Rational Engineering of a β-Glucosidase (H0HC94) from Glycosyl Hydrolase Family I (GH1) to Improve Catalytic Performance on Cellobiose

The conversion of lignocellulosic feedstocks by cellulases to glucose is a critical step in biofuel production. β-Glucosidases catalyze the final step in cellulose breakdown, producing glucose, and are often the rate-limiting step in biomass hydrolysis. The specific activity of most natural and engineered β-glucosidase is higher on the artificial substrate p-nitrophenyl β-d-glucopyranoside (pNPGlc) than on the natural substrate, cellobiose. We report an engineered β-glucosidase (Q319A H0HC94) with a 1.8-fold higher specific activity (366.3 ± 36 μmol/min/mg), a 1.5-fold increase in kcat (340.8 ± 27 s-1), and a 3-fold increase in catalytic efficiency (236.65 mM-1 s-1) over H0HC94 (WT) on cellobiose. Molecular dynamic simulations and protein structure network analysis indicate that the Q319A H0HC94 active site pocket is significantly remodeled compared to the WT, leading to changes in enzyme conformation, better accessibility of cellobiose inside the active site pocket, and higher enzymatic activity. This study shows the impact of rational engineering of a nonconserved residue to increase β-glucosidase substrate accessibility and catalytic efficiency by reducing crowding interaction between cellobiose and active site pocket residues near the gatekeeper region and increasing pocket volume and surface area. Thus, rational engineering of previously characterized enzymes could be an excellent strategy to improve cellulose hydrolysis.

Structural analysis of Tris binding in β-glucosidases

β-glucosidases (Bgls) are glycosyl hydrolases that catalyze the conversion of cellobiose or glucosyl-polysaccharide into glucose. Bgls are widely used in industry to produce bioethanol, wine and juice, and feed. Tris (tris(hydroxymethyl)aminomethane) is an organic compound that can inhibit the hydrolase activity of some Bgls, but the inhibition state and selectivity have not been fully elucidated. Here, three crystal structures of Thermoanaerobacterium saccharolyticum Bgl complexed with the Tris molecule were determined at 1.55-1.95 Å. The configuration of Tris binding to TsaBgl remained consistent across three crystal structures, and the amino acids interacting with the Tris molecule were conserved across Bgl enzymes. The positions O1 and O3 atoms of Tris exhibit the same binding moiety as the hydroxyl group of the glucose molecule. Tris molecules are stably positioned at the glycone site and coordinate with surrounding water molecules. The Tris-binding configuration of TsaBgl is similar to that of HjeBgl, HgaBgl, ManBgl, and KflBgl, but the arrangement of the water molecule coordinating Tris at the aglycone site differs. Meanwhile, both the arrangement of Tris and the water molecules in ubBgl, NkoBgl, and SfrBgl differ from those in TsaBgl. The binding configuration and affinity of the Tris molecule for Bgl may be affected by the residues on the aglycone and gatekeeper regions. This result will extend our knowledge of the inhibitory effect of Tris molecules on TsaBgl.

Engineering All-Round Cellulase for Bioethanol Production

One strategy to decrease both the consumption of crude oil and environmental damage is through the production of bioethanol from biomass. Cellulolytic enzyme stability and enzymatic hydrolysis play important roles in the bioethanol process. However, the gradually increased ethanol concentration often reduces enzyme activity and leads to inactivation, thereby limiting the final ethanol yield. Herein, we employed an optimized Two-Gene Recombination Process (2GenReP) approach to evolve the exemplary cellulase CBHI for practical bioethanol fermentation. Two all-round CBHI variants (named as R2 and R4) were obtained with simultaneously improved ethanol resistance, organic solvent inhibitor tolerance, and enzymolysis stability in simultaneous saccharification and fermentation (SSF). Notably, CBHI R4 had a 7.0- to 34.5-fold enhanced catalytic efficiency (kcat/KM) in the presence/absence of ethanol. Employing the evolved CBHI R2 and R4 in the 1G bioethanol process resulted in up to 10.27% (6.7 g/L) improved ethanol yield (ethanol concentration) than non-cellulase, which was far more beyond than other optimization strategies. Besides bioenergy fields, this transferable protein engineering routine holds the potential to generate all-round enzymes that meet the requirement in biotransformation and bioenergy fields.

Improving the cellobiose hydrolysis activity of glucose-stimulating β-glucosidase Bgl2A

β-Glucosidases with high catalytic activity and glucose tolerant properties possess promising applications in lignocellulose-based industries. To obtain enzymes possessing these properties, a semi-rational strategy was employed to engineer the glucose-stimulating β-glucosidase Bgl2A for high cellobiose hydrolysis activity. A total of 18 mutants were constructed. A22S, V224D, and A22S/V224D exhibited high specific activities of 272.06, 237.60, and 239.29 U/mg toward cellobiose, which were 2.5- to 2.8-fold of Bgl2A. A22S, V224D, and A22S/V224D exhibited increased k_cat values, which were 2.7- to 3.1-fold of Bgl2A. A22S and V224D maintained glucose-stimulating property, whereas A22S/V224D lost it. Using 150 g/L cellobiose as the substrate, the amount of glucose produced by A22S was the highest, yielding 129.70 g/L glucose after 3 h reaction at 35 °C. The synergistic effects of the engineered enzymes with commercial cellulase on hydrolyzing cellulose were investigated. Supplemented with the commercial cellulase and A22S, the highest glucose amount of 23.30 g/L was yielded from cellulose with hydrolysis rate of 21.02 %. Given its high cellobiose hydrolysis activity and glucose-stimulating properties, A22S can be used as a component of enzyme cocktail to match mesophilic cellulases for efficient cellulose hydrolysis.

Enzyme synergy for plant cell wall polysaccharide degradation

Valorizing plant cell wall, marine and algal polysaccharides is of utmost importance for the development of the circular bioeconomy. This is because polysaccharides are by far the most abundant organic molecules found in nature with complex chemical structures that require a large set of enzymes for their degradation. Microorganisms produce polysaccharide-specific enzymes that act in synergy when performing hydrolysis. Although discovered since decades enzyme synergy is still poorly understood at the molecular level and thus it is difficult to harness and optimize. In the last few years, more attention has been given to improve and characterize enzyme synergy for polysaccharide valorization. In this review, we summarize literature to provide an overview of the different type of synergy involving carbohydrate modifying enzymes and the recent advances in the field exemplified by plant cell-wall degradation.

Improving the catalytic activity of β-glucosidase from Coniophora puteana via semi-rational design for efficient biomass cellulose degradation

In order to improve the degradation activity of β-glucosidase (CpBgl) from Coniophora puteana, the structural modification was conducted. The enzyme activity of mutants CpBgl-Q20C and CpBgl-A240S was increased by 65.75% and 58.58%, respectively. These mutants exhibited maximum activity under the same conditions as wild-type CpBgl (65 ℃ and pH 5.0), slightly improved stabilities compared that of the wild-type, and remarkably enhanced activities in the presence of Mn²⁺ or Fe²⁺. The V_max of CpBgl-Q20C and CpBgl-A240S was increased to 138.18 and 125.14 μmol/mg/min, respectively, from 81.34 μmol/mg/min of the wild-type, and the catalysis efficiency (k_cat/K_m) of CpBgl-Q20C (335.79 min^-1/mM) and CpBgl-A240S (281.51 min^-1/mM) was significantly improved compared with that of the wild-type (149.12 min^-1/mM). When the mutant CpBgl-Q20C were used in the practical degradation of different biomasses, the glucose yields of filter paper, corncob residue, and fungi mycelia residue were increased by 17.68%, 25.10%, and 20.37%, respectively. The spatial locations of the mutation residues in the architecture of CpBgl and their unique roles in the enzyme-substrate binding and catalytic efficiency were probed in this work. These results laid a foundation for evolution of other glycoside hydrolases and the industrial bio-degradation of cellulosic biomass in nature.

Analysis of Laboratory-Evolved Flavin-Dependent Halogenases Affords a Computational Model for Predicting Halogenase Site Selectivity

Flavin-dependent halogenases (FDHs) catalyze selective halogenation of electron-rich aromatic compounds without the need for harsh oxidants required by conventional oxidative halogenation reactions. Predictive models for halogenase site selectivity could greatly improve their utility for chemical synthesis. Toward this end, we analyzed the structures and selectivity of three halogenase variants evolved to halogenate tryptamine with orthogonal selectivity. Crystal structures and reversion mutations revealed key residues involved in altering halogenase selectivity. Density functional theory calculations and molecular dynamics simulations are both consistent with hypohalous acid as the active halogenating species in FDH catalysis. This model was used to accurately predict the site selectivity of halogenase variants toward different synthetic substrates, providing a valuable tool for implementing halogenases in biocatalysis efforts.

Biochemical and Structural Analysis of a Glucose-Tolerant β-Glucosidase from the Hemicellulose-Degrading Thermoanaerobacterium saccharolyticum

β-Glucosidases (Bgls) convert cellobiose and other soluble cello-oligomers into glucose and play important roles in fundamental biological processes, providing energy sources in living organisms. Bgls are essential terminal enzymes of cellulose degradation systems and attractive targets for lignocellulose-based biotechnological applications. Characterization of novel Bgls is important for broadening our knowledge of this enzyme class and can provide insights into its further applications. In this study, we report the biochemical and structural analysis of a Bgl from the hemicellulose-degrading thermophilic anaerobe Thermoanaerobacterium saccharolyticum (TsaBgl). TsaBgl exhibited its maximum hydrolase activity on p-nitrophenyl-β-d-glucopyranoside at pH 6.0 and 55 °C. The crystal structure of TsaBgl showed a single (β/α)₈ TIM-barrel fold, and a β8-α14 loop, which is located around the substrate-binding pocket entrance, showing a unique conformation compared with other structurally known Bgls. A Tris molecule inhibited enzyme activity and was bound to the active site of TsaBgl coordinated by the catalytic residues Glu163 (proton donor) and Glu351 (nucleophile). Titration experiments showed that TsaBgl belongs to the glucose-tolerant Bgl family. The gatekeeper site of TsaBgl is similar to those of other glucose-tolerant Bgls, whereas Trp323 and Leu170, which are involved in glucose tolerance, show a unique configuration. Our results therefore improve our knowledge about the Tris-mediated inhibition and glucose tolerance of Bgl family members, which is essential for their industrial application.

Comparative Evaluation of Adsorption of Major Enzymes in a Cellulase Cocktail Obtained from Trichoderma reesei onto Different Types of Lignin

Cellulase adsorption onto lignin decreases the productivity of enzymatic hydrolysis of lignocellulosic biomass. Here, adsorption of enzymes onto different types of lignin was investigated, and the five major enzymes—cellobiohydrolases (CBHs), endoglucanase (Cel7B), β-glucosidase (Cel3A), xylanase (XYNIV), and mannanase (Man5A)—in a cellulase cocktail obtained from Trichoderma reesei were individually analyzed through SDS-PAGE and zymogram assay. Lignin was isolated from woody (oak and pine lignin) and herbaceous (rice straw and kenaf lignin) plants. The relative adsorption of CBHs compared to the control was in the range of 14.15–18.61%. The carbohydrate binding motif (CBM) of the CBHs contributed to higher adsorption levels in oak and kenaf lignin, compared to those in pine and rice lignin. The adsorption of endoglucanase (Cel7B) by herbaceous plant lignin was two times higher than that of woody lignin, whereas XYNIV showed the opposite pattern. β-glucosidase (Cel3A) displayed the highest and lowest adsorption ratios on rice straw and kenaf lignin, respectively. Mannanase (Man5A) was found to have the lowest adsorption ratio on pine lignin. Our results showed that the hydrophobic properties of CBM and the enzyme structures are key factors in adsorption onto lignin, whereas the properties of specific lignin types indirectly affect adsorption.

Fungal cellulases: protein engineering and post-translational modifications

Enzymatic degradation of lignocelluloses into fermentable sugars to produce biofuels and other biomaterials is critical for environmentally sustainable development and energy resource supply. However, there are problems in enzymatic cellulose hydrolysis, such as the complex cellulase composition, low degradation efficiency, high production cost, and post-translational modifications (PTMs), all of which are closely related to specific characteristics of cellulases that remain unclear. These problems hinder the practical application of cellulases. Due to the rapid development of computer technology in recent years, computer-aided protein engineering is being widely used, which also brings new opportunities for the development of cellulases. Especially in recent years, a large number of studies have reported on the application of computer-aided protein engineering in the development of cellulases; however, these articles have not been systematically reviewed. This article focused on the aspect of protein engineering and PTMs of fungal cellulases. In this manuscript, the latest literatures and the distribution of potential sites of cellulases for engineering have been systematically summarized, which provide reference for further improvement of cellulase properties. KEY POINTS: •Rational design based on virtual mutagenesis can improve cellulase properties. •Modifying protein side chains and glycans helps obtain superior cellulases. •N-terminal glutamine-pyroglutamate conversion stabilizes fungal cellulases.

Structural basis for peptide substrate specificities of glycosyltransferase GalNAc-T2

The polypeptide N-acetylgalactosaminyl transferase (GalNAc-T) enzyme family initiates O-linked mucin-type glycosylation. The family constitutes 20 isoenzymes in humans. GalNAc-Ts exhibit both redundancy and finely tuned specificity for a wide range of peptide substrates. In this work, we deciphered the sequence and structural motifs that determine the peptide substrate preferences for the GalNAc-T2 isoform. Our approach involved sampling and characterization of peptide-enzyme conformations obtained from Rosetta Monte Carlo-minimization-based flexible docking. We computationally scanned 19 amino acid residues at positions -1 and +1 of an eight-residue peptide substrate, which comprised a dataset of 361 (19x19) peptides with previously characterized experimental GalNAc-T2 glycosylation efficiencies. The calculations recapitulated experimental specificity data, successfully discriminating between glycosylatable and non-glycosylatable peptides with a probability of 96.5% (ROC-AUC score), a balanced accuracy of 85.5% and a false positive rate of 7.3%. The glycosylatable peptide substrates viz. peptides with proline, serine, threonine, and alanine at the -1 position of the peptide preferentially exhibited cognate sequon-like conformations. The preference for specific residues at the -1 position of the peptide was regulated by enzyme residues R362, K363, Q364, H365 and W331, which modulate the pocket size and specific enzyme-peptide interactions. For the +1 position of the peptide, enzyme residues K281 and K363 formed gating interactions with aromatics and glutamines at the +1 position of the peptide, leading to modes of peptide-binding sub-optimal for catalysis. Overall, our work revealed enzyme features that lead to the finely tuned specificity observed for a broad range of peptide substrates for the GalNAc-T2 enzyme. We anticipate that the key sequence and structural motifs can be extended to analyze specificities of other isoforms of the GalNAc-T family and can be used to guide design of variants with tailored specificity.

Fragment-derived modulators of an industrial β-glucosidase

A fragment screen of a library of 560 commercially available fragments using a kinetic assay identified a small molecule that increased the activity of the fungal glycoside hydrolase TrBgl2. An analogue by catalogue approach and detailed kinetic analysis identified improved compounds that behaved as nonessential activators with up to a 2-fold increase in maximum activation. The compounds did not activate the related bacterial glycoside hydrolase CcBglA demonstrating specificity. Interestingly, an analogue of the initial fragment inhibits both TrBgl2 and CcBglA, apparently through a mixed-model mechanism. Although it was not possible to determine crystal structures of activator binding to 55 kDa TrBgl2, solution NMR experiments demonstrated a specific binding site for the activator. A partial assignment of the NMR spectrum gave the identity of the amino acids at this site, allowing a model for TrBgl2 activation to be built. The activator binds at the entrance of the substrate-binding site, generating a productive conformation for the enzyme-substrate complex.

Molecular engineering to improve lignocellulosic biomass based applications using filamentous fungi

Lignocellulosic biomass is an abundant and renewable resource, and its utilization has become the focus of research and biotechnology applications as a very promising raw material for the production of value-added compounds. Filamentous fungi play an important role in the production of various lignocellulolytic enzymes, while some of them have also been used for the production of important metabolites. However, wild type strains have limited efficiency in enzyme production or metabolic conversion, and therefore many efforts have been made to engineer improved strains. Examples of this are the manipulation of transcriptional regulators and/or promoters of enzyme-encoding genes to increase gene expression, and protein engineering to improve the biochemical characteristics of specific enzymes. This review provides and overview of the applications of filamentous fungi in lignocellulosic biomass based processes and the development and current status of various molecular engineering strategies to improve these processes.

1H, 13C, 15N backbone and IVL methyl group resonance assignment of the fungal β-glucosidase from Trichoderma reesei

β-glucosidases have received considerable attention due to their essential role in bioethanol production from lignocellulosic biomass. β-glucosidase can hydrolyse cellobiose in cellulose degradation and its low activity has been considered as one of the main limiting steps in the process. Large-scale conversions of cellulose therefore require high enzyme concentration which increases the cost. β-glucosidases with improved activity and thermostability are therefore of great commercial interest. The fungus Trichoderma reseei expresses thermostable cellulolytic enzymes which have been widely studied as attractive targets for industrial applications. Genetically modified β-glucosidases from Trichoderma reseei have been recently commercialised. We have developed an approach in which screening of low molecular weight molecules (fragments) identifies compounds that increase enzyme activity and are currently characterizing fragment-based activators of TrBgl2. A structural analysis of the 55 kDa apo form of TrBgl2 revealed a classical (α/β)₈-TIM barrel fold. In the present study we present a partial assignment of backbone chemical shifts, along with those of the Ile (I)-Val (V)-Leu (L) methyl groups of TrBgl2. These data will be used to characterize the interaction of TrBgl2 with the small molecule activators.

A Novel Glucose-Tolerant GH1 β-Glucosidase and Improvement of Its Glucose Tolerance Using Site-Directed Mutation

A novel GH1 β-glucosidase gene (bgla) from marine bacterium was sequenced and expressed in Escherichia coli. After purification by Ni²⁺ affinity chromatography, the recombinant protein was characterized. The purified recombinant enzyme showed maximum activity at 40 °C, pH 7.5 and was stable between temperatures that range from 4 to 30 °C and over the pH range of 6-10. The enzyme displayed a high tolerance to glucose and maximum stimulation at the presence of 100 mM glucose. To improve glucose tolerance of the enzyme, a site-directed mutation (f171w) was introduced into β-glucosidase. The recombinant F171W showed a higher glucose tolerance than the wild type and maintained more than 40% residual activity at the presence of 4 M glucose. Additionally, the recombinant enzymes showed notable tolerance to ethanol. These properties suggest the enzymes may have potential applications for the fermentation of lignocellulosic sugars and the production of biofuels.

Glutantβase: a database for improving the rational design of glucose-tolerant β-glucosidases

Β-glucosidases are key enzymes used in second-generation biofuel production. They act in the last step of the lignocellulose saccharification, converting cellobiose in glucose. However, most of the β-glucosidases are inhibited by high glucose concentrations, which turns it a limiting step for industrial production. Thus, β-glucosidases have been targeted by several studies aiming to understand the mechanism of glucose tolerance, pH and thermal resistance for constructing more efficient enzymes. In this paper, we present a database of β-glucosidase structures, called Glutantβase. Our database includes 3842 GH1 β-glucosidase sequences collected from UniProt. We modeled the sequences by comparison and predicted important features in the 3D-structure of each enzyme. Glutantβase provides information about catalytic and conserved amino acids, residues of the coevolution network, protein secondary structure, and residues located in the channel that guides to the active site. We also analyzed the impact of beneficial mutations reported in the literature, predicted in analogous positions, for similar enzymes. We suggested these mutations based on six previously described mutants that showed high catalytic activity, glucose tolerance, or thermostability (A404V, E96K, H184F, H228T, L441F, and V174C). Then, we used molecular docking to verify the impact of the suggested mutations in the affinity of protein and ligands (substrate and product). Our results suggest that only mutations based on the H228T mutant can reduce the affinity for glucose (product) and increase affinity for cellobiose (substrate), which indicates an increment in the resistance to product inhibition and agrees with computational and experimental results previously reported in the literature. More resistant β-glucosidases are essential to saccharification in industrial applications. However, thermostable and glucose-tolerant β-glucosidases are rare, and their glucose tolerance mechanisms appear to be related to multiple and complex factors. We gather here, a set of information, and made predictions aiming to provide a tool for supporting the rational design of more efficient β-glucosidases. We hope that Glutantβase can help improve second-generation biofuel production. Glutantβase is available at http://bioinfo.dcc.ufmg.br/glutantbase .

In-Silico Characterization of Glycosyl Hydrolase Family 1 β-Glucosidase from Trichoderma asperellum UPM1

β-glucosidases (Bgl) are widely utilized for releasing non-reducing terminal glucosyl residues. Nevertheless, feedback inhibition by glucose end product has limited its application. A noticeable exception has been found for β-glucosidases of the glycoside hydrolase (GH) family 1, which exhibit tolerance and even stimulation by glucose. In this study, using local isolate Trichoderma asperellum UPM1, the gene encoding β-glucosidase from GH family 1, hereafter designated as TaBgl2, was isolated and characterized via in-silico analyses. A comparison of enzyme activity was subsequently made by heterologous expression in Escherichia coli BL21(DE3). The presence of N-terminal signature, cis-peptide bonds, conserved active site motifs, non-proline cis peptide bonds, substrate binding, and a lone conserved stabilizing tryptophan (W) residue confirms the identity of Trichoderma sp. GH family 1 β-glucosidase isolated. Glucose tolerance was suggested by the presence of 14 of 22 known consensus residues, along with corresponding residues L167 and P172, crucial in the retention of the active site's narrow cavity. Retention of 40% of relative hydrolytic activity on ρ-nitrophenyl-β-D-glucopyranoside (ρNPG) in a concentration of 0.2 M glucose was comparable to that of GH family 1 β-glucosidase (Cel1A) from Trichoderma reesei. This research thus underlines the potential in the prediction of enzymatic function, and of industrial importance, glucose tolerance of family 1 β-glucosidases following relevant in-silico analyses.

Engineering of β-Glucosidase Bgl15 with Simultaneously Enhanced Glucose Tolerance and Thermostability To Improve Its Performance in High-Solid Cellulose Hydrolysis

In this study, a Petri-dish-based double-layer high-throughput screening method was established to improve glucose tolerance of β-glucosidase Bgl15. Two beneficial mutations were identified, and the joint mutant 2R1 improved the half-maximal inhibitory concentration of glucose from 0.04 to 2.1 M. The crystal structure of 2R1 was subsequently determined at 2.7 Å. Structure analysis revealed that enhancement of glucose tolerance may be due to improved transglycosylation activity made possible by a hydrophobic binding site for glucose as an acceptor and more stringent control of a putative water channel. To further ameliorate the application potential of the enzyme, it was engineered to increase the half-life at 50 °C from 0.8 h (Bgl15) to 180 h (mutant 5R1). Furthermore, supplementation of 5R1 to the cellulase cocktail significantly improved glucose production from pretreated sugar cane bagasse by 38%. Consequently, this study provided an efficient approach to enhance glucose tolerance and generated a promising catalyst for cellulose saccharification.

Rozhkova A, N. Zorov I, Korotkova O, P. Sinitsyn A, Schwaneberg U, D. Davari M. Engineering Robust Cellulases for Tailored Lignocellulosic Degradation Cocktails

Lignocellulosic biomass is a most promising feedstock in the production of second-generation biofuels. Efficient degradation of lignocellulosic biomass requires a synergistic action of several cellulases and hemicellulases. Cellulases depolymerize cellulose, the main polymer of the lignocellulosic biomass, to its building blocks. The production of cellulase cocktails has been widely explored, however, there are still some main challenges that enzymes need to overcome in order to develop a sustainable production of bioethanol. The main challenges include low activity, product inhibition, and the need to perform fine-tuning of a cellulase cocktail for each type of biomass. Protein engineering and directed evolution are powerful technologies to improve enzyme properties such as increased activity, decreased product inhibition, increased thermal stability, improved performance in non-conventional media, and pH stability, which will lead to a production of more efficient cocktails. In this review, we focus on recent advances in cellulase cocktail production, its current challenges, protein engineering as an efficient strategy to engineer cellulases, and our view on future prospects in the generation of tailored cellulases for biofuel production.

Converting a β-N-acetylhexosaminidase into two trans-β-N-acetylhexosaminidases by domain-targeted mutagenesis

We have recently derived a β-N-acetylhexosaminidase, BbhI, from Bifidobacterium bifidum JCM 1254, which could regioselectively synthesize GlcNAcβ1-3Galβ1-4Glc with a yield of 44.9%. Here, directed evolution of BbhI by domain-targeted mutagenesis was carried out. Firstly, the GH20 domain was selected for random mutagenesis using MEGAWHOP method and a small library of 1300 clones was created. A total of 734 colonies with reduced hydrolytic activity were isolated, and three mutants with elevated transglycosylation yields, GlcNAcβ1-3Galβ1-4Glc yields of 68.5%, 74.7%, and 81.1%, respectively, were obtained. Subsequently, nineteen independent mutants were constructed according to all the mutation sites in these three mutants. After transglycosylation analysis, Asp714 and Trp773 were identified as key residues for improvement in transglycosylation ability and were chosen for the second round of directed evolution by site-saturation mutagenesis. Two most efficient mutants D714T and W773R that acted as trans-β-N-acetylhexosaminidase were finally achieved. D714T with the substitution at the putative nucleophile assistant residue Asp714 by threonine showed high yield of 84.7% with unobserved hydrolysis towards transglycosylation product. W773R with arginine substitution at Trp773 residue locating at the entrance of catalytic cavity led to the yield up to 81.8%. The k_cat/K_m values of D714T and W773R for hydrolysis of pNP-β-GlcNAc displayed drastic decreases. NMR investigation of protein-substrate interaction revealed an invariable mode of the catalytic cavity of D714T, W773R, and WT BbhI. The collective motions of protein model showed the mutations Thr714 and Arg773 exerted little effect on the dynamics of the inside but a large effect on the dynamics of the outside of catalytic cavity.

Structure and biochemical characterization of glucose tolerant β-1,4 glucosidase (HtBgl) of family 1 glycoside hydrolase from Hungateiclostridium thermocellum

β-1,4-glucosidase (HtBgl) of family 1 glycoside hydrolase from Hungateiclostridium thermocellum was cloned in pET28a(+) vector, expressed, biochemically and structurally characterized. HtBgl displayed 67 U/mg activity against 4-nitrophenyl-β-d-glucopyranoside, followed by 180 U/mg against cellobiose and 42 U/mg activity against 4-nitrophenyl-β-d-galactopyranoside. HtBgl displayed an optimum temperature of 65 °C and an optimum pH of 6.0. HtBgl was stable in the pH range, 4.0-8.0 and displayed the thermostability up to 60 °C for 1 h. HtBgl displayed the glucose tolerance up to 750 mM and retained ~70% activity after 20 h. HtBgl crystal structure submitted (PDB id 5OGZ) by others exhibited a classical Triosephosphate Isomerase, (β/α)₈-barrel fold. Protein melting analysis of HtBgl exhibited a single peak at 78 °C and the addition of 5 mM Mg²⁺ shifted the peak to 82 °C. Molecular dynamics studies showed that the amino acid residues from 351 to 375 exhibit the flexibility due to the presence of the catalytic acid residue. The structure comparison of HtBgl with homologous proteins and its docking analysis with probable ligands revealed that the residues, E166 and E355 are involved in the catalysis. The SAXS analysis of HtBgl showed that the protein is monomeric and present in a fully folded state. The radius of gyration (Rg) found was 2.15-2.26 nm. The bell-shaped curve obtained by Kratky plot analysis displayed the globular shape and fully folded state with flexibility in the N-terminal region. The HtBgl crystal structure superposed well with the SAXS derived dummy atom model.

An engineered GH1 β-glucosidase displays enhanced glucose tolerance and increased sugar release from lignocellulosic materials

β-glucosidases play a critical role among the enzymes in enzymatic cocktails designed for plant biomass deconstruction. By catalysing the breakdown of β-1, 4-glycosidic linkages, β-glucosidases produce free fermentable glucose and alleviate the inhibition of other cellulases by cellobiose during saccharification. Despite this benefit, most characterised fungal β-glucosidases show weak activity at high glucose concentrations, limiting enzymatic hydrolysis of plant biomass in industrial settings. In this study, structural analyses combined with site-directed mutagenesis efficiently improved the functional properties of a GH1 β-glucosidase highly expressed by Trichoderma harzianum (ThBgl) under biomass degradation conditions. The tailored enzyme displayed high glucose tolerance levels, confirming that glucose tolerance can be achieved by the substitution of two amino acids that act as gatekeepers, changing active-site accessibility and preventing product inhibition. Furthermore, the enhanced efficiency of the engineered enzyme in terms of the amount of glucose released and ethanol yield was confirmed by saccharification and simultaneous saccharification and fermentation experiments using a wide range of plant biomass feedstocks. Our results not only experimentally confirm the structural basis of glucose tolerance in GH1 β-glucosidases but also demonstrate a strategy to improve technologies for bioethanol production based on enzymatic hydrolysis.

A Computational Method to Propose Mutations in Enzymes Based on Structural Signature Variation (SSV)

With the use of genetic engineering, modified and sometimes more efficient enzymes can be created for different purposes, including industrial applications. However, building modified enzymes depends on several in vitro experiments, which may result in the process being expensive and time-consuming. Therefore, computational approaches could reduce costs and accelerate the discovery of new technological products. In this study, we present a method, called structural signature variation (SSV), to propose mutations for improving enzymes’ activity. SSV uses the structural signature variation between target enzymes and template enzymes (obtained from the literature) to determine if randomly suggested mutations may provide some benefit for an enzyme, such as improvement of catalytic activity, half-life, and thermostability, or resistance to inhibition. To evaluate SSV, we carried out a case study that suggested mutations in β-glucosidases: Essential enzymes used in biofuel production that suffer inhibition by their product. We collected 27 mutations described in the literature, and manually classified them as beneficial or not. SSV was able to classify the mutations with values of 0.89 and 0.92 for precision and specificity, respectively. Then, we used SSV to propose mutations for Bgl1B, a low-performance β-glucosidase. We detected 15 mutations that could be beneficial. Three of these mutations (H228C, H228T, and H228V) have been related in the literature to the mechanism of glucose tolerance and stimulation in GH1 β-glucosidase. Hence, SSV was capable of detecting promising mutations, already validated by in vitro experiments, that improved the inhibition resistance of a β-glucosidase and, consequently, its catalytic activity. SSV might be useful for the engineering of enzymes used in biofuel production or other industrial applications.

Substrate binding versus escape dynamics in a pH-affected fungal beta-glucosidase revealed by molecular dynamics simulations

The cellulolytic ability of fungal species is important to both natural and engineered biocycling of plant matter. One essential step is the conversion of cellobiose into glucose catalyzed by beta-glucosidases. Mutagenesis studies have implicated altering the substrate binding pocket to influence the pH-activity profile of this enzyme. However, structural understanding of the pH-affected substrate binding environment is lacking. Here we conducted molecular dynamics simulations of fully hydrated TrBgl2, a beta-glucosidase of Trichoderma reesei, equilibrated at its optimal pH (pH 6) and two unfavorable pHs (pH 5 and pH 7.5). We identified structural arrangement of specific residues that facilitated substrate escape from the catalytic site at pH 5 but locked the bound substrate in an unfavorable orientation at pH 7.5. For comparative analysis, we also performed simulations of a mutated TrBgl2 with previously demonstrated improved catalysis as a function of pH. We captured the responsible conformational changes in the engineered substrate binding pocket.

Multifunctional elastin-like polypeptide renders β-glucosidase enzyme phase transition and high stability

BACKGROUND

In the enzymatic conversion of biomass, it becomes an important issue to efficiently and cost-effectively degrade cellulose into fermentable glucose. β-Glucosidase (Bgluc), an essential member of cellulases, plays a critical role in cellulosic biomass degradation. The difficulty in improving the stability of Bgluc has been a bottleneck in the enzyme-dependent cellulose degradation. The traditional method of protein purification, however, leads to higher production cost and a decrease in activity. To simplify and efficiently purify Bgluc with modified special properties, Bgluc-tagged ELP and His with defined phase transitions was designed to facilitate the process.

RESULTS

Here, a novel binary ELP and His tag was fused with Bgluc from termite Coptotermes formosanus to construct a Bgluc-linker-ELP-His recombinant fusion protein (BglucLEH). The recombinant plasmid Bgluc expressing a His tag (BglucH) was also constructed. The BglucLEH and BglucH were expressed in E. coli BL21 and purified using inverse transition cycling (ITC) or Ni-NTA resin. The optimum salt concentration for the ITC purification of BglucLEH was 0.5 M (NH₄)₂SO₄ and the specific activity of BglucLEH purified by ITC was 75.5 U/mg for substrate p-NPG, which was slightly higher than that of BglucLEH purified by Ni-NTA (68.2 U/mg). The recovery rate and purification fold of BglucLEH purified by ITC and Ni-NTA were 77.8%, 79.1% and 12.60, 11.60, respectively. The results indicated that purification with ITC was superior to the traditional Ni-NTA. The K _m of BglucLEH and BglucH for p-NPG was 5.27 and 5.73 mM, respectively. The K _ca t/K _m (14.79 S^-1 mM^-1) of BglucLEH was higher than that of BglucH (12.10 S^-1 mM^-1). The effects of ELP tag on the enzyme activity, secondary structure and protein stability were also studied. The results showed that ELP tag did not affect the secondary structure or enzyme activity of Bgluc. More importantly, ELP improved the protein stability in harsh conditions such as heating and exposure to denaturant.

CONCLUSION

The Bgluc-linker-ELP-His system shows wide application prospect in maintaining the activity, efficient purification and improving the stability of Bgluc. These properties of BglucLEH make it an interesting tool to reduce cost, to improve the efficiency of biocatalyst and potentially to enhance the degradation of lignocellulosic biomass.

Enhancing the Thermostability of Highly Active and Glucose-Tolerant β-Glucosidase Ks5A7 by Directed Evolution for Good Performance of Three Properties

A high-performance β-glucosidase for efficient cellulose hydrolysis needs to excel in thermostability, catalytic efficiency, and resistance to glucose inhibition. However, it is challenging to achieve superb properties in all three aspects in a single enzyme. In this study, a hyperactive and glucose-tolerant β-glucosidase Ks5A7 was employed as the starting point. Four rounds of random mutagenesis were then performed, giving rise to a thermostable mutant 4R1 with five amino acid substitutions. The half-life of 4R1 at 50 °C is 8640-fold that of Ks5A7 (144 h vs 1 min). Meanwhile, 4R1 had a higher specific activity (374.26 vs 243.18 units·mg^-1) than the wild type with a similar glucose tolerance. When supplemented to Celluclast 1.5L, the mutant significantly enhanced the hydrolysis of pretreated sugar cane bagasse, improving the released glucose concentration by 44%. With excellent performance in thermostability, activity, and glucose tolerance, 4R1 will serve as an exceptional catalyst for industrial applications.

A highly glucose-tolerant GH1 β-glucosidase with greater conversion rate of soybean isoflavones in monogastric animals

In the feed industry, β-glucosidase has been widely used in the conversion of inactive and bounded soybean isoflavones into active aglycones. However, the conversion is frequently inhibited by the high concentration of intestinal glucose in monogastric animals. In this study, a GH1 β-glucosidase (AsBG1) with high specific activity, thermostability and glucose tolerance (IC50 = 800 mM) was identified. It showed great glucose tolerance against substrates with hydrophobic aryl ligands (such as pNPG and soy isoflavones). Using soybean meal as the substrate, AsBG1 exhibited higher hydrolysis efficiency than the GH3 counterpart Bgl3A with or without the presence of glucose in the reaction system. Furthermore, it is the first time to find that the endogenous β-glucosidase of soybean meal, mostly belonging to GH3, plays a role in the hydrolysis of soybean isoflavones and is highly sensitive to glucose. These findings lead to a conclusion that the GH1 rather than GH3 β-glucosidase has prosperous application advantages in the conversion of soybean isoflavones in the feed industry.

Structures of a glucose-tolerant β-glucosidase provide insights into its mechanism

Cellulose can be converted to ethanol via the fermentation of glucose, which is considered as a promising green alternative for transportation fuels. The conversion of cellulose to glucose needs three enzymes, in which β-glucosidase (BGL) plays an essential role. However, BGL is inhibited by its own product glucose, greatly limiting its applications in industry. We previously obtained a novel BGL named Bgl6 with a high glucose tolerance. Further engineering through random mutagenesis produced a triple mutant M3 with improved thermostability. This enzyme shows promising properties for wide applications but the structural basis of the unusual properties of Bgl6 is not clear. In this study, we determined the crystal structures of Bgl6 and variants at high resolution, which provide insights into its glucose-tolerant mechanism and thermostability. Particularly, Bgl6 forms an extra channel that could be used as a secondary binding site for glucose, which may contribute to glucose tolerance. Additionally, the triple mutations could strengthen the hydrophobic interactions within the enzyme and may be responsible for the enhanced thermostability exhibited by M3, which was further confirmed by dynamic light scattering data. Lastly, structural comparison to other orthologs allows us to formulate new strategies on how to improve the catalytic efficiency of Bgl6.

When substrate inhibits and inhibitor activates: implications of β-glucosidases

BACKGROUND

β-glucosidases (BGs) catalyze the hydrolysis of β-glycosidic bonds in glucose derivatives. They constitute an important group of enzymes with biotechnological interest like supporting cellulases in degradation of lignocellulose to fermentable sugars. In the latter context, the glucose tolerant BGs are of particular interest. These BGs often show peculiar kinetics, including inhibitory effects of substrates and activating effects of inhibitors, such as glucose or xylose. The mechanisms behind the activating/inhibiting effects are poorly understood. The nonproductive binding of substrate is expected in cases where enzymes with multiple consecutive binding subsites are studied on substrates with a low degree of polymerization. The effects of inhibitors to BGs exerting nonproductive binding of substrate have not been discussed in the literature before.

RESULTS

Here, we performed analyses of different reaction schemes using the catalysis by retaining BGs as a model. We found that simple competition of inhibitor with nonproductive binding of substrate can account for the activation of enzyme by inhibitor without involving any allosteric effects. The transglycosylation to inhibitor was also able to explain the activating effect of inhibitor. For both mechanisms, the activation was caused by the increase of k_cat with increasing inhibitor concentration, while k_cat/K_m always decreased. Therefore, the activation by inhibitor was more pronounced at high substrate concentrations. The possible contribution of the two mechanisms in the activation by inhibitor was dependent on the rate-limiting step of glycosidic bond hydrolysis as well as on whether and which glucose-unit-binding subsites are interacting.

CONCLUSION

Knowledge on the mechanisms of the activating/inhibiting effects of inhibitors helps the rational engineering and selection of BGs for biotechnological applications. Provided that the catalysis is consistent with the reaction schemes addressed here and underlying assumptions, the mechanism of activation by inhibitor reported here is applicable for all enzymes exerting nonproductive binding of substrate.

Lignocellulose-Biorefinery: Ethanol-Focused

The development prospects of the world markets for petroleum and other liquid fuels are diverse and partly contradictory. However, comprehensive changes for the energy supply of the future are essential. Notwithstanding the fact that there are still very large deposits of energy resources from a geological point of view, the finite nature of conventional oil reserves is indisputable. To reduce our dependence on oil, the EU, the USA, and other major economic zones rely on energy diversification. For this purpose, alternative materials and technologies are being sought, and is most obvious in the transport sector. The objective is to progressively replace fossil fuels with renewable and more sustainable fuels. In this respect, biofuels have a pre-eminent position in terms of their capability of blending with fossil fuels and being usable in existing cars without substantial modification. Ethanol can be considered as the primary renewable liquid fuel. In this chapter enzymes, micro-organisms, and processes for ethanol production based on renewable resources are described.

Using the Amino Acid Network to Modulate the Hydrolytic Activity of β-Glycosidases

The active site residues in GH1 β-glycosidases are compartmentalized into 3 functional regions, involved in catalysis or binding of glycone and aglycone motifs from substrate. However, it still remains unclear how residues outside the active site modulate the enzymatic activity. To tackle this question, we solved the crystal structure of the GH1 β-glycosidase from Spodoptera frugiperda (Sfβgly) to systematically map its residue contact network and correlate effects of mutations within and outside the active site. External mutations neighbouring the functional residues involved in catalysis and glycone-binding are deleterious, whereas mutations neighbouring the aglycone-binding site are less detrimental or even beneficial. The large dataset of new and previously characterized Sfβgly mutants supports that external perturbations are coherently transmitted to active site residues possibly through contacts and specifically disturb functional regions they interact to, reproducing the effects observed for direct mutations of functional residues. This allowed us to suggest that positions related to the aglycone-binding site are preferential targets for introduction of mutations aiming to further improve the hydrolytic activity of β-glycosidases.

The role of arabinokinase in arabinose toxicity in plants

Plant cell wall polymers are synthesized by glycosyltransferases using nucleotide sugars as substrates. Most UDP-sugars are synthesized from UDP-glucose via de novo pathways but salvage pathways work in parallel to recycle sugars, which have been released during cell wall polymer and glycoprotein turnover. Here we report on the cloning and biochemical analysis of two arabinokinases in Arabidopsis. Arabinokinase is a 100 kDa protein located in the cytosol with a putative N-terminal glycosyltransferase domain and a C-terminal sugar-1-kinase domain. This unique structure is highly conserved in the plant kingdom. Arabinokinase has a high affinity for l-arabinose, which is the only sugar substrate of this GHMP (galactose; homoserine; mevalonate; phosphomevalonate) kinase. Plants that were knocked-out for arabinokinase and the previously described ara1-1 mutant were characterized. The ARA1-1 mutant form of the enzyme carries a point mutation in an α-helix. The mutation is close to the substrate binding site and changes the Km value for arabinose from 80 μm in the wild type to 17 000 μm in ARA1-1. The previous arabinose toxicity explanation is challenged by knockout plants in arabinokinase that accumulate higher levels of arabinose but do not show signs of arabinose toxicity. Analysis of marker genes from sugar signalling pathways (SnRK1 and Tor) suggest that ara1-1 misinterprets its carbon energy status. Although glucose is present in ara1-1 similar to wild type levels, it constitutively changes gene expression as typically found in wild type plants only under starvation conditions. Furthermore, ara1-1 shows increased expression of marker genes for programmed cell death as found in other lesion mimic mutants.

Improve ethanol tolerance of β-glucosidase Bgl1A by semi-rational engineering for the hydrolysis of soybean isoflavone glycosides

A β-glucosidase Bgl1A variant (A24S/F297Y) with improved ethanol tolerance was obtained by semi-rational engineering. At 30-40°C, IC50 values (the amount required for inhibiting 50% enzyme activity) of the variant for ethanol were 17-30% (v/v), 1.4- to 2.4-fold of Bgl1A. When incubating in 15% (v/v) ethanol at 30°C, the half-life of A24S/F297Y was 13min; whereas Bgl1A lost all enzyme activity within 5min. A24S/F297Y was more stable at pH 7.5 than at pH 6.5, and more than 50% of the original activity remained after incubation at 30°C for 10h. At 35°C and pH 7.5, the half-life of A24S/F297Y was 80min, 4.3 times longer than that of Bgl1A. When converting isoflavone glycosides to aglycones using A24S/F297Y as catalyst, the hydrolysis rates were 99% for daidzin and 98% for genistin. The concentrations of daidzein and genistein rapidly increased by 7.02mM and 4.35mM within 10min, respectively. These results showed that A24S/F297Y was a promising candidate for the enzymatic hydrolysis of soybean isoflavone glycosides.

Improvements in Glucose Sensitivity and Stability of Trichoderma reesei β-Glucosidase Using Site-Directed Mutagenesis

Glucose sensitivity and pH and thermal stabilities of Trichoderma reesei Cel1A (Bgl II) were improved by site-directed mutagenesis of only two amino acid residues (L167W or P172L) at the entrance of the active site. The Cel1A mutant showed high glucose tolerance (50% of inhibitory concentration = 650 mM), glucose stimulation (2.0 fold at 50 mM glucose), and enhanced specific activity (2.4-fold) compared with those of the wild-type Cel1A. Furthermore, the mutant enzyme showed stability at a wide pH range of 4.5–9.0 and possessed high thermal stability up to 50°C with 80% of the residual activities compared with the stability seen at the pH range of 6.5–7.0 and temperatures of up to 40°C in the wild-type Cel1A. Kinetic studies for hydrolysis revealed that the Cel1A mutant was competitively inhibited by glucose at similar levels as the wild-type enzyme. Additionally, the mutant enzyme exhibited substrate inhibition, which gradually disappeared with an increasing glucose concentration. These data suggest that the glucose stimulation was caused by relieve the substrate inhibition in the presence of glucose. To conclude, all the properties improved by the mutagenesis would be great advantages in degradation of cellulosic biomass together with cellulases.

The impact of a single-nucleotide mutation of bgl2 on cellulase induction in a Trichoderma reesei mutant

BACKGROUND

The filamentous fungus Trichoderma reesei (anamorph of Hypocrea jecorina) produces increased cellulase expression when grown on cellulose or its derivatives as a sole carbon source. It has been believed that β-glucosidases of T. reesei not only metabolize cellobiose but also contribute in the production of inducers of cellulase gene expression by their transglycosylation activity. The cellulase hyper-producing mutant PC-3-7 developed in Japan has enhanced cellulase production ability when cellobiose is used as the inducer. The comparative genomics analysis of PC-3-7 and its parent revealed a single-nucleotide mutation within the bgl2 gene encoding intracellular β-glucosidase II (BGLII/Cel1a), giving rise to an amino acid substitution in PC-3-7, which could potentially account for the enhanced cellulase expression when these strains are cultivated on cellulose and cellobiose.

RESULTS

To analyze the effects of the BGLII mutation in cellulase induction, we constructed both a bgl2 revertant and a disruptant. Enzymatic analysis of the transformant lysates showed that the strain expressing mutant BGLII exhibited weakened cellobiose hydrolytic activity, but produced some transglycosylation products, suggesting that the SNP in bgl2 strongly diminished cellobiase activity, but did not result in complete loss of function of BGLII. The analysis of the recombinant BGLII revealed that transglycosylation products might be oligosaccharides, composed probably of glucose linked β-1,4, β-1,3, or a mixture of both. PC-3-7 revertants of bgl2 exhibited reduced expression and inducibility of cellulase during growth on cellulose and cellobiose substrates. Furthermore, the effect of this bgl2 mutation was reproduced in the common strain QM9414 in which the transformants showed cellulase production comparable to that of PC-3-7.

CONCLUSION

We conclude that BGLII plays an important role in cellulase induction in T. reesei and that the bgl2 mutation in PC-3-7 brought about enhanced cellulase expression on cellobiose. The results of the investigation using PC-3-7 suggested that other mutation(s) in PC-3-7 could also contribute to cellulase induction. Further investigation is essential to unravel the mechanism responsible for cellulase induction in T. reesei.