Specific detection of gut pathogens for one-pot chip based on RPA-CRISPR/Cas12a

BACKGROUND

There are billions of bacteria in the intestine, most of which are harmless and play important roles in humans. Although only a very small number of bacteria can cause diseases, once the pathogenic bacteria are ingested into the body and multiply in large quantities, it can lead to inflammatory diseases in the intestines and even other organs. Although polymerase chain reaction can specifically detect bacterial nucleic acid. However, the demand for temperature cycling limits its portability. Therefore, it is hoped to establish a high-throughput, highly specific and portable detection platform for directly detecting nucleic acid of intestinal pathogens.

RESULTS

Herein, a one-pot chip based on RPA-CRCISPR/Cas12a platform was developed. The chip is the same size as a glass slide and allows detection at the same temperature. Multiple samples could be detected simultaneously on the one chip, achieved high-throughput detection and improved the integration of detection. The specific recognition of CRISPR/Cas12a avoided the influence of non-specific amplification of RPA and enhanced the specificity of the analysis. At the same time, the one-pot chip avoided secondary contamination when the lid was opened during the analysis process. And the bacterial concentration showed good linearity at 102-108 cfu mL-1. The limit of detection could be as low as 0.43 cfu mL-1. This method has been successfully used to detect pollution samples. It can provide a reliable platform for early screening of gastrointestinal and other inflammatory diseases.

SIGNIFICANCE

The one-pot chip based on the RPA-CRISPR/Cas12a platform established can directly detect the nucleic acid of intestinal pathogens, with portability and specificity. It is worth noting that the platform has good programmability, can be used for other target detection by changing crRNA and RPA primers, it can achieve multi sample detection on the one chip.

On-site detection of methicillin-resistant Staphylococcus aureus (MRSA) utilizing G-quadruplex based isothermal exponential amplification reaction (GQ-EXPAR)

Methicillin-resistant Staphylococcus aureus (MRSA) has a high incidence in infectious hospitals and communities, highlighting the need for early on-site detection due to its resistance to methicillin antibiotics. The present study introduces a highly sensitive detection system for mecA, a crucial methicillin marker, utilizing an RCA-based isothermal exponential amplification reaction. The G-quadruplex-based isothermal exponential amplification reaction (GQ-EXPAR) method designs probes to establish G-quadruplex secondary structures incorporating thioflavin T for fluorescence. The system, unlike conventional genetic detection methods, works with portable isothermal PCR devices (isoQuark), facilitating on-site detection. A detection limit of 0.1 fmol was demonstrated using synthetic DNA, and effective detection was proven using thermal lysis. The study also validated the detection of targets swabbed from surfaces within bacterial 3D nanostructures using the GQ-EXPAR method. After applying complementary sequences to the padlock probe for the target, the GQ-EXPAR method can be used on various targets. The developed method could facilitate rapid and accurate diagnostics within MRSA strains.

Development of real-time recombinase polymerase amplification (RPA) and RPA combined with lateral flow dipstick (LFD) assays for the rapid and sensitive detection of cyprinid herpesvirus 3

In this issue, we established rapid, cost-effective, and simple detection methods including recombines polymerase amplification with lateral flow dipstick (RPA-LFD) and real-time RPA for cyprinid herpesvirus 3(CyHV-3), and evaluated their sensitivity, specificity, and applicability, the real-time RPA method could achieve sensitive diagnosis of CyHV-3 within 1.3 copies per reaction, respectively. The real-time RPA method is 10-fold more sensitive than RPA-LFD method. The exact number of CyHV-3 can be calculated in each sample by real-time RPA. The sera from koi also can be tested in these methods. In addition, no cross-reaction was observed with other related pathogens, including carp oedema virus (CEV), spring viraemia of carp virus (SVCV), cyprinid herpesvirus 1(CyHV-1), cyprinid herpesvirus 2(CyHV-2), type I grass carp reovirus (GCRV-I), type II GCRV (GCRV-II), type III GCRV (GCRV-III), and Aeromonas hydrophila.

Ratiometric Readout of Bacterial Infections via a Lyophilized CRISPR-Cas12a Sensor with Color-Changeable Bioluminescence

The healthcare burden imposed by bacterial infections demands robust and accessible diagnostic methods that can be performed outside hospitals and centralized laboratories. Here, we report Pathogen Assay with Ratiometric Luminescence (PEARL), a sensitive and easy-to-operate platform for detecting pathogenic bacteria. The PEARL leveraged a color-changeable CRISPR-Cas12a sensor and recombinase polymerase amplification to elicit ratiometric bioluminescence responses to target inputs. This platform enabled robust and visualized identification of attomolar bacteria genome deoxyribonucleic acid according to the color changes of the reactions. In addition, the components of the color-changeable Cas12a sensor could be lyophilized for 3 month storage at ambient temperature and then be fully activated with the amplicons derived from crude bacterial lysates, reducing the requirements for cold-chain storage and tedious handling steps. We demonstrated that the PEARL assay is applicable for identifying the infections caused by Pseudomonas aeruginosa in different clinical specimens, including sputa, urines, and swabs derived from wounds. These results revealed the potential of PEARL to be used by untrained personnel, which will facilitate decentralized pathogen diagnosis in community- and resource-limited regions.

CRISPR-Cas12a-based ultrasensitive assay for visual detection of SARS-CoV-2 RNA

The development of ultrasensitive and visual methods is of great significance for molecular diagnosis at the point-of-care. In this study, we have integrated recombinase polymerase amplification (RPA) with the CRISPR-Cas12a system to design an ultrasensitive strategy for visual nucleic acid testing. RPA is utilized to amplify the target nucleic acid, producing amplicons that activate the single-stranded DNase property of CRISPR-Cas12a. The activated CRISPR-Cas12a then degrades the single-stranded DNA on magnetic nanoparticles (MNPs), releasing immobilized GOx from the MNPs which catalyses the chromogenic substrate. The developed method exhibits remarkable sensitivity, successfully detecting as low as 10 aM (∼6 copies per μL) of the target nucleic acid by visual colour changes in solution. The instrumental limit of detection is calculated to be 2.86 aM (∼2 copies per μL), comparable to the sensitivity of polymerase chain reaction (PCR). Importantly, this approach only requires isothermal incubation operation and does not involve costly instruments. The method has been validated by visually detecting the SARS-CoV-2 RNA gene fragment within 50 minutes. With its ultrasensitivity, simplicity of operation, and potential for integration into a point-of-care detection kit, this strategy holds great promise for nucleic acid testing in various settings.

A Loop-Mediated Isothermal Amplification Assay for the Rapid Detection of Didymella segeticola Causing Tea Leaf Spot

Tea leaf spot caused by Didymella segeticola is an important disease that threatens the healthy growth of tea plants (Camellia sinensis) and results in reductions in the productivity and quality of tea leaves. Early diagnosis of the disease is particularly important for managing the infection. Loop-mediated isothermal amplification (LAMP) assay is an efficient diagnostic technique with the advantages of simplicity, specificity, and sensitivity. In this study, we developed a rapid, visual, and high-sensitivity LAMP assay for D. segeticola detection based on sequence-characterized amplified regions. Two pairs of amplification primers (external primers F3 and B3 and internal primers FIP and BIP) were designed based on a specific sequence in D. segeticola (NCBI accession number: OR987684). Compared to common pathogens of other genera in tea plants and other species in the Didymella genus (Didymella coffeae-arabicae, Didymella pomorum, and Didymella sinensis), the LAMP method is specific for detecting the species D. segeticola. The assay was able to detect D. segeticola at a minimal concentration of 1 fg/μL genomic DNA at an optimal reaction temperature of 65 °C for 60 min. When healthy leaves were inoculated with D. segeticola in the laboratory, the LAMP method successfully detected D. segeticola in diseased tea leaves at 72 h post inoculation. The LAMP assays were negative when the DNA samples were extracted from healthy leaves. Leaf tissues with necrotic lesions from 18 germplasms of tea plants tested positive for the pathogen by the LAMP assay. In summary, this study established a specific, sensitive, and simple LAMP method to detect D. segeticola, which provides reliable technical support for estimating disease prevalence and facilitates sustainable management of tea leaf spot.

RPA-CRISPR/Cas12a-LFA combined with a digital visualization instrument to detect Toxoplasma gondii in stray dogs and cats in Zhejiang province, China

Toxoplasma gondii, which causes toxoplasmosis, is prevalent in warm-blooded animals, such as cats, dogs, and humans. T. gondii causes economic losses to livestock production and represents a potential risk to public health. Dogs and cats are common hosts in the epidemiology of toxoplasmosis. The current molecular diagnostic tools for T. gondii infection require high technical skills, a laboratory environment, and complex instruments. Herein, we developed a recombinase polymerase amplification (RPA)-clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 12a (Cas12a) assay to detect T. gondii. The lowest limit of detection of the assay was 31 copies/μL for the T. gondii B1 gene. In addition, we established a visual RPA-CRISPR/Cas12a lateral flow band assay (RPA-CRISPR/Cas12a-LFA) combined with a digital visualization instrument, which minimized the problem of false-negative results for weakly positive samples and avoided misinterpretation of the results by the naked eye, making the LFA assay results more accurate. The assay established in this study could identify T. gondii within 55 min with high accuracy and sensitivity, without cross-reaction with other tested parasites. The developed assay was validated by establishing a mouse model of toxoplasmosis. Finally, the developed assay was used to investigate the prevalence of T. gondii in stray cats and dogs in Zhejiang province, Eastern China. The positive rates of T. gondii infection in stray cats and dogs were 8.0% and 4.0%, respectively. In conclusion, the RPA-CRISPR/Cas12a-LFA is rapid, sensitive, and accurate for the early diagnosis of T. gondii, showing promise for on-site surveillance.

IMPORTANCE

Toxoplasma gondii is a virulent pathogen that puts millions of infected people at risk of chronic disease reactivation. Hosts of T. gondii are distributed worldwide, and cats and dogs are common hosts of T. gondii. Therefore, rapid diagnosis of early T. gondii infection and investigation of its prevalence in stray dogs and cats are essential. Here, we established a visual recombinase polymerase amplification-clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 12a-assay combined with a lateral flow band assay and a digital visualization instrument. Detailed analyses found that the assay could be used for the early diagnosis of T. gondii without false-negative results. Moreover, we detected the prevalence of T. gondii in stray cats and dogs in Zhejiang province, China. Our developed assay provides technical support for the early diagnosis of T. gondii and could be applied in prevalence surveys of T. gondii in stray dogs and cats.

The Present and Future Landscapes of Molecular Diagnostics

Nucleic acid testing is the cornerstone of modern molecular diagnostics. This review describes the current status and future directions of molecular diagnostics, focusing on four major techniques: polymerase chain reaction (PCR), next-generation sequencing (NGS), isothermal amplification methods such as recombinase polymerase amplification (RPA) and loop-mediated isothermal amplification (LAMP), and clustered regularly interspaced short palindromic repeats (CRISPR)-based detection methods. We explore the advantages and limitations of each technique, describe how each overlaps with or complements other techniques, and examine current clinical offerings. This review provides a broad perspective into the landscape of molecular diagnostics and highlights potential future directions in this rapidly evolving field.

Achieving unprecedented stability in lyophilized recombinase polymerase amplification with thermostable pyruvate kinase from Thermotoga maritima

Recombinase polymerase amplification (RPA) is an isothermal DNA amplification reaction at around 41 °C using recombinase (Rec), single-stranded DNA-binding protein (SSB), strand-displacing DNA polymerase (Pol), and an ATP-regenerating enzyme. Considering the onsite use of RPA reagents, lyophilized RPA reagents with long storage stability are highly desired. In this study, as one of the approaches to solve this problem, we attempted to use a thermostable pyruvate kinase (PK). PK gene was isolated from a thermophilic bacterium Thermotoga maritima (Tma-PK). Tma-PK was expressed in Escherichia coli and purified from the cells. Tma-PK exhibited higher thermostability than human PK. The purified Tma-PK preparation was applied to RPA as an ATP-regenerating enzyme. Liquid RPA reagent with Tma-PK exhibited the same performance as that with human PK. Lyophilized RPA reagent with Tma-PK exhibited higher performance than that with human PK. Combined with our previous results of RPA reagents of thermostable Pol from a thermophilic bacterium, Aeribacillus pallidus, the results in this study suggest that thermostable enzymes are preferable to mesophilic ones as a component in lyophilized RPA reagents.

Rapid, portable, and sensitive detection of CaMV35S by RPA-CRISPR/Cas12a-G4 colorimetric assays with high accuracy deep learning object recognition and classification

Fast, sensitive, and portable detection of genetic modification contributes to agricultural security and food safety. Here, we developed RPA-CRISPR/Cas12a-G-quadruplex colorimetric assays that can combine with intelligent recognition by deep learning algorithms to achieve sensitive, rapid, and portable detection of the CaMV35S promoter. When the crRNA-Cas12a complex recognizes the RPA amplification product, Cas12 cleaves the G-quadruplex, causing the G4-Hemin complex to lose its peroxide mimetic enzyme function and be unable to catalyze the conversion of ABTS2- to ABTS, allowing CaMV35S concentration to be determined based on ABTS absorbance. By utilizing the RPA-CRISPR/Cas12a-G4 assay, we achieved a CaMV35S limit of detection down to 10 aM and a 0.01 % genetic modification sample in 45 min. Deep learning algorithms are designed for highly accurate classification of color results. Yolov5 objective finding and Resnet classification algorithms have been trained to identify trace (0.01 %) CaMV35S more accurately than naked eye colorimetry. We also coupled deep learning algorithms with a smartphone app to achieve portable and rapid photo identification. Overall, our findings enable low cost ($0.43), high accuracy, and intelligent detection of the CaMV35S promoter.

Rapid authentication of characteristic milk powders by recombinase polymerase amplification assays

The authentication of dairy species has great significance for food safety. This study focused on a more rapid method for identifying major dairy species, and specific recombinase polymerase amplification (RPA)-based assays for cattle, goat, sheep, camel and donkey were developed. Through the developed RPA-based assays, goats and sheep could be simultaneously identified and bovine families could be differentiated. The performances of the RPA assays were validated using 37 milk powder samples, of which 16.2% (6/37) were suspected of being adulterated and 24.3% (9/37) were potentially at risk of being wrongly identified as adulteration. The effectiveness of the developed assays for crude DNA detection was also validated by a rapid nucleic acid extraction kit, and results showed that the presence of large amounts of protein and fat did not affect the qualitative results. Therefore, these assays could combine with the rapid nucleic acids extraction methods for being used in field detection.

Innovations in dengue virus detection: An overview of conventional and electrochemical biosensor approaches

Globally, people are in great threat due to the highly spreading of viral infectious diseases. Every year like 100-300 million cases of infections are found, and among them, above 80% are not recognized and irrelevant. Dengue virus (DENV) is an arbovirus infection that currently infects people most frequently. DENV encompasses four viral serotypes, and they each express comparable sign. From a mild febrile sickness to a potentially fatal dengue hemorrhagic fever, dengue can induce a variety of symptoms. Presently, the globe is being challenged by the untimely identification of dengue infection. Therefore, this review summarizes advances in the detection of dengue from conventional methods (nucleic acid-based, polymerase chain reaction-based, and serological approaches) to novel biosensors. This work illustrates an extensive study of the current designs and fabrication approaches involved in the formation of electrochemical biosensors for untimely identifications of dengue. Additionally, in electrochemical sensing of DENV, we skimmed through significances of biorecognition molecules like lectins, nucleic acid, and antibodies. The introduction of emerging techniques such as the CRISPR/Cas' system and their integration with biosensing platforms has also been summarized. Furthermore, the review revealed the importance of electrochemical approach compared with traditional diagnostic methods.

A Dual-mode platform for the rapid detection of Escherichia coli O157:H7 based on CRISPR/Cas12a and RPA

Escherichia coli O157:H7 (E. coli O157:H7) is a foodborne pathogenic microorganism that is commonly found in the environment and poses a significant threat to human health, public safety, and economic stability worldwide. Thus, early detection is essential for E. coli O157:H7 control. In recent years, a series of E. coli O157:H7 detection methods have been developed, but the sensitivity and portability of the methods still need improvement. Therefore, in this study, a rapid and efficient testing platform based on the CRISPR/Cas12a cleavage reaction was constructed. Through the integration of recombinant polymerase amplification and lateral flow chromatography, we established a dual-interpretation-mode detection platform based on CRISPR/Cas12a-derived fluorescence and lateral flow chromatography for the detection of E. coli O157:H7. For the fluorescence detection method, the limits of detection (LODs) of genomic DNA and E. coli O157:H7 were 1.8 fg/µL and 2.4 CFU/mL, respectively, within 40 min. Conversely, for the lateral flow detection method, LODs of 1.8 fg/µL and 2.4 × 102 CFU/mL were achieved for genomic DNA and E. coli O157:H7, respectively, within 45 min. This detection strategy offered higher sensitivity and lower equipment requirements than industry standards. In conclusion, the established platform showed excellent specificity and strong universality. Modifying the target gene and its primers can broaden the platform's applicability to detect various other foodborne pathogens.

Development and evaluation of a CRISPR-Cas13a system-based diagnostic for hepatitis E virus

OBJECTIVES

Hepatitis E virus (HEV) is the leading cause of acute viral hepatitis worldwide. HEV RNA detection is the gold standard for HEV infection diagnosis and PCR methods are commonly used but are usually time-consuming and expensive, resulting in low detection efficiency and coverage, especially in low-income areas. Here, we developed a simpler and more accessible HEV RNA detection method based on CRISPR-Cas13a system.

METHODS

A total of 265 samples of different types and sources, including 89 positive samples and 176 negative samples, were enrolled for evaluations. The sensitivity and specificity of the Cas13a-crRNA detection system were evaluated. The World Health Organization reference panel for HEV genotypes was used to evaluate the capability for detecting different HEV genotypes. The validity of the assay was compared with RT-qPCR.

RESULTS

The 95 % limits of detection (LOD) of Cas13a-crRNA-based fluorescence assay and strip assay were 12.5 and 200 IU/mL, respectively. They did not show cross-reactivity with samples positive for hepatitis A virus, hepatitis B virus, hepatitis C virus, coxsackievirus A16, rotavirus, enterovirus 71, norovirus or enteropathic Escherichia coli. Different HEV genotypes (HEV1-4) can be detected by the assay. Compared to RT-qPCR, the positive predictive agreements of Cas13a-crRNA-based fluorescence and strip assay were 98.9 % (95 % CI: 93.9-99.8 %) and 91.0 % (95 % CI: 83.3-95.4 %), respectively. The negative predictive agreements were both 100 % (95 % CI: 97.8-100 %).

CONCLUSIONS

In conclusion, we established a rapid and convenient HEV RNA detection method with good sensitivity and specificity based on CRISPR-Cas13a system, providing a new option for HEV infection diagnosis.

Comparative Evaluation of PCR-Based, LAMP and RPA-CRISPR/Cas12a Assays for the Rapid Detection of Diaporthe aspalathi

Southern stem canker (SSC) of soybean, attributable to the fungal pathogen Diaporthe aspalathi, results in considerable losses of soybean in the field and has damaged production in several of the main soybean-producing countries worldwide. Early and precise identification of the causal pathogen is imperative for effective disease management. In this study, we performed an RPA-CRISPR/Cas12a, as well as LAMP, PCR and real-time PCR assays to verify and compare their sensitivity, specificity and simplicity and the practicality of the reactions. We screened crRNAs targeting a specific single-copy gene, and optimized the reagent concentrations, incubation temperatures and times for the conventional PCR, real-time PCR, LAMP, RPA and Cas12a cleavage stages for the detection of D. aspalathi. In comparison with the PCR-based assays, two thermostatic detection technologies, LAMP and RPA-CRISPR/Cas12a, led to higher specificity and sensitivity. The sensitivity of the LAMP assay could reach 0.01 ng μL-1 genomic DNA, and was 10 times more sensitive than real-time PCR (0.1 ng μL-1) and 100 times more sensitive than conventional PCR assay (1.0 ng μL-1); the reaction was completed within 1 h. The sensitivity of the RPA-CRISPR/Cas12a assay reached 0.1 ng μL-1 genomic DNA, and was 10 times more sensitive than conventional PCR (1.0 ng μL-1), with a 30 min reaction time. Furthermore, the feasibility of the two thermostatic methods was validated using infected soybean leaf and seeding samples. The rapid, visual one-pot detection assay developed could be operated by non-expert personnel without specialized equipment. This study provides a valuable diagnostic platform for the on-site detection of SSC or for use in resource-limited areas.

Recent Advances in and Application of Fluorescent Microspheres for Multiple Nucleic Acid Detection

Traditional single nucleic acid assays can only detect one target while multiple nucleic acid assays can detect multiple targets simultaneously, providing comprehensive and accurate information. Fluorescent microspheres in multiplexed nucleic acid detection offer high sensitivity, specificity, multiplexing, flexibility, and scalability advantages, enabling precise, real-time results and supporting clinical diagnosis and research. However, multiplexed assays face challenges like complexity, costs, and sample handling issues. The review explores the recent advancements and applications of fluorescent microspheres in multiple nucleic acid detection. It discusses the versatility of fluorescent microspheres in various fields, such as disease diagnosis, drug screening, and personalized medicine. The review highlights the possibility of adjusting the performance of fluorescent microspheres by modifying concentrations and carrier forms, allowing for tailored applications. It emphasizes the potential of fluorescent microsphere technology in revolutionizing nucleic acid detection and advancing health, disease treatment, and medical research.

Optical lateral flow assays in early diagnosis of SARS-CoV-2 infection

So far, the 2019 novel coronavirus (COVID-19) is spreading widely worldwide. The early diagnosis of infection by the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is essential to provide timely treatment and prevent its further spread. Lateral flow assays (LFAs) have the advantages of rapid detection, simple operation, low cost, ease of mass production, and no need for special devices and professional operators, which make them suitable for self-testing at home. This review focuses on the early diagnosis of SARS-CoV-2 infection based on optical LFAs including colorimetric, fluorescent (FL), chemiluminescent (CL), and surface-enhanced Raman scattering (SERS) LFAs for the detection of SARS-CoV-2 antigens and nucleic acids. The types of recognition components, detection modes used for antigen detection, labels employed in different optical LFAs, and strategies to improve the detection sensitivity of LFAs were reviewed. Meanwhile, LFAs coupled with different nucleic acid amplification techniques and CRISPR-Cas systems for the detection of SARS-CoV-2 nucleic acids were summarized. We hope this review provides research mentalities for developing highly sensitive LFAs that can be used in home self-testing for the early diagnosis of SARS-CoV-2 infection.

C. difficile biomarkers, pathogenicity and detection

BACKGROUND

Clostridioides difficile infection (CDI) is the main etiologic agent of antibiotic-associated diarrhea. CDI contributes to gut inflammation and can lead to disruption of the intestinal epithelial barrier. Recently, the rate of CDI cases has been increased. Thus, early diagnosis of C. difficile is critical for controlling the infection and guiding efficacious therapy.

APPROACH

A search strategy was set up using the terms C. difficile biomarkers and diagnosis. The found references were classified into two general categories; conventional and advanced methods.

RESULTS

The pathogenicity and biomarkers of C. difficile, and the collection manners for CDI-suspected specimens were briefly explained. Then, the conventional CDI diagnostic methods were subtly compared in terms of duration, level of difficulty, sensitivity, advantages, and disadvantages. Thereafter, an extensive review of the various newly proposed techniques available for CDI detection was conducted including nucleic acid isothermal amplification-based methods, biosensors, and gene/single-molecule microarrays. Also, the detection mechanisms, pros and cons of these methods were highlighted and compared with each other. In addition, approximately complete information on FDA-approved platforms for CDI diagnosis was collected.

CONCLUSION

To overcome the deficiencies of conventional methods, the potential of advanced methods for C. difficile diagnosis, their direction, perspective, and challenges ahead were discussed.

The development of RT-RPA and CRISPR-Cas12a based assay for sensitive detection of infectious hematopoietic necrosis virus (IHNV)

Infectious hematopoietic necrosis virus (IHNV) is an economically important virus causing significant mortalities among wild and cultured salmonid fish worldwide. Rapid and sensitive diagnostic methods of IHNV are crucial for timely controlling infections. For better detection of IHNV, we have established a detection technology based on the reverse transcription and recombinase polymerase amplification (RT-RPA) and CRISPR/Cas12a to detect the N gene of IHNV in two steps. Following the screening of primer pairs, the reaction temperature and time for RPA were optimized to be 41 °C and 35 min, respectively, and the CRISPR/Cas12a reaction was performed at 37 °C for 15 min. The whole detection procedure including can be accomplished within one hour, with a detection sensitivity of about 9.5 copies/µL. The detection method exhibited high specificity with no cross-reaction to the other Novirhabdoviruses HIRRV and VHSV, allowing naked-eye interpretation of the results through lateral flow or fluorescence under ultraviolet light. Overall, our results demonstrated that the developed RT-RPA-Cas12a-mediated assay is a rapid, specific and sensitive detection method for routine and on-site detection of IHNV, which shows a great application promise for the prevention of IHNV infections.

A microfluidic card-based electrochemical assay for the detection of sulfonamide resistance genes

Most electroanalytical detection schemes for DNA markers require considerable time and effort from expert personnel to thoroughly follow the analysis and obtain reliable outcomes. This work aims to present an electrochemical assay performed inside a small card-based platform powered by microfluidic manipulation, requiring minimal human intervention and consumables. The assay couples a sample/signal dual amplification and DNA-modified magnetic particles for the detection of DNA amplification products. Particularly, the sul1 and sul4 genes involved in the resistance against sulfonamide antibiotics were analyzed. As recognized by the World Health Organization, antimicrobial resistance threatens global public health by hampering medication efficacy against infections. Consequently, analytical methods for the determination of such genes in environmental and clinical matrices are imperative. Herein, the resistance genes were extracted from E. coli cells and amplified using an enzyme-assisted isothermal amplification at 37 °C. The amplification products were analyzed in an easily-produced, low-cost, card-based set-up implementing a microfluidic system, demanding limited manual work and small sample volumes. The target amplicon was thus captured and isolated using versatile DNA-modified magnetic beads injected into the microchannel and exposed to the various reagents in a continuously controlled microfluidic flow. After the optimization of the efficiency of each phase of the assay, the platform achieved limits of detections of 44.2 pmol L-1 for sul1 and 48.5 pmol L-1 for sul4, and was able to detect down to ≥500-fold diluted amplification products of sul1 extracted from E. coli living cells in around 1 h, thus enabling numerous end-point analyses with a single amplification reaction.

The Development of a Multienzyme Isothermal Rapid Amplification Assay to Visually Detect Duck Hepatitis B Virus

Duck hepatitis B virus (DHBV) is widely prevalent in global ducks and has been identified in Chinese geese with a high prevalence; the available detection techniques are time-consuming and require sophisticated equipment. In this study, an assay combining multienzyme isothermal rapid amplification (MIRA) and lateral flow dipstick (LFD) was developed for the efficient and rapid detection of DHBV. The primary reaction condition of the MIRA assay for DHBV detection was 10 min at 38 °C without a temperature cycler. Combined with the LFD assay, the complete procedure of the newly developed MIRA assay for DHBV detection required only 15 min, which is about one-fourth of the reaction time for routine polymerase chain reaction assay. And electrophoresis and gel imaging equipment were not required for detection and to read the results. Furthermore, the detection limit of MIRA was 45.6 copies per reaction, which is approximately 10 times lower than that of a routine polymerase chain reaction assay. The primer set and probe had much simpler designs than loop-mediated isothermal amplification, and they were only specific to DHBV, with no cross-reactivity with duck hepatitis A virus subtype 1 and duck hepatitis A virus subtype 3, goose parvovirus, duck enteritis virus, duck circovirus, or Riemerella anatipestifer. In this study, we offer a simple, fast, and accurate assay method to identify DHBV in clinical serum samples of ducks and geese, which would be suitable for widespread application in field clinics.

A Lateral Flow-Recombinase Polymerase Amplification Method for Colletotrichum gloeosporioides Detection

The greater yam (Dioscorea alata), a widely cultivated and nutritious food crop, suffers from widespread yield reduction due to anthracnose caused by Colletotrichum gloeosporioides. Latent infection often occurs before anthracnose phenotypes can be detected, making early prevention difficult and causing significant harm to agricultural production. Through comparative genomic analysis of 60 genomes of 38 species from the Colletotrichum genus, this study identified 17 orthologous gene groups (orthogroups) that were shared by all investigated C. gloeosporioides strains but absent from all other Colletotrichum species. Four of the 17 C. gloeosporioides-specific orthogroups were used as molecular markers for PCR primer designation and C. gloeosporioides detection. All of them can specifically detect C. gloeosporioides out of microbes within and beyond the Colletotrichum genus with different sensitivities. To establish a rapid, portable, and operable anthracnose diagnostic method suitable for field use, specific recombinase polymerase amplification (RPA) primer probe combinations were designed, and a lateral flow (LF)-RPA detection kit for C. gloeosporioides was developed, with the sensitivity reaching the picogram (pg) level. In conclusion, this study identified C. gloeosporioides-specific molecular markers and developed an efficient method for C. gloeosporioides detection, which can be applied to the prevention and control of yam anthracnose as well as anthracnose caused by C. gloeosporioides in other crops. The strategy adopted by this study also serves as a reference for the identification of molecular markers and diagnosis of other plant pathogens.

Universal and Naked-Eye Diagnostic Platform for Emetic Bacillus cereus Based on RPA-Assisted CRISPR/Cas12a

Emetic Bacillus cereus (B. cereus), which can cause emetic food poisoning and in some cases even fulminant liver failure and death, has aroused widespread concern. Herein, a universal and naked-eye diagnostic platform for emetic B. cereus based on recombinase polymerase amplification (RPA)-assisted CRISPR/Cas12a was developed by targeting the cereulide synthetase biosynthetic gene (cesB). The diagnostic platform enabled one-pot detection by adding components at the bottom and cap of the tube separately. The visual limit of detection of RPA-CRISPR/Cas12a for gDNA and cells of emetic B. cereus was 10-2 ng μL-1 and 102 CFU mL-1, respectively. Meanwhile, it maintained the same sensitivity in the rice, milk, and cooked meat samples even if the gDNA was extracted by simple boiling. The whole detection process can be finished within 40 min, and the single cell of emetic B. cereus was able to be recognized through enrichment for 2-5 h. The good specificity, high sensitivity, rapidity, and simplicity of the RPA-assisted CRISPR/Cas12a diagnostic platform made it serve as a potential tool for the on-site detection of emetic B. cereus in food matrices. In addition, the RPA-assisted CRISPR/Cas12a assay is the first application in emetic B. cereus detection.

Recombinase polymerase amplification combined with lateral flow dipstick assay for rapid visual detection of A.simplex (s. s.) and A.pegreffii in sea foods

Anisakiasis is a food-borne parasitic disease mainly caused by the third stage of Anisakis simplex (s. s.) and Anisakis pegreffii. Traditional methods for detecting of Anisakis involve morphology identification such as visual inspection, enzyme digestion, and molecular methods based on PCR, but they have certain limitations. In this study, the internal transcribed spacer 1 (ITS 1) regions of Anisakis were targeted to develop a visual screening method for detecting A. simplex (s. s.) and A. pegreffii in fish meat based on recombinase polymerase amplification (RPA) combined with lateral flow dipstick (LFD). Specific primers and probes were designed and optimized for temperature, reaction time, and detection threshold. LFD produced clear visual results that were easily identifiable after a consistent incubation of 10-20 min at 37 °C. The whole process of DNA amplification by RPA and readout by LFD did not exceed 30 min. In addition, the detection limit is up to 9.5 × 10-4 ng/μL, and the detection of the artificially contaminated samples showed that the developed assay can effectively and specifically detect A. simplex (s. s.) and A. pegreffii, which fully meet the market's requirements for fish food safety supervision.

Integrating Recombinase Polymerase Amplification and Photosensitization Colorimetric Detection in One Tube for Fast Screening of C. sakazakii in Formula Milk Powder

Cronobacter sakazakii (C. sakazakii) is a widely existing opportunistic pathogen and thus threatens people with low immunity, especially infants. To prevent the outbreak, a rapid and accurate on-site testing method is required. The current standard culture-based method is time-consuming (3-4 days), while the nucleic acid amplification (PCR)-based detection is mostly carried out in central laboratories. Herein, isothermal recombinase polymerase amplification (RPA) coupled with a photosensitization colorimetric assay (PCA) was adopted for the on-site detection of C. sakazakii in powdered infant formulas (PIFs). The lowest visual detection concentration of C. sakazakii is 800 cfu/mL and 2 cfu/g after 8 h bacteria pre-enrichment. Furthermore, to avoid typical cap opening-resulted aerosol pollution, the PCA reagents were lyophilized onto the cap of the RPA tube (containing lyophilized RPA reagents). After amplification, the tube was subjected to simple shaking to mix the PCA reagents with the amplification products for light-driven color development. Such a one-tube assay offered a lowest concentration of 1000 copies of genomic DNA of C. sakazakii within 1 h. After 8 h of bacterial enrichment, the lowest detecting concentration could be pushed down to 5 cfu/g bacteria in PIF. To facilitate on-site monitoring, a portable, battery-powered PCA device was designed to mount the typical RPA 8-tube strip, and a color analysis cellphone APP was further employed for facile readout.

Efficient detection of Streptococcus pyogenes based on recombinase polymerase amplification and lateral flow strip

PURPOSE

This article aims to establish a rapid visual method for the detection of Streptococcus pyogenes (GAS) based on recombinase polymerase amplification (RPA) and lateral flow strip (LFS).

METHODS

Utilizing speB of GAS as a template, RPA primers were designed, and basic RPA reactions were performed. To reduce the formation of primer dimers, base mismatch was introduced into primers. The probe was designed according to the forward primer, and the RPA-LFS system was established. According to the color results of the reaction system, the optimum reaction temperature and time were determined. Thirteen common clinical standard strains and 14 clinical samples of GAS were used to detect the selectivity of this method. The detection limit of this method was detected by using tenfold gradient dilution of GAS genome as template. One hundred fifty-six clinical samples were collected and compared with qPCR method and culture method. Kappa index and clinical application evaluation of the RPA-LFS were carried out.

RESULTS

The enhanced RPA-LFS method demonstrates the ability to complete the amplification process within 6 min at 33 °C. This method exhibits a high analytic sensitivity, with the lowest detection limit of 0.908 ng, and does not exhibit cross-reaction with other pathogenic bacteria.

CONCLUSIONS

The utilization of RPA and LFS allows for efficient and rapid testing of GAS, thereby serving as a valuable method for point-of-care testing.

Development and Application of a Duplex RT-RPA Assay for the Simultaneous Detection of Cymbidium mosaic virus and Odontoglossum ringspot virus

Cymbidium mosaic virus (CymMV) and Odontoglossum ringspot virus (ORSV) are among the world's most serious and widespread orchid viruses; they often infect orchids, causing devastating losses to the orchid industry. Therefore, it is critical to establish a method that can rapidly and accurately detect viruses in the field using simple instruments, which will largely reduce the further spread of viruses and improve the quality of the orchid industry and is suitable for mass promotion and application at grassroots agrotechnical service points. In this investigation, we established a rapid amplification method for virus detection at 39 °C for 35 min to detect the presence of CymMV and ORSV simultaneously, sensitively, and specifically in orchids. Primers for the capsid protein (CP)-encoding genes of both viruses were designed and screened, and the reaction conditions were optimized. The experimental amplification process was completed in just 35 min at 39 °C. There were no instances of nonspecific amplification observed when nine other viruses were present. The RPA approach had detection limits of 104 and 103 copies for pMD19T-CymMV and pMD19T-ORSV, respectively. Moreover, the duplex RT-RPA investigation confirmed sensitivity and accuracy via a comparison of detection results from 20 field samples with those of a gene chip. This study presents a precise and reliable detection method for CymMV and ORSV using RT-RPA. The results demonstrate the potential of this method for rapid virus detection. It is evident that this method could have practical applications in virus detection processes.

Efficient magnetic enrichment cascade single-step RPA-CRISPR/Cas12a assay for rapid and ultrasensitive detection of Staphylococcus aureus in food samples

Staphylococcus aureus (S. aureus) is a prevalent foodborne pathogen that could cause severe food poisoning. Thus, rapid, efficient, and ultrasensitive detection of S. aureus in food samples is urgently needed. Here, we report an efficient magnetic enrichment cascade single-step recombinase polymerase amplification (RPA)-CRISPR/Cas12a assay for the ultrasensitive detection of S. aureus. Magnetic beads (MBs) functionalized with S. aureus-specific antibodies were initially used for S. aureus enrichment from the complex matrix, with 98% capture efficiency in 5 min and 100-fold sensitivity improvement compared with unenriched S. aureus. Next, a single-step RPA-CRISPR/Cas12a-based diagnostic system with optimized extraction-free bacteria lysis was constructed. This assay could detect as low as 1 copy/μL (five copies/reaction) of extracted DNA template and 10 CFU/mL of S. aureus within 40 min. Furthermore, the assay could effectively detect S. aureus in real food samples such as lake water, orange juice, pork, and lettuce, with concordant results to qPCR assays. The proposed cascade signal-amplification assay eliminates the need for lengthy bacterial culture and complex sample preparation steps. Hence, the proposed assay shows great application potential for rapid, efficient, and ultrasensitive detection of pathogens in real food samples.

Establishment of an ultrasensitive and visual detection platform for Neospora caninum based-on the RPA-CRISPR/Cas12a system

Neospora caninum is a protozoan parasite that causes neosporosis in cattle, and leads to a high rate of abortion and severe financial losses. Rapid and accurate detection is particularly important for preventing and controlling neosporosis. In our research, a highly effective diagnostic technique based on the RPA-CRISPR/Cas system was created to successfully identify N. caninum against the Nc5 gene, fluorescent reporter system and the lateral flow strip (LFS) biosensor were exploited to display results. The specificity and sensitivity of the PRA-CRISPR/Cas12a assay were evaluated. We discovered that it was highly specific and did not react with any other pathogens. The limit of detection (LOD) for this technology was as low as one parasite per milliliter when employing the fluorescent reporter system, and was approximately ten parasites per milliliter based on the LFS biosensor and under blue or UV light. Meanwhile, the placental tissue samples were detected by our RPA-CRISPR/Cas12a detection platform were completely consistent with that of the nested PCR assay (59.4 %, 19/32). The canine feces were detected by our RPA-CRISPR/Cas12a detection platform were completely consistent with that of the nested PCR assay (8.6 %, 6/70). The RPA-CRISPR/Cas12a detection procedure was successfully finished in within 90 min and offers advantages of high sensitivity and specificity, speed and low cost. The technique was better suitable for extensive neosporosis screening in non-laboratory and resource-constrained locations. This study provided a new strategy for more rapid and portable identification of N. caninum.

Comparative analysis of structural dynamics and allosteric mechanisms of RecA/Rad51 family proteins: Integrated atomistic MD simulation and network-based analysis

Homologous recombination plays a key role in double-strand break repair, stalled replication fork repair, and meiosis. The RecA/Rad51 family recombinases catalyze the DNA strand invasion reaction that occurs during homologous recombination. However, the high sequence differences between homologous groups have hindered the thoroughly studies of this ancient protein family. The dynamic mechanisms of the family, particularly at the residual level, remain poorly understood. In this work, five representative RecA/Rad51 recombinase family members from all major kingdoms of living organisms: prokaryotes, eukaryotes, archaea, and viruses, were selected to explore the molecular mechanisms behind their conserved biological significance. A variety of techniques, including all-atom molecular dynamics simulation, perturbation response scanning, and protein structure network analysis, were used to examine the flexibility and correlation of protein domains, distribution of sensors and effectors and conserved hub residues. Furthermore, the potential communication routes between the ATP-binding region and the DNA-binding region of each recombinase were identified. Our results demonstrate the conserved molecular dynamics of these recombinases in the early stage of homologous recombination, including cooperative motions between regions, conserved sensing and effecting functional residue distribution, and conserved hub residues. Meanwhile, the unique ATP-DNA communication routes of each recombinase was also revealed. These results provide new insights into the mechanism of RecA/Rad51 family proteins, and provide new theoretical guidance for the development of allosteric inhibitors and the application of RecA/Rad51 family proteins.

An approach to rapidly identify the gender of the pigeon by using cross-priming amplification with immune-chromatographic strip

Most birds are monomorphic species and breeds, which makes it difficult to determine their gender by appearances, especially the pigeon is a farm animal with economic interest in meat production, ornamentals, sports, and experimental animals. Until now, the available methods for determining the gender of pigeons have mainly consisted of endoscopy, laparoscopy, karyotyping, polymerase chain reaction (PCR), and other similar techniques. Nonetheless, these methods have notable limitations, such as high expenses, invasiveness, and time-consuming procedures, which hinder their practicality for efficiently determining the gender of pigeons. Therefore, an easy, accurate, sensitive, on-site, affordable, and applicable rapid identification of the gender of the pigeon is widely needed for the owner of the pigeon. The purpose of this study was to develop and evaluate the efficacy of Cross-priming amplification (CPA) combined with an immune-chromatographic strip (CPA-strip) for gender identification of the pigeon. The methodology was optimized through various experimental trials. Subsequently, ten samples collected from pigeons were subjected to analysis using the optimized CPA-strip assay, and the results indicated that all female samples were accurately detected. In contrast, the blood samples collected from chickens and ducks were negative when tested with the CPA-strip assay. In conclusion, our study demonstrates the successful establishment of an immune-chromatographic CPA-strip assay for the on-site gender determination of pigeons with high accuracy.

Establishing a pulmonary aspergillus fumigatus infection diagnostic platform based on RPA-CRISPR-Cas12a

In this study, we devised a diagnostic platform harnessing a combination of recombinase polymerase amplification (RPA) and the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a system. Notably, this platform obviates the need for intricate equipment and finds utility in diverse settings. Two result display methods were incorporated in this investigation: the RPA-Cas12a-fluorescence method and the RPA-Cas12a-LFS (lateral flow strip). Upon validation, both display platforms exhibited no instances of cross-reactivity, with seven additional types of fungal pathogens responsible for respiratory infections. The established detection limit was ascertained to be as low as 102 copies/µL. In comparison to fluorescence quantitative PCR, the platform demonstrated a sensitivity of 96.7%, a specificity of 100%, and a consistency rate of 98.0%.This platform provides expeditious, precise, and on-site detection capabilities, thereby rendering it a pivotal diagnostic instrument amenable for deployment in primary healthcare facilities and point-of-care settings.

Rapid Detection of Measles Virus Using Reverse Transcriptase/Recombinase Polymerase Amplification Coupled with CRISPR/Cas12a and a Lateral Flow Detection: A Proof-of-Concept Study

The measles virus is highly contagious, and efforts to simplify its diagnosis are essential. A reverse transcriptase/recombinase polymerase amplification assay coupled with CRISPR/Cas12a and an immunochromatographic lateral flow detection (RT-RPA-CRISPR-LFD) was developed for the simple visual detection of measles virus. The assay was performed in less than 1 h at an optimal temperature of 42 °C. The detection limit of the assay was 31 copies of an RNA standard in the reaction tube. The diagnostic performances were evaluated on a panel of 27 measles virus RT-PCR-positive samples alongside 29 measles virus negative saliva samples. The sensitivity and specificity were 96% (95% CI, 81-99%) and 100% (95% CI, 88-100%), respectively, corresponding to an accuracy of 98% (95% CI, 94-100%; p < 0.0001). This method will open new perspectives in the development of the point-of-care testing diagnosis of measles.

Increase in the solubility of uvsY using a site saturation mutagenesis library for application in a lyophilized reagent for recombinase polymerase amplification

BACKGROUND

Recombinase uvsY from bacteriophage T4, along with uvsX, is a key enzyme for recombinase polymerase amplification (RPA), which is used to amplify a target DNA sequence at a constant temperature. uvsY, though essential, poses solubility challenges, complicating the lyophilization of RPA reagents. This study aimed to enhance uvsY solubility.

METHODS

Our hypothesis centered on the C-terminal region of uvsY influencing solubility. To test this, we generated a site-saturation mutagenesis library for amino acid residues Lys91-Glu134 of the N-terminal (His)6-tagged uvsY.

RESULTS

Screening 480 clones identified A116H as the variant with superior solubility. Lyophilized RPA reagents featuring the uvsY variant A116H demonstrated enhanced performance compared to those with wild-type uvsY.

CONCLUSIONS

The uvsY variant A116H emerges as an appealing choice for RPA applications, offering improved solubility and heightened lyophilization feasibility.

Rapid Isothermal Detection of Pathogenic Clostridioides difficile Using Recombinase Polymerase Amplification

Nosocomial-associated diarrhea due to Clostridioides difficile infection (CDI) is diagnosed after sample precultivation by the detection of the toxins in enzyme immunoassays or via toxin gene nucleic acid amplification. Rapid and direct diagnosis is important for targeted treatment to prevent severe cases and recurrence. We developed two singleplex and a one-pot duplex fluorescent 15 min isothermal recombinase polymerase amplification (RPA) assays targeting the toxin genes A and B (tcdA and tcdB). Furthermore, we adapted the singleplex RPA to a 3D-printed microreactor device. Analytical sensitivity was determined using a DNA standard and DNA extracts of 20 C. difficile strains with different toxinotypes. Nineteen clostridial and gastrointestinal bacteria strains were used to determine analytical specificity. Adaptation of singleplex assays to duplex assays in a 50 μL volume required optimized primer and probe concentrations. A volume reduction by one-fourth (12.4 μL) was established for the 3D-printed microreactor. Mixing of RPA was confirmed as essential for optimal analytical sensitivity. Detection limits (LOD) ranging from 119 to 1411 DNA molecules detected were similar in the duplex tube format and in the singleplex 3D-printed microreactor format. The duplex RPA allows the simultaneous detection of both toxins important for the timely and reliable diagnosis of CDI. The 3D-printed reaction chamber can be developed into a microfluidic lab-on-a-chip system use at the point of care.

Multiplex detection of the big five carbapenemase genes using solid-phase recombinase polymerase amplification

Five carbapenemase enzymes, coined the 'big five', have been identified as the biggest threat to worldwide antibiotic resistance based on their broad substrate affinity and global prevalence. Here we show the development of a molecular detection method for the gene sequences from the five carbapenemases utilising the isothermal amplification method of recombinase polymerase amplification (RPA). We demonstrate the successful detection of each of the big five carbapenemase genes with femtomolar detection limits using a spatially separated multiplex amplification strategy. The approach uses tailed oligonucleotides for hybridisation, reducing the complexity and cost of the assay compared to classical RPA detection strategies. The reporter probe, horseradish peroxidase, generates the measureable output on a benchtop microplate reader, but more notably, our study leverages the power of a portable Raman spectrometer, enabling up to a 19-fold enhancement in the limit of detection. Significantly, the development approach employed a solid-phase RPA format, wherein the forward primers targeting each of the five carbapenemase genes are immobilised to a streptavidin-coated microplate. The adoption of this solid-phase methodology is pivotal for achieving a successful developmental pathway when employing this streamlined approach. The assay takes 2 hours until result, including a 40 minutes RPA amplification step at 37 °C. This is the first example of using solid-phase RPA for the detection of the big five and represents a milestone towards the developments of an automated point-of-care diagnostic for the big five using RPA.

Current Trends in RNA Virus Detection via Nucleic Acid Isothermal Amplification-Based Platforms

Ribonucleic acid (RNA) viruses are one of the major classes of pathogens that cause human diseases. The conventional method to detect RNA viruses is real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR), but it has some limitations. It is expensive and time-consuming, with infrastructure and trained personnel requirements. Its high throughput requires sophisticated automation and large-scale infrastructure. Isothermal amplification methods have been explored as an alternative to address these challenges. These methods are rapid, user-friendly, low-cost, can be performed in less specialized settings, and are highly accurate for detecting RNA viruses. Microfluidic technology provides an ideal platform for performing virus diagnostic tests, including sample preparation, immunoassays, and nucleic acid-based assays. Among these techniques, nucleic acid isothermal amplification methods have been widely integrated with microfluidic platforms for RNA virus detection owing to their simplicity, sensitivity, selectivity, and short analysis time. This review summarizes some common isothermal amplification methods for RNA viruses. It also describes commercialized devices and kits that use isothermal amplification techniques for SARS-CoV-2 detection. Furthermore, the most recent applications of isothermal amplification-based microfluidic platforms for RNA virus detection are discussed in this article.

RLP system: A single-tube two-step approach with dual amplification cascades for rapid identification of EGFR T790M

BACKGROUND

The detection of cancer gene mutations in biofluids plays a pivotal role in revolutionizing disease diagnosis. The presence of a large background of wild-type sequences poses a challenge to liquid biopsy of tumor mutation genes. Suppressing the detection of wild-type sequences can reduce their interference, however, due to the minimal difference between mutant and wild-type sequences (such as single nucleotide variants differing by only one nucleotide), how to suppress the detection of wild-type sequences to the greatest extent without compromising the sensitivity of mutant sequence detection remains to be explored.

SIGNIFICANCE

The RLP system addresses the incompatibility between RPA and RT-PCR reactions through a physical separation strategy. Besides, due to the remarkable flexibility of locked nucleic acid probes, the RLP system emerges as a potent tool for detecting mutations across diverse genes. It excels in sensitivity and speed, tolerates plasma matrix, and is cost-effective. This bodes well for advancing the field of precision medicine.

RESULTS

The recombinase-assisted locked nucleic acid (LNA) probe-mediated dual amplification biosensing platform (namely RLP), which combines recombinase polymerase amplification (RPA) and LNA clamp PCR method in one tube, enabling highly sensitive and selective detection of EGFR T790M mutation under the help of well-designed LNA probes. This technique can quantify DNA targets with a limit of detection (LoD) at the single copy level and identify point mutation with mutant allelic fractions as low as 0.007 % in 45 min. Moreover, RLP has the potential for the direct detection of plasma samples without the need for nucleic acid extraction and the cost of a single test is less than 1USD. Furthermore, the RLP system is a cascading dual amplification reaction conducted in a single tube, which eliminates the risk of cross-contamination associated with opening multiple tubes and ensures the reliability of the results.

Mitochondrial genome provides species-specific targets for the rapid detection of early invasive populations of Hylurgus ligniperda in China

BACKGROUND

Hylurgus ligniperda, a major international forestry quarantine pest, was recently found to have invaded and posed a serious threat to the Pinus forests of the Jiaodong Peninsula in China. Continuous monitoring and vigilance of the early population is imperative, and rapid molecular detection technology is urgently needed. We focused on developing a single-gene-based species-specific PCR (SS-PCR) method.

RESULTS

We sequenced and assembled the mitochondrial genome of H. ligniperda to identify suitable target genes. We identified three closely related species for detecting the specificity of SS-PCR through phylogenetic analysis based on 13 protein-coding genes (PCGs). Subsequently, we analyzed the evolution of 13 PCGs and selected four mitochondrial genes to represent slow-evolving gene (COI) and faster-evolving genes (e.g. ND2, ND4, and ND5), respectively. We developed four species-specific primers targeting COI, ND2, ND4, and ND5 to rapidly identify H. ligniperda. The results showed that the four species-specific primers exhibited excellent specificity and sensitivity in the PCR assays, with consistent performance across a broader range of species. This method demonstrates the ability to identify beetles promptly, even during their larval stage. The entire detection process can be completed within 2-3 h.

CONCLUSIONS

This method is suitable for large-scale species detection in laboratory settings. Moreover, the selection of target genes in the SS-PCR method is not affected by the evolutionary rate. SS-PCR can be widely implemented at port and forestry workstations, significantly enhancing early management strategies and quarantine measures against H. ligniperda. This approach will help prevent the spread of the pest and effectively preserve the resources of Chinese pine forests.

Rapid analysis technologies with chemometrics for food authenticity field: A review

In recent years, the problem of food adulteration has become increasingly rampant, seriously hindering the development of food production, consumption, and management. The common analytical methods used to determine food authenticity present challenges, such as complicated analysis processes and time-consuming procedures, necessitating the development of rapid, efficient analysis technology for food authentication. Spectroscopic techniques, ambient ionization mass spectrometry (AIMS), electronic sensors, and DNA-based technology have gradually been applied for food authentication due to advantages such as rapid analysis and simple operation. This paper summarizes the current research on rapid food authenticity analysis technology from three perspectives, including breeds or species determination, quality fraud detection, and geographical origin identification, and introduces chemometrics method adapted to rapid analysis techniques. It aims to promote the development of rapid analysis technology in the food authenticity field.

Smartphone-assisted fluorescence-based detection of sunrise-type smart amplification process and a 3D-printed ultraviolet light-emitting diode device for the diagnosis of tuberculosis

Accurate and rapid diagnosis of infectious diseases plays a key role in clinical practice, especially in resource-limited countries. In this study, we integrated sunrise-type smart amplification process (s-SmartAmp), a convenient and sensitive isothermal amplification method for nucleic acid, into a portable 3D-printed device equipped with smartphone-assisted image analysis capabilities to develop a novel fluorescence-based sensing system for the on-site diagnosis of tuberculosis (TB). To increase the efficiency of fluorescence (or Förster) resonance energy transfer, two types of sunrise probe systems were compared to detect the IS6110 DNA sequence of TB. Subsequently, linear regression was conducted to compare the performance of s-SmartAmp and loop-mediated isothermal amplification (LAMP). The results indicated that, compared with LAMP, s-SmartAmp yielded more stable and precise results with lower background interference and high linear correlation coefficients (R2 = 0.9994 and 1, respectively) for the FAM-TAMRA and FITC-BHQ-1 probe system. The detection time was 45 min with a detection limit of 10 fg/μL. To evaluate the performance of our proposed on-site sensing system, we used s-SmartAmp 3D-printed ultraviolet light-emitting diode device to test multiple clinical samples of TB. Our findings suggest that the proposed system has the potential to achieve accurate and rapid on-site diagnosis of TB.

Real-time detection of Seneca Valley virus by one-tube RPA-CRISPR/Cas12a assay

Introduction

Senecavirus A (SVA) is a highly contagious virus that causes vesicular disease in pigs. At present, laboratory detection methods, such as virus isolation and polymerase chain reaction (PCR), required precision instruments and qualified personnel, making them unsuitable for point-of-care tests (POCT). Fortunately, the emergence of CRISPR/Cas system has provided new opportunities for fast and efficient pathogen detection.

Methods

This study successfully developed a precise and sensitive detection platform for diagnosing SVA by combining the CRISPR system with recombinase polymerase amplification (RPA).

Results

The minimum detection limit of the assay was 10 copies of the SVA genome. Meanwhile, the assay demonstrated high specificity. To validate the effectiveness of this system, we tested 85 swine clinical samples and found that the fluorescence method had a 100% coincidence rate compared to RT-qPCR.

Discussion

Overall, the RPA-CRISPR/Cas12a assay established in our study is a highly effective method for detecting SVA and holds great potential for practical applications in the resource-limited settings.

Development of Multienzyme Isothermal Rapid Amplification (MIRA) Combined with Lateral-Flow Dipstick (LFD) Assay to Detect Species-Specific tlh and Pathogenic trh and tdh Genes of Vibrio parahaemolyticus

Vibrio parahaemolyticus causes severe gastroenteritis in humans after consuming contaminated raw or undercooked seafood. A species-specific marker, the thermolabile hemolysin (tlh) gene, and two pathogenic markers, thermostable-related hemolysin (trh) and thermostable-direct hemolysin (tdh) genes, have been used to identify V. parahaemolyticus and determine its pathogenicity using both PCR and qPCR assays. To enable testing in field conditions with limited resources, this study aimed to develop a simple and rapid method to detect the species-specific (tlh) and pathogenic (trh and tdh) genes of V. parahaemolyticus using multienzyme isothermal rapid amplification (MIRA) combined with a lateral-flow dipstick (LFD). The amplification of the tlh, trh, and tdh genes could be completed within 20 min at temperatures ranging from 30 to 45 °C (p < 0.05). The test yielded positive results for V. parahaemolyticus but produced negative results for nine Vibrio species and eighteen foodborne pathogenic bacterial species. MIRA-LFD could detect 10 fg of DNA and 2 colony-forming units (CFU) of V. parahaemolyticus per reaction, demonstrating a sensitivity level comparable to that of qPCR, which can detect 10 fg of DNA and 2 CFU per reaction. Both MIRA-LFD and qPCR detected seven tlh-positive results from thirty-six oyster samples, whereas one positive result was obtained using the PCR assay. No positive results for the trh and tdh genes were obtained from any oyster samples using MIRA-LFD, PCR, and qPCR. This study suggests that MIRA-LFD is a simple and rapid method to detect species-specific and pathogenic genes of V. parahaemolyticus with high sensitivity.

Characterization of Heat-labile Uracil-DNA Glycosylase from Oncorhynchus mykiss and its Application for Carry-over Contamination Control in RT-qPCR

BACKGROUND

Heat-labile uracil-DNA glycosylase (HL-UDG) is commonly employed to eliminate carry-over contamination in DNA amplifications. However, the prevailing HL-UDG is markedly inactivated at 50°C, rendering it unsuitable for specific one-step RT-qPCR protocols utilizing reverse transcriptase at an optimal temperature of 42°C.

OBJECTIVE

This study aimed to explore novel HL-UDG with lower inactivation temperature and for recombinant expression.

METHODS

The gene encoding an HL-UDG was cloned from the cold-water fish rainbow trout (Oncorhynchus mykiss) and expressed in Escherichia coli with high yield. The thermostability of this enzyme and other enzymatic characteristics were thoroughly examined. The novel HL-UDG was then applied for controlling carry-over contamination in one-step RT-qPCR.

RESULTS

This recombinantly expressed truncated HL-UDG of rainbow trout (OmUDG) exhibited high amino acids similarity (84.1% identity) to recombinant Atlantic cod UDG (rcUDG) and was easily denatured at 40°C. The optimal pH of OmUDG was 8.0, and the optimal concentrations of both Na+ and K+ were 10 mM. Since its inactivation temperature was lower than that of rcUDG, the OmUDG could be used to eliminate carry-over contamination in one-step RT-qPCR with moderate reverse transcription temperature.

CONCLUSION

We successfully identified and recombinantly expressed a novel HL-UDG with an inactivation temperature of 40°C. It is suitable for eliminating carry-over contamination in one-step RT-qPCR.

Rapid visual nucleic acid detection of Vibrio alginolyticus by recombinase polymerase amplification combined with CRISPR/Cas13a

Vibrio alginolyticus (V. alginolyticus) is a common pathogen in the ocean. In addition to causing serious economic losses in aquaculture, it can also infect humans. The rapid detection of nucleic acids of V. alginolyticus with high sensitivity and specificity in the field is very important for the diagnosis and treatment of infection caused by V. alginolyticus. Here, we established a simple, fast and effective molecular method for the identification of V. alginolyticus that does not rely on expensive instruments and professionals. The method integrates recombinase polymerase amplification (RPA) technology with CRISPR system in a single PCR tube. Using this method, the results can be visualized by lateral flow dipstick (LFD) in less than 50 min, we named this method RPA-CRISPR/Cas13a-LFD. The method was confirmed to achieve high specificity for the detection of V. alginolyticus with no cross-reactivity with similar Vibrio and common clinical pathogens. This diagnostic method shows high sensitivity; the detection limit of the RPA-CRISPR/Cas13a-LFD is 10 copies/µL. We successfully identified 35 V. alginolyticus strains from a total of 55 different bacterial isolates and confirmed their identity by (Matrix-assisted laser desorption ionization time-of-flight mass spectrometry, MALDI-TOF MS). We also applied this method on infected mice blood, and the results were both easily and rapidly obtained. In conclusion, RPA-CRISPR/Cas13a-LFD offers great potential as a useful tool for reliable and rapid diagnosis of V. alginolyticus infection, especially in limited conditions.

Amplification of an Electrochemiluminescence-Emissive Aptamer into DNA Nanotags for Sensitive Fecal Calprotectin Determination

The precision additive manufacturing and tessellated multitasking out of the structural DNA nanotechnology enable a configurable expression of densified electrochemiluminescent (ECL) complexes, which would streamline the bioconjugation while multiplying signals. Herein, a completely DNA-scaffold ECL "polyploid" was replicated out via the living course of rolling circle amplification. The amplicon carried the aptameric sequences of ZnPPIX/TSPP porphyrin as photoreactive centers that rallied at periodical intervals of the persistent extension into a close-packed nanoflower, ZnPDFI/II. Both microscopies and electrophoresis proved the robust nesting of guests at their deployed gene loci, while multispectral comparisons among cofactor substituents pinpointed the pivotal roles of singlet seclusion and Zn2+-chelation for the sake of intensive ECL irradiation. The adversity-resilient hydrogel texture made lipoidal filmogens as porphyrinic ECL prerequisites to be of no need at all, thus not only simplifying assay flows but also inspiring an in situ labeling plan. Upon bioprocessing optimization, an enriched probe ZnPDFIII was further derived that interpolated the binding motif related to calprotectin as validated by molecular docking and affinity titration. With it being a strongly indicative marker of inflammatory bowel disease (IBD), a competitive ECL aptasensing strategy was contrived, managing a signal-on and sensitive detection in mild conditions with a subnanogram-per-milliliter limit of detection by 2 orders of magnitude lower than the standard method as well as a comparable accuracy in clinical stool sample testing. Distinct from those conventional chemophysical rebuilding routes, this de novo biosynthetic fusion demonstrated a promising alternative toward ECL-source bioengineering, which may intrigue vibrant explorations of other ECL-shedding fabrics and, accordingly, a new bioanalytic mode downstream.

Development and validation of real-time recombinase polymerase amplification-based assays for detecting HPV16 and HPV18 DNA

IMPORTANCE

HPV DNA screening is an effective approach for the prevention of cervical cancer. The novel real-time recombinase polymerase amplification-based HPV detection systems we developed constitute an improvement over the HPV detection methods currently used in clinical practice and should help to extend cervical cancer screening in the future, particularly in point-of-care test settings.

M13KO7 bacteriophage enables Potato Virus Y detection

IMPORTANCE

In this study, we confirmed the binding of M13KO7 to Potato virus Y (PVY) using enzyme-linked immunosorbent assay. M13KO7 is a "bald" bacteriophage in which no recombinant antibody is displayed. M13KO7 is easy to propagate by using Escherichia coli, making this method more reasonable in economic perspective. Based on this study, we suggest that M13KO7 detection system has applicability as a novel biological tool for the detection of PVY.

Evaluation of a Point-of-Need Molecular Diagnostic Tool Coupled with Rapid DNA Extraction Methods for Visceral Leishmaniasis

A rapid, cost-effective, and simple nucleic acid isolation technique coupled with a point-of-need DNA amplification assay is a desirable goal for programmatic use. For diagnosis of Visceral Leishmaniasis (VL), Recombinase Polymerase Amplification (RPA) rapid tests for the detection of Leishmania DNA are versatile and have operational advantages over qPCR. To facilitate the delivery of the RPA test at point-of-need for VL diagnosis, we compared two rapid DNA extraction methods, SwiftDx (SX) and an in-house Boil and Spin (BS) method, coupled with RPA amplification, versus more widely used methods for DNA extraction and amplification, namely Qiagen (Q) kits and qPCR, respectively. A total of 50 confirmed VL patients and 50 controls, matched for age and gender, were recruited from Mymensingh, Bangladesh, a region highly endemic for VL. Blood samples were collected from each participant and DNA was extracted using Q, SX and BS methods. Following DNA extraction, qPCR and RPA assays were performed to detect L. donovani in downstream analysis. No significant differences in sensitivity of the RPA assay were observed between DNA extraction methods, 94.00% (95% CI: 83.45-98.75%), 90% (95% CI: 78.19-96.67%), and 88% (95% CI: 75.69-95.47%) when using Q, SX, and BS, respectively. Similarly, using qPCR, no significant differences in sensitivity were obtained when using Q or SX for DNA extraction, 94.00% (95% CI: 83.45-98.75%) and 92.00% (80.77-97.78%), respectively. It is encouraging that RPA and qPCR showed excellent agreement (k: 0.919-0.980) when different extraction methods were used and that the DNA impurities using BS had no inhibitory effect on the RPA assay. Furthermore, significantly higher DNA yields were obtained using SX and BS versus Q; however, a significantly higher parasite load was detected using qPCR when DNA was extracted using Q versus SX. Considering the cost, execution time, feasibility, and performance of RPA assay, rapid extraction methods such as the Boil and Spin technique appear to have the potential for implementation in resource-limited endemic settings. Further clinical research is warranted prior to broader application.

New and rapid visual detection assay for Trogoderma granarium everts based on recombinase polymerase amplification and CRISPR/Cas12a

BACKGROUND

Khapra beetle (Trogoderma granarium Everts), one of the most important quarantine pests globally, is capable of causing severe infestation and huge economic loss to stored grain, and its interception rate has increased in major global trade countries over the past few years. However, difficulties remain in distinguishing this species with similar ones. In order to assist border ports and warehouses in khapra beetle's effective rapid identification as well as pest control at the early stages of monitoring or interception, we herein developed a new and rapid visual detection assay for T. granarium based on recombinase polymerase amplification (RPA) and the CRISPR/Cas12a system.

RESULTS

We designed and selected the first khapra beetle-specific RPA primers and crRNA, and optimized the visualization reaction system (Cas12a/CrRNA = 100 nM/500 nM). With only a 37 °C-heat-source and a blue light torch, RPA and CRISPR/CAS12a-based visualization assays can be completed within 40 min to differentiate between khapra beetle and nine similar Dermestidae species. After DNA extraction using a kit (4-5 h) or a simple method (5 min), the specific amplicons were obtained after a 15 min RPA reaction at 37 °C, followed by a 15 min color reaction under 37 °C in dark conditions using a CRISPR/CAS12a system and a fluorescent probe (5'-FAM/3'-BHQ1 labeled). This method is ingenious to low levels of DNA (10-1  ng μL-1 ) and meets the sensitivity requirements for detecting a single khapra beetle's egg (≈0.7 mm).

CONCLUSION

Our specificity and sensitivity analysis inferred that the present visualization system is effective to quickly and uniquely detect khapra beetle at room temperature (37 °C), thereby preventing this species before they spread widely. Our study is suitable for being pushed forward in storage pest management, and provides value as a reference for monitoring and identification of other pests. © 2023 Society of Chemical Industry.