Magnetic field assisted centrifugal acceleration thin-layer chromatography: An approach to investigate the magnetic field effects on separation parameters including retention factor difference, selectivity factor, and resolution

The effect of internal and external magnetic fields on the separation of antifungal drugs by centrifugal acceleration thin-layer chromatography was reported for the first time. External and internal magnetic fields were applied using neodymium magnets and CoFe2O4@SiO2 ferromagnetic nanoparticles. Separation of ketoconazole and clotrimazole was performed using a mobile phase consisting of n-hexane, ethyl acetate, ethanol, and ammonia (2.0:2.0:0.5:0.2, v/v). The influence of the magnetic field on the entire chromatographic system led to changes in the properties of the stationary and mobile phases and the analytes affecting the retention factor, shape, and width of the separated rings. The extent of this impact depended on the structure of the analyte and the type and intensity of the magnetic field. In the presence of the external magnetic field, there were more significant changes in the chromatographic parameters of the drugs, especially the width of the separated rings, and ketoconazole was more affected than clotrimazole. The changes are conceivably due to the effect of the magnetic field on the analyte distribution between the stationary and mobile phases, which is also caused by the possibility of the magnetic field affecting the viscosity, surface tension, and surface free energy between the stationary and mobile phases.

COF-based membranes for liquid phase separation: Preparation, mechanism and perspective

Covalent organic frameworks (COFs) are a new kind of crystalline porous materials composed of organic molecules connected by covalent bonds, processes the characteristics of low density, large specific surface area, adjustable pore size and structure, and easy to functionalize, which have been widely used in the field of membrane separation technology. Recently, there are more and more researches focusing on the preparation methods, separation application, and mechanism of COF membranes, which need to be further summarized and compared. In this review, we primarily summarized several conventional preparation methods, such as two-phase interfacial polymerization, in-situ growth on substrate, unidirectional diffusion method, layer-by-layer assembly method, mixed matrix membranes, and so on. The advantages and disadvantages of each method are briefly summarized. The application potential of COF membrane in liquid separation are introduced from four aspects: dyeing wastewater treatment, heavy metal removal, seawater desalination and oil-water separation. Then, the mechanisms including pore structure, hydrophilic/hydrophobic, electrostatic repulsion/attraction and Donnan effect are introduced. For the efficient removal of different kind of pollutions, researchers can select different ligands to construct membranes with specific pore size, hydrophily, salt or organic rejection ability and functional group. The ideas for the design and preparation of COF membranes are introduced. Finally, the future direction and challenges of the next generation of COF membranes in the field of separation are prospected.

Functionalization of Magnetic UiO-66-NH2 with a Chiral Cu(l-proline)2 Complex as a Hybrid Asymmetric Catalyst for CO2 Conversion into Cyclic Carbonates

In this study, a chiral [Cu(l-proline)2] complex-modified Fe3O4@SiO2@UiO-66-NH2(Zr) metal-organic framework [Fe3O4@SiO2@UiO-66-NH-Cu(l-proline)2] via multifunctionalization strategies was designed and synthesized. One simple approach to chiralize an achiral MOF-structure that cannot be directly chiralized using a chiral secondary agent like 4-hydroxy-l-proline. Therefore, this chiral catalyst was synthesized with a simple and multistep method. Accordingly, Fe3O4@SiO2@UiO-66-NH2 has been synthesized via Fe3O4 modification with tetraethyl orthosilicate and subsequently with ZrCl4 and 2-aminoterephthalic acid. The presence of the silica layer helps to stabilize the Fe3O4 core, while the bonding between Zr4+ and the -OH groups in the silica layer promotes the development of Zr-MOFs on the Fe3O4 surface, and then the surfaces of the synthesized magnetic MOFs composite are functionalized with 1,2-dichloroethane and Cu(II) complex with 4-hydroxy-l-proline, [Cu(l-proline)2] to afford the magnetically chiral nanocatalyst. Multiple techniques were employed to characterize this magnetically chiral nanocatalyst such as Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectrometry (EDX), powder X-ray diffraction (PXRD), circular dichroism (CD), inductively coupled plasma (ICP), thermogravimetric analysis (TGA), vibrating-sample magnetometry (VSM), and Brunauer-Emmett-Teller (BET) analyses. Moreover, a magnetically chiral nanocatalyst shows the asymmetric CO2 fixation reaction under solvent-free conditions at 80 °C and in ethanol under reflux conditions with up to 99 and 98% ee, respectively. Furthermore, the reaction mechanism was illustrated concerning the total energy of the reactant, intermediates and product, and the structural parameters were analyzed.

Asymmetric magnetic levitation for density-based measurement and analysis

BACKGROUND

Magnetic levitation (MagLev) based on negative magnetophoresis represents a promising technology for density-based analysis and manipulation of nonmagnetic objects. This approach has garnered considerable interest across multiple fields, such as chemistry, materials science, and biochemistry, primarily due to its inherent simplicity, precision, and cost-effectiveness. However, it is essential to recognize that frequently used MagLev configurations, including standard MagLev and axial MagLev, are not without their limitations. These configurations often struggle to strike a balance between levitation performance, ease of operation, and visibility. Therefore, it is necessary to develop a new MagLev configuration to address the aforementioned issue.

RESULTS

This work describes the development of an innovative MagLev, termed "asymmetric MagLev", achieved by combining a ring magnet and a cylinder magnet as up-down asymmetric magnetic field sources. The asymmetric design overcomes the physical obstacles along the centerline of the standard MagLev, offering unique open-structure advantages, including easy handling of samples, the ability to observe samples from the top or bottom, and no restrictions on the container height. Meanwhile, comparative analysis reveals a considerable enhancement in the working distance of the asymmetric MagLev without significantly sacrificing the measurement range compared to the axial MagLev. Notably, the asymmetric MagLev achieves a remarkable sensitivity of up to about 1.8 × 104 mm (g cm-3)-1, surpassing the axial MagLev by approximately 30 times. Furthermore, experimental results validate the successful application of the asymmetric MagLev in density measurement and quality detection of small-sized objects.

SIGNIFICANCE

This pioneering configuration represents the first utilization of up-down asymmetric magnets in the field of MagLev. Through the integration of an axially magnetized ring magnet and a cylinder magnet, the asymmetric MagLev design overcomes the limitations associated with conventional MagLev configurations. This innovative design exhibits outstanding operational capabilities and levitation performance, making it suitable for a wide range of applications in density-based measurement and analysis.

Magnetically Controlled and Addressable Photoelectrochemical Sensor Array with Self-Calibration for the Label-Free Detection of Amyloid β-Proteins

A label-free addressable photoelectric immunosensor array was designed for the detection of amyloid β-proteins based on magnetic separation and self-calibration strategies. In this paper, Na2Ti6O13 with a flower-like morphology was prepared by the hydrothermal method; after continuously combining Fe3O4 and CdS, it was endowed with magnetism and better photoelectric activity. Subsequently, a series of reactions occurred in the solution, and the magnetic separation method was used to enrich the target. On the other hand, the ITO glass was separated into eight sites (2 × 4) using magnets, and a light shield was utilized to prevent light exposure, resulting in addressable and continuous detection. After the uniform preparation of magnetic photoelectric materials and precise control of testing conditions, the relative errors among different sites have been effectively reduced. Moreover, incorporating a self-calibration strategy has allowed the sensor array to achieve greater accuracy. The proposed photoelectrochemical biosensor exhibits a good relationship with amyloid β-protein ranging from 0.01 to 100 ng mL-1 with a limit of detection of 1.1 pg mL-1 and exhibits excellent specificity, reproducibility, and stability.

Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach

The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.

Radial Magnetic Levitation and Its Application to Density Measurement, Separation, and Detection of Microplastics

This work describes the development of radial magnetic levitation (MagLev) using two radially magnetized ring magnets to solve the problem of limited operational spaces in standard MagLev and the major shortcoming of a short working distance in axial MagLev. Interestingly and importantly, we demonstrate that for the same magnet size, this new configuration of MagLev doubles the working distance over the axial MagLev without significantly sacrificing the density measurement range, whether for linear or nonlinear analysis. Meanwhile, we develop a magnetic assembly method to fabricate the magnets for the radial MagLev, where multiple magnetic tiles with single-direction magnetization are used as assembly elements. On this basis, we experimentally demonstrate that the radial MagLev has good applicability in density-based measurement, separation, and detection and show its advantages in improving separation performance compared with the axial MagLev. The open structure of two-ring magnets and good levitation characteristics make the radial MagLev have great application potential, and the performance improvement brought by adjusting the magnetization direction of magnets provides a new perspective for the magnet design in the field of MagLev.

Versatile magnetic configuration for the control and manipulation of superparamagnetic nanoparticles

The control and manipulation of superparamagnetic nanoparticles (SP-MNP) is a significant challenge and has become increasingly important in various fields, especially in biomedical research. Yet, most of applications rely on relatively large nanoparticles, 50 nm or higher, mainly due to the fact that the magnetic control of smaller MNPs is often hampered by the thermally induced Brownian motion. Here we present a magnetic device able to manipulate remotely in microfluidic environment SP-MNPs smaller than 10 nm. The device is based on a specifically tailored configuration of movable permanent magnets. The experiments performed in 500 µm capillary have shown the ability to concentrate the SP-MNPs into regions characterized by different shapes and sizes ranging from 100 to 200 µm. The results are explained by straightforward calculations and comparison between magnetic and thermal energies. We provide then a comprehensive description of the magnetic field intensity and its spatial distribution for the confinement and motion of magnetic nanoparticles for a wide range of sizes. We believe this description could be used to establish accurate and quantitative magnetic protocols not only for biomedical applications, but also for environment, food, security, and other areas.

Nanotechnology for purifying nematic liquid crystals based on magnetic separation accompanied by phase transition

Free ions are generally unfavorable in liquid crystal (LC) displays, and LC purification technologies are critically important. The colloidal γ-Fe₂O₃ magnetic nanoparticles coated with oleic acid (γ-Fe₂O₃@OA MNPs) have a high ratio of surface to volume, which may adsorb more free ions and are uniform in the LC at room temperature. In this work, the precipitation and separation of the doped colloidal γ-Fe₂O₃@OA MNPs resulting from the magnetic field accompanied by an isotropic-nematic phase transition are more efficient than in the single case of the phase transition or the magnetic field. The residual ion concentrations have decreased distinctly using the low gradient magnetic field (∇ B ∼ 2 T/m) with the phase transition. In addition, when the doped colloidal γ-Fe₂O₃@OA MNPs are 0.4 % and 0.2 % by weight, the former concentrations of the residual ions and γ-Fe₂O₃@OA MNPs are lower than the latter. As a result, the commercial nematic LC can be purified by this approach based on nanotechnology in our study.

Multiscale Multimodal Investigation of the Intratissural Biodistribution of Iron Nanotherapeutics with Single Cell Resolution Reveals Co-Localization with Endogenous Iron in Splenic Macrophages

Imaging of iron-based nanoparticles (NPs) remains challenging because of the presence of endogenous iron in tissues that is difficult to distinguish from exogenous iron originating from the NPs. Here, an analytical cascade for characterizing the biodistribution of biomedically relevant iron-based NPs from the organ scale to the cellular and subcellular scales is introduced. The biodistribution on an organ level is assessed by elemental analysis and quantification of magnetic iron by electron paramagnetic resonance, which allowed differentiation of exogenous and endogenous iron. Complementary to these bulk analysis techniques, correlative whole-slide optical and electron microscopy provided spatially resolved insight into the biodistribution of endo- and exogenous iron accumulation in macrophages, with single-cell and single-particle resolution, revealing coaccumulation of iron NPs with endogenous iron in splenic macrophages. Subsequent transmission electron microscopy revealed two types of morphologically distinct iron-containing structures (exogenous nanoparticles and endogenous ferritin) within membrane-bound vesicles in the cytoplasm, hinting at an attempt of splenic macrophages to extract and recycle iron from exogenous nanoparticles. Overall, this strategy enables the distinction of endo- and exogenous iron across scales (from cm to nm, based on the analysis of thousands of cells) and illustrates distribution on organ, cell, and organelle levels.

Magnetic Nanoparticles for Protein Separation and Purification

Proteins are essential for various functions such as brain activity and muscle contraction in humans. Even though food is a source of proteins, the bioavailability of proteins in most foods is usually limited due to matrix interaction with other biomolecules. Thus, it is essential to extract these proteins and provide them as a nutraceutical supplement to maintain protein levels and avoid protein deficiency. Hence, protein purification and extraction from natural sources are highly significant in biomedical applications. Chromatography, crude mechanical disruption, use of extractive chemicals, and electrophoresis are some of the methods applied to isolate specific proteins. Even though these methods possess several advantages, they are unable to extract specific proteins with high purity. A suitable alternative is the use of nanoparticles, which can be beneficial in protein purification and extraction. Notably, magnetic iron and iron-based nanoparticles have been employed in protein extraction processes and can be reused via demagnetization due to their magnetic property, smaller size, morphology, high surface-to-volume ratio, and surface charge-mediated property. This chapter is a summary of various magnetic nanoparticles (MNPs) that can be used for the biomolecular separation of proteins.

Non-fouling flow reactors for nanomaterial synthesis

This review provides a holistic description of flow reactor fouling for wet-chemical nanomaterial syntheses. Fouling origins and consequences are discussed together with the variety of flow reactors for its prevention.

Colorimetric and photothermal dual-mode lateral flow immunoassay based on Au-Fe3O4 multifunctional nanoparticles for detection of Salmonella typhimurium

Au-Fe₃O₄ multifunctional nanoparticles (NPs) were synthesized and integrated with lateral flow immunoassay (LFIA) for dual-mode detection of Salmonella typhimurium. The Au-Fe₃O₄ NPs not only combined excellent local surface plasmon resonance characteristics and superparamagnetic properties, but also exhibited good photothermal effect. In the detection, antibody-conjugated Au-Fe₃O₄ NPs first captured S. typhimurium from complex matrix, which was then loaded on the LFIA strip and trapped by the T-line. By observing the color bands with the naked eyes, qualitative detection was performed free of instrument. By measuring the photothermal signal, quantification was achieved with a portable infrared thermal camera. The introduction of magnetic separation achieved the enrichment and purification of target bacteria, thus enhancing the detection sensitivity and reducing interference. This dual-mode LFIA achieved a visual detection limit of 5 × 10⁵ CFU/mL and a photothermal detection limit of 5 × 10⁴ CFU/mL. Compared with traditional Au-based LFIA, this dual-mode LFIA increased the detection sensitivity by 2 orders of magnitude and could be directly applied to unprocessed milk sample. Besides, this dual-mode LFIA showed good reproducibility and specificity. The intra-assay and inter-assay variation coefficients were 3.0% and 7.9%, and with this dual-mode LFIA, other bacteria hardly produced distinguishable signals. Thus, the Au-Fe₃O₄ NPs-based LFIA has potential to increase the efficiency of pandemic prevention and control. Au-Fe₃O₄ nanoparticle proved to be a promising alternative reporter for LFIA, achieving multifunctions: target purification, target enrichment, visual qualitation, and instrumental quantification, which improved the limitations of traditional LFIA.

Engineered Protein-Driven Synthesis of Tunable Iron Oxide Nanoparticles as T1 and T2 Magnetic Resonance Imaging Contrast Agents

Iron oxide nanoparticles (IONPs) have become one of the most promising nanomaterials for biomedical applications because of their biocompatibility and physicochemical properties. This study demonstrates the use of protein engineering as a novel approach to design scaffolds for the tunable synthesis of ultrasmall IONPs. Rationally designed proteins, containing different number of metal-coordination sites, were evaluated to control the size and the physicochemical and magnetic properties of a set of protein-stabilized IONPs (Prot-IONPs). Prot-IONPs, synthesized through an optimized coprecipitation approach, presented good T1 and T2 relaxivity values, stability, and biocompatibility, showing potential for magnetic resonance imaging (MRI) applications.

Investigation of scale inhibition effect and mechanism of S-HGMF in the clean recirculating cooling water system

The formation of scales in a recirculating water system is a common problem in industrial water treatment; it seriously affects the production in various industries and pollutes the environment. Although conventional scale inhibition methods are effective, they are expensive and harm the environment. Herein, an advanced method is proposed to solve the scaling issue in recirculating cooling water systems using the superconducting high-gradient magnetic field (S-HGMF) treatment. The scale inhibition performance could be improved by changing the magnetic flux density, operation time, and flow rate. The results showed that S-HGMF could increase the number of hydrogen bonds in the recirculating cooling water, enhance molecular interaction, increase the thickness of the ion hydration shell, reduce the nucleation rate, stabilize the water quality, improve the solubility of scale-forming ions, and inhibit scale formation. The scale inhibition performance reached 8.10%. Interestingly, S-HGMF had a memory effect in that it could maintain the scale inhibition effect for some period after treatment completion. Moreover, S-HGMF changed the crystal structure of the scale and promoted the transformation of the scale to a metastable phase. Ultimately, calcite was transformed to aragonite to reduce the precipitation of hard scale (calcite), achieving the purpose of scale inhibition. As a physical method, the application of S-HGMF to inhibit scaling has great potential for industrial applications.

A Highly Sensitive Fluorescence and Screen-Printed Electrodes—Electrochemiluminescence Immunosensor for Ricin Detection Based on CdSe/ZnS QDs with Dual Signal

A sensitive dual-readout immunosensor for fluorescence and electrochemiluminescence (ECL) detection of ricin was established, which was combined with a streptavidin–biotin signal amplification system. CdSe/ZnS quantum dots with fine fluorescence and ECL properties were used as the dual-signal function probes of the sandwich immunocomplex. Under the optimum experimental conditions, the dual signal intensity increased significantly with the rise in ricin concentration. The fluorescence intensity of the senor exhibited a good liner relationship toward the ricin concentrations with 0.1~100 ng/mL and the limit of detection (LOD) was 81.7 pg/mL; taking ECL as the detection signal, the sensor showed a linear relationship with the ricin concentrations ranging from 0.01 ng/mL to 100 ng/mL and the LOD was 5.5 pg/mL. The constructed sensor with high sensitivity had been successfully applied to the detection of ricin in complex matrices with satisfactory recoveries. The proposed immunosensor model can be extended to the analysis and detection of others target proteins.

Advances in magnetic nanoparticles for the separation of foodborne pathogens: Recognition, separation strategy, and application

Foodborne pathogens contamination is one of the main sources of food safety problems. Although the existing detection methods have been developed for a long time, the complexity of food samples is still the main factor affecting the detection time and sensitivity, and the rapid separation and enrichment of pathogens is still an objective to be studied. Magnetic separation strategy based on magnetic nanoparticles (MNPs) is considered to be an effective tool for rapid separation and enrichment of foodborne pathogens in food. Therefore, this study comprehensively reviews the development of MNPs in the separation of foodborne pathogens over the past decade. First, various biorecognition reagents for identification of foodborne pathogens and their modifications on the surface of MNPs are introduced. Then, the factors affecting the separation of foodborne pathogens, including the size of MNPs, modification methods, separation strategies and separation forms are discussed. Finally, the application of MNPs in integrated detection methods is reviewed. Moreover, current challenges and prospects of MNPs for the analysis of foodborne pathogens are discussed. Further research should focus on the design of multifunctional MNPs, the processing of large-scale samples, the simultaneous analysis of multiple targets, and the development of all-in-one small analytical device with separation and detection.

Covalent Organic Frameworks-Based Membranes as Promising Modalities from Preparation to Separation Applications: An Overview

Covalent organic frameworks (COFs) are a promising class of porous crystalline materials made up of covalently connected and periodically protracted network topologies through organic linkers. The tailorability of organic linker and intrinsic structures endow COFs with a tunable porosity and structure, low density, facilely-tailored functionality, and large surface area, attracting increasing amount of interests in variety of research areas of membrane separations. COF-based membranes have spawned a slew of new research projects, ranging from fabrication methodologies to separation applications. Herein, we tried to emphasis the major developments in the synthetic approaches of COFs based membranes for a variety of separation applications such as, separation of gaseous mixtures, water treatment as well as separation of isomeric and chiral organic compounds. The proposed methods for fabricating COF-based continuous membranes and columns for real world applications are also thoroughly explored. Finally, a viewpoint on the future directions and remaining challenges for COF research in the area of separation is provided.

Metal-Enhanced Aggregation-Induced Emission Strategy for the HIV-I RNA-Binding Ligand Assay

The HIV-Ι trans-activation responsive (TAR) RNA-trans-activator of transcription (Tat) protein complex is crucial for the efficient transcription of the integrated human immunodeficiency virus-I genome and is an established therapeutic target for AIDS diagnosis and treatment. Developing a sensitive strategy for the TAR RNA-binding ligand assay could provide antiviral leads with a radically new mechanism for the treatment of AIDS. Herein, a new TAR RNA-binding ligand assay platform was established using a signal amplification strategy that combines aggregation-induced emission (AIE) with a metal-enhanced fluorescence (MEF) concept. The tetraphenylethylene (TPE) derivative was labeled on the Tat peptide as a fluorescent molecule, while the TAR RNA was immobilized on the surface of the Fe₃O₄@Au@Ag@SiO₂ nanoparticles (NPs) to specifically bind the TPE-Tat peptide. The TPE-Tat peptide was weakly emissive itself while emitting strongly in the NP-TAR-TPE-Tat complex by the AIE and MEF signal amplification effect. It was confirmed by known Tat peptide competitors that this system could be applied to the screening and detection of TAR RNA-binding ligands because they could replace the TPE-Tat peptide from the complex and make the system fluorescence decrease. When this system was adopted to test four candidate ligands, it was found that bisantrene had a favorable TAR RNA-binding ability. The proposed AIE-MEF strategy not only provides a sensitive and reliable method for the TAR RNA-binding ligand assay but also can avoid the influence of ligands on fluorescent detection in the conventional displacement assay.

Using small-angle scattering to guide functional magnetic nanoparticle design

Magnetic nanoparticles offer unique potential for various technological, biomedical, or environmental applications thanks to the size-, shape- and material-dependent tunability of their magnetic properties. To optimize particles for a specific application, it is crucial to interrelate their performance with their structural and magnetic properties. This review presents the advantages of small-angle X-ray and neutron scattering techniques for achieving a detailed multiscale characterization of magnetic nanoparticles and their ensembles in a mesoscopic size range from 1 to a few hundred nanometers with nanometer resolution. Both X-rays and neutrons allow the ensemble-averaged determination of structural properties, such as particle morphology or particle arrangement in multilayers and 3D assemblies. Additionally, the magnetic scattering contributions enable retrieving the internal magnetization profile of the nanoparticles as well as the inter-particle moment correlations caused by interactions within dense assemblies. Most measurements are used to determine the time-averaged ensemble properties, in addition advanced small-angle scattering techniques exist that allow accessing particle and spin dynamics on various timescales. In this review, we focus on conventional small-angle X-ray and neutron scattering (SAXS and SANS), X-ray and neutron reflectometry, gracing-incidence SAXS and SANS, X-ray resonant magnetic scattering, and neutron spin-echo spectroscopy techniques. For each technique, we provide a general overview, present the latest scientific results, and discuss its strengths as well as sample requirements. Finally, we give our perspectives on how future small-angle scattering experiments, especially in combination with micromagnetic simulations, could help to optimize the performance of magnetic nanoparticles for specific applications.

Investigations of Metal Pollution in Road Dust of Steel Industrial Area and Application of Magnetic Separation

Pollution characteristics and ecological risks for metals in non-magnetic and magnetic road dust from steel industrial areas were investigated by applying a magnetic separation method. Metal (except for Al, Li, Ti, As, and Sb) concentrations in the magnetic road dust were 1.2 (Sn) to 7.8 (Fe) times higher than those in the non-magnetic road dust. For the magnetic road dust, the geo-accumulation index revealed a strongly to extremely polluted status for Cr, Zn, Cd, and Sb, a strongly polluted status for Mn, Cu, and Pb, and a moderately to strongly polluted status for Fe, Ni, Mo, and Hg. This result indicates that the dominant metal pollution sources of road dust in industrial areas were the traffic activities of heavy-duty vehicles. The mean content of magnetic particles accounted for 44.7% of the total road dust. The metal loadings in the magnetic road dust were 86% (Fe), 77% (Cr), 67% (Mn), 86% (Ni), 76% (Cu), 72% (Zn), 64% (Mo), and 62% (Cd), respectively. Removal of the magnetic fraction from road dust using magnetic separation techniques not only reduces metal contamination but can also improve effective road cleaning strategies or reduce waste generation.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

Fabrication of Fe3O4@poly(methyl methacrylate-co-glycidyl methacrylate) microspheres via miniemulsion polymerization using porous microspheres as templates for removal of cationic dyes

A novel and simple method was proposed to prepare monodisperse magnetic microspheres with controllable particle sizes and different functionalities.

SPIONs self-assembly and magnetic sedimentation in quadrupole magnets: Gaining insight into the separation mechanisms

Superparamagnetic iron oxide nanoparticles (SPIONs) are currently popular materials experiencing rapid development with potential application value, especially in biomedical and chemical engineering fields. Examples include wastewater management, bio-detection, biological imaging, targeted drug delivery and biosensing. While not exclusive, magnetically driven isolation methods are typically required to separate the desired entity from the media in specific applications and in their manufacture and/or quality control. However, due to the nano-size of SPIONs, their magnetic manipulation is affected by Brownian motion, adding considerable complexities. The two most common methods for SPION magnetic separation are high and low gradient magnetic separation (HGMS and LGMS, respectively). Nevertheless, the effect of specific magnetic energy fields on SPIONs, such as horizontal (perpendicular to gravity), high fields and gradients (higher than LGMS) on the horizontal magnetophoresis and vertical sedimentation of SPIONs has only recently been suggested as a way to separate very small particles (5 nm). In this work, we continue those studies on the magnetic separation of 5-30 nm SPIONs by applying fields and gradients perpendicular to gravity. The magnetic field was generated by permanent magnets arranged in quadrupolar configurations (QMS). Different conditions were studied, and multiple variables were evaluated, including the particle size, the initial SPIONs concentration, the temperature, the magnetic field gradient and the magnetic exposure time. Our experimental data show that particles are subjected to horizontal magnetic forces, to particle agglomeration due to dipole-dipole interactions, and to vertical sedimentation due to gravity. The particle size and the type of separator employed (i.e. different gradient and field distribution acting on the particle suspension) have significant effects on the phenomena involved in the separation, whereas the temperature and particle concentration affect the separation to a lesser extent. Finally, the separation process was observed to occur in less than 3 mins for our experimental conditions, which is encouraging considering the long operation time (up to days) necessary to separate particles of similar sizes in LGMS columns that also employ permanent magnets.

A facile magnetic extrusion method for preparing endosome-derived vesicles for cancer drug delivery

To date, the scaled-up manufacturing and efficient drug loading of exosomes are two existing challenges limiting the clinical translation of exosome-based drug delivery. Herein, we developed a facile magnetic extrusion method for preparing endosome-derived vesicles, also known as exosome mimetics (EMs), which share the same biological origin and similar morphology, composition, and biofunctions with native exosomes. The high yield and consistency of this magnetic extrusion method help to overcome the manufacturing bottleneck in exosome research. Moreover, the proposed standardized multi-step method readily facilitates the ammonium sulfate gradient approach to actively load chemodrugs such as doxorubicin into EMs. The engineered EMs developed and tested here exhibit comparable drug delivery properties as do native exosomes and potently inhibit tumor growth by delivering doxorubicin in an orthotopic breast tumor model. These findings demonstrate that EMs can be prepared in a facile and scaled-up manner as a promising biological nanomedicine for cancer drug delivery.

Biosensors and Bioanalytical Devices based on Magnetic Particles: A Review

Magnetic particles play an important role in current technology, and this field of technology extends to a broader progression. The term magnetic particles typically cover the paramagnetic particles and super-paramagnetic particles. Various materials like iron oxide are common, but other materials are available as well; a survey of such materials has been included in this work. They can serve for technological purposes like separation and isolation of chemical products or toxic waste, their use in the diagnosis of pathologies, drug delivery and other similar applications. In this review, biosensors, bioanalytical devices and bioassays, have been discussed. Materials for magnetic particles preparation, methods of assay, biosensors and bioassays working in stationary as well as flow-through arrangements are described here. A survey of actual literature has been provided as well.

Interactions between magnetic particles and polyaluminum chloride on the coagulation behavior in humic acid-kaolin synthetic water treatment

Understanding the interactions between magnetic particles (MPs) and polyaluminum chloride (PACl) is essential to elucidate the magnetic seeding coagulation (MSC) process. However, little is known about how MPs interact with the different Al species coexisting in the PACl. Here, the relationships among pollutants removal, residual Al distribution, and floc properties were comparatively studied in the MSC and traditional coagulation (TC) processes to address this issue. The response surface analysis indicated that the interaction between PACl and MPs dosages exhibited significant effects on turbidity and DOC removal. Negligible changes of dissolved Al after MPs addition indicated the weak connection between Al_a and MPs. The formation of MPs-Al_b-HA complexes resulted in the increase of turbidity removal from 90.2% to 96.0% and the reduction of colloidal Al from 0.67 to 0.30 mg L^-1. Humic-like components could be adsorbed on MPs forming MPs-HA complexes, which enhanced the DOC removal from 55% to 58.5%. MPs addition produced loose flocs with a small floc fractal dimension value (1.74), so the average size and strength of flocs in the MSC process (425 μm and 49.7%) were lower than that in the TC process (464 μm and 58.3%). The cumulative volume percentage of large flocs (>700 μm) was decreased from 29.7% to 20.7% with MPs addition, indicating the disruption of large flocs and the reproduction of more fragments. The effective separation of these fragments by magnetic attraction maintained the efficient coagulation performance. This study provides new insights into the interaction mechanism of MPs and PACl in the MSC process.

Hybrids of Pd Nanoparticles and Metal-Organic Frameworks for Enhanced Magnetism

Nonmagnetic Pd exhibits ferromagnetism in the nanosize regime. Various stabilization agents, including surfactants, metal oxide supports, polymers, and porous materials (e.g., metal-organic frameworks (MOFs)), have been employed to prevent the agglomeration of metal nanoparticles. However, magnetic properties are greatly affected by the structural and electronic changes imposed by these stabilizing agents. In particular, metal-MOF hybrids (NPs@MOFs) have reduced magnetic properties, as reported by several authors. Herein, we report the enhancement in magnetic properties resulting from the combination of magnetic Pd NPs with UiO-66(Hf), which exhibits ferromagnetism, and the corresponding modifications in the hybridized structures. These hybridized structures are found to be strongly ferromagnetic, showing high magnetization and coercivity. We observed that the magnetic property is enhanced by 2 to 3 times upon including the Pd NPs on the surface of a UiO-66(Hf) shell support. For a fundamental understanding, the magnetization (M-H data) of the hybridized structure is analyzed with a modified Langevin function.

Preparation of Fe3O4@PMAA@Ni Microspheres towards the Efficient and Selective Enrichment of Histidine-Rich Proteins

Magnetic material is considered to as a major concern material for the enrichment of histidine-rich proteins (His-proteins) via metal-ion affinity. In this work, magnetic polymer microspheres with core-shell structure (Fe₃O₄@PMAA@Ni) were successfully prepared via reflux-precipitation polymerization followed by in situ reduction and growth of Ni²⁺. The obtained Ni nanofoams with flower-like structure and uniform pore size (3.34 nm) provided numerous binding sites for His-proteins. The adsorption performance of Fe₃O₄@PMAA@Ni microspheres for His-proteins was estimated via selectively separating bovine hemoglobin (BHb) and bovine serum albumin (BSA) from a matrix composed of BHb, BSA, and lysozyme (LYZ). The results indicated that Fe₃O₄@PMAA@Ni microspheres could efficiently and selectively separate His-proteins from the matrix, with a maximum adsorption capacity of ∼2660 mg/g for BHb. Moreover, Fe₃O₄@PMAA@Ni microspheres exhibited good stability and recyclability for BHb separation over seven cycles. Therefore, this work reported a novel and facile strategy to prepare core-shell Fe₃O₄@PMAA@Ni microspheres, which was promising for practical applications of His-protein separation and purification in proteomics.

Application of magnetic nanomaterials in magnetic-chromatography: A review

With the advent of nanotechnology and its development, there have been dramatic advances in various aspects of diverse sciences. Nanotechnology encompasses the manipulating matter to create nanometre-scale materials with prodigious features and their implementation in a vast range of applications. The topic that is the current debate in today's scientific community and the transformation origin in modern technologies. Magnetic nanomaterials belong to the group of materials mainly consisting of a magnetic component, such as iron, and a chemical functionality agent. Hitherto, several reports on these materials have been published in various sciences, including chemistry, and their applications have been discussed from different perspectives. One of the most interesting aspects of these materials is in a special type of chromatographic techniques, called "magnetic-chromatography" as well as "magneto-chromatography". The subject that has been somewhat underestimated compared to the other practical aspects of these materials. This review devotes to the recent issue and seeks to address the principles, benefits, challenges, analytical data, and potential applications of magnetic-chromatography in ions separation, size fractionation of magnetic nanoparticles, and isolation of biologically active organic molecules. Also, the new aspects and future trends of this technique are discussed.

An integrated actuating and sensing system for light-addressable potentiometric sensor (LAPS) and light-actuated AC electroosmosis (LACE) operation

To develop a lab on a chip (LOC) integrated with both sensor and actuator functions, a novel two-in-one system based on optical-driven manipulation and sensing in a microfluidics setup based on a hydrogenated amorphous silicon (a-Si:H) layer on an indium tin oxide/glass is first realized. A high-intensity discharge xenon lamp functioned as the light source, a chopper functioned as the modulated illumination for a certain frequency, and a self-designed optical path projected on the digital micromirror device controlled by the digital light processing module was established as the illumination input signal with the ability of dynamic movement of projected patterns. For light-addressable potentiometric sensor (LAPS) operation, alternating current (AC)-modulated illumination with a frequency of 800 Hz can be generated by the rotation speed of the chopper for photocurrent vs bias voltage characterization. The pH sensitivity, drift coefficient, and hysteresis width of the Si₃N₄ LAPS are 52.8 mV/pH, -3.2 mV/h, and 10.5 mV, respectively, which are comparable to the results from the conventional setup. With an identical two-in-one system, direct current illumination without chopper rotation and an AC bias voltage can be provided to an a-Si:H chip with a manipulation speed of 20 μm/s for magnetic beads with a diameter of 1 μm. The collection of magnetic beads by this light-actuated AC electroosmosis (LACE) operation at a frequency of 10 kHz can be easily realized. A fully customized design of an illumination path with less decay can be suggested to obtain a high efficiency of manipulation and a high signal-to-noise ratio of sensing. With this proposed setup, a potential LOC system based on LACE and LAPS is verified with the integration of a sensor and an actuator in a microfluidics setup for future point-of-care testing applications.

Heavy metals biosorption mechanism of partially delignified products derived from mango (Mangifera indica) and guava (Psidium guiag) barks

This paper evaluates the biosorption of toxic metal ions onto the bioadsorbents derived from mango (Mangifera indica) and guava (Psidium guiag) barks and their metal fixation mechanisms. Maximum metal biosorption capacities of the mango bioadsorbent were found in the following increasing order (mg/g): Hg (16.24) < Cu (22.24) < Cd (25.86) < Pb (60.85). Maximum metal biosorption capacities of guava bioadsorbent follow similar order (mg/g): Hg (21.48) < Cu (30.36) < Cd (32.54) < Pb (70.25), but with slightly higher adsorption capacities. The removal mechanisms of heavy metals using bioadsorbents have been ascertained by studying their surface properties and functional groups using various spectrometric, spectroscopic, and microscopic methods. Whewellite (C2CaO4·H2O) has been identified in bioadsorbents based on the characterization of their surface properties using X-ray techniques (XPS and XRD), facilitating the ion exchange of metal ions with Ca2+ bonded with carboxylate moieties. For both the bioadsorbents, the Pb2+, Cu2+, and Cd2+ are biosorbed completely by ion exchange with Ca2+ (89-94%) and Mg2+ (7-12%), whereas Hg2+ is biosorbed partially (57-66%) by ion exchange with Ca2+ (38-42%) and Mg2+ (19-24%) due to involvement of other cations in the ion exchange processes. Bioadsorbents contain lignin which act as electron donor and reduced Cr(VI) into Cr(III) (29.87 and 37.25 mg/g) in acidic medium. Anionic Cr(VI) was not adsorbed onto bioadsorbents at higher pH due to their electrostatic repulsion with negatively charged carboxylic functional groups.

Synthetic Ligand-Coated Starch Magnetic Microbeads for Selective Extraction of Food Additive Silicon Dioxide from Commercial Processed Food

The amorphous form of silicon dioxide has long been regarded as a safe food additive (E551) that is widely used in commercially processed food as an anticaking agent. However, starting with titanium dioxide, there have been growing safety concerns regarding to the use of nanoscale silicon dioxide particles in food as food additives. The size, morphology, and chemical properties of inorganic food materials are important parameters to determine its potential toxicity. Therefore, an effective means of extracting an intact form of SiO₂ from food without altering the physicochemical property of SiO₂ particles is of great need to accurately monitor its characteristics. Here, we report on an effective magnetic separation method to extract food additive SiO₂ from food by utilizing a diatom-originated peptide with a specific affinity to SiO₂ particles. The affinity-based magnetic separation was found to be specific to SiO₂ particles over other types of inorganic food additives such as titanium dioxide and zinc oxide. The size and morphology of SiO₂ were shown to not be affected by the extraction processes. This method was successfully applied to extract and characterize the food additive SiO₂ from six different types of commercial food.

Particle Manipulation with External Field; From Recent Advancement to Perspectives

Physical forces, such as dielectric, magnetic, electric, optical, and acoustic force, provide useful principles for the manipulation of particles, which are impossible or difficult with other approaches. Microparticles, including polymer particles, liquid droplets, and biological cells, can be trapped at a particular position and are also transported to arbitrary locations in an appropriate external physical field. Since the force can be externally controlled by the field strength, we can evaluate physicochemical properties of particles from the shift of the particle location. Most of the manipulation studies are conducted for particles of sub-micrometer or larger dimensions, because the force exerted on nanomaterials or molecules is so weak that their direct manipulation is generally difficult. However, the behavior, interactions, and reactions of such small substances can be indirectly evaluated by observing microparticles, on which the targets are tethered, in a physical field. We review the recent advancements in the manipulation of particles using a physical force and discuss its potentials, advantages, and limitations from fundamental and practical perspectives.

Concentration and Recovery of Valuable Heavy Minerals from Dredged Fine Aggregate Waste

Inside the finest fractions of aggregates, usually wasted by ready mix concrete companies, valuable heavy minerals content is substantial. The concentration and recovery of valuable heavy minerals contained in dredged fine aggregates waste, located in Pyeongtaek South Korea, were investigated to develop a process that can recover and concentrate most of each heavy mineral. The raw material contains ilmenite, magnetite, monazite, and zircon. A gravity separation, recirculating the middlings recovered ilmenite, magnetite, monazite, and zircon with 44.05%, 36.90%, 53.76%, and 69.7% respectively. Nevertheless, a magnetic separation followed by gravity separation of the non-magnetic fraction further improved the recovery of ilmenite, magnetite, monazite, and zircon to 86.96%, 85.09%, 91.06%, and 90.82% respectively. This concentrate was separated at different magnetic intensities. Magnetite was concentrated at 0.05 T, resulting in a recovery of 23.4% and grade of 95.1 wt%. Ilmenite was at 0.4 T, with a recovery of 55.2% and grade of 84.2 wt%. Monazite was at 0.9 T, with a recovery of 59.3% and rare earth oxide content of 45.2%, the non-magnetic fraction has a high zircon content, the recovery was 70.6% and grade of 91.8 wt%.

Thermodynamic Barrier for Nanoparticle Penetration into Nanotubes

It is promising yet challenging to develop efficient methods to separate nanoparticles (NPs) with nanochannel devices. Herein, in order to guide and develop the separation method, the thermodynamic mechanism of NP penetration into solvent-filled nanotubes is investigated by using classical density functional theory. The potential of mean force (PMF) is calculated to evaluate the thermodynamic energy barrier for NP penetration into nanotubes. The accuracy of the theory is validated by comparing it with parallel molecular dynamics simulation. By examining the effects of nanotube size, solvent density, and substrate wettability on the PMF, we find that a large tube, a low bulk solvent density, and a solvophilic substrate can boost the NP penetration into nanotubes. In addition, it is found that an hourglass-shaped entrance can effectively improve the NP penetration efficiency compared with a square-shaped entrance. Furthermore, the minimum separation density of NPs in solution is identified, below which the NP penetration into nanotubes requires an additional driving force. Our findings provide fundamental insights into the thermodynamic barrier for NP penetration into nanotubes, which may provide theoretical guidance for separating two components using microfluidics.

Highly Sensitive Fluorescence-Linked Immunosorbent Assay for the Determination of Human IgG in Serum Using Quantum Dot Nanobeads and Magnetic Fe3O4 Nanospheres

The aim of this study is to establish a new method with high sensitivity, accuracy, and stability for the determination of human IgG and then expand it to analyze severe acute respiratory syndrome corona virus 2 (SARS-CoV-2)-specific IgM and IgG, which is of great significance for the screening and diagnosis of COVID-19. In this study, the magnetic Fe3O4 nanospheres coupled with mouse antihuman IgG (Ab1IgG) were used as an immune capture probe (Fe3O4@Ab1IgG) to capture and separate the target, and rabbit antihuman IgG (Ab2IgG) coupled with highly luminescent quantum dot nanobeads (QBs) as a fluorescence detection probe (QBs@Ab2IgG) was used to realize high sensitivity detection. After the formation of a sandwich immunocomplex, the fluorescence intensity of the precipitate after magnetic separation was measured at the excitation wavelength of 370 nm. Under optimal conditions, a wide linear range varying from 0.005 to 40 ng·mL-1 was obtained for the detection of human IgG with a lower limit of detection at 4 pg·mL-1 (S/N = 3). The recoveries of intra- and interassays were 90.0-101.9 and 96.0-106.6%, respectively, and the relative standard deviations were 6.3-10.2 and 2.6-10.5%, respectively. Furthermore, the proposed method was successfully demonstrated to detect human IgG in serum samples, and the detection results were not statistically different (P > 0.05) from commercial enzyme-linked immunosorbent assay kits. This method is sensitive, fast, and accurate, which could be expanded to detect the specific IgM and IgG antibodies against SARS-CoV-2.

Assessment of Cellular Uptake Efficiency According to Multiple Inhibitors of Fe3O4-Au Core-Shell Nanoparticles: Possibility to Control Specific Endocytosis in Colorectal Cancer Cells

Magnetite (Fe₃O₄)-gold (Au) core-shell nanoparticles (NPs) have unique magnetic and optical properties. When combined with biological moieties, these NPs can offer new strategies for biomedical applications, such as drug delivery and cancer targeting. Here, we present an effective method for the controllable cellular uptake of magnetic core-shell NP systems combined with biological moieties. Vimentin, which is the structural protein, has been biochemically confirmed to affect phagocytosis potently. In addition, vimentin affects exogenic materials internalization into cells even though under multiple inhibitions of biological moieties. In this study, we demonstrate the cellular internalization performance of Fe₃O₄-Au core-shell NPs with surface modification using a combination of biological moieties. The photofluorescence of vimentin-tagged NPs remained unaffected under multiple inhibition tests, indicating that the NPs were minimally influenced by nystatin, dynasore, cytochalasin D, and even the Muc1 antibody (Ab). Consequently, this result indicates that the Muc1 Ab can target specific molecules and can control specific endocytosis. Besides, we show the possibility of controlling specific endocytosis in colorectal cancer cells.

Magnetic Processing of Diamagnetic Materials

Currently, materials scientists and nuclear magnetic resonance spectroscopists have easy access to high magnetic fields of approximately 10 T supplied by superconducting magnets. Neodymium magnets that generate magnetic fields of approximately 1 T are readily available for laboratory use and are widely used in daily life applications, such as mobile phones and electric vehicles. Such common access to magnetic fields-unexpected 30 years ago-has helped researchers discover new magnetic phenomena and use such phenomena to process diamagnetic materials. Although diamagnetism is well known, it is only during the last 30 years that researchers have applied magnetic processing to various classes of diamagnetic materials such as ceramics, biomaterials, and polymers. The magnetic effects that we report herein are largely attributable to the magnetic force, magnetic torque, and magnetic enthalpy that in turn, directly derive from the well-defined magnetic energy. An example of a more complex magnetic effect is orientation of crystalline polymers under an applied magnetic field; researchers do not yet fully understand the crystallization mechanism. Our review largely focuses on polymeric materials. Research topics such as magnetic effect on chiral recognition are interesting yet beyond our scope.