Intermediate states of molecular self-assembly from liquid-cell electron microscopy

Nanopipette dynamic microscopy unveils nano coffee ring

Liquid-phase electron microscopy (LP-EM) imaging has revolutionized our understanding of nanosynthesis and assembly. However, the current closed geometry limits its application for open systems. The ubiquitous physical process of the coffee-ring phenomenon that underpins materials and engineering science remains elusive at the nanoscale due to the lack of experimental tools. We introduce a quartz nanopipette liquid cell with a tunable dimension that requires only standard microscopes. Depending on the imaging condition, the open geometry of the nanopipette allows the imaging of evaporation-induced pattern formation, but it can also function as an ordinary closed-geometry liquid cell where evaporation is negligible despite the nano opening. The nano coffee-ring phenomenon was observed by tracking individual nanoparticles in an evaporating nanodroplet created from a thin liquid film by interfacial instability. Nanoflows drive the assembly and disruption of a ring pattern with the absence of particle-particle correlations. With surface effects, nanoflows override thermal fluctuations at tens of nanometers, in which nanoparticles displayed a "drunken man trajectory" and performed work at a value much smaller than kBT.

Electron videography of a lipid-protein tango

Biological phenomena, from enzymatic catalysis to synaptic transmission, originate in the structural transformations of biomolecules and biomolecular assemblies in liquid water. However, directly imaging these nanoscopic dynamics without probes or labels has been a fundamental methodological challenge. Here, we developed an approach for "electron videography"-combining liquid phase electron microscopy with molecular modeling-with which we filmed the nanoscale structural fluctuations of individual, suspended, and unlabeled membrane protein nanodiscs in liquid. Systematic comparisons with biochemical data and simulation indicate the graphene encapsulation involved can afford sufficiently reduced effects of the illuminating electron beam for these observations to yield quantitative fingerprints of nanoscale lipid-protein interactions. Our results suggest that lipid-protein interactions delineate dynamically modified membrane domains across unexpectedly long ranges. Moreover, they contribute to the molecular mechanics of the nanodisc as a whole in a manner specific to the protein within. Overall, this work illustrates an experimental approach to film, quantify, and understand biomolecular dynamics at the nanometer scale.

Single-Molecule Graphene Liquid Cell Electron Microscopy for Instability of Intermediate Amyloid Fibrils

Single-molecule techniques are powerful microscopy methods that provide new insights into biological processes. Liquid-phase transmission electron microscopy (LP-TEM) is an ideal single-molecule technique for overcoming the poor spatiotemporal resolution of optical approaches. However, single-molecule LP-TEM is limited by several challenges such as electron-beam-induced molecular damage, difficulty in identifying biomolecular species, and a lack of analytical approaches for conformational dynamics. Herein, a single-molecule graphene liquid-cell TEM (GLC-TEM) technique that enables the investigation of real-time structural perturbations of intact amyloid fibrils is presented. It is demonstrated that graphene membranes significantly extend the observation period of native amyloid beta proteins without causing oxidative damage owing to electron beams, which is necessary for imaging. Stochastic and time-resolved investigations of single fibrils reveal that structural perturbations in the early fibrillar stage are responsible for the formation of various amyloid polymorphs. The advantage of observing structural behavior in real time with unprecedented resolution will potentially make GLC-TEM a complementary approach to other single-molecule techniques.

The ergodicity question when imaging DNA conformation using liquid cell electron microscopy

Assessing the ergodicity of graphene liquid cell electron microscope measurements, we report that loop states of circular DNA interconvert reversibly and that loop numbers follow the Boltzmann distribution expected for this molecule in bulk solution, provided that the electron dose is low (80-keV electron energy and electron dose rate 1-20 e- Å-2 s-1). This imaging technique appears to act as a "slow motion" camera that reveals equilibrated distributions by imaging the time average of a few molecules without the need to image a spatial ensemble.

Mechanisms of Biomolecular Self-Assembly Investigated Through In Situ Observations of Structures and Dynamics

Biomolecular self-assembly of hierarchical materials is a precise and adaptable bottom-up approach to synthesizing across scales with considerable energy, health, environment, sustainability, and information technology applications. To achieve desired functions in biomaterials, it is essential to directly observe assembly dynamics and structural evolutions that reflect the underlying energy landscape and the assembly mechanism. This review will summarize the current understanding of biomolecular assembly mechanisms based on in situ characterization and discuss the broader significance and achievements of newly gained insights. In addition, we will also introduce how emerging deep learning/machine learning-based approaches, multiparametric characterization, and high-throughput methods can boost the development of biomolecular self-assembly. The objective of this review is to accelerate the development of in situ characterization approaches for biomolecular self-assembly and to inspire the next generation of biomimetic materials.

Visualizing the multi-level assembly structures of conjugated molecular systems with chain-length dependent behavior

It remains challenging to understand the structural evolution of conjugated polymers from single chains to solvated aggregates and film microstructures, although it underpins the performance of optoelectrical devices fabricated via the mainstream solution processing method. With several ensemble visual measurements, here we unravel the morphological evolution process of a model system of isoindigo-based conjugated molecules, including the hidden molecular assembly pathways, the mesoscale network formation, and their unorthodox chain dependence. Short chains show rigid chain conformations forming discrete aggregates in solution, which further grow to form a highly ordered film that exhibits poor electrical performance. In contrast, long chains exhibit flexible chain conformations, creating interlinked aggregates networks in solution, which are directly imprinted into films, forming interconnective solid-state microstructure with excellent electrical performance. Visualizing multi-level assembly structures of conjugated molecules provides a deep understanding of the inheritance of assemblies from solution to solid-state, accelerating the optimization of device fabrication.

Real-time imaging of sulfhydryl single-stranded DNA aggregation

The structure and functionality of biomacromolecules are often regulated by chemical bonds, however, the regulation process and underlying mechanisms have not been well understood. Here, by using in situ liquid-phase transmission electron microscopy (LP-TEM), we explored the function of disulfide bonds during the self-assembly and structural evolution of sulfhydryl single-stranded DNA (SH-ssDNA). Sulfhydryl groups could induce self-assembly of SH-ssDNA into circular DNA containing disulfide bonds (SS-cirDNA). In addition, the disulfide bond interaction triggered the aggregation of two SS-cirDNA macromolecules along with significant structural changes. This visualization strategy provided structure information at nanometer resolution in real time and space, which could benefit future biomacromolecules research.

Random but limited pressure of graphene liquid cells

Even though many researchers have used graphene liquid cells for atomic-resolution observation of liquid samples in the last decade, no one has yet simultaneously measured their three-dimensional shape and pressure. In this study, we have done so with an atomic force microscope, for cells with base radii of 20-134 nm and height of 3.9-21.2 nm. Their inner pressure ranged from 1.0 to 63 MPa but the maximum value decreased as the base radius increased. We discuss the mechanism that results in this inverse relationship by introducing an adhesive force between the graphene membranes. Also, the sample preparation procedure used in this experiment is highly reproducible and transferable to a wide variety of substrates.

Deep learning-assisted analysis of single molecule dynamics from liquid-phase electron microscopy

We apply U-Net and UNet++ to analyze single-molecule movies obtained from liquid-phase electron microscopy. Neural networks allow full automation, and high throughput analysis of these low signal-to-noise ratio images, while achieving higher segmentation accuracy, and avoiding subjective errors as compared to the conventional threshold methods. The analysis enables the quantification of transient dynamics in chemical systems and the capture of rare intermediate states by resolving local conformational changes within a single molecule.

Experimental Guidelines to Image Transient Single-Molecule Events Using Graphene Liquid Cell Electron Microscopy

In quest of the holy grail to "see" how individual molecules interact in liquid environments, single-molecule imaging methods now include liquid-phase electron microscopy, whose resolution can be nanometers in space and several frames per second in time using an ordinary electron microscope that is routinely available to many researchers. However, with the current state of the art, protocols that sound similar to those described in the literature lead to outcomes that can differ. The key challenge is to achieve sample contrast under a safe electron dose within a frame rate adequate to capture the molecular process. Here, we present such examples from different systems─synthetic polymer, lipid assembly, DNA-enzyme─in which we have done this using graphene liquid cells. We describe detailed experimental procedures and share empirical experience for conducting successful experiments, starting from fabrication of a graphene liquid cell, to identification of high-quality liquid pockets from desirable shapes and sizes, to effective searching for target sample pockets under electron microscopy, and to discrimination of sample molecules and molecular processes of interest. These experimental tips can assist others who wish to make use of this method.

Direct Imaging of the Atomic Mechanisms Governing the Growth and Shape of Bimetallic Pt-Pd Nanocrystals by In Situ Liquid Cell STEM

Understanding the atomic mechanisms governing the growth of bimetallic nanoalloys is of great interest for scientists. As a promising material for photocatalysis applications, Pt-Pd bimetallic nanoparticles (NPs) have been in the spotlight for many years due to their catalytic performance, which is typically superior to that of pure Pt NPs. In this work, we use in situ liquid cell scanning transmission electron microscopy to track the exact atomic mechanisms governing the formation of bimetallic Pt-Pd NPs. We find that the formation process of the bimetallic Pt-Pd is divided into three stages. First, the nucleation and growth of ultrasmall primary nanoclusters are formed by the agglomeration of Pt and Pd atoms. Second, the primary nanoclusters are involved in a coalescence process to form two types of bigger agglomerates, namely, amorphous (a-NC) and crystalline (c-NC) nanoclusters. In the third stage, these clusters undergo a coalescence process leading to the formation of Pt-Pd NPs, while, in parallel, monomer attachment continues. We found that the third stage contains three types of coalescence processes, a-NC-a-NC, a-NC-c-NC, and c-NC-c-NC coalescence, which eventually give rise to crystalline bimetallic alloys. However, each type of coalescence gave distinct NPs in terms of shape and defects. Our results thus reveal the exact growth mechanisms of bimetallic alloys on the atomic scale, unravel the origin of their structure, and overall are of key interest to tailor the structure of bimetallic NPs.

Probing Heterogeneous Folding Pathways of DNA Origami Self-Assembly at the Molecular Level with Atomic Force Microscopy

A myriad of DNA origami nanostructures have been demonstrated in various intriguing applications. In pursuit of facile yet high-yield synthesis, the mechanisms underlying DNA origami folding need to be resolved. Here, we visualize the folding processes of several multidomain DNA origami structures under ambient annealing conditions in solution using atomic force microscopy with submolecular resolution. We reveal the coexistence of diverse transitional structures that might result in the same prescribed products. Based on the experimental observations and the simulation of the energy landscapes, we propose the heterogeneity of the folding pathways of multidomain DNA origami structures. Our findings may contribute to understanding the high-yield folding mechanism of DNA origami.

Liquid-Phase Transmission Electron Microscopy for Reliable In Situ Imaging of Nanomaterials

Liquid-phase transmission electron microscopy (LPTEM) is a powerful in situ visualization technique for directly characterizing nanomaterials in the liquid state. Despite its successful application in many fields, several challenges remain in achieving more accurate and reliable observations. We present LPTEM in chemical and biological applications, including studies for the morphological transformation and dynamics of nanoparticles, battery systems, catalysis, biomolecules, and organic systems. We describe the possible interactions and effects of the electron beam on specimens during observation and present sample-specific approaches to mitigate and control these electron-beam effects. We provide recent advances in achieving atomic-level resolution for liquid-phase investigation of structures anddynamics. Moreover, we discuss the development of liquid cell platforms and the introduction of machine-learning data processing for quantitative and objective LPTEM analysis.

Observation of Liquid-Liquid-Phase Separation and Vesicle Spreading during Supported Bilayer Formation via Liquid-Phase Transmission Electron Microscopy

Liquid-phase transmission electron microscopy (LP-TEM) enables the real-time visualization of nanoscale dynamics in solution. This technique has been used to study the formation and transformation mechanisms of organic and inorganic nanomaterials. Here, we study the formation of block-copolymer-supported bilayers using LP-TEM. We observe two formation pathways that involve either liquid droplets or vesicles as intermediates toward supported bilayers. Quantitative image analysis methods are used to characterize vesicle spread rates and show the origin of defect formation in supported bilayers. Our results suggest that bilayer assembly methods that proceed via liquid droplet intermediates should be beneficial for forming pristine supported bilayers. Furthermore, supported bilayers inside the liquid cells may be used to image membrane interactions with proteins and nanoparticles in the future.

Multi-step atomic mechanism of platinum nanocrystals nucleation and growth revealed by in-situ liquid cell STEM

The understanding of crystal growth mechanisms has broadened substantially. One significant advancement is based in the conception that the interaction between particles plays an important role in the growth of nanomaterials. This is in contrast to the classical model, which neglects this process. Direct imaging of such processes at atomic-level in liquid-phase is essential for establishing new theoretical models that encompass the full complexity of realistic scenarios and eventually allow for tailoring nanoparticle growth. Here, we investigate at atomic-scale the exact growth mechanisms of platinum nanocrystals from single atom to final crystals by in-situ liquid phase scanning transmission electron microscopy. We show that, after nucleation, the nanocrystals grow via two main stages: atomic attachment in the first stage, where the particles initially grow by attachment of the atoms until depletion of the surrounding zone. Thereafter, follows the second stage of growth, which is based on particle attachment by different atomic pathways to finally form mature nanoparticles. The atomic mechanisms underlying these growth pathways are distinctly different and have different driving forces and kinetics as evidenced by our experimental observations.

Coordination Cage-Based Emulsifiers: Templated Formation of Metal Oxide Microcapsules Monitored by In Situ LC-TEM

Metallo‐supramolecular self‐assembly has yielded a plethora of discrete nanosystems, many of which show competence in capturing guests and catalyzing chemical reactions. However, the potential of low‐molecular bottom‐up self‐assemblies in the development of structured inorganic materials has rarely been methodically explored so far. Herein, we present a new type of metallo‐supramolecular surfactant with the ability to stabilize non‐aqueous emulsions for a significant period. The molecular design of the surfactant is based on a heteroleptic coordination cage (CGA‐3; CGA=Cage‐based Gemini Amphiphile), assembled from two pairs of organic building blocks, grouped around two Pd(II) cations. Shape‐complementarity between the differently functionalized components generates discrete amphiphiles with a tailor‐made polarity profile, able to stabilize non‐aqueous emulsions, such as hexadecane‐in‐DMSO. These emulsions were used as a medium for the synthesis of spherical metal oxide microcapsules (titanium oxide, zirconium oxide, and niobium oxide) from soluble, water‐sensitive alkoxide precursors by allowing a controlled dosage of water to the liquid‐liquid phase boundary. Synthesized materials were analyzed by a combination of electron microscopic techniques. In situ liquid cell transmission electron microscopy (LC‐TEM) was utilized for the first time to visualize the dynamics of the emulsion‐templated formation of hollow inorganic titanium oxide and zirconium oxide microspheres.

A Close Look at Molecular Self-Assembly with the Transmission Electron Microscope

Molecular self-assembly is pervasive in the formation of living and synthetic materials. Knowledge gained from research into the principles of molecular self-assembly drives innovation in the biological, chemical, and materials sciences. Self-assembly processes span a wide range of temporal and spatial domains and are often unintuitive and complex. Studying such complex processes requires an arsenal of analytical and computational tools. Within this arsenal, the transmission electron microscope stands out for its unique ability to visualize and quantify self-assembly structures and processes. This review describes the contribution that the transmission electron microscope has made to the field of molecular self-assembly. An emphasis is placed on which TEM methods are applicable to different structures and processes and how TEM can be used in combination with other experimental or computational methods. Finally, we provide an outlook on the current challenges to, and opportunities for, increasing the impact that the transmission electron microscope can have on molecular self-assembly.

Verification of water presence in graphene liquid cells

Graphene liquid cells (GLCs) present the thinnest possible sample enclosures for liquid phase electron microscopy. However, the actual presence of liquid within a GLC is not always guaranteed. Of key importance is to reliably test the presence of the liquid, which is most frequently water or saline. Here, the commonly used methods for verifying the presence of water were evaluated. It is shown that depending on the type of sample, applying a single criterion does not always conclusively verify the presence of water. Testing liquid filling for a specific GLC sample preparation protocol should thus be considered critically. The most reliable method is direct observation of the water exciton peak using electron energy loss spectroscopy (EELS). But if this method cannot be carried out, water filling of the GLC can be verified from a combination of higher contrast in the image, the presence of bubbles, and an oxygen signal in the EEL spectrum, which can be accomplished at a high electron dose in spot mode. Nanoparticle movement does not always occur in a GLC.

Atomic Mechanisms of Nanocrystallization via Cluster-Clouds in Solution Studied by Liquid-Phase Scanning Transmission Electron Microscopy

The formation of nanocrystals is at the heart of various scientific disciplines, but the atomic mechanisms underlying the early stages of crystallization from supersaturated solutions are still rather unclear. Here, we used in situ liquid-phase scanning transmission electron microscopy to study at the atomic level the very early stages of gold nanocrystal growth, and the evolution of its crystallinity. We found that the nucleation is initiated by the formation of poorly crystalline nanoparticles. These are transformed into monocrystals via nanocrystallization governed by a complex process of multiple out-and-in exchanges of matter between a crystalline-core and a disordered-shell, referred to as the cluster-cloud. Our observations at the crystal/cluster-cloud interface during growth demonstrate that the initially formed nanocrystals expel the poorly crystallized phases as nanoclusters into the cluster-cloud, then readsorb it by two distinct pathways, namely, by (i) monomer attachments and (ii) nanocluster coalescence. This growth process eventually leads to the formation of monocrystalline nanoparticles.

Graphene Liquid Cell Electron Microscopy: Progress, Applications, and Perspectives

Graphene liquid cell electron microscopy (GLC-EM), a cutting-edge liquid-phase EM technique, has become a powerful tool to directly visualize wet biological samples and the microstructural dynamics of nanomaterials in liquids. GLC uses graphene sheets with a one carbon atom thickness as a viewing window and a liquid container. As a result, GLC facilitates atomic-scale observation while sustaining intact liquids inside an ultra-high-vacuum transmission electron microscopy chamber. Using GLC-EM, diverse scientific results have been recently reported in the material, colloidal, environmental, and life science fields. Here, the developments of GLC fabrications, such as first-generation veil-type cells, second-generation well-type cells, and third-generation liquid-flowing cells, are summarized. Moreover, recent GLC-EM studies on colloidal nanoparticles, battery electrodes, mineralization, and wet biological samples are also highlighted. Finally, the considerations and future opportunities associated with GLC-EM are discussed to offer broad understanding and insight on atomic-resolution imaging in liquid-state dynamics.

In situ Electron Microscopy of Complex Biological and Nanoscale Systems: Challenges and Opportunities

In situ imaging for direct visualization is important for physical and biological sciences. Research endeavors into elucidating dynamic biological and nanoscale phenomena frequently necessitate in situ and time-resolved imaging. In situ liquid cell electron microscopy (LC-EM) can overcome certain limitations of conventional electron microscopies and offer great promise. This review aims to examine the status-quo and practical challenges of in situ LC-EM and its applications, and to offer insights into a novel correlative technique termed microfluidic liquid cell electron microscopy. We conclude by suggesting a few research ideas adopting microfluidic LC-EM for in situ imaging of biological and nanoscale systems.

Emergence and Rearrangement of Dynamic Supramolecular Aggregates Visualized by Interferometric Scattering Microscopy

Studying dynamic self-assembling systems in their native environment is essential for understanding the mechanisms of self-assembly and thereby exerting full control over these processes. Traditional ensemble-based analysis methods often struggle to reveal critical features of the self-assembly that occur at the single particle level. Here, we describe a label-free single-particle assay to visualize real-time self-assembly in aqueous solutions by interferometric scattering microscopy. We demonstrate how the assay can be applied to biphasic reactions yielding micellar or vesicular aggregates, detecting the onset of aggregate formation, quantifying the kinetics at the single particle level, and distinguishing sigmoidal and exponential growth of aggregate populations. Furthermore, we can follow the evolution in aggregate size in real time, visualizing the nucleation stages of the self-assembly processes and record phenomena such as incorporation of oily components into the micelle or vesicle lumen.

100th Anniversary of Macromolecular Science Viewpoint: Single-Molecule Studies of Synthetic Polymers

Single polymer studies have revealed unexpected and heterogeneous dynamics among identical or seemingly similar macromolecules. In recent years, direct observation of single polymers has uncovered broad distributions in molecular behavior that play a key role in determining bulk properties. Early single polymer experiments focused primarily on biological macromolecules such as DNA, but recent advances in synthesis, imaging, and force spectroscopy have enabled broad exploration of chemically diverse polymer systems. In this Viewpoint, we discuss the recent study of synthetic polymers using single-molecule methods. In terms of polymer synthesis, direct observation of single chain polymerization has revealed heterogeneity in monomer insertion events at catalytic centers and decoupling of local and global growth kinetics. In terms of single polymer visualization, recent advances in super-resolution imaging, atomic force microscopy (AFM), and liquid-cell transmission electron microscopy (LC-TEM) can resolve structure and dynamics in single synthetic chains. Moreover, single synthetic polymers can be probed in the context of bulk material environments, including hydrogels, nanostructured polymers, and crystalline polymers. In each area, we highlight key challenges and exciting opportunities in using single polymer techniques to enhance our understanding of polymer science. Overall, the expanding versatility of single polymer methods will enable the molecular-scale design and fundamental understanding of a broad range of chemically diverse and functional polymeric materials.

Liquid-Phase Electron Microscopy for Soft Matter Science and Biology

Innovations in liquid-phase electron microscopy (LP-EM) have made it possible to perform experiments at the optimized conditions needed to examine soft matter. The main obstacle is conducting experiments in such a way that electron beam radiation can be used to obtain answers for scientific questions without changing the structure and (bio)chemical processes in the sample due to the influence of the radiation. By overcoming these experimental difficulties at least partially, LP-EM has evolved into a new microscopy method with nanometer spatial resolution and sub-second temporal resolution for analysis of soft matter in materials science and biology. Both experimental design and applications of LP-EM for soft matter materials science and biological research are reviewed, and a perspective of possible future directions is given.

Ultrafast electron imaging of surface charge carrier dynamics at low voltage

The performance of optoelectronic devices strongly depends on charge carrier dynamics on top of surfaces of the absorber layers. Unfortunately, this information cannot be selectively probed using conventional ultrafast laser spectroscopic methods, due to the large penetration depth (tens of nm to μm) of the photon pulses in the pump-probe configurations. Therefore, ultrafast time-resolved approaches that can directly and selectively visualize the behavior of the surface carrier dynamics are urgently needed. Here, we introduce a novel methodology of low-voltage scanning ultrafast electron microscopy that can take ultrafast time-resolved images (snapshots) of the surface of materials at the sub-nanometer level. By this approach, the surface of the photoactive materials is optically excited and imaged, using a pulsed low-voltage electron beam (1 keV) that interacts with the surface to generate secondary electrons with an energy of a few eV, and that are emitted only from the top surface of materials, providing direct information about the carrier dynamics and the localization of electron/holes in real space and time. An outlook on the potential applications of this low voltage approach in different disciplines will also be discussed.

Liquid-phase electron microscopy imaging of cellular and biomolecular systems

Liquid-phase electron microscopy, a new method for real-time nanoscopic imaging in liquid, makes it possible to study cells or biomolecules with a singular combination of spatial and temporal resolution. We review the state of the art in biological research in this growing and promising field.