Waste derived modified biochar as promising functional material for enhanced water remediation potential

The waste management and water purification are daunting environmental challenges. Biochar, a carbonaceous material prepared from diverse organic waste (agricultural, household residues and municipal sewage sludge) has garnered substantial attention due to its excellent attributes, including carbon content, cation exchange efficacy, ample specific surface area, and structural robustness. Thus, the present review comprehensively analyzes bio waste-derived biochar with a particular emphasis on water remediation applications. This article primarily delves into various strategies for modifying biochar, elucidating the underlying mechanisms behind these modifications and their potential for bolstering pollutant removal efficiency. Furthermore, it addresses the impact of functionalization on both biochar stability and cost for commercialization. Lastly, the article outlines key developments, SWOT analysis, and future prospects, offering insights into the practical execution of biochar applications at a larger scale. Therefore, this article paves the way for future research to deepen the understanding of modified biochar with mechanisms for exploring water remediation applications in a more sustainable manner.

Enhanced TC degradation by persulfate activation with carbon-coated CuFe2O4: The radical and non-radical co-dominant mechanism, DFT calculations and toxicity evaluation

Facing the constraints of critical agglomeration and poor reusability of CuFe2O4 in catalytic applications, the feasibility of synthesizing a composite catalyst using carbon coating technology for efficient TC removal with enhanced PDS activity was investigated. The composite catalyst (CuFe2O4@C) can stimulate both radical (SO4•- and HO•) and non-radical (1O2) pathways to dominate the catalytic reaction for removing 95.7% of the TC in 60 min. Meanwhile, the defective structure of the external carbon layer protected the internal CuFe2O4 from excessive oxidation, allowing the CuFe2O4@C to maintain over 90% TC removal after 5 cycles with less interference from inorganic anions, demonstrating significant catalytic performance and satisfactory reusability. Finally, the DFT calculations and TEST evaluation were performed to discuss the structural properties of TC and its toxicity assessment during the whole degradation process, while three possible degradation pathways were proposed. Significantly, the carbon-coated composite catalysts of potential universal applicability for multi-pathway PDS activation offered an attractive new strategy for the effective degradation of antibiotic wastewater.

Activation of peroxymonosulfate by biochar-supported Fe3O4 derived from oily sludge to enhance the oxidative degradation of tetracycline hydrochloride

Carbon materials used for catalysis in advanced oxidation processes tend to be obtained from cheap and readily available raw materials. We constructed a carbon material, OSC@Fe3O4, by loading Fe3O4 onto the pyrolyzed hazardous waste oily sludge. OSC@Fe3O4 was then used to activate peroxymonosulfate (PMS) for the removal of tetracycline hydrochloride (TTCH) from water. At 298 K, 0.2 g⋅L-1 of catalyst and 0.3 g⋅L-1 of PMS, the reaction rate constant of the OSC@I-2/PMS system reached 0.079 min-1, with a TTCH removal efficiency of 92.6%. The degradation efficiency of TTCH remained at 81% after five cycles. The specific surface area and pore volume of OSC@I-2 were 263.9 m2⋅g-1 and 0.42 cm3⋅g-1, respectively, which improved the porous structure of the carbon material and provided more active points, thus improving the catalytic performance. N and S were doped into the oily sludge carbon due to the presence of N- and S-containing compounds in the raw oily sludge. N and S doping led to more electron-rich sites with higher negative charges in OSC@I-2 and gave the oily sludge carbon a higher affinity to PMS, thereby promoting its ability to activate PMS. Sulfate radicals (SO4•‾) played a dominant role in the degradation of TTCH, with demethylation and the breaking of double bonds being a possible degradation pathway. A biotoxicity test showed that the microbial toxicity of the degradation intermediates was significantly reduced. This work provides a strategy for the application of PMS-based catalysts derived from waste carbon resources.

Insights into Enhanced Peroxydisulfate Activation with B and Fe Co-Doped Biochar from Bark for the Rapid Degradation of Guaiacol

A boron and iron co-doped biochar (B-Fe/biochar) from Masson pine bark was fabricated and used to activate peroxydisulfate (PDS) for the degradation of guaiacol (GL). The roles of the dopants and the contribution of the radical and non-radical oxidations were investigated. The results showed that the doping of boron and iron significantly improved the catalytic activity of the biochar catalyst with a GL removal efficiency of 98.30% within 30 min. The degradation of the GL mainly occurred through the generation of hydroxyl radicals (·OHs) and electron transfer on the biochar surface, and a non-radical degradation pathway dominated by direct electron transfer was proposed. Recycling the B-Fe/biochar showed low metal leaching from the catalyst and satisfactory long-term stability and reusability, providing potential insights into the use of metal and non-metal co-doped biochar catalysts for PDS activation.

Synchronous decomplexation and mineralization of copper complexes by activating peroxymonosulfate with magnetic bimetallic biochar derived from municipal sludge

Efficient removal of copper complexes is a challenging issue due to their robust stability and solubility. In this study, CoFe2O4-Co0 loaded sludge-derived biochar (MSBC), a magnetic heterogeneous catalyst, was prepared to activate peroxymonosulfate (PMS) for the decomplexation and mineralization of some typical copper complexes (including Cu(Ⅱ)-EDTA, Cu(Ⅱ)-NTA, Cu(Ⅱ)-citrate, and Cu(Ⅱ)-tartrate). The results showed that abundant cobalt ferrite and cobalt nanoparticles were decorated in the plate-like carbonaceous matrix, making it a higher degree of graphitization, better conductivity and more excellent catalytic activity than the raw biochar. Cu(Ⅱ)-EDTA was chosen as the representative copper complex. Under the optimum condition, the decomplexation and mineralization efficiency of Cu(Ⅱ)-EDTA in MSBC/PMS system were 98% and 68% within 20 min, respectively. The mechanistic investigation confirmed that the activation of PMS by MSBC followed both a radical pathway contributed by SO4•- and •OH and a nonradical pathway contributed by 1O2. In addition, the electron transfer pathway between Cu(Ⅱ)-EDTA and PMS facilitated the decomplexation of Cu(Ⅱ)-EDTA. Jointly, CO, Co0, and the redox cycles of Co(Ⅲ)/Co(Ⅱ) and Fe (Ⅲ)/Fe (Ⅱ) were found to play a critical role in the decomplexation process. Overall, the MSBC/PMS system provides a new strategy for efficient decomplexation and mineralization of copper complexes.

Applications, impacts, and management of biochar persistent free radicals: A review

Biochar is a promising environmental contaminant remediation agent because of its adsorptive and catalytic properties. However, the environmental effects of persistent free radicals (PFRs) produced by biomass pyrolysis (biochar production) are still poorly understood, though they have received increasing research attention in recent years. Although PFRs both directly and indirectly mediate biochar's removal of environmental pollutants, they also have the potential to cause ecological damage. In order to support and sustain biochar applications, effective strategies are needed to control the negative effects of biochar PFRs. Yet, there has been no systematic evaluation of the environmental behavior, risks, or management techniques of biochar PFRs. Thus, this review: 1) outlines the formation mechanisms and types of biochar PFRs, 2) evaluates their environmental applications and potential risks, 3) summarizes their environmental migration and transformation, and 4) explores effective management strategies for biochar PFRs during both production and application phases. Finally, future research directions are recommended.

Efficient degradation of sulfamethoxazole in various waters with peroxymonosulfate activated by magnetic-modified sludge biochar: Surface-bound radical mechanism

First time, this study synthesized a magnetic-modified sludge biochar (MSBC) as an activator of peroxymonosulfate (PMS) to eliminate sulfamethoxazole (SMX). The removal efficiency of SMX reached 96.1% at t = 60 min by PMS/MSBC system. The larger surface area and magnetic Fe₃O₄ of MSBC surface enhanced its activation performance for PMS. The PMS decomposition, premixing and reactive oxygen species (ROS) identification experiments combined with Raman spectra analysis demonstrated that the degradation process was dominated by surface-bound radicals. The transformed products (TPs) of SMX and the main degradation pathways were identified and proposed. The ecotoxicity of all TPs was lower than that of SMX. The magnetic performance was beneficial for its reuse and the removal efficiency of SMX was 83.3% even after five reuse cycles. Solution pH, HCO₃^- and CO₃^2- were the critical environmental factors affecting the degradation process. MSBC exhibited environmental safety for its low heavy metal leaching. PMS/MSBC system also performed excellent removal performance for SMX in real waters including drinking water (88.1%), lake water (84.3%), Yangtze River water (83.0%) and sewage effluent (70.2%). This study developed an efficient PMS activator for SMX degradation in various waters and provided a workable way to reuse and recycle municipal sludge.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.

Application of FeS-activated persulfate oxidation system for the degradation of tetracycline in aqueous solution

Tetracycline (TC), an antibiotic used to treat bacterial infectious diseases, is easily transferred to environmental matrixes and then sparks environmental concerns. In this study, TC was selected as a target pollutant to investigate the degradation performance of persulfate (PS) based advanced oxidation processes (AOPs) using FeS as the activator (FeS/PS). The results showed that with optimal PS and FeS concentrations of 1 mM and a pseudo-second-order rate constant (k₂) of 3.45 L mmol^-1 min^-1, 91.39% of TC, was effectively removed within 60 min. From the perspective of degradation rate, apart from CO₃^2-, TC decompositions by FeS/PS were hardly disturbed by the coexistence of different concentrations of Cl^-, NO₃^-, SO₄^2-, and humin acid. The degradation of TC under the O₂ bubbling, N₂ bubbling, and light-proof conditions also had limited effects on these AOPs. In addition, FeS exhibited excellent stability and recyclability when used as a PS activator for TC removal. The PS activated by old FeS and used FeS showed nearly identical performances on TC removal compared with the fresh FeS. It is suggested that homogeneous and heterogeneous reactions are jointly responsible for TC oxidation by FeS/PS. With the contributions of the generated, highly reactive SO₄^-•, and, in particular, •OH, TC enabled the mineralization of inorganic products eventually. Therefore, FeS/PS is highly recommended as an alternative AOPs in the future for TC-contaminated wastewater purification.

The adsorption affinity of N-doped biochar plays a crucial role in peroxydisulfate activation and bisphenol A oxidative degradation

Metal-free biochar to activate persulfate and degrade organic contaminants has attracted great attention in advanced oxidation processes, while the role of biochar adsorption in the activation and oxidative decomposition process still needed to be further clarified. In this study, nitrogen-doped porous biochar derived from a waste litchi branch was prepared as a peroxydisulfate (PDS) activator for bisphenol A (BPA) degradation, in which the regulation behavior of biochar adsorption was evaluated on the basis of phase distribution and PDS activation mechanism. N-doped biochar obtained at 800 °C with urea and sodium bicarbonate added presented a high specific surface area (821 m2/g), abundant nanopores, and a graphitic structure, and showed the best adsorption capacity and catalytic activity toward BPA. At a dosage of 0.15 g/L NBC-800, 95% BPA can be completely degraded within 60 min with an apparent rate constant (kobs) of 0.0483 min-1. The identified active sites and reactive oxygen species as well as electrochemical tests suggested that both free radicals O2•- and •OH and nonradical pathways including 1O2 originated from C = O and surface electron-transfer mechanisms were involved in BPA decomposition. The experiments and activation mechanisms all confirmed that BPA adsorption on the NBC-800 surface was an extremely crucial step for BPA oxidative degradation.

A critical review on biochar-based catalysts for the abatement of toxic pollutants from water via advanced oxidation processes (AOPs)

Proper waste disposal is a key towards sustainable development. Wastewater treatment is delineated by the application of efficient, economic and novel catalysts. Biochar is derived from the thermochemical conversion of biomass or any carbonaceous materials and is considered as one of the most eco-friendly substitute for activated carbon. Owing to its large surface area, porosity, crystallinity and active functional groups, the biochar-based catalysts has been extensively applied for the abatement of toxic pollutants from wastewater streams. While most of the reviews focus on the adsorptive properties of the biochar, this review critically analyses the recent development of biochar-based catalysts in the field of advanced oxidation processes (Fenton-like systems, photocatalytic and sonocatalytic systems). The presence of persistent free radicals and oxygen-containing functional groups renders biochar to act as catalyst. The mechanisms accompanying catalytic performance of biochar-based catalysts have also been reviewed. However, the research in this area is quite at an initial phase, and many advancements schemes are essential prior to scale-up and commercialization. Future researches should be devoted to more efficient and rigorous understanding of the structural properties of biochar to engineer the catalytic degradation of targeted pollutants in wastewater treatment.

A critical review on utilization of sewage sludge as environmental functional materials

Sewage sludge (SS) is increasingly used as an environment functional material to reduce or control pollution and improve plant growth because of the large amounts of carbon and essential plant nutrients in it. To achieve the best application results, it is essential to comprehensively review recent progress in SS utilization. This review aims to fill the gaps in knowledge by describing the properties of SS, and its usage as adsorbents, catalysts and fertilizers, and certain application mechanisms. Although SS generates several benefits for the environment and humans, many challenges still exist to limit the application, including the risks posed by potentially toxic substances (e.g., heavy metals) in SS. Therefore, future research directions are discussed and how to make SS applications more feasible in terms of technology and economy.

Fe-biochar as a safe and efficient catalyst to activate peracetic acid for the removal of the acid orange dye from water

Pollution of wastewater and natural waters by organic contaminants is a major health issue, yet actual remediation methods are limited by incomplete removal of recalcitrant contaminants and by secondary pollution by chlorinated contaminants and catalytic metals. To attempt to solve these issues, we tested the removal of acid orange by peracetic acid (PAA), a safe oxidant, activated by Fe-biochar that iron anchored on biochar to prevent secondary pollution by iron. Fe-biochar was synthesized using a simple, one-step pyrolysis method. We investigated the effects of PAA concentration, pH, humic acids, chloride, bicarbonate on the reaction. Radical quenching and electron paramagnetic resonance were used to identify reacting species. Results showed that the granulous structure of Fe-biochar and the presence of Fe, Fe₃O₄, Fe₂O₃, and Fe₃C on Fe-biochar surface. The highest removal of acid orange of 99.9% was obtained with 1.144 mM PAA and 0.3 g/L Fe-biochar at pH 7. Acid orange removal increases with Fe-biochar dose, decreases with pH, is slightly inhibited by humic acids and bicarbonate, and is not modified by chloride. Our experimental results suggested that CH₃C(O)OO· and CH₃C(O)O· are the main radical species, but there may also be non-radical effects in Fe-biochar/PAA process. Fe-biochar displayed high re-usability, with 92.8% removal after five uses.

Facile synthesis of magnetic ZnFe2O4/AC composite to activate peroxydisulfate for dye degradation under visible light irradiation

Heterogeneous photocatalysis/persulfate oxidation process has been considered as a promising technology for dye contaminants removal. The magnetic ZnFe₂O₄/active carbon (AC) composites were hydrothermally synthesized and firstly used to activate peroxydisulfate (PDS) for rhodamine B (RhB) degradation under visible LED light irradiation. The optimized Vis-ZnFe₂O₄/AC(4/1)-PDS system can enhance the RhB degradation efficiency by 32.01% and 13.87% compared with Vis-ZnFe₂O₄-PDS and Vis-AC-PDS systems, respectively. The influence of operational parameters such as catalyst dosage (0.2 - 0.4 g L^-1), PDS concentration (1.0 - 2.0 g L^-1), temperature (25 - 45 °C), solution pH (2.7 - 10.9), and coexisting inorganic ions (Cl^-, NO₃^-, HCO₃^-, PO₄^3-, Cu²⁺, Fe³⁺, and Ca²⁺) on RhB degradation was studied, and 100% of RhB (20 mg L^-1) was degraded after 80 min at operational condition: 0.30 g L^-1 of ZnFe₂O₄/AC(4/1) and 1.5 g L^-1 of PDS, solution pH of 2.74, reaction temperature of 25 °C. The quenching experiments, EPR test, and XPS analysis were employed to reveal the proposed mechanism, which demonstrated that ¹O₂ played a more important role than other reactive species (SO₄^•-, •OH, O₂^•-, and h⁺) in RhB degradation. The generation of ¹O₂ via the two routes was as follows: (i) the in situ formed active oxygen (O^*) reacted with HSO₅^- to produce ¹O₂; (ii) O₂^•- was oxidized by h⁺ to form ¹O₂. After five consecutive cycles, the photodegradation efficiency of RhB by ZnFe₂O₄/AC(4/1) catalyst slightly decreased from 88.52 to 83.92%, indicating the excellent reusability of ZnFe₂O₄/AC(4/1) photocatalyst. As designed, Vis-ZnFe₂O₄/AC-PDS oxidation system can effectively remove RhB from the different real water matrices, and the degradation efficiency of RhB in tap water, river water, and secondary effluent was 78.24%, 79.55%, and 74.53% after 80 min of reaction, respectively.

Adsorption performance of tetracycline by the biomass ash derived from the pyrolysis of FeCl3-activated municipal sludge without gas protection

The municipal sludge activated by FeCl3 solution was pyrolyzed at 500 °C without gas protection, and the pyrolysis products, named as biomass ash, could effectively adsorb tetracycline (TC) from aqueous solution. Different FeCl3 concentrations could directly affect the physicochemical properties of the biomass ash, so that the biomass ash as adsorbent showed different adsorption efficiency toward TC. The activation of FeCl3 increased the oxygen-containing functional groups and surface polarities of the biomass ash. When the concentration of FeCl3 solution was 0.5 mol/L, the biomass ash behaved the maximum specific surface area (37.74 m2/g) and the best adsorption efficiency. The pseudo-second-order kinetics model and the Freundlich multi-molecule model could fully explain the TC adsorption process by the biomass ash pyrolyzed from municipal sludge activated by FeCl3. Moreover, the adsorption mechanism was mainly attributed to the chemical adsorption.

A sustainable reuse strategy of converting waste activated sludge into biochar for contaminants removal from water: Modifications, applications and perspectives

Conversion of sewage sludge to biochar for contaminants removal from water achieves the dual purpose of solid waste reuse and pollution elimination, in line with the concept of circular economy and carbon neutrality. However, the current understanding of sludge-derived biochar (SDB) for wastewater treatment is still limited, with a lack of summary regarding the effect of modification on the mechanism of SDB adsorption/catalytic removal aqueous contaminants. To advance knowledge in this aspect, this paper systematically reviews the recent studies on the use of (modified) SDB as adsorbents and in persulfate-based advanced oxidation processes (PS-AOPs) as catalysts for the contaminants removal from water over the past five years. Unmodified SDB not only exhibits stronger cation exchange and surface precipitation for heavy metals due to its nitrogen/mineral-rich properties, but also can provide abundant catalytic active sites for PS. An emphatic summary of how certain adsorption removal mechanisms of SDB or its catalytic performance in PS-AOPs can be enhanced by targeted regulation/modification such as increasing the specific surface area, functional groups, graphitization degree, N-doping or transition metal loading is presented. The interference of inorganic ions/natural organic matter is one of the unavoidable challenges that SDB is used for adsorption/catalytic removal of contaminants in real wastewater. Finally, this paper presents the future perspectives of SDB in the field of wastewater treatment. This review can contribute forefront knowledge and new ideas for advancing sludge treatment toward sustainable green circular economy.

Applications and influencing factors of the biochar-persulfate based advanced oxidation processes for the remediation of groundwater and soil contaminated with organic compounds

Biochar (BC) is a low-cost material rich in carbon, which is being used increasingly as a catalyst in persulfate-based advanced oxidation processes (PS-AOPs) for the remediation of groundwater and soil contaminated with organic compounds. In this work, a general summary of preparation methods and applications of various BC (i.e., pristine BC, magnetic BC, and chemically modified BC) in PS-AOPs is presented. Different influence factors (e.g., pH, anions, natural organic matter) for the degradation of organic compounds are discussed. Meanwhile, the influence of external energy (e.g., solar irradiation, UV-Vis, ultrasonic) is also mentioned. Furthermore, the advantage of different BC in PS-AOPs are compared. Finally, potential problems, challenges, and prospects in the application of biochar-persulfate based advanced oxidation processes (BCPS-AOPs) are discussed in the conclusion and perspective.

Effects of foreign metal doping on the step-by-step oxidation process in M-OMS-2 catalyzed activation of PMS

Various metal cations M (M = Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe³⁺) were doped into the tunnel of manganese octahedral molecular sieve (OMS-2). Redox-inactive metal (Ca, Mg and Zn) doped OMS-2 exhibited better peroxymonosulfate (PMS) catalytic activity than redox metal-doped Cu-OMS-2 and Fe-OMS-2. Redox-inactive metals doping improves the conductivity and reducibility of the catalyst, while transition metal doping reduces the dispersion of manganese. More importantly, the degradation of ACE can be divided into two stages. In the first stage, ACE was oxidized dominantly through mediated electron transfer process. Subsequently, singlet oxygen (¹O₂) gradually dominated oxidative degradation in the second stage, which was derived from the reaction between superoxide radical (O₂^•-) and metastable manganese intermediates. The long half-life of O₂^•- on the surface of OMS-2 ensured the delay generation of ¹O₂. This study not only provides a new idea for improving the efficiency of heterogeneous catalysts activation of PMS, but also meaningful for the in-depth study of multiple reaction mechanisms in PMS activation processes.

A review of prospects and current scenarios of biomass co-pyrolysis for water treatment

With ever-growing population comes an increase in waste and wastewater generated. There is ongoing research to not only reduce the waste but also to increase its value commercially. One method is pyrolysis, a process that converts wastes, at temperatures usually above 300 °C in a pyrolysis unit, to carbon-rich biochars among with other useful products. These chars are known to be beneficial as they can be used for water treatment applications; certain studies also reveal improvements in the biochar quality especially on the surface area and pore volume by imparting thermal and chemical activation methods, which eventually improves the uptake of pollutants during the removal of inorganic and organic contaminants in water. Research based on single waste valorisation into biochar applications for water treatment has been extended and applied to the pyrolysis of two or more feedstocks, termed co-pyrolysis, and its implementation for water treatment. The co-pyrolysis research mainly covers activation, applications, predictive calculations, and modelling studies, including isotherm, kinetic, and thermodynamic adsorption analyses. This paper focuses on the copyrolysis biochar production studies for activated adsorbents, adsorption mechanisms, pollutant removal capacities, regeneration, and real water treatment studies to understand the implementation of these co-pyrolyzed chars in water treatment applications. Finally, some prospects to identify the future progress and opportunities in this area of research are also described. This review provides a way to manage solid waste in a sustainable manner, while developing materials that can be utilized for water treatment, providing a double target approach to pollution management.

Tetracycline Adsorption on Magnetic Sludge Biochar: Effects of pH, Humic Acid (HA), and Fulvic Acid (FA)

Natural organic matters (NOMs) are ubiquitous in the environment, but few systematic studies have examined the influence of NOMs on the sorption ability of magnetic sludge biochar. In this study, magnetic sludge biochar was synthesized, characterized, and used as a sorbent to remove tetracycline (TC) from aqueous solutions. The effects of pH, humic acid (HA), and fulvic acid (FA) on TC adsorption by magnetic sludge biochar were studied using batch experiments. Adding HA and FA can alter the adsorption behavior of TC, except for its pH dependency. The results of this study show that relatively low concentrations of dissolved HA (≤8 ppm) and FA (≤5 ppm) promote the adsorption capacity of TC, but higher concentrations compete against TC for sorption sites on the surface of magnetic sludge biochar. The results of this study promote a better understanding of the application of magnetic sludge biochar in real antibiotic wastewater.

Co-catalysis of trace dissolved Fe(iii) with biochar in hydrogen peroxide activation for enhanced oxidation of pollutants

Activation of hydrogen peroxide (H₂O₂) with biochar is a sustainable and low-cost approach for advanced oxidation of organic pollutants, but faces the challenge of a low yield of hydroxyl radical (˙OH). Herein, we hypothesize that the activation efficiency of H₂O₂ can be enhanced through co-catalysis of trace dissolved iron (Fe) with biochar. Two biochar samples derived from different feedstock, namely LB from liquor-making residue and WB from wood sawdust, were tested in the co-catalytic systems using trace Fe(iii) (0.3 mg L⁻¹). The cumulative ˙OH production in [Fe(iii) + LB]/H₂O₂ was measured to be 3.28 times that in LB/H₂O₂, while the cumulative ˙OH production in [Fe(iii) + WB]/H₂O₂ was 11.9 times that in WB/H₂O₂. No extra consumption of H₂O₂ was observed in LB/H₂O₂ or WB/H₂O₂ after addition of trace Fe(iii). Consequently, the reaction rate constants (k_obs) for oxidation of pollutants (2,4-dichlorophenoxyacetic acid and sulfamethazine) were enhanced by 3.13–9.16 times. Other iron species including dissolved Fe(ii) and iron minerals showed a similar effect on catalyzing 2,4-D oxidation by biochar/H₂O₂. The interactions involved in adsorption and reduction of Fe(iii) by biochar in which the defects acted as electron donors and oxygen-containing functional groups bridged the electron transfer. The fast regeneration of Fe(ii) in the co-catalytic system resulted in the sustainable ˙OH production, thus the efficient oxidation of pollutants comparable to other advanced oxidation processes was achieved by using dissolved iron at a concentration as low as the concentration that can be found in natural water.

The yield of ˙OH and oxidation of pollutants by biochar/H₂O₂ were enhanced dramatically by trace dissolved Fe(iii).

Mechanistic insights of removing pollutant in adsorption and advanced oxidation processes by sludge biochar

With the accelerated industrialization, more and more sewage sludge (SS) needs to be treated properly. The conversion of sludge into harmless biochar material with dual utilization value of adsorption and catalysis by pyrolysis is in line with the concept of sustainable development. However, the reaction mechanisms of pristine sludge biochar (SDBC) and its composites (SDBCs) in adsorption, persulfate (PS), and Fenton-like advanced oxidation processes (AOPs) are very closely related to its adsorption performance and catalytic efficiency. In this paper, from the application mechanisms of SDBC in adsorption and AOPs, we review in detail the common methods for synthesizing SDBC and their characteristics. We discuss the synthesis techniques that affect the structural, chemical, and catalytic properties of SDBC, including gasification, pyrolysis, and hydrothermal carbonation (HTC). The pyrolysis temperature, environmental factors, and sludge characteristics have important effects on the properties of SDBC, leading to different mechanisms in adsorption and catalytic processes. Furthermore, this paper systematically generalizes the mechanisms of SDBCs in adsorption, where π-π interactions and electrostatic attractions are the main adsorption mechanisms. Then, activation mechanisms of SDBCs in PS and Fenton-like AOPs systems are discussed, including free radical pathways and non-free radical pathways. Finally, we present several challenges and perspectives for the application of SDBC and SDBCs in the field of adsorption, PS, and Fenton-like AOPs from the mechanistic point of views.

Desorption characteristics of phosphate and ammonium from sludge-based biochar

It is effective to adsorb phosphate and ammonium from water by sludge-based biochar, while the desorption performance has not been studied systematically. Biochar in this study was prepared through the co-pyrolysis of sludge and walnut shells to remove NH4+ and PO43- from water. The desorption characteristics of NH4+ and PO43- from the post-adsorption sludge-based biochar were investigated. The effects of the adsorption condition (concentration of adsorption solution) and desorption conditions (pH value of desorption solution and desorption temperature and time) on desorption performance were examined. Several techniques were performed to characterise the properties of the post-adsorption sludge-based biochar. The adsorption amount of the pure sewage sludge biochar (SBC) for PO43- and the biochar derived from the co-pyrolysis of sewage sludge and walnut shell with the mixing ratio of 3:1 (MBC3-1) for NH4+ were 14.19/ 23.75 mg/g and 9.28/ 16.23 mg/g, respectively, when the concentrations of the adsorbates were 100 and 500 mg/L. The desorption experiments showed that the acidic condition (pH = 2) was beneficial for PO43- and NH4+ desorption. The highest desorption ratio reached 7.58% for PO43- and 2.18% for NH4+. The desorption of PO43- was endothermic, whereas that of NH4+ was exothermic. The desorption amounts of PO43- and NH4+ decreased and increased, respectively, with the increase in desorption time. This study of the desorption characteristics of PO43- and NH4+ in sludge-based biochar provides a theoretical basis for the subsequent utilisation of sludge-based biochar.

Effective degradation of COVID-19 related drugs by biochar-supported red mud catalyst activated persulfate process: Mechanism and pathway

With the global spread of the COVID-19 pandemic, the water pollution caused by extensive production and application of COVID-19 related drugs has aroused growing attention. Herein, a novel biochar-supported red mud catalyst (RM-BC) containing abundant free hydroxyl groups was synthesized. The RM-BC activated persulfate process was firstly put forward to degrade COVID-19 related drugs, including arbidol (ARB), chloroquine phosphate, hydroxychloroquine sulfate, and acyclovir. Highly effective removal of these pharmaceuticals was achieved and even 100% of ARB was removed within 12 min at optimum conditions. Mechanism study indicated that SO₄ ^•- and HO^• were the predominant radicals, and these radicals were responsible for the formation of DMPOX in electron spin resonance experiments. Fe species (Fe⁰ and Fe₃O₄) and oxygen-containing functional groups in RM-BC played crucial roles in the elimination of ARB. Effects of degradation conditions and several common water matrices were also investigated. Finally, the degradation products of ARB were identified by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and possible degradation pathways were proposed. This study demonstrated that RM-BC/PS system would have great potential for the removal of COVID-19 related drug residues in water by the catalyst synthesized from the solid waste.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Tetracycline adsorption on magnetic sludge biochar: size effect of the Fe3O4 nanoparticles

Activated sludge, which is difficult and expensive to treat and dispose of, is a key concern in wastewater treatment plants. In this study, magnetic sludge biochar containing activated sludge and different sizes (14.3, 40.2 and 90.5 nm) of Fe3O4 nanoparticles was investigated as an effective adsorbent for tetracycline (TC) adsorption. Magnetic sludge-based biochar was prepared by a facile cross-linking method and characterized by transmission electron microscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and zeta potential analysis. The adsorption performances of TC on three kinds of adsorbents were investigated. Although 14.3 nm Fe3O4 nanoparticles could be inclined to aggregate and partially filled with pores of biochar, it turned out that magnetic sludge biochar with 14.3 nm Fe3O4 nanoparticles exhibited optimum performance for TC removal with adsorption capacity up to 184.5 mg g-1, due to the larger amounts of functional groups and the change of zeta potential. Furthermore, the adsorption kinetics of TC on three kinds of adsorbents were studied, which implied that the pseudo-second-order kinetic model exhibited the better fit for the entire sorption process.

Sustainable remediation of hazardous environmental pollutants using biochar-based nanohybrid materials

Biochar is a well-known carbon material with diversified functionalities and excellent physicochemical characteristics with high wastewater treatment potential. This review aims to summarize recent advancements in the development of biochar and biochar-based nanohybrid materials as a potential tool for the removal of harmful organic compounds such as synthetic dyes/effluents. The formation of biochar using pyrolysis of renewable feedstocks and their applications in various industries are explained hereafter. The characteristics and construction of biochar-based hybrid materials are explained in detail. Diversity of feedstocks, including municipal wastes, industrial byproducts, agricultural, and forestry residues, endows different biochar types with a wide structural variety. The production of cost-effective biochar drives the interest in manipulating biochars and induces desire functionality using nanoscale reinforcements. Various types of biochars, such as magnetic biochar, layered nanomaterial coated biochar, nanometallic oxide composites, chemically and physically functionalized biochar, have been produced. With the aid of nanomaterial, hybrid biochar exhibits a high potential to remove toxic contaminants. Depending upon biochar type, dyes/effluents can be removed via different mechanisms, including the Fenton process, photocatalytic degradation, π-π interaction, electrostatic interaction, and physical adsorption. In conclusion, desired physicochemical features, and tunable surface properties of biochar present high potential material in removing organic dyes and other effluents. The blended biochar with different materials/nanomaterials endows broader development and multi-functional opportunities for treating dyes/effluents.

An Insight into a Sustainable Removal of Bisphenol A from Aqueous Solution by Novel Palm Kernel Shell Magnetically Induced Biochar: Synthesis, Characterization, Kinetic, and Thermodynamic Studies

Recently Bisphenol A (BPA) is one of the persistent trace hazardous estrogenic contaminants in the environment, that can trigger a severe threat to humans and environment even at minuscule concentrations. Thus, this work focused on the synthesis of neat and magnetic biochar (BC) as a sustainable and inexpensive adsorbent to remove BPA from aqueous environment. Novel magnetic biochar was efficiently synthesized by utilizing palm kernel shell, using ferric chloride and ferrous chloride as magnetic medium via chemical co-precipitation technique. In this experimental study, the influence of operating factors comprising contact time (20-240 min), pH (3.0-12.0), adsorbent dose (0.2-0.8 g), and starting concentrations of BPA (8.0-150 ppm) were studied in removing BPA during batch adsorption system using neat biochar and magnetic biochar. It was observed that the magnetically loaded BC demonstrates superior maximum removal efficiency of BPA with 94.2%, over the neat biochar. The functional groups (FTIR), Zeta potential, vibrating sample magnetometer (VSM), surface and textural properties (BET), surface morphology, and mineral constituents (FESEM/EDX), and chemical composition (XRD) of the adsorbents were examined. The experimental results demonstrated that the sorption isotherm and kinetics were suitably described by pseudo-second-order model and Freundlich model, respectively. By studying the adsorption mechanism, it was concluded that π-π electron acceptor-donor interaction (EAD), hydrophobic interaction, and hydrogen bond were the principal drives for the adsorption of BPA onto the neat BC and magnetic BC.

Review of organic and inorganic pollutants removal by biochar and biochar-based composites

Biochar (BC) has exhibited a great potential to remove water contaminants due to its wide availability of raw materials, high surface area, developed pore structure, and low cost. However, the application of BC for water remediation has many limitations. Driven by the intense desire of overcoming unfavorable factors, a growing number of researchers have carried out to produce BC-based composite materials, which not only improved the physicochemical properties of BC, but also obtained a new composite material which combined the advantages of BC and other materials. This article reviewed previous researches on BC and BC-based composite materials, and discussed in terms of the preparation methods, the physicochemical properties, the performance of contaminant removal, and underlying adsorption mechanisms. Then the recent research progress in the removal of inorganic and organic contaminants by BC and BC-based materials was also systematically reviewed. Although BC-based composite materials have shown high performance in inorganic or organic pollutants removal, the potential risks (such as stability and biological toxicity) still need to be noticed and further study. At the end of this review, future prospects for the synthesis and application of BC and BC-based materials were proposed. This review will help the new researchers systematically understand the research progress of BC and BC-based composite materials in environmental remediation.

Burgeoning prospects of biochar and its composite in persulfate-advanced oxidation process

In the last decade, more and more refractory organic contaminants with severe health risks have been detected in the aquatic ecosystem. Sulfate radical (SO₄^·-)-based advanced oxidation process (SR-AOP) is recognized as an efficient approach for the removal of organic contaminants. Biochar (BC) and its composites (BCs) have been applied into SR-AOP for the double advantages of adsorption and catalytic ability. This paper gives systematic emphasis to the development and progress of biochar and its composites as catalyst in persulfate-advanced oxidation process. Synthetic techniques including the directed pyrolysis of mixed materials and post-immersed method are discussed. The physicochemical properties of biochar (such as surface area, surface functional groups, defect structure and persistent free radicals, etc.) that affect persulfate activation are provided. Then, emphasis is placed on the crucial role of biochar in affecting the catalytic property of BCs including stabilizing nanoparticles, expanding the surface area, increasing active sites and regulating electron transfer reactions. Integrating mechanistic insights and different biochar-based catalysts highlight the understanding of persulfate activation and catalytic degradation. Possible challenges are finally proposed in the fundamental research and practically scaled-up application.

Preparation and application of a novel biochar-supported red mud catalyst：Active sites and catalytic mechanism

A novel catalyst RM-BC_(HP) was synthesized by hydrothermal treatment and pyrolysis (800 ℃) using red mud and coconut shells. Influence of different preparation conditions on catalyst performance was explored. SEM showed that RM-BC_(HP) was porous and RM was successfully loaded on the outside surface and inside the pores of BC. XRD revealed that Fe₂O₃ in RM was reduced to Fe⁰ and Fe₃O₄ in the pyrolysis process, in which pyrolysis temperature and addition ratio of coconut shells were critical. TGA-MS, FT-IR and XPS were also applied to character the catalyst. 100% of AO7 was removed within 30 min with conditions of 2 mM PS, 50 mg/L AO7 and 0.5 g/L RM-BC_(HP), and the Fe leaching was negligible. High removal rate was obtained in tap, river, and lake water. RM-BC_(HP)/PS system also exhibited excellent degradation performance for other dyes (MB, MG and RhB) and antibiotics (TC, OTC and CTC). The mechanism studies demonstrated that PS was mainly activated by Fe⁰ and Fe²⁺ in RM-BC_(HP) to produce different radicals, then ¹O₂ was generated by the reactions among these radicals to degrade AO7. Finally, nine intermediate products of AO7 were identified by FT-ICR-MS and a probable degradation pathway was proposed.

Recycling application of modified waste electrolytic manganese anode slag as efficient catalyst for PMS activation

Electrolytic manganese anode slag (EMAS) is the waste residue produced by electrolytic manganese metal industry. At present, no mature recycling system has been established, which causes a waste of resources and threatens the environment. Therefore, the resource utilization of EMAS has attracted increased attention. In this paper, the in-situ resource utilization of EMAS can be realized by pickling treatment was reported. Specifically, EMAS after pickling treatment (PEMAS) was first used as catalyst to activate PMS to degrade tetrachlorophenol (4-CP). Pickling could remove the inert inorganic components on EMAS and increase the specific surface area, pore volume and Mn distribution of the catalyst, thus improving the catalytic performance of the catalyst. Under the conditions of 4-CP of 40 ppm, PMS of 1 mM and PEMAS of 0.3 g L^-1, 85% of 4-CP could be degraded within 50 min. Mechanism studies proved that the main active species were O₂^- and ¹O₂. Some O₂^- contributed to the generation of ¹O₂ and some O₂^- directly contributed to the degradation of 4-CP. During the reaction, the valence state of Mn transformed between Mn(III)/Mn(IV) and Mn(II)/Mn(III) and kept the cycle. Moreover, PEMAS/PMS system exhibited excellent independence of the solution pH, resistance to the versatile inorganic ions and background organic matters, and stability of recycling. In a word, this study has achieved the resource utilization of EMAS and the goal of treating waste with waste, which is a win-win strategy of economic and environmental benefits.

Conversion of sewage sludge into biochar: A potential resource in water and wastewater treatment

Production of biochar from sewage sludge (SS) is consistent with the goal of sustainable resource recovery and promotes a wastewater-based circular economy. Thermochemical conversion of SS to biochar resolves two major issues simultaneously as it minimizes the cost of disposal and acts as a resource to eliminate the toxic contaminants from water and wastewater. The reusability and ready availability of the biochar, irrespective of the season, makes it an economically viable material for wastewater treatment. In this review, explicit insights into the production, modification and usage of SS derived biochar are provided including (i) the production yield, (ii) characteristic features such as physical, chemical, electrochemical and morphological aspects, and (iii) impact on contaminant removal through adsorption, catalytic and electrochemical processes. Particular attention is given to the use of SS derived biochar as an adsorbent for contaminants present in wastewaters, the potential use of biochar as a catalyst and support material in advanced oxidation processes and the use of biochars as an electrode material. The effect of pyrolysis conditions and co-pyrolysis with other materials on biochar properties is explored and insight is provided into the toxicity of biochar components present at different process conditions.

Preparation of biochar and biochar composites and their application in a Fenton-like process for wastewater decontamination: A review

Biochar is a carbon-rich material that can be obtained from pyrolysis of solid waste (e.g., agricultural solid waste and sludge from wastewater treatment plants). Biochar features low cost, large specific surface area, and strong adsorption capacity. New biochar composites can be produced via modification and loading of nano particles onto biochar. Biochar can contribute to the dispersion and stabilization of nano particles. In addition, nano particles can increase the number of surface-active sites, which improves the physicochemical properties of the material. Biochar and biochar composites have been applied widely in wastewater treatment, and have significantly enhanced the treatment performance of Fenton-like processes (activation of hydrogen peroxide and persulfate) as an advanced oxidation process for organics removal and wastewater decontamination. This paper reviews the preparation methods for biochar and biochar composites to systematically analyze the influential factors on the preparation process. The paper also comprehensively reviews the mechanisms by which biochar removes different organic pollutants. However, due to the vast number of different biochar feedstocks and their preparation methods, it is difficult to compare the properties of one biochar to another. Guidance if provided for the application of biochar and biochar composites for wastewater decontamination.

P-nitrophenol degradation by pine-wood derived biochar: The role of redox-active moieties and pore structures

Biochar can both adsorb and degrade p-nitrophenol (PNP); however, the PNP degradation mechanism has not been well investigated. We prepared two biochars at pyrolysis temperatures of 500 °C (B500) and 700 °C (B700). Although B500 showed much stronger free radical signals (which are associated with organic degradation, according to previous studies), the apparent PNP degradation was approximately 3 times higher in the B700 system. The degradation increased significantly after the biochars were washed with water. According to a quantitative analysis of the sorption and degradation and two-compartment first-order kinetics modeling of the apparent removal kinetics, sorption occurred mainly in the initial period, whereas degradation continued throughout the removal process. The PNP degradation rate constant depended mainly on the external surface area at a relatively low concentration (200 mg/L) and was controlled by the microporous surface area at a relatively high concentration (800 mg/L). In addition, the apparent degradation did not depend on the biochar particle size. Therefore, PNP degradation may be related to the three-dimensional structure of the biochar in addition to the exposed external surface. The well-developed pore structure, more accessible surface, and larger electron exchange capacity of B700 may promote electron transfer between the biochar and PNP, and thus accelerate PNP degradation. This study demonstrates that various properties of the biochar may contribute to PNP degradation.

Red mud modified sludge biochar for the activation of peroxymonosulfate: Singlet oxygen dominated mechanism and toxicity prediction

In this paper, red mud-sewage sludge derived biochar (RSDBC) was synthesized and employed as the heterogenous activator of peroxymonosulfate (PMS) for sulfamethoxazole (SMX) degradation. With the incorporation of red mud, 82.5% degradation of SMX was achieved by RSDBC/PMS system in a process dominated by ¹O₂, which was attributed to the participation of oxygen vacancy, ketone groups and graphitic carbon. On the other hand, in the absence of red mud, OH and SO₄^•- were dominantly accounted for SMX degradation in sewage sludge derived biochar (SDBC)/PMS system. In this case heterogeneous Fe species, ketone groups and graphitic carbon were responsible for PMS activation. Due to the different Reactive Oxygen Species (ROS), effects of reaction conditions including initial pH, common anions and natural organic matter (NOM) were not in full accord. Besides, Fe leaching from RSDBC (0.67 ppm) was much lower than that of SDBC (3.07 ppm), leading to a better reuse ability for RSDBC. Less degradation intermediates were disclosed in RSDBC/PMS system, along with lower residual toxicity. In addition, eco-toxicity of all the intermediates was predicted by ECOSAR program for the further understanding of the detoxification of SMX. Advantages of RSDBC/PMS system as disclosed in this paper further suggest its potential full-scale application of environmental remediation.

Surface-Modified Sewage Sludge-Derived Carbonaceous Catalyst as a Persulfate Activator for Phenol Degradation

In this study, a catalytic persulfate oxidation process comprising sodium persulfate (PS) and modified sewage sludge-derived carbonaceous catalysts was tested for the degradation of phenol. Sludge-based biochar was modified by high-temperature treatment combined with hydrochloric acid oxidation. The surface properties of carbonaceous catalysts before and after modification were characterized by elemental analysis, N₂ isothermal adsorption-desorption, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The effects of reaction parameters including catalyst dosage, PS/phenol molar ratio, initial pH and reaction temperature on the degradation rate of phenol were investigated. The kinetics of phenol transformation was explored and the reaction rate appeared pseudo first-order kinetics. In SS-600-HCl/PS system, 91% phenol could be efficiently degraded under certain reaction conditions ([phenol]₀ = 100 mg/L, catalyst dosage = 0.8 g/L, PS/phenol molar ratio = 3/1, pH = 7, 25 °C) in 180 min. Thus, the results showed that the modified sewage sludge-derived carbonaceous catalyst had a better ability to activate PS for phenol degradation.

One-step preparation of ZVI-sludge derived biochar without external source of iron and its application on persulfate activation

Zero Valent Iron (ZVI) is an important and widely employed environmental remediation material in brownfield. However, the instability of fine size ZVI and the strong aggregation of nanoscale-ZVI limited its further application. To overcome these drawbacks, ZVI-Sludge Derived Biochar (SDBC) was prepared without external iron source through the one-step process of pyrolysis. The characterization results including SEM-EDX, XRD and XPS confirmed the successful loading of Fe⁰ on the surface of SDBC. The activation efficiency of persulfate (PS) in in-situ chemical oxidation system was studied. The environmental remediation properties of ZVI-SDBC/PS system were evaluated employing acid orange (AO7) and landfill leachate as target pollutants. ZVI-SDBC/PS system was highly efficient as that 99.0% of AO7 (0.06 mM) was removed by 0.925 mM of PS and 0.5 g L^-1 of ZVI-SDBC. In addition, total organic carbon (TOC) and ammonia in leachate were removed by 62.8% and 99.8%, respectively. The removal efficiency of AO7 was nearly independent on initial pH as that 89.1% and 99.1% of AO7 were removed at pH of 9.08 and 2.13 respectively. Hydroxyl radicals dominated in the reaction under neutral and alkaline conditions with contribution rates of 71.9% and 86.1% respectively. Noticeably, not only free radicals but also non-radical species such as singlet oxygen contributed to the degradation, which favored the pH-independent performance. The reuse performance of ZVI-SDBC was higher than these of previously reported ZVI-based catalysts as that the first-order rate constant of AO7 removal decreased not much from 0.0718 to 0.0502 min^-1 after the three-cycle reuse assays. In summary, ZVI-SDBC showed advantages such as the facile and chemical-saving preparation method, reliable disposal of municipal sewage sludge, remarkable efficiency and stability. These advantages proved ZVI-SDBC/PS system as an effective strategy of controlling waste by waste, and implicated its potential application in full-scale for environmental remediation in brownfield.

Preparation and application of magnetic biochar in water treatment: A critical review

In recent years, magnetic biochar has been widely used in removal of pollutants from water. In this paper, the preparation technologies of magnetic biochar are analyzed, and the performance and application of magnetic biochar in removal of inorganic pollutants such as heavy metals, and organic pollutants are investigated. Moreover, the adsorption behaviors, the key influencing factors and the adsorption mechanisms of magnetic biochars are summarized in this paper. Compared with common biochar, magnetic biochar is more effective in removal of water pollutants, including Cd(II), Pb(II), Zn(II), Cu(II), methylene blue, tetracycline, pesticide and phosphate. Langmuir and Freundlich models are adopted as the mainly adsorption isotherms, while pseudo-second-order model is employed as Kinetic model of heavy metal ions and organic contaminants in water. This study also investigates degradation of organic contaminants in water using magnetic biochar as catalyst. Results showed that encapsulated γ-Fe₂O₃ nanoparticles enhanced the catalytic ability of persulfate activator. Further researches on preparation and application of magnetic biochar in water treatment are prospected in this review.

Synergistic oxidation of Bisphenol A in a heterogeneous ultrasound-enhanced sludge biochar catalyst/persulfate process: Reactivity and mechanism

Recently, clean-up of resistant organic compounds has attracted growing attention. In this study, a novel heterogeneous ultrasound-enhanced sludge biochar catalyst/persulfate (BC/PS/US) process was firstly developed for the degradation of bisphenol A (BPA) in water. The results revealed that BC/PS/US process could successfully achieve a positively synergistic effect between sonochemistry and catalytic chemistry on the degradation of BPA compared to its corresponding comparative process. Nearly 98% of BPA could be degraded within 80 min at optimum reaction conditions. The coexisting substances including Cl^-, SO₄^2- and NO₃^- had no obvious inhibition on the BPA degradation, whereas HCO₃^- and humic acid (HA) had significant inhibition effects on that. PS decomposition of BC/PS/US process was superior to that of BC/PS or US/PS process. Both SO₄^- and HO participated in the degradation of BPA, but SO₄^- was predominant radical in the BC/PS/US process. A possible pathway of BPA degradation was proposed, and the BPA molecule was attacked by SO₄^- and degraded into five kinds of intermediate products through hydroxylation and demethylation processes. This study helps to comprehend the application of sludge biochar catalyst as a persulfate activator for the degradation of organic compounds under ultrasound irradiation, and provides a new strategy in wastewater treatment.

Magnetic biochar for environmental remediation: A review

The difficulty of separating the powdered biochar from the environmental medium may lead to secondary pollution and hinder the large-scale application of biochar as an adsorbent. An effective strategy to solve this bottleneck is to introduce transition metals and their oxides into the biochar matrix, creating easily separable magnetic biochar. Magnetic biochar is also effective for the removal of pollutants from aqueous solution. This review comprises a systematic analysis of 109 papers published in recent years (From 2011 to June 2019), and summarises the synthetic methods and raw materials required for magnetic biochar preparation. The basic physicochemical properties of magnetic biochar are expounded, together with findings from relevant studies, and the application of magnetic biochar as an adsorbent or catalyst in environmental remediation are summarised. Other applications of magnetic biochar are also discussed. Finally, some constructive suggestions are given for the future direction of magnetic biochar research.

Electrochemical/Fe3+/peroxymonosulfate system for the degradation of Acid Orange 7 adsorbed on activated carbon fiber cathode

Acid Orange 7 (AO7), as a most common and widely used synthetic dyes in the printing and dyeing industry, was hardly degradable by traditional wastewater treatment methods. Here, activated carbon fiber (ACF) as an in-situ regenerated cathodic adsorbent in the electrochemical/Fe³⁺/peroxymonosulfate process (EC/ACF/Fe³⁺/PMS) was firstly investigated for AO7 removal and compared with several different processes. The results indicated that the effective adsorption of AO7 on ACF can be enhanced under electrolytic conditions, while the adsorbed AO7 on ACF can be completely degraded and mineralized in EC/ACF/Fe³⁺/PMS process resulting in the in-situ regeneration of ACF. Besides, the electrical energy per order values were investigated, which showed an apparent reduction of electrical energy consumption from 0.42831 to 0.09779 kWh m^-3 when ACF-cathode replaced Pt-cathode. Further study revealed that higher conversion rate of Fe²⁺ from Fe³⁺ was observed with ACF-cathode. It deserved to be mentioned that the removal efficiency of AO7 was satisfactory and stable even after reusing ACF cathode for 10 times. Furthermore, structure and elements of ACF surface were investigated, which indicated the structure of ACF was intact in EC/ACF/Fe³⁺/PMS due to inhibition of ACF corrosion by electron migration at cathode. In addition, the total iron content of the effluent in EC/ACF/Fe³⁺/PMS was lower than that of EC/Fe³⁺/PMS due to the deposition of iron on ACF-cathode surface. Therefore, advantages of EC/ACF/Fe³⁺/PMS for AO7 degradation were not only a much higher oxidation efficiency and in-situ regenerated cathodic adsorbent, but also a lower electrical energy consumption and lesser iron ions contents in the effluent.

Biochar produced from the co-pyrolysis of sewage sludge and walnut shell for ammonium and phosphate adsorption from water

Pyrolysis of sewage sludge to obtain biochar is an environmentally friendly method of sewage sludge utilization. In this study, sewage sludge and walnut shell were co-pyrolyzed to produce biochar, which was utilized in the adsorption of ammonium and phosphate from water. Brunauer-Emmett-Teller analysis, X-ray diffraction spectroscopy, scanning electron microscopy, and Fourier transform infrared techniques were applied to analyze the physical and chemical properties of the biochar. The sewage sludge-based biochar consisted of rich metal oxides and functional groups, and the addition of walnut shell was beneficial for the development of porous structure. When the mixing ratio of sewage sludge and walnut shell was 3:1, the derived biochar (MBC3-1) showed a high adsorption capacity for NH₄⁺ in neutral or weak alkaline water. Pure sewage sludge biochar (SBC) was the best option for the adsorption of PO₄^3- in a wide pH range of water. The adsorption of NH₄⁺ and v on MBC3-1 and SBC were controlled by intraparticle diffusion and pseudo-second-order kinetic models, respectively. Isothermal studies indicated that multiple adsorption processes occurred in the adsorption of NH₄⁺ and PO₄^3-, and the maximum adsorption capacity of NH₄⁺ and PO₄^3- reached 22.85 mg/g and 303.49 mg/g on MBC3-1 and SBC, respectively. Thermodynamic analysis confirmed the exothermic and endothermic nature for NH₄⁺ and PO₄^3- adsorption on biochar, respectively.

Precise control of iron activating persulfate by current generation in an electrochemical membrane reactor

Activated persulfate (PS) oxidation is promising for contaminant removal but a lack of controllable activation can lead to a loss of reagents and thus low contamination degradation. Herein, we have proposed and investigated an innovative method to control PS activation by introducing ion exchange membrane into electrochemically activated PS. This electrochemical membrane reactor (EMR) could precisely control PS activation by adjusting electrical current for slow release of Fe²⁺, and also avoid direct contact between PS and a sacrificial anode electrode (iron electrode)/an alkaline cathode solution. It was found that the PS decomposition rate constant was linearly increased by increasing the applied current (R² = 0.988). The rate of the released Fe²⁺ also exhibited a linear relationship with the applied current (R² = 0.995). Compared to one-time dosage of Fe²⁺, the EMR-based slow-release process had higher contamination degradation and better PS utilization (molar ratio of the decomposed PS to the migrated Fe, 1.04 ± 0.01:1), thereby minimizing the waste of both reaction reagents and generated radicals. The EMR was also employed to degrade a representative dye contaminant in a controllable manner and achieved 95.7 ± 0.7% removal percentage with PS dosage of 3.0 g L^-1 within 20 min. This study is among the earliest to explore effective approaches for precisely controlling PS activation and subsequent oxidation of contaminants.

An often-overestimated adverse effect of halides in heat/persulfate-based degradation of wastewater contaminants

Halides (X^-) in the industrial wastewater are usually thought to adversely affect the degradation kinetics and mineralization rates in several SO₄^--based advanced oxidation processes. However, their unfavorable effects might be overestimated, particularly the heat/persulfate (PS) system as tested in the present study. Here the degradation of phenol, benzoic acid, coumarin and acid orange 7 (AO7) was examined with the presence of chloride or bromide in a heat/PS process. Cl^- was found to have a dual effect (inhibition followed by enhancement) on the decomposition rates of organic pollutants, whereas the effects of Br^- are insignificant within the tested concentration (0-0.2 mM). However, some chlorinated or brominated compounds were still identified in this heat/PS system. Unexpectedly, the mineralization rates of AO7, phenol, benzoic acid and coumarin were not apparently inhibited. In addition, the formation of adsorbable organic halogen (AOX) in the heat/PS system was much less than those in the peroxymonosulfate (PMS)/Cl^- or PMS/Br^- systems. According to the results of kinetic modeling, SO₄^- was the dominating radical for AO7 degradation without Cl^- or Br^-, but Cl₂^- was the main oxidant in the presence of Cl^-, SO₄^-, Br and Br₂- were responsible for the oxidation of AO7 in the presence of Br^-. The present study assumes that X₂/HOX, rather than halogen radicals, is responsible for the enhanced formation of organohalogens. These findings are meaningful to evaluate the PS-based technologies for the high-salinity wastewater and to develop useful strategies for mitigating the negative effects of halides in advanced oxidation processes (AOPs).