Underwater Fabrication of Carbon Nanotube/Coacervate Composites

Soft conductive materials are of interest for a wide range of applications, but their syntheses have remained difficult. Herein, we present a convenient route for underwater fabrication of a composite made of carbon nanotubes (CNTs) and mussel-inspired complex coacervates. The key to success of this method is that CNTs were solubilized very effectively in protocoacervates, which are high-concentration solutions of polyelectrolytes at a pH where only one of them is charged, thereby impeding coacervate formation. Composite materials were formed by the simple injection of CNT-dispersed protocoacervate solutions into water under ambient conditions. The method is simple, fast, and ecofriendly, and composites of CNT-complex coacervate in the form of films or bulk materials were obtained. The composites demonstrated electrical conductivity and tunable mechanical properties, which depended on the concentration of polyelectrolytes and the CNT:protocoacervate ratio. Hence, the composites can be manipulated to attain diverse properties, for examples, tunable reduced modulus (15 to 32 GPa) and hardness (0.3 to 0.7 GPa) as well as an electrical conductivity of up to 4 × 103 S m-1.

Ultra-Tough and Highly Stretchable Dual-Crosslinked Eutectogel Based on Coordinated and Non-Coordinated Two Types Deep Eutectic Solvent Mixture

Eutectogels are gaining attention in flexible device applications for their superior ionic conductivity, stability, biocompatibility, and cost-effectiveness. However, most existing eutectogels suffer from low strength and toughness. Herein, ultra-tough and highly stretchable polyacrylamide (PAM) eutectogels featuring a dual-crosslinked network comprising chemical cross-linking and physical cross-linking facilitated by metal coordination bonds and hydrogen bonds are developed. This is achieved through a controlled strategy involving polymerization of acrylamide in a coordinated metal salt-type deep eutectic solvent (DES) combined with a non-coordinated choline chloride (ChCl)-type DES mixture. By varying the molar ratio of these two types of DES, exceptional and adjustable mechanical properties of the resulting eutectogel are achieved, including a high tensile strength ranging from 2.9 to 8.2 MPa and elongation at break ranging from 1725 to 747%, at a 70 wt% DES content. Furthermore, the reversible non-covalent crosslinking in these eutectogels enables self-recovery and self-healing capabilities of eutectogels. The prepared eutectogels also exhibit outstanding ionic conductivity (3.56 mS cm-1 ), making them well-suited for use as strain sensors in human motion detection. The toughening strategy is universally effective for creating tough eutectogels using coordinated metal salt-type DES with various metal ions, as well as a diverse range of coordinatable polymers.

Rheological Properties of Ionically Crosslinked Viscoelastic 2D Films vs. Corresponding 3D Bulk Hydrogels

Ionically crosslinked hydrogels containing metal coordination motifs have piqued the interest of researchers in recent decades due to their self-healing and adhesive properties. In particular, catechol-functionalized bulk hydrogels have received a lot of attention because of their bioinspired nature. By contrast, very little is known about thin viscoelastic membranes made using similar chelator-ion pair motifs. This shortcoming is surprising because the unique interfacial properties of these membranes, namely, their self-healing and adhesion, would be ideal for capsule shells, adhesives, or for drug delivery purposes. We recently demonstrated the feasibility to fabricate 10 nm thick viscoelastic membranes from catechol-functionalized surfactants that are ionically crosslinked at the liquid/liquid interface. However, it is unclear if the vast know-how existing on the influence of the chelator-ion pair on the mechanical properties of ionically crosslinked three-dimensional (3D) hydrogels can be translated to two-dimensional (2D) systems. To address this question, we compare the dynamic mechanical properties of ionically crosslinked pyrogallol functionalized hydrogels with those of viscoelastic membranes that are crosslinked using the same chelator-ion pairs. We demonstrate that the storage and loss moduli of viscoelastic membranes follow a trend similar to that of the hydrogels, with the membrane becoming stronger as the ion-chelator affinity increases. Yet, membranes relax significantly faster than bulk equivalents. These insights enable the targeted design of viscoelastic, adhesive, self-healing membranes possessing tunable mechanical properties. Such capsules can potentially be used, for example, in cosmetics, as granular inks, or with additional work that includes replacing the fluorinated block by a hydrocarbon-based one in drug delivery and food applications.

Self-Healing Superwetting Surfaces, Their Fabrications, and Properties

The research on superwetting surfaces with a self-healing function against various damages has progressed rapidly in the recent decade. They are expected to be an effective approach to increasing the durability and application robustness of superwetting materials. Various methods and material systems have been developed to prepare self-healing superwetting surfaces, some of which mimic natural superwetting surfaces. However, they still face challenges, such as being workable only for specific damages, external stimulation to trigger the healing process, and poor self-healing ability in the water, marine, or biological systems. There is a lack of fundamental understanding as well. This article comprehensively reviews self-healing superwetting surfaces, including their fabrication strategies, essential rules for materials design, and self-healing properties. Self-healing triggered by different external stimuli is summarized. The potential applications of self-healing superwetting surfaces are highlighted. This article consists of four main sections: (1) the functional surfaces with various superwetting properties, (2) natural self-healing superwetting surfaces (i.e., plants, insects, and creatures) and their healing mechanism, (3) recent research development in various self-healing superwetting surfaces, their preparation, wetting properties in the air or liquid media, and healing mechanism, and (4) the prospects including existing challenges, our views and potential solutions to the challenges, and future research directions.

Cooperation of Zr(IV)-N and Zr(IV)-O coordinate bonds of Zr(IV)-amide ensures the transparent and tough polyacrylamide hydrogels

Developing advanced soft machines and tissue engineering for load-bearing cartilage or tendons requires tough hydrogels. However, the construction of double or triple crosslinked networks for these tough hydrogels, i.e., a strong network crosslinked by covalent bonds and one or two sacrificial networks built by hydrogen bonds or coordinate bonds, generally asks for multiple steps. It remains a challenge to develop hydrogels with a combination of excellent toughness and a high content of water through the time-saving one-pot process. This study demonstrates that this puzzle could be solved through engineering zirconium(IV)-amide coordinate bonds. To be specific, the combination of strong Zr(IV)-O and moderate Zr(IV)-N coordinate bonds in Zr-polyacrylamide (Zr-PAAm) hydrogels has the advantage that they are usually generated through multiple cross-linked networks. Compared to chemical crosslinked PAAm hydrogels, the highly transparent Zr-PAAm hydrogels crosslinked by Zr(NO₃)₄ displayed a 26-times increase in fracture stress, 4-times in fracture strain, 6-times in elastic modulus, and over 250-times in toughness. Besides, the mechanical properties of Zr-PAAm hydrogels could be altered over a wide range via changing the anion species, showing a dependence on the Hofmeister effect. The co-existence of Zr(IV)-N and Zr(IV)-O has been confirmed through XPS and FTIR characterizations. In particular, the effect of Zr(IV)-N in Zr-PAAm hydrogels has been verified by comparing the property changes of Zr-PAAm hydrogels before and after swelling in water, in which the Zr(IV)-N in the as-prepared hydrogels was replaced by Zr(IV)-O in the swollen gels. With ultra-stretchability and high transparency, the colorless Zr-PAAm hydrogels displayed rich interference colors under stretching, which brought great potential in anti-counterfeiting materials.

Bio-macromolecular design roadmap towards tough bioadhesives

Emerging sutureless wound-closure techniques have led to paradigm shifts in wound management. State-of-the-art biomaterials offer biocompatible and biodegradable platforms enabling high cohesion (toughness) and adhesion for rapid bleeding control as well as robust attachment of implantable devices. Tough bioadhesion stems from the synergistic contributions of cohesive and adhesive interactions. This Review provides a biomacromolecular design roadmap for the development of tough adhesive surgical sealants. We discuss a library of materials and methods to introduce toughness and adhesion to biomaterials. Intrinsically tough and elastic polymers are leveraged primarily by introducing strong but dynamic inter- and intramolecular interactions either through polymer chain design or using crosslink regulating additives. In addition, many efforts have been made to promote underwater adhesion via covalent/noncovalent bonds, or through micro/macro-interlock mechanisms at the tissue interfaces. The materials settings and functional additives for this purpose and the related characterization methods are reviewed. Measurements and reporting needs for fair comparisons of different materials and their properties are discussed. Finally, future directions and further research opportunities for developing tough bioadhesive surgical sealants are highlighted.

Metal Ion-Directed Functional Metal-Phenolic Materials

Metal ions are ubiquitous in nature and play significant roles in assembling functional materials in fields spanning chemistry, biology, and materials science. Metal-phenolic materials are assembled from phenolic components in the presence of metal ions through the formation of metal-organic complexes. Alkali, alkali-earth, transition, and noble metal ions as well as metalloids interacting with phenolic building blocks have been widely exploited to generate diverse hybrid materials. Despite extensive studies on the synthesis of metal-phenolic materials, a comprehensive summary of how metal ions guide the assembly of phenolic compounds is lacking. A fundamental understanding of the roles of metal ions in metal-phenolic materials engineering will facilitate the assembly of materials with specific and functional properties. In this review, we focus on the diversity and function of metal ions in metal-phenolic material engineering and emerging applications. Specifically, we discuss the range of underlying interactions, including (i) cation-π, (ii) coordination, (iii) redox, and (iv) dynamic covalent interactions, and highlight the wide range of material properties resulting from these interactions. Applications (e.g., biological, catalytic, and environmental) and perspectives of metal-phenolic materials are also highlighted.

Construction of Supramolecular Systems That Achieve Lifelike Functions

The Nobel Prize in Chemistry was awarded in 1987 and 2016 for research in supramolecular chemistry on the "development and use of molecules with structure-specific interactions of high selectivity" and the "design and production of molecular machines", respectively. This confirmed the explosive development of supramolecular chemistry. In addition, attempts have been made in systems chemistry to embody the complex functions of living organisms as artificial non-equilibrium chemical systems, which have not received much attention in supramolecular chemistry. In this review, we explain recent developments in supramolecular chemistry through four categories: stimuli-responsiveness, time evolution, dissipative self-assembly, and hierarchical expression of functions. We discuss the development of non-equilibrium supramolecular systems, including the use of molecules with precisely designed properties, to achieve functions found in life as a hierarchical chemical system.

Bio-based and bio-inspired adhesives from animals and plants for biomedical applications

With the "many-headed" slime mold Physarum polycelphalum having been voted the unicellular organism of the year 2021 by the German Society of Protozoology, we are reminded that a large part of nature's huge variety of life forms is easily overlooked - both by the general public and researchers alike. Indeed, whereas several animals such as mussels or spiders have already inspired many scientists to create novel materials with glue-like properties, there is much more to discover in the flora and fauna. Here, we provide an overview of naturally occurring slimy substances with adhesive properties and categorize them in terms of the main chemical motifs that convey their stickiness, i.e., carbohydrate-, protein-, and glycoprotein-based biological glues. Furthermore, we highlight selected recent developments in the area of material design and functionalization that aim at making use of such biological compounds for novel applications in medicine - either by conjugating adhesive motifs found in nature to biological or synthetic macromolecules or by synthetically creating (multi-)functional materials, which combine adhesive properties with additional, problem-specific (and sometimes tunable) features.

Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.

Design of Protein-Based Liquefied Cell-Laden Capsules with Bioinspired Adhesion for Tissue Engineering

Platforms with liquid cores are extensively explored as cell delivery vehicles for cell-based therapies and tissue engineering. However, the recurrence of synthetic materials can impair its translation into the clinic. Inspired by the adhesive proteins secreted by mussels, liquefied capsule is developed using gelatin modified with hydroxypyridinones (Gel-HOPO), a catechol analogue with oxidant-resistant properties. The protein-based liquefied macrocapsule permitted the compartmentalization of living cells by an approachable and non-time-consuming methodology resorting to i) superhydrophobic surfaces as a processing platform of hydrogel beads, ii) gelation of gelatin at temperatures < 25 °C, iii) iron coordination of the hydroxypyridinone (HOPO) moieties at physiological pH, and iv) core liquefaction at 37 °C. With the design of a proteolytically degradable shell, the possibility of encapsulating human adipose-derived mesenchymal stem cells (hASC) with and without the presence of polycaprolactone microparticles (μPCL) is evaluated. Showing prevalence toward adhesion to the inner shell wall, hASC formed a monolayer evidencing the biocompatibility and adequate mechanical properties of these platforms for proliferation, diminishing the need for μPCL as a supporting substrate. This new protein-based liquefied platform can provide biofactories devices of both fundamental and practical importance for tissue engineering and regenerative medicine or in other biotechnology fields.

Dual-Responsive Material Based on Catechol-Modified Self-Immolative Poly(Disulfide) Backbones

Functional materials engineered to degrade upon triggering are in high demand due their potentially lower impact on the environment as well as their use in sensing and in medical applications. Here, stimuli-responsive polymers are prepared by decorating a self-immolative poly(dithiothreitol) backbone with pendant catechol units. The highly functional polymer is fashioned into stimuli-responsive gels, formed through pH-dependent catecholato-metal ion cross-links. The gels degrade in response to specific environmental changes, either by addressing the pH responsive, non-covalent, catecholato-metal complexes, or by addition of a thiol. The latter stimulus triggers end-to-end depolymerization of the entire self-immolative backbone through end-cap replacement via thiol-disufide exchanges. Gel degradation is visualized by release of a dye from the supramolecular gel as it itself is converted into smaller molecules.

Shape retaining self-healing metal-coordinated hydrogels

Metal-coordinated hydrogels are physical hydrogels entirely crosslinked by complexes between ligand decorated polymers and metal ions. The mechanical properties of these hydrogels strongly depend on the density and dynamics of metal-coordinated interactions. Most commonly, telechelic metal-coordinated hydrogels contain catechol or histidine ligands, although hydrogels containing a stronger complexation agent, nitrocatechol, have been reported. Here, we introduce a pyrogallol end-functionalized polymer that can be crosslinked with di- and trivalent ions, in contrast to previously reported metal-coordinated hydrogels. We can tune the mechanical properties of the hydrogels with the types of ions used and the density of crosslinking sites. Ions form nm-sized precipitates that bind to pyrogallols and impart distinct properties to the hydrogels: strong ion-pyrogallol interactions that form in the presence of Al3+, V3+, Mn2+, Fe3+, Co2+, Ni2+ and Cu2+ result in long relaxation times. The resulting hydrogels display solid-like yet reversible mechanical properties, such that they can be processed into macroscopic 3D structures that retain their shapes. Weak ion-pyrogallol interactions that form in the presence of Ca2+ or Zn2+ result in short relaxation times. The resulting hydrogels display a fast self-healing behavior, suited for underwater glues, for example. The flexibility of tuning the mechanical properties of hydrogels simply by selecting the adequate ion-pyrogallol pair broadens the mechanical properties of metal-coordinated hydrogels to suit a wide range of applications that require them to retain their shape for a given time to act as dampers.

A platform for functionalization of cellulose, chitin/chitosan, alginate with polydopamine: A review on fundamentals and technical applications

Nature provides concepts and materials with interesting functionalities to be implemented in innovative and sustainable materials. In this review, it is illustrated how the combination of biological macromolecules, i.e. polydopamine and polysaccharides (cellulose, chitin/chitosan, alginate), enables to create functional materials with controlled properties. The mussel-adhesive properties rely on the secretion of proteins having 3,4-dihydroxyphenylalanine amino acid with catechol groups. Fundamental understanding on the biological functionality and interaction mechanisms of dopamine in the mussel foot plaque is presented in parallel with the development of synthetic analogues through extraction or chemical polymer synthesis. Subsequently, modification of cellulose, chitin/chitosan or alginate and their nanoscale structures with polydopamine is discussed for various technical applications, including bio- and nanocomposites, films, filtration or medical membranes, adhesives, aerogels, or hydrogels. The presence of polydopamine stretches far beyond surface adhesive properties, as it can be used as an intermediate to provide additional performance of hydrophobicity, self-healing, antimicrobial, photocatalytic, sensoric, adsorption, biocompatibility, conductivity, coloring or mechanical properties. The dopamine-based 'green' chemistry can be extended towards generalized catechol chemistry for modification of polysaccharides with tannic acid, caffeic acid or laccase-mediated catechol functionalization. Therefore, the modification of polysaccharides with polydopamine or catechol analogues provides a general platform for sustainable material functionalization.

Mussel byssus cuticle-inspired ultrastiff and stretchable triple-crosslinked hydrogels

Applications in the harsh environment require hydrogels with ultra-stiffness, toughness, and stretchability. However, it remains a challenge to increase the elastic modulus without sacrificing the maximum elongation of hydrogels, because of the trade-off between stiffness and extensibility. Inspired by the crosslinking hierarchy of mussel byssus cuticle, here, we report a strategy to fabricate an ultra-stiff, tough and stretchable triple-crosslinked (TC) hydrogel. The polymer is crosslinked by chemical crosslinker at first, subsequently by introducing a polyphenolic compound, tannic acid (TA), and metal ions. The hydrogen-bond-based network between the polymer and TA works as an extensible and energy-dissipative network, mimicking the matrix of the cuticle, while the higher crosslinked domains formed by the coordinate bonds between TA and metal ions contribute to the stiffness. The triple-crosslinked hydrogel exhibits two orders of magnitude increase in stiffness (E = 58 MPa), but without sacrificing the maximum elongation (ε = 850%), compared with those of metal-free hydrogels (E = 0.18 MPa, and ε = 860%). The combination of ultra-stiffness, toughness, and stretchability in hydrogels is successfully achieved through leveraging the hierarchically cross-linked network based on hydrogen bonding and coordination bonding. Moreover, utilizing the wide distribution of bonding strength of coordination interaction, the mechanical properties of triple-crosslinked hydrogels can be manipulated by using different kinds of catechol-metal coordination.

Fabrication of an injectable hydrogel with inherent photothermal effects from tannic acid for synergistic photothermal-chemotherapy

Developing injectable hydrogels with near-infrared (NIR)-responsive photothermal effects has increasingly become a promising strategy for local cancer treatment via combinational photothermal-chemotherapy. Herein, a biocompatible hydrogel with a remarkable shear-thinning and recovery capability for injection application was fabricated from 4-arm-PEG-SH and tannic acid through chemical crosslinking and multiple physical interactions. Benefiting from the formation of dynamic TA/Fe3+ complexes within gel networks, the obtained hydrogel exhibited an intrinsic NIR absorption property for photothermal ablation of tumor cells, and enhanced cellular uptake of chemotherapeutic drugs. Both in vitro and in vivo experiments revealed that the injectable hydrogel exhibited an excellent biocompatibility and a synergistic therapeutic effect on tumor growth via combinational photothermal-chemotherapy. Therefore, this work provides a promising attempt to develop an injectable and NIR-responsive hydrogel from TA/Fe3+ complexes, which could work as a localized drug delivery platform for synergistic photothermal-chemotherapy.

Injectable, strong and bioadhesive catechol-chitosan hydrogels physically crosslinked using sodium bicarbonate

Fast-gelling chitosan thermosensitive hydrogels have proven to be excellent matrices for targeted drug-delivery and cell therapy. In this work, we demonstrate the possibility of designing injectable bioadhesive hydrogels with a high gelation rate by modifying chitosan with catechol (cat-CH) and using sodium bicarbonate (SHC) as a gelling agent. Cat-CH/SHC hydrogels gel under 5 min at 37 °C and reach a high secant modulus after 24 h (E = 90 kPa at 50% strain). Besides, they show significantly higher adhesion to tissues than chitosan hydrogels thanks to the combination of catechol grafting and physical crosslinking. Their pH and osmolality stayed inside the physiological range. While biocompability tests will be mandatory to conclude regarding their potential for drug or cell encapsulation, these hydrogels uniquely combine physiological compatibility, injectability, fast gelation, good cohesion, and bioadhesion.

Rational Design of Mussel-Inspired Hydrogels with Dynamic Catecholato-Metal Coordination Bonds

Nature has often been the main source of inspiration for designing smart functional materials. As an example, mussels can attach to almost any wet surfaces, for example, wood, rocks, metal, etc., due to the presence of catechols containing amino acid 3,4-dihydroxyphenyl-l-alanine (DOPA). Fabrication of mussel-inspired hydrogels using dynamic catecholato-metal coordination bonds has recently been in the limelight because of the hydrogels' ease of gelation, interesting self-healing, self-recovery, adhesiveness, and pH-responsiveness, as well as shear-thinning and mechanical properties. Mussel inspired hydrogels take advantage of catechols, for example, DOPA in the blue mussel, to undergo catecholatometal gelation through coordination chemistry. This review explores the latest developments in the fabrication of such hydrogels using catecholato-metal coordination bonds, and discusses their potential applications in sensors, flexible electronics, tissue engineering, and wound dressing. Moreover, current challenges and prospects of such hydrogels are discussed. The main focus of this paper is on providing a deeper understanding of this growing field in terms of chemistry, physics, and associated properties.

Compartmentalized processing of catechols during mussel byssus fabrication determines the destiny of DOPA

Inspired largely by the role of the posttranslationally modified amino acid dopa (DOPA) in mussel adhesion, catechol functional groups have become commonplace in medical adhesives, tissue scaffolds, and advanced smart polymers. Yet, the complex redox chemistry of catechol groups complicates cross-link regulation, hampering fabrication and the long-term stability/performance of mussel-inspired polymers. Here, we investigated the various fates of DOPA residues in proteins comprising mussel byssus fibers before, during, and after protein secretion. Utilizing a combination of histological staining and confocal Raman spectroscopy on native tissues, as well as peptide-based cross-linking studies, we have identified at least two distinct DOPA-based cross-linking pathways during byssus fabrication, achieved by oxidative covalent cross-linking or formation of metal coordination interactions under reducing conditions, respectively. We suggest that these end states are spatiotemporally regulated by the microenvironments in which the proteins are stored prior to secretion, which are retained after formation-in particular, due to the presence of reducing moieties. These findings provide physicochemical pathways toward greater control over properties of synthetic catechol-based polymers and adhesives.

The recent progress of tissue adhesives in design strategies, adhesive mechanism and applications

Tissue adhesives have emerged as an effective method for wound closure and hemostasis in recent decades, due to their ability to bond tissues together, preventing separation from one tissue to another. However, existing tissue adhesives still have several limitations. Tremendous efforts have been invested into developing new tissue adhesives by improving upon existing adhesives through different strategies. Therefore, highlighting and analyzing these design strategies are essential for developing the next generation of advanced adhesives. To this end, we reviewed the available strategies for modifying traditional adhesives (including cyanoacrylate glues, fibrin sealants and BioGlue), as well as design of emerging adhesives (including gelatin sealants, methacrylated sealants and bioinspired adhesives), focusing on their structures, adhesive mechanisms, advantages, limitations, and current applications. The bioinspired adhesives have numerous advantages over traditional adhesives, which will be a wise direction for achieving tissue adhesives with superior properties.

Recent progress in synthesis and application of mussel-inspired adhesives

The rapid and robust adhesion of marine mussels to diverse solid surfaces in wet environments is mediated by the secreted mussel adhesive proteins which are abundant in a catecholic amino acid, l-3,4-dihydroxyphenylalanine (Dopa). Over the last two decades, enormous efforts have been devoted to the development of synthetic mussel-inspired adhesives with water-resistant adhesion and cohesion properties by modifying polymer systems with Dopa and its analogues. In the present review, an overview of the unique features of various mussel foot proteins is provided in combination with an up-to-date understanding of catechol chemistry, which contributes to the strong interfacial binding via balancing a variety of covalent and noncovalent interactions including oxidative cross-linking, electrostatic interaction, metal-catechol coordination, hydrogen bonding, hydrophobic interactions and π-π/cation-π interactions. The recent developments of novel Dopa-containing adhesives with on-demand mechanical properties and other functionalities are then summarized under four broad categories: viscous coacervated adhesives, soft adhesive hydrogels, smart adhesives, and stiff adhesive polyesters, where their emerging applications in engineering, biological and biomedical fields are discussed. Limitations of the developed adhesives are identified and future research perspectives in this field are proposed.

Stimuli-responsive degrafting of polymer brushes via addressable catecholato-metal attachments

Surface attached catecholato-metal complexes serve as polymer brush initiators with well-defined densities and enable stimuli-responsive degrafting of polymer brushes.

Mussel-inspired hydrogels: from design principles to promising applications

This review presents the recent progress of mussel-inspired hydrogels from fundamental interaction mechanisms and design principles to promising applications.

Bioinspired self-healing, superliquiphobic and self-cleaning hydrogel-coated surfaces with high durability

Bioinspired self-healing materials are being developed with intrinsic or extrinsic mechanisms. Some materials heal by an external stimulus, such as heat, UV light, pH, electric field and humidity. Hydrogels are among the commonly used materials, which can self-heal by application of an external stimulus. In this study, a self-healing polyacrylamide hydrogel was selected which is known to swell when exposed to water and heal. Silica nanoparticles were added to the hydrogel and a fluorosilane overcoat was used to produce a superliquiphobic surface with a low tilt angle and self-cleaning properties. A fused titania coating on the glass substrate was used to promote adhesion to hydrogel coatings. Hydrogel-based coatings exhibited the ability to repel water and oil, anti-icing properties down to -60°C, self-cleaning, the ability to maintain superliquiphobicity in hot environments up to about 95°C and high wear resistance. The hydrogel-based coating also demonstrated self-healing capability after hydration of a scratched surface. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology (part 2)'.

Bioinspired Metal⁻Polyphenol Materials: Self-Healing and Beyond

The blue mussel incorporates the polyphenolic amino acid l-3,4-dihydroxyphenylalanine (DOPA) to achieve self-healing, pH-responsiveness, and impressive underwater adhesion in the byssus threads that ensure the survival of the animal. This is achieved by a pH-dependent and versatile reaction chemistry of polyphenols, including both physical interactions as well as reversible and irreversible chemical bonding. With a short introduction to the biological background, we here review the latest advances in the development of smart materials based on the metal-chelating capabilities of polyphenols. We focus on new ways of utilizing the polyphenolic properties, including studies on the modifications of the nearby chemical environment (on and near the polyphenolic moiety) and on the incorporation of polyphenols into untraditional materials.

Electrochemical-Mediated Gelation Of Catechol-Bearing Hydrogels Based On Multimodal Crosslinking

Catechol-bearing polymers form hydrogel networks through cooperative oxidative crosslinking and coordination chemistry. Here we describe the kinetics of cation-dependent electrochemical-mediated gelation of precursor solutions composed of catechol functionalized four-arm poly(ethylene glycol) combined with select metal cations. The gelation kinetics, mechanical properties, crosslink composition, and self-healing capacity is a strong function of the valency and redox potential of metal ions in the precursor solution. Catechol-bearing hydrogels exhibit highly compliant mechanical properties with storage moduli ranging from G' = 0.1-5 kPa depending on the choice of redox active metal ions in the precursor solution. The gelation kinetics is informed by the net cell potential of redox active components in the precursor solution. Finally, redox potential of the metal ion precursor can differentially alter the effective density of crosslinks in networks and confer properties to hydrogels such as self-healing capacity. Taken together, this parametric study generates new insight to inform the design of catechol-bearing hydrogel networks formed by electrochemical-mediated multimodal crosslinking.

Healing through Histidine: Bioinspired Pathways to Self-Healing Polymers via Imidazole⁻Metal Coordination

Biology offers a valuable inspiration toward the development of self-healing engineering composites and polymers. In particular, chemical level design principles extracted from proteinaceous biopolymers, especially the mussel byssus, provide inspiration for design of autonomous and intrinsic healing in synthetic polymers. The mussel byssus is an acellular tissue comprised of extremely tough protein-based fibers, produced by mussels to secure attachment on rocky surfaces. Threads exhibit self-healing response following an apparent plastic yield event, recovering initial material properties in a time-dependent fashion. Recent biochemical analysis of the structure-function relationships defining this response reveal a key role of sacrificial cross-links based on metal coordination bonds between Zn2+ ions and histidine amino acid residues. Inspired by this example, many research groups have developed self-healing polymeric materials based on histidine (imidazole)-metal chemistry. In this review, we provide a detailed overview of the current understanding of the self-healing mechanism in byssal threads, and an overview of the current state of the art in histidine- and imidazole-based synthetic polymers.

Robust, Stretchable, and Self-Healable Supramolecular Elastomers Synergistically Cross-Linked by Hydrogen Bonds and Coordination Bonds

Polymeric elastomers integrated with high mechanical toughness and excellent self-healing ability can find attractive applications in electronic skin, soft robotics, and electrical devices. However, simultaneously enhancing the mechanical and self-healing properties of elastomers is still a great challenge because it is difficult to balance the effects between strong and weak cross-linking bonds. Here, a novel self-healing elastomer is developed via a one-pot polycondensation reaction between bis(3-aminopropyl)-terminated poly(dimethylsiloxane) and 2,4'-tolylene diisocyanate, followed by being coordinated with Al(III) ions by metal-coordination bonds. In this elastomer system, the quadruple hydrogen bonds not only are able to achieve rapid reformation after fracture but also can dissipate strain energy as a weak dynamic bond, endowing the elastomer with excellent self-healing ability and high stretchability, while the treble Al-coordination bonds acting as a strong dynamic bond contribute to the robust molecular networks, leading to the significantly improved robustness and elasticity of the self-healing elastomer. Owing to the accuracy design, the synthesized elastomer exhibits all the desired properties, including high tensile stress (2.6 MPa), exceptional toughness (∼14.7 MJ m^-3), high stretchability (∼1700%), and excellent self-healing ability (90%). The robust self-healing elastomer enables the easy fabrication of flexible electronic skin, which will open a new avenue for next-generation electrical devices.

Mimicking Dynamic Adhesiveness and Strain-Stiffening Behavior of Biological Tissues in Tough and Self-Healable Cellulose Nanocomposite Hydrogels

Although self-healing gels with structural resemblance to biological tissues attract great attention in biomedical fields, it remains a dilemma for combination between fast self-healing properties and high mechanical toughness. On the basis of the design of dynamic reversible cross-links, we incorporate rigid tannic acid-coated cellulose nanocrystal (TA@CNC) motifs into the poly(vinyl alcohol) (PVA)-borax dynamic networks for the fabrication of a high toughness and rapidly self-healing nanocomposite (NC) hydrogel, together with dynamically adhesive and strain-stiffening properties that are particularly indispensable for practical applications in soft tissue substitutes. The results demonstrate that the obtained NC gels present a highly interconnected network, where flexible PVA chains wrap onto the rigid TA@CNC motifs and form the dynamic TA@CNC-PVA clusters associated by hydrogen bonds, affording the critical mechanical toughness. The synergetic interactions between borate-diol bonds and hydrogen bonds impart a typical self-healing behavior into the NC gels, allowing the dynamic cross-linked networks to undergo fast rearrangement in the time scale of seconds. Moreover, the obtained NC hydrogels not only mimic the main feature of biological tissues with the unique strain-stiffening behavior but also display unique dynamic adhesiveness to nonporous and porous substrates. It is expected that this versatile approach opens up a new prospect for the rational design of multifunctional cellulosic hydrogels with remarkable performance to expand their applications.

A pH-induced self-healable shape memory hydrogel with metal-coordination cross-links

A 4-armed PEG–DA hydrogel was fabricated, which showed regulated shape memory and self-healing properties at different pH values.

Fast and Green Synthesis of an Oligo-Hydrocaffeic Acid-Based Adhesive

A green, mussel-inspired bioadhesive based on oligomerization of hydrocaffeic acid was synthesized in water by an ultrafast one-step reaction in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide as an activating agent. The resulting oligomers exhibited strong wet adhesion when applied to different substrates including glass, stainless steel, and aluminum. Compared to most commercial adhesives, this bioinspired adhesive is produced via a sustainable and green process, i.e., aqueous-based synthesis, one-step reaction, and in the absence of any purification step to obtain the final functional adhesive.

Iron Gall Ink Revisited: In Situ Oxidation of Fe(II)-Tannin Complex for Fluidic-Interface Engineering

The ancient wisdom found in iron gall ink guides this work to a simple but advanced solution to the molecular engineering of fluidic interfaces. The Fe(II)-tannin coordination complex, a precursor of the iron gall ink, transforms into interface-active Fe(III)-tannin species, by oxygen molecules, which form a self-assembled layer at the fluidic interface spontaneously but still controllably. Kinetic studies show that the oxidation rate is directed by the counteranion of Fe(II) precursor salts, and FeCl₂ is found to be more effective than FeSO₄ -an ingredient of iron gall ink-in the interfacial-film fabrication. The optimized protocol leads to the formation of micrometer-thick, free-standing films at the air-water interface by continuously generating Fe(III)-tannic acid complexes in situ. The durable films formed are transferable, self-healable, pliable, and postfunctionalizable, and are hardened further by transfer to the basic buffer. This O₂ -instructed film formation can be applied to other fluidic interfaces that have high O₂ level, demonstrated by emulsion stabilization and concurrent capsule formation at the oil-water interface with no aid of surfactants. The system, inspired by the iron gall ink, provides new vistas on interface engineering and related materials science.

Spray Assembly of Metal-Phenolic Networks: Formation, Growth, and Applications

Hybrid conformal coatings, such as metal-phenolic networks (MPNs) that are constructed from the coordination-driven assembly of natural phenolic ligands, are of interest in areas including biomedicine, separations, and energy. To date, most MPN coatings have been prepared by immersing substrates in solutions containing the phenolic ligands and metal ions, which is a suitable method for coating small or flexible objects. In contrast, more industrially relevant methods for coating and patterning large substrates, such as spray assembly, have been explored to a lesser extent toward the fabrication of MPNs, particularly regarding the effect of process variables on MPN growth. Herein, a spray assembly method was used to fabricate MPN coatings with various phenolic building blocks and metal ions and their formation and patterning were explored for different applications. Different process parameters including solvent, pH, and metal-ligand pair allowed for control over the film properties such as thickness and roughness. On the basis of these investigations, a potential route for the formation of spray-assembled MPN films was proposed. Conditions favoring the formation of bis complexes could produce thicker coatings than those favoring the formation of mono or tris complexes. Finally, the spray-assembled MPNs were used to generate superhydrophilic membranes for oil-water separation and colorless films for UV shielding. The present study provides insights into the chemistry of MPN assembly and holds promise for advancing the fabrication of multifunctional hybrid materials.