Functionalized biochar-supported magnetic MnFe2O4 nanocomposite for the removal of Pb(ii) and Cd(ii)

Dual magnetization and amination of cellulosic chains for the efficient adsorption of heavy metals

Compounds functionalized with hydroxyl and amino groups were found to have good potential for the adsorption of different ions. In this work, a new system of cellulosic chains was amended with amine substitutions and bonded to a magnetic core of NiFe2O4@SiO2 to form NiFe2O4@SiO2-cellulose-NH2 system. The prepared sample showed suitable magnetic separation and was characterized via XRD, FT-IR, SEM, EDS, and TGA-DTA analyses. The adsorption potential of NiFe2O4@SiO2-cellulose-NH2 system has been investigated on the heavy metals (Cd, Ni, and Pb) removal from a synthetic wastewater environment. The results show that the magnetic property created by the magnetic core increased the recycling potential of the adsorbent and the magnetic core has a positive effect on the absorption potential of the polymer. The adsorption removal of Cd(II), Ni(II), and Pb(II) ions was studied using NiFe2O4@SiO2-cellulose-NH2 systems in different pH, temperatures, metal ion concentrations, and adsorbent dosages. The maximum adsorption capacities of single heavy metal ions were obtained as 406.44 mg/g (for Cd(II) ions), 411.63 mg/g (for Ni(II) ions), and 414.68 mg/g (for Pb(II) ions) under optimized conditions as pH = 6.5, ion concentration: 500 mg/L, adsorbent dosage: 1.2 g/L and room temperature.

Fe Crystalline Phases in Fe/C Composites Modulated the Selective Adsorption of Pb(II) from Industrial Wastewater with Cd(II): An Electronic-Scale Perspective

Fe oxide or Fe0-based materials display weak removal capacity for Pb(II), especially in the presence of Cd(II), and the electronic-scale mechanisms are not reported. In this study, Fe3C(220) modified black carbon (BC) [Fe3C(220)@BC] with high adsorption and selectivity for Pb(II) from industrial wastewater with Cd(II) was developed. The quantitative experiment suggested that Fe species accounted for 80.5-100 and 18.4-33.8% of Pb(II) and Cd(II) removal, respectively. Based on X-ray absorption near-edge structure analysis, 57.3% of adsorbed Pb2+ was reduced to Pb0; however, 61.6% of Cd2+ existed on Fe3C@BC. Density functional theory simulation unraveled that Cd(II) adsorption was attributed to the cation-π interaction with BC, whereas that of Pb(II) was ascribed to the stronger interactions with different Fe phases following the order: Fe3C(220) > Fe0(110) > Fe3O4(311). Crystal orbital bond index and Hamilton population analyses were innovatively applied in the adsorption system and displayed a unique discovery: the stronger Pb(II) adsorption on Fe phases was mediated by a combination of covalent and ionic bonding, whereas ionic bonding was mainly accounted for Cd(II) adsorption. These findings open a new chapter in understanding the functions of different Fe phases in mediating the fate and transport of heavy metals in both natural and engineered systems.

Transformation of As and Cd associated with Fe-Mn-modified biochar during simultaneous remediation on the contaminated soil

Here, Fe- and Mn-modified biochar (BC-Fe-Mn) was applied to simultaneously stabilize As and Cd in the contaminated soil. The removal efficiencies for NaHCO3-extractable As and DTPA-extractable Cd by BC-Fe-Mn were 60.8% and 49.6%, respectively. The speciation analyses showed that the transformation to low-crystallinity Fe-bound (F3) As, Fe-Mn oxide-bound (OX) of Cd, and residual As and Cd was primarily attributed to stabilizing the two metal(loid)s. Moreover, the correlation analyses showed that the increase of As in F3 fraction was significantly and positively associated with the increase of OX fraction Mn (r = 0.64). Similarly, OX fraction Cd was increased notably with increasing OX fraction Fe (r = 0.91) and OX fraction Mn (r = 0.76). In addition, a novel dialysis experiment was performed to separate the reacted BC-Fe-Mn from the soil for intensively investigating the stabilization mechanisms for As and Cd by BC-Fe-Mn. The characteristic crystalline compounds of (Fe0.67Mn0.33)OOH and Fe2O3 on the surface of BC-Fe-Mn were revealed by SEM-EDS and XRD. And FTIR analyses showed that α-FeOOH, R-COOFe/Mn+, and O-H on BC-Fe-Mn potentially served as the reaction sites for As and Cd. A crystalline compound of MnAsO4 was found in the soil treated by BC-Fe-Mn in the dialysis experiment. Thus, our results are beneficial to deeper understand the mechanisms of simultaneous stabilization of As and Cd by BC-Fe-Mn in soil and support the application of the materials on a large scale.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Unlocking the potential of biochar: an iron-phosphorus-based composite modified adsorbent for adsorption of Pb(II) and Cd(II) in aqueous environments and response surface optimization of adsorption conditions

In this work, iron-phosphorus based composite biochar (FPBC) was prepared by modification with potassium phosphate and iron oxides for the removal of heavy metal ions from single and mixed heavy metal (Pb and Cd) solutions. FTIR and XPS characterization experiments showed that the novel modified biochar had a greater number of surface functional groups compared to the pristine biochar. The maximum adsorption capacities of FPBC for Pb(II) and Cd(II) were 211.66 mg·g-1 and 94.08 mg·g-1 at 293 K. The adsorption of Pb(II) and Cd(II) by FPBC followed the proposed two-step adsorption kinetic model and the Freundlich isothermal adsorption model, suggesting that the mechanism of adsorption of Pb(II) and Cd(II) by FPBC involved chemical adsorption of multiple layers. Mechanistic studies showed that the introduction of -PO4 and -PO3 chemisorbed with Pb(II) and Cd(II), and the introduction of -Fe-O increased the ion exchange with Pb(II) and Cd(II) during the adsorption process and produced precipitates such as Pb3Fe(PO4)3 and Cd5Fe2(P2O7)4. Additionally, the abundant -OH and -COOH groups also participated in the removal of Pb(II) and Cd(II). In addition, FPBC demonstrated strong selective adsorption of Pb(II) in mixed heavy metal solutions. The Response Surface Methodology(RSM) analysis determined the optimal adsorption conditions for FPBC as pH 5.31, temperature 26.01 °C, and Pb(II) concentration 306.30 mg·L-1 for Pb(II). Similarly, the optimal adsorption conditions for Cd(II) were found to be pH 5.66, temperature 39.34 °C, and Cd(II) concentration 267.68 mg·L-1. Therefore, FPBC has the potential for application as a composite-modified adsorbent for the adsorption of multiple heavy metal ions.

Polyethylenimine Grafted onto Nano-NiFe2O4@SiO2 for the Removal of CrO42-, Ni2+, and Pb2+ Ions from Aqueous Solutions

Polyethyleneimine (PEI) has been reported to have good potential for the adsorption of metal ions. In this work, PEI was covalently bound to NiFe2O4@SiO2 nanoparticles to form the new adsorbent NiFe2O4@SiO2-PEI. The material allowed for magnetic separation and was characterized via powder X-ray diffraction (PXRD), showing the pattern of the NiFe2O4 core and an amorphous shell. Field emission scanning electron microscopy (FE-SEM) showed irregular shaped particles with sizes ranging from 50 to 100 nm, and energy-dispersive X-ray spectroscopy (EDX) showed high C and N contents of 36 and 39%, respectively. This large amount of PEI in the materials was confirmed by thermogravimetry-differential thermal analysis (TGA-DTA), showing a mass loss of about 80%. Fourier-transform IR spectroscopy (FT-IR) showed characteristic resonances of PEI dominating the spectrum. The adsorption of CrO42-, Ni2+, and Pb2+ ions from aqueous solutions was studied at different pH, temperatures, metal ion concentrations, and adsorbent dosages. The maximum adsorption capacities of 149.3, 156.7, and 161.3 mg/g were obtained for CrO42-, Ni2+, and Pb2+, respectively, under optimum conditions using 0.075 g of the adsorbent material at a 250 mg/L ion concentration, pH = 6.5, and room temperature.

A practical evaluation on integrated role of biochar and nanomaterials in soil remediation processes

Soil decontamination and restoration continue to be a key environmental concern around the globe. The degradation of soil resources due to the presence of potentially toxic elements (PTEs) has a substantial influence on agricultural production, food security, and human well-being, and as a result, urgent action is required. PTEs pollution is not a threat to the agroecosystems but also a serious concern to human health; thereby, it needs to be addressed timely and effectively. Hence, the development of improved and cost-effective procedures to remove PTEs from polluted soils is imperative. With this context in mind, current review is designed to distinctly envisage the PTEs removal potential by the single and binary applications of biochar (BC) and nanomaterials (NMs).2 Recently, BC, a product of high-temperature biomass pyrolysis with high specific surface area, porosity, and distinctive physical and chemical properties has become one of the most used and economic adsorbent materials. Also, biochar's application has generated interest in a variety of fields and environments as a modern approach against the era of urbanization, industrialization, and climate change. Likewise, several NMs including metals and their oxides, carbon materials, zeolites, and bimetallic-based NMs have been documented as having the potential to remediate PTEs-polluted environments. However, both techniques have their own set of advantages and disadvantages, therefore combining them can be a more effective strategy to address the growing concern over the rapid accumulation and release of PTEs into the environment.

Cadmium and lead removal by Mg/Fe bimetallic oxide-loaded sludge-derived biochar: batch adsorption, kinetics, and mechanism

Biochar is a valuable adsorbent for the removal of heavy metals from water, and it is important to explore ways to increase its heavy metal adsorption capacity. In this study, Mg/Fe bimetallic oxide was loaded onto sewage sludge-derived biochar to enhance its heavy metal adsorption capacity. Batch adsorption experiments for the removal of Pb(II) and Cd(II) were performed to evaluate the removal efficiency of Mg/Fe layer bimetallic oxide-loaded sludge-derived biochar ((Mg/Fe)LDO-ASB). The physicochemical properties of (Mg/Fe)LDO-ASB and corresponding adsorption mechanisms were studied. The maximum adsorption capacities of (Mg/Fe)LDO-ASB for Pb(II) and Cd(II), which were calculated by isotherm model, were 408.31 and 270.41 mg/g, respectively. Adsorption kinetics and isotherms analysis showed that the dominant adsorption process of Pb(II) and Cd(II) uptake by (Mg/Fe)LDO-ASB was spontaneous chemisorption and heterogeneous multilayer adsorption, and film diffusion was the rate-limiting step. SEM-EDS, FTIR, XRD, and XPS analyses revealed that the Pb and Cd adsorption processes of (Mg/Fe)LDO-ASB involved oxygen-containing functional group complexation, mineral precipitation, electron-π-metal interactions, and ion exchange. The order of their contribution was as follows: mineral precipitation (Pb: 87.92% and Cd: 79.91%) > ion exchange (Pb: 9.84% and Cd: 16.45%) > metal-π interaction (Pb: 0.85% and Cd: 0.73%) > oxygen-containing functional group complexation (Pb: 1.39% and Cd: 2.91%). Mineral precipitation was the main adsorption mechanism, and ion exchange played a crucial role in Pb and Cd adsorption.

Nanomaterials in biochar: Review of their effectiveness in remediating heavy metal-contaminated soils

Biochar can be used for soil remediation in environmentally beneficial manner, especially when combined with nanomaterials. After a decade of research, still, no comprehensive review was conducted on the effectiveness of biochar-based nanocomposites in controlling heavy metal immobilization at soil interfaces. In this paper, the recent progress in immobilizing heavy metals using biochar-based nanocomposite materials were reviewed and compared their efficacy against that of biochar alone. In details, an overview of results on the immobilization of Pb, Cd, Cu, Zn, Cr, and As was presented by different nanocomposites made by various biochars derived from kenaf bar, green tea, residual bark, cornstalk, wheat straw, sawdust, palm fiber, and bagasse. Biochar nanocomposite was found to be most effective when combined with metallic nanoparticles (Fe₃O₄ and FeS) and carbonaceous nanomaterials (graphene oxide and chitosan). This study also devoted special consideration to different remediation mechanisms by which the nanomaterials affect the effectiveness of the immobilization process. The effects of nanocomposites on soil characteristics related to pollution migration, phytotoxicity, and soil microbial composition were assessed. A future perspective on nanocomposites' use in contaminated soils was presented.

Nigella sativa-Manganese Ferrite-Reduced Graphene Oxide-Based Nanomaterial: A Novel Adsorbent for Water Treatment

In this study, a novel nanohybrid composite was fabricated via the incorporation of manganese ferrite (MnFe2O4) nanoparticles into the integrated surface of reduced graphene oxide (rGO) and black cumin seeds (BC). The nanohybrid composite was prepared by a simple co-precipitation method and characterized by several spectroscopic and microscopic techniques. The characterization analysis revealed that the rGO-BC surface was decorated with the MnFe2O4. The strong chemical interaction (via electrostatic and H-bonding) between the integrated surface of rGO-BC and MnFe2O4 nanoparticles has been reported. The prepared composite was highly porous with a heterogeneous surface. The average size of the prepared composite was reported in the ranges of 2.6-7.0 nm. The specific surface area of the prepared composite was calculated to be 50.3 m2/g with a pore volume of 0.061 cc/g and a half pore width of 8.4 Å. As well, many functional sites on the nanohybrid composite surface were also found. This results in the excellent adsorption properties of nanohybrid composite and the effectual elimination of methylene blue dye from water. The nanohybrid was tested for various linear isotherms, such as Langmuir and Freundlich, for the adsorption of methylene blue dye. The Freundlich isotherm was the well-fitted model, proving the adsorption is multilayer. The maximum Langmuir adsorption capacity of nanohybrid composite for methylene blue was reported to be 74.627 mg/g at 27 °C. The adsorption kinetics followed the pseudo-second-order recommended surface interaction between the dye and nanohybrid composite. The interaction between methylene blue and the nanohybrid composite was also confirmed from the FTIR spectrum of the methylene blue-loaded adsorbent. The rate-determining step for the present study was intraparticle diffusion. Temperature-dependent studies of methylene blue adsorption were also carried out to estimate adsorption's free energy, enthalpy, and entropy. The methylene blue adsorption was feasible, spontaneous, and endothermic. A comparison study revealed that the present materials could be successfully prepared and used for wastewater treatment.

Effective decontamination of methylene blue from aqueous solutions using novel nano-magnetic biochar from green pea peels

The conversion of agricultural waste into high-value carbon products has been an attractive area in waste management strategy. This study highlighted the synthesis and effectiveness of green pea peels (GPP), green pea biochar (GPBC), and nano-ferromagnetic green pea biochar (NFGPBC) by the ferrous/ferric co-precipitation synthesis method for eliminating cationic dyes molecules from solutions. The morphological, physicochemical, and structural properties of GPP, GPBC, and NFGPBC were approved by Scanning Electron Microscopy (SEM), Transmission Emission Microscopy (TEM), Energy Dispersive X-ray (EDX), Bruneau Emmett Teller (BET), Fourier Transform Infrared spectroscopy (FTIR), and X-ray Diffraction (XRD) techniques. Vibrating Sample Magnetometry (VSM) analysis confirmed the NFGPBC magnetization performance. The capacity of each adsorbent for methylene blue removal was evaluated at various parameters of material dosage (50-250 mg/150 mL), pH (2-12), initial concentration (50-250 mg/L), contact time (0-90 min) and temperature (20-60 °C). The three developed adsorbent materials GPP, GPBC, and NFGPBC, possessed reasonable BET surface areas of 0.6836, 372.54, and 147.88 m2g-1, and the corresponding monolayer adsorption capacities of 163.93, 217.40, and 175.44 mg/g, respectively. The superior performances of GPBC and NFGPBC were due to their increased surface area compared with the parent green pea peels (GPP). The results from adsorption kinetics studies of all prepared materials were pseudo-second-order and Elovich kinetics models. The thermodynamic parameters exhibited MB sorption's favorability, spontaneity, and endothermic nature. The NFGPBC material experienced Vander Waal forces, electrostatic interaction, hydrogen bonding, and hydrophobic interactions as predominant modes of the solid-liquid interaction. The regeneration, recycling, and reusability of the synthesized GPP, GPBC, and NFGPBC performed at five adsorption cycles revealed that NFGPBC demonstrated excellent cyclical performances attaining a minimum 8.9% loss in capacity due to paramagnetic properties. Thus, NFGPBC is a green, efficient, and eco-friendly material recommended for large-scale production and application in wastewater.

Solvent-Free Synthesis of Magnetic Sewage Sludge-Derived Biochar for Heavy Metal Removal from Wastewater

The commonly used two-step and one-pot synthesis methods for producing biochar require the use of iron salt solutions, resulting in the undesirable consequences of energy consumption for dewatering and potential pollution risks. To address this drawback, a magnetic sewage sludge-derived biochar (MSBC-2) was synthesized by a solvent-free method in this study. The pseudo-second-order kinetic model and Langmuir model provided the best fit to the experimental data, implying a monolayered chemisorption process of Pb2+, Cd2+and Cu2+ onto MSBC-2. As the reaction temperature increased from 25 °C to 45 °C, the maximum adsorption capacities increased from 113.64 mg·g−1 to 151.52 mg·g−1 for Pb2+, from 101.01 mg·g−1 to 109.89 mg·g−1 for Cd2+ and from 57.80 mg·g−1 to 74.07 mg·g−1 for Cu2+, respectively. Thermodynamic parameters (ΔG0 < 0, ΔS0 > 0, ΔH0 > 0) revealed that the adsorption processes of all three metals by MSBC-2 were favourable, spontaneous and endothermic. Surface complexation, cation-π interaction, ion exchange and electrostatic attraction mechanisms were involved in the adsorption of Pb2+, Cd2+ and Cu2+ onto MSBC-2. Overall, this study will provide a new perspective for the synthesis of magnetic biochar and MSBC-2 shows great potential as an adsorbent for heavy metal removal.

Comparison of cadmium adsorption by hydrochar and pyrochar derived from Napier grass

Biochar (e.g. pyrochar and hydrochar) is considered a promising adsorbent for Cd removal from aqueous solution. Considering the vastly different physicochemical properties between pyrochar and hydrochar, the Cd²⁺ sorption capacity and mechanisms of pyrochars and hydrochars should be comparatively determined to guide the production and application of biochar. In this study, the hydrochars and pyrochars were prepared from Napier grass by hydrothermal carbonization (200 and 240 °C) and pyrolysis (300 and 500 °C), respectively, and the physicochemical properties and Cd²⁺ sorption performances of biochars were systematically determined. The pyrochars had higher pH and ash content as well as better stability, while the hydrochars showed more oxygen-containing functional groups (OFGs) and greater energy density. The pseudo second order kinetic model best fitted the Cd²⁺ sorption kinetics data of biochars, and the isotherm data of pyrochar and hydrochar were well described by Langmuir and Freundlich models, respectively. In comparison with hydrochar, the pyrochar exhibited better Cd²⁺ sorption capacity (up to 71.47 mg/g). With increasing production temperature, the Cd²⁺ sorption capacity of pyrochar elevated, while the reduction was found for hydrochar. The mineral interaction, complexation with surface OFGs, and coordination with π electron were considered the main mechanisms of Cd²⁺ removal by biochars. The minerals interaction and the complexation with OFGs was the dominant mechanism of Cd²⁺ removal by pyrochars and hydrochars, respectively. Therefore, the preparation technique and temperature have significant impacts on the sorption capacity and mechanisms of biochar, and pyrochar has better potential for Cd²⁺ removal than the congenetic hydrochar.

One-Step Pyrolysis Fabrication of Magnetic Bagasse Biochar Composites with Excellent Lead Adsorption Performance

In the present study, a magnetically separable adsorbent, manganese ferrite (MnFe₂O₄)/sugarcane bagasse biochar magnetic composites (MFSCBB-MCs), was fabricated through a one-step pyrolysis method. The characterization of the prepared adsorbents indicated that MnFe₂O₄ nanoparticles were successfully embedded into the biochar matrix, offering magnetic separability and increasing the negative charges on the surface relative to the pristine biochar. Batch adsorption tests indicated that the adsorption of lead on MFSCBB-MCs was pH- and dose-dependent. The experimental results were effectively fitted using the pseudo-second-order kinetic model (R ² > 0.99) and the Langmuir isotherm equation (R ² > 0.99), indicating the main chemisorption pathway and monolayer coverage process. Meanwhile, lead adsorption was found to be spontaneous and endothermic, as shown by the study of thermodynamic parameters. The maximum capacity, q _m, calculated from the Langmuir model was 155.21 mg·g^-1 at 25 °C, demonstrating excellent adsorption capability compared with several previously reported bagasse adsorbents. Based on adsorption mechanism analysis, physical adsorption, electrostatic attraction, and complexation were all involved in the lead(II) adsorption process on MFSCBB-MCs. Furthermore, the adsorbent was easily regenerated as indicated by the high magnetic separation and chemical desorption potential after five cycles, so it is a cost-effective and environmentally favorable adsorbent for wastewater lead removal.

Reutilization of waste biomass from sugarcane bagasse and orange peel to obtain carbon foams: Applications in the metal ions removal

The high levels of heavy metals contained in residual water and the pollution generated by a large amount of unexploited agro-industrial waste are a serious problem for the environment and mankind. Therefore, in the present work, with the aim of treating and reducing the pollution caused by heavy metal ions (Pb, Cd, Zn and Cu), activated carbons (ACs) were synthesized from sugarcane bagasse (SCB) and orange peel (OP) by means of physical - chemical activation method in an acid medium (H₃PO_4, 85 wt%) followed by an activation at high temperature (500 and 700 °C). Thereafter, these materials were used to produce carbon foams (CF) by the replica method and to evaluate their adsorbent capacity for the removal of heavy metals from synthetic water. XRD, FTIR, DLS, BET, Zeta Potential (ζ), SEM-EDS and AAS were used to investigate their structures, surface area, pore size, morphology, and adsorption capacity. The results show that as-prepared CF have a second level mesoporous structure and AC present a micro-mesoporous structure with a pore diameter between 3 and 4 nm. The experimental adsorption capacities of heavy metals showed that the CF from OP present a better elimination of heavy metals compared to the AC; exhibiting a removal capacity of 95.2 ± 3.96% (Pb) and 94.7 ± 4.88% (Cu) at pH = 5. The adsorption values showed that the optimal parameters to reach a high metal removal are pH values above 5. In the best of cases, the minimum remaining concentration of lead and copper were 2.4 and 2.6 mg L^-1, respectively. The experimental data for carbon adsorbents are in accordance with the Langmuir and BET isotherms, with R² = 0.99 and the maximum homogenous biosorption capacity for lead and copper was Q_max = 968.72 and 754.14 mg g^-1, respectively. This study showed that agro-industrial wastes can be effectively retrieved to produce adsorbents materials for wastewater treatment applications.

The potential of biochar-photocatalytic nanocomposites for removal of organic micropollutants from wastewater

Biochar (BC)-photocatalyst nanocomposites have emerged as appealing water and wastewater treatment technology. Such nanocomposite materials benefit from the synergistic effect of adsorption and photocatalysis to attain improved removal of pollutants from water and wastewater. Under this review, three BC-based nanocomposite photocatalysts such as BC-TiO₂, BC-ZnO, and BC-spinel ferrites were considered. These nanocomposites acquire intrinsic properties to improve the practical limitations of the pristine BC and photocatalysts. The BC-based nanocomposites attained high photocatalytic activity, mechanical hardness, thermal stability, chemically non-reactive, magnetically permeable, reduced energy band gaps, improved reusability, and simplified recovery. Moreover, BC-based photocatalytic nanocomposites showed reduced recombination rates of the electron-hole pairs which are desirable for photocatalytic applications. However, the surface areas of the composites are usually smaller than that of the BC but higher than those of the pristine photocatalysts. Practically, the performances of the nanocomposites are much superior to those of the corresponding pristine components. This hybrid treatment technology is an emerging field and its industrial application is still at an early stage of the investigation. Therefore, exploring the full potential and practical applications of this technology is highly encouraging. Hence, this review focused on the critical evaluation of the most recent research on the synthesis, characterization, and photocatalytic treatment efficiency of the BC photocatalyst nanocomposites towards emerging pollutants in the aqueous medium. Moreover, the influence of various sources of BC feedstocks and their limitations on adsorption and photodegradation activities are discussed in detail. Finally, concluding remarks and future research directions are given to assist and shape the exploration of BC-based nanocomposite photocatalysts in water treatment.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.

Controllable synthesis of bifunctional corn stalk cellulose as a novel adsorbent for efficient removal of Cu2+ and Pb2+ from wastewater

A corn stalk cellulose-based adsorbent with bifunctional groups of -NH-/-NH₂ and C-S/C=S for efficient removal of Cu²⁺ and Pb²⁺ was successfully synthesized. Under specific alkali and reaction conditions, 4.58 mmol/g of C-S/C=S groups were further introduced on surface of aminated cellulose with 6.99 mmol/g of amino groups. The introduced CS₂ would only participate in the esterification with -NH₂ groups to form special dithiocarbamate (DTC) structures containing -NH- groups (-NHCS₂^-). The synthesized DTC structures would not reduce total amount of -NH-/-NH₂ groups on aminated cellulose to keep its excellent adsorption performance for Cu²⁺, and the introduced appropriate number of C-S/C=S groups could ensure the efficient removal of Pb²⁺. It was suitable for removal of coexisting Cu²⁺ and Pb²⁺ with low initial concentration in real wastewater, and the removal rates were both close to 100%. The application of the bifunctional cellulose offered a novel way for purpose of 'waste treatment by waste'.

Heavy Metal Adsorption Using Magnetic Nanoparticles for Water Purification: A Critical Review

Research on contamination of groundwater and drinking water is of major importance. Due to the rapid and significant progress in the last decade in nanotechnology and its potential applications to water purification, such as adsorption of heavy metal ion from contaminated water, a wide number of articles have been published. An evaluating frame of the main findings of recent research on heavy metal removal using magnetic nanoparticles, with emphasis on water quality and method applicability, is presented. A large number of articles have been studied with a focus on the synthesis and characterization procedures for bare and modified magnetic nanoparticles as well as on their adsorption capacity and the corresponding desorption process of the methods are presented. The present review analysis shows that the experimental procedures demonstrate high adsorption capacity for pollutants from aquatic solutions. Moreover, reuse of the employed nanoparticles up to five times leads to an efficiency up to 90%. We must mention also that in some rare occasions, nanoparticles have been reused up to 22 times.

Preparation and Application in Water Treatment of Magnetic Biochar

This paper reviews the preparation of magnetic biochar and its application in wastewater treatment, and briefly discusses the adsorption mechanism of biochar to remove pollutants and the modification methods of biochar. Due to the good physical and chemical properties of biochar, including its rough porous structure, it has been widely used to absorb pollutants from water. Magnetic biochar is commonly prepared by combining biochar with magnetic material. The biochar is endowed with the characteristics of the magnetic material, which could effectively solve the problems of difficult recovery and easy loss of adsorbent in water treatment. Magnetic biochar with high carbon content, large specific surface area, magnetic separation, and other excellent properties, has become a hot research topic in recent years. The preparation methods and application properties of magnetic biochar are reviewed. The future research directions of magnetic biochar are put forward to provide directions for further research and application of magnetic biochar materials.

Application of Modified Spent Mushroom Compost Biochar (SMCB/Fe) for Nitrate Removal from Aqueous Solution

The public is already aware that nitrate pollution caused by nutrient runoff from farms is harmful to aquatic life and human health, and there is an urgent need for a product/technology to solve this problem. A biochar adsorbent was synthesized and used to remove nitrate ions from aqueous media based on spent mushroom compost (SMC), pre-treated with iron (III) chloride hexahydrate and pyrolyzed at 600 °C. The surface properties and morphology of SMCB/Fe were investigated using Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The effect of main parameters such as the adsorbent dosages, pH of the solutions, contact times, and ion concentrations on the efficiency of nitrate removal was investigated. The validity of the experimental method was examined by the isothermal adsorption and kinetic adsorption models. The nitrate sorption kinetics were found to follow the pseudo-second-order model, with a higher determination coefficient (0.99) than the pseudo-first-order (0.86). The results showed that the maximum percentage of nitrate adsorption was achieved at equilibrium pH 5-7, after 120 min of contact time, and with an adsorbent dose of 2 g L-1. The highest nitrate adsorption capacity of the modified adsorbent was 19.88 mg g-1.

Hierarchically porous magnetic biochar as an efficient amendment for cadmium in water and soil: Performance and mechanism

Three types of hierarchically porous magnetic biochars (HMBs) were prepared by pyrolyzing low-cost wheat straw and potassium ferrate (K₂FeO₄) under a nitrogen atmosphere at 600, 700 and 800 °C, respectively, which could be used as amendments for cadmium (Cd) in water and soil. HMB fabricated at 700 °C (HMB700) had the best remediation performance for Cd in water and soil, which was mainly due to its largest specific surface area and micropore volume. Batch sorption experiments showed that Cd(II) sorption onto HMBs were well-described by a pseudo-second-order model and Sips (Freundlich-Langmuir) model, indicating that HMBs removed Cd(II) mainly through chemical adsorption. MINTEQ modeling evidenced that HMBs adsorbed Cd(II) mainly through precipitation rather than surface complexation. The adsorption behavior of HMB700 to Cd(II) could be explained by surface complexation (-OCd, -COOCd), precipitation (Cd(OH)₂ and CdCO₃), physical adsorption (rich pore structure) and ion exchange (K⁺, Ca²⁺, Mg²⁺). Furthermore, adding HMBs (1 wt%) (incubation 60 days) could also significantly increase soil pH and electrical conductivity (EC), and significantly reduce the available Cd content in soil (47.97%-61.38%). Adding HMBs could promote the conversion of bioavailable to less bioavailable Cd forms. These results provided a new idea for fabricating agricultural waste-based HMBs to remediate Cd in water and soil.

Review of organic and inorganic pollutants removal by biochar and biochar-based composites

Biochar (BC) has exhibited a great potential to remove water contaminants due to its wide availability of raw materials, high surface area, developed pore structure, and low cost. However, the application of BC for water remediation has many limitations. Driven by the intense desire of overcoming unfavorable factors, a growing number of researchers have carried out to produce BC-based composite materials, which not only improved the physicochemical properties of BC, but also obtained a new composite material which combined the advantages of BC and other materials. This article reviewed previous researches on BC and BC-based composite materials, and discussed in terms of the preparation methods, the physicochemical properties, the performance of contaminant removal, and underlying adsorption mechanisms. Then the recent research progress in the removal of inorganic and organic contaminants by BC and BC-based materials was also systematically reviewed. Although BC-based composite materials have shown high performance in inorganic or organic pollutants removal, the potential risks (such as stability and biological toxicity) still need to be noticed and further study. At the end of this review, future prospects for the synthesis and application of BC and BC-based materials were proposed. This review will help the new researchers systematically understand the research progress of BC and BC-based composite materials in environmental remediation.

Immobilization of Ni (Ⅱ) at three levels of contaminated soil by rhamnolipids modified nano zero valent iron (RL@nZVI): Effects and mechanisms

A kind of biosurfactant rhamnolipid modified zero-valent iron nanoparticles have been synthesized and applied to evaluate the immobilization efficiency of Ni (Ⅱ) contaminated soil at three concentration levels (200Ni, 600Ni and 1800Ni). The results of SEM and XRD were clearly indicative of the well-attached phenomenon of rhamnolipid on the nZVI, featuring better stability and dispersity, and FTIR analysis proposed the interactions between rhamnolipid and nZVI through monodentate chelating between carboxylate groups and nZVI or hydrogen bonding with Fe-O groups on the surface. Sequential extraction procedures (SEP) analysis illustrated that the majority of labile fractions had been transformed into less accessible fractions (Fe-Mn oxide-bound fractions and residual fractions) after 28 days of incubation. And for low-concentrations polluted soil, soil self-remediation played a dominant role, while RL@nZVI exhibited a more significant stabilizing effect for medium and high-concentrations pollution. Furthermore, XPS and XRD analyses of Ni-adsorbed RL@nZVI identified the formation of NiO, Ni(OH)₂ and revealed the possible interaction mechanisms including reduction, adsorption and precipitation/co-precipitation. These results confirmed that RL@nZVI presented a promising prospect for the immobilization of Ni polluted soil.

High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon: Insights into the adsorption mechanisms

In this study, activated carbon was derived from pulverized waste tires using carbonization and chemical activation techniques. Single and competitive batch adsorption experiments for the removal of three synthetic heavy metal ions (Pb^2+, Cu²⁺ and Zn²⁺) from an aqueous solution were performed to benchmark the efficiency of the Tire-derived Activated Carbon (TAC) in comparison to that of commercial activated carbon (CAC), which was used as the reference material. The sorbents physicochemical properties with corresponding adsorption mechanisms were evaluated by different experimental techniques. TAC exhibited great potential to adsorb heavy metals, with monolayer adsorption capacities as high as 322.5, 185.2, and 71.9 mg g^-1 for Pb²⁺, Cu²⁺ and Zn²⁺, respectively, which were significantly higher than the adsorption capacities exhibited by CAC, which were 42.5, 15.0, and 14.0 mg∙g^-1 for Pb²⁺, Cu²⁺ and Zn²⁺, respectively. Competitive adsorption results demonstrated the adsorption ability of sorbents is restricted by presence of other ions, and was decreased compared to the single sorption. Sorption kinetics data, with better fit to the pseudo-second order kinetics model, revealed that TAC had faster sorption rate in comparison to CAC. The adsorption capacities of TAC and CAC were reduced to half of their initial capacities after three successive adsorption-desorption cycles. Zeta potential, FT-IR, and XPS analyses revealed that electrostatic attraction and surface complexation mechanisms, as two metal-adsorbing mechanisms, were more influential for TAC. For CAC, a higher cation exchange capacity (CEC) value indicated that the removal of heavy metals by ion exchange was the predominant mechanism.

Facile preparation of sulfonated biochar for highly efficient removal of toxic Pb(II) and Cd(II) from wastewater

Biochar is deemed as the ideal material for the effective removal of heavy metals in wastewater treatment. Herein, we developed a facile one-step solvothermal method for the preparation of sulfonated biochar (SBC) from Axonopus compressus under a low-temperature condition. FTIR and XPS analysis demonstrate that plenty of -OH, -COOH and -SO₃H moieties are generated on the surface of SBC during the sulfonation process. Due to high electronegativity and strong complexation of these moieties, SBC can rapidly adsorb Pb(II) and Cd(II) with capacities of 191.07 and 85.76 mg/g respectively within 5 min. SBC can be reused for 5 cycles with a negligible loss of adsorption capacity. In addition, different biomass-based biochars are prepared under the identical experimental conditions, and they are successfully applied in the treatments of Pb(II) and Cd(II). The satisfying results indicate that one-step low-temperature sulfonation could be a universal method, and various types of biomass waste could be the abundant, effective, economical material source for the treatment of environmental heavy metal pollution in future.

Properties and adsorption mechanism of magnetic biochar modified with molybdenum disulfide for cadmium in aqueous solution

In this paper, we present the preparation of MoS₂-modified magnetic biochar (MoS₂@MBC) as a novel adsorbent by a simple hydrothermal method. MoS₂@MBC contains abundant S-containing functional groups that facilitate efficient Cd(II) removal from aqueous systems. We employed various characterization techniques to explore the morphology, surface area, and chemical composition of MoS₂@MBC; these included Brunauer-Emmett-Teller analysis scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction,. The results indicated the successful decoration of the surface of MoS₂@MBC with iron and MoS₂, and a higher surface area of MoS₂@MBC than that of unmodified biochar. Moreover, adsorption properties including thermodynamics and kinetics were investigated along with the effects of pH, humic acid, and ionic strength on the Cd(II) adsorption onto MoS₂@MBC. The O-, C-, S-, and Fe-containing functional groups on the surface of MoS₂@MBC led to an electrostatic attraction of Cd(II) and strong Cd-S complexation. The Langmuir and pseudo second-order models fitted best for the batch adsorption experiments results. The adsorption capacity of MoS₂@MBC (139 mg g^-1 on the basis of the Langmuir model) was 7.81 times higher than that of pristine biochar. The adsorption process was found to be pH-dependent. The experimental results indicated that MoS₂@MBC is an effective adsorbent for removing Cd(II) from water solutions. Further, the adsorption process involved the complexation of Cd(II) with oxygen-based functional groups, ion exchange, electrostatic attraction, Cd(II)-π interactions, metal-sulfur complexation, and inner-surface complexation. This work provides new insights into the Cd(II) ions removal from water via adsorption. It also demonstrates that MoS₂@MBC is an efficient and economic adsorbent to treat Cd(II)-contaminated water.

Study on the Adsorption of CuFe2O4-Loaded Corncob Biochar for Pb(II)

A series of the magnetic CuFe2O4-loaded corncob biochar (CuFe2O4@CCBC) materials was obtained by combining the two-step impregnation of the corncob biochar with the pyrolysis of oxalate. CuFe2O4@CCBC and the pristine corncob biochar (CCBC) were characterized using XRD, SEM, VSM, BET, as well as pHZPC measurements. The results revealed that CuFe2O4 had a face-centered cubic crystalline phase and was homogeneously coated on the surface of CCBC. The as-prepared CuFe2O4@CCBC(5%) demonstrated a specific surface area of 74.98 m2·g-1, saturation magnetization of 5.75 emu·g-1 and pHZPC of 7.0. The adsorption dynamics and thermodynamic behavior of Pb(II) on CuFe2O4@CCBC and CCBC were investigated. The findings indicated that the pseudo-second kinetic and Langmuir equations suitably fitted the Pb(II) adsorption by CuFe2O4@CCBC or CCBC. At 30 °C and pH = 5.0, CuFe2O4@CCBC(5%) displayed an excellent performance in terms of the process rate and adsorption capacity towards Pb(II), for which the theoretical rate constant (k2) and maximum adsorption capacity (qm) were 7.68 × 10-3 g·mg-1··min-1 and 132.10 mg·g-1 separately, which were obviously higher than those of CCBC (4.38 × 10-3 g·mg-1·min-1 and 15.66 mg·g-1). The thermodynamic analyses exhibited that the adsorption reaction of the materials was endothermic and entropy-driven. The XPS and FTIR results revealed that the removal mechanism could be mainly attributed to the replacement of Pb2+ for H+ in Fe/Cu-OH and -COOH to form the inner surface complexes. Overall, the magnetic CuFe2O4-loaded biochar presents a high potential for use as an eco-friendly adsorbent to eliminate the heavy metals from the wastewater streams.

Magnetic porous NiLa-Layered double oxides (LDOs) with improved phosphate adsorption and antibacterial activity for treatment of secondary effluent

The removal of phosphate (nutrient) and E. coli (pathogen) from secondary effluent is of great importance to control the water quality of the receiving water bodies. In this study, magnetic porous NiLa-layered double oxides (NiLa-LDOs/Fe₃O₄) were synthesized using a simple co-precipitation method. NiLa-LDOs/Fe₃O₄ exhibited a high phosphate adsorption capacity of 203.10 mg g^-1 in batch adsorption experiments, which can mostly be maintained within the pH range (5.5-8.5) and ionic strength range (5-20 mM) of secondary effluent, and in the presence of commonly co-existing species (anions and organics). NiLa-LDOs/Fe₃O₄ were further evaluated in real secondary effluent and the homogenous surface diffusion model (HSDM) was used to predict the performance in field applications. Under typical conditions, NiLa-LDOs/Fe₃O₄ can last for ∼1845-2448 bed volumes (BVs) before the phosphate concentration in the effluent exceeds the monthly average limit of 1 mg L^-1 P. Good regeneration capacities were also demonstrated in cyclic adsorption-desorption runs in both synthetic solution and secondary effluent. In addition, the presence of Ni and La species greatly enhanced the antibacterial performance of the NiLa-LDOs/Fe₃O₄ toward E. coli. Results obtained from this study indicate porous NiLa-LDOs/Fe₃O₄ can be a promising multifunctional material for the treatment of secondary effluent.

Multifunctional magnetic MgMn-oxide composite for efficient purification of Cd2+ and paracetamol pollution: Synergetic effect and stability

A multifunctional magnetic composite (0.3Ma-MgMnLDO-a) with the function of Cd²⁺ adsorption and paracetamol (PAM) degradation was successfully fabricated. Surface morphology showed that Fe₃O₄ agglomeration was overcome on composite. The composite had high specific surface area of 105.32 m² g^-1 and saturation magnetization of 40 emu∙g^-1. 0.3Ma-MgMnLDO-a could reach Cd²⁺ adsorption equilibrium within 5 min with 99 % removal rate. The maximum adsorption capacity was 3.76 mmol·g^-1 (422.62 mg g^-1), which apparently higher than that of Fe₃O₄-a and MgMnLDO-a, indicating that the Fe/Mn synergism results in excellent ability for Cd²⁺ adsorption. Moreover, the composite could efficiently activate peroxymonosulfate (PMS) to rapid degrade PAM with the highest first-order rate constants (k_obs = 0.116 min^-1) and total organic carbon (TOC) removal rate (67.7 %), which also due to the contribution of Fe/Mn synergism in PMS activation. The cycling of Mn^III/Mn^IV and Fe^II/Fe^III played an important role in activating PMS to generateO₂^-•, ¹O₂ and OH for degradation. The composite exhibited both stable adsorption and catalytic performance on wide pH (3-9) and five reuse cycles. Notably, there was mutual promotion between Cd²⁺ and PAM adsorption, while the coexistence of Cd²⁺ had slight inhibition on PAM degradation. Overall, the magnetic composite had promising application for purifying heavy metals and pharmaceuticals.

Lead competition alters the zinc adsorption mechanism on animal-derived biochar

In this study, the adsorption behaviors and mechanisms of Pb(II) and Zn(II) by animal-derived biochar (ADB) in single and binary metal systems were comparatively investigated. ADB contains considerable amounts of Ca/P components and is mainly composed of hydroxyapatite (HAP), which plays an important role in the adsorption of Pb(II) and Zn(II). The maximum adsorption capacities of Pb(II) and Zn(II) on ADB were in the order of Zn(II)-single (3.23 mmol g^-1) > Pb(II)-single (2.74 mmol g^-1) ≈ Pb(II)-binary (2.71 mmol g^-1) > Zn(II)-binary (2.31 mmol g^-1). In the single metal system, approximately 99.9% of the adsorbed Pb(II) existed as Pb₅(PO₄)₃Cl, while the dominant adsorption mechanism of Zn(II) was cation exchange, followed by precipitation, accounting for 78.0%-80.6% and 19.4%-21.5% of the adsorption capacity, respectively. These findings were verified by X-ray diffraction refinement, X-ray photoelectron spectroscopy, metal speciation modeling, and Ca(II) exchange experiment. In the binary metal system, the proportion and form of Pb(II) precipitate remained unchanged. However, the binding of Zn(II) to ADB was completely dependent on the cation exchange with Ca(II), and no remarkable Zn(II) precipitation was observed. Phosphate released from HAP preferentially precipitated with Pb(II) than with Zn(II) when they coexisted. Consequently, Pb(II) competition may alter the Zn(II) adsorption mechanism on ADB. Nonetheless, ADB could serve as an efficient biochar for the simultaneous immobilization of Pb(II) and Zn(II) via different mechanisms.

Preparation, environmental application and prospect of biochar-supported metal nanoparticles: A review

Biochar is a low-cost, porous, and carbon-rich material and it exhibits a great potential as an adsorbent and a supporting matrix due to its high surface activity, high specific surface area, and high ion exchange capacity. Metal nanomaterials are nanometer-sized solid particles which have high reactivity, high surface area, and high surface energy. Owing to their aggregation and passivation, metal nanomaterials will lose excellent physiochemical properties. Carbon-enriched biochar can be applied to overcome these drawbacks of metal nanomaterials. Combining the advantages of biochar and metal nanomaterials, supporting metal nanomaterials on porous and stable biochar creates a new biochar-supported metal nanoparticles (MNPs@BC). Therefore, MNPs@BC can be used to design the properties of metal nanoparticles, stabilize the anchored metal nanoparticles, and facilitate the catalytic/redox reactions at the biochar-metal interfaces, which maximizes the efficiency of biochar and metal nanoparticles in environmental application. This work detailedly reviews the synthesis methods of MNPs@BC and the effects of preparation conditions on the properties of MNPs@BC during the preparation processes. The characterization methods of MNPs@BC, the removal/remediation performance of MNPs@BC for organic contaminants, heavy metals and other inorganic contaminants in water and soil, and the effect of MNPs@BC properties on the remediation efficiency were discussed. In addition, this paper summarizes the effect of various parameters on the removal of contaminants from water, the effect of MNPs@BC remediation on soil properties, and the removal/remediation mechanisms of the contaminants by MNPs@BC in water and soil. Moreover, the potential directions for future research and development of MNPs@BC have also been discussed.

Functional group-rich hyperbranched magnetic material for simultaneous efficient removal of heavy metal ions from aqueous solution

In order to achieve the purpose of simultaneous removal of coexisting heavy metal ions, in this work, functionalized magnetic mesoprous nanomaterials (Fe₃O₄-HBPA-ASA) with high density and multiple adsorption sites were designed and prepared. The obtained Fe₃O₄-HBPA-ASA was characterized by SEM, FTIR, VSM, TGA and zeta potential. Cu(II), Pb(II) and Cd(II) were chosen as the model heavy metal ions, the adsorption experiments showed that Fe₃O₄-HBPA-ASA showed hightheoretical adsorption capacitiesin individual system, and the maximum adsorption capacity was 136.66 mg/g, 88.36 mg/g and 165.46 mg/g, respectively. In the binary and ternary systems, the competitive adsorption leads to a decrease in the adsorption capacity of Cu(II), Pb(II) and Cd(II). However, in the ternary system with a concentration lower than 15 mg/L, the simultaneous removal rate was still higher than 90%. The adsorption isotherms and kineticswere well fitted by Langmuir and pseudo-second-order models, respectively. The XPS and density functional theory (DFT) analysis have confirmed that the adsorption of metal ions was related to various types of functional groups on the surface of Fe₃O₄-HBPA-ASA, while the adsorption mechanisms of Cu(II), Cd(II) and Pb(II) were different.

Magnetic biochar for environmental remediation: A review

The difficulty of separating the powdered biochar from the environmental medium may lead to secondary pollution and hinder the large-scale application of biochar as an adsorbent. An effective strategy to solve this bottleneck is to introduce transition metals and their oxides into the biochar matrix, creating easily separable magnetic biochar. Magnetic biochar is also effective for the removal of pollutants from aqueous solution. This review comprises a systematic analysis of 109 papers published in recent years (From 2011 to June 2019), and summarises the synthetic methods and raw materials required for magnetic biochar preparation. The basic physicochemical properties of magnetic biochar are expounded, together with findings from relevant studies, and the application of magnetic biochar as an adsorbent or catalyst in environmental remediation are summarised. Other applications of magnetic biochar are also discussed. Finally, some constructive suggestions are given for the future direction of magnetic biochar research.

Enhancing Cd(II) sorption by red mud with heat treatment: Performance and mechanisms of sorption

Red mud is a waste generated from the aluminum industry in large quantities. The potential of red mud as a sorbent for beneficial reuse has been the focus of research efforts. However, the limited sorption capacity of red mud has hindered its applications in the removal of environmental pollutants. In this study, the feasibility of heat treatment in improving the sorption of toxic Cd(II) by red mud was investigated in the temperature range of 200-900 °C. Heat treatment at 500 °C resulted in the highest sorption capacity (42.64 mg g^-1) and the fastest sorption rate. Further analyses revealed that heat treatment at 500 °C led to significant increases in specific surface area (32.77 m² g^-1), which likely contributed to the enhanced Cd(II) sorption performance. Notably, heat treatment at 500 °C nearly doubled Cd(II) sorption stability as compared with that of raw red mud, as demonstrated by leaching experiments with simulated rainwater. Sequential extraction and XPS analyses indicated that specific sorption was the predominant mechanism involved in Cd(II) removal by red mud heat-treated at 500 °C (RM500). The strength of specific sorption following heat treatment likely contributed to the increase in sorption stability due to the formation of inner-sphere complex (-OCdOH). Metal-metal ion exchange was identified as another sorption mechanism, which, however, likely had only a limited effect on Cd(II) sorption performance. As the final pH (6.57) of the sorption system was typically lower than the pH_PZC (about 10.6) of RM500, positive charges would develop on the red mud surface and impede the retention of Cd(II) cations, resulting in weak electrostatic attraction between Cd(II) cations and red mud. In summary, heat treatment at 500 °C considerably enhanced the capacity, rate and stability of Cd(II) sorption by red mud, suggesting red mud could be optimized by heat treatment as a more effective sorbent for Cd(II) removal. These findings represent the first mechanistic characterization of Cd(II) sorption by heat-treated red mud, providing much needed insights into the potential strategies to enhance the effectiveness of red mud in the sorptive removal of toxic heavy metals.

Biochar derived from corn stalk and polyethylene co-pyrolysis: characterization and Pb(ii) removal potential

Biochar is widely used as adsorbents for gaseous or liquid pollutants due to its special pore structure.

Efficient removal of lead ions from aqueous solutions using ZnSe/ZnO/Bio-CaCO3

The sheet-like adsorbent of the eggshell wastes was prepared by the thermal hydrolysis method. The structure of the adsorbent was characterized by scanning electron microscope, Brunauer-Emmett-Teller, X-ray diffraction, transmission electron microscope, and X-ray photoelectron spectrometer. The adsorption capacity was investigated in a Pb²⁺ solution. The effects of initial pH, salt concentration, contact time, and adsorbate concentration on the adsorption of lead ions were investigated in detail. The morphology of the adsorbent was sheet-like microspheres. Zinc selenide/zinc oxide could be uniformly loaded onto the eggshell waste surface, which could effectively enhance the specific surface area of the eggshell wastes. The adsorption kinetics and isotherm followed the pseudo-second-order and Langmuir-Freundlich isotherm model, respectively. The synthesized adsorbent showed a maximum lead adsorption capacity of 1,428.78 mg/g at room temperature. Ion-exchange was the main adsorption mechanism.

Preparation of NH2-Functionalized Fe2O3 and Its Chitosan Composites for the Removal of Heavy Metal Ions

NH2-Fe2O3 and NH2-Fe2O3/chitosan (NH2-Fe2O3/CS) with excellent physical properties and high adsorption capacities for several heavy metal ions were synthesized using a one-pot hydrothermal method. The materials were characterized by scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Physicochemical properties were determined by the Fourier transform infrared spectra (FTIR) and nitrogen adsorption analysis (Brunauer–Emmett–Teller (BET) method). The results of the characterization studies show that the material is uniformly dispersed and has good crystallinity and well-defined porous particles. The material is mesoporous, and the particles have a specific surface area of 55.41–233.03 m2·g−1, a total pore volume of 0.24–0.54 cm3·g−1, and a diameter of 3.83–17.56 nm. Additional results demonstrate that NH2-Fe2O3 and NH2-Fe2O3/CS are effective adsorbents for the removal of heavy metal ions from solution. In a ternary system, the order of their selective adsorption was determined to be Pb(II) > Cu(II) > Cd(II), and the adsorption rate of Pb(II) was much higher than that of Cu(II) and Cd (II). The metal ion adsorption capacity of NH2-Fe2O3 and NH2-Fe2O3/CS makes them promising adsorbents for wastewater cleanup.

Sorption of carbendazim on activated carbons derived from rape straw and its mechanism

Due to the production and widespread application of pesticides, pesticide pollution poses a potential danger to human health and the ecosystem. Herein, activated carbons employing rape straw as a precursor were produced using H₃PO₄ as an activating agent at various temperatures (300–600 °C). The activated carbons differed with respect to the physicochemical properties, which were derived from elemental analysis, N₂ sorption–desorption, FTIR, XPS, XRD, pH_pzc, Boehm titration and blocking of the oxygen-containing groups. The oxygen-containing functional groups and the pore structure of the activated carbons obtained from the different preparation conditions were quite different. The as-prepared samples were applied as sorbents to remove carbendazim (CBD). The results indicated that the sorption of CBD was mainly dominated by partitioning at low concentrations of CBD. Meanwhile, electrostatic attractions played a more important role than hydrophobic interactions at a low initial pH; in contrast, as the initial pH increased, the hydrophobic interaction was the predominant sorption mechanism. Therefore, the results can be used to design some efficient and environmentally friendly adsorbents to reduce the risk of organic pollutants, especially organic pesticides, in aqueous solutions.

Due to the production and widespread application of pesticides, pesticide pollution poses a potential danger to human health and the ecosystem.

Novel magnetically separable anhydride-functionalized Fe3O4@SiO2@PEI-NTDA nanoparticles as effective adsorbents: synthesis, stability and recyclable adsorption performance for heavy metal ions

In this paper, a novel adsorbent, Fe₃O₄@SiO₂@PEI-NTDA, was first prepared by the immobilization of an amine and anhydride onto magnetic Fe₃O₄@SiO₂ nanoparticles with polyethylenimine (PEI) and 1,4,5,8-naphthalenetetracarboxylic-dianhydride (NTDA) for the removal of heavy metal ions from aqueous solutions. The structure of Fe₃O₄@SiO₂@PEI-NTDA was systematically investigated; the results confirmed that amine and anhydride groups were successfully covalently grafted onto the surface of Fe₃O₄@SiO₂, which showed a homogenous core–shell structure with three layers of about 300 nm diameter (Fe₃O₄ core: 200 nm, nSiO₂ layer: 20 nm, and PEI-NTDA layer: 20 nm). The adsorption performance of Fe₃O₄@SiO₂@PEI-NTDA NPs was evaluated for single Pb²⁺ and coexisting Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions in an aqueous solution in a batch system. The amine and anhydride groups may have a synergistic effect on Pb²⁺ removal through electrostatic interactions and chelation; Fe₃O₄@SiO₂@PEI-NTDA NPs exhibited preferable removal of Pb²⁺ with maximum adsorption capacity of 285.3 mg g⁻¹ for Pb²⁺ at a solution pH of 6.0, adsorbent dosage of 0.5 g L⁻¹, initial Pb²⁺ concentration of 200 mg L⁻¹ and contact time of 3 h. The adsorption mechanism conformed well to the Langmuir isotherm model, and the adsorption kinetic data were found to fit the pseudo-second order model. Fe₃O₄@SiO₂@PEI-NTDA NPs could be recovered easily from their dispersion by an external magnetic field and demonstrated good recyclability and reusability for at least 6 cycles with a high adsorption capacity above 204.5 mg g⁻¹. The magnetic adsorbents showed high stability with a weight loss below 0.65% in the acid leaching treatment by 2 M HCl solution for 144 h. This study indicates that Fe₃O₄@SiO₂@PEI-NTDA NPs are new promising adsorbents for the effective removal of Pb²⁺ in wastewater treatment.

A magnetically separable adsorbent, anhydride-functionalized Fe₃O₄@SiO₂@PEI-NTDA, was successfully constructed for removal of heavy metal ions from aqueous solution.