Influence of external bacterial structures on the efficiency of photodynamic inactivation by a cationic porphyrin

TMPyP-mediated photoinactivation of Pseudomonas aeruginosa improved in the presence of a cationic polymer

Pseudomonas aeruginosa is one of the most refractory organisms to antibiotic treatment and appears to be one of the least susceptible to photodynamic treatment. TMPyP is effective in the photoinactivation of P. aeruginosa, and the co-administration with the cationic polymer Eudragit®-E100 (Eu) potentiates this effect against isolates both sensitive and resistant to antibiotics. The fluorescent population (>98%) observed by flow cytometry after exposure to Eu + TMPyP remained unchanged after successive washings, indicating a stronger interaction/internalization of TMPyP in the bacteria, which could be attributed to the rapid neutralization of surface charges. TMPyP and Eu produced depolarization of the cytoplasmic membrane, which increased when both cationic compounds were combined. Using confocal laser scanning microscopy, heterogeneously distributed fluorescent areas were observed after TMPyP exposure, while homogeneous fluorescence and enhanced intensity were observed with Eu + TMPyP. The polymer caused alterations in the bacterial envelopes that contributed to a deeper and more homogeneous interaction/internalization of TMPyP, leading to a higher probability of damage by cytotoxic ROS and explaining the enhanced result of photodynamic inactivation. Therefore, Eu acts as an adjuvant without being by itself capable of eradicating this pathogen. Moreover, compared with other therapies, this combinatorial strategy with a polymer approved for pharmaceutical applications presents advantages in terms of toxicity risks.

Antimicrobial activity of cationic water-soluble porphyrin against multidrug-resistant bacteria in biofilms and canine skin samples

Multidrug-resistant (MDR) microorganisms pose a threat to animal health, particularly in integumentary diseases, which can be caused by multiple organisms and often manifest as biofilms, hindering treatment effectiveness. We evaluated the antimicrobial activity of antimicrobial photodynamic therapy (aPDT) using a water-soluble tetra-cationic porphyrin (4-H2TMeP) against MDR bacteria cultured in biofilm and in mono and polyculture grown on canine skin samples. We utilized 4-H2TMeP porphyrin against MDR Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus pseudintermedius. A non-cytotoxic concentration of 4-H2TMeP (40 µM), previously shown to be effective in vitro against these bacteria cultured in solution, was employed. Biofilms were treated with 4-H2TMeP and subjected to light irradiation for 30, 60, and 90 min. Monocultures on canine skin samples were treated with 4-H2TMeP and irradiated for 30 (S. pseudintermedius), 60 (E. coli), or 60 and 90 min (P. aeruginosa). Polycultures of S. pseudintermedius and E. coli were treated with light for 60 and 90 min. The efficacy of aPDT was evaluated by plating light-exposed biofilms, mono and polycultures of bacteria obtained from skin samples exposed to light and kept in the dark. Colony-forming units were counted after 24 h of incubation at 37 °C. aPDT using 4-H2TMeP reduced bacterial concentrations of S. pseudintermedius and E. coli biofilms. Additionally, it significantly reduced bacterial concentrations cultivated on skin samples, with a particular emphasis on S. pseudintermedius. These findings indicate that aPDT with 4-H2TMeP is a promising alternative treatment against MDR bacteria in animal skin infections and should be further explored through in vivo research.

Properties of active packaging of PLA-PCL film integrated with chitosan as an antibacterial agent and syzygium cumini seed extract as an antioxidant agent

Active packaging is becoming increasingly significant in the food industry. The present study aims to explore the use of Syzygium Cumini Seed Extract (SCSE) as an antioxidant and chitosan as an antibacterial agent to produce active packaging based on polylactic acid (PLA), poly ε-caprolactone (PCL), and polyethylene glycol (PEG) blend. Using advanced characterization techniques, active packaging (PLA/PCL/PEG) incorporating with 0.5 g chitosan-0.5 mL SCSE was evaluated for its mechanical, physical, structural, and antibacterial-antioxidant properties. The addition of chitosan-SCSE caused an 18.57 % increase in tensile strength and decreased the Water Vapor Transmission Rate (WVTR) by up to 52 %, whereas smooth surface microscopy indicated good compatibility between polymers and active agents. Active packaging incorporating chitosan-SCSE reduced 96.66 % of Gram-positive bacteria Staphylococcus aureus and 73.98 % of Gram-negative bacteria, Escherichia coli. During 15 days of storage, the active packaging was able to slow the increase in Total Volatile Basic Nitrogen (TVBN) in beef and prevent the decrease in vitamin C contents in pineapple.

Cationic Porphyrins as Antimicrobial and Antiviral Agents in Photodynamic Therapy

Antimicrobial photodynamic therapy (APDT) has received a great deal of attention due to its unique ability to kill all currently known classes of microorganisms. To date, infectious diseases caused by bacteria and viruses are one of the main sources of high mortality, mass epidemics and global pandemics among humans. Every year, the emergence of three to four previously unknown species of viruses dangerous to humans is recorded, totaling more than 2/3 of all newly discovered human pathogens. The emergence of bacteria with multidrug resistance leads to the rapid obsolescence of antibiotics and the need to create new types of antibiotics. From this point of view, photodynamic inactivation of viruses and bacteria is of particular interest. This review summarizes the most relevant mechanisms of antiviral and antibacterial action of APDT, molecular targets and correlation between the structure of cationic porphyrins and their photodynamic activity.

Starch-based films doped with porphyrinoid photosensitizers for active skin wound healing

Starch is a biodegradable and biocompatible carbohydrate that, when combined with bioactive molecules, can be processed as biomimetic platforms with enhanced performance, allowing its use as active wound dressing materials. Porphyrinoid photosensitizers can tune the physicochemical/functional profile of biomacromolecules, allowing their use in anti-infective strategies. In this work, the feasibility of using the cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetraiodide (TMPyP) to enhance the physicochemical, mechanical, antimicrobial performance, and wound healing ability of casted starch-based films was studied. TMPyP conferred a reddish coloration to the films, maintaining their pristine transparency. It increased by 87 % the films hydrophobicity and, depending on the TMPyP used, conferred mobility to the starch polymeric chains. Starch/TMPyP-based films effectively photoinactivated Escherichia coli (>99.99 %) and favored the wound healing process, even in the absence of light. Therefore, the incorporation of TMPyP into starch-based formulations revealed to be a promising strategy to tune the films compaction degree while giving rise to water tolerant and photosensitive biomaterials that can act as multitarget antimicrobial medical dressings and glycocarriers of active compounds relevant for effective skin wound healing.

Tuning the Molecular Structure of Corroles to Enhance the Antibacterial Photosensitizing Activity

The increase in the antibiotic resistance of bacteria is a serious threat to public health. Photodynamic inactivation (PDI) of micro-organisms is a reliable antimicrobial therapy to treat a broad spectrum of complex infections. The development of new photosensitizers with suitable properties is a key factor to consider in the optimization of this therapy. In this sense, four corroles were designed to study how the number of cationic centers can influence the efficacy of antibacterial photodynamic treatments. First, 5,10,15-Tris(pentafluorophenyl)corrole (Co) and 5,15-bis(pentafluorophenyl)-10-(4-(trifluoromethyl)phenyl)corrole (Co-CF₃) were synthesized, and then derivatized by nucleophilic aromatic substitution with 2-dimethylaminoethanol and 2-(dimethylamino)ethylamine, obtaining corroles Co-3NMe₂ and Co-CF₃-2NMe₂, respectively. The straightforward synthetic strategy gave rise to macrocycles with different numbers of tertiary amines that can acquire positive charges in an aqueous medium by protonation at physiological pH. Spectroscopic and photodynamic studies demonstrated that their properties as chromophores and photosensitizers were unaffected, regardless of the substituent groups on the periphery. All tetrapyrrolic macrocycles were able to produce reactive oxygen species (ROS) by both photodynamic mechanisms. Uptake experiments, the level of ROS produced in vitro, and PDI treatments mediated by these compounds were assessed against clinical strains: methicillin-resistant Staphylococcus aureus and Klebsiella pneumoniae. In vitro experiments indicated that the peripheral substitution significantly affected the uptake of the photosensitizers by microbes and, consequently, the photoinactivation performance. Co-3NMe₂ was the most effective in killing both Gram-positive and Gram-negative bacteria (inactivation > 99.99%). This work lays the foundations for the development of new corrole derivatives having pH-activable cationic groups and with plausible applications as effective broad-spectrum antimicrobial photosensitizers.

Photophysical and in vitro photoinactivation of Escherichia coli using cationic 5,10,15,20-tetra(pyridin-3-yl) porphyrin and Zn(II) derivative conjugated to graphene quantum dots

Pathogenic microorganisms may continue causing infection through the transfer of antibiotic resistance genes. As a result, the efficacy of pharmaceuticals in microbial inactivation is deteriorating. The present study was conducted to investigate the antimicrobial activity of neutral and quaternized free base and Zn 5,10,15,20-tetra(pyridin-3-yl) porphyrins on Escherichia coli (E. coli), a gram-negative bacterium that causes cholecystitis, pneumonia and urinary tract infections. Conjugation of the porphyrin to graphene quantum dots (GQDs) was implemented to enhance photocatalysis and reactive oxygen species generation. Density functional theory (DFT) geometry optimizations for free base and Zn porphyrin based on the B3LYP (Becke 3-Parameter (Exchange), Lee, Yang and Parr) functional of the Gaussian09 program package and Time-dependent density-functional theory (TD-DFT) calculations of the associated UV-visible absorption spectra are reported to analyse the electronic structure and optical properties of the porphyrins. The TD-DFT calculations showed that for both porphyrins the value of highest occupied molecular orbital (ΔHOMO) is greater than that of lowest unoccupied molecular orbital (ΔLUMO) which tells that there is no unusual splitting of (LUMO) orbitals which may be caused by systematic error in TD-DFT calculations. Due to the red shift in the spectrum of ZnT(3-Py)P and the ΔLUMO being higher, the HOMO-LUMO gap was expected to be lower than that of H₂T(3-Py)P. The photophysical properties and Photodynamic antimicrobial chemotherapy activities of these nanoconjugates were investigated. The highest Φ_Δ was that of Q-ZnT(3-Py)P- GDQs at 0.69 with the log reduction of 9.42.

Development of a Polymeric Film Entrapping Rose Bengal and Iodide Anion for the Light-Induced Generation and Release of Bactericidal Hydrogen Peroxide

A series of poly(2-hydroxyethyl methacrylate) (PHEMA) thin films entrapping photosensitizer Rose Bengal (RB) and tetrabutylammonium iodide (TBAI) have been synthetized. The materials have been characterized by means of Thermogravimetric Analysis (TGA), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and UV-vis Absorption spectroscopy. Irradiation of the materials with white light led to the generation of several bactericidal species, including singlet oxygen (¹O₂), triiodide anion (I₃^-) and hydrogen peroxide (H₂O₂). ¹O₂ production was demonstrated spectroscopically by reaction with the chemical trap 2,2'-(anthracene-9,10-diylbis(methylene))dimalonic acid (ABDA). In addition, the reaction of iodide anion with ¹O₂ yielded I₃^- inside the polymeric matrix. This reaction is accompanied by the formation of H₂O₂, which diffuses out the polymeric matrix. Generation of both I₃^- and H₂O₂ was demonstrated spectroscopically (directly in the case of triiodide by the absorption at 360 nm and indirectly for H₂O₂ using the xylenol orange test). A series of photodynamic inactivation assays were conducted with the synthesized polymers against Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa. Complete eradication (7 log₁₀ CFU/mL) of both bacteria occurred after only 5 min of white light irradiation (400-700 nm; total energy dose 24 J/cm²) of the polymer containing both RB and TBAI. The control polymer without embedded iodide (only RB) showed only marginal reductions of ca. 0.5 log₁₀ CFU/mL. The main novelty of the present investigation is the generation of three bactericidal species (¹O₂, I₃^- and H₂O₂) at the same time using a single polymeric material containing all the elements needed to produce such a bactericidal cocktail, although the most relevant antimicrobial activity is shown by H₂O₂. This experimental approach avoids multistep protocols involving a final step of addition of I^-, as described previously for other assays in solution.

Light-Induced Anti-Bacterial Effect Against Staphylococcus aureus of Porphyrin Covalently Bonded to a Polyethylene Terephthalate Surface

Antimicrobial photodynamic inactivation represents a promising and potentially greener alternative to conventional antimicrobials, and a solution for multidrug-resistant strains. The current study reports the development and characterization of tetra-substituted diazirine porphyrin covalently bonded to polyethylene terephthalate (PET) and its use as an antimicrobial surface. The diazirine moiety on the porphyrin was activated using a temperature of 120 °C, which initiated a C-H insertion mechanism that irreversibly functionalized the PET surface. Activation of the surface with white LED light in phosphate-buffered saline (PBS) led to singlet oxygen generation, which was detected via the degradation of 9,10-anthracenediylbis(methylene)dimalonic acid (ADMA) over time. The bactericidal effect of the ¹O₂-producing surface against Staphylococcus aureus was determined qualitatively and quantitatively. The growth of the pathogen beneath porphyrin-functionalized PET coupons was reduced; moreover, the PET coupons resulted in a 1.76-log reduction in cell counts after exposure to white LED light for 6 h. This is a promising material and platform for the development of safer antimicrobial surfaces, with applications in healthcare, food packaging, marine surfaces, and other surfaces in the environment.

Photodynamic Inactivation of SARS-CoV-2 Infectivity and Antiviral Treatment Effects In Vitro

Despite available vaccines, antibodies and antiviral agents, the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) pandemic still continues to cause severe disease and death. Current treatment options are limited, and emerging new mutations are a challenge. Thus, novel treatments and measures for prevention of viral infections are urgently required. Photodynamic inactivation (PDI) is a potential treatment for infections by a broad variety of critical pathogens, including viruses. We explored the infectiousness of clinical SARS-CoV-2 isolates in Vero cell cultures after PDI-treatment, using the photosensitizer Tetrahydroporphyrin-tetratosylate (THPTS) and near-infrared light. Replication of viral RNA (qPCR), viral cytopathic effects (microscopy) and mitochondrial activity were assessed. PDI of virus suspension with 1 µM THPTS before infection resulted in a reduction of detectable viral RNA by 3 log levels at day 3 and 6 after infection to similar levels as in previously heat-inactivated virions (<99.9%; p < 0.05). Mitochondrial activity, which was significantly reduced by viral infection, was markedly increased by PDI to levels similar to uninfected cell cultures. When applying THPTS-based PDI after infection, a single treatment had a virus load-reducing effect only at a higher concentration (3 µM) and reduced cell viability in terms of PDI-induced toxicity. Repeated PDI with 0.3 µM THPTS every 4 h for 3 d after infection reduced the viral load by more than 99.9% (p < 0.05), while cell viability was maintained. Our data demonstrate that THPTS-based antiviral PDI might constitute a promising approach for inactivation of SARS-CoV-2. Further testing will demonstrate if THPTS is also suitable to reduce the viral load in vivo.

The Meta-Substituted Isomer of TMPyP Enables More Effective Photodynamic Bacterial Inactivation than Para-TMPyP In Vitro

Porphyrinoid-based photodynamic inactivation (PDI) provides a promising approach to treating multidrug-resistant infections. However, available agents for PDI still have optimization potential with regard to effectiveness, toxicology, chemical stability, and solubility. The currently available photosensitizer TMPyP is provided with a para substitution pattern (para-TMPyP) of the pyridinium groups and has been demonstrated to be effective for PDI of multidrug-resistant bacteria. To further improve its properties, we synthetized a structural variant of TMPyP with an isomeric substitution pattern in a meta configuration (meta-TMPyP), confirmed the correct structure by crystallographic analysis and performed a characterization with NMR-, UV/Vis-, and IR spectroscopy, photostability, and singlet oxygen generation assay. Meta-TMPyP had a hypochromic shift in absorbance (4 nm) with a 55% higher extinction coefficient and slightly improved photostability (+6.9%) compared to para-TMPyP. Despite these superior molecular properties, singlet oxygen generation was increased by only 5.4%. In contrast, PDI, based on meta-TMPyP, reduced the density of extended spectrum β-lactamase-producing and fluoroquinolone-resistant Escherichia coli by several orders of magnitude, whereby a sterilizing effect was observed after 48 min of illumination, while para-TMPyP was less effective (p < 0.01). These findings demonstrate that structural modification with meta substitution increases antibacterial properties of TMPyP in PDI.

The Antimicrobial Photoinactivation Effect on Escherichia coli through the Action of Inverted Cationic Porphyrin-Cyclodextrin Conjugates

Photodynamic action has been used for diverse biomedical applications, such as treating a broad range of bacterial infections. Based on the combination of light, dioxygen, and photosensitizer (PS), the photodynamic inactivation (PDI) approach led to the formation of reactive oxygen species (ROS) and represented a non-invasive, non-toxic, repeatable procedure for pathogen photoinactivation. To this end, different tetrapyrrolic macrocycles, such as porphyrin (Por) dyes, have been used as PSs for PDI against microorganisms, mainly bacteria. Still, there is significant room for improvement, especially new PS molecules. Herein, unsymmetrical new pyridinone (3−5) and thiopyridyl Pors (7) were prepared with α-, β-, or γ-cyclodextrin (CD) units, following their quaternization to perform the corresponding free-base Pors (3a−5a and 7a), and were compared with the already-known Pors 6a and 8a, both bearing thiopyridinium and CD units. These water-soluble porphyrins were evaluated as PSs, and their photophysical and photochemical properties and photodynamic effects on E. coli were assessed. The presence of one CD unit and three positive charges on the Por structure (3a−5a and 7a) enhanced their aqueous solubility. The photoactivity of the cationic Pors 3a−5a and 6a−8a ensured their potential against the Gram-negative bacterium E. coli. Within each series of methoxypyridinium vs thiopyridinium dyes, the best PDI efficiency was achieved for 5a with a bacterial viability reduction of 3.5 log10 (50 mW cm−2, 60 min of light irradiation) and for 8a with a total bacterial viability reduction (>8 log10, 25 mW cm−2, 30 min of light irradiation). Here, the presence of the methoxypyridinium units is less effective against E. coli when compared with the thiopyridinium moieties. This study allows for the conclusion that the peripheral charge position, quaternized substituent type/CD unit, and affinity to the outer bacterial structures play an important role in the photoinactivation efficiency of E. coli, evidencing that these features should be further addressed in the pursuit for optimised PS for the antimicrobial PDI of pathogenic microorganisms.

The application of photodynamic inactivation to microorganisms in food

•

Recent progresses in the development of photodynamic inactivation (PDI) of bacteria were summarized.

•

Key factors influencing the PDI effects were firstly reviewed.

•

Photosensitizers which can be applied in food products for PDI are summarized.

•

Application of PDI in various food substrates are also reviewed.

Nowadays, food safety issues have drawn increased attention due to the continual occurrence of infectious diseases caused by foodborne pathogens, which is an important factor causing food safety hazard. Meanwhile, the emergence of an increasing number of antibiotic-resistant pathogens is a worrisome phenomenon. Therefore, it is imperative to find new technologies with low-cost to inactivate pathogenic microorganisms and prevent cross-contamination. Compared with traditional preservatives, photodynamic inactivation (PDI) has emerged as a novel and promising strategy to eliminate foodborne pathogens with advantages such as non-toxic and low microbial resistance, which also meets the demand of current consumers for green treatment. Over the past few years, reports of using this technology for food safety have increased rapidly. This review summarizes recent progresses in the development of photodynamic inactivation of foodborne microorganisms. The mechanisms, factors influencing PDI and the application of different photosensitizers (PSs) in different food substrates are reviewed.

Photodynamic inactivation and its application in food preservation

Food incidents caused by various foodborne pathogenic bacteria are posing a major threat to human health. The traditional thermal and chemical-based procedures applied for microbial control in the food industry cause adverse effects on food quality and bacterial resistance. As a new means of innovative sterilization technology, photodynamic inactivation (PDI) has gained significant attention due to excellent sterilization effect, environmental friendliness, safety, and low cost. This review analyses new developments in recent years for PDI systems applied to the food preservation. The fundamentals of photosensitization mechanism, the development of photosensitizers and light source selection are discussed. The application of PDI in food preservation are presented, with the main emphasis on the natural photosensitizers and its application to inactivate in vitro and in vivo microorganisms in food matrixes such as fresh vegetable, fruits, seafood, and poultry. The challenges and future research directions facing the application of this technology to food systems have been proposed. This review will provide reference for combating microbial contamination in food industry.

Photodynamic Inactivation of Pseudomonas aeruginosa by PHEMA Films Loaded with Rose Bengal: Potentiation Effect of Potassium Iodide

Four formulations have been used to produce different poly(2-hydroxyethyl methacrylate) (PHEMA) thin films, containing singlet oxygen photosensitizer Rose Bengal (RB). The polymers have been characterized employing Thermogravimetric Analysis (TGA), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and UV-vis Absorption Spectroscopy. When irradiated with white light (400-700 nm) films generated singlet oxygen (1O2), as demonstrated by the reactivity with 1O2 trap 9,10-dimethylanthracene (DMA). Material with the highest RB loading (polymer A4, 835 nmol RB/g polymer) was able to perform up to ten cycles of DMA oxygenation reactions at high conversion rates (ca. 90%). Polymer A4 was also able to produce the complete eradication of a Pseudomonas aeruginosa planktonic suspension of 8 log10 CFU/mL, when irradiated with white light (total dose 72 J/cm2). The antimicrobial photodynamic effect was remarkably enhanced by adding potassium iodide (100 mM). In such conditions the complete bacterial reduction occurred with a total light dose of 24 J/cm2. Triiodide anion (I3-) generation was confirmed by UV-vis absorption spectroscopy. This species was detected inside the PHEMA films after irradiation and at concentrations ca. 1 M. The generation of this species and its retention in the matrix imparts long-lasting bactericidal effects to the RB@PHEMA polymeric hydrogels. The polymers here described could find potential applications in the medical context, when optimized for their use in everyday objects, helping to prevent bacterial contagion by contact with surfaces.

Photosensitizer-loaded hydrogels for photodynamic inactivation of multirestistant bacteria in wounds

Photodynamic treatment is a promising tool for the therapy of multidrug-resistant bacteria. In this study, we highlight photosensitizer-loaded hydrogels as an application system for infected wounds. The poly(ethylene glycol) diacrylate-based and electron beam-polymerized hydrogels were mechanically stable and transparent. They were loaded with two photoactive, porphyrin-based drugs - tetrakis(1 methylpyridinium-4-yl)porphyrin p-toluenesulfonate (TMPyP) and tetrahydroporphyrin - p toluenesulfonate (THPTS). The hydrogels released a sufficient amount of the photosensitizers (up to 300 μmol l-1), relevant for efficiency. The antimicrobial effectivity of loaded hydrogels was investigated in a tissue-like system as well as in a liquid system against a multiresistant Escherichia coli. In both systems, light induced eradication was possible. In contrast, hydrogels alone showed only minor antimicrobial activity. Furthermore, the loaded hydrogels were successfully tested against seven multidrug-resistant bacterial strains, namely Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumonia, Acinetobacter baumannii, Pseudomonas aeruginosa, Escherichia coli and Achromobacter xylosoxidans. The eradication of these pathogens, except A. xylosoxidans, was successfully demonstrated. In general, TMPyP-loaded hydrogels were more effective than THPTS-loaded ones. Nevertheless, both photosensitizers displayed effectivity against all investigated bacteria strains. Taken together, our data demonstrate that photosensitizer-loaded hydrogels are a promising new tool to improve the treatment of wounds infected with problematic bacterial pathogens.

Turning Photons into Drugs: Phthalocyanine-Based Photosensitizers as Efficient Photoantimicrobials

One of the most promising alternatives for treating bacterial infections is antimicrobial photodynamic therapy (aPDT), making the synthesis and application of new photoactive compounds called photosensitizers (PS) a dynamic research field. In this regard, phthalocyanine (Pc) derivatives offer great opportunities due to their extraordinary light-harvesting and tunable electronic properties, structural versatility, and stability. This Review, rather than focusing on synthetic strategies, intends to overview current progress in the structural design strategies for Pcs that could achieve effective photoinactivation of microorganisms. In addition, the Review provides a concise look into the recent developments and applications of nanocarrier-based Pc delivery systems.

Photodynamic therapy, priming and optical imaging: Potential co-conspirators in treatment design and optimization - a Thomas Dougherty Award for Excellence in PDT paper

Photodynamic therapy is a photochemistry-based approach, approved for the treatment of several malignant and non-malignant pathologies. It relies on the use of a non-toxic, light activatable chemical, photosensitizer, which preferentially accumulates in tissues/cells and, upon irradiation with the appropriate wavelength of light, confers cytotoxicity by generation of reactive molecular species. The preferential accumulation however is not universal and, depending on the anatomical site, the ratio of tumor to normal tissue may be reversed in favor of normal tissue. Under such circumstances, control of the volume of light illumination provides a second handle of selectivity. Singlet oxygen is the putative favorite reactive molecular species although other entities such as nitric oxide have been credibly implicated. Typically, most photosensitizers in current clinical use have a finite quantum yield of fluorescence which is exploited for surgery guidance and can also be incorporated for monitoring and treatment design. In addition, the photodynamic process alters the cellular, stromal, and/or vascular microenvironment transiently in a process termed photodynamic priming, making it more receptive to subsequent additional therapies including chemo- and immunotherapy. Thus, photodynamic priming may be considered as an enabling technology for the more commonly used frontline treatments. Recently, there has been an increase in the exploitation of the theranostic potential of photodynamic therapy in different preclinical and clinical settings with the use of new photosensitizer formulations and combinatorial therapeutic options. The emergence of nanomedicine has further added to the repertoire of photodynamic therapy's potential and the convergence and co-evolution of these two exciting tools is expected to push the barriers of smart therapies, where such optical approaches might have a special niche. This review provides a perspective on current status of photodynamic therapy in anti-cancer and anti-microbial therapies and it suggests how evolving technologies combined with photochemically-initiated molecular processes may be exploited to become co-conspirators in optimization of treatment outcomes. We also project, at least for the short term, the direction that this modality may be taking in the near future.

Encapsulation of a Ru(II) Polypyridyl Complex into Polylactide Nanoparticles for Antimicrobial Photodynamic Therapy

Antimicrobial photodynamic therapy (aPDT) also known as photodynamic inactivation (PDI) is a promising strategy to eradicate pathogenic microorganisms such as Gram-positive and Gram-negative bacteria. This therapy relies on the use of a molecule called photosensitizer capable of generating, from molecular oxygen, reactive oxygen species including singlet oxygen under light irradiation to induce bacteria inactivation. Ru(II) polypyridyl complexes can be considered as potential photosensitizers for aPDT/PDI. However, to allow efficient treatment, they must be able to penetrate bacteria. This can be promoted by using nanoparticles. In this work, ruthenium-polylactide (RuPLA) nanoconjugates with different tacticities and molecular weights were prepared from a Ru(II) polypyridyl complex, RuOH. Narrowly-dispersed nanoparticles with high ruthenium loadings (up to 53%) and an intensity-average diameter < 300 nm were obtained by nanoprecipitation, as characterized by dynamic light scattering (DLS). Their phototoxicity effect was evaluated on four bacterial strains (Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa) and compared to the parent compound RuOH. RuOH and the nanoparticles were found to be non-active towards Gram-negative bacterial strains. However, depending on the tacticity and molecular weight of the RuPLA nanoconjugates, differences in photobactericidal activity on Gram-positive bacterial strains have been evidenced whereas RuOH remained non active.

Cationic Porphyrins as Effective Agents in Photodynamic Inactivation of Opportunistic Plumbing Pathogen Legionella pneumophila

Legionella pneumophila is an environmental bacterium, an opportunistic premise plumbing pathogen that causes the Legionnaires’ disease. L. pneumophila presents a serious health hazard in building water systems, due to its high resistance to standard water disinfection methods. Our aim was to study the use of photodynamic inactivation (PDI) against Legionella. We investigated and compared the photobactericidal potential of five cationic dyes. We tested toluidine blue (TBO) and methylene blue (MB), and three 3-N-methylpyridylporphyrins, one tetra-cationic and two tri-cationic, one with a short (CH₃) and the other with a long (C₁₇H₃₅) alkyl chain, against L. pneumophila in tap water and after irradiation with violet light. All tested dyes demonstrated a certain dark toxicity against L. pneumophila; porphyrins with lower minimal effective concentration (MEC) values than TBO and MB. Nanomolar MEC values, significantly lower than with TBO and MB, were obtained with all three porphyrins in PDI experiments, with amphiphilic porphyrin demonstrating the highest PDI activity. All tested dyes showed increasing PDI with longer irradiation (0–108 J/cm²), especially the two hydrophilic porphyrins. All three porphyrins caused significant changes in cell membrane permeability after irradiation and L. pneumophila, co-cultivated with Acanthamoeba castellanii after treatment with all three porphyrins and irradiation, did not recover in amoeba. We believe our results indicate the considerable potential of cationic porphyrins as effective anti-Legionella agents.

Antibacterial Mechanism of Curcumin: A Review

Curcumin is a plant-derived polyphenolic active substance with broad-spectrum antibacterial properties. Curcumin blocks bacterial growth owing to its structural characteristics and the generation of antioxidation products. Curcumin can inhibit bacterial virulence factors, inhibit bacterial biofilm formation and prevent bacterial adhesion to host receptors through the bacterial quorum sensing regulation system. As a photosensitizer, curcumin acts under blue light irradiation to induce phototoxicity and inhibit bacterial growth. Moreover, it can exert a synergistic antibacterial effect with other antibacterial substances. In this review, we summarize the research progress on the antibacterial mechanism of curcumin based on five targeting structures and two modes of action. Our discussion provides a theoretical basis and technical foundation for the development and application of natural antibacterial agents.

Bioactivity studies of porphyrinoids against microsporidia isolated from honeybees

Microsporidian infections are dangerous to honeybees due to the absence of an efficient treatment for nosemosis. In the present work, the abilities of several porphyrins to directly inactivate microsporidia derived from Nosema-infected honeybees were studied in vitro. Amide derivatives of protoporphyrin IX (PPIX) conjugated with one and two amino acid moieties were synthesized, and their activities were compared with those of two cationic porphyrins, TMePyP and TTMePP. The most active porphyrins, PP[Lys-Asp]₂, PP[Lys-TFA]₂, PP[Asp(ONa)₂]₂ and PP[Lys-Lys]₂ at concentrations as low as 10–50 µM exerted significant effects on microsporidia, reducing the number of spores by 67–80% compared to the control. Live-cell imaging of the spores treated with porphyrins showed that only 1.6% and 3.0% of spores remained alive after 24 h-incubation with 50 µM PP[Asp(ONa)₂]₂ and PP[Lys-Asp]₂, respectively. The length of the amino acid side chains and their identity in the PPIX molecules affected the bioactivity of the porphyrin. Importantly, the irradiation of the porphyrins did not enhance their potency in destroying Nosema spores. We showed that the porphyrins accumulated inside the living spores but not inside dead spores, thus the destruction of the microsporidia by non-metallated porphyrins is not dependent on photosensitization, but is associated with their active transport into the spore cell. When administered to honeybees in vivo, PPIX[Lys-TFA]₂ and PPIX[Lys-Lys]₂ reduced spore loads by 69–76% in infected individuals. They both had no toxic effect on honeybees, in contrast to zinc-coordinated porphyrin.

π-Extended Donor-Acceptor Porphyrins and Metalloporphyrins for Antimicrobial Photodynamic Inactivation

Free base, zinc and palladium π‐extended porphyrins containing fused naphthalenediamide units were employed as photosensitizers in antimicrobial photodynamic therapy (aPDT). Their efficacy, assessed by photophysical and in vitro photobiological studies on Gram‐positive bacteria, was found to depend on metal coordination, showing a dramatic enhancement of photosensitizing activity for the palladium complex.

Facile Fabrication of Silicon(IV)Phthalocyanine-Embedded Poly(vinyl alcohol)-Based Antibacterial and Antifouling Interfaces

Interest in the photodynamic inactivation of bacteria as an alternative method to antibiotic treatment continues to grow. Based on this approach, light-activated anti-infective interfaces could be fabricated via incorporation of photosensitizers into the polymer-based materials. In order to combine photobactericidal and antifouling functions, the choice of the carrier polymer is of particular significance: it should enable fast and effective conjugation of photosensitizer and reduce the formation of bioburden on the artificial material in a biological environment. This study reports one-pot fabrication and characterization of two silicon(IV)phthalocyanine /poly(vinyl alcohol)-based electrospun mats. The method relies on the thermal cross-linking of components by esterification using sebacic acid as a cross-linking agent. Fabricated flexible mats showed photosensitizer-dependent antibacterial photoactivity against different Gram-positive bacteria with low cytotoxic effects on human fibroblasts and were effective against bacterial attachment, as an early step toward future biofilm formation. This work provides practical guidelines in developing photoactive materials and interfaces that can be used in nonadhesive wound dressings, food packaging, water, and air filtration.

Multifunctional Photosensitizing and Biotinylated Polystyrene Nanofiber Membranes/Composites for Binding of Biologically Active Compounds

A three-step postprocessing functionalization of pristine electrospun polystyrene nanofiber membranes was used for the preparation of nanostructured biotinylated materials with an externally bonded porphyrin photosensitizer. Subsequently, the material was able to strongly bind biologically active streptavidin derivatives while keeping its photosensitizing and antibacterial properties due to the generation of singlet oxygen under the exclusive control of visible light. The resulting multifunctional materials functionalized by a streptavidin-horseradish peroxidase conjugate as a model bioactive compound preserved its enzymatic activity even in the presence of a porphyrin photosensitizer with some quenching effect on the activity of the photosensitizer. Prolonged kinetics of both singlet oxygen luminescence and singlet oxygen-sensitized delayed fluorescence (SODF) were found after irradiation by visible light. The above results reflected less effective quenching of the porphyrin photosensitizer triplet state by ground state oxygen and indicated hindered oxygen transport (diffusion) due to surface functionalization. We found that SODF could be used as a valuable tool for optimizing photosensitizing efficiency as well as a tool for confirming surface functionalization. Full photosensitizing and enzyme activity could be achieved by a space separation of photosensitizers and enzyme/biomolecules in the nanofiber composites consisting of two layers. The upper layer contained a photosensitizer that generated antibacterial singlet oxygen upon irradiation by light, and the bottom layer retained enzymatic activity for biochemical reactions.

Azides and Porphyrinoids: Synthetic Approaches and Applications. Part 1-Azides, Porphyrins and Corroles

Azides and porphyrinoids (such as porphyrin and corrole macrocycles) can give rise to new derivatives with significant biological properties and as new materials' components. Significant synthetic approaches have been studied. A wide range of products (e.g., microporous organic networks, rotaxane and dendritic motifs, dendrimers as liquid crystals, as blood substitutes for transfusions and many others) can now be available and used for several medicinal and industrial purposes.

Multiple Applications of a Novel Cationic Gemini Surfactant: Anti-Microbial, Anti-Biofilm, Biocide, Salinity Corrosion Inhibitor, and Biofilm Dispersion (Part II)

The Egyptian petroleum industries are incurring severe problems with corrosion, particularly corrosion that is induced by sulfidogenic microbial activities in harsh salinity environments despite extensively using biocides and metal corrosion inhibitors. Therefore, in this study, a synthesized cationic gemini surfactant (SCGS) was tested as a broad-spectrum antimicrobial, anti-bacterial, anti-candida, anti-fungal, anti-biofilm (anti-adhesive), and bio-dispersion agent. The SCGS was evaluated as a biocide against environmental sulfidogenic-bacteria and as a corrosion inhibitor for a high salinity cultivated medium. The SCGS displayed wide spectrum antimicrobial activity with minimum bactericidal/fungicidal inhibitory concentrations. The SCGS demonstrated anti-bacterial, anti-biofilm, and bio-dispersion activity. The SCGS exhibited bactericidal activity against environmental sulfidogenic bacteria and the highest corrosion inhibition efficiency of 93.8% at 5 mM. Additionally, the SCGS demonstrated bio-dispersion activity against the environmental sulfidogenic bacteria at 5.49% salinity. In conclusion, this study provides a novel synthesized cationic surfactant with many applications in the oil and gas industry: as broad-spectrum antimicrobial and anti-biofilm agents, corrosion inhibition for high salinity, biocides for environmentally sulfidogenic bacteria, and as bio-dispersion agents.

Pyridinium-substituted tetraphenylethylene salt-based photosensitizers by varying counter anions: a highly efficient photodynamic therapy for cancer cell ablation and bacterial inactivation

A highly efficient photodynamic therapy of cancer cell ablation and bacterial inactivation by two AIEgens was reported.

Mosquito larvae control by photodynamic inactivation of their intestinal flora - a proof of principal study on Chaoborus sp

Mosquitoes are carriers of dangerous infectious disease pathogens all over the world. Owing to travelling and global warming, tropical disease-carrying species such as Aedes, Anopheles and Culex spread beyond tropical and subtropical zones, even to Europe. The aim of this study is to investigate the potential of photodynamic agents to combat mosquito larvae. Three different photosensitizers were tested on Chaoborus sp. larvae: TMPyP and TPPS as antimicrobial photosensitizers, and mTHPC as a PDT drug against eukaryotic animal and human cells. Chaoborus sp. is a commercially available harmless species developing translucent larvae similar to the larvae of Aedes, Anopheles and Culex. The uptake of photosensitizers by the larvae was tested by fluorescence microscopy. All tested photosensitizers were observed in the intestinal tract of the living larvae, and none of the photosensitizers was found in the larval tissues. In phototoxicity tests, mTHPC and TPPS did not have any effect on the larvae, while TMPyP killed the larvae efficiently. TPPS is an antimicrobial photosensitizer, mainly phototoxic to Gram-positive bacteria. TMPyP is well known as an efficient photosensitizer against Gram-negative bacteria like most species of the intestinal flora. From this result, we conclude that the photodynamic inactivation of the intestinal flora leads to the death of mosquito larvae. The feasibility of mosquito larvae control by photodynamic inactivation of their intestinal flora instead of the direct killing of the larvae is a promising alternative to other highly toxic insecticides. Compared to insecticides and other biochemical toxins, photosensitizers are not dark toxic. No resistance against photosensitizers is known so far. Thus, the dilution of the active substances by being distributed in the environment, which promotes the development of resistance in biocides of all kinds, does not pose danger. Thus, it reduces the potential side effects on environment and human health.

Using Colistin as a Trojan Horse: Inactivation of Gram-Negative Bacteria with Chlorophyllin

Colistin (polymyxin E) is a membrane-destabilizing antibiotic used against Gram-negative bacteria. We have recently reported that the outer membrane prevents the uptake of antibacterial chlorophyllin into Gram-negative cells. In this study, we used sub-toxic concentrations of colistin to weaken this barrier for a combination treatment of Escherichia coli and Salmonella enterica serovar Typhimurium with chlorophyllin. In the presence of 0.25 µg/mL colistin, chlorophyllin was able to inactivate both bacteria strains at concentrations of 5-10 mg/L for E. coli and 0.5-1 mg/L for S. Typhimurium, which showed a higher overall susceptibility to chlorophyllin treatment. In accordance with a previous study, chlorophyllin has proven antibacterial activity both as a photosensitizer, illuminated with 12 mW/cm2, and in darkness. Our data clearly confirmed the relevance of the outer membrane in protection against xenobiotics. Combination treatment with colistin broadens chlorophyllin's application spectrum against Gram-negatives and gives rise to the assumption that chlorophyllin together with cell membrane-destabilizing substances may become a promising approach in bacteria control. Furthermore, we demonstrated that colistin acts as a door opener even for the photodynamic inactivation of colistin-resistant (mcr-1-positive) E. coli cells by chlorophyllin, which could help us to overcome this antimicrobial resistance.

Determining and unravelling origins of reduced photoinactivation efficacy of bacteria in milk

Bovine mastitis is an endemic disease of dairy cattle that is considered to be one of the most frequent and costly diseases in veterinary medicine. An increase in the incidence of disease results in the increased use of antibiotics, which in turn increases the potential of bacterial resistance. This study aimed to investigate the effectiveness of antimicrobial photodynamic therapy (aPDT) in the treatment of bovine mastitis, as an alternative to systemic antibiotics. To identify the key factors affecting photoinactivation efficacy, realistic experiments in view of the end-use were conducted in milk samples using two different photosensitizers: methylene blue (MB) and silicon (IV) phthalocyanine derivative (SiPc). We explored the effects of divalent ions and fat content on the aPDT outcome and determined influence of different proteins on aPDT efficacy. Levels of bacterial sensitivity to PSs varied depending on the type of bacteria (Gram-positive vs. Gram-negative) and light exposure time. Critical interrelated factors affecting aPDT in milk were identified and an efficient combination of treatment conditions that can lead to a full photodynamic inactivation of bacteria was determined.

New Materials Based on Cationic Porphyrins Conjugated to Chitosan or Titanium Dioxide: Synthesis, Characterization and Antimicrobial Efficacy

The post-functionalization of 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide, known as a highly efficient photosensitizer (PS) for antimicrobial photodynamic therapy (aPDT), in the presence of 3- or 4-mercaptobenzoic acid, afforded two new tricationic porphyrins with adequate carboxylic pending groups to be immobilized on chitosan or titanium oxide. The structural characterization of the newly obtained materials confirmed the success of the porphyrin immobilization on the solid supports. The photophysical properties and the antimicrobial photodynamic efficacy of the non-immobilized porphyrins and of the new conjugates were evaluated. The results showed that the position of the carboxyl group in the mercapto units or the absence of these substituents in the porphyrin core could modulate the action of the photosensitizer towards the bioluminescent Gram-negative Escherichia coli bacterium. The antimicrobial activity was also influenced by the interaction between the photosensitizer and the type of support (chitosan or titanium dioxide). The new cationic porphyrins and some of the materials were shown to be very stable in PBS and effective in the photoinactivation of E. coli bacterium. The physicochemical properties of TiO2 allowed the interaction of the PS with its surface, increasing the absorption profile of TiO2, which enables the use of visible light, inactivating the bacteria more efficiently than the corresponding PS immobilized on chitosan.

Advances in aPDT based on the combination of a porphyrinic formulation with potassium iodide: Effectiveness on bacteria and fungi planktonic/biofilm forms and viruses

The increasing world-wide rate of antibiotic resistance as well as the capacity of microorganisms to form biofilms, have led to a higher incidence of mortal infections that require alternative methods for their control. Antimicrobial photodynamic therapy (aPDT) emerged as an effective solution against resistant strains. The present work aims to evaluate the aPDT efficiency of a photosensitizer (PS) based on a low-cost formulation constituted by five cationic porphyrins (FORM) and its potentiation effect by KI on a broad spectrum of microorganisms under white light (380–700 nm, 25 W/m[Formula: see text]. The aPDT assays were performed with different concentrations of FORM (0.1 to 5.0 [Formula: see text]M) and 100 mM of KI on planktonic and biofilm forms of gram-positive (methicillin resistant Staphylococcus aureus–MRSA) and gram-negative (Escherichia coli resistant to chloramphenicol and ampicillin) bacteria, of the fungi Candida albicans and on a T4-like bacteriophage as a mammalian virus model. The results indicate that the FORM alone is an efficient PS to photoinactivate not only gram-negative and gram-positive bacteria, but also C. albicans, in planktonic and biofilm forms, and T4-like phage at low concentrations (<5.0 [Formula: see text]M). The presence of KI enhanced the photodynamic effect of this FORM for all microorganisms on the planktonic form, allowing the reduction of PS concentration and treatment time. The results also show that the combination FORM/KI is highly efficient in the elimination of already well-established biofilms of E. coli,S. aureus and C. albicans. This effect is probably associated with longer-lived iodine reactive species produced during the aPDT treatment.

What an Escherichia coli Mutant Can Teach Us About the Antibacterial Effect of Chlorophyllin

Due to the increasing development of antibiotic resistances in recent years, scientists search intensely for new methods to control bacteria. Photodynamic treatment with porphyrins such as chlorophyll derivatives is one of the most promising methods to handle bacterial infestation, but their use is dependent on illumination and they seem to be more effective against Gram-positive bacteria than against Gram-negatives. In this study, we tested chlorophyllin against three bacterial model strains, the Gram-positive Bacillus subtilis 168, the Gram-negative Escherichia coli DH5α and E. coli strain NR698 which has a deficient outer membrane, simulating a Gram-negative "without" its outer membrane. Illuminated with a standardized light intensity of 12 mW/cm², B. subtilis showed high sensitivity already at low chlorophyllin concentrations (≤10⁵ cfu/mL: ≤0.1 mg/L, 10⁶⁻10⁸ cfu/mL: 0.5 mg/L), whereas E. coli DH5α was less sensitive (≤10⁵ cfu/mL: 2.5 mg/L, 10⁶ cfu/mL: 5 mg/L, 10⁷⁻10⁸ cfu/mL: ineffective at ≤25 mg/L chlorophyllin). E. coli NR698 was almost as sensitive as B. subtilis against chlorophyllin, pointing out that the outer membrane plays a significant role in protection against photodynamic chlorophyllin impacts. Interestingly, E. coli NR698 and B. subtilis can also be inactivated by chlorophyllin in darkness, indicating a second, light-independent mode of action. Thus, chlorophyllin seems to be more than a photosensitizer, and a promising substance for the control of bacteria, which deserves further investigation.

Influence of Cationic meso-Substituted Porphyrins on the Antimicrobial Photodynamic Efficacy and Cell Membrane Interaction in Escherichia coli

Photodynamic inactivation (PDI) is a non-antibiotic option for the treatment of infectious diseases. Although Gram-positive bacteria have been shown to be highly susceptible to PDI, the inactivation of Gram-negative bacteria has been more challenging due to the impermeability properties of the outer membrane. In the present study, a series of photosensitizers which contain one to four positive charges (1–4) were used to evaluate the charge influence on the PDI of a Gram-negative bacteria, Escherichia coli (E. coli), and their interaction with the cell membrane. The dose-response PDI results confirm the relevance of the number of positive charges on the porphyrin molecule in the PDI of E. coli. The difference between the Hill coefficients of cationic porphyrins with 1–3 positive charges and the tetra-cationic porphyrin (4) revealed potential variations in their mechanism of inactivation. Fluorescent live-cell microscopy studies showed that cationic porphyrins with 1–3 positive charges bind to the cell membrane of E. coli, but are not internalized. On the contrary, the tetra-cationic porphyrin (4) permeates through the membrane of the cells. The contrast in the interaction of cationic porphyrins with E. coli confirmed that they followed different mechanisms of inactivation. This work helps to have a better understanding of the structure-activity relationship in the efficiency of the PDI process of cationic porphyrins against Gram-negative bacteria.

Efficacy of blue LED in microbial inactivation: Effect of photosensitization and process parameters

Efficacy of blue (462 ± 3 nm) Light emitting diode (LED) illumination to inactivate the foodborne pathogens like Escherichia coli and Staphylococcus aureus in the presence of exogenous photosensitizer (curcumin) was studied in vitro. The effect of temperature, concentration of photosensitizer and incubation time with photosensitizer for microbial inactivation was investigated and sublethal injury of cells was determined. Mechanism of inactivation by the combination of photosensitizer and blue light was also examined. A maximum reduction of 5.94 ± 0.22 and 5.91 ± 0.20 log CFU/ml was obtained for E. coli and S. aureus, respectively, when treated with photosensitizer (20 μM) at 13 J/cm² of blue light. There was no significant change in the inactivation of these pathogens both at 9 °C and 27 °C in the presence of photosensitizer. Even, the incubation with the photosensitizer didn't show any significant difference on the inactivation of these food-borne pathogens. Sublethal injury (>90% injury) was also observed for the cells treated with photosensitizer and blue light simultaneously. Confocal laser scanning microscopy analysis revealed that membrane integrity was disturbed due to photodynamic activity of curcumin in both the bacteria. Further, both cells produced intracellular reactive oxygen species by the action of photosensitizer and blue light. Scanning electron microscopy of E. coli and S. aureus cells treated with photosensitizer and blue light showed morphological changes in the cell wall compared to untreated group. The study indicated that photodynamic inactivation of foodborne pathogens using LED-based photosensitization can be explored as a potential technique for food safety.

Photodynamic inactivation as an emergent strategy against foodborne pathogenic bacteria in planktonic and sessile states

Foodborne microbial diseases are still considered a growing public health problem worldwide despite the global continuous efforts to ensure food safety. The traditional chemical and thermal-based procedures applied for microbial growth control in the food industry can change the food matrix and lead to antimicrobial resistance. Moreover, currently applied disinfectants have limited efficiency against biofilms. Therefore, antimicrobial photodynamic therapy (aPDT) has become a novel alternative for controlling foodborne pathogenic bacteria in both planktonic and sessile states. The use of aPDT in the food sector is attractive as it is less likely to cause antimicrobial resistance and it does not promote undesirable nutritional and sensory changes in the food matrix. In this review, aspects on the antimicrobial photodynamic technology applied against foodborne pathogenic bacteria and studied in recent years are presented. The application of photodynamic inactivation as an antibiofilm strategy is also reviewed.

Photoinactivation of Pseudomonas syringae pv. actinidiae in kiwifruit plants by cationic porphyrins

The studied cationic porphyrins formulation allows an effective photoinactivation of Pseudomonas syringae pv. actinidiae in kiwifruit leaves under sunlight irradiation, without damaging the plant. Pseudomonas syringae pv. actinidiae (Psa) is a Gram-negative phytopathogenic bacterium responsible for canker on kiwifruit plant. Over the last decade, this bacterium dramatically affected the production of this fruit worldwide, causing significant economic losses. In general, Psa control consists in the application of copper which are toxic and persist in the environment. The application of antimicrobial photodynamic therapy (aPDT) as an alternative to inactivate Psa has already been demonstrated in recent studies that showed a 4 log Psa reduction using the cationic porphyrin Tetra-Py⁺-Me as photosensitizer (PS) and 3 consecutive cycles of treatment with a light irradiance of 150 mW cm^-2. The present work aimed to evaluate the photodynamic efficiency of a new formulation constituted with five cationic porphyrins as PS in Psa inactivation. This new formulation was prepared to have as main component the tri-cationic porphyrin which is considered one of the most efficient photosensitizers in the photoinactivation of microorganisms. The in vitro study with a PS concentration of 5.0 µM and low irradiance, showed a 7.4 log photoinactivation after 60 min. Posteriorly, several assays were performed with the PS at 50 µM on kiwifruit leaves (ex vivo), under different conditions of light and inoculation. The ex vivo assays with artificially contaminated leaves showed a 2.8 and 4.5 log inactivation with low irradiance and sunlight, respectively, after 90 min. After a second treatment with sunlight, a 6.2 log inactivation was achieved. The photoinactivation on naturally contaminated leaves was about 2.3 log after 90 min sunlight irradiation. Ten consecutive cycles of phototreatment in sub-lethal conditions showed that Psa does not develop resistance, nor recover viability. The results suggest that aPDT can be an alternative to the current methods used to control Psa, since it was possible to inactivate this bacterium under sunlight, without damaging the leaves.

An efficient formulation based on cationic porphyrins to photoinactivate Staphylococcus aureus and Escherichia coli

AIM

Antibiotic resistance is an increasingly serious worldwide problem that needs to be addressed with alternative tools. Antimicrobial photodynamic therapy seems a promising approach but in some cases the synthesis of highly efficient photosensitizers requires laborious processes burdened by extensive chromatographic purifications. In this study, we evaluate the suitability of a formulation (Form-1) containing porphyrins bearing different charges, obtained during the synthesis of the highly efficient photosensitizer 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide.

RESULTS

Form-1 was equally effective in the photoinactivation of Escherichia coli and Staphylococcus aureus (reductions >5 log) as the best stand-alone photosensitizer.

CONCLUSION

The effective reduction of bacteria with Form-1 provided promising indications supporting its use, leading to a substantial decrease in costs and production time.

Evaluation of meso-substituted cationic corroles as potential antibacterial agents

Cationic derivatives of 5,10,15-tris[4-(pyridin-4-ylsulphanyl)-2,3,5,6-tetrafluorophenyl]-corrolategallium(III)pyridine and 5,10,15-tris[4-(pyridin-2-ylsulfanyl)-2,3,5,6-tetrafluorophenyl]-correlategallium(III)pyridine were synthesized and their photosensitizing properties against the naturally bioluminescent Gram-negative bacterium Allivibrio fischeri were evaluated. The cationic corrole derivatives exhibited antibacterial activity at micromolar concentrations against this Gram-negative bacterium strain.