High-performance carboxymethyl starch/PVA based intelligent packaging films engineered with Cu-Trp nanocrystal as functional compatibilizer

A spindle-like Cu-based framework (Cu-Trp, Trp = L-Tryptophan) nanocrystal with ammonia-responsiveness was fabricated via simple aqueous solution approach, and it was subsequently explored as a functional compatibilizer of carboxymethyl starch/polyvinyl alcohol (CMS/PVA) blend toward constructing high-performance intelligent packaging films. The results showed that incorporation of Cu-Trp nanocrystal into CMS/PVA blend resulted in significant promotions regarding to the compatibility, mechanical strength (42.92 MPa), UV-blocking (with UV transmittance of only 2.4%), and water vapor barrier effectiveness of the blend film. Besides, the constructed CMS/PVA/Cu-Trp nanocomposite film exhibited superb long-term color stability, favorable antibacterial capacity (over 98.0%) toward both E. coli and S. aureus bacteria, as well as color change ability under ammonia environment. Importantly, the application trial confirmed that the CMS/PVA/Cu-Trp nanocomposite film is capable of visually monitoring shrimp spoilage during storage. These results implied that the CMS/PVA/Cu-Trp nanocomposite film holds tremendous potential as an intelligent active packaging material.

Glutaraldehyde crosslinked ternary carboxymethylcellulose/polyvinyl alcohol/polyethyleneimine film with enhanced mechanical properties, water resistance, antibacterial activity, and UV-shielding ability without any UV absorbents

Despite the plethora of methods reported for fabricating ultraviolet (UV) shielding films using various UV absorbers to date, it remains a major challenge for the development of novel UV shielding films that simultaneously exhibit excellent transparency. In this work, a novel composite film (GA-x-CMC/PVA/PEI) is fabricated by integrating anionic carboxymethylcellulose (CMC), cationic polyethyleneimine (PEI), and polyvinyl alcohol (PVA) via electrostatic and hydrogen bond interactions and further cross-linking with glutaraldehyde (GA). Herein, PVA expands hydrogen bonding networks, reduces film haze, and enhances its mechanical strength. GA acts as a crosslinker in producing Schiff bases with PEI and acetals with CMC and PVA. The synthesized GA-x-CMC/PVA/PEI composite film possesses a notable amount of unsaturated -CH=N- bonds of Schiff base, resulting from the condensation of PEI and GA, which exhibit superior shielding efficiency against both UV-A and UV-B rays while maintaining exceptional transparency, visibility, and simultaneously enhancing mechanical properties and thermal stability. Notably, increasing the content of PEI leads to almost complete shielding of the entire UV spectrum (<400 nm) due to the increasing of the number of -CH=N- unsaturated bonds. Furthermore, the obtained film without any UV-shielding additives has exceptional mechanical properties, hydrophobicity, and antibacterial properties, rendering it a wide application prospect.

Stretchable and biodegradable plant-based redox-diffusion batteries

The redox-diffusion (RD) battery concept introduces an environmentally friendly solution for stretchable batteries in autonomous wearable electronics. By utilising plant-based redox-active biomolecules and cellulose fibers for the electrode scaffold, separator membrane, and current collector, along with a biodegradable elastomer encapsulation, the battery design overcomes the reliance on unsustainable transition metal-based active materials and non-biodegradable elastomers used in existing stretchable batteries. Importantly, it addresses the drawback of limited attainable battery capacity, where increasing the active material loading often leads to thicker and stiffer electrodes with poor mechanical properties. The concept decouples the active material loading from the mechanical structure of the electrode, enabling high mass loadings, while retaining a skin-like young's modulus and stretchability. A stretchable ion-selective membrane facilitates the RD process, allowing two separate redox couples, while preventing crossovers. This results in a high-capacity battery cell that is both electrochemically and mechanically stable, engineered from sustainable plant-based materials. Notably, the battery components are biodegradable at the end of their life, addressing concerns of e-waste and resource depletion.

Biodegradation of poly(butylene adipate terephthalate) and poly(vinyl alcohol) within aquatic pathway

Understanding the environmental fate of biodegradable plastics in aquatic systems is crucial, given the alarming amount of plastic waste and microplastic particles transported through aquatic pathways. In particular, there is a need to analyze the biodegradation of commercialized biodegradable plastics upon release from wastewater treatment plants into natural aquatic systems. This study investigates the biodegradation behaviors of poly(butylene adipate terephthalate) (PBAT) and poly(vinyl alcohol) (PVA) in wastewater, freshwater, and seawater. Biodegradation of PBAT and PVA assessed through biochemical oxygen demand (BOD) experiments and microcosm tests revealed that the type of aquatic system governs the biodegradation behaviors of each plastic, with the highest biodegradation rate achieved in wastewater for both PBAT and PVA (25.6 and 32.2 % in 30 d, respectively). Plastic release pathway from wastewater into other aquatic systems simulated by sequential incubation in different microcosms suggested that PBAT exposed to wastewater and freshwater before reaching seawater was more prone to degradation than when directly exposed to seawater. On the other hand, PVA displayed comparable biodegradation rate regardless of whether it was directly exposed to seawater or had passed through other environments beforehand. Metagenome amplicon sequencing of 16S rRNA genes revealed distinct community shifts dependent on the type of plastics in changing environments along the simulated aquatic pathway. Several bacterial species putatively implicated in the biodegradation of PBAT and PVA are discussed. Our findings underscore the significant influence of pollution routes on the biodegradation of PBAT and PVA, highlighting the potential for wastewater treatment to facilitate rapid degradation compared to direct exposure to pristine aquatic environments.

Wound Dressing with Electrospun Core-Shell Nanofibers: From Material Selection to Synthesis

Skin, the largest organ of the human body, accounts for protecting against external injuries and pathogens. Despite possessing inherent self-regeneration capabilities, the repair of skin lesions is a complex and time-consuming process yet vital to preserving its critical physiological functions. The dominant treatment involves the application of a dressing to protect the wound, mitigate the risk of infection, and decrease the likelihood of secondary injuries. Pursuing solutions for accelerating wound healing has resulted in groundbreaking advancements in materials science, from hydrogels and hydrocolloids to foams and micro-/nanofibers. Noting the convenience and flexibility in design, nanofibers merit a high surface-area-to-volume ratio, controlled release of therapeutics, mimicking of the extracellular matrix, and excellent mechanical properties. Core-shell nanofibers bring even further prospects to the realm of wound dressings upon separate compartments with independent functionality, adapted release profiles of bioactive agents, and better moisture management. In this review, we highlight core-shell nanofibers for wound dressing applications featuring a survey on common materials and synthesis methods. Our discussion embodies the wound healing process, optimal wound dressing characteristics, the current organic and inorganic material repertoire for multifunctional core-shell nanofibers, and common techniques to fabricate proper coaxial structures. We also provide an overview of antibacterial nanomaterials with an emphasis on their crystalline structures, properties, and functions. We conclude with an outlook for the potential offered by core-shell nanofibers toward a more advanced design for effective wound healing.

Using a Carbon Quantum Dot Suspension as a New Solvent for Clear Hydrophobic Surface Coating on Hydrophilic PVA Films

Polyvinyl alcohol (PVA) is a popular material used in the packaging industry. However, it is vulnerable to moisture, which can affect its performance and durability. Introducing hydrophobic substances, such as tetraethyl orthosilicate (TEOS) and hexadecyltrimethoxysilane (HDTMS), on the top layer of PVA can help maintain the excellent properties of PVA under high-humidity conditions. The low compatibility of hydrophobic materials with the hydrophilic layers allows them to aggregate more easily. To overcome these issues, we focused on the effects of particle size when increasing the coating suspension's dispersibility. A carbon quantum dot (CQD) suspension is an appropriate novel solvent for hydrophobic TEOS/HDTMS coating suspensions because its particles are small and light and exhibit good dispersibility. The CQD suspension formed a smooth hydrophobic coating on the TEOS/HDTMS materials. Furthermore, the uniformly coated PVA with the CQD suspension exhibited a water contact angle of 110°. The water droplets remained intact without being absorbed, confirming the effectiveness of the surface coating facilitated by CQDs. These results suggested that CQDs improved the dispersibility and enhanced the coating quality of TEOS/HDTMS on PVA. Enhancing the hydrophobicity of PVA is ideal for applications in packaging and other fields.

The effect of MgO nanoparticle on PVA/PEG-based membranes for potential application in wound healing

The interest in wound dressings increased ten years ago. Wound care practitioners can now use interactive/bioactive dressings and tissue-engineered skin substitutes. Several bandages can heal burns, but none can treat all chronic wounds. This study formulates a composite material from 70% polyvinyl alcohol (PVA) and 30% polyethylene glycol (PEG) with 0.2, 0.4, and 0.6 wt% magnesium oxide nanoparticles. This study aims to create a biodegradable wound dressing. A Fourier Transform Infrared (FTIR) study shows that PVA, PEG, and MgO create hydrogen bonding interactions. Hydrophilic characteristics are shown by the polymeric blend's 56.289° contact angle. MgO also lowers the contact angle, making the film more hydrophilic. Hydrophilicity improves film biocompatibility, live cell adhesion, wound healing, and wound dressing degradability. Differential Scanning Calorimeter (DSC) findings suggest the PVA/PEG combination melted at 53.16 °C. However, adding different weight fractions of MgO nanoparticles increased the nanocomposite's melting temperature (Tm). These nanoparticles improve the film's thermal stability, increasing Tm. In addition, MgO nanoparticles in the polymer blend increased tensile strength and elastic modulus. This is due to the blend's strong adherence to the reinforcing phase and MgO nanoparticles' ceramic material which has a great mechanical strength. The combination of 70% PVA + 30% PEG exhibited good antibacterial spatially at 0.2% MgO, according to antibacterial test results.

Polyvinyl alcohol-based capsule shells manufactured by injection molding as ready-to-use moisture barriers for the development of delivery systems

In this work, feasibility of injection molding was demonstrated for manufacturing capsule shells. 600 µm-thick prototypes were successfully molded with pharmaceutical-grade low-viscosity polyvinyl alcohols (PVAs), possibly added with a range of different fillers. They showed reproducible weight and thickness (CV < 2 and 5, respectively), compliant behavior upon piercing (holes diameter analogous to the reference), tunable release performance (immediate and pulsatile), and moisture protection capability. To assess the latter, an on-line method relying on near infrared spectroscopy measurements was set-up and validated. Based on the data collected and considering the versatility IM would provide for product shape/thickness/composition, PVA-based molded shells could help widening the portfolio of ready-to-use capsules, representing an interesting alternative to those commercially available. Indeed, these capsules could be filled with various formulations, even those with stability issues, and intended either for oral administration or for pulmonary delivery via single-dose dry powder inhalers.

Protein-free media for cardiac differentiation of hPSCs in 2000 mL suspension culture

BACKGROUND

Commonly used media for the differentiation of human pluripotent stem cells into cardiomyocytes (hPSC-CMs) contain high concentrations of proteins, in particular albumin, which is prone to quality variations and presents a substantial cost factor, hampering the clinical translation of in vitro-generated cardiomyocytes for heart repair. To overcome these limitations, we have developed chemically defined, entirely protein-free media based on RPMI, supplemented with L-ascorbic acid 2-phosphate (AA-2P) and either the non-ionic surfactant Pluronic F-68 or a specific polyvinyl alcohol (PVA).

METHODS AND RESULTS

Both media compositions enable the efficient, directed differentiation of embryonic and induced hPSCs, matching the cell yields and cardiomyocyte purity ranging from 85 to 99% achieved with the widely used protein-based CDM3 medium. The protein-free differentiation approach was readily up-scaled to a 2000 mL process scale in a fully controlled stirred tank bioreactor in suspension culture, producing > 1.3 × 109 cardiomyocytes in a single process run. Transcriptome analysis, flow cytometry, electrophysiology, and contractile force measurements revealed that the mass-produced cardiomyocytes differentiated in protein-free medium exhibit the expected ventricular-like properties equivalent to the well-established characteristics of CDM3-control cells.

CONCLUSIONS

This study promotes the robustness and upscaling of the cardiomyogenic differentiation process, substantially reduces media costs, and provides an important step toward the clinical translation of hPSC-CMs for heart regeneration.

Recent Advances in Poly(vinyl alcohol)-Based Hydrogels

Poly(vinyl alcohol) (PVA) is a versatile synthetic polymer, used for the design of hydrogels, porous membranes and films. Its solubility in water, film- and hydrogel-forming capabilities, non-toxicity, crystallinity and excellent mechanical properties, chemical inertness and stability towards biological fluids, superior oxygen and gas barrier properties, good printability and availability (relatively low production cost) are the main aspects that make PVA suitable for a variety of applications, from biomedical and pharmaceutical uses to sensing devices, packaging materials or wastewater treatment. However, pure PVA materials present low stability in water, limited flexibility and poor biocompatibility and biodegradability, which restrict its use alone in various applications. PVA mixed with other synthetic polymers or biomolecules (polysaccharides, proteins, peptides, amino acids etc.), as well as with inorganic/organic compounds, generates a wide variety of materials in which PVA's shortcomings are considerably improved, and new functionalities are obtained. Also, PVA's chemical transformation brings new features and opens the door for new and unexpected uses. The present review is focused on recent advances in PVA-based hydrogels.

Design of biodegradable cellulose filtration material with high efficiency and breathability

Using respiratory protective equipment is one of the relevant preventive measures for infectious diseases, including COVID-19, and for various occupational respiratory hazards. Because experienced discomfort may result in a decrease in the utilization of respirators, it is important to enhance the material properties to resolve suboptimal usage. We combined several technologies to produce a filtration material that met requirements set by a cross-disciplinary interview study on the usability of protective equipment. Improved breathability, environmental sustainability, and comfort of the material were achieved by electrospinning poly(ethylene oxide) (PEO) nanofibers on a thin foam-formed fabric from regenerated cellulose fibers. The high filtration efficiency of sub-micron-sized diethylhexyl sebacate (DEHS) aerosol particles resulted from the small mean segment length of 0.35 μm of the nanofiber network. For a particle diameter of 0.6 μm, the filtration efficiency of a single PEO layer varied in the range of 80-97 % depending on the coat weight. The corresponding pressure drop had the level of 20-90 Pa for the airflow velocity of 5.3 cm/s. Using a multilayer structure, a very high filtration efficiency of 99.5 % was obtained with only a slightly higher pressure drop. This opens a route toward designing sustainable personal protective media with improved user experience.

Boosting Contact Electrification by Amorphous Polyvinyl Alcohol Endowing Improved Contact Adhesion and Electrochemical Capacitance

Ion conductive hydrogels are relevant components in wearable, biocompatible, and biodegradable electronics. Polyvinyl-alcohol (PVA) homopolymer is often the favored choice for integration into supercapacitors and energy harvesters as in sustainable triboelectric nanogenerators (TENGs). However, to further improve hydrogel-based TENGs, a deeper understanding of the impact of their composition and structure on devices performance is necessary. Here, it is shown how ionic hydrogels based on an amorphous-PVA (a-PVA) allow to fabricate TENGs that outperform the one based on the homopolymer. When used as tribomaterial, the Li-doped a-PVA allows to achieve a twofold higher pressure sensitivity compared to PVA, and to develop a conformable e-skin. When used as an ionic conductor encased in an elastomeric tribomaterial, 100 mW cm-2 average power is obtained, providing 25% power increase compared to PVA. At the origin of such enhancement is the increased softness, stronger adhesive contact, higher ionic mobility (> 3,5-fold increase), and long-term stability achieved with Li-doped a-PVA. These improvements are attributed to the high density of hydroxyl groups and amorphous structure present in the a-PVA, enabling a strong binding to water molecules. This work discloses novel insights on those parameters allowing to develop easy-processable, stable, and highly conductive hydrogels for integration in conformable, soft, and biocompatible TENGs.

Advances in Polyvinyl Alcohol-Based Membranes for Fuel Cells: A Comprehensive Review on Types, Synthesis, Modifications, and Performance Optimization

Fuel cell technology is at the forefront of sustainable energy solutions, and polyvinyl alcohol (PVA) membranes play an important role in improving performance. This article thoroughly investigates the various varieties of PVA membranes, their production processes, and the numerous modification tactics used to solve inherent problems. Various methods were investigated, including chemical changes, composite blending, and the introduction of nanocomposites. The factors impacting PVA membranes, such as proton conductivity, thermal stability, and selectivity, were investigated to provide comprehensive knowledge. By combining various research threads, this review aims to completely investigate the current state of PVA membranes in fuel cell applications, providing significant insights for both academic researchers and industry practitioners interested in efficient and sustainable energy conversion technologies. The transition from traditional materials such as Nafion to PVA membranes has been prompted by limitations associated with the former, such as complex synthesis procedures, reduced ionic conductivity at elevated temperatures, and prohibitively high costs, which have hampered their widespread adoption. As a result, modern research efforts are increasingly focused on the creation of alternative membranes that can compete with conventional technical efficacy and economic viability in the context of fuel cell technologies.

Unified Approach to Deamination and Deoxygenation Through Isonitrile Hydrodecyanation: A Combined Experimental and Computational Investigation

Herein, we describe a general hydrodefunctionalization protocol of alcohols and amines through a common isonitrile intermediate. To cleave the relatively inert C-NC bond, we leveraged dual hydrogen atom transfer (HAT) and photoredox catalysis to generate a nucleophilic boryl radical, which readily forms an imidoyl radical intermediate from the isonitrile. Rapid β-scission then accomplishes defunctionalization. This method has been applied to the hydrodefunctionalization of both amine and alcohol-containing pharmaceuticals, natural products, and biomolecules. We extended this approach to the reduction of carbonyls and olefins to their saturated counterparts, as well as the hydrodecyanation of alkyl nitriles. Both experimental and computational studies demonstrate a facile β-scission of the imidoyl radical, and reconcile differences in reactivity between nitriles and isonitriles within our protocol.

Effect of Polymer and Cell Membrane Coatings on Theranostic Applications of Nanoparticles: A Review

The recent decade has witnessed a remarkable surge in the field of nanoparticles, from their synthesis, characterization, and functionalization to diverse applications. At the nanoscale, these particles exhibit distinct physicochemical properties compared to their bulk counterparts, enabling a multitude of applications spanning energy, catalysis, environmental remediation, biomedicine, and beyond. This review focuses on specific nanoparticle categories, including magnetic, gold, silver, and quantum dots (QDs), as well as hybrid variants, specifically tailored for biomedical applications. A comprehensive review and comparison of prevalent chemical, physical, and biological synthesis methods are presented. To enhance biocompatibility and colloidal stability, and facilitate surface modification and cargo/agent loading, nanoparticle surfaces are coated with different synthetic polymers and very recently, cell membrane coatings. The utilization of polymer- or cell membrane-coated nanoparticles opens a wide variety of biomedical applications such as magnetic resonance imaging (MRI), hyperthermia, photothermia, sample enrichment, bioassays, drug delivery, etc. With this review, the goal is to provide a comprehensive toolbox of insights into polymer or cell membrane-coated nanoparticles and their biomedical applications, while also addressing the challenges involved in translating such nanoparticles from laboratory benchtops to in vitro and in vivo applications. Furthermore, perspectives on future trends and developments in this rapidly evolving domain are provided.

Poly(vinyl alcohol)s and Their Glycoderivatives as Efficient Shell-Builders of Nanocapsules by Nanoprecipitation

Poly(vinyl alcohol)s (PVAs) are very popular dispersants for the construction of colloids and common shell-constituents of microcapsules but remain mostly unexplored as building blocks for the design of nanocapsules through nanoprecipitation or other processes. Herein, we first show that model commercial PVAs and oils can be concomitantly engaged in solvent-shifting procedures to give rise to oil-filled nanocapsules in one step. Next, we report the synthesis of precisely defined water-soluble glyco-PVAs by reversible addition-fragmentation chain transfer (RAFT) copolymerization of 6-O-vinyladipoyl-d-glucopyranose and vinyl chloroacetate and selective alcoholysis reactions. We finally demonstrate that these glycopolymers are excellent candidates for the straightforward conception of oil- and drug-filled, surface- and/or core-tagged, stealth, and degradable nanocapsules by nanoprecipitation.

Citrus flavonoids-loaded chitosan derivatives-route nanofilm as drug delivery systems for cutaneous wound healing

This study focuses on creating new forms of biomimetic nanofiber composites by combining copolymerizing and electrospinning approaches in the field of nanomedicine. The process involved utilizing the melt polymerization of proline (Pr) and hydroxyl proline (Hyp) to synthesize polymers based on Pr (PPE) and Hyp (PHPE). These polymers were then used in a grafting copolymerization process with chitosan (CS) to produce PHPC (1560 ± 81.08 KDa). A novel electrospun nanofiber scaffold was then produced using PHPC and/or CS, hyaluronic acid, polyvinyl alcohol, and naringenin (NR) as a loading drug. Finally, Mouse Dermal Fibroblast (MDF) cells were introduced to the wound dressing and assessed their therapeutic potential for wound healing in rats. The scaffolds were characterized by FTIR, NMR, DSC, and SEM analysis, which confirmed the amino acid grafting, loading drug, and porous and nanofibrous structures (>225 nm). The results showed that the PHPC-based scaffolds were more effective for swelling/absorption of wound secretions, had more elasticity/elongation, faster drug release, more MDF-cytocompatibility, and antibacterial activity against multidrug-resistant S. aureus compared to CS-based scaffolds. The in vivo studies showed that NR in combination with MDF can accelerate cell migration/proliferation, and remodeling phases of wound healing in both PHPC/CS-based scaffolds. Moreover, PHPC-based scaffolds promote collagen content, and better wound contraction, epithelialization, and neovascularization than CS-based, showing potential as wound-dressing.

Dual Semi-Interpenetrating Networks of Water-Soluble Macromolecules and Supramolecular Polymer-like Chains: The Role of Component Interactions

Dual networks formed by entangled polymer chains and wormlike surfactant micelles have attracted increasing interest in their application as thickeners in various fields since they combine the advantages of both polymer- and surfactant-based fluids. In particular, such polymer-surfactant mixtures are of great interest as novel hydraulic fracturing fluids with enhanced properties. In this study, we demonstrated the effect of the chemical composition of an uncharged polymer poly(vinyl alcohol) (PVA) and pH on the rheological properties and structure of its mixtures with a cationic surfactant erucyl bis(hydroxyethyl)methylammonium chloride already exploited in fracturing operations. Using a combination of several complementary techniques (rheometry, cryo-transmission electron microscopy, small-angle neutron scattering, and nuclear magnetic resonance spectroscopy), we showed that a small number of residual acetate groups (2-12.7 mol%) in PVA could significantly reduce the viscosity of the mixed system. This result was attributed to the incorporation of acetate groups in the corona of the micellar aggregates, decreasing the molecular packing parameter and thereby inducing the shortening of worm-like micelles. When these groups are removed by hydrolysis at a pH higher than 7, viscosity increases by five orders of magnitude due to the growth of worm-like micelles in length. The findings of this study create pathways for the development of dual semi-interpenetrating polymer-micellar networks, which are highly desired by the petroleum industry.

Lignin-derived carbon quantum dot/PVA films for totally blocking UV and high-energy blue light

Excessive exposure to UV and high-energy blue light (HEBL) can cause fatal eye and skin injuries. As a result, it is crucial to protect our bodies from UV and HEBL radiation. To achieve complete blocking of UV and HEBL, we developed a lignin-derived carbon quantum dot (L-CQD)/polyvinyl alcohol (PVA) film. L-CQD was synthesized from lignin, a waste woody biomass, and then blended with a PVA matrix to create a flexible L-CQD/PVA film. Thanks to simultaneous UV and HEBL absorption characteristics and bright color of L-CQD, the PVA film with 0.375 wt% L-CQD demonstrated outstanding blocking efficiency: 100 % in UV-C, UV-B, and UV-A, and at least 99.9 % in HEBL. It also exhibited a 44 % increase in lightness and a 12 % enhancement in transparency compared to lignin/PVA film. The film's ability to block UV and HEBL was further demonstrated by reducing >40 % UV-induced ROS formation in both cancerous and normal cell lines (Hs 294T, HeLa, CCD-986sk, and L929), as well as by blocking blue laser diode (LD) and LED. Since the L-CQD/PVA film is simple to produce, environmentally friendly, flexible, and thermally stable, it is suitable for use as a protective coating against sunlight and harmful emissions from IT devices.

Transient N-GQDs/PVA nanocomposite thin film for memristor application

In recent years quantum dot (QDs) based resistive switching devices(memristors) have gained a lot of attention. Here we report the resistive switching behavior of nitrogen-doped graphene quantum dots/Polyvinyl alcohol (N-GQDs/PVA) degradable nanocomposite thin film with different weight percentages (wt.%) of N-GQDs. The memristor device was fabricated by a simple spin coating technique. It was found that 1 wt% N-GQDs/PVA device shows a prominent resistive switching phenomenon with good cyclic stability, high on/off ratio of ~102and retention time of ∼104s. From a detailed experimental study of band structure, we conclude that memristive behavior originates from the space charge controlled conduction (SCLC) mechanism. Further transient property of built memristive device was studied. Within three minutes of being submerged in distilled water, the fabricated memory device was destroyed. This phenomenon facilitates the usage of fabricated memristor devices to develop memory devices for military and security purposes.

Effect of Starch and Paperboard Reinforcing Structures on Insulative Fiber Foam Composites

Single-use plastic foams are used extensively as interior packaging to insulate and protect items during shipment but have come under increasing scrutiny due to the volume sent to landfills and their negative impact on the environment. Insulative compression molded cellulose fiber foams could be a viable alternative, but they do not have the mechanical strength of plastic foams. To address this issue, a novel approach was used that combined the insulative properties of cellulose fiber foams, a binder (starch), and three different reinforcing paperboard elements (angular, cylindrical, and grid) to make low-density foam composites with excellent mechanical strength. Compression molded foams and composites had a consistent thickness and a smooth, flat finish. Respirometry tests showed the fiber foams mineralized in the range of 37 to 49% over a 46 d testing period. All of the samples had relatively low density (Dd) and thermal conductivity (TC). The Dd of samples ranged from 33.1 to 64.9 kg/m3, and TC ranged from 0.039 to 0.049 W/mk. The addition of starch to the fiber foam (FF+S) and composites not only increased Dd, drying time (Td), and TC by an average of 18%, 55%, and 5.5%, respectively, but also dramatically increased the mechanical strength. The FF+S foam and paperboard composites had 240% and 350% higher average flexural strength (σfM) and modulus (Ef), respectively, than the FF-S composites. The FF-S grid composite and all the FF+S foam and composite samples had equal or higher σfM than EPS foam. Additionally, FF+S foam and paperboard composites had 187% and 354% higher average compression strength (CS) and modulus (Ec), respectively, than the FF-S foam and composites. All the paperboard composites for both FF+S and FF-S samples had comparable or higher CS, but only the FF+S cylinder and grid samples had greater toughness (Ωc) than EPS foam. Fiber foams and foam composites are compatible with existing paper recycling streams and show promise as a biodegradable, insulative alternative to EPS foam internal packaging.

Overview of processed excipients in ocular drug delivery: Opportunities so far and bottlenecks

Ocular drug delivery presents a unique set of challenges owing to the complex anatomy and physiology of the eye. Processed excipients have emerged as crucial components in overcoming these challenges and improving the efficacy and safety of ocular drug delivery systems. This comprehensive overview examines the opportunities that processed excipients offer in enhancing drug delivery to the eye. By analyzing the current landscape, this review highlights the successful applications of processed excipients, such as micro- and nano-formulations, sustained-release systems, and targeted delivery strategies. Furthermore, this article delves into the bottlenecks that have impeded the widespread adoption of these excipients, including formulation stability, biocompatibility, regulatory constraints, and cost-effectiveness. Through a critical evaluation of existing research and industry practices, this review aims to provide insights into the potential avenues for innovation and development in ocular drug delivery, with a focus on addressing the existing challenges associated with processed excipients. This synthesis contributes to a deeper understanding of the promising role of processed excipients in improving ocular drug delivery systems and encourages further research and development in this rapidly evolving field.

Pain-free oral delivery of biologic drugs using intestinal peristalsis-actuated microneedle robots

Biologic drugs hold immense promise for medical treatments, but their oral delivery remains a daunting challenge due to the harsh digestive environment and restricted gastrointestinal absorption. Here, inspired by the porcupinefish's ability to inflate itself and deploy its spines for defense, we proposed an intestinal microneedle robot designed to absorb intestinal fluids for rapid inflation and inject drug-loaded microneedles into the insensate intestinal wall for drug delivery. Upon reaching the equilibrium volume, the microneedle robot leverages rhythmic peristaltic contraction for mucosa penetration. The robot's barbed microneedles can then detach from its body during peristaltic relaxation and retain in the mucosa for drug releasing. Extensive in vivo experiments involving 14 minipigs confirmed the effectiveness of the intestinal peristalsis for microrobot actuation and demonstrated comparable insulin delivery efficacy to subcutaneous injection. The ingestible peristalsis-actuated microneedle robots may transform the oral administration of biologic drugs that primary relies on parenteral injection currently.

Exploring the potential of a newly developed pectin-chitosan polyelectrolyte composite on the surface of commercially pure titanium for dental implants

Pectin and chitosan are natural polysaccharides obtained from fruit peels and exoskeletons of crustaceans and insects. They are safe for usage in food products and are renewable and biocompatible. They have further applications as wound dressings, body fat reduction, tissue engineering, and auxiliary agents in drug delivery systems. The healing process is usually long and painful. Adding a new material such as a pectin-chitosan composite to the implant surface or body would create unique biological responses to accelerate healing and delivery of target-specific medication at the implant site. The present study utilized the electrospraying process to create pectin-chitosan polyelectrolyte composite (PCPC) coatings with various ratios of 1:1, 2:1, 1:2, 1:3, and 3:1 on commercially pure titanium substrates. By means of FESEM, AFM, wettability, cross-cut adhesion, and microhardness were assessed the PCPC coatings' physical and mechanical properties. Subsequently, the antibacterial properties of the coating composite were assessed. AFM analysis revealed higher surface roughness for group 5 and homogenous coating for group 1. Group 3 showed the lowest water contact angle of 66.7° and all PCPC coatings had significantly higher Vickers hardness values compared to the control uncoated CpTi samples. Groups 3 and 4 showed the best adhesion of the PCPC to the titanium substrates. Groups 3, 4, and 5 showed antibacterial properties with a high zone of inhibitions compared to the control. The PCPC coating's characteristics can be significantly impacted by using certain pectin-chitosan ratios. Groups 3 (1:2) and 4 (1:3) showed remarkable morphological and mechanical properties with better surface roughness, greater surface strength, improved hydrophilicity, improved adhesion to the substrate surface, and additionally demonstrated significant antibacterial properties. According to the accomplished in vitro study outcomes, these particular PCPC ratios can be considered as an efficient coating for titanium dental implants.

Solid Dispersion Incorporated into Dissolving Microneedles for Improved Antifungal Activity of Amphotericin B: In Vivo Study in a Fungal Keratitis Model

Fungal keratitis (FK) is a fungal infection of the cornea, which is part of the eye and causes corneal ulcers and an increased risk of permanent blindness, which is often found in Candida albicans species. Amphotericin B (AMB), which is a group of polyenes as the first-line treatment of FK, is effective in annihilating C. albicans. However, AMB preparations such as eye drops and ointments have major drawbacks, for instance, requiring more frequent administrations, loss of the drug by the drainage process, and rapid elimination in the precornea, which result in low bioavailability of the drug. An ocular dissolving microneedle containing the solid dispersion amphotericin B (DMN-SD-AMB) had been developed using a mixture of poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) polymers, while the solid dispersion AMB (SD-AMB) was contained in the needle as a drug. This study aims to determine the most optimal and safest DMN-SD-AMB formula for the treatment of FK in the eye as well as a solution to overcome the low bioavailability of AMB eye drops and ointment preparations. SD-AMB had been successfully developed, which was characterized by increased antifungal activity and drug release in vitro compared to other treatments. Furthermore, DMN-SD-AMB studies had also been successfully performed with the best formulation, which exhibited the best ex vivo corneal permeation profile and antifungal activity as well as being safe from eye irritation. In addition, an in vivo antifungal activity using a rabbit infection model shows that the number of fungal colonies was 0.98 ± 0.11 log10 CFU/mL (F3), 5.76 ± 0.32 log10 CFU/mL (AMB eye drops), 4.01 ± 0.28 log10 CFU/mL (AMB ointments), and 9.09 ± 0.65 log10 CFU/mL (control), which differed significantly (p < 0.05). All of these results evidence that DMN-SD-AMB is a new approach to developing intraocular preparations for the treatment of FK.

Designing biodegradable alternatives to commodity polymers

The development and widespread adoption of commodity polymers changed societal landscapes on a global scale. Without the everyday materials used in packaging, textiles, construction and medicine, our lives would be unrecognisable. Through decades of use, however, the environmental impact of waste plastics has become grimly apparent, leading to sustained pressure from environmentalists, consumers and scientists to deliver replacement materials. The need to reduce the environmental impact of commodity polymers is beyond question, yet the reality of replacing these ubiquitous materials with sustainable alternatives is complex. In this tutorial review, we will explore the concepts of sustainable design and biodegradability, as applied to the design of synthetic polymers intended for use at scale. We will provide an overview of the potential biodegradation pathways available to polymers in different environments, and highlight the importance of considering these pathways when designing new materials. We will identify gaps in our collective understanding of the production, use and fate of biodegradable polymers: from identifying appropriate feedstock materials, to considering changes needed to production and recycling practices, and to improving our understanding of the environmental fate of the materials we produce. We will discuss the current standard methods for the determination of biodegradability, where lengthy experimental timescales often frustrate the development of new materials, and highlight the need to develop better tools and models to assess the degradation rate of polymers in different environments.

Versatile and User-Friendly Anti-infective Hydrogel for Effective Wound Healing

Wound dressings play a crucial role in facilitating optimal wound healing and protecting against microbial infections. However, existing commercial options often fall short in addressing chronic infections due to antibiotic resistance and the limited spectrum of activity against both Gram-positive and Gram-negative bacteria frequently encountered at wound sites. Additionally, complex fabrication processes and cumbersome administration strategies pose challenges for cost-effective wound dressing development. Consequently, there is a pressing need to explore easily engineered biocompatible biomaterials as alternative solutions to combat these challenging wound infections. In this study, we present the development of an anti-infective hydrogel, P-BAC (polymeric bactericidal hydrogel), which exhibits simple administration and promotes efficient wound healing. P-BAC is synthesized via a one-step fabrication method that involves the noncovalent cross-linking of poly(vinyl alcohol), N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride-AgCl nanocomposite, and proline. Remarkably, P-BAC demonstrates broad-spectrum antibacterial activity against both planktonic and stationary cells of clinically isolated Gram-positive and Gram-negative bacteria, resulting in a significant reduction of bacterial load (5-7 log reduction). Moreover, P-BAC exhibits excellent efficacy in eradicating bacterial cells within biofilm matrices (>95% reduction). In vivo experiments reveal that P-BAC accelerates wound healing by stimulating rapid collagen deposition at the wound site and effectively inactivates ∼95% of Pseudomonas aeruginosa cells. Importantly, the shear-thinning property of P-BAC simplifies the administration process, enhancing its practicality and usability. Taken together, our findings demonstrate the potential of this easily administrable hydrogel as a versatile solution for effective wound healing with potent anti-infective properties. The developed hydrogel holds promise for applications in diverse healthcare settings, addressing the critical need for improved wound dressing materials.

Dissolving and Swelling Hydrogel-Based Microneedles: An Overview of Their Materials, Fabrication, Characterization Methods, and Challenges

Polymeric hydrogels are a complex class of materials with one common feature-the ability to form three-dimensional networks capable of imbibing large amounts of water or biological fluids without being dissolved, acting as self-sustained containers for various purposes, including pharmaceutical and biomedical applications. Transdermal pharmaceutical microneedles are a pain-free drug delivery system that continues on the path to widespread adoption-regulatory guidelines are on the horizon, and investments in the field continue to grow annually. Recently, hydrogels have generated interest in the field of transdermal microneedles due to their tunable properties, allowing them to be exploited as delivery systems and extraction tools. As hydrogel microneedles are a new emerging technology, their fabrication faces various challenges that must be resolved for them to redeem themselves as a viable pharmaceutical option. This article discusses hydrogel microneedles from a material perspective, regardless of their mechanism of action. It cites the recent advances in their formulation, presents relevant fabrication and characterization methods, and discusses manufacturing and regulatory challenges facing these emerging technologies before their approval.

Degradation of polyvinyl alcohol (PVA) in neutral conditions based on copper-manganese bimetallic catalyst

There have been many studies on the degradation of polyvinyl alcohol (PVA) by the Fenton-like method, but the narrow acid-base (pH) range, poor degradation effect, and time-consuming of the Fenton-like method limit its development. Therefore, to improve the shortcomings of the Fenton-like method, the study aimed to synthesize copper-manganese bimetal oxide loaded catalysts (MnCuO@γ-Al2O3) through the impregnation calcination method, and its potential to activate hydrogen peroxide (H2O2) for the degradation of PVA was evaluated. The X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) characterizations revealed the chemical composition, structure and morphology of the prepared MnCuO@γ-Al2O3, furthermore the synergistic mechanism was proposed. Results indicated that copper and manganese could successfully attach to γ-Al2O3 and reduce the specific surface area of γ-Al2O3, promoting the transformation of multivalent metals and the generation of oxygen vacancies. In addition, comparative experiments demonstrated that the PVA removal efficiency was significantly improved at the catalyst calcination temperature of 500 °C, reaction temperature of 70 °C, H2O2 dosage of 125 [Formula: see text], and catalyst dosage of 625 [Formula: see text] and more than 96% of PVA was removed within 20 min in neutral conditions. Lastly, four catalyst cycle degradation experiments of PVA were carried out, and the degradation effect could reach more than 96% in a certain time.

Effect of Polyethylene Glycol Methyl Ether Methacrylate on the Biodegradability of Polyvinyl Alcohol/Starch Blend Films

Blend copolymers (PVA/S) were grafted with polyethylene glycol methyl methacrylate (PEGMA) with different ratios. Potassium persulfate was used as an initiator. The blend copolymer (PVA/S) was created by combining poly(vinyl alcohol) (PVA) with starch (S) in various ratios. The main idea was to study the effect of different ratios of the used raw materials on the biodegradability of plastic films. The resulting polymers (PVA/S/PEGMA) were analyzed using FTIR spectroscopy to investigate the hydrogen bond interaction between PVA, S, and PEGMA in the mixtures. TGA and SEM analyses were used to characterize the polymers (PVA/S/AA). The biodegradability and mechanical properties of the PVA/S/PEGMA blend films were evaluated. The findings revealed that the mechanical properties of the blend films are highly influenced by PEGMA. The time of degradation of the films immersed in soil and Coca-Cola increases as the contents of PVA and S and the molecular weight (MW) of PEGMA increase in the terpolymer. The M8 sample (PVA/S/PEGMA in the ratio of 3:1:2, respectively) with a MW of 950 g/mol produced the lowest elongation at break (67.5%), whereas M1 (PVA/S/PEGMA in the ratio of 1:1:1, respectively) with a MW of 300 g/mol produced the most (150%). The film's tensile strength and elongation at break were improved by grafting PEGMA onto the blending polymer (PAV-b-S). Tg and Tm increased when the PEGMA MW increased from 300 to 950. Tg (48.4 °C) and Tm (190.9 °C) were the lowest in M1 (300), while Tg (84.8 °C) and Tm (190.9 °C) were greatest in M1 (950) at 209.3 °C. The increased chain and molecular weight of PEGMA account for the increase in Tg and Tm of the copolymers.

Polyvinyl alcohol coating releasing fungal blastospores improves kill effect of attract-and-kill beads

Polyvinyl alcohol (PVA) is a biodegradable, water-soluble polymer with excellent film forming properties, commonly studied or used as tablet coating, food packaging or controlled release fertilizers. Attract-and-kill (AK) beads are sustainable, microbial alternatives to synthetic soil insecticides, whose onset of lethal effect largely depend on how fast the encapsulated entomopathogenic fungus forms virulent conidia. Therefore, the objective of this study was to develop a water-soluble coating accelerating the kill effect of AK beads by immediately releasing virulent Metarhizium brunneum CB15-III blastospores. We assessed three PVA types (PVA 4-88, 8-88, 10-98) which differed in their degree of hydrolysis or molecular weight for their ability to release viable blastospores from thin films after drying at 60-40 °C, and examined how polyethylene glycol and soy-lecithin impact the blastospore survival. Finally, we evaluated the effectiveness of coated AK beads in a bioassay against Tenebrio molitor larvae. The blastospore release rate quadrupled within the first 5 min with decreasing molecular weight and degree of hydrolysis, with PVA 4-88 releasing 79 ± 19% blastospores. Polyethylene glycol and soy-lecithin significantly increased the blastospore survival to 18-28% for all three PVA types. Coated beads exhibited a uniform, 22.4 ± 7.3 µm thin coating layer, with embedded blastospores, as confirmed by scanning electron microscopy. The blastospore coating increased the mortality rate of T. molitor larvae over uncoated AK beads, decreasing the median lethal time from 10 to 6 days. Consequently, the blastospore coating accelerated the kill effect of regular AK beads. These findings pave the way to enhanced pest control efficacy from coated systems such as beads or seeds.

Laminar Biomaterial Composite of PVA Cryogel with Amnion as Potential Wound Dressing

Gel dressings, composed of polymers both natural and synthetic, are successfully used in the treatment of burn wounds. They protect the burn wound site against adverse external factors, ensure an adequate level of tissue hydration, have soothing and pain-relieving properties, and also support the healing process and reduce the risk of pathological scars. Another promising material that can be used in the wound-healing process is an amnion membrane. Due to its valuable properties such as protecting the body against bacterial infections and permeability to nutrition, it has found usage in different brands of medicine. In this work, we have combined the beneficial properties of hydrogels and amnion in order to make the laminar dressing that may serve for wound healing. For that purpose, the physically crosslinked cryogel of poly(vinyl alcohol) (PVA) was covered with an amnion membrane. Subsequently, gamma irradiation was performed, leading to the simultaneous internal crosslinking of the hydrogel, its permanent bonding with the amnion, and dressing sterilization. The physicochemical properties of the dressing including gel fraction, swelling, and hardness were studied. Biological tests such as the MTT assay, antimicrobial activity, and histopathological examination confirmed that the obtained material constituted a promising candidate for further, more in-depth studies aiming at wound dressing application.

Fluorescent-based biodegradable microneedle sensor array for tether-free continuous glucose monitoring with smartphone application

Continuous glucose monitoring (CGM) allows patients with diabetes to manage critical disease effectively and autonomously and prevent exacerbation. A painless, wireless, compact, and minimally invasive device that can provide CGM is essential for monitoring the health conditions of freely moving patients with diabetes. Here, we propose a glucose-responsive fluorescence-based highly sensitive biodegradable microneedle CGM system. These ultrathin and ultralight microneedle sensor arrays continuously and precisely monitored glucose concentration in the interstitial fluid with minimally invasive, pain-free, wound-free, and skin inflammation-free outcomes at various locations and thicknesses of the skin. Bioresorbability in the body without a need for device removal after use was a key characteristic of the microneedle glucose sensor. We demonstrated the potential long-term use of the bioresorbable device by applying the tether-free CGM system, thus confirming the successful detection of glucose levels based on changes in fluorescence intensity. In addition, this microneedle glucose sensor with a user-friendly designed home diagnosis system using mobile applications and portable accessories offers an advance in CGM and its applicability to other bioresorbable, wearable, and implantable monitoring device technology.

Carboxymethyl cellulose/poly(vinyl alcohol) blended films reinforced by buckypapers of carbon nanotubes and 2D material (MoS2): Enhancing mechanical strength, toughness, and barrier properties

Plastic waste is one cause of climate change. To solve this problem, packaging films are increasingly produced from biodegradable polymers. Eco-friendly carboxymethyl cellulose and its blends have been developed for such a solution. Herein, a unique strategy is demonstrated to improve the mechanical and barrier properties of carboxymethyl cellulose/poly(vinyl alcohol) (CMC/PVA) blended films for the packaging of nonfood dried products. The blended films were impregnated with buckypapers containing different combinations of multiwalled carbon nanotubes, two-dimensional molybdenum disulfide (2D MoS₂) nanoplatelets, and helical carbon nanotubes (HCNTs). Compared to the blend, the polymer composite films exhibit significant increases in tensile strength (~105 %, from 25.53 to 52.41 MPa), Young's modulus (~297 %, from 155.48 to 617.48 MPa), and toughness (~46 %, from 6.69 to 9.75 MJ m^-3). Polymer composite films containing HCNTs in buckypapers offer the highest toughness. For barrier properties, the polymer composite films are opaque. The water vapor transmission rate of the blended films decreases (~52 %, from 13.09 to 6.25 g h^-1 m^-2). Moreover, the maximum thermal-degradation temperature of the blend rises from 296 to 301 °C, especially for the polymer composite films with buckypapers containing MoS₂ nanosheets that contribute to the barrier effect for both water vapor and thermal-decomposition gas molecules.

Novel Pectin Binder for Satelliting Carbides to H13 Tool Steel for PBF-LB Processing

In order to enhance the range of processable alloys of laser-based powder bed fusion, reinforced alloys have gained focus. Satelliting is a recently introduced method for adding fine additives to larger parent powder particles using a bonding agent. Satellited particles prevent a local demixing due to size and density effects of the powder. In this study, the satelliting method is used for the additivation of Cr₃C₂ to AISI H13 tool steel via a functional polymer binder (pectin). The investigation includes a detailed binder analysis and comparison to the previously used PVA binder as well as processability in PBF-LB and the microstructure of the alloy. The results reveal that pectin is a suitable binder for the satelliting process and the demixing behavior that appears when using a simple powder blend can be significantly reduced. However, the alloy is enriched with carbon, which results in austenite being retained. Thus, in future research, a reduced binder content will be investigated.

Tannic-Acid-Enriched Poly(vinyl alcohol) Nanofibrous Membrane as a UV-Shie lding and Antibacterial Face Mask Filter Material

Face masks are increasingly important in the battle against infectious diseases and air pollution. Nanofibrous membranes (NFMs) are promising filter layers for removing particulate matter (PM) without restricting air permeability. In this study, tannic-acid-enriched poly(vinyl alcohol) (PVA-TA) NFMs were fabricated by electrospinning PVA solutions containing large amounts of tannic acid (TA), a multifunctional polyphenol compound. We were able to prepare uniform electrospinning solution without coacervate formation by inhibiting the robust hydrogen bonding between PVA and TA. Notably, the NFM maintained its fibrous structure even under moist conditions after heat treatment without the use of a cross-linking agent. Further, the mechanical strength and thermal stability of the PVA NFM were improved by the introduction of TA. The functional PVA NFM with a high TA content showed excellent UV-shielding (UV-A: 95.7%, UV-B: 100%) and antibacterial activity against Escherichia coli (inhibition zone: 8.7 ± 1.2 mm) and Staphylococcus aureus (inhibition zone: 13.7 ± 0.6 mm). Moreover, the particle filtration efficiency of the PVA-TA NFM for PM_0.6 particles was 97.7% at 32 L min^-1 and 99.5% at 85 L min^-1, indicating excellent filtration performance and a low pressure drop. Therefore, the TA-enriched PVA NFM is a promising mask filter layer material with excellent UV-blocking and antibacterial properties and has the potential for various practical applications.

Hydrogel-Inducing Graphene-Oxide-Derived Core–Shell Fiber Composite for Antibacterial Wound Dressing

The study reveals the polymer–crosslinker interactions and functionality of hydrophilic nanofibers for antibacterial wound coatings. Coaxial electrospinning leverages a drug encapsulation protocol for a core–shell fiber composite with a core derived from polyvinyl alcohol and polyethylene glycol with amorphous silica (PVA-PEG-SiO2), and a shell originating from polyvinyl alcohol and graphene oxide (PVA-GO). Crosslinking with GO and SiO2 initiates the hydrogel transition for the fiber composite upon contact with moisture, which aims to optimize the drug release. The effect of hydrogel-inducing additives on the drug kinetics is evaluated in the case of chlorhexidine digluconate (CHX) encapsulation in the core of core–shell fiber composite PVA-PEG-SiO2-1x-CHX@PVA-GO. The release rate is assessed with the zero, first-order, Higuchi, and Korsmeyer–Peppas kinetic models, where the inclusion of crosslinking silica provides a longer degradation and release rate. CHX medicated core–shell composite provides sustainable antibacterial activity against Staphylococcus aureus.

Intermolecular interactions between starch and polyvinyl alcohol for improving mechanical properties of starch-based straws

Starch/polyvinyl alcohol (PVA) degradable straws with different PVA contents were prepared by the twin-screw extrusion method. The results showed that the starch/PVA straws with 40 % PVA (PS4) had the highest dispersion uniformity of starch and PVA to achieve the best compatibility, and the compatibility size was below the micron level. Molecular interactions between starch and 40 % polyvinyl alcohol reached the highest due to the highest strength of hydrogen bonds, hence resulting in the highest texture densities. Consequently, the largest compatibility and molecular interactions significantly improved the mechanical properties and water resistance of PS4. Compared to the starch/PVA straw with 0 % PVA (PS0), swelling volume of PS4 decreased by 45.5 % (4 °C) and 65.2 % (70 °C), respectively. After soaking, the diameter strength increased by 540.1 % (4 °C, 1 h) and 638.7 % (70 °C, 15 min), respectively. Water absorption decreased by 45.3 % (4 °C, 30 min) and 27.6 % (70 °C, 30 min).

Polymer-based particles against pathogenic fungi: A non-uptake delivery of compounds

The therapy of life-threatening fungal infections is limited and needs urgent improvement. This is in part due to toxic side effects of clinically used antifungal compounds or their limited delivery to fungal structures. Until today, it is a matter of debate how drugs or drug-delivery systems can efficiently reach the intracellular lumen of fungal cells and how this can be improved. Here, we addressed both questions by applying two different polymeric particles for delivery of compounds. Their formulation was based on two biocompatible polymers, i.e., poly(lactic-co-glycolic acid)_50:50 and poly(methyl methacrylate-stat-methacrylic acid)_90:10 yielding particles with hydrodynamic diameters ranging from 100 to 300 nm. The polymers were covalently labeled with the fluorescent dye DY-550 to monitor the interaction between particles and fungi by confocal laser scanning microscopy. Furthermore, the fluorescent dye coumarin-6 and the antifungal drug itraconazole were successfully encapsulated in particles to study the fate of both the cargo and the particle when interacting with the clinically most important human-pathogenic fungi Aspergillus fumigatus, A. terreus, Candida albicans, and Cryptococcus neoformans. While the polymers were exclusively located on the fungal surface, the encapsulated cargo was efficiently transported into fungal hyphae, indicated by increased intracellular fluorescence signals due to coumarin-6. In accordance with this finding, compared to the pristine drug a reduced minimal inhibitory concentration for itraconazole was determined, when it was encapsulated. Together, the herein used polymeric particles were not internalized by pathogenic fungi but were able to efficiently deliver hydrophobic cargos into fungal cells.

Glucose-Responsive Microparticle-Loaded Dissolving Microneedles for Selective Delivery of Metformin: A Proof-of-Concept Study

Diabetes mellitus (DM) is a metabolic disorder that is one of the most common health problems in the world, primarily type 2 DM (T2DM). Metformin (MTF), as the first-line treatment of DMT2, is effective in lowering glucose levels, but its oral administration causes problems, including gastrointestinal side effects, low bioavailability, and the risk of hypoglycemia. In this study, we formulated MTF into microparticles incorporating a glucose-responsive polymer (MP-MTF-GR), which could potentially increase the bioavailability and extend and control the release of MTF according to glucose levels. This system was delivered by dissolving microneedles (MP-MTF-GR-DMN), applied through the skin, thereby preventing gastrointestinal side effects of orally administered MTF. MP-MTF-GR was formulated using various concentrations of gelatin as a polymer combined with phenylboronic acid (PBA) as a glucose-responsive material. MP-MTF-GR was encapsulated in DMN using polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) as DMN polymers. The physicochemical evaluation of MP-MTF-GR showed that MTF could be completely entrapped in MP with the percentage of MTF trapped increasing with increasing gelatin concentration without changing the chemical structure of MTF and producing stable MP. In addition, the results of the physicochemical evaluation of MP-MTF-GR-DMN showed that DMN had adequate mechanical strength properties and penetration ability and was stable to environmental changes. The results of the in vitro release and ex vivo permeation study on media with various concentrations of glucose showed that the release and permeation of MTF from the formula increased with increasing glucose levels in the media. The MP-MTF-GR-DMN formula successfully delivered MTF through the skin at 11.30 ± 0.29, 23.31 ± 1.64, 36.12 ± 3.77, and 53.09 ± 3.01 μg from PBS, PBS + glucose 1%, PBS + glucose 2%, and PBS + glucose 4%, respectively, at 24 h, which indicates glucose-responsive permeation and release behavior. The formula developed was also proven to be nontoxic based on hemolysis tests. Importantly, the in vivo study on the rat model showed that this combination approach could provide a better glucose reduction compared to other routes, reducing the blood glucose level to normal levels after 3 h and maintaining this level for 8 h. Furthermore, this approach did not change the skin moisture of the rats. This MP-MTF-GR-DMN is a promising alternative to MTF delivery to overcome MTF problems and increase the effectiveness of T2DM therapy.

Evaluating effect of salt leaching method on release and swelling rate of metformin nanoparticles loaded-chitosan/polyvinyl alcohol porous composite

In this study, salt leaching (SL) technique was used to prepare a chitosan/polyvinyl alcohol (CS/PVA) polymeric composite in order to load metformin nanoparticles (METNPs). Sodium chloride was added to the CS/PVA (0.5:0.1) composite to create a porous hydrogel using the SL technique. METNPs were then prepared by water/oil (w/o) method and loaded into the hydrogel structure. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analysis confirmed that >80 % of the METNPs were in the range of 10 nm. As a result, encapsulation increased due to the increase in surface-to-volume ratio. Scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) results confirmed that creating porosity in the polymer composition by the SL method led to increased CS/PVA polymer chain mobility. The drug encapsulation increased due to more porosity, and the release in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) was according to the controlled diffusion kinetics. Furthermore, the drug release from CS/PVA composite was anomalous carrier type that could be attributed to the addition of salt. However, due to the increase the amount of PVA and the creation of a monotonous composite structure, encapsulation of drug decreased, which is in accordance with the polymer relaxation mechanism.

Characterization of Dual-Layer Hybrid Biomatrix for Future Use in Cutaneous Wound Healing

A skin wound without immediate treatment could delay wound healing and may lead to death after severe infection (sepsis). Any interruption or inappropriate normal wound healing, mainly in these wounds, commonly resulted in prolonged and excessive skin contraction. Contraction is a common mechanism in wound healing phases and contributes 40-80% of the original wound size post-healing. Even though it is essential to accelerate wound healing, it also simultaneously limits movement, mainly in the joint area. In the worst-case scenario, prolonged contraction could lead to disfigurement and loss of tissue function. This study aimed to fabricate and characterise the elastin-fortified gelatin/polyvinyl alcohol (PVA) film layered on top of a collagen sponge as a bilayer hybrid biomatrix. Briefly, the combination of halal-based gelatin (4% (w/v)) and PVA ((4% (w/v)) was used to fabricate composite film, followed by the integration of poultry elastin (0.25 mg/mL) and 0.1% (w/v) genipin crosslinking. Furthermore, further analysis was conducted on the composite bilayer biomatrix's physicochemical and mechanical strength. The bilayer biomatrix demonstrated a slow biodegradation rate (0.374967 ± 0.031 mg/h), adequate water absorption (1078.734 ± 42.33%), reasonable water vapour transmission rate (WVTR) (724.6467 ± 70.69 g/m² h) and porous (102.5944 ± 28.21%). The bilayer biomatrix also exhibited an excellent crosslinking degree and was mechanically robust. Besides, the elastin releasing study presented an acceptable rate post-integration with hybrid biomatrix. Therefore, the ready-to-use bilayer biomatrix will benefit therapeutic effects as an alternative treatment for future diabetic skin wound management.

Synthesis of Modified Poly(vinyl Alcohol)s and Their Degradation Using an Enzymatic Cascade

Poly(vinyl alcohol) (PVA) is a water-soluble synthetic vinyl polymer with remarkable physical properties including thermostability and viscosity. Its biodegradability, however, is low even though a large amount of PVA is released into the environment. Established physical-chemical degradation methods for PVA have several disadvantages such as high price, low efficiency, and secondary pollution. Biodegradation of PVA by microorganisms is slow and frequently involves pyrroloquinoline quinone (PQQ)-dependent enzymes, making it expensive due to the costly cofactor and hence unattractive for industrial applications. In this study, we present a modified PVA film with improved properties as well as a PQQ-independent novel enzymatic cascade for the degradation of modified and unmodified PVA. The cascade consists of four steps catalyzed by three enzymes with in situ cofactor recycling technology making this cascade suitable for industrial applications.

A Designed Vessel Using Dissolvable Polyvinyl Alcohol Membrane as Automatic Valve to Couple LAMP with CRISPR/Cas12a System for Visual Detection

A rapid and intuitive method for detecting Vibrio parahaemolyticus (VP) was established by a designed reaction vessel which coupled CRISPR/Cas12a with loop-mediated isothermal nucleic acid amplification (LAMP). There were two spaces in the vessel-holding LAMP reaction solution and CRISPR reaction solution, respectively, which were separated with a polyvinyl alcohol (PVA) membrane. The PVA membrane could be dissolved with a water solution. The thermolabile hemolysin (TLH) gene of VP was employed as the detection target. After the target sequence of the TLH gene was amplified with LAMP, the PVA membrane would be dissolved and the CRISPR reaction solution mixed with the LAMP reaction solution. In this way, amplicons could be detected with CRISPR/Cas12a in the reaction vessel. The fluorescent signals produced by the positive samples were clearly identified by the naked eye under a UV light, while the negative samples were dark. The whole detection procedure could be finished within 35 min with a detection limit of 100 copies/µL. The designed reaction vessel is easy to produce and can effectively prevent contamination due to the opening of the reaction vessel after the LAMP reaction. Thus, it will have the potential to provide a new solution for rapid detection in the field.

Hornification: Lessons learned from the wood industry for attenuating this phenomenon in plant-based dietary fibers from food wastes

A significant amount of waste is annually generated worldwide by the supply chain of the food industry. Considering the population growth, the environmental concerns, and the economic opportunities, waste recovery is a promising solution to produce valuable and innovative ingredients for food and nonfood industries. Indeed, plant-based wastes are rich in dietary fibers (DF), which have relevant technical functionalities such as water/oil holding capacity, swelling capacity, viscosity, texture, and physiological properties such as antioxidant activity, cholesterol, and glucose adsorption capacities. Different drying technologies could be applied to extend the shelf life of fresh DF. However, inappropriate drying technologies or process conditions could adversely affect the functionalities of DF via the hornification phenomenon. Hornification is related to the formation of irreversible hydrogen bindings, van der Waals interactions, and covalent lactone bridges between cellulose fibrils during drying. This review aims to capitalize on the knowledge developed in the wood industry to tackle the hornification phenomenon occurring in the food industry. The mechanisms and the parameters affecting hornification as well as the mitigation strategies used in the wood industry that could be successfully applied to foods are summarized. The application of conventional drying technologies such as air or spray-drying increased the occurrence of hornification. In contrast, solvent exchange, supercritical drying, freeze-drying, and spray-freeze-drying approaches were considered effective strategies to limit the consequences of this phenomenon. In addition, incorporating capping agents before drying attenuated the hornification. The knowledge summarized in this review can be used as a basis for process design in the valorization of plant-based wastes and the production of functional DF that present relevant features for the food and packaging industries.

Targeting of phagolysosomes containing conidia of the fungus Aspergillus fumigatus with polymeric particles

Conidia of the airborne human-pathogenic fungus Aspergillus fumigatus are inhaled by humans. In the lung, they are phagocytosed by alveolar macrophages and intracellularly processed. In macrophages, however, conidia can interfere with the maturation of phagolysosomes to avoid their elimination. To investigate whether polymeric particles (PPs) can reach this intracellular pathogen in macrophages, we formulated dye-labeled PPs with a size allowing for their phagocytosis. PPs were efficiently taken up by RAW 264.7 macrophages and were found in phagolysosomes. When macrophages were infected with conidia prior to the addition of PPs, we found that they co-localized in the same phagolysosomes. Mechanistically, the fusion of phagolysosomes containing PPs with phagolysosomes containing conidia was observed. Increasing concentrations of PPs increased fusion events, resulting in 14% of phagolysosomes containing both conidia and PPs. We demonstrate that PPs can reach conidia-containing phagolysosomes, making these particles a promising carrier system for antimicrobial drugs to target intracellular pathogens. KEY POINTS: • Polymer particles of a size larger than 500 nm are internalized by macrophages and localized in phagolysosomes. • These particles can be delivered to Aspergillus fumigatus conidia-containing phagolysosomes of macrophages. • Enhanced phagolysosome fusion by the use of vacuolin1 can increase particle delivery.

Nanobacterial Cellulose Production and Its Antibacterial Activity in Biodegradable Poly(vinyl alcohol) Membranes for Food Packaging Applications

Nanobacterial cellulose (NBC) was produced and incorporated into biodegradable poly(vinyl alcohol) (PVA) in different weight ratios to obtain polymer nanocomposite membranes. The physicochemical properties of the membranes were studied using Fourier transform infrared (FTIR) spectroscopy, a universal testing machine (UTM), thermogravimetric analysis (TGA), wide-angle X-ray diffraction (WAXD) techniques, and field emission scanning electron microscopy (FESEM). FTIR confirmed the consolidation of NBC into PVA by exhibiting significant changes in the peaks compared to NBC and PVA individually. The highest tensile strength of 53.33 MPa and 235.30% elongation at break of the membrane M-10 mass % NBC was obtained, illuminating that NBC provides stiffness and PVA imparts elasticity. WAXD revealed that the crystalline nature of the membrane increases up to 10 mass % and decreases beyond it. The effect of NBC on the poly(vinyl alcohol) membranes for food packaging was investigated systematically. Among all the membranes, M-10 mass % NBC was found to be the most suitable for packaging applications. Membranes had antimicrobial activity against food microbes and showed degradability behavior in the soil. The tests on membranes for packaging revealed that fruits were protected from spoilage caused by microorganisms. Hence, the prepared membranes could be used as an alternative to conventional plastics for packaging applications.