Gemini Surfactant-Induced Cysteine-Capped Copper Nanoclusters Self-Assembly with Enhanced Peroxidase-Like Activity and Colorimetric Glutathione Sensing

We have prepared a novel assembly with copper nanoclusters (CuNCs) and imidazolium-based gemini surfactants (different chain lengths). These novel mimic enzymes formed through the assembly of nanocluster-gemini surfactants have been utilized in creating colorimetric sensors to detect biomolecules. Yet, understanding the method for detecting glutathione (GSH) and its sensing mechanism using this specific assembly-based colorimetric sensor poses a significant challenge. Because of the role of surface ligands, the complexes of cysteine-capped CuNCs (Cys-CuNCs) and gemini surfactants exhibit strong amphiphilicity, enabling them to self-assemble like a molecular amphiphile. We have investigated the kinetics and catalytic capabilities of this Cys-CuNCs@gemini surfactant assembly through peroxidase-like activity. Additionally, a sensitive and simple-to-use colorimetric sensing approach for glutathione (GSH) is also disclosed here, demonstrating a low limit of detection, by using this peroxidase-like activity of Cys-CuNCs@gemini surfactant assemblies. Thus, the remarkable advantages of the Cys-CuNCs@gemini surfactant nanozyme make it suitable for the precise colorimetric detection of GSH, demonstrating excellent sensitivity and reliable selectivity. Additionally, it performs well in detecting GSH in various soft drinks.

Increasing Dimensionality in Self-Assembly: Toward Two-Dimensional Supramolecular Polymers

Different approaches to achieve 2D supramolecular polymers, as an alternative to the covalent bottom-up approaches reported for the preparation of 2D materials, are reviewed. The significance of the operation of weak non-covalent forces to induce a lateral growth of a number of self-assembling units is collected. The examples of both thermodynamically and kinetically controlled formation of 2D supramolecular polymers showed in this review demonstrate the utility of this strategy to achieve new 2D materials with biased morphologies (nanosheets, scrolls, porous surfaces) and showing elegant applications like chiral recognition, enantioselective uptake or asymmetric organic transformations. Furthermore, elaborated techniques like seeded or living supramolecular polymerizations have been demonstrated to give rise to complex 2D nanostructures.

Nanoengineered Silica-Based Biomaterials for Regenerative Medicine

The paradigm of regenerative medicine is undergoing a transformative shift with the emergence of nanoengineered silica-based biomaterials. Their unique confluence of biocompatibility, precisely tunable porosity, and the ability to modulate cellular behavior at the molecular level makes them highly desirable for diverse tissue repair and regeneration applications. Advancements in nanoengineered silica synthesis and functionalization techniques have yielded a new generation of versatile biomaterials with tailored functionalities for targeted drug delivery, biomimetic scaffolds, and integration with stem cell therapy. These functionalities hold the potential to optimize therapeutic efficacy, promote enhanced regeneration, and modulate stem cell behavior for improved regenerative outcomes. Furthermore, the unique properties of silica facilitate non-invasive diagnostics and treatment monitoring through advanced biomedical imaging techniques, enabling a more holistic approach to regenerative medicine. This review comprehensively examines the utilization of nanoengineered silica biomaterials for diverse applications in regenerative medicine. By critically appraising the fabrication and design strategies that govern engineered silica biomaterials, this review underscores their groundbreaking potential to bridge the gap between the vision of regenerative medicine and clinical reality.

Research Progress in Structure Synthesis, Properties, and Applications of Small-Molecule Silicone Surfactants

Silicone surfactants have garnered significant research attention owing to their superior properties, such as wettability, ductility, and permeability. Small-molecular silicone surfactants with simple molecular structures outperform polymeric silicone surfactants in terms of surface activity, emulsification, wetting, foaming, and other areas. Moreover, silicone surfactants with small molecules exhibit a diverse and rich molecular structure. This review discusses various synthetic routes for the synthesis of different classes of surfactants, including single-chain, "umbrella" structure, double chain, bolaform, Gemini, and stimulus-responsive surfactants. The fundamental surface/interface properties of the synthesized surfactants are also highlighted. Additionally, these surfactants have demonstrated enormous potential in agricultural synergism, drug delivery, mineral flotation, enhanced oil recovery, separation, and extraction, and foam fire-fighting.

Macronutrient and PFOS bioavailability manipulated by aeration-driven rhizospheric organic nanocapsular assembly

Ubiquitous presence of the extremely persistent pollutants, per- and polyfluoroalkyl substances, is drawing ever-increasing concerns for their high eco-environmental risks which, however, are insufficiently considered based on the assembly characteristics of those amphiphilic molecules in environment. This study investigated the re-organization and self-assembly of perfluorooctane sulfonate (PFOS) and macronutrient molecules from rhizospheric organic (RhO) matter induced with a common operation of aeration. Atomic force microscopy (AFM) with infrared spectroscopy (IR)-mapping clearly showed that, after aeration and stabilization, RhO nanocapsules (∼ 1000 nm or smaller) with a core of PFOS-protein complexes coated by "lipid-carbohydrate" layers were observed whereas the capsule structure with a lipid core surrounded by "protein-carbohydrate-protein" multilayers was obtained in the absence of PFOS. It is aeration that exerted the disassociation of pristine RhO components, after which the environmental concentration PFOS restructured the self-assembly structure in a conspicuous "disorder-to-order" transition. AFM IR-mapping analysis of faeces combined with quantification of component uptake denoted the decreased ingestion and utilization of both PFOS and proteins compared with lipids and carbohydrates when Daphnia magna were fed with RhO nanocapsules. RhO nanocapsules acted as double-edged swords via simultaneously impeding the bioaccessibility of hazardous PFOS molecules and macronutrient proteins; and the latter might be more significant, which caused a malnutrition status within merely 48 h. Elucidating the assembly structure of natural organic matter and environmental concentration PFOS, the finding of this work could be a crucial supplementation to the high-dose-dependent eco-effect investigations on PFOS.

Amphiphilic Low-Molecular-Weight Gelators Bearing β-S-N-Acetylglucosamine Linked to a Tartaric Acid Scaffold: Synthesis, Self-Assembly and Wheat Germ Agglutinin Binding

The self-assembly of carbohydrate-based amphiphiles can lead to colloidal soft materials such as supramolecular gels featuring highly desirable characteristics like biodegradability and biocompatibility. The report herein presents the synthesis, characterization and supramolecular self-assembly, physical gelation and wheat lectin binding of two structurally related amphiphilic compounds having β-S-N-acetylglucosamine residues linked to a 2,3-diacyl-N,N'-dipropargylated-l-tartaric diamide. A 1-thio-β-N-acetyl-d-glucosamine precursor attached to a conveniently functionalized linker with an azido group was synthesized by means of a one-pot procedure followed by deprotection. A click reaction successfully led to the two amphiphiles, which differed in length of the fatty acid attached to the tartaric acid scaffold. Although both compounds are poorly soluble in water and organic solvents, the difference in terms of hydrophilic moieties provided them with distinct supramolecular gelation properties. While the presence of an octadecyl chain produced a hydrogelator, the dodecadecyl homologue would only form weak gels in DMSO. SEM and rheology experiments confirmed the characteristic fibrillar morphology and viscoelastic properties, in agreement with the presence of physical gels. Both amphiphiles were able to interact reversibly with wheat germ agglutinin (WGA), a lectin that specifically recognizes GlcNAc residues, indicating a potential use in the food industry, as a gluten sensitivity manager, as well as in health-related industries, for example, for drug delivery systems.

Chirality-Selected Coacervate by Chiral Gemini Surfactant

Chiral surfactants present opportunities to self-assemble into supramolecules with a chiral trait; however, the effects of stereochemistry on the formation of simple coacervates remain unclear. Here, we investigate the chirality-selected phase behavior in mixtures of chiral gemini surfactant 1,4-bis(dodecyl-N,N-dimethylammonium bromide)-2,3-butanediol (12-4(OH)2-12) with an oppositely charged chiral mandelic acid (MA). It demonstrates that altering the chirality of surfactants yields a heightened ability to regulate the phase behavior, leading to the formation of three different network-like structures, i.e., wormlike micelle, coacervate, and hydrogel, in the racemate, enantiomer, and mesomer, respectively. The different aggregate structures arise from the intermolecular and intramolecular hydrogen-bond interactions of the two hydroxyl groups located at stereogenic centers. Intriguingly, although they contain similar microstructures, the solid-like hydrogel and liquid-like wormlike micelle show similar low hydration ability and have no encapsulation capability, whereas only coacervate formed by the enantiomers of 12-4(OH)2-12 displays liquid-like characteristics, strong capacity to sequester diverse solutes, and high affinity for tightly bound water simultaneously. These findings further highlight the unique and advantageous properties of coacervates as a promising model for exploring the biological process and understanding how chirality plays a crucial role in early life scenarios and cell evolution at the molecular level.

Chiral Mesostructured Inorganic Materials with Optical Chiral Response

Fabricating chiral inorganic materials and revealing their unique quantum confinement-determined optical chiral responses are crucial tasks in the multidisciplinary fields of chemistry, physics, and biology. The field of chiral mesostructured inorganic materials started from the synthesis of individual nanocrystals and evolved to include their assembly from metals, semiconductors, ceramics, and inorganic salts endowed with various chiral structures ranging from atomic to micron scales. This tutorial review highlights the recent research on chiral mesostructured inorganic materials, especially the novel expression of mesostructured chirality and endowed optical chiral response, and it may inspire us with new strategies for the design of chiral inorganic materials and new opportunities beyond the traditional applications of chirality. Fabrication methods for chiral mesostructured inorganic materials are classified according to chirality type, scale, and symmetry-breaking mechanism. Special attention is given to highlight systems with original discoveries, exceptional phenomena, or unique mechanisms of optical chiral response for left- and right-handedness.

Compact Hole-Selective Self-Assembled Monolayers Enabled by Disassembling Micelles in Solution for Efficient Perovskite Solar Cells

Self-assembled monolayers (SAMs) are widely employed as effective hole-selective layers (HSLs) in inverted perovskite solar cells (PSCs). However, most SAM molecules are amphiphilic in nature and tend to form micelles in the commonly used alcoholic processing solvents. This introduces an extra energetic barrier to disassemble the micelles during the binding of SAM molecules on the substrate surface, limiting the formation of a compact SAM. To alleviate this problem for achieving optimal SAM growth, a co-solvent strategy to disassemble the micelles of carbazole-based SAM molecules in the processing solution is developed. This effectively increases the critical micelle concentration to be above the processing concentration and enhances the reactivity of the phosphonic acid anchoring group to allow densely packed SAMs to be formed on indium tin oxide. Consequently, the PSCs derived from using MeO-2PACz, 2PACz, and CbzNaph SAM HSLs show universally improved performance, with the CbzNaph SAM-derived device achieving a champion efficiency of 24.98% and improved stability.

A hierarchical spatial assembly approach of silica-polymer composites leads to versatile silica/carbon nanoparticles

Assembly of silica and polymer in the absence of surfactant templates is an emerging strategy to construct intricate nanostructures, whereas the underlying mechanism and structural versatility remain largely unexplored. We report a hierarchical spatial assembly strategy of silica-polymer composites to produce silica and carbon nanoparticles with unprecedented structures. The assembly hierarchy involves a higher length scale asymmetric A-B-A core-shell-type spatial assembly in a composite sphere, and a nanoscale assembly in the middle layer B in which the silica/polymer ratio governs the assembled structures of silica nanodomains. Through an in-depth understanding of the hierarchical spatial assembly mechanism, a series of silica and carbon nanoparticles with intriguing and controllable architectures are obtained that cannot be easily achieved via conventional surfactant-templating approaches. This work opens an avenue toward the designed synthesis of nanoparticles with precisely regulated structures.

Self-assembled renewable nano-sized pentacyclic triterpenoid maslinic acids in aqueous medium for anti-leukemic, antibacterial and biocompatibility studies: An insight into targeted proteins-compound interactions based mechanistic pathway prediction through molecular docking

Maslinic acid is a naturally occurring dihydroxy, mono-carboxy bioactive triterpenoid. Its bulky structure was the main hindrance in the path of biological activity. Sodium and potassium salts of nano-sized triterpenoid maslinic acid were prepared from maslinic acid and its self-assembly property was studied in aqueous and aqueous-organic binary liquid mixtures. Morphology of the compounds studied by Field Emission Scanning Electron Microscopy (FESEM), Atomic Force Microscopy (AFM), High Resolution Transmission Electron Microscopy (HRTEM), Optical Microscopy, Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) revealed vesicular morphology of the self-assemblies. Selective cytotoxicity was performed in leukemic (K-562 and KG-1a) and PBMC cells. Among the three self-assemblies (maslinic acid 1, sodium maslinate 2 and potassium maslinate 3), sodium maslinate 2 showed better antileukemic efficacy. Sodium maslinate 2 induced apoptosis in leukemic cells by elevating ROS levels and disrupting the cellular antioxidant system. From the in-silico studies, it was confirmed that 2 interacted with extrinsic and intrinsic apoptotic proteins of leukemic cells and killed those cells by inducing apoptotic pathways. The compounds 1, 2 and 3 showed significant antibacterial efficacy against E.coli strain through binding with several periplasmic membrane fusion protein (MFP) and limiting the efflux system leading to arrestation of antimicrobial resistance.

Unification of medicines and excipients: The roles of natural excipients for promoting drug delivery

INTRODUCTION

Drug delivery systems (DDSs) formed by natural active compounds be instrumental in developing new green excipients and novel DDS from natural active compounds (NACs). 'Unification of medicines and excipients'(UME), the special inherent nature of the natural active compounds, provides the inspiration and conduction to achieve this goal.

AREAS COVERED

This review summarizes the typical types of NACs from herbal medicine, such as saponins, flavonoids, polysaccharides, etc. that act as excipients and their main application in DDS. The comparison of the drug delivery systems formed by NACs and common materials and the primary formation mechanisms of these NACs are also introduced to provide a deepened understanding of their performance in DDS.

EXPERT OPINION

Many natural bioactive compounds, such as saponins, polysaccharides, etc. have been used in DDS. Diversity of structure and pharmacological effects of NACs turn out the unique advantages in improving the performance of DDSs like targeting ability, adhesion, encapsulation efficiency(EE), etc. and enhancing the bioavailability of loaded drugs.

A Novel Surfactant with Short Hydrophobic Head and Long Hydrophilic Tail Generates Vesicles with Unique Structural Feature

Surfactant molecules typically have a long hydrophobic tail and a short hydrophilic head group. It remains unexplored if surfactants can have a short hydrophobic head group and a long hydrophilic tail. Designing such surfactants is a challenge as a lengthy hydrophilic tail would completely solubilize the molecules. In this context, herein, the Fmoc-functionalized Gly-Pro-Hyp (GPO) tripeptide repeat-based molecule (Fm-GPO) with fluorenyl moiety as a short hydrophobic head and peptide as a long hydrophilic tail is demonstrated as a reverse surfactant at physiological pH, for the first time. π-π stacking of the fluorenyl moieties and intermolecular hydrogen bonding between the peptide chains with extended polyproline-II structure promoted the self-assembly into spherical vesicles with a unique feature of a large hydrophilic area in the interior and exterior of the bilayer. The current Fm-GPO system offers a new class of surfactants with unique features that can aid in the design of drug-loaded vehicles, which can be target-specific as the peptide chain can be manipulated with different functional ultra-short peptide sequences.

Refined definition of the critical micelle concentration and application to alkyl maltosides used in membrane protein research

The critical micelle concentration (CMC) of nonionic detergents is defined as the breaking point in the monomer concentration as a function of the total detergent concentration, identified by setting the third derivate of this function to zero. Combined with a mass action model for micelle formation, this definition yields analytic formulae for the concentration ratio of monomers to total detergent at the CMC and the relationship between the CMC and the free energy of micellization g mic. The theoretical breaking point is shown to coincide with the breaking point of the experimental titration curve, if the fluorescence enhancement of 8-anilino-1-naphthalene-sulfonic acid (ANS) or a similar probe dye is used to monitor micelle formation. Application to a series of n-alkyl-β-d-maltosides with the number of carbon atoms in the alkyl chain ranging from 8 to 12 demonstrates the good performance of a molecular thermodynamic model, in which the free energy of micellization is given by g mic = σΦ + g pack + g st. In this model, σ is a fit parameter with the dimension of surface tension, Φ represents the change in area of hydrophobic molecular surfaces in contact with the aqueous phase, and g pack and g st are contributions, respectively, from alkyl chain packing in the micelle interior and steric repulsion of detergent head groups. The analysis of experimental data from different sources shows that varying experimental conditions such as co-solutes in the aqueous phase can be accounted for by adapting only σ, if the co-solutes do not bind to the detergent to an appreciable extent. The model is considered a good compromise between theory and practicability to be applied in the context of in vitro investigations of membrane proteins.

Tuning the Chiral Structures from Self-Assembled Carbohydrate Derivatives

Carbohydrates have been regarded as one of the most ideally suited candidates for chirality study via self-assembly owning to their unique chemical structures, abundance, and sustainability. Much efforts have been devoted to design and synthesize diverse carbohydrate derivatives and self-assemble them into various supermolecular morphologies. Nevertheless, still inadequate attention is paid to deeply and comprehensively understand how the carbohydrate structures and self-assembly approaches affect the final morphologies and properties for future demands. Herein, to fulfill the need, a range of recently published studies relating to the chirality of carbohydrates is reviewed and discussed. Furthermore, to tune the chirality of carbohydrate-based structures on both molecular and superstructural levels via chirality transfer and chirality expression, the designing of the molecules and choosing of the proper approaches for self-assembly are elucidated.

Natural Biopolymers as Smart Coating Materials of Mesoporous Silica Nanoparticles for Drug Delivery

In recent years, the functionalization of mesoporous silica nanoparticles (MSNs) with different types of responsive pore gatekeepers have shown great potential for the formulation of drug delivery systems (DDS) with minimal premature leakage and site-specific controlled release. New nanotechnological approaches have been developed with the objective of utilizing natural biopolymers as smart materials in drug delivery applications. Natural biopolymers are sensitive to various physicochemical and biological stimuli and are endowed with intrinsic biodegradability, biocompatibility, and low immunogenicity. Their use as biocompatible smart coatings has extensively been investigated in the last few years. This review summarizes the MSNs coating procedures with natural polysaccharides and protein-based biopolymers, focusing on their application as responsive materials to endogenous stimuli. Biopolymer-coated MSNs, which conjugate the nanocarrier features of mesoporous silica with the biocompatibility and controlled delivery provided by natural coatings, have shown promising therapeutic outcomes and the potential to emerge as valuable candidates for the selective treatment of various diseases.

Molecular Geometry-Directed Self-Recognition in the Self-Assembly of Giant Amphiphiles

Three sets of polyoxometalate (POM)-based amphiphilic hybrid macromolecules with different rigidity in their organic tails are used as models to understand the effect of molecular rigidity on their possible self-recognition feature during self-assembly processes. Self-recognition is achieved in the mixed solution of two structurally similar, sphere-rigid T-shape-linked oligofluorene(TOF₄ ) rod amphiphiles, with the hydrophilic clusters being Anderson (Anderson-TOF₄ ) and Dawson (Dawson-TOF₄ ), respectively. Anderson-TOF₄ is observed to self-assemble into onion-like multilayer structures and Dawson-TOF₄ forms multilayer vesicles. The self-assembly is controlled by the interdigitation of hydrophobic rods and the counterion-mediated attraction among charged hydrophilic inorganic clusters. When the hydrophobic blocks are less rigid, e.g., partially rigid polystyrene and fully flexible alkyl chains, self-recognition is not observed, attributing to the flexible conformation of hydrophobic molecules in the solvophobic domain. This study reveals that the self-recognition among amphiphiles can be achieved by the geometrical limitation of the supramolecular structure due to the rigidity of solvophobic domains.

A General Strategy for the Synthesis of Hierarchically Ordered Metal-Organic Frameworks with Tunable Macro-, Meso-, and Micro-Pores

Hierarchically ordered porous materials with tailored and inter-connected macro-, meso-, and micro-pores would facilitate the heterogeneous adsorption and catalysis processes for a wide range of applications but remain a challenge for synthetic chemists. Here, a general and efficient strategy for the synthesis of inverse opal metal-organic frameworks (IO MOFs) with a tunable size of macro-, meso-, and micro-pores is reported. The strategy is based on the step-wise template formation, precursor infiltration, solvo-thermal reaction, and chemical etching. As a proof of the general applicability of this strategy, a series of inverse opal zirconium-based MOFs with intrinsic micro- and/or meso-pores, including UiO-66, MOF-808, NU-1200, NU-1000 and PCN-777, and tunable macropores (1 µm, 2 µm, 3 µm, 5 µm, and 10 µm), have been prepared with outstanding yields. These IO MOFs demonstrate significantly enhanced absorption rates and faster initial hydrolysis rates for organophosphorus (OPs) aggregates compared to those of the pristine MOFs. This work paves the way for the further development of hierarchically ordered MOFs for advanced applications.

Determination of the critical micelle concentration of surfactants using fluorescence strategies

The increasing importance of surfactants in various fields has led to growing interest in the comprehensive characterization of surfactants. The critical micelle concentration (CMC), the most fundamental property of surfactants, is a parameter that must be measured. In particular, with the continuous expansion of the molecular structure of surfactants, numerous novel amphiphilic molecules have been developed that are capable of forming ordered aggregates in various solvent systems. Fluorescence spectroscopy, based on the differences in fluorescence intensity and wavelength of the fluorescent probe in the solvent phase and micellar phase, can sensitively detect the CMC of surfactants. This review aims to summarize the various fluorescence methods used to determine the CMC, including aggregation-induced emission (AIE), excimer formation, intramolecular charge transfer (ICT), and other miscellaneous strategies. The difficulties and limitations in the CMC determination process are also described. Further suggestions are provided to guide the existing fluorescence probes and the corresponding fluorescence methods to detect critical aggregation concentrations of amphiphilic molecules.

Small-Molecule-based Supramolecular Plastics Mediated by Liquid-Liquid Phase Separation

Plastics are one of the most widely used polymeric materials. However, they are often undegradable and non-recyclable due to the very stable covalent bonds of macromolecules, causing environmental pollution and health problems. Here, we report that liquid-liquid phase separation (LLPS) could drive the formation of robust, stable, and sustainable plastics using small molecules. The LLPS process could sequester and concentrate solutes, strengthen the non-covalent association between molecules and produce a bulk material whose property was highly related to the encapsulated water amounts. It was a robust plastic with a remarkable Young's modulus of 139.5 MPa when the water content was low while became adhesive and could instantly self-heal with more absorbed water. Finally, responsiveness enabled the material to be highly recyclable. This work allowed us to understand the LLPS at the molecular level and demonstrated that LLPS is a promising approach to exploring eco-friendly supramolecular plastics that are potential substitutes for conventional polymers.

Thermo-sensitive self-assembly of poly(ethylene imine)/(phenylthio) acetic acid ion pair in surfactant solutions

Poly(ethylene imine)/(phenylthio) acetic acid (PEI/PTA) ion pairs exhibited an upper critical solution temperature (UCST) behavior in an aqueous solution and the UCST was higher as the PTA content was more. The UCST of the ion pair decreased with increasing Brij S100 (BS 100, a nonionic surfactant) concentration but increased with increasing cetylpridinium chloride (CPC, a cationic surfactant) and sodium lauroylsarcosinate (SLS, an anionic surfactant) concentration. TEM microscopy demonstrated BS 100 markedly reduced the size of PEI/PTA ion pair self-assembly (IPSAM) whereas CPC and SLS had little effect on the size and the integrity of IPSAM. ¹H NMR spectroscopy showed the hydrophobic interaction among the phenyl groups of PEI/PTA ion pairs took place. It also demonstrated the hydrophobic interaction between BS 100 and PTA and the electrostatic interaction between CPC and PTA and between SLS and PEI occurred. X-ray photoelectron spectroscopy disclosed the PTA of PEI/PTA IPSAM could be readily oxidized by H₂O₂ even at a low concentration (e.g. 0.005%). IPSAM released its payload (i.e. nile red) in a temperature and oxidation-responsive manner. The surfactants (i.e. BS 100, CPC, and SLS) suppressed the thermally triggered release in a different way. The effectiveness of the surfactant to suppress the release was in the order of BS 100 > CPC > SLS. IPSAM released its content more extensively as H₂O₂ (an oxidizing agent) concentration was higher. The ionic surfactants (i.e. CPS and SLS) had little effect on the oxidation-induced release degree but the nonionic surfactant (BS 100) markedly suppressed the release degree.

Engineering mesoporous silica nanoparticles for drug delivery: where are we after two decades?

The present review details a chronological description of the events that took place during the development of mesoporous materials, their different synthetic routes and their use as drug delivery systems. The outstanding textural properties of these materials quickly inspired their translation to the nanoscale dimension leading to mesoporous silica nanoparticles (MSNs). The different aspects of introducing pharmaceutical agents into the pores of these nanocarriers, together with their possible biodistribution and clearance routes, would be described here. The development of smart nanocarriers that are able to release a high local concentration of the therapeutic cargo on-demand after the application of certain stimuli would be reviewed here, together with their ability to deliver the therapeutic cargo to precise locations in the body. The huge progress in the design and development of MSNs for biomedical applications, including the potential treatment of different diseases, during the last 20 years will be collated here, together with the required work that still needs to be done to achieve the clinical translation of these materials. This review was conceived to stand out from past reports since it aims to tell the story of the development of mesoporous materials and their use as drug delivery systems by some of the story makers, who could be considered to be among the pioneers in this area.

Synthesis and characterisation of carboxy amide-bonded pyridinium Gemini surfactants: influence of the nature of the spacer group and counterions on the aggregation behaviour

A series of novel dimeric pyridinium surfactants has been synthesised and the effects of a semi-flexible p-xylyl spacer and flexible, polyethylene glycol spacers have been studied. The nature of the spacer determines solubility and aggregation behaviour in two- and three-dimensional systems. Some of these insoluble compounds form two-dimensional, rigid-condensed structures at the air–water interface, while others form liquid-analogue monolayers. Whereas the latter compounds become soluble after exchange of the counterions, the former remain insoluble. The aggregation behaviour of Langmuir layers was, inter alia, investigated by Brewster angle microscopy. The micellisation behaviour of diluted aqueous solutions of soluble surfactants was primarily investigated by conductometric measurements and thermodynamic parameters of aggregation have been deduced with respect to the spacer length.

Domain-selective thermal decomposition within supramolecular nanoribbons

Self-assembly of small molecules in water provides a powerful route to nanostructures with pristine molecular organization and small dimensions (<10 nm). Such assemblies represent emerging high surface area nanomaterials, customizable for biomedical and energy applications. However, to exploit self-assembly, the constituent molecules must be sufficiently amphiphilic and satisfy prescribed packing criteria, dramatically limiting the range of surface chemistries achievable. Here, we design supramolecular nanoribbons that contain: (1) inert and stable internal domains, and (2) sacrificial surface groups that are thermally labile, and we demonstrate complete thermal decomposition of the nanoribbon surfaces. After heating, the remainder of each constituent molecule is kinetically trapped, nanoribbon morphology and internal organization are maintained, and the nanoribbons are fully hydrophobic. This approach represents a pathway to form nanostructures that circumvent amphiphilicity and packing parameter constraints and generates structures that are not achievable by self-assembly alone, nor top-down approaches, broadening the utility of molecular nanomaterials for new targets.

Modulating the Excited State Chirality of Dynamic Chemical Reactions in Chiral Micelles

Chirality generation and transfer is not only of critical importance in resolving the origin of biological homochirality, but also is of great significance for exploring the chirality-related functionalities in nanomaterials and supramolecular systems. Although modulating the ground state chirality in chiral nanomaterials has been widely demonstrated, it remains a big challenge to steer the excited state chirality (circularly polarized luminescence, CPL). Herein, we present a kind of chiral spherical micelles constructed by chiral cationic gemini surfactants, whose surfaces and cavities could co-assemble with hydrophilic and hydrophobic emitters concurrently. Subsequently, the hydrophilic and hydrophobic emitters could be endowed with CPL activity in the aqueous phase. Additionally, the cavities of such micelles can be regarded as the powerful chiral confined space, which could effectively modulate the excited state chirality of dynamic chemical reactions, enabling color-adjustable CPL emission.

Perturbation effect of single polar group substitution on the Self-Association of amphiphilic peptide helices

As an important attempt towards creating hierarchical structures more like nature, the peptide is employed as a building block to build supramolecular architectures. An emerging question is whether the molecular mechanism of self-assembly obtained from the small molecule system, e.g., the driving forces of assembly are conventionally regarded as pairwise-additive, can be manifested in the self-association of biologically relevant amphiphilic peptides. A peptide, KRT-R, was derived from the 120-144 segment of keratin 14. The single cation-to-cation substitution with KRT-R at the site of 125 from arginine (R) to either lysine (K) or histidine (H) results in the peptide helices, KRT-K and KRT-H, sharing 96% sequence identity. These KRT-derived peptides possess similarities in the folding structures but exhibit divergent self-assembled structures. KRT-R and KRT-K self-assemble into sheets and fibrils, respectively. Whereas KRT-H associates into heterogeneous structures, including sheets, particles, and branched networks. The intrinsic tyrosine fluorescence spectroscopy measurements with the KRT-derived peptides within a temperature range of 25 °C to 95 °C reveal that the heating-triggered structural transitions of KRT-derived peptides are divergent. The alternation of single cationic residue changes the thermodynamic signature of peptide assemblies upon heating. A chemical denaturation experiment with KRT-derived peptides indicates that the intermolecular interactions that govern the supramolecular architectures formed by peptides are distinct. Overall, our work demonstrates the contribution of the interplay among various noncovalent interactions to supramolecular assembly.

Halogen Bonding Mediated Hierarchical Supramolecular Chirality

As a highly directional force, halogen bonds based on σ-holes have potential to manipulate supramolecular chirality and build functional chiral systems, which however are largely unexplored. In this work, we report the manipulation of supramolecular chirality in hierarchically self-assembled systems via intracomponent halogen bonds. Cholesteryl cyanostilbene conjugates and 1,3,5-trifluoro-2,4,6-triiodobenzene formed a C₃ symmetrical supramolecular complex with ultrahigh binding affinity and binding constants at 10¹¹ order of magnitude. The halogen bonded propeller geometries exhibited inversed chirality as well as chiroptical activity compared to the pristine helically orientated aggregates. Halogen bonds enabled the engineering of nanoarchitectures, affording supercoiled helical structures and highly aligned nanotubes. This work unveils the role of halogen bonds in controlling supramolecular chirality, establishing a protocol to build functional chiroptical materials from species containing σ-holes and halogenated domains.

Self-assembly of binary solutions to complex structures

Self-assembly in natural and synthetic molecular systems can create complex aggregates or materials whose properties and functionalities rise from their internal structure and molecular arrangement. The key microscopic features that control such assemblies remain poorly understood, nevertheless. Using classical density functional theory, we demonstrate how the intrinsic length scales and their interplay in terms of interspecies molecular interactions can be used to tune soft matter self-assembly. We apply our strategy to two different soft binary mixtures to create guidelines for tuning intermolecular interactions that lead to transitions from a fully miscible, liquid-like uniform state to formation of simple and core-shell aggregates and mixed aggregate structures. Furthermore, we demonstrate how the interspecies interactions and system composition can be used to control concentration gradients of component species within these assemblies. The insight generated by this work contributes toward understanding and controlling soft multi-component self-assembly systems. Additionally, our results aid in understanding complex biological assemblies and their function and provide tools to engineer molecular interactions in order to control polymeric and protein-based materials, pharmaceutical formulations, and nanoparticle assemblies.

Self-Assembly of Amphiphilic Copper Nanoclusters Driven by Cationic Surfactants

Amphiphilicity is an excellent physicochemical property, which is yet to be explored from traditional surfactants to nanoparticles. This article shows that the amphiphilicity of copper nanoclusters (CuNCs) can be readily tuned by electrostatic interactions with cationic surfactants and cetyltrimethylammonium cations (CTA⁺) with counterions Br^-, Cl^-, and C₇H₈O₃S^-. Due to the role of surface ligands, the complexes of glutathione-capped CuNCs (GSH-CuNCs) and the surfactants exhibit good amphiphilicity, which enables them to self-assemble like a molecular amphiphile. This could significantly increase the utility of metal nanoclusters in basic and applied research. As the concentration of the surfactant changes, the aggregates change from nanoparticles to network-like structures. After the formation of supramolecular self-assemblies by hydrophobic interactions, the enhancement of fluorescence intensity was observed, which can be ascribed to the suppression of intramolecular vibrations based on aggregation-induced emission (AIE) and combined with the compactness of GSH-CuNCs in self-assemblies. Our study provides a facile way to generate solid fluorescent materials with excellent fluorescence performance, which may find applications in light-emitting diodes (LEDs).

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

Carbohydrate-Derived Metal-Chelator-Triggered Lipids for Liposomal Drug Delivery

Liposomes are versatile three-dimensional, biomaterial-based frameworks that can spatially enclose a variety of organic and inorganic biomaterials for advanced targeted-delivery applications. Implementation of external-stimuli-controlled release of their cargo will significantly augment their wide application for liposomal drug delivery. This paper presents the synthesis of a carbohydrate-derived lipid, capable of changing its conformation depending on the presence of Zn²⁺ : an active state in the presence of Zn²⁺ ions and back to an inactive state in the absence of Zn²⁺ or when exposed to Na₂ EDTA, a metal chelator with high affinity for Zn²⁺ ions. This is the first report of a lipid triggered by the presence of a metal chelator. Total internal reflection fluorescence microscopy and a single-liposome study showed that it indeed was possible for the lipid to be incorporated into the bilayer of stable liposomes that remained leakage-free for the fluorescent cargo of the liposomes. On addition of EDTA to the liposomes, their fluorescent cargo could be released as a result of the membrane-incorporated lipids undergoing a conformational change.

Supramolecular Chirality Transfer toward Chiral Aggregation: Asymmetric Hierarchical Self-Assembly

Self-assembly, as a typical bottom-up strategy for the fabrication of functional materials, has been applied to fabricate chiral materials with subtle chiral nanostructures. The chiral nanostructures exhibit great potential in asymmetric catalysis, chiral sensing, chiral electronics, photonics, and even the realization of several biological functions. According to existing studies, the supramolecular chirality transfer process combined with hierarchical self-assembly plays a vital role in the fabrication of multiscale chiral structures. This progress report focuses on the hierarchical self-assembly of chiral or achiral molecules that aggregate with asymmetric spatial structures such as twisted bands, helices, and superhelices in different environments. Herein, recent studies on the chirality transfer induced self-assembly based on a variety of supramolecular interactions are summarized. In addition, the influence of different environments and the states of systems including solutions, condensed states, gel systems, interfaces on the asymmetric hierarchical self-assembly, and the expression of chirality are explored. Moreover, both the driving forces that facilitate chiral bias and the supramolecular interactions that play an important role in the expression, transfer, and amplification of the chiral sense are correspondingly discussed.

Inverse Evolution of Helicity from the Molecular to the Macroscopic Level Based on N-Terminal Aromatic Amino Acids

Precise control of the emergence of macroscopic helicity with specific handedness is promising in rationally designing chiral nanomaterials, but it is rather challenging. Herein, we present a protocol to address the transmission of helicity at a molecularly resolved level to a macroscopically resolved level, in which process supramolecular chirality undergoes an inversion. A series of N-terminal aromatic amino acids could self-assemble in water, enabling the occurrence of helicity at the molecularly resolved scale, evidenced by the single crystal structure and chiroptical responses. While it failed to transmit the helicity to the macroscopic scale for individual self-assembly, the coassembly with small organic binder through hydrogen bonding interactions allows for the emergence of helical structures at the nano/micrometer scale. Experimental and theoretical results demonstrate that the introduction of extra hydrogen bonds enables a moderate crystallinity of coassemblies with remaining one-dimensional orientation to enhance the helical growth. The transmission of helicity to higher levels by coassembly is accompanied by the helicity inversion, resulting from the exchange of hydrogen bonds. This study presents a rational protocol to precisely control the emergence of macroscopic helicity from molecularly resolved helicity with finely tailored handedness, providing a deeper understanding of the chirality origin in the assembled systems in order to facilitate the design and construction of functional chiral nanomaterials.

Vesicle formation of single-chain amphiphilic 4-dodecylbenzene sulfonic acid in water and micelle-to-vesicle transition induced by wet-dry cycles

Simple single-chain amphiphiles (SCAs) can form vesicular structures in their single-component aqueous solutions, which has attracted great attention, but the understanding of their aggregation behavior is still limited. In this work, the aggregation behavior of 4-dodecylbenzene sulfonic acid (DBSA), a typical simple SCA, in water was investigated. The structure and properties of the aggregates formed were determined. In particular, the effect of wet-dry cycles on the structures of aggregates was examined. The mechanisms of aggregate formation and structural transition were discussed. It was found that the increase of DBSA concentration can drive the occurrence of a micelle-to-vesicle transition, showing a critical micelle concentration and critical vesicle concentration of ∼0.53 and 2.14 mM, respectively. The vesicles formed coexist with micelles in solution, with a unilamellar structure and ∼80 nm size, and exhibit size-selective permeability. In addition, the vesicles show remarkable stability upon long-term storage, exposure to high temperature, and freeze-thaw cycles. The H-bonding interaction between DBSA species and the interdigitated structure of alkyl chains in bilayers play a key role in the formation and stability of DBSA vesicles. Interestingly, it was found that the wet-dry cycle can induce a micelle-to-vesicle transition and an obvious increase in the size of the original vesicles, accompanied by the formation of some multilamellar vesicles. This work provides a better understanding of the aggregation behavior of simple SCAs in their single-component aqueous solutions.

Newer Non-ionic A2 B2 -Type Enzyme-Responsive Amphiphiles for Drug Delivery

A new series of nonionic gemini amphiphiles have been synthesized in a multi-step chemoenzymatic approach by using a novel A₂ B₂ -type central core consisting of conjugating glycerol and propargyl bromide on 5-hydroxy isophthalic acid. A pair of hydrophilic monomethoxy poly(ethylene glycol) (mPEG) and hydrophobic linear alkyl chains (C₁₂ /C₁₅ ) were then added to the core to obtain amphiphilic architectures. The aggregation tendency in aqueous media was studied by dynamic light scattering, fluorescence spectroscopy and cryogenic transmission electron microscopy. The nanotransport potential of the amphiphiles was studied for model hydrophobic guests, that is, the dye Nile Red and the drug Nimodipine by using UV/Vis and fluorescence spectroscopy. Evaluation of the viability of amphiphile-treated A549 cells showed them to be well tolerated up to the concentrations studied. Being ester based, these amphiphiles exhibit stimuli-responsive sensitivity towards esterases, and a rupture of amphiphilic architecture was observed in the presence of immobilized Candida antarctica lipase (Novozym 435), thus facilitating release of the encapsulated guest from the aggregate.

Dendritic Macromolecular Architectures: Dendrimer-Based Polyion Complex Micelles

Polymeric micelles are nanoassemblies that are formed by spontaneous arrangement of amphiphilic block copolymers in aqueous solutions at critical micelle concentration (CMC). They represent an effective system for drug delivery of, for instance, poorly water-soluble anticancer drugs. Then, the development of polyion complexes (PICs) were emphasized. The morphology of these complexes depends on the topology of the polyelectrolytes used and the way they are assembled. For instance, ionic-hydrophilic block copolymers have been used for the preparation of PIC micelles. The main limitation in the use of PIC micelles is their potential instability during the self-assembly/disassembly processes, influenced by several parameters, such as polyelectrolyte concentration, deionization associated with pH, ionic strength due to salt medium effects, mixing ratio, and PIC particle cross-linking. To overcome these issues, the preparation of stable PIC micelles by increasing the rigidity of their dendritic architecture by the introduction of dendrimers and controlling their number within micelle scaffold was highlighted. In this original concise Review, we will describe the preparation, molecular characteristics, and pharmacological profile of these stable nanoassemblies.

Synthesis and self-assembly of amphiphilic precision glycomacromolecules

Amphiphilic precision glycomacromolecules (APG) are synthesized using solid-phase synthesis and studied for their self-assembly behavior and as inhibitors of bacterial adhesion.

Exploring the tubular self-assembly landscape of dinucleobase amphiphiles in water

The tubular aqueous assembly of dinucleobase amphiphilic monomers endowed with anionic, neutral or cationic groups is investigated under diverse conditions.

Connecting primitive phase separation to biotechnology, synthetic biology, and engineering

One aspect of the study of the origins of life focuses on how primitive chemistries assembled into the first cells on Earth and how these primitive cells evolved into modern cells. Membraneless droplets generated from liquid-liquid phase separation (LLPS) are one potential primitive cell-like compartment; current research in origins of life includes study of the structure, function, and evolution of such systems. However, the goal of primitive LLPS research is not simply curiosity or striving to understand one of life's biggest unanswered questions, but also the possibility to discover functions or structures useful for application in the modern day. Many applicational fields, including biotechnology, synthetic biology, and engineering, utilize similar phaseseparated structures to accomplish specific functions afforded by LLPS. Here, we briefly review LLPS applied to primitive compartment research and then present some examples of LLPS applied to biomolecule purification, drug delivery, artificial cell construction, waste and pollution management, and flavor encapsulation. Due to a significant focus on similar functions and structures, there appears to be much for origins of life researchers to learn from those working on LLPS in applicational fields, and vice versa, and we hope that such researchers can start meaningful cross-disciplinary collaborations in the future.

Easy access to a carbohydrate-based template for stimuli-responsive surfactants

In this paper we describe the synthesis of a new carbohydrate-based building block functionalized with azido or amino groups on the 2 and 4 positions. The building block can be synthesized in anomerically pure form in only five scalable steps starting from commercially available levoglucosan. It was shown that the building block could undergo alkylations under strongly basic conditions. The building block with azido groups could furthermore take part in CuAAC reactions, generating derivatives with ester or carboxylic acid functionalities. In addition, the anomeric mixture of the building block was used for the synthesis of a molecule that could act as an emulsifier only in the presence of Zn²⁺ ions.

Non-ionic small amphiphile based nanostructures for biomedical applications

Self-assembly of non-ionic amphiphilic architectures into nanostructures with defined size, shape and morphology has garnered substantial momentum in the recent years due to their extensive applications in biomedicine. The manifestation of a wide range of morphologies such as micelles, vesicles, fibers, tubes, and toroids is thought to be related to the structure of amphiphilic architectures, in particular, the choice of the hydrophilic and hydrophobic parts. In this review, we look at different types of non-ionic small amphiphilic architectures and the factors that influence their self-assembly into various nanostructures in aqueous medium. In particular, we focus on the explored structural parameters that guide the formation of various nanostructures, and the ways these structures can be used in applications ranging from drug delivery to cell imaging.