Lipid corralling and poloxamer squeeze-out in membranes

Evolution of interfacial mechanics of lung surfactant mimics progression of acute respiratory distress syndrome

How acute respiratory distress syndrome progresses from underlying disease or trauma is poorly understood, and there are no generally accepted treatments resulting in a 40% mortality rate. However, during the inflammation that accompanies this disease, the phospholipase A2 concentration increases in the alveolar fluids leading to the hydrolysis of bacterial, viral, and lung surfactant phospholipids into soluble lysolipids. We show that if the lysolipid concentration in the subphase reaches or exceeds its critical micelle concentration, the surface tension, γ, of dipalmitoyl phosphatidylcholine (DPPC) or Curosurf monolayers increases and the dilatational modulus, [Formula: see text], decreases to that of a pure lysolipid interface. This is consistent with DPPC being solubilized in lysolipid micelles and being replaced by lysolipid at the interface. These changes lead to [Formula: see text] which is the criterion for the Laplace instability that can lead to mechanical instabilities during lung inflation, potentially causing alveolar collapse. These findings provide a mechanism behind the alveolar collapse and uneven lung inflation during ARDS.

Effect of Poloxamer Binding on the Elasticity and Toughness of Model Lipid Bilayers

Poloxamers, also known by their trade name, Pluronics, are known to mitigate damage to cellular membranes. However, the mechanism underlying this protection is still unclear. We investigated the effect of poloxamer molar mass, hydrophobicity, and concentration on the mechanical properties of giant unilamellar vesicles, composed of 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine, using micropipette aspiration (MPA). Properties including the membrane bending modulus (κ), stretching modulus (K), and toughness are reported. We found that poloxamers tend to decrease K, with an impact largely dictated by their membrane affinity, i.e., both a high molar mass and less hydrophilic poloxamers depress K at lower concentrations. However, a statistically significant effect on κ was not observed. Several poloxamers studied here showed evidence of membrane toughening. Additional pulsed-field gradient NMR measurements provided insight into how polymer binding affinity connects to the trends observed by MPA. This model study provides important insights into how poloxamers interact with lipid membranes to further understanding of how they protect cells from various types of stress. Furthermore, this information may prove useful for the modification of lipid vesicles for other applications, including use in drug delivery or as nanoreactors.

Different effects of two Poloxamers (L61 and F68) on the conductance of bilayer lipid membranes

The integral conductance of planar lipid bilayer membranes in the presence of two Poloxamers (Pluronics) L61 and F68 with the same lengths of hydrophobic poly(propylene oxide) blocks and the different lengths of hydrophilic poly(ethylene oxide) blocks increases with an increase in the concentration of both Pluronics; however, the shape of the conductance-concentration curves is super linear for L61 and sublinear for F68. In the presence of both Pluronics, rare discrete current jumps are observed against the background of continuous current. At high concentrations, the I-V curves of membranes with both L61 and F68 became nonlinear at sufficiently low voltages but differed significantly. At voltages greater than 50 mV, the conductance of membranes with L61 increased sharply and quantized jumps were observed toward higher conductance, which could be interpreted as the appearance of additional pores. On the contrary, the conductance of membranes with F68 decreased and quantized jumps to lower conductance were observed, which could be interpreted as blocking of already existing pores. We attributed the differences in the conductance-concentration and I-V curves of these two Pluronics to their different effects on the dynamics of membrane hydration and, accordingly, on the probability of formation of conducting pores.

Effect of Bottlebrush Poloxamer Architecture on Binding to Liposomes

Poloxamers─triblock copolymers consisting of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO)─have demonstrated cell membrane stabilization efficacy against numerous types of stress. However, the mechanism responsible for this stabilizing effect remains elusive, hindering engineering of more effective therapeutics. Bottlebrush polymers have a wide parameter space and known relationships between architectural parameters and polymer properties, enabling their use as a tool for mechanistic investigations of polymer-lipid bilayer interactions. In this work, we utilized a versatile synthetic platform to create novel bottlebrush analogues to poloxamers and then employed pulsed-field-gradient NMR and an in vitro osmotic stress assay to explore the effect of bottlebrush architectural parameters on binding to, and protection of, model phospholipid bilayers. We found that the binding affinity of a bottlebrush poloxamer (BBP) (B-E₁₀⁴³P₅¹⁵, M_n ≈ 26 kDa) is about 3 times higher than a linear poloxamer with a similar composition and number of PPO units (L-E₉₃P₅₄E₉₃, M_n ≈ 11 kDa). Furthermore, BBP binding is sensitive to overall molecular weight, side-chain length, and architecture (statistical versus block). Finally, all tested BBPs exhibit a protective effect on cell membranes under stress at sub-μM concentrations. As the factors controlling membrane affinity and protection efficacy of bottlebrush poloxamers are not understood, these results provide important insight into how they adhere to and stabilize a lipid bilayer surface.

Synthesis and Micellization of Bottlebrush Poloxamers

Bottlebrush polymers are characterized by an expansive parameter space, including graft length and spacing along the backbone, and these features impact various structural and physical properties such as molecular diffusion and bulk viscosity. In this work, we report a synthetic strategy for making grafted block polymers with poly(propylene oxide) and poly(ethylene oxide) side chains, bottlebrush analogues of poloxamers. Combined anionic and sequential ring-opening metathesis polymerization yielded low dispersity polymers, at full conversion of the macromonomers, with control over graft length, graft end-groups, and overall molecular weight. A set of bottlebrush poloxamers (BBPs), with identical graft lengths and composition, was synthesized over a range of molecular weights. Dynamic light scattering and transmission electron microscopy were used to characterize micelle formation in aqueous buffer. The critical micelle concentration scales exponentially with overall molecular weight for both linear and bottlebrush poloxamers; however, the bottlebrush architecture shifts micelle formation to a much higher concentration at a comparable molecular weight. Consequently, BBPs can exist in solution as unimers at significantly higher molecular weights and concentrations than the linear analogues.

Oral administration of buparvaquone nanostructured lipid carrier enables in vivo activity against Leishmania infantum

Leishmaniasis, a neglected tropical disease, is prevalent in 98 countries with the occurrence of 1.3 million new cases annually. The conventional therapy for visceral leishmaniasis requires hospitalization due to the severe adverse effects of the drugs, which are administered parenterally. Buparvaquone (BPQ) showed in vitro activity against leishmania parasites; nevertheless, it has failed in vivo tests due to its low aqueous solubility. Though, lipid nanoparticles can overcome this holdback. In this study we tested the hypothesis whether BPQ-NLC shows in vivo activity against L. infantum. Two optimized formulations were prepared (V1: 173.9 ± 1.6 nm, 0.5 mg of BPQ/mL; V2: 232.4 ± 1.6 nm, 1.3 mg of BPQ/mL), both showed increased solubility up to 73.00-fold, and dissolution up to 83.29%, while for the free drug it was only 2.89%. Cytotoxicity test showed their biocompatibility (CC50 >554.4 µM). Besides, the V1 dose of 0.3 mg/kg/day for 10 days reduced the parasite burden in 83.4% ±18.2% (p <0.05) in the liver. BPQ-NLC showed similar leishmanicidal activity compared to miltefosine. Therefore, BPQ-NLC is a promising addition to the limited therapeutic arsenal suitable for leishmaniasis oral administration treatment.

Spatial Distribution of PEO-PPO-PEO Block Copolymer and PEO Homopolymer in Lipid Bilayers

Maintaining the integrity of cell membranes is indispensable for cellular viability. Poloxamer 188 (P188), a poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer with a number-average molecular weight of 8700 g/mol and containing 80% by mass PEO, protects cell membranes from various external injuries and has the potential to be used as a therapeutic agent in diverse applications. The membrane protection mechanism associated with P188 is intimately connected with how this block copolymer interacts with the lipid bilayer, the main component of a cell membrane. Here, we report the distribution of P188 in a model lipid bilayer comprising 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) using neutron reflectivity (NR) and atomic force microscopy (AFM). We also investigated the association of a PEO homopolymer (PEO8.4K; M_n = 8400 g/mol) that does not protect living cell membranes. These experiments were conducted following incubation of a 4.5 mmol/L polymer solution in a buffer that mimics physiological conditions with supported POPC bilayer membranes followed by washing with the aqueous medium. In contrast to previous reports, which dealt with P188 and PEO in salt-free solutions, both P188 and PEO8.4K penetrate into the inner portion of the lipid bilayer as revealed by NR, with approximately 30% by volume occupancy across the membrane without loss of bilayer structural integrity. These results indicate that PEO is the chemical moiety that principally drives P188 binding to bilayer membranes. No defects or phase-separated domains were observed in either P188- or PEO8.4K-incubated lipid bilayers when examined by AFM, indicating that polymer chains mingle homogeneously with lipid molecules in the bilayer. Remarkably, the breakthrough force required for penetration of the AFM tip through the bilayer membrane is unaffected by the presence of the large amount of P188 and PEO8.4K.

Cell salvage in acute and chronic wounds: a potential treatment strategy. Experimental data and early clinical results

On 9 May 2018, the authors took part in a closed panel discussion on the impact of cell salvage in acute and chronic wounds. The goal was to deliberate the possible use of plurogel micelle matrix (PMM) as a new treatment strategy for wound healing and the authors openly shared their experiences, thoughts, experimental data and early clinical results. The outcome of the panel discussion has been abridged in this paper. The cell membrane consists of a lipid bilayer, which provides a diffusion barrier separating the inside of a cell from its environment. Cell membrane injury can result in acute cellular necrosis when defects are too large and cannot be resealed. There is a potential hazard to the body when these dying cells release endogenous alarm signals referred to as 'damage (or danger) associated molecular patterns' (DAMPs), which trigger the innate immune system and modulate inflammation. Cell salvage by membrane resealing is a promising target to ensure the survival of the individual cell and prevention of further tissue degeneration by inflammatory processes. Non-ionic surfactants such as poloxamers, poloxamines and PMM have the potential to resuscitate cells by inserting themselves into damaged membranes and stabilising the unstable portions of the lipid bilayers. The amphiphilic properties of these molecules are amenable to insertion into cell wall defects and so can play a crucial, reparative role. This new approach to cell rescue or salvage has gained increasing interest as several clinical conditions have been linked to cell membrane injury via oxidative stress-mediated lipid peroxidation or thermal disruption. The repair of the cell membrane is an important step in salvaging cells from necrosis to prevent further tissue degeneration by inflammatory processes. This is applicable to acute burns and chronic wounds such as diabetic foot ulcers (DFUs), chronic venous leg ulcers (VLUs), and pressure ulcers (PUs). Experimental data shows that PMM is biocompatible and able to insert itself into damaged membranes, salvaging their barrier function and aiding cell survival. Moreover, the six case studies presented in this paper reveal the potential of this treatment strategy.

Cardiac Muscle Membrane Stabilization in Myocardial Reperfusion Injury

The phospholipid bilayer membrane that surrounds each cell in the body represents the first and last line of defense for preserving overall cell viability. In several forms of cardiac and skeletal muscle disease, deficits in the integrity of the muscle membrane play a central role in disease pathogenesis. In Duchenne muscular dystrophy, an inherited and uniformly fatal disease of progressive muscle deterioration, muscle membrane instability is the primary cause of disease, including significant heart disease, for which there is no cure or highly effective treatment. Further, in multiple clinical forms of myocardial ischemia-reperfusion injury, the cardiac sarcolemma is damaged and this plays a key role in disease etiology. In this review, cardiac muscle membrane stability is addressed, with a focus on synthetic block copolymers as a unique chemical-based approach to stabilize damaged muscle membranes. Recent advances using clinically relevant small and large animal models of heart disease are discussed. In addition, mechanistic insights into the copolymer-muscle membrane interface, featuring atomistic, molecular, and physiological structure-function approaches are highlighted. Collectively, muscle membrane instability contributes significantly to morbidity and mortality in prominent acquired and inherited heart diseases. In this context, chemical-based muscle membrane stabilizers provide a novel therapeutic approach for a myriad of heart diseases wherein the integrity of the cardiac muscle membrane is at risk.

Astrocyte Viability and Functionality in Spatially Confined Microcavitation Zone

Blast-induced traumatic brain injury (bTBI) can result in cell/tissue damage and lead to clinical and neuropsychiatric symptoms. Shock waves from a blast propagate through the brain and initiate cascades of mechanical and physiological events that can adversely affect the brain function. Although studies using animal models and brain slices have shown macroscale changes in the brain tissue in response to blast, systematic elucidation of coupling mechanisms is currently lacking. One mechanism that has been postulated and demonstrated repeatedly is the blast-induced generation and subsequent collapse of micron-size bubbles (i.e., microcavitation). Using a custom-designed exposure system, we have previously reported that upon collapsing of microbubbles, astrocytes exhibited changes in the cell viability, cellular biomechanics, production of reactive oxygen species, and activation of apoptotic signaling pathways. In this paper, we have applied microfabrication techniques and seeded astrocytes in a spatially controlled manner to determine the extent of cell damage from the site of the collapse of microbubbles. Such a novel experimental design is proven to facilitate our effort to examine the altered cell viability and functionality by monitoring the transient calcium spiking activity in real-time. We now report that the effect of microcavitation depends on the distance from which cells are seeded, and the cell functionality assessed by calcium dynamics is significantly diminished in the cells located within ∼800 μm of the collapsing microbubbles. Both calcium influx across the cell membrane via N-type calcium channels and intracellular calcium store are altered in response to microcavitation. Finally, the FDA-approved poloxamer 188 (P188) was used to reconstitute the compromised cell membrane and restore the cell's reparative capability. This finding may lead to a feasible treatment for partially mitigating the tissue damage associated with bTBI.

Muscle membrane integrity in Duchenne muscular dystrophy: recent advances in copolymer-based muscle membrane stabilizers

The scientific premise, design, and structure-function analysis of chemical-based muscle membrane stabilizing block copolymers are reviewed here for applications in striated muscle membrane injury. Synthetic block copolymers have a rich history and wide array of applications from industry to biology. Potential for discovery is enabled by a large chemical space for block copolymers, including modifications in block copolymer mass, composition, and molecular architecture. Collectively, this presents an impressive chemical landscape to leverage distinct structure-function outcomes. Of particular relevance to biology and medicine, stabilization of damaged phospholipid membranes using amphiphilic block copolymers, classified as poloxamers or pluronics, has been the subject of increasing scientific inquiry. This review focuses on implementing block copolymers to protect fragile muscle membranes against mechanical stress. The review highlights interventions in Duchenne muscular dystrophy, a fatal disease of progressive muscle deterioration owing to marked instability of the striated muscle membrane. Biophysical and chemical engineering advances are presented that delineate and expand upon current understanding of copolymer-lipid membrane interactions and the mechanism of stabilization. The studies presented here serve to underscore the utility of copolymer discovery leading toward the therapeutic application of block copolymers in Duchenne muscular dystrophy and potentially other biomedical applications in which membrane integrity is compromised.

Impact of poloxamer 188 (Pluronic F-68) additive on cell mechanical properties, quantification by real-time deformability cytometry

Advances in cellular therapies have led to the development of new approaches for cell product purification and formulation, e.g., utilizing cell endogenous properties such as size and deformability as a basis for separation from potentially harmful undesirable by-products. However, commonly used additives such as Pluronic F-68 and other poloxamer macromolecules can change the mechanical properties of cells and consequently alter their processing. In this paper, we quantified the short-term effect of Pluronic F-68 on the mechanotype of three different cell types (Jurkat cells, red blood cells, and human embryonic kidney cells) using real-time deformability cytometry. The impact of the additive concentration was assessed in terms of cell size and deformability. We observed that cells respond progressively to the presence of Pluronic F-68 within first 3 h of incubation and become significantly stiffer (p-value < 0.001) in comparison to a serum-free control and a control containing serum. We also observed that the short-term response manifested as cell stiffening is true (p-value < 0.001) for the concentration reaching 1% (w/v) of the poloxamer additive in tested buffers. Additionally, using flow cytometry, we assessed that changes in cell deformability triggered by addition of Pluronic F-68 are not accompanied by size or viability alterations.

Surfactant Copolymer Annealing of Chemically Permeabilized Cell Membranes

Structural breakdown of the cell membrane is a primary mediator in trauma induced tissue necrosis. When membrane disruption exceeds intrinsic membrane sealing processes, biocompatible multi-block amphiphilic copolymer surfactants such as Poloxamer 188 (P188) have been found to be effective in catalyze or augment sealing. Although in living cells copolymer induced sealing of membrane defects has been detected by changes in membrane transport properties, it has not been directly imaged. In this project we used Atomic force microscopy (AFM) to directly image saponin permeabilized and poloxamer sealed plasma membranes of monolayer cultured MDCK and 3T3 fibroblasts. AFM image analysis resulted in the density and diameter ranges for membrane indentations per 5×5 μm area. For control, saponin lysed, and P188 treatment of saponin lysed membranes, the supra-threshold indentation density was 3.6 ± 2.8, 13.8 ± 6.7, and 4.9 ± 3.3/cell, respectively. These results indicated that P188 catalyzed reduction in size of AFM indentations which correlated with increase cell survival. This evidence confirm that biocompatible surfactant P188 augment natural cell membrane sealing capability when intrinsic processes are incapable alone.

How the Incorporation of Pluronic Block Copolymers Modulates the Response of Lipid Membranes to Mechanical Stress

We employ atomistic molecular dynamics simulations to investigate the effect that the incorporation of the nonionic amphiphilic copolymer known as Pluronic L64 has on the mechanical stability of a DPPC membrane. The simulations reveal that the incorporation of the polymer chains leads to membranes that can sustain increasing mechanical stresses. Analysis of mechanical, structural, and dynamic properties of the membrane shows that the polymer chains interact strongly with the lipids in the vicinity, restraining their mobility and imparting better mechanical stability to the membrane. The hybrid membranes under tension remain thicker, more ordered, and stiffer in comparison to their lipid analogues. Trans-bilayer lipid movements (flip-flop) are observed and appear to be triggered by the presence of the polymer chains. A careful analysis of the pore formation under high tensions reveals two distinctive mechanisms that depend on the distribution of the hydrophilic polymer blocks in the bilayer. Finally, the rate of growth of the formed membrane defects is slowed down in the presence of polymers. These findings show that Pluronic block copolymers could be exploited for the formation of optimized hybrid nanodevices with controlled elastic and dynamic properties.

Surfactant-free Colloidal Particles with Specific Binding Affinity

Colloidal particles with specific binding affinity are essential for in vivo and in vitro biosensing, targeted drug delivery, and micrometer-scale self-assembly. Key to these techniques are surface functionalizations that provide high affinities to specific target molecules. For stabilization in physiological environments, current particle coating methods rely on adsorbed surfactants. However, spontaneous desorption of these surfactants typically has an undesirable influence on lipid membranes. To address this issue and create particles for targeting molecules in lipid membranes, we present here a surfactant-free coating method that combines high binding affinity with stability at physiological conditions. After activating charge-stabilized polystyrene microparticles with EDC/Sulfo-NHS, we first coat the particles with a specific protein and subsequently covalently attach a dense layer of poly(ethyelene) glycol. This polymer layer provides colloidal stability at physiological conditions as well as antiadhesive properties, while the protein coating provides the specific affinity to the targeted molecule. We show that NeutrAvidin-functionalized particles bind specifically to biotinylated membranes and that Concanavalin A-functionalized particles bind specifically to the glycocortex of Dictyostelium discoideum cells. The affinity of the particles changes with protein density, which can be tuned during the coating procedure. The generic and surfactant-free coating method reported here transfers the high affinity and specificity of a protein onto colloidal polystyrene microparticles.

Ocular ketoconazole-loaded proniosomal gels: formulation, ex vivo corneal permeation and in vivo studies

Context: Vesicular drug carriers for ocular delivery have gained a real potential. Proniosomal gels as ocular drug carriers have been proven to be an effective way to improve bioavailability and patient compliance.

Objective: Formulation and in vitro/ex vivo/in vivo characterization of ketoconazole (KET)-loaded proniosomal gels for the treatment of ocular keratitis.

Materials and methods: The effect of formulation variables; HLB value, type and concentration of non-ionic surfactants (Tweens, Spans, Brijs and Pluronics) with or without lecithin on the entrapment efficiency (EE%), vesicle size and in vitro KET release was evaluated. An ex vivo corneal permeation study to determine the level of KET in the external eye tissue of albino rabbits and an in vivo assessment of the level of KET in the aqueous humors were performed.

Results and discussion: In vivo evaluation showed an increase in bioavailability up to 20-folds from the optimum KET proniosomal gel formula in the aqueous humor compared to drug suspension (KET-SP). The selected formulae were composed of spans being hydrophobic suggesting the potential use of a more hydrophobic surfactant as Span during the formulation of formulae. Factors that stabilize the vesicle membrane and increase the entrapment efficiency of KET (namely low HLB, long alkyl chain, high phase transition temperature) slowed down the release profile.

Conclusions: Proniosomal gels as drug delivery carriers were proven to be a promising approach to increase corneal contact and permeation as well as retention time in the eye resulting in a sustained action and enhanced bioavailability.

Millimeter-area, free standing, phospholipid bilayers

Minimal model biomembrane studies have the potential to unlock the fundamental mechanisms of cellular function that govern the processes upon which life relies. However, existing methods to fabricate free-standing model membranes currently have significant limitations. Bilayer sizes are often tens of micrometers, decoupling curvature or substrate effects, orthogonal control over tension, and solvent exchange combined with microscopy techniques is not possible, which restricts the studies that can be performed. Here, we describe a versatile platform to generate free standing, planar, phospholipid bilayers with millimeter scale areas. The technique relies on an adapted thin-film balance apparatus allowing for the dynamic control of the nucleation and growth of a planar black lipid membrane in the center of an orifice surrounded by microfluidic channels. Success is demonstrated using several different lipid types, including mixtures that show the same temperature dependent phase separation as existing protocols, moreover, membranes are highly stable. Two advantages unique to the proposed method are the dynamic control of the membrane tension and the possibility to make extremely large area membranes. We demonstrate this by showing how a block polymer, F68, used in drug delivery increases the membrane compliance. Together, the results demonstrate a new paradigm for studying the mechanics, structure, and function of model membranes.

Properties of Poloxamer Molecules and Poloxamer Micelles Dissolved in Water and Next to Lipid Bilayers: Results from Computer Simulations

To study the properties of poloxamer molecules P85 and P188 and micelles containing these poloxamers in bulk water and also next to lipid bilayers, we performed coarse-grained molecular dynamics computer simulations. We used MARTINI force-field and adjusted Lennard-Jones nonbonded interaction strength parameters for poloxamer beads to take into account the presence of polarizable water. Simulations of systems containing poloxamer molecules or micelles solvated in bulk water showed that structural properties, such as radii of gyration of the molecules and micelles, agree with the ones inferred from experiments. We observed that P85 micelle is almost spherical in shape, whereas the P188 micelle is distorted from being spherical. Simulations containing systems with the water-lipid bilayer interface showed that hydrophilic blocks of poloxamers interact with lipid headgroups of the bilayer and remain at the interface, whereas hydrophobic blocks prefer to insert into the central hydrophobic region of the bilayer. Simulations containing poloxamer micelles next to lipid bilayer showed no permeation of these micelles into the bilayer. To study the "healing" properties of P188 poloxamer, we performed simulations on a system containing a P188 micelle next to "damaged" lipid bilayer containing a pore. We observed that hydrophobic chains of poloxamers got inserted into the bilayer through the pore region, ultimately closing the pore.

Visualizing monolayers with a water-soluble fluorophore to quantify adsorption, desorption, and the double layer

Contrast in confocal microscopy of phase-separated monolayers at the air-water interface can be generated by the selective adsorption of water-soluble fluorescent dyes to disordered monolayer phases. Optical sectioning minimizes the fluorescence signal from the subphase, whereas convolution of the measured point spread function with a simple box model of the interface provides quantitative assessment of the excess dye concentration associated with the monolayer. Coexisting liquid-expanded, liquid-condensed, and gas phases could be visualized due to differential dye adsorption in the liquid-expanded and gas phases. Dye preferentially adsorbed to the liquid-disordered phase during immiscible liquid-liquid phase coexistence, and the contrast persisted through the critical point as shown by characteristic circle-to-stripe shape transitions. The measured dye concentration in the disordered phase depended on the phase composition and surface pressure, and the dye was expelled from the film at the end of coexistence. The excess concentration of a cationic dye within the double layer adjacent to an anionic phospholipid monolayer was quantified as a function of subphase ionic strength, and the changes in measured excess agreed with those predicted by the mean-field Gouy-Chapman equations. This provided a rapid and noninvasive optical method of measuring the fractional dissociation of lipid headgroups and the monolayer surface potential.

Langmuir monolayers as models to study processes at membrane surfaces

The use of new sophisticated and highly surface sensitive techniques as synchrotron based X-ray scattering techniques and in-house infrared reflection absorption spectroscopy (IRRAS) has revolutionized the monolayer research. Not only the determination of monolayer structures but also interactions between amphiphilic monolayers at the soft air/liquid interface and molecules dissolved in the subphase are important for many areas in material and life sciences. Monolayers are convenient quasi-two-dimensional model systems. This review focuses on interactions between amphiphilic molecules in binary and ternary mixtures as well as on interfacial interactions with interesting biomolecules dissolved in the subphase. The phase state of monolayers can be easily triggered at constant temperature by increasing the packing density of the lipids by compression. Simultaneously the monolayer structure changes are followed in situ by grazing incidence X-ray diffraction or IRRAS. The interactions can be indirectly determined by the observed structure changes. Additionally, the yield of enzymatic reaction can be quantitatively determined, secondary structures of peptides and proteins can be measured and compared with those observed in bulk. In this way, the influence of a confinement on the structural properties of biomolecules can be determined. The adsorption of DNA can be quantified as well as the competing adsorption of ions at charged interfaces. The influence of modified nanoparticles on model membranes can be clearly determined. In this review, the relevance and utility of Langmuir monolayers as suitable models to study physical and chemical interactions at membrane surfaces are clearly demonstrated.

Uncoupling of increased cellular oxidative stress and myocardial ischemia reperfusion injury by directed sarcolemma stabilization

Myocardial ischemia/reperfusion (I/R) injury is a major clinical problem leading to cardiac dysfunction and myocyte death. It is widely held that I/R causes damage to membrane phospholipids, and is a significant mechanism of cardiac I/R injury. Molecular dissection of sarcolemmal damage in I/R, however, has been difficult to address experimentally. We studied here cardiac I/R injury under conditions targeting gain- or loss-of sarcolemma integrity. To implement gain-in-sarcolemma integrity during I/R, synthetic copolymer-based sarcolemmal stabilizers (CSS), including Poloxamer 188 (P188), were used as a tool to directly stabilize the sarcolemma. Consistent with the hypothesis of sarcolemmal stabilization, cellular markers of necrosis and apoptosis evident in untreated myocytes were fully blocked in sarcolemma stabilized myocytes. Unexpectedly, sarcolemmal stabilization of adult cardiac myocytes did not affect the status of myocyte-generated oxidants or lipid peroxidation in two independent assays. We also investigated the loss of sarcolemmal integrity using two independent genetic mouse models, dystrophin-deficient mdx or dysferlin knockout (Dysf KO) mice. Both models of sarcolemmal loss-of-function were severely affected by I/R injury ex vivo, and this was lessened by CSS. In vivo studies also showed that infarct size was significantly reduced in CSS-treated hearts. Mechanistically, these findings support a model whereby I/R-mediated increased myocyte oxidative stress is uncoupled from myocyte injury. Because the sarcolemma stabilizers used here do not transit across the myocyte membrane this is evidence that intracellular targets of oxidants are not sufficiently altered to affect cell death when sarcolemma integrity is preserved by synthetic stabilizers. These findings, in turn, suggest that sarcolemma destabilization, and consequent Ca(2+) mishandling, as a focal initiating mechanism underlying myocardial I/R injury.

Acoustic characterization and pharmacokinetic analyses of new nanobubble ultrasound contrast agents

In contrast to the clinically used microbubble ultrasound contrast agents, nanoscale bubbles (or nanobubbles) may potentially extravasate into tumors that exhibit more permeable vasculature, facilitating targeted molecular imaging and drug delivery. Our group recently presented a simple strategy using the non-ionic surfactant Pluronic as a size control excipient to produce nanobubbles with a mean diameter of 200 nm that exhibited stability and echogenicity on par with microbubbles. The objective of this study was to carry out an in-depth characterization of nanobubble properties as compared with Definity microbubbles, both in vitro and in vivo. Through use of a tissue-mimicking phantom, in vitro experiments measured the echogenicity of the contrast agent solutions and the contrast agent dissolution rate over time. Nanobubbles were found to be more echogenic than Definity microbubbles at three different harmonic frequencies (8, 6.2 and 3.5 MHz). Definity microbubbles also dissolved 1.67 times faster than nanobubbles. Pharmacokinetic studies were then performed in vivo in a subcutaneous human colorectal adenocarcinoma (LS174T) in mice. The peak enhancement and decay rates of contrast agents after bolus injection in the liver, kidney and tumor were analyzed. No significant differences were observed in peak enhancement between the nanobubble and Definity groups in the three tested regions (tumor, liver and kidney). However, the decay rates of nanobubbles in tumor and kidney were significantly slower than those of Definity in the first 200-s fast initial phase. There were no significant differences in the decay rates in the liver in the initial phase or in three regions of interest in the terminal phase. Our results suggest that the stability and acoustic properties of the new nanobubble contrast agents are superior to those of the clinically used Definity microbubbles. The slower washout of nanobubbles in tumors suggests potential entrapment of the bubbles within the tumor parenchyma.

Bax and Bak function as the outer membrane component of the mitochondrial permeability pore in regulating necrotic cell death in mice

A critical event in ischemia-based cell death is the opening of the mitochondrial permeability transition pore (MPTP). However, the molecular identity of the components of the MPTP remains unknown. Here, we determined that the Bcl-2 family members Bax and Bak, which are central regulators of apoptotic cell death, are also required for mitochondrial pore-dependent necrotic cell death by facilitating outer membrane permeability of the MPTP. Loss of Bax/Bak reduced outer mitochondrial membrane permeability and conductance without altering inner membrane MPTP function, resulting in resistance to mitochondrial calcium overload and necrotic cell death. Reconstitution with mutants of Bax that cannot oligomerize and form apoptotic pores, but still enhance outer membrane permeability, permitted MPTP-dependent mitochondrial swelling and restored necrotic cell death. Our data predict that the MPTP is an inner membrane regulated process, although in the absence of Bax/Bak the outer membrane resists swelling and prevents organelle rupture to prevent cell death.

DOI:http://dx.doi.org/10.7554/eLife.00772.001

In all multicellular plants and animals, cells are continuously dying and being replaced. There are a number of different types of cell death, but two of the best studied are apoptosis and necrosis. Apoptosis, sometimes referred to as ‘cell suicide’, is a form of programmed cell death that is generally beneficial to the organism. Necrosis, however, occurs whenever cells are damaged—for example, due to a lack of oxygen—and can trigger harmful inflammation in surrounding tissue. Although the processes leading up to apoptosis and necrosis are very different, they both involve regulated changes in mitochondria—the organelles that supply cells with chemical energy.

Mitochondria have a distinctive appearance, being enclosed by two membranes, the innermost of which is highly folded. During apoptosis, large pores form in the outer membranes of mitochondria. These pores are generated by two proteins—Bax and Bak—and they enable the mitochondrion to release proteins that activate processes involved in apoptosis. Pores also form in the mitochondrial membrane during necrosis. However, these mitochondrial permeability transition pores (MPTPs) occur simultaneously in both the inner and outer membranes and are thought to lead to swelling and rupture of mitochondria.

Now, Karch et al. have shown that Bax and Bak are also involved in the formation of these permeability pores that underlie necrosis. When mouse cells that had been genetically modified to lack Bak and Bax were grown in cell culture, they were found to be resistant to substances that normally induce necrosis. Instead, their mitochondria continued to function normally, suggesting that MPTPs cannot form in the absence of Bak and Bax.

Karch et al. then generated mice with heart cells that lack Bax and Bak, and deprived their hearts of oxygen to simulate a heart attack. Compared to normal mice, the genetically modified animals experienced less damage to their heart muscle, suggesting that the absence of Bax and Bak prevents cell death due to necrosis. If Bax and Bak are involved in both apoptosis and necrosis, inhibiting them could be a powerful therapeutic approach for preventing all forms of cell death during heart attacks or in certain degenerative diseases.

DOI:http://dx.doi.org/10.7554/eLife.00772.002

The membrane-active tri-block copolymer pluronic F-68 profoundly rescues rat hippocampal neurons from oxygen-glucose deprivation-induced death through early inhibition of apoptosis

Pluronic F-68, an 80% hydrophilic member of the Pluronic family of polyethylene-polypropylene-polyethylene tri-block copolymers, protects non-neuronal cells from traumatic injuries and rescues hippocampal neurons from excitotoxic and oxidative insults. F-68 interacts directly with lipid membranes and restores membrane function after direct membrane damage. Here, we demonstrate the efficacy of Pluronic F-68 in rescuing rat hippocampal neurons from apoptosis after oxygen-glucose deprivation (OGD). OGD progressively decreased neuronal survival over 48 h in a severity-dependent manner, the majority of cell death occurring after 12 h after OGD. Administration of F-68 for 48 h after OGD rescued neurons from death in a dose-dependent manner. At its optimal concentration (30 μm), F-68 rescued all neurons that would have died after the first hour after OGD. This level of rescue persisted when F-68 administration was delayed 12 h after OGD. F-68 did not alter electrophysiological parameters controlling excitability, NMDA receptor-activated currents, or NMDA-induced increases in cytosolic calcium concentrations. However, F-68 treatment prevented phosphatidylserine externalization, caspase activation, loss of mitochondrial membrane potential, and BAX translocation to mitochondria, indicating that F-68 alters apoptotic mechanisms early in the intrinsic pathway of apoptosis. The profound neuronal rescue provided by F-68 after OGD and the high level of efficacy with delayed administration indicate that Pluronic copolymers may provide a novel, membrane-targeted approach to rescuing neurons after brain ischemia. The ability of membrane-active agents to block apoptosis suggests that membranes or their lipid components play prominent roles in injury-induced apoptosis.

Cardiac phenotype of Duchenne Muscular Dystrophy: insights from cellular studies

Dilated cardiomyopathy is a serious and almost inevitable complication of Duchenne Muscular Dystrophy, a devastating and fatal disease of skeletal muscle resulting from the lack of functional dystrophin, a protein linking the cytoskeleton to the extracellular matrix. Ultimately, it leads to congestive heart failure and arrhythmias resulting from both cardiac muscle fibrosis and impaired function of the remaining cardiomyocytes. Here we summarize findings obtained in several laboratories, focusing on cellular mechanisms that result in degradation of cardiac functions in dystrophy.

Insertion mechanism of a poly(ethylene oxide)-poly(butylene oxide) block copolymer into a DPPC monolayer

Interactions between amphiphilic block copolymers and lipids are of medical interest for applications such as drug delivery and the restoration of damaged cell membranes. A series of monodisperse poly(ethylene oxide)-poly(butylene oxide) (EOBO) block copolymers were obtained with two ratios of hydrophilic/hydrophobic block lengths. We have explored the surface activity of EOBO at a clean interface and under 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayers as a simple cell membrane model. At the same subphase concentration, EOBO achieved higher equilibrium surface pressures under DPPC compared to a bare interface, and the surface activity was improved with longer poly(butylene oxide) blocks. Further investigation of the DPPC/EOBO monolayers showed that combined films exhibited similar surface rheology compared to pure DPPC at the same surface pressures. DPPC/EOBO phase separation was observed in fluorescently doped monolayers, and within the liquid-expanded liquid-condensed coexistence region for DPPC, EOBO did not drastically alter the liquid-condensed domain shapes. Grazing incidence X-ray diffraction (GIXD) and X-ray reflectivity (XRR) quantitatively confirmed that the lattice spacings and tilt of DPPC in lipid-rich regions of the monolayer were nearly equivalent to those of a pure DPPC monolayer at the same surface pressures.

Effects of PEO-PPO-PEO triblock copolymers on phospholipid membrane integrity under osmotic stress

The effects of PEO-PPO-PEO triblock copolymers, mainly Poloxamer 188, on phospholipid membrane integrity under osmotic gradients were explored using giant unilamellar vesicles (GUVs). Fluorescence leakage assays showed two opposing effects of P188 on the structural integrity of GUVs depending on the duration of their incubation time. A two-state transition mechanism of interaction between the triblock copolymers and the phospholipid membrane is proposed: an adsorption (I) and an insertion (II) state. While the triblock copolymer in state I acts to moderately retard the leakage, their insertion in state II perturbs the lipid packing, thus increasing the membrane permeability. Our results suggest that the biomedical application of PEO-PPO-PEO triblock copolymers, either as cell membrane resealing agents or as accelerators for drug delivery, is directed by the delicate balance between these two states.

Overcoming rapid inactivation of lung surfactant: analogies between competitive adsorption and colloid stability

Lung surfactant (LS) is a mixture of lipids and proteins that line the alveolar air-liquid interface, lowering the interfacial tension to levels that make breathing possible. In acute respiratory distress syndrome (ARDS), inactivation of LS is believed to play an important role in the development and severity of the disease. This review examines the competitive adsorption of LS and surface-active contaminants, such as serum proteins, present in the alveolar fluids of ARDS patients, and how this competitive adsorption can cause normal amounts of otherwise normal LS to be ineffective in lowering the interfacial tension. LS and serum proteins compete for the air-water interface when both are present in solution either in the alveolar fluids or in a Langmuir trough. Equilibrium favors LS as it has the lower equilibrium surface pressure, but the smaller proteins are kinetically favored over multi-micron LS bilayer aggregates by faster diffusion. If albumin reaches the interface, it creates an energy barrier to subsequent LS adsorption that slows or prevents the adsorption of the necessary amounts of LS required to lower surface tension. This process can be understood in terms of classic colloid stability theory in which an energy barrier to diffusion stabilizes colloidal suspensions against aggregation. This analogy provides qualitative and quantitative predictions regarding the origin of surfactant inactivation. An important corollary is that any additive that promotes colloid coagulation, such as increased electrolyte concentration, multivalent ions, hydrophilic non-adsorbing polymers such as PEG, dextran, etc. added to LS, or polyelectrolytes such as chitosan, also promotes LS adsorption in the presence of serum proteins and helps reverse surfactant inactivation. The theory provides quantitative tools to determine the optimal concentration of these additives and suggests that multiple additives may have a synergistic effect. A variety of physical and chemical techniques including isotherms, fluorescence microscopy, electron microscopy and X-ray diffraction show that LS adsorption is enhanced by this mechanism without substantially altering the structure or properties of the LS monolayer.

Interaction of poloxamers with liposomes: an isothermal titration calorimetry study

The interaction between lipid bilayers and poloxamers has recently attracted much attention, and contradicting effects of poloxamers have been revealed on the integrity of lipid membranes; poloxamers are reported to be either effective sealants or permeabilizers of cell membranes depending on the cell type. To elucidate poloxamer-membrane interactions, we study the roles played by the lipid bilayer phase structure, poloxamer concentration, and temperature using isothermal titration calorimetry (ITC). Our results indicate that the lipid bilayer phase structure plays a critical role in its interaction with poloxamers. Poloxamers are found to partition only into fluid-phase, not gel-phase, membranes. Moreover, the partitioning of poloxamers into fluid-phase liposomes increases with temperature, owing to the enhancement in both the membrane fluidity and the hydrophobicity of the poloxamer at elevated temperatures. Our ITC results also point to a saturation concentration of poloxamers, below which poloxamers can partition into a lipid bilayer without disrupting liposomes and above which they instead disintegrate liposomes into micelles. To address the long-standing question as to whether poloxamers migrate through the lipid bilayer after their adsorption onto preformed liposomes, two ITC protocols are used to cross-validate the distribution of poloxamers over the two leaflets in the bilayer. We find that on a short timescale (approximately 200 min) poloxamers partition into the outer leaflet of the fluid-phase lipid bilayer without much interactions with the inner leaflet. However, on a longer timescale (38 h), they are found to migrate through the bilayer and eventually establish an even distribution in both the inner and outer leaflets of the membrane.

X-ray diffraction and reflectivity validation of the depletion attraction in the competitive adsorption of lung surfactant and albumin

Lung surfactant (LS) and albumin compete for the air-water interface when both are present in solution. Equilibrium favors LS because it has a lower equilibrium surface pressure, but the smaller albumin is kinetically favored by faster diffusion. Albumin at the interface creates an energy barrier to subsequent LS adsorption that can be overcome by the depletion attraction induced by polyethylene glycol (PEG) in solution. A combination of grazing incidence x-ray diffraction (GIXD), x-ray reflectivity (XR), and pressure-area isotherms provides molecular-resolution information on the location and configuration of LS, albumin, and polymer. XR shows an average electron density similar to that of albumin at low surface pressures, whereas GIXD shows a heterogeneous interface with coexisting LS and albumin domains at higher surface pressures. Albumin induces a slightly larger lattice spacing and greater molecular tilt, similar in effect to a small decrease in the surface pressure. XR shows that adding PEG to the LS-albumin subphase restores the characteristic LS electron density profile at the interface, and confirms that PEG is depleted near the interface. GIXD shows the same LS Bragg peaks and Bragg rods as on a pristine interface, but with a more compact lattice corresponding to a small increase in the surface pressure. These results confirm that albumin adsorption creates a physical barrier that inhibits LS adsorption, and that PEG in the subphase generates a depletion attraction between the LS aggregates and the interface that enhances LS adsorption without substantially altering the structure or properties of the LS monolayer.

A comparative study on the interactions of SMAP-29 with lipid monolayers

This work investigates the discrimination of lipid monolayers by the ovine antimicrobial peptide SMAP-29 and compares it to that of the human LL-37 peptide. Fluid phospholipid monolayers were formed in a Langmuir trough and subsequently studied with the X-ray scattering techniques of X-ray reflectivity and grazing incidence X-ray diffraction. Any changes in the phospholipid structure after injection of peptide under the monolayer were considered to be due to interactions between the peptides and lipids. The data show that SMAP-29 discriminates against negatively charged phospholipids in a similar way to LL-37. However, it is even more interesting to note that despite a higher concentration of SMAP-29 near the monolayer, ensured by its greater charge as compared to LL-37, the amount of SMAP-29 needed to observe monolayer disruption was around three and a half times the number of molecules of LL-37 used to see similar changes with the same system. This result suggests that the structure, amino acid sequence or size of the peptide may well be as important as electrical charge and therefore gives many implications for the further study of antimicrobial peptides with regards to novel drug design and development.

Poloxamer 188 copolymer membrane sealant rescues toxicity of amyloid oligomers in vitro

Amyloid oligomers and protofibrils increase cell membrane permeability, eventually leading to cell death. Here, we demonstrate that amyloid oligomer toxicity and membrane permeabilization can be reversed using the membrane sealant copolymer poloxamer 188. The data indicate that amyloid oligomer toxicity is caused by defects in the lipid bilayer of the type that are sealed by poloxamer 188. Our results also suggest the possibility of using polymer-based membrane sealants to prevent or reverse amyloid oligomer toxicity in vivo. Because the ability to permeabilize membranes is a generic property of amyloid oligomers, this therapeutic approach may be effective for the treatment of many degenerative diseases caused in part by the interaction of misfolded proteins with cell membranes, as in Alzheimer's disease, type II diabetes, and a host of others.

Effects of block copolymer's architecture on its association with lipid membranes: experiments and simulations

Triblock copolymers of the form poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) have been shown to effectively interact with and restore activity of damaged cell membranes. To better understand the interaction between these polymers and cell membranes, we have modeled the outer leaflet of a cell membrane with a lipid monolayer spread at the air-water interface and injected poloxamers of varying architectures into the subphase beneath the monolayer. Subsequent interactions of the polymer with the monolayer upon compression were monitored with concurrent Langmuir isotherm and fluorescence microscopy measurements. Monte Carlo simulations were run in parallel using a coarse-grained model to capture interactions between lipids and poloxamers. Changing the ratio of the PEO to PPO block lengths (NPEO:NPPO) affects the equilibrium spreading pressure of the polymer. Poloxamers with a relatively longer central hydrophobic block are less soluble, resulting in more polymer adsorbed to the interface and therefore a higher equilibrium spreading pressure. Simulation results show that changing the poloxamer structure effectively affects its solubility. This is also reflected in the degree of lipid corralling as poloxamers with a higher chemical potential (and resulting higher equilibrium spreading pressure) cause the neighboring lipid domains to be more ordered. Upon lateral compression of the monolayers, the polymer is expelled from the film beyond a certain squeeze-out pressure. A poloxamer with a higher NPEO:NPPO ratio (with either NPEO or NPPO held constant in each series) has a lower squeeze-out pressure. Likewise when the total size of the polymer is varied with a constant hydrophilic:hydrophobic ratio, smaller poloxamers are squeezed out at a lower pressure. Our simulation results capture the trends of our experimental observations, both indicating how the interactions between lipids and poloxamers can be tuned by the polymer architecture.

Temperature dependence of poloxamer insertion into and squeeze-out from lipid monolayers

F68, a triblock copolymer of the form poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is found to effectively seal damaged cell membranes. To better understand the molecular interaction between F68 and cells, we have modeled the outer leaflet of a cell membrane with a dipalmitoylphosphatidylcholine (DPPC) monolayer spread at the air-water interface and introduced poloxamer into the subphase. Subsequent interactions of the polymer with the monolayer either upon expansion or compression were monitored using concurrent Langmuir isotherm and fluorescence microscopy measurements. To alter the activity of the poloxamer, a range of subphase temperatures from 5 to 37 degrees C was used. Lower temperatures increase the solubility of the poloxamer in the subphase and therefore lessen the amount of material at the interface, resulting in a lower equilibrium spreading pressure. Additionally, changes in temperature affect the phase behavior of DPPC. Below the triple point, the monolayer is condensed at pertinent polymer insertion pressures; for temperatures immediately above the triple point, the monolayer is a heterogeneous mix of liquid expanded and condensed phase; for the highest temperature measured, the DPPC monolayer remains completely fluid. At all temperatures, F68 inserts into DPPC monolayers at its equilibrium spreading pressure. Upon compression of the monolayer, polymers are squeezed-out at surface pressures notably higher than those for insertion, with higher temperatures leading to a higher squeeze-out pressure. An increase in temperature decreases the solvent quality of water for the poloxamer, lowering solubility of the polymer in the subphase and thus increasing its propensity to be maintained within the monolayer to higher pressures.

Resealing of electroporation of porcine epidermis using phospholipids and poloxamers

The resealing of porcine epidermis after electroporation is investigated. Porcine epidermis was subjected to electroporation (30 pulses at 100 V, 1 ms and at 1 Hz) in a vertical diffusion apparatus, in the presence of 2 mg/ml dimyristoylphosphatidylserine, to produce a long lasting permeable state. Resealing treatments include incubation in 0.0625-0.25 mM poloxamer 188 (P188), or incorporation of phosphatidylcholines (PC) and/or cationic lipids with additional pulses. The recovery of electric resistance of the epidermis samples after electroporation with or without resealing treatments was monitored. The transports of carboxyfluorescein and glucose were measured during the recovery process. Both P188 and PC were effective in resealing in terms of electric conductance and transport, with P188 reacting more rapidly and completely. P188 mediated lipid exchange between stratum corneum lipid particles was measured by fluorescence resonance energy transfer (FRET). Lipid reorganization facilitated by P188 and PC is suggested to be a major resealing mechanism of electroporation damage.

Hyperlipidemia and surfactants: The liver sieve is a link

Poloxamer 407 is a ubiquitous synthetic surfactant that causes massive hyperlipidemia and atherosclerosis in the rodent. The initial step in hepatic metabolism of lipoproteins is their transfer through 100-200 nm pores (fenestrations) in the liver sinusoidal endothelial cell, prior to receptor-mediated uptake. The 'liver sieve hypothesis' emphasizes the role of these fenestrations in the regulation of lipoprotein disposition. Here we show that P407 causes dramatic defenestration of the liver sinusoidal endothelium in vivo. By 24h after intraperitoneal administration in mice, fenestrations were reduced by approximately 80% coincident with a 10-fold increase in plasma lipids. Moreover impulse-response experiments in the perfused rat liver showed that P407 prevented the passage of small chylomicrons across the liver sinusoidal endothelium. Defenestration was also induced acutely with P407 in isolated liver sinusoidal endothelial cells, indicating this is a direct effect of P407 on fenestrations. The results establish the role of the porosity of the liver sinusoidal endothelial cell as a pivotal yet relatively unrecognised mechanism for hyperlipidemia. Furthermore, the results establish an intriguing mechanism for surfactant-induced hyperlipidemia. Thus the liver sieve is a new and untapped target for the treatment and prevention of hyperlipidemia.

Enhancement of drug absorption by noncharged detergents through membrane and P-glycoprotein binding

Noncharged detergents are used as excipients in drug formulations. Until recently, they were considered as inert compounds, enhancing drug absorption essentially by improving drug solubility. However, many detergents insert into lipid membranes, although to different extents, and change the lateral packing density of membranes at high concentrations. Moreover, they bind to the efflux transporter P-glycoprotein (P-gp) and most likely to related transporters and metabolising enzymes with overlapping substrate specificities. If their affinity to P-gp is higher than that of the coadministered drug they act as modulators or inhibitors of P-gp and enhance drug absorption. Inhibition of P-gp and related proteins can, however, cause severe side effects. This paper first reviews the membrane binding propensity of different noncharged detergents (including poloxamers) and discusses their ability to bind to P-gp. Second, literature data on drug uptake enhancement by noncharged detergents, obtained in vivo and in vitro, are analysed at the molecular level. The present analysis provides the tools for an approximate and simple prior estimate of the membrane and P-gp binding ability of noncharged detergents based on a modular binding approach.

Rearrangement of lipid ordered phases upon protein adsorption due to multiple site binding

This study involves the interactions of proteins with Langmuir monolayers of a metal-chelating lipid, where adsorption is driven by a strong specific interaction between histidines on the proteins and divalent metal ions loaded into the lipid headgroups. A comparison of the structural rearrangement of the lipid film upon adsorption of myoglobin and a synthetic peptide, each of which have multiple histidines, with that upon the adsorption of lysozyme, which has only one histidine, suggests that the lipid rearrangement in the former case is due to the multiplicity of binding sites. The kinetics and manner of rearrangement change with the binding energy and film pressure.

Lipid headgroup discrimination by antimicrobial peptide LL-37: insight into mechanism of action

Interaction of the human antimicrobial peptide LL-37 with lipid monolayers has been investigated by a range of complementary techniques including pressure-area isotherms, insertion assay, epifluorescence microscopy, and synchrotron x-ray scattering, to analyze its mechanism of action. Lipid monolayers were formed at the air-liquid interface to mimic the surface of the bacterial cell wall and the outer leaflet of erythrocyte cell membrane by using phosphatidylglycerol (DPPG), phosphatidylcholine (DPPC), and phosphatidylethanolamine (DPPE) lipids. LL-37 is found to readily insert into DPPG monolayers, disrupting their structure and thus indicating bactericidal action. In contrast, DPPC and DPPE monolayers remained virtually unaffected by LL-37, demonstrating its nonhemolytic activity and lipid discrimination. Specular x-ray reflectivity data yielded considerable differences in layer thickness and electron-density profile after addition of the peptide to DPPG monolayers, but little change was seen after peptide injection when probing monolayers composed of DPPC and DPPE. Grazing incidence x-ray diffraction demonstrated significant peptide insertion and lateral packing order disruption of the DPPG monolayer by LL-37 insertion. Epifluorescence microscopy data support these findings.

Cluster structure and corralling effect driven by interaction mismatch in two dimensional mixtures

The formation of clusters with crystal-like order in two dimensions is studied using Monte Carlo simulations. We find that the necessary conditions to induce the formation of clusters of one component is to add a second component that has a larger size and that has a long-range soft repulsive interaction with its own kind but not with the other one. The clusters of the small particles are found to be surrounded by a network of quasi-one-dimensional arrangements of the larger particles. The degree of order of the clusters is found to depend on the concentration of the larger particles. The findings explain recent experimental observations on lipid-poloxamer mixtures and they provide guidelines for how to form ordered clusters of nanoparticles in two dimensions.

Lipid composition determines interaction of liposome membranes with Pluronic L61

Triblock copolymers of ethylene oxide (EO) and propylene oxide (PO) of EO(n/2)PO(m)EO(n/2) type (Pluronics) demonstrate a variety of biological effects that are mainly due to their interaction with cell membranes. Previously, we have shown that Pluronics can bind to artificial lipid membranes and enhance accumulation of the anti-tumor drug doxorubicin (DOX) inside the pH-gradient liposomes and transmembrane migration (flip-flop) of NBD-labeled phosphatidylethanolamine in the liposomes composed from one component-lecithin. Here, we describe the effects caused by insertion of other natural lipids in lecithin liposomes and the significance of the lipid composition for interaction of Pluronic L61 with the membrane. We used binary liposomes consisting of lecithin and one of the following lipids: cholesterol, phosphatidylethanolamine, ganglioside GM1, sphingomyelin, cardiolipin or phosphatidic acid. The influence of the additives on (1) membrane microviscosity; (2) binding of Pluronic L61; (3) the copolymer effect on lipid flip-flop and membrane permeability towards DOX was studied. The results showed that insertion of sphingomyelin and cardiolipin did not influence membrane microviscosity and effects of Pluronic on the membrane permeability. Addition of phosphatidic acid led to a decrease in microviscosity of the bilayer and provoked its destabilization by the copolymer. On the contrary, cholesterol increased microviscosity of the membrane and decreased binding of Pluronic and its capacity to enhance flip-flop and DOX accumulation. Analogous tendencies were revealed upon incorporation of egg phosphatidylethanolamine or bovine brain ganglioside GM1. Thus, a reverse dependence between the microviscosity of membranes and their sensitivity to Pluronic effects was demonstrated. The described data may be relevant to mechanisms of Pluronic L61 interaction with normal and tumor cells.