Anchored clathrate waters bind antifreeze proteins to ice

Adhesin domains responsible for binding bacteria to surfaces they colonize project outwards from companion split domains

Bacterial adhesins attach their hosts to surfaces that the bacteria will colonize. This surface adhesion occurs through specific ligand-binding domains located towards the distal end of the long adhesin molecules. However, recognizing which of the many adhesin domains are structural and which are ligand binding has been difficult up to now. Here we have used the protein structure modeling program AlphaFold2 to predict structures for these giant 0.2- to 1.5-megadalton proteins. Crystal structures previously solved for several adhesin regions are in good agreement with the models. Whereas most adhesin domains are linked in a linear fashion through their N- and C-terminal ends, ligand-binding domains can be recognized by budding out from a companion core domain so that their ligand-binding sites are projected away from the axis of the adhesin for maximal exposure to their targets. These companion domains are "split" in their continuity by projecting the ligand-binding domain outwards. The "split domains" are mostly β-sandwich extender modules, but other domains like a β-solenoid can serve the same function. Bioinformatic analyses of Gram-negative bacterial sequences revealed wide variety ligand-binding domains are used in their Repeats-in-Toxin adhesins. The ligands for many of these domains have yet to be identified but known ligands include various cell-surface glycans, proteins, and even ice. Recognizing the ligands to which the adhesins bind could lead to ways of blocking colonization by bacterial pathogens. Engineering different ligand-binding domains into an adhesin has the potential to change the surfaces to which bacteria bind.

Weakly Hydrated Solute of Mixed Hydrophobic-Hydrophilic Nature

Infrared (IR) spectroscopy is a commonly used and invaluable tool in studies of solvation phenomena in aqueous solutions. Concurrently, density functional theory calculations and ab initio molecular dynamics simulations deliver the solvation shell picture at the molecular detail level. The mentioned techniques allowed us to gain insights into the structure and energy of the hydrogen bonding network of water molecules around methylsulfonylmethane (MSM). In the hydration sphere of MSM, there are two types of populations of water molecules: a significant share of water molecules weakly bonded to the sulfone group and a smaller share of water molecules strongly bonded to each other around the methyl groups of MSM. The very weak hydrogen bond of water molecules with the hydrophilic group causes the extended network of water hydrogen bonds to be not "anchored" on the sulfone group, and consequently, the MSM hydration shell is labile.

Facile Preparation of Impalement Resistant, Mechanically Robust and Weather Resistant Photothermal Superhydrophobic Coatings for Anti-/De-icing

Photothermal superhydrophobic coatings hold great promise in addressing the limitations of conventional superhydrophobic anti-icing coatings. However, developing such coatings with excellent impalement resistance, mechanical robustness and weather resistance remains a significant challenge. Here, we report facile preparation of robust photothermal superhydrophobic coatings with all the above advantages. The coatings were prepared by spraying a dispersion consisting of fluorinated silica nanoparticles, a silicone-modified polyester adhesive and photothermal carbon black nanoparticles onto Al alloy plates followed by thermal curing. Thermal curing caused migration of perfluorodecyl polysiloxane from within the coatings to the surface, effectively maintaining a low surface energy despite the presence of the adhesive. Therefore, combined with the hierarchical micro-/nanostructure, dense yet rough nanostructure, adhesion of the adhesive and chemically inert components, the coatings exhibited remarkable superhydrophobicity, impalement resistance, mechanical robustness and weather resistance. Furthermore, the coatings demonstrated excellent photothermal effect even in the -10 °C, 80 % relative humidity and weak sunlight (0.2 sun) environment. Consequently, the coatings showed excellent passive anti-icing and active de-icing performance. Moreover, the coatings have good generalizability and scalability. We are confident that this study will accelerate the practical implementation of photothermal superhydrophobic coatings.

Long-range, water-mediated interaction between a moderately active antifreeze protein molecule and the surface of ice

Using molecular dynamics simulations, we show that a molecule of moderately active antifreeze protein (type III AFP, QAE HPLC-12 isoform) is able to interact with ice in an indirect manner. This interaction occurs between the ice binding site (IBS) of the AFP III molecule and the surface of ice, and it is mediated by liquid water, which separates these surfaces. As a result, the AFP III molecule positions itself at a specific orientation and distance relative to the surface of ice, which enables the effective binding (via hydrogen bonds) of the molecule with the nascent ice surface. Our results show that the final adsorption of the AFP III molecule on the surface of ice is not achieved by chaotic diffusion movements, but it is preceded by a remote, water-mediated interaction between the IBS and the surface of ice. The key factor that determines the existence of this interaction is the ability of water molecules to spontaneously form large, high-volume aggregates that can be anchored to both the IBS of the AFP molecule and the surface of ice. The results presented in this work for AFP III are in full agreement with the ones obtained by us previously for hyperactive CfAFP, which indicates that the mechanism of the remote interaction of these molecules with ice remains unchanged despite significant differences in the molecular structure of their ice binding sites. For that reason, we can expect that also other types of AFPs interact with the ice surface according to an analogous mechanism.

Cryopreservation of organoids: Strategies, innovation, and future prospects

Organoid technology has demonstrated unique advantages in multidisciplinary fields such as disease research, tumor drug sensitivity, clinical immunity, drug toxicology, and regenerative medicine. It will become the most promising research tool in translational research. However, the long preparation time of organoids and the lack of high-quality cryopreservation methods limit the further application of organoids. Although the high-quality cryopreservation of small-volume biological samples such as cells and embryos has been successfully achieved, the existing cryopreservation methods for organoids still face many bottlenecks. In recent years, with the development of materials science, cryobiology, and interdisciplinary research, many new materials and methods have been applied to cryopreservation. Several new cryopreservation methods have emerged, such as cryoprotectants (CPAs) of natural origin, ice-controlled biomaterials, and rapid rewarming methods. The introduction of these technologies has expanded the research scope of cryopreservation of organoids, provided new approaches and methods for cryopreservation of organoids, and is expected to break through the current technical bottleneck of cryopreservation of organoids. This paper reviews the progress of cryopreservation of organoids in recent years from three aspects: damage factors of cryopreservation of organoids, new protective agents and loading methods, and new technologies of cryopreservation and rewarming.

Advances in single ice crystal shaping materials: From nature to synthesis and applications in cryopreservation

Antifreeze (glyco) proteins [AF(G)Ps], which are widely present in various extreme microorganisms, can control the formation and growth of ice crystals. Given the significance of cryogenic technology in biomedicine, climate science, electronic energy, and other fields of research, scientists are quite interested in the development and synthesis high-efficiency bionic antifreeze protein materials, particularly to reproduce their dynamic ice shaping (DIS) characteristics. Single ice crystal shaping materials, a promising class of ice-controlling materials, can alter the morphology and growth rate of ice crystals at low temperatures. This review aims to highlight the development of single ice crystal shaping materials and provide a brief comparison between a series of natural and bionic synthetic materials with DIS ability, which include AF(G)Ps, polymers, salts, and nanomaterials. Additionally, we summarize their applications in cryopreservation. Finally, this paper presents the current challenges and prospects encountered in developing high-efficiency and practical single ice crystal shaping materials. STATEMENT OF SIGNIFICANCE: The formation and growth of ice crystals hold a significant importance to an incredibly broad range of fields. Therefore, the design and fabrication of the single ice crystal shaping materials have gained the increasing popularity due to its key role in dynamic ice shaping (DIS) characteristics. Especially, single ice crystal shaping materials are considered one of the most promising candidates as ice inhibitors, presenting tremendous prospects for enhancing cryopreservation. In this work, we focus on the molecular characteristics, structure-function relationships, and DIS mechanisms of typical natural and biomimetic synthetic materials. This review may provide inspiration for the design and preparation of single ice crystal shaping materials and give guidance for the development of effective cryopreservation agent.

Divergent Mechanisms of Ice Growth Inhibition by Antifreeze Proteins

Antifreeze proteins (AFPs) are biomolecules that can bind to ice and hinder its growth, thus holding significant potential for biotechnological and biomedical applications. AFPs are a subset of ice-binding proteins (IBPs) and are found in various organisms across different life kingdoms. This mini-review investigates the underlying mechanisms by which AFPs impede ice growth, emphasizing the disparities between hyperactive and moderate AFPs. Hyperactive AFPs exhibit heightened thermal hysteresis (TH) activity and can bind to both the basal and prism planes of ice crystals, enabling them to endure extremely cold temperatures. In contrast, moderate AFPs predominantly bind to the prism/pyramidal planes and demonstrate lower TH activity. The structural diversity of AFPs and the presence of ordered water molecules on their ice-binding sites (IBS) have been subjects of debate among researchers. Multiple hypotheses have been proposed concerning the significance of ordered water molecules in ice binding. Gaining insights into the binding dynamics and the factors influencing TH activity in AFPs is crucial for the development of efficient synthetic compounds and the establishment of comprehensive models to elucidate ice growth inhibition. Here we emphasize the necessity for further research to unravel the mechanisms of AFPs and presents a pathway for constructing models capable of comprehensively explaining their inhibitory effects on ice growth.

Multiscale Molecular Dynamics Simulations of Ice-Binding Proteins

Ice-binding proteins (IBPs) are a diverse class of proteins that are essential for the survival of organisms in cold conditions. IBPs are diverse in their function and can prevent or promote ice growth and selectively bind to specific crystallographic planes of the growing ice lattice. Moreover, IBPs are widely utilized to modulate ice crystal growth and recrystallization in the food industry and as cryoprotectants to preserve biological matter. A key unresolved aspect of the mode of action is how the ice-binding sites of these proteins distinguish between ice and water and interact with multiple crystal facets of the ice. The use of molecular dynamics (MD) simulation allows us to thoroughly investigate the binding mechanism and energetics of ice-binding proteins, to complement and expand on the mechanistic understandings gained from experiments. In this chapter, we describe a series of molecular dynamics simulation methodologies to investigate the mechanism of action of ice-binding proteins. Specifically, we provide detailed instructions to set up MD simulations to study the binding and interaction of ice-binding proteins using atomistic and coarse-grained simulations.

Ice Isn't the Only Crystal in Town: Structure Determination of Ice-Binding Proteins via X-Ray Crystallography

Ice-binding proteins (IBPs) are proteins that have the remarkable ability to bind to ice, and their study has intrigued researchers for decades. This chapter explores the importance of structural biology in understanding IBPs and highlights the significant contributions of IBPs to the field of structural biology. The structures of various IBPs from different organisms have been elucidated, revealing key elements involved in ice binding. Structural biology techniques, including nuclear magnetic resonance (NMR) spectroscopy, transmission electron cryo-microscopy (cryo-EM), and X-ray crystallography, play crucial roles in solving protein structures. This article focuses on X-ray crystallography as a tool for investigating IBP structures, providing insights into its theoretical and practical aspects, experimental workflows, and common pitfalls to avoid.

Ice nucleation proteins self-assemble into large fibres to trigger freezing at near 0 °C

In nature, frost can form at a few degrees below 0 °C. However, this process requires the assembly of tens of thousands of ice-like water molecules that align together to initiate freezing at these relatively high temperatures. Water ordering on this scale is mediated by the ice nucleation proteins (INPs) of common environmental bacteria like Pseudomonas syringae and Pseudomonas borealis. However, individually, these 100 kDa proteins are too small to organize enough water molecules for frost formation, and it is not known how giant, megadalton-sized multimers, which are crucial for ice nucleation at high sub-zero temperatures, form. The ability of multimers to self-assemble was suggested when the transfer of an INP gene into Escherichia coli led to efficient ice nucleation. Here, we demonstrate that a positively charged subdomain at the C-terminal end of the central β-solenoid of the INP is crucial for multimerization. Truncation, relocation, or change of the charge of this subdomain caused a catastrophic loss of ice nucleation ability. Cryo-electron tomography of the recombinant E. coli showed that the INP multimers form fibres that are ~5 nm across and up to 200 nm long. A model of these fibres as an overlapping series of antiparallel dimers can account for all their known properties and suggests a route to making cell-free ice nucleators for biotechnological applications.

The ice-binding site of antifreeze protein irreversibly binds to cell surface for its hypothermic protective function

Antifreeze proteins (AFPs) are multifunctional polypeptides that adsorb onto ice crystals to inhibit their growth and onto cells to protect them from nonfreezing hypothermic damage. However, the mechanism by which AFP exerts its hypothermic cell protective (HCP) function remains uncertain. Here, we assessed the HCP function of three types of fish-derived AFPs (type I, II, and III AFPs) against human T-lymphoblastic lymphoma by measuring the survival rate (%) of the cells after preservation at 4 °C for 24 h. All AFPs improved the survival rate in a concentration-dependent manner, although the HCP efficiency was inferior for type III AFP compared to other AFPs. In addition, after point mutations were introduced into the ice-binding site (IBS) of a type III AFP, HCP activity was dramatically increased, suggesting that the IBS of AFP is involved in cell adsorption. Significantly, high HCP activity was observed for a mutant that exhibited poorer antifreeze activity, indicating that AFP exerts HCP- and ice-binding functions through a different mechanism. We next incubated the cells in an AFP-containing solution, replaced it with pure EC solution, and then preserved the cells, showing that no significant reduction in the cell survival rate occurred for type I and II AFPs even after replacement. Thus, these AFPs irreversibly bind to the cells at 4 °C, and only tightly adsorbed AFP molecules contribute towards the cell-protection function.

Ice nucleation proteins self-assemble into large fibres to trigger freezing at near 0 °C

In nature, frost can form at a few degrees below 0 °C. However, this process requires the assembly of tens of thousands of ice-like water molecules that align together to initiate freezing at these relatively high temperatures. Water ordering on this scale is mediated by the ice nucleation proteins of common environmental bacteria like Pseudomonas syringae and P. borealis. However, individually, these 100-kDa proteins are too small to organize enough water molecules for frost formation, and it is not known how giant, megadalton-sized multimers, which are crucial for ice nucleation at high sub-zero temperatures, form. The ability of multimers to self-assemble was suggested when the transfer of an ice nucleation protein gene into Escherichia coli led to efficient ice nucleation. Here we demonstrate that a positively-charged sub-domain at the C-terminal end of the central beta-solenoid of the ice nucleation protein is crucial for multimerization. Truncation, relocation, or change of the charge of this subdomain caused a catastrophic loss of ice nucleation ability. Cryo-electron tomography of the recombinant E. coli showed that the ice nucleation protein multimers form fibres that are ~ 5 nm across and up to 200 nm long. A model of these fibres as an overlapping series of antiparallel dimers can account for all their known properties and suggests a route to making cell-free ice nucleators for biotechnological applications.

Deep Learning-based structure modelling illuminates structure and function in uncharted regions of β-solenoid fold space

Repeat proteins are common in all domains of life and exhibit a wide range of functions. One class of repeat protein contains solenoid folds where the repeating unit consists of β-strands separated by tight turns. β-solenoids have distinguishing structural features such as handedness, twist, oligomerisation state, coil shape and size which give rise to their diversity. Characterised β-solenoid repeat proteins are known to form regions in bacterial and viral virulence factors, antifreeze proteins and functional amyloids. For many of these proteins, the experimental structure has not been solved, as they are difficult to crystallise or model. Here we use various deep learning-based structure-modelling methods to discover novel predicted β-solenoids, perform structural database searches to mine further structural neighbours and relate their predicted structure to possible functions. We find both eukaryotic and prokaryotic adhesins, confirming a known functional linkage between adhesin function and the β-solenoid fold. We further identify exceptionally long, flat β-solenoid folds as possible structures of mucin tandem repeat regions and unprecedentedly small β-solenoid structures. Additionally, we characterise a novel β-solenoid coil shape, the FapC Greek key β-solenoid as well as plausible complexes between it and other proteins involved in Pseudomonas functional amyloid fibres.

Mechanism of antifreeze protein functioning and the "anchored clathrate water" concept

In liquid water, there is a natural tendency to form aggregates that consist of water molecules linked by hydrogen bonds. Such spontaneously formed aggregates are surrounded by a "sea" of disordered water molecules, with both forms remaining in equilibrium. The process of creating water aggregates also takes place in the solvation water of proteins, but in this case, the interactions of water molecules with the protein surface shift the equilibrium of the process. In this paper, we analyze the structural properties of the solvation water in antifreeze proteins (AFPs). The results of molecular dynamics analysis with the use of various parameters related to the structure of solvation water on the protein surface are presented. We found that in the vicinity of the active region responsible for the binding of AFPs to ice, the equilibrium is clearly shifted toward the formation of "ice-like aggregates," and the solvation water has a more ordered ice-like structure. We have demonstrated that a reduction in the tendency to create "ice-like aggregates" results in a significant reduction in the antifreeze activity of the protein. We conclude that shifting the equilibrium in favor of the formation of "ice-like aggregates" in the solvation water in the active region is a prerequisite for the biological functionality of AFPs, at least for AFPs having a well-defined ice binding area. In addition, our results fully confirm the validity of the "anchored clathrate water" concept, formulated by Garnham et al. [Proc. Natl. Acad. Sci. U. S. A. 108, 7363 (2011)].

Preferential Ordering and Organization of Hydration Water Favor Nucleation of Ice by Ice-Nucleating Proteins over Antifreeze Proteins

Bacteria containing ice-nucleating proteins (INPs) evolved in nature to nucleate ice at the high sub-zero ambiance. The ability of the INPs to induce order in the hydration layer and their aggregation propensity appear to be key factors of their ice nucleation abilities. However, the mechanism of the process of ice nucleation by INPs is yet to be understood clearly. Here, we have performed all-atom molecular dynamics simulations and analyzed the structure and dynamics of the hydration layer around the proposed ice-nucleating surface of a model INP. Results are compared with the hydration of a topologically similar non-ice-binding protein (non-IBP) and another ice-growth inhibitory antifreeze protein (sbwAFP). We observed that the hydration structure around the ice-nucleating surface of INP is highly ordered and the dynamics of the hydration water are slower, compared to the non-IBP. Even the ordering of the hydration layer is more evident around the ice-binding surface of INP, compared to the antifreeze protein sbwAFP. Particularly with increasing repeat units of INP, we observe an increased population of ice-like water. Interestingly, the distances between the hydroxyl groups of the threonine ladder and its associated channel water of the ice-binding surface (IBS) of INP in the X and Y direction mimic the oxygen atom distances of the basal plane of hexagonal ice. However, the structural synergies between the hydroxyl group distances of the threonine ladder and its associated channel water of the IBS of sbwAFP and oxygen atom distances of the basal plane are less evident. This difference makes the IBS of the INP a better template for ice nucleation than AFP, although both of them bind to the ice surface efficiently.

Engineered Compounds to Control Ice Nucleation and Recrystallization

One of the greatest concerns in the subzero storage of cells, tissues, and organs is the ability to control the nucleation or recrystallization of ice. In nature, evidence of these processes, which aid in sustaining internal temperatures below the physiologic freezing point for extended periods of time, is apparent in freeze-avoidant and freeze-tolerant organisms. After decades of studying these proteins, we now have easily accessible compounds and materials capable of recapitulating the mechanisms seen in nature for biopreser-vation applications. The output from this burgeoning area of research can interact synergistically with other novel developments in the field of cryobiology, making it an opportune time for a review on this topic.

Ice Nucleation Promotion Impact on the Ice Recrystallization Inhibition Activity of Polyols

Heterogeneous ice nucleation occurs vis-à-vis nucleating agents already present in solution yet can occur within a rather broad range of temperatures (0 to ca. -38 °C). Controlling this temperature and the subsequent growth of resulting ice crystals is crucial for the survival of biological organisms (certain insects, fish, and plants that endure subzero temperatures), as well as in the context of medical cryopreservation and food science. In these environments, uncontrolled crystal shape and size can rupture the cell membrane causing irreversible and catastrophic damage. Antifreeze (AF) proteins and synthetic AF analogs address this issue to restrict crystal growth and to shape ice crystals. Yet, if the nucleation temperature is not controlled and occurs in a lower temperature range, nascent ice crystals will have grown to a significantly larger size before the AF agents can be active on their surface to halt or slow the Ostwald ripening process during recrystallization. At a higher nucleation temperature, diffusion of AF macromolecules is enhanced, and dynamic crystal shaping can start earlier, producing smaller crystals overall. While antifreeze proteins, the inspiration for these synthetic analogs, are always applied in a salt buffer aqueous environment (most typically phosphate-buffered saline (PBS) buffer), the heterogeneous nucleation events are stochastic and occur within a wide temperature range. Silver iodide (AgI), however, is a highly effective ice nucleation promoter as its crystal lattice structure is a 98% lattice match to the basal plane of hexagonal ice (Ih) crystals acting as a template for water molecule orientation and decreasing the interfacial free energy. Here, we expose the advantage of purposely seeding such nascent ice crystals with AgI at a defined and higher temperature (-7 °C) in ultrapure water (UPW) such that nucleation can only come from AgI (and also in AgI/PBS), resulting in the most potent synthetic IRI observed to date (at concentrations as low as 0.001 mg·mL^-1).

Protein engineering of antifreeze proteins reveals that their activity scales with the area of the ice-binding site

Antifreeze proteins (AFPs) protect organisms from freezing by binding to ice crystals to prevent their growth. Here, we have investigated how the area of an AFP's ice-binding site (IBS) changes its antifreeze activity. The polyproline type II helical bundle fold of the 9.6-kDa springtail (Collembola) AFP from Granisotoma rainieri (a primitive arthropod) facilitates changes to both IBS length and width. A one quarter decrease in area reduced activity to less than 10%. A one quarter increase in IBS width, through the addition of a single helix, tripled antifreeze activity. However, increasing IBS length by a similar amount actually reduced activity. Expanding the IBS area can greatly increase antifreeze activity but needs to be evaluated by experimentation on a case-by-case basis.

Ice recrystallization inhibition mechanism of zwitterionic poly(carboxybetaine methacrylate)

Understanding the ice recrystallization inhibition (IRI) mechanism is of fundamental importance for the rational design of novel antifreeze protein mimetics and reducing IR-related damage. In this communication, using quantitive experimental methods and molecular dynamics simulations we demonstrate that zwitterionic poly(carboxybetaine methacrylate) (PCBMA) can serve as a novel IRI-active substance. This work unravels the atomic-level details of the IRI mechanism of zwitterionic antifreeze protein mimetics and provides insight into the development of next-generation antifreeze protein mimetics.

Microcurvature Controllable Metal-Organic Framework Nanoagents Capable of Ice-Lattice Matching for Cellular Cryopreservation

Ice-binding proteins (IBPs) produced by psychrophilic organisms to adapt for the survival of psychrophiles in subzero conditions have received illustrious interest as a cryopreservation agent required for cells and tissues to completely recover after freezing/thawing. Depressing water-freezing point and avoiding ice-crystal growth affect their activities which are closely related to the presence of ice crystal well-matched binding moiety. The interaction of IBPs with ice and water is critical in enhancing their freeze avoidance against cell or tissue damage. Metal-organic frameworks (MOFs) with a controllable lattice at the molecular level and a size at the nanometer scale can offer periodically ordered ice-binding sites by modifying organic linkers and controlling microcurvature at the ice surface. Herein, zirconium (Zr)-based MOF-801 nanoparticles (NPs) with good biocompatibility were used as a cryoprotectant that is well dispersed and colloidal-stable in an aqueous solution. The MOF NP size was precisely controlled, and 10, 35, 100, and 250 nm NPs were prepared. The specific IBPs-mimicking pendants (valine and threonine) were simply introduced into the MOF NP-surface through the acrylate-based functionalization to endow with hydrophilic and hydrophobic dualities. When small-sized MOF-801 NPs were attached to ice, they confined ice growth in high curvature between the adsorption sites because of the decreased radius of the convex area of the growth region, leading to highly enhanced ice recrystallization inhibition (IRI). Surface-functionalized MOF NPs could increase the number of anchored clathrate water molecules with hydrophilic/hydrophobic balance of the ice-binding moiety, effectively inhibiting ice growth. The MOF-801 NPs were biocompatible with various cell lines regardless of concentration or NP surface-functionalization, whereas the smaller-sized surface-functionalized NPs showed a good cell recovery rate after freezing/thawing by induction of IRI. This study provides a strategy for the fabrication of low-cost, high-volume antifreeze nanoagents that can extend useful applications to organ transplantation, cord blood storage, and vaccines/drugs.

Control strategies of ice nucleation, growth, and recrystallization for cryopreservation

The cryopreservation of biomaterials is fundamental to modern biotechnology and biomedicine, but the biggest challenge is the formation of ice, resulting in fatal cryoinjury to biomaterials. To date, abundant ice control strategies have been utilized to inhibit ice formation and thus improve cryopreservation efficiency. This review focuses on the mechanisms of existing control strategies regulating ice formation and the corresponding applications to biomaterial cryopreservation, which are of guiding significance for the development of ice control strategies. Herein, basics related to biomaterial cryopreservation are introduced first. Then, the theoretical bases of ice nucleation, growth, and recrystallization are presented, from which the key factors affecting each process are analyzed, respectively. Ice nucleation is mainly affected by melting temperature, interfacial tension, shape factor, and kinetic prefactor, and ice growth is mainly affected by solution viscosity and cooling/warming rate, while ice recrystallization is inhibited by adsorption or diffusion mechanisms. Furthermore, the corresponding research methods and specific control strategies for each process are summarized. The review ends with an outlook of the current challenges and future perspectives in cryopreservation. STATEMENT OF SIGNIFICANCE: Ice formation is the major limitation of cryopreservation, which causes fatal cryoinjury to cryopreserved biomaterials. This review focuses on the three processes related to ice formation, called nucleation, growth, and recrystallization. The theoretical models, key influencing factors, research methods and corresponding ice control strategies of each process are summarized and discussed, respectively. The systematic introduction on mechanisms and control strategies of ice formation is instructive for the cryopreservation development.

Molecular Factors of Ice Growth Inhibition for Hyperactive and Globular Antifreeze Proteins: Insights from Molecular Dynamics Simulation

The molecular mechanism behind the ice growth inhibition by antifreeze proteins (AFPs) is yet to be understood completely. Also, what physical parameters differentiate between the AFP and non-AFP are largely unknown. Thus, to get an atomistic overview of the differential antifreeze activities of different classes of AFPs, we have studied ice growth from different ice surfaces in the presence of a moderately active globular type III AFP and a hyperactive spruce budworm (sbw) AFP. Results are compared with the observations of ice growth simulations in the presence of topologically similar non-AFPs using all-atom molecular dynamics simulations. Simulation data suggest that the ice surface coverage is a critical factor in ice growth inhibition. Due to the presence of an ice binding surface (IBS), AFPs form a high affinity complex with ice, accompanied by a transition of hydration water around the IBS from clathrate-like to ice-like. Several residues around the periphery of the IBS anchor the AFP to the curved ice surface mediated by multiple strong hydrogen bonds, stabilizing the complex immensely. In the high surface coverage regime, the slow unbinding kinetics dominates over the ice growth kinetics and thus facilitates the ice growth inhibition. Due to the non-availability of a proper IBS, non-AFPs form a low-affinity complex with the growing ice surface. As a result, the non-AFPs are continuously repelled by the surface. If the concentration of AFPs is low, then the effective surface coverage is reduced significantly. In this low surface coverage regime, AFPs can also behave like impurities and are engulfed by the growing ice crystal.

Poly(vinyl alcohol) Molecular Bottlebrushes Nucleate Ice

Ice binding proteins (IBP) have evolved to limit the growth of ice but also to promote ice formation by ice-nucleating proteins (INPs). IBPs, which modulate these seemingly distinct processes, often have high sequence similarities, and molecular size/assembly is hypothesized to be a crucial determinant. There are only a few synthetic materials that reproduce INP function, and rational design of ice nucleators has not been achieved due to outstanding questions about the mechanisms of ice binding. Poly(vinyl alcohol) (PVA) is a water-soluble synthetic polymer well known to effectively block ice recrystallization, by binding to ice. Here, we report the synthesis of a polymeric ice nucleator, which mimics the dense assembly of IBPs, using confined ice-binding polymers in a high-molar-mass molecular bottlebrush. Poly(vinyl alcohol)-based molecular bottlebrushes with different side-chain densities were synthesized via a combination of ring-opening metathesis polymerization (ROMP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, using "grafting-to" and "grafting-through" approaches. The facile preparation of the PVA bottlebrushes was performed via selective hydrolysis of the acetate of the poly(vinyl acetate) (PVAc) side chains of the PVAc bottlebrush precursors. Ice-binding polymer side-chain density was shown to be crucial for nucleation activity, with less dense brushes resulting in colder nucleation than denser brushes. This bio-inspired approach provides a synthetic framework for probing heterogeneous ice nucleation and a route toward defined synthetic nucleators for biotechnological applications.

Oriented attachment kinetics for rod-like particles at a flat surface: Buffon's needle at the nanoscale

The adsorption of large rod-like molecules or crystallites on a flat crystal face, similar to Buffon's needle, requires the rods to "land," with their binding sites in precise orientational alignment with matching sites on the surface. An example is provided by long, helical antifreeze proteins (AFPs), which bind at specific facets and orientations on the ice surface. The alignment constraint for adsorption, in combination with the loss in orientational freedom as the molecule diffuses toward the surface, results in an entropic barrier that hinders the adsorption. Prior kinetic models do not factor in the complete geometry of the molecule, nor explicitly enforce orientational constraints for adsorption. Here, we develop a diffusion-controlled adsorption theory for AFP molecules binding at specific orientations to flat ice surfaces. We formulate the diffusion equation with relevant boundary conditions and present analytical solutions to the attachment rate constant. The resulting rate constant is a function of the length and aspect ratio of the AFP, the distance threshold associated with binding, and solvent conditions such as temperature and viscosity. These results and methods of calculation may also be useful for predicting the kinetics of crystal growth through oriented attachment.

Peptide-DNA origami as a cryoprotectant for cell preservation

Cryopreservation of cells is essential for the conservation and cold chain of bioproducts and cell-based medicines. Here, we demonstrate that self-assembled DNA origami nanostructures have a substantial ability to protect cells undergoing freeze-thaw cycles; thereby, they can be used as cryoprotectant agents, because their nanoscale morphology and ice-philicity are tailored. In particular, a single-layered DNA origami nanopatch functionalized with antifreezing threonine peptides enabled the viability of HSC-3 cells to reach 56% after 1 month of cryopreservation, surpassing dimethyl sulfoxide, which produced 38% viability. It also exhibited minimal dependence on the cryopreservation period and freezing conditions. We attribute this outcome to the fact that the peptide-functionalized DNA nanopatches exert multisite actions for the retardation of ice growth in both intra- and extracellular regions and the protection of cell membranes during cryopreservation. This discovery is expected to deepen our fundamental understanding of cell survival under freezing environment and affect current cryopreservation technologies.

Bioinspired Threonine-Based Polymers with Potent Ice Recrystallization Inhibition Activity

Ice growth mitigation is a pervasive challenge for multiple industries. In nature, ice-binding proteins (IBPs) demonstrate potent ice growth prevention through ice recrystallization inhibition (IRI). However, IBPs are expensive, difficult to produce in large quantities, and exhibit minimal resilience to nonphysiological environmental stressors, such as pH. For these reasons, researchers have turned to bioinspired polymeric materials that mimic IBP behavior. To date, however, no synthetic polymer has rivaled the ability of native IBPs to display IRI activity at ultralow nanomolar concentrations. In this work, we study the IRI activity of peptides and polypeptides inspired by common ice-binding residues of IBPs to inform the synthesis and characterization of a potent bioinspired polymer that mimics IBP behavior. We show first that the threonine polypeptide (pThr) displays the best IRI activity in phosphate-buffered saline (PBS). Second, we use pThr as a molecular model to synthesize and test a bioinspired polymer, poly(2-hydroxypropyl methacrylamide) (pHPMA). We show that pHPMA exhibits potent IRI activity in neutral PBS at ultralow concentrations (0.01 mg/mL). pHPMA demonstrates potent IRI activity at low molecular weights (2.3 kDa), with improved activity at higher molecular weights (32.8 kDa). These results substantiate that pHPMA is a robust molecule that mitigates ice crystal growth at concentrations similar to native IBPs.

Adsorption of ice-binding proteins onto whole ice crystal surfaces does not necessarily confer a high thermal hysteresis activity

Many psychrophilic microorganisms synthesize ice-binding proteins (IBPs) to survive the cold. The functions of IBPs are evaluated by the effect of the proteins on the nonequilibrium water freezing-point depression, which is called “thermal hysteresis (TH)”, and the inhibitory effect of the proteins on the growth of larger ice crystals, which is called “ice recrystallization inhibition (IRI)”. To obtain mechanical insight into the two activities, we developed a modified method of ice affinity purification and extracted two new IBP isoforms from Psychromyces glacialis, an Arctic glacier fungus. One isoform was found to be an approximately 25 kDa protein (PsgIBP_S), while the other is a 28 kDa larger protein (PsgIBP_L) that forms an intermolecular dimer. Their TH activities were less than 1 °C at millimolar concentrations, implying that both isoforms are moderately active but not hyperactive IBP species. It further appeared that both isoforms exhibit high IRI activity even at submicromolar concentrations. Furthermore, the isoforms can bind to the whole surface of a hemispherical single ice crystal, although such ice-binding was generally observed for hyperactive IBP species. These results suggest that the binding ability of IBPs to whole ice crystal surfaces is deficient for hyperactivity but is crucial for significant IRI activity.

Bioinspired Freeze-Tolerant Soft Materials: Design, Properties, and Applications

In nature, many biological organisms have developed the exceptional antifreezing ability to survive in extremely cold environments. Inspired by the freeze resistance of these organisms, researchers have devoted extensive efforts to develop advanced freeze-tolerant soft materials and explore their potential applications in diverse areas such as electronic skin, soft robotics, flexible energy, and biological science. Herein, a comprehensive overview on the recent advancement of freeze-tolerant soft materials and their emerging applications from the perspective of bioinspiration and advanced material engineering is provided. First, the mechanisms underlying the freeze tolerance of cold-enduring biological organisms are introduced. Then, engineering strategies for developing antifreezing soft materials are summarized. Thereafter, recent advances in freeze-tolerant soft materials for different technological applications such as smart sensors and actuators, energy harvesting and storage, and cryogenic medical applications are presented. Finally, future challenges and opportunities for the rapid development of bioinspired freeze-tolerant soft materials are discussed.

Water-organizing motif continuity is critical for potent ice nucleation protein activity

Bacterial ice nucleation proteins (INPs) can cause frost damage to plants by nucleating ice formation at high sub-zero temperatures. Modeling of Pseudomonas borealis INP by AlphaFold suggests that the central domain of 65 tandem sixteen-residue repeats forms a beta-solenoid with arrays of outward-pointing threonines and tyrosines, which may organize water molecules into an ice-like pattern. Here we report that mutating some of these residues in a central segment of P. borealis INP, expressed in Escherichia coli, decreases ice nucleation activity more than the section’s deletion. Insertion of a bulky domain has the same effect, indicating that the continuity of the water-organizing repeats is critical for optimal activity. The ~10 C-terminal coils differ from the other 55 coils in being more basic and lacking water-organizing motifs; deletion of this region eliminates INP activity. We show through sequence modifications how arrays of conserved motifs form the large ice-nucleating surface required for potency.

Ice nucleation proteins have the same tandemly arrayed water-organizing motifs seen in some antifreeze proteins, but on a larger scale. The authors show that mutation, interruption, and truncation of these arrays reduce ice nucleation activity indicating that the two protein types share a common mechanism.

A mutation to a fish ice-binding protein synthesized in transgenic Caenorhabditis elegans modulate its cold tolerance

A cryoprotectant known as ice-binding protein (IBP) is thought to facilitate the cold survival of plants, insects, and fungi. Here, we prepared a genetically modified Caenorhabditis elegans strain to synthesize fish-derived IBPs in its body wall muscles and examined whether the antifreeze activity modification of this IBP by point mutation affects the cold tolerance of this worm. We chose a 65-residue IBP identified from notched-fin eelpout, for which the replacement of the 20th alanine residue (A20) modifies its antifreeze activity. These mutant proteins are denoted A20L, A20G, A20T, A20V, and A20I along with the wild-type (WT) protein. We evaluated the survival rate (%) of the transgenic C. elegans that synthesized each IBP mutant following 24 h of preservation at -5, +2, and +5 °C. Significantly, a dramatic improvement in the survival rate was detected for the worms synthesizing the activity-enhanced mutants (A20T and A20I), especially at +2 °C. In contrast, the rate was not improved by the expression of the defective mutants (A20L, A20G, WT and A20V). The survival rate (%) probably correlates with the antifreeze activity of the IBP. These data suggest that IBP protects the cell membrane by employing its ice-binding mechanism, which ultimately improves the cold tolerance of an IBP-containing animal.

Engineering Agrobacterium tumefaciens Adhesion to Target Cells

Agrobacterium tumefaciens is a plant pathogen commonly repurposed for genetic modification of crops. Despite its versatility, it remains inefficient at transferring DNA to many hosts, including to animal cells. Like many pathogens, physical contact between A. tumefaciens and host cells promotes infection efficacy. Thus, improving the strength and specificity of A. tumefaciens to target cells has the potential for enhancing DNA transfer for biotechnological and therapeutic purposes. Here, we demonstrate a methodology for engineering genetically encoded exogeneous adhesins at the surface of A. tumefaciens. We identified an autotransporter gene we named Aat that is predicted to show canonical β-barrel and passenger domains. We engineered the β-barrel scaffold and linker (Aat_β) to display synthetic adhesins susceptible to rewire A. tumefaciens to alternative host targets. As a proof of concept, we leveraged the versatility of a VHH domain to rewire A. tumefaciens adhesion to yeast and mammalian hosts displaying a GFP target receptor. Finally, to demonstrate how synthetic A. tumefaciens adhesion can improve transfer to host cells, we showed improved protein translocation into HeLa cells using a sensitive split luciferase reporter system. Engineering A. tumefaciens adhesion has therefore a strong potential in generating complex heterogeneous cellular assemblies and in improving DNA transfer efficiency against non-natural hosts.

Antifreezing Hydroxyl Monolayer of Small Molecules on a Nanogold Surface

The rational design of ice recrystallization inhibition (IRI) materials is challenging due to the poor understanding of the IRI mechanism at the molecular level. Here we report several new findings about IRI. (1) A dense hydroxyl monolayer of small molecules, e.g. 6-aza-2-thiothymine (ATT), adsorbed on a nanogold surface was demonstrated, for the first time, to have IRI activity. Five structural analogues adsorbed on groups nanogold with outward hydroxyl or methyl were created to evidence the origin of IRI activity. (2) Their IRI mechanism is closely related to the density of hydroxyls on a nanogold surface. However, the hydrophobic interaction in our model is not essential for macroscopic IRI activity. (3) A molecular dynamics simulation elucidates the hydroxyl density dependent IRI trajectories underlying the experimental observations, and the radial distribution function reveals that the methyl even slightly hinders the formation of hydrogen bonding due to a hydrophobic interaction. This work sheds more light on the IRI mechanism that should help in the customization of novel IRI materials.

Structure and Protein-Protein Interactions of Ice Nucleation Proteins Drive Their Activity

Microbially-produced ice nucleating proteins (INpro) are unique molecular structures with the highest known catalytic efficiency for ice formation. Airborne microorganisms utilize these proteins to enhance their survival by reducing their atmospheric residence times. INpro also have critical environmental effects including impacts on the atmospheric water cycle, through their role in cloud and precipitation formation, as well as frost damage on crops. INpro are ubiquitously present in the atmosphere where they are emitted from diverse terrestrial and marine environments. Even though bacterial genes encoding INpro have been discovered and sequenced decades ago, the details of how the INpro molecular structure and oligomerization foster their unique ice-nucleation activity remain elusive. Using machine-learning based software AlphaFold 2 and trRosetta, we obtained and analysed the first ab initio structural models of full length and truncated versions of bacterial INpro. The modeling revealed a novel beta-helix structure of the INpro central repeat domain responsible for ice nucleation activity. This domain consists of repeated stacks of two beta strands connected by two sharp turns. One beta-strand is decorated with a TxT amino acid sequence motif and the other strand has an SxL[T/I] motif. The core formed between the stacked beta helix-pairs is unusually polar and very distinct from previous INpro models. Using synchrotron radiation circular dichroism, we validated the β-strand content of the central repeat domain in the model. Combining the structural model with functional studies of purified recombinant INpro, electron microscopy and modeling, we further demonstrate that the formation of dimers and higher-order oligomers is key to INpro activity. Using computational docking of the new INpro model based on rigid-body algorithms we could reproduce a previously proposed homodimer structure of the INpro CRD with an interface along a highly conserved tyrosine ladder and show that the dimer model agrees with our functional data. The parallel dimer structure creates a surface where the TxT motif of one monomer aligns with the SxL[T/I] motif of the other monomer widening the surface that interacts with water molecules and therefore enhancing the ice nucleation activity. This work presents a major advance in understanding the molecular foundation for bacterial ice-nucleation activity.

Seasonality of Glacial Snow and Ice Microbial Communities

Blooms of microalgae on glaciers and ice sheets are amplifying surface ice melting rates, which are already affected by climate change. Most studies on glacial microorganisms (including snow and glacier ice algae) have so far focused on the spring and summer melt season, leading to a temporal bias, and a knowledge gap in our understanding of the variations in microbial diversity, productivity, and physiology on glacier surfaces year-round. Here, we investigated the microbial communities from Icelandic glacier surface snow and bare ice habitats, with sampling spanning two consecutive years and carried out in both winter and two summer seasons. We evaluated the seasonal differences in microbial community composition using Illumina sequencing of the 16S rRNA, 18S rRNA, and ITS marker genes and correlating them with geochemical signals in the snow and ice. During summer, Chloromonas, Chlainomonas, Raphidonema, and Hydrurus dominated surface snow algal communities, while Ancylonema and Mesotaenium dominated the surface bare ice habitats. In winter, algae could not be detected, and the community composition was dominated by bacteria and fungi. The dominant bacterial taxa found in both winter and summer samples were Bacteriodetes, Actinobacteria, Alphaproteobacteria, and Gammaproteobacteria. The winter bacterial communities showed high similarities to airborne and fresh snow bacteria reported in other studies. This points toward the importance of dry and wet deposition as a wintertime source of microorganisms to the glacier surface. Winter samples were also richer in nutrients than summer samples, except for dissolved organic carbon-which was highest in summer snow and ice samples with blooming microalgae, suggesting that nutrients are accumulated during winter but primarily used by the microbial communities in the summer. Overall, our study shows that glacial snow and ice microbial communities are highly variable on a seasonal basis.

Reflections on antifreeze proteins and their evolution

The discovery of radically different antifreeze proteins (AFPs) in fishes during the 1970s and 1980s suggested that these proteins had recently and independently evolved to protect teleosts from freezing in icy seawater. Early forays into the isolation and characterization of AFP genes in these fish showed they were massively amplified, often in long tandem repeats. The work of many labs in the 1980s onward led to the discovery and characterization of AFPs in other kingdoms, such as insects, plants, and many different microorganisms. The distinct ice-binding property that these ice-binding proteins (IBPs) share has facilitated their purification through adsorption to ice, and the ability to produce recombinant versions of IBPs has enabled their structural characterization and the mapping of their ice-binding sites (IBSs) using site-directed mutagenesis. One hypothesis for their ice affinity is that the IBS organizes surface waters into an ice-like pattern that freezes the protein onto ice. With access now to a rapidly expanding database of genomic sequences, it has been possible to trace the origins of some fish AFPs through the process of gene duplication and divergence, and to even show the horizontal transfer of an AFP gene from one species to another.

Do antifreeze proteins generally possess the potential to promote ice growth?

The binding of antifreeze proteins (AFPs) to ice needs to be mediated by interfacial water molecules. Our previous study of the effect of AFPs on the dynamics of the interfacial water of freezing at its initial stage has shown that AFPs can promote the growth of ice before binding to it. However, whether different AFPs can promote the freezing of water molecules on the basal and the prismatic surfaces of ice still needs further study. In the present contribution, five representative natural AFPs with different structures and different activities that can be adsorbed on the basal and/or prismatic surfaces of ice are investigated at the atomic level. Our results show that the phenomenon of promoting the growth of ice crystals is not universal. Only hyperactive AFPs (hypAFPs) can promote the growth of the basal plane of ice, while moderately active AFPs cannot. Moreover, this significant promotion is not observed on the prismatic plane regardless of their activity. Further analysis indicates that this promotion may result from the thicker ice/water interface of the basal plane, and the synergy of hypAFPs with ice crystals.

Adaptation Potential of Three Psychrotolerant Aquatic Bacteria in the Pan-Okhotsk Region

The Pan-Okhotsk region, which is part of the western North Pacific Ocean, is famous for its active volcanoes, which are part of the Pacific Ring of Fire and that enrich the surrounding waters with essential chemicals. Therefore, this region, including the Sea of Okhotsk and the Sea of Japan, is characterized by rich biota. Bacterioplankton plays a significant part in biological communities and is an indicator of ecosystem function. Analyzing the adaptability of three representatives of the microbiota of the Pan-Okhotsk region was the goal of our investigation. Marinomonas primoryensis KMM3633T (MP), Yersinia ruckeri KMM821 (YR), and Yersinia pseudotuberculosis 598 (YP) from the G.B. Elyakov Pacific Institute of Bioorganic Chemistry were studied by means of genomic and bioinformatic methods. The list of membrane translocator proteins, metabolism pathways, and cold shock and antifreeze proteins that were revealed in the genome of MP characterized this bacterium as being adaptable to free living in marine conditions, even at winter temperatures. The genomic potential of YR and YP makes not only survival in the environment of the Pan-Okhotsk region but also pathogenesis in eukaryotic organisms possible. The data obtained will serve as a basis for further ecosystem monitoring with the help of microbiota research.

Bioinspired Ice-Binding Materials for Tissue and Organ Cryopreservation

Cryopreservation of tissues and organs can bring transformative changes to medicine and medical science. In the past decades, limited progress has been achieved, although cryopreservation of tissues and organs has long been intensively pursued. One key reason is that the cryoprotective agents (CPAs) currently used for cell cryopreservation cannot effectively preserve tissues and organs because of their cytotoxicity and tissue destructive effect as well as the low efficiency in controlling ice formation. In stark contrast, nature has its unique ways of controlling ice formation, and many living organisms can effectively prevent freezing damage. Ice-binding proteins (IBPs) are regarded as the essential materials identified in these living organisms for regulating ice nucleation and growth. Note that controversial results have been reported on the utilization of IBPs and their mimics for the cryopreservation of tissues and organs, that is, some groups revealed that IBPs and mimics exhibited unique superiorities in tissues cryopreservation, while other groups showed detrimental effects. In this perspective, we analyze possible reasons for the controversy and predict future research directions in the design and construction of IBP inspired ice-binding materials to be used as new CPAs for tissue cryopreservation after briefly introducing the cryo-injuries and the challenges of conventional CPAs in the cryopreservation of tissues and organs.

Ice Recrystallization Inhibition by Amino Acids: The Curious Case of Alpha- and Beta-Alanine

Extremophiles produce macromolecules which inhibit ice recrystallization, but there is increasing interest in discovering and developing small molecules that can modulate ice growth. Realizing their potential requires an understanding of how these molecules function at the atomistic level. Here, we report the discovery that the amino acid l-α-alanine demonstrates ice recrystallization inhibition (IRI) activity, functioning at 100 mM (∼10 mg/mL). We combined experimental assays with molecular simulations to investigate this IRI agent, drawing comparison to β-alanine, an isomer of l-α-alanine which displays no IRI activity. We found that the difference in the IRI activity of these molecules does not originate from their ice binding affinity, but from their capacity to (not) become overgrown, dictated by the degree of structural (in)compatibility within the growing ice lattice. These findings shed new light on the microscopic mechanisms of small molecule cryoprotectants, particularly in terms of their molecular structure and overgrowth by ice.

An insect antifreeze protein from Anatolica polita enhances the cryoprotection of Xenopus laevis eggs and embryos

Cryoprotection is of interest in many fields of research, necessitating a greater understanding of different cryoprotective agents. Antifreeze proteins have been identified that have the ability to confer cryoprotection in certain organisms. Antifreeze proteins are an evolutionary adaptation that contributes to the freeze resistance of certain fish, insects, bacteria and plants. These proteins adsorb to an ice crystal's surface and restrict its growth within a certain temperature range. We investigated the ability of an antifreeze protein from the desert beetle Anatolica polita, ApAFP752, to confer cryoprotection in the frog Xenopus laevis. Xenopus laevis eggs and embryos microinjected with ApAFP752 exhibited reduced damage and increased survival after a freeze-thaw cycle in a concentration-dependent manner. We also demonstrate that ApAFP752 localizes to the plasma membrane in eggs and embryonic blastomeres and is not toxic for early development. These studies show the potential of an insect antifreeze protein to confer cryoprotection in amphibian eggs and embryos.

Importance of rigidity of ice-binding protein (FfIBP) for hyperthermal hysteresis activity and microbial survival

Ice-binding proteins (IBPs) are well-characterized proteins responsible for the cold-adaptation mechanisms. Despite extensive structural and biological investigation of IBPs and antifreeze proteins, only a few studies have considered the relationship between protein stabilization and thermal hysteresis (TH) activity as well as the implication of hyperactivity. Here, we investigated the important role of the head capping region in stabilization and the hyper-TH activity of FfIBP using molecular dynamics simulation. Data comparison revealed that residues on the ice-binding site of the hyperactive FfIBP are immobilized, which could be correlated with TH activity. Further comparison analysis indicated the disulfide bond in the head region is mainly involved in protein stabilization and is crucial for hyper-TH activity. This finding could also be generalized to known hyperactive IBPs. Furthermore, in mimicking the physiological conditions, bacteria with membrane-anchored FfIBP formed brine pockets in a TH activity-dependent manner. Cells with a higher number of TH-active IBPs showed an increased number of brine pockets, which may be beneficial for short- and long-term survival in cold environments by reducing the salt concentration. The newly identified conditions for hyper-TH activity and their implications on bacterial survival provide insights into novel mechanistic aspects of cold adaptation in polar microorganisms.

Kinetic Inhibition of Clathrate Hydrate by Copolymers Based on N-Vinylcaprolactam and N-Acryloylpyrrolidine: Optimization Effect of Interfacial Nonfreezable Water of Polymers

Amphiphilic polymers have now been designed to achieve an icephobic performance and have been used for ice adhesion prevention. They may function by forming a strongly bonded but nonfreezable water shell which serves as a self-lubricating interfacial layer that weakens the adhesion strength between ice and the surface. Here, an analogous concept is built to prevent the formation of clathrate hydrate compounds during oil and natural gas production, in which amphiphilic water-soluble polymers act as efficient kinetic hydrate inhibitors (KHIs). A novel group of copolymers with N-vinylcaprolactam and N-acryloylpyrrolidine structural units are investigated in this study. The relationships among the amphiphilicity, lower critical solution temperature, nonfreezable bound water, and kinetic hydrate inhibition time are analyzed in terms of the copolymer compositions. Low-field NMR relaxometry revealed the crucial interfacial water in tightly bound dynamic states which led to crystal growth rates changing with the copolymer compositions, in accord with the rotational rheometric analysis results. The nonfreezable bound water layer confirmed by a calorimetry analysis also changes with the polymer amphiphilicity. Therefore, in the interface between the KHI polymers and hydrate, water surrounding the polymers plays a critical role by helping to delay the nucleation and growth of embryonic ice/hydrates. Appropriate amphiphilicity of the copolymers can achieve the optimal interfacial properties for slowing down hydrate crystal growth.

Structural diversity of marine anti-freezing proteins, properties and potential applications: a review

Cold-adapted organisms, such as fishes, insects, plants and bacteria produce a group of proteins known as antifreeze proteins (AFPs). The specific functions of AFPs, including thermal hysteresis (TH), ice recrystallization inhibition (IRI), dynamic ice shaping (DIS) and interaction with membranes, attracted significant interest for their incorporation into commercial products. AFPs represent their effects by lowering the water freezing point as well as preventing the growth of ice crystals and recrystallization during frozen storage. The potential of AFPs to modify ice growth results in ice crystal stabilizing over a defined temperature range and inhibiting ice recrystallization, which could minimize drip loss during thawing, improve the quality and increase the shelf-life of frozen products. Most cryopreservation studies using marine-derived AFPs have shown that the addition of AFPs can increase post-thaw viability. Nevertheless, the reduced availability of bulk proteins and the need of biotechnological techniques for industrial production, limit the possible usage in foods. Despite all these drawbacks, relatively small concentrations are enough to show activity, which suggests AFPs as potential food additives in the future. The present work aims to review the results of numerous investigations on marine-derived AFPs and discuss their structure, function, physicochemical properties, purification and potential applications.

Inhibition of Ice Recrystallization by Nanotube-Forming Cyclic Peptides

While most native ice-binding proteins are rigid, artificial (macro)molecular ice-binders are usually flexible. Realizing a regular array with precisely positioned ice-binding motifs on synthetic proteins, (macro)molecular ice-binders are thus challenging. Here, we exploit the predictable assembly of cyclic peptides into nanotubes as a starting point to prepare large, rigid ice-binders bearing an ice-binding site that is found in hyperactive ice-binding proteins in insects. First, we designed, synthesized, and purified cyclic octapeptide Lys2CP8 bearing a TaT motif to promote ice binding and investigated their solution assembly and activity using circular dichroism (CD) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, light scattering (LS), cryogenic transmission electron microscopy (cryo-TEM), and ice recrystallization inhibition (IRI) assays. The cyclic peptide Lys2CP8 was synthesized in good yield using Fmoc chemistry and purified by reversed-phase HPLC. Upon dissolution in aqueous solutions, Lys2CP8 was observed to assemble in a pH- and concentration-dependent manner into objects with nanoscopic dimensions. LS revealed the presence of small and large aggregates at pH 3 and 11, held together through a network of intermolecular antiparallel β-sheets as determined by FTIR and CD spectroscopy. Cryo-TEM revealed the presence of one-dimensional objects at pH 3 and 11. These are mostly well-dispersed at pH 3 but appear to bundle at pH 11. Interestingly, the pH-dependent self-assembly behavior translates into a marked pH dependence of IRI activity. Lys2CP8 is IRI-active at pH 3 while inactive at pH 11 hypothetically because the ice-binding sites are inaccessible at pH 11 due to bundling.

Site-Specific Water Dynamics in the First Hydration Layer of an Anti-Freeze Glyco-Protein: A Simulation Study

Antifreeze glycoproteins (AFGPs) inhibit ice recrystallization by a mechanism remaining largely elusive. Dynamics of AFGPs’ hydration water and its involvement in the antifreeze activity, for instance, have not been identified...

Temperature-Dependent Liquid Water Structure for Individual Micron-Sized, Supercooled Aqueous Droplets with Inclusions

Herein, we measure the water structure for individual micron-sized droplets of water, salt water, and water containing biologically and marine relevant atmospheric inclusions as a function of temperature. Individual droplets, formed on a hydrophobic substrate, are analyzed with micro-Raman spectroscopy. Analysis of the Raman spectra in the O-H stretching region shows that the equilibrium of partially and fully hydrogen-bonding water interactions change as temperature decreases up until there is a phase transition to form ice. Using these temperature-dependent measurements, the thermodynamic parameters for the interchange between partially and fully hydrogen-bonded water (PHW ⇄ FHW) for different supercooled droplets (water, salt water, and water containing biologically and marine relevant atmospheric inclusions) have been determined.