Phenotyping from lab to field - tomato lines screened for heat stress using Fv/Fm maintain high fruit yield during thermal stress in the field

Intraspecific variation in responses to extreme and moderate temperature stress in the wild species, Solanum carolinense (Solanaceae)

Adaptation or acclimation to local temperature regimes has often been used as a proxy for predicting how plant populations will respond to impending novel conditions driven by human-caused climate change. To understand how plants may successfully respond to increasing air temperatures (extreme and moderate) in the future, we explored how temperature tolerance traits differ in populations of Solanum carolinense from northern (MN) and southern (TX) regions of the continental USA in a two-experiment study. In the first experiment, we compared the heat and cold tolerance in vegetative (sporophyte) and reproductive (male gametophyte) traits. In the second experiment, we studied if long-term heat influences plant development by examining how development in moderate heat affected reproductive structures and reproductive success. We found that temperature sensitivity differed between southern populations, which regularly experience extreme heat, and northern populations which do not. In contrast to our expectations, northern populations appeared more heat-tolerant than southern populations for vegetative traits such as chlorophyll stability and reproductive traits such as pollen germination. Our results are consistent with a heat-avoidance, rather than tolerance mechanism to mitigate extreme heat during pollen germination. In the second experiment, plants developing under the moderate heat treatment had significantly smaller reproductive structures and reduced seed production (27% fewer seeds on average than in the control treatment). Reproductive structures that developed in moderate heat were also reduced in size, particularly in the northern populations relative to populations from the south. We conclude that rising temperatures have the potential to incur substantial negative consequences for the reproductive success of individuals in this species and that some populations already mitigate stressful temperature conditions through phenotypic plasticity.

Adding value to banana farming: Antibody production in post-harvest leaves

Banana, a globally popular fruit, is widely cultivated in tropical and sub-tropical regions. After fruit harvest, remaining banana plant materials are low-value byproducts, mostly composted or used as fibre or for food packaging. As an aim to potentially increase farmer income, this study explored underutilised banana biomass as a novel plant tissue for production of a high-value product. Protein scFvTG130 used in this study, is an anti-toxoplasma single chain variable fragment antibody that can be used in diagnostics and neutralising the Toxoplasma gondii pathogen. Using detached banana leaves, we investigated the factors influencing the efficacy of a transient expression system using reporter genes and recombinant protein, scFvTG130. Transient expression was optimal at 2 days after detached banana leaves were vacuum infiltrated at 0.08 MPa vacuum pressure for a duration of 3 min with 0.01% (v/v) Tween20 using Agrobacterium strain GV3101 harbouring disarmed virus-based vector pIR-GFPscFvTG130. The highest concentration of anti-toxoplasma scFvTG130 antibody obtained using detached banana leaves was 22.8 µg/g fresh leaf tissue. This first study using detached banana leaf tissue for the transient expression of a recombinant protein, successfully demonstrated anti-toxoplasma scFvTG130 antibody expression, supporting the potential application for other related proteins using an underutilised detached banana leaf tissue.

Deleterious Effects of Heat Stress on the Tomato, Its Innate Responses, and Potential Preventive Strategies in the Realm of Emerging Technologies

The tomato is a fruit vegetable rich in nutritional and medicinal value grown in greenhouses and fields worldwide. It is severely sensitive to heat stress, which frequently occurs with rising global warming. Predictions indicate a 0.2 °C increase in average surface temperatures per decade for the next three decades, which underlines the threat of austere heat stress in the future. Previous studies have reported that heat stress adversely affects tomato growth, limits nutrient availability, hammers photosynthesis, disrupts reproduction, denatures proteins, upsets signaling pathways, and damages cell membranes. The overproduction of reactive oxygen species in response to heat stress is toxic to tomato plants. The negative consequences of heat stress on the tomato have been the focus of much investigation, resulting in the emergence of several therapeutic interventions. However, a considerable distance remains to be covered to develop tomato varieties that are tolerant to current heat stress and durable in the perspective of increasing global warming. This current review provides a critical analysis of the heat stress consequences on the tomato in the context of global warming, its innate response to heat stress, and the elucidation of domains characterized by a scarcity of knowledge, along with potential avenues for enhancing sustainable tolerance against heat stress through the involvement of diverse advanced technologies. The particular mechanism underlying thermotolerance remains indeterminate and requires further elucidatory investigation. The precise roles and interplay of signaling pathways in response to heat stress remain unresolved. The etiology of tomato plants' physiological and molecular responses against heat stress remains unexplained. Utilizing modern functional genomics techniques, including transcriptomics, proteomics, and metabolomics, can assist in identifying potential candidate proteins, metabolites, genes, gene networks, and signaling pathways contributing to tomato stress tolerance. Improving tomato tolerance against heat stress urges a comprehensive and combined strategy including modern techniques, the latest apparatuses, speedy breeding, physiology, and molecular markers to regulate their physiological, molecular, and biochemical reactions.

Plant responses to co-occurring heat and water deficit stress: A comparative study of tolerance mechanisms in old and modern wheat genotypes

Global climate change increases the likelihood of co-occurrence of hot and dry spells with increased intensity, frequency, and duration. Studying the impact of the two stresses provide a better understanding of tolerance mechanisms in wheat, and our study was focused on revealing plant stress responses to different severities of combined stress at two phenophases in old and modern wheat genotypes. During the stem elongation and anthesis stages, plants were exposed to four treatments: control, deficit irrigation, combined heat, and deficit irrigation at 31 °C (HD31) and 37 °C (HD37). The modern genotypes were less affected by deficit irrigation at stem elongation as they maintained higher photosynthesis, stomatal conductance, and leaf cooling than old genotypes. When the HD37 stress was imposed during anthesis, the modern genotypes exhibited superior performance compared to the old, which was due to their higher photosynthetic rates resulting from improved biochemical regulation and a higher chlorophyll content. The plant responses varied during two phenophases under the combined stress exposure. Genotypes subjected to HD37 stress during stem elongation, photosynthesis was mainly controlled by stomatal regulation, whereas at anthesis it was predominated by biochemical regulation. These findings contribute to a deeper comprehension of plant tolerance mechanisms in response to different intensities of co-occurring hot and dry weather conditions.

Stomatal effects and ABA metabolism mediate differential regulation of leaf and flower cooling in tomato cultivars exposed to heat and drought stress

Co-occurring heat and drought stresses challenge crop performance. Stomata open to promote evaporative cooling during heat stress, but close to retain water during drought stress, which resulted in complex stomatal regulation under combined heat and drought. We aimed to investigate stomatal regulation in leaves and flowers of perennial, indeterminate cultivars of tomatoes subjected to individual and combined heat and drought stress followed by a recovery period, measuring morphological, physiological, and biochemical factors involved in stomatal regulation. Under stress, stomata of leaves were predominantly affected by drought, with lower stomatal density and stomatal closing, resulting in significantly decreased photosynthesis and higher leaf temperature. Conversely, stomata in sepals seemed affected mainly by heat during stress. The differential patterns in stomatal regulation in leaves and flowers persisted into the recovery phase as contrasting patterns in stomatal density. We show that flower transpiration is regulated by temperature, but leaf transpiration is regulated by soil water availability during stress. Organ-specific patterns of stomatal development and abscisic acid metabolism mediated this phenomenon. Our results throw light on the dual role of stomata in heat and drought tolerance of vegetative and generative organs, and demonstrate the importance of considering flower surfaces in the phenotyping of stomatal reactions to stress.

The Promising B-Type Response Regulator hst1 Gene Provides Multiple High Temperature and Drought Stress Tolerance in Rice

High temperatures, drought, and salt stresses severely inhibit plant growth and production due to the effects of climate change. The Arabidopsis ARR1, ARR10, and ARR12 genes were identified as negative salt and drought stress regulators. However, in rice, the tolerance capacity of the hst1 gene, which is orthologous to the ARR1, ARR10, and ARR12 genes, to drought and multiple high temperature and drought stresses remains unknown. At the seedling and reproductive stages, we investigated the drought (DS) high temperature (HT) and multiple high temperature and drought stress (HT+DS) tolerance capacity of the YNU31-2-4 (YNU) genotype, which carries the hst1 gene, and its nearest genomic relative Sister Line (SL), which has a 99% identical genome without the hst1 gene. At the seedling stage, YNU demonstrated greater growth, photosynthesis, antioxidant enzyme activity, and decreased ROS accumulation under multiple HT+DS conditions. The YNU genotype also demonstrated improved yield potential and grain quality due to higher antioxidant enzyme activity and lower ROS generation throughout the reproductive stage under multiple HT+DS settings. Furthermore, for the first time, we discovered that the B-type response regulator hst1 gene controls ROS generation and antioxidant enzyme activities by regulating upstream and downstream genes to overcome yield reduction under multiple high temperatures and drought stress. This insight will help us to better understand the mechanisms of high temperature and drought stress tolerance in rice, as well as the evolution of tolerant crops that can survive increased salinity to provide food security during climate change.

Heat and salinity stress on the African eggplant F1 Djamba, a Kumba cultivar

Climate change is expected to increase soil salinity and heat-wave intensity, duration, and frequency. These stresses, often present in combination, threaten food security as most common crops do not tolerate them. The African eggplant (Solanum aethiopicum L.) is a nutritious traditional crop found in sub-Saharan Africa and adapted to local environments. Its wider use is, however, hindered by the lack of research on its tolerance. This project aimed to describe the effects of salinity (100 mM NaCl solution) combined with elevated temperatures (27/21°C, 37/31°C, and 42/36°C). High temperatures reduced leaf biomass while cell membrane stability was reduced by salinity. Chlorophyll levels were boosted by salinity only at the start of the stress with only the different temperatures significantly impacted the levels at the end of the experiment. Other fluorescence parameters such as maximum quantum yield and non-photochemical quenching were only affected by the temperature change. Total antioxidants were unchanged by either stress despite a decrease of phenols at the highest temperature. Leaf sodium concentration was highly increased by salinity but phosphorus and calcium were unchanged by this stress. These findings shed new light on the tolerance mechanisms of the African eggplant under salinity and heat. Further research on later developmental stages is needed to understand its potential in the field in areas affected by these abiotic stresses.

Evaluating the physiological responses and identifying stress tolerance of Akabare chili landraces to individual and combined drought and heat stresses

Abstract. Akabare chili (Capsicum annuum) contributes to Nepalese rural livelihoods but suffers from low productivity due to various abiotic stresses including drought and heat. This study aimed to assess the physiological responses of Akabare chili landraces to heat and drought stress, individually and together, and to identify stress-tolerant genotypes in the early vegetative stage. Selected eight Akabare chili landraces and chili variety 'Jwala' were subjected to control (30/22 °C day/night) and heat stress (40/32 °C) conditions with irrigation, and drought stress (30/22 °C) and combined drought-heat stress conditions without irrigation for 7 days, followed by a 5-day recovery under control condition. Stress-tolerant landraces showed better performance compared to sensitive ones in terms of efficacy of PS II (Fv/Fm), transpiration rate (E), net photosynthetic rate (PN), stomatal conductance (gs), leaf temperature depression, water use efficiency (WUE) and the ratio of stomata pore area to stomata area under stress conditions, resulting in improved biomass. Although all genotypes performed statistically similar under control conditions, their responses Fv/Fm, PN, E, gs and WUE were significantly reduced under thermal stress, further reduced under drought stress, and severely declined under the combination of both. Total biomass exhibited a 57.48 % reduction due to combined stress, followed by drought (37.8 %) and heat (21.4 %) compared to the control. Among the landraces, C44 showed the most significant gain in biomass (35 %), followed by DKT77 (33.48 %), while the lowest gain percentage was observed for C64C and PPR77 during the recovery phase (29 %). The tolerant landraces also showed a higher percentage of leaf cooling, chlorophyll content and leaf relative water content with fewer stomata but broader openings of pores. The study identifies potential stress-tolerant Akabare chili landraces and discusses the stress-tolerant physiological mechanisms to develop resilient crop varieties in changing climates.

Development of Modified Farquhar-von Caemmerer-Berry Model Describing Photodamage of Photosynthetic Electron Transport in C3 Plants under Different Temperatures

Photodamage of photosynthetic electron transport is a key mechanism of disruption of photosynthesis in plants under action of stressors. This means that investigation of photodamage is an important task for basic and applied investigations. However, its complex mechanisms restrict using experimental methods of investigation for this process; the development of mathematical models of photodamage and model-based analysis can be used for overcoming these restrictions. In the current work, we developed the modified Farquhar-von Caemmerer-Berry model which describes photodamage of photosynthetic electron transport in C3 plants. This model was parameterized on the basis of experimental results (using an example of pea plants). Analysis of the model showed that combined inactivation of linear electron flow and Rubisco could induce both increasing and decreasing photodamage at different magnitudes of inactivation of these processes. Simulation of photodamage under different temperatures and light intensities showed that simulated temperature dependences could be multi-phase; particularly, paradoxical increases in the thermal tolerance of photosynthetic electron transport could be observed under high temperatures (37-42 °C). Finally, it was shown that changes in temperature optimums of linear electron flow and Rubisco could modify temperature dependences of the final activity of photosynthetic electron transport under photodamage induction; however, these changes mainly stimulated its photodamage. Thus, our work provides a new theoretical tool for investigation of photodamage of photosynthetic processes in C3 plants and shows that this photodamage can be intricately dependent on parameters of changes in activities of linear electron flow and Rubisco including changes induced by temperature.

Genetic analysis of heat tolerance in hot pepper: insights from comprehensive phenotyping and QTL mapping

High temperatures present a formidable challenge to the cultivation of hot pepper, profoundly impacting not only vegetative growth but also leading to flower and fruit abscission, thereby causing a significant reduction in yield. To unravel the intricate genetic mechanisms governing heat tolerance in hot pepper, an F2 population was developed through the crossing of two distinct genotypes exhibiting contrasting heat tolerance characteristics: DLS-161-1 (heat tolerant) and DChBL-240 (heat susceptible). The F2 population, along with the parental lines, was subjected to comprehensive phenotyping encompassing diverse morphological, physiological, and biochemical heat-related traits under high temperature conditions (with maximum temperature ranging from 31 to 46.5°C and minimum temperature from 15.4 to 30.5°C). Leveraging the Illumina Nova Seq-6000 platform, Double digest restriction-site associated DNA sequencing (ddRAD-seq) was employed to generate 67.215 Gb data, with subsequent alignment of 218.93 million processed reads against the reference genome of Capsicum annuum. Subsequent variant calling and ordering resulted in 5806 polymorphic SNP markers grouped into 12 LGs. Further QTL analysis identified 64 QTLs with LOD values ranging from 2.517 to 11.170 and explained phenotypic variance ranging from 4.05 to 19.39%. Among them, 21 QTLs, explaining more than 10% phenotypic variance, were identified as major QTLs controlling 9 morphological, 3 physiological, and 2 biochemical traits. Interestingly, several QTLs governing distinct parameters were found to be colocalized, suggesting either a profound correlation between the QTLs regulating these traits or their significant genomic proximity. In addition to the QTLs, we also identified 368380 SSR loci within the identified QTL regions, dinucleotides being the most abundant type (211,381). These findings provide valuable insights into the genetics of heat tolerance in hot peppers. The identified QTLs and SSR markers offer opportunities to develop heat-tolerant varieties, ensuring better crop performance under high-temperature conditions.

Pitfalls and potential of high-throughput plant phenotyping platforms

Automated high-throughput plant phenotyping (HTPP) enables non-invasive, fast and standardized evaluations of a large number of plants for size, development, and certain physiological variables. Many research groups recognize the potential of HTPP and have made significant investments in HTPP infrastructure, or are considering doing so. To make optimal use of limited resources, it is important to plan and use these facilities prudently and to interpret the results carefully. Here we present a number of points that users should consider before purchasing, building or utilizing such equipment. They relate to (1) the financial and time investment for acquisition, operation, and maintenance, (2) the constraints associated with such machines in terms of flexibility and growth conditions, (3) the pros and cons of frequent non-destructive measurements, (4) the level of information provided by proxy traits, and (5) the utilization of calibration curves. Using data from an Arabidopsis experiment, we demonstrate how diurnal changes in leaf angle can impact plant size estimates from top-view cameras, causing deviations of more than 20% over the day. Growth analysis data from another rosette species showed that there was a curvilinear relationship between total and projected leaf area. Neglecting this curvilinearity resulted in linear calibration curves that, although having a high r2 (> 0.92), also exhibited large relative errors. Another important consideration we discussed is the frequency at which calibration curves need to be generated and whether different treatments, seasons, or genotypes require distinct calibration curves. In conclusion, HTPP systems have become a valuable addition to the toolbox of plant biologists, provided that these systems are tailored to the research questions of interest, and users are aware of both the possible pitfalls and potential involved.

Artificial neural network (ANN)-based algorithms for high light stress phenotyping of tomato genotypes using chlorophyll fluorescence features

High light (HL) is a common environmental stress directly imposes photoinhibition on the photosynthesis apparatus. Breeding plants for tolerance against HL is therefore highly demanded. Chlorophyll fluorescence (ChlF) is a sensitive indicator of stress in plants and can be evaluated using OJIP transients. In this study, we compared the ChlF features of plants exposed to HL (1200 μmol m-2 s-1) with that of control plants (300 μmol m-2 s-1). To extract the most reliable ChlF features for discrimination between HL-stressed and non-stressed plants, we applied three artificial neural network (ANN)-based algorithms, namely, Boruta, Support Vector Machine (SVM), and Recursive Feature Elimination (RFE). Feature selection algorithms identified multiple features but only two features, namely the maximal quantum yield of PSII photochemistry (FV/FM) and quantum yield of energy dissipation (ɸD0), remained consistent across all genotypes in control conditions, while exhibited variation in HL. Therefore, considered reliable features for HL stress screening. The selected features were then used for screening 14 tomato genotypes for HL. Genotypes were categorized into three groups, tolerant, semi-tolerant, and sensitive genotypes. Foliar hydrogen peroxide (H2O2) and malondialdehyde (MDA) contents were measured as independent proxies for benchmarking selected features. Tolerant genotypes were attributed with the lowest change in H2O2 and MDA contents, while the sensitive genotypes displayed the highest magnitude of increase in H2O2 and MDA by HL treatment compared to the control. Finally, a FV/FM higher than 0.77 and ɸD0 lower than 0.24 indicates a healthy electron transfer chain (ETC) when tomato plants are exposed to HL.

Sensibility, multiple tolerance and degradation capacity of forest species to sequential contamination of herbicides in groundwaters

Herbicides have already reported environmental contamination in several countries with intense agricultural activity. The transport of these molecules due to leaching and surface runoff has frequently caused contamination of rivers, groundwater and soil in non-agricultural areas. Thereby, we propose to investigate the sensitivity and phytoremediation capacity of 5 native Cerrado species to sequential exposure to 2,4-D, atrazine, diuron and hexazinone. We hypothesized that species have different sensitivity levels to sequential exposure to these herbicides absorbed from contaminated simulated groundwater model. The objectives of this work were: i) to determine the sensitivity of native cerrado species by sequential exposure to 2,4-D, atrazine, diuron and hexazinone via contaminated simulated groundwater model; ii) to evaluate the presence and degradation capacity of these herbicides in the soil and water leached by tolerant species. Some species showed high phytoremediation potential for groundwater already contaminated with 2,4-D, atrazine, diuron and hexazinone. S. macranthera and C. antiphilitica are tolerant and reduce the concentration of herbicides in simulated groundwater model. Among these species, C. antiphilitica reduces the concentration of all herbicides, suggesting greater adaptability to compose decontamination strategies in areas close to agricultural systems that use 2,4-D herbicides, atrazine, diuron and hexazinone. Also, our results show that herbicides can act as a selection factor for Cerrado forest species, however, two species can mitigate the effects of contamination due to their ability to degrade herbicides.

The Chlorophyll Fluorescence Parameter Fv/Fm Correlates with Loss of Grain Yield after Severe Drought in Three Wheat Genotypes Grown at Two CO2 Concentrations

Three genotypes of wheat grown at two CO₂ concentrations were used in a drought experiment, where water was withheld from the pots at anthesis until stomatal conductance (g_s) dropped below 10% of the control and photosynthesis (A) approached zero. The genotypes had different leaf area (Gladius < LM19 < LM62) and while photosynthesis and shoot growth were boosted by elevated CO₂, the water use and drying rate were more determined by canopy size than by stomatal density and conductance. The genotypes responded differently regarding number of fertile tillers, seeds per spike and 1000 kernel weight and, surprisingly, the largest genotype (LM62) with high water use showed the lowest relative decrease in grain yield. The maximum photochemical efficiency of photosystem II (F_v/F_m) was only affected on the last day of the drought when the stomata were almost closed although some variation in A was still seen between the genotypes. A close correlation was found between F_v/F_m and % loss of grain yield. It indicates that the precise final physiological stress level measured by F_v/F_m at anthesis/early kernel filling could effectively predict percentage final yield loss, and LM62 was slightly less stressed than the other genotypes, due to only a small discrepancy in finalising the drying period. Therefore, F_v/F_m can be used as a proxy for estimating the yield performance of wheat after severe drought at anthesis.

SlIAA9 Mutation Maintains Photosynthetic Capabilities under Heat-Stress Conditions

Tomato is one of the most widely consumed horticultural products. However, tomato is very sensitive to changes in temperature. Daily average temperatures above 32 °C severely reduced tomato plant growth, development, and productivity. Therefore, climate change-induced global warming is a major threat to future tomato production. Good photosynthetic capability under heat stress conditions is known to be a major sign of heat tolerance. Tomato INDOLE-ACETIC-ACID (SlIAA9) is a transcriptional repressor in auxin signaling. SlIAA9 mutation caused heightened endogenous auxin response and biosynthesis within plant tissues. In this study, we studied the photosynthetic capability of iaa9-3 and iaa9-5 mutants under heat-stress conditions. We discovered that both iaa9-3 and iaa9-5 could maintain their photosynthetic capability after 14 days of heat treatment (>40 °C), differing from Wild Type-Micro-Tom (WT-MT) tomato. Both iaa9 mutants had higher net photosynthetic rate, stomatal conductance, leaf total chlorophyll, leaf carotenoids, Fv/Fm value, and lower leaf MDA than WT-MT. These results suggested that the SlIAA9 mutation benefits plant adaptation to heat stress.

Exogenous spermidine enhances the photosynthetic and antioxidant capacity of citrus seedlings under high temperature

Studies have not fully explained the underlying mechanism of spermidine-mediated heat tolerance. This study investigated the possible role of spermidine (Spd) in regulating citrus heat tolerance. The results showed that exogenous Spd effectively alleviated the limitation of high temperature (HT) on photosynthesis. Exogenous Spd increased the chlorophyll content, net photosynthetic rate, intercellular carbon dioxide concentration, stomatal conductance, maximum and effective quantum yield of PSII photochemistry, nonphotochemical quenching coefficient, and electron transport rate in citrus seedlings under HT stress, but declined the stomatal limitation value. In addition, Spd treatment promoted the dynamic balance of the citrus enzymatic and non-enzymatic antioxidants system. Spd application significantly increased the activity of superoxide dismutase, peroxidase, catalase, ascorbic acid, and glutathione and the expression level of corresponding genes at high temperature, while reducing the content of H2O2 and malondialdehyde. Therefore, our findings suggested exogenous Spd significantly ameliorated citrus physiological and photosynthetic adaptation under HT stress, thereby providing helpful guidance for citrus cultivation in HT events.

Proximal and remote sensing in plant phenomics: 20 years of progress, challenges, and perspectives

Plant phenomics (PP) has been recognized as a bottleneck in studying the interactions of genomics and environment on plants, limiting the progress of smart breeding and precise cultivation. High-throughput plant phenotyping is challenging owing to the spatio-temporal dynamics of traits. Proximal and remote sensing (PRS) techniques are increasingly used for plant phenotyping because of their advantages in multi-dimensional data acquisition and analysis. Substantial progress of PRS applications in PP has been observed over the last two decades and is analyzed here from an interdisciplinary perspective based on 2972 publications. This progress covers most aspects of PRS application in PP, including patterns of global spatial distribution and temporal dynamics, specific PRS technologies, phenotypic research fields, working environments, species, and traits. Subsequently, we demonstrate how to link PRS to multi-omics studies, including how to achieve multi-dimensional PRS data acquisition and processing, how to systematically integrate all kinds of phenotypic information and derive phenotypic knowledge with biological significance, and how to link PP to multi-omics association analysis. Finally, we identify three future perspectives for PRS-based PP: (1) strengthening the spatial and temporal consistency of PRS data, (2) exploring novel phenotypic traits, and (3) facilitating multi-omics communication.

Plant responses to high temperature and drought: A bibliometrics analysis

Global climate change is expected to further increase the frequency and severity of extreme events, such as high temperature/heat waves as well as drought in the future. Thus, how plant responds to high temperature and drought has become a key research topic. In this study, we extracted data from Web of Science Core Collections database, and synthesized plant responses to high temperature and drought based on bibliometric methods using software of R and VOSviewer. The results showed that a stabilized increasing trend of the publications (1199 papers) was found during the period of 2008 to 2014, and then showed a rapid increase (2583 papers) from year 2015 to 2021. Secondly, the top five dominant research fields of plant responses to high temperature and drought were Plant Science, Agroforestry Science, Environmental Science, Biochemistry, and Molecular Biology, respectively. The largest amount of published article has been found in the Frontiers in Plant Science journal, which has the highest global total citations and H-index. We also found that the journal of Plant Physiology has the highest local citations. From the most cited papers and references, the most important research focus was the improvement of crop yield and vegetation stress resistance. Furthermore, "drought" has been the most prominent keyword over the last 14 years, and more attention has been paid to "climate change" over the last 5 years. Under future climate change, how to regulate growth and development of food crops subjected to high temperature and drought stress may become a hotspot, and increasing research is critical to provide more insights into plant responses to high temperature and drought by linking plant above-below ground components. To summarize, this research will contribute to a comprehensive understanding of the past, present, and future research on plant responses to high temperature and drought.

Phenotyping methods to assess heat stress resilience in grapevine

Global warming has become an issue in recent years in viticulture, as increasing temperatures have a negative impact on grapevine (Vitis vinifera) production and on wine quality. Phenotyping for grapevine response to heat stress is, therefore, important to understand thermotolerance mechanisms, with the aim of improving field management strategies or developing more resilient varieties. Nonetheless, the choice of the phenotypic traits to be investigated is not trivial and depends mainly on the objectives of the study, but also on the number of samples and on the availability of instrumentation. Moreover, the grapevine literature reports few studies related to thermotolerance, generally assessing physiological responses, which highlights the need for more holistic approaches. In this context, the present review offers an overview of target traits that are commonly investigated in plant thermotolerance studies, with a special focus on grapevine, and of methods that can be employed to evaluate those traits. With the final goal of providing useful tools and references for future studies on grapevine heat stress resilience, advantages and limitations of each method are highlighted, and the available or possible implementations are described. In this way, the reader is guided in the choice of the best approaches in terms of speed, complexity, range of application, sensitivity, and specificity.

High-resolution dissection of photosystem II electron transport reveals differential response to water deficit and heat stress in isolation and combination in pearl millet [Pennisetum glaucum (L.) R. Br.]

Heat and Water Deficit Stress (WDS) tend to impede and restrict the efficiency of photosynthesis, chlorophyll fluorescence, and maximum photochemical quantum yield in plants based on their characteristic ability to interfere with the electron transport system in photosystem II. Dissection of the electron transport pathway in Photosystem II (PSII) under water deficit and Heat Stress (HS) can be insightful in gaining knowledge on the various attributes of the photosynthetic performance of a plant. We attempt a high-resolution dissection of electron transport in PSII with studies on chlorophyll a fast fluorescence kinetics and non-photochemical quenching (NPQ) as a response to and recovery from these stresses in pearl millet [Pennisetum glaucum (L.) R. Br.] in isolation and combination. In this study, we bring out the mechanisms by which both heat and water stress, in isolation and in combination, affect the photosynthetic electron transport in Photosystem II. Our results indicate that oxygen evolution complex (OEC) damage is the primary effect of heat stress and is not seen with the same intensity in the water-stressed plants. Low exciton absorption flux in heat stress and combined stress was seen due to OEC damage, and this caused an electron transport traffic jam in the donor side of PS II. Both the specific energy flux model and the phenomenological flux model developed from the derived values in our study show that water deficit stress in combination with heat stress has a much stronger effect than the stresses in isolation on the overall electron transport pathway of the PS II in pearl millet plants.

Discovering Tolerance—A Computational Approach to Assess Abiotic Stress Tolerance in Tomato Under Greenhouse Conditions

Modern plant cultivars often possess superior growth characteristics, but within a limited range of environmental conditions. Due to climate change, crops will be exposed to distressing abiotic conditions more often in the future, out of which heat stress is used as example for this study. To support identification of tolerant germplasm and advance screening techniques by a novel multivariate evaluation method, a diversity panel of 14 tomato genotypes, comprising Mediterranean landraces of Solanum lycopersicum, the cultivar “Moneymaker” and Solanum pennellii LA0716, which served as internal references, was assessed toward their tolerance against long-term heat stress. After 5 weeks of growth, young tomato plants were exposed to either control (22/18°C) or heat stress (35/25°C) conditions for 2 weeks. Within this period, water consumption, leaf angles and leaf color were determined. Additionally, gas exchange and leaf temperature were investigated. Finally, biomass traits were recorded. The resulting multivariate dataset on phenotypic plasticity was evaluated to test the hypothesis, that more tolerant genotypes have less affected phenotypes upon stress adaptation. For this, a cluster-analysis-based approach was developed that involved a principal component analysis (PCA), dimension reduction and determination of Euclidean distances. These distances served as measure for the phenotypic plasticity upon heat stress. Statistical evaluation allowed the identification and classification of homogeneous groups consisting each of four putative more or less heat stress tolerant genotypes. The resulting classification of the internal references as “tolerant” highlights the applicability of our proposed tolerance assessment model. PCA factor analysis on principal components 1–3 which covered 76.7% of variance within the phenotypic data, suggested that some laborious measure such as the gas exchange might be replaced with the determination of leaf temperature in larger heat stress screenings. Hence, the overall advantage of the presented method is rooted in its suitability of both, planning and executing screenings for abiotic stress tolerance using multivariate phenotypic data to overcome the challenge of identifying abiotic stress tolerant plants from existing germplasms and promote sustainable agriculture for the future.

Physiological and Molecular Approaches for Developing Thermotolerance in Vegetable Crops: A Growth, Yield and Sustenance Perspective

Vegetables are a distinct collection of plant-based foods that vary in nutritional diversity and form an important part of the healthy diet of the human being. Besides providing basic nutrition, they have great potential for boosting human health. The balanced consumption of vegetables is highly recommended for supplementing the human body with better nutrition density, dietary fiber, minerals, vitamins, and bioactive compounds. However, the production and quality of fresh vegetables are influenced directly or indirectly by exposure to high temperatures or heat stress (HS). A decline in quality traits and harvestable yield are the most common effects of HS among vegetable crops. Heat-induced morphological damage, such as poor vegetative growth, leaf tip burning, and rib discoloration in leafy vegetables and sunburn, decreased fruit size, fruit/pod abortion, and unfilled fruit/pods in beans, are common, often rendering vegetable cultivation unprofitable. Further studies to trace down the possible physiological and biochemical effects associated with crop failure reveal that the key factors include membrane damage, photosynthetic inhibition, oxidative stress, and damage to reproductive tissues, which may be the key factors governing heat-induced crop failure. The reproductive stage of plants has extensively been studied for HS-induced abnormalities. Plant reproduction is more sensitive to HS than the vegetative stages, and affects various reproductive processes like pollen germination, pollen load, pollen tube growth, stigma receptivity, ovule fertility and, seed filling, resulting in poorer yields. Hence, sound and robust adaptation and mitigation strategies are needed to overcome the adverse impacts of HS at the morphological, physiological, and biochemical levels to ensure the productivity and quality of vegetable crops. Physiological traits such as the stay-green trait, canopy temperature depression, cell membrane thermostability, chlorophyll fluorescence, relative water content, increased reproductive fertility, fruit numbers, and fruit size are important for developing better yielding heat-tolerant varieties/cultivars. Moreover, various molecular approaches such as omics, molecular breeding, and transgenics, have been proved to be useful in enhancing/incorporating tolerance and can be potential tools for developing heat-tolerant varieties/cultivars. Further, these approaches will provide insights into the physiological and molecular mechanisms that govern thermotolerance and pave the way for engineering "designer" vegetable crops for better health and nutritional security. Besides these approaches, agronomic methods are also important for adaptation, escape and mitigation of HS protect and improve yields.

Increase Crop Resilience to Heat Stress Using Omic Strategies

Varieties of various crops with high resilience are urgently needed to feed the increased population in climate change conditions. Human activities and climate change have led to frequent and strong weather fluctuation, which cause various abiotic stresses to crops. The understanding of crops' responses to abiotic stresses in different aspects including genes, RNAs, proteins, metabolites, and phenotypes can facilitate crop breeding. Using multi-omics methods, mainly genomics, transcriptomics, proteomics, metabolomics, and phenomics, to study crops' responses to abiotic stresses will generate a better, deeper, and more comprehensive understanding. More importantly, multi-omics can provide multiple layers of information on biological data to understand plant biology, which will open windows for new opportunities to improve crop resilience and tolerance. However, the opportunities and challenges coexist. Interpretation of the multidimensional data from multi-omics and translation of the data into biological meaningful context remained a challenge. More reasonable experimental designs starting from sowing seed, cultivating the plant, and collecting and extracting samples were necessary for a multi-omics study as the first step. The normalization, transformation, and scaling of single-omics data should consider the integration of multi-omics. This review reports the current study of crops at abiotic stresses in particular heat stress using omics, which will help to accelerate crop improvement to better tolerate and adapt to climate change.

Photoprotection Differences between Dominant Tree Species at Mid- and Late-Successional Stages in Subtropical Forests in Different Seasonal Environments

Plants growing in subtropical regions are often affected by high temperature and high light in summer and low temperature and high light in winter. However, few studies have compared the photoprotection mechanism of tree species at different successional stages in these two environments, although such studies would be helpful in understanding the succession of forest communities in subtropical forests. In order to explore the strategies used by dominant species at different successional stages to cope with these two environmental conditions, we selected two dominant species in the mid-successional stage, Schima superba and Castanopsis chinensis, and two dominant species in the late-successional stage, Machilus chinensis and Cryptocarya chinensis. The cell membrane permeability, chlorophyll fluorescence, chlorophyll content, and a few light-protective substances of these dominant species were measured in summer and winter. The results show that in summer, the young leaves of dominant species in the mid-successional stage showed higher anthocyanin content and superoxide dismutase (SOD) activity, while those in the late-successional stage showed higher flavonoid and total phenolic content, total antioxidant activity, non-photochemical quenching (NPQ), and carotenoid/chlorophyll (Car/Chl) ratio. In winter, young leaves of dominant species in the mid-successional stage were superior to those in the late-successional stage only in terms of catalase (CAT) activity and NPQ, while the anthocyanin, flavonoids, and total phenol content, total antioxidant capacity, and Car/Chl ratio were significantly lower compared to the late-successional stage. Our results show that the dominant species in different successional stages adapted to environmental changes in different seasons through the alterations in their photoprotection strategies. In summer, the dominant species in the mid-successional stage mainly achieved photoprotection through light shielding and reactive-oxygen-species scavenging by SOD, while the antioxidant capacity of trees in the late-successional stage mainly came from an increased antioxidative compounds and heat dissipation. In winter, the dominant species in the mid-successional stage maintained their photoprotective ability mainly through the scavenging of reactive oxygen species by CAT and the heat dissipation provided by NPQ, while those in the late-successional stage were mainly protected by a combination of processes, including light shielding, heat dissipation, and antioxidant effects provided by enzymatic and non-enzymatic antioxidant systems. In conclusion, our study partially explains the mechanism of community succession in subtropical forests.

Mutual impacts and interactions of antibiotic resistance genes, microcystin synthetase genes, graphene oxide, and Microcystis aeruginosa in synthetic wastewater

The physiological impacts and interactions of antibiotic resistance gene (ARG) abundance, microcystin synthetase gene expression, graphene oxide (GO), and Microcystis aeruginosa in synthetic wastewater were investigated. The results demonstrated that the absolute abundance of sul1, sul2, tetW, and tetM in synthetic wastewater dramatically increased to 365.2%, 427.1%, 375.2%, and 231.7%, respectively, when the GO concentration was 0.01 mg/L. Even more interesting is that the sum gene copy numbers of mcyA-J also increased to 243.2%. The appearance of GO made the significant correlation exist between ARGs abundance and mcyA-J expression. Furthermore, M. aeruginosa displayed better photosynthetic performance and more MCs production at 0.01 mg/L GO. There were 65 pairs of positive correlations between the intracellular differential metabolites of M. aeruginosa and the abundance of sul1, sul2, tetM, and tetW with various GO concentrations. The GO will impact the metabolites and metabolic pathway in M. aeruginosa. The metabolic changes impacted the ARGs, microcystin synthetase genes, and physiological characters in algal cells. Furthermore, there were complex correlations among sul1, sul2, tetM, tetW, mcyA-J, MCs, photosynthetic performance parameters, and ROS. The different concentration of GO will aggravate the hazards of M. aeruginosa by promoting the expression of mcyA-J, producing more MCs; simultaneously, it may cause the spread of ARGs.

Genetic and Molecular Mechanisms Conferring Heat Stress Tolerance in Tomato Plants

Climate change is a major threat to global food security. Changes in climate can directly impact food systems by reducing the production and genetic diversity of crops and their wild relatives, thereby restricting future options for breeding improved varieties and reducing the ability to adapt crops to future challenges. The global surface temperature is predicted to rise by an average of 0.3°C during the next decade, and the Paris Agreement (Paris Climate Accords) aims to limit global warming to below an average of 2°C, preferably to 1.5°C compared to pre-industrial levels. Even if the goal of the Paris Agreement can be met, the predicted rise in temperatures will increase the likelihood of extreme weather events, including heatwaves, making heat stress (HS) a major global abiotic stress factor for many crops. HS can have adverse effects on plant morphology, physiology, and biochemistry during all stages of vegetative and reproductive development. In fruiting vegetables, even moderate HS reduces fruit set and yields, and high temperatures may result in poor fruit quality. In this review, we emphasize the effects of abiotic stress, especially at high temperatures, on crop plants, such as tomatoes, touching upon key processes determining plant growth and yield. Specifically, we investigated the molecular mechanisms involved in HS tolerance and the challenges of developing heat-tolerant tomato varieties. Finally, we discuss a strategy for effectively improving the heat tolerance of vegetable crops.

Effects of High-Temperature Stress during Plant Cultivation on Tomato (Solanum lycopersicum L.) Fruit Nutrient Content

Agriculture is among the sectors that will be impacted first and most by the adverse effects of climate change. Therefore, developing new high-temperature tolerant varieties is an essential economic measure in adaptation to near-future climate change. Likewise, there is a growing interest in increasing the antioxidant content of crops to improve food quality and produce crops with high-stress tolerance. Tomato is the most grown and consumed species in horticultural plants; however, it is vulnerable to 35°C and above high temperatures during cultivation. This study used twenty high-temperature tolerant, two susceptible genotypes, and two commercial tomato varieties in the open field. The experiment was applied under control and high-temperature stress conditions based on a randomized block design with 4 replications and 12 plants per repetition. The study investigated the fruit’s selected quality properties and antioxidant compounds, namely, total soluble solutes (Brix), titratable acidity, pH, electrical conductivity (EC), lycopene, β-carotene, and vitamin C, along with total phenols and total flavonoids under control and stress conditions. As a result, in general, total soluble solutes, titratable acidity, total phenol, and vitamin C contents under high-temperature conditions were determined to increase in tolerant tomato genotypes, while decreases were noted for pH, EC, total flavonoids, lycopene, and β-carotene. However, different specific responses on the basis of genotypes and useful information for breeding studies have been identified. These data on fruit nutrient content and antioxidants will be helpful when breeding tomato varieties to be grown in high-temperature conditions.

Heat Stress at Early Reproductive Stage Differentially Alters Several Physiological and Biochemical Traits of Three Tomato Cultivars

Global warming is predicted to be increased in the upcoming years, resulting in frequent heatwaves or hot days worldwide, which can seriously affect crop growth and productivity. The responses of heat stress to several photophysiological and biochemical traits in three tomato cultivars were investigated in a pot experiment, and the heat tolerance capability of these cultivars was evaluated based on the investigated traits. The experiment was followed by a factorial completely randomized design, and the factors were (i) tomato cultivars (BARI Hybrid Tomato-5, BARI Tomato-14, and BARI Tomato-15) and (ii) heat stress (control and heat). The plants of three tomato cultivars were exposed to short-term heat stress (four days at 38/25 °C day/night temperature) at the flowering stage. The measured traits such as dry mass, leaf greenness (SPAD), maximum photochemical efficiency of photosystem II (Fv/Fm), photosynthetic rate (A), stomatal conductance (gs), transpiration rate (E), leaf chlorophyll, and carotenoid content were significantly declined, while the catalase and ascorbate peroxidase activities were increased by heat stress in all three tomato cultivars except BARI Tomato-15, which showed unaltered gs, E, and carotenoids. The percent reduction (over control) in SPAD, Fv/Fm, A, total chlorophyll, and total carotenoids was significantly lower (11, 06, 25, 34, and 19%, respectively), whereas the percent increase in catalase and ascorbate peroxidase activities was substantially higher (70 and 72%, respectively) in BARI Tomato-15 than in other cultivars. Based on the measured physiological and biochemical traits, the cultivar BARI Tomato-15 showed better heat tolerance than the other cultivars.

Contrasting processing tomato cultivars unlink yield and pollen viability under heat stress

Climate change is causing temperature increment in crop production areas worldwide, generating conditions of heat stress that negatively affect crop productivity. Tomato (Solanum lycopersicum), a major vegetable crop, is highly susceptible to conditions of heat stress. When tomato plants are exposed to ambient day/night temperatures that exceed 32 °C/20 °C, respectively, during the reproductive phase, fruit set and fruit weight are reduced, leading to a significant decrease in yield. Processing tomato cultivars are cultivated in open fields, where environmental conditions are not controlled; therefore, plants are exposed to multiple abiotic stresses, including heat stress. Nonetheless, information on stress response in processing tomatoes is very limited. Understanding the physiological response of modern processing tomato cultivars to heat stress may facilitate the development of thermotolerant cultivars. Here, we compared two tomato processing cultivars, H4107 and H9780, that we found to be constantly differing in yield performance. Using field and temperature-controlled greenhouse experiments, we show that the observed difference in yield is attributed to the occurrence of heat stress conditions. In addition, fruit set and seed production were significantly higher in the thermotolerant cultivar H4107, compared with H9780. Despite the general acceptance of pollen viability as a measure of thermotolerance, there was no difference in the percentage of viable pollen between H4107 and H9780 under either of the conditions tested. In addition to observations of similar pollen germination and bud abscission rates, our results suggest that processing tomato cultivars may present a particular case, in which pollen performance is not determining reproductive thermotolerance. Our results also demonstrate the value of combining controlled and uncontrolled experimental settings, in order to validate and identify heat stress-related responses, thus facilitating the development of thermotolerant processing tomato cultivars.

Identification of tomato accessions as source of new genes for improving heat tolerance: from controlled experiments to field

BACKGROUND

Due to global warming, the search for new sources for heat tolerance and the identification of genes involved in this process has become an important challenge as of today. The main objective of the current research was to verify whether the heat tolerance determined in controlled greenhouse experiments could be a good predictor of the agronomic performance in field cultivation under climatic high temperature stress.

RESULTS

Tomato accessions were grown in greenhouse under three temperature regimes: control (T1), moderate (T2) and extreme heat stress (T3). Reproductive traits (flower and fruit number and fruit set) were used to define heat tolerance. In a first screening, heat tolerance was evaluated in 219 tomato accessions. A total of 51 accessions were identified as being potentially heat tolerant. Among those, 28 accessions, together with 10 accessions from Italy (7) and Bulgaria (3), selected for their heat tolerance in the field in parallel experiments, were re-evaluated at three temperature treatments. Sixteen tomato accessions showed a significant heat tolerance at T3, including five wild species, two traditional cultivars and four commercial varieties, one accession from Bulgaria and four from Italy. The 15 most promising accessions for heat tolerance were assayed in field trials in Italy and Bulgaria, confirming the good performance of most of them at high temperatures. Finally, a differential gene expression analysis in pre-anthesis (ovary) and post-anthesis (developing fruit) under heat stress among pairs of contrasting genotypes (tolerant and sensitive from traditional and modern groups) showed that the major differential responses were produced in post-anthesis fruit. The response of the sensitive genotypes included the induction of HSP genes, whereas the tolerant genotype response included the induction of genes involved in the regulation of hormones or enzymes such as abscisic acid and transferases.

CONCLUSIONS

The high temperature tolerance of fifteen tomato accessions observed in controlled greenhouse experiments were confirmed in agronomic field experiments providing new sources of heat tolerance that could be incorporated into breeding programs. A DEG analysis showed the complex response of tomato to heat and deciphered the different mechanisms activated in sensitive and tolerant tomato accessions under heat stress.

Heat-tolerant hot pepper exhibits constant photosynthesis via increased transpiration rate, high proline content and fast recovery in heat stress condition

Understanding the mechanism for heat tolerance is important for the hot pepper breeding program to develop heat-tolerant cultivars in changing climate. This study was conducted to investigate physiological and biochemical parameters related to heat tolerance and to determine leaf heat damage levels critical for selecting heat-tolerant genotypes. Seedlings of two commercial cultivars, heat-tolerant 'NW Bigarim' (NB) and susceptible 'Chyung Yang' (CY), were grown in 42 °C for ten days. Photosynthesis, electrolyte conductivity, proline content were measured among seedlings during heat treatment. Photosynthetic rate was significantly reduced in 'CY' but not in 'NB' seedlings in 42 °C. Stomatal conductivity and transpiration rate was significantly higher in 'NB' than 'CY'. Proline content was also significantly higher in 'NB'. After heat treatment, leaf heat damages were determined as 0, 25, 50 and 75% and plants with different leaf heat damages were moved to a glasshouse (30-32/22-24 °C in day/night). The growth and developmental parameters were investigated until 70 days. 'NB' was significantly affected by leaf heat damages only in fruit yield while 'CY' was in fruit set, number and yield. 'NB' showed fast recovery after heat stress compared to 'CY'. These results suggest that constant photosynthetic rate via increased transpiration rate as well as high proline content in heat stress condition confer faster recovery from heat damage of heat-tolerant cultivars in seedlings stages.

Heat-tolerant hot pepper exhibits constant photosynthesis via increased transpiration rate, high proline content and fast recovery in heat stress condition

Understanding the mechanism for heat tolerance is important for the hot pepper breeding program to develop heat-tolerant cultivars in changing climate. This study was conducted to investigate physiological and biochemical parameters related to heat tolerance and to determine leaf heat damage levels critical for selecting heat-tolerant genotypes. Seedlings of two commercial cultivars, heat-tolerant ‘NW Bigarim’ (NB) and susceptible ‘Chyung Yang’ (CY), were grown in 42 °C for ten days. Photosynthesis, electrolyte conductivity, proline content were measured among seedlings during heat treatment. Photosynthetic rate was significantly reduced in ‘CY’ but not in ‘NB’ seedlings in 42 °C. Stomatal conductivity and transpiration rate was significantly higher in ‘NB’ than ‘CY’. Proline content was also significantly higher in ‘NB’. After heat treatment, leaf heat damages were determined as 0, 25, 50 and 75% and plants with different leaf heat damages were moved to a glasshouse (30–32/22–24 °C in day/night). The growth and developmental parameters were investigated until 70 days. ‘NB’ was significantly affected by leaf heat damages only in fruit yield while ‘CY’ was in fruit set, number and yield. ‘NB’ showed fast recovery after heat stress compared to ‘CY’. These results suggest that constant photosynthetic rate via increased transpiration rate as well as high proline content in heat stress condition confer faster recovery from heat damage of heat-tolerant cultivars in seedlings stages.

Elevated CO2 modulates the effect of heat stress responses in Triticum aestivum by differential expression of isoflavone reductase-like (IRL) gene

Two wheat genotypes forming high and low biomass (HB and LB), exhibiting differential expression of an isoflavone reductase-like (IRL) gene, and resulting in contrasting grain yield under heat stress field conditions, were analyzed in detail for their responses under controlled heat and elevated CO2 conditions. Significant differences in IRL expression between the two lines were hypothesized to be the basis of their differential performance under the tested conditions and their stress tolerance potential. By a holistic approach integrating advanced cell physiological phenotyping of the antioxidative and phytohormone system in spikes and leaves with measurements of ecophysiological and agronomic traits, the genetic differences of the genotypes in IRL expression were assessed. In response to heat and elevated CO2, the two genotypes showed opposite regulation of IRL expression, which was associated with cytokinin concentration, total flavonoid contents, activity of superoxide dismutase, antioxidant capacity and photosynthetic rate in leaves and cytokinin concentration and ascorbate peroxidase activity in spikes. Our study showed that IRL expression is associated with wheat yield performance under heat stress at anthesis, mediated by diverse physiological mechanisms. Hence, based on our results, the IRL gene is a promising candidate for developing genetic markers for breeding heat-tolerant wheat.

Heat Treatment in Two Tomato Cultivars: A Study of the Effect on Physiological and Growth Recovery

High temperature (HT) significantly affects crop physiological traits and reduces productivity in plants. To increase yields as well as survival of crops under HT, developing heat-tolerant plants is one of the main targets in crop breeding programs. The present study attempted to investigate the linkage of the heat tolerance between the seedling and reproductive growth stages of tomato cultivars ’Dafnis‘ and ’Minichal.’ This research was undertaken to evaluate heat tolerance under two experimental designs such as screening at seedling stage and screening from reproductive traits in greenhouses. Survival rate and physiological responses in seedlings of tomatoes with 4-5 true leaves were estimated under HT (40 °C, RH 70%, day/night, respectively) and under two control and HT greenhouse conditions (day time 28 °C and 40 °C, respectively). Heat stress significantly affected physiological–chemical (photosynthesis, electrolyte conductivity, proline) and vegetative parameters (plant height, shoot fresh weight, root fresh weight) in all tomato seedlings. The findings revealed that regardless of tomato cultivars the photosynthesis, chlorophyll, total proline and electrical conductivity parameters were varied in seedlings during the heat stress period. The heat tolerance rate of tomatoes in the seedling stage might not always be associated with reproductive parameters. HT reduced fruit parameters such as fruit weight (31.9%), fruit length (14.1%), fruit diameter (19.1%), and fruit hardness (9.1%) compared to NT under HT in heat-susceptible tomato cultivar ‘Dafnis’, while in heat-tolerant cultivar ‘Minichal’ fruit length (7.1%) and fruit diameter (12.1%) was decreased by the effects of HT, but on the contrary fruit weight (3.6%) and fruit hardness (8.3%) were increased. In conclusion, screening and selection for tomatoes should be evaluated at the vegetative and reproductive stages with consideration of reproductive parameters.

High temperature induced changes in quality and yield parameters of tomato (Solanum lycopersicum L.) and similarity coefficients among genotypes using SSR markers

High temperature induced by climatic fluctuations are an important threat for plant growth, development and quality of agricultural produces. Adaptableness to environmental changes generally derives from a large set of genetic traits affecting physio-morphological, biochemical and agronomic parameters. Therefore, the identification of genotypes with higher yield and good quality parameters at high temperatures is becoming increasingly necessary for future breeding programs. Here, we analyzed the performance of different tomato genotypes grown under elevated temperatures in terms of yield and nutritional quality of the fruit. High temperature stress was induced from flower initiation to maturity stage by keeping the pots in a temperature controlled green house facility for 45 days. The quality and yield parameters were taken at the harvesting stage. Starch and soluble sugar concentration in the leaves of tomato genotypes showed significant reduction in its amount under heat stress. Titrable acidity (TA), total soluble solids (TSS) and ascorbic acid content of tomato fruits were highest under high temperature conditions compared to ambient condition but lycopene content decreased with rise in temperature. The yield attributes viz., number of fruits/plant, fruit set %, average fruit weight (g), yield per plant (g/plant) were significantly lower for Arka Saurabh, Arka Rakshak and Pusa Rohini when compared to other genotypes under study. Molecular characterization of selected 22 tomato genotypes were assessed using 25 simple sequence repeat (SSR) markers. Phylogenetic tree was constructed by the unweighted neighbour-joining method (UPGMA) using NTSYSpc cluster analysis software. The Jaccard's similarity matrix was constructed using the SIMQUAL method using UPGMA algorithm in NTSYSpc. Jaccard's similarity matrix among these tomato genotypes ranged from a minimum of 0.22 to a maximum of 1 with an average genetic similarity of 0.67. Hence this study has importance in identifying genotypes that could maintain good quality and higher yield under high temperature condition.

An overview of heat stress in tomato (Solanum lycopersicum L.)

Heat stress has been defined as the rise of temperature for a period of time higher than a threshold level, thereby permanently affecting the plant growth and development. Day or night temperature is considered as the major limiting factor for plant growth. Earlier studies reported that night temperature is an important factor in the heat reaction of the plants. Tomato cultivars capable of setting viable fruits under night temperatures above 21 °C are considered as heat-tolerant cultivars. The development of breeding objectives is generally summarized in four points: (a) cultivars with higher yield, (b) disease resistant varieties in the 1970s, (c) long shelf-life in 1980s, and (d) nutritive and taste quality during 1990s. Some unique varieties like the dwarf "Micro-Tom", and the first transgenic tomato (FlavrSavr) were developed through breeding; they were distributed late in the 1980s. High temperature significantly affects seed, pollen viability and root expansion. Researchers have employed different parameters to evaluate the tolerance to heat stress, including membrane thermo stability, floral characteristics (Stigma exertion and antheridia cone splitting), flower number, and fruit yield per plant. Reports on pollen viability and fruit set/plant under heat stress by comparing the pollen growth and tube development in heat-treated and non-heat-stressed conditions are available in literature. The electrical conductivity (EC) have been used to evaluate the tolerance of some tomato cultivars in vitro under heat stress conditions as an indication of cell damage due to electrolyte leakage; they classified the cultivars into three groups: (a) heat tolerant, (b) moderately heat tolerant, and (c) heat sensitive. It is important to determine the range in genetic diversity for heat tolerance in tomatoes. Heat stress experiments under field conditions offer breeders information to identify the potentially heat tolerant germplasm.

Glycinebetaine mitigated the photoinhibition of photosystem II at high temperature in transgenic tomato plants

Photosystem II (PSII), especially the D1 protein, is highly sensitive to the detrimental impact of heat stress. Photoinhibition always occurs when the rate of photodamage exceeds the rate of D1 protein repair. Here, genetically engineered codA-tomato with the capability to accumulate glycinebetaine (GB) was established. After photoinhibition treatment at high temperature, the transgenic lines displayed more thermotolerance to heat-induced photoinhibition than the control line. GB maintained high expression of LeFtsHs and LeDegs and degraded the damaged D1 protein in time. Meanwhile, the increased transcription of synthesis-related genes accelerated the de novo synthesis of D1 protein. Low ROS accumulation reduced the inhibition of D1 protein translation in the transgenic plants, thereby reducing protein damage. The increased D1 protein content and decreased phosphorylated D1 protein (pD1) in the transgenic plants compared with control plants imply that GB may minimize photodamage and maximize D1 protein stability. As D1 protein exhibits a high turnover, PSII maybe repaired rapidly and efficiently in transgenic plants under photoinhibition treatment at high temperature, with the resultant mitigation of photoinhibition of PSII.

Modulating Vapor Pressure Deficit in the Plant Micro-Environment May Enhance the Bioactive Value of Lettuce

Growing demand for horticultural products of accentuated sensory, nutritional, and functional quality traits has been driven by the turn observed in affluent societies toward a healthy and sustainable lifestyle relying principally on plant-based food. Growing plants under protected cultivation facilitates more precise and efficient modulation of the plant microenvironment, which is essential for improving vegetable quality. Among the environmental parameters that have been researched for optimization over the past, air relative humidity has always been in the background and it is still unclear if and how it can be modulated to improve plants’ quality. In this respect, two differentially pigmented (green and red) Salanova® cultivars (Lactuca sativa L. var. capitata) were grown under two different Vapor Pressure Deficits (VPDs; 0.69 and 1.76 kPa) in a controlled environment chamber in order to appraise possible changes in mineral and phytochemical composition and in antioxidant capacity. Growth and morpho-physiological parameters were also analyzed to better understand lettuce development and acclimation mechanisms under these two VPD regimes. Results showed that even though Salanova plants grown at low VPD (0.69 kPa) increased their biomass, area, number of leaves and enhanced Fv/Fm ratio, plants at high VPD increased the levels of phytochemicals, especially in the red cultivar. Based on these results, we have discussed the role of high VPD facilitated by controlled environment agriculture as a mild stress aimed to enhance the quality of leafy greens.

Exploring Morpho-Physiological Variation for Heat Stress Tolerance in Tomato

Texas tomato production is vulnerable to extreme heat in the spring-summer cropping period, which is exacerbated by the lack of superior genetic materials that can perform well in such environments. There is a dire need for selecting superior varieties that can adapt to warm environments and exhibit high yield stability under heat stress conditions. This research aimed at identifying heat-tolerant varieties under heat-stress conditions in controlled and open-field environments and was carried out in three stages. For the first experiment, 43 varieties were screened based on yield responses in natural open-field environment. From those, 18 varieties were chosen and exposed to control (greenhouse: 26/20 °C) and constant heat-stress (growth-chamber: 34/24 °C) conditions for three months. Measurements were done for chlorophyll fluorescence, chlorophyll content (SPAD), plant height, stem diameter and heat injury index (HII). The last experiment was conducted in an open field with a pool of varieties selected from the first and second experiments. Leaf gas exchange, leaf temperature, chlorophyll fluorescence, SPAD value, electrolyte leakage, heat injury index and yield were assessed. From the combined studies, we concluded that heat-tolerant genotypes selected by using chlorophyll fluorescence and HII in controlled heat-stress conditions also exhibited heat-tolerance in open-field environments. Electrolyte leakage and HII best distinguished tomato varieties in open-field environments as plants with low electrolyte leakage and HII had higher total yield. 'Heat Master,' 'New Girl,' 'HM-1823,' 'Rally,' 'Valley Girl,' 'Celebrity,' and 'Tribeca' were identified as high heat-tolerant varieties. Through trait correlation analysis we provide a better understanding of which traits could be useful for screening and breeding other heat-tolerant tomato varieties.

Review: Metabolomics as a prediction tool for plants performance under environmental stress

Metabolomics as a diagnosis tool for plant performance has shown good features for breeding and crop improvement. Additionally, due to limitations in land area and the increasing climate changes, breeding projects focusing on abiotic stress tolerance are becoming essential. Nowadays no universal method is available to identify predictive metabolic markers. As a result, research aims must dictate the best method or combination of methods. To this end, we will introduce the key aspects to consider regarding growth scenarios and sampling strategies and discuss major analytical and data treatment approaches that are available to find metabolic markers of plant performance.

Performance of Hylocereus (Cactaceae) species and interspecific hybrids under high-temperature stress

High temperatures limit the successful cultivation of the Hylocereus species on a global basis. We aimed to investigate the degree of heat tolerance in three species, namely, the diploids Hylocereus undatus and H. monacanthus, and the tetraploid H. megalanthus, and nine of their interspecific-interploid hybrids. Rooted cuttings were exposed to heat stress (45/35 °C) or control conditions (25/20 °C) for eight days. Initially, the plants were screened for their tolerance to heat stress and ranked into four heat tolerance categories: good tolerance, moderate tolerance, low tolerance, or sensitive, according to the decrease in the maximum quantum efficiency of photosystem II (F_v/F_m) and visual stem damage. The physiological and biochemical performances of the parental species and of three hybrids representing three different heat-tolerance categories were further analyzed in depth. H. megalanthus (classified as heat sensitive) showed a 65% decrease in F_v/F_m and severe visual stem damage, along with a marked reduction in total chlorophyll content, a large increase in malondialdehyde, and inhibition of catalase activity. H. undatus and H. monacanthus, (classified as low-tolerance species) exhibited slight stem "liquification." The good-tolerance hybrid Z-16 exhibited the best performance under heat stress (21% decrease in F_v/F_m) and the absence of stem damage, coupled with a small decrease in total chlorophyll content, a slight increase in malondialdehyde, high antioxidant activity, and proline accumulation progressing with time. Our findings revealed that most of the hybrids performed better than their parental species, indicating that our breeding programs can provide Hylocereus cultivars suitable for cultivation in heat-challenging regions.

Eco-Physiological Screening of Different Tomato Genotypes in Response to High Temperatures: A Combined Field-to-Laboratory Approach

High temperatures represent a limitation for growth and development of many crop species. Several studies have demonstrated that the yield reduction of tomato under high temperatures and drought is mainly due to a photosynthetic decline. In this paper, a set of 15 tomato genotypes were screened for tolerance to elevated temperatures by cultivating plants under plastic walk-in tunnels. To assess the potential tolerance of tomato genotypes to high temperatures, measurements of chlorophyll fluorescence, pigments content and leaf functional traits have been carried out together with the evaluation of the final yields. Based on the greenhouse trials, a group of eight putative heat-sensitive and heat-tolerant tomato genotypes was selected for laboratory experiments aimed at investigating the effects of short-term high temperatures treatments in controlled conditions. The chlorophyll fluorescence induction kinetics were recorded on detached leaves treated for 60 min at 35 °C or at 45 °C. The last treatment significantly affected the photosystem II (PSII) photochemical efficiency (namely maximum PSII quantum efficiency, F_v/F_m, and quantum yield of PSII electron transport, Φ_PSII) and the non-photochemical quenching (NPQ) in the majority of genotypes. The short-term heat shock treatments also led to significant differences in the shape of the slow Kautsky kinetics and its significant time points (chlorophyll fluorescence levels minimum O, peak P, semi-steady state S, maximum M, terminal steady state T) compared to the control, demonstrating heat shock-induced changes in PSII functionality. Genotypes potentially tolerant to high temperatures have been identified. Our findings support the idea that chlorophyll fluorescence parameters (i.e., Φ_PSII or NPQ) and some leaf functional traits may be used as a tool to detect high temperatures-tolerant tomato cultivars.

Abscisic Acid Negatively Modulates Heat Tolerance in Rolled Leaf Rice by Increasing Leaf Temperature and Regulating Energy Homeostasis

BACKGROUND

Abscisic acid (ABA) acts as a signaling hormone in plants against abiotic stress, but its function in energy homeostasis under heat stress is unclear.

RESULTS

Two rice genotypes, Nipponbare (wild-type, WT) with flat leaves and its mutant high temperature susceptibility (hts) plant with semi-rolled leaves, were subjected to heat stress. We found significantly higher tissue temperature, respiration rate, and ABA and H2O2 contents in leaves as well as a lower transpiration rate and stomatal conductance in hts than WT plants. Additionally, increased expression of HSP71.1 and HSP24.1 as well as greater increases in carbohydrate content, ATP, NAD (H), and dry matter weight, were detected in WT than hts plants under heat stress. More importantly, exogenous ABA significantly decreased heat tolerance of hts plants, but clearly enhanced heat resistance of WT plants. The increases in carbohydrates, ATP, NAD (H), and heat shock proteins in WT plants were enhanced by ABA under heat stress, whereas these increases were reduced in hts plants.

CONCLUSION

It was concluded that ABA is a negative regulator of heat tolerance in hts plants with semi-rolled leaves by modulating energy homeostasis.

Accelerating Breeding for Heat Tolerance in Tomato (Solanum lycopersicum L.): An Integrated Approach

Heat stress is a major limiting factor for crop productivity. Tomato is highly sensitive to heat stress, which can result in a total yield loss. To adapt to current and future heat stress, there is a dire need to develop heat tolerant cultivars. Here, we review recent attempts to improve screening for heat tolerance and to exploit genetic and genomic resources in tomatoes. We provide key factors related to phenotyping environments and traits (morphological, physiological, and metabolic) to be considered to identify and breed thermo-tolerant genotypes. There is significant variability in tomato germplasm that can be harnessed to breed for thermo-tolerance. Based on our review, we propose that the use of advanced backcross populations and chromosome segments substitution lines is the best means to exploit variability for heat tolerance in non-cultivated tomato species. We applied a meta quantitative trait loci (MQTL) analysis on data from four mapping experiments to co-localize QTL associated with heat tolerance traits (e.g., pollen viability, number of pollen, number of flowers, style protrusion, style length). The analysis revealed 13 MQTL of which 11 were composed of a cluster of QTL. Overall, there was a reduction of about 1.5-fold in the confidence interval (CI) of the MQTL (31.82 cM) compared to the average CI of individual QTL (47.4 cM). This confidence interval is still large and additional mapping resolution approaches such as association mapping and multi-parent linkage mapping are needed. Further investigations are required to decipher the genetic architecture of heat tolerance surrogate traits in tomatoes. Genomic selection and new breeding techniques including genome editing and speed breeding hold promise to fast-track development of improved heat tolerance and other farmer- and consumer-preferred traits in tomatoes.

Evaluating the Comprehensive Performance of Herbaceous Peonies at low latitudes by the Integration of Long-running Quantitative Observation and Multi-Criteria Decision Making Approach

Enlarging the planting area of economic plants, such as the "Southward Planting of Herbaceous Peony" (Paeonia lactiflora. Pall), is significant for improving people's lives. Peony is globally known as an ornamental because of gorgeous flowers and is mainly cultivated in the temperate regions with relatively cool and dry climates in the Northern Hemisphere. Promoting the landscape application of peony to the lower latitude regions is difficult because of the hot-humid climate. In this study, 29 northern peony cultivars and a unique Chinese southern peony, 'Hang Baishao', were introduced to Hangzhou, located in the central subtropics. Annual growth cycles, resistances and dormancy durations were measured, and crossbreeding between the southern and northern peonies was performed for six years, from 2012 to 2017. Based on data collected from the long-running quantitative observation (LQO), a multi-criteria decision making (MCDM) system was established to evaluate the comprehensive planting performance of these 30 cultivars in the central subtropics. 'Qihua Lushuang', 'Hang Baishao' and 'Meiju' were highly recommended, while 'Zhuguang' and 'Qiaoling' were scarcely recommended for the Hangzhou landscape. This study highlights the dependability and comprehensiveness of integrating the LQO and MCDM approaches for evaluating the introduction performance of ornamental plants.

Identification of heat-tolerance QTLs and high-temperature stress-responsive genes through conventional QTL mapping, QTL-seq and RNA-seq in tomato

BACKGROUND

High temperature is one of the major abiotic stresses in tomato and greatly reduces fruit yield and quality. Identifying high-temperature stress-responsive (HSR) genes and breeding heat-tolerant varieties is an effective way to address this issue. However, there are few reports on the fine mapping of heat-tolerance quantitative trait locus (QTL) and the identification of HSR genes in tomato. Here, we applied three heat tolerance-related physiological indexes, namely, relative electrical conductivity (REC), chlorophyll content (CC) and maximum photochemical quantum efficiency (Fv/Fm) of PSII (photosystem II), as well as the phenotypic index, the heat injury index (HII), and conventional QTL analysis combined with QTL-seq technology to comprehensively detect heat-tolerance QTLs in tomato seedlings. In addition, we integrated the QTL mapping results with RNA-seq to identify key HSR genes within the major QTLs.

RESULTS

A total of five major QTLs were detected: qHII-1-1, qHII-1-2, qHII-1-3, qHII-2-1 and qCC-1-5 (qREC-1-3). qHII-1-1, qHII-1-2 and qHII-1-3 were located, respectively, in the intervals of 1.43, 1.17 and 1.19 Mb on chromosome 1, while the interval of qHII-2-1 was located in the intervals of 1.87 Mb on chromosome 2. The locations observed with conventional QTL mapping and QTL-seq were consistent. qCC-1-5 and qREC-1-3 for CC and REC, respectively, were located at the same position by conventional QTL mapping. Although qCC-1-5 was not detected in QTL-seq analysis, its phenotypic variation (16.48%) and positive additive effect (0.22) were the highest among all heat tolerance QTLs. To investigate the genes involved in heat tolerance within the major QTLs in tomato, RNA-seq analysis was performed, and four candidate genes (SlCathB2, SlGST, SlUBC5, and SlARG1) associated with heat tolerance were finally detected within the major QTLs by DEG analysis, qRT-PCR screening and biological function analysis.

CONCLUSIONS

In conclusion, this study demonstrated that the combination of conventional QTL mapping, QTL-seq analysis and RNA-seq can rapidly identify candidate genes within major QTLs for a complex trait of interest to replace the fine-mapping process, thus greatly shortening the breeding process and improving breeding efficiency. The results have important applications for the fine mapping and identification of HSR genes and breeding for improved thermotolerance.