an important biological application, the monitoring of pH levels between pH 7 to pH 8 in an AMES' medium, a substance which is important to maintain the metabolism of retinal cells is shown and the results as well as temperature stability of the probe discussed.

Construction of cyclopentane-fused coumarins via DBU-catalyzed [3+2] cycloaddition of 3-homoacyl coumarins with cyclic 1-azadienes

The metal-free DBU catalyzed [3+2] cycloaddition of 3-homoacyl coumarins with cyclic 1-azadienes proceeded smoothly to furnish the corresponding highly functionalized cyclopentane-fused coumarins with excellent diastereoselectivity and complete chemoselectivity and in good yields under mild conditions.

A metal-free DBU catalyzed [3+2] cycloaddition of 3-homoacyl coumarins with cyclic 1-azadienes has been developed for the synthesis of cyclopentane-fused coumarins with excellent diastereoselectivity and complete chemoselectivity.

Synthesis, Thermal and Optical Characterizations of New Lateral Organic Systems

New laterally OCH3-substituted optical organic Schiff base/ester series, namely 4-(4-(hexyloxyphenyl)iminomethyl)-3-methoxyphenyl 4-alkoxybenzoates, were prepared and characterized with different thermal, mesomorphic, and photoactive techniques. The prepared group constitutes five homologues that differ from each other in the number of carbons in the terminal alkoxy chain (n), which varies between n = 6, 8, 10, 12, and 16 carbons. The laterally protruded methoxy group is attached to the central benzene ring that makes an angle of 120° with the molecular long axis. Molecular structures of all newly prepared homologues were fully elucidated via FT-IR, 1H and 13C NMR spectroscopy. Mesomorphic transitions were determined via differential scanning calorimetry (DSC) and the phases identified by polarized optical microscopy (POM). Independent of the length of the terminal alkoxy chain attached to phenyl ester ring, only a monomorphic nematic (N) phase was observed for all the synthesized compounds. A comparative study was made between the present lateral methoxy-substituted homologues and their corresponding laterally-neat analogues. The results revealed that, depending on the length of the alkoxy chain and the presence or absence of the lateral methoxy group, different mesophases with different thermal stability and temperature ranges were observed. Finally, UV-vis spectra showed that the present nematogenic series possess photoactive properties that are of importance for many applications.

STED nanoscopy - A novel way to image the pore space of geological materials

STED nanoscopy (Stimulated Emission Depletion). which can resolve details far below the diffraction barrier has been applied hitherto preferentially to life sciences. The method is however also ideal for the investigation of geological matrices containing transparent minerals, an application tested here, to our knowledge, for the first time. The measurements on altered granitic rock and sedimentary clay rock, both containing very fine-grained phases, were conducted successfully. The STED fluorophore was dissolved in C-14-labelled methylmethacrylate (C-14-MMA) monomer which was polymerised within the rock matrix, thereby labelling the pore space in the geomaterials. Double labelling provided by the C-14-labelled MMA enables autoradiography and scanning electron microscopy (SEM), providing necessary complementary information for characterisation and quantification of porosity distributions and mineral and structure identification. Promising perspectives for further investigations of geological matrices by using different fluorophores and the optimisation of measuring procedures or even higher resolution are discussed. The combination of these different methods enlarges the observation scale of porosity from nanometre to centimetre scale.

Fluorescent labeling of biocompatible block copolymers: synthetic strategies and applications in bioimaging

Among biocompatible materials, block copolymers (BCPs) possess several advantages due to the control of their chemistry and the possibility of combining various blocks with defined properties. Consequently, BCPs drew considerable attention as biocompatible materials in the fields of drug delivery, medicine and bioimaging. Fluorescent labeling of BCPs quickly appeared to be a method of choice to image and track these materials in order to better understand the nature of their interactions with biological media. However, incorporating fluorescent markers (FM) into BCPs can appear tricky; we thus intend to help chemists in this endeavor by reviewing recent advances made in the last 10 years. With the choice of the FM being of prior importance, we first reviewed their photophysical properties and functionalities for optimal labeling and imaging. In the second part the different chemical approaches that have been used in the literature to fluorescently label BCPs have been reviewed. We also report and discuss relevant applications of fluorescent BCPs in bioimaging.

Supramolecular hydrogels prepared from fluorescent alkyl pyridinium acrylamide monomers and CB[8]

Facile synthetic methodology unlocks alkyl pyridinium acrylamide monomers for use in the construction of cucurbit[8]uril mediated dynamic, fluorescent hydrogels.

Green light-emitting BSA-conjugated dye supported silica nanoparticles for bio-imaging applications

BSA conjugated with amine functionalised silica nanoparticles (BSA@DSFN) proved to be an ideal material for long life fluorescent probe for cellular imaging application.

One-shot synthesis of star gradient copolymers with controllable graft density

One-shot synthesis of star gradient copolymers with controllable graft density via ring-opening metathesis polymerization.

Luminescent and Robust Perovskite-Silicone Elastomers Prepared by Light Induced Thiol-Ene Reaction

The preparation of a series of luminescent perovskite-silicone elastomer (PSE) composites by embedding inorganic lead halide perovskite nanocrystals (CsPbBr₃ NCs) into networks constructed by trimethylolpropane tris(2-mercaptoacetate) and sulfone-containing silicone copolymers with vinyl side groups (PSMVS) is reported herein. The networks are obtained by an environmentally friendly thiol-ene cross-linking reaction under 30 W household LED light. The conducted analysis shows that the prepared PSEs display strong green fluorescence due to encapsulation of CsPbBr₃ NCs, which constitute a luminescent center in sulfone-containing silicone networks. Using PSMVS as basic polymers instead of commercial polysiloxanes endows PSEs with enhanced mechanical strength and excellent luminescent stability at high temperatures. The PSEs show robust tensile stress and >650% elongation. Additionally, the construction of colorful ultraviolet light-emitting diodes (UV-LEDs) by an in situ cross-linking process is described.

Synthesis and Fluorescent Thermoresponsive Properties of Tetraphenylethylene-Labeled Methylcellulose

Functional polymer, especially the one based on renewable and sustainable materials, has attracted increasing attention to satisfy the growing demand for the design of stimuli-responsive devices. Methylcellulose (MC) is a water-soluble derivative of cellulose, which has been widely used in many fields for its biocompatibility and biological inertness. In this work, MC is labeled by tetraphenylethylene (TPE) via azide-alkyne click reaction to obtain a fluorescent cellulose-based derivative of MC-TPE. The degree of substitution of MC-TPE is determined to be 0.074, which can be self-assembled into micelles in water with the size of 42 ± 6 nm. MC-TPE shows thermoresponsivity and thermoreversibility in size, transmittance, and fluorescence, enabling it to work as a fluorescent thermosensor. Moreover, MC-TPE exhibits nontoxicity and biocompatibility, allowing its application in MCF-7 cell imaging. Therefore, this newly functional natural polymer shows promising potentials in the fields of sensing and bioimaging.

Fluorescent Copolymers for Bacterial Bioimaging and Viability Detection

Novel fluorescent labels with high photostability and high biocompatibility are required for microbiological imaging and detection. Here, we present a green fluorescent polymer chain (GFPC), designed to be nontoxic and water-soluble, for multicolor bioimaging and real-time bacterial viability determination. The copolymer is synthesized using a straightforward one-pot reversible addition-fragmentation chain-transfer (RAFT) polymerization technique. We show that GFPC does not influence bacterial growth and is stable for several hours in a complex growth medium and in the presence of bacteria. GFPC allows the labeling of the bacterial cytoplasm for multicolor bacterial bioimaging applications. It can be used in combination with propidium iodide (PI) to develop a rapid and reliable protocol to distinguish and quantify, in real time, by flow cytometry, live and dead bacteria.

Organocatalytic 1,4-Addition of Azadienes with 3-Homoacyl Coumarins toward Highly Enantioenriched Benzofuran Coumarin Skeletons

A highly enantioselective 1,4-addition reaction of azadiene with 3-homoacyl coumarin has been accomplished by low amounts of bifunctional cinchona alkaloid catalysis under mild conditions. Varieties of benzofuran coumarin skeletons were obtained in moderate to high yields (up to 99%) with excellent enantioselectivities (up to 99% ee) and complete diastereoselectivity.

Functional Polymers and Polymer-Dye Composites for Food Sensing

The sensitive, safe, and portable detection of food spoilage is becoming unprecedentedly important because it is closely related to the public health and economic development, particularly given the globalization of food supply chain. However, the existing approaches for food monitoring are still limited to meet these requirements. To address this challenge, much research has been done to develop an ideal food sensor that can indicate food quality in real-time in a sensitive and reliable way. So far, many sensors such as time-temperature indicators, smart trademarks, colorimetric tags, electronic noses, and electronic tongues, have been developed and even commercialized. In this feature article, the recent progress of food sensors based on functional polymers, including the molecular design of polymer structures, sensing mechanisms, and relevant processing techniques to fabricate a variety of food sensor devices is reviewed.

Detection of anabolic steroids via cyclodextrin-promoted fluorescence modulation

Reported herein is the detection of anabolic steroids through the use of cyclodextrin-promoted interactions between the analyte of interest and a high quantum yield fluorophore, which lead to measurable, analyte-specific changes in the fluorophore emission signal. By using a variety of β-cyclodextrin derivatives (unmodified β-cyclodextrin, methyl-β-cyclodextrin, and 2-hydroxypropyl-β-cyclodextrin) in combination with high quantum yield fluorophore rhodamine 6G, we detected five anabolic steroid analytes with 100% differentiation between structurally similar analytes and micromolar level limits of detection. Overall, these results show significant potential in the development of practical, fluorescence-based steroid detection devices.

Homogeneous Distribution of Polymerizable Coumarin Dyes for Active Few Mode POF

For most kinds of active polymer optical fibers, a homogeneous distribution of dye molecules over the entire fiber length and cross section is required. In this study, chemical bonding of dyes to poly(methyl methacrylate) (PMMA) by copolymerization is achieved within the polymerization process instead of dissolving the dyes in the monomers. In combination with an improved fabrication mechanism, this leads to homogeneous dye distribution within the preforms. A method for proving the integration of the dyes into the polymer chains has been developed using high-performance liquid chromatography (HPLC) and size exclusion chromatography (SEC). Prestructured core-cladding preforms with dye-doped poly(cylohexyl methacrylate-co-methyl methacrylate)-core have been prepared with the Teflon string technique and were heat-drawn to few mode fibers.

AIE-active micelles formed by self-assembly of an amphiphilic platinum complex possessing isoxazole moieties

We report a luminescent micelle that is prepared through the self-assembly of an amphiphilic, neutral Pt(ii) complex with isoxazole moieties in THF/water on account of its aggregation-induced emission (AIE) property.

Aqueous solubilization of hydrophobic tetrapyrrole macrocycles by attachment to an amphiphilic single-chain nanoparticle (SCNP)

Snapping a heterotelechelic amphiphilic polymer onto a tetrapyrrole imparts aqueous solubility to the otherwise hydrophobic macrocycle as demonstrated for a chlorin, bacteriochlorin and phthalocyanine.

Supramolecular behaviour and fluorescence of rhodamine-functionalised ROMP polymers

A ROMP platform leading to rhodamine B containing amphiphilic block copolymers, which self-assemble into micelles which are able to sequester molecular dyes and interact with them by energy transfer. The polymer micelles do not interact with DNA.